diff options
Diffstat (limited to 'Master/texmf-dist/source/latex/oberdiek/pdfcolparcolumns.dtx')
-rw-r--r-- | Master/texmf-dist/source/latex/oberdiek/pdfcolparcolumns.dtx | 686 |
1 files changed, 686 insertions, 0 deletions
diff --git a/Master/texmf-dist/source/latex/oberdiek/pdfcolparcolumns.dtx b/Master/texmf-dist/source/latex/oberdiek/pdfcolparcolumns.dtx new file mode 100644 index 00000000000..c52373c9e25 --- /dev/null +++ b/Master/texmf-dist/source/latex/oberdiek/pdfcolparcolumns.dtx @@ -0,0 +1,686 @@ +% \iffalse meta-comment +% +% Copyright (C) 2007 by Heiko Oberdiek <oberdiek@uni-freiburg.de> +% +% This work may be distributed and/or modified under the +% conditions of the LaTeX Project Public License, either +% version 1.3 of this license or (at your option) any later +% version. The latest version of this license is in +% http://www.latex-project.org/lppl.txt +% and version 1.3 or later is part of all distributions of +% LaTeX version 2005/12/01 or later. +% +% This work has the LPPL maintenance status "maintained". +% +% This Current Maintainer of this work is Heiko Oberdiek. +% +% This work consists of the main source file pdfcolparcolumns.dtx +% and the derived files +% pdfcolparcolumns.sty, pdfcolparcolumns.pdf, pdfcolparcolumns.ins, pdfcolparcolumns.drv, +% pdfcolparcolumns-test1.tex. +% +% Distribution: +% CTAN:macros/latex/contrib/oberdiek/pdfcolparcolumns.dtx +% CTAN:macros/latex/contrib/oberdiek/pdfcolparcolumns.pdf +% +% Unpacking: +% (a) If pdfcolparcolumns.ins is present: +% tex pdfcolparcolumns.ins +% (b) Without pdfcolparcolumns.ins: +% tex pdfcolparcolumns.dtx +% (c) If you insist on using LaTeX +% latex \let\install=y\input{pdfcolparcolumns.dtx} +% (quote the arguments according to the demands of your shell) +% +% Documentation: +% (a) If pdfcolparcolumns.drv is present: +% latex pdfcolparcolumns.drv +% (b) Without pdfcolparcolumns.drv: +% latex pdfcolparcolumns.dtx; ... +% The class ltxdoc loads the configuration file ltxdoc.cfg +% if available. Here you can specify further options, e.g. +% use A4 as paper format: +% \PassOptionsToClass{a4paper}{article} +% +% Programm calls to get the documentation (example): +% pdflatex pdfcolparcolumns.dtx +% makeindex -s gind.ist pdfcolparcolumns.idx +% pdflatex pdfcolparcolumns.dtx +% makeindex -s gind.ist pdfcolparcolumns.idx +% pdflatex pdfcolparcolumns.dtx +% +% Installation: +% TDS:tex/latex/oberdiek/pdfcolparcolumns.sty +% TDS:doc/latex/oberdiek/pdfcolparcolumns.pdf +% TDS:doc/latex/oberdiek/pdfcolparcolumns-test1.tex +% TDS:source/latex/oberdiek/pdfcolparcolumns.dtx +% +%<*ignore> +\begingroup + \def\x{LaTeX2e}% +\expandafter\endgroup +\ifcase 0\ifx\install y1\fi\expandafter + \ifx\csname processbatchFile\endcsname\relax\else1\fi + \ifx\fmtname\x\else 1\fi\relax +\else\csname fi\endcsname +%</ignore> +%<*install> +\input docstrip.tex +\Msg{************************************************************************} +\Msg{* Installation} +\Msg{* Package: pdfcolparcolumns 2007/09/09 v1.1 Color stacks support for parcolumns (HO)} +\Msg{************************************************************************} + +\keepsilent +\askforoverwritefalse + +\preamble + +This is a generated file. + +Copyright (C) 2007 by Heiko Oberdiek <oberdiek@uni-freiburg.de> + +This work may be distributed and/or modified under the +conditions of the LaTeX Project Public License, either +version 1.3 of this license or (at your option) any later +version. The latest version of this license is in + http://www.latex-project.org/lppl.txt +and version 1.3 or later is part of all distributions of +LaTeX version 2005/12/01 or later. + +This work has the LPPL maintenance status "maintained". + +This Current Maintainer of this work is Heiko Oberdiek. + +This work consists of the main source file pdfcolparcolumns.dtx +and the derived files + pdfcolparcolumns.sty, pdfcolparcolumns.pdf, pdfcolparcolumns.ins, pdfcolparcolumns.drv, + pdfcolparcolumns-test1.tex. + +\endpreamble + +\generate{% + \file{pdfcolparcolumns.ins}{\from{pdfcolparcolumns.dtx}{install}}% + \file{pdfcolparcolumns.drv}{\from{pdfcolparcolumns.dtx}{driver}}% + \usedir{tex/latex/oberdiek}% + \file{pdfcolparcolumns.sty}{\from{pdfcolparcolumns.dtx}{package}}% + \usedir{doc/latex/oberdiek}% + \file{pdfcolparcolumns-test1.tex}{\from{pdfcolparcolumns.dtx}{test1}}% +} + +\obeyspaces +\Msg{************************************************************************} +\Msg{*} +\Msg{* To finish the installation you have to move the following} +\Msg{* file into a directory searched by TeX:} +\Msg{*} +\Msg{* pdfcolparcolumns.sty} +\Msg{*} +\Msg{* To produce the documentation run the file `pdfcolparcolumns.drv'} +\Msg{* through LaTeX.} +\Msg{*} +\Msg{* Happy TeXing!} +\Msg{*} +\Msg{************************************************************************} + +\endbatchfile +%</install> +%<*ignore> +\fi +%</ignore> +%<*driver> +\NeedsTeXFormat{LaTeX2e} +\ProvidesFile{pdfcolparcolumns.drv}% + [2007/09/09 v1.1 Color stacks support for parcolumns (HO)]% +\documentclass{ltxdoc} +\usepackage{holtxdoc} +\begin{document} + \DocInput{pdfcolparcolumns.dtx}% +\end{document} +%</driver> +% \fi +% +% \CheckSum{263} +% +% \CharacterTable +% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z +% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z +% Digits \0\1\2\3\4\5\6\7\8\9 +% Exclamation \! Double quote \" Hash (number) \# +% Dollar \$ Percent \% Ampersand \& +% Acute accent \' Left paren \( Right paren \) +% Asterisk \* Plus \+ Comma \, +% Minus \- Point \. Solidus \/ +% Colon \: Semicolon \; Less than \< +% Equals \= Greater than \> Question mark \? +% Commercial at \@ Left bracket \[ Backslash \\ +% Right bracket \] Circumflex \^ Underscore \_ +% Grave accent \` Left brace \{ Vertical bar \| +% Right brace \} Tilde \~} +% +% \GetFileInfo{pdfcolparcolumns.drv} +% +% \title{The \xpackage{pdfcolparcolumns} package} +% \date{2007/09/09 v1.1} +% \author{Heiko Oberdiek\\\xemail{oberdiek@uni-freiburg.de}} +% +% \maketitle +% +% \begin{abstract} +% Since version 1.40 \pdfTeX\ supports several color stacks. +% This package uses them to fix color problems in +% package \xpackage{parcolumns}. +% \end{abstract} +% +% \tableofcontents +% +% \section{Usage} +% +% \begin{quote} +% |\usepackage{pdfcolparcolumns}| +% \end{quote} +% The package \xpackage{pdfcolparcolumns} loads package \xpackage{parcolums} +% \cite{parcolumns}. If color stacks are available then the +% macros of \xpackage{parcolumns} are patched to add support +% for color stacks. +% +% \subsection{Future} +% +% Currently package \xpackage{parcolumns} does not seem to be +% maintained. Nevertheless if there will be a new version that +% adds support for color stacks, then this package may become +% obsolete. +% +% \StopEventually{ +% } +% +% \section{Implementation} +% +% \subsection{Identification} +% +% \begin{macrocode} +%<*package> +\NeedsTeXFormat{LaTeX2e} +\ProvidesPackage{pdfcolparcolumns}% + [2007/09/09 v1.1 Color stacks support for parcolumns (HO)]% +% \end{macrocode} +% +% \subsection{Load packages} +% +% \subsubsection{Package \xpackage{parcolumns}} +% +% Currently package \xpackage{parcolumns} does not define options. +% Thus it is just a precaution that the options of +% package \xpackage{pdfcolparcolumns} are passed to +% package \xpackage{parcolumns}. +% \begin{macrocode} +\DeclareOption*{% + \PassoptionsToPackage{\CurrentOption}{parcolumns}% +} +\ProcessOptions\relax +\RequirePackage{parcolumns}[2004/11/25] +% \end{macrocode} +% +% \subsubsection{Package \xpackage{pdfcol}} +% +% \begin{macrocode} +\RequirePackage{pdfcol}[2007/09/09] +\ifpdfcolAvailable +\else + \PackageInfo{pdfcolparcolumns}{% + Loading aborted, because color stacks are not available% + }% + \expandafter\endinput +\fi +% \end{macrocode} +% +% \subsubsection{Package \xpackage{infwarerr}} +% +% \begin{macrocode} +\RequirePackage{infwarerr}[2007/09/09] +% \end{macrocode} +% +% \subsection{Color stack macros} +% +% \begin{macro}{\pcpc@MaxStack} +% Macro \cs{pcpc@MaxStack} holds the highest number of +% allocated stacks. +% \begin{macrocode} +\global\chardef\pcpc@MaxStack=\z@ +% \end{macrocode} +% \end{macro} +% \begin{macro}{\pcpc@InitStacks} +% Macro \cs{pcpc@InitStacks} takes the number of columns +% as argument and ensures that there are enough color +% stacks for all columns. +% \begin{macrocode} +\def\pcpc@InitStacks#1{% + \ifnum#1>\pcpc@MaxStack + \begingroup + \count@\pcpc@MaxStack + \loop + \advance\count@\@ne + \pdfcolInitStack{pcpc@\the\count@}% + \ifnum#1>\count@ + \repeat + \global\chardef\pcpc@MaxStack=\count@ + \endgroup + \fi +} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\pcpc@SwitchStack} +% \begin{macrocode} +\def\pcpc@SwitchStack#1{% + \pdfcolSwitchStack{pcpc@\number#1}% +} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\pcpc@SetCurrent} +% \begin{macrocode} +\def\pcpc@SetCurrent#1{% + \pdfcolSetCurrent{pcpc@\number#1}% +} +% \end{macrocode} +% \end{macro} +% +% \subsection{Patches} +% +% Now the color stack macros are patched into the macros +% of package \xpackage{parcolumns}. +% +% \subsubsection{Init stacks} +% +% \cs{pcpc@InitStacks} should go into the definition of +% environment |parcolumns|. \cs{pc@alloccolumns} is executed +% there and nowhere else, thus we hook into it. +% \begin{macrocode} +\g@addto@macro\pc@alloccolumns{% + \pcpc@InitStacks\pc@columncount +} +% \end{macrocode} +% +% \subsubsection{Switch stack} +% +% \cs{pcpc@SwitchStack} should be called by marco \cs{colchunk@}. +% However it is easier to patch \cs{pc@setcolumnwidth} that +% is executed in \cs{colchunk@} only. +% \begin{macrocode} +\g@addto@macro\pc@setcolumnwidth{% + \pcpc@SwitchStack\pc@columnctr +} +% \end{macrocode} +% +% \subsubsection{Set current stack color} +% +% \cs{pcpc@SetCurrent} is set at the begin of each line. +% It must be inserted into \cs{pc@placeboxes}. Unhappily +% there is no easy way. Therefore we check and +% redefine \cs{pc@placeboxes}. +% \begin{macrocode} +\begingroup + \def\x{% + \global\let\@tempa\relax + \count@\z@ + \hb@xt@\linewidth{% + \vfuzz30ex % + \vbadness\@M + \splittopskip\z@skip + \loop + \ifnum\count@<\pc@columncount + \advance\count@\@ne + \expandafter\ifvoid\csname pc@column@\number\count@\endcsname + \hskip\csname pc@column@width@\number\count@\endcsname + \else + \expandafter\setbox\expandafter\@tempboxa\expandafter + \vsplit\csname pc@column@\number\count@\endcsname + to \dp\strutbox + \vbox{% + \unvbox\@tempboxa + }% + \fi + \expandafter\ifvoid\csname pc@column@\number\count@\endcsname + \else + \global\let\@tempa\pc@placeboxes + \fi + \ifnum\count@<\pc@columncount + \strut + \hfill + \ifpc@rulebetween + \vrule + \hfill + \fi + \fi + \repeat + }% + \@tempa + }% + \ifx\x\pc@placeboxes + \else + \@PackageWarningNoLine{pdfcolparcolumns}{% + Command \string\pc@placeboxes\space has changed.\MessageBreak + Supported versions of package `parcolumns':\MessageBreak + \space\space 2004/08/05.\MessageBreak + The redefinition of \string\pc@placeboxes\space may not% + \MessageBreak + behave correctly depending on the changes% + }% + \fi +\endgroup +% \end{macrocode} +% \begin{macro}{\pc@placeboxes} +% \begin{macrocode} +\renewcommand*{\pc@placeboxes}{% + \global\let\@tempa\relax + \count@\z@ + \hb@xt@\linewidth{% + \vfuzz30ex % + \vbadness\@M + \splittopskip\z@skip + \loop + \ifnum\count@<\pc@columncount + \advance\count@\@ne + \expandafter\ifvoid\csname pc@column@\number\count@\endcsname + \hskip\csname pc@column@width@\number\count@\endcsname + \else + \expandafter\setbox\expandafter\@tempboxa\expandafter + \vsplit\csname pc@column@\number\count@\endcsname + to \dp\strutbox + \vbox{% + \pcpc@SetCurrent\count@ + \unvbox\@tempboxa + }% + \fi + \expandafter\ifvoid\csname pc@column@\number\count@\endcsname + \else + \global\let\@tempa\pc@placeboxes + \fi + \ifnum\count@<\pc@columncount + \strut + \hfill + \ifpc@rulebetween + \vrule + \hfill + \fi + \fi + \repeat + }% + \@tempa +} +% \end{macrocode} +% \end{macro} +% +% \begin{macrocode} +%</package> +% \end{macrocode} +% +% \section{Test} +% +% The test file is a modified version of the file that +% Donald Goodman has posted in \xnewsgroup{comp.text.tex}. +% \begin{macrocode} +%<*test1> +\NeedsTeXFormat{LaTeX2e} +\AtEndDocument{% + \typeout{}% + \typeout{**************************************}% + \typeout{*** \space Check the PDF file manually! \space ***}% + \typeout{**************************************}% + \typeout{}% +} +\documentclass{article} +\usepackage{xcolor} +\usepackage{pdfcolparcolumns} + +\newcommand{\instruct}[1]{% + \noindent + \footnotesize + \textcolor{red}{#1}% +} + +\begin{document} + \begin{parcolumns}[colwidths={1=2.3in,2=2.3in},sloppy]{2}% + \colchunk[1]{% + \instruct{Et non dicitur versus} % + Fidelium anim\ae\ % + \instruct{% + sed immediate subiungitur antiphona finalis % + beat\ae\ Mari\ae\ Virginis% + } % + 100.% + }% + \colchunk[2]{% + \instruct{% + And the verse % + \textcolor{black}{May the souls of the faithful} % + is not said, but the final antiphon of the % + Blessed Virgin Mary, % + \textcolor{black}{100,} % + is immediately joined.% + }% + }% + \end{parcolumns}% +\end{document} +%</test1> +% \end{macrocode} +% +% \section{Installation} +% +% \subsection{Download} +% +% \paragraph{Package.} This package is available on +% CTAN\footnote{\url{ftp://ftp.ctan.org/tex-archive/}}: +% \begin{description} +% \item[\CTAN{macros/latex/contrib/oberdiek/pdfcolparcolumns.dtx}] The source file. +% \item[\CTAN{macros/latex/contrib/oberdiek/pdfcolparcolumns.pdf}] Documentation. +% \end{description} +% +% +% \paragraph{Bundle.} All the packages of the bundle `oberdiek' +% are also available in a TDS compliant ZIP archive. There +% the packages are already unpacked and the documentation files +% are generated. The files and directories obey the TDS standard. +% \begin{description} +% \item[\CTAN{macros/latex/contrib/oberdiek/oberdiek-tds.zip}] +% \end{description} +% \emph{TDS} refers to the standard ``A Directory Structure +% for \TeX\ Files'' (\CTAN{tds/tds.pdf}). Directories +% with \xfile{texmf} in their name are usually organized this way. +% +% \subsection{Bundle installation} +% +% \paragraph{Unpacking.} Unpack the \xfile{oberdiek-tds.zip} in the +% TDS tree (also known as \xfile{texmf} tree) of your choice. +% Example (linux): +% \begin{quote} +% |unzip oberdiek-tds.zip -d ~/texmf| +% \end{quote} +% +% \paragraph{Script installation.} +% Check the directory \xfile{TDS:scripts/oberdiek/} for +% scripts that need further installation steps. +% Package \xpackage{attachfile2} comes with the Perl script +% \xfile{pdfatfi.pl} that should be installed in such a way +% that it can be called as \texttt{pdfatfi}. +% Example (linux): +% \begin{quote} +% |chmod +x scripts/oberdiek/pdfatfi.pl|\\ +% |cp scripts/oberdiek/pdfatfi.pl /usr/local/bin/| +% \end{quote} +% +% \subsection{Package installation} +% +% \paragraph{Unpacking.} The \xfile{.dtx} file is a self-extracting +% \docstrip\ archive. The files are extracted by running the +% \xfile{.dtx} through \plainTeX: +% \begin{quote} +% \verb|tex pdfcolparcolumns.dtx| +% \end{quote} +% +% \paragraph{TDS.} Now the different files must be moved into +% the different directories in your installation TDS tree +% (also known as \xfile{texmf} tree): +% \begin{quote} +% \def\t{^^A +% \begin{tabular}{@{}>{\ttfamily}l@{ $\rightarrow$ }>{\ttfamily}l@{}} +% pdfcolparcolumns.sty & tex/latex/oberdiek/pdfcolparcolumns.sty\\ +% pdfcolparcolumns.pdf & doc/latex/oberdiek/pdfcolparcolumns.pdf\\ +% pdfcolparcolumns-test1.tex & doc/latex/oberdiek/pdfcolparcolumns-test1.tex\\ +% pdfcolparcolumns.dtx & source/latex/oberdiek/pdfcolparcolumns.dtx\\ +% \end{tabular}^^A +% }^^A +% \sbox0{\t}^^A +% \ifdim\wd0>\linewidth +% \begingroup +% \advance\linewidth by\leftmargin +% \advance\linewidth by\rightmargin +% \edef\x{\endgroup +% \def\noexpand\lw{\the\linewidth}^^A +% }\x +% \def\lwbox{^^A +% \leavevmode +% \hbox to \linewidth{^^A +% \kern-\leftmargin\relax +% \hss +% \usebox0 +% \hss +% \kern-\rightmargin\relax +% }^^A +% }^^A +% \ifdim\wd0>\lw +% \sbox0{\small\t}^^A +% \ifdim\wd0>\linewidth +% \ifdim\wd0>\lw +% \sbox0{\footnotesize\t}^^A +% \ifdim\wd0>\linewidth +% \ifdim\wd0>\lw +% \sbox0{\scriptsize\t}^^A +% \ifdim\wd0>\linewidth +% \ifdim\wd0>\lw +% \sbox0{\tiny\t}^^A +% \ifdim\wd0>\linewidth +% \lwbox +% \else +% \usebox0 +% \fi +% \else +% \lwbox +% \fi +% \else +% \usebox0 +% \fi +% \else +% \lwbox +% \fi +% \else +% \usebox0 +% \fi +% \else +% \lwbox +% \fi +% \else +% \usebox0 +% \fi +% \else +% \lwbox +% \fi +% \else +% \usebox0 +% \fi +% \end{quote} +% If you have a \xfile{docstrip.cfg} that configures and enables \docstrip's +% TDS installing feature, then some files can already be in the right +% place, see the documentation of \docstrip. +% +% \subsection{Refresh file name databases} +% +% If your \TeX~distribution +% (\teTeX, \mikTeX, \dots) relies on file name databases, you must refresh +% these. For example, \teTeX\ users run \verb|texhash| or +% \verb|mktexlsr|. +% +% \subsection{Some details for the interested} +% +% \paragraph{Attached source.} +% +% The PDF documentation on CTAN also includes the +% \xfile{.dtx} source file. It can be extracted by +% AcrobatReader 6 or higher. Another option is \textsf{pdftk}, +% e.g. unpack the file into the current directory: +% \begin{quote} +% \verb|pdftk pdfcolparcolumns.pdf unpack_files output .| +% \end{quote} +% +% \paragraph{Unpacking with \LaTeX.} +% The \xfile{.dtx} chooses its action depending on the format: +% \begin{description} +% \item[\plainTeX:] Run \docstrip\ and extract the files. +% \item[\LaTeX:] Generate the documentation. +% \end{description} +% If you insist on using \LaTeX\ for \docstrip\ (really, +% \docstrip\ does not need \LaTeX), then inform the autodetect routine +% about your intention: +% \begin{quote} +% \verb|latex \let\install=y\input{pdfcolparcolumns.dtx}| +% \end{quote} +% Do not forget to quote the argument according to the demands +% of your shell. +% +% \paragraph{Generating the documentation.} +% You can use both the \xfile{.dtx} or the \xfile{.drv} to generate +% the documentation. The process can be configured by the +% configuration file \xfile{ltxdoc.cfg}. For instance, put this +% line into this file, if you want to have A4 as paper format: +% \begin{quote} +% \verb|\PassOptionsToClass{a4paper}{article}| +% \end{quote} +% An example follows how to generate the +% documentation with pdf\LaTeX: +% \begin{quote} +%\begin{verbatim} +%pdflatex pdfcolparcolumns.dtx +%makeindex -s gind.ist pdfcolparcolumns.idx +%pdflatex pdfcolparcolumns.dtx +%makeindex -s gind.ist pdfcolparcolumns.idx +%pdflatex pdfcolparcolumns.dtx +%\end{verbatim} +% \end{quote} +% +% \begin{thebibliography}{9} +% +% \bibitem{parcolumns} +% Jonathan Sauer: \textit{The \xpackage{parcolumns} package}; +% 2004/11/25;\\ +% \CTAN{macros/latex/contrib/sauerj/parcolumns.pdf}. +% +% \bibitem{pdfcol} +% Heiko Oberdiek: \textit{The \xpackage{pdfcol} package}; +% 2007/09/09;\\ +% \CTAN{macros/latex/contrib/oberdiek/pdfcol.pdf}. +% +% \end{thebibliography} +% +% \begin{History} +% \begin{Version}{2007/07/26 v1.0} +% \item +% First version, published in the newsgroup \texttt{comp.text.tex} +% with the name \xpackage{parcolumns-colorstack}. +% \end{Version} +% \begin{Version}{2007/09/09 v1.1} +% \item +% CTAN version, package name renamed to \xpackage{pdfcolparcolumns}. +% \item +% Uses package \xpackage{pdfcol}. +% \item +% Documentation added. +% \item +% Test file added. +% \end{Version} +% \end{History} +% +% \PrintIndex +% +% \Finale +\endinput |