summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/source/latex/mh
diff options
context:
space:
mode:
Diffstat (limited to 'Master/texmf-dist/source/latex/mh')
-rw-r--r--Master/texmf-dist/source/latex/mh/breqn.dtx58
-rw-r--r--Master/texmf-dist/source/latex/mh/empheq.dtx36
-rw-r--r--Master/texmf-dist/source/latex/mh/flexisym.dtx10
-rw-r--r--Master/texmf-dist/source/latex/mh/mathstyle.dtx94
-rw-r--r--Master/texmf-dist/source/latex/mh/mathtools.dtx664
-rw-r--r--Master/texmf-dist/source/latex/mh/mhsetup.dtx8
6 files changed, 709 insertions, 161 deletions
diff --git a/Master/texmf-dist/source/latex/mh/breqn.dtx b/Master/texmf-dist/source/latex/mh/breqn.dtx
index d1bc7151b99..1a29cd69d1f 100644
--- a/Master/texmf-dist/source/latex/mh/breqn.dtx
+++ b/Master/texmf-dist/source/latex/mh/breqn.dtx
@@ -1,7 +1,7 @@
% \iffalse meta-comment
%
% Copyright (C) 1997-2003 by Michael J. Downes
-% Copyright (C) 2007-2008 by Morten Hoegholm <mh.ctan@gmail.com>
+% Copyright (C) 2007-2008 by Morten Hoegholm
%
% This work may be distributed and/or modified under the
% conditions of the LaTeX Project Public License, either
@@ -13,7 +13,7 @@
%
% This work has the LPPL maintenance status "maintained".
%
-% This Current Maintainer of this work is Morten Hoegholm,
+% This Current Maintainer of this work is
% Lars Madsen, Will Robertson and Joseph Wright.
%
% This work consists of the main source file breqn.dtx
@@ -68,7 +68,7 @@
\input docstrip.tex
\Msg{************************************************************************}
\Msg{* Installation}
-\Msg{* Package: breqn 2008/07/28 v0.98 Breqn (MH)}
+\Msg{* Package: breqn 2012/05/10 v0.98b Breqn}
\Msg{************************************************************************}
\keepsilent
@@ -79,7 +79,7 @@
This is a generated file.
Copyright (C) 1997-2003 by Michael J. Downes
-Copyright (C) 2007-2008 by Morten Hoegholm <mh.ctan@gmail.com>
+Copyright (C) 2007-2008 by Morten Hoegholm
This work may be distributed and/or modified under the
conditions of the LaTeX Project Public License, either
@@ -91,7 +91,7 @@ LaTeX version 2005/12/01 or later.
This work has the LPPL maintenance status "maintained".
-This Current Maintainer of this work is Morten Hoegholm,
+This Current Maintainers of this work is
Lars Madsen, Will Robertson and Joseph Wright.
This work consists of the main source file breqn.dtx
@@ -130,7 +130,7 @@ and the derived files
%<*driver>
\NeedsTeXFormat{LaTeX2e}
\ProvidesFile{breqn.drv}%
- [2008/07/28 v0.98 breqn (MH)]
+ [2012/05/10 v0.98b breqn]
\documentclass{ltxdoc}
\CodelineIndex
\EnableCrossrefs
@@ -232,8 +232,10 @@ and the derived files
% \fi
%
% \title{The \pkg{breqn} package}
-% \date{2008/07/28 v0.98}
-% \author{Morten H\o gholm \\\texttt{mh.ctan@gmail.com}}
+% \date{2012/05/10 v0.98b}
+% \author{The breqn maintainers\thanks{The maintainers would like to thank
+% Morten H\o gholm for bringing \texttt{breqn} forward}
+% \\\texttt{mh.ctan@gmail.com}}
%
% \maketitle
% \begin{abstract}
@@ -251,16 +253,17 @@ and the derived files
% the \TeX\ world---Michael passed away in early 2003 at the age of
% only~44.
%
-% The American Mathematical Society has kindly allowed me to assume
-% maintainership of this part of his work and I wish to express my
-% gratitude to them and to Barbara Beeton in particular for providing
-% me with the files I needed.
+% The American Mathematical Society kindly allowed Morten H\o gholm to
+% assume maintainership of this part of his work and he wish to
+% express my gratitude to them and to Barbara Beeton in particular for
+% providing me with the files he needed.
%
-% I hope to continue Michael's work, thereby allowing users to create
+% MH hope to continue Michael's work, thereby allowing users to create
% more \emph{masterpieces of the publishing art} as I think he would
% have wanted.
%
-%
+% Following the July 2008 breqn release, breqn was left in the hands
+% of a maintenance team, while MH moved on with other projects.
%
% \section{Package loading}
%
@@ -1013,7 +1016,12 @@ and the derived files
% Declare package name and date.
% \begin{macrocode}
\RequirePackage{expl3}[2009/08/05]
-\ProvidesExplPackage{breqn}{2009/08/07}{0.98a}{Breaking equations}
+\ProvidesExplPackage{breqn}{2012/05/10}{0.98b}{Breaking equations}
+% \end{macrocode}
+% Regrettably, \pkg{breqn} is internally a mess, so we have to take
+% some odd steps.
+% \begin{macrocode}
+\ExplSyntaxOff
% \end{macrocode}
%
%
@@ -1514,6 +1522,7 @@ and the derived files
\splitfirstmark{\string\splitfirstmark:}%
\splitbotmark{\string\splitbotmark:}%
#1{\string#1}%
+ \@nil % for the \@car
\edef\@tempa{\expandafter\strip@prefix\meaning\@tempb}%
\edef\@tempb{\meaning#1}%
\ifx\@tempa\@tempb \global\let#2#1%
@@ -4759,24 +4768,19 @@ and the derived files
% \end{macro}
%
%
+% \begin{macro}{\true@true@true}
% \begin{macro}{\true@false@true}
-% \begin{macrocode}
-\def\true@false@true{\fi\fi\iftrue\iffalse\iftrue}
-% \end{macrocode}
-% \end{macro}
-%
-%
+% \begin{macro}{\false@true@false}
% \begin{macro}{\false@false@false}
% \begin{macrocode}
+\def\true@true@true {\fi\fi\iftrue \iftrue \iftrue }
+\def\true@false@true {\fi\fi\iftrue \iffalse\iftrue }
+\def\false@true@false {\fi\fi\iffalse\iftrue \iffalse}
\def\false@false@false{\fi\fi\iffalse\iffalse\iffalse}
% \end{macrocode}
% \end{macro}
-%
-%
-% \begin{macro}{\false@true@false}
-% \begin{macrocode}
-\def\false@true@false{\fi\fi\iffalse\iftrue\iffalse}
-% \end{macrocode}
+% \end{macro}
+% \end{macro}
% \end{macro}
%
%
diff --git a/Master/texmf-dist/source/latex/mh/empheq.dtx b/Master/texmf-dist/source/latex/mh/empheq.dtx
index 8f46877b052..8d598a56b02 100644
--- a/Master/texmf-dist/source/latex/mh/empheq.dtx
+++ b/Master/texmf-dist/source/latex/mh/empheq.dtx
@@ -1,6 +1,6 @@
% \iffalse meta-comment
%
-% Copyright (C) 2002-2007 by Morten Hoegholm <mh.ctan@gmail.com>
+% Copyright (C) 2002-2007 by Morten Hoegholm
%
% This work may be distributed and/or modified under the
% conditions of the LaTeX Project Public License, either
@@ -12,7 +12,8 @@
%
% This work has the LPPL maintenance status "maintained".
%
-% This Current Maintainer of this work is Morten Hoegholm.
+% This Current Maintainer of this work is
+% Lars Madsen, Will Robertson and Joseph Wright.
%
% This work consists of the main source file empheq.dtx
% and the derived files
@@ -76,7 +77,7 @@
This is a generated file.
-Copyright (C) 2002-2007 by Morten Hoegholm <mh.ctan@gmail.com>
+Copyright (C) 2002-2007 by Morten Hoegholm
This work may be distributed and/or modified under the
conditions of the LaTeX Project Public License, either
@@ -88,7 +89,8 @@ LaTeX version 2005/12/01 or later.
This work has the LPPL maintenance status "maintained".
-This Current Maintainer of this work is Morten Hoegholm.
+This Current Maintainer of this work is
+Lars Madsen, Will Robertson and Joseph Wright.
This work consists of the main source file empheq.dtx
and the derived files
@@ -126,7 +128,7 @@ and the derived files
%<*driver>
\NeedsTeXFormat{LaTeX2e}
\ProvidesFile{empheq.drv}%
- [2007/12/03 v2.12 Emphasizing equations (MH)]
+ [2012/05/09 v2.13 Emphasizing equations]
\documentclass{ltxdoc}
\usepackage{mathpazo}
\usepackage[overload]{empheq}
@@ -356,7 +358,10 @@ and the derived files
% \title{The \pkg{empheq} package\thanks{This file has version number
% \fileversion, last revised \filedate.}\\
% Emphasizing equations in \LaTeXe}
-% \author{Morten H\o gholm}
+% \author{Lars Madsen, Will Robertson and Joseph
+% Wright\\ (maintainers)\thanks{The maintainers would like to thank
+% Morten H\o gholm for his contributions to this package}}
+%
% \date{\filedate}
%
% \maketitle
@@ -1141,6 +1146,23 @@ and the derived files
%
% \subsection{Support for \pkg{ntheorem}}\label{sec:ntheorem-support}
%
+% \changes{v2.13}{2012/05/09}{Added caveat}
+% \textbf{Caveat:} Due to an unfortunate interaction between \pkg{empheq} and
+% \pkg{ntheorem}, users may want to add
+% \begin{verbatim}
+% \usetagform{default}
+% \end{verbatim}
+% \emph{after} loading \pkg{ntheorem} otherwise the tags may be
+% placed wrong and any labels within the \env{empheq} environment may
+% be lost. In the future \pkg{ntheorem} should be able to test for
+% this and add \verb|\usetagform{default}| automatically.
+%
+% Users who use \verb|\usetagform| to get another tag design, should
+% make sure to postpone this configuration until \emph{after} loading
+% \pkg{ntheorem}.
+%
+% \bigskip
+%
% \changes{v2.00}{2004/04/14}{Added description of the
% \opt{ntheorem} option}
% \changes{v1.05}{2004/02/16}{Added support for the end-of-theorem
@@ -1545,7 +1567,7 @@ and the derived files
% \section{Contact information}
%
% Should you have any feature request, suggestions, or bug reports
-% then feel free to contact me at
+% then feel free to contact us at
% \begin{quote}
% \email{mh.ctan@gmail.com}
% \end{quote}
diff --git a/Master/texmf-dist/source/latex/mh/flexisym.dtx b/Master/texmf-dist/source/latex/mh/flexisym.dtx
index 0f804a1d3fe..7b4df2f5abc 100644
--- a/Master/texmf-dist/source/latex/mh/flexisym.dtx
+++ b/Master/texmf-dist/source/latex/mh/flexisym.dtx
@@ -1,7 +1,7 @@
% \iffalse meta-comment
%
% Copyright (C) 1997-2003 by Michael J. Downes
-% Copyright (C) 2007-2008 by Morten Hoegholm <mh.ctan@gmail.com>
+% Copyright (C) 2007-2008 by Morten Hoegholm
%
% This work may be distributed and/or modified under the
% conditions of the LaTeX Project Public License, either
@@ -13,7 +13,7 @@
%
% This work has the LPPL maintenance status "maintained".
%
-% This Current Maintainer of this work is Morten Hoegholm,
+% This Current Maintainer of this work is
% Lars Madsen, Will Robertson and Joseph Wright.
%
% This work consists of the main source file flexisym.dtx
@@ -84,7 +84,7 @@
This is a generated file.
Copyright (C) 1997-2003 by Michael J. Downes
-Copyright (C) 2007-2010 by Morten Hoegholm <mh.ctan@gmail.com>
+Copyright (C) 2007-2010 by Morten Hoegholm
This work may be distributed and/or modified under the
conditions of the LaTeX Project Public License, either
@@ -96,7 +96,7 @@ LaTeX version 2005/12/01 or later.
This work has the LPPL maintenance status "maintained".
-This Current Maintainer of this work is Morten Hoegholm,
+This Current Maintainer of this work is
Lars Madsen, Will Robertson and Joseph Wright.
This work consists of the main source file flexisym.dtx
@@ -166,7 +166,7 @@ and the derived files
%
% \title{The \textsf{flexisym} package}
% \date{2008/08/08 v0.97a}
-% \author{Morten H\o gholm \\\texttt{mh.ctan@gmail.com}}
+% \author{Morten H\o gholm \\Maintainers: \texttt{mh.ctan@gmail.com}}
%
% \maketitle
%
diff --git a/Master/texmf-dist/source/latex/mh/mathstyle.dtx b/Master/texmf-dist/source/latex/mh/mathstyle.dtx
index 4e21d9853bc..a3d33a58efa 100644
--- a/Master/texmf-dist/source/latex/mh/mathstyle.dtx
+++ b/Master/texmf-dist/source/latex/mh/mathstyle.dtx
@@ -1,7 +1,7 @@
% \iffalse meta-comment
%
% Copyright (C) 1997-2003 by Michael J. Downes
-% Copyright (C) 2007-2008 by Morten Hoegholm <mh.ctan@gmail.com>
+% Copyright (C) 2007-2008 by Morten Hoegholm
%
% This work may be distributed and/or modified under the
% conditions of the LaTeX Project Public License, either
@@ -13,7 +13,7 @@
%
% This work has the LPPL maintenance status "maintained".
%
-% This Current Maintainer of this work is Morten Hoegholm,
+% This Current Maintainer of this work is
% Lars Madsen, Will Robertson and Joseph Wright.
%
% This work consists of the main source file mathstyle.dtx
@@ -67,8 +67,7 @@
%<*install>
\input docstrip.tex
\Msg{************************************************************************}
-\Msg{* Installation}
-\Msg{* Package: mathstyle 2008/11/25 v0.88 Mathstyle (MH)}
+\Msg{* Installation for package: mathstyle}
\Msg{************************************************************************}
\keepsilent
@@ -79,7 +78,7 @@
This is a generated file.
Copyright (C) 1997-2003 by Michael J. Downes
-Copyright (C) 2007-2008 by Morten Hoegholm <mh.ctan@gmail.com>
+Copyright (C) 2007-2011 by Morten Hoegholm et al
This work may be distributed and/or modified under the
conditions of the LaTeX Project Public License, either
@@ -91,7 +90,7 @@ LaTeX version 2005/12/01 or later.
This work has the LPPL maintenance status "maintained".
-This Current Maintainer of this work is Morten Hoegholm,
+This Current Maintainer of this work is
Lars Madsen, Will Robertson and Joseph Wright.
This work consists of the main source file mathstyle.dtx
@@ -127,10 +126,16 @@ and the derived files
%<*ignore>
\fi
%</ignore>
+%
+%<*driver>
+\ProvidesFile{mathstyle.drv}
+%</driver>
+%<package>\NeedsTeXFormat{LaTeX2e}
+%<package>\ProvidesPackage{mathstyle}
+%<*package|driver>
+ [2011/08/03 v0.90 Tracking mathstyle implicitly]
+%</package|driver>
%<*driver>
-\NeedsTeXFormat{LaTeX2e}
-\ProvidesFile{mathstyle.drv}%
- [2008/11/25 v0.88 mathstyle (MH)]
\documentclass{ltxdoc}
\CodelineIndex
\EnableCrossrefs
@@ -142,9 +147,10 @@ and the derived files
%</driver>
% \fi
%
+% \GetFileInfo{mathstyle.drv}
% \title{The \textsf{mathstyle} package}
-% \date{2008/08/13 v0.87}
-% \author{Morten H\o gholm \\\texttt{mh.ctan@gmail.com}}
+% \date{\filedate\quad\fileversion}
+% \author{Morten H\o gholm \\Maintainers: \texttt{mh.ctan@gmail.com}}
%
%
% \maketitle
@@ -199,17 +205,42 @@ and the derived files
% #1 {}\rlap{$\m@th \currentmathstyle {#2}$}}
% \end{verbatim}
%
+% \subsection{Package options}
%
+% This package has one set of options affecting the \verb|_| and \verb|^| characters:
%
-% \StopEventually{}
-% \part*{Implementation}
+% \begin{itemize}
+% \item\verb|\usepackage[mathactivechars]{mathstyle}|
+%
+% This is the default behaviour. Here, \verb|_| and \verb|^| are made into harmless
+% characters in text mode and behave as expected (for entering sub/superscript) when
+% inside math mode.
+% Certain code that assumes the catcodes of these characters may get confused about
+% this; see below for a possible fix.
%
+% \item\verb|\usepackage[activechars]{mathstyle}|
%
+% With this option, \verb|_| and \verb|^| are made into active characters for
+% entering sub/superscript mode in all cases---therefore, in text mode they will
+% produce a regular error (`Missing \$ inserted') indicating they are being used
+% out of place.
+%
+% \item\verb|\usepackage[noactivechars]{mathstyle}|
+%
+% This is the option most like to solve any compatibility problems. Here,
+% \verb|_| and \verb|^| retain their regular catcodes at all times and behave
+% in their default fashion. \textbf{However}, certain other features of this
+% package (such as \cs{currentmathstyle} inside a subscript) will then fail
+% to work, so only use this option as a last resort.
+% \end{itemize}
+%
+% \StopEventually{}
+% \part*{Implementation}
%
% \begin{macrocode}
%<*package>
-\ProvidesPackage{mathstyle}[2010/11/17 v0.89]
% \end{macrocode}
+%
% \begin{macro}{\@saveprimitive}
% A straight copy from \pkg{breqn}, see implementation details
% there. Of course, with a recent pdf\TeX\ (v1.40+), one can just
@@ -238,6 +269,7 @@ and the derived files
\splitfirstmark{\string\splitfirstmark:}%
\splitbotmark{\string\splitbotmark:}%
#1{\string#1}%
+ \@nil % for the \@car
\edef\@tempa{\expandafter\strip@prefix\meaning\@tempb}%
\edef\@tempb{\meaning#1}%
\ifx\@tempa\@tempb \global\let#2#1%
@@ -251,10 +283,27 @@ and the derived files
}
% \end{macrocode}
% \end{macro}
-% Do initial \cs{chardef} of \cs{mathstyle}.
+%
+% \begin{macro}{\everydisplay}
+% We need to keep track of whether we're in inline or display maths, and the only
+% way to do that is to add a switch inside \verb|\everydisplay|.
+% We act sensibly and preserve any of the previous contents of that token register
+% before adding our own code here.
% \begin{macrocode}
-\chardef\mathstyle=\z@
+\everydisplay=\expandafter{\the\everydisplay\chardef\mathstyle\z@}
% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\mathstyle}
+% A counter for the math style: 0--display, 1--text, 2--script, 3--scriptscript.
+% The logic is that display maths will explicitly
+% set \verb|\mathstyle| to zero (see above), so by default it is set to the
+% `text' maths style.
+% \begin{macrocode}
+\chardef\mathstyle\@ne
+% \end{macrocode}
+% \end{macro}
+%
% Save the four style changing primitives, \cs{mathchoice} and the
% fraction commands.
% \begin{macrocode}
@@ -315,6 +364,8 @@ and the derived files
\def\sb#1{\mathsub{\protect\subsupstyle#1}}%
\def\sp#1{\mathsup{\protect\subsupstyle#1}}%
% \end{macrocode}
+%
+% \begin{macro}{\mathchoice}
% \cs{mathchoice} is now just a switch. Note that this redefinition
% does not allow the arbitrary \meta{filler} of the \TeX\
% primitive. Very rarely used anyway.
@@ -338,17 +389,26 @@ and the derived files
\providecommand\@thirdoffour[4]{#3}
\providecommand\@fourthoffour[4]{#4}
% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\genfrac}
% The fractions. Note that this uses the same names as in
% \pkg{amsmath}. Much the same except here they call \cs{fracstyle}.
% \begin{macrocode}
\DeclareRobustCommand\genfrac[6]{%
- {\fracstyle #1%
+ {#1\fracstyle
{\begingroup #5\endgroup
\csname @@\ifx\maxdimen#4\maxdimen over\else above\fi
\if @#2@\else withdelims\fi\endcsname #2#3#4\relax
#6}%
}%
}
+% \end{macrocode}
+% \changes{v0.90}{2011/08/03}{\cs{fracstyle} must be called \emph{after}
+% changing to the required style}
+% \end{macro}
+%
+% \begin{macrocode}
\renewcommand{\frac}{\genfrac{}{}{}{}}
\providecommand{\dfrac}{}
\providecommand{\tfrac}{}
diff --git a/Master/texmf-dist/source/latex/mh/mathtools.dtx b/Master/texmf-dist/source/latex/mh/mathtools.dtx
index ef5dea37965..6c76f41d408 100644
--- a/Master/texmf-dist/source/latex/mh/mathtools.dtx
+++ b/Master/texmf-dist/source/latex/mh/mathtools.dtx
@@ -1,6 +1,6 @@
% \iffalse meta-comment
%
-% Copyright (C) 2004-2011 by Morten Hoegholm <mh.ctan@gmail.com>
+% Copyright (C) 2004-2011 by Morten Hoegholm
%
% This work may be distributed and/or modified under the
% conditions of the LaTeX Project Public License, either
@@ -12,7 +12,8 @@
%
% This work has the LPPL maintenance status "maintained".
%
-% This Current Maintainer of this work is Morten Hoegholm.
+% This Current Maintainer of this work is
+% Lars Madsen, Will Robertson and Joseph Wright
%
% This work consists of the main source file mathtools.dtx
% and the derived files
@@ -66,7 +67,7 @@
\input docstrip.tex
\Msg{************************************************************************}
\Msg{* Installation}
-\Msg{* Package: mathtools 2011/04/06 v1.11}
+\Msg{* Package: mathtools 2012/05/10 v1.12}
\Msg{************************************************************************}
\keepsilent
@@ -76,7 +77,7 @@
This is a generated file.
-Copyright (C) 2002-2011 by Morten Hoegholm <mh.ctan@gmail.com>
+Copyright (C) 2002-2011 by Morten Hoegholm
This work may be distributed and/or modified under the
conditions of the LaTeX Project Public License, either
@@ -88,7 +89,7 @@ LaTeX version 2005/12/01 or later.
This work has the LPPL maintenance status "maintained".
-This Current Maintainer of this work is Morten Hoegholm,
+This Current Maintainer of this work is
Lars Madsen, Will Robertson and Joseph Wright.
This work consists of the main source file mathtools.dtx
@@ -127,7 +128,7 @@ and the derived files
%<*driver>
\NeedsTeXFormat{LaTeX2e}
\ProvidesFile{mathtools.drv}%
- [2011/04/06 v1.11 mathematical typesetting tools]
+ [2012/05/10 v1.12 mathematical typesetting tools]
\documentclass{ltxdoc}
\IfFileExists{fourier.sty}{\usepackage{fourier}}{}
\addtolength\marginparwidth{-25pt}
@@ -172,6 +173,7 @@ and the derived files
}%
}
+
\newcommand*\ProvidedBy[2]{%
\hskip1sp
\marginpar{%
@@ -190,6 +192,16 @@ and the derived files
}%
}
+\newcommand*\tsxPosting[2]{%
+ \hskip1sp
+ \marginpar{%
+ \parbox[b]{\marginparwidth}{\small\sffamily\raggedright
+ \strut Posted on \texttt{\small tex.stackexchange.com} \\#1\\#2%
+ }%
+ }%
+}
+
+
\expandafter\def\expandafter\MakePrivateLetters\expandafter{%
\MakePrivateLetters \catcode`\_=11\relax
}
@@ -258,13 +270,14 @@ and the derived files
%
% \GetFileInfo{mathtools.drv}
%
-% \CheckSum{2584}
+% \CheckSum{2836}
%
% \title{The \pkg{mathtools} package\thanks{This file has version number
% \fileversion, last revised \filedate.}}
%
-% \author{Morten H\o gholm, Lars Madsen,\\ Will Robertson and Joseph
-% Wright\\ (maintainers)}
+% \author{Lars Madsen, Will Robertson and Joseph
+% Wright\\ (maintainers)\thanks{The maintainers would like to thank
+% Morten H\o gholm for his contributions to this package}}
% \date{\filedate}
%
% \maketitle
@@ -275,7 +288,7 @@ and the derived files
% 1)~correct various bugs/defeciencies in \pkg{amsmath} until
% these are fixed by the \AmS{} and 2)~provide useful tools
% for mathematical typesetting, be it a small macro for
-% typesetting a prescript or an underbraket, or entirely new
+% typesetting a prescript or an underbracket, or entirely new
% display math constructs such as a \env{multlined} environment.
% \end{abstract}
%
@@ -358,7 +371,7 @@ and the derived files
% [v] = 200
% \end{gathered}
% \]
-% Yes, the \texttt[p] has been gobbled without any warning
+% Yes, the \texttt{[p]} has been gobbled without any warning
% whatsoever.\footnote{\pkg{amsmath} thought the \texttt[p] was an
% optional argument, checked if it was \texttt{t} or \texttt{b} and
% when both tests failed, assumed it was a \texttt{c}.} This is
@@ -386,7 +399,7 @@ and the derived files
% \begin{codesyntax}
% \SpecialUsageIndex{\mathtoolsset}\cs{mathtoolsset}\marg{key val list}
% \end{codesyntax}
-% Many of the tools shown in this manual can be turned on and off be
+% Many of the tools shown in this manual can be turned on and off by
% setting a switch to either true or false. In all cases it is done
% with the command \cs{mathtoolsset}. A typical use could be something like
% \begin{verbatim}
@@ -446,7 +459,7 @@ and the derived files
% these macros I find it better to read the article; an online
% version can be found at
% \begin{quote}
-% \url{http://www.tug.org/TUboat/Articles/tb22-4/tb72perlS.pdf}
+% \url{http://www.tug.org/TUGboat/Articles/tb22-4/tb72perlS.pdf}
% \end{quote}
% Note that the definitions shown in the article do not exactly
% match the definitions in \pkg{mathtools}. Besides providing an
@@ -650,6 +663,8 @@ and the derived files
% command \cs{adjustlimits} is useful in these cases, as you can
% just put it in front of these consecutive operators and it'll make
% the limits line up.
+% \medskip\par\noindent
+% \begin{minipage}{\textwidth}
% \begin{verbatim}
% \[
% \text{a)} \adjustlimits\lim_{n\to\infty} \max_{p\ge n} \quad
@@ -658,7 +673,8 @@ and the derived files
% \text{d)} \adjustlimits\limsup_{n\to\infty} \max_{p\ge n}
% \]
% \end{verbatim}
-% \[
+% \end{minipage}
+% \[
% \text{a)} \adjustlimits\lim_{n\to\infty} \max_{p\ge n} \quad
% \text{b)} \adjustlimits\lim_{n\to\infty} \max_{p^2\ge n} \quad
% \text{c)} \adjustlimits\lim_{n\to\infty} \sup_{p^2\ge nK} \quad
@@ -667,6 +683,42 @@ and the derived files
% The use of \cs{sb} instead of \texttt{\_} is allowed.
%
%
+% \subsubsection{Swapping space above \texorpdfstring{\AmS}{AMS} display math environments }
+% \label{sec:swapping}
+%
+% One feature that the plain old \env{equation} environment has that
+% the \AmS\ environments does not (because of thechnical reasons), is
+% the feature of using less space above the equation if the situation
+% presents itself. The \AmS\ environments cannot do this, but one can
+% manually, using
+% \begin{codesyntax}
+% \SpecialUsageIndex{\SwapAboveDisplaySkip}
+% \cs{SwapAboveDisplaySkip}
+% \end{codesyntax}
+% as the very first content within an \AmS\ display math
+% environment. It will then issue an \cs{abovedisplayshortskip}
+% instead of the normal \cs{abovedisplayskip}.
+%
+% Note it will not work with the \env{equation} or \env{multline} environments.
+%
+% Here is an example of the effect
+% \begin{verbatim}
+% \noindent\rule\textwidth{1pt}
+% \begin{align*} A &= B \end{align*}
+% \noindent\rule\textwidth{1pt}
+% \begin{align*}
+% \SwapAboveDisplaySkip
+% A &= B
+% \end{align*}
+% \end{verbatim}
+% \noindent\rule\textwidth{1pt}
+% \begin{align*} A &= B \end{align*}
+% \noindent\rule\textwidth{1pt}
+% \begin{align*}
+% \SwapAboveDisplaySkip
+% A &= B
+% \end{align*}
+%
%
% \subsection{Controlling tags}
%
@@ -732,6 +784,13 @@ and the derived files
% \usetagform{default}
% \end{verbatim}
%
+% \changes{v1.12}{2012/05/09}{Added caveat}
+% \noindent\textbf{Caveat regarding \pkg{ntheorem}}: If you like to
+% change the appearence of the tags \emph{and} you are also using the
+% \pkg{ntheorem} package, then please postpone the change of
+% appearance until \emph{after} loading \pkg{ntheorem}. (In order to
+% do its thing \pkg{ntheorem} has to mess with the tags\dots)
+%
% \subsubsection{Showing only referenced tags}
%
% \begin{codesyntax}
@@ -825,21 +884,23 @@ and the derived files
% Note that this feature only works if you use \cs{eqref} or
% \cs{refeq} to reference your equations.
%
-% When using \key{showonlyrefs} it might be usefull to be able to
-% actually add a few equation numbers without directly refering to
+% When using \key{showonlyrefs} it might be useful to be able to
+% actually add a few equation numbers without directly referring to
% them.
% \begin{codesyntax}
% \SpecialUsageIndex{\noeqref}\cs{noeqref}\marg{label,label,\dots}
% \end{codesyntax}
% \FeatureRequest{Rasmus Villemoes}{2008/03/26}
-% The syntax is somewhat similar to \cs{nocite}.
+% The syntax is somewhat similar to \cs{nocite}. If a label in the
+% list is undefined we will throw a warning in the same manner as
+% \cs{ref}.
%
% \medskip\noindent\textbf{BUG 1:} Unfortunately the use of the
% \key{showonlyref} introduce a bug within amsmath's typesetting
% of formula versus equation number. This bug manifest itself by
% allowing formulas to be typeset close to or over the equation
% number. Currently no general fix is known, other than making sure
-% that ones formulas are not long enough to touch the equation
+% that one's formulas are not long enough to touch the equation
% number.
%
% To make a long story stort, amsmath typesets its math environments
@@ -848,15 +909,15 @@ and the derived files
% number is recorded such that the formula or the equation number can
% be moved (if necessary) in the typesetting part. When
% \key{showonlyref} is enabled, the width of the equation number
-% depend on whether or not this number is refered~to. To determine
+% depend on whether or not this number is referred~to. To determine
% this, we need to know the current label. But the current label is
% \emph{not} known in the measuring phase. Thus the measured width is
-% always zero (because no label equals not refered to) and therefore
+% always zero (because no label equals not referred to) and therefore
% the typesetting phase does not take the equation number into
% account.
%
% \medskip\noindent\textbf{BUG 2:} Currently there is a bug between
-% \key{showonlyrefs} and the \pkg{ntheorem} package, then the
+% \key{showonlyrefs} and the \pkg{ntheorem} package, when the
% \pkg{ntheorem} option \key{thmmarks} is active. The shown equation
% numbers may come out wrong (seems to be multiplied by 2). The
% easiest fix is to add the following line
@@ -903,7 +964,7 @@ and the derived files
% extensible arrows are the only two of their kind defined by
% \pkg{amsmath}, but luckily \pkg{mathtools} helps with that. The
% extensible arrow-like symbols in \pkg{mathtools} follow the same
-% naming scheme as the ones in \pkg{amsmath} so to get an extensible
+% naming scheme as the one's in \pkg{amsmath} so to get an extensible
% \cs{Leftarrow} you simply do a
% \begin{verbatim}
% \[
@@ -991,7 +1052,7 @@ and the derived files
% \mathop{\thinboxed[blue]{\sum}}_{n}
% \mathop{\thinboxed[blue]{\LaTeXunderbrace{\thinboxed[green]{foof}}}}_{zzz}
% \]
-% \normalsize Now there's to little space between the brace and the
+% \normalsize Now there's too little space between the brace and the
% $zzz$ and also too little space between the brace and the $foof$.
% If you use Computer Modern you'll actually see that the $f$
% overlaps with the brace! Let's try in \cs{footnotesize}:
@@ -1122,8 +1183,8 @@ and the derived files
% the default is \cs{,}.
%
% As an extra trick the fences will behave as open and closing fences
-% inconstract to their auto-scaling nature.\footnote{\cs{left} and
-% \cs{right} does \emph{not} produce open an closing fences, thus
+% in constract to their auto-scaling nature.\footnote{\cs{left} and
+% \cs{right} do \emph{not} produce open and closing fences, thus
% the space before or after may be too large. Inside this
% construction they behave.}
%
@@ -1291,6 +1352,21 @@ and the derived files
% The environments \env{rcases}, \env{rcases*}, \env{drcases} and
% \env{drcases*} are equivalent to \env{cases} and \env{dcases}, but
% here the brace is placed on the right instead of on the left.
+% \begin{verbatim}
+% \[
+% \begin{rcases*}
+% x^2 & for $x>0$\\
+% x^3 & else
+% \end{rcases*} \quad \Rightarrow \cdots
+% \]
+% \end{verbatim}
+% \[
+% \begin{rcases*}
+% x^2 & for $x>0$\\
+% x^3 & else
+% \end{rcases*} \quad \Rightarrow\cdots
+% \]
+%
%
% \subsubsection{Emulating indented lines in alignments}
% \begin{codesyntax}
@@ -1298,7 +1374,7 @@ and the derived files
% \end{codesyntax}
% \ProvidedBy{Lars Madsen}{2008/06/05}
% In \cite{Swanson}, Ellen Swanson recommends that when ever one has
-% a long displayed formula, spannig several lines, and it is
+% a long displayed formula, spanning several lines, and it is
% unfeasible to align against a relation within the first line, then
% all lines in the display should be aligned at the left most edge of
% the first line, and all subsequent lines should be indented by 2em
@@ -1341,13 +1417,20 @@ and the derived files
%
% The \texttt{amsmath} package provie the \cs{boxed} macro to box
% material in math mode. But this of course will not work if the box
-% should cross an alignment point. We provide a macro that can.
+% should cross an alignment point. We provide a macro that
+% can.\footnote{Note that internally \cs{Aboxed} does use \cs{boxed}.}
% \hskip1sp
% \marginpar{%
% \parbox[b]{\marginparwidth}{\small\sffamily\raggedright
% \strut Evolved from a request by\\Merciadri Luca\\
% 2010/06/28\\on comp.text.tex%
-% }
+% }\strut
+% }%
+% \marginpar{\strut\\%
+% \parbox[b]{\marginparwidth}{\small\sffamily\raggedright
+% \strut Reimplemented by\\Florent Chervet (GL) \\
+% 2011/06/11\\on comp.text.tex%
+% }\strut
% }%
% \begin{codesyntax}
% \SpecialEnvIndex{\Aboxed}\cs{Aboxed}\marg{left hand side
@@ -1365,10 +1448,28 @@ and the derived files
% \Aboxed{ f(x) & = \int h(x)\, dx} \\
% & = g(x)
% \end{align*}
-%
+% One can have multiple boxes on each line, and the
+% >>\texttt{\textnormal{\&}}\quad right hand side<< can even be
+% missing. Here is an example of how the padding in the box can be changed
+% \begin{verbatim}
+% \begin{align*}
+% \setlength\fboxsep{1em}
+% \Aboxed{ f(x) &= 0 } & \Aboxed{ g(x) &= b} \\
+% \Aboxed{ h(x) } & \Aboxed{ i(x) }
+% \end{align*}
+% \end{verbatim}
+% \begin{align*}
+% \setlength\fboxsep{1em}
+% \Aboxed{ f(x) &= 0 } & \Aboxed{ g(x) &= b} \\
+% \Aboxed{ h(x) } & \Aboxed{ i(x) }
+% \end{align*}
+% Note how the \cs{fboxsep} change only affect the box coming
+% immediately after it.
%
% \subsubsection{Adding arrows between lines in an alignment}
%
+% This first macro is a bit misleading, it is only intended to be
+% used in combination with the \env{alignat(*)} environment.
% \begin{codesyntax}
% \SpecialEnvIndex{\ArrowBetweenLines}\cs{ArrowBetweenLines}\oarg{symbol}\\
% \SpecialEnvIndex{\ArrowBetweenLines*}\cs{ArrowBetweenLines*}\oarg{symbol}
@@ -1381,20 +1482,21 @@ and the derived files
% }
% }%
% To add, say $\Updownarrow$ between two lines in an alignment use
-% \cs{ArrowBetweenLines} and the \env{alignat} environment:
+% \cs{ArrowBetweenLines} and the \env{alignat} environment (note the
+% extra pair of \texttt{\&}'s in front):
% \begin{verbatim}
-% \begin{alignat*}{2}
+% \begin{alignat}{2}
% && \framebox[1.5cm]{} &= \framebox[3cm]{}\\
% \ArrowBetweenLines % \Updownarrow is the default
% && \framebox[1.5cm]{} &= \framebox[2cm]{}
-% \end{alignat*}
+% \end{alignat}
% \end{verbatim}
% resulting in
-% \begin{alignat*}{2}
+% \begin{alignat}{2}
% && \framebox[1.5cm]{} &= \framebox[3cm]{}\\
% \ArrowBetweenLines
% && \framebox[1.5cm]{} &= \framebox[2cm]{}
-% \end{alignat*}
+% \end{alignat}
% Note the use of \verb+&&+ starting each \emph{regular} line of
% math. For adding the arrow on the right, use
% \cs{ArrowBetweenLines*}\oarg{symbol}, and end each line of math
@@ -1457,7 +1559,7 @@ and the derived files
% & = d
% \end{align*}
% Thus \verb?\vdotswithin{=}? create a box corersponding to
-% \verb?{}={}? and typeset a $\vdots$ centered inside it. When doing
+% \verb?{}={}? and typeset a >>$\vdots$<< centered inside it. When doing
% this as a normal line in an alignment leaves us with excessive space
% which \verb?\shortvdotswithin{=}? takes care with for us.
%
@@ -1496,7 +1598,7 @@ and the derived files
% indicated. Their original values are \verb?2.15\origjot? and
% \verb?\origjot? respectively (\verb?\origjot? is usually 3pt).
%
-% \subsection{Short intertext}
+% \subsection{Intertext and short intertext}
%
%
% \begin{codesyntax}
@@ -1504,7 +1606,7 @@ and the derived files
% \end{codesyntax}
% \cttPosting{Gabriel Zachmann and Donald Arseneau}{2000/05/12--13}
% \pkg{amsmath} provides the command \cs{intertext} for interrupting
-% a multi line display while still maintaining the alignment points.
+% a multiline display while still maintaining the alignment points.
% However the spacing often seems quite excessive as seen below.
% \begin{verbatim}
% \begin{align}
@@ -1530,9 +1632,57 @@ and the derived files
% c&=d
% \end{align}
%
+% \noindent
+% It turns out that both \cs{shortintertext} and the original
+% \cs{intertext} from \pkg{amsmath} has a slight problem. If we use
+% the \env{spreadlines} (see section~\ref{sec:spread}) to open up
+% the equations in a multiline calculation, then this opening up
+% value also applies to the spacing above and below the original
+% \cs{shortintertext} and \cs{intertext}. \tsxPosting{Tobias Weh
+% \\(referring to a suggestion by Chung-chieh Shan)}{2011/05/29}
+% It can be illustrated using the following example, an interested
+% reader, can apply it with and with out the original \cs{intertext}
+% and \cs{shortintertext}.
+% \begin{verbatim}
+% % the original \intertext and \shortintertext
+% \mathtoolsset{original-intertext,original-shortintertext}
+% \newcommand\myline{\par\noindent\rule{\textwidth}{1mm}}
+% \myline
+% \begin{spreadlines}{1em}
+% \begin{align*}
+% AA\\ BB\\ \intertext{\myline}
+% AA\\ BB\\ \shortintertext{\myline}
+% AA\\ BB
+% \end{align*}
+% \end{spreadlines}
+% \myline
+% \end{verbatim}
%
+% We now fix this internaly for both \cs{intertext} and
+% \cs{shortintertext}, plus we add the posibility to fine tune
+% spacing around these constructions. The original versions can be
+% brought back using the \texttt{original-x} keys below.
+% \begin{codesyntax}
+% \SpecialUsageIndex{\intertext}\cs{intertext}\marg{text}\\
+% \SpecialUsageIndex{\shortintertext}\cs{shortintertext}\marg{text}\\
+% \SpecialKeyIndex{original-intertext}$\key{original-intertext}=\texttt{true}\vert\texttt{false}$ \quad(default: \texttt{false})\\
+% \SpecialKeyIndex{original-shortintertext}$\key{original-shortintertext}=\texttt{true}\vert\texttt{false}$
+% \quad(default: \texttt{false})\\
+% \SpecialKeyIndex{above-intertext-dim}$\key{above-intertext-dim}=\meta{dimen}$ \quad(default: 0pt)\\
+% \SpecialKeyIndex{below-intertext-dim}$\key{below-intertext-dim}=\meta{dimen}$ \quad(default: 0pt)\\
+% \SpecialKeyIndex{above-shortintertext-dim}$\key{above-shortintertext-dim}=\meta{dimen}$ \quad(default: 3pt)\\
+% \SpecialKeyIndex{below-shortintertext-dim}$\key{below-shortintertext-dim}=\meta{dimen}$ \quad(default: 3pt)
+% \end{codesyntax}
+% The updated \cs{shortintertext} will look like the original version
+% unless for areas with an enlarged \cs{jot} value (see for example
+% the \env{spreadlines}, section~\ref{sec:spread}). Whereas \cs{intertext}
+% will have a slightly smaller value above and below (corresponding
+% to about 3pt less space above and below), the spacing around
+% \cs{intertext} should now match the normal spacing going into and
+% out of an \env{align}.
%
-%
+% \textbf{Tip:} \cs{intertext} and \cs{shortintertext} also works
+% within \env{gather}.
%
% \subsection{Paired delimiters}
%
@@ -1630,22 +1780,22 @@ and the derived files
% More interestingly we can refer to the size inside the
% \meta{code}. Here we do a weird three argument `braket'
% \begin{verbatim}
-% \DeclarePairedDelimiterX\brakket[3]{\langle}{\rangle}%
+% \DeclarePairedDelimiterX\braket[3]{\langle}{\rangle}%
% {#1\,\delimsize\vert\,#2\,\delimsize\vert\,#3}
% \end{verbatim}
% Then we can get
% \DeclarePairedDelimiterX\innerp[2]{\langle}{\rangle}{#1,#2}
-% \DeclarePairedDelimiterX\brakket[3]{\langle}{\rangle}%
+% \DeclarePairedDelimiterX\braket[3]{\langle}{\rangle}%
% {#1\,\delimsize\vert\,#2\,\delimsize\vert\,#3}
% \begin{verbatim}
% \[
% \innerp*{A}{ \frac{1}{2} } \quad
-% \brakket[\Big]{B}{\sum_{k} f_k}{C}
+% \braket[\Big]{B}{\sum_{k} f_k}{C}
% \]
% \end{verbatim}
% \[
% \innerp*{A}{ \frac{1}{2} } \quad
-% \brakket[\Big]{B}{\sum_{k}}{C}
+% \braket[\Big]{B}{\sum_{k}}{C}
% \]
% \iffalse
% \bigskip
@@ -1669,6 +1819,38 @@ and the derived files
% is a feature of the \cs{left}\dots\cs{right} construction).
% \fi
%
+%
+% \subsubsection{Expert use}
+%
+% Within the starred version of \cs{DeclarePairedDelimiter} and
+% \cs{DeclarePairedDelimiterX} we make a few changes such that the
+% auto scaled \cs{left} and \cs{right} fences behave as opening and
+% closing fences, i.e.\ $\sin(x)$ vs. $\sin\left(x\right)$ (the later
+% made via \verb|$\sin\left(x\right)$|), notice the gab between
+% '$\sin$' and '('. In some special cases it may be useful to be
+% able to tinker with the behavior.
+% \begin{codesyntax}
+% \SpecialUsageIndex{\reDeclarePairedDelimiterInnerWrapper}\cs{reDeclarePairedDelimiterInnerWrapper}\marg{macro name}\marg{\textnormal{\texttt{star}} or \textnormal{\texttt{nostar}}}\marg{code}
+% \end{codesyntax}
+% Internally several macros are created, including two call backs
+% that take care of the formatting. There is one internal macro for
+% the starred version, labeled \texttt{star}, the other one is
+% labeled \texttt{nostar}. Within \meta{code}, \texttt{\#1} will be
+% replaced by the scaled left fence, \texttt{\#3} the corresponding
+% scaled right fence, and \texttt{\#2} the stuff in between. For
+% example, here is how one might turn the content into \cs{mathinner}:
+% \begin{verbatim}
+% \DeclarePairedDelimiter\abs\lvert\rvert
+% \reDeclarePairedDelimiterInnerWrapper\abs{star}{#1#2#3}
+% \reDeclarePairedDelimiterInnerWrapper\abs{nostar}{\mathinner{#1#2#3}}
+% \end{verbatim}
+% The default values for the call backs corresponds to
+% \begin{verbatim}
+% star: \mathopen{}\mathclose\bgroup #1#2\aftergroup\egroup #3
+% nostar: \mathopen{#1}#2\mathclose{#3}
+% \end{verbatim}
+%
+%
% \subsection{Special symbols}
%
% This part of the manual is about special symbols. So far only one
@@ -1728,7 +1910,7 @@ and the derived files
% \medskip
% \noindent\textbf{Warning:} \texttt{centercolon} \emph{does not}
% work with languages that make use of an active colon, most notably
-% French. Sadly the \texttt{babel} package does not distinguish
+% \emph{French}. Sadly the \texttt{babel} package does not distinguish
% between text and math when it comes to active characters. Nor does
% it provide any hooks to deal with math. So currently no general
% solution exists for this problem.
@@ -1781,7 +1963,8 @@ and the derived files
% \SpecialUsageIndex{\bigtimes}\cs{bigtimes}
% \end{codesyntax}
%
-% \emph{Note:} that these symbols are constructed via
+% \noindent
+% \textbf{Note:} that these symbols are constructed via
% features from the \pkg{graphicx} package, and thus may not display
% correctly in most DVI previewers. Also note that \cs{nuparrow} and
% \cs{ndownarrow} are constructed via \cs{nrightarrow} and
@@ -1914,7 +2097,8 @@ and the derived files
% \myisotope{A}{Z}{X}\to \myisotope{A-4}{Z-2}{Y}+
% \myisotope{4}{2}{\alpha}
% \]
-%
+% (Though a package like \pkg{mhchem} might be more suitable for this
+% type of material.)
%
% \subsection{Declaring math sizes}
%
@@ -1935,7 +2119,7 @@ and the derived files
% been fixed in \LaTeX, this fix will be removed from
% \pkg{mathtools}.
%
-% \subsection{Spreading equations}
+% \subsection{Spreading equations}\label{sec:spread}
%
% \begin{codesyntax}
% \SpecialEnvIndex{spreadlines}
@@ -1943,7 +2127,7 @@ and the derived files
% \cs{end}\arg{spreadlines}
% \end{codesyntax}
% \cttPosting{Michael J.~Downes}{2002/10/17}
-% The spacing between lines in a multi line math environment such as
+% The spacing between lines in a multiline math environment such as
% \env{gather} is governed by the dimension \cs{jot}. The
% \env{spreadlines} environment takes one argument denoting the
% value of \cs{jot} inside the environment:
@@ -2049,7 +2233,7 @@ and the derived files
% \SpecialUsageIndex{\splitdfrac}\cs{splitdfrac}\marg{numer}\marg{denom}
% \end{codesyntax}
% \cttPosting{Michael J.~Downes}{2001/12/06}
-% These commands provide split fractions e.g., multi line fractions:
+% These commands provide split fractions e.g., multiline fractions:
% \begin{verbatim}
% \[
% a=\frac{
@@ -2213,7 +2397,7 @@ and the derived files
% \begin{macrocode}
%<*package>
\ProvidesPackage{mathtools}%
- [2011/04/06 v1.11 mathematical typesetting tools]
+ [2012/04/24 v1.12 mathematical typesetting tools]
% \end{macrocode}
% \changes{v1.10}{2011/02/12}{Might as well make sure that we need the
% latest version of \texttt{mhsetup}}
@@ -2410,7 +2594,9 @@ and the derived files
% \end{macrocode}
% We test if the equation was labelled. We already know if it was
% tagged manually. Have to watch out for \TeX\ inserting a blank line
-% so do not let the tag have width zero.
+% so do not let the tag have width zero. Rememeber
+% \cs{@safe@activestrue/false} in order to handle active chars in labels.
+% \changes{v1.12}{2012/04/24}{Added \cs{@safe@activestrue/false}}
% \begin{macrocode}
\if_meaning:NN \df@label\@empty
\MH_if_boolean:nTF {manual_tag}% this was \MH_if_boolean:nT before
@@ -2422,14 +2608,27 @@ and the derived files
\MH_if_boolean:nTF {manual_tag}
{ \MH_if_boolean:nTF {show_manual_tags}
{ \MT_prev_tagform:n {#1} }
- { \@ifundefined{MT_r_\df@label}
- { }
+ { \@safe@activestrue
+ \@ifundefined{MT_r_\df@label}
+% \end{macrocode}
+% Next we need to remember to deactivate the manual tags switch. This
+% is usually done using \verb|\MT_extended_maketag:n|, but this is not
+% the case if the show manual tags is false and the manual tag is not
+% referred to.
+% \changes{v1.12}{2011/06/08}{Added the falsification of manual tag
+% when show manual tags is off and maual tag is not referred to}
+% \begin{macrocode}
+ { \global\MH_set_boolean_F:n {manual_tag} }
{ \MT_prev_tagform:n {#1} }
+ \@safe@activesfalse
}
}
- { \@ifundefined{MT_r_\df@label}
+ {
+ \@safe@activestrue
+ \@ifundefined{MT_r_\df@label}
{ }
{ \refstepcounter{equation}\MT_prev_tagform:n {#1} }
+ \@safe@activesfalse
}
\fi:
\global\MH_set_boolean_T:n {raw_maketag}
@@ -2438,6 +2637,7 @@ and the derived files
% \end{macro}
% \begin{macro}{\MT_extended_maketag:n}
% The extended version of \cs{maketag@@@}.
+% \changes{v1.12}{2012/04/24}{Added \cs{@safe@activestrue/false}}
% \begin{macrocode}
\def\MT_extended_maketag:n #1{
\ifx\df@label\@empty
@@ -2447,16 +2647,18 @@ and the derived files
{
\MH_if_boolean:nTF {show_manual_tags}
{ \MT_maketag:n {#1} }
- { \@ifundefined{MT_r_\df@label}
+ { \@safe@activestrue
+ \@ifundefined{MT_r_\df@label}
{ }
{ \MT_maketag:n {#1} }
+ \@safe@activesfalse
}
}
{ \MT_maketag:n {#1} }
\fi:
% \end{macrocode}
% As this function is always called we let it set the marker for a manual
-% tag false when exiting.
+% tag false when exiting (well actually not true, see above).
% \begin{macrocode}
\global\MH_set_boolean_F:n {manual_tag}
}
@@ -2593,19 +2795,45 @@ and the derived files
%
% \begin{macro}{\noeqref}
% \changes{v1.04}{2008/03/26}{Added \cs{noeqref} (daleif)}
-% Macro for adding numbers to non-refered equations. Syntax similar
+% \changes{v1.12}{2012/04/20}{Labels containing active chars (babel)
+% are now allowed}
+% \changes{v1.12}{2012/04/24}{\cs{noeqref} will now make a reference
+% warning if users use undefined labels in \cs{noeqref}, requested
+% by Tue Christensen}
+% Macro for adding numbers to non-referred equations. Syntax similar
% to \cs{nocite}.
% \begin{macrocode}
\MHInternalSyntaxOff
\newcommand\noeqref[1]{\@bsphack
\@for\@tempa:=#1\do{%
+ \@safe@activestrue%
\edef\@tempa{\expandafter\@firstofone\@tempa}%
+ \@ifundefined{r@\@tempa}{%
+ \protect\G@refundefinedtrue%
+ \@latex@warning{Reference `\@tempa' on page \thepage \space
+ undefined (\string\noeqref)}%
+ }{}%
\if@filesw\protected@write\@auxout{}%
- {\string\MT@newlabel{\@tempa}}\fi}
+ {\string\MT@newlabel{\@tempa}}\fi%
+ \@safe@activesfalse}
\@esphack}
-\MHInternalSyntaxOn
+
% \end{macrocode}
% \end{macro}
+%
+% \begin{macro}{\@safe@activestrue}
+% \begin{macro}{\@safe@activesfalse}
+% These macros are provided by babel. We \emph{provide} them here,
+% just to make sure they exist.
+% \begin{macrocode}
+\providecommand\@safe@activestrue{}%
+\providecommand\@safe@activesfalse{}%
+
+\MHInternalSyntaxOn
+% \end{macrocode}
+%
+% \end{macro}
+% \end{macro}
%
% \subsection{Extensible arrows etc.}
%
@@ -3234,6 +3462,41 @@ and the derived files
%
% \subsection{Paired delimiters}
%
+% \changes{v1.13}{2012/05/10}{Extended \cs{DeclarePairedDelimiter(X)}}
+% \begin{macro}{\MT_delim_default_inner_wrappers:n}
+% In some cases users may want to control the internals a bit more. We
+% therefore create two call back macros each time the
+% \cs{DeclarePaired...} macro is issued. The default value of these
+% call backs are provided by |\MT_delim_default_inner_wrappers:n|
+% \begin{macrocode}
+\newcommand\MT_delim_default_inner_wrappers:n [1]{
+ \@namedef{MT_delim_\MH_cs_to_str:N #1 _star_wrapper:nnn}##1##2##3{
+ \mathopen{}\mathclose\bgroup ##1 ##2 \aftergroup\egroup ##3
+ }
+ \@namedef{MT_delim_\MH_cs_to_str:N #1 _nostar_wrapper:nnn}##1##2##3{
+ \mathopen{##1}##2\mathclose{##3}
+ }
+ }
+
+% \end{macrocode}
+% \begin{macro}{\reDeclarePairedDelimiterInnerWrapper}
+% Macro enabling the user to alter an existing call back. Note that
+% currently no checks are performed. First argument is the name of
+% the macro we are altering (as defined via \cs{DeclarePaired...}),
+% the second is \texttt{star} or \texttt{nostar}. In the last
+% argument \texttt{\#1} and \texttt{\#3} respectively refer to the
+% scaled fences and \texttt{\#3} refer to whatever come between.
+% \begin{macrocode}
+\newcommand\reDeclarePairedDelimiterInnerWrapper[3]{
+ \@namedef{MT_delim_\MH_cs_to_str:N #1 _ #2 _wrapper:nnn}##1##2##3{
+ #3
+ }
+}
+
+% \end{macrocode}
+%
+% \end{macro}
+% \end{macro}
% \begin{macro}{\DeclarePairedDelimiter}
% \changes{v1.06}{2008/08/01}{Made user command robust}
% This macro defines |#1| to be a control sequence that takes either
@@ -3247,9 +3510,13 @@ and the derived files
% \changes{1.08e}{2010/09/02}{`Fixed' \cs{left}\dots\cs{right} bad spacing}
% \changes{1.08e}{2010/09/14}{redid the \cs{left}\dots\cs{right} fix,
% see \cs{DeclarePairedDelimiterX} for details.}
+% \changes{v1.13}{2012/05/10}{Using call back instead}
% \begin{macrocode}
+ \MT_delim_default_inner_wrappers:n{#1}
\@namedef{MT_delim_\MH_cs_to_str:N #1 _star:}##1
- {\mathopen{}\mathclose\bgroup\left#2 ##1 \aftergroup\egroup\right #3}%
+ %{\mathopen{}\mathclose\bgroup\left#2 ##1 \aftergroup\egroup\right #3}%
+ { \@nameuse{MT_delim_\MH_cs_to_str:N #1 _star_wrapper:nnn}%
+ {\left#2}{##1}{\right#3} }%
% \end{macrocode}
% The command with optional argument. It should be \cs{bigg} or
% alike.
@@ -3262,9 +3529,15 @@ and the derived files
% \end{macrocode}
% With the default optional argument we wind up with \cs{relax},
% else we get \cs{biggr} and \cs{biggl} etc.
-% \begin{macrocode}
- \mathopen{\@nameuse {\MH_cs_to_str:N ##1 l} #2} ##2
- \mathclose{\@nameuse {\MH_cs_to_str:N ##1 r} #3}}
+% \changes{v1.13}{2012/05/10}{Using call back instead}
+% \begin{macrocode}
+ %\mathopen{\@nameuse {\MH_cs_to_str:N ##1 l} #2} ##2
+ %\mathclose{\@nameuse {\MH_cs_to_str:N ##1 r} #3}}
+ \@nameuse{MT_delim_\MH_cs_to_str:N #1 _nostar_wrapper:nnn}%
+ {\@nameuse {\MH_cs_to_str:N ##1 l} #2}
+ {##2}
+ {\@nameuse {\MH_cs_to_str:N ##1 r} #3}
+ }
% \end{macrocode}
% The user command comes here. Just check for the star and choose
% the right internal command.
@@ -3286,7 +3559,8 @@ and the derived files
% can specify the number of arguments the created macro has, and they
% can specify the code for the inner part of the macro. Other than
% that the code is fairly similar to \cs{DeclarePairedDelimiter}
-% \changes{v1.08e}{2010/09/02}{Provided better implementation of \cs{DeclarePairedDelimiterX}}
+% \changes{v1.08e}{2010/09/02}{Provided better implementation of
+% \cs{DeclarePairedDelimiterX}}
% \begin{macrocode}
\def\MHempty{}
\def\DeclarePairedDelimiterX#1[#2]#3#4#5{%
@@ -3304,6 +3578,11 @@ and the derived files
\fi
\fi
% \end{macrocode}
+% \changes{v1.13}{2012/05/10}{Using call back instead}
+% Initiate the default call backs.
+% \begin{macrocode}
+ \MT_delim_default_inner_wrappers:n{#1}
+% \end{macrocode}
% We make sure to store the delimiter size in the local variable
% \cs{delimsize}. Then users can refer to the size in the fifth
% argument. In the starred version it will refer to \cs{middle} and in
@@ -3315,16 +3594,20 @@ and the derived files
[#2]
{
\begingroup
- \def\delimsize{\middle}
+ \def\delimsize{\middle}
% \end{macrocode}
% This is slightly controversial, \cs{left}\dots\cs{right} are known
% to produce an inner atom, thus may cause different spacing than
-% normal delimiters. We `fix' this by introducing \cs{mathopen} and \cs{mathclose}:
+% normal delimiters. We `fix' this by introducing \cs{mathopen} and
+% \cs{mathclose}. This change is now factored out into call backs.
% \changes{v1.08e}{2010/09/14}{redid the left/right fix, inspired by
% ctt thread named `spacing after \cs{right}) and before \cs{left})'
% started 2010-08-12.}
+% \changes{v1.13}{2012/05/10}{Using call back instead}
% \begin{macrocode}
- \mathopen{}\mathclose\bgroup\left#3 #5 \aftergroup\egroup\right#4
+ %\mathopen{}\mathclose\bgroup\left#3 #5 \aftergroup\egroup\right#4
+ \@nameuse{MT_delim_\MH_cs_to_str:N #1 _star_wrapper:nnn}
+ {\left#3}{#5}{\right#4}
\endgroup
}
% \end{macrocode}
@@ -3353,19 +3636,30 @@ and the derived files
% \end{macrocode}
% Next we provide the inner workhorse. We need a bit of expansion
% magic to get \cs{delimsize} to work.
+% \changes{v1.13}{2012/05/10}{Using call back instead}
% \begin{macrocode}
\@xp\@xp\@xp
\newcommand
\@xp\csname MT_delim_\MH_cs_to_str:N #1 _nostar_inner:\endcsname
[#2]
{
- \mathopen{%
+ %\mathopen{%
+ % \let\MHempty\@gobble
+ % \@xp\@xp\@xp\csname\@xp\MH_cs_to_str:N \delimsize l\endcsname #3}
+ %#5
+ %\mathclose{%
+ % \let\MHempty\@gobble
+ % \@xp\@xp\@xp\csname\@xp\MH_cs_to_str:N \delimsize r\endcsname #4}
+ \@nameuse{MT_delim_\MH_cs_to_str:N #1 _nostar_wrapper:nnn}
+ {
\let\MHempty\@gobble
- \@xp\@xp\@xp\csname\@xp\MH_cs_to_str:N \delimsize l\endcsname #3}
- #5
- \mathclose{%
+ \@xp\@xp\@xp\csname\@xp\MH_cs_to_str:N \delimsize l\endcsname #3
+ }
+ {#5}
+ {
\let\MHempty\@gobble
- \@xp\@xp\@xp\csname\@xp\MH_cs_to_str:N \delimsize r\endcsname #4}
+ \@xp\@xp\@xp\csname\@xp\MH_cs_to_str:N \delimsize r\endcsname #4
+ }
\endgroup
}
\DeclareRobustCommand{#1}{
@@ -3909,6 +4203,23 @@ and the derived files
}
% \end{macrocode}
% \end{macro}
+%
+% \subsection{Swapping above display skip}
+%
+% \begin{macro}{\SwapAboveDisplaySkip}
+% This macro is intended to be used at the start of \AmS\
+% environments, in order to force it to use
+% \cs{abovedisplayshortskip} instead of \cs{abovedisplayskip} above
+% the displayed math. Because of the use of \cs{noalign} it will not
+% work inside \env{equation} or \env{multline}.
+% \begin{macrocode}
+\newcommand\SwapAboveDisplaySkip{%
+ \noalign{\vskip-\abovedisplayskip\vskip\abovedisplayshortskip}
+}
+
+% \end{macrocode}
+%
+% \end{macro}
%
% \subsection{An aid to alignment}
%
@@ -3916,48 +4227,39 @@ and the derived files
% \changes{v1.05}{2008/06/05}{Added \cs{MoveEqLeft} (daleif)}
% \changes{v1.05b}{2008/06/18}{We don't need \cs{setlength} here
% (daleif), after discussion about \cs{global} and \cs{setlength}
-% on ctt} This is a very simple macro, we `move' a line in an
+% on ctt}
+% \changes{v1.12}{2011/06/12}{We don't even need lengths. GL
+% suggested on ctt to just apply them directly.}
+% This is a very simple macro, we `move' a line in an
% alignment backwards in order to simulate that all subsequent lines
% have been indented. Note that simply using \verb+\kern-2m+ after
% the \verb+&+ is not enough, then the alignemnt environment never
% detects that there is anything (though simulated) in the cell
% before the \verb+&+.
% \begin{macrocode}
-\newcommand\MoveEqLeft[1][2]{%
- \global\@tempdima=#1em%
- \kern\@tempdima%
- &
- \kern-\@tempdima}
+\newcommand\MoveEqLeft[1][2]{\kern #1em & \kern -#1em}
% \end{macrocode}
% \end{macro}
%
% \begin{macro}{\Aboxed}
% \changes{v1.08}{2010/06/29}{Added \cs{Aboxed}}
% The idea from \cs{MoveEqLeft} can be used for other things. Here we
-% create a macro that will allow a user to box a single line in an
+% create a macro that will allow a user to box an equation inside an
% alignment.
+% \changes{v1.12}{2011/08/17}{\cs{Aboxed} reimplemented, cudos to GL}
% \begin{macrocode}
-\newcommand\Aboxed[1]{\@Aboxed#1\ENDDNE}
+\newcommand\Aboxed[1]{\let\bgroup{\romannumeral-`}\@Aboxed#1&&\ENDDNE}
% \end{macrocode}
-% Idea: get the left and right part
-% typeset them in a \cs{boxed} AFTER an \& and pull it backwards
-% but in order to get the horizontal placement to work. As with
-% \cs{MoveEqLeft} we need to set some appropriate space to the left
-% of the \& .
-% \changes{v1.11}{2011/04/06}{Removed unnessary \{\} pair}
+% The macro has been reimplemented courtesy of Florent Chervet out of
+% a posting on ctt, \url{https://groups.google.com/group/comp.text.tex/browse_thread/thread/5d66395f2a1b5134/93fd9661484bd8d8?#93fd9661484bd8d8}
% \begin{macrocode}
-\def\@Aboxed#1&#2\ENDDNE{%
- \settowidth\@tempdima{$\displaystyle#1$}%
- \addtolength\@tempdima{\fboxsep}%
- \addtolength\@tempdima{\fboxrule}%
- \global\@tempdima=\@tempdima
- \kern\@tempdima
- &
- \kern-\@tempdima
- \boxed{#1#2}
+\def\@Aboxed#1&#2&#3\ENDDNE{%
+ \ifnum0=`{}\fi \setbox \z@
+ \hbox{$\displaystyle#1{}\m@th$\kern\fboxsep \kern\fboxrule }%
+ \edef\@tempa {\kern \wd\z@ &\kern -\the\wd\z@ \fboxsep
+ \the\fboxsep \fboxrule \the\fboxrule }\@tempa \boxed {#1#2}%
}
% \end{macrocode}
-%
% \end{macro}
%
% \begin{macro}{\ArrowBetweenLines}
@@ -4202,16 +4504,126 @@ and the derived files
%
% \section{Macros by other people}
%
-% \subsection{Short intertext}
+% \subsection{Intertext and short intertext}
+%
+% It turns out that \cs{intertext} use a bit too much
+% space. Especially noticable if combined with the \env{spreadlines}
+% environment, the extra space is also applied above and below
+% \cs{intertext}, which ends up looking unproffesional. Chung-chieh
+% Shan
+% (\url{http://conway.rutgers.edu/~ccshan/wiki/blog/posts/Beyond_amsmath/})
+% via Tobias Weh suggested a fix. We apply it here, but also keep the
+% original \cs{intertext} in case a user would rather want it.
+% \begin{macro}{\MT_orig_intertext:}
+% \begin{macro}{\MT_intertext:}
+% \begin{macro}{\l_MT_above_intertext_dim}
+% \begin{macro}{\l_MT_below_intertext_dim}
+% First store the originam Ams version.
+% \begin{macrocode}
+\MH_let:NwN \MT_orig_intertext: \intertext@
+% \end{macrocode}
+% And then for some reconfiguration. First a few lengths
+% \begin{macrocode}
+\newdimen\l_MT_above_intertext_dim
+\newdimen\l_MT_below_intertext_dim
+\define@key{\MT_options_name:}
+ {aboveintertextdim}{\setlength\l_MT_above_interetext_dim{#1}}
+\define@key{\MT_options_name:}
+ {belowintertextdim}{\setlength\l_MT_below_intertext_dim{#1}}
+% \end{macrocode}
+% Their default values are zero. Now for our extended version of
+% CCShan's solution.
+% \begin{macrocode}
+\def\MT_intertext: {%
+ \def\intertext##1{%
+ \ifvmode\else\\\@empty\fi
+ \noalign{%
+ \penalty\postdisplaypenalty\vskip\belowdisplayskip
+ \vskip-\lineskiplimit % CCS
+ \vskip\normallineskiplimit % CCS
+ \vskip\l_MT_above_intertext_dim
+ \vbox{\normalbaselines
+ \ifdim\linewidth=\columnwidth
+ \else \parshape\@ne \@totalleftmargin \linewidth
+ \fi
+ \noindent##1\par}%
+ \penalty\predisplaypenalty\vskip\abovedisplayskip%
+ \vskip-\lineskiplimit % CCS
+ \vskip\normallineskiplimit % CCS
+ \vskip\l_MT_above_intertext_dim
+ }%
+}}
+% \end{macrocode}
+% And provide a key to switch
+% \begin{macrocode}
+\def\MT_orig_intertext_true: { \MH_let:NwN \intertext@ \MT_orig_intertext: }
+\def\MT_orig_intertext_false: { \MH_let:NwN \intertext@ \MT_intertext: }
+\define@key{\MT_options_name:}{original-intertext}[true]{
+ \@nameuse{MT_orig_intertext_#1:}
+}
+% \end{macrocode}
+% And use the new version as default.
+% \begin{macrocode}
+\setkeys{\MT_options_name:}{
+ original-intertext=false
+}
+% \end{macrocode}
+%
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
%
% Gabriel Zachmann, Donald Arseneau on comp.text.tex 2000/05/12-13
% \begin{macro}{\shortintertext}
-% This is like \cs{intertext} but uses shorter skips betweeb the math.
+% \begin{macro}{\MT_orig_shortintertext}
+% \begin{macro}{\MT_shortintertext}
+% \begin{macro}{\l_above_shortintertext_dim}
+% \begin{macro}{\l_below_shortintertext_dim}
+% This is like \cs{intertext} but uses shorter skips between the
+% math. Again this turned out to have the same problem as
+% \cs{intertext}, so we provide two versions.
+% \begin{macrocode}
+\def\MT_orig_shortintertext:n #1{%
+ \ifvmode\else\\\@empty\fi
+ \noalign{%
+ \penalty\postdisplaypenalty\vskip\abovedisplayshortskip
+ \vbox{\normalbaselines
+ \if_dim:w \linewidth=\columnwidth
+ \else:
+ \parshape\@ne \@totalleftmargin \linewidth
+ \fi:
+ \noindent#1\par}%
+ \penalty\predisplaypenalty\vskip\abovedisplayshortskip%
+ }%
+}
+% \end{macrocode}
+% Lengths like above
+% \begin{macrocode}
+\newdimen\l_MT_above_shortintertext_dim
+\newdimen\l_MT_below_shortintertext_dim
+\define@key{\MT_options_name:}
+ {aboveshortintertextdim}{\setlength \l_MT_above_shortintertext_dim{#1}}
+\define@key{\MT_options_name:}
+ {belowshortintertextdim}{\setlength \l_MT_below_shortintertext_dim{#1}}
+% \end{macrocode}
+% Looks best with the `old' values of the original \cs{jot}
+% setting. So we set them to 3pt each.
+% \begin{macrocode}
+\setkeys{\MT_options_name:}{
+ aboveshortintertextdim=3pt,
+ belowshortintertextdim=3pt
+}
+% \end{macrocode}
+% Next, just add the same as we did for \cs{intertext}
% \begin{macrocode}
-\def\shortintertext#1{%
+\def\MT_shortintertext:n #1{%
\ifvmode\else\\\@empty\fi
\noalign{%
\penalty\postdisplaypenalty\vskip\abovedisplayshortskip
+ \vskip-\lineskiplimit
+ \vskip\normallineskiplimit
+ \vskip\l_MT_above_shortintertext_dim
\vbox{\normalbaselines
\if_dim:w \linewidth=\columnwidth
\else:
@@ -4219,9 +4631,30 @@ and the derived files
\fi:
\noindent#1\par}%
\penalty\predisplaypenalty\vskip\abovedisplayshortskip%
+ \vskip-\lineskiplimit
+ \vskip\normallineskiplimit
+ \vskip\l_MT_below_shortintertext_dim
}%
}
% \end{macrocode}
+% Next we need to be able to switch.
+% \begin{macrocode}
+\def\MT_orig_shortintertext_true: { \MH_let:NwN \shortintertext \MT_orig_shortintertext:n }
+\def\MT_orig_shortintertext_false: { \MH_let:NwN \shortintertext \MT_shortintertext:n }
+\define@key{\MT_options_name:}{original-shortintertext}[true]{
+ \@nameuse{MT_orig_shortintertext_#1:}
+}
+% \end{macrocode}
+% With the updated one as the default.
+% \begin{macrocode}
+\setkeys{\MT_options_name:}{
+ original-shortintertext=false
+}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
% \end{macro}
%
% \subsection{Fine-tuning mathematical layout}
@@ -4447,13 +4880,24 @@ and the derived files
% December~20th 2000 by Michael J.~Downes. The comments are his. I
% have added some formatting options to the arguments so that a user
% can emulate the \pkg{isotope} package.
+%
+% \changes{v.1.12}{2012/04/19}{Extended \cs{prescript} to change style
+% if used in say S context. Requestd by Oliver Buerschaper.}
+% Update 2012: One drawback from MJD's original implementation, is
+% that the math style is hardwired, such that if used in say
+% \cs{scriptstyle} context, then the style/size of the prescript
+% remain the same size. A slightly expensive fix, is to use the
+% \cs{mathchoice} construction. First exdent MJD's code a little
+% (keeping his comments)
+% \begin{macro}{\MT_prescript_inner:}
+% We make the style an extra forth argument
% \begin{macrocode}
-\DeclareRobustCommand{\prescript}[3]{
+\newcommand{\MT_prescript_inner:}[4]{
% \end{macrocode}
% Put the sup in box 0 and the sub in box 2.
% \begin{macrocode}
- \@mathmeasure\z@\scriptstyle{\MT_prescript_sup:{#1}}
- \@mathmeasure\tw@\scriptstyle{\MT_prescript_sub:{#2}}
+ \@mathmeasure\z@#4{\MT_prescript_sup:{#1}}
+ \@mathmeasure\tw@#4{\MT_prescript_sub:{#2}}
\if_dim:w \wd\tw@>\wd\z@
\setbox\z@\hbox to\wd\tw@{\hfil\unhbox\z@}
\else:
@@ -4472,6 +4916,24 @@ and the derived files
\MT_prescript_arg:{#3}
}
% \end{macrocode}
+% \end{macro}
+% Next create \cs{prescript} using \cs{mathchoice}
+% \begin{macrocode}
+\DeclareRobustCommand{\prescript}[3]{
+ \mathchoice
+% \end{macrocode}
+% In D and T style, we use MJD's default:
+% \begin{macrocode}
+ {\MT_prescript_inner:{#1}{#2}{#3}{\scriptstyle}}
+ {\MT_prescript_inner:{#1}{#2}{#3}{\scriptstyle}}
+% \end{macrocode}
+% In the others we step one style down. Of couse in SS style, using
+% \cs{scriptscript} may seem wrong, but there is no lower style.
+% \begin{macrocode}
+ {\MT_prescript_inner:{#1}{#2}{#3}{\scriptscriptstyle}}
+ {\MT_prescript_inner:{#1}{#2}{#3}{\scriptscriptstyle}}
+}
+% \end{macrocode}
% \end{macro}
% Then the named arguments. Can you see I'm preparing for templates?
% \begin{macrocode}
diff --git a/Master/texmf-dist/source/latex/mh/mhsetup.dtx b/Master/texmf-dist/source/latex/mh/mhsetup.dtx
index d4b71b9a76d..d1fe0bcb154 100644
--- a/Master/texmf-dist/source/latex/mh/mhsetup.dtx
+++ b/Master/texmf-dist/source/latex/mh/mhsetup.dtx
@@ -1,6 +1,6 @@
% \iffalse meta-comment
%
-% Copyright (C) 2002-2007,2010 by Morten Hoegholm <mh.ctan@gmail.com>
+% Copyright (C) 2002-2007,2010 by Morten Hoegholm
%
% This work may be distributed and/or modified under the
% conditions of the LaTeX Project Public License, either
@@ -12,7 +12,7 @@
%
% This work has the LPPL maintenance status "maintained".
%
-% This Current Maintainer of this work is Morten Hoegholm,
+% This Current Maintainer of this work is
% Lars Madsen, Will Robertson and Joseph Wright.
%
% This work consists of the main source file mhsetup.dtx
@@ -77,7 +77,7 @@
This is a generated file.
-Copyright (C) 2002-2007,2010 by Morten Hoegholm <mh.ctan@gmail.com>
+Copyright (C) 2002-2007,2010 by Morten Hoegholm
This work may be distributed and/or modified under the
conditions of the LaTeX Project Public License, either
@@ -89,7 +89,7 @@ LaTeX version 2005/12/01 or later.
This work has the LPPL maintenance status "maintained".
-This Current Maintainer of this work is Morten Hoegholm,
+This Current Maintainer of this work is
Lars Madsen, Will Robertson and Joseph Wright.
This work consists of the main source file mhsetup.dtx
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 01:20:23 +0000