diff options
Diffstat (limited to 'Master/texmf-dist/source/latex/regstats/regstats.dtx')
| -rw-r--r-- | Master/texmf-dist/source/latex/regstats/regstats.dtx | 348 |
1 files changed, 251 insertions, 97 deletions
diff --git a/Master/texmf-dist/source/latex/regstats/regstats.dtx b/Master/texmf-dist/source/latex/regstats/regstats.dtx index e25d3b08b25..b05dcda2c73 100644 --- a/Master/texmf-dist/source/latex/regstats/regstats.dtx +++ b/Master/texmf-dist/source/latex/regstats/regstats.dtx @@ -1,7 +1,7 @@ % \iffalse meta-comment % % File: regstats.dtx -% Version: 2011/05/16 v1.0b +% Version: 2011/06/18 v1.0d % % Copyright (C) 2011 by % H.-Martin M"unch <Martin dot Muench at Uni-Bonn dot de> @@ -80,7 +80,7 @@ \input docstrip.tex \Msg{******************************************************************} \Msg{* Installation} -\Msg{* Package: regstats 2011/05/16 v1.0b Counting used registers (HMM)} +\Msg{* Package: regstats 2011/06/18 v1.0d Counting used registers (HMM)} \Msg{******************************************************************} \keepsilent @@ -92,7 +92,7 @@ This is a generated file. Project: regstats -Version: 2011/05/16 v1.0b +Version: 2011/06/18 v1.0d Copyright (C) 2011 by H.-Martin M"unch <Martin dot Muench at Uni-Bonn dot de> @@ -176,13 +176,13 @@ and the derived files %<*driver> \NeedsTeXFormat{LaTeX2e}[2009/09/24] \ProvidesFile{regstats.drv}% - [2011/05/16 v1.0b Counting used registers (HMM)]% + [2011/06/18 v1.0d Counting used registers (HMM)]% \documentclass{ltxdoc}[2007/11/11]% v2.0u \usepackage{pdflscape}[2008/08/11]% v0.10 \usepackage{holtxdoc}[2011/02/04]% v0.21 %% regstats may work with earlier versions of LaTeX2e and those -%% class and package, but this was not tested. -%% Please consider updating your LaTeX, class, and package +%% class and packages, but this was not tested. +%% Please consider updating your LaTeX, class, and packages %% to the most recent version (if they are not already the most %% recent version). \hypersetup{% @@ -213,7 +213,7 @@ and the derived files % % \fi % -% \CheckSum{422} +% \CheckSum{511} % % \CharacterTable % {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z @@ -250,11 +250,12 @@ and the derived files % % \DoNotIndex{\\} % \DoNotIndex{\documentclass,\usepackage,\ProvidesPackage,\begin,\end} +% \DoNotIndex{\message,\MessageBreak} % \DoNotIndex{\NeedsTeXFormat,\DoNotIndex,\verb} % \DoNotIndex{\def,\edef,\gdef,\global} % \DoNotIndex{\ifx,\kvoptions,\listfiles,\mathord,\mathrm,\ProcessKeyvalOptions} % \DoNotIndex{\SetupKeyvalOptions} -% \DoNotIndex{\bigskip,\space,\thinspace,\Large,\linebreak,\lipsum,\MessageBreak} +% \DoNotIndex{\bigskip,\space,\thinspace,\Large,\linebreak,\lipsum} % \DoNotIndex{\ldots,\indent,\noindent,\newline,\pagebreak,\pagenumbering} % \DoNotIndex{\textbf,\textit,\textsf,\texttt,\textquotedblleft,\textquotedblright} % \DoNotIndex{\plainTeX,\TeX,\LaTeX,\pdfLaTeX} @@ -262,7 +263,7 @@ and the derived files % \DoNotIndex{\value,\setcounter,\addtocounter,\arabic,\csname,\endscname} % % \title{The \xpackage{regstats} package} -% \date{2011/05/16 v1.0b} +% \date{2011/06/18 v1.0d} % \author{H.-Martin M\"{u}nch\\\xemail{Martin.Muench at Uni-Bonn.de}} % % \maketitle @@ -272,6 +273,7 @@ and the derived files % (counter, dimen, skip, muskip, box, token, input, output, % math families, languages, insertions) % and compare these to the maximum available number of such registers. +% The time needed for a compilation run can be anounced. % \end{abstract} % % \bigskip @@ -288,11 +290,11 @@ and the derived files % $2\unit{g}$ CO$_{2}$ and $2\unit{g}$ wood:\\ % Therefore please print only if this is really necessary.} % -% \bigskip +% \pagebreak % % \tableofcontents % -% \pagebreak +% \bigskip % % \section{Introduction} % @@ -300,14 +302,16 @@ and the derived files % (counter, dimen, skip, muskip, box, token, input, output, % math families, languages, insertions). % Therefore the according |\count| is read. While |\count10| should be the number -% of the counters, |\count11| the one of the dimens and so on, it is possible to use +% of the counters, |\count11| the one of the dimens, and so on, it is possible to use % option |proof|, in which case a new one of each register is used and looked at % |\the\allocationnumber|, and this is compared to the number determined by reading % the |\count|. The result for each register is compared to the maximum available % number of the respective register -% (comparison independent of usage of option |proof|).\\ +% (comparison independent of usage of option |proof|). +% With option |left| additionally the number of remaining registers of each type +% is given, and with option |timer| the time needed for the compilation run. % -% \bigskip +% \pagebreak % % \section{Usage} % @@ -315,21 +319,34 @@ and the derived files % \begin{quote} % |\usepackage[<|\textit{options}|>]{regstats}| % \end{quote} -% \noindent in the preamble of your \LaTeXe\ source file. The resulting message -% will be presented at the end of the compilation messages at the screen and in -% the \xfile{log} file. +% \noindent at the end of the preamble of your \LaTeXe\ source file. When you load +% packages |\AtBeginDocument|, \xpackage{regstats} should be the last one of +% those packages. The resulting message will be presented at the end of the +% compilation messages at the screen and in the \xfile{log} file. % -% \subsection{Option} -% \DescribeMacro{option} -% \indent The \xpackage{regstats} package takes the following option: +% \subsection{Options} +% \DescribeMacro{options} +% \indent The \xpackage{regstats} package takes the following options: % % \subsubsection{proof\label{sss:proof}} % \DescribeMacro{proof} -% \indent When option \texttt{proof} (or \texttt{proof=true}) is choosen, +% \indent When option \texttt{proof} (or \texttt{proof=true}) is chosen, % a new one of each register is used and looked at |\the\allocationnumber|, % and this is compared to the number determined by reading the |\count|. % The default is \texttt{proof=false}. % +% \subsubsection{left\label{sss:left}} +% \DescribeMacro{left} +% \indent When option \texttt{left} (or \texttt{left=true}) is chosen, +% also the number of remaining registers of each type is given. The default +% is \texttt{left=false}. +% +% \subsubsection{timer\label{sss:timer}} +% \DescribeMacro{timer} +% \indent When option \texttt{timer} (or \texttt{timer=true}) is chosen, +% also the the time needed for the compilation run is given. The default +% is \texttt{timer=false}. +% % \section{Alternatives\label{sec:Alternatives}} % % \begin{description} @@ -339,13 +356,15 @@ and the derived files % |\AtBeginDocument| and |\AtEndDocument| (but not |\AtVeryVeryEnd|). The number of % allocated insertions is \emph{wrong} in my opinion, because these are not numbered % $1, 2,\ldots$, but start at a high number, which is then decreased. The package is -% compatibel with the \xpackage{regstats} package (i.\,e. you can use both at the same -% time in one document) and available at \url{http://www.ctan.org/pkg/regcount}. +% compatibel with the \xpackage{regstats} package (i.\,e.~you can use both packages +% at the same time in one document) and available at +% \url{http://www.ctan.org/pkg/regcount}. % % \item[-] One can manually search for the last appearance of % |\count|, |\dimen|, |\skip|, |\muskip|, |\box|, |\toks|, |\read| (input), % |\write| (output), |\mathgroup| (math familiy), |\language|, and |\insert|, -% and find the according number there. +% and find the according number there. (This does not provide any information +% about the number of remaining registers, of course.) % \end{description} % % \bigskip @@ -364,6 +383,8 @@ and the derived files %<*example> \documentclass[british]{article}[2007/10/19]% v1.4h %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% \usepackage{etex}[1998/03/26]% v2.0 +%% Uncomment the preceding line, if you want to use eTeX. \usepackage{hyperref}[2011/04/17]% v6.82g \hypersetup{extension=pdf,% plainpages=false,% @@ -378,7 +399,7 @@ and the derived files pdfview=Fit,pdfstartview=Fit,% pdfpagelayout=SinglePage% } -\usepackage[proof=false]{regstats}[2011/05/16]% v1.0b +\usepackage[proof=false,left=true,timer=true]{regstats}[2011/06/18]% v1.0d \gdef\unit#1{\mathord{\thinspace\mathrm{#1}}}% \listfiles \begin{document} @@ -386,9 +407,19 @@ and the derived files \section*{Example for regstats} This example demonstrates the use of package\newline -\textsf{regstats}, v1.0b as of 2011/05/16 (HMM).\newline -The used option was \texttt{proof=false}. -This is the default option. +\textsf{regstats}, v1.0d as of 2011/06/18 (HMM).\newline +The used options were \texttt{proof=false,left=true,timer=true}.\newline +\texttt{proof=false} is the default, but neither \texttt{left=true} +nor \texttt{timer=true} are defaults (\texttt{left=false,timer=false} +would be the defaults).\newline + +If $\varepsilon$-\TeX\ is available with your \LaTeX -distribution +and you want to use it, uncomment the\newline +\verb|%% \usepackage{etex}[1998/03/26]% v2.0|\newline +line in the preamble of this document.\newline +(Also \verb|\eTeX| instead of \verb|$\varepsilon$-\TeX| +would be available with it).\newline + For more details please see the documentation!\newline \noindent Save per page about $200\unit{ml}$ water, @@ -398,6 +429,9 @@ Therefore please print only if this is really necessary.\newline For the resulting message, please compile regstats-example.tex and have a look at the end of the log-file. +Because the compilation time for this example is usually quite short, +option \texttt{timer} is not demonstrated very spectacular. + \end{document} %</example> % \end{macrocode} @@ -417,7 +451,7 @@ have a look at the end of the log-file. % % \begin{macrocode} \NeedsTeXFormat{LaTeX2e}[2009/09/24] -\ProvidesPackage{regstats}[2011/05/16 v1.0b +\ProvidesPackage{regstats}[2011/06/18 v1.0d Counting used registers (HMM)] % \end{macrocode} @@ -453,47 +487,98 @@ have a look at the end of the log-file. % % \indent See subsection~\ref{ss:Downloads} about how to get them.\\ % -% We process the option: +% We process the options: % % \begin{macrocode} \SetupKeyvalOptions{family=regstats,prefix=regstats@} \DeclareBoolOption{proof}% \regstats@proof +\DeclareBoolOption{left} +\DeclareBoolOption{timer} + \ProcessKeyvalOptions* +\ifregstats@proof + \PackageInfo{regstats}{% + This package will use one of each kind of register itself!\MessageBreak% + (And other packages used by this package\MessageBreak% + probably use additional resources,\MessageBreak% + if those packages are not used anyway.)\MessageBreak% + } +\else + \PackageInfo{regstats}{% + This package will use one counter itself!\MessageBreak% + (And other packages used by this package\MessageBreak% + probably use additional resources,\MessageBreak% + if those packages are not used anyway.)\MessageBreak% + } +\fi + % \end{macrocode} % -% We try to determine, whether \eTeX\ is available: +% But that counter will be created not before |\AtVeryVeryEnd|, +% therefore if it is the one counter too much, it should not +% interfere with the creation of the document. (The other kinds +% of registers are used not before |\AtVeryVeryEnd|, too.)\\ % % \begin{macrocode} -\newif\ifetex -\begingroup\expandafter\expandafter\expandafter\endgroup -\expandafter\ifx\csname eTeXversion\endcsname\relax - \etexfalse -\else - \etextrue +\ifregstats@timer + \RequirePackage{intcalc}[2007/09/27]% v1.1 \fi -\ifetex - \PackageInfo{regstats}{e-TeX found.} -\else - \PackageWarning{regstats}{Could not find e-TeX.\MessageBreak% - That can mean that e-TeX was disabled or\MessageBreak% - that your distribution of TeX does not contain e-TeX.\MessageBreak% - Some packages will not work without e-TeX,\MessageBreak% - but should give according messages.\MessageBreak% - } -\fi +% \end{macrocode} +% +% We try to determine, whether \eTeX\ is available in the +% \LaTeX\ distribution used to compile the document +% and really loaded by the user. Because it is possible to +% load packages |\AtBeginDocument|, but |\@ifpackageloaded| +% cannot be used after |\AtBeginDocument|, we check for +% \eTeX\ |\AtBeginDocument| (and herewith ask the user +% to please load \xpackage{regstats} as very last package, +% at least after the \xpackage{etex} package): +% +% \begin{macrocode} +\AtBeginDocument{% + \newif\ifetex + \begingroup\expandafter\expandafter\expandafter\endgroup + \expandafter\ifx\csname eTeXversion\endcsname\relax + \etexfalse + \else + \@ifpackageloaded{etex}{\etextrue}{\etexfalse} + \fi + \ifetex + \PackageInfo{regstats}{e-TeX found.} + \else + \PackageWarning{regstats}{Could not find e-TeX.\MessageBreak% + That can mean that e-TeX was disabled or\MessageBreak% + that your distribution of TeX does not contain e-TeX\MessageBreak% + or that you forgot to say \string\usepackage{etex}\MessageBreak% + in the preamble of \jobname.tex.\MessageBreak% + Some packages will not work without e-TeX,\MessageBreak% + but should give according messages.\MessageBreak% + } + \fi + } % \end{macrocode} % % |\AtVeryEndDocument| we write to |\AtVeryVeryEnd|, thus the code will be executed -% quite late during the compilation. We define a new command to determine the -% sigular/plural form. +% quite late during the compilation. (Please load \xpackage{regstats} as very last +% package!) We define a new command to determine the sigular/plural form, +% maximum of available registers, and (if option |left| was chosen) +% the number of remaining registers of that type. % % \begin{macrocode} \AtVeryEndDocument{% \AtVeryVeryEnd{% - \newcommand{\regstats@s}[3]{% + \def\regstats@lft{}% + \newcommand{\regstats@regstat}[5]{% +% \end{macrocode} +% +% The five parameters are: number of used registers of that type, +% singular ending, plural ending, number of available registers without \eTeX{}, +% number of availabe registers with \eTeX\ (in this order). +% +% \begin{macrocode} \setcounter{regstatscount}{#1} \ifnum \value{regstatscount}=0 \setcounter{regstatscount}{2} @@ -503,12 +588,31 @@ have a look at the end of the log-file. \else \gdef\regstats@pl{#2} \fi - } + \ifetex\edef\regstats@max{#5}\else\edef\regstats@max{#4}\fi + \ifregstats@left + \setcounter{regstatscount}{\regstats@max} + \addtocounter{regstatscount}{-#1} + \ifnum \value{regstatscount}>0 + \edef\regstats@lft{, left: \arabic{regstatscount}} + \else + \ifnum \value{regstatscount}=0 + \edef\regstats@lft{, left: \arabic{regstatscount} !!!} + \else% \value{regstatscount}<0 + \edef\regstats@lft{, left: \arabic{regstatscount} **********} + \fi + \fi +% \end{macrocode} +% +% | \else| |\regstats@lft| will stay |\empty|. +% +% \begin{macrocode} + \fi + } \newcounter{regstatscount} \edef\regstats@counter{\the\allocationnumber} % \end{macrocode} % -% When option |proof| was choosen, a new register of the named types is used +% When option |proof| was chosen, a new register of the named types is used % and its number compared with the according |count| number. % We give a warning about the use of additional registers. % @@ -516,8 +620,8 @@ have a look at the end of the log-file. \ifregstats@proof \PackageWarning{regstats}{% Package regstats loaded with option 'proof'.\MessageBreak% - This package itself will use one of each register\MessageBreak% - for testing!% + This package itself will now use\MessageBreak% + one of each register for testing!% }% \def\regstats@proof{1} \edef\regstats@test{\the\count10} @@ -546,11 +650,6 @@ have a look at the end of the log-file. \else \message{Discrepancy when counting muskip registers.^^J} \def\regstats@proof{0} \fi -% \end{macrocode} -% -% \pagebreak -% -% \begin{macrocode} \newbox\regstatsbox \edef\regstats@box{\the\allocationnumber} \edef\regstats@test{\the\count14} @@ -608,16 +707,14 @@ have a look at the end of the log-file. \edef\regstats@test{0} \ifx\regstats@proof\regstats@test \message{Regstats test for register numbers failed.^^J} - \message{Therefore option 'proof' is necessary to get the right numbers.^^J} + \message{Therefore option 'proof' is necessary to get the % + right numbers.^^J} \fi + \else % \end{macrocode} % % \pagebreak % -% \begin{macrocode} - \else -% \end{macrocode} -% % Without option |proof|, we just take the values of the various |count|s. % % \begin{macrocode} @@ -649,34 +746,76 @@ have a look at the end of the log-file. % The number of used registers of each type and the number of available ones % (estimated, probably dependent on distribution and its version, here just % distinguished according to availability of \eTeX{}) is written to screen -% and \xfile{log} file. +% and \xfile{log} file. (Additional spaces are just for increased ease of +% readability of the code and will appear neither at the scree output nor +% in the \xfile{log}~file.) % % \begin{macrocode} \message{^^J} \message{Here is how much of TeX's registers you used^^J}% \message{\space (numbers of available registers are estimated!):^^J}% - \regstats@s{\regstats@counter}{}{s} - \message{ \regstats@counter\space counter register\regstats@pl\space out of}\ifetex\message{32767}\else\message{233}\fi - \regstats@s{\regstats@dimen}{}{s} - \message{^^J \regstats@dimen\space dimen register\regstats@pl\space out of}\ifetex\message{32767}\else\message{233}\fi - \regstats@s{\regstats@skip}{}{s} - \message{^^J \regstats@skip\space skip register\regstats@pl\space out of 233} - \regstats@s{\regstats@muskip}{}{s} - \message{^^J \regstats@muskip\space muskip register\regstats@pl\space out of}\ifetex\message{32767}\else\message{255}\fi - \regstats@s{\regstats@box}{}{s} - \message{^^J \regstats@box\space box register\regstats@pl\space out of}\ifetex\message{32767}\else\message{233}\fi - \regstats@s{\regstats@toks}{}{s} - \message{^^J \regstats@toks\space toks register\regstats@pl\space out of}\ifetex\message{32767}\else\message{255}\fi - \regstats@s{\regstats@read}{}{s} - \message{^^J \regstats@read\space input stream\regstats@pl\space (read) out of 15} - \regstats@s{\regstats@write}{}{s} - \message{^^J \regstats@write\space output stream\regstats@pl\space (write) out of 15} - \regstats@s{\regstats@fam}{y}{ies} - \message{^^J \regstats@fam\space math famil\regstats@pl\space (fam) out of 15} - \regstats@s{\regstats@language}{}{s} - \message{^^J \regstats@language\space language code\regstats@pl\space out of 255} - \regstats@s{\regstats@insert}{}{s} - \message{^^J \regstats@insert\space insertion\regstats@pl\space out of}\ifetex\message{124^^J}\else\message{101^^J}\fi + \regstats@regstat{\regstats@counter}{}{s}{233}{32767} + \message{ \regstats@counter\space counter register\regstats@pl\space out of \regstats@max \regstats@lft ^^J} + \regstats@regstat{\regstats@dimen}{}{s}{233}{32767} + \message{ \regstats@dimen\space dimen register\regstats@pl\space out of \regstats@max \regstats@lft ^^J} + \regstats@regstat{\regstats@skip}{}{s}{233}{32767} + \message{ \regstats@skip\space skip register\regstats@pl\space out of \regstats@max \regstats@lft ^^J} + \regstats@regstat{\regstats@muskip}{}{s}{255}{32767} + \message{ \regstats@muskip\space muskip register\regstats@pl\space out of \regstats@max \regstats@lft ^^J} + \regstats@regstat{\regstats@box}{}{s}{233}{32767} + \message{ \regstats@box\space box register\regstats@pl\space out of \regstats@max \regstats@lft ^^J} + \regstats@regstat{\regstats@toks}{}{s}{255}{32767} + \message{ \regstats@toks\space toks register\regstats@pl\space out of \regstats@max \regstats@lft ^^J} + \regstats@regstat{\regstats@read}{}{s}{15}{15} + \message{ \regstats@read\space input stream\regstats@pl\space (read) out of \regstats@max \regstats@lft ^^J} + \regstats@regstat{\regstats@write}{}{s}{15}{15} + \message{ \regstats@write\space output stream\regstats@pl\space (write) out of \regstats@max \regstats@lft ^^J} + \regstats@regstat{\regstats@fam}{y}{ies}{15}{15} + \message{ \regstats@fam\space math famil\regstats@pl\space (fam) out of \regstats@max \regstats@lft ^^J} + \regstats@regstat{\regstats@language}{}{s}{255}{255} + \message{ \regstats@language\space language code\regstats@pl\space out of \regstats@max \regstats@lft ^^J} + \regstats@regstat{\regstats@insert}{}{s}{101}{124} + \message{ \regstats@insert\space insertion\regstats@pl\space out of \regstats@max \regstats@lft ^^J} +% \end{macrocode} +% +% \pagebreak +% \end{landscape} +% +% When option |timer| (or |timer=true|) was used, the \xpackage{regstats} package +% additionally gives the time, which was needed for the compilation. +% If~|\pdfelapsedtime| was reset by another package, the result is not correct, +% of course, but unfortunately it is not possible to check for this. You could say +% |\def\pdfresettimer{\relax}| immediately after |\documentclass[...]{...}| +% to prevent this. Better use\\ +% |\long\def\pdfresettimer{%|\\ +% \ |\PackageError{regstats}{\string\pdfresettimer\space used}}|\\ +% to be notified thereof. This redefinition could be implemented in this +% \xpackage{regstats} package, but this would have no effect for the use of +% |\pdfresettimer| before this package is called. Because this package +% should be called immediately before |\begin{document}|, this would mean +% that resetting would be possible during the whole loading of all packages. +% +% \begin{macrocode} + \ifregstats@timer + \message{^^J} + \setcounter{regstatscount}{\the\pdfelapsedtime} + \edef\regstatselapsedtime{\arabic{regstatscount}} + \divide \value{regstatscount} by 65536% scaledseconds -> seconds + \edef\regstatsseconds{\arabic{regstatscount}} + \ifnum \value{regstatscount} > 59 + \edef\regstatsseconds{\intcalcMod{\value{regstatscount}}{60}} + \divide \value{regstatscount} by 60% seconds -> minutes + \else + \setcounter{regstatscount}{0}% minutes = 0 + \fi + \ifnum \regstatsseconds < 10 + \message{Time elapsed: about \arabic{regstatscount}:0\regstatsseconds% + \space (m:ss; \regstatselapsedtime /65536 s).^^J} + \else + \message{Time elapsed: about \arabic{regstatscount}:\regstatsseconds % + \space (m:ss; \regstatselapsedtime /65536 s).^^J} + \fi + \fi } } @@ -688,8 +827,6 @@ have a look at the end of the log-file. %</package> % \end{macrocode} % -% \end{landscape} -% % \newpage % % \section{Installation} @@ -729,6 +866,13 @@ have a look at the end of the log-file. % \CTAN{macros/latex/contrib/oberdiek/atveryend.dtx} % \end{description} % +% When option |timer| is used, additionally +% \begin{description} +% \item[-] package \xpackage{intcalc}, 2007/09/27, v1.1,\\ +% \CTAN{macros/latex/contrib/oberdiek/intcalc.dtx} +% \end{description} +% is needed.\\ +% % \DescribeMacro{regstats-example.tex} % The \texttt{regstats-example.tex} requires the same files as all % documents using the \xpackage{regstats} package, i.\,e. the ones @@ -737,7 +881,7 @@ have a look at the end of the log-file. % \item[-] class \xpackage{article}, 2007/10/19, v1.4h, from \xpackage{classes.dtx}:\\ % \CTAN{macros/latex/base/classes.dtx} % -% \item[-] package \xpackage{regstats}, 2011/05/16, v1.0b,\\ +% \item[-] package \xpackage{regstats}, 2011/06/18, v1.0d,\\ % \CTAN{macros/latex/contrib/regstats/regstats.dtx}\\ % (Well, it is the example file for this package, and because you are reading the % documentation for the \xpackage{regstats} package, it can be assumed that you already @@ -755,16 +899,16 @@ have a look at the end of the log-file. % \DescribeMacro{holtxdoc} % \DescribeMacro{kvoptions} % \DescribeMacro{atveryend} +% \DescribeMacro{intcalc} % \DescribeMacro{pdflscape} % All packages of \textsc{Heiko Oberdiek's} bundle `oberdiek' -% (especially \xpackage{holtxdoc}, \xpackage{kvoptions}, \xpackage{atveryend}, and \xpackage{pdflscape}) +% (especially \xpackage{holtxdoc}, \xpackage{kvoptions}, \xpackage{atveryend}, +% \xpackage{intcalc}, and \xpackage{pdflscape}) % are also available in a TDS compliant ZIP archive:\\ % \CTAN{install/macros/latex/contrib/oberdiek.tds.zip}.\\ % It is probably best to download and use this, because the packages in there % are quite probably both recent and compatible among themselves.\\ % -% \pagebreak -% % \DescribeMacro{hyperref} % \noindent \xpackage{hyperref} is not included in that bundle and needs to be downloaded % separately,\\ @@ -940,15 +1084,14 @@ have a look at the end of the log-file. % % \section{Acknowledgements} % -% I would like to thank \textsc{Heiko Oberdiek} -% (heiko dot oberdiek at googlemail dot com) for providing +% I would like to thank \textsc{Heiko Oberdiek} for providing % the \xpackage{hyperref} as well as a~lot~(!) of other useful packages % (from which I also got everything I know about creating a file in % \xext{dtx} format, ok, say it: copying), % \textsc{Jean-Pierre F. Drucbert} for his \xpackage{regcount} package, % \textsc{Robin Fairbairns} for pointing me to the \xpackage{regcount} package, % and the \Newsgroup{comp.text.tex} and \Newsgroup{de.comp.text.tex} -% newsgroups for their help in all things \TeX. +% newsgroups for their help in all things \TeX{}. % % \pagebreak % @@ -966,6 +1109,17 @@ have a look at the end of the log-file. % \item Option |proof| added. % \item Diverse details. % \end{Version} +% \begin{Version}{2011/06/08 v1.0c} +% \item Bug Fix: Number of available |\skip| registers with \eTeX. +% \item Change in \eTeX -detection. +% \item New option |left|. +% \item Minor details. +% \end{Version} +% \begin{Version}{2011/06/18 v1.0d} +% \item Bug Fix: Information about used registers/counter fixed. +% \item New option |timer|. +% \item Some details. +% \end{Version} % \end{History} % % \bigskip @@ -973,7 +1127,7 @@ have a look at the end of the log-file. % When you find a mistake or have a suggestion for an improvement of this package, % please send an e-mail to the maintainer, thanks! (Please see BUG REPORTS in the README.) % -% \bigskip +% \pagebreak % % \PrintIndex % |