summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/source
diff options
context:
space:
mode:
Diffstat (limited to 'Master/texmf-dist/source')
-rw-r--r--Master/texmf-dist/source/latex/standalone/Makefile82
-rw-r--r--Master/texmf-dist/source/latex/standalone/gincltex.dtx355
-rw-r--r--Master/texmf-dist/source/latex/standalone/gincltex.ins49
3 files changed, 0 insertions, 486 deletions
diff --git a/Master/texmf-dist/source/latex/standalone/Makefile b/Master/texmf-dist/source/latex/standalone/Makefile
deleted file mode 100644
index a9df0a0e9cc..00000000000
--- a/Master/texmf-dist/source/latex/standalone/Makefile
+++ /dev/null
@@ -1,82 +0,0 @@
-TEXMF=${HOME}/texmf
-INSTALLDIR=${TEXMF}/tex/latex/standalone
-DOCINSTALLDIR=${TEXMF}/doc/latex/standalone
-CP=cp
-RMDIR=rm -rf
-PDFLATEX=pdflatex -interaction=batchmode
-LATEXMK=latexmk -pdf -silent
-
-PACKEDFILES=standalone.cls standalone.sty standalone.cfg standalone.tex
-DOCFILES=standalone.pdf
-SRCFILES=standalone.dtx standalone.ins README Makefile
-
-all: unpack doc
-
-package: unpack
-class: unpack
-
-${PACKEDFILES}: standalone.dtx standalone.ins
- yes | pdflatex standalone.ins
-
-unpack: ${PACKEDFILES}
-
-# 'doc' and 'standalone.pdf' call itself until everything is stable
-doc: standalone.pdf
- @${MAKE} --no-print-directory standalone.pdf
-
-pdfopt: doc
- @-pdfopt standalone.pdf .temp.pdf && mv .temp.pdf standalone.pdf
-
-%.pdf: %.dtx
- ${PDFLATEX} $<
- -makeindex -s gind.ist -o "$@" "$<"
- -makeindex -s gglo.ist -o "$@" "$<"
- ${PDFLATEX} $<
- ${PDFLATEX} $<
-
-
-.PHONY: test
-
-test: unpack
- for T in test*.tex; do echo "$$T"; pdflatex -interaction=batchmode $$T && echo "OK" || echo "Failure"; done
-
-clean:
- -latexmk -C standalone.dtx
- ${RM} ${PACKEDFILES} *.zip *.log *.aux *.toc *.vrb *.nav *.pdf *.snm *.out *.fdb_latexmk *.glo *.gls *.hd *.sta *.stp
- ${RMDIR} tds
-
-install: unpack doc ${INSTALLDIR} ${DOCINSTALLDIR}
- ${CP} ${PACKEDFILES} ${INSTALLDIR}
- ${CP} ${DOCFILES} ${DOCINSTALLDIR}
- texhash ${TEXMF}
-
-${INSTALLDIR}:
- mkdir -p $@
-
-${DOCINSTALLDIR}:
- mkdir -p $@
-
-ctanify: ${SRCFILES} ${DOCFILES} standalone.tds.zip
- ${RM} standalone.zip
- zip standalone.zip $^
- unzip -t standalone.zip
- unzip -t standalone.tds.zip
-
-zip: standalone.zip
-
-tdszip: standalone.tds.zip
-
-standalone.zip: ${SRCFILES} ${DOCFILES} | pdfopt
- ${RM} $@
- zip $@ $^
-
-standalone.tds.zip: ${SRCFILES} ${PACKEDFILES} ${DOCFILES} | pdfopt
- ${RMDIR} tds
- mkdir -p tds/tex/latex/standalone
- mkdir -p tds/doc/latex/standalone
- mkdir -p tds/source/latex/standalone
- ${CP} ${DOCFILES} tds/doc/latex/standalone
- ${CP} ${PACKEDFILES} tds/tex/latex/standalone
- ${CP} ${SRCFILES} tds/source/latex/standalone
- cd tds; zip -r ../$@ .
-
diff --git a/Master/texmf-dist/source/latex/standalone/gincltex.dtx b/Master/texmf-dist/source/latex/standalone/gincltex.dtx
deleted file mode 100644
index 819f69487f9..00000000000
--- a/Master/texmf-dist/source/latex/standalone/gincltex.dtx
+++ /dev/null
@@ -1,355 +0,0 @@
-% \iffalse meta-comment
-%
-% Copyright (C) 2009 by Martin Scharrer <martin@scharrer-online.de>
-% -----------------------------------------------------------------
-%
-% This work may be distributed and/or modified under the
-% conditions of the LaTeX Project Public License, either version 1.3c
-% of this license or (at your option) any later version.
-% The latest version of this license is in
-%
-% http://www.latex-project.org/lppl.txt
-%
-% and version 1.3c or later is part of all distributions of LaTeX
-% version 2008/05/04 or later.
-%
-% This work has the LPPL maintenance status `maintained'.
-%
-% The Current Maintainer of this work is Martin Scharrer.
-%
-% This work consists of the files gincltex.dtx, gincltex.ins
-% and the derived file gincltex.sty.
-%
-% $Id: skeleton.dtx 1057 2009-05-04 11:11:37Z martin $
-% \fi
-%
-% \iffalse
-\RequirePackage{svn-prov}
-%<package>\ProvidesPackage{gincltex}
-%<*driver>
-\ProvidesFile{gincltex.dtx}
-%</driver>
- [2011/01/23 v0.1 Include external LaTeX files like graphics]
-%<*driver>
-\documentclass{ltxdoc}
-\usepackage{gincltex}
-\usepackage{hyperref}
-
-\EnableCrossrefs
-%\CodelineIndex
-\RecordChanges
-%\OnlyDescription
-\begin{document}
- \DocInput{\jobname.dtx}
- \PrintChanges
- %\newpage\PrintIndex
-\end{document}
-%</driver>
-% \fi
-%
-% \CheckSum{232}
-%
-% \CharacterTable
-% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
-% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
-% Digits \0\1\2\3\4\5\6\7\8\9
-% Exclamation \! Double quote \" Hash (number) \#
-% Dollar \$ Percent \% Ampersand \&
-% Acute accent \' Left paren \( Right paren \)
-% Asterisk \* Plus \+ Comma \,
-% Minus \- Point \. Solidus \/
-% Colon \: Semicolon \; Less than \<
-% Equals \= Greater than \> Question mark \?
-% Commercial at \@ Left bracket \[ Backslash \\
-% Right bracket \] Circumflex \^ Underscore \_
-% Grave accent \` Left brace \{ Vertical bar \|
-% Right brace \} Tilde \~}
-%
-%
-% \changes{v0.1}{2011/01/23}{First released version}
-%
-% \GetFileInfo{\jobname.dtx}
-%
-% \DoNotIndex{\newcommand,\newenvironment,\def,\edef,\xdef,\let}
-%
-% \ifpdf
-% \hypersetup{%
-% pdfauthor = {Martin Scharrer <martin@scharrer-online.de>},
-% pdftitle = {The gincltex package},
-% pdfsubject = {Documentation of LaTeX package gincltex},
-% pdfkeywords = {gincltex, include, graphic, source code, LaTeX, TeX}
-% }%
-% \fi
-% \clearpage
-% \null
-% \vspace*{-2em}
-% \begin{center}
-% {\LARGE\sffamily The \emph{gincltex} Package\\[\medskipamount]}
-% {\large\sffamily Part of the \emph{standalone} bundle\\[\medskipamount]}
-% {\large Martin Scharrer \\[\medskipamount]\normalsize
-% \url{martin@scharrer-online.de}\\[.8ex]
-% \url{http://www.ctan.org/pkg/standalone/}\\[\bigskipamount]}
-% {\large Version \fileversion\ -- \filedate}\\
-% \end{center}
-% \vspace{1.2em}%
-%
-% \section{Introduction}
-% This small package builds on the standard \LaTeX{} packages |graphic| and |graphicx|
-% and its extended form |graphicx| and allows external \LaTeX{} source files
-% to be included like image files:
-% \begin{quote}
-% |\includegraphics[<options>]{somefile.tex}|
-% \end{quote}
-%
-% Usually such \LaTeX{} files hold a picture environment like
-% |picture|, |pspicture|, |pgfpicture| or |tikzpicture|, which may take advantage
-% from the |standalone| class.
-%
-% All options of |\includegraphics| described in the manual of |graphic|/|graphicx| (the |grfguide|)
-% should be supported. Therefore it is possible to resize, rotate and clip the content
-% of the \LaTeX{} source file in the same way as for images.
-%
-% \section{Usage}
-% After loading the package the |.tex| extension is supported by |\includegraphics|
-% and the macro can be used in its normal form for \LaTeX{} files.
-% The content of the file is typeset first inside an |\hbox| (the primitive version of |\mbox|)
-% and then modified according to the given macro options.
-%
-% \subsection{Draft support}
-% The package supports the |draft| option of |graphics| which only displays an empty box
-% with the file name for all included graphics.
-% In this mode the source file should not be processed to reduce compile time.
-% However the size of the resulting box from the source file must be know in order
-% to reserve the required space. Therefore the \emph{bounding box} information is
-% cached for future runs with active |draft| option. The location where the information
-% is cached can be controlled with the |bb| option.
-%
-% \subsection{Package options}
-% The place where the bounding box information is cached can be adjusted with the
-% |bb| option. By default |bb=aux| is active which stores the bounding box information
-% in the |.aux| file. With |bb=file| this information is written in EPS format into
-% |.tex.bb| files, e.g. for each source file |name.tex| a file |name.tex.bb| is created.
-%
-%
-% \StopEventually{}
-% \iffalse
-%<*package>
-% \fi
-% \section{Implementation}
-% \subsection{Package Option}
-% \begin{macrocode}
-\newif\if@gincltex@bbfile
-\DeclareOption{bb=file}{\@gincltex@bbfiletrue}
-\DeclareOption{bb=aux}{\@gincltex@bbfilefalse}
-\ProcessOptions*\relax
-% \end{macrocode}
-%
-% \subsection{Requirements}
-% The |graphics| or |graphicx| package is required but not loaded to allow
-% the user to decide which one should be used
-% \begin{macrocode}
-\RequirePackage{pgf}
-% \end{macrocode}
-
-% \subsection{Graphics Rule Macros}
-% The following macro implement a \emph{graphics rule} for \LaTeX{} source code files.
-%
-% \begin{macro}{\Gin@rule@.tex}
-% This macro declares the graphics rule to the |graphics|/|x| package.
-% It is equivalent to |\DeclareGraphicsRule{.tex}{tex}{.tex}{}|, which is not
-% used here to not rely on the graphics packages at load time.
-% \begin{macrocode}
-\@namedef{Gin@rule@.tex}#1{{tex}{.tex}{#1}}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\gincltex@box}
-% A savebox required to transfer material from the `read' macro to the `include' macro.
-% Note that |\@tempboxa| is not used here because it might be used otherwise between the
-% two macros.
-% \begin{macrocode}
-\newsavebox\gincltex@box
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\gincltex@input}
-% Macro to input the \LaTeX{} source file.
-% Because |\includegraphics| can be used inside this file certain internal |graphics| macros
-% must be reset to there default value.
-% \begin{macrocode}
-\def\gincltex@input#1{%
- {\let\Gin@ext\relax\input{#1}}%
-}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\Ginclude@tex}
-% This driver macro is called from the standard |\includegraphics| macro to include the \LaTeX{} source file.
-% Some |\includegraphics| options like |angle| are handled by wrapping this macro in the appropriate
-% |graphics| macro like |\rotatebox|, but others must be handled here.
-% \begin{macrocode}
-\def\Ginclude@tex#1{%
- \begingroup
-% \end{macrocode}
-% The content of the source file might have been already saved into the |\gincltex@box| by the |\Gread@tex| macro.
-% If not it is saved here.
-% \begin{macrocode}
- \ifvoid\gincltex@box
- \sbox\gincltex@box{{\gincltex@input{#1}}}%
- \fi
-% \end{macrocode}
-% The bounding box points (lower left, upper right) are calculated. It is assumed that the `graphic' baseline starts at the
-% lower left point, so |llx=0|. The depth should be |0| as well but to be on the save side it is calculated here.
-% The upper right point is given by the box width and height.
-% \begin{macrocode}
- \def\Gin@llx{0}%
- \Gin@defaultbp\Gin@lly{-\dp\gincltex@box}%
- \Gin@defaultbp\Gin@urx{\wd\gincltex@box}%
- \Gin@defaultbp\Gin@ury{\ht\gincltex@box}%
-% \end{macrocode}
-% The |height|, |totalheight| and |width| options are already processed and the final requested height and width
-% to which the `graphic' should be scaled to are provided. The internal form of the |\resizebox| macro is used for
-% this.
-% \begin{macrocode}
- \Gscale@@box\totalheight{\Gin@req@width}{\Gin@req@height}{%
-% \end{macrocode}
-% The trimming and clipping operations (|trim|, |viewport| and |clip| options) are handled using a |pgfpicture| from
-% the |pgf| package, because it supports both DVI and PDF output.
-% \begin{macrocode}
- \begin{pgfpicture}%
- \pgfkeys{/pgf/.cd,inner sep=0pt,outer sep=0pt}%
- \pgfpathmoveto{\pgfqpoint{\Gin@llx bp}{\Gin@lly bp}}%
- \pgfpathlineto{\pgfqpoint{\Gin@urx bp}{\Gin@lly bp}}%
- \pgfpathlineto{\pgfqpoint{\Gin@urx bp}{\Gin@ury bp}}%
- \pgfpathlineto{\pgfqpoint{\Gin@llx bp}{\Gin@ury bp}}%
- \pgfpathclose
- \expandafter\pgfusepath\ifGin@clip{clip}\else{use as bounding box}\fi
- \pgfnode{rectangle}{base west}{\usebox\gincltex@box}{}{}%
- \end{pgfpicture}%
-% \end{macrocode}
-% \begin{macrocode}
- }%
- \endgroup
-}
-% \end{macrocode}
-% \end{macro}
-%
-% The |\Gread@tex| macro is defined in two different ways depending how the bounding box information is preserved.
-% This information is required to support the |draft| option of the |graphics| package.
-% \begin{macrocode}
-\if@gincltex@bbfile
-% \end{macrocode}
-% Use a |.tex.bb| file to store the bounding box information. The standardised EPS format is used here, so that the
-% |\Gread@eps| macro can be used.
-%
-% An output register is required to write the |.tex.bb| files. Advanced users are allowed to predefine it manually
-% in order to save a write register. Note that the writing is done inside the |.aux| file, therefore the |\@mainaux|
-% handle could be used here, because it is closed while reading the |.aux| file.
-% \begin{macrocode}
-\@ifundefined{gincltex@bbout}{\newwrite\gincltex@bbout}{}
-% \end{macrocode}
-%
-% \begin{macro}{\Gread@tex}
-% \begin{macrocode}
-\def\Gread@tex#1{%
- \IfFileExists{#1.bb}%
- {\edef\Gread@BBox{\@percentchar\@percentchar HiResBoundingBox}\Gread@eps{#1.bb}}%
- {%
- \sbox\gincltex@box{{\gincltex@input{#1}}}%
- \def\Gin@llx{0}%
- \Gin@defaultbp\Gin@lly{-\dp\gincltex@box}%
- \Gin@defaultbp\Gin@urx{\wd\gincltex@box}%
- \Gin@defaultbp\Gin@ury{\ht\gincltex@box}%
- \expandafter\xdef\csname gincltex@bb@#1\endcsname{{\Gin@llx}{\Gin@lly}{\Gin@urx}{\Gin@ury}}%
- \if@filesw
- \immediate\write\@auxout{\string\gincltex@bb{#1}\csname gincltex@bb@#1\endcsname}%
- \fi
- }%
-}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\gincltex@bb}
-% Write the bounding box information to the |.tex.bb| file. The hi-resolution version is used to be more accurate.
-% The code to write the normal version is disabled for now because it is unneeded and requires some non-trivial |pgfmath| calls.
-%
-% Because this macro is executed inside the |.aux| file, which is read before the begin AND at the end of the document, the macro
-% is defined as a no-op first two avoid unnecessary double execution.
-% \begin{macrocode}
-\def\gincltex@bb#1#2#3#4#5{}
-\AtBeginDocument{\let\gincltex@bb\gincltex@@bb}
-\def\gincltex@@bb#1#2#3#4#5{%
- \begingroup
- \immediate\openout\gincltex@bbout=#1.bb\relax
- %\pgfmathtruncatemacro\llx{ceil(#2)}%
- %\pgfmathtruncatemacro\lly{ceil(#3)}%
- %\pgfmathtruncatemacro\urx{ceil(#4)}%
- %\pgfmathtruncatemacro\ury{ceil(#5)}%
- %\immediate\write\gincltex@bbout{\@percentchar\@percentchar BoundingBox: \llx\space\lly\space\urx\space\ury}%
- \immediate\write\gincltex@bbout{\@percentchar\@percentchar HiResBoundingBox: #2 #3 #4 #5}%
- \immediate\closeout\gincltex@bbout
- \endgroup
-}
-% \end{macrocode}
-% \end{macro}
-%
-% Storing the bounding box information in the |.aux| file.
-% \begin{macrocode}
-\else
-% \end{macrocode}
-%
-% \begin{macro}{\Gread@tex@setbb}
-% Auxiliary macro to set the bounding box macros.
-% \begin{macrocode}
-\def\Gread@tex@setbb#1#2#3#4{%
- \def\Gin@llx{#1}%
- \def\Gin@lly{#2}%
- \def\Gin@urx{#3}%
- \def\Gin@ury{#4}%
-}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\Gread@tex}
-% Read the bounding box information. The only way to do this is to actually typeset the source file into a box.
-% The box is then reused in the |\Ginclude@tex| macro, so there is no overhead.
-% The bounding box information is written into the |.aux| file to avoid processing the source file in |draft| mode.
-% However if the corresponding macro is not define yet (e.g.\ |draft| run without |.aux| file) the file must be
-% read anyway.
-% \begin{macrocode}
-\def\Gread@tex#1{%
- \ifcase0\ifGin@draft\@ifundefined{gincltex@bb@#1}{0}{1}\fi\relax
- \sbox\gincltex@box{{\gincltex@input{#1}}}%
- \def\Gin@llx{0}%
- \Gin@defaultbp\Gin@lly{-\dp\gincltex@box}%
- \Gin@defaultbp\Gin@urx{\wd\gincltex@box}%
- \Gin@defaultbp\Gin@ury{\ht\gincltex@box}%
- \expandafter\xdef\csname gincltex@bb@#1\endcsname{{\Gin@llx}{\Gin@lly}{\Gin@urx}{\Gin@ury}}%
- \else
- \expandafter\expandafter\expandafter\Gread@tex@setbb\csname gincltex@bb@#1\endcsname
- \setbox\gincltex@box=\box\voidb@x
- \fi
- \if@filesw
- \immediate\write\@auxout{\string\gincltex@bb{#1}\csname gincltex@bb@#1\endcsname}%
- \fi
-}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\gincltex@bb}
-% Simply define the corresponding bounding box macro.
-% \begin{macrocode}
-\def\gincltex@bb#1#2#3#4#5{%
- \global\@namedef{gincltex@bb@#1}{{#2}{#3}{#4}{#5}}%
-}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macrocode}
-\fi
-\endinput
-% \end{macrocode}
-%
-% \Finale
-%</package>
-
diff --git a/Master/texmf-dist/source/latex/standalone/gincltex.ins b/Master/texmf-dist/source/latex/standalone/gincltex.ins
deleted file mode 100644
index 52858c81cc4..00000000000
--- a/Master/texmf-dist/source/latex/standalone/gincltex.ins
+++ /dev/null
@@ -1,49 +0,0 @@
-%% $Id: skeleton.ins 1041 2009-05-02 16:07:25Z martin $
-\input docstrip.tex
-\preamble
-
-Copyright (C) 2011 by Martin Scharrer <martin@scharrer-online.de>
-
-This work may be distributed and/or modified under the
-conditions of the LaTeX Project Public License, either version 1.3c
-of this license or (at your option) any later version.
-The latest version of this license is in
-
- http://www.latex-project.org/lppl.txt
-
-and version 1.3c or later is part of all distributions of LaTeX
-version 2008/05/04 or later.
-
-This work has the LPPL maintenance status `maintained'.
-
-The Current Maintainer of this work is Martin Scharrer.
-
-This work consists of the files gincltex.dtx, gincltex.ins
-and the derived file gincltex.sty.
-
-\endpreamble
-\keepsilent
-
-\generate{%
- \file{gincltex.sty}{\from{gincltex.dtx}{package}}%
-}
-
-\obeyspaces
-\Msg{*************************************************************}
-\Msg{* *}
-\Msg{* To finish the installation you have to move the following *}
-\Msg{* file into a directory searched by TeX: *}
-\Msg{* *}
-\Msg{* gincltex.sty *}
-\Msg{* *}
-\Msg{* To produce the documentation run the file gincltex.dtx *}
-\Msg{* through LaTeX. *}
-\Msg{* *}
-\Msg{* Happy TeXing! *}
-\Msg{* *}
-\Msg{*************************************************************}
-
-\endbatchfile
-
-%% vim: ft=tex
-