diff options
Diffstat (limited to 'Master/texmf-dist/source')
| -rw-r--r-- | Master/texmf-dist/source/latex/achemso/achemso.dtx | 4792 | ||||
| -rw-r--r-- | Master/texmf-dist/source/latex/achemso/achemso.ins | 130 | ||||
| -rw-r--r-- | Master/texmf-dist/source/latex/achemso/natmove.dtx | 601 | ||||
| -rw-r--r-- | Master/texmf-dist/source/latex/achemso/natmove.ins | 41 |
4 files changed, 2608 insertions, 2956 deletions
diff --git a/Master/texmf-dist/source/latex/achemso/achemso.dtx b/Master/texmf-dist/source/latex/achemso/achemso.dtx index 11e63281c69..5eef35a7f5e 100644 --- a/Master/texmf-dist/source/latex/achemso/achemso.dtx +++ b/Master/texmf-dist/source/latex/achemso/achemso.dtx @@ -1,157 +1,88 @@ % \iffalse meta-comment -% -% Portions copyright (C) 1989-2003 by -% Donald Arseneau -% Copyright (C) 1996-98 by -% Mats Dahlgren -% Copyright (C) 2007-08 by -% Joseph Wright <joseph.wright@morningstar2.co.uk> -% -% Part of this bundle is derived from cite.sty, to which the following -% license applies: -%-------------------------------------------------------------------- -% Copyright (C) 1989-2003 by Donald Arseneau -% These macros may be freely transmitted, reproduced, or modified -% provided that this notice is left intact. -%-------------------------------------------------------------------- -% -% This work may be distributed and/or modified under the -% conditions of the LaTeX Project Public License, either -% version 1.3c of this license or (at your option) any later -% version. The latest version of this license is in -% http://www.latex-project.org/lppl.txt -% and version 1.3c or later is part of all distributions of -% LaTeX version 2005/12/01 or later. -% -% This work has the LPPL maintenance status `maintained'. -% -% The current maintainer of this work is Joseph Wright. -% -% This work consists of the source file achemso.dtx -% and the derived files achemso.ins, -% achemso.cls, -% achemso.sty, -% achemso.pdf, -% achemso-manual.pdf, -% achemso-demo.ltx, -% achemso.bst, -% biochem.bst, -% achre4.cfg, -% acbcct.cfg, -% ancac3.cfg, -% ancham.cfg, -% bichaw.cfg, -% bcches.cfg, -% bomaf6.cfg, -% bipret.cfg, -% crtoec.cfg, -% chreay.cfg, -% cmatex.cfg, -% cgdefu.cfg, -% enfuem.cfg, -% esthag.cfg, -% iecred.cfg, -% inoraj.cfg, -% jafcau.cfg, -% jacsat.cfg, -% jceaax.cfg, -% jcisd8.cfg, -% jctcce.cfg, -% jcchff.cfg, -% jmcmar.cfg, -% jnprdf.cfg, -% joceah.cfg, -% jpcafh.cfg, -% jpcbfk.cfg, -% jpccck.cfg, -% jprobs.cfg, -% langd5.cfg, -% mamobx.cfg, -% mpohbp.cfg, -% nalefd.cfg, -% orlef7.cfg, -% oprdfk.cfg, -% orgnd7.cfg, -% jawltxdoc.sty and -% README -% -% TDS-ready files: -% The compressed file achemso.tds.zip contains an unpacked version -% of all of the files included here, and pre-compiled -% documentation in PDF format. Simply decompress achemso.tds.zip -% in your local TeX directory, run your hash program (texhash, -% initexmf --update-fndb, etc.) and everything will be ready to -% go. The user documentation for the package is called -% achemso-manual.pdf; the file achemso.pdf includes the user -% manual and the fully-indexed source code. -% -% Unpacking: -% (a) If achemso.ins is present: -% tex achemso.ins -% (b) Without achemso.ins: -% tex achemso.dtx -% (c) If you use LaTeX to generate files: -% latex \let\install=y\input{achemso.dtx} -% -% Documentation: -% (a) Without write18 enabled: -% pdflatex achemso.dtx -% bibtex8 --wolfgang achemso -% makeindex -s gind.ist achemso.idx -% makeindex -s gglo.ist -o achemso.gls achemso.glo -% pdflatex achemso.dtx -% pdflatex achemso.dtx -% (b) With write18 enabled: -% pdflatex achemso.dtx -% pdflatex achemso.dtx -% pdflatex achemso.dtx -% -% Installation: -% Copy achemso.cls, the .sty files, the .bst files and the .cfg -% files to a location searched by TeX, and if required by your -% TeX installation, run the appropriate command to build a hash -% of files (texhash, initexmf --update-fndb, etc.) -% -% Note: -% The jawltxdoc.sty file is not needed for installation, -% only for building the documentation; it may be deleted -% after producing the documentation (if necessary). -% -%<*ignore> -% This is all taken verbatim from Heiko Oberdiek's packages -\begingroup - \def\x{LaTeX2e}% -\expandafter\endgroup -\ifcase 0\ifx\install y1\fi\expandafter - \ifx\csname processbatchFile\endcsname\relax\else1\fi - \ifx\fmtname\x\else 1\fi\relax -\else\csname fi\endcsname -%</ignore> +% !TEX program = pdflatex +% !TEX encoding = ISO-8859-1 +%<*internal> +\iffalse +%</internal> +%<*readme> +---------------------------------------------------------------- +achemso --- Support for submissions to American Chemical Society + journals +E-mail: joseph.wright@morningstar2.co.uk +Released under the LaTeX Project Public License v1.3c or later +See http://www.latex-project.org/lppl.txt +---------------------------------------------------------------- + +The achemso bundle provides a LaTeX class file and BibTeX style +file in accordance with the requirements of the American +Chemical Society (ACS). The files can be used for any documents, +but have been carefully designed and tested to be suitable for +submission to ACS journals. + +The bundle also includes the natmove package. This package is +loaded by achemso, and provides automatic moving of superscript +citations after punctuation. +%</readme> +%<*internal> +\fi +\def\nameofplainTeX{plain} +\ifx\fmtname\nameofplainTeX\else + \expandafter\begingroup +\fi +%</internal> %<*install> \input docstrip.tex \keepsilent \askforoverwritefalse \preamble - ---------------------------------------------------------------- - achemso --- Support for submissions to American Chemical - Society journals - Maintained by Joseph Wright - E-mail: joseph.wright@morningstar2.co.uk - Released under the LaTeX Project Public License v1.3c or later - See http://www.latex-project.org/lppl.txt - ---------------------------------------------------------------- +---------------------------------------------------------------- +achemso --- Support for submissions to American Chemical Society + journals +E-mail: joseph.wright@morningstar2.co.uk +Released under the LaTeX Project Public License v1.3c or later +See http://www.latex-project.org/lppl.txt +---------------------------------------------------------------- \endpreamble -\Msg{Generating achemso files:} -\generate{\file{jawltxdoc.sty}{\from{\jobname.dtx}{jawltxdoc}} -} +\postamble + +Originally developed by Mats Dahlgren +Copyright (C) 1996-1998 by Mats Dahlgren +Copyright (C) 2008-2009 by + Joseph Wright <joseph.wright@morningstar2.co.uk> + +Part of this bundle is derived from cite.sty, to which the +following license applies: + Copyright (C) 1989-2003 by Donald Arseneau + These macros may be freely transmitted, reproduced, or + modified provided that this notice is left intact. + +It may be distributed and/or modified under the conditions of +the LaTeX Project Public License (LPPL), either version 1.3c of +this license or (at your option) any later version. The latest +version of this license is in the file: + + http://www.latex-project.org/lppl.txt + +This work is "maintained" (as per LPPL maintenance status) by + Joseph Wright. + +This work consists of the file achemso.dtx + and the derived files achemso.pdf, + achemso.bib, + achemso.cls, + achemso.ins, + achemso.sty, + achemso-demo.tex, + natmove.sty and + a number of configuration files. + +\endpostamble \usedir{tex/latex/achemso} -\generate{\file{\jobname.sty}{\from{\jobname.dtx}{package}} - \file{\jobname.cls}{\from{\jobname.dtx}{class}} - \file{natmove.sty}{\from{natmove.dtx}{package}} -} -\usedir{source/latex/achemso} -\generate{\file{\jobname.ins}{\from{\jobname.dtx}{install}} +\generate{ + \file{\jobname.cls}{\from{\jobname.dtx}{class}} + \file{\jobname.sty}{\from{\jobname.dtx}{package}} + \file{natmove.sty}{\from{\jobname.dtx}{natmove}} } \usedir{tex/latex/achemso/config} \generate{\file{achre4.cfg}{\from{\jobname.dtx}{achre4}} @@ -172,8 +103,8 @@ \file{iecred.cfg}{\from{\jobname.dtx}{iecred}} \file{inoraj.cfg}{\from{\jobname.dtx}{inoraj}} } -\generate{\file{jafcau.cfg}{\from{\jobname.dtx}{jafcau}} - \file{jacsat.cfg}{\from{\jobname.dtx}{jacsat}} +\generate{\file{jacsat.cfg}{\from{\jobname.dtx}{jacsat}} + \file{jafcau.cfg}{\from{\jobname.dtx}{jafcau}} \file{jceaax.cfg}{\from{\jobname.dtx}{jceaax}} \file{jcisd8.cfg}{\from{\jobname.dtx}{jcisd8}} \file{jctcce.cfg}{\from{\jobname.dtx}{jctcce}} @@ -195,165 +126,207 @@ \file{oprdfk.cfg}{\from{\jobname.dtx}{oprdfk}} \file{orgnd7.cfg}{\from{\jobname.dtx}{orgnd7}} } -\nopreamble\nopostamble \usedir{bibtex/bst/achemso} -\generate{\file{achemso.bst}{\from{\jobname.dtx}{bst}} - \file{biochem.bst}{\from{\jobname.dtx}{bst,bio}} +\generate{ + \file{achemso.bst}{\from{\jobname.dtx}{bst}} + \file{biochem.bst}{\from{\jobname.dtx}{bst,bio}} } -\nopreamble\nopostamble -\usedir{doc/latex/achemso} -\generate{\file{achemso.bib}{\from{\jobname.dtx}{refs}} +%</install> +%<install>\endbatchfile +%<*internal> +\usedir{source/latex/achemso} +\generate{ + \file{\jobname.ins}{\from{\jobname.dtx}{install}} } \nopreamble\nopostamble \usedir{doc/latex/achemso} -\generate{\file{README.txt}{\from{\jobname.dtx}{readme}} - \file{achemso-demo.tex}{\from{\jobname.dtx}{demo}} +\generate{ + \file{README.txt}{\from{\jobname.dtx}{readme}} + \file{achemso-demo.tex}{\from{\jobname.dtx}{demo}} + \file{achemso.bib}{\from{\jobname.dtx}{bib}} } -\endbatchfile -%</install> -%<*readme> ----------------------------------------------------------------- -achemso --- Support for submissions to American Chemical - Society journals -Maintained by Joseph Wright -E-mail: joseph.wright@morningstar2.co.uk -Originally developed by Mats Dahlgren - (c) 1996-98 by Mats Dahlgren - (c) 2007-2009 Joseph Wright -Released under the LaTeX Project Public license v1.3c or later -See http://www.latex-project.org/lppl.txt - -Part of this bundle is derived from cite.sty, to which the -following license applies: - Copyright (C) 1989-2003 by Donald Arseneau - These macros may be freely transmitted, reproduced, or - modified provided that this notice is left intact. ----------------------------------------------------------------- - -The achemso bundle provides a LaTeX class file and BibTeX style -file in accordance with the requirements of the American -Chemical Society. The files can be used for any documents, but -have been carefully designed and tested to be suitable for -submission to ACS journals. - -The bundle also includes the natmove package. This package is -loaded by achemso, and provides automatic moving of superscript -citations after punctuation. -%</readme> -%<*ignore> +\ifx\fmtname\nameofplainTeX + \expandafter\endbatchfile +\else + \expandafter\endgroup \fi -% Will Robertson's trick -\immediate\write18{bibtex8 --wolfgang \jobname} -\immediate\write18{makeindex -s gind.ist -o \jobname.ind \jobname.idx} -\immediate\write18{makeindex -s gglo.ist -o \jobname.gls \jobname.glo} -%</ignore> +\immediate\write18{bibtex8 --wolfgang achemso} +\immediate\write18{makeindex -s gglo.ist -o achemso.gls achemso.glo} +\immediate\write18{makeindex -s gind.ist -o achemso.ind achemso.idx} +%</internal> +%<*package|class|natmove> +\NeedsTeXFormat{LaTeX2e} +%</package|class|natmove> %<*driver> -\PassOptionsToClass{a4paper}{article} -\documentclass[german,english,UKenglish]{ltxdoc} +\documentclass[a4paper]{ltxdoc} +\usepackage[T1]{fontenc} +\usepackage{achemso,array,booktabs,lmodern} +\usepackage[osf]{mathpazo} +\usepackage[scaled=0.95]{helvet} +\usepackage[final]{listings,microtype} +\usepackage[numbered]{hypdoc} \EnableCrossrefs \CodelineIndex \RecordChanges -%\OnlyDescription -\usepackage{jawltxdoc} \begin{document} \DocInput{\jobname.dtx} \end{document} %</driver> % \fi % -%\CheckSum{1709} -% -% \CharacterTable -% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z -% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z -% Digits \0\1\2\3\4\5\6\7\8\9 -% Exclamation \! Double quote \" Hash (number) \# -% Dollar \$ Percent \% Ampersand \& -% Acute accent \' Left paren \( Right paren \) -% Asterisk \* Plus \+ Comma \, -% Minus \- Point \. Solidus \/ -% Colon \: Semicolon \; Less than \< -% Equals \= Greater than \> Question mark \? -% Commercial at \@ Left bracket \[ Backslash \\ -% Right bracket \] Circumflex \^ Underscore \_ -% Grave accent \` Left brace \{ Vertical bar \| -% Right brace \} Tilde \~} +%\CheckSum{1964} % %\GetFileInfo{\jobname.sty} % -%\DoNotIndex{\@Esphack,\@afterindentfalse,\@afterindenttrue} -%\DoNotIndex{\@author@i,\@auxout,\@biblabel,\@bsphack,\@citex} -%\DoNotIndex{\@currenvir,\@empty,\@evenfoot,\@evenhead,\@firstoftwo} -%\DoNotIndex{\@floatboxreset,\@fnsymbol,\@for,\@gobble} -%\DoNotIndex{\@ifclassloaded,\@ifmtarg,\@ifpackageloaded,\@ifstar} -%\DoNotIndex{\@ifundefined,\@ignorefalse,\@m,\@maketitle,\@ne} -%\DoNotIndex{\@oddfoot,\@oddhead,\@onlypreamble,\@roman} -%\DoNotIndex{\@secondoftwo,\@secpenalty,\@shorttitle,\@ssect} -%\DoNotIndex{\@startsection,\@tempskipa,\@title,\active,\addpenalty} -%\DoNotIndex{\addvspace,\advance,\AtBeginDocument,\begin} -%\DoNotIndex{\begingroup,\bfseries,\bot,\catcode,\centering} -%\DoNotIndex{\citation,\cite,\citenum,\citenumfont,\ClassError} -%\DoNotIndex{\ClassInfo,\ClassWarning,\csname,\dagger,\ddagger} -%\DoNotIndex{\def,\define@boolkeys,\define@choicekey,\define@cmdkeys} -%\DoNotIndex{\do,\document,\doublespacing,\edef,\else,\end} -%\DoNotIndex{\endcsname,\endgroup,\endinput,\ensuremath,\everypar} -%\DoNotIndex{\expandafter,\fi,\figurename,\floatname} -%\DoNotIndex{\floatplacement,\floatstyle,\footnotetext} -%\DoNotIndex{\frenchspacing,\futurelet,\g@addto@macro,\gdef} -%\DoNotIndex{\global,\hbox,\hfil,\if@filesw,\if@ignore,\if@nobreak} -%\DoNotIndex{\if@noskipsec,\ifcase,\ifcsname,\ifdim,\iffalse,\ifnum} -%\DoNotIndex{\ifx,\ignorespaces,\immediate,\InputIfFileExists} -%\DoNotIndex{\itshape,\jobname,\kv@set@family@handler,\kvsetkeys} -%\DoNotIndex{\labelformat,\LARGE,\large,\lastskip,\leavevmode} -%\DoNotIndex{\let,\LoadClass,\lowercase,\m@ne,\maketitle} -%\DoNotIndex{\mathchardef,\mathsection,\MessageBreak,\NeedsTeXFormat} -%\DoNotIndex{\newcommand,\newcount,\newfloat,\newif,\newpage} -%\DoNotIndex{\newwrite,\nocite,\null,\openout,\or,\PackageError} -%\DoNotIndex{\PackageInfo,\PackageWarning,\pagestyle,\par} -%\DoNotIndex{\ProcessOptionsX,\protected@edef,\ProvidesClass} -%\DoNotIndex{\ProvidesFile,\ProvidesPackage,\relax} -%\DoNotIndex{\renewcommand,\RequirePackage,\reset@font} -%\DoNotIndex{\restylefloat,\schemename,\section,\setbox,\setkeys} -%\DoNotIndex{\sf,\sfcode,\sffamily,\skip@,\space,\spacefactor} -%\DoNotIndex{\string,\subsection,\subsubsection,\tablename,\textit} -%\DoNotIndex{\textsuperscript,\textwidth,\the,\thepage,\truncate} -%\DoNotIndex{\tw@,\unskip,\url,\UrlFont,\value,\vskip,\wd,\write} -%\DoNotIndex{\xdef,\z@} +%\makeatletter % -%\DoNotIndex{\@firstofone,\aftergroup} +%^^A \DescribeOption is in l3doc but not ltxdoc +%\newcommand*{\DescribeOption}{^^A +% \leavevmode +% \@bsphack +% \begingroup +% \MakePrivateLetters +% \Describe@Option +%} +%\newcommand*{\Describe@Option}[1]{^^A +% \endgroup +% \marginpar{^^A +% \raggedleft +% \PrintDescribeEnv{#1}^^A +% }% +% \SpecialOptionIndex{#1}^^A +% \@esphack +% \ignorespaces +%} +%\newcommand*{\SpecialOptionIndex}[1]{^^A +% \@bsphack +% \index{^^A +% #1\actualchar{\protect\ttfamily#1} (option)\encapchar usage^^A +% }^^A +% \index{^^A +% options:\levelchar#1\actualchar{\protect\ttfamily#1} +% \encapchar usage^^A +% }^^A +% \@esphack +%} % -%\DoNotIndex{\nmv@citetrue,\nmv@citex,\nmv@ifmtarg} +%^^A For creating examples with nice highlighting of code, and so +%^^A on; based on the system used in the listings source (lstsample). +%\lst@RequireAspects{writefile} +%\newsavebox{\LaTeXdemo@box} +%\lstnewenvironment{LaTeXdemo}[1][code and example]{^^A +% \global\let\lst@intname\@empty +% \expandafter\let\expandafter\LaTeXdemo@end +% \csname LaTeXdemo@#1@end\endcsname +% \@nameuse{LaTeXdemo@#1}^^A +%}{^^A +% \LaTeXdemo@end +%} +%\newcommand*\LaTeXdemo@new[3]{^^A +% \expandafter\newcommand\expandafter*\expandafter +% {\csname LaTeXdemo@#1\endcsname}{#2}^^A +% \expandafter\newcommand\expandafter*\expandafter +% {\csname LaTeXdemo@#1@end\endcsname}{#3}^^A +%} +%\newcommand*\LaTeXdemo@common{^^A +% \setkeys{lst}{ +% basicstyle = \small\ttfamily, +% basewidth = 0.51em, +% gobble = 3, +% keywordstyle = \color{blue}, +% language = [LaTeX]{TeX}, +% moretexcs = { +% affiliation, +% alsoaffiliation, +% altaffiliation, +% natmovechars +% } +% }^^A +%} +%\newcommand*\LaTeXdemo@input{^^A +% \MakePercentComment +% \catcode`\^^M=10\relax +% \small +% \begingroup +% \setkeys{lst}{ +% SelectCharTable=\lst@ReplaceInput{\^\^I}{\lst@ProcessTabulator} +% }^^A +% \leavevmode +% \input{\jobname.tmp}^^A +% \endgroup +% \MakePercentIgnore +%} +%\LaTeXdemo@new{code and example}{^^A +% \setbox\LaTeXdemo@box=\hbox\bgroup +% \lst@BeginAlsoWriteFile{\jobname.tmp}^^A +% \LaTeXdemo@common +%}{^^A +% \lst@EndWriteFile +% \egroup +% \begin{center} +% \ifdim\wd\LaTeXdemo@box>0.48\linewidth\relax +% \hbox to\linewidth{\box\LaTeXdemo@box\hss}^^A +% \begin{minipage}{\linewidth} +% \LaTeXdemo@input +% \end{minipage} +% \else +% \begin{minipage}{0.48\linewidth} +% \LaTeXdemo@input +% \end{minipage} +% \hfill +% \begin{minipage}{0.48\linewidth} +% \hbox to\linewidth{\box\LaTeXdemo@box\hss}^^A +% \end{minipage} +% \fi +% \end{center} +%} +%\LaTeXdemo@new{code only}{^^A +% \LaTeXdemo@common +%}{^^A +%} % -%\changes{v1.0}{1998/06/01}{Initial release of package by Mats -% Dahlgren} -%\changes{v2.0}{2007/01/17}{Re-write of package by Joseph Wright} -%\changes{v3.0}{2008/07/20}{Second re-write, converting to a class -% and giving much tighter integration with \textsc{acs} submission -% system} +%\providecommand*{\eTeX}{\ensuremath{\varepsilon}-\TeX} +%\providecommand*{\file}{\texttt} +%\providecommand*{\opt}{\texttt} +%\providecommand*{\pkg}{\textsf} +% +%\newcommand*{\ACS}{\textsc{acs}} % -%\setkeys{lst}{language=[LaTeX]{TeX},moretexcs={bibnote,email,% -% affiliation,altaffiliation,alsoaffiliation}} +%\makeatother % -%\title{\currpkg\ --- Support for submissions to American -% Chemical Society journals^^A -% \thanks{This file describes version \fileversion, last revised -% \filedate.}} -%\author{Joseph Wright^^A -% \thanks{E-mail: joseph.wright@morningstar2.co.uk}} +%\title{^^A +% \textsf{achemso} --- Support for submissions to American Chemical +% Society journals\thanks{^^A +% This file describes version \fileversion, last revised +% \filedate.^^A +% }^^A +%} +%\author{^^A +% Joseph Wright\thanks{E-mail: joseph.wright@morningstar2.co.uk}^^A +%} %\date{Released \filedate} % %\maketitle % -%\newcommand*{\ACS}{\textsc{acs}} -%\begin{abstract} -% The \currpkg bundle provides a \LaTeX\ class file and \BibTeX\ -% style file in accordance with the requirements of the American -% Chemical Society. The files can be used for any documents, but -% have been carefully designed and tested to be suitable for -% submission to \ACS\ journals. +%\changes{v1.0}{1998/06/01}{Initial release of package by Mats Dahlgren} +%\changes{v2.0}{2007/01/17}{Re-write of package by Joseph Wright} +%\changes{v3.0}{2008/07/20}{ +% Second re-write, converting to a class and giving much tighter +% integration with \textsc{acs} submission system +%} +%\changes{v3.1}{2009/04/21}{ +% Re-ordered code to reduce or remove dependency on other packages +%} % -% The bundle also includes the \pkg{natmove} package. This package -% is loaded by \currpkg, and provides automatic moving of superscript +%\begin{abstract} +% The \pkg{achemso} bundle provides a \LaTeX\ class file and \BibTeX\ +% style file in accordance with the requirements of the American +% Chemical Society (\ACS). The files can be used for any documents, but +% have been carefully designed and tested to be suitable for submission +% to \ACS\ journals. +% +% The bundle also includes the \pkg{natmove} package. This package is +% loaded by \pkg{achemso}, and provides automatic moving of superscript % citations after punctuation. %\end{abstract} % @@ -362,29 +335,54 @@ citations after punctuation. %\end{multicols} % %\section{Introduction} -%\newcommand*{\REVTeX}{REV\TeX4} % Support for \BibTeX\ bibliography following the requirements of the % American Chemical Society (\ACS), along with a package to make -% these easy to have been available since version one of \currpkg. +% these easy to have been available since version one of \pkg{achemso}. % The re-write from version 1 to version 2 made a number of % improvements to the package, and also added a number of new % features. However, neither version one nor version two of the % package was targeted directly at use for submissions to \ACS\ -% journals. This new release of \currpkg addresses this issue. +% journals. This new release of \pkg{achemso} addresses this issue. % % The bundle consists of four parts. The first is a \LaTeXe\ class, % intended for use in submissions. It is based on the standard % \pkg{article} class, but makes various changes to facilitate ease -% of use. The second part is the \LaTeX\ package, which is loaded by -% the class. The package contains the parts of the bundle which -% might be appropriate for use with other document -% classes.\footnote{For example, when writing a thesis.} Thirdly, -% two \BibTeX\ style files are included. These are used by both the -% class and the package, but can be used directly if desired. +% of use. The second part is the \LaTeX\ package. The package contains +% the parts of the bundle which are appropriate for use with other +% document classes.\footnote{For example, when writing a thesis.} +% Thirdly, two \BibTeX\ style files are included. These are used by +% both the class and the package, but can be used directly if desired. % Finally, an example document is included; this is intended to act a % potential template for submission, and illustrates the use of the % class file. % +%\section{Installation} +% +% The entire bundle is supplied with the TDS-ready ZIP file, +% \file{achemso.tds.zip}. Simply unzip this into your local texmf +% tree and run your hash program (\texttt{texhash} for \TeX{}Live or +% \texttt{initextmf -u} for MiK\TeX). +% +% To extract the bundle of files from \file{achemso.dtx}, run +% (pdf)\TeX\ on \file{achemso.dtx}. This will produce all of the package +% files, and also \file{README.txt}. To extract the +% files and build the documentation, run (pdf)\LaTeX\ on +% \texttt{achemso.dtx}. The files can then be installed as above. +% +%\section{Requirements} +% +% The \pkg{achemso} class requires the following packages: +%\begin{itemize} +% \item \pkg{caption} +% \item \pkg{float} +% \item \pkg{natbib} +% \item \pkg{setspace} +% \item \pkg{xkeyval} +%\end{itemize} +% These are normally present in the current major \TeX\ distributions, +% but are also available from \href{http://www.ctan.org}{The +% Comprehensive TeX Archive Network}. +% %\section{The class file} % The class file has been designed for use in submitting journals to % the \ACS. It uses all of the modifications described here (those in @@ -400,6 +398,7 @@ citations after punctuation. % effect. % %\subsection{Class options} +% %\DescribeOption{journal} % The class supports a limited number of options, which are % specifically-targeted at submission. The class uses the @@ -408,55 +407,55 @@ citations after punctuation. % target journal for the publication. The package is designed such % that the choice of journal will set up the correct bibliography % style and so on. The journals currently recognised by the package -% are summarised in \ref{tbl:journal}. If an unknown journal +% are summarised in \ref{tab:journal}. If an unknown journal % is specified, the package will fall-back on the % \opt{journal=jacsat} option. %\begin{table} % \centering % \begin{tabular}{>{\itshape}l>{\ttfamily}l} % \toprule -% Journal & Setting \\ +% Journal & Setting \\ % \midrule -% Acc.\ Chem.\ Res. & achre4 \\ -% ACS Chem.\ Biol. & acbcct \\ -% ACS Nano & ancac3 \\ -% Anal.\ Chem. & ancham \\ -% Biochemistry & bichaw \\ -% Bioconjugate Chem. & bcches \\ -% Biomacromolecules & bomaf6 \\ -% Biotechnol.\ Prog. & bipret \\ -% Chem.\ Res.\ Toxicol. & crtoec \\ -% Chem.\ Rev. & chreay \\ -% Chem.\ Mater. & cmatex \\ -% Cryst.\ Growth Des. & cgdefu \\ -% Energy Fuels & enfuem \\ -% Environ.\ Sci.\ Technol. & esthag \\ -% Ind.\ Eng.\ Chem.\ Res. & iecred \\ -% Inorg.\ Chem. & inoraj \\ -% J.~Agric.\ Food Chem. & jafcau \\ -% J.~Chem.\ Eng.\ Data & jceaax \\ -% J.~Chem.\ Inf.\ Model. & jcisd8 \\ -% J.~Chem.\ Theory Comput. & jctcce \\ -% J.~Comb.\ Chem. & jcchff \\ -% J.~Med.\ Chem. & jmcmar \\ -% J.~Nat.\ Prod. & jnprdf \\ -% J.~Org.\ Chem. & joceah \\ -% J.~Phys.\ Chem.~A & jpcafh \\ -% J.~Phys.\ Chem.~B & jpcbfk \\ -% J.~Phys.\ Chem.~C & jpccck \\ -% J.~Proteome Res. & jprobs \\ -% J.~Am.\ Chem.\ Soc. & jacsat \\ -% Langmuir & langd5 \\ -% Macromolecules & mamobx \\ -% Mol.\ Pharm. & mpohbp \\ -% Nano Lett. & nalefd \\ -% Org.\ Lett. & orlef7 \\ -% Org.\ Proc.\ Res.\ Dev. & oprdfk \\ -% Organometallics & orgnd7 \\ +% Acc.\ Chem.\ Res. & achre4 \\ +% ACS Chem.\ Biol. & acbcct \\ +% ACS Nano & ancac3 \\ +% Anal.\ Chem. & ancham \\ +% Biochemistry & bichaw \\ +% Bioconjugate Chem. & bcches \\ +% Biomacromolecules & bomaf6 \\ +% Biotechnol.\ Prog. & bipret \\ +% Chem.\ Res.\ Toxicol. & crtoec \\ +% Chem.\ Rev. & chreay \\ +% Chem.\ Mater. & cmatex \\ +% Cryst.\ Growth Des. & cgdefu \\ +% Energy Fuels & enfuem \\ +% Environ.\ Sci.\ Technol. & esthag \\ +% Ind.\ Eng.\ Chem.\ Res. & iecred \\ +% Inorg.\ Chem. & inoraj \\ +% J.~Agric.\ Food Chem. & jafcau \\ +% J.~Chem.\ Eng.\ Data & jceaax \\ +% J.~Chem.\ Inf.\ Model. & jcisd8 \\ +% J.~Chem.\ Theory Comput. & jctcce \\ +% J.~Comb.\ Chem. & jcchff \\ +% J.~Med.\ Chem. & jmcmar \\ +% J.~Nat.\ Prod. & jnprdf \\ +% J.~Org.\ Chem. & joceah \\ +% J.~Phys.\ Chem.~A & jpcafh \\ +% J.~Phys.\ Chem.~B & jpcbfk \\ +% J.~Phys.\ Chem.~C & jpccck \\ +% J.~Proteome Res. & jprobs \\ +% J.~Am.\ Chem.\ Soc. & jacsat \\ +% Langmuir & langd5 \\ +% Macromolecules & mamobx \\ +% Mol.\ Pharm. & mpohbp \\ +% Nano Lett. & nalefd \\ +% Org.\ Lett. & orlef7 \\ +% Org.\ Proc.\ Res.\ Dev. & oprdfk \\ +% Organometallics & orgnd7 \\ % \bottomrule % \end{tabular} % \caption{Values for \opt{journal} option} -% \label{tbl:journal} +% \label{tab:journal} %\end{table} % %\DescribeOption{manuscript} @@ -472,20 +471,14 @@ citations after punctuation. % class these are silently ignored. % %\subsection{Manuscript meta-data} -%\DescribeMacro{\title} -% When using the \currpkg class, the \cs{title} macro takes an -% optional argument. This is intended for a short version of the -% title, for use in running headers. The title in the running -% headers is designed to ensure that print-outs of the manuscript are -% easily identified. % %\DescribeMacro{\author} %\DescribeMacro{\affiliation} %\DescribeMacro{\alsoaffiliation} -%\changes{2008/11/08}{v3.1}{Added \cs{alsoaffiliation} macro} +%\changes{v3.1}{2008/11/08}{Added \cs{alsoaffiliation} macro} %\DescribeMacro{\altaffiliation} %\DescribeMacro{\email} -% Inspired by \REVTeX, the \currpkg class alters the method for +% Inspired by REV\TeX, the \pkg{achemso} class alters the method for % adding author information to the manuscript. Each author should be % given as a separate \cs{author} command. These should be followed % by an \cs{affiliation}, which applies to the preceding authors. The @@ -501,7 +494,7 @@ citations after punctuation. % \cs{affiliation} applies to multiple authors: both % \cs{alsoaffiliation} and \cs{altaffiliation} are set on a per % author basis. -%\begin{LaTeXexample}[noexample] +%\begin{LaTeXdemo}[code only] % \author{Author Person} % \author{Second Bloke} % \email{second.bloke@some.place} @@ -514,46 +507,62 @@ citations after punctuation. % \affiliation[SponsoCo] % {Research Department, SponsorCo, BigCity, USA} % \alsoaffiliation{University of Somewhere, Sometown, USA} -%\end{LaTeXexample} +%\end{LaTeXdemo} % %\DescribeMacro{\and} %\DescribeMacro{\thanks} % The method used for setting the meta-data means that the normal -% \cs{and} and \cs{thanks} macros are not appropriate in the \currpkg -% class. Both produce a warning if used. +% \cs{and} and \cs{thanks} macros are not appropriate in the \ +% pkg{achemso} class. Both produce a warning if used. % % The meta-data items should be given in the preamble to the \LaTeX\ % file, and no \cs{maketitle} macro is required in the document body. % This is all handled by the class file directly. At least one % author, affiliation and e-mail address must be specified. % -%\subsection{Bibliography notes} -%\DescribeMacro{\bibnote} -% By loading the \pkg{notes2bib} package, the class provides the -% \cs{bibnote} macro. This is intended for addition of notes to the -% bibliography (references). The macro accepts a single argument, -% which is transferred to the bibliography by \BibTeX. -%\begin{LaTeXexample} -% Some text \bibnote{This note text will be in -% the bibliography}. -%\end{LaTeXexample} -% %\subsection{Floats} %\DescribeEnv{scheme} %\DescribeEnv{chart} %\DescribeEnv{graph} % The class defines three new floating environments: \texttt{scheme}, -% \texttt{chart} and \texttt{graph}.\footnote{This is done in the -% class as life is complex for packages due to differing mechanisms -% in \pkg{memoir} and \textsc{koma}-script.} These can be used as -% expected to include graphical content. The placement of these new -% floats and the standard \texttt{table} and \texttt{figure} floats -% is altered to be ``here'' if possible. The contents of all floats -% is automatically horizontally centred on the page. +% \texttt{chart} and \texttt{graph}. These can be used as expected to +% include graphical content. The placement of these new floats and the +% standard \texttt{table} and \texttt{figure} floats is altered to be +% ``here'' if possible. The contents of all floats is automatically +% horizontally centred on the page. % % Cross-referencing to floats automatically includes the name of the -% floating environment. For example, \texttt{\cs{ref}\{table:one\}} +% floating environment. For example, |\ref{table:one}| % will yield ``Table~1'' without the user adding the ``Table'' part. +% +%\subsection{Section headers} +% +%\DescribeMacro{\SectionNumbersOff} +%\DescribeMacro{\SectionNumbersOn} +%\changes{v3.2}{2009/04/20}{ +% New functions \cs{SectionsOff}, \cs{SectionsOn}, +% \cs{SectionNumbersOff} and \cs{SectionNumbersOn} +%} +% Some journals have no section numbering by default. This can be +% set up in the appropriate configuration file, but it may be that +% individual users need to change the decision. The macros +% \cs{SectionNumbersOff} and \cs{SectionNumbersOn} are therefore +% available: these should be given in the preamble. +% +%\DescribeMacro{\SectionsOff} +%\DescribeMacro{\SectionsOn} +% More radically, the entire availability of sections can be turned on +% and of. This is functionality is available to the user \emph{via} the +% \cs{SectionsOn} and \cs{SectionsOff} macros, which again are +% preamble-only. +% +%\DescribeMacro{\AbstractOff} +%\DescribeMacro{\AbstractOn} +%\changes{v3.2}{2009/04/20}{ +% New functions \cs{AbstractOff} and \cs{AbstractOn} +%} +% Similar functions are available for the abstract: \cs{AbstractOff} and +% \cs{AbstractOn}. % %\subsection{Special sections} % @@ -562,46 +571,46 @@ citations after punctuation. % The sections for acknowledgements and supporting information % have dedicated environments available. These ensure that % the section headings are generated, and that the text is -% sized corrected when using creating a JACS Communication. -%\begin{LaTeXexample}[noexample] +% sized corrected when using creating a Communication. +%\begin{LaTeXdemo}[code only] % \begin{acknowldegment} % The authors thank A.N.~Other. -% \end{acknowldegment} +% \end{acknowldegment} % -% \begin{suppinfo} -% Full characterization data for all new compounds. -% This material is available for download from -% \url{http://pubs.acs.org} -% \end{suppinfo} -%\end{LaTeXexample} -% -%\section{The package file} -% The package file is loaded by the class, but can also be loaded -% independently. The class contains only items focussed on -% submission; more generally-useful items are stored in the package. +% \begin{suppinfo} +% Full characterization data for all new compounds. +% This material is available for download from +% \url{http://pubs.acs.org} +% \end{suppinfo} +%\end{LaTeXdemo} % -%\subsection{Altering the behaviour of \pkg{natbib}} -% \currpkg comes with the \pkg{natmove} package, which adds -% \pkg{cite}-like functionality to \pkg{natbib}.\footnote{The code is -% a copy from \pkg{cite} with minor modifications.} Thus citations -% may be made using all of the \pkg{natbib} commands -% (\cs{citeauthor}, \cs{citeyear}, \etc). For superscript citations, -% the number will be moved after punctuation as needed. The user -% should therefore write citations suitable for ``in line'' use and -% leave the positioning to the package. -%\begin{LaTeXexample} -% Some text \cite{Coghill2006} some more text.\\ -% Some text ending a sentence \cite{Coghill2006}. -%\end{LaTeXexample} +%\DescribeEnv{tocentry} +%\changes{v3.2}{2009/04/21}{New \texttt{tocentry} section} +% For generating an entry for the graphical table of content, required +% by some journals, the environment \texttt{tocentry} is available. This +% prints its content in an appropriately sized box on a separate page. +% In contrast to the rest of the manuscript, this section is intended to +% be ``print ready'' in appearance. + +%\begin{LaTeXdemo}[code only] +% \begin{tocentry} +% \includegraphics{toc-entry-graphic} +% Some text to explain the graphic. +% \end{tocentry} +%\end{LaTeXdemo} % +%\section{The package file} +% The \pkg{achemso} package is independent of the classs file, and +% contains parts of the bundle useful outside of submission to the +% \ACS. +% %\subsection{Package options} -% The \opt{journal} and \opt{manuscript} options have no effect when -% using the package without the class. Instead, the user can control -% various aspects of the behaviour of the package -% directly.\footnote{Using the package alone probably means a report -% or thesis is being written, and so prescriptive application of -% journal style is not appropriate.} The options all relate to -% aspects of reference handling. +% +% As with the class options, the package uses the key--value method +% for option set up. These are used to control the output of citations +% and bibliographic data. The same options are used when creating +% journal configurations for the class: this is a task most users will +% not need to undertake! % %\DescribeOption{super} % The \opt{super} option affects the handling of superscript @@ -615,7 +624,7 @@ citations after punctuation. % of the \BibTeX\ style files. \opt{maxauthors} is the number of % authors allowed before truncation to ``et~al.'' occurs. The % default is 15, but can be increased (for example for supplementary -% information). Using the value 0 means that all authors will be +% information). Using the value $0$ means that all authors will be % added to the list. The \opt{usetitle} option is a Boolean, and % sets whether the title of a paper referenced appears in the % bibliography. The default is \opt{usetitle=false}. @@ -628,8 +637,8 @@ citations after punctuation. % (surround the number in brackets) and \opt{period} or % \opt{fullstop} (follow the number by a full stop/period). % -%\DescribeOption{biochemistry} %\DescribeOption{biochem} +%\DescribeOption{biochemistry} % Most \ACS\ journals use the same bibliography style, with the only % variation being the inclusion of article titles. However, a small % number of journals use a rather different style; the journal @@ -640,15 +649,55 @@ citations after punctuation. % default.\footnote{More accurately, the default built into the % \BibTeX\ style file is to use article titles with the % \emph{Biochemistry} style.} +% +%\subsection{Bibliography notes} % +%\DescribeMacro{\bibnote} +%\DescribeMacro{\bibnotemark} +%\DescribeMacro{\bibnotetext} +% \pkg{achemso} provides the \cs{bibnote} macro. This is intended for +% addition of notes to the bibliography (references). The macro +% accepts a single argument, which is transferred to the bibliography by +% \BibTeX. In analogy to \cs{footnote}, the macros \cs{bibnotemark} and +% \cs{bibnotetext} are available for dividing up the marker for a +% note from the text. +%\begin{LaTeXdemo} +% Some text \bibnote{This note text will be in the bibliography}. +%\end{LaTeXdemo} +% +% The functionality for bibnotes in \pkg{achemso} is based on that +% in the \pkg{notes2bib} package. The \pkg{notes2bib} package can be +% loaded with the \pkg{achemso} package, and no clash will occur. With +% the class file, \pkg{notes2bib} will be ignored if requested, to +% prevent issues on submission to the \ACS. +% %\section{The \texorpdfstring{\BibTeX}{BibTeX} style files} -% \currpkg is supplied with two style files, \file{achemso.bst} and -% \file{biochem.bst}. The direct use of these without the \currpkg +% +% \pkg{achemso} is supplied with two style files, \file{achemso.bst} and +% \file{biochem.bst}. The direct use of these without the \pkg{achemso} % package file is not recommended, but is possible. The style files % can be loaded in the usual way, with a \cs{bibliographystyle} -% command. The \pkg{natbib} and \pkg{micteplus} packages must be -% loaded by the \LaTeX\ file concerned, if the \pkg{achemso} package -% is not in use. +% command. The \pkg{natbib} package must be loaded by the \LaTeX\ file +% concerned, if the \pkg{achemso} package is not in use. +% +% The style files are designed to use the \pkg{mciteplus} package if it +% is available, but to work even if is not. When \pkg{mciteplus} is +% present, it is possible to automatically produce references of the +% form +%\begin{quotation} +% \noindent +% (5) (a) Arduengo,~A.~J.,~III; Dias,~H. V.~R.; Harlow,~R.~L.; +% Kline,~M. \emph{{J}.~{A}m.\ {C}hem.\ {S}oc.} \textbf{1992}, +% \emph{114}, 5530--5534; (b) Appelhans,~L.~N.; Zuccaccia,~D.; +% Kovacevic,~A.; Chianese,~A.~R.; Miecznikowski,~J.~R.; Macchioni,~A.; +% Clot,~E.; Eisenstein,~O.; Crabtree,~R.~H. \emph{{J}.~{A}m.\ {C}hem. +% {S}oc.} \textbf{2005}, \emph{127}, 16299--16311; (c) +% Arduengo,~A.~J.,~III; Gamper,~S.~F.; Calabrese,~J.~C.; Davidson,~F. +% \emph{J.~Am.\ Chem.\ Soc.} \textbf{1994}, \emph{116}, 4391--4394. +%\end{quotation} +% as demonstrated in the example document. When \pkg{mciteplus} is +% not present, this functionality is not available but the style files +% will work normally. % % The \BibTeX\ style files implement the bibliographic style % specified by the \ACS\ in \emph{The ACS Style Guide} @@ -656,40 +705,541 @@ citations after punctuation. % output using the \file{achemso.bst} file, but are with the % \file{biochem.bst} file. % -%\StopEventually{% +%\section{The \pkg{natmove} package} +% +% The \pkg{natmove} package does only one job. It brings the ability to +% move punctuation after citations, using code borrowed from the +% \pkg{cite} package. Both the \pkg{achemso} class and package load +% \pkg{natmove} automatically. +%\begin{LaTeXdemo} +% Some text \cite{Coghill2006} some more text.\\ +% Some text ending a sentence \cite{Coghill2006}. +%\end{LaTeXdemo} +% This is deactivated for other citation types. +%\begin{LaTeXdemo} +% Some text \citeyear{Coghill2006}.\\ +% Some text \citeauthor{Coghill2006}.\\ +% Some text \citenum{Coghill2006}. +%\end{LaTeXdemo} +% The package does nothing if the \opt{super} option has not been +% given to \pkg{natbib}. This means that the source can be written +% without needing to decide where citations will to appear, with the +% \opt{super} option for \pkg{natbib} controlling the result. +% +%\DescribeMacro{\natmovechars} +% One user macro is provided: \cs{natmovechars}. This contains +% the characters which are moved before superscript punctuation. +% The default contents is |,;:.| and can be set using +% \cs{renewcommand*}: +%\begin{LaTeXdemo} +% \renewcommand*{\natmovechars}{.} +% Some text \cite{Coghill2006}, +% more text \cite{Coghill2006}. +%\end{LaTeXdemo} +% +%\StopEventually{^^A % \PrintChanges % \PrintIndex -% \bibliography{achemso}} +% \bibliography{achemso} +%} % -%\iffalse -%<*class> -%\fi -%\section{The class file} -%\subsection{Setup code} -%\changes{v3.1}{2008/08/27}{Package loading re-ordered} -% The first task of the class is the usual identification. +%\section{Implementation} +% +% A lot of the work done by the package is also needed by the class. +% Loading the package and the class makes load-order awkward. Instead, +% the two parts are done in one place. Sandwiching the common code are +% two slices of dedicated material for the class and the package. Some +% of this is needed ``early'', before the common material, whilst the +% rest is ``late''. +% +%\subsection{Early class-only code} +% +% So that there is no confusion, the base class is loaded early. % \begin{macrocode} -\NeedsTeXFormat{LaTeX2e} -\LoadClass[12pt]{article} +%<*class> \ProvidesClass{achemso} - [2009/02/03 v3.1a Submissions to ACS journals] -\RequirePackage[etex=false]{notes2bib}[2008/06/21] -\RequirePackage[margin=2.54cm]{geometry} + [2009/04/21 v3.2 Submission to ACS journals] +\LoadClass[12pt,letter]{article} +% \end{macrocode} +% +%\begin{macro}{\acs@warning} +% The code for a warning is created so that it works for the package too. +% \begin{macrocode} +\newcommand*{\acs@warning}{\ClassWarning{achemso}} +%</class> +% \end{macrocode} +%\end{macro} +% +%\subsection{Early package-only code} +% +% The package and the class should not both be loaded, as the two use +% the same internal macro names. On the other hand, if the class is +% not in use a reminder is printed to use it if possible. +% \begin{macrocode} +%<*package> +\ProvidesPackage{achemso} + [2009/04/21 v3.2 Support for ACS journals] +\@ifclassloaded{achemso}{% + \PackageInfo{achemso}{% + You have already loaded the `achemso' class:\MessageBreak + loading the package will abort% + }% + \endinput +}{% + \PackageInfo{achemso}{% + When writing a submission to an ACS journal, please\MessageBreak + use the achemso document class% + }% +} +% \end{macrocode} +% +%\begin{macro}{\acs@warning} +% The code for a warning is created so that it works for the class too. +% \begin{macrocode} +\newcommand*{\acs@warning}{\PackageWarning{achemso}} +%</package> +% \end{macrocode} +%\end{macro} +% +%\subsection{Common code} +% +%\begin{macro}{\acs@ifundefined} +% A non-expandable test for defined macros: does not add to the hash +% table. +% \begin{macrocode} +%<*package|class> +\newcommand*{\acs@ifundefined}[1]{% + \begingroup\expandafter\expandafter\expandafter\endgroup + \expandafter\ifx\csname #1\endcsname\relax + \expandafter\@firstoftwo + \else + \expandafter\@secondoftwo + \fi +} +% \end{macrocode} +%\end{macro} +% +% The first stage needed is to read the package options given. Although +% \pkg{xkeyval} was perhaps not the best choice, changing this now would +% be rather risky. +% \begin{macrocode} +\RequirePackage{xkeyval} +% \end{macrocode} +%\begin{macro}{\ifacs@biochem} +%\begin{macro}{\ifacs@super} +%\begin{macro}{\ifacs@usetitle} +% These are all very trivial definitions: to avoid issues with older +% versions of \pkg{xkeyval} each definition is done separately. +% \begin{macrocode} +\define@boolkey{acs}[acs@]{biochem}[true]{} +\define@boolkey{acs}[acs@]{super}[true]{} +\define@boolkey{acs}[acs@]{usetitle}[true]{} +% \end{macrocode} +%\end{macro} +%\end{macro} +%\end{macro} +%\begin{macro}{\acs@journal} +%\begin{macro}{\acs@manuscript} +%\begin{macro}{\acs@maxauthors} +% Trivial again. +% \begin{macrocode} +\newcommand*{\acs@journal}{jacsat} +\newcommand*{\acs@manuscript}{article} +\newcommand*{\acs@maxauthors}{15} +\define@cmdkey{acs}[acs@]{journal}{} +\define@cmdkey{acs}[acs@]{manuscript}{} +\define@cmdkey{acs}[acs@]{maxauthors}{} +% \end{macrocode} +%\end{macro} +%\end{macro} +%\end{macro} +% The \opt{biochemistry} option is an alias for \opt{biochem}. The +% \opt{biblabel} option is a choice, which is implemented using a +% csname search. The group here prevents hash table pollution, whilst +% the \pkg{xkeyval} method is avoided as it is more complex than it is +% worth! +% \begin{macrocode} +\define@key{acs}{biochemistry}{% + \setkeys{acs}{biochem = #1}% +} +\define@key{acs}{biblabel}{% + \acs@ifundefined{acs@biblabel@#1}{% + \acs@warning{% + Unknown value `#1' for\MessageBreak biblabel option% + }% + }{% + \@nameuse{acs@biblabel@#1}% + }% +} +% \end{macrocode} +%\begin{macro}{\acs@biblabel@brackets} +%\begin{macro}{\acs@biblabel@fullstop} +%\begin{macro}{\acs@biblabel@period} +%\begin{macro}{\acs@biblabel@plain} +% The macros to implement the idea above for biblabels. +% \begin{macrocode} +\newcommand*{\acs@biblabel@brackets}{\def\@biblabel##1{(##1)}} +\newcommand*{\acs@biblabel@fullstop}{\def\@biblabel##1{##1.}} +\newcommand*{\acs@biblabel@period}{\def\@biblabel##1{##1.}} +\newcommand*{\acs@biblabel@plain}{\def\@biblabel##1{##1}} +% \end{macrocode} +%\end{macro} +%\end{macro} +%\end{macro} +%\end{macro} +% Set up some defaults. +% \begin{macrocode} +\setkeys{acs}{ + super = true +} +% \end{macrocode} +% Loading some other packages depends on the options chosen, so they +% are processed now. +% \begin{macrocode} +\ProcessOptionsX*<acs> +% \end{macrocode} +% +%\begin{macro}{\acs@niib@create} +%\begin{macro}{bibnote} +%\begin{macro}{\thebibnote} +%\begin{macro}{\bibnote} +%\begin{macro}{\bibnotemark} +%\begin{macro}{\bibnotetext} +%\begin{macro}{\printbibnotes} +% To avoid needing to load the \pkg{notes2bib} package, especially as +% the plan is to move that package to \LaTeX3 internal syntax, +% \pkg{achemso} provides a minimal version here. The first step is to +% create macros which will need a guard against \pkg{notes2bib} already +% having been loaded. To allow the package and class to behave +% differently these are actually applied later. +% \begin{macrocode} +\newcommand*{\acs@niib@create}{% + \@namedef{ver@notes2bib.sty}{% + 2009/04/20 v1.6a Integrating notes into the bibliography (achemso + version) + }% + \newcounter{bibnote} + \renewcommand*{\thebibnote}{% + Note-\the\value{bibnote}% + }% + \DeclareRobustCommand*{\bibnote}[1][\thebibnote]{% + \stepcounter{bibnote}% + \def\acs@niib@after@text{\cite{##1}}% + \acs@niib@text{##1}% + }% + \DeclareRobustCommand*{\bibnotemark}[1][\thebibnote]{% + \stepcounter{bibnote}% + \cite{##1}% + }% + \DeclareRobustCommand*{\bibnotetext}[1][\thebibnote]{% + \let\acs@niib@after@text\relax + \acs@niib@text{##1}% + }% + \newcommand*{\printbibnotes}{% + \ifnum\the\value{bibnote}>\z@\relax + \nocite{achemso-control}% + \acs@bibliography{acs-\jobname}% + \fi + }% +} +% \end{macrocode} +%\end{macro} +%\end{macro} +%\end{macro} +%\end{macro} +%\end{macro} +%\end{macro} +%\end{macro} +%\begin{macro}{\acs@niib@after@text} +% After the text. +% \begin{macrocode} +\newcommand*{\acs@niib@after@text}{} +% \end{macrocode} +%\end{macro} +%\begin{macro}{\acs@niib@text} +% The \cs{acs@niib@text} macro is the outer part of the writing system. +% It does not absorb the text of note, as without \eTeX\ this is bad +% news. The same file is used for notes and the control entry for +% the bibliography style. +% \begin{macrocode} +\newcommand*{\acs@niib@text}{% + \@bsphack + \acs@bib@write + \if@filesw + \expandafter\acs@niib@write + \else + \expandafter\acs@niib@no@write + \fi +} +% \end{macrocode} +%\end{macro} +%\begin{macro}{\acs@niib@write} +%\begin{macro}{\acs@niib@write@aux@i} +%\begin{macro}{\acs@niib@write@aux@ii} +% Writing verbatim without \eTeX. +% \begin{macrocode} +\newcommand*{\acs@niib@write}[1]{% + \begingroup + \let\do\@makeother + \dospecials + \catcode`\{ 1\relax + \catcode`\} 2\relax + \acs@niib@write@aux@i{#1}% +} +\newcommand*{\acs@niib@write@aux@i}[1]{% + \long\def\@tempa##1{% + \def\@tempa{##1}% + \@onelevel@sanitize\@tempa + \expandafter\endgroup + \expandafter\def\expandafter\@tempa\expandafter{\@tempa}% + \acs@niib@write@aux@ii{#1}% + }% + \catcode`\^^M 10\relax + \@tempa +} +\newcommand*{\acs@niib@write@aux@ii}[1]{% + \immediate\write\acs@bib@file{% + @Misc\string{#1,^^J% + \space\space note = \string{\@tempa\string},^^J% + \string}^^J% + }% + \@esphack + \acs@niib@after@text +} +% \end{macrocode} +%\end{macro} +%\end{macro} +%\end{macro} +%\begin{macro}{\acs@niib@no@write} +% If no files are to be written, a bit of tidying up. +% \begin{macrocode} +\newcommand{\acs@niib@no@write}[2]{% + \@esphack + \acs@niib@after@text +} +% \end{macrocode} +%\end{macro} +% +%\begin{macro}{\citenumfont} +% Changes to citations can now be made. The citation styles supplied +% here require \pkg{natbib}, which is loaded with the appropriate +% options. +% \begin{macrocode} +\ifacs@super + \RequirePackage[sort&compress,numbers,super]{natbib} +\else + \RequirePackage[sort&compress,numbers,round]{natbib} + \def\citenumfont{\textit} +\fi +% \end{macrocode} +%\end{macro} +% \begin{macrocode} +\RequirePackage{natmove} +% \end{macrocode} +%\begin{macro}{\nmv@natbib@detect} +%\begin{macro}{\acs@nmv@activate} +%\begin{macro}{\acs@autonote} +% The functionality of \pkg{notes2bib} is combined with the standard +% \cs{cite} macro, to give automatic note-like data in the bibliography. +% \begin{macrocode} +\renewcommand*{\nmv@natbib@detect}{% + \ifNAT@super + \expandafter\acs@nmv@activate + \else + \expandafter\acs@autonote + \fi +} +\newcommand*{\acs@nmv@activate}{% + \let\nmv@citex@nat\@citex + \let\@citex\nmv@citex + \let\nmv@cite\cite + \renewcommand*{\cite}[2][]{% + \nmv@ifmtarg{##1}{% + \nmv@citetrue + \nmv@cite{##2}% + }{% + \nocite{##2}% + \bibnote{Ref.~\citenum{##2}, ##1}% + }% + }% +} +\newcommand*{\acs@autonote}{% + \let\nmv@cite\cite + \renewcommand*{\cite}[2][]{% + \nmv@ifmtarg{##1}{% + \nmv@cite{##2}% + }{% + \nocite{##2}% + \bibnote{Ref.~\citenum{##2}, ##1}% + }% + }% +} +% \end{macrocode} +%\end{macro} +%\end{macro} +%\end{macro} +% +%\begin{macro}{\acs@bibstyle} +% The next step is to sort out bibliography formatting. With both the +% package and the class, the bibliography style is determined without +% user intervention. The style is stored as it may need to be +% altered later. +% \begin{macrocode} +\newcommand*{\acs@bibstyle}{achemso} +\bibliographystyle{achemso} +\ifacs@biochem + \renewcommand*{\acs@bibstyle}{biochem} + \bibliographystyle{biochem} +\fi +% \end{macrocode} +%\end{macro} +%\begin{macro}{\acs@bibliographystyle} +%\begin{macro}{\bibliographystyle} +% The original \cs{bibliographystyle} macro is now disabled: the +% underlying command is repeated otherwise problems cop up with +% \pkg{chapterbib}. +% \begin{macrocode} +\newcommand*{\acs@bibliographystyle}{} +\let\acs@bibliographystyle\bibliographystyle +\renewcommand*{\bibliographystyle}[1]{% + \acs@warning{\string\bibliographystyle\space ignored}% + \expandafter\acs@bibliographystyle\expandafter{\acs@bibstyle}% +} +% \end{macrocode} +%\end{macro} +%\end{macro} +% +%\begin{macro}{\acs@bib@file} +%\begin{macro}{\acs@bib@message} +%\begin{macro}{\acs@bib@name} +% Some information or creating the control file for \BibTeX\ is set up. +% \begin{macrocode} +\newwrite\acs@bib@file +\newcommand*{\acs@bib@message}{% + This is an auxiliary file used by the `achemso' bundle.^^J% + This file may safely be deleted. It will be recreated as + required.^^J +} +\newcommand*{\acs@bib@name}{acs-\jobname.bib} +% \end{macrocode} +%\end{macro} +%\end{macro} +%\end{macro} +%\begin{macro}{\ifacs@bib@written} +%\begin{macro}{\acs@bib@write} +%\begin{macro}{\acs@bib@write@aux} +% The control information for \BibTeX\ needs to be written to a special +% file. The main writing macro is quite simple. Actually writing the +% information is left to the code for \cs{bibliography}, so that this +% only happens if needed. +% \begin{macrocode} +\newif\ifacs@bib@written +\newcommand*{\acs@bib@write}{% + \if@filesw + \ifacs@bib@written\else + \expandafter\expandafter\expandafter\acs@bib@write@aux + \fi + \fi +} +\newcommand*{\acs@bib@write@aux}{% + \immediate\openout\acs@bib@file\acs@bib@name\relax + \immediate\write\acs@bib@file{\acs@bib@message}% + \edef\@tempa##1##2{% + \space\space##1\space = \space"##2",^^J% + }% + \immediate\write\acs@bib@file{% + @Control\string{% + achemso-control,^^J% + \@tempa{ctrl-use-title}{% + \ifacs@usetitle yes\else no\fi + }% + \@tempa{ctrl-etal-number}{\acs@maxauthors}% + \string}^^J% + }% + \immediate\write\@auxout{% + \string\citation\string{achemso-control\string}% + }% + \global\acs@bib@writtentrue + \AtEndDocument{% + \immediate\closeout\acs@bib@file\relax + }% +} +% \end{macrocode} +%\end{macro} +%\end{macro} +%\end{macro} +% +% The \pkg{mciteplus} package allows the construction of lists of +% references with sub-letters. However, it might not be available, and +% so it is only loaded if available: the \file{.bst} files should work +% either way. +% \begin{macrocode} +\IfFileExists{mciteplus.sty}{% + \RequirePackage{mciteplus} +}{} +% \end{macrocode} +% +%\begin{macro}{\acs@bibliography} +%\begin{macro}{\bibliography} +% The \cs{bibliography} macro is now patched so that everything works +% correctly. There are two things to do, the patch itself and a citation +% for the control file. +% \begin{macrocode} +\AtBeginDocument{% + \let\acs@bibliography\bibliography + \renewcommand*{\bibliography}[1]{% + \acs@bib@write + \acs@bibliography{acs-\jobname,#1}% + }% +} +%</package|class> +% \end{macrocode} +%\end{macro} +%\end{macro} +% +%\subsection{Late class-only code} +% +% Most of the power of the class is now created. First, a few options +% are reset so that any given by the user are effectively ignored. +% \begin{macrocode} +%<*class> +\setkeys{acs}{ + biblabel = brackets, + biochem = false, + maxauthors = 15, + super = true, + usetitle = false +} +% \end{macrocode} +% When using the class, \pkg{notes2bib} is always emulated. Other +% standard support packages can now be loaded. +% \begin{macrocode} +\acs@niib@create \RequirePackage[T1]{fontenc} +\RequirePackage[margin=2.54cm]{geometry} \RequirePackage[scaled=0.90]{helvet} -\RequirePackage{mathptmx,courier,setspace,graphicx,truncate, - float,varioref,url,caption} +\RequirePackage{ + caption, + courier, + float, + graphicx, + mathptmx, + setspace, + url, + varioref +} \AtBeginDocument{\doublespacing} % \end{macrocode} -% -%\subsection{Meta-data changes} +% %\begin{macro}{\title} +%\changes{v3.2}{2009/04/19}{ +% Short title no longer used although optional argument still +% accepted: removed internal \cs{@shorttitle} macro +%} %\begin{macro}{\@title} %\begin{macro}{\acs@title} -%\begin{macro}{\@shorttitle} -% For the meta-data, the \REVTeX\ bundle provides a good model for -% the commands to give the author. First of all, the \cs{title} -% macro is given an optional argument. \cs{gdef} is used here to +% For the meta-data, the REV\TeX\ bundle provides a good model for +% the commands to give the author. \cs{gdef} is used here to % avoid any odd grouping issues. The various title macros are all % ``trapped'' in the preamble. As the argument of \cs{title} is % needed in the document body, \cs{acs@title} is defined to store it @@ -698,22 +1248,21 @@ citations after punctuation. \renewcommand*{\title}[2][]{% \gdef\@title{#2}% \gdef\acs@title{#2}% - \gdef\@shorttitle{#1}} +} \@onlypreamble\title % \end{macrocode} %\end{macro} %\end{macro} %\end{macro} -%\end{macro} -%\begin{macro}{\acs@authorcnt} -%\begin{macro}{\acs@affilcnt} -%\begin{macro}{\acs@altaffilcnt} -% Still following \REVTeX, the \cs{author} macro is redefined. In -% this way, each author is given as a separate \cs{author} argument. +%\begin{macro}{\acs@author@cnt} +%\begin{macro}{\acs@affil@cnt} +%\begin{macro}{\acs@affil@alt@cnt} +% \pkg{achemso} tracks the number authors, affiliations and alternative +% affiliations. % \begin{macrocode} -\newcount\acs@authorcnt -\newcount\acs@affilcnt -\newcount\acs@altaffilcnt +\newcount\acs@author@cnt +\newcount\acs@affil@cnt +\newcount\acs@affil@alt@cnt % \end{macrocode} %\end{macro} %\end{macro} @@ -727,14 +1276,13 @@ citations after punctuation. % locally incremented to keep the logic of the code clear elsewhere. % \begin{macrocode} \renewcommand*{\author}[1]{% - \global\advance\acs@authorcnt\@ne\relax - \expandafter\gdef\csname @author@\@roman\the\acs@authorcnt\endcsname - {#1}% + \global\advance\acs@author@cnt\@ne\relax + \expandafter\gdef\csname @author@\@roman\acs@author@cnt\endcsname{#1}% \begingroup - \advance\acs@affilcnt\@ne - \expandafter\xdef\csname @author@affil@\@roman\the\acs@authorcnt - \endcsname - {\the\acs@affilcnt}% + \advance\acs@affil@cnt\@ne + \expandafter\xdef\csname @author@affil@\@roman + \acs@author@cnt\endcsname + {\the\acs@affil@cnt}% \endgroup } \@onlypreamble\author @@ -745,13 +1293,17 @@ citations after punctuation. % Neither \cs{and} nor \cs{thanks} are used by the document class. % \begin{macrocode} \renewcommand*{\and}{% - \ClassError{achemso}{\string\and\space not supported} - {The achemso class does not use \string\and - \MessageBreak see the documentation for details}} -\renewcommand*{\thanks}[1]{% - \ClassError{achemso}{\string\thanks\space not supported} - {The achemso class does not use \string\thanks - \MessageBreak see the documentation for details}} + \acs@warning{% + \string\and\space not used by the achemso class: please see + the\MessageBreak package documentation for details% + }% +} +\renewcommand*{\thanks}{% + \acs@warning{% + \string\thanks\space not used by the achemso class: please see + the\MessageBreak the package documentation for details% + }% +} % \end{macrocode} %\end{macro} %\end{macro} @@ -762,25 +1314,25 @@ citations after punctuation. % been seen. % \begin{macrocode} \newcommand*{\affiliation}[2][\relax]{% - \ifnum\acs@authorcnt>\z@\relax + \ifnum\acs@author@cnt>\z@\relax \acs@affil@ifdup{#2}{% \acs@affil@swap{#2}% }{% - \global\advance\acs@affilcnt\@ne - \expandafter\gdef\csname @address@\@roman\acs@affilcnt - \endcsname{#2}% + \global\advance\acs@affil@cnt\@ne\relax + \expandafter\gdef\csname @address@\@roman\acs@affil@cnt\endcsname + {#2}% \ifx\relax#1\relax - \expandafter\gdef\csname @affil@\@roman\acs@affilcnt - \endcsname{#2}% + \expandafter\gdef\csname @affil@\@roman\acs@affil@cnt\endcsname + {#2}% \else - \expandafter\gdef\csname @affil@\@roman\acs@affilcnt - \endcsname{#1}% + \expandafter\gdef\csname @affil@\@roman\acs@affil@cnt\endcsname + {#1}% \fi }% \else - \ClassWarning{achemso} - {Affiliation with no author}% - \fi} + \acs@warning{Affiliation with no author}% + \fi +} \@onlypreamble\affiliation % \end{macrocode} %\end{macro} @@ -790,26 +1342,27 @@ citations after punctuation. % \begin{macrocode} \newcommand*{\acs@affil@ifdup}[1]{% \begingroup - \def\acs@tempa{#1}% - \acs@switchfalse - \acs@tempcnta\z@\relax + \def\@tempa{#1}% + \@tempswafalse + \@tempcnta\z@\relax \acs@affil@ifdup@aux - \ifacs@switch + \if@tempswa \aftergroup\@firstoftwo \else \aftergroup\@secondoftwo \fi - \endgroup + \endgroup } \newcommand*{\acs@affil@ifdup@aux}{% - \advance\acs@tempcnta\@ne\relax - \expandafter\expandafter\expandafter\def\expandafter\expandafter - \expandafter\acs@tempb\expandafter\expandafter\expandafter - {\csname @address@\@roman\acs@tempcnta\endcsname}% - \ifx\acs@tempa\acs@tempb - \expandafter\acs@switchtrue + \advance\@tempcnta\@ne\relax + \edef\@tempb{% + \expandafter\noexpand\csname @address@\@roman\@tempcnta\endcsname + }% + \expandafter\def\expandafter\@tempb\expandafter{\@tempb}% + \ifx\@tempa\@tempb + \expandafter\@tempswatrue \else - \ifnum\acs@tempcnta<\acs@affilcnt\relax + \ifnum\@tempcnta<\acs@affil@cnt\relax \expandafter\expandafter\expandafter\acs@affil@ifdup@aux \fi \fi @@ -826,22 +1379,23 @@ citations after punctuation. % \begin{macrocode} \newcommand*{\acs@affil@swap}[1]{% \begingroup - \def\acs@tempa{#1}% - \acs@tempcnta\z@\relax - \acs@tempcntb\z@\relax + \def\@tempa{#1}% + \@tempcnta\z@\relax + \@tempcntb\z@\relax \acs@affil@ifdup@aux - \advance\acs@affilcnt\@ne\relax + \advance\acs@affil@cnt\@ne\relax \acs@affil@swap@aux \endgroup } \newcommand*{\acs@affil@swap@aux}{% - \advance\acs@tempcntb\@ne\relax - \expandafter\ifnum\csname @author@affil@\@roman - \acs@tempcntb\endcsname = \acs@affilcnt\relax - \expandafter\xdef\csname @author@affil@\@roman - \acs@tempcntb\endcsname{\the\acs@tempcnta}% + \advance\@tempcntb\@ne\relax + \expandafter\ifnum\csname @author@affil@\@roman\@tempcntb\endcsname + = \acs@affil@cnt\relax + \expandafter\xdef\csname @author@affil@\@roman\@tempcntb\endcsname{% + \the\@tempcnta + }% \fi - \ifnum\acs@tempcntb<\acs@authorcnt\relax + \ifnum\@tempcntb<\acs@author@cnt\relax \expandafter\acs@affil@swap@aux \fi } @@ -855,42 +1409,44 @@ citations after punctuation. % authors. This is tracked on a per author basis. % \begin{macrocode} \newcommand*{\alsoaffiliation}[2][\relax]{% - \ifnum\acs@authorcnt>\z@\relax + \ifnum\acs@author@cnt>\z@\relax \acs@affil@ifdup{#2}{% \acs@alsoaffil@find{#2}% }{% - \global\advance\acs@affilcnt\@ne - \acs@tempcnta\acs@affilcnt\relax - \expandafter\gdef\csname @address@\@roman\acs@affilcnt - \endcsname{#2}% + \global\advance\acs@affil@cnt\@ne\relax + \@tempcnta\acs@affil@cnt\relax + \expandafter\gdef\csname @address@\@roman\acs@affil@cnt\endcsname + {#2}% \ifx\relax#1\relax - \expandafter\gdef\csname @affil@\@roman\acs@affilcnt - \endcsname{#2}% + \expandafter\gdef\csname @affil@\@roman\acs@affil@cnt\endcsname + {#2}% \else - \expandafter\gdef\csname @affil@\@roman\acs@affilcnt - \endcsname{#1}% + \expandafter\gdef\csname @affil@\@roman\acs@affil@cnt\endcsname + {#1}% \fi }% - \@ifundefined{@author@alsoaffil@\@roman\acs@authorcnt}{% - \expandafter\xdef\csname @author@alsoaffil@\@roman\acs@authorcnt - \endcsname{\the\acs@tempcnta}% + \@ifundefined{@author@alsoaffil@\@roman\acs@author@cnt}{% + \expandafter\xdef\csname @author@alsoaffil@\@roman\acs@author@cnt + \endcsname{\the\@tempcnta}% }{% - \expandafter\xdef\csname @author@alsoaffil@\@roman\acs@authorcnt - \endcsname{\csname @author@alsoaffil@\@roman\acs@authorcnt - \endcsname,\the\acs@tempcnta}% - } + \expandafter\xdef\csname @author@alsoaffil@\@roman\acs@author@cnt + \endcsname{% + \csname @author@alsoaffil@\@roman\acs@author@cnt\endcsname + ,\the\@tempcnta + }% + }% \else - \ClassWarning{achemso} - {Affiliation with no author}% - \fi} + \acs@warning{Affiliation with no author}% + \fi +} \newcommand*{\acs@alsoaffil@find}[1]{% \begingroup - \def\acs@tempa{#1}% - \acs@tempcnta\z@\relax - \acs@tempcntb\z@\relax + \def\@tempa{#1}% + \@tempcnta\z@\relax + \@tempcntb\z@\relax \acs@affil@ifdup@aux \expandafter\endgroup - \expandafter\acs@tempcnta\the\acs@tempcnta\relax + \expandafter\@tempcnta\the\@tempcnta\relax } % \end{macrocode} %\end{macro} @@ -900,16 +1456,16 @@ citations after punctuation. % affiliation is ``attached'' to the author. % \begin{macrocode} \newcommand*{\altaffiliation}[1]{% - \ifnum\acs@authorcnt>\z@\relax - \global\advance\acs@altaffilcnt\@ne\relax - \expandafter\gdef\csname @altaffil@\@roman\acs@authorcnt - \endcsname{#1}% - \expandafter\xdef\csname @author@altaffil@\@roman\acs@authorcnt - \endcsname{\the\acs@altaffilcnt}% + \ifnum\acs@author@cnt>\z@\relax + \global\advance\acs@affil@alt@cnt\@ne\relax + \expandafter\gdef\csname @altaffil@\@roman\acs@author@cnt\endcsname + {#1}% + \expandafter\xdef\csname @author@altaffil@\@roman\acs@author@cnt + \endcsname{\the\acs@affil@alt@cnt}% \else - \ClassWarning{achemso} - {Affiliation with no author}% - \fi} + \acs@warning{Affiliation with no author}% + \fi +} \@onlypreamble\altaffiliation % \end{macrocode} %\end{macro} @@ -917,329 +1473,402 @@ citations after punctuation. % E-mail addresses are attached to authors as well. % \begin{macrocode} \newcommand*{\email}[1]{% - \ifnum\acs@authorcnt>\z@\relax - \expandafter\gdef\csname @email@\@roman\acs@authorcnt - \endcsname{#1}% + \ifnum\acs@author@cnt>\z@\relax + \expandafter\gdef\csname @email@\@roman\acs@author@cnt\endcsname + {#1}% \else - \ClassWarning{achemso} - {E-mail with no author}% - \fi} + \acs@warning{E-mail with no author}% + \fi +} \@onlypreamble\email % \end{macrocode} %\end{macro} +% %\begin{macro}{\@maketitle} -%\changes{v3.0a}{2008/08/21}{Skips footnotes for a single -% institution} +%\changes{v3.0a}{2008/08/21}{ +% Skips footnotes for a single institution +%} %\changes{v3.1}{2008/08/28}{Slightly simplified code} % With the changes outlined above in place, a new \cs{@maketitle} % macro is needed. This is partially a copy of the existing, but -% rather heavily modified. +% rather heavily modified. Some classes need a page break after the +% title: a hook is provided for this. % \begin{macrocode} \renewcommand*{\@maketitle}{% - \ifnum\acs@authorcnt<\z@\relax - \ClassError{achemso}{No authors defined} - {At least one author is required}% + \ifnum\acs@author@cnt<\z@\relax + \acs@warning{No authors defined: At least one author is required}% \fi \newpage \null - \vskip 2em% - \begin{center}% - {\LARGE\bfseries\sffamily - \renewcommand*{\acs@tempa}{suppinfo}% - \ifx\acs@manuscript\acs@tempa - Supporting information for: - \fi - \@title \par}% + \vskip 2em\relax + \begin{center} + {% + \LARGE\bfseries\sffamily + \def\@tempa{suppinfo}% + \ifx\acs@manuscript\@tempa + Supporting information for: + \fi + \@title + \par + }% \vskip 1.5em\relax - {\large\sffamily\frenchspacing \acs@authorlist}% - \vskip 1em% - {\itshape\acs@addresslist}% + {% + \large\sffamily\frenchspacing\acs@author@list + }% \vskip 1em\relax - {\sffamily E-mail: \acs@emaillist}% + {% + \itshape\acs@address@list + }% + \vskip 1em\relax + {% + \sffamily E-mail: \acs@email@list + }% \end{center} \par - \vskip 1.5em\relax} + \vskip 1.5em\relax +} % \end{macrocode} %\end{macro} %\begin{macro}{\@thanks} -%\changes{v3.1}{2008/08/29}{Moved footnote generation -% to \cs{@thanks} macro} +%\changes{v3.1}{2008/08/29}{ +% Moved footnote generation to \cs{@thanks} macro +%} % The \cs{@thanks} macro is used as a hook to generate the footnotes if % needed. % \begin{macrocode} \renewcommand*{\@thanks}{% - \ifnum\acs@affilcnt>\@ne\relax - \acs@affilfoot + \ifnum\acs@affil@cnt>\@ne\relax + \expandafter\acs@affil@list \else - \ifnum\acs@altaffilcnt>\z@\relax - \acs@affilfoot + \ifnum\acs@affil@alt@cnt>\z@\relax + \expandafter\expandafter\expandafter\acs@affil@list \fi - \fi} + \fi +} % \end{macrocode} %\end{macro} -%\begin{macro}{\acs@authorlist} -%\begin{macro}{\acs@authorlist@aux} -%\begin{macro}{\acs@authorlist@email} -%\begin{macro}{\acs@authorlist@also} -%\begin{macro}{\acs@authorlist@alt} +%\begin{macro}{\acs@author@list} %\changes{v3.0a}{2008/08/21}{Skips footnotes for a single institution} +%\changes{v3.2}{2009/04/20}{Logic made clearer with more sub-macros} % Printing the author list needs to do several things. The appropriate % separators between authors are created and the author names % themselves are printed. % \begin{macrocode} -\newcommand*{\acs@authorlist}{% - \acs@tempcnta\z@\relax - \acs@tempcntb\acs@affilcnt\relax - \ifnum\acs@authorcnt=\z@\relax - \ClassError{achemso}{No authors given} - {No authors were specified for the paper}% - \else - \expandafter\acs@authorlist@aux - \fi} -\newcommand*{\acs@authorlist@aux}{% - \advance\acs@tempcnta\@ne\relax - \def\acs@tempa{}% - \ifnum\acs@authorcnt=\@ne\relax\else - \ifnum\acs@tempcnta=\acs@authorcnt\relax +\newcommand*{\acs@author@list}{% + \@tempcnta\z@\relax + \@tempcntb\acs@affil@cnt\relax + \ifnum\acs@author@cnt=\z@\relax\else + \expandafter\acs@author@list@main + \fi +} +% \end{macrocode} +%\end{macro} +%\begin{macro}{\acs@author@footnotes} +%\begin{macro}{\acs@author@list@main} +% The main control macro for producing the author list iterates over +% each author on the list. The result is stored as +% \cs{acs@author@listing}. +% \begin{macrocode} +\newcommand*{\acs@author@footnotes}{} +\newcommand*{\acs@author@list@main}{% + \advance\@tempcnta\@ne\relax + \def\acs@author@footnotes{}% + \acs@author@list@and + \space + \@nameuse{@author@\@roman\@tempcnta}% + \acs@author@list@comma + \acs@author@star + \acs@author@affil + \acs@author@affil@also + \acs@author@affil@alt + \ifx\@empty\acs@author@footnotes\else + \textsuperscript{\acs@author@footnotes}% + \fi + \ifnum\@tempcnta<\acs@author@cnt\relax + \expandafter\acs@author@list@main + \fi +} +% \end{macrocode} +%\end{macro} +%\end{macro} +%\begin{macro}{\acs@author@list@and} +%\begin{macro}{\acs@author@list@comma} +% Simple checks to add an ``and'' and a comma. +% \begin{macrocode} +\newcommand*{\acs@author@list@and}{% + \ifnum\acs@author@cnt=\@ne\relax\else + \ifnum\@tempcnta=\acs@author@cnt\relax \space and% \fi \fi - \space - \csname @author@\@roman\acs@tempcnta\endcsname - \ifnum\acs@tempcnta<\acs@authorcnt +} +\newcommand*{\acs@author@list@comma}{% + \ifnum\@tempcnta<\acs@author@cnt\relax ,% \fi - \begingroup - \@ifundefined{@email@\@roman\acs@tempcnta} - {} - {\aftergroup\acs@authorlist@email}% - \endgroup +} % \end{macrocode} -% A check on putting \cs{affiliation} before authors but not after. +%\end{macro} +%\end{macro} +%\begin{macro}{\acs@author@star} +%\begin{macro}{\acs@author@star@aux} +% A check for an e-mail for an author: if so, add a star. % \begin{macrocode} - \begingroup - \expandafter\acs@tempcntb\csname @author@affil@\@roman - \acs@tempcnta\endcsname\relax - \@ifundefined{@affil@\@roman\acs@tempcntb} - {\ClassError{achemso}{Affiliation not given} - {No affiliation has been given for author\MessageBreak - \csname @author@\@roman\acs@tempcnta\endcsname}} - {}% - \endgroup +\newcommand*{\acs@author@star}{% + \acs@ifundefined{@email@\@roman\@tempcnta}{}{% + \acs@author@star@aux + }% +} +\newcommand*{\acs@author@star@aux}{% + \protected@edef\acs@author@footnotes{% + \acs@author@fnsymbol{\z@}% + \ifnum\acs@affil@cnt>\@ne\relax + ,% + \else + \ifnum\acs@affil@alt@cnt>\z@\relax + ,% + \fi + \fi + }% +} % \end{macrocode} -% If there are at least two affiliations, then a symbol must be -% produced. Of course, if there is only one main affiliation it must -% have symbol one! +%\end{macro} +%\end{macro} +%\begin{macro}{\acs@author@affil} +%\begin{macro}{\acs@author@affil@aux} +% The main affiliation of the author is checked for, and assuming one +% is found the appropriate symbol is added to the list. % \begin{macrocode} - \ifnum\acs@affilcnt>\@ne\relax - \protected@edef\acs@tempa{% - \acs@tempa - \acs@fnsymbol{% - \csname @author@affil@\@roman\acs@tempcnta\endcsname +\newcommand*{\acs@author@affil}{% + \acs@ifundefined{% + @affil@\@roman\csname @author@affil@\@roman\@tempcnta\endcsname + }{% + \acs@warning{% + No affiliation given for author\MessageBreak + \@nameuse{@author@\@roman\@tempcnta}% + }% + }{% + \acs@author@affil@aux + }% +} +\newcommand*{\acs@author@affil@aux}{% + \ifnum\acs@affil@cnt>\@ne\relax + \protected@edef\acs@author@footnotes{% + \acs@author@footnotes + \acs@author@fnsymbol{% + \@nameuse{@author@affil@\@roman\@tempcnta}% }% }% \else - \ifnum\acs@altaffilcnt>\z@\relax - \protected@edef\acs@tempa{\acs@tempa\acs@fnsymbol{\@ne}}% + \ifnum\acs@affil@alt@cnt>\z@\relax + \protected@edef\acs@author@fnsymbol{% + \acs@author@footnotes + \acs@author@fnsymbol{\@ne}% + }% \fi \fi +} % \end{macrocode} -% Secondary affiliations that are shared are included. -% \begin{macrocode} - \begingroup - \@ifundefined{@author@alsoaffil@\@roman\acs@tempcnta} - {} - {\aftergroup\acs@authorlist@also}% - \endgroup -% \end{macrocode} -% To get the correct symbols for the alternative affiliations, a track -% of the number has to be kept. +%\end{macro} +%\end{macro} +%\begin{macro}{\acs@author@affil@also} +%\begin{macro}{\acs@author@affil@also@aux} +% The ``also'' affiliations are generated by a loop as there may be more +% than one. % \begin{macrocode} - \begingroup - \@ifundefined{@author@altaffil@\@roman\acs@tempcnta} - {} - {\aftergroup\acs@authorlist@alt}% - \endgroup - \ifx\@empty\acs@tempa\@empty\else - \textsuperscript{\acs@tempa}% - \fi - \ifnum\acs@tempcnta<\acs@authorcnt - \expandafter\acs@authorlist@aux - \fi -} -\newcommand*{\acs@authorlist@email}{% - \protected@edef\acs@tempa{% - \acs@fnsymbol{\z@}% - \ifnum\acs@affilcnt>\@ne\relax - ,% - \else - \ifnum\acs@altaffilcnt>\z@\relax - ,% - \fi - \fi +\newcommand*{\acs@author@affil@also}{% + \acs@ifundefined{@author@alsoaffil@\@roman\@tempcnta}{}{% + \acs@author@affil@also@aux }% } -\newcommand*{\acs@authorlist@also}{% - \expandafter\@for\expandafter\acs@tempb\expandafter:\expandafter - =\csname @author@alsoaffil@\@roman\acs@tempcnta\endcsname\do{% - \protected@edef\acs@tempa{% - \acs@tempa +\newcommand*{\acs@author@affil@also@aux}{% + \expandafter\@for\expandafter\@tempa\expandafter:\expandafter + =\csname @author@alsoaffil@\@roman\@tempcnta\endcsname\do{% + \protected@edef\acs@author@footnotes{% + \acs@author@footnotes ,% - \acs@fnsymbol{\acs@tempb}% + \acs@author@fnsymbol{\@tempa}% }% }% } -\newcommand*{\acs@authorlist@alt}{% - \advance\acs@tempcntb\@ne\relax - \protected@edef\acs@tempa{% - \acs@tempa +% \end{macrocode} +%\end{macro} +%\end{macro} +%\begin{macro}{\acs@author@affil@alt} +%\begin{macro}{\acs@author@affil@alt@aux} +% Alternative affiliations use the secondary counter \cs{@tempcntb}, +% which starts out at the end of the main list. +% \begin{macrocode} +\newcommand*{\acs@author@affil@alt}{% + \acs@ifundefined{@author@altaffil@\@roman\@tempcnta}{}{% + \acs@author@affil@alt@aux + }% +} +\newcommand*{\acs@author@affil@alt@aux}{% + \advance\@tempcntb\@ne\relax + \protected@edef\acs@author@footnotes{% + \acs@author@footnotes ,% - \acs@fnsymbol{\acs@tempcntb}% + \acs@author@fnsymbol{\@tempcntb}% }% } % \end{macrocode} %\end{macro} %\end{macro} -%\end{macro} -%\end{macro} -%\end{macro} -%\begin{macro}{\acs@fnsymbol} +%\begin{macro}{\acs@author@fnsymbol} %\changes{v3.1}{2008/09/04}{Extended symbols available} % The ACS have an extended list of symbols. The star appears at the % special position zero. % \begin{macrocode} -\newcommand*{\acs@fnsymbol}[1]{% - \ensuremath{\ifcase#1 *\or \dagger\or \ddagger\or \P\or - \S\or \|\or \bot\or \#\or @\or \triangle\or \nabla\else - \ClassError{achemso}{Too many affiliations} - {There are no symbols left: complain to the package - author}\fi}} +\newcommand*{\acs@author@fnsymbol}[1]{% + \ensuremath{% + \ifcase #1 *\or + \dagger\or + \ddagger\or + \P\or + \S\or + \|\or + \bot\or + \#\or + @\or + \triangle\or + \nabla\else + #1% + \fi + }% +} % \end{macrocode} %\end{macro} -%\begin{macro}{\acs@addresslist} -%\begin{macro}{\acs@addresslist@aux} -% The main address block works in a similar way to the author printing. +%\begin{macro}{\acs@address@list} +%\begin{macro}{\acs@address@list@aux} +% The main address block is rather less complex than the author +% printing: one print job per address. % \begin{macrocode} -\newcommand*{\acs@addresslist}{% - \ifnum\acs@affilcnt>\z@\relax - \acs@tempcnta\z@\relax - \acs@addresslist@aux +\newcommand*{\acs@address@list}{% + \@tempcnta\z@\relax + \ifnum\acs@affil@cnt>\z@\relax + \acs@address@list@aux \else - \ClassError{achemso}{No affiliations} - {At least one affiliation is needed}% - \fi} -\newcommand*{\acs@addresslist@aux}{% - \advance\acs@tempcnta\@ne\relax - \ifnum\acs@affilcnt>\@ne\relax - \ifnum\acs@tempcnta=\acs@affilcnt\relax + \acs@warning{% + No affiliations: at least one affiliation is needed% + }% + \fi +} +\newcommand*{\acs@address@list@aux}{% + \advance\@tempcnta\@ne\relax + \ifnum\acs@affil@cnt>\@ne\relax + \ifnum\@tempcnta=\acs@affil@cnt\relax and \fi \fi - \csname @address@\@roman\acs@tempcnta\endcsname - \ifnum\acs@tempcnta<\acs@affilcnt\relax + \@nameuse{@address@\@roman\@tempcnta}% + \ifnum\@tempcnta<\acs@affil@cnt\relax , - \expandafter\acs@addresslist@aux + \expandafter\acs@address@list@aux \fi } % \end{macrocode} %\end{macro} %\end{macro} -%\begin{macro}{\acs@affilfoot} %\begin{macro}{\acs@fnsymbol@org} -%\changes{v3.0a}{2008/08/21}{Fixed bugs in printing affiliations -% correctly} -%\begin{macro}{\acs@affil@foot} -%\begin{macro}{\acs@altaffil@foot} -%\begin{macro}{\acs@altaffil@foot@aux} +%\changes{v3.0a}{2008/08/21}{ +% Fixed bugs in printing affiliations correctly +%} +%\begin{macro}{\acs@affil@list} +%\begin{macro}{\acs@affil@list@aux} % Footnotes are done in two stages. First the main affiliation is -% handled, then the possible alternative. +% handled, then the possible alternative. There is a need to check for +% the possibility that there is only one main affiliation but one or +% more alternative ones. % \begin{macrocode} -\newcommand*{\acs@affilfoot}{% +\newcommand*{\acs@fnsymbol@org}{} +\newcommand*{\acs@affil@list}{% \let\acs@fnsymbol@org\@fnsymbol - \let\@fnsymbol\acs@fnsymbol - \acs@tempcnta\z@\relax - \acs@tempcntb\z@\relax - \ifnum\acs@affilcnt>\@ne\relax - \acs@affil@foot + \let\@fnsymbol\acs@author@fnsymbol + \@tempcnta\z@\relax + \@tempcntb\z@\relax + \ifnum\acs@affil@cnt>\@ne\relax + \expandafter\acs@affil@list@aux \else - \ifnum\acs@altaffilcnt>\z@\relax + \ifnum\acs@affil@alt@cnt>\z@\relax \footnotetext[\@ne]{\@affil@i}% - \acs@tempcnta\@ne\relax + \@tempcnta\@ne\relax \fi \fi - \ifnum\acs@altaffilcnt>\z@\relax - \acs@altaffil@foot - \fi - \let\@fnsymbol\acs@fnsymbol@org} -\newcommand*{\acs@affil@foot}{% - \advance\acs@tempcnta\@ne\relax - \footnotetext[\acs@tempcnta] - {\csname @affil@\@roman\acs@tempcnta\endcsname}% - \ifnum\acs@tempcnta<\acs@affilcnt\relax - \expandafter\acs@affil@foot - \fi} -\newcommand*{\acs@altaffil@foot}{% - \advance\acs@tempcntb\@ne\relax - \begingroup - \@ifundefined{@altaffil@\@roman\acs@tempcntb} - {} - {\aftergroup\acs@altaffil@foot@aux}% - \endgroup - \ifnum\acs@tempcntb<\acs@authorcnt\relax - \expandafter\acs@altaffil@foot + \ifnum\acs@affil@alt@cnt>\z@\relax + \expandafter\acs@affil@alt@list \fi + \let\@fnsymbol\acs@fnsymbol@org } -\newcommand*{\acs@altaffil@foot@aux}{% - \advance\acs@tempcnta\@ne\relax - \footnotetext[\acs@tempcnta] - {\csname @altaffil@\@roman\acs@tempcntb\endcsname}% +\newcommand*{\acs@affil@list@aux}{% + \advance\@tempcnta\@ne\relax + \footnotetext[\@tempcnta]{\@nameuse{@affil@\@roman\@tempcnta}}% + \ifnum\@tempcnta<\acs@affil@cnt\relax + \expandafter\acs@affil@list@aux + \fi } % \end{macrocode} %\end{macro} %\end{macro} %\end{macro} +%\begin{macro}{\acs@affil@alt@list} +%\begin{macro}{\acs@affil@alt@lista@aux} +% The secondary loop for alternative affiliations is similar. +% \begin{macrocode} +\newcommand*{\acs@affil@alt@list}{% + \advance\@tempcntb\@ne\relax + \acs@ifundefined{@altaffil@\@roman\@tempcntb}{}{% + \acs@altaffil@foot@aux + } + \ifnum\@tempcntb<\acs@author@cnt\relax + \expandafter\acs@affil@alt@list + \fi +} +\newcommand*{\acs@altaffil@foot@aux}{% + \advance\@tempcnta\@ne\relax + \footnotetext[\@tempcnta]{\@nameuse{@altaffil@\@roman\@tempcntb}}% +} +% \end{macrocode} %\end{macro} %\end{macro} -%\begin{macro}{\acs@emaillist} -%\changes{v3.0a}{2008/08/21}{Fixed error if only one address is given} %\begin{macro}{\acs@email@list} +%\changes{v3.0a}{2008/08/21}{Fixed error if only one address is given} +%\begin{macro}{\acs@email@list@aux} % The final piece of meta-data to print is the e-mail address list. % The total number of e-mail addresses given it counted in -% \cs{acs@tempcntb}, which means a warning can be given if there are +% \cs{@tempcntb}, which means a warning can be given if there are % none. The group is used so that \cs{UrlFont} can be set correctly. % \begin{macrocode} -\newcommand*{\acs@emaillist}{% - \begingroup - \renewcommand*{\UrlFont}{\sf}% - \acs@tempcnta\z@\relax - \acs@tempcntb\z@\relax - \acs@email@list - \expandafter\endgroup\expandafter\acs@tempcntb\number - \acs@tempcntb\relax - \ifnum\acs@tempcntb=\z@\relax - \ClassError{achemso}{No e-mail given} - {At lest one author must have a contact e-mail}% - \fi} \newcommand*{\acs@email@list}{% - \advance\acs@tempcnta\@ne\relax - \ifnum\acs@tempcnta>\acs@authorcnt\relax\else - \begingroup - \@ifundefined{@email@\@roman\acs@tempcnta} - {\aftergroup\@gobble} - {\aftergroup\@firstofone}% - \endgroup - {\advance\acs@tempcntb\@ne\relax - \ifnum\acs@tempcntb>\@ne\relax -% \end{macrocode} -% The lack of a percent sign here is deliberate. -% \begin{macrocode} - ; - \fi - \expandafter\expandafter\expandafter\url\expandafter - \expandafter\expandafter{% - \csname @email@\@roman\acs@tempcnta\endcsname}}% - \acs@email@list - \fi} + \begingroup + \def\UrlFont{\sf}% + \@tempcnta\z@\relax + \@tempcntb\z@\relax + \acs@email@list@aux + \ifnum\@tempcntb=\z@\relax + \acs@warning{% + No e-mail given:\MessageBreak + at lest one author must have a contact e-mail% + }% + \fi + \endgroup +} +\newcommand*{\acs@email@list@aux}{% + \advance\@tempcnta\@ne\relax + \ifnum\@tempcnta>\acs@author@cnt\relax\else + \acs@ifundefined{@email@\@roman\@tempcnta}{}{% + \advance\@tempcntb\@ne\relax + \ifnum\@tempcntb>\@ne\relax + ; + \fi + \expandafter\expandafter\expandafter\url\expandafter + \expandafter\expandafter{% + \csname @email@\@roman\@tempcnta\endcsname + }% + }% + \expandafter\acs@email@list@aux + \fi +} % \end{macrocode} %\end{macro} %\end{macro} @@ -1249,8 +1878,7 @@ citations after punctuation. % \begin{macrocode} \g@addto@macro{\document}{\maketitle} % \end{macrocode} -% -%\subsection{Floats} +% %\begin{environment}{scheme} %\begin{environment}{chart} %\changes{v3.1}{2008/08/29}{Fixed scheme naming} @@ -1292,7 +1920,10 @@ citations after punctuation. % Floats are all centred. % \begin{macrocode} \let\acs@floatboxreset\@floatboxreset -\renewcommand*{\@floatboxreset}{\centering\acs@floatboxreset} +\renewcommand*{\@floatboxreset}{% + \centering + \acs@floatboxreset +} % \end{macrocode} %\end{macro} % \pkg{varioref} is used to control the appearance of cross-references. @@ -1303,227 +1934,32 @@ citations after punctuation. \labelformat{figure}{\figurename~#1} \labelformat{table}{\tablename~#1} % \end{macrocode} -% -%\subsection{Page headers} -%\begin{macro}{\ps@achemso} -%\begin{macro}{\@oddfoot} -%\begin{macro}{\@oddhead} -% For reviewers, page headers indicating which manuscript the page -% belongs to would be useful. Rather than load \pkg{fancyhdr}, a -% low-level patch is made to the appropriate command. This is rather -% simply-minded but gives the desired output. -% \begin{macrocode} -\newcommand*{\ps@achemso}{% - \renewcommand*{\@oddfoot}{\reset@font\hfil\thepage\hfil}% - \let\@evenfoot\@oddfoot - \renewcommand*{\@oddhead}{% - \reset@font - \@author@i - \ifnum\acs@authorcnt>\@ne\relax - \space et al.% - \fi - \hfil\relax -% \end{macrocode} -% If the short title is empty, then the main title is used with some -% trimming. A check is made first, as the \cs{truncate} macro will -% left-align if the text is not actually too long. -% \begin{macrocode} - \ifx\@empty\@shorttitle\@empty - \setbox\z@\hbox{\acs@title}% - \ifdim\wd\z@>0.45\textwidth\relax - \truncate{0.45\textwidth}{\acs@title}% - \else - \acs@title - \fi - \else - \@shorttitle - \fi}% - \let\@evenhead\@oddhead} -\pagestyle{achemso} -% \end{macrocode} -%\end{macro} -%\end{macro} -%\end{macro} -% -%\subsection{Miscellaneous changes} -% Although \currpkg avoids too much formatting, the class file makes -% a few changes to keep life simple. The name of the bibliography -% should be ``Notes and References'' if any notes are added. -% \begin{macrocode} -\renewcommand*{\refname}{% - \ifnum\the\value{bibnote}>\z@\relax - Notes and - \fi References} -% \end{macrocode} -% -%\subsection{Finalisation} -%\changes{v3.1}{2008/08/28}{Moved loading of \pkg{achemso} package} -% At this stage, the \currpkg package can be loaded. Numbering -% of sections is disabled by default. -% \begin{macrocode} -\RequirePackage{achemso} -% \end{macrocode} -%\begin{macro}{\acs@manuscript} -% The article must have a type: if nothing else has been set, then -% ``article'' is used. -% \begin{macrocode} -\@ifundefined{acs@manuscript} - {\newcommand*{\acs@manuscript}{article}}{} -% \end{macrocode} -%\end{macro} -% Some settings are defined by the document type. At this stage, the -% journal file should have ensured that the type is valid. -% \begin{macrocode} -\edef\acs@tempa{note} -\ifx\acs@manuscript\acs@tempa - \acs@killsecs -\fi -\edef\acs@tempa{review} -\ifx\acs@manuscript\acs@tempa - \acs@restsecnums -\fi -\edef\acs@tempa{suppinfo} -\ifx\acs@manuscript\acs@tempa - \acs@restsecnums - \acs@setkeys{maxauthors=0} -\fi -\if@filesw - \acs@writebib -\fi -% \end{macrocode} -% -%\iffalse -%</class> -%<*package> -%\fi -%\section{The package file} -%\subsection{Setup code} -% The package file is designed to be usable with any document class. -% It sets up the basics, but leaves some settings to the class file. -% \begin{macrocode} -\NeedsTeXFormat{LaTeX2e} -\ProvidesPackage{achemso} - [2009/02/03 v3.1a Support for ACS journals] -\@ifclassloaded{achemso}{} - {\PackageInfo{achemso}{When using the achemso bundle - for\MessageBreak submission of articles to the ACS, - please\MessageBreak use the achemso document class.}} -\RequirePackage{notes2bib,mciteplus,xkeyval} -% \end{macrocode} -%\begin{macro}{\acs@tempa} -%\begin{macro}{\acs@tempb} -%\begin{macro}{\acs@tempcnta} -%\begin{macro}{\acs@tempcntb} -%\begin{macro}{\acs@tempcntc} -%\begin{macro}{\ifacs@switch} -% Some scratch macros are defined. -% \begin{macrocode} -\newcommand*{\acs@tempa}{} -\newcommand*{\acs@tempb}{} -\newcount\acs@tempcnta -\newcount\acs@tempcntb -\newcount\acs@tempcntc -\newif\ifacs@switch -% \end{macrocode} -%\end{macro} -%\end{macro} -%\end{macro} -%\end{macro} -%\end{macro} -%\end{macro} -% -%\subsection{Option handling} -%\begin{macro}{\acs@manuscript} -%\begin{macro}{\acs@journal} -%\begin{macro}{\acs@maxauthors} -%\begin{macro}{\ifacs@super} -%\begin{macro}{\ifacs@usetitle} -%\begin{macro}{\ifacs@biochemistry} -% The various keys are defined. -% \begin{macrocode} -\define@boolkeys[acs]{key}[acs@]{ - abbreviate, - biochem, - biochemistry, - super, - usetitle}[true] -\let\acs@key@biochem\acs@key@biochemistry -\define@cmdkeys[acs]{key}[acs@]{ - maxauthors, - journal, - manuscript} -\define@choicekey*[acs]{key}{biblabel} - [\acs@tempa\acs@tempb] - {plain,brackets,fullstop,period} - {\ifcase\acs@tempb\relax - \def\@biblabel##1{##1}\or - \def\@biblabel##1{(##1)}\or - \def\@biblabel##1{##1.}\or - \def\@biblabel##1{##1.}\fi} -% \end{macrocode} -%\end{macro} -%\end{macro} -%\end{macro} -%\end{macro} -%\end{macro} -%\end{macro} -%\begin{macro}{\acs@setkeys} -% A slight shortcut for setting keys. -% \begin{macrocode} -\newcommand*{\acs@setkeys}{\setkeys[acs]{key}} -% \end{macrocode} -%\end{macro} -% Default values for some of the options are set up here, before -% processing. -% \begin{macrocode} -\acs@setkeys{ - maxauthors=15, - super=true, - biblabel=brackets} -\ProcessOptionsX*[acs]<key> -% \end{macrocode} -%\begin{macro}{\acs@cfgextension} -%\begin{macro}{\acs@prefix} -% A few fixed values are used in several places. +% +%\begin{macro}{\acs@section} +%\begin{macro}{\acs@subsection} +%\begin{macro}{\acs@subsubsection} +%\begin{macro}{\acs@startsection} +% Both the numbering and existence of section headers may need to be +% altered. Some generic functions are therefore provided to deal with +% this cleanly. First, some original definitions are saved. % \begin{macrocode} -\newcommand*{\acs@cfgextension}{cfg} -\newcommand*{\acs@prefix}{acs-} +\newcommand*{\acs@section}{} +\let\acs@section\section +\newcommand*{\acs@subsection}{} +\let\acs@subsection\subsection +\newcommand*{\acs@subsubsection}{} +\let\acs@subsubsection\subsubsection +\newcommand*{\acs@startsection}{} +\let\acs@startsection\@startsection % \end{macrocode} %\end{macro} +%\end{macro} %\end{macro} -% -%\subsection{\opt{type} validation} -%\begin{macro}{\acs@validtype} -% The \opt{type} of manuscript needs to be validated by most journal -% files. A shortcut is provided here. This needs to happen before -% support files can be loaded. -% \begin{macrocode} -\newcommand*{\acs@validtype}[2][article]{% - \acs@switchfalse - \@ifundefined{acs@manuscript} - {\newcommand*{\acs@manuscript}{#1}} - {\@for\acs@tempa:=#2\do{% - \ifx\acs@tempa\acs@manuscript - \acs@switchtrue - \fi} - \ifacs@switch\else - \ClassWarning{achemso}{Invalid manuscript type: - \MessageBreak changing to #1}% - \renewcommand*{\acs@manuscript}{#1}% - \fi}} -% \end{macrocode} %\end{macro} -% -%\subsection{Section headings} -%\changes{v3.1}{2008/08/27}{Moved section modification to -% package} -%\begin{macro}{\acs@orgstartsection} -%\begin{macro}{\acs@startsection} -% The applicable section headings depend on the journal and document -% type. First, numbering of sections is killed off by default. +%\begin{macro}{\acs@startsection@alt} +% An alternative version of \cs{@startsection} which never adds numbers. % \begin{macrocode} -\let\acs@orgstartsection\@startsection -\newcommand*{\acs@startsection}[6]{% +\newcommand*{\acs@startsection@alt}[6]{% \if@noskipsec \leavevmode \fi \par \@tempskipa #4\relax @@ -1534,130 +1970,143 @@ citations after punctuation. \if@nobreak \everypar{}% \else - \addpenalty\@secpenalty\addvspace\@tempskipa + \addpenalty\@secpenalty + \addvspace\@tempskipa \fi + \@ifstar{% + \@ssect{#3}{#4}{#5}{#6}% + }{% + \@ssect{#3}{#4}{#5}{#6}% + }% +} % \end{macrocode} -% The change is here: a star makes no difference. \cs{@ifstar} means -% that any star is nicely got rid of. -% \begin{macrocode} - \@ifstar - {\@ssect{#3}{#4}{#5}{#6}} - {\@ssect{#3}{#4}{#5}{#6}}} -% \end{macrocode} -%\end{macro} %\end{macro} -%\begin{macro}{\acs@killsecnums} -%\begin{macro}{\acs@restsecnums} -% The business end. +%\begin{macro}{\acs@sections@none} +%\begin{macro}{\acs@sections@none@aux} +% When removing sections entirely, a gobble macro is needed. % \begin{macrocode} -\newcommand*{\acs@killsecnums}{% - \let\@startsection\acs@startsection} -\newcommand*{\acs@restsecnums}{% - \let\@startsection\acs@orgstartsection} -\@ifclassloaded{achemso} - {\acs@killsecnums} - {} +\newcommand*{\acs@sections@none}{% + \@ifstar{% + \acs@sections@none@aux + }{% + \acs@sections@none@aux + }% +} +\newcommand*{\acs@sections@none@aux}[2][]{% + \acs@warning{% + (Sub)section `#2' ignored% + }% +} % \end{macrocode} %\end{macro} %\end{macro} -%\begin{macro}{\acs@section} -%\begin{macro}{\acs@subsection} -% The original definitions are always available. +%\begin{macro}{\SectionNumbersOff} +%\begin{macro}{\SectionNumbersOn} +% To macros to add or remove the section numbers. The standard setting +% for the class has them on, but some configurations will turn them +% off. The names of these functions are both in design space so that +% users can change the decision easily. % \begin{macrocode} -\let\acs@section\section -\let\acs@subsection\subsection +\newcommand*{\SectionNumbersOff}{% + \let\@startsection\acs@startsection@alt +} +\@onlypreamble\SectionNumbersOff +\newcommand*{\SectionNumbersOn}{% + \let\@startsection\acs@startsection +} +\@onlypreamble\SectionNumbersOn % \end{macrocode} %\end{macro} %\end{macro} -%\begin{macro}{\acs@killsecs} -%\begin{macro}{\acs@gobblesection} -%\begin{macro}{\section} -%\begin{macro}{\subsection} -%\begin{macro}{\subsubsection} -% To kill sections entirely, a different approach is needed. The set -% to gobble up the title and if necessary the star. +%\begin{macro}{\SectionsOff} +%\begin{macro}{\SectionsOn} +% Quite similar for entire sections. % \begin{macrocode} -\newcommand*{\acs@killsecs}{% - \newcommand*{\acs@gobblesection}{% - \ClassWarning{achemso} - {Sections not allowed for this manuscript type}% - \@ifstar{\@gobble}{\@gobble}} - \let\section\acs@gobblesection - \let\subsection\acs@gobblesection - \let\subsubsection\acs@gobblesection +\newcommand*{\SectionsOff}{% + \let\section\acs@sections@none + \let\subsection\acs@sections@none + \let\subsubsection\acs@sections@none +} +\@onlypreamble\SectionsOff +\newcommand*{\SectionsOn}{% + \let\section\acs@section + \let\subsection\acs@subsection + \let\subsubsection\acs@subsubsection +} +\@onlypreamble\SectionsOn % \end{macrocode} %\end{macro} %\end{macro} -%\end{macro} -%\end{macro} -%\begin{macro}{\bibsection} -% The bibliography is altered here. +%\begin{environment}{acknowledgement} +%\begin{environment}{suppinfo} +% Simple named sections. % \begin{macrocode} - \AtBeginDocument{ - \renewcommand*{\bibsection}{\acs@section*{\refname}}}} +\newenvironment{acknowledgement}{% + \acs@subsection*{\acknowledgementname}% +}{} +\newenvironment{suppinfo}{% + \acs@subsection*{\suppinfoname}% +}{} % \end{macrocode} -%\end{macro} -%\end{macro} -%\begin{macro}{\acknowledgement} -%\changes{v3.1}{2008/08/28}{Converted to environment} -%\begin{macro}{\suppinfo} -%\changes{v3.1}{2008/08/28}{Converted to environment} -% Two macros are provided that will always give the correct -% output. +%\end{environment} +%\end{environment} +%\begin{macro}{\acknowledgementname} +%\begin{macro}{\bibsection} +%\begin{macro}{\suppinfoname} +% A few macros need to get around the changes. % \begin{macrocode} -\newcommand*{\acknowledgement}{% - \acs@subsection*{\acs@acknowledgement}} -\newcommand*{\suppinfo}{% - \acs@subsection*{\acs@suppinfo}} +\newcommand*{\acknowledgementname}{Acknowledgement} +\renewcommand*{\bibsection}{% + \acs@subsection*{\refname}% +} +\newcommand*{\suppinfoname}{Supporting Information Available} % \end{macrocode} %\end{macro} %\end{macro} -%\begin{macro}{\acs@acknowledgement} -%\begin{macro}{\acs@suppinfo} -% The text for the above is held separately. -% \begin{macrocode} -\newcommand*{\acs@acknowledgement}{Acknowledgement} -\newcommand*{\acs@suppinfo}{Supporting Information Available} -% \end{macrocode} -%\end{macro} %\end{macro} % -%\subsection{Removal of abstract} -%\begin{macro}{\acs@killabstract} -%\begin{macro}{\acs@startgobble} -%\begin{macro}{\acs@endgobble} -%\begin{macro}{\acs@iffalse} -% To disable the abstract, a modified copy of the code from -% \pkg{versions} is used. This code comes here so that the journal -% support files can call \cs{acs@killabstract} immediately. +%\begin{macro}{\acs@abstract} +%\begin{macro}{\acs@endabstract} +%\begin{macro}{\acs@abstract@start} +%\begin{macro}{\acs@abstract@end} +%\begin{macro}{\acs@abstract@iffalse} +% Removing the abstract, if necessary, is done using a trick from the +% \pkg{comment} package. However, it code is copied here to keep +% requirements down. % \begin{macrocode} -\newcommand*{\acs@killabstract}{% - \let\abstract\acs@startgobble} +\newcommand*{\acs@abstract}{} +\let\acs@abstract\abstract +\newcommand*{\acs@endabstract}{} +\let\acs@endabstract\endabstract \begingroup - \catcode`{=\active - \catcode`}=12\relax - \catcode`(=1\relax - \catcode`)=2\relax - \gdef\acs@startgobble(% - \ClassWarning(achemso) - (Abstract not allowed for this\MessageBreak - manuscript type)% + \catcode`{ \active + \catcode`} 12\relax + \catcode`( 1\relax + \catcode`) 2\relax + \gdef\acs@abstract@start(% + \acs@warning(% + Abstract not allowed for this\MessageBreak + manuscript type + )% \@bsphack - \catcode`{=\active - \catcode`}=12\relax + \catcode`{ \active + \catcode`} 12\relax \let\end\fi - \let{\acs@endgobble%} - \iffalse)%{ - \gdef\acs@endgobble#1}(% - \def\acs@tempa(#1)% - \ifx\acs@tempa\@currenvir + \let{\acs@abstract@end% } + \iffalse + )%{ + \gdef\acs@abstract@end#1}(% + \def\@tempa(#1)% + \ifx\@tempa\@currenvir \@Esphack\endgroup - \if@ignore - \global\@ignorefalse\ignorespaces - \fi - \else - \expandafter\acs@iffalse - \fi) + \if@ignore + \global\@ignorefalse + \ignorespaces + \fi + \else + \expandafter\acs@abstract@iffalse + \fi + ) \endgroup \newcommand*{\acs@iffalse}{\iffalse} % \end{macrocode} @@ -1665,1235 +2114,1040 @@ citations after punctuation. %\end{macro} %\end{macro} %\end{macro} -% -%\subsection{Loading appropriate support} -% If the package is being used with the class file, then the options -% \opt{journal} and \opt{type} are used to set up the correct -% settings. -% \begin{macrocode} -\@ifclassloaded{achemso} - {\@ifundefined{acs@journal} - {\ClassInfo{achemso}{No target journal specified: - \MessageBreak using package defaults}% -% \end{macrocode} -% The \opt{type} option only applies when a particular journal is -% given as an option. -% \begin{macrocode} - \@ifundefined{acs@manuscript}{} - {\ClassWarning{achemso}{The `type' option is only - applicable\MessageBreak when the `journal' option is - also specified}}}% - {\InputIfFileExists{\acs@journal.\acs@cfgextension} - {\ClassInfo{achemso}{Loading configuration for - journal\MessageBreak \acs@journal}} - {\ClassWarning{achemso}{Unknown journal - `\acs@journal'}% - \InputIfFileExists{jacsat.\acs@cfgextension} - {\ClassInfo{achemso}{Loading jacs - configuration\MessageBreak as a fall-back}} - {\ClassError{achemso}{Could not load - jacsat.cfg}{This is a core file of\MessageBreak - the achemso bundle: something is wrong with - \MessageBreak your installation}}}}}% -% \end{macrocode} -% If the class is not loaded, then an appropriate warning is given if -% either option is set. -% \begin{macrocode} - {\@ifundefined{acs@journal}{} - {\PackageWarning{achemso}{The `journal' option is only - applicable\MessageBreak when using the achemso - document class}}% - \@ifundefined{acs@manuscript}{} - {\PackageWarning{achemso}{The `type' option is only - applicable\MessageBreak when using the achemso - document class}}} -% \end{macrocode} -% -%\subsection{Patching \pkg{natbib}} -% As in REV\TeX, the package needs to modify \pkg{natbib} to move -% punctuation before superscript citations. First, \pkg{natbib} is -% loaded with the \opt{sort\&compress} option active. +%\end{macro} +%\begin{macro}{\AbstractOff} +%\begin{macro}{\AbstractOn} +% A very similar pattern to before. % \begin{macrocode} -\ifacs@super - \RequirePackage[sort&compress,numbers,super]{natbib} -\else - \RequirePackage[sort&compress,numbers,round]{natbib} -\fi -\RequirePackage{natmove} +\newcommand*{\AbstractOff}{% + \let\abstract\acs@abstract@start + \let\endabstract\acs@abstract@end +} +\@onlypreamble\AbstractOff +\newcommand*{\AbstractOn}{% + \let\abstract\acs@abstract + \let\endabstract\acs@endabstract +} +\@onlypreamble\AbstractOn % \end{macrocode} -%\begin{macro}{\nmv@activate} -%\begin{macro}{\nmv@natcitex} -%\begin{macro}{\nmv@cite} -%\begin{macro}{\cite} -% The \pkg{natmove} package is slightly patched to get automatic -% bibnotes. This is true for superscript and standard citations. +%\end{macro} +%\end{macro} +% +%\begin{macro}{\acs@toc@toks} +%\begin{macro}{\acs@toc@content} +%\begin{macro}{\acs@toc@content} +% The content of the graphic TOC entry is processed using a method from +% \pkg{amsmath} \emph{via} \pkg{environ}. The entire environment is +% gathered for typesetting in a box. First, some storage is needed. % \begin{macrocode} -\renewcommand*{\nmv@activate}{% - \let\nmv@natcitex\@citex - \let\@citex\nmv@citex - \let\nmv@cite\cite - \renewcommand*{\cite}[2][]{% - \nmv@ifmtarg{##1} - {\nmv@citetrue - \nmv@cite{##2}} - {\nocite{##2}% - \bibnote{Ref.~\citenum{##2}, ##1}}}} -\renewcommand*{\nmv@notactivate}{% - \let\nmv@cite\cite - \renewcommand*{\cite}[2][]{% - \nmv@ifmtarg{##1} - {\nmv@cite{##2}} - {\nocite{##2}% - \bibnote{Ref.~\citenum{##2}, ##1}}}} +\newtoks\acs@toc@toks +\newtoks\acs@toc@empty@toks +\newcommand*{\acs@toc@begins}{} +\newcommand*{\acs@toc@content}{} % \end{macrocode} %\end{macro} %\end{macro} %\end{macro} -%\end{macro} -% -%\subsection{General citation setup} -%\begin{macro}{\acs@bibstyle} -% The \currpkg package sets up the correct bibliography style. +%\begin{macro}{\acs@toc@collect} +%\begin{macro}{\acs@toc@collect@aux} +%\begin{macro}{\acs@toc@collect@begins} +%\begin{macro}{\acs@toc@collect@body} +% This is a \cs{long} version of \cs{collect@body}. % \begin{macrocode} -%\end{macro} -\ifacs@biochemistry - \newcommand*{\acs@bibstyle}{biochem} -\else - \newcommand*{\acs@bibstyle}{achemso} -\fi -\expandafter\bibliographystyle\expandafter{\acs@bibstyle} +\newcommand{\acs@toc@collect}[1]{% + \acs@toc@toks{% + \expandafter#1\expandafter{\the\acs@toc@toks}% + }% + \edef\acs@toc@content{% + \the\acs@toc@toks + \noexpand\end{\@currenvir}% + }% + \acs@toc@toks\acs@toc@empty@toks + \def\acs@toc@begins{b}% + \begingroup + \expandafter\let\csname\@currenvir\endcsname\acs@toc@collect@aux + \edef\acs@toc@content{% + \expandafter\noexpand\csname\@currenvir\endcsname + }% + \acs@toc@content +} +\newcommand*{\acs@toc@collect@aux}{} +\long\def\acs@toc@collect@aux#1\end#2{% + \edef\acs@toc@begins{% + \acs@toc@collect@begins#1\begin\end + \expandafter\@gobble\acs@toc@begins + }% + \ifx\@empty\acs@toc@begins + \endgroup + \@checkend{#2}% + \acs@toc@collect@body{#1}% + \else + \acs@toc@collect@body{#1\end{#2}}% + \fi + \acs@toc@content +} +\newcommand*{\acs@toc@collect@begins}{} +\long\def\acs@toc@collect@begins#1\begin#2{% + \ifx\end#2\else + b\expandafter\acs@toc@collect@begins + \fi +} +\newcommand{\acs@toc@collect@body}[1]{% + \global\acs@toc@toks\expandafter{\the\acs@toc@toks#1}% +} % \end{macrocode} +%\end{macro} %\end{macro} -%\begin{macro}{\bibliographystyle} -%\begin{macro}{\acs@bibliographystyle} -% If \pkg{chapterbib} is loaded, then multiple calls to -% \cs{bibliographystyle} need to be allowed. In either case, the -% argument is gobbled. +%\end{macro} +%\end{macro} +%\begin{macro}{\acs@toc@print} +% A simple macro to print the TOC contents. % \begin{macrocode} -\let\acs@bibliographystyle\bibliographystyle -\AtBeginDocument{ - \@ifpackageloaded{chapterbib} - {\renewcommand*{\bibliographystyle}[1]{% - \expandafter\acs@bibliographystyle\expandafter{% - \acs@bibstyle}}}} -\renewcommand*{\bibliographystyle}[1]{% - \PackageWarning{achemso}{\string\bibliographystyle\space - ignored}} +\newcommand{\acs@toc@print}[1]{% + \begin{center} + \fbox{% + \begin{minipage}{9cm} + \vbox to 3.5cm{#1}% + \end{minipage}% + }% + \end{center}% +} % \end{macrocode} %\end{macro} -%\end{macro} -%\begin{macro}{\citenumfont} -% For on-line citations, italic numbers are required. +%\begin{environment}{tocentry} +% Actually creating the entry is pretty easy. % \begin{macrocode} -\ifacs@super\else - \newcommand*{\citenumfont}{\textit} -\fi +\newenvironment{tocentry}{% + \if@twocolumn + \@restonecoltrue\onecolumn + \else + \@restonecolfalse\newpage + \fi + \acs@section*{\tocentryname}% + \tocsize + \sffamily + \singlespacing + \acs@toc@collect\acs@toc@print +}{% + \if@restonecol + \twocolumn + \else + \newpage + \fi +} % \end{macrocode} -%\end{macro} -% -%\subsection{Controlling \texorpdfstring{\BibTeX}{BibTeX}} -%\begin{macro}{\acs@msg} -%\begin{macro}{\acs@writebib} -%\begin{macro}{\acs@out} -%\begin{macro}{\acs@stream} -% \currpkg use the same system as \pkg{biblatex} and \pkg{IEEEtrans} -% to control output. A special database is generated, which contains -% the necessary control entries. +%\end{environment} +%\begin{macro}{\tocentryname} +% A simple name macro. % \begin{macrocode} -\edef\acs@msg{% - This is an auxiliary file used by the `achemso' package.^^J% - This file may safely be deleted. It will be recreated as - required.^^J} -\newcommand*{\acs@writebib}{% - \immediate\openout\acs@out\acs@stream\relax - \immediate\write\acs@out{\acs@msg}% +\newcommand*{\tocentryname}{Graphical TOC Entry} % \end{macrocode} -% A shortcut to producing the control sequences. +%\end{macro} +%\begin{macro}{\tocsize} +% The font size for printing the TOC entry. % \begin{macrocode} - \edef\acs@tempa##1##2{\space\space##1\space - =\space"##2",^^J}% - \immediate\write\acs@out{% - @Control\string{achemso-control,^^J% - \acs@tempa{ctrl-use-title}{\ifacs@usetitle - yes\else no\fi}% - \acs@tempa{ctrl-etal-number}{\acs@maxauthors}% - \string}^^J}} +\newcommand*{\tocsize}{% + \@setfontsize\tocsize\@viiipt\@ixpt +} % \end{macrocode} -% The writing system is designed to allow the class to re-write the -% control file if needed. +%\end{macro} +% +%\begin{macro}{\acs@type@list} +%\begin{macro}{\acs@type@default} +%\begin{macro}{\acs@type@check} +% Different journals allow different types of article. A list is set +% up here: different journals can then alter it. A check function +% is also provided along with a default. % \begin{macrocode} -\if@filesw - \newwrite\acs@out - \newcommand*\acs@stream{\acs@prefix\jobname.bib} - \acs@writebib - \AtBeginDocument{\immediate\closeout\acs@out} -\fi +\newcommand*{\acs@type@list}{article,communication,suppinfo} +\newcommand*{\acs@type@default}{article} +\newcommand*{\acs@type@check}{% + \@tempswafalse + \@for\@tempa:=\acs@type@list\do{% + \ifx\@tempa\acs@manuscript + \expandafter\@tempswatrue + \fi + }% + \if@tempswa\else + \acs@warning{% + Invalid manuscript type \acs@manuscript:\MessageBreak + changed to default type \acs@type@default + }% + \let\acs@manuscript\acs@type@default + \fi +} % \end{macrocode} %\end{macro} %\end{macro} %\end{macro} -%\end{macro} -%\begin{macro}{\bibliography} -%\begin{macro}{\acs@bibliography} -% The \cs{bibliography} macro is now patched to use the control -% database. +% +% Although \pkg{achemso} avoids too much formatting, the class file +% makes a few changes to keep life simple. The name of the +% bibliography should be ``Notes and References'' if any notes are +% added. % \begin{macrocode} -\AtBeginDocument{ - \let\acs@bibliography\bibliography - \renewcommand*{\bibliography}[1]{% - \acs@bibliography{\acs@prefix\jobname,#1}}} +\renewcommand*{\refname}{% + \ifnum\the\value{bibnote}>\z@\relax + Notes and + \fi + References% +} % \end{macrocode} -%\end{macro} -%\end{macro} -% The control citation is now added to the document. This needs to -% be after the beginning of the document. To avoid a \pkg{natbib} -% warning, this is done directly (without \cs{nocite}). +% +% With all of the standard settings done, the journal configuration can +% be loaded. % \begin{macrocode} -\g@addto@macro{\document}{% - \if@filesw - \immediate\write\@auxout{% - \string\citation\string{achemso-control\string}}% - \fi} -% \end{macrocode} -% -%\section{The configuration files} -% The configuration files for different journals are not very -% complex. Keeping everything separate simply helps with -% maintenance. The defaults are re-applied by the files so that any -% user options are over-written when using the class file. Several -% of the files are basically copies of \file{jacsat.cfg}. +\InputIfFileExists{\acs@journal.cfg}{}{% + \acs@warning{% + Unknown journal `\acs@journal':\MessageBreak + using default configuration JACSAT% + }% + \input{jacsat.cfg}% +} +% \end{macrocode} +% +%\begin{macro}{\thepage} +% Some changes that can always be applied if the manuscript type is +% appropriate: this saves some repetition in the configuration files. +% \begin{macrocode} +\acs@type@check +\def\@tempa{note} +\ifx\acs@manuscript\@tempa + \SectionsOff +\fi +\def\@tempa{review} +\ifx\acs@manuscript\@tempa + \SectionsOn + \SectionNumbersOn +\fi +\def\@tempa{suppinfo} +\ifx\acs@manuscript\@tempa + \setkeys{acs}{maxauthors = 0} + \renewcommand*{\thepage}{S\arabic{page}} +\fi +%</class> +% \end{macrocode} +%\end{macro} +% +%\subsection{Late package-only code} % -%\iffalse -%</package> -%<*jacsat> -%\fi -%\subsection{\emph{J.~Am.\ Chem.\ Soc.}} -% The \emph{J. Am. Chem. Soc.} is the basis of all of the configuration -% files. +% The \pkg{notes2bib} code may or may not be activated. % \begin{macrocode} -\ProvidesFile{jacsat.cfg} - [2009/02/03 v3.1a achemso configuration: - J. Am. Chem. Soc.] -\acs@setkeys{ - abbreviate=true, - biblabel=brackets, - biochem=false, - maxauthors=15, - super=true, - usetitle=false} -\acs@validtype{article,communication,suppinfo} +%<*package> +\AtBeginDocument{% + \@ifpackageloaded{notes2bib}{}{% + \acs@niib@create + }% +} +%</package> % \end{macrocode} -% For JACS Communications, a number of setting changes are made to -% match the published style. A lot of the float stuff is -% copied from \pkg{chemstyle}. +% +%\subsection{Moving citations with \pkg{natbib}} +% +% The code for moving citations is created as a separate package, as +% the code needed is the same in both cases. % \begin{macrocode} -\renewcommand*{\acs@tempa}{communication} -\ifx\acs@manuscript\acs@tempa +%<*natmove> +\ProvidesPackage{natmove} + [2009/04/20 v1.1 Automatic citation moving with natbib] +\RequirePackage{natbib} % \end{macrocode} -%\begin{macro}{\@xipt} -% The class loaded is 12 point and one column. So changes are needed -% to get two columns and 9 point text. +% +%\begin{macro}{\nmv@ifmtarg} +%\begin{macro}{\nmv@xifmtarg} +% To keep down dependence on other packages, the very short code block +% from \pkg{ifmtarg} is copied here with an internal name. % \begin{macrocode} - \@twocolumntrue - \col@number\tw@\relax - \def\@xipt{11} - \renewcommand{\normalsize}{% - \@setfontsize\normalsize\@ixpt\@xipt} - \normalsize +\newcommand*{\nmv@ifmtarg}{} +\newcommand*{\nmv@xifmtarg}{} +\begingroup + \catcode`\Q 3\relax + \long\gdef\nmv@ifmtarg#1{% + \nmv@xifmtarg#1QQ\@secondoftwo\@firstoftwo\@nil + } + \long\gdef\nmv@xifmtarg#1#2Q#3#4#5\@nil{#4} +\endgroup % \end{macrocode} %\end{macro} -%\begin{macro}{\titlesize} -%\begin{macro}{\authorsize} -%\begin{macro}{\affilsize} -%\begin{macro}{\emailsize} -%\begin{macro}{\capsize} -%\begin{macro}{\acksize} -%\begin{macro}{\suppsize} -%\begin{macro}{\refsize} -% To keep things logical, the size macros are given names related to -% their function. +%\end{macro} +%\begin{macro}{\ifnmv@cite} +% A flag is need to watch whether \cs{cite} or another macro is in use. % \begin{macrocode} - \newcommand*{\titlesize}{% - \@setfontsize\titlesize\@xiipt{13}} - \newcommand*{\authorsize}{% - \@setfontsize\authorsize{10.5}{12.5}} - \newcommand*{\affilsize}{% - \@setfontsize\affilsize\@ixpt\@xpt} - \newcommand*{\emailsize}{% - \@setfontsize\emailsize\@viiipt{15}} - \newcommand*{\capsize}{% - \@setfontsize\capsize\@viiipt\@ixpt} - \newcommand*{\acksize}{% - \@setfontsize\acksize\@ixpt\@xipt} - \newcommand*{\suppsize}{% - \@setfontsize\suppsize{8.5}{10.5}} - \newcommand*{\refsize}{% - \@setfontsize\refsize{7.5}{7.5}} - \let\footnotesize\refsize +\newif\ifnmv@cite % \end{macrocode} %\end{macro} +%\begin{macro}{\nmv@citex} +% Using the flag, either the new internal macro, or the \pkg{natbib} +% original, can be called. +% \begin{macrocode} +\newcommand*{\nmv@citex}{% + \ifnmv@cite + \expandafter\nmv@citex@moving + \else + \expandafter\nmv@citex@nat + \fi +} +% \end{macrocode} %\end{macro} -%\end{macro} -%\end{macro} -%\end{macro} -%\end{macro} -%\end{macro} -%\end{macro} -% The page geometry is set up, along with the various spacings around -% display content. +%\begin{macro}{\nmv@after} +% Later, the argument for \cs{cite} will need to be saved. % \begin{macrocode} - \geometry{letterpaper,top=12.7mm,bottom=16.8mm,left=19.3mm, - right=19.3mm,dvips} - \setlength{\columnsep}{8.1mm} - \setlength{\parindent}{3.3mm} - \abovedisplayskip 5\p@ \@plus2\p@ \@minus 5\p@ - \abovedisplayshortskip \z@ \@plus3\p@ - \belowdisplayshortskip 3\p@ \@plus3\p@ \@minus 3\p@ - \belowdisplayskip \abovedisplayskip - \abovecaptionskip 5\p@ - \intextsep 7\p@ \@plus 2\p@ \@minus 2\p@ - \let\@listi\@listI +\newcommand*{\nmv@after}{} % \end{macrocode} -% \TeX\ is given some extra play with the spacing, as narrow columns otherwise -% need a lot of hyphens. +%\end{macro} +%\begin{macro}{\nmv@citex@moving} +% The new version of \cs{@citex} is needed that looks ahead of the +% citation using \cs{futurelet}. There are three arguments to +% \cs{@citex} when using \pkg{natbib}. Other than that, the trick +% used here is similar to that in \pkg{cite}. % \begin{macrocode} - \tolerance=2000 - \emergencystretch=10pt +\newcommand*{\nmv@citex@moving}{} +\def\nmv@citex@moving[#1][#2]#3{% + \leavevmode + \skip@\lastskip + \unskip + \begingroup + \def\nmv@after{\nmv@citex@nat[#1][#2]{#3}}% + \global\nmv@citefalse + \nmv@citex@get@next\relax +} % \end{macrocode} -% Some adjustments are now made to the layout. +%\end{macro} +%\begin{macro}{\nmv@citex@end} +% To get things right at the end. % \begin{macrocode} - \acs@killabstract - \acs@killsecs - \AtBeginDocument{\singlespacing} +\newcommand*{\nmv@citex@end}{% + \nmv@after + \endgroup +} % \end{macrocode} -%\begin{macro}{\ps@plain} -%\begin{macro}{\ps@jacs} -% The header styles are again done the hard way, to keep down the -% number of packages loaded. +%\end{macro} +%\begin{macro}{\nmv@citex@get@next} +%\begin{macro}{\nmv@citex@next} +% The next token on the input stack is saved into +% \cs{nmv@citex@next}, after gobbling up one token. % \begin{macrocode} - \renewcommand*{\ps@plain}{% - \let\@mkboth\@gobbletwo - \let\@oddhead\@empty - \renewcommand*{\@oddfoot}{% - \reset@font\sffamily\textbf{\thepage}\hfil}% - \let\@evenhead\@empty - \let\@evenfoot\@oddfoot} - \newcommand*{\ps@jacs}{% - \renewcommand*{\@oddfoot}{% - \reset@font\sffamily\textbf{\thepage}\hfil}% - \renewcommand*{\@evenfoot}{% - \reset@font\hfil\sffamily\textbf{\thepage}}% - \renewcommand*{\@oddhead}{}% - \let\@evenhead\@oddhead} - \pagestyle{jacs} +\newcommand*{\nmv@citex@get@next}[1]{% + \futurelet\nmv@citex@next\nmv@citex@punct +} % \end{macrocode} %\end{macro} %\end{macro} -%\begin{macro}{\@maketitle} -% The title-making macro is completely re-written to force the desired -% spacing. +%\begin{macro}{\nmv@citex@punct} +%\begin{macro}{\nmv@citex@loop} +% The working macro for moving the punctuation. This is very much +% like \cs{@citey} in the \pkg{cite} package. The initial assumption +% is that the loop will terminate, and so the recursion call will +% simply do the finalisation. % \begin{macrocode} - \renewcommand*{\@maketitle}{% - \pagestyle{jacs}% - \ifnum\acs@authorcnt<\z@\relax - \ClassError{achemso}{No authors defined} - {At least one author is required}% +\newcommand*{\nmv@citex@punct}{% + \let\nmv@citex@loop\nmv@citex@end + \ifx\nmv@citex@next.\relax + \ifnum\spacefactor<\nmv@citex@sfac\else + \let\nmv@citex@next\relax + \let\nmv@citex@loop\nmv@citex@get@next \fi - \newpage - \null - {\titlesize - \vspace*{16mm}}% - \begin{center} - \begin{minipage}{152.4mm} - \begin{center} - {\titlesize\bfseries\sffamily - \@title \par}% - {\authorsize\sffamily\frenchspacing - \acs@authorlist\par}% - {\affilsize\itshape\acs@addresslist \par}% - {\emailsize\sffamily - Received \today; - E-mail: \acs@emaillist}% - \vspace{-1mm}% - \end{center} - \end{minipage} - \end{center}} + \fi + \expandafter\nmv@citex@punct@aux\natmovechars\@empty + \nmv@citex@loop +} +\newcommand*{\nmv@citex@loop}{} % \end{macrocode} %\end{macro} -% Getting the floats correct is a difficult task ``by hand''; using -% the \pkg{caption} package makes this a lot easier. +%\end{macro} +%\begin{macro}{\nmv@citex@pnct} +% The final part of the punctuation moving system. % \begin{macrocode} - \floatstyle{plaintop} - \restylefloat{scheme} - \floatstyle{plain} - \DeclareCaptionLabelSeparator{perquad}{.\quad} - \captionsetup{labelfont={bf,it,sf},textfont=sf, - labelsep=perquad} - \let\captionfont\capsize - \captionsetup[figure]{textfont=rm} - \captionsetup{singlelinecheck=off} +\newcommand*{\nmv@citex@punct@aux}{} +\def\nmv@citex@punct@aux#1#2\@empty{% + \ifx\nmv@citex@next#1\@empty + #1% + \let\nmv@citex@loop\nmv@citex@get@next + \fi + \ifx\@empty#2\@empty\else + \expandafter\nmv@citex@punct@aux#2\@empty + \fi +} % \end{macrocode} -% The text in tables should be smaller. +%\end{macro} +%\begin{macro}{\nmv@citex@sfac} +% The value of the spacing factor after a full stop is used to signal +% doubled punctuation. For French spacing, a bit of patching is +% needed. % \begin{macrocode} - \g@addto@macro{\table}{\capsize} +\mathchardef\nmv@citex@sfac3000\relax +\expandafter\def\expandafter\frenchspacing\expandafter{% + \frenchspacing + \mathchardef\nmv@citex@sfac1001\relax + \sfcode`\.\nmv@citex@sfac + \sfcode`\?\nmv@citex@sfac + \sfcode`\!\nmv@citex@sfac +} +\ifnum\sfcode`\.=\@m + \frenchspacing +\fi % \end{macrocode} -%\begin{environment}{acknowledgement} -%\begin{environment}{suppinfo} -% Supporting information and acknowledgements are turned into -% environments proper here; this allows control of text size. +%\end{macro} +%\begin{macro}{\nmv@citex@nat} +%\begin{macro}{\nmv@activate} +%\begin{macro}{\cite} +% The swap has to be done at the beginning of the document. The +% internal flag from \pkg{natbib} is used, but under the +% circumstances we should be safe. \cs{cite} is also patched to make +% the system active. % \begin{macrocode} - \renewenvironment{acknowledgement}{% - \renewcommand*{\acs@tempa}{acknowledgement}% - \ifx\@currenvir\acs@tempa - \let\par\relax - \acksize - \vspace{6pt}% - \textbf{\acs@acknowledgement.} - \else - \acs@subsection*{\acs@acknowledgement} - \fi}{\acs@par} - \renewenvironment{suppinfo}{% - \renewcommand*{\acs@tempa}{suppinfo}% - \ifx\@currenvir\acs@tempa - \let\par\relax - \suppsize - \vspace{6pt}% - \textbf{\acs@suppinfo:} - \else - \acs@subsection*{\acs@suppinfo} - \fi}{\acs@par} +\newcommand*{\nmv@citex@nat}{} +\newcommand*{\nmv@activate}{% + \let\nmv@citex@nat\@citex + \let\@citex\nmv@citex + \let\nmv@cite\cite + \renewcommand*{\cite}[2][]{% + \nmv@ifmtarg{##1}{% + \nmv@citetrue + \nmv@cite{##2}% + }{% + \nmv@citefalse + \nmv@cite[##1]{##2}}% + }% +} % \end{macrocode} -%\begin{macro}{\acs@par} -% The above needs a saved copy of \cs{par}. +%\end{macro} +%\end{macro} +%\end{macro} +%\begin{macro}{\nmv@natbib@detect} +% So that \pkg{natbib} options can be set without worrying about load +% order, \pkg{natmove} doesn't require \pkg{natbib}. So a test is needed +% to see if it is actually loaded. This is done as a macro so that the +% effect can be changed by \pkg{achemso}. % \begin{macrocode} - \let\acs@par\par +\newcommand*{\nmv@natbib@detect}{% + \@ifpackageloaded{natbib}{% + \ifNAT@super + \expandafter\nmv@activate + \fi + }{% + \PackageInfo{natmove}{% + The natbib package is not loaded.\MessageBreak + Loading natmove will do nothing + }% + }% +} +\AtBeginDocument{\nmv@natbib@detect} % \end{macrocode} %\end{macro} -% The bibliography has to be adjusted. +%\begin{macro}{\natmovechars} +% A user macro is needed for moving characters. % \begin{macrocode} - \AtBeginDocument{ - \renewcommand*{\bibsection}{% - \@startsection{section}{1} - {\z@}{\z@}{2.5mm}% - {\normalfont\acksize\bfseries} - {\hrule\nobreak - \vspace{1.2mm}\noindent\refname}} - \let\bibfont\refsize - \setlength{\bibhang}{0.61cm} - \setlength{\bibsep}{0mm}} -\fi +\newcommand*{\natmovechars}{.,;:} +%</natmove> % \end{macrocode} -%\end{environment} -%\end{environment} +%\end{macro} % +%\subsection{The configuration files} +% +% The configuration files for different journals are not very complex. +% Keeping everything separate simply helps with maintenance. Most of +% this code is very, very boring, and so it is not typeset. +% %\iffalse -%</jacsat> -%<*achre4> -%\fi -%\subsection{\emph{Acc.\ Chem.\ Res.}} % \begin{macrocode} +%<*achre4> \ProvidesFile{achre4.cfg} - [2009/02/03 v3.1a achemso configuration: - Acc. Chem. Res.] -\acs@setkeys{ - abbreviate=true, - biblabel=plain, - biochem=false, - maxauthors=15, - super=true, - usetitle=false} -\acs@validtype{article,suppinfo} + [2009/04/21 v3.2 achemso configuration: Acc. Chem. Res.] +\setkeys{acs}{ + biblabel = plain +} +\renewcommand*{\acs@type@list}{article,suppinfo} \renewcommand*{\abstractname}{Conspectus} -% \end{macrocode} -%\iffalse %</achre4> %<*acbcct> -%\fi -%\subsection{\emph{ACS Chem.\ Biol.}} -% \begin{macrocode} \ProvidesFile{acbcct.cfg} - [2009/02/03 v3.1a achemso configuration: - ACS Chem. Biol.] -\acs@setkeys{ - abbreviate=true, - biblabel=fullstop, - biochem=true, - maxauthors=15, - super=false, - usetitle=true} -\acs@validtype{article,letter,review,suppinfo} -% \end{macrocode} -%\iffalse + [2009/04/21 v3.2 achemso configuration: ACS Chem. Biol.] +\setkeys{acs}{ + biblabel = fullstop, + biochem = true, + super = false, + usetitle = true +} +\renewcommand*{\acs@type@list}{article,letter,review,suppinfo} +\SectionNumbersOff %</acbcct> %<*ancac3> -%\fi -%\subsection{\emph{ACS Nano}} -% \begin{macrocode} \ProvidesFile{acbcct.cfg} - [2009/02/03 v3.1a achemso configuration: - ACS Nano] -\acs@setkeys{ - abbreviate=true, - biblabel=fullstop, - biochem=false, - maxauthors=15, - super=true, - usetitle=true} -\acs@validtype{perspective,article,suppinfo} -% \end{macrocode} -%\iffalse + [2009/04/21 v3.2 achemso configuration: ACS Nano] +\setkeys{acs}{ + biblabel = fullstop, + usetitle = true +} +\renewcommand*{\acs@type@list}{article,perspective,suppinfo} +\SectionNumbersOff %</ancac3> %<*ancham> -%\fi -%\subsection{\emph{Anal.\ Chem.}} -% \begin{macrocode} \ProvidesFile{ancham.cfg} - [2009/02/03 v3.1a achemso configuration: - Anal. Chem.] -\acs@setkeys{ - abbreviate=true, - biblabel=brackets, - biochem=false, - maxauthors=15, - super=true, - usetitle=false} -\acs@validtype{article,suppinfo,note} -% \end{macrocode} -%\iffalse + [2009/04/21 v3.2 achemso configuration: Anal. Chem.] +\renewcommand*{\acs@type@list}{article,note,suppinfo} +\SectionNumbersOff %</ancham> %<*bichaw> -%\fi -%\subsection{\emph{Biochemistry}} -% \begin{macrocode} \ProvidesFile{biochem.cfg} - [2009/02/03 v3.1a achemso configuration: - Biochemistry] -\acs@setkeys{ - abbreviate=true, - biblabel=fullstop, - biochem=true, - maxauthors=15, - super=false, - usetitle=true} -\acs@validtype{article,communication,suppinfo} -% \end{macrocode} -%\iffalse + [2009/04/21 v3.2 achemso configuration: Biochemistry] +\setkeys{acs}{ + biblabel = fullstop, + biochem = true, + super = false, + usetitle = true +} +\SectionNumbersOff %</bichaw> %<*bcches> -%\fi -%\subsection{\emph{Bioconjugate Chem.}} -% \begin{macrocode} \ProvidesFile{bcches.cfg} - [2009/02/03 v3.1a achemso configuration: - Bioconjugate Chem.] -\acs@setkeys{ - abbreviate=true, - biblabel=brackets, - biochem=true, - maxauthors=15, - super=false, - usetitle=true} -\acs@validtype{article,communication,suppinfo} -% \end{macrocode} -%\iffalse + [2009/04/21 v3.2 achemso configuration: Bioconjugate Chem.] +\setkeys{acs}{ + biochem = true, + super = false, + usetitle = true +} +\SectionNumbersOff %</bcches> %<*bomaf6> -%\fi -%\subsection{\emph{Biomacromolecules}} -% \begin{macrocode} \ProvidesFile{bomaf6.cfg} - [2009/02/03 v3.1a achemso configuration: - Biomacromolecules] -\acs@setkeys{ - abbreviate=true, - biblabel=brackets, - biochem=false, - maxauthors=15, - super=false, - usetitle=true} -\acs@validtype{article,communication,suppinfo} -% \end{macrocode} -%\iffalse + [2009/04/21 v3.2 achemso configuration: Biomacromolecules] +\setkeys{acs}{ + super = false, + usetitle = true +} +\SectionNumbersOff %</bomaf6> %<*bipret> -%\fi -%\subsection{\emph{Biotechnol.\ Prog.}} -% \begin{macrocode} \ProvidesFile{bipret.cfg} - [2009/02/03 v3.1a achemso configuration: - Biotechnol. Prog.] -\acs@setkeys{ - abbreviate=true, - biblabel=brackets, - biochem=false, - maxauthors=15, - super=false, - usetitle=true} -\acs@validtype{article,review,suppinfo} -% \end{macrocode} -%\iffalse + [2009/04/21 v3.2 achemso configuration: Biotechnol. Prog.] +\setkeys{acs}{ + super = false, + usetitle = true +} +\renewcommand*{\acs@type@list}{article,review,suppinfo} +\SectionNumbersOff %</bipret> %<*crtoec> -%\fi -%\subsection{\emph{Chem.\ Res.\ Toxicol.}} -% \begin{macrocode} \ProvidesFile{crtoec.cfg} - [2009/02/03 v3.1a achemso configuration: - Chem. Res. Toxicol.] -\acs@setkeys{ - abbreviate=true, - biblabel=brackets, - biochem=true, - maxauthors=15, - super=false, - usetitle=true} -\acs@validtype{perspective,article,review,profile,suppinfo} -% \end{macrocode} -%\iffalse + [2009/04/21 v3.2 achemso configuration: Chem. Res. Toxicol.] +\setkeys{acs}{ + biochem = true, + super = false, + usetitle = true +} +\renewcommand*{\acs@type@list}{% + article,perspective,profile,review,suppinfo% +} +\SectionNumbersOff %</crtoec> %<*chreay> -%\fi -%\subsection{\emph{Chem.\ Rev.}} -% For \emph{Chem.\ Rev.}, the usual start. -% \begin{macrocode} \ProvidesFile{chreay.cfg} - [2009/02/03 v3.1a achemso configuration: - Chem. Rev.] -\acs@setkeys{ - abbreviate=true, - biblabel=brackets, - biochem=false, - maxauthors=0, - super=true, - usetitle=false} -\acs@validtype[review]{review} + [2009/04/21 v3.2 achemso configuration: Chem. Rev.] +\renewcommand*{\acs@type@default}{review} +\renewcommand*{\acs@type@list}{review} % \end{macrocode} -%\begin{macro}{\bibsection} -% Some changes are needed as the bibliography should be numbered. -% This is done with the \cs{bibsection} macro, as \pkg{natbib} sets -% this up rather than \cs{thebibliography}. +% The references section is numbered in \emph{Chem.\ Rev.} % \begin{macrocode} -\AtBeginDocument{ - \renewcommand*{\bibsection}{\section{\refname}}} -% \end{macrocode} -%\end{macro} -%\iffalse +\renewcommand*{\bibsection}{\acs@section{\refname}} %</chreay> %<*cmatex> -%\fi -%\subsection{\emph{Chem.\ Mater.}} % \begin{macrocode} \ProvidesFile{cmatex.cfg} - [2009/02/03 v3.1a achemso configuration: - Chem. Mater.] -\acs@setkeys{ - abbreviate=true, - biblabel=brackets, - biochem=false, - maxauthors=15, - super=true, - usetitle=false} -\acs@validtype{article,communication,suppinfo} -\renewcommand*{\acs@tempa}{communication} -\ifx\acs@manuscript\acs@tempa - \acs@killabstract - \acs@killsecs + [2009/04/21 v3.2 achemso configuration: Chem. Mater.] +\SectionNumbersOff +\def\@tempa{communication} +\ifx\acs@manuscript\@tempa + \AbstractOff + \SectionsOff \fi -% \end{macrocode} -%\iffalse %</cmatex> %<*cgdefu> -%\fi -%\subsection{\emph{Cryst.\ Growth Des.}} -% \begin{macrocode} \ProvidesFile{cgdefu.cfg} - [2009/02/03 v3.1a achemso configuration: - Cryst. Growth Des.] -\acs@setkeys{ - abbreviate=true, - biblabel=brackets, - biochem=false, - maxauthors=15, - super=true, - usetitle=false} -\acs@validtype{perspective,article,communication,suppinfo} -\renewcommand*{\acs@tempa}{communication} -\ifx\acs@manuscript\acs@tempa - \acs@killsecs + [2009/04/21 v3.2 achemso configuration: Cryst. Growth Des.] +\renewcommand*{\acs@type@list}{% + article,communication,perspective,suppinfo% +} +\SectionNumbersOff +\def\@tempa{communication} +\ifx\acs@manuscript\@tempa + \SectionsOff \fi -% \end{macrocode} -%\iffalse %</cgdefu> %<*enfuem> -%\fi -%\subsection{\emph{Energy Fuels}} -% \begin{macrocode} \ProvidesFile{enfuem.cfg} - [2009/02/03 v3.1a achemso configuration: - Energy Fuels] -\acs@setkeys{ - abbreviate=true, - biblabel=brackets, - biochem=false, - maxauthors=15, - super=true, - usetitle=false} -\acs@validtype{review,article,suppinfo} -% \end{macrocode} -%\iffalse + [2009/04/21 v3.2 achemso configuration: Energy Fuels] +\renewcommand*{\acs@type@list}{article,review,suppinfo} +\SectionNumbersOff %</enfuem> %<*esthag> -%\fi -%\subsection{\emph{Environ.\ Sci.\ Technol.}} -% \begin{macrocode} \ProvidesFile{esthag.cfg} - [2009/02/03 v3.1a achemso configuration: - Environ. Sci. Technol.] -\acs@setkeys{ - abbreviate=true, - biblabel=brackets, - biochem=false, - maxauthors=15, - super=false, - usetitle=true} -\acs@validtype{article,suppinfo} -% \end{macrocode} -%\iffalse + [2009/04/21 v3.2 achemso configuration: Environ. Sci. Technol.] +\setkeys{acs}{ + super = false, + usetitle = true +} +\renewcommand*{\acs@type@list}{article,suppinfo} +\SectionNumbersOff %</esthag> %<*iecred> -%\fi -%\subsection{\emph{Ind.\ Eng.\ Chem.\ Res.}} -% \begin{macrocode} \ProvidesFile{iecred.cfg} - [2009/02/03 v3.1a achemso configuration: - Ind. Eng. Chem. Res.] -\acs@setkeys{ - abbreviate=true, - biblabel=fullstop, - biochem=false, - maxauthors=15, - super=true, - usetitle=true} -\acs@validtype{article,communication,suppinfo} -\renewcommand*{\acs@tempa}{suppinfo} -\ifx\acs@manuscript\acs@tempa - \acs@setkeys{maxauthors=0} -\fi -% \end{macrocode} -%\iffalse + [2009/04/21 v3.2 achemso configuration: Ind. Eng. Chem. Res.] +\setkeys{acs}{ + biblabel = fullstop, + usetitle = true +} +\SectionNumbersOff %</iecred> %<*inoraj> -%\fi -%\subsection{\emph{Inorg.\ Chem.}} -% \begin{macrocode} \ProvidesFile{inoraj.cfg} - [2009/02/03 v3.1a achemso configuration: - Inorg. Chem.] -\acs@setkeys{ - abbreviate=true, - biblabel=brackets, - biochem=false, - maxauthors=15, - super=true, - usetitle=false} -\acs@validtype{article,communication,suppinfo} -\renewcommand*{\acs@tempa}{communication} -\ifx\acs@manuscript\acs@tempa - \acs@killabstract - \acs@killsecs + [2009/04/21 v3.2 achemso configuration: Inorg. Chem.] +\SectionNumbersOff +\def\@tempa{communication} +\ifx\acs@manuscript\@tempa + \AbstractOff + \SectionsOff \fi -% \end{macrocode} -%\iffalse %</inoraj> -%<*jafcau> +% \end{macrocode} %\fi -%\subsection{\emph{J.~Agric.\ Food Chem.}} +% +% The \emph{J.~Am.\ Chem.\ Soc.}~configuration is rather more +% complicated as there is the need to construct a ``galley-like'' +% layout for communications. % \begin{macrocode} -\ProvidesFile{jafcau.cfg} - [2009/02/03 v3.1a achemso configuration: - J. Agric. Food Chem.] -\acs@setkeys{ - abbreviate=true, - biblabel=brackets, - biochem=false, - maxauthors=15, - super=false, - usetitle=true} -\acs@validtype{article,suppinfo} +%<*jacsat> +\ProvidesFile{jacsat.cfg} + [2009/04/21 v3.2 achemso configuration: J. Am. Chem. Soc.] +\SectionNumbersOff +\def\@tempa{communication} +\ifx\acs@manuscript\@tempa\else + \expandafter\endinput +\fi % \end{macrocode} -%\iffalse +% Everything from here onward applies only to communications. Some +% adjustments are now made using the existing tools. +% \begin{macrocode} +\AbstractOff +\SectionsOff +\AtBeginDocument{\singlespacing} +% \end{macrocode} +%\begin{macro}{\@xipt} +% The class is already using 12 pt text, and the easiest way to change +% the size now is to define it by hand. +% \begin{macrocode} +\twocolumn +\renewcommand*{\@xipt}{11} +\renewcommand{\normalsize}{% + \@setfontsize\normalsize\@ixpt\@xipt +} +\normalsize +\let\@listi\@listI +% \end{macrocode} +%\end{macro} +% The page geometry is set up, along with the various spacings around +% display content. +% \begin{macrocode} +\geometry{ + letterpaper, + top = 12.7mm, + bottom = 16.8mm, + left = 19.3mm, + right = 19.3mm, + dvips +} +\setlength{\columnsep}{8.1mm} +\setlength{\parindent}{3.3mm} +\abovedisplayskip 5\p@ \@plus2\p@ \@minus 5\p@\relax +\abovedisplayshortskip \z@ \@plus3\p@\relax +\belowdisplayshortskip 3\p@ \@plus3\p@ \@minus 3\p@\relax +\belowdisplayskip\abovedisplayskip\relax +\abovecaptionskip 5\p@\relax +\intextsep 7\p@ \@plus 2\p@ \@minus 2\p@\relax +% \end{macrocode} +% \TeX\ is given some extra play with the spacing, as narrow columns +% otherwise need a lot of hyphens. +% \begin{macrocode} +\tolerance=2000\relax +\emergencystretch=10pt\relax +% \end{macrocode} +%\begin{macro}{\acksize} +%\begin{macro}{\affilsize} +%\begin{macro}{\authorsize} +%\begin{macro}{\emailsize} +%\begin{macro}{\capsize} +%\begin{macro}{\refsize} +%\begin{macro}{\suppsize} +%\begin{macro}{\titlesize} +% To keep things logical, the size macros are given names related to +% their function. +% \begin{macrocode} +\newcommand*{\affilsize}{% + \@setfontsize\affilsize\@ixpt\@xpt +} +\newcommand*{\acksize}{% + \@setfontsize\acksize\@ixpt\@xipt +} +\newcommand*{\authorsize}{% + \@setfontsize\authorsize{10.5}{12.5}% +} +\newcommand*{\capsize}{% + \@setfontsize\capsize\@viiipt\@ixpt +} +\newcommand*{\emailsize}{% + \@setfontsize\emailsize\@viiipt{15}% +} +\newcommand*{\refsize}{% + \@setfontsize\refsize{7.5}{7.5}% +} +\newcommand*{\suppsize}{% + \@setfontsize\suppsize{8.5}{10.5}% +} +\newcommand*{\titlesize}{% + \@setfontsize\titlesize\@xiipt{13}% +} +\let\footnotesize\refsize +\let\captionfont\capsize +% \end{macrocode} +%\end{macro} +%\end{macro} +%\end{macro} +%\end{macro} +%\end{macro} +%\end{macro} +%\end{macro} +%\end{macro} +%\begin{macro}{\ps@plain} +%\begin{macro}{\ps@jacs} +% The header styles are done the hard way, to keep down the number of +% packages loaded. +% \begin{macrocode} +\renewcommand*{\ps@plain}{% + \let\@mkboth\@gobbletwo + \let\@oddhead\@empty + \renewcommand*{\@oddfoot}{% + \reset@font + \sffamily + \textbf{\thepage}% + \hfil + }% + \let\@evenhead\@empty + \let\@evenfoot\@oddfoot +} +\newcommand*{\ps@jacs}{% + \renewcommand*{\@oddfoot}{% + \reset@font + \sffamily + \textbf{\thepage}% + \hfil + }% + \renewcommand*{\@evenfoot}{% + \reset@font + \hfil + \sffamily + \textbf{\thepage}% + }% + \renewcommand*{\@oddhead}{}% + \let\@evenhead\@oddhead +} +\pagestyle{jacs} +% \end{macrocode} +%\end{macro} +%\end{macro} +%\begin{macro}{\@maketitle} +% The title-making macro is completely re-written to force the desired +% spacing. +% \begin{macrocode} +\renewcommand*{\@maketitle}{% + \pagestyle{jacs}% + \ifnum\acs@author@cnt<\z@\relax + \acs@warning{No authors defined: At least one author is required}% + \fi + \newpage + \null + {% + \titlesize + \vspace*{16mm}% + }% + \begin{center} + \begin{minipage}{152.4mm} + \begin{center} + {% + \titlesize + \bfseries + \sffamily + \@title\par + }% + {% + \authorsize + \sffamily + \frenchspacing + \acs@author@list + \par + }% + {% + \affilsize + \itshape + \acs@address@list + \par + }% + {% + \emailsize + \sffamily + Received \today; + E-mail: \acs@email@list + }% + \vspace{-1mm}% + \end{center} + \end{minipage} + \end{center}% +} +% \end{macrocode} +%\end{macro} +% Getting the floats correct is a difficult task ``by hand''; using +% the \pkg{caption} package makes this a lot easier. +% \begin{macrocode} +\floatstyle{plaintop} +\restylefloat{scheme} +\floatstyle{plain} +\DeclareCaptionLabelSeparator{perquad}{.\quad} +\captionsetup{ + singlelinecheck = off, + labelfont = {bf,it,sf}, + textfont = sf, + labelsep = perquad +} +\captionsetup[figure]{textfont=rm} +% \end{macrocode} +%\begin{macro}{\acs@table} +%\begin{macro}{\table} +% A patch or \cs{table}. +% \begin{macrocode} +\newcommand*{\acs@table}{} +\let\acs@table\table +\renewcommand*{\table}{% + \capsize + \acs@table +} +% \end{macrocode} +%\end{macro} +%\end{macro} +%\begin{macro}{\acs@par} +%\begin{environment}{acknowledgement} +%\begin{environment}{suppinfo} +% Supporting information and acknowledgements are turned into +% environments proper here; this allows control of text size. +% \begin{macrocode} +\newcommand*{\acs@par}{} +\let\acs@par\par +\renewenvironment{acknowledgement}{% + \def\@tempa{acknowledgement}% + \ifx\@currenvir\@tempa + \let\par\relax + \acksize + \vspace{6pt}% + \textbf{\acknowledgementname} + \else + \acs@subsection*{\acknowledgementname} + \fi +}{% + \acs@par +} +\renewenvironment{suppinfo}{% + \def\@tempa{suppinfo}% + \ifx\@currenvir\@tempa + \let\par\relax + \suppsize + \vspace{6pt}% + \textbf{\suppinfoname:} + \else + \acs@subsection*{\suppinfoname} + \fi +}{% + \acs@par +} +% \end{macrocode} +%\end{environment} +%\end{environment} +%\end{macro} +% The bibliography has to be adjusted. +% \begin{macrocode} +\AtBeginDocument{ + \renewcommand*{\bibsection}{% + \@startsection + {section} + {1} + {\z@}{\z@}{2.5mm}% + {\normalfont\acksize\bfseries} + {\hrule\nobreak\vspace{1.2mm}\noindent\refname}% + }% + \let\bibfont\refsize + \setlength{\bibhang}{0.61cm}% + \setlength{\bibsep}{0mm}% +} +%</jacsat> +% \end{macrocode} +% +%\iffalse +% \begin{macrocode} +%<*jafcau> +\ProvidesFile{jafcau.cfg} + [2009/04/21 v3.2 achemso configuration: J. Agric. Food Chem.] +\setkeys{acs}{ + super = false, + usetitle = true +} +\renewcommand*{\acs@type@list}{article,suppinfo} +\SectionNumbersOff %</jafcau> %<*jceaax> -%\fi -%\subsection{\emph{J.~Chem.\ Eng. Data}} -% \begin{macrocode} \ProvidesFile{jceaax.cfg} - [2009/02/03 v3.1a achemso configuration: - J. Chem. Eng. Data] -\acs@setkeys{ - abbreviate=true, - biblabel=brackets, - biochem=false, - maxauthors=15, - super=true, - usetitle=true} -\acs@validtype{article,suppinfo} -% \end{macrocode} -%\iffalse + [2009/04/21 v3.2 achemso configuration: J. Chem. Eng. Data] +\setkeys{acs}{ + usetitle = true +} +\renewcommand*{\acs@type@list}{article,suppinfo} +\SectionNumbersOff %</jceaax> %<*jcisd8> -%\fi -%\subsection{\emph{J.~Chem.\ Inf.\ Model.}} -% \begin{macrocode} \ProvidesFile{jcisd8.cfg} - [2009/02/03 v3.1a achemso configuration: - J. Chem. Inf. Model.] -\acs@setkeys{ - abbreviate=true, - biblabel=brackets, - biochem=false, - maxauthors=15, - super=true, - usetitle=true} -\acs@validtype{article,suppinfo} -% \end{macrocode} -%\iffalse + [2009/04/21 v3.2 achemso configuration: J. Chem. Inf. Model.] +\setkeys{acs}{ + usetitle = true +} +\renewcommand*{\acs@type@list}{article,suppinfo} +\SectionNumbersOff %</jcisd8> %<*jctcce> -%\fi -%\subsection{\emph{J.~Chem.\ Theory Comput.}} -%\changes{v3.0a}{2008/08/21}{Added section numbers for -% \emph{J.~Chem.\ Theory Comput.}} -% \begin{macrocode} \ProvidesFile{jctcce.cfg} - [2009/02/03 v3.1a achemso configuration: - J. Chem. Theory Comput.] -\acs@setkeys{ - abbreviate=true, - biblabel=brackets, - biochem=false, - maxauthors=15, - super=true, - usetitle=false} -\acs@validtype{article,suppinfo} -\acs@restsecnums -% \end{macrocode} -%\iffalse + [2009/04/21 v3.2 achemso configuration: J. Chem. Theory Comput.] +\renewcommand*{\acs@type@list}{article,suppinfo} %</jctcce> %<*jcchff> -%\fi -%\subsection{\emph{J.~Comb.\ Chem.}} -% \begin{macrocode} \ProvidesFile{jcchff.cfg} - [2009/02/03 v3.1a achemso configuration: - J. Comb. Chem.] -\acs@setkeys{ - abbreviate=true, - biblabel=brackets, - biochem=false, - maxauthors=15, - super=true, - usetitle=false} -\acs@validtype{article,report,perspective,suppinfo} -% \end{macrocode} -%\iffalse + [2009/04/21 v3.2 achemso configuration: J. Comb. Chem.] +\renewcommand*{\acs@type@list}{article,report,perspective,suppinfo} +\SectionNumbersOff %</jcchff> %<*jmcmar> -%\fi -%\subsection{\emph{J.~Med.\ Chem.}} -% \begin{macrocode} \ProvidesFile{jmcmar.cfg} - [2009/02/03 v3.1a achemso configuration: - J. Med. Chem.] -\acs@setkeys{ - abbreviate=true, - biblabel=brackets, - biochem=false, - maxauthors=15, - super=true, - usetitle=true} -\acs@validtype{perspective,letter,article,suppinfo} -% \end{macrocode} -%\iffalse + [2009/04/21 v3.2 achemso configuration: J. Med. Chem.] +\setkeys{acs}{ + usetitle = true +} +\renewcommand*{\acs@type@list}{article,letter,perspective,suppinfo} +\SectionNumbersOff %</jmcmar> %<*jnprdf> -%\fi -%\subsection{\emph{J.~Nat.\ Prod.}} -% \begin{macrocode} \ProvidesFile{jnprdf.cfg} - [2009/02/03 v3.1a achemso configuration: - J. Nat. Prod.] -\acs@setkeys{ - abbreviate=true, - biblabel=brackets, - biochem=false, - maxauthors=15, - super=true, - usetitle=false} -\acs@validtype{article,communication,suppinfo} -\renewcommand*{\acs@tempa}{communication} -\ifx\acs@manuscript\acs@tempa - \acs@killabstract - \acs@killsecs + [2009/04/21 v3.2 achemso configuration: J. Nat. Prod.] +\def\@tempa{communication} +\ifx\acs@manuscript\@tempa + \AbstractOff + \SectionsOff \fi -% \end{macrocode} -%\iffalse %</jnprdf> %<*joceah> -%\fi -%\subsection{\emph{J.~Org.\ Chem.}} -% \begin{macrocode} \ProvidesFile{joceah.cfg} - [2009/02/03 v3.1a achemso configuration: - J. Org. Chem.] -\acs@setkeys{ - abbreviate=true, - biblabel=brackets, - biochem=false, - maxauthors=15, - super=true, - usetitle=false} -\acs@validtype{article,communication,suppinfo} -\renewcommand*{\acs@tempa}{communication} -\ifx\acs@manuscript\acs@tempa - \acs@killabstract - \acs@killsecs + [2009/04/21 v3.2 achemso configuration: J. Org. Chem.] +\def\@tempa{communication} +\ifx\acs@manuscript\@tempa + \AbstractOff + \SectionsOff \fi -% \end{macrocode} -%\iffalse %</joceah> %<*jpcafh> -%\fi -%\subsection{\emph{J.~Phys.\ Chem.~A}} -% \begin{macrocode} \ProvidesFile{jpcafh.cfg} - [2009/02/03 v3.1a achemso configuration: - J. Phys. Chem. A] -\acs@setkeys{ - abbreviate=true, - biblabel=brackets, - biochem=false, - maxauthors=15, - super=true, - usetitle=false} -\acs@validtype{letter,article,suppinfo} + [2009/04/21 v3.2 achemso configuration: J. Phys. Chem. A] +\renewcommand*{\acs@type@list}{article,letter,suppinfo} +\SectionNumbersOff +\captionsetup[table]{labelfont=bf,textfont=bf} % \end{macrocode} -%\iffalse +% Title +% \begin{macrocode} +\g@addto@macro{\maketitle}{\newpage} %</jpcafh> %<*jpcbfk> -%\fi -%\subsection{\emph{J.~Phys.\ Chem.~B}} -% \begin{macrocode} \ProvidesFile{jpcbfk.cfg} - [2009/02/03 v3.1a achemso configuration: - J. Phys. Chem. B] -\acs@setkeys{ - abbreviate=true, - biblabel=brackets, - biochem=false, - maxauthors=15, - super=true, - usetitle=false} -\acs@validtype{letter,article,suppinfo} -% \end{macrocode} -%\iffalse + [2009/04/21 v3.2 achemso configuration: J. Phys. Chem. B] +\renewcommand*{\acs@type@list}{article,letter,suppinfo} +\SectionNumbersOff +\captionsetup[table]{labelfont=bf,textfont=bf} +\g@addto@macro{\maketitle}{\newpage} %</jpcbfk> %<*jpccck> -%\fi -%\subsection{\emph{J.~Phys.\ Chem.~C}} -% \begin{macrocode} \ProvidesFile{jpccck.cfg} - [2009/02/03 v3.1a achemso configuration: - J. Phys. Chem. C] -\acs@setkeys{ - abbreviate=true, - biblabel=brackets, - biochem=false, - maxauthors=15, - super=true, - usetitle=false} -\acs@validtype{letter,article,suppinfo} -% \end{macrocode} -%\iffalse + [2009/04/21 v3.2 achemso configuration: J. Phys. Chem. C] +\renewcommand*{\acs@type@list}{article,letter,suppinfo} +\SectionNumbersOff +\captionsetup[table]{labelfont=bf,textfont=bf} +\g@addto@macro{\maketitle}{\newpage} %</jpccck> %<*jprobs> -%\fi -%\subsection{\emph{J.~Proteome Res.}} -% \begin{macrocode} \ProvidesFile{jprobs.cfg} - [2009/02/03 v3.1a achemso configuration: - J. Proteome Res.] -\acs@setkeys{ - abbreviate=true, - biblabel=brackets, - biochem=false, - maxauthors=15, - super=true, - usetitle=true} -\acs@validtype{review,article,suppinfo} -% \end{macrocode} -%\iffalse + [2009/04/21 v3.2 achemso configuration: J. Proteome Res.] +\setkeys{acs}{ + usetitle = true +} +\renewcommand*{\acs@type@list}{article,review,suppinfo} +\SectionNumbersOff %</jprobs> %<*langd5> -%\fi -%\subsection{\emph{Langmuir}} -% \begin{macrocode} \ProvidesFile{langd5.cfg} - [2009/02/03 v3.1a achemso configuration: - Langmuir] -\acs@setkeys{ - abbreviate=true, - biblabel=brackets, - biochem=false, - maxauthors=15, - super=true, - usetitle=false} -\acs@validtype{letter,article,suppinfo} -% \end{macrocode} -%\iffalse + [2009/04/21 v3.2 achemso configuration: Langmuir] +\renewcommand*{\acs@type@list}{article,letter,suppinfo} +\SectionNumbersOff %</langd5> %<*mamobx> -%\fi -%\subsection{\emph{Macromolecules}} -% \begin{macrocode} \ProvidesFile{mamobx.cfg} - [2009/02/03 v3.1a achemso configuration: - Macromolecules] -\acs@setkeys{ - abbreviate=true, - biblabel=brackets, - biochem=false, - maxauthors=15, - super=true, - usetitle=false} -\acs@validtype{communication,article,suppinfo} -% \end{macrocode} -%\iffalse + [2009/04/21 v3.2 achemso configuration: Macromolecules] +\SectionNumbersOff %</mamobx> %<*mpohbp> -%\fi -%\subsection{\emph{Mol.\ Pharm.}} -% \begin{macrocode} \ProvidesFile{mamobx.cfg} - [2009/02/03 v3.1a achemso configuration: - Mol. Pharm.] -\acs@setkeys{ - abbreviate=true, - biblabel=brackets, - biochem=false, - maxauthors=15, - super=true, - usetitle=true} -\acs@validtype{article,suppinfo} -% \end{macrocode} -%\iffalse + [2009/04/21 v3.2 achemso configuration: Mol. Pharm.] +\setkeys{acs}{ + usetitle = true +} +\renewcommand*{\acs@type@list}{article,suppinfo} +\SectionNumbersOff %</mpohbp> %<*nalefd> -%\fi -%\subsection{\emph{Nano Lett.}} -% \begin{macrocode} \ProvidesFile{nalefd.cfg} - [2009/02/03 v3.1a achemso configuration: - Nano Lett.] -\acs@setkeys{ - abbreviate=true, - biblabel=brackets, - biochem=false, - maxauthors=15, - super=true, - usetitle=false} -\acs@validtype[letter]{letter} -% \end{macrocode} -%\iffalse + [2009/04/21 v3.2 achemso configuration: Nano Lett.] +\renewcommand*{\acs@type@default}{letter} +\renewcommand*{\acs@type@list}{letter} +\SectionNumbersOff %</nalefd> %<*orlef7> -%\fi -%\subsection{\emph{Org.\ Lett.}} -% \begin{macrocode} \ProvidesFile{orlef7.cfg} - [2009/02/03 v3.1a achemso configuration: - Org. Lett.] -\acs@setkeys{ - abbreviate=true, - biblabel=brackets, - biochem=false, - maxauthors=15, - super=true, - usetitle=false} -\acs@validtype[letter]{letter} -% \end{macrocode} -%\iffalse + [2009/04/21 v3.2 achemso configuration: Org. Lett.] +\renewcommand*{\acs@type@default}{letter} +\renewcommand*{\acs@type@list}{letter} +\SectionNumbersOff %</orlef7> %<*oprdfk> -%\fi -%\subsection{\emph{Org.\ Proc.\ Res.\ Dev.}} -% \begin{macrocode} \ProvidesFile{oprdfk.cfg} - [2009/02/03 v3.1a achemso configuration: - Org. Proc. Res. Dev.] -\acs@setkeys{ - abbreviate=true, - biblabel=brackets, - biochem=false, - maxauthors=15, - super=true, - usetitle=false} -\acs@validtype{highlight,article,review,suppinfo} -% \end{macrocode} -%\iffalse + [2009/04/21 v3.2 achemso configuration: Org. Proc. Res. Dev.] +\renewcommand*{\acs@type@list}{article,highlight,review,suppinfo} +\SectionNumbersOff %</oprdfk> %<*orgnd7> -%\fi -%\subsection{\emph{Organometallics}} -% \begin{macrocode} \ProvidesFile{orgnd7.cfg} - [2009/02/03 v3.1a achemso configuration: - Organometallics] -\acs@setkeys{ - abbreviate=true, - biblabel=brackets, - biochem=false, - maxauthors=15, - super=true, - usetitle=false} -\acs@validtype{communication,article,suppinfo} -% \end{macrocode} -%\iffalse + [2009/04/21 v3.2 achemso configuration: Organometallics] +\SectionNumbersOff %</orgnd7> -%\fi -% +% \end{macrocode} +%\fi +% %\Finale +% %\iffalse -%<*refs> -@ARTICLE{Abernethy2003, - author = {Colin D. Abernethy and Gareth M. Codd and Mark D. Spicer - and Michelle K. Taylor}, - title = {{A} highly stable {N}-heterocyclic carbene complex of - trichloro-oxo-vanadium(\textsc{v}) displaying novel - {C}l---{C}(carbene) bonding interactions}, - journal = {{J}. {A}m. {C}hem. {S}oc.}, - year = {2003}, - volume = {125}, - pages = {1128--1129}, - number = {5}, - doi = {10.1021/ja0276321}, -} - -@MISC{ACS2007, - url = {http://pubs.acs.org/books/references.shtml}, -} - -@ARTICLE{Arduengo1992, - author = {Arduengo, III, Anthony J. and H. V. Rasika Dias and - Richard L. Harlow and Michael Kline}, - title = {{E}lectronic stabilization of nucleophilic carbenes}, - journal = {{J}.~{A}m.\ {C}hem.\ {S}oc.}, - year = {1992}, - volume = {114}, - pages = {5530--5534}, - number = {14}, - doi = {10.1021/ja00040a007}, -} - -@ARTICLE{Arduengo1994, - author = {Arduengo, III, Anthony J. and Siegfried F. Gamper and - Joseph C. Calabrese and Fredric Davidson}, - title = {{L}ow-coordinate carbene complexes of nickel(0) and - platinum(0)}, - journal = jacsat, - year = {1994}, - volume = {116}, - pages = {4391--4394}, - number = {10}, - doi = {10.1021/ja00089a029}, -} - -@ARTICLE{Eisenstein2005, - author = {Appelhans, Leah N. and Zuccaccia, Daniele and Kovacevic, - Anes and Chianese, Anthony R. and Miecznikowski, John R. and - Macchioni, Aleco and Clot, Eric and Eisenstein, Odile and - Crabtree, Robert H.}, - title = {{A}n anion-dependent switch in selectivity results from a - change of {C}---{H} activation mechanism in the reaction of an - imidazolium salt with \ce{IrH5(PPh3)2}}, - journal = {{J}.~{A}m.\ {C}hem. {S}oc.}, - year = {2005}, - volume = {127}, - pages = {16299--16311}, - number = {46}, - doi = {10.1021/ja055317j}, -} - -@BOOK{Coghill2006, - title = {{T}he {ACS} {S}tyle {G}uide}, - publisher = {{O}xford {U}niversity {P}ress, {I}nc. and - {T}he {A}merican {C}hemical {S}ociety}, - year = {2006}, - editor = {Coghill, Anne M. and Garson, Lorrin R.}, - address = {{N}ew {Y}ork}, - edition = {3}, - subtitle = {{E}ffective {C}ommunication of {S}cientific - {I}nformation}, -} - -@BOOK{Cotton1999, - title = {{A}dvanced {I}norganic {C}hemistry}, - publisher = {Wiley}, - year = {1999}, - author = {Cotton, Frank Albert and Wilkinson, Geoffrery and - Murillio, Carlos A. and Bochmann, Manfred}, - address = {Chichester}, - edition = {6}, -} - -@MANUAL{Pople2003, - title = {{G}aussian 03}, - author = {M.~J. Frisch and G.~W. Trucks and H.~B. Schlegel and G.~E. Scuseria - and M.~A. Robb and J.~R. Cheeseman and Montgomery and Jr. and J. - A. and T. Vreven and K.~N. Kudin and J.~C. Burant and J.~M. Millam - and S.~S. Iyengar and J. Tomasi and V. Barone and B. Mennucci and - M. Cossi and G. Scalmani and N. Rega and G.~A. Petersson and H. Nakatsuji - and M. Hada and M. Ehara and K. Toyota and R. Fukuda and J. Hasegawa - and M. Ishida and T. Nakajima and Y. Honda and O. Kitao and H. Nakai - and M. Klene and X. Li and J.~E. Knox and H.~P. Hratchian and J.~B. - Cross and V. Bakken and C. Adamo and J. Jaramillo and R. Gomperts - and R.~E. Stratmann and O. Yazyev and A.~J. Austin and R. Cammi and - C. Pomelli and J.~W. Ochterski and P.~Y. Ayala and K. Morokuma and - G.~A. Voth and P. Salvador and J.~J. Dannenberg and V.~G. Zakrzewski - and S. Dapprich and A.~D. Daniels and M.~C. Strain and O. Farkas - and D.~K. Malick and A.~D. Rabuck and K. Raghavachari and J.~B. Foresman - and J.~V. Ortiz and Q. Cui and A.~G. Baboul and S. Clifford and J. - Cioslowski and B.~B. Stefanov and G. Liu and A. Liashenko and P. - Piskorz and I. Komaromi and R.~L. Martin and D.~J. Fox and T. Keith - and M.~A. Al-Laham and C.~Y. Peng and A. Nanayakkara and M. Challacombe - and P.~M.~W. Gill and B. Johnson and W. Chen and M.~W. Wong and C. - Gonzalez and J.~A. Pople}, - organization = {Gaussian, Inc.}, - address = {Wallingford, CT}, - year = {2004}, - howpublished = {Gaussian, Inc., Wallingford, CT, USA}, - institution = {Gaussian, Inc.}, - publisher = {Gaussian, Inc.} -} - -@ARTICLE{Mena2000, - author = {Angel Abarca and Pilar G\'omez-Sal and Avelino Mart\'in - and Miguel Mena and Josep Mar\'ia Poblet and Carlos Y\'elamos}, - title = {{A}mmonolysis of mono(pentamethylcyclopentadienyl) - titanium(\textsc{iv}) derivatives}, - journal = {Inorg. Chem.}, - year = {2000}, - volume = {39}, - pages = {642--651}, - number = {4}, - doi = {10.1021/ic9907718}, -} -%</refs> %<*demo> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% This is a (brief) model paper using the achemso class %% The document class accepts keyval options, which should include -%% the target journal and optionally the macuscript type. +%% the target journal and optionally the manuscript type. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% \documentclass[journal=jacsat,manuscript=article]{achemso} @@ -2961,10 +3215,8 @@ Germany} %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% The document title should be given as usual -%% A short title can be given as a *suggestion* for running headers. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -\title[\texttt{achemso} demonstration] -{A demonstration of the \textsf{achemso} \LaTeX\ class} +\title{A demonstration of the \textsf{achemso} \LaTeX\ class} \begin{document} %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% @@ -2983,8 +3235,8 @@ Germany} This is an abstract for the \textsf{achemso} document class demonstration document. An abstract is only allowed for certain manuscript types. The selection of \texttt{journal} and - \texttt{type} will determine if an abstract is valid. If not, the - class will issue an appropriate error. + \texttt{manuscript} will determine if an abstract is valid. If + not, the class will issue an appropriate error. \end{abstract} %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% @@ -3027,6 +3279,9 @@ Multiple citations to be combined into a list can be given as a single citation. This uses the \textsf{mciteplus} package \cite{Arduengo1992,*Eisenstein2005,*Arduengo1994}. Citations other than the first of the list should be indicated with a star. +If the \textsf{mciteplus} package is not installed, the standard +bibliography tools will still work but starred references will be +ignored. The class also handles notes to be added to the bibliography. These should be given in place in the document \bibnote{This is a note. @@ -3209,6 +3464,33 @@ package files. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% \bibliography{achemso} +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% The "tocentry" environment can be used to create an entry for the +%% graphical table of contents. +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% + +\begin{tocentry} + +Some journals require a graphical entry for the Table of Contents. +This should be laid out ``print ready'' so that the sizing of the +text is correct. + +Inside the \texttt{tocentry} environment, the font used is Helvetica +8\,pt, as required by \emph{Journal of the American Chemical +Society}. + +The surrounding frame is 9\,cm by 3.5\,cm, which is the maximum +permitted for \emph{Journal of the American Chemical Society} +graphical table of content entries. The box will not resize if the +content is too big: instead it will overflow the edge of the box. + +This box and the associated title will always be printed on a +separate page from the rest of the document. It is best to place the +graphical TOC entry as the last item in the draft so that the page +break is not a problem. + +\end{tocentry} + \end{document} %</demo> %<*bst> @@ -4701,21 +4983,34 @@ FUNCTION {begin.bib} 'skip$ { preamble$ write$ newline$ } if$ - "\ifx\mcitethebibliography\mciteundefinedmacro" + "\providecommand*{\mcitethebibliography}{\thebibliography}" write$ newline$ - "\PackageError" - write$ -%<!bio> "{achemso.bst}" -%<bio> "{biochem.bst}" - write$ - "{mciteplus.sty has not been loaded}" + "\csname @ifundefined\endcsname{endmcitethebibliography}" write$ newline$ - "{This bibstyle requires the use of the mciteplus package.}\fi" + "{\let\endmcitethebibliography\endthebibliography}{}" write$ newline$ "\begin{mcitethebibliography}{" number.label int.to.str$ * "}" * write$ newline$ "\providecommand*{\natexlab}[1]{#1}" write$ newline$ + "\providecommand*{\mciteSetBstSublistMode}[1]{}" + write$ newline$ + "\providecommand*{\mciteSetBstMaxWidthForm}[2]{}" + write$ newline$ + "\providecommand*{\mciteBstWouldAddEndPuncttrue}" + write$ newline$ + " {\def\EndOfBibitem{\unskip.}}" + write$ newline$ + "\providecommand*{\mciteBstWouldAddEndPunctfalse}" + write$ newline$ + " {\let\EndOfBibitem\relax}" + write$ newline$ + "\providecommand*{\mciteSetBstMidEndSepPunct}[3]{}" + write$ newline$ + "\providecommand*{\mciteSetBstSublistLabelBeginEnd}[3]{}" + write$ newline$ + "\providecommand*{\EndOfBibitem}{}" + write$ newline$ "\mciteSetBstSublistMode{f}" write$ newline$ "\mciteSetBstMaxWidthForm{subitem}{(\alph{mcitesubitemcount})}" @@ -4739,180 +5034,129 @@ FUNCTION {end.bib} EXECUTE {end.bib} %</bst> -%<*jawltxdoc> -\NeedsTeXFormat{LaTeX2e} -\ProvidesPackage{jawltxdoc} -\usepackage[T1]{fontenc} -\usepackage{lmodern} -\usepackage[final]{listings,graphicx,microtype} -\usepackage[scaled=0.95]{helvet} -\usepackage[version=3]{mhchem} -\usepackage[osf]{mathpazo} -\usepackage{booktabs,array,url,courier,xspace,varioref} -\usepackage{upgreek,ifpdf,float,caption,longtable,babel} -\begingroup - \@ifundefined{eTeXversion} - {\aftergroup\@gobble} - {\aftergroup\@firstofone} -\endgroup - {\usepackage{etoolbox}} -\floatstyle{plaintop} -\restylefloat{table} -\labelformat{figure}{\figurename~#1} -\labelformat{table}{\tablename~#1} -\ifpdf - \usepackage{embedfile} - \embedfile[% - stringmethod=escape,% - mimetype=plain/text,% - desc={LaTeX docstrip source archive for package `\jobname'}% - ]{\jobname.dtx} -\fi -\IfFileExists{\jobname.sty} - {\usepackage{\jobname}}{} -\usepackage[numbered]{hypdoc} -\setcounter{IndexColumns}{2} -\newlength\LaTeXwidth -\newlength\LaTeXoutdent -\newlength\LaTeXgap -\setlength\LaTeXgap{1em} -\setlength\LaTeXoutdent{-0.15\textwidth} -\newbox\lst@samplebox -\edef\LaTeXexamplefile{\jobname.tmp} -\lst@RequireAspects{writefile} -\lstnewenvironment{LaTeXexample}[1][example]{% - \global\let\lst@intname\@empty - \ifcsname LaTeXcode#1\endcsname - \expandafter\let\expandafter\LaTeXcode - \csname LaTeXcode#1\endcsname - \expandafter\let\expandafter\LaTeXcodeend - \csname LaTeXcode#1end\endcsname - \else - \PackageError{jawltxdoc} - {Undefined example type `#1'} - \@ehd - \let\LaTeXcode\relax - \let\LaTeXcodeend\relax - \fi - \LaTeXcode} - {\lst@EndWriteFile - \LaTeXcodeend} -\newcommand*{\LaTeXcodeexample}{% - \setbox\lst@samplebox=\hbox\bgroup - \LaTeXcodefloat} -\let\LaTeXcoderesultonly\LaTeXcodeexample -\newcommand*{\LaTeXcodeexampleend}{% - \egroup - \setlength\LaTeXwidth{\wd\lst@samplebox}% - \begin{list}{}{% - \setlength\itemindent{0pt} - \setlength\leftmargin\LaTeXoutdent - \setlength\rightmargin{0pt}}% - \item - \setlength\LaTeXoutdent{-0.15\textwidth} - \begin{minipage}[c]{% - \textwidth-\LaTeXwidth-\LaTeXoutdent-\LaTeXgap} - \LaTeXcodefloatend - \end{minipage}% - \hfill - \begin{minipage}[c]{\LaTeXwidth}% - \hbox to\linewidth{\box\lst@samplebox\hss}% - \end{minipage}% - \end{list}} -\newcommand*{\LaTeXcodefloat}{% - \setkeys{lst}{tabsize=4,gobble=3,breakindent=0pt, - basicstyle=\small\ttfamily,basewidth=0.51em, - keywordstyle=\color{blue}}% - \lst@BeginAlsoWriteFile{\LaTeXexamplefile}} -\let\LaTeXcodenoexample\LaTeXcodefloat -\let\LaTeXcodenoexampleend\@empty -\newcommand*{\LaTeXcodefloatend}{% - \MakePercentComment\catcode`\^^M=10\relax - \small - {\setkeys{lst}{SelectCharTable=\lst@ReplaceInput{\^\^I}% - {\lst@ProcessTabulator}}% - \leavevmode \input{\LaTeXexamplefile}}% - \MakePercentIgnore} -\newcommand*{\LaTeXcoderesultonlyend}{\egroup\LaTeXcodefloatend} -\lstnewenvironment{BibTeXexample}{% - \global\let\lst@intname\@empty - \setbox\lst@samplebox=\hbox\bgroup - \setkeys{lst}{tabsize=4,gobble=3,breakindent=0pt, - basicstyle=\small\ttfamily,basewidth=0.51em, - keywordstyle=\color{black}} - \lst@BeginAlsoWriteFile{\LaTeXexamplefile}} - {\lst@EndWriteFile - \LaTeXcodeexampleend} -\newcommand*{\DescribeOption}{% - \leavevmode\@bsphack\begingroup\MakePrivateLetters - \Describe@Option} -\newcommand*{\Describe@Option}[1]{\endgroup - \marginpar{\raggedleft\PrintDescribeEnv{#1}}% - \SpecialOptionIndex{#1}\@esphack\ignorespaces} -\newcommand*{\SpecialOptionIndex}[1]{\@bsphack - \index{#1\actualchar{\protect\ttfamily#1} - (option)\encapchar usage}% - \index{options:\levelchar#1\actualchar{\protect\ttfamily#1}% - \encapchar usage}\@esphack} -\newcommand*{\indexopt}[1]{\DescribeOption{#1}\opt{#1}} -\newcommand*{\DescribeOptionInfo}[2]{% - \DescribeOption{#1}% - \opt{#1=\meta{#2}}\xspace} -\newcommand*{\ofixarg}[1]{% - {\ttfamily[}% - \ifmmode \expandafter \nfss@text \fi - {% - \meta@font@select - \edef\meta@hyphen@restore{% - \hyphenchar\the\font\the\hyphenchar\font}% - \hyphenchar\font\m@ne - \language\l@nohyphenation - #1\/% - \meta@hyphen@restore - }% - {\ttfamily]}} -\newcommand*{\pkg}[1]{\textsf{#1}} -\newcommand*{\currpkg}{\pkg{\jobname}\xspace} -\newcommand*{\opt}[1]{\texttt{#1}} -\newcommand*{\defaultopt}[1]{\opt{\textbf{#1}}} -\newcommand*{\file}[1]{\texttt{#1}} -\newcommand*{\ext}[1]{\file{.#1}} -\newcommand*{\latin}[1]{\emph{#1}} -\newcommand*{\etc}{% - \@ifnextchar. - {\latin{etc}} - {\latin{etc}.\xspace}} -\newcommand*{\eg}{% - \@ifnextchar. - {\latin{e.g}} - {\latin{e.g}.\xspace}} -\newcommand*{\ie}{% - \@ifnextchar. - {\latin{i.e}} - {\latin{i.e}.\xspace}} -\newcommand*{\etal}{% - \@ifnextchar. - {\latin{et~al.}} - {\latin{et~al}.\xspace}} -\newcommand*{\AMS}{{\protect\usefont{OMS}{cmsy}{m}{n}% - A\kern-.1667em\lower.5ex\hbox{M}\kern-.125emS}} -\providecommand*{\eTeX}{\ensuremath{\varepsilon}-\TeX} -\DeclareRobustCommand*{\XeTeX} - {X\kern-.125em\lower.5ex\hbox{\reflectbox{E}}\kern-.1667em\TeX} -\providecommand*{\CTAN}{\textsc{ctan}} -\@ifpackageloaded{etoolbox} - {\patchcmd{\@addmarginpar} - {\@latex@warning@no@line {Marginpar on page \thepage\space moved}} - {\relax}{}{}} - {} -\newcounter{argument} -\g@addto@macro\endmacro{\setcounter{argument}{0}} -\newcommand*\darg[1]{% - \stepcounter{argument}% - {\ttfamily\char`\#\theargument~:~}#1\par\noindent\ignorespaces} -\newcommand*\doarg[1]{% - \stepcounter{argument}% - {\ttfamily\makebox[0pt][r]{[}% - \char`\#\theargument]:~}#1\par\noindent\ignorespaces} -%</jawltxdoc> -%\fi +%<*bib> +@ARTICLE{Abernethy2003, + author = {Colin D. Abernethy and Gareth M. Codd and Mark D. Spicer + and Michelle K. Taylor}, + title = {{A} highly stable {N}-heterocyclic carbene complex of + trichloro-oxo-vanadium(\textsc{v}) displaying novel + {C}l---{C}(carbene) bonding interactions}, + journal = {{J}. {A}m. {C}hem. {S}oc.}, + year = {2003}, + volume = {125}, + pages = {1128--1129}, + number = {5}, + doi = {10.1021/ja0276321}, +} + +@MISC{ACS2007, + url = {http://pubs.acs.org/books/references.shtml}, +} + +@ARTICLE{Arduengo1992, + author = {Arduengo, III, Anthony J. and H. V. Rasika Dias and + Richard L. Harlow and Michael Kline}, + title = {{E}lectronic stabilization of nucleophilic carbenes}, + journal = {{J}.~{A}m.\ {C}hem.\ {S}oc.}, + year = {1992}, + volume = {114}, + pages = {5530--5534}, + number = {14}, + doi = {10.1021/ja00040a007}, +} + +@ARTICLE{Arduengo1994, + author = {Arduengo, III, Anthony J. and Siegfried F. Gamper and + Joseph C. Calabrese and Fredric Davidson}, + title = {{L}ow-coordinate carbene complexes of nickel(0) and + platinum(0)}, + journal = jacsat, + year = {1994}, + volume = {116}, + pages = {4391--4394}, + number = {10}, + doi = {10.1021/ja00089a029}, +} + +@ARTICLE{Eisenstein2005, + author = {Appelhans, Leah N. and Zuccaccia, Daniele and Kovacevic, + Anes and Chianese, Anthony R. and Miecznikowski, John R. and + Macchioni, Aleco and Clot, Eric and Eisenstein, Odile and + Crabtree, Robert H.}, + title = {{A}n anion-dependent switch in selectivity results from a + change of {C}---{H} activation mechanism in the reaction of an + imidazolium salt with \ce{IrH5(PPh3)2}}, + journal = {{J}.~{A}m.\ {C}hem. {S}oc.}, + year = {2005}, + volume = {127}, + pages = {16299--16311}, + number = {46}, + doi = {10.1021/ja055317j}, +} + +@BOOK{Coghill2006, + title = {{T}he {ACS} {S}tyle {G}uide}, + publisher = {{O}xford {U}niversity {P}ress, {I}nc. and + {T}he {A}merican {C}hemical {S}ociety}, + year = {2006}, + editor = {Coghill, Anne M. and Garson, Lorrin R.}, + address = {{N}ew {Y}ork}, + edition = {3}, + subtitle = {{E}ffective {C}ommunication of {S}cientific + {I}nformation}, +} + +@BOOK{Cotton1999, + title = {{A}dvanced {I}norganic {C}hemistry}, + publisher = {Wiley}, + year = {1999}, + author = {Cotton, Frank Albert and Wilkinson, Geoffrery and + Murillio, Carlos A. and Bochmann, Manfred}, + address = {Chichester}, + edition = {6}, +} + +@MANUAL{Pople2003, + title = {{G}aussian 03}, + author = {M.~J. Frisch and G.~W. Trucks and H.~B. Schlegel and G.~E. Scuseria + and M.~A. Robb and J.~R. Cheeseman and Montgomery and Jr. and J. + A. and T. Vreven and K.~N. Kudin and J.~C. Burant and J.~M. Millam + and S.~S. Iyengar and J. Tomasi and V. Barone and B. Mennucci and + M. Cossi and G. Scalmani and N. Rega and G.~A. Petersson and H. Nakatsuji + and M. Hada and M. Ehara and K. Toyota and R. Fukuda and J. Hasegawa + and M. Ishida and T. Nakajima and Y. Honda and O. Kitao and H. Nakai + and M. Klene and X. Li and J.~E. Knox and H.~P. Hratchian and J.~B. + Cross and V. Bakken and C. Adamo and J. Jaramillo and R. Gomperts + and R.~E. Stratmann and O. Yazyev and A.~J. Austin and R. Cammi and + C. Pomelli and J.~W. Ochterski and P.~Y. Ayala and K. Morokuma and + G.~A. Voth and P. Salvador and J.~J. Dannenberg and V.~G. Zakrzewski + and S. Dapprich and A.~D. Daniels and M.~C. Strain and O. Farkas + and D.~K. Malick and A.~D. Rabuck and K. Raghavachari and J.~B. Foresman + and J.~V. Ortiz and Q. Cui and A.~G. Baboul and S. Clifford and J. + Cioslowski and B.~B. Stefanov and G. Liu and A. Liashenko and P. + Piskorz and I. Komaromi and R.~L. Martin and D.~J. Fox and T. Keith + and M.~A. Al-Laham and C.~Y. Peng and A. Nanayakkara and M. Challacombe + and P.~M.~W. Gill and B. Johnson and W. Chen and M.~W. Wong and C. + Gonzalez and J.~A. Pople}, + organization = {Gaussian, Inc.}, + address = {Wallingford, CT}, + year = {2004}, + howpublished = {Gaussian, Inc., Wallingford, CT, USA}, + institution = {Gaussian, Inc.}, + publisher = {Gaussian, Inc.} +} + +@ARTICLE{Mena2000, + author = {Angel Abarca and Pilar G\'omez-Sal and Avelino Mart\'in + and Miguel Mena and Josep Mar\'ia Poblet and Carlos Y\'elamos}, + title = {{A}mmonolysis of mono(pentamethylcyclopentadienyl) + titanium(\textsc{iv}) derivatives}, + journal = {Inorg. Chem.}, + year = {2000}, + volume = {39}, + pages = {642--651}, + number = {4}, + doi = {10.1021/ic9907718}, +} +%</bib> +%\fi
\ No newline at end of file diff --git a/Master/texmf-dist/source/latex/achemso/achemso.ins b/Master/texmf-dist/source/latex/achemso/achemso.ins index ae90f20035d..a66f0f9be97 100644 --- a/Master/texmf-dist/source/latex/achemso/achemso.ins +++ b/Master/texmf-dist/source/latex/achemso/achemso.ins @@ -5,39 +5,66 @@ %% The original source files were:
%%
%% achemso.dtx (with options: `install')
-%% ----------------------------------------------------------------
-%% achemso --- Support for submissions to American Chemical
-%% Society journals
-%% Maintained by Joseph Wright
-%% E-mail: joseph.wright@morningstar2.co.uk
-%% Released under the LaTeX Project Public License v1.3c or later
-%% See http://www.latex-project.org/lppl.txt
-%% ----------------------------------------------------------------
+%% ----------------------------------------------------------------
+%% achemso --- Support for submissions to American Chemical Society
+%% journals
+%% E-mail: joseph.wright@morningstar2.co.uk
+%% Released under the LaTeX Project Public License v1.3c or later
+%% See http://www.latex-project.org/lppl.txt
+%% ----------------------------------------------------------------
%%
\input docstrip.tex
\keepsilent
\askforoverwritefalse
\preamble
- ----------------------------------------------------------------
- achemso --- Support for submissions to American Chemical
- Society journals
- Maintained by Joseph Wright
- E-mail: joseph.wright@morningstar2.co.uk
- Released under the LaTeX Project Public License v1.3c or later
- See http://www.latex-project.org/lppl.txt
- ----------------------------------------------------------------
+----------------------------------------------------------------
+achemso --- Support for submissions to American Chemical Society
+ journals
+E-mail: joseph.wright@morningstar2.co.uk
+Released under the LaTeX Project Public License v1.3c or later
+See http://www.latex-project.org/lppl.txt
+----------------------------------------------------------------
\endpreamble
-\Msg{Generating achemso files:}
-\generate{\file{jawltxdoc.sty}{\from{\jobname.dtx}{jawltxdoc}}
-}
+\postamble
+
+Originally developed by Mats Dahlgren
+Copyright (C) 1996-1998 by Mats Dahlgren
+Copyright (C) 2008-2009 by
+ Joseph Wright <joseph.wright@morningstar2.co.uk>
+
+Part of this bundle is derived from cite.sty, to which the
+following license applies:
+ Copyright (C) 1989-2003 by Donald Arseneau
+ These macros may be freely transmitted, reproduced, or
+ modified provided that this notice is left intact.
+
+It may be distributed and/or modified under the conditions of
+the LaTeX Project Public License (LPPL), either version 1.3c of
+this license or (at your option) any later version. The latest
+version of this license is in the file:
+
+ http://www.latex-project.org/lppl.txt
+
+This work is "maintained" (as per LPPL maintenance status) by
+ Joseph Wright.
+
+This work consists of the file achemso.dtx
+ and the derived files achemso.pdf,
+ achemso.bib,
+ achemso.cls,
+ achemso.ins,
+ achemso.sty,
+ achemso-demo.tex,
+ natmove.sty and
+ a number of configuration files.
+
+\endpostamble
\usedir{tex/latex/achemso}
-\generate{\file{\jobname.sty}{\from{\jobname.dtx}{package}}
- \file{\jobname.cls}{\from{\jobname.dtx}{class}}
- \file{natmove.sty}{\from{natmove.dtx}{package}}
-}
-\usedir{source/latex/achemso}
-\generate{\file{\jobname.ins}{\from{\jobname.dtx}{install}}
+\generate{
+ \file{\jobname.cls}{\from{\jobname.dtx}{class}}
+ \file{\jobname.sty}{\from{\jobname.dtx}{package}}
+ \file{natmove.sty}{\from{\jobname.dtx}{natmove}}
}
\usedir{tex/latex/achemso/config}
\generate{\file{achre4.cfg}{\from{\jobname.dtx}{achre4}}
@@ -58,8 +85,8 @@ \file{iecred.cfg}{\from{\jobname.dtx}{iecred}}
\file{inoraj.cfg}{\from{\jobname.dtx}{inoraj}}
}
-\generate{\file{jafcau.cfg}{\from{\jobname.dtx}{jafcau}}
- \file{jacsat.cfg}{\from{\jobname.dtx}{jacsat}}
+\generate{\file{jacsat.cfg}{\from{\jobname.dtx}{jacsat}}
+ \file{jafcau.cfg}{\from{\jobname.dtx}{jafcau}}
\file{jceaax.cfg}{\from{\jobname.dtx}{jceaax}}
\file{jcisd8.cfg}{\from{\jobname.dtx}{jcisd8}}
\file{jctcce.cfg}{\from{\jobname.dtx}{jctcce}}
@@ -81,21 +108,44 @@ \file{oprdfk.cfg}{\from{\jobname.dtx}{oprdfk}}
\file{orgnd7.cfg}{\from{\jobname.dtx}{orgnd7}}
}
-\nopreamble\nopostamble
\usedir{bibtex/bst/achemso}
-\generate{\file{achemso.bst}{\from{\jobname.dtx}{bst}}
- \file{biochem.bst}{\from{\jobname.dtx}{bst,bio}}
-}
-\nopreamble\nopostamble
-\usedir{doc/latex/achemso}
-\generate{\file{achemso.bib}{\from{\jobname.dtx}{refs}}
-}
-\nopreamble\nopostamble
-\usedir{doc/latex/achemso}
-\generate{\file{README.txt}{\from{\jobname.dtx}{readme}}
- \file{achemso-demo.tex}{\from{\jobname.dtx}{demo}}
+\generate{
+ \file{achemso.bst}{\from{\jobname.dtx}{bst}}
+ \file{biochem.bst}{\from{\jobname.dtx}{bst,bio}}
}
\endbatchfile
-\endinput
+
+%%
+%% Originally developed by Mats Dahlgren
+%% Copyright (C) 1996-1998 by Mats Dahlgren
+%% Copyright (C) 2008-2009 by
+%% Joseph Wright <joseph.wright@morningstar2.co.uk>
+%%
+%% Part of this bundle is derived from cite.sty, to which the
+%% following license applies:
+%% Copyright (C) 1989-2003 by Donald Arseneau
+%% These macros may be freely transmitted, reproduced, or
+%% modified provided that this notice is left intact.
+%%
+%% It may be distributed and/or modified under the conditions of
+%% the LaTeX Project Public License (LPPL), either version 1.3c of
+%% this license or (at your option) any later version. The latest
+%% version of this license is in the file:
+%%
+%% http://www.latex-project.org/lppl.txt
+%%
+%% This work is "maintained" (as per LPPL maintenance status) by
+%% Joseph Wright.
+%%
+%% This work consists of the file achemso.dtx
+%% and the derived files achemso.pdf,
+%% achemso.bib,
+%% achemso.cls,
+%% achemso.ins,
+%% achemso.sty,
+%% achemso-demo.tex,
+%% natmove.sty and
+%% a number of configuration files.
+%%
%%
%% End of file `achemso.ins'.
diff --git a/Master/texmf-dist/source/latex/achemso/natmove.dtx b/Master/texmf-dist/source/latex/achemso/natmove.dtx deleted file mode 100644 index fdbd58cde49..00000000000 --- a/Master/texmf-dist/source/latex/achemso/natmove.dtx +++ /dev/null @@ -1,601 +0,0 @@ -% \iffalse meta-comment -% -% Portions copyright (C) 1989-2003 by -% Donald Arseneau -% Copyright (C) 2007-08 by -% Joseph Wright <joseph.wright@morningstar2.co.uk> -% -% Part of this file is derived from cite.sty, to which the following -% license applies: -%-------------------------------------------------------------------- -% Copyright (C) 1989-2003 by Donald Arseneau -% These macros may be freely transmitted, reproduced, or modified -% provided that this notice is left intact. -%-------------------------------------------------------------------- -% -% This work may be distributed and/or modified under the -% conditions of the LaTeX Project Public License, either -% version 1.3c of this license or (at your option) any later -% version. The latest version of this license is in -% http://www.latex-project.org/lppl.txt -% and version 1.3c or later is part of all distributions of -% LaTeX version 2005/12/01 or later. -% -% This work has the LPPL maintenance status `maintained'. -% -% The current maintainer of this work is Joseph Wright. -% -% This work consists of the source file natmove.dtx -% and the derived files natmove.ins, -% natmove.sty, -% natmove.pdf, -% natmove-manual.pdf and -% jawltxdoc.sty -% -% TDS-ready files: -% The compressed file achemso.tds.zip contains an unpacked version -% of all of the files included here, and pre-compiled -% documentation in PDF format. Simply decompress achemso.tds.zip -% in your local TeX directory, run your hash program (texhash, -% initexmf --update-fndb, etc.) and everything will be ready to -% go. The user documentation for the package is called -% natmove-manual.pdf; the file natmove.pdf includes the user -% manual and the fully-indexed source code. -% -% Unpacking: -% (a) If natmove.ins is present: -% tex natmove.ins -% (b) Without natmove.ins: -% tex natmove.dtx -% (c) If you use LaTeX to generate files: -% latex \let\install=y\input{natmove.dtx} -% -% Documentation: -% (a) Without write18 enabled: -% pdflatex natmove.dtx -% bibtex8 --wolfgang natmove -% makeindex -s gind.ist natmove.idx -% makeindex -s gglo.ist -o natmove.gls natmove.glo -% pdflatex natmove.dtx -% pdflatex natmove.dtx -% (b) With write18 enabled: -% pdflatex natmove.dtx -% pdflatex natmove.dtx -% pdflatex natmove.dtx -% -% Installation: -% Copy natmove.sty to a location searched by TeX, and if required -% by your TeX installation, run the appropriate command to build -% a hash of files (texhash, initexmf --update-fndb, etc.) -% -% Note: -% The jawltxdoc.sty file is not needed for installation, -% only for building the documentation; it may be deleted -% after producing the documentation (if necessary). -% -%<*ignore> -% This is all taken verbatim from Heiko Oberdiek's packages -\begingroup - \def\x{LaTeX2e}% -\expandafter\endgroup -\ifcase 0\ifx\install y1\fi\expandafter - \ifx\csname processbatchFile\endcsname\relax\else1\fi - \ifx\fmtname\x\else 1\fi\relax -\else\csname fi\endcsname -%</ignore> -%<*install> -\input docstrip.tex -\keepsilent -\askforoverwritefalse -\preamble - ---------------------------------------------------------------- - natmove --- Automatic citation moving with natbib - Maintained by Joseph Wright - E-mail: joseph.wright@morningstar2.co.uk - Released under the LaTeX Project Public License v1.3c or later - See http://www.latex-project.org/lppl.txt - ---------------------------------------------------------------- - -\endpreamble -\Msg{Generating natmove files:} -\generate{\file{jawltxdoc.sty}{\from{\jobname.dtx}{jawltxdoc}} -} -\usedir{tex/latex/achemso} -\generate{\file{\jobname.sty}{\from{\jobname.dtx}{package}} -} -\usedir{source/latex/achemso} -\generate{\file{\jobname.ins}{\from{\jobname.dtx}{install}} -} -\endbatchfile -%</install> -%<*ignore> -\fi -% Will Robertson's trick -\immediate\write18{bibtex8 --wolfgang \jobname} -\immediate\write18{makeindex -s gind.ist -o \jobname.ind \jobname.idx} -\immediate\write18{makeindex -s gglo.ist -o \jobname.gls \jobname.glo} -%</ignore> -%<*driver> -\PassOptionsToClass{a4paper}{article} -\documentclass[german,english,UKenglish]{ltxdoc} -\EnableCrossrefs -\CodelineIndex -\RecordChanges -%\OnlyDescription -\usepackage[sort&compress,numbers,super]{natbib} -\usepackage{mciteplus} -\usepackage{jawltxdoc} -\begin{document} - \DocInput{\jobname.dtx} -\end{document} -%</driver> -% \fi -% -%\CheckSum{158} -% -% \CharacterTable -% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z -% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z -% Digits \0\1\2\3\4\5\6\7\8\9 -% Exclamation \! Double quote \" Hash (number) \# -% Dollar \$ Percent \% Ampersand \& -% Acute accent \' Left paren \( Right paren \) -% Asterisk \* Plus \+ Comma \, -% Minus \- Point \. Solidus \/ -% Colon \: Semicolon \; Less than \< -% Equals \= Greater than \> Question mark \? -% Commercial at \@ Left bracket \[ Backslash \\ -% Right bracket \] Circumflex \^ Underscore \_ -% Grave accent \` Left brace \{ Vertical bar \| -% Right brace \} Tilde \~} -% -%\GetFileInfo{\jobname.sty} -% -%\DoNotIndex{\!,\.,\?,\@empty,\@firstoftwo,\@ifmtarg} -%\DoNotIndex{\@ifpackageloaded,\@m,\@nil,\@secondoftwo} -%\DoNotIndex{\AtBeginDocument,\begingroup,\catcode,\def,\else} -%\DoNotIndex{\endgroup,\expandafter,\fi,\frenchspacing,\futurelet} -%\DoNotIndex{\gdef,\global,\ifnum,\ifx,\ifNAT@super,\lastskip} -%\DoNotIndex{\leavevmode,\let,\long,\mathchardef,\NeedsTeXFormat} -%\DoNotIndex{,\newcommand,\newif,\PackageWarning,\ProvidesPackage,\Q} -%\DoNotIndex{\relax,\renewcommand,\RequirePackage,\sfcode,\skip@} -%\DoNotIndex{\space,\spacefactor,\unskip} -% -%\changes{v1.0}{2008/06/22}{First public release} -% -%\setkeys{lst}{language=[LaTeX]{TeX},moretexcs={citenum, -% citeyear,citeauthor}} -% -%\title{\currpkg\ --- Automatic citation moving with natbib^^A -% \thanks{This file describes version \fileversion, last revised -% \filedate.}} -%\author{Joseph Wright^^A -% \thanks{E-mail: joseph.wright@morningstar2.co.uk}} -%\date{Released \filedate} -% -%\maketitle -% -%\newcommand*{\ACS}{\textsc{acs}} -%\begin{abstract} -% The \currpkg package adds the ability to move citations after -% punctuation automatically to the \pkg{natbib} package, in the same -% way as with \pkg{cite}. With non-superscript citations, no action -% is taken. -%\end{abstract} -% -%\begin{multicols}{2} -% \tableofcontents -%\end{multicols} -% -%\section{Using the package} -% The \currpkg package does only one job. It brings the ability to -% move punctuation after citations, using code borrowed from the -% \pkg{cite} package. -%\begin{LaTeXexample} -% Some text \cite{Coghill2006} some more text.\\ -% Some text ending a sentence \cite{Coghill2006}. -%\end{LaTeXexample} -% This is deactivated for other citation types. -%\begin{LaTeXexample} -% Some text \citeyear{Coghill2006}.\\ -% Some text \citeauthor{Coghill2006}.\\ -% Some text \citenum{Coghill2006}. -%\end{LaTeXexample} -% The package does nothing if the \opt{super} option has not been -% given to \pkg{natbib}. This means that the source can be written -% without needing to decide where citations will to appear, with the -% \opt{super} option for \pkg{natbib} controlling the result. -% -%\DescribeMacro{\natmovechars} -% One user macro is provided: \cs{natmovechars}. This contains -% the characters which are moved before superscript punctuation. -% The default contents is |,;:.| and can be set using -% \cs{renewcommand*}: -%\begin{LaTeXexample} -% \renewcommand*{\natmovechars}{.} -% Some text \cite{Coghill2006}, -% more text \cite{Coghill2006}. -%\end{LaTeXexample} -% -%\StopEventually{% -% \PrintChanges -% \PrintIndex -% \bibliographystyle{achemso} -% \bibliography{achemso}} -% -%\iffalse -%<*package> -%\fi -%\section{The code} -%\begin{macro}{\nmv@id} -% The package file is designed to be usable with any document class. -% It sets up the basics, but leaves some settings to the class file. -% \begin{macrocode} -\NeedsTeXFormat{LaTeX2e} -\def\nmv@id$#1: #2.#3 #4 #5-#6-#7 #8 #9${% - #5/#6/#7\space v1.0\space} -\ProvidesPackage{natmove} - [\nmv@id$Id: natmove.dtx 29 2008-08-22 07:47:26Z joseph $ - Automatic citation moving with natbib] -% \end{macrocode} -%\end{macro} -%\begin{macro}{\nmv@ifmtarg} -%\begin{macro}{\nmv@xifmtarg} -% To keep down dependance on other packages, the very short code -% block from \pkg{ifmtarg} is copied here with an internal name. -% \begin{macrocode} -\begingroup - \catcode`\Q=3 - \long\gdef\nmv@ifmtarg#1{% - \nmv@xifmtarg#1QQ\@secondoftwo\@firstoftwo\@nil} - \long\gdef\nmv@xifmtarg#1#2Q#3#4#5\@nil{#4} -\endgroup -% \end{macrocode} -%\end{macro} -%\end{macro} -%\begin{macro}{\ifnmv@cite} -% A flag is need to watch whether \cs{cite} or another macro is in -% use. -% \begin{macrocode} -\newif\ifnmv@cite -% \end{macrocode} -%\end{macro} -%\begin{macro}{\nmv@citex} -% Using the flag, either the new internal macro, or the -% \pkg{natbib} original, can be called. -% \begin{macrocode} -\newcommand*{\nmv@citex}{% - \ifnmv@cite - \expandafter\nmv@citex@ - \else - \expandafter\nmv@natcitex - \fi} -% \end{macrocode} -%\end{macro} -%\begin{macro}{\nmv@citex@} -% The new version of \cs{@citex} is needed that looks ahead of the -% citation using \cs{futurelet}. There are three arguments to -% \cs{@citex} when using \pkg{natbib}. Other than that, the trick -% used here is similar to that in \pkg{cite}. -% \begin{macrocode} -\def\nmv@citex@[#1][#2]#3{% - \leavevmode - \skip@\lastskip - \unskip - \begingroup -% \end{macrocode} -%\begin{macro}{\nmv@arg} -% The arguments of the macro now need to be saved, before handing off -% to the ``search'' macro. -% \begin{macrocode} - \def\nmv@arg{[#1][#2]{#3}}% -% \end{macrocode} -%\end{macro} -%\begin{macro}{\nmv@citex@end} -% The entire block to be executed after punctuation is set up here, -% to make recursion easier. The system used is very similar to that -% in \pkg{cite}. Notice that the \cs{relax} is essential. -% \begin{macrocode} - \newcommand*{\nmv@citex@end}{% - \expandafter\nmv@natcitex\nmv@arg - \endgroup}% - \global\nmv@citefalse - \nmv@citex@getnext\relax} -% \end{macrocode} -%\end{macro} -%\begin{macro}{\nmv@citex@getnext} -%\begin{macro}{\nmv@citex@next} -% The next token on the input stack is saved into -% \cs{nmv@citex@next}, after gobbling up one token. -% \begin{macrocode} -\newcommand*{\nmv@citex@getnext}[1]{% - \futurelet\nmv@citex@next\nmv@citex@punct} -% \end{macrocode} -%\end{macro} -%\end{macro} -%\end{macro} -%\begin{macro}{\nmv@citex@punct} -%\begin{macro}{\nmv@citex@loop} -% The working macro for moving the punctuation. This is very much -% like \cs{@citey} in the \pkg{cite} package. The initial assumption -% is that the loop will terminate, and so the recursion call will -% simply do the finalisation. -% \begin{macrocode} -\newcommand*{\nmv@citex@punct}{% - \let\nmv@citex@loop\nmv@citex@end -% \end{macrocode} -% A check is made for doubled full stops. -% \begin{macrocode} - \ifx.\nmv@citex@next\@empty - \ifnum\spacefactor<\nmv@citex@sfac\else - \let\nmv@citex@next\relax - \let\nmv@citex@loop\nmv@citex@getnext - \fi - \fi -% \end{macrocode} -% The other cases are handled. -% \begin{macrocode} - \expandafter\nmv@citex@pnct\natmovechars\@empty - \nmv@citex@loop} -% \end{macrocode} -%\end{macro} -%\end{macro} -%\begin{macro}{\nmv@citex@pnct} -% The final part of the punctuation moving system. -% \begin{macrocode} -\def\nmv@citex@pnct#1#2\@empty{% - \ifx\nmv@citex@next#1\@empty - #1% - \let\nmv@citex@loop\nmv@citex@getnext - \fi - \ifx\@empty#2\@empty\else - \expandafter\nmv@citex@pnct#2\@empty - \fi} -% \end{macrocode} -%\end{macro} -%\begin{macro}{\nmv@citex@sfac} -% The value of the spacing factor after a full stop is used to signal -% doubled punctuation. For French spacing, a bit of patching is -% needed. -% \begin{macrocode} -\mathchardef\nmv@citex@sfac3000 -\expandafter\renewcommand\expandafter*\expandafter{\expandafter% - \frenchspacing\expandafter}\expandafter{% - \frenchspacing - \mathchardef\nmv@citex@sfac1001 - \sfcode`\.\nmv@citex@sfac - \sfcode`\?\nmv@citex@sfac - \sfcode`\!\nmv@citex@sfac} -\ifnum\sfcode`\.=\@m - \frenchspacing -\fi -% \end{macrocode} -%\end{macro} -%\begin{macro}{\nmv@activate} -%\begin{macro}{\@citex} -%\begin{macro}{\nmv@natcitex} -%\begin{macro}{\cite} -%\begin{macro}{\nmv@cite} -%\begin{macro}{\nmv@notactivate} -% The swap has to be done at the beginning of the document. The -% internal flag from \pkg{natbib} is used, but under the -% circumstances we should be safe. \cs{cite} is also patched to make -% the system active. A -% \begin{macrocode} -\newcommand*{\nmv@activate}{% - \let\nmv@natcitex\@citex - \let\@citex\nmv@citex - \let\nmv@cite\cite - \renewcommand*{\cite}[2][]{% - \nmv@ifmtarg{##1} - {\nmv@citetrue - \nmv@cite{##2}} - {\nmv@citefalse - \nmv@cite[##1]{##2}}}} -\AtBeginDocument{ - \@ifpackageloaded{natbib} - {\ifNAT@super - \nmv@activate - \else - \nmv@notactivate - \fi} - {\PackageWarning{natmove} - {The natbib package has not been loaded}}} -\newcommand*{\nmv@notactivate}{} -% \end{macrocode} -%\end{macro} -%\end{macro} -%\end{macro} -%\end{macro} -%\end{macro} -%\end{macro} -%\begin{macro}{\natmovechars} -% A user macro is needed for moving characters. -% \begin{macrocode} -\newcommand*{\natmovechars}{.,;:} -% \end{macrocode} -%\end{macro} -%\iffalse -%</package> -%\fi -% -%\Finale -% -%\iffalse -%<*jawltxdoc> -\NeedsTeXFormat{LaTeX2e} -\ProvidesPackage{jawltxdoc} -\usepackage[T1]{fontenc} -\usepackage{lmodern} -\usepackage[final]{listings,graphicx,microtype} -\usepackage[scaled=0.95]{helvet} -\usepackage[version=3]{mhchem} -\usepackage[osf]{mathpazo} -\usepackage{booktabs,array,url,courier,xspace,varioref} -\usepackage{upgreek,ifpdf,float,caption,longtable,babel} -\begingroup - \@ifundefined{eTeXversion} - {\aftergroup\@gobble} - {\aftergroup\@firstofone} -\endgroup - {\usepackage{etoolbox}} -\floatstyle{plaintop} -\restylefloat{table} -\labelformat{figure}{\figurename~#1} -\labelformat{table}{\tablename~#1} -\ifpdf - \usepackage{embedfile} - \embedfile[% - stringmethod=escape,% - mimetype=plain/text,% - desc={LaTeX docstrip source archive for package `\jobname'}% - ]{\jobname.dtx} -\fi -\IfFileExists{\jobname.sty} - {\usepackage{\jobname}}{} -\usepackage[numbered]{hypdoc} -\setcounter{IndexColumns}{2} -\newlength\LaTeXwidth -\newlength\LaTeXoutdent -\newlength\LaTeXgap -\setlength\LaTeXgap{1em} -\setlength\LaTeXoutdent{-0.15\textwidth} -\newbox\lst@samplebox -\edef\LaTeXexamplefile{\jobname.tmp} -\lst@RequireAspects{writefile} -\lstnewenvironment{LaTeXexample}[1][example]{% - \global\let\lst@intname\@empty - \ifcsname LaTeXcode#1\endcsname - \expandafter\let\expandafter\LaTeXcode - \csname LaTeXcode#1\endcsname - \expandafter\let\expandafter\LaTeXcodeend - \csname LaTeXcode#1end\endcsname - \else - \PackageError{jawltxdoc} - {Undefined example type `#1'} - \@ehd - \let\LaTeXcode\relax - \let\LaTeXcodeend\relax - \fi - \LaTeXcode} - {\lst@EndWriteFile - \LaTeXcodeend} -\newcommand*{\LaTeXcodeexample}{% - \setbox\lst@samplebox=\hbox\bgroup - \LaTeXcodefloat} -\let\LaTeXcoderesultonly\LaTeXcodeexample -\newcommand*{\LaTeXcodeexampleend}{% - \egroup - \setlength\LaTeXwidth{\wd\lst@samplebox}% - \begin{list}{}{% - \setlength\itemindent{0pt} - \setlength\leftmargin\LaTeXoutdent - \setlength\rightmargin{0pt}}% - \item - \setlength\LaTeXoutdent{-0.15\textwidth} - \begin{minipage}[c]{% - \textwidth-\LaTeXwidth-\LaTeXoutdent-\LaTeXgap} - \LaTeXcodefloatend - \end{minipage}% - \hfill - \begin{minipage}[c]{\LaTeXwidth}% - \hbox to\linewidth{\box\lst@samplebox\hss}% - \end{minipage}% - \end{list}} -\newcommand*{\LaTeXcodefloat}{% - \setkeys{lst}{tabsize=4,gobble=3,breakindent=0pt, - basicstyle=\small\ttfamily,basewidth=0.51em, - keywordstyle=\color{blue}}% - \lst@BeginAlsoWriteFile{\LaTeXexamplefile}} -\let\LaTeXcodenoexample\LaTeXcodefloat -\let\LaTeXcodenoexampleend\@empty -\newcommand*{\LaTeXcodefloatend}{% - \MakePercentComment\catcode`\^^M=10\relax - \small - {\setkeys{lst}{SelectCharTable=\lst@ReplaceInput{\^\^I}% - {\lst@ProcessTabulator}}% - \leavevmode \input{\LaTeXexamplefile}}% - \MakePercentIgnore} -\newcommand*{\LaTeXcoderesultonlyend}{\egroup\LaTeXcodefloatend} -\lstnewenvironment{BibTeXexample}{% - \global\let\lst@intname\@empty - \setbox\lst@samplebox=\hbox\bgroup - \setkeys{lst}{tabsize=4,gobble=3,breakindent=0pt, - basicstyle=\small\ttfamily,basewidth=0.51em, - keywordstyle=\color{black}} - \lst@BeginAlsoWriteFile{\LaTeXexamplefile}} - {\lst@EndWriteFile - \LaTeXcodeexampleend} -\newcommand*{\DescribeOption}{% - \leavevmode\@bsphack\begingroup\MakePrivateLetters - \Describe@Option} -\newcommand*{\Describe@Option}[1]{\endgroup - \marginpar{\raggedleft\PrintDescribeEnv{#1}}% - \SpecialOptionIndex{#1}\@esphack\ignorespaces} -\newcommand*{\SpecialOptionIndex}[1]{\@bsphack - \index{#1\actualchar{\protect\ttfamily#1} - (option)\encapchar usage}% - \index{options:\levelchar#1\actualchar{\protect\ttfamily#1}% - \encapchar usage}\@esphack} -\newcommand*{\indexopt}[1]{\DescribeOption{#1}\opt{#1}} -\newcommand*{\DescribeOptionInfo}[2]{% - \DescribeOption{#1}% - \opt{#1=\meta{#2}}\xspace} -\newcommand*{\ofixarg}[1]{% - {\ttfamily[}% - \ifmmode \expandafter \nfss@text \fi - {% - \meta@font@select - \edef\meta@hyphen@restore{% - \hyphenchar\the\font\the\hyphenchar\font}% - \hyphenchar\font\m@ne - \language\l@nohyphenation - #1\/% - \meta@hyphen@restore - }% - {\ttfamily]}} -\newcommand*{\pkg}[1]{\textsf{#1}} -\newcommand*{\currpkg}{\pkg{\jobname}\xspace} -\newcommand*{\opt}[1]{\texttt{#1}} -\newcommand*{\defaultopt}[1]{\opt{\textbf{#1}}} -\newcommand*{\file}[1]{\texttt{#1}} -\newcommand*{\ext}[1]{\file{.#1}} -\newcommand*{\latin}[1]{\emph{#1}} -\newcommand*{\etc}{% - \@ifnextchar. - {\latin{etc}} - {\latin{etc}.\xspace}} -\newcommand*{\eg}{% - \@ifnextchar. - {\latin{e.g}} - {\latin{e.g}.\xspace}} -\newcommand*{\ie}{% - \@ifnextchar. - {\latin{i.e}} - {\latin{i.e}.\xspace}} -\newcommand*{\etal}{% - \@ifnextchar. - {\latin{et~al.}} - {\latin{et~al}.\xspace}} -\newcommand*{\AMS}{{\protect\usefont{OMS}{cmsy}{m}{n}% - A\kern-.1667em\lower.5ex\hbox{M}\kern-.125emS}} -\providecommand*{\eTeX}{\ensuremath{\varepsilon}-\TeX} -\DeclareRobustCommand*{\XeTeX} - {X\kern-.125em\lower.5ex\hbox{\reflectbox{E}}\kern-.1667em\TeX} -\providecommand*{\CTAN}{\textsc{ctan}} -\@ifpackageloaded{etoolbox} - {\patchcmd{\@addmarginpar} - {\@latex@warning@no@line {Marginpar on page \thepage\space moved}} - {\relax}{}{}} - {} -\newcounter{argument} -\g@addto@macro\endmacro{\setcounter{argument}{0}} -\newcommand*\darg[1]{% - \stepcounter{argument}% - {\ttfamily\char`\#\theargument~:~}#1\par\noindent\ignorespaces} -\newcommand*\doarg[1]{% - \stepcounter{argument}% - {\ttfamily\makebox[0pt][r]{[}% - \char`\#\theargument]:~}#1\par\noindent\ignorespaces} -%</jawltxdoc> -%\fi diff --git a/Master/texmf-dist/source/latex/achemso/natmove.ins b/Master/texmf-dist/source/latex/achemso/natmove.ins deleted file mode 100644 index 0fb2fa11c8e..00000000000 --- a/Master/texmf-dist/source/latex/achemso/natmove.ins +++ /dev/null @@ -1,41 +0,0 @@ -%%
-%% This is file `natmove.ins',
-%% generated with the docstrip utility.
-%%
-%% The original source files were:
-%%
-%% natmove.dtx (with options: `install')
-%% ----------------------------------------------------------------
-%% natmove --- Automatic citation moving with natbib
-%% Maintained by Joseph Wright
-%% E-mail: joseph.wright@morningstar2.co.uk
-%% Released under the LaTeX Project Public License v1.3c or later
-%% See http://www.latex-project.org/lppl.txt
-%% ----------------------------------------------------------------
-%%
-\input docstrip.tex
-\keepsilent
-\askforoverwritefalse
-\preamble
- ----------------------------------------------------------------
- natmove --- Automatic citation moving with natbib
- Maintained by Joseph Wright
- E-mail: joseph.wright@morningstar2.co.uk
- Released under the LaTeX Project Public License v1.3c or later
- See http://www.latex-project.org/lppl.txt
- ----------------------------------------------------------------
-
-\endpreamble
-\Msg{Generating natmove files:}
-\generate{\file{jawltxdoc.sty}{\from{\jobname.dtx}{jawltxdoc}}
-}
-\usedir{tex/latex/achemso}
-\generate{\file{\jobname.sty}{\from{\jobname.dtx}{package}}
-}
-\usedir{source/latex/achemso}
-\generate{\file{\jobname.ins}{\from{\jobname.dtx}{install}}
-}
-\endbatchfile
-\endinput
-%%
-%% End of file `natmove.ins'.
|