summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/source/latex
diff options
context:
space:
mode:
Diffstat (limited to 'Master/texmf-dist/source/latex')
-rw-r--r--Master/texmf-dist/source/latex/everypage/everypage.dtx451
-rw-r--r--Master/texmf-dist/source/latex/everypage/everypage.ins51
2 files changed, 371 insertions, 131 deletions
diff --git a/Master/texmf-dist/source/latex/everypage/everypage.dtx b/Master/texmf-dist/source/latex/everypage/everypage.dtx
index 02cf2149a38..e390b6b9804 100644
--- a/Master/texmf-dist/source/latex/everypage/everypage.dtx
+++ b/Master/texmf-dist/source/latex/everypage/everypage.dtx
@@ -1,6 +1,6 @@
% \iffalse meta-comment
%
-% Copyright 2006-2007
+% Copyright 2006-2007, 2020
% Sergio Callegari <sergio.callegari@gmail.com>
%
% ---------------------------------------------
@@ -21,10 +21,12 @@
%
%<*driver>
\documentclass{ltxdoc}
-\usepackage{mathptmx, helvet, courier}
+\usepackage{mathptmx}
+\usepackage[T1]{fontenc}
+\usepackage[scaled=0.92]{helvet}
+% \usepackage{courier}
+\usepackage{hologo}
\EnableCrossrefs
-\DoNotIndex{\def,\gdef,\let,\NeedsTeXFormat,\newcommand}
-\DoNotIndex{\ProvidesPackage,\endinput}
\CodelineIndex
\RecordChanges
\begin{document}
@@ -34,12 +36,19 @@
%
% \fi
%
-% \CheckSum{44}
+% \DoNotIndex{\@ifundefined, \g@addto@macro}
+% \DoNotIndex{\def, \gdef, \let, \newcommand}
+% \DoNotIndex{\MessageBreak, \PackageWarningNoLine, \NeedsTeXFormat}
+% \DoNotIndex{\ProvidesPackage, \RequirePackage}
+% \DoNotIndex{\put}
+% \DoNotIndex{\endinput}
+%
+% \CheckSum{71}
%
% \def\filename{everypage.dtx}
-% \def\fileversion{1.1}
-% \def\filedate{2007/06/20}
-% \def\docdate{2007/06/20}
+% \def\fileversion{2.0}
+% \def\filedate{2020/10/11}
+% \def\docdate{2020/10/11}
%
% \newcommand*{\Lpack}[1]{\textsf {#1}} ^^A typeset a package
% \newcommand*{\Lopt}[1]{\textsf {#1}} ^^A typeset an option
@@ -60,99 +69,322 @@
%
% \maketitle
%
+% \section*{WARNING}
+% \changes{R2.0}{2020/10/11}{Package is now in a `legacy' status.}
+%
+% This package is now in \emph{legacy status}. Functionality similar to
+% that provided by this package has been directly implemented in \LaTeX\
+% since its 2020 Fall release. Do not use \Lpack{everypage} in new
+% documents and do not rely on it in new packages or classes of
+% yours.
+%
+% \smallskip
+% When running on a pre-2020-10-01 version of \LaTeX, \Lpack{everypage}
+% will now fall back to \Lpack{everypage-1x}, its own past
+% code base.\smallskip
+%
+% When running on a modern \LaTeX, \Lpack{everypage} will strive to
+% provide its legacy interfaces by using the newer \LaTeX\ facilities.
+% However, full equivalence is not possible and breakage may occur. When
+% truly needed, try loading \Lpack{everypage-1x} in place of
+% \Lpack{everypage} to force usage of the old code base. This is expected
+% to keep working for a few more \LaTeX\ release cycles after Fall 2020.
+%
+% \bigskip\bigskip
+%
% \begin{abstract}
-% The \Lpack{everypage} package extends \LaTeX\ providing hooks to do
-% actions on every page or on the current page. Specifically, actions
-% are performed \emph{before} the page is shipped, so they can be
-% used to put watermarks \emph{in the background} of a page, or to
-% set the page layout. The package reminds in some sense
-% \Lpack{bobhook} by Karsten Tinnefeld, but it differs in the way in
-% which the hooks are implemented, as detailed in the following.
-% In some sense it may also be related to the package
-% \Lpack{everyshi} by Martin Schroeder, but again the implementation
-% is different.
+% The \Lpack{everypage} package was meant to extend \LaTeX\ providing
+% hooks to do actions on every page or on the current page. Currently,
+% similar functionality is directly provided by \LaTeX. Specifically,
+% \Lpack{everypage} supports actions performed \emph{before} the page is
+% shipped, so they can be used to put watermarks \emph{in the
+% background} of a page, or to set the page layout. The package is in
+% many ways similar to \Lpack{bobhook} by Karsten Tinnefeld, but it
+% differs in the way in which the hooks are implemented. In some sense,
+% it may also be related to package \Lpack{everyshi} by Martin
+% Schroeder, but again the implementation is different.
% \end{abstract}
%
% \section{Introduction}
-%
-% This program adds two \LaTeX\ hooks that get run when document
-% pages are finalized and output to the dvi or pdf
+%
+% Until a recent past, \LaTeX\ provided no explicit hooks to be run as
+% documents pages were finalized and output to the dvi or pdf
+% file. Consequently, many solutions were developed to work around this
+% limitation and to offer features (e.g., watermarks) that would otherwise
+% be impossible. These solution included packages such as
+% \Lpack{everyshi}, \Lpack{bobhook} and \Lpack{watermark}. Package
+% \Lpack{everypage} was a solution providing plumbing that could be used
+% in higher level packages such as \Lpack{draftwatermark} (watermarking)
+% and \Lpack{flippdf} (print preprocessing) to mention a couple of them.
+%
+% All of these extensions relied on applying modifications to some \LaTeX\
+% internals and as such were prone to subtle interactions with other
+% packages and breakage. The situation has been cleared by the 2020 Fall
+% \LaTeX\ release where an official and generic support for hooks has been
+% introduced.
+%
+% As of today, \Lpack{everypage} can be considered obsolete. It needs to
+% remain around because older releases of \LaTeX\ are still in use and
+% legacy code exist that is based on the interfaces it exposes. However,
+% no new document, class or package should be based on it. Furthermore, it
+% can be expected that existing packages that use \Lpack{everypage} will
+% progressively learn to rely directly on the new \LaTeX\ hook mechanism.
+%
+% This manual is meant to aid the transition by showing how
+% \Lpack{everypage} is now being updated to cater both for older and newer
+% \LaTeX\ kernels. Specifically, it illustrates:
+% \begin{enumerate}
+% \item how \Lpack{everypage} is now actually split in two packages:
+% \Lpack{everypage-1x}, providing the old code base; and
+% \Lpack{everypage} itself, that strives to implement the legacy
+% interface on top of the new mechanisms offered by \LaTeX;
+% \item how \Lpack{everypage} can automatically import the old code base
+% as needed, how loading of the latter can be forced (if absolutely
+% needed or for comparison) and for how long the old code can be
+% expected to keep working with newer releases of \LaTeX;
+% \item how the legacy interface of \Lpack{everypage}, once
+% implemented/emulated on top of the new \LaTeX\ facilities actually
+% differs from its nominal behavior.
+% \end{enumerate}
+%
+% \section{The original code base}
+% \label{sec:original}
+% \changes{R1.0}{2006/06/30}{%
+% Initial release.}
+%
+% The original implementation of \Lpack{everypage}, now available as
+% \Lpack{everypage-1x}, adds two \LaTeX\ hooks that get
+% run when document pages are finalized and output to the dvi or pdf
% file. Specifically, one hook gets executed on every page, while the
% other is executed for the current page. Hook actions are are performed
-% \emph{before} the page is output on the medium, and this is
-% important to be able to play with the page layout or to put things
-% \emph{behind} the page contents (e.g., watermarks such as an image,
-% framing, the ``DRAFT'' word, and the like).
-%
-% The package reminds in some sense \Lpack{bobhook} by Karsten
-% Tinnefeld, but it differs in the way in which the hooks are
-% implemented:
+% \emph{before} the page is output on the medium, and this is important to
+% be able to play with the page layout or to put things \emph{behind} the
+% page contents (e.g., watermarks).
+%
+% \subsection{User interface}
+% \label{ssec:ui}
%
+% \DescribeMacro{\AddEverypageHook} The |\AddEverypageHook| command
+% accepts one argument and adds it to the list of hooks that are run
+% before every page is output. Similarly, the
+% \DescribeMacro{\AddThispageHook}|\AddThispageHook| command accepts one
+% argument, however it adds it to the list of hooks that are run before
+% the \emph{current} page is output.
+%
+% The following rules apply:
+%
% \begin{enumerate}
-% \item there is no formatting inherent in the hooks. If one wants to
-% put some watermark on a page, it is his own duty to put in the
-% hook the code to place the watermark in the right position. Also
-% note that the hooks code should \emph{eat up no space} in the
-% page. Again, if the hooks are meant to place some material on the
-% page, it is the duty of the hook programmer to put code in the
-% hooks to pretend that the material has zero width and zero height.
-% The implementation is \emph{lighter} than the \Lpack{bobhook} one,
-% and possibly more flexible, since one is not limited by any
-% pre-coded formatting for the hooks. On the other hand it is
-% possibly more difficult to use. Nonetheless, it is easy to think
-% of other packages relying on \Lpack{everypage} to deliver more
-% user-friendly and \emph{task specific} interfaces. Already there
-% are a couple of them: the package \Lpack{flippdf} produces
-% mirrored pages in a PDF document and \Lpack{draftwatermark}
-% watermarks document pages.
-% \item similarly to \Lpack{bobhook} and \Lpack{watermark}, the
-% package relies on the manipolatoin of the internal \LaTeX\ macro
-% |\@begindvi| to do the job. However, the redefinition of
-% |\@begindvi| is here postponed as much as possible, striving to
-% avoid interference with other packages using |\AtBeginDvi| or
-% anyway manipulating |\@begindvi|. Specifically \Lpack{everypage}
-% makes no special assumption on the initial code that |\@begindvi|
-% might contain.
+% \item once hooks are introduced and stacked in a series, there is no way
+% to unstack them, nor to clear them;
+% \item in order to have hooks that get run only when specific conditions
+% are met, conditionals must be included in the hooks;
+% \item \label{itm:formatting}%
+% there is no formatting inherent in the hooks. If one wants to put some
+% watermark on a page, it is his own duty to put in the hook the code to
+% place the watermark in the right position and with the appropriate
+% appearance and style. When the hooks are run, the page is still empty,
+% so that one begins filling it at point (1\,inch, 1\,inch) from the top
+% left corner;
+% \item \label{itm:nospace}%
+% the hook code should \emph{eat up no space}. This means that hooks
+% meant to place some material on the page, need to have the material
+% placed in a box with zero width and height beforehand.
+% \item no particular assumption is made on the \LaTeX\ output
+% driver, so \Lpack{everypage} should work equally well with \LaTeX,
+% \hologo{pdfLaTeX}, \hologo{LuaLaTeX}, or \hologo{XeLaTeX}. Similarly,
+% the package should work equally well with dvi, dvips, etc.\@ output
+% drivers. Obviously, the final compatibility with the different output
+% drivers depends on the actual code that is placed in the hooks.
% \end{enumerate}
%
-% Also in some sense \Lpack{everypage} can be related to package
-% \Lpack{everyshi} by Martin Schroeder, but it differs radically from
-% it in the implementation. In fact,\Lpack{everypage} operates by
-% manipulation of the |\@begindvi| macro, rather than at the
-% lower level |\shipout| macro.
-%
-% \section{User interface}
-% \DescribeMacro{\AddEverypageHook}\DescribeMacro{\AddThispageHook}
-% The |\AddEverypageHook| accepts one argument and adds it to the list
-% of hooks that are run before every page is output. The
-% |\AddThispageHook| accepts one argument and adds it to the list of
-% hooks that are run before the current page is output.
-%
-% Note that once hooks are stacked, there is no way to unstack them,
-% nor to clear them. In order to have hooks that get run only when
-% specific conditions are met, conditionals must be included in the
-% hooks.
-%
-% Also note that no particular assumption is made on the \LaTeX\
-% output driver, so \Lpack{everypage} should work equally well with
-% \LaTeX\ and pdf\LaTeX. Furthermore, the package should work equally
-% well with dvi, dvips, etc.\@ output drivers. Obviously, the final
-% compatibility with the different output drivers depends on the
-% actual code that is placed in the hooks.
-%
-% For usage examples, please see the \Lpack{flippdf} and
-% \Lpack{draftwatermark} packages.
+% \subsection{Comparison with other packages}
%
+% The purpose of the original code base is better understood by comparing
+% it to other packages that were meant to solve related problems at the
+% time when \LaTeX\ had no hook mechanism of its own:
+%
+% \begin{itemize}
+% \item In comparison with \Lpack{bobhook} by Karsten Tinnefeld,
+% Lpack{everypage} (in its legacy incarnation) used to differ in purpose
+% and in the hook implementation. Package \Lpack{everypage} was meant to
+% make no assumption on what one could want to do on every page, whether
+% to add text, images, or some low-level instruction for the output
+% driver, or even to perform some accounting task. This made the package
+% lighter and more flexible at the cost of being more difficult to
+% use. In other words, \Lpack{everypage} was meant to be more of a
+% plumbing to be employed in higher level packages;
+% \item in comparison with \Lpack{watermark} by Alexander I.~Rozhenko,
+% similar considerations could me made. Specifically, \Lpack{watermark}
+% is explicitly targeted at making it easy to put watermarks on document
+% pages, while \Lpack{everypage} is lower level.
+% \item in comparison to both \Lpack{bobhook} and \Lpack{watermark},
+% \Lpack{everypage} used to employ a similar low level mechanism, by
+% manipulation of the internal \LaTeX\ macro |\@begindvi| to do the
+% job. However, the redefinition of |\@begindvi| in \Lpack{everypage}
+% was postponed as much as possible, striving to avoid interference with
+% other packages using |\AtBeginDvi| or anyway manipulating
+% |\@begindvi|. Furthermore, \Lpack{everypage} made no special
+% assumption on the initial code that |\@begindvi| might contain.
+% \item in comparison with \Lpack{everyshi} by Martin Schroeder,
+% \Lpack{everypage} used to be similarly low level, but relied on
+% changing the |\@begindvi| macro, rather than the even lower-level
+% |\shipout| macro.
+% \end{itemize}
+%
+% \subsection{Known applications of the \Lpack{everypage} code}
+%
+% Package \Lpack{everypage} has historically found application in at least
+% two higher level packages, namely:
+% \begin{itemize}
+% \item \Lpack{draftwatermark}, meant at providing extended facilities for
+% page watermarking on all \LaTeX\ engines and output drivers; and
+% \item \Lpack{flippdf}, meant at catering for a frequent preprint
+% requirement, where publisher may require a document with
+% \emph{mirrored} pages to get the best results out of a photographic
+% printout process.
+% \end{itemize}
+%
+% \section{The new code base}
+% \changes{R2.0}{2020/10/11}{%
+% Complete package rewrite to take advantage of the new
+% LaTeX hook mechanisms introduced in the Fall 2020 release.}
+%
+% The new code base differs from the old one because it does not touch
+% any \LaTeX\ internals. Conversely it relies on the hook mechanism that
+% is officially provided by \LaTeX\ since its 2020 fall release.
+% Obviously, this has no other purpose than to provide back
+% compatibility for older \LaTeX\ code written before such \LaTeX\
+% release and relying on the original \Lpack{everypage} interfaces.
+%
+% To this aim, the new code base does the following:
+% \begin{enumerate}
+% \item complains out loud, reminding that new code should not be based on
+% \Lpack{everypage}, but rather make direct usage of the new \LaTeX\
+% interfaces;
+% \item checks whether the new \LaTeX\ interfaces are actually
+% available. If this is not the case, it resorts to loading
+% \Lpack{everypage-1x} that provides the old code base;
+% \item \label{itm:addtohook}%
+% implements/emulates the |\AddEverypageHook| and |\AddThispageHook|
+% commands on top of the new |\AddToHook| and |\AddToHookNext| \LaTeX\
+% commands.
+% \end{enumerate}
+%
+% With specific reference to point \ref{itm:addtohook} above, note that
+% the new hook mechanism provided by \LaTeX\ is extensively documented in
+% issue 32 of \emph{\LaTeX\ News} and in file
+% |lthooks-doc.pdf|. Furthermore, consider that \Lpack{everypage} employs
+% hooks in the \emph{shipout} class, which are documented in file
+% |ltshipout-doc.pdf|.
+%
+% \subsection{Compatibility of the new code with the original \Lpack{everypage}
+% interface}
+%
+% Because the implementation is different and due to choices (in fact,
+% quite reasonable ones) by the \LaTeX\ developers, the new implementation
+% of \Lpack{everypage} cannot be exactly equivalent to the original one
+% (hence, please, do not open bugs for this!).
+%
+% The main difference is the hook code provided by the user now gets
+% wrapped in a |\put| command, inside a |picture| environment with
+% |\unitlength| at 1\,pt. This is because \Lpack{everypage} relies on a
+% |shipout/background| type hook. The |\put| command typesets material at
+% (1\,in, -1\,in) to emulate the original coordinate system of
+% \Lpack{everypage}. This means that some of the points about the
+% interface in section~\ref{ssec:ui} do not apply anymore (or at least do
+% not apply in the same way). Specifically, point \ref{itm:formatting}
+% about lack of any pre-canned formatting is not completely true anymore,
+% because of the implicit picture environment. Furthermore, point
+% \ref{itm:nospace} about the need not to eat up space can now be
+% completely ignored.
+%
+% While the changes described above seem to go in the direction of less
+% rules and less concern, this might not be always true and subtle
+% breakage of legacy code may happen in corner cases.
+%
+% \section{Forcing usage of the older code base}
+%
+% The usage of the older code base of \Lpack{everypage} can be forced by
+% simply substituting |\usepackage{everypage-1x}| for
+% |\usepackage{everypage}|. In this case, no warning about the package
+% obsolescence is emitted, because it is assumed that the user knows what
+% he/she is doing. However, explicitly requiring \Lpack{everypage-1x}
+% is obviously discouraged.
+%
+% The old code base actually works just fine with the Fall 2020 \LaTeX\
+% release and it will probably keep to do so for a few more \LaTeX\
+% release cycles. This is mostly up to the \LaTeX\ developers and their
+% will to maintain untouched some internal deprecated interfaces. In any case,
+% |\usepackage{everypage-1x}| will eventually stop working and is now
+% declared in an \emph{unmaintained state}.
+%
+%
% \StopEventually {}
-%
% \section{Implementation}
-%
+% \subsection{Implementation of \Lpack{everypage}}
+% \iffalse
+%<*everypage>
+% \fi
% Announce the name and version of the package, which requires
% \LaTeXe.
% \begin{macrocode}
\NeedsTeXFormat{LaTeX2e}
\ProvidesPackage{everypage}%
- [2007/06/20 1.1 Hooks to run on every page]
+ [2020/10/11 R2.0 Hooks to run on every page]
+% \end{macrocode}
+% Complain out loud about the package being obsolete.
+% \begin{macrocode}
+\PackageWarningNoLine{everypage}{%
+ Functionality similar to this package has recently\MessageBreak
+ been implemented in LaTeX. This package is now in\MessageBreak
+ legacy status.\MessageBreak
+ Please, don't use it in new documents and packages}
+% \end{macrocode}
+% Depending on the actual functionalities provided by \LaTeX\ consider
+% loading \Lpack{everypage-1x}. If so doing, warn about this too and
+% stop. Otherwise give some more warnings.
+% \begin{macrocode}
+\@ifundefined{AddToHook}{%
+ \PackageWarningNoLine{everypage}{%
+ You appear to be running a version of LaTeX\MessageBreak
+ too old to provide the new functionality.\MessageBreak
+ Forcing fallback to `everypage-1x` that\MessageBreak
+ uses an older code base}
+ \RequirePackage{everypage-1x}
+ \endinput}{%
+ \PackageWarningNoLine{everypage}{%
+ You appear to be running a version of LaTeX\MessageBreak
+ providing the new functionality.\MessageBreak
+ Doing the best to deliver the original `everypage`\MessageBreak
+ interface on top of it. Strict equivalence is\MessageBreak
+ not possible, breakage may occur.\MessageBreak
+ If truly needed, Use `everypage-1x` to force the\MessageBreak
+ loading of an older code base}}
+% \end{macrocode}
+% \begin{macro}{\AddEverypageHook}\begin{macro}{\AddThispageHook}%
+% Finally, implement the \Lpack{everypage} interface on top of the \LaTeX\
+% |shipout/background| hooks.
+% \begin{macrocode}
+\newcommand*{\AddEverypageHook}[1]{%
+ \AddToHook{shipout/background}{\put(1in,-1in){#1}}}
+\newcommand*{\AddThispageHook}[1]{%
+ \AddToHookNext{shipout/background}{\put(1in,-1in){#1}}}
+% \end{macrocode}
+% \end{macro}\end{macro}
+% \iffalse
+%</everypage>
+% \fi
+%
+% \subsection{Implementation of \Lpack{everypage-1x}}
+% \iffalse
+%<*everypage-1x>
+% \fi
+% Announce the name and version of the package, which requires
+% \LaTeXe.
+% \begin{macrocode}
+\NeedsTeXFormat{LaTeX2e}
+\ProvidesPackage{everypage-1x}%
+ [2020/10/10 1.2 Hooks to run on every page]
% \end{macrocode}
%
% \begin{macro}{\sc@everypage@hook}\begin{macro}{\sc@everypage@hook}
@@ -191,6 +423,11 @@
% \end{macro}
%
% \begin{macro}{\sc@op@preamble}
+% \changes{R1.1}{2007/06/20}{%
+% Fix an out of memory condition.}
+% \changes{R1.2}{2020/10/10}{%
+% Reorder operations to take care of code to execute at the beginning of
+% the output before the `everypage' hooks.}
% The outputpage preamble contains instructions to redefine the
% |\@begindvi| macro that is called at every page output by the
% original |\@outputpage| code.
@@ -201,10 +438,10 @@
\newcommand*{\sc@op@preamble}{%
\let\sc@begindvi\@begindvi
\def\@begindvi{%
+ \sc@begindvi
\sc@everypage@hook
\sc@thispage@hook
- \gdef\sc@thispage@hook{}
- \sc@begindvi}}
+ \gdef\sc@thispage@hook{}}}
% \end{macrocode}
% \end{macro}
%
@@ -230,31 +467,33 @@
% other packages are loaded.
% \begin{macrocode}
\AtBeginDocument{\sc@ep@init}
-\endinput
% \end{macrocode}
+% \iffalse
+%</everypage-1x>
+% \fi
%
% \Finale
+% \PrintChanges
% \PrintIndex
%
-%% \CharacterTable
-%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
-%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
-%% Digits \0\1\2\3\4\5\6\7\8\9
-%% Exclamation \! Double quote \" Hash (number) \#
-%% Dollar \$ Percent \% Ampersand \&
-%% Acute accent \' Left paren \( Right paren \)
-%% Asterisk \* Plus \+ Comma \,
-%% Minus \- Point \. Solidus \/
-%% Colon \: Semicolon \; Less than \<
-%% Equals \= Greater than \> Question mark \?
-%% Commercial at \@ Left bracket \[ Backslash \\
-%% Right bracket \] Circumflex \^ Underscore \_
-%% Grave accent \` Left brace \{ Vertical bar \|
-%% Right brace \} Tilde \~}
+% \CharacterTable
+% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+% Digits \0\1\2\3\4\5\6\7\8\9
+% Exclamation \! Double quote \" Hash (number) \#
+% Dollar \$ Percent \% Ampersand \&
+% Acute accent \' Left paren \( Right paren \)
+% Asterisk \* Plus \+ Comma \,
+% Minus \- Point \. Solidus \/
+% Colon \: Semicolon \; Less than \<
+% Equals \= Greater than \> Question mark \?
+% Commercial at \@ Left bracket \[ Backslash \\
+% Right bracket \] Circumflex \^ Underscore \_
+% Grave accent \` Left brace \{ Vertical bar \|
+% Right brace \} Tilde \~}
\endinput
-%%% Local Variables:
-%%% mode: doctex
-%%% TeX-master: t
-%%% End:
-
+% %% Local Variables:
+% %% mode: doctex
+% %% TeX-master: t
+% %% End: \ No newline at end of file
diff --git a/Master/texmf-dist/source/latex/everypage/everypage.ins b/Master/texmf-dist/source/latex/everypage/everypage.ins
index 9131ac42697..2da7b69a6e9 100644
--- a/Master/texmf-dist/source/latex/everypage/everypage.ins
+++ b/Master/texmf-dist/source/latex/everypage/everypage.ins
@@ -1,5 +1,5 @@
%% everypage.ins
-%% Copyright 2006
+%% Copyright 2006-2007, 2020
%% Sergio Callegari <sergio.callegari@gmail.com>
%%
%% ---------------------------------------------
@@ -25,17 +25,14 @@
%% --------------- start of docstrip commands ------------------
%%
\input docstrip.tex
-\preamble
-This is file `everypage.sty',
-generated with the docstrip utility.
-The original source files were:
+\usedir{tex/latex/everypage}
-everypage.dtx
+\preamble
- IMPORTANT NOTICE:
+IMPORTANT NOTICE:
-Copyright 2006
+Copyright 2006-2007, 2020
Sergio Callegari <sergio.callegari@gmail.com>
---------------------------------------------
@@ -43,25 +40,27 @@ This file is part of the everypage package,
a contribution to the LaTeX2e system.
---------------------------------------------
-This program consists of the files listed in the README file included
-in the package.
+This program consists of the files listed in the README.md file included in
+the package.
Any modified versions of this file must be renamed with new filenames
-distinct from everypage.sty.
+distinct from \outFileName.
-For distribution of the original source see the terms
-for copying and modification in the file everypage.dtx.
+For distribution of the original source see the terms for copying and
+modification in the file \inFileName.
-This generated file may be distributed as long as the
-original source files, as listed above, are part of the
-same distribution. (The sources need not necessarily be
-in the same archive or directory.)
+This generated file may be distributed as long as the original source files,
+as listed above, are part of the same distribution. (The sources need not
+necessarily be in the same archive or directory.)
\endpreamble
\keepsilent
\Msg{*** Generating the LaTeX2e package files ***}
-\generate{\file{everypage.sty}{\from{everypage.dtx}{}}}
+
+\generate{\file{everypage.sty}{\from{everypage.dtx}{everypage}}}
+\generate{\file{everypage-1x.sty}{\from{everypage.dtx}{everypage-1x}}}
+
\ReportTotals
\Msg{***********************************************************}
@@ -70,15 +69,17 @@ in the same archive or directory.)
\Msg{* file(s) into a directory searched by TeX:}
\Msg{*}
\Msg{* \space\space everypage.sty}
+\Msg{* \space\space everypage-070620.sty}
\Msg{*}
\Msg{*}
-\Msg{* To produce the documentation run the files ending with}
-\Msg{* `.dtx' through LaTeX (or maybe pdfLaTeX).}
-\Msg{* Process any name.idx file by:}
-\Msg{* \space\space\space\space makeindex -s gind.ist name}
-\Msg{* Process any name.glo file by:}
-\Msg{* \space\space\space\space makeindex -s gglo.ist -o name.gls name.glo}
-\Msg{* Re run through LaTeX the .dtx files as necessary}
+\Msg{* To produce the documentation:}
+\Msg{* - run everypage.dtx through LaTeX}
+\Msg{* - Process everypage.idx by:}
+\Msg{* \space\space\space\space makeindex -s gind.ist everypage}
+\Msg{* - Process any everypage.glo by:}
+\Msg{* \space\space\space\space
+ makeindex -s gglo.ist -o everypage.gls everypage.glo}
+\Msg{* Re run through LaTeX everypage.dtx as necessary}
\Msg{*}
\Msg{***********************************************************}