summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/source/latex/graphics
diff options
context:
space:
mode:
Diffstat (limited to 'Master/texmf-dist/source/latex/graphics')
-rw-r--r--Master/texmf-dist/source/latex/graphics/color.dtx890
-rw-r--r--Master/texmf-dist/source/latex/graphics/drivers.dtx1662
-rw-r--r--Master/texmf-dist/source/latex/graphics/epsfig.dtx141
-rw-r--r--Master/texmf-dist/source/latex/graphics/graphics.dtx1782
-rw-r--r--Master/texmf-dist/source/latex/graphics/graphics.ins116
-rw-r--r--Master/texmf-dist/source/latex/graphics/graphicx.dtx863
-rw-r--r--Master/texmf-dist/source/latex/graphics/keyval.dtx401
-rw-r--r--Master/texmf-dist/source/latex/graphics/lscape.dtx134
-rw-r--r--Master/texmf-dist/source/latex/graphics/pstcol.dtx159
-rw-r--r--Master/texmf-dist/source/latex/graphics/trig.dtx308
10 files changed, 6456 insertions, 0 deletions
diff --git a/Master/texmf-dist/source/latex/graphics/color.dtx b/Master/texmf-dist/source/latex/graphics/color.dtx
new file mode 100644
index 00000000000..5a31f82a9d6
--- /dev/null
+++ b/Master/texmf-dist/source/latex/graphics/color.dtx
@@ -0,0 +1,890 @@
+%
+% \iffalse
+%
+%% color.dtx Copyright (C) 1994--1999 David Carlisle
+%%
+%% This file is part of the Standard LaTeX `Graphics Bundle'.
+%% It may be distributed under the terms of the LaTeX Project Public
+%% License, as described in lppl.txt in the base LaTeX distribution.
+%% Either version 1.0 or, at your option, any later version.
+%%
+%<*dtx>
+ \ProvidesFile{color.dtx}
+%</dtx>
+%<package>\NeedsTeXFormat{LaTeX2e}[1995/12/01]
+%<package>\ProvidesPackage{color}
+%<driver> \ProvidesFile{color.drv}
+% \fi
+% \ProvidesFile{color.dtx}
+ [1999/02/16 v1.0i Standard LaTeX Color (DPC)]
+%
+% \iffalse
+%<*driver>
+\documentclass{ltxdoc}
+\newenvironment{option}[1]{\expandafter\macro\expandafter{%
+ \csname ds@#1\endcsname}}{\endmacro}
+\begin{document}
+ \DocInput{color.dtx}
+\end{document}
+%</driver>
+% \fi
+%
+% \GetFileInfo{color.dtx}
+%
+% \title{The \textsf{color} package\thanks{This file
+% has version number \fileversion, last
+% revised \filedate.}}
+% \author{D. P. Carlisle}
+% \date{\filedate}
+% \maketitle
+%
+% \CheckSum{426}
+%
+%
+% \title{The implementation of the \LaTeX\ Colour interface.}
+%
+% \section{Introduction}
+% This package implements \LaTeX\ support for colour, for those
+% \texttt{dvi} drivers that can produce coloured text.
+%
+% The user level documentation of this package is contained in the
+% document \emph{Packages in the `graphics' bundle} in the file
+% \texttt{grfguide.tex}.
+%
+% \StopEventually{}
+%
+%
+% \section{Options}
+%
+% \changes{v0.2a}{1994/04/13}
+% {TEMP KLUDGE for Feb 94 release of 2e:
+% Add extra groups}
+% \changes{v0.2d}{1994/05/13}
+% {All support for Feb 1994 release removed (so used optional arg
+% of \cs{NeedsTeXFormat}).}
+% \changes{v1.0}{1996/05/29}
+% {Version 1 at last}
+%
+% \begin{macrocode}
+%<*package>
+% \end{macrocode}
+%
+% First we save the catcodes of some characters, and set them to
+% fixed values whilst this file is being read.
+% \changes{v0.3b}{1994/09/14}
+% {Save and restore catcodes}
+% \begin{macrocode}
+\edef\Gin@codes{%
+ \catcode`\noexpand\^^A\the\catcode`\^^A\relax
+ \catcode`\noexpand\"\the\catcode`\"\relax
+ \catcode`\noexpand\*\the\catcode`\*\relax
+ \catcode`\noexpand\!\the\catcode`\!\relax
+ \catcode`\noexpand\:\the\catcode`\:\relax}
+\catcode`\^^A=\catcode`\%
+\catcode`\"=12
+\catcode`\*=11
+\catcode`\!=12
+\catcode`\:=12
+% \end{macrocode}
+%
+% \begin{macro}{\Gin@driver}
+% Initalise the macro to hold the driver file name.
+% \begin{macrocode}
+\providecommand\Gin@driver{}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\c@lor@error}
+% \changes{v1.0d}{1997/01/07}
+% {Macro added for graphics/2350}
+% Helper macro for error handling (redefined by the monochrome option
+% to make errors warnings).
+% \begin{macrocode}
+\def\c@lor@error#1{%
+ \@latex@error{Undefined color #1}\@ehd}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{option}{monochrome}
+% The |monochrome| option should be used \emph{in addition}
+% to one of the standard driver options.
+% \changes{v0.3j}{1995/06/16}
+% {Use single hash for latex/1557}
+% \changes{v1.0b}{1996/10/29}
+% {Add \cs{colors@false}}
+% \changes{v1.0d}{1997/01/07}
+% {Add \cs{c@lor@error} for graphics/2350}
+% \begin{macrocode}
+\DeclareOption{monochrome}{%
+ \def\c@lor@error#1{\PackageInfo{color}{Undefined color #1}}%
+ \AtEndOfPackage{%
+ \colors@false
+ \def\set@color{%
+ \c@lor@special\m@ne
+ {color push \current@color}\aftergroup\reset@color}%
+ \def\reset@color{\c@lor@special\m@ne{color pop}}%
+ \def\set@page@color{%
+ \c@lor@special\m@ne{background \current@color}}%
+ \def\define@color#1#2{%
+ \c@lor@special\m@ne{define #1 #2}}}}
+% \end{macrocode}
+% \end{option}
+%
+% \begin{option}{debugshow}
+% The |debugshow| option turns on debugging info (perhaps).
+% \changes{v1.0a}{1996/09/16}
+% {debugshow option added}
+% \begin{macrocode}
+\DeclareOption{debugshow}{\catcode`\^^A=9 \let\GDebug\typeout}
+% \end{macrocode}
+% \end{option}
+%
+% Now the options for supported drivers.
+%
+% \begin{option}{dvips}
+% \begin{option}{xdvi}
+% Tom Rokicki's dvips driver, and the X Windows previer, xdvi which uses
+% (a subset of) the same |\specials|.
+% \begin{macrocode}
+\DeclareOption{dvips}{\def\Gin@driver{dvips.def}%
+ \def\c@lor@namefile{dvipsnam.def}}
+\DeclareOption{xdvi}{\ExecuteOptions{dvips,monochrome}}
+% \end{macrocode}
+% \end{option}
+% \end{option}
+%
+% \begin{option}{dvipdf}
+% \changes{v1.0c}{1996/10/31}
+% {dvipdf added}
+% Sergey Lesenko's dvipdf driver.
+% \begin{macrocode}
+\DeclareOption{dvipdf}{\def\Gin@driver{dvipdf.def}}
+% \end{macrocode}
+% \end{option}
+%
+% \begin{option}{dvipdfm}
+% \changes{v1.0h}{1999/01/13}
+% {dvipdfm added}
+% Mark Wick's dvipdfm driver.
+% \begin{macrocode}
+\DeclareOption{dvipdfm}{\def\Gin@driver{dvipdfm.def}}
+% \end{macrocode}
+% \end{option}
+%
+% \begin{option}{pdftex}
+% \changes{v1.0e}{1997/06/07}
+% {pdftex added}
+% Han The Thanh's \TeX\ variant.
+% \begin{macrocode}
+\DeclareOption{pdftex}{\def\Gin@driver{pdftex.def}}
+% \end{macrocode}
+% \end{option}
+%
+% \begin{option}{dvipsone}
+% \begin{option}{dviwindo}
+% \changes{v0.3k}{1995/09/07}
+% {Merge dviwindo and dvipsone options}
+% The drivers of the Y\&Y \TeX\ system.
+% (Which use the same |\specials|).
+% \begin{macrocode}
+\DeclareOption{dvipsone}{\def\Gin@driver{dvipsone.def}}
+\DeclareOption{dviwindo}{\ExecuteOptions{dvipsone}}
+% \end{macrocode}
+% \end{option}
+% \end{option}
+%
+% \begin{option}{emtex}
+% \begin{option}{dviwin}
+% Freely available drivers for PCs.
+% \begin{macrocode}
+\DeclareOption{emtex}{\def\Gin@driver{emtex.def}}
+\DeclareOption{dviwin}{\def\Gin@driver{dviwin.def}}
+% \end{macrocode}
+% \end{option}
+% \end{option}
+%
+% \begin{option}{oztex}
+% \changes{v1.0f}{1997/09/09}
+% {Merge dvips and oztex options}
+% The Oz\TeX\ system for a Macintosh.
+% Since release 3 of Oz\TeX, merge with dvips back end.
+% \begin{macrocode}
+\DeclareOption{oztex}{\ExecuteOptions{dvips}}
+% \end{macrocode}
+% \end{option}
+%
+% \begin{option}{textures}
+% Blue sky's Textures system on a Macintosh.
+% \begin{macrocode}
+\DeclareOption{textures}{\def\Gin@driver{textures.def}}
+% \end{macrocode}
+% \end{option}
+%
+% \begin{option}{pctexps}
+% \begin{option}{pctexwin}
+% \begin{option}{pctexhp}
+% \begin{option}{pctex32}
+% \changes{v1.0b}{1996/10/29}
+% {pctex32 option added}
+% The drivers for PTI's \TeX\ system on PCs.
+% \begin{macrocode}
+\DeclareOption{pctexps}{\def\Gin@driver{pctexps.def}}
+\DeclareOption{pctexwin}{\def\Gin@driver{pctexwin.def}}
+\DeclareOption{pctexhp}{\def\Gin@driver{pctexhp.def}}
+\DeclareOption{pctex32}{\def\Gin@driver{pctex32.def}}
+% \end{macrocode}
+% \end{option}
+% \end{option}
+% \end{option}
+% \end{option}
+%
+% \begin{option}{truetex}
+% \begin{option}{tcidvi}
+% \changes{v1.0b}{1996/10/29}
+% {truetex and tcidvi options added}
+% The drivers of the Kinch \TeX\ system on PCs, and its
+% version with extra |\special| handling dll's as shipped with
+% TCI's Scientific Word.
+% \begin{macrocode}
+\DeclareOption{truetex}{\def\Gin@driver{truetex.def}}
+\DeclareOption{tcidvi}{\def\Gin@driver{tcidvi.def}}
+% \end{macrocode}
+% \end{option}
+% \end{option}
+%
+% \begin{option}{vtex}
+% \changes{v1.0g}{1998/05/27}
+% {vtex option added}
+% V\TeX\ driver.
+% \begin{macrocode}
+\DeclareOption{vtex}{\def\Gin@driver{vtex.def}}
+% \end{macrocode}
+% \end{option}
+%
+% \begin{option}{dvi2ps}
+% \begin{option}{dvialw}
+% \begin{option}{dvilaser}
+% \begin{option}{dvitops}
+% \begin{option}{psprint}
+% \begin{option}{pubps}
+% \begin{option}{ln}
+% \changes{v1.0b}{1996/10/29}
+% {old driver options depreciated}
+% Old, probably obsolete, drivers commented out. See the section
+% on `Driver support' in grfguide to see how to re-enable these
+% options in |color.cfg| if you need them.
+% \begin{macrocode}
+%\DeclareOption{dvi2ps}{\def\Gin@driver{dvi2ps.def}}
+%\DeclareOption{dvialw}{\def\Gin@driver{dvialw.def}}
+%\DeclareOption{dvilaser}{\def\Gin@driver{dvilaser.def}}
+%\DeclareOption{dvitops}{\def\Gin@driver{dvitops.def}}
+%\DeclareOption{psprint}{\def\Gin@driver{psprint.def}}
+%\DeclareOption{pubps}{\def\Gin@driver{pubps.def}}
+%\DeclareOption{ln}{\def\Gin@driver{ln.def}}
+% \end{macrocode}
+% \end{option}
+% \end{option}
+% \end{option}
+% \end{option}
+% \end{option}
+% \end{option}
+% \end{option}
+%
+%
+% \begin{option}{dvipsnames}
+% \begin{option}{nodvipsnames}
+% By default the named colour model has no pre-declared names.
+% The |dvipsnames| option predeclares all the names in the colour
+% prologue of dvips. The |dvips| option automatically implies
+% |dvipsnames| unless this choice is overruled with the |nodvipsnames|
+% option. For other drivers, eg |textures| you may use this option to
+% explicitly request that these names be declared.
+% \begin{macrocode}
+\DeclareOption{dvipsnames}{\def\c@lor@namefile{dvipsnam.def}}
+\DeclareOption{nodvipsnames}{\let\c@lor@namefile\relax}
+% \end{macrocode}
+% \end{option}
+% \end{option}
+%
+% \begin{option}{usenames}
+% The |usenames| option modifies the behaviour of |\DefineNamedColor|
+% So that it declares the same name as a ```user's colour'' for use in
+% a |\color| command, as well as a name in the |named| colour model.
+% The normal behaviour is just to decalare the name in the named colour
+% model.
+% \begin{macrocode}
+\let\c@lor@usename\@gobble
+% \end{macrocode}
+%
+% \begin{macrocode}
+\DeclareOption{usenames}{%
+ \def\c@lor@usename#1{%
+ \expandafter\color@named\csname\string\color @#1\endcsname{#1}}}
+% \end{macrocode}
+% \end{option}
+%
+% \section{Using Colours}
+%
+% \subsection{Declarative form}
+%
+% \begin{macro}{\color}
+% |\color{|\emph{declared-colour}|}| switches to the colour
+% \emph{declared-colour}, which must previously have been defined
+% using |\definecolor|. This colour will stay in effect until the end of
+% the current \TeX\ group.
+%
+% |\color[|\emph{model}|]{|\emph{colour-specification}|}| is similar
+% to the above, but uses a colour not declared by |\definecolor|. The
+% allowed \emph{model}'s vary depending on the driver. The syntax of
+% the \emph{colour-specification} argument depends on the model.
+%
+% \changes{v0.3a}{1994/07/20}
+% {Make \cs{color} robust}
+% \begin{macrocode}
+\DeclareRobustCommand\color{%
+ \@ifnextchar[\@undeclaredcolor\@declaredcolor}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\@undeclaredcolor}
+% \changes{v0.2c}{1994/05/09}
+% {Improve error messages}
+% \changes{v0.3a}{1994/07/20}
+% {New internal implementation of colour commands}
+% Call the driver-dependent command |\color@|\meta{model} to define
+% |\current@color|, then call |\set@color| to change the current colour
+% accordingly.
+% \begin{macrocode}
+\def\@undeclaredcolor[#1]#2{%
+ \@ifundefined{color@#1}%
+ {\c@lor@error{model `#1'}}%
+ {\csname color@#1\endcsname\current@color{#2}%
+ \set@color}%
+ \ignorespaces}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\@declaredcolor}%
+% \changes{v0.1c}{1994/04/01}
+% {Add \cs{ignorespaces}}
+% \changes{v0.1e}{1994/05/14}
+% {Minor change to error message}
+% \changes{v0.3a}{1994/07/20}
+% {New internal implementation of colour commands}
+% |\let| |\current@color| to the internal representation of the colour
+% if the colour has been declared, otherwise generate an error.
+% Finally call |\set@color| to effect the colour change.
+% \begin{macrocode}
+\def\@declaredcolor#1{%
+ \@ifundefined{\string\color @#1}%
+ {\c@lor@error{`#1'}}%
+ {\expandafter\let\expandafter\current@color
+ \csname\string\color @#1\endcsname
+ \set@color}%
+ \ignorespaces}
+% \end{macrocode}
+% \end{macro}
+%
+% \subsection{Command (Argument) Form}
+%
+% \begin{macro}{\textcolor}
+% |\textcolor{|\emph{declared-colour}|}{|\emph{text}|}| and
+% |\textcolor[|\emph{model}|]{|\emph{colour-spec}|}{|\emph{text}|}|
+% are just alternative syntax for |\color|, in
+% which the groups are added implicitly. Thus \emph{text} appears in the
+% specified colour, but then the colour reverts to its previous value.
+% The naming is by analogy with |\textrm| (as opposed to |\rm| and
+% |\rmfamily|) although it is slightly a misnomer as the command also
+% works in math-mode.
+%
+% Since December 95, in fact this command has one other difference
+% from |\color|. It calls |\leavevmode| to ensure the start of
+% horizontal mode. Specifically this means that a construction
+% such as
+%\begin{verbatim}
+% xxx\parbox[t]{1cm}{\textcolor{red}{a}.....
+%\end{verbatim}
+% now works as expected, with the |xxx| and the red |a| lining up
+% correctly.
+% \changes{v0.3a}{1994/07/20}
+% {Stop command being \cs{long}, and make robust.}
+% \changes{v0.3l}{1995/12/07}
+% {Add \cs{leavevmode}}
+% \begin{macrocode}
+\def\textcolor#1#{\@textcolor{#1}}
+\def\@textcolor#1#2#3{\protect\leavevmode{\color#1{#2}#3}}
+% \end{macrocode}
+% \end{macro}
+%
+% \subsection{Background (Page) Colour}
+%
+% \begin{macro}{\pagecolor}
+% |\pagecolor|, which has the same argument forms as |\color|, specifies
+% the background colour for the current, and all following, pages. It is
+% a global declaration which does not respect \TeX\ groups.
+%
+% \changes{v0.1c}{1994/04/01}
+% {end the group even if the colour command generates an error}
+% \changes{v0.3c}{1994/09/19}
+% {Use \cs{color} to parse arguments}
+% \begin{macrocode}
+\def\pagecolor{%
+ \begingroup
+ \let\ignorespaces\endgroup
+ \let\set@color\set@page@color
+ \color}
+% \end{macrocode}
+% \end{macro}
+%
+% \section{Defining Colours}
+%
+% \begin{macro}{\definecolor}
+% |\definecolor{|\emph{name}|}{|\emph{model}|}{|\emph{colour-spec}|}|
+% defines the color \emph{name}, which may then be used in subsequent
+% |\color| or |\textcolor| commands to refer to a colour specified by
+% \emph{colour-spec} in the colour model \emph{model}.
+%
+% |\definecolor| associates the \emph{name} the to a colour in
+% \emph{model}. So |\color{|\emph{name}|}| would check \emph{name}
+% then issue a |\special| for the colour model \emph{model}.
+%
+% |\definecolor| just calls an internal macro that defines the colour
+% for a particular model. This macro must have been defined by the
+% driver file that supports the requested \emph{model}.
+%
+% \changes{v0.1b}{1994/03/15}
+% {change name from \cs{newcolor} to \cs{definecolor}}
+% \changes{v0.1e}{1994/05/14}
+% {Minor change to error message}
+% \changes{v0.3a}{1994/07/20}
+% {New internal implementation of colour commands}
+% \changes{v0.3f}{1994/10/04}
+% {Give info about redefinitions}
+% \begin{macrocode}
+\def\definecolor#1#2#3{%
+ \@ifundefined{color@#2}%
+ {\c@lor@error{model `#2'}}%
+ {\@ifundefined{\string\color @#1}{}%
+ {\PackageInfo{color}{Redefining color #1}}%
+ \csname color@#2\expandafter\endcsname
+ \csname\string\color @#1\endcsname{#3}}}
+% \end{macrocode}
+% \end{macro}
+%
+%
+% \begin{macro}{\DefineNamedColor}
+% \changes{v0.3d}{1994/09/29}
+% {Macro added}
+% \changes{v0.3e}{1994/10/03}
+% {usenames option added}
+% \changes{v0.3f}{1994/10/04}
+% {Give info about redefinitions}
+%
+% Driver files may opt to define a `named' colour model.
+% Placing colour names rather than numeric specifications into the dvi
+% file has certain advantages, in that post processing software can
+% tune the colour specifications to the particular technology being
+% used, and more easily make colour separations for that colour.
+% The disadvantage is that the driver must `know' the colour
+% names.
+%
+% The `color1' drivers (dvips) currently ignore the specification of
+% the colour, and once a name is defined, just put the colour name in
+% the dvi file. For dvips, The header file \texttt{color.pro} is used to
+% give the cmyk equivalents of the names.
+%
+% The `color2' drivers (textures) use a special postscript operator
+% that takes both the name and the cmyk equivalent. so if the names are
+% no being used, fall back' definitions in the cmyk model are available.
+% These drivers also allow a numeric value to affect the `density'
+% of the colour to use.
+%
+% Drivers based on `color3' do not support named colours at the dvi
+% level, but to ease document portability, the named model is still
+% defined, but the |\special|'s just put the colour specifications, not
+% the names, into the dvi file.
+%
+% Normally after a colour, say |JungleGreen|, has been declared with:\\
+% |\DefineNamedColor{named}{JungleGreen}{cmyk}{1,2,3,4}|\\
+% it is available in the `named' colour model, for
+% instance by\\
+% |\color[named]{JungleGreen}|\\
+% A user may give a more convenient name, using\\
+% |\definecolor{mygreen}{named}{JungleGreen}|\\
+% If however you are happy with the original names, and want to use
+% them directly, as in |\color{JungleGreen}| without specifying
+% |[named]| all the time, just give the package option |usenames|, which
+% will redefine |\DefineNamedColor|, so that the colour name is declared
+% as a user-colour as well as a name in the `named' model.
+% \begin{macrocode}
+\def\DefineNamedColor#1#2#3#4{%
+ \@ifundefined{define@color@#1}%
+ {\c@lor@error{model `#1'}}%
+ {\@ifundefined{color@#3}%
+ {\c@lor@error{model `#3'}}%
+ {\@ifundefined{c@lor@#1@#2}{}%
+ {\PackageInfo{color}{Redefining color #2 in named color model}}%
+ \csname color@#3\endcsname\@tempa{#4}%
+ \csname define@color@#1\endcsname{#2}\@tempa
+ \c@lor@usename{#2}}}}
+\@onlypreamble\DefineNamedColor
+% \end{macrocode}
+% \end{macro}
+%
+% \section{Colour Switch}
+%
+% \begin{macro}{\ifcolors@}
+% This boolean can be tested by higher level macros that may want to
+% alter their behaviour if a monochrome driver is being used.
+% \begin{macrocode}
+\newif\ifcolors@
+\colors@true
+% \end{macrocode}
+% \end{macro}
+%
+% \section{Whatsit\ldots}
+%
+% \begin{macro}{\c@lor@special}
+% Some drivers can not support all the features of this package. They
+% should always put a \meta{whatsit} in the current list though. the
+% following macro has most of the features of |\special|, but does not
+% put anything into the |dvi| file. It does write to the log file or the
+% terminal (depending on the value of |#1|).
+% \begin{macrocode}
+\def\c@lor@special#1#2{%
+ \edef\@tempa{\write#1{#2}}\@tempa}
+% \end{macrocode}
+% \end{macro}
+%
+% \section{Processing Options}
+%
+% A local configuration file may declare more options.
+% It should also make one driver option the default, by calling
+% |\ExecuteOptions| with the appropriate option.
+% \begin{macrocode}
+\InputIfFileExists{color.cfg}{}{}
+% \end{macrocode}
+%
+% After the options are processed, load the appropriate driver file.
+% If a site wants a default driver (eg |dvips|) it just needs to put
+% |\ExecuteOptions{dvips}| in a |color.cfg| file.
+% \changes{v0.3b}{1994/09/14}
+% {New style of loading driver files}
+% \begin{macrocode}
+\ProcessOptions
+% \end{macrocode}
+%
+% \begin{macrocode}
+\if!\Gin@driver!
+ \PackageError{color}
+ {No driver specified}
+ {You should make a default driver option in a file \MessageBreak
+ color.cfg\MessageBreak
+ eg: \protect\ExecuteOptions{dvips}%
+ }
+\else
+ \PackageInfo{color}{Driver file: \Gin@driver}
+ \@ifundefined{ver@\Gin@driver}{\input{\Gin@driver}}{}
+\fi
+% \end{macrocode}
+%
+% \begin{macrocode}
+\@ifundefined{c@lor@namefile}{}{\input{\c@lor@namefile}}
+% \end{macrocode}
+%
+% \section{Default Colour}
+%
+% \begin{macro}{\normalcolor}
+% Early versions of this package redefined |\reset@font| to reset the
+% color as well. Current versions do not do this (there are too many
+% |\reset@font| commands hidden in strange places) and so defines a
+% separate command, |\normalcolor| to reset the colour to the colour in
+% effect at the start of the document.
+%
+% |\normalcolor| is defined (to |\relax|) in the \LaTeX\ kernel, so it
+% is safe to use this in macros that may possibly be used in
+% conjunction with colour. It will have no effect until the |color|
+% package is also loaded.
+% \changes{v0.2b}{1994/04/18}
+% {Only reset the colour with \cmd{\reset@font} not
+% \cmd{\normalfont}}
+% \changes{v0.2d}{1994/05/13}
+% {Stop changing \cs{reset@font}. Use the new \cs{normalfont}
+% instead.}
+% \begin{macrocode}
+\def\normalcolor{\let\current@color\default@color\set@color}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\default@color}
+% Internal macro to store the `default' colour used by |\normalcolor|.
+% \begin{macrocode}
+\AtBeginDocument{\let\default@color\current@color}
+% \end{macrocode}
+% \end{macro}
+%
+% |\current@color| contains an internal representation of the colour
+% at this point in the document. (This can only be an approximation to
+% the truth as the `macro layer' of \TeX\ does not know where the output
+% routine is going to re-insert floats. This is why drivers must
+% maintain their own stack of colours in order to fully support these
+% commands.
+%
+% For dvips, the |\current@color| it is something like `|Black|' or
+% `|rgb 0 1 0|', but other packages should not rely on any particular
+% format for this macro.
+%
+% The driver file \emph{must} initialise |\current@color| to a
+% specification for Black. This initialisation can not occur here, as
+% the possible colour models (and thus the syntax for `black')
+% are not known at this point.
+%
+% \section{Higher Level Commands}
+%
+% With the basic colour primitives specified above we may define a few
+% higer level commands for coloured boxes etc. This is still quite a low
+% level and presumably packages and classes making use of colour will
+% define more appropriate document-level commands.
+%
+% \subsection{Colour Block}
+%
+% \begin{macro}{\color@block}
+% |\color@block{|\emph{width}|}{|\emph{height}|}{|\emph{depth}|}|\\
+% Should take up no space for \TeX, but produce a block in the current
+% colour of the specified size. It is mainly used for producing box
+% backgrounds.
+%
+% The definition here works by selecting a colour, and then drawing a
+% \TeX\ rule (unless |\ifcolors@false|). This allows the `driver
+% independent' colour specials to be used. However it is defined using
+% |\providecommand|, so that this file will not over-write any other
+% definition of this command. A graphics package may want to define it
+% using a special to produce (for example) a PostScript line. Producing
+% the line in the |\special| has the advantage that on a preview that
+% does not understand |\special|s, the line is automatically omited,
+% without needing to modify the source of the document (for instance by
+% adding the |monochrome| option).
+%
+% \begin{macrocode}
+\def\color@block#1#2#3{%
+ {\set@color\rlap{\ifcolors@\vrule\@width#1\@height#2\@depth#3\fi}}}
+% \end{macrocode}
+% \end{macro}
+%
+% \subsection{Coloured Boxes}
+%
+% \begin{macro}{\colorbox}
+% |\colorbox| takes the same argument forms as |\textcolor|, but the
+% colour specifies the \emph{background} colour of the box.
+% \changes{v0.3b}{1994/09/14}
+% {New implementation}
+% \begin{macrocode}
+\def\colorbox#1#{\color@box{#1}}
+% \end{macrocode}
+% \end{macro}
+%
+% \changes{v0.3i}{1995/04/27}
+% {Move \cs{leavevmode} for graphics/1521}
+% \begin{macro}{\color@box}
+% \begin{macrocode}
+\def\color@box#1#2{\color@b@x\relax{\color#1{#2}}}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\fcolorbox}
+% |\fcolorbox| has an extra \emph{colour-spec} argument, and puts a
+% frame of the first colour around a box with a background specified by
+% the second colour. If an optional argument is given, it specifies the
+% colour model for both colours.
+% \changes{v0.3b}{1994/09/14}
+% {New implementation}
+% \begin{macro}{\fcolorbox}
+% \begin{macrocode}
+\def\fcolorbox#1#{\color@fbox{#1}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+\def\color@fbox#1#2#3{%
+ \color@b@x{\fboxsep\z@\color#1{#2}\fbox}{\color#1{#3}}}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+
+% \begin{macro}{\color@b@x}
+% Internal macro for |\colorbox| and |\fcolorbox|.
+% \changes{v0.3b}{1994/09/14}
+% {Macro added.}
+% \changes{v0.3i}{1995/04/27}
+% {Add \cs{leavevmode} for graphics/1521}
+% \begin{macrocode}
+\long\def\color@b@x#1#2#3{%
+ \leavevmode
+ \setbox\z@\hbox{\kern\fboxsep{\set@color#3}\kern\fboxsep}%
+ \dimen@\ht\z@\advance\dimen@\fboxsep\ht\z@\dimen@
+ \dimen@\dp\z@\advance\dimen@\fboxsep\dp\z@\dimen@
+ {#1{#2\color@block{\wd\z@}{\ht\z@}{\dp\z@}%
+ \box\z@}}}
+% \end{macrocode}
+% \end{macro}
+%
+%
+% \section{Extra Groups}
+% Turning on extra groups in the standard \LaTeX\ commands, so that
+% colour commands are scoped corectly.
+%
+% Like |\normalcolor|, the following five commands are defined in the
+% kernel, with empty definitions (|\relax|). This means that they can
+% be used to make macros in packages `colour safe'. The commands
+% will not have any effect unless a user also uses this colour
+% package, when the `active definitions' here will take effect and
+% keep colour commands correctly scoped.
+%
+% \begin{macro}{\color@setgroup}
+% This is to be used in contexts (eg `lrbox') where text is to be
+% saved and used after some other, unknown, text that may contain
+% colour commands. A matching |\color@endgroup| should be used at the
+% end of the text.
+% \changes{v0.2d}{1994/05/13}
+% {Macro added}
+% \begin{macrocode}
+\def\color@setgroup{\begingroup\set@color}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\color@begingroup}
+% This is to be used at the start of contexts that may contain colour
+% commands, but where it is not necessary to save the current colour.
+% Examples of this are in the box commands of |ltboxes.dtx| where
+% user-supplied text is saved internally in a box between
+% |\color@begingroup|, |\color@endgroup|, but the box is used before
+% any other colour commands could intervene. A matching
+% |\color@endgroup| should be used at the end of the text.
+% \changes{v0.2d}{1994/05/13}
+% {New definition, was previously like \cs{color@setgroup}}
+% \begin{macrocode}
+\let\color@begingroup\begingroup
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\color@endgroup}
+% To be used to close the `group' started by one of the above two
+% commands. The |\endgraf| in its definition is required in the case
+% of groups of text in vertical `par' mode, but doesn't do any harm in
+% horizontal `LR' contexts.
+% \changes{v0.2d}{1994/05/13}
+% {New definition, was previously just \cs{endroup}}
+% \begin{macrocode}
+\def\color@endgroup{\endgraf\endgroup}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\color@hbox}
+% To be used to open a `coloured hbox'
+% \changes{v0.3g}{1994/11/08}
+% {Macro added}
+% \begin{macrocode}
+\def\color@hbox{\hbox\bgroup\color@begingroup}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\color@vbox}
+% To be used to open a `coloured hbox'
+% \changes{v0.3h}{1994/11/22}
+% {Macro added}
+% \begin{macrocode}
+\def\color@vbox{\vbox\bgroup\color@begingroup}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\color@endbox}
+% To be used to close a `coloured hbox'
+% \changes{v0.3g}{1994/11/08}
+% {Macro added}
+% \begin{macrocode}
+\def\color@endbox{\color@endgroup\egroup}
+% \end{macrocode}
+% \end{macro}
+%
+%
+% \changes{v0.2d}{1994/05/13}
+% {tabbing support removed (now in kernel)}
+%
+% \changes{v0.3l}{1995/12/07}
+% {\cs{underbar} removed (now in kernel)}
+%
+% \changes{v0.3h}{1994/11/22}
+% {marginpar, phantom and smash now supported in kernel}
+%
+% \changes{v0.3l}{1995/12/07}
+% {\cs{showhyphens} removed (now in kernel)}
+%
+%
+% \section{Predefining Colours}
+%
+% As long as the driver file has defined sufficient colour models, we
+% define a few colours, just to get people started.
+%
+% \begin{macro}{black}
+% \begin{macro}{white}
+% Black and white `colours'.
+% \begin{macrocode}
+\ifx\color@gray\@undefined
+ \ifx\color@rgb\@undefined
+ \else
+ \definecolor{black}{rgb}{0,0,0}
+ \definecolor{white}{rgb}{1,1,1}
+ \fi
+\else
+ \definecolor{black}{gray}{0}
+ \definecolor{white}{gray}{1}
+\fi
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{red}
+% \begin{macro}{green}
+% \begin{macro}{blue}
+% Additive primaries.
+% \begin{macrocode}
+\ifx\color@rgb\@undefined\else
+ \definecolor{red}{rgb}{1,0,0}
+ \definecolor{green}{rgb}{0,1,0}
+ \definecolor{blue}{rgb}{0,0,1}
+\fi
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{cyan}
+% \begin{macro}{magenta}
+% \begin{macro}{yellow}
+% Subtractive primaries.
+% \begin{macrocode}
+\ifx\color@cmyk\@undefined\else
+ \definecolor{cyan}{cmyk}{1,0,0,0}
+ \definecolor{magenta}{cmyk}{0,1,0,0}
+ \definecolor{yellow}{cmyk}{0,0,1,0}
+\fi
+% \end{macrocode}
+%
+% \begin{macrocode}
+%</package>
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+%
+% \section{And Finally}
+%
+% Restore Catcodes
+% \begin{macrocode}
+\Gin@codes
+\let\Gin@codes\relax
+% \end{macrocode}
+%
+% \Finale
+%
diff --git a/Master/texmf-dist/source/latex/graphics/drivers.dtx b/Master/texmf-dist/source/latex/graphics/drivers.dtx
new file mode 100644
index 00000000000..19f013d4ef6
--- /dev/null
+++ b/Master/texmf-dist/source/latex/graphics/drivers.dtx
@@ -0,0 +1,1662 @@
+%
+% \iffalse
+%
+%% drivers.dtx Copyright (C) 1994 David Carlisle Sebastian Rahtz
+%% Copyright (C) 1995 1996 1997 1998 1999 David Carlisle
+%%
+%% This file is part of the Standard LaTeX `Graphics Bundle'.
+%% It may be distributed under the terms of the LaTeX Project Public
+%% License, as described in lppl.txt in the base LaTeX distribution.
+%% Either version 1.0 or, at your option, any later version.
+%%
+%<template, >\ProvidesFile{template.def}
+%<dvips, >\ProvidesFile{dvips.def}
+%<dvipsnames>\ProvidesFile{dvipsnam.def}
+%<dvipdf, >\ProvidesFile{dvipdf.def}
+%<emtex, >\ProvidesFile{emtex.def}
+%<dviwin, >\ProvidesFile{dviwin.def}
+%<dvipsone, >\ProvidesFile{dvipsone.def}
+%<pctexps, >\ProvidesFile{pctexps.def}
+%<pctex32, >\ProvidesFile{pctex32.def}
+%<pctexwin, >\ProvidesFile{pctexwin.def}
+%<pctexhp, >\ProvidesFile{pctexhp.def}
+%<truetex, >\ProvidesFile{truetex.def}
+%<tcidvi, >\ProvidesFile{tcidvi.def}
+%<oztex, >\ProvidesFile{oztex.def}
+%<textures, >\ProvidesFile{textures.def}
+%<dvialw, >\ProvidesFile{dvialw.def}
+%<dvilaser, >\ProvidesFile{dvilaser.def}
+%<psprint, >\ProvidesFile{psprint.def}
+%<dvi2ps, >\ProvidesFile{dvi2ps.def}
+%<pubps, >\ProvidesFile{pubps.def}
+%<dvitops, >\ProvidesFile{dvitops.def}
+%<ln, >\ProvidesFile{ln.def}
+%
+%<*driver>
+ \NeedsTeXFormat{LaTeX2e}
+ \ProvidesFile{drivers.dtx}
+%</driver>
+ [1999/02/16 v3.0i Driver-dependant file (DPC,SPQR)]
+%
+%<*driver>
+ \documentclass{ltxdoc}
+ \GetFileInfo{drivers.dtx}
+ \begin{document}
+ \title{Graphics drivers for \LaTeXe\thanks
+ {Version \fileversion, revised \filedate}}
+ \author{Sebastian Rahtz and David Carlisle}
+ \date{\filedate}
+ \maketitle
+ \DocInput{drivers.dtx}
+ \end{document}
+%</driver>
+% \fi
+%
+% \CheckSum{1541}
+%
+%
+% \providecommand\OzTeX{O\kern-.03em z\kern-.15em\TeX}
+%
+% \section{Driver files}
+%
+% This file implements some of the currently supported drivers.
+% If the driver you use is not in this list then a `.def' file
+% may be distributed with This graphics bundle,
+% or may be distributed with your driver.
+%
+% If not, send us some details of the driver's |\special| syntax, and
+% we will try to produce a suitable file.
+%
+% Note that some of these files are for drivers to which we have no
+% access, so they are untested. Please send any corrections to the
+% latexbugs address.
+%
+%
+%
+%
+% \StopEventually{}
+%
+%
+% \section{Colour}
+%
+% Most of the drivers that support colour use one of three methods.
+% \begin{itemize}
+% \item color1: `dvips' style colour specials.
+% \item color2: `textures' style colour specials.
+% \item color3: Colour implemented via literal PostScript specials.
+% \item color4: Colour implemented by specials that only support RGB
+% ie Red Green Blue specified as integers in the range
+% 0--255. Other models converted to this within \TeX.
+% \end{itemize}
+% Some drivers do not use any of these modules and have their own code.
+% Note that drivers using the `color3' code can not fully support the
+% \LaTeX\ colour commands.
+% \begin{macrocode}
+%<*color1|color2|color3|color4>
+% \end{macrocode}
+%
+% \begin{macrocode}
+\def\c@lor@arg#1{%
+ \dimen@#1\p@
+ \ifdim\dimen@<\z@\dimen@\maxdimen\fi
+ \ifdim\dimen@>\p@
+ \PackageError{color}{Argument `#1' not in range [0,1]}\@ehd
+ \fi}
+% \end{macrocode}
+%
+% Need to make sure of a trailing .0 for textures. Apparently it
+% is OK to always add a . as 1.3. is accepted by textures.
+% textures gray special is reversed, so just use rgb instead.
+%
+% \begin{macrocode}
+\def\color@gray#1#2{%
+ \c@lor@arg{#2}%
+%<color4> \c@lor@rgb@RGB\@tempa
+%<color1> \edef#1{gray #2}%
+%<color2> \edef#1{rgb #2. #2. #2.}%
+%<color3> \edef#1{#2 setgray}%
+%<color4> \edef#1{\@tempa\@tempa\@tempa}%
+ }
+% \end{macrocode}
+%
+% \begin{macrocode}
+\def\color@cmyk#1#2{\c@lor@@cmyk#2\@@#1}
+\def\c@lor@@cmyk#1,#2,#3,#4\@@#5{%
+ \c@lor@arg{#4}%
+%<color4> \dimen@ii#4\p@
+ \c@lor@arg{#1}%
+%<color4> \c@lor@cmyk@RGB\@tempa
+ \c@lor@arg{#2}%
+%<color4> \c@lor@cmyk@RGB\@tempb
+ \c@lor@arg{#3}%
+%<color4> \c@lor@cmyk@RGB\@tempc
+%<color1> \edef#5{cmyk #1 #2 #3 #4}%
+%<color2> \edef#5{cmyk #1. #2. #3. #4.}%
+%<color3> \edef#5{#1 #2 #3 #4 setcmykcolor}%
+%<color4> \edef#5{\@tempa\@tempb\@tempc}%
+ }
+% \end{macrocode}
+%
+% A 0--1 range value will have been left in |\dimen@| by |\c@lor@arg|.
+% The black value (0--1) will be stored in |\dimen@ii|.
+% Covert to 0--255 integer, and leave in |#1|.
+% \begin{macrocode}
+%<*color4>
+\def\c@lor@cmyk@RGB#1{%
+ \advance\dimen@-\p@
+ \advance\dimen@\dimen@ii
+ \dimen@-\@cclv\dimen@
+ \divide\dimen@\p@
+ \count@\ifdim\dimen@<\z@\z@\else\dimen@\fi
+ \edef#1{\the\count@\space}}
+%</color4>
+% \end{macrocode}
+%
+% \begin{macrocode}
+\def\color@rgb#1#2{\c@lor@@rgb#2\@@#1}
+\def\c@lor@@rgb#1,#2,#3\@@#4{%
+ \c@lor@arg{#1}%
+%<color4> \c@lor@rgb@RGB\@tempa
+ \c@lor@arg{#2}%
+%<color4> \c@lor@rgb@RGB\@tempb
+ \c@lor@arg{#3}%
+%<color4> \c@lor@rgb@RGB\@tempc
+%<color1> \edef#4{rgb #1 #2 #3}%
+%<color2> \edef#4{rgb #1. #2. #3.}%
+%<color3> \edef#4{#1 #2 #3 setrgbcolor}%
+%<color4> \edef#4{\@tempa\@tempb\@tempc}%
+ }
+% \end{macrocode}
+%
+% A 0--1 range value will have been left in |\dimen@| by |\c@lor@arg|.
+% Convert to 0--255 integer, and leave in |#1|.
+% \begin{macrocode}
+%<*color4>
+\def\c@lor@rgb@RGB#1{%
+ \dimen@\@cclv\dimen@
+ \count@\dimen@
+ \divide\count@\p@
+ \edef#1{\the\count@\space}}
+%</color4>
+% \end{macrocode}
+%
+% \begin{macrocode}
+\def\color@RGB#1#2{\c@lor@@RGB#2\@@#1}
+% \end{macrocode}
+%
+% \begin{macrocode}
+\def\c@lor@@RGB#1,#2,#3\@@#4{%
+%<!color4> \c@lor@RGB@rgb{#1}\@tempa
+%<!color4> \c@lor@RGB@rgb{#2}\@tempb
+%<!color4> \c@lor@RGB@rgb{#3}\@tempc
+%<!color4> \c@lor@@rgb\@tempa,\@tempb,\@tempc\@@#4%
+%<color4> \edef#4{#1 #2 #3}%
+ }
+% \end{macrocode}
+% % Convert 0--255 integer, |#1|, to 0--1 real, and leave in |#2|.
+% \begin{macrocode}
+%<*!color4>
+\def\c@lor@RGB@rgb#1#2{%
+ \dimen@#1\p@
+ \divide\dimen@\@cclv
+ \edef#2{\strip@pt\dimen@}}
+%</!color4>
+% \end{macrocode}
+%
+% \begin{macrocode}
+%<*color1|color3>
+\def\color@hsb#1#2{\c@lor@@hsb#2\@@#1}
+% \end{macrocode}
+%
+% \begin{macrocode}
+\def\c@lor@@hsb#1,#2,#3\@@#4{%
+ \c@lor@arg{#1}%
+ \c@lor@arg{#2}%
+ \c@lor@arg{#3}%
+%<color1> \edef#4{hsb #1 #2 #3}%
+%<color3> \edef#4{#1 #2 #3 sethsbcolor}%
+ }
+%</color1|color3>
+% \end{macrocode}
+%
+% \begin{macrocode}
+\def\color@named#1#2{\c@lor@@named#2,,\@@#1}
+% \end{macrocode}
+%
+% \begin{macrocode}
+\def\c@lor@@named#1,#2,#3\@@#4{%
+ \@ifundefined{col@#1}%
+ {\PackageError{color}{Undefined color `#1'}\@ehd}%
+%<color1&!dvipsone> {\edef#4{ #1}}%
+%<color2> {\edef#4{ #1 \if!#2!\else #2.\fi}}%
+%<color3|dvipsone|color4> {\edef#4{\csname col@#1\endcsname}}%
+ }
+% \end{macrocode}
+%
+% Conversion from |\special| syntax to PostScript (for PSTricks).
+% \begin{macrocode}
+%<*color1|color2>
+\def\c@lor@to@ps#1 #2\@@{\csname c@lor@ps@#1\endcsname#2 \@@}
+%</color1|color2>
+%<*color3>
+\def\c@lor@to@ps#1\@@{#1}
+%</color3>
+%<*color4>
+\def\c@lor@to@ps#1#2 #3 #4\@@{%
+ #1#2 255 div #3 255 div #4 255 div setrgbcolor}
+%</color4>
+% \end{macrocode}
+%
+% \begin{macrocode}
+%<*color1>
+\def\c@lor@ps@#1 #2\@@{TeXDict begin #1 end}
+\def\c@lor@ps@rgb#1\@@{#1 setrgbcolor}
+\def\c@lor@ps@hsb#1\@@{#1 sethsbcolor}
+\def\c@lor@ps@cmyk#1\@@{#1 setcmykcolor}
+\def\c@lor@ps@gray#1\@@{#1 setgray}
+%</color1>
+%<*color2>
+\def\c@lor@to@ps@#1 #2\@@{\csname c@lor@ps@#1@\endcsname#2 \@@}
+\def\c@lor@ps@#1 #2\@@{%
+ \expandafter\expandafter\expandafter
+ \c@lor@to@ps@\csname col@#1\expandafter\endcsname\space#2. \@@{#1}}
+\def\c@lor@ps@rgb#1. #2. #3. #4\@@{#1 #2 #3 setrgbcolor}
+\def\c@lor@ps@rgb@#1. #2. #3. #4. #5\@@#6{#1 #2 #3 setrgbcolor}
+\def\c@lor@ps@cmyk#1. #2. #3. #4. #5. #6\@@{#1 #2 #3 #4 setcmykcolor}
+\def\c@lor@ps@cmyk@#1. #2. #3. #4. #5. #6\@@#7{%
+ #1 #2 #3 #4 (#7) findcustomcmykcolor
+ \if!\@firstofone#5!1 \else#5 \fi setcustomcolor}
+%</color2>
+% \end{macrocode}
+%
+% \begin{macrocode}
+%<color1&!dvipsone>\def\current@color{ Black}
+%<color1&dvipsone>\def\current@color{gray 0}
+%<color2>\def\current@color{rgb 0. 0. 0.}
+%<color3>\def\current@color{0 setgray}
+%<color4>\def\current@color{0 0 0}
+% \end{macrocode}
+%
+% \begin{macrocode}
+%<*color1>
+\def\set@color{%
+%<!dvipsone&!dvipdf> \special{color push \current@color
+%<dvipsone> \special{color push}\special{color \current@color
+%<dvipdf> \special{pdf: /C \current@color\space<<
+ }\aftergroup\reset@color}
+\def\reset@color{\special{%
+%<!dvipdf> color pop}}
+%<dvipdf> pdf: /C >> }}
+\def\set@page@color{\special{%
+%<!dvipdf> background \current@color}}
+%<dvipdf> pdf: /BG \current@color}}
+\def\define@color@named#1#2{%
+%<!dvipsone> \expandafter\let\csname col@#1\endcsname\@nnil}
+%<dvipsone> \expandafter\edef\csname col@#1\endcsname{#2}}
+%</color1>
+%<*color2>
+\def\set@color{%
+ \special{color push}%
+ \special{color \current@color}%
+ \aftergroup\reset@color}
+\def\reset@color{\special{color pop}}
+\def\set@page@color{\c@lor@special\sixt@@n{background \current@color}}
+\def\define@color@named#1#2{%
+ \AtBeginDvi{\special{color define #1 #2}}%
+ \expandafter\edef\csname col@#1\endcsname{#2}}
+%</color2>
+%<*color3>
+\def\set@color{%
+ \Gin@PS@raw{\current@color}\aftergroup\reset@color}
+\def\reset@color{\Gin@PS@raw{\current@color}}
+%</color3>
+%<*color4>
+\def\set@color{%
+ \special{textcolor: \current@color}\aftergroup\reset@color}
+\def\reset@color{\special{textcolor: \current@color}}
+%</color4>
+%<*color3|color4>
+\def\set@page@color{%
+ \c@lor@special\sixt@@n{background color ignored: \current@color}}
+\def\define@color@named#1#2{%
+ \expandafter\edef\csname col@#1\endcsname{#2}}
+%</color3|color4>
+% \end{macrocode}
+%
+% \begin{macrocode}
+%</color1|color2|color3|color4>
+% \end{macrocode}
+%
+% \begin{macrocode}
+%<*colorfix>
+\AtBeginDocument{%
+ \let\@ldc@l@r\color
+ \def\color{\if@inlabel\leavevmode\fi\@ldc@l@r}%
+ \let\@lduseb@x\usebox
+ \def\usebox#1{\@lduseb@x{#1}\set@color}}
+%</colorfix>
+% \end{macrocode}
+%
+% \begin{macrocode}
+%<*dvipsnames>
+\DefineNamedColor{named}{GreenYellow} {cmyk}{0.15,0,0.69,0}
+\DefineNamedColor{named}{Yellow} {cmyk}{0,0,1,0}
+\DefineNamedColor{named}{Goldenrod} {cmyk}{0,0.10,0.84,0}
+\DefineNamedColor{named}{Dandelion} {cmyk}{0,0.29,0.84,0}
+\DefineNamedColor{named}{Apricot} {cmyk}{0,0.32,0.52,0}
+\DefineNamedColor{named}{Peach} {cmyk}{0,0.50,0.70,0}
+\DefineNamedColor{named}{Melon} {cmyk}{0,0.46,0.50,0}
+\DefineNamedColor{named}{YellowOrange} {cmyk}{0,0.42,1,0}
+\DefineNamedColor{named}{Orange} {cmyk}{0,0.61,0.87,0}
+\DefineNamedColor{named}{BurntOrange} {cmyk}{0,0.51,1,0}
+\DefineNamedColor{named}{Bittersweet} {cmyk}{0,0.75,1,0.24}
+\DefineNamedColor{named}{RedOrange} {cmyk}{0,0.77,0.87,0}
+\DefineNamedColor{named}{Mahogany} {cmyk}{0,0.85,0.87,0.35}
+\DefineNamedColor{named}{Maroon} {cmyk}{0,0.87,0.68,0.32}
+\DefineNamedColor{named}{BrickRed} {cmyk}{0,0.89,0.94,0.28}
+\DefineNamedColor{named}{Red} {cmyk}{0,1,1,0}
+\DefineNamedColor{named}{OrangeRed} {cmyk}{0,1,0.50,0}
+\DefineNamedColor{named}{RubineRed} {cmyk}{0,1,0.13,0}
+\DefineNamedColor{named}{WildStrawberry}{cmyk}{0,0.96,0.39,0}
+\DefineNamedColor{named}{Salmon} {cmyk}{0,0.53,0.38,0}
+\DefineNamedColor{named}{CarnationPink} {cmyk}{0,0.63,0,0}
+\DefineNamedColor{named}{Magenta} {cmyk}{0,1,0,0}
+\DefineNamedColor{named}{VioletRed} {cmyk}{0,0.81,0,0}
+\DefineNamedColor{named}{Rhodamine} {cmyk}{0,0.82,0,0}
+\DefineNamedColor{named}{Mulberry} {cmyk}{0.34,0.90,0,0.02}
+\DefineNamedColor{named}{RedViolet} {cmyk}{0.07,0.90,0,0.34}
+\DefineNamedColor{named}{Fuchsia} {cmyk}{0.47,0.91,0,0.08}
+\DefineNamedColor{named}{Lavender} {cmyk}{0,0.48,0,0}
+\DefineNamedColor{named}{Thistle} {cmyk}{0.12,0.59,0,0}
+\DefineNamedColor{named}{Orchid} {cmyk}{0.32,0.64,0,0}
+\DefineNamedColor{named}{DarkOrchid} {cmyk}{0.40,0.80,0.20,0}
+\DefineNamedColor{named}{Purple} {cmyk}{0.45,0.86,0,0}
+\DefineNamedColor{named}{Plum} {cmyk}{0.50,1,0,0}
+\DefineNamedColor{named}{Violet} {cmyk}{0.79,0.88,0,0}
+\DefineNamedColor{named}{RoyalPurple} {cmyk}{0.75,0.90,0,0}
+\DefineNamedColor{named}{BlueViolet} {cmyk}{0.86,0.91,0,0.04}
+\DefineNamedColor{named}{Periwinkle} {cmyk}{0.57,0.55,0,0}
+\DefineNamedColor{named}{CadetBlue} {cmyk}{0.62,0.57,0.23,0}
+\DefineNamedColor{named}{CornflowerBlue}{cmyk}{0.65,0.13,0,0}
+\DefineNamedColor{named}{MidnightBlue} {cmyk}{0.98,0.13,0,0.43}
+\DefineNamedColor{named}{NavyBlue} {cmyk}{0.94,0.54,0,0}
+\DefineNamedColor{named}{RoyalBlue} {cmyk}{1,0.50,0,0}
+\DefineNamedColor{named}{Blue} {cmyk}{1,1,0,0}
+\DefineNamedColor{named}{Cerulean} {cmyk}{0.94,0.11,0,0}
+\DefineNamedColor{named}{Cyan} {cmyk}{1,0,0,0}
+\DefineNamedColor{named}{ProcessBlue} {cmyk}{0.96,0,0,0}
+\DefineNamedColor{named}{SkyBlue} {cmyk}{0.62,0,0.12,0}
+\DefineNamedColor{named}{Turquoise} {cmyk}{0.85,0,0.20,0}
+\DefineNamedColor{named}{TealBlue} {cmyk}{0.86,0,0.34,0.02}
+\DefineNamedColor{named}{Aquamarine} {cmyk}{0.82,0,0.30,0}
+\DefineNamedColor{named}{BlueGreen} {cmyk}{0.85,0,0.33,0}
+\DefineNamedColor{named}{Emerald} {cmyk}{1,0,0.50,0}
+\DefineNamedColor{named}{JungleGreen} {cmyk}{0.99,0,0.52,0}
+\DefineNamedColor{named}{SeaGreen} {cmyk}{0.69,0,0.50,0}
+\DefineNamedColor{named}{Green} {cmyk}{1,0,1,0}
+\DefineNamedColor{named}{ForestGreen} {cmyk}{0.91,0,0.88,0.12}
+\DefineNamedColor{named}{PineGreen} {cmyk}{0.92,0,0.59,0.25}
+\DefineNamedColor{named}{LimeGreen} {cmyk}{0.50,0,1,0}
+\DefineNamedColor{named}{YellowGreen} {cmyk}{0.44,0,0.74,0}
+\DefineNamedColor{named}{SpringGreen} {cmyk}{0.26,0,0.76,0}
+\DefineNamedColor{named}{OliveGreen} {cmyk}{0.64,0,0.95,0.40}
+\DefineNamedColor{named}{RawSienna} {cmyk}{0,0.72,1,0.45}
+\DefineNamedColor{named}{Sepia} {cmyk}{0,0.83,1,0.70}
+\DefineNamedColor{named}{Brown} {cmyk}{0,0.81,1,0.60}
+\DefineNamedColor{named}{Tan} {cmyk}{0.14,0.42,0.56,0}
+\DefineNamedColor{named}{Gray} {cmyk}{0,0,0,0.50}
+\DefineNamedColor{named}{Black} {cmyk}{0,0,0,1}
+\DefineNamedColor{named}{White} {cmyk}{0,0,0,0}
+%</dvipsnames>
+% \end{macrocode}
+%
+% \section{dvips}
+% A \LaTeXe\ graphics driver file for Tom Rokicki's \emph{dvips}
+% driver; tested with version 5.58f.
+%
+% \begin{macrocode}
+%<*dvips>
+% \end{macrocode}
+%
+% \subsection{Colour}
+% Uses the generic `color1' code.
+%
+% \subsection{File inclusion}
+%
+% \begin{macro}{\Ginclude@eps}
+% |#1| input file (or command)
+% \begin{macrocode}
+\def\Ginclude@eps#1{%
+ \message{<#1>}%
+ \bgroup
+% \end{macrocode}
+% \emph{dvips} likes to work with its own pixel resolution, so
+% mangle the sizes slightly.
+% \begin{macrocode}
+ \def\@tempa{!}%
+ \dimen@\Gin@req@width
+ \dimen@ii.1bp%
+ \divide\dimen@\dimen@ii
+ \@tempdima\Gin@req@height
+ \divide\@tempdima\dimen@ii
+ \special{PSfile="#1"\space
+ llx=\Gin@llx\space
+ lly=\Gin@lly\space
+ urx=\Gin@urx\space
+ ury=\Gin@ury\space
+ \ifx\Gin@scalex\@tempa\else rwi=\number\dimen@\space\fi
+ \ifx\Gin@scaley\@tempa\else rhi=\number\@tempdima\space\fi
+ \ifGin@clip clip\fi}%
+ \egroup}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Ginclude@bmp}
+% |#1| input file; if zero size is requested, the graphic will
+% come at `natural' size.
+% \begin{macrocode}
+\def\Ginclude@bmp#1{%
+ \message{<#1>}%
+ \dimen@\Gin@req@height
+ \advance\dimen@ by-\Gin@lly bp
+ \kern-\Gin@llx bp\raise\Gin@req@height\hbox{%
+ \ifdim\Gin@urx bp=\z@
+ \ifdim\Gin@ury bp=\z@
+ \special{em: graph #1}%
+ \else
+ \special{em: graph #1,\Gin@urx bp}%
+ \fi
+ \else
+ \special{em: graph #1,\Gin@urx bp,\Gin@ury bp}%
+ \fi
+ }%
+}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Ginclude@pict}
+% \begin{macro}{\Ginclude@pntg}
+% \begin{macro}{\oztex@include}
+% PICT/PNTG format from the Mac. Actually only currently supported by
+% the version of dvips distributed with \OzTeX, and with the built in
+% \OzTeX\ drivers, but put here anyway as it is not much code and
+% increases portability between the systems as now |[dvips]| and
+% |[oztex]| share the same back end.
+% \begin{macrocode}
+\def\oztex@include#1#2{%
+ \dimen@1bp%
+ \divide\Gin@req@width\dimen@
+ \divide\Gin@req@height\dimen@
+ \special{#1=#2\space
+ \@width=\number\Gin@req@width \space
+ \@height=\number\Gin@req@height}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+\def\Ginclude@pntg{\oztex@include{pntg}}
+\def\Ginclude@pict{\oztex@include{pict}}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \subsection{Rotation}
+% \begin{macrocode}
+\def\Grot@start{%
+ \special{ps: gsave currentpoint
+ currentpoint translate \Grot@angle\space neg
+ rotate neg exch neg exch translate}}
+\def\Grot@end{\special{ps: currentpoint grestore moveto}}
+% \end{macrocode}
+% \subsection{Scaling}
+% \begin{macrocode}
+\def\Gscale@start{\special{ps: currentpoint currentpoint translate
+ \Gscale@x\space \Gscale@y\space scale neg exch neg exch translate}}
+\def\Gscale@end{\special{ps: currentpoint currentpoint translate
+ 1 \Gscale@x\space div 1 \Gscale@y\space div scale
+ neg exch neg exch translate}}
+% \end{macrocode}
+%
+% \section{Literal Postscript}
+%
+% Raw PostScript code, no save/restore.
+% \begin{macrocode}
+\def\Gin@PS@raw#1{\special{ps: #1}}
+% \end{macrocode}
+%
+% PostScript code, to be surrounded by save/restore by the driver.
+% Coordinate system standard PostScript, but with origin
+% at current (\TeX) position.
+% \begin{macrocode}
+\def\Gin@PS@restored#1{\special{" #1}}
+% \end{macrocode}
+%
+% PostScript code to be inserted in the Header section of the final
+% PostScript. Must be issued on the first page of a document.
+% \begin{macrocode}
+\def\Gin@PS@literal@header#1{\AtBeginDvi{\special{! #1}}}
+% \end{macrocode}
+%
+% Name of external file, the contents of which are to be inserted in
+% the Header section of the final PostScript. Must be issued on the
+% first page of a document.
+% \begin{macrocode}
+\def\Gin@PS@file@header#1{\AtBeginDvi{\special{header=#1}}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+%</dvips>
+% \end{macrocode}
+%
+%
+% \section{dvipdf}
+% A \LaTeXe\ graphics driver file for \emph{dvipdf} driver.
+%
+% \begin{macrocode}
+%<*dvipdf>
+% \end{macrocode}
+%
+% \subsection{Colour}
+% Uses the generic `color1' code.
+%
+% \subsection{File inclusion}
+%
+% \begin{macro}{\Ginclude@eps}
+% |#1| input file (or command)
+% \begin{macrocode}
+\def\Ginclude@eps#1{%
+ \message{<#1>}%
+ \bgroup
+% \end{macrocode}
+% \emph{dvips} likes to work with its own pixel resolution, so
+% mangle the sizes slightly.
+% \begin{macrocode}
+ \def\@tempa{!}%
+ \dimen@\Gin@req@width
+ \dimen@ii.1bp%
+ \divide\dimen@\dimen@ii
+ \@tempdima\Gin@req@height
+ \divide\@tempdima\dimen@ii
+ \special{PSfile="#1"\space
+ llx=\Gin@llx\space
+ lly=\Gin@lly\space
+ urx=\Gin@urx\space
+ ury=\Gin@ury\space
+ \ifx\Gin@scalex\@tempa\else rwi=\number\dimen@\space\fi
+ \ifx\Gin@scaley\@tempa\else rhi=\number\@tempdima\space\fi
+ \ifGin@clip clip\fi}%
+ \egroup}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Ginclude@bmp}
+% |#1| input file; if zero size is requested, the graphic will
+% come at `natural' size.
+% \begin{macrocode}
+\def\Ginclude@bmp#1{%
+ \message{<#1>}%
+ \dimen@\Gin@req@height
+ \advance\dimen@ by-\Gin@lly bp
+ \kern-\Gin@llx bp\raise\Gin@req@height\hbox{%
+ \ifdim\Gin@urx bp=\z@
+ \ifdim\Gin@ury bp=\z@
+ \special{pdf: /GRAPH #1}%
+ \else
+ \special{pdf: /GRAPH #1 \number\Gin@req@width sp}%
+ \fi
+ \else
+ \special{pdf: /GRAPH #1 \number\Gin@req@width sp
+ \number\Gin@req@height sp}%
+ \fi}}
+% \end{macrocode}
+% \end{macro}
+%
+% \subsection{Rotation}
+% \begin{macrocode}
+\def\Grot@start{%
+\special{pdf: /ROT \Grot@angle\space << }}
+\def\Grot@end{\special{pdf: /ROT >> }}
+% \end{macrocode}
+%
+% \subsection{Scaling}
+% \begin{macrocode}
+\def\Gscale@start{\special{pdf: /S \Gscale@x\space \Gscale@y\space << }}
+\def\Gscale@end{\special{pdf: /S \space >> }}
+% \end{macrocode}
+%
+% \section{Literal Postscript}
+%
+% Raw PostScript code, no save/restore.
+% \begin{macrocode}
+\def\Gin@PS@raw#1{\special{ps: #1}}
+% \end{macrocode}
+%
+% PostScript code, to be surrounded by save/restore by the driver.
+% Coordinate system standard PostScript, but with origin
+% at current (\TeX) position.
+% \begin{macrocode}
+\def\Gin@PS@restored#1{\special{" #1}}
+% \end{macrocode}
+%
+% PostScript code to be inserted in the Header section of the final
+% PostScript. Must be issued on the first page of a document.
+% \begin{macrocode}
+\def\Gin@PS@literal@header#1{\AtBeginDvi{\special{! #1}}}
+% \end{macrocode}
+%
+% Name of external file, the contents of which are to be inserted in
+% the Header section of the final PostScript. Must be issued on the
+% first page of a document.
+% \begin{macrocode}
+\def\Gin@PS@file@header#1{\AtBeginDvi{\special{header=#1}}}
+% \end{macrocode}
+%
+% \subsection{File extensions}
+%
+% \begin{macrocode}
+\@namedef{Gin@rule@.msp}#1{{bmp}{.bb}{#1}}
+\@namedef{Gin@rule@.jpg}#1{{bmp}{.bb}{#1}}
+\@namedef{Gin@rule@.bmp}#1{{bmp}{.bb}{#1}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+%</dvipdf>
+% \end{macrocode}
+%
+% \section{\OzTeX}
+%
+% A \LaTeXe\ graphics driver file for \OzTeX\
+% (versions 1.42 and later),
+% by Andrew Trevorrow.
+% \begin{macrocode}
+%<*oztex>
+% \end{macrocode}
+%\subsection{Graphics inclusion}
+% \begin{macrocode}
+\def\Ginclude@eps{\Oztex@Include{epsf}}
+\def\Ginclude@pntg{\Oztex@Include{pntg}}
+\def\Ginclude@pict{\Oztex@Include{pict}}
+\def\Oztex@Include#1#2{%
+ \ifGin@clip
+ \typeout{No clipping support in OzTeX}%
+ \fi
+ \divide\Gin@req@width by 65781% convert sp to bp
+ \divide\Gin@req@height by 65781%
+ \special{#1=#2\space
+ width=\number\Gin@req@width \space
+ height=\number\Gin@req@height
+ }%
+}
+%</oztex>
+% \end{macrocode}
+%\section{Textures}
+% A \LaTeXe\ graphics driver file for Blue Sky's Textures
+%
+% \textbf{WARNING! There is ongoing work to produce a new version of
+% the textures support. Do not rely on anything in this file being in
+% the next version!}
+%
+%
+% \begin{macrocode}
+%<*textures>
+% \end{macrocode}
+% \subsection{Graphics inclusion}
+%
+%
+% \begin{macrocode}
+\PackageInfo{graphics/color}
+ {This file uses the advanced color support\MessageBreak
+ available in textures1.7\MessageBreak
+ If you are using color with an earlier version\MessageBreak
+ of textures, edit graphics.ins where marked,\MessageBreak
+ and re-latex graphics.ins.\MessageBreak\MessageBreak
+ If you are using textures1.7\MessageBreak
+ you may want to delete this warning\MessageBreak
+ from textures.def.\MessageBreak\MessageBreak
+ The code for scaling/rotation and file inclusion\MessageBreak
+ in this file is still rudimentary, and does not\MessageBreak
+ use textures' full capabilities.\MessageBreak\MessageBreak
+ A new textures.def is currently being developed\@gobble}
+% \end{macrocode}
+%
+%
+% \begin{macrocode}
+\def\Ginclude@eps{\Textures@Include{illustration}}
+\def\Ginclude@pict{\Textures@Include{pictfile}}
+\def\Textures@Include#1#2{%
+ \def\@tempa{!}%
+ \ifx\Gin@scaley\@tempa
+ \let\Gin@scaley\Gin@scalex
+ \else
+ \ifx\Gin@scalex\@tempa\let\Gin@scalex\Gin@scaley\fi
+ \fi
+ \setlength\@tempdima{\Gin@scalex pt}%
+ \setlength\@tempdimb{\Gin@scaley pt}%
+ \ifdim\@tempdima>\@tempdimb
+ \let\Gin@scalex\Gin@scaley
+ \fi
+ \ifGin@clip
+ \typeout{no clipping support in Textures}%
+ \fi
+ \@tempdimb=1000sp%
+ \setlength\@tempdima{\Gin@scalex\@tempdimb}%
+ \special{#1 #2\space scaled \number\@tempdima}%
+}
+% \end{macrocode}
+% \subsection{Rotation}
+% This code was written when no unprotected postscript code was allowed;
+% it could almost certainly be rewritten now with `rawpostscript'.
+% \begin{macrocode}
+\def\Grot@start{\special{postscript
+ 0 0 transform
+ grestore
+ matrix currentmatrix
+ 3 1 roll
+ itransform
+ dup 3 -1 roll
+ dup 4 1 roll exch
+ translate
+ \Grot@angle\space neg rotate
+ neg exch neg exch translate
+ gsave}}
+\def\Grot@end{\special{postscript grestore setmatrix gsave}}
+% \end{macrocode}
+% \subsection{Colour}
+% This will only work for versions 1.6 and Version 1.7 uses `color2'.
+% \begin{macrocode}
+%<color3>\def\Gin@PS@raw#1{\special{rawpostscript #1}}
+%</textures>
+% \end{macrocode}
+%
+% \section{dvialw}
+% A \LaTeXe\ graphics driver file for dvialw, by Nelson Beebe
+% \begin{macrocode}
+%<*dvialw>
+% \end{macrocode}
+% \subsection{Rotation}
+% \begin{macrocode}
+\def\Ginclude@eps#1{%
+ \def\@tempa{!}%
+ \ifx\Gin@scaley\@tempa
+ \let\Gin@scaley\Gin@scalex
+ \else
+ \ifx\Gin@scalex\@tempa\let\Gin@scalex\Gin@scaley\fi
+ \fi
+ \ifGin@clip
+ \typeout{no clipping support in dvialw}%
+ \fi
+ \special{language "PS",
+ literal "\Gin@scalex\space
+ \Gin@scaley\space scale",
+ position = "bottom left",
+ include "#1\space"}%
+}
+%</dvialw>
+% \end{macrocode}
+% \section{emtex}
+% A \LaTeXe\ graphics driver file for Eberhard Mattes' emTeX
+% \begin{macrocode}
+%<*emtex>
+% \end{macrocode}
+% \subsection{Graphics file inclusion}
+% \begin{macrocode}
+\def\Ginclude@bmp#1{%
+ \raise\Gin@req@height\hbox{\special{em:graph #1}}%
+\typeout{WARNING: emtex does not permit graphics to be scaled}%
+}
+%</emtex>
+% \end{macrocode}
+% \section{dvilaser/ps}
+% A \LaTeXe\ graphics driver file for Arbortext's dvilaser/ps
+% \begin{macrocode}
+%<*dvilaser>
+% \end{macrocode}
+%\subsection{Graphic file inclusion}
+% \begin{macrocode}
+\def\Ginclude@eps#1{%
+\ifGin@clip
+ \typeout{no clipping support in dvilaser/ps}%
+\fi
+\special{ps: epsfile #1\space \the\Gin@req@width}%
+}
+%</dvilaser>
+% \end{macrocode}
+% \section{psprint}
+% A \LaTeXe\ graphics driver file for Trevorrow's psprint
+% \begin{macrocode}
+%<*psprint>
+% \end{macrocode}
+%\subsection{Graphic file inclusion}
+% \begin{macrocode}
+\def\Ginclude@eps#1{%
+ \def\@tempa{!}%
+ \ifx\Gin@scaley\@tempa
+ \let\Gin@scaley\Gin@scalex
+ \else
+ \ifx\Gin@scalex\@tempa\let\Gin@scalex\Gin@scaley\fi
+ \fi
+ \ifGin@clip
+ \typeout{no clipping support in psprint}%
+ \fi
+ \special{#1\space
+ \Gin@scalex\space \Gin@scaley\space scale
+ \Gin@llx\space neg
+ \Gin@lly \space neg translate
+}%
+}
+%</psprint>
+% \end{macrocode}
+% \section{dvipsone}
+%
+% A \LaTeXe\ graphics driver file for Y\&Y's dvipsone
+% \begin{macrocode}
+%<*dvipsone>
+% \end{macrocode}
+%
+% \subsection{Graphic file inclusion}
+%
+% PostScript Files.
+% \begin{macrocode}
+\def\Ginclude@eps#1{%
+ \message{<#1>}%
+ \bgroup
+ \def\@tempa{!}%
+ \dimen@\Gin@req@width
+ \dimen@ii.1bp%
+ \divide\dimen@\dimen@ii
+ \@tempdima\Gin@req@height
+ \divide\@tempdima\dimen@ii
+ \special{PSfile="#1"\space
+ llx=\Gin@llx\space
+ lly=\Gin@lly\space
+ urx=\Gin@urx\space
+ ury=\Gin@ury\space
+ \ifx\Gin@scalex\@tempa\else rwi=\number\dimen@\space\fi
+ \ifx\Gin@scaley\@tempa\else rhi=\number\@tempdima\space\fi
+ \ifGin@clip clip\fi}%
+ \egroup}
+% \end{macrocode}
+%
+% Tiff files.
+% \begin{macrocode}
+\def\Ginclude@tiff#1{%
+\message{<#1>}%
+ \special{insertimage: #1 \number\Gin@req@width\space
+ \number\Gin@req@height}}
+% \end{macrocode}
+%
+% Windows Metafiles.
+% \begin{macrocode}
+\def\Ginclude@wmf#1{%
+ \message{<#1>}%
+ \special{insertmf: #1 0 0 \number\Gin@req@width\space
+ \number\Gin@req@height}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+% \end{macrocode}
+%
+% \begin{macrocode}
+\def\Gin@PS@raw#1{\special{ps: #1}}
+% \end{macrocode}
+%
+% \subsection{Rotation}
+% \begin{macrocode}
+\def\Grot@start{%
+ \special{ps: gsave currentpoint
+ currentpoint translate \Grot@angle\space
+ rotate neg exch neg exch translate}}
+\def\Grot@end{%
+ \special{ps: currentfont currentpoint grestore moveto setfont}}
+% \end{macrocode}
+%
+% \subsection{Scaling}
+% \begin{macrocode}
+\def\Gscale@start{\special{ps: currentpoint currentpoint translate
+ \Gscale@x\space \Gscale@y\space scale neg exch neg exch translate}}
+\def\Gscale@end{\special{ps: currentpoint currentpoint translate
+ 1 \Gscale@x\space div 1 \Gscale@y\space div scale
+ neg exch neg exch translate}}
+% \end{macrocode}
+%
+% \subsection{File Extensions}
+%
+% \begin{macrocode}
+\@namedef{Gin@rule@.wmf}#1{{wmf}{}{#1}}
+\@namedef{Gin@rule@.clp}#1{{wmf}{}{#1}}
+% \end{macrocode}
+%
+% \section{Literal Postscript}
+%
+% Raw PostScript code, no save/restore.
+% \begin{macrocode}
+\def\Gin@PS@raw#1{\special{ps: #1}}
+% \end{macrocode}
+%
+% PostScript code, to be surrounded by save/restore by the driver.
+% Coordinate system standard PostScript, but with origin
+% at current (\TeX) position.
+% \begin{macrocode}
+\def\Gin@PS@restored#1{\special{" #1}}
+% \end{macrocode}
+%
+% PostScript code to be inserted in the Header section of the final
+% PostScript. Must be issued on the first page of a document.
+% \begin{macrocode}
+\def\Gin@PS@literal@header#1{\AtBeginDvi{\special{headertext=#1}}}
+% \end{macrocode}
+%
+% Name of external file, the contents of which are to be inserted in
+% the Header section of the final PostScript. Must be issued on the
+% first page of a document.
+% \begin{macrocode}
+\def\Gin@PS@file@header#1{\AtBeginDvi{\special{header=#1}}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+%</dvipsone>
+% \end{macrocode}
+%
+% \section{dviwindo}
+% A \LaTeXe\ graphics driver file for Y\&Y's dviwindo.
+%
+% This driver now uses the same file as |dvipsone|.
+%
+% \section{dvitops}
+% A \LaTeXe\ graphics driver file for James Clark's dvitops
+% \begin{macrocode}
+%<*dvitops>
+% \end{macrocode}
+% \subsection{Rotation}
+% \begin{macrocode}
+\newcount\Grot@count
+\Grot@count=\@ne
+\def\Grot@start{\special{dvitops: origin
+ rot\the\@tempdima}%
+\special{dvitops: begin rot\the\Grot@count}}%
+\def\Grot@end{\special{dvitops: end}%
+\special{dvitops: rotate rot\the\Grot@count \space
+ \Grot@angle}%
+\global\advance\Grot@count by\@ne}%
+% \end{macrocode}
+% \subsection{Graphic file inclusion}
+% \begin{macrocode}
+\def\Ginclude@eps#1{%
+% These cause an arithmetic overflow, so I've commented them
+% out. Presumably they were there for some reason.
+% Any dvitops users out there??
+% \multiply\Gin@req@width by \@m
+% \multiply\Gin@req@height by \@m
+\ifGin@clip
+ \typeout{no clipping support in dvitops}%
+\fi
+\special{import #1\space \the\Gin@req@width\space
+ \the\Gin@req@height\space fill}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+%</dvitops>
+% \end{macrocode}
+%
+%\section{dvi2ps}
+% A \LaTeXe\ graphics driver file for original dvi2ps
+% \begin{macrocode}
+%<*dvi2ps>
+% \end{macrocode}
+%
+% \subsection{Graphic file inclusion}
+% \begin{macrocode}
+\def\Ginclude@eps#1{%
+ \def\@tempa{!}%
+ \ifx\Gin@scaley\@tempa
+ \let\Gin@scaley\Gin@scalex
+ \else
+ \ifx\Gin@scalex\@tempa\let\Gin@scalex\Gin@scaley\fi
+ \fi
+ \ifGin@clip
+ \typeout{no clipping support in dvi2ps}%
+ \fi
+ \special{psfile=#1\space
+ hscale=\Gin@scalex\space 1000 mul
+ vscale=\Gin@scaley\space 1000 mul}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+%</dvi2ps>
+% \end{macrocode}
+%
+% \section{pctexps}
+% A \LaTeXe\ graphics driver file for Personal TeX's PTI Laser/PS;
+% from information supplied by Lance Carnes and Tao Wang
+% |<pti@crl.com>|.
+% \begin{macrocode}
+%<*pctexps>
+% \end{macrocode}
+%
+% \subsection{Graphic file inclusion}
+%
+% \begin{macrocode}
+\def\Ginclude@eps#1{%
+\message{<#1>}%
+ \ifGin@clip
+ \typeout{no clipping support in pctexps}%
+ \fi
+ \Gin@req@width.03515\Gin@req@width
+ \Gin@req@height.03515\Gin@req@height
+ \special{ps:#1\space x=\strip@pt\Gin@req@width cm,
+ y=\strip@pt\Gin@req@height cm}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+\def\Ginclude@ps#1{%
+\message{<#1>}%
+ \ifGin@clip
+ \typeout{no clipping support in pctexps}%
+ \fi
+ \hbox{\kern-\Gin@llx bp\raise-\Gin@lly bp\hbox{\special{ps:#1}}}%
+ \typeout{^^J%
+---------------------------------------------------------^^J%
+.ps graphics without bounding box information cannot be^^J%
+scaled. If the file actually contains the information,^^J%
+please rename the file to .eps file extension.^^J%
+---------------------------------------------------------^^J}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+\def\Gin@extensions{.eps,.ps}
+\@namedef{Gin@rule@.ps}#1{{ps}{.ps}{#1}}
+\@namedef{Gin@rule@.eps}#1{{eps}{.eps}{#1}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+\def\Gin@PS@raw#1{\special{ps::#1}}
+\def\Grot@start{%
+ \special{ps::gsave currentpoint
+ currentpoint translate \Grot@angle\space
+ rotate neg exch neg exch translate}}
+\def\Grot@end{\special{ps:: currentpoint grestore moveto}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+\def\Gscale@start{\special{ps:: currentpoint currentpoint translate
+ \Gscale@x\space \Gscale@y\space scale neg exch neg exch translate}}
+\def\Gscale@end{\special{ps:: currentpoint currentpoint translate
+ 1 \Gscale@x\space div 1 \Gscale@y\space div scale
+ neg exch neg exch translate}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+%</pctexps>
+% \end{macrocode}
+%
+% \section{pctex32}
+% A \LaTeXe\ graphics driver file for Personal TeX's PC TeX for 32 bit
+% Windows; Code supplied by Tao Wang |<pti@crl.com>|.
+%
+% \subsection{Colour}
+% Uses the generic `color1' code.
+%
+% \begin{macrocode}
+%<*pctex32>
+% \end{macrocode}
+%
+% \subsection{Graphic file inclusion}%
+% \begin{macrocode}
+% including PostScript graphics
+\def\Ginclude@eps#1{%
+ \message{<#1>}%
+ \bgroup
+ \def\@tempa{!}%
+ \dimen@\Gin@req@width
+ \dimen@ii.1bp%
+ \divide\dimen@\dimen@ii
+ \@tempdima\Gin@req@height
+ \divide\@tempdima\dimen@ii
+ \special{PSfile="#1"\space
+ llx=\Gin@llx\space
+ lly=\Gin@lly\space
+ urx=\Gin@urx\space
+ ury=\Gin@ury\space
+ \ifx\Gin@scalex\@tempa\else rwi=\number\dimen@\space\fi
+ \ifx\Gin@scaley\@tempa\else rhi=\number\@tempdima\space\fi
+ \ifGin@clip clip\fi}%
+ \egroup}
+% \end{macrocode}
+%
+% including BMP graphics
+% \begin{macrocode}
+\def\Ginclude@bmp#1{%
+\message{<#1>}%
+ \ifGin@clip
+ \typeout{no clipping support for BMP graphics in PCTeX32}%
+ \fi
+ \Gin@req@width.03515\Gin@req@width
+ \Gin@req@height.03515\Gin@req@height
+ \special{bmp:#1\space x=\strip@pt\Gin@req@width cm,
+ y=\strip@pt\Gin@req@height cm}}
+% \end{macrocode}
+%
+% including WMF graphics
+% \begin{macrocode}
+\def\Ginclude@wmf#1{%
+\message{<#1>}%
+ \ifGin@clip
+ \typeout{no clipping support for WMF graphics in PCTeX32}%
+ \fi
+ \Gin@req@width.03515\Gin@req@width
+ \Gin@req@height.03515\Gin@req@height
+ \special{wmf:#1\space x=\strip@pt\Gin@req@width cm,
+ y=\strip@pt\Gin@req@height cm}}
+% \end{macrocode}
+%
+% \subsection{Scaling and Rotating}
+% PostScript rotation and scaling
+% \begin{macrocode}
+\def\Grot@start{%
+ \special{ps:: gsave currentpoint
+ currentpoint translate \Grot@angle\space neg
+ rotate neg exch neg exch translate}}
+\def\Grot@end{\special{ps:: currentpoint grestore moveto}}
+\def\Gscale@start{\special{ps:: currentpoint currentpoint translate
+ \Gscale@x\space \Gscale@y\space scale neg exch neg exch translate}}
+\def\Gscale@end{\special{ps:: currentpoint currentpoint translate
+ 1 \Gscale@x\space div 1 \Gscale@y\space div scale
+ neg exch neg exch translate}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+\def\Gin@PS@raw#1{\special{ps:: #1}}
+\def\Gin@PS@restored#1{\special{" #1}}
+% \end{macrocode}
+%
+% \subsection{Default Extensions}
+%
+% \begin{macrocode}
+\def\Gin@extensions{.eps,.ps,.wmf,.bmp}
+\@namedef{Gin@rule@.ps}#1{{eps}{.ps}{#1}}
+\@namedef{Gin@rule@.eps}#1{{eps}{.eps}{#1}}
+\@namedef{Gin@rule@.bmp}#1{{bmp}{}{#1}}
+\@namedef{Gin@rule@.wmf}#1{{wmf}{}{#1}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+%</pctex32>
+% \end{macrocode}
+%
+% \section{pctexwin}
+% A \LaTeXe\ graphics driver file for Personal TeX's PC TeX for Windows;
+% from information supplied by Lance Carnes and Tao Wang
+% |<pti@crl.com>|.
+% \begin{macrocode}
+%<*pctexwin>
+% \end{macrocode}
+%
+% \subsection{Graphic file inclusion}
+%
+% \begin{macrocode}
+\def\Ginclude@eps#1{%
+\message{<#1>}%
+ \ifGin@clip
+ \typeout{no clipping support in pctexwin}%
+ \fi
+ \Gin@req@width.03515\Gin@req@width
+ \Gin@req@height.03515\Gin@req@height
+ \special{eps:#1\space x=\strip@pt\Gin@req@width cm,
+ y=\strip@pt\Gin@req@height cm}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+\def\Ginclude@ps#1{%
+\message{<#1>}%
+ \ifGin@clip
+ \typeout{no clipping support in pctexwin}%
+ \fi
+ \hbox{\kern-\Gin@llx bp\raise-\Gin@lly bp\hbox{\special{ps:#1}}}%
+ \typeout{^^J%
+---------------------------------------------------------^^J%
+.ps graphics without bounding box information cannot be^^J%
+scaled. If the file actually contains the information,^^J%
+please rename the file to .eps file extension.^^J%
+---------------------------------------------------------^^J%
+}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+\def\Ginclude@bmp#1{%
+\message{<#1>}%
+ \ifGin@clip
+ \typeout{no clipping support in pctexwin}%
+ \fi
+ \Gin@req@width.03515\Gin@req@width
+ \Gin@req@height.03515\Gin@req@height
+ \special{bmp:#1\space x=\strip@pt\Gin@req@width cm,
+ y=\strip@pt\Gin@req@height cm}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+\def\Ginclude@wmf#1{%
+\message{<#1>}%
+ \ifGin@clip
+ \typeout{no clipping support in pctexwin}%
+ \fi
+ \Gin@req@width.03515\Gin@req@width
+ \Gin@req@height.03515\Gin@req@height
+ \special{wmf:#1\space x=\strip@pt\Gin@req@width cm,
+ y=\strip@pt\Gin@req@height cm}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+\def\Gin@extensions{.eps,.ps,.wmf,.bmp}
+\@namedef{Gin@rule@.bmp}#1{{bmp}{}{#1}}
+\@namedef{Gin@rule@.wmf}#1{{wmf}{}{#1}}
+\@namedef{Gin@rule@.ps}#1{{ps}{.ps}{#1}}
+\@namedef{Gin@rule@.eps}#1{{eps}{.eps}{#1}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+%</pctexwin>
+% \end{macrocode}
+%
+% \section{pctexhp}
+% A \LaTeXe\ graphics driver file for Personal TeX's PTI Laser/HP;
+% from information supplied by Lance Carnes and Tao Wang
+% |<pti@crl.com>|.
+% \begin{macrocode}
+%<*pctexhp>
+% \end{macrocode}
+% \subsection{Graphic file inclusion}
+% \begin{macrocode}
+\def\Ginclude@pcl#1{%
+\message{<#1>}%
+ \ifGin@clip
+ \typeout{no clipping support in pctexhp}%
+ \fi
+ \hbox{\kern-\Gin@llx bp\raise-\Gin@lly bp\hbox{\special{pcl:#1}}}%
+ \typeout{WARNING: pctexhp does not permit graphics to be scaled}}
+\@namedef{Gin@rule@.pcl}#1{{pcl}{}{#1}}
+\def\Gin@extensions{.pcl}
+%</pctexhp>
+% \end{macrocode}
+%
+% \section{pubps}
+% A \LaTeXe\ graphics driver file for Arbortext's PUBps;
+% information from Peter R Wilson |pwilson@rdrc.rpi.edu|.
+% \begin{macrocode}
+%<*pubps>
+% \end{macrocode}
+% \subsection{Rotation}
+% \begin{macrocode}
+\def\Grot@start{\special{ps: gsave currentpoint
+ currentpoint translate \Grot@angle\space
+ rotate neg exch neg exch translate}}
+\def\Grot@end{\special{ps: currentpoint grestore moveto}}
+%</pubps>
+% \end{macrocode}
+%
+% \section{dviwin}
+% A \LaTeXe\ graphics driver file for Hippocrates Sendoukas' dviwin
+% \begin{macrocode}
+%<*dviwin>
+% \end{macrocode}
+% \subsection{Graphic file inclusion}
+% Dviwin sorts out the graphics type itself based on extension.
+% They all use the same |\special|, so as far as graphics.sty is
+% concerned they are all the same `type'. Use `bmp' for the type
+% as that is as good a name as any. Make this the default.
+% \begin{macrocode}
+\@namedef{Gin@rule@*}#1{{bmp}{}{#1}}
+\def\Ginclude@bmp#1{%
+ \raise\Gin@req@height\hbox{%
+ \special{anisoscale #1,
+ \the\Gin@req@width\space \the\Gin@req@height}}}
+% \end{macrocode}
+% The only exception is EPS files, as they may be read for BoundingBox
+% \begin{macrocode}
+\@namedef{Gin@rule@.ps}#1{{eps}{.ps}{#1}}
+\@namedef{Gin@rule@.eps}#1{{eps}{.eps}{#1}}
+\let\Ginclude@eps\Ginclude@bmp
+% \end{macrocode}
+% Add a few default extensions so |\includegraphics{a}|
+% will pick up |a.eps| or |a.wmf|.
+% This list can be reset with |\DeclareGraphicsExtensions|.
+% Other extensions not in the list may be used explicitly, eg
+% |\includegraphics{a.gif}| should work as long as dviwin has access
+% to a gif filter. If |.gif| is added using |\DeclareGraphicsExtensions|
+% then |\includegraphics{a}| would also find |a.gif|.
+% \begin{macrocode}
+\def\Gin@extensions{.eps,.ps,.wmf,.tif}
+% \end{macrocode}
+%
+% \begin{macrocode}
+%</dviwin>
+% \end{macrocode}
+%
+% \section{ln}
+% A \LaTeXe\ graphics driver file for B Hamilton Kelly's ln03 driver.
+% Untested, but based on the graphics macros distributed with the
+% driver.
+% \begin{macrocode}
+%<*ln>
+% \end{macrocode}
+% \subsection{Graphic file inclusion}
+% \begin{macrocode}
+\def\Ginclude@sixel#1{\special{ln03:sixel #1}}
+%</ln>
+% \end{macrocode}
+%
+% \section{trutex}
+% A \LaTeXe\ graphics driver file for Kinch `truetex' driver.
+% \begin{macrocode}
+%<*truetex>
+% \end{macrocode}
+%
+% \subsection{Colour}
+% Uses the `color4' colour code.
+%
+% \subsection{Graphic file inclusion}
+%
+% EPS File inclusion: DVIPS style.
+% \begin{macrocode}
+\def\Ginclude@eps#1{%
+ \message{<#1>}%
+ \bgroup
+ \def\@tempa{!}%
+ \dimen@\Gin@req@width
+ \dimen@ii.1bp%
+ \divide\dimen@\dimen@ii
+ \@tempdima\Gin@req@height
+ \divide\@tempdima\dimen@ii
+ \special{PSfile="#1"\space
+ llx=\Gin@llx\space
+ lly=\Gin@lly\space
+ urx=\Gin@urx\space
+ ury=\Gin@ury\space
+ \ifx\Gin@scalex\@tempa\else rwi=\number\dimen@\space\fi
+ \ifx\Gin@scaley\@tempa\else rhi=\number\@tempdima\space\fi
+ \ifGin@clip clip\fi}%
+ \egroup}
+% \end{macrocode}
+%
+% bmp File Inclusion.
+% \begin{macrocode}
+\def\Ginclude@bmp#1{%
+ \message{<#1>}%
+ \special{bmpfile #1}}
+% \end{macrocode}
+%
+% tif(f) File inclusion
+% \begin{macrocode}
+\def\Ginclude@tiff#1{%
+ \message{<#1>}%
+ \special{tifffile #1}}
+% \end{macrocode}
+%
+% \subsection{Literal PostScript}
+% This is not supported, so uses `nops' code.
+%
+% \subsection{Default Rules}
+% Support (e)ps, tif and bmp, default to eps.
+% \begin{macrocode}
+\def\Gin@extensions{.eps,.ps}
+\@namedef{Gin@rule@.ps}#1{{eps}{.ps}{#1}}
+\@namedef{Gin@rule@.eps}#1{{eps}{.eps}{#1}}
+\@namedef{Gin@rule@.tif}#1{{tiff}{}{#1}}
+\@namedef{Gin@rule@.bmp}#1{{bmp}{}{#1}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+\@namedef{Gin@rule@*}#1{{eps}{\Gin@ext}{#1}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+%</truetex>
+% \end{macrocode}
+%
+% \section{tcidvi}
+% A \LaTeXe\ graphics driver file for Scientific Word/Workplace.
+% Actually for the Kinch truetex driver, augmented with extra
+% |\special| handling with the DLL supplied with SW.
+% \begin{macrocode}
+%<*tcidvi>
+% \end{macrocode}
+%
+% \subsection{Colour}
+% Uses the `color4' colour code.
+%
+% The above colours are handled by the Kinch-supplied dll
+% The TCI dll adds support for |\colorbox|, but only grey scale
+% The code below accepts any color model, but only the red
+% component is used.
+% \begin{macrocode}
+\AtBeginDocument{\def\color@block#1#2#3{%
+ {\rlap{\ifcolors@
+ \@defaultunits\count@\current@color\@nnil
+ \dimen@\count@\p@
+ \divide\dimen@\@cclv
+ \dimen@ii#2%
+ \advance\dimen@ii#3%
+ \lower#3\hbox{%
+ \special{language "Scientific Word";%
+ type "greybox";%
+ greyscale \strip@pt\dimen@;%
+ height \the\dimen@ii;%
+ width \the#1;%
+ depth 0pt;}}%
+ \fi}}}}
+% \end{macrocode}
+%
+% \subsection{Graphic file inclusion}
+%
+% EPS File inclusion.
+% \begin{macrocode}
+\def\Ginclude@eps#1{%
+ \message{<#1>}%
+ \raise\Gin@req@height\hbox{%
+% \end{macrocode}
+%
+% If the bounding box has been changed by a trim or viewport
+% key then need to calculate the crop ratios based on the original
+% bb coordinates. (This assumes that clip key is also used).
+% \begin{macrocode}
+ \ifx\Gin@ollx\@undefined
+ \else
+ \@tempdimb \Gin@ourx bp%
+ \advance\@tempdimb-\Gin@ollx bp%
+ \@tempdima\Gin@llx bp%
+ \advance\@tempdima-\Gin@ollx bp%
+ \Gscale@div\TCI@cropleft\@tempdima\@tempdimb
+ \@tempdima\Gin@urx bp%
+ \advance\@tempdima-\Gin@ollx bp%
+ \Gscale@div\TCI@cropright\@tempdima\@tempdimb
+ \@tempdimb \Gin@oury bp%
+ \advance\@tempdimb-\Gin@olly bp%
+ \@tempdima\Gin@lly bp%
+ \advance\@tempdima-\Gin@olly bp%
+ \Gscale@div\TCI@cropbottom\@tempdima\@tempdimb
+ \@tempdima\Gin@ury bp%
+ \advance\@tempdima-\Gin@olly bp%
+ \Gscale@div\TCI@croptop\@tempdima\@tempdimb
+ \fi
+% \end{macrocode}
+%
+% \begin{macrocode}
+ \special{%
+ language \TCI@language;%
+ type \TCI@type;%
+ valid_file \TCI@validfile;%
+ width \the\Gin@req@width;%
+ height \the\Gin@req@height;%
+ depth 0pt;%
+ original-width \the\Gin@nat@width;%
+ original-height \the\Gin@nat@height;%
+ cropleft "\TCI@cropleft";%
+ croptop "\TCI@croptop";%
+ cropright "\TCI@cropright";%
+ cropbottom "\TCI@cropbottom";%
+ filename '#1';%
+ \ifx\TCI@temp\@empty\else tempfilename \TCI@temp;\fi
+ }}}
+% \end{macrocode}
+%
+% Default values so documents produced elsewhere should work
+% \begin{macrocode}
+\def\TCI@language{"Scientific Word"}
+\def\TCI@type{"GRAPHIC"}
+\def\TCI@validfile{'F'}
+\def\TCI@cropleft{0}
+\def\TCI@croptop{1}
+\def\TCI@cropright{1}
+\def\TCI@cropbottom{0}
+\let\TCI@temp\@empty
+% \end{macrocode}
+%
+% Non PS Graphic files.
+%
+% File inclusion macro is always the same. Use a different name though
+% as LaTeX thinks it can read eps files for BoundingBox.
+% \begin{macrocode}
+\let\Ginclude@bmp\Ginclude@eps
+% \end{macrocode}
+%
+% \subsection{Literal PostScript}
+% This is not supported, so uses `nops' code.
+%
+% \subsection{Default Rules}
+% SW always gives the full name with extension.
+% So leave this list empty.
+% \begin{macrocode}
+\def\Gin@extensions{}
+% \end{macrocode}
+%
+% .ps .PS .eps .EPS are (E)PS
+% rest are `bmp' which is a catch all type for anything
+% that the inport filter can handle.
+% \begin{macrocode}
+\@namedef{Gin@rule@.ps}#1{{eps}{.ps}{#1}}
+\@namedef{Gin@rule@.eps}#1{{eps}{.eps}{#1}}
+\@namedef{Gin@rule@.PS}#1{{eps}{.PS}{#1}}
+\@namedef{Gin@rule@.EPS}#1{{eps}{.EPS}{#1}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+\@namedef{Gin@rule@*}#1{{bmp}{\Gin@ext}{#1}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+%</tcidvi>
+% \end{macrocode}
+%
+% \section{Literal Postscript}
+% Most drivers writing to PostScript allow some form of `literal'
+% PostScript |\special| that inserts code into the final PostScript
+% output. However Non-PS drivers can not support this (and some PS
+% one's can't either). The code here makes all these commands no ops.
+% Individual driver sections may define the commands to do something
+% useful.
+%
+% \begin{macrocode}
+%<*nops>
+% \end{macrocode}
+%
+% Raw PostScript code, no save/restore. Coordinate system unspecified.
+% \begin{macrocode}
+\def\Gin@PS@raw#1{}
+% \end{macrocode}
+%
+% PostScript code, to be surrounded by save/restore by the driver.
+% Coordinate system standard PostScript, but with origin
+% at current (\TeX) position.
+% \begin{macrocode}
+\def\Gin@PS@restored#1{}
+% \end{macrocode}
+%
+% PostScript code to be inserted in the Header section of the final
+% PostScript. Must be issued on the first page of a document.
+% \begin{macrocode}
+\def\Gin@PS@literal@header#1{}
+% \end{macrocode}
+%
+% Name of external file, the contents of which are to be inserted in
+% the Header section of the final PostScript. Must be issued on the
+% first page of a document.
+% \begin{macrocode}
+\def\Gin@PS@file@header#1{}
+% \end{macrocode}
+%
+% \begin{macrocode}
+%</nops>
+% \end{macrocode}
+%
+% \section{Graphics Inclusion Rules}
+% \begin{macrocode}
+%<*psrules>
+% \end{macrocode}
+%
+% \begin{macrocode}
+\def\Gin@extensions{.eps,.ps}
+% \end{macrocode}
+%
+% \begin{macrocode}
+\@namedef{Gin@rule@.ps}#1{{eps}{.ps}{#1}}
+\@namedef{Gin@rule@.eps}#1{{eps}{.eps}{#1}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+\@namedef{Gin@rule@*}#1{{eps}{\Gin@ext}{#1}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+%</psrules>
+%<*psrulesZ>
+% \end{macrocode}
+%
+% \begin{macrocode}
+\def\Gin@extensions{.eps,.ps,.eps.gz,.ps.gz,.eps.Z}
+% \end{macrocode}
+%
+% \begin{macrocode}
+\@namedef{Gin@rule@.ps}#1{{eps}{.ps}{#1}}
+\@namedef{Gin@rule@.eps}#1{{eps}{.eps}{#1}}
+\@namedef{Gin@rule@.pz}#1{{eps}{.bb}{`gunzip -c #1}}
+\@namedef{Gin@rule@.eps.Z}#1{{eps}{.eps.bb}{`gunzip -c #1}}
+\@namedef{Gin@rule@.ps.Z}#1{{eps}{.ps.bb}{`gunzip -c #1}}
+\@namedef{Gin@rule@.ps.gz}#1{{eps}{.ps.bb}{`gunzip -c #1}}
+\@namedef{Gin@rule@.eps.gz}#1{{eps}{.eps.bb}{`gunzip -c #1}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+\@namedef{Gin@rule@*}#1{{eps}{\Gin@ext}{#1}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+%</psrulesZ>
+%<*dosrules>
+% \end{macrocode}
+%
+% \begin{macrocode}
+%<!psrulesZ>\def\Gin@extensions{.eps,.ps,.pcx,.bmp}
+% \end{macrocode}
+%
+% \begin{macrocode}
+\@namedef{Gin@rule@.pcx}#1{{bmp}{}{#1}}
+\@namedef{Gin@rule@.bmp}#1{{bmp}{}{#1}}
+\@namedef{Gin@rule@.msp}#1{{bmp}{}{#1}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+%</dosrules>
+%<*macrules>
+%\def\Gin@extensions{{},.ps,.eps,.pict}
+%\@namedef{Gin@rule@.ps}#1{{eps}{.ps}{#1}}
+%\@namedef{Gin@rule@.eps}#1{{eps}{.eps}{#1}}
+\@namedef{Gin@rule@.pict}#1{{pict}{}{#1}}
+\@namedef{Gin@rule@.pntg}#1{{pntg}{}{#1}}
+%\@namedef{Gin@rule@}#1{{pict}{\relax}{#1}}
+%</macrules>
+%<*tiffrules>
+\@namedef{Gin@rule@.tif}#1{{tiff}{}{#1}}
+%</tiffrules>
+% \end{macrocode}
+%
+% \Finale
+%
diff --git a/Master/texmf-dist/source/latex/graphics/epsfig.dtx b/Master/texmf-dist/source/latex/graphics/epsfig.dtx
new file mode 100644
index 00000000000..abd37b593d8
--- /dev/null
+++ b/Master/texmf-dist/source/latex/graphics/epsfig.dtx
@@ -0,0 +1,141 @@
+%
+% \iffalse
+%
+%% epsfig.dtx Copyright (C) 1994-1996 1999 Sebastian Rahtz
+%%
+%% This file is part of the Standard LaTeX `Graphics Bundle'.
+%% It may be distributed under the terms of the LaTeX Project Public
+%% License, as described in lppl.txt in the base LaTeX distribution.
+%% Either version 1.0 or, at your option, any later version.
+%%
+%<*dtx>
+ \ProvidesFile{epsfig.dtx}
+%</dtx>
+%<package>\NeedsTeXFormat{LaTeX2e}[1994/06/01]
+%<package>\ProvidesPackage{epsfig}
+%<driver> \ProvidesFile{epsfig.drv}
+% \fi
+% \ProvidesFile{epsfig.dtx}
+ [1999/02/16 v1.7a (e)psfig emulation (SPQR)]
+%
+% \iffalse
+%<*driver>
+\documentclass{ltxdoc}
+\begin{document}
+ \DocInput{epsfig.dtx}
+\end{document}
+%</driver>
+% \fi
+%
+% \GetFileInfo{epsfig.dtx}
+%
+% \title{The \textsf{epsfig} package\thanks{This file
+% has version number \fileversion, last
+% revised \filedate.}}
+% \author{Sebastian Rahtz\\spqr@ftp.tex.ac.uk}
+% \date{\filedate}
+% \maketitle
+%
+% \CheckSum{176}
+%
+% \StopEventually{}
+%
+% \section{Preface}
+% \begin{macrocode}
+%<*package>
+\DeclareOption*{\PassOptionsToPackage{\CurrentOption}{graphicx}}
+\ProcessOptions
+\RequirePackage{graphicx}
+% \end{macrocode}
+% \subsection{Emulation of `psfig' syntax}
+% Emulate "epsfig.sty", and most varieties of psfig
+% \begin{macro}{\psfig,\epsfig}
+% \begin{macrocode}
+\def\psfig#1{%
+ \let\Gin@ewidth\Gin@exclamation\let\Gin@eheight\Gin@ewidth
+ \def\Gin@req@sizes{%
+ \def\Gin@scalex{1}\let\Gin@scaley\Gin@exclamation
+ \Gin@req@height\Gin@nat@height
+ \Gin@req@width\Gin@nat@width}%
+ \begingroup
+ \let\Gfigname\relax
+ \@tempswafalse
+ \toks@{\Ginclude@graphics{\Gfigname}}%
+ \setkeys{Gin}{#1}%
+ \Gin@esetsize
+ \ifx\Gfigname\relax\ErrorNoFile\else
+ \the\toks@
+ \fi
+ \endgroup}
+\define@key{Gin}{figure}{\def\Gfigname{#1}}
+\define@key{Gin}{file}{\def\Gfigname{#1}}
+\define@key{Gin}{prolog}{\typeout{epsfig: header files are not needed}}
+\define@key{Gin}{silent}[]{}
+\def\psdraft{\Gin@drafttrue}
+\def\psfull{\Gin@draftfalse}
+\def\pssilent{\typeout{epsfig option `silent' ignored}}
+\def\psnoisy{\typeout{epsfig option `noisy' ignored}}
+\let\epsfig\psfig
+\def\psfigdriver#1{\makeatletter\input{#1.def}\makeatother}
+% \end{macrocode}
+% \end{macro}
+% \subsection{Emulation of `epsf' syntax}
+% Emulate Rokicki's "epsf.tex" supplied with the ever-popular dvips.
+% \begin{macro}{\epsfbox,\epsffile}
+% \begin{macrocode}
+\newdimen\epsfxsize
+\newdimen\epsfysize
+\epsfysize\z@
+\epsfxsize\z@
+\def\epsfsize#1#2{\epsfxsize}
+\def\epsfbox{%
+ \@ifnextchar[%
+ {\Gin@bboxtrue\epsf@bb@box}%
+ {\Gin@bboxfalse\epsf@box}%
+}
+\def\epsf@bb@box[#1#2]{%
+ \expandafter\Gread@parse@bb#1#2 \\
+ \epsf@box}
+\def\epsf@box#1{%
+ \bgroup
+ \def\Gin@req@sizes{%
+ \epsfxsize\epsfsize{\Gin@nat@width}{\Gin@nat@height}%
+ \ifdim\epsfxsize=\z@
+ \ifdim\epsfysize=\z@
+ \Gin@req@height\Gin@nat@height
+ \Gin@req@width\Gin@nat@width
+ \else
+ \let\Gin@scalex\Gin@exclamation
+ \Gin@req@height\epsfysize
+ \Gscale@div\Gin@scaley\Gin@req@height\Gin@nat@height
+ \Gin@req@width\Gin@scaley\Gin@nat@width
+ \fi
+ \else
+ \Gin@req@width\epsfxsize
+ \Gscale@div\Gin@scalex\Gin@req@width\Gin@nat@width
+ \ifdim\epsfysize=\z@
+ \let\Gin@scaley\Gin@exclamation
+ \Gin@req@height\Gin@scalex\Gin@nat@height
+ \else
+ \Gin@req@height\epsfysize
+ \Gscale@div\Gin@scaley\Gin@req@height\Gin@nat@height
+ \fi
+ \fi
+ }%
+ \Ginclude@graphics{#1}%
+ \egroup
+ \epsfysize\z@
+ \epsfxsize\z@
+}
+\let\epsffile\epsfbox
+\def\epsfclipon{\Gin@cliptrue}
+\def\epsfclipoff{\Gin@clipfalse}
+\def\epsfverbosetrue{\typeout{epsf verbose option ignored}}
+\def\epsfverbosefalse{\typeout{epsf verbose option ignored}}
+%</package>
+% \end{macrocode}
+% \end{macro}
+%
+% \Finale
+%
+
diff --git a/Master/texmf-dist/source/latex/graphics/graphics.dtx b/Master/texmf-dist/source/latex/graphics/graphics.dtx
new file mode 100644
index 00000000000..91c16e9141a
--- /dev/null
+++ b/Master/texmf-dist/source/latex/graphics/graphics.dtx
@@ -0,0 +1,1782 @@
+%
+% \iffalse
+%
+%% graphics.dtx Copyright (C) 1994 David Carlisle Sebastian Rahtz
+%% Copyright (C) 1995--1999 2001 David Carlisle
+%%
+%% This file is part of the Standard LaTeX `Graphics Bundle'.
+%% It may be distributed under the terms of the LaTeX Project Public
+%% License, as described in lppl.txt in the base LaTeX distribution.
+%% Either version 1.0 or, at your option, any later version.
+%%
+%<*dtx>
+ \ProvidesFile{graphics.dtx}
+%</dtx>
+%<package>\NeedsTeXFormat{LaTeX2e}[1995/12/01]
+%<package>\ProvidesPackage{graphics}
+%<driver> \ProvidesFile{graphics.drv}
+% \fi
+% \ProvidesFile{graphics.dtx}
+ [2001/07/07 v1.0n Standard LaTeX Graphics (DPC,SPQR)]
+%
+% \iffalse
+%<*driver>
+\documentclass{ltxdoc}
+\newenvironment{option}[1]{\expandafter\macro\expandafter{%
+ \csname ds@#1\endcsname}}{\endmacro}
+\begin{document}
+ \DocInput{graphics.dtx}
+\end{document}
+%</driver>
+% \fi
+%
+% \GetFileInfo{graphics.dtx}
+%
+% \title{The \textsf{graphics} package\thanks{This file
+% has version number \fileversion, last
+% revised \filedate.}}
+% \author{D. P. Carlisle\and S. P. Q. Rahtz}
+% \date{\filedate}
+% \maketitle
+%
+% \CheckSum{1158}
+%
+% \changes{v0.3a}{1994/02/24}
+% {First DPC version (after prototype by SPQR).}
+% \changes{v0.4e}{1994/05/30}
+% {Rename egraphics to graphicx}
+% \changes{v1.0}{1996/05/29}
+% {Version 1 at last}
+%
+%
+% \def\star{{\ttfamily*}}
+% \makeatletter
+% \def\Describe@Macro#1{\endgroup
+% \setbox0=\lastbox\llap{\PrintDescribeMacro{#1}}}%
+% \makeatother
+% \marginparsep0pt
+%
+% \section{Introduction}
+%
+% This package implements various `graphics' functions. The main
+% features are a) inclusion of `graphics' files. b) Rotation of sections
+% of the page, c) Scaling of sections of the page.
+%
+% The design is split into three `levels'.
+% \begin{itemize}
+% \item The user interface. This is the collection of commands designed
+% to appear in a document text. Actually two separate user interface
+% have been implemented. The `standard' interface, described here, and a
+% more powerful, and more `user-friendly' interface provided by the
+% |graphicx| package.
+% \item The core functions. These functions, which are also implemented
+% in this file do all the `main work'. The `user-interface functions
+% just collect together the information from any optional-arguments or
+% star-forms, and then call one of these functions.
+% \item The driver files. It is not possible to achieve the
+% functionality of this package just using \TeX. The |dvi| driver used
+% must be given additional instructions. (Using the |\special| command
+% of \TeX.) Unfortunately, the capabilities of various drivers differ,
+% and the syntax required to pass instructions to the drivers is also
+% not standardised. So the `core functions' never access |\special|
+% directly, but rather call a series of commands that must be defined in
+% a special file customised for each driver. The accompanying file,
+% |drivers.dtx| has suitable files for a range of popular drivers.
+% \end{itemize}
+%
+% \section{Package Options}
+% Most of the options, such as |dvips|, |textures| etc., specify the
+% driver that is to be used to print the document. You may wish to set
+% up a configuration file so that this option always takes effect, even
+% if not specified in the document. To do this, produce a file
+% |graphics.cfg| containing the line:\\
+% |\ExecuteOptions{dvips}|\\
+% (or whichever other driver you wish.)
+%
+% Apart from the driver options there are a few other options to control
+% the behaviour of the package.
+% \begin{description}
+% \item[draft]
+% Do not include graphics files, but instead print a box of the size
+% the graphic would take up, and the file name. This greatly speeds up
+% previewing on most systems.
+% \item[final]
+% Turns off the |draft| option.
+% \item[debugshow]
+% Show a lot of tracing information on the terminal. If you are not me
+% you probably do not want to use this option.
+% \item[hiderotate]
+% Do not show rotated text. Sometimes useful if your previewer can not
+% rotate text.
+% \item[hidescale]
+% Do not show scaled text.
+% \item[hiresbb]
+% Look for Bounding Box lines of the form |%%HiResBoundingBox| instead
+% of the standard |%%BoundingBox|. These are used by some applications
+% to get round the restriction that BoundingBox comments should only
+% have integer values.
+% \end{description}
+%
+% \section{Standard Interface}
+%
+% \subsection{Graphics Inclusion}
+%
+% \DescribeMacro
+% \includegraphics\star\oarg{llx,lly}\oarg{urx,ury}\marg{file}\\
+% Include a graphics file.
+%
+% If \star\ is present, then the graphic is `clipped' to the size
+% specified. If \star\ is omitted, then any part of the graphic that is
+% outside the specified `bounding box' will over-print the surrounding
+% text.
+%
+% If the optional arguments are omitted, then the size of the graphic
+% will be determined by reading an external file as described below.
+% If \oarg{urx,ury} is present, then it should specify the coordinates
+% of the top right corner of the image, as a pair of \TeX\ dimensions.
+% If the units are ommited they default to |bp|. So |[1in,1in]| and
+% |[72,72]| are equivalent. If only one optional argument appears, the
+% lower left corner of the image is assumed to be at |[0,0]|. Otherwise
+% \oarg{llx,lly} may be used to specify the cordinates of this point.
+%
+% \DescribeMacro
+% \graphicspath\marg{dir-list}\\
+% This optional declaration may be used to specify a list of directories
+% in which to search for graphics files. The format is as for the
+% \LaTeXe\ primitive |\input@path|, a list of directories, each in a
+% |{}| group (even if there is only one in the list). For example:
+% |\graphicspath{{eps/}{tiff/}}|
+% would cause the system to look in the subdirectories |eps| and |tiff|
+% of the current directory. The default setting of this path is
+% |\input@path| that is: graphics files will be found wherever \TeX\
+% files are found.
+%
+% \DescribeMacro
+% \DeclareGraphicsExtensions\marg{ext-list}\\
+% This specifies the behaviour of the system when the argument to
+% |\includegraphics| does not have an extension specified.
+% Here \marg{ext-list} should be a comma-separated list of file
+% extensions, each with a leading period (\texttt{.}).
+% A file name is produced by appending \emph{sep} and one extension.
+% If a file is found, the system acts as if that extension had been
+% specified. If not, the next extension in \emph{ext-list} is tried.
+% \changes{v1.0m}{2001/06/07}{Extended documentation (CAR) graphics/3228}
+%
+% Each use of |\DeclareGraphicsExtensions| overwrites all previous
+% definitions. It is not possible to add an extension to an
+% existing list.
+%
+% Early versions of this package defined a default argument for this
+% command. This has been removed.
+%
+% \DescribeMacro
+% \DeclareGraphicsRule
+% \marg{ext}\marg{type}\marg{read-file}\marg{command}\\
+% Any number of these declarations can be made. They determine how the
+% system behaves when a file with extension \emph{ext} is specified.
+% (The extension may be specified explicitly or, if the argument to
+% |\includegraphics| does not have an extension, it may be a default
+% extension from the \emph{ext-list} specified with
+% |\DeclareGraphicsExtensions|.)
+%
+% \emph{ext} is the \emph{extension} of the file. Any file with this
+% extension will be processed by this graphics rule. Normally a file
+% with an extension for which no rule has been declared will generate an
+% error, however you may use |*| as the extension to define a
+% \emph{default rule}. For instance the |dvips| driver file declares all
+% files to be of type |eps| unless a more specific rule is declared.
+%
+% Since Version v0.6, extensions should be specified including the |.|
+% that is, |.eps| not |eps|.
+%
+% \emph{type} is the `type' of file involved. All files of the same type
+% will be input with the same internal command (which must be defined in
+% a `driver file'). For example files with extensions |ps|, |eps|,
+% |ps.gz| may all be classed as type |eps|.
+%
+% \emph{read-file} determines the extension of the file that should be
+% read to determine size information. It may be the same as \emph{ext}
+% but it may be different, for example |.ps.gz| files are not readable
+% easily by \TeX, so you may want to put the bounding box information in
+% a separate file with extension |.ps.bb|. If \emph{read-file} is empty,
+% |{}|, then the system will not try to locate an external file for size
+% info, and the size must be specified in the arguments of
+% |\includegraphics|. As a special case |*| may be used to denote the
+% same extension as the graphic file. This is mainly of use in
+% conjuction with using |*| as the extension, as in that case the
+% particular graphic extension is not known. For example
+%\begin{verbatim}
+% \DeclareGraphicsRule{*}{eps}{*}{}
+%\end{verbatim}
+% This would declare a default rule, such that all unknown extensions
+% would be treated as EPS files, and the graphic file would be read for
+% a BoundingBox comment.
+%
+% If the driver file specifies a procedure for
+% reading size files for \emph{type}, that will be used, otherwise the
+% procedure for reading |eps| files will be used. Thus the size of
+% bitmap files may be specified in a file with a PostScript style
+% |%%BoundingBox| line, if no other specific format is available.
+%
+% \emph{command} is usually empty, but if non empty it is used in place
+% of the filename in the |\special|. Within this argument, |#1| may be
+% used to denote the filename. Thus using the dvips driver, one may
+% use\\
+% |\DeclareGrahicsRule{.ps.gz}{eps}{.ps.bb}{`zcat #1}|\\
+% the final argument causes dvips to use the |zcat| command to unzip the
+% file before inserting it into the PostScript output.
+%
+% \subsection{Rotation}
+%
+% \DescribeMacro
+% \rotatebox\marg{angle}\marg{text}\\
+% Rotate \emph{text} \emph{angle} degrees anti-clockwise. Normally
+% the rotation is about the left-hand end of the baseline of
+% \emph{text}.
+%
+% \subsection{Scaling}
+%
+% \DescribeMacro
+% \scalebox\marg{h-scale}\oarg{v-scale}\marg{text}\\
+% Scale \emph{text} by the specified amounts. If \emph{v-scale} is
+% omitted, the vertical scale factor is the same as the horizontal one.
+%
+% \DescribeMacro
+% \resizebox\star\marg{h-length}\marg{v-length}\marg{text}\\
+% Scale \emph{text} so that the width is \emph{h-length}.
+% If |!| is used as either length argument, the other argument is used
+% to determine a scale factor that is used in both directions.
+% Normally \emph{v-length} refers to the height of the box, but in the
+% star form, it refers to the `height + depth'.
+% As normal for \LaTeXe\ box length arguments, |\height|,
+% |\width|, |\totalheight| and |\depth| may be used to refer to the
+% original size of the box.
+%
+% \section{The Key=Value Interface}
+% As mentioned in the introduction, apart from the above `standard
+% interface', there is an alternative syntax to the |\includegraphics|
+% and |\rotatebox| commands that some people may prefer. It is provided
+% by the accompanying |graphicx| package.
+%
+% \StopEventually{}
+%
+% \section{The Graphics Kernel Functions}
+%
+% \subsection{Graphics Inclusion}
+%
+% \DescribeMacro
+% {\Ginclude@graphics}\marg{file}\\
+% Insert the contents of the file \emph{file} at the current point.
+% |\Ginclude@graphics| may use the four macros |\Gin@llx|, |\Gin@lly|,
+% |\Gin@urx|, |\Gin@ury| to determine the `bounding box' of the graphic.
+% The result will be a \TeX\ box of width $\mathit{urx}-\mathit{llx}$
+% and height $\mathit{ury}-\mathit{lly}$. If |\Gin@clip| is \meta{true}
+% then part of the graphic that is outside this box should not be
+% displayed. (Not all drivers can support this `clipping'.) Normally all
+% these parameters are set by the `user interface level'.
+%
+%
+% \DescribeMacro
+% {\Gread@eps}\marg{file}\\
+% For each \emph{type} of graphics file supported, the driver file must
+% define |\Ginclude@|\emph{type} and, optionally |\Gread@|\emph{type}.
+% The read command is responsible for obtaining size information from
+% the file specified in the |\DeclareGraphicsRule| command. However the
+% kernel defines a function, |\Gread@eps|, which can read PostScript
+% files to find the
+% |%%BoundingBox| comment. This function will be used for any type for
+% which a specific function has not been declared. |\Gread@eps| accepts
+% a generalised version of the bounding box comment. \TeX\ units may be
+% used (but there must be no space before the unit). If the unit is
+% omitted |bp| is assumed. So\\
+% |%%BoundingBox 0 0 2in 3in|\\
+% Would be accepted by this function, to produce a 2in wide, by 3in high
+% graphic.
+%
+% \subsection{Rotation}
+%
+% \DescribeMacro
+% {\Grot@box}\\
+% Rotate the contents of |\box0| through |\Grot@angle| degrees
+% (anti-clockwise). The user-interface is responsible for setting the
+% macro |\Grot@angle|, and putting the appropriate text in |\Grot@box|.
+%
+% \subsection{Scaling}
+%
+% \DescribeMacro
+% {\Gscale@box}\marg{xscale}\oarg{yscale}\marg{text}\\
+% (The second argument is not optional.)
+% Scale \emph{text} by the appropriate scale factors.
+%
+% \DescribeMacro
+% {\Gscale@box@dd}\marg{dima}\marg{dimb}\marg{text}\\
+% Scale \emph{text} in both directions by a factor
+% \emph{dima}/\emph{dimb}.
+%
+% \DescribeMacro
+% {\Gscale@box@dddd}
+% \marg{dima}\marg{dimb}\marg{dimc}\marg{dimd}\marg{text}\\
+% Scale \emph{text} in horizontally by a factor \emph{dima}/\emph{dimb},
+% and vertically by a factor of \emph{dimc}/\emph{dimd}.
+%
+% \DescribeMacro
+% {\Gscale@div}\marg{cmd}\marg{dima}\marg{dimb}\\
+% Define the macro \emph{cmd} to be the ratio of the lengths
+% \emph{dima}/\emph{dimb}.
+%
+%
+% \section{Interface to the Driver Files}
+%
+% \subsection{Graphics Inclusion}
+%
+% Each driver file must declare that its driver can include graphics of
+% certain \emph{types}. It does this by declaring for each type a
+% command of the form:\\
+% |\Ginclude@|\emph{type}\\
+% The Graphics kernel function will call this driver-defined function
+% with the filename as argument, and certain additional information will
+% be provided as follows.:
+%
+% \noindent\begin{tabular}{p{.4\textwidth}p{.5\textwidth}}
+% |\Gin@llx|, |\Gin@lly|,\newline
+% |\Gin@urx|, |\Gin@ury| &Macros storing the `bounding box'\\
+% |\Gin@nat@width|\newline |\Gin@nat@height| &
+% Registers storing the natural size.\\
+% |\Gin@req@width|\newline |\Gin@req@height| &
+% Registers storing the required size, after scaling.\\
+% |\Gin@scalex|, |\Gin@scaley| & macros with the scale factors. A value
+% of |!| means: Scale by the same amount as the other direction.\\
+% |\ifGin@clip| & |\newif| token, true if the graphic should be
+% `clipped' to the bounding box.
+% \end{tabular}
+%
+% Optionally the driver may define a command of the form:\\
+% |\Gread@|\emph{type}\\
+% This is responsible for reading an external file to find the bounding
+% box information. If such a command is not declared, but a read-file is
+% specified the command |\Gread@eps|, which is defined in the Graphics
+% Kernel will be used.
+%
+% \subsection{Literal Postscript}
+% Drivers that are producing PostScript output may want to define
+% the following macros. They each take one argument which should be
+% passed to an appropriate special. They are not used directly by this
+% package but allow other packages to use the standard configuration
+% file and package options to customise to various drivers:\\
+% |\Gin@PS@raw|, Literal PostScript special.\\
+% |\Gin@PS@restored|, Literal PostScript special, the driver will
+% surround this with a save-restore pair.\\
+% |\Gin@PS@literal@header|, Postscript to be inserted in the header
+% section of the PostScript file.\\
+% |\Gin@PS@file@header|, external file to be inserted in the header
+% section of the PostScript file.
+%
+%
+% \subsection{Rotation}
+%
+% |\Grot@start|, |\Grot@end| These macros must be defined to insert the
+% appropriate |\special| to rotate the text between them by
+% |\Grot@angle| degrees. The kernel function will make sure that the
+% correct \TeX\ spacing is produced, these functions only need insert
+% the |\special|.
+%
+% \subsection{Scaling}
+%
+% |\Gscale@start|, |\Gscale@end|, as for rotation, but here scale the
+% text by |\Gscale@x| and |\Gscale@y|.
+%
+%
+% \section{Implementation}
+%
+% \begin{macrocode}
+%<*package>
+% \end{macrocode}
+%
+% \subsection{Initialisation}
+%
+% \begin{macro}{\Gin@codes}
+% First we save the catcodes of some characters, and set them to
+% fixed values whilst this file is being read.
+% \changes{v0.5a}{1994/07/20}
+% {Save and restore catcodes}
+% \begin{macrocode}
+\edef\Gin@codes{%
+ \catcode`\noexpand\^^A\the\catcode`\^^A\relax
+ \catcode`\noexpand\"\the\catcode`\"\relax
+ \catcode`\noexpand\*\the\catcode`\*\relax
+ \catcode`\noexpand\!\the\catcode`\!\relax
+ \catcode`\noexpand\:\the\catcode`\:\relax}
+% \end{macrocode}
+%
+% \begin{macrocode}
+\catcode`\^^A=\catcode`\%
+\@makeother\"%
+\catcode`\*=11
+\@makeother\!%
+\@makeother\:%
+% \end{macrocode}
+% \end{macro}
+%
+% We will need to have an implementation of the trigonometric
+% functions for the rotation feature. May as well load it now.
+% \begin{macrocode}
+\RequirePackage{trig}
+% \end{macrocode}
+%
+% \begin{macro}{\Grot@start}
+% \begin{macro}{\Grot@end}
+% Initialise the rotation primitives.
+% \begin{macrocode}
+\providecommand\Grot@start{\@latex@error{Rotation not supported}\@ehc
+ \global\let\Grot@start\relax}
+\providecommand\Grot@end{}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\Gscale@start}
+% \begin{macro}{\Gscale@end}
+% Initialise the scaling primitives.
+% \begin{macrocode}
+\providecommand\Gscale@start{\@latex@error{Scaling not supported}\@ehc
+ \global\let\Gscale@start\relax}
+\providecommand\Gscale@end{}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\Gread@BBox}
+% \changes{v1.0b}{1996/10/29}
+% {Moved to initial section, for hiresbb option}
+% |%%BoundingBox| as a macro for testing with |\ifx|.
+% This may be redefined by the hiresbb option.
+% \begin{macrocode}
+\edef\Gread@BBox{\@percentchar\@percentchar BoundingBox}
+% \end{macrocode}
+% \end{macro}
+%
+% \subsection{Options}
+%
+% \begin{option}{draft}
+% \begin{option}{final}
+% \changes{v0.3i}{1994/03/23}
+% {notdraft option added}
+% \changes{v0.4a}{1994/04/13}
+% {Rename option to nodraft}
+% \changes{v0.4d}{1994/05/06}
+% {Rename option to final}
+% \begin{macrocode}
+\DeclareOption{draft}{\Gin@drafttrue}
+\DeclareOption{final}{\Gin@draftfalse}
+% \end{macrocode}
+% \end{option}
+% \end{option}
+%
+% \begin{macro}{\ifGin@draft}
+% True in draft mode.
+% \begin{macrocode}
+\newif\ifGin@draft
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{option}{hiresbb}
+% \changes{v1.0b}{1996/10/29}
+% {hiresbb option added}
+% If given this option the package will look for bounding box comments
+% of the form |%%HiResBoundingBox| (which typically have real values)
+% instead of the standard |%%BoundingBox| (which should have integer
+% values).
+% \begin{macrocode}
+\DeclareOption{hiresbb}{%
+ \edef\Gread@BBox{\@percentchar\@percentchar HiResBoundingBox}}
+% \end{macrocode}
+% \end{option}
+%
+% \begin{macro}{\Gin@driver}
+% Driver in use.
+% \begin{macrocode}
+\providecommand\Gin@driver{}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{option}{dvips}
+% \changes{v0.3g}{1994/03/15}
+% {Use dvips def file not development version}
+% \begin{option}{xdvi}
+% Tomas Rockiki's PostScript driver (unix, MSDOS, VMS\ldots).
+% The |X11| previewer |xdvi| supports basically the same set of
+% |\specials|.
+% \begin{macrocode}
+\DeclareOption{dvips}{\def\Gin@driver{dvips.def}}
+\DeclareOption{xdvi}{\ExecuteOptions{dvips}}
+% \end{macrocode}
+% \end{option}
+% \end{option}
+%
+% \begin{option}{dvipdf}
+% \changes{v1.0c}{1996/10/31}
+% {dvipdf added}
+% Sergey Lesenko's dvipdf driver.
+% \begin{macrocode}
+\DeclareOption{dvipdf}{\def\Gin@driver{dvipdf.def}}
+% \end{macrocode}
+% \end{option}
+%
+% \begin{option}{dvipdfm}
+% \changes{v1.0k}{1999/01/13}
+% {dvipdfm added}
+% Mark Wick's dvipdfm driver.
+% \begin{macrocode}
+\DeclareOption{dvipdfm}{\def\Gin@driver{dvipdfm.def}}
+% \end{macrocode}
+% \end{option}
+%
+% \begin{option}{pdftex}
+% \changes{v1.0d}{1997/06/07}
+% {pdftex added}
+% Han The Thanh's \TeX\ variant.
+% \begin{macrocode}
+\DeclareOption{pdftex}{\def\Gin@driver{pdftex.def}}
+% \end{macrocode}
+% \end{option}
+%
+% \begin{option}{dvipsone}
+% \begin{option}{dviwindo}
+% \changes{v0.3c}{1994/03/04}
+% {dviwindo support.}
+% \changes{v0.7c}{1995/09/07}
+% {Merge dviwindo option with dvipsone}
+% The drivers for the Y\&Y \TeX\ system.
+% \begin{macrocode}
+\DeclareOption{dvipsone}{\def\Gin@driver{dvipsone.def}}
+\DeclareOption{dviwindo}{\ExecuteOptions{dvipsone}}
+% \end{macrocode}
+% \end{option}
+% \end{option}
+%
+% \begin{option}{emtex}
+% \begin{option}{dviwin}
+% Two freely available sets of drivers for MSDOS, OS/2 and Windows.
+% \begin{macrocode}
+\DeclareOption{emtex}{\def\Gin@driver{emtex.def}}
+\DeclareOption{dviwin}{\def\Gin@driver{dviwin.def}}
+% \end{macrocode}
+% \end{option}
+% \end{option}
+%
+% \begin{option}{oztex}
+% \changes{v1.0f}{1997/09/09}
+% {Merge dvips and oztex options}
+% Oz\TeX\ (Macintosh).
+% Since release 3 of Oz\TeX, merge with dvips back end.
+% \begin{macrocode}
+\DeclareOption{oztex}{\ExecuteOptions{dvips}}
+% \end{macrocode}
+% \end{option}
+%
+% \begin{option}{textures}
+% Textures (Macintosh).
+% \begin{macrocode}
+\DeclareOption{textures}{\def\Gin@driver{textures.def}}
+% \end{macrocode}
+% \end{option}
+%
+% \begin{option}{pctexps}
+% \begin{option}{pctexwin}
+% \begin{option}{pctexhp}
+% \begin{option}{pctex32}
+% \changes{v1.0b}{1996/10/29}
+% {pctex32 option added}
+% PC\TeX\ (MSDOS/Windows) .
+% \begin{macrocode}
+\DeclareOption{pctexps}{\def\Gin@driver{pctexps.def}}
+\DeclareOption{pctexwin}{\def\Gin@driver{pctexwin.def}}
+\DeclareOption{pctexhp}{\def\Gin@driver{pctexhp.def}}
+\DeclareOption{pctex32}{\def\Gin@driver{pctex32.def}}
+% \end{macrocode}
+% \end{option}
+% \end{option}
+% \end{option}
+% \end{option}
+%
+% \begin{option}{truetex}
+% \changes{v1.0b}{1996/10/29}
+% {truetex and tcidef options added}
+% \begin{option}{tcidvi}
+% Kinch TrueTeX, and its version with extended special support as
+% shipped by Scientific Word.
+% \begin{macrocode}
+\DeclareOption{truetex}{\def\Gin@driver{truetex.def}}
+\DeclareOption{tcidvi}{\def\Gin@driver{tcidvi.def}}
+% \end{macrocode}
+% \end{option}
+% \end{option}
+%
+% \begin{option}{vtex}
+% \changes{v1.0h}{1998/05/27}
+% {vtex option added}
+% V\TeX\ driver.
+% \begin{macrocode}
+\DeclareOption{vtex}{\def\Gin@driver{vtex.def}}
+% \end{macrocode}
+% \end{option}
+%
+% \begin{option}{dvi2ps}
+% \begin{option}{dvialw}
+% \begin{option}{dvilaser}
+% \begin{option}{dvitops}
+% \begin{option}{psprint}
+% \begin{option}{pubps}
+% \begin{option}{ln}
+% \changes{v0.6b}{1994/12/12}
+% {ln support (untested)}
+% \changes{v1.0b}{1996/10/29}
+% {options for historic drivers depreciated}
+% If \emph{anyone} is using any of these driver options
+% would they let me know. All these are essentially untried
+% and untested as far as I know.
+% \begin{macrocode}
+%\DeclareOption{dvi2ps}{\def\Gin@driver{dvi2ps.def}}
+%\DeclareOption{dvialw}{\def\Gin@driver{dvialw.def}}
+%\DeclareOption{dvilaser}{\def\Gin@driver{dvilaser.def}}
+%\DeclareOption{dvitops}{\def\Gin@driver{dvitops.def}}
+%\DeclareOption{psprint}{\def\Gin@driver{psprint.def}}
+%\DeclareOption{pubps}{\def\Gin@driver{pubps.def}}
+%\DeclareOption{ln}{\def\Gin@driver{ln.def}}
+% \end{macrocode}
+% \end{option}
+% \end{option}
+% \end{option}
+% \end{option}
+% \end{option}
+% \end{option}
+% \end{option}
+%
+% \begin{option}{debugshow}
+% You probably don't want to use this\ldots
+% \begin{macrocode}
+\DeclareOption{debugshow}{\catcode`\^^A=9 \let\GDebug\typeout}
+% \end{macrocode}
+% \end{option}
+%
+% A local configuration file may define more options.
+% It should also make one driver option the default, by calling
+% |\ExecuteOptions| with the appropriate option.
+% \changes{v0.4f}{1994/07/27}
+% {Add missing 3rd argument to \cs{InputIfFileExists}}
+% \begin{macrocode}
+\InputIfFileExists{graphics.cfg}{}{}
+% \end{macrocode}
+%
+% \begin{option}{hiderotate}
+% \changes{v0.4a}{1994/04/13}
+% {Rename option to hiderotate}
+% \begin{macrocode}
+\DeclareOption{hiderotate}{%
+ \def\Grot@start{\begingroup\setbox\z@\hbox\bgroup}
+ \def\Grot@end{\egroup\endgroup}}
+% \end{macrocode}
+% \end{option}
+%
+% \begin{option}{hidescale}
+% \changes{v0.4a}{1994/04/13}
+% {Rename option to hidescale}
+% \begin{macrocode}
+\DeclareOption{hidescale}{%
+ \def\Gscale@start{\begingroup\setbox\z@\hbox\bgroup}
+ \def\Gscale@end{\egroup\endgroup}}
+% \end{macrocode}
+% \end{option}
+%
+% After the options are processed, load the appropriate driver file.
+% If a site wants a default driver (eg |textures|) it just needs to put
+% |\ExecuteOptions{textures}| in a |graphics.cfg| file.
+% \begin{macrocode}
+\ProcessOptions
+% \end{macrocode}
+%
+% Check that a driver has been specified (either as an option, or as a
+% default option in the configuration file). Then load the `def' file
+% for that option, if it has not already been loaded by some other
+% package (for instance the \textsf{color} package).
+% \changes{v0.5c}{1994/10/03}
+% {Error if no driver specified}
+% \begin{macrocode}
+\if!\Gin@driver!
+ \PackageError{graphics}
+ {No driver specified}
+ {You should make a default driver option in a file \MessageBreak
+ graphics.cfg\MessageBreak
+ eg: \protect\ExecuteOptions{textures}%
+ }
+\else
+ \PackageInfo{graphics}{Driver file: \Gin@driver}
+ \@ifundefined{ver@\Gin@driver}{\input{\Gin@driver}}{}
+\fi
+% \end{macrocode}
+%
+%
+% \subsection{Graphics Inclusion}
+%
+% This Graphics package uses a lot of dimension registers. \TeX\ only
+% has a limited number of registers, so rather than allocate new ones,
+% re-use some existing \LaTeX\ registers. This is safe as long as all
+% uses of the registers are \emph{local}, and that you can be sure
+% that you \emph{never} need to have access to both uses within the
+% same scope.
+%
+% \begin{macro}{\Gin@llx}
+% \begin{macro}{\Gin@lly}
+% \begin{macro}{\Gin@urx}
+% \begin{macro}{\Gin@ury}
+% In fact these four lengths are now stored as macros not as dimen
+% registers, mainly so that integer |bp| lengths may be passed exactly.
+% \changes{v0.7a}{1995/04/11}
+% {Bounding box coords no longer in registers}
+% \begin{macrocode}
+\def\Gin@llx{0}
+\let\Gin@lly\Gin@llx
+\let\Gin@urx\Gin@llx
+\let\Gin@ury\Gin@llx
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\Gin@nat@width}
+% \begin{macro}{\Gin@nat@height}
+% The `natural' size of the graphic, before any scaling.
+% \begin{macrocode}
+\let\Gin@nat@width\leftmarginv
+\let\Gin@nat@height\leftmarginvi
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\ifGin@clip}
+% This switch is \meta{true} if any graphics outside the specified
+% bounding box (really viewport) should not be printed.
+% \begin{macrocode}
+\newif\ifGin@clip
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\DeclareGraphicsExtensions}
+% \changes{v0.6a}{1994/11/29}
+% {Remove optional argument, ignore spaces in main argument.}
+% Declare a comma separated list of default extensions to be used
+% if the file is specified with no extension.
+% \begin{macrocode}
+\newcommand\DeclareGraphicsExtensions[1]{%
+ \edef\Gin@extensions{\zap@space#1 \@empty}}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Gin@extensions}
+% Initialise the list of possible extensions.
+% \changes{v0.4b}{1994/04/20}
+% {Use \cmd{\providecommand} in case a previous def file has
+% already defined it}
+% \begin{macrocode}
+\providecommand\Gin@extensions{}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\includegraphics}
+% Top level command for the standard interface, just look for a |*|.
+% \begin{macrocode}
+\def\includegraphics{%
+ \@ifstar
+ {\Gin@cliptrue\Gin@i}%
+ {\Gin@clipfalse\Gin@i}}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Gin@i}
+% If an optional argument is present, call |\Gin@ii| to process it,
+% otherwise call |\Ginclude@graphics|.
+% \changes{v0.3e}{1994/03/09}
+% {Now specify ll before ur coordinate}
+% \begin{macrocode}
+\def\Gin@i{%
+ \@ifnextchar[%]
+ \Gin@ii
+ {\Gin@bboxfalse\Ginclude@graphics}}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Gin@ii}
+% Look for a second optional argument.
+% \begin{macrocode}
+\def\Gin@ii[#1]{%
+ \@ifnextchar[%]
+ {\Gin@iii[#1]}
+ {\Gin@iii[0,0][#1]}}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Gin@iii}
+% Set the cordinates of the {\bfseries l}lower {\bfseries l}eft corner,
+% and the cordinates of the {\bfseries u}pper {\bfseries r}ight
+% corner. The cordinates may be any \TeX\ dimension, defaulting to |bp|.
+% \changes{v0.6c}{1994/12/15}
+% {(Denis Roegel) Extra group to keep bb settings local}
+% \begin{macrocode}
+\def\Gin@iii[#1,#2][#3,#4]#5{%
+ \begingroup
+ \Gin@bboxtrue
+ \Gin@defaultbp\Gin@llx{#1}%
+ \Gin@defaultbp\Gin@lly{#2}%
+ \Gin@defaultbp\Gin@urx{#3}%
+ \Gin@defaultbp\Gin@ury{#4}%
+ \Ginclude@graphics{#5}%
+ \endgroup}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Gin@defaultbp}
+% \changes{v0.7a}{1995/04/11}{Macro added}
+% \begin{macro}{\Gin@def@bp}
+% \changes{v0.7a}{1995/04/11}{Macro added}
+% This macro grabs a length, |#2|, which may or may not have a unit,
+% and if a unit is supplied, converts to `bp' and stores the value in
+% |#1|. If a unit is not supplied `bp' is assumed, and |#2| is directly
+% stored in |#1|. Note that supplying `bp' is not quite the same as
+% supplying no units, as in the former case a convertion via `pt' and
+% back to `bp' takes place which can introduce rounding error. The error
+% is invisibly small but files conforming to Adobe DSC should have
+% \emph{integer} Bounding Box Coordinates, and conceivably some drivers
+% might demand integer values.
+% (Although most seem to accept real values (if they accept bounding box
+% coordinates at all) in the |\special|. This is the reason why the
+% mechanism uses |\def| and not \TeX\ lengths, as in earlier releases of
+% the package.
+% \begin{macrocode}
+\def\Gin@defaultbp#1#2{%
+ \afterassignment\Gin@def@bp\dimen@#2bp\relax{#1}{#2}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+\def\Gin@def@bp#1\relax#2#3{%
+ \if!#1!%
+ \def#2{#3}%
+ \else
+ \dimen@.99626\dimen@
+ \edef#2{\strip@pt\dimen@}%
+ \fi}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\DeclareGraphicsRule}
+% Declare what actions should be taken for a particular file
+% extension.
+%
+% |#1| extension, |#2| type, |#3| read-file, |#4| command,
+% \changes{v0.5d}{1994/10/24}
+% {(Arthur Ogawa) Check arg3 is *, not arg2.}
+% \begin{macrocode}
+\def\DeclareGraphicsRule#1#2#3#4{%
+ \edef\@tempa{\string *}\def\@tempb{#3}%
+ \expandafter\edef\csname Gin@rule@#1\endcsname##1%
+ {{#2}%
+ {\ifx\@tempa\@tempb\noexpand\Gin@ext\else#3\fi}%
+ {\ifx\indent#4\indent##1\else#4\fi}}}
+% \end{macrocode}
+% \end{macro}
+%
+% An example rule base.
+%\begin{verbatim}
+% ext type read command
+% \DeclareGrahicsRule{.ps} {eps} {.ps} {}
+% \DeclareGrahicsRule{.eps} {eps} {.eps} {}
+% \DeclareGrahicsRule{.ps.gz}{eps} {.ps.bb} {`zcat #1}
+% \DeclareGrahicsRule{.pcx} {bmp} {} {}
+%\end{verbatim}
+%
+% \begin{macro}{\graphicspath}
+% User level command to set the input path for graphics files.
+% A list of directories, each in a |{}| group.
+% \begin{macrocode}
+\def\graphicspath#1{\def\Ginput@path{#1}}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Ginput@path}
+% The default graphic path is |\input@path|.
+% \begin{macrocode}
+\ifx\Ginput@path\@undefined
+ \let\Ginput@path\input@path
+\fi
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Gin@getbase}
+% \changes{v0.6a}{1994/11/29}
+% {remove \cs{Gin@sep}}
+% Given a possible extension, |#1|, check whether the file exists. If
+% it does set |\Gin@base| and |\Gin@ext| to the filename stripped of
+% the extension, and the extension, respectively.
+% \begin{macrocode}
+\def\Gin@getbase#1{%
+ \edef\Gin@tempa{%
+ \def\noexpand\@tempa####1#1\space{%
+ \def\noexpand\Gin@base{####1}}}%
+ \IfFileExists{\filename@area\filename@base#1}%
+ {\Gin@tempa
+ \expandafter\@tempa\@filef@und
+ \edef\Gin@ext{#1}}{}}%
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Gin@ext}
+% Initialise the macro to hold the extension.
+% \begin{macrocode}
+\let\Gin@ext\relax
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Gin@sepdefault}
+% \changes{v0.6a}{1994/11/29}
+% {remove \cs{Gin@sep}}
+% This must match the token used by |\filename@parse| to delimit the
+% extension.
+% \begin{macrocode}
+\def\Gin@sepdefault{.}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Ginclude@graphics}
+% The main internal function implementing graphics file inclusion.
+% |#1| is the file name.
+% \changes{v0.4c}{1994/04/28}
+% {Improve the wording of error messages}
+% \changes{v0.5a}{1994/07/20}
+% {Add default (*) rule possibility}
+% \changes{v0.6a}{1994/11/29}
+% {remove \cs{Gin@sepdefault}}
+% \begin{macrocode}
+\def\Ginclude@graphics#1{%
+ \begingroup
+ \let\input@path\Ginput@path
+ \filename@parse{#1}%
+ \ifx\filename@ext\relax
+ \@for\Gin@temp:=\Gin@extensions\do{%
+ \ifx\Gin@ext\relax
+ \Gin@getbase\Gin@temp
+ \fi}%
+ \else
+ \Gin@getbase{\Gin@sepdefault\filename@ext}%
+% \end{macrocode}
+% \changes{v0.4d}{1994/05/06}
+% {Make file not found a warning not an error}
+% \changes{v0.6a}{1994/11/29}
+% {remove \cs{Gin@sep}}
+% If the user supplied an explicit extension, just give a warning if the
+% file does not exist. (It may be created later.)
+% \begin{macrocode}
+ \ifx\Gin@ext\relax
+ \@warning{File `#1' not found}%
+ \def\Gin@base{\filename@area\filename@base}%
+% \end{macrocode}
+% \changes{v0.6c}{1994/12/15}
+% {(Piet van Oostrum) include `.' in \cs{Gin@ext}}%
+% \begin{macrocode}
+ \edef\Gin@ext{\Gin@sepdefault\filename@ext}%
+ \fi
+ \fi
+% \end{macrocode}
+% If no extension is supplied, it is an error if the file does not
+% exist, as there is no way for the system to know which extension to
+% supply.
+% \begin{macrocode}
+ \ifx\Gin@ext\relax
+ \@latex@error{File `#1' not found}%
+ {I could not locate the file with any of these extensions:^^J%
+ \Gin@extensions^^J\@ehc}%
+ \else
+ \@ifundefined{Gin@rule@\Gin@ext}%
+% \end{macrocode}
+% \changes{v0.5a}{1994/07/20}
+% {Add default (*) rule possibility}
+% Handle default rule.
+% \begin{macrocode}
+ {\ifx\Gin@rule@*\@undefined
+ \@latex@error{Unknown graphics extension: \Gin@ext}\@ehc
+ \else
+ \expandafter\Gin@setfile\Gin@rule@*{\Gin@base\Gin@ext}%
+ \fi}%
+ {\expandafter\expandafter\expandafter\Gin@setfile
+ \csname Gin@rule@\Gin@ext\endcsname{\Gin@base\Gin@ext}}%
+ \fi
+ \endgroup}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\ifGread@}
+% True if a file should be read to obtain the natural size.
+% \begin{macrocode}
+\newif\ifGread@\Gread@true
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Gin@setfile}
+% Set a file to the size specified in arguments, or in a `read file'.
+% \changes{v0.5d}{1994/10/24}
+% {(Arthur Ogawa) Add missing \cs{expandafter}}
+% \begin{macrocode}
+\def\Gin@setfile#1#2#3{%
+ \ifx\\#2\\\Gread@false\fi
+ \ifGin@bbox\else
+ \ifGread@
+ \csname Gread@%
+ \expandafter\ifx\csname Gread@#1\endcsname\relax
+ eps%
+ \else
+ #1%
+ \fi
+ \endcsname{\Gin@base#2}%
+ \else
+% \end{macrocode}
+% \changes{v0.5a}{1994/07/20}
+% {New error trap for missing size arguments}
+% \changes{v0.7f}{1995/11/10}
+% {Use \cs{Gin@nosize}}
+% By now the natural size should be known either from arguments or
+% from the file. If not generate an error. (The \textsf{graphicx}
+% interface relaxes this condition slightly.)
+% \begin{macrocode}
+ \Gin@nosize{#3}%
+ \fi
+ \fi
+% \end{macrocode}
+% \changes{v0.7a}{1995/04/11}{\cs{Gin@viewport@code} added.}
+% The following call will modify the `natural size' if the user has
+% supplied a viewport or trim specification. (Not available in the
+% standard interface.)
+% \begin{macrocode}
+ \Gin@viewport@code
+% \end{macrocode}
+% Save the natural size, and then call |\Gin@req@sizes| whic (in the
+% key-val interface) will calculate the required size from the natural
+% size, and any scaling info.
+% \begin{macrocode}
+ \Gin@nat@height\Gin@ury bp%
+ \advance\Gin@nat@height-\Gin@lly bp%
+ \Gin@nat@width\Gin@urx bp%
+ \advance\Gin@nat@width-\Gin@llx bp%
+ \Gin@req@sizes
+% \end{macrocode}
+%
+% Call |\Ginclude@|\emph{type} to include the figure unless
+% this is not defined, or draft mode is being used.
+% \changes{v0.7h}{1996/02/20}
+% {missing \texttt{@} added in \texttt{Gread@} csnames}
+% \begin{macrocode}
+ \expandafter\ifx\csname Ginclude@#1\endcsname\relax
+ \Gin@drafttrue
+ \expandafter\ifx\csname Gread@#1\endcsname\relax
+ \@latex@error{Can not include graphics of type: #1}\@ehc
+ \global\expandafter\let\csname Gread@#1\endcsname\@empty
+ \fi
+ \fi
+ \leavevmode
+ \ifGin@draft
+ \hb@xt@\Gin@req@width{%
+ \vrule\hss
+ \vbox to \Gin@req@height{%
+ \hrule \@width \Gin@req@width
+ \vss
+ \edef\@tempa{#3}%
+ \rlap{ \ttfamily\expandafter\strip@prefix\meaning\@tempa}%
+ \vss
+ \hrule}%
+ \hss\vrule}%
+ \else
+% \end{macrocode}
+% \changes{v0.3i}{1994/3/23}
+% {Add file list info}
+% Support |\listfiles| and then set the final box to the required size.
+% \begin{macrocode}
+ \@addtofilelist{#3}%
+ \ProvidesFile{#3}[Graphic file (type #1)]%
+ \setbox\z@\hbox{\csname Ginclude@#1\endcsname{#3}}%
+ \dp\z@\z@
+ \ht\z@\Gin@req@height
+ \wd\z@\Gin@req@width
+ \box\z@
+ \fi}
+% \end{macrocode}
+% \end{macro}
+%
+%
+% \begin{macro}{\Gin@exclamation}
+% \changes{v0.7g}{1995/12/06}{Macro added}
+% Catcode 12 |!|, in case of French, or other language styles.
+% \begin{macrocode}
+\def\Gin@exclamation{!}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Gin@req@sizes}
+% \begin{macro}{\Gin@scalex}
+% \begin{macro}{\Gin@scaley}
+% \begin{macro}{\Gin@req@height}
+% \begin{macro}{\Gin@req@width}
+% In the standard interface there is no scaling, so the required size
+% is the same as the natural size. In other interfaces |\Gin@req@sizes|
+% will be responsible for setting these parameters. Here we can set them
+% globally.
+% \changes{v0.3g}{1994/03/15}
+% {Initialise y-scale to !!}
+% \changes{v1.0g}{1998/05/14}
+% {Fix !! usage in changes entries. graphics/2724}
+% \begin{macrocode}
+\let\Gin@req@sizes\relax
+\def\Gin@scalex{1}%
+\let\Gin@scaley\Gin@exclamation
+\let\Gin@req@height\Gin@nat@height
+\let\Gin@req@width\Gin@nat@width
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\Gin@viewport@code}
+% In the standard interface there is no possibility of specifying
+% a viewport, so this is a no-op.
+% \changes{v0.7a}{1995/04/11}{Macro added}
+% \begin{macrocode}
+\let\Gin@viewport@code\relax
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Gin@nosize}
+% \changes{v0.7f}{1995/11/10}
+% {Macro added}
+% This command is called in the case that the graphics type
+% specifies no `read file' and the user supplied no size arguments.
+% In the standard interface can only generate an error.
+% \begin{macrocode}
+\def\Gin@nosize#1{%
+ \@latex@error
+ {Cannot determine size of graphic in #1 (no size specifed)}%
+ \@ehc}
+% \end{macrocode}
+% \end{macro}
+%
+% \subsection{Reading the BoundingBox in EPS files}
+%
+% \begin{macro}{\ifGin@bbox}
+% \changes{v0.7a}{1995/04/11}{Name changed from \cs{ifGin@viewport}}
+% This switch should be set \meta{true} once a size has been found,
+% either in an argument, or in an external file.
+% \begin{macrocode}
+\newif\ifGin@bbox
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Gread@eps}
+% Read an EPS file (|#1|) and search for a line
+% starting with |%%BoundingBox| and returns the result
+% by setting four dimension registers
+% |\Gin@llx|, |\Gin@lly|, |\Gin@urx| and |\Gin@ury|.
+% \changes{v0.5e}{1994/1l/02}
+% {Fix the catcodes of \cs{endlinechar} and ctrl-D}
+% \changes{v0.7a}{1995/04/11}
+% {Fix more catcodes, for binary headers of eps files}
+% \begin{macrocode}
+\def\Gread@eps#1{%
+ \begingroup
+% \end{macrocode}
+% Make it reasonably safe to have binary headers in the EPS file
+% before the bounding box line.
+% \begin{macrocode}
+ \@tempcnta\z@
+ \loop\ifnum\@tempcnta<\@xxxii
+ \catcode\@tempcnta14 %
+ \advance\@tempcnta\@ne
+ \repeat
+ \catcode`\^^?14 %
+ \let\do\@makeother
+ \dospecials
+% \end{macrocode}
+% Make sure tab and space are accepted as white space.
+% \changes{v1.0e}{1997/09/02}
+% {Allow TAB in DSC comments graphics/2587}
+% \changes{v1.0i}{1999/01/07}
+% {Fix catcode of hyphen. graphics/2846}
+% \begin{macrocode}
+ \catcode`\ 10 %
+ \catcode`\^^I10 %
+ \catcode\endlinechar5 %
+ \@makeother\:%
+ \@makeother\-%
+% \end{macrocode}
+% The first thing we need to do is to open the
+% information file, if possible.
+% \changes{v0.4d}{1994/05/06}
+% {Improve the error message if the info file is not there.}
+% \begin{macrocode}
+ \immediate\openin\@inputcheck#1 %
+ \ifeof\@inputcheck
+ \@latex@error{File `#1' not found}\@ehc
+ \else
+% \end{macrocode}
+% Now we'll scan lines until we find one that starts with
+% |%%BoundingBox:|
+% We need to reset the catcodes to read the file, and so this
+% is done in a group.
+% \begin{macrocode}
+ \Gread@true
+ \let\@tempb\Gread@false
+ \loop
+ \read\@inputcheck to\@tempa
+ \ifeof\@inputcheck
+ \Gread@false
+ \else
+ \expandafter\Gread@find@bb\@tempa:.\\%
+ \fi
+ \ifGread@
+ \repeat
+ \immediate\closein\@inputcheck
+ \fi
+% \end{macrocode}
+% \changes{v0.3i}{1994/03/23}
+% {Wording of error message improved}
+% \changes{v1.0}{1996/05/29}
+% {Use \cs{@gtempa} not \cs{g@tempa} /2090}
+% \begin{macrocode}
+ \ifGin@bbox\else
+ \@latex@error
+ {Cannot determine size of graphic in #1 (no BoundingBox)}%
+ \@ehc
+ \gdef\@gtempa{0 0 72 72 }%
+ \fi
+ \endgroup
+ \expandafter\Gread@parse@bb\@gtempa\\}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Gread@find@bb}
+% If a line in the EPS file starts with a |%%BoundingBox:|, we
+% will examine it more closely. Note using the `extra' argument |#2#3|
+% causes any space after the |:| to be gobbled.
+% \begin{macrocode}
+\long\def\Gread@find@bb#1:#2#3\\{%
+ \def\@tempa{#1}%
+ \ifx\@tempa\Gread@BBox
+ \Gread@test@atend#2#3()\\%
+ \fi}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\Gread@test@atend}
+% Determine if the stuff following the |%%BoundingBox| is `(atend)',
+% which will involve further reading of the file. This is accomplished
+% by making |\@tempb| into a no-op, so that finding a |%%BoundingBox|
+% does not stop the loop.
+% \begin{macrocode}
+\def\Gread@test@atend#1(#2)#3\\{%
+ \def\@tempa{#2}%
+ \ifx\@tempa\Gread@atend
+ \Gread@true
+ \let\@tempb\relax
+ \else
+ \gdef\@gtempa{#1}%
+ \@tempb
+ \Gin@bboxtrue
+ \fi}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\Gread@parse@bb}
+% We have |%%BoundingBox| and what follows is not `(atend)' so we
+% will parse the rest of the line as a BB with four elements.
+% PostScript files should never have units specified in the
+% BoundingBox comment, but we allow arbitrary \TeX\ units in external
+% files, or in other interfaces.
+% \begin{macrocode}
+\def\Gread@parse@bb#1 #2 #3 #4 #5\\{%
+ \Gin@defaultbp\Gin@llx{#1}%
+ \Gin@defaultbp\Gin@lly{#2}%
+ \Gin@defaultbp\Gin@urx{#3}%
+ \Gin@defaultbp\Gin@ury{#4}}%
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Gread@atend}
+% |atend| as a macro for testing with |\ifx|.
+% \begin{macrocode}
+\def\Gread@atend{atend}
+% \end{macrocode}
+% \end{macro}
+%
+%
+% \subsection{Rotation}
+%
+% As above, we will re-use some existing local registers.
+%
+% \begin{macro}{\Grot@height}
+% \begin{macro}{\Grot@left}
+% \begin{macro}{\Grot@right}
+% \begin{macro}{\Grot@depth}
+% Final Rotated box dimensions
+% \begin{macrocode}
+\let\Grot@height\@ovxx
+\let\Grot@left\@ovyy
+\let\Grot@right\@ovdx
+\let\Grot@depth\@ovdy
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\Grot@h}
+% \begin{macro}{\Grot@l}
+% \begin{macro}{\Grot@r}
+% \begin{macro}{\Grot@d}
+% Original box dimensions
+% \begin{macrocode}
+\let\Grot@l\@ovro
+\let\Grot@r\@ovri
+\let\Grot@h\@xdim
+\let\Grot@d\@ydim
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\Grot@x}
+% \begin{macro}{\Grot@y}
+% Coordinates of centre of rotation.
+% \begin{macrocode}
+\let\Grot@x\@linelen
+\let\Grot@y\@dashdim
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\rotatebox}
+% The angle is specified by |#1|. The box to be rotated is |#2|.
+% In the standard interface the centre of rotation is $(0,0)$.
+% Then finally call |\Grot@box| to rotate the box.
+% \changes{v0.3f}{1994/03/11}{Remove star form}
+% \changes{v0.3h}{1994/03/17}{Fix Typo}
+% \changes{v0.7a}{1995/04/11}{\cs{leavevmode} added graphics/1521}
+% \changes{v1.0n}{2001/07/07}
+% {Made long (CAR) graphics/2908 and 3345}
+% \begin{macrocode}
+\long\def\rotatebox#1#2{%
+ \leavevmode
+ \Grot@setangle{#1}%
+ \setbox\z@\hbox{{#2}}%
+ \Grot@x\z@
+ \Grot@y\z@
+ \Grot@box}
+% \end{macrocode}
+% \end{macro}
+%
+%
+% \begin{macro}{\Grot@setangle}
+% Set the internal macro used by |\Grot@box|. In the standard
+% interface this is trivial, but other interfaces may have more
+% interesting definitions. For example:
+%\begin{verbatim}
+% \def\Grot@setangle#1{%
+% \dimen@#1\p@
+% \dimen@-57.2968\dimen@
+% \edef\Grot@angle{\strip@pt\dimen@}}
+%\end{verbatim}
+% This would cause the argument of |\rotatebox| to be interpreted as
+% an angle specified in \emph{radians}, \emph{clockwise}.
+% \begin{macrocode}
+\def\Grot@setangle#1{\edef\Grot@angle{#1}}
+% \end{macrocode}
+% \end{macro}
+%
+% \subsection{Deriving a `bounding box' for rotated object}
+% We want to know the size of a `bounding box' enclosing the rotated
+% box.
+% We define two formulae (as \TeX\ macros) to work out the $x$ and $y$
+% coordinates of vertices of the rotated box
+% in relation to its original coordinates (ie its width, height
+% and depth). The box we visualize with vertices $B$, $C$,
+% $D$ and $E$ is illustrated below. The vertex
+% $S$ is the reference point on the baseline. $O$ is the centre of
+% rotation, which in the standard interface is always $S$.
+%
+% \begin{center}
+% \setlength{\unitlength}{3pt}%
+%
+% \begin{picture}(34,36)(12,44)
+% \thicklines
+% \put(20,52){\dashbox{1}(20,21){}}
+% \put(20,80){\line(0,-1){36}}
+% \put(12,58){\line(1, 0){34}}
+% \put(41,59){A}
+% \put(40,74){B}
+% \put(21,74){C}
+% \put(21,49){D}
+% \put(40,49){E}
+% \put(21,59){S}
+% \put(33,65){O}
+% \put(33,65){\circle*{1}}
+% \end{picture}
+% \end{center}
+%
+% The formulae are, for a point $P$ and angle $\alpha$:
+%\[
+% \begin{array}{l}
+% P'_x = P_x - O_x \\
+% P'_y = P_y - O_y \\
+% P''_x = ( P'_x \times \cos(\alpha)) - ( P'_y \times \sin(\alpha) ) \\
+% P''_y = ( P'_x \times \sin(\alpha)) + ( P'_y \times \cos(\alpha) ) \\
+% P'''_x = P''_x + O_x + L_x \\
+% P'''_y = P''_y + O_y
+% \end{array}
+% \]
+% The `extra' horizontal translation $L_x$ at the end is calculated so
+% that the leftmost point of the resulting box has $x$-coordinate $0$.
+% This is desirable as \TeX\ boxes must have the reference point at
+% the left edge of the box.
+%
+% \begin{macro}{\Grot@Px}
+% Work out new $x$ coordinate of point after rotation. The parameters
+% |#2| and |#3| are the original $x$ and $y$ coordinates of the point.
+% The new $x$ coordinate is stored in |#1|.
+% \begin{macrocode}
+\def\Grot@Px#1#2#3{%
+ #1\Grot@cos#2%
+ \advance#1-\Grot@sin#3}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\Grot@Py}
+% Work out new $y$ coordinate of point after rotation. The parameters
+% |#2| and |#3| are the original $x$ and $y$ coordinates of the point.
+% The new $y$ coordinate is stored in |#1|.
+% \begin{macrocode}
+\def\Grot@Py#1#2#3{%
+ #1\Grot@sin#2%
+ \advance#1\Grot@cos#3}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Grot@box}
+% This is the tricky bit. We can rotate the box, but then need
+% to work out how much space to leave for it on the page.
+%
+% We simplify matters by working out first which quadrant we are in, and
+% then picking just the right values.
+%
+% \begin{macrocode}
+\def\Grot@box{%
+ \begingroup
+% \end{macrocode}
+% We are going to need to know the sine and cosine
+% of the angle; simplest to calculate these now.
+% \begin{macrocode}
+ \CalculateSin\Grot@angle
+ \CalculateCos\Grot@angle
+ \edef\Grot@sin{\UseSin\Grot@angle}%
+ \edef\Grot@cos{\UseCos\Grot@angle}%
+^^A \GDebug{Rotate: angle \Grot@angle, sine is \Grot@sin,
+^^A cosine is \Grot@cos}%
+% \end{macrocode}
+% Save the four extents of the original box.
+% \begin{macrocode}
+ \Grot@r\wd\z@ \advance\Grot@r-\Grot@x
+ \Grot@l\z@ \advance\Grot@l-\Grot@x
+ \Grot@h\ht\z@ \advance\Grot@h-\Grot@y
+ \Grot@d-\dp\z@ \advance\Grot@d-\Grot@y
+% \end{macrocode}
+% Now a straightforward test to see which quadrant we are
+% operating in;
+% \begin{macrocode}
+ \ifdim\Grot@sin\p@>\z@
+ \ifdim\Grot@cos\p@>\z@
+% \end{macrocode}
+% First quadrant:
+% Height=$By$, Right=$Ex$, Left=$Cx$, Depth=$Dy$
+% \begin{macrocode}
+ \Grot@Py\Grot@height \Grot@r\Grot@h%B
+ \Grot@Px\Grot@right \Grot@r\Grot@d%E
+ \Grot@Px\Grot@left \Grot@l\Grot@h%C
+ \Grot@Py\Grot@depth \Grot@l\Grot@d%D
+ \else
+% \end{macrocode}
+% Second quadrant:
+% Height=$Ey$, Right=$Dx$, Left=$Bx$, Depth=$Cy$
+% \begin{macrocode}
+ \Grot@Py\Grot@height \Grot@r\Grot@d%E
+ \Grot@Px\Grot@right \Grot@l\Grot@d%D
+ \Grot@Px\Grot@left \Grot@r\Grot@h%B
+ \Grot@Py\Grot@depth \Grot@l\Grot@h%C
+ \fi
+ \else
+ \ifdim\Grot@cos\p@<\z@
+% \end{macrocode}
+% Third quadrant:
+% Height=$Dy$, Right=$Cx$, Left=$Ex$, Depth=$By$
+% \begin{macrocode}
+ \Grot@Py\Grot@height \Grot@l\Grot@d%D
+ \Grot@Px\Grot@right \Grot@l\Grot@h%C
+ \Grot@Px\Grot@left \Grot@r\Grot@d%E
+ \Grot@Py\Grot@depth \Grot@r\Grot@h%B
+ \else
+% \end{macrocode}
+% Fourth quadrant:
+% Height=$Cy$, Right=$Bx$, Left=$Dx$, Depth=$Ey$
+% \begin{macrocode}
+ \Grot@Py\Grot@height \Grot@l\Grot@h%C
+ \Grot@Px\Grot@right \Grot@r\Grot@h%B
+ \Grot@Px\Grot@left \Grot@l\Grot@d%D
+ \Grot@Py\Grot@depth \Grot@r\Grot@d%E
+ \fi
+ \fi
+% \end{macrocode}
+% Now we should translate back by $(O_x,O_y)$, but \TeX\ can not really
+% deal with boxes that do not have the reference point at the left edge.
+% (Everything with a $-$ve $x$-coordinate would over-print earlier
+% text). So we modify the horizontal translation so that the
+% reference point as understood by \TeX\ \emph{is} at the left edge.
+% This means that the `centre of rotation' is not fixed by |\rotatebox|,
+% but typically moves horizontally. We also need to find the image of
+% the original reference point, $S$, as that is where the rotation
+% specials must be inserted.
+%
+% \begin{macrocode}
+ \advance\Grot@height\Grot@y
+ \advance\Grot@depth\Grot@y
+ \Grot@Px\dimen@ \Grot@x\Grot@y
+ \Grot@Py\dimen@ii \Grot@x\Grot@y
+ \dimen@-\dimen@ \advance\dimen@-\Grot@left
+ \dimen@ii-\dimen@ii \advance\dimen@ii\Grot@y
+% \end{macrocode}
+%
+% \begin{macrocode}
+^^A \GDebug{Rotate: (l,r,h,d)^^J%
+^^A Original \the\Grot@l,\the\Grot@r,\the\Grot@h,\the\Grot@d,^^J%
+^^A New..... \the\Grot@left,\the\Grot@right,%
+^^A \the\Grot@height,\the\Grot@depth}%
+% \end{macrocode}
+%
+% \begin{macrocode}
+ \setbox\z@\hbox{%
+ \kern\dimen@
+ \raise\dimen@ii\hbox{\Grot@start\box\z@\Grot@end}}%
+ \ht\z@\Grot@height
+ \dp\z@-\Grot@depth
+ \advance\Grot@right-\Grot@left\wd\z@\Grot@right
+ \leavevmode\box\z@
+ \endgroup}
+% \end{macrocode}
+% \end{macro}
+%
+%
+% \subsection{Stretching and Scaling}
+%
+%
+% \begin{macro}{\scalebox}
+% The top level |\scalebox|. If the vertical scale factor is omitted it
+% defaults to the horizontal scale factor, |#1|.
+% \changes{v0.3d}{1994/03/06}{Better support for negative arguments.}
+% \begin{macrocode}
+\def\scalebox#1{%
+ \@ifnextchar[{\Gscale@box{#1}}{\Gscale@box{#1}[#1]}}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Gscale@box}
+% Internal version of |\scalebox|.
+% \changes{v0.7a}{1995/04/11}
+% {\cs{leavevmode} moved earlier. graphics/1521}
+% \changes{v1.0j}{1999/01/07}
+% {made long. graphics/2908}
+% \begin{macrocode}
+\long\def\Gscale@box#1[#2]#3{%
+ \leavevmode
+ \def\Gscale@x{#1}\def\Gscale@y{#2}%
+ \setbox\z@\hbox{{#3}}%
+ \setbox\tw@\hbox{\Gscale@start\rlap{\copy\z@}\Gscale@end}%
+ \ifdim#2\p@<\z@
+ \ht\tw@-#2\dp\z@
+ \dp\tw@-#2\ht\z@
+ \else
+ \ht\tw@#2\ht\z@
+ \dp\tw@#2\dp\z@
+ \fi
+ \ifdim#1\p@<\z@
+ \hb@xt@-#1\wd\z@{\kern-#1\wd\z@\box\tw@\hss}%
+ \else
+ \wd\tw@#1\wd\z@
+ \box\tw@
+ \fi}
+% \end{macrocode}
+% \end{macro}
+%
+%
+% \begin{macro}{\reflectbox}
+% Just an abbreviation for the appropriate scale to get reflection.
+% \changes{v0.3e}{1994/03/09}{Macro added}
+% \begin{macrocode}
+\def\reflectbox{\Gscale@box-1[1]}
+% \end{macrocode}
+% \end{macro}
+%
+%
+% \begin{macro}{\resizebox}
+% \changes{v0.3b}{1994/03/01}{Recode \cmd\resizebox.}
+% \changes{v0.7b}{1995/04/27}
+% {Add \cs{leavevmode} for graphics/1512}
+% Look for a |*|, which specifies that a final vertical size refers to
+% `height + depth' not just `height'.
+% \begin{macrocode}
+\def\resizebox{%
+ \leavevmode
+ \@ifstar{\Gscale@@box\totalheight}{\Gscale@@box\height}}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Gscale@@box}
+% Look for the |!| in the arguments.
+% \changes{v0.5a}{1994/07/20}
+% {Support French active !!}
+% \changes{v0.5d}{1994/10/24}
+% {Correct the support for !!}
+% \changes{v0.7g}
+% {1995/12/06}{Use \cs{Gin@exclamation}}
+% \begin{macrocode}
+\def\Gscale@@box#1#2#3{%
+ \let\@tempa\Gin@exclamation
+ \expandafter\def\expandafter\@tempb\expandafter{\string#2}%
+ \expandafter\def\expandafter\@tempc\expandafter{\string#3}%
+ \ifx\@tempb\@tempa
+ \ifx\@tempc\@tempa
+ \toks@{\mbox}%
+ \else
+ \toks@{\Gscale@box@dd{#3}#1}%
+ \fi
+ \else
+ \ifx\@tempc\@tempa
+ \toks@{\Gscale@box@dd{#2}\width}%
+ \else
+ \toks@{\Gscale@box@dddd{#2}\width{#3}#1}%
+ \fi
+ \fi
+ \the\toks@}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Gscale@box@dd}
+% Scale the text |#3| in both directions by a factor $|#1|/|#2|$.
+% \changes{v0.3i}{1994/03/23}
+% {Missing percent added}
+% \changes{v1.0i}{1999/01/07}
+% {made long. graphics/2908}
+% \begin{macrocode}
+\long\def\Gscale@box@dd#1#2#3{%
+ \@begin@tempboxa\hbox{#3}%
+ \setlength\@tempdima{#1}%
+ \setlength\@tempdimb{#2}%
+ \Gscale@div\@tempa\@tempdima\@tempdimb
+ \Gscale@box\@tempa[\@tempa]{\box\@tempboxa}%
+ \@end@tempboxa}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Gscale@box@dddd}
+% Scale the text |#5| horizontally by a factor $|#1|/|#2|$ and
+% vertically by a factor $|#3|/|#4|$.
+% \changes{v0.3i}{1994/03/23}
+% {Missing percent added}
+% \changes{v0.7e}{1995/09/29}
+% {Add \cs{ifGin@iso} code added}
+% \changes{v1.0i}{1999/01/07}
+% {made long. graphics/2908}
+% \begin{macrocode}
+\long\def\Gscale@box@dddd#1#2#3#4#5{%
+ \@begin@tempboxa\hbox{#5}%
+ \setlength\@tempdima{#1}%
+ \setlength\@tempdimb{#2}%
+ \Gscale@div\@tempa\@tempdima\@tempdimb
+ \setlength\@tempdima{#3}%
+ \setlength\@tempdimb{#4}%
+ \Gscale@div\@tempb\@tempdima\@tempdimb
+ \ifGin@iso
+ \ifdim\@tempa\p@>\@tempb\p@
+ \let\@tempa\@tempb
+ \else
+ \let\@tempb\@tempa
+ \fi
+ \fi
+ \Gscale@box\@tempa[\@tempb]{\box\@tempboxa}%
+ \@end@tempboxa}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\ifGin@iso}
+% If this flag is true, then specifying two lengths to |\resizebox|
+% scales the box by the same factor in either direction, such that
+% neither length \emph{exceeds} the stated amount. No user interface
+% to this flag in the standard package, but it is used by the
+% |keepaspectratio| key to |\includegraphics| in the \textsf{graphicx}
+% package.
+% \changes{v0.7e}{1995/09/29}
+% {Maco added}
+% \begin{macrocode}
+\newif\ifGin@iso
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Gscale@div}
+% The macro |#1| is set to the ratio of the lengths |#2| and |#3|.
+% \changes{v0.7a}{1995/04/11}
+% {Add trap for division by 0}
+% \changes{v0.7d}{1995/09/27}
+% {Use \cs{setlength} to support calc package}
+% \changes{v1.0a}{1996/09/16}
+% {Stop infinite loop if 2nd arg zero. graphics/2259}
+% \begin{macrocode}
+\def\Gscale@div#1#2#3{%
+ \setlength\dimen@{#3}%
+ \ifdim\dimen@=\z@
+ \PackageError{graphics}{Division by 0}\@eha
+ \dimen@#2%
+ \fi
+ \edef\@tempd{\the\dimen@}%
+ \setlength\dimen@{#2}%
+ \count@65536\relax
+ \ifdim\dimen@<\z@
+ \dimen@-\dimen@
+ \count@-\count@
+ \fi
+ \ifdim\dimen@>\z@
+ \loop
+ \ifdim\dimen@<8192\p@
+ \dimen@\tw@\dimen@
+ \divide\count@\tw@
+ \repeat
+ \dimen@ii\@tempd\relax
+ \divide\dimen@ii\count@
+ \divide\dimen@\dimen@ii
+ \fi
+ \edef#1{\strip@pt\dimen@}}
+% \end{macrocode}
+% \end{macro}
+%
+% Restore Catcodes
+% \begin{macrocode}
+\Gin@codes
+\let\Gin@codes\relax
+% \end{macrocode}
+%
+% \begin{macrocode}
+%</package>
+% \end{macrocode}
+%
+% \Finale
+%
diff --git a/Master/texmf-dist/source/latex/graphics/graphics.ins b/Master/texmf-dist/source/latex/graphics/graphics.ins
new file mode 100644
index 00000000000..e991c95944c
--- /dev/null
+++ b/Master/texmf-dist/source/latex/graphics/graphics.ins
@@ -0,0 +1,116 @@
+%%
+%% This file is part of the Standard LaTeX `Graphics Bundle'.
+%% It may be distributed under the terms of the LaTeX Project Public
+%% License, as described in lppl.txt in the base LaTeX distribution.
+%% Either version 1.0 or, at your option, any later version.
+%%
+
+% This file requires docstrip version 2.4 available from
+% ftp.dante.de tex-archive/macros/latex/unpacked/docstrip.tex
+
+\input docstrip
+
+
+\preamble
+\endpreamble
+
+\keepsilent
+\askforoverwritefalse
+
+\usedir{tex/latex/graphics}
+
+% The packages
+
+\generate{\file{graphics.sty}{\from{graphics.dtx}{package}}}
+
+\generate{\file{color.sty}{\from{color.dtx}{package}}}
+
+\generate{\file{graphicx.sty}{\from{graphicx.dtx}{package}}}
+
+\generate{\file{trig.sty}{\from{trig.dtx}{package}}}
+
+\generate{\file{keyval.sty}{\from{keyval.dtx}{package}}}
+
+\generate{\file{epsfig.sty}{\from{epsfig.dtx}{package}}}
+
+\generate{\file{pstcol.sty}{\from{pstcol.dtx}{package}}}
+
+\generate{\file{lscape.sty}{\from{lscape.dtx}{package}}}
+
+
+%% Generate a `template' .def file as an example for a new driver.
+%% (This is not set up yet.)
+%%\generate{\file{template.def}{%
+%% \from{drivers.dtx}{template}}}
+
+
+% These ones probably work
+\generate{%
+ \file{dvips.def}{%
+ \from{drivers.dtx}{dvips,color1,psrulesZ,dosrules,macrules}}
+ \file{dvipdf.def}{%
+ \from{drivers.dtx}{dvipdf,color1,psrulesZ}}
+ \file{dvipsone.def}{%
+ \from{drivers.dtx}{tiffrules,dvipsone,color1,dosrules,psrules}}
+ \file{dviwin.def}{%
+ \from{drivers.dtx}{dviwin,nops}}
+ \file{emtex.def}{%
+ \from{drivers.dtx}{emtex,dosrules,nops}}
+% OzTeX (>3.0) uses dvips.def
+% \file{oztex.def}{%
+% \from{drivers.dtx}{oztex,macrules,nops}}
+ \file{pctexps.def}{%
+ \from{drivers.dtx}{pctexps,color3,colorfix}}
+ \file{pctex32.def}{%
+ \from{drivers.dtx}{pctex32,color1}}
+ \file{pctexhp.def}{%
+ \from{drivers.dtx}{pctexhp,nops}}
+ \file{pctexwin.def}{%
+ \from{drivers.dtx}{pctexwin,nops}}
+ \file{truetex.def}{%
+ \from{drivers.dtx}{truetex,color4,nops}}
+ \file{tcidvi.def}{%
+ \from{drivers.dtx}{tcidvi,color4,nops}}
+ \file{dvipsnam.def}{%
+ \from{drivers.dtx}{dvipsnames}}}
+
+
+% these ones are largely untested and no longer generated by default.
+%\generate{%
+% \file{pubps.def}{%
+% \from{drivers.dtx}{pubps,psrules}}
+% \file{psprint.def}{%
+% \from{drivers.dtx}{psprint,psrules}}
+%% The textures code generated by this option does more or less work
+%% I believe, but it does not use all of textures features, and as I
+%% have not got a Mac to test it on, it seems better to remove it for
+%% now.
+%% This release of the graphics distribution contains a textures.def
+%% written by Arthur Ogawa which is distributed as a separate file.
+%% It should however be installed in the same directory as the .def
+%% files generated by this .ins installation script.
+%% \file{textures.def}{%
+%% \from{drivers.dtx}{textures,color2,macrules}}
+%%
+%%%% Old versions of textures (prior to 1.7) do not have colour specials.
+%%%% To use colour with these versions, uncomment the next two lines.
+%%
+%%%% \file{textures.def}{%
+%%%% \from{drivers.dtx}{textures,color3,colorfix,macrules}}
+%%
+%%
+% \file{ln.def}{%
+% \from{drivers.dtx}{ln}}
+% \file{dvi2ps.def}{%
+% \from{drivers.dtx}{dvi2ps,psrules}}
+% \file{dvitops.def}{%
+% \from{drivers.dtx}{dvitops,psrules}}
+% \file{dvilaser.def}{%
+% \from{drivers.dtx}{dvilaser,psrules}}
+% \file{dvialw.def}{%
+% \from{drivers.dtx}{dvialw,psrules}}}
+%
+%
+%
+
+\endbatchfile
diff --git a/Master/texmf-dist/source/latex/graphics/graphicx.dtx b/Master/texmf-dist/source/latex/graphics/graphicx.dtx
new file mode 100644
index 00000000000..9d897477845
--- /dev/null
+++ b/Master/texmf-dist/source/latex/graphics/graphicx.dtx
@@ -0,0 +1,863 @@
+%
+% \iffalse
+%
+%% graphicx.dtx Copyright (C) 1994 David Carlisle Sebastian Rahtz
+%% Copyright (C) 1995 1996 1997 1999 David Carlisle
+%%
+%% This file is part of the Standard LaTeX `Graphics Bundle'.
+%% It may be distributed under the terms of the LaTeX Project Public
+%% License, as described in lppl.txt in the base LaTeX distribution.
+%% Either version 1.0 or, at your option, any later version.
+%%
+%<*dtx>
+ \ProvidesFile{graphicx.dtx}
+%</dtx>
+%<package>\NeedsTeXFormat{LaTeX2e}[1995/12/01]
+%<package>\ProvidesPackage{graphicx}
+%<driver> \ProvidesFile{graphicx.drv}
+% \fi
+% \ProvidesFile{graphicx.dtx}
+ [1999/02/16 v1.0f Enhanced LaTeX Graphics (DPC,SPQR)]
+%
+% \iffalse
+%<*driver>
+\documentclass{ltxdoc}
+\newenvironment{key}[2]{\expandafter\macro\expandafter{%
+ \csname KV@#1@#2\endcsname}}{\endmacro}
+%
+\begin{document}
+ \DocInput{graphicx.dtx}
+\end{document}
+%</driver>
+% \fi
+%
+% \GetFileInfo{graphicx.dtx}
+%
+% \title{The \textsf{graphicx} package\thanks{This file
+% has version number \fileversion, last
+% revised \filedate.}}
+% \author{D. P. Carlisle\and S. P. Q. Rahtz}
+% \date{\filedate}
+% \maketitle
+%
+% \CheckSum{593}
+%
+% \changes{v0.3}{1994/03/01}
+% {First DPC version (after prototype by SPQR).}
+% \changes{v0.4b}{1994/05/30}
+% {Rename from egraphics. 8+3 name for CDROM}
+% \changes{v1.0}{1996/05/29}
+% {Version 1 at last}
+%
+% \def\star{{\ttfamily*}}
+% \makeatletter
+% \def\Describe@Macro#1{\endgroup
+% \setbox0=\lastbox\llap{\PrintDescribeMacro{#1}}}%
+% \makeatother
+% \marginparsep0pt
+%
+% \section{Introduction}
+%
+% This package provides an alternative interface to the \LaTeXe\
+% graphics functions. The command names provided are the same as in the
+% standard package, and they use the same internal functions. However
+% the meaning of the optional arguments is different. Note \emph{only}
+% the optional arguments have changed: any document which only uses the
+% graphics commands with the mandatory arguments and/or the star-forms
+% will work identically (with essentially identical implementation) with
+% the two packages.
+%
+% \section{Key=Value Interface}
+% When the decision to produce \LaTeXe\ was made, certain `guiding
+% principles' were made (and published in the original announcement).
+% One of these was that all new features would `conform to the
+% conventions of version 2.09'. Specifically this meant that new
+% commands would obey the same basic syntax rules for arguments as the
+% existing commands.
+%
+% Standard \LaTeX\ optional arguments are \emph{positional}. If a
+% command were to take three optional arguments, then there would be no
+% way of specifying only the third, one would have to give all three,
+% even if the first two were repeats of the default values. Basically
+% this means that `standard' optional arguments are not suitable if
+% there is more than one option. Various existing packages (for
+% \LaTeX~2.09) have recognised this, and used `named arguments' in
+% various forms. Perhaps the two most noticeable are |psfig| and
+% |pstricks|. With `named arguments' (sometimes called `attributes')
+% each option is not tied to a particular position, but rather given a
+% name (or key) and any options that must be set are set by explicitly
+% associating this name with the desired value.
+%
+% The members of the \LaTeX3 project do appreciate the importance of
+% this kind of syntax, but felt that rather than extending the syntax of
+% \LaTeX\ in an uncoordinated way, it would be better to keep with
+% `standard arguments' in \LaTeXe, which is intended as a `consolidation
+% of existing \LaTeX\ variants'. The long term planning for an eventual
+% \LaTeX3 release will then be able to consider the whole \LaTeX\
+% user interface, and a suitable syntax for named arguments. It is
+% important that such an interface design is not hampered by having to
+% retain compatibility with earlier attempts at a named argument
+% syntax. For this reason this |graphicx| package, which uses the named
+% argument mechanism from the |keyval| package should be considered `non
+% standard' although it is supported by the same mechanism, and same
+% authors as the `standard' |graphics| package.
+%
+% \section{The User Interface}
+%
+% \DescribeMacro
+% \includegraphics\star\oarg{key-val list}\marg{file}\\
+% \DescribeMacro
+% \includegraphics\star\oarg{llx,lly}\oarg{urx,ury}\marg{file}\\
+% Include a graphics file.
+%
+% The star form is just for
+% compatibility with the standard interface, and essentially just adds
+% |clip| to the keys specified. Similarly the second, two-optional
+% argument form is for increased compatibility with the standard
+% package. The two optional argument form is not needed in the |keyval|
+% interface.
+%
+% Various `keys' or named arguments are supported.
+% \begin{description}
+% \item[bb] Set the bounding box. The argument should be four
+% dimensions, separated by spaces.
+% \item[bbllx,bblly,bburx,bbury] Set the bounding box. Mainly for
+% compatibility with older packages. |bbllx=a,bblly=b,bburx=c,bbury=d|
+% is equivalent to |bb = a b c d|.
+% \item[natwidth,natheight] Again an alternative to |bb|.
+% |natheight=h,natwidth=w| is equivalent to |bb = 0 0 h w|.
+% \item[viewport] Modify the bounding box specified in the file.
+% The four values specify a bounding box \emph{relative} to the
+% |llx|,|lly| coordinate of the original box.
+% \item[trim] Modify the bounding box specified in the file.
+% The four values specify the amounts to remove from
+% the left, bottom, right and top of the original box.
+% \item[hiresbb] Boolean valued key. Defaults to |true|.
+% Causes \TeX\ to look for |%%HiResBoundingBox| comments rather than
+% the standard |%%BoundingBox|. May be set to |false| to override
+% a default setting of true specified by the |hiresbb| package option.
+% \item[angle] Rotation angle.
+% \item[origin] Rotation origin (see |\rotatebox|, below).
+% \item[width] Required width, a dimension (default units |bp|). The
+% graphic will be scaled to make the width the specified dimension.
+% \item[height] Required height. a dimension (default units |bp|).
+% \item[totalheight] Required totalheight (ie height $+$ depth). a
+% dimension (default units |bp|). Most useful after a rotation (when the
+% height might be zero).
+% \item[keepaspectratio] Boolean valued key (like |clip|). If it is set
+% to true, modify the meaning of the |width| and |height| (and
+% |totalheight|) keys such that if both are specified then rather than
+% distort the figure the figure is scaled such that neither dimension
+% \emph{exceeds} the stated dimensions.
+% \item[scale] Scale factor.
+% \item[clip] Either `true' or `false' (or no value, which is equivalent
+% to `true'). Clip the graphic to the bounding box (or viewport if one
+% is specified).
+% \item[draft] a boolean valued key, like `clip'. locally switches to
+% draft mode, ie.\ do not include the graphic, but leave the
+% correct space, and print the filename.
+% \item[type] Specify the file type. (Normally determined from the file
+% extension.)
+% \item[ext] Specify the file extension.
+% \emph{Only} for use with |type|.
+% \item[read] Specify the `read file' which is used for determining the
+% size of the graphic. \emph{Only} for use with |type|.
+% \item[command] Specify the file command.
+% \emph{Only} for use with |type|.
+% \end{description}
+%
+% The arguments are interpreted left to right. |clip|, |draft|, |bb|,,
+% and |bbllx| etc.\ have the same effect wherever they appear. but the
+% scaling and rotation keys interact.
+%
+% Any scaling that is specified \emph{before} rotation, is handled by
+% the internal graphics inclusion function. Rotation, or any later
+% scaling is handled by implicitly calling |\rotatebox| or |\scalebox|.
+% So |[height=1in,angle=90]| scales the graphic to 1in, then rotates it,
+% so it is one inch wide. |[angle=90,height=1in]| first rotates, then
+% scales the result so that it is 1in high. A driver that can scale
+% included graphics, but not arbitrary text will not be able to support
+% the second form, as it will require a call to |\scalebox|, but the
+% first form should work as there the scaling is handled by
+% |\Ginclude@graphics|.
+%
+% \DescribeMacro
+% \rotatebox\oarg{key-val list}\marg{angle}\marg{text}\\
+% Rotate \emph{text}.
+%
+% The keys supported by |\rotatebox| are:
+% \begin{description}
+% \item[origin] Specify the centre of rotation. |origin=|\meta{label},
+% where the labels are up to two of |lrctbB| (|B| denotes the
+% baseline, as for PSTricks).
+% \item[x,y] An alternative to
+% |origin|. |x=|\meta{dimen}|,y=|\meta{dimen} The $x,y$ coordinate of
+% the centre of rotation. As usual |\height| etc may be used.
+% \item[units] Specify the units used in the main argument. eg
+% |units=-360| would mean that the argument refered to degrees
+% \emph{clockwise} instead of the default anti-clockwise rotation.
+% \end{description}
+%
+% As an example |\rotatebox[origin=c]{180}{text}| will rotate ``text''
+% around its centre, thus creating a final box of the same dimensions as
+% the original box. This is to be contrasted to the default behaviour,
+% which rotates around the reference point on the baseline, thus
+% producing a box that is mainly \emph{below} the baseline.
+%
+% \StopEventually{}
+%
+%
+% \section{Implementation}
+%
+% \begin{macrocode}
+%<*package>
+% \end{macrocode}
+%
+% One new option is handled by keyval. It suppresses the error
+% normally generated if an unknow keyval key is used.
+% (This helps porting between drivers that use extended interfaces.)
+% \changes{v1.0e}{1999/01/10}{new unknownkeysallowed option}
+% \begin{macrocode}
+\DeclareOption{unknownkeysallowed}
+ {\PassOptionsToPackage\CurrentOption{keyval}}
+% \end{macrocode}
+%
+% All other options are handled by the \textsf{graphics} package.
+% \begin{macrocode}
+\DeclareOption*{\PassOptionsToPackage\CurrentOption{graphics}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+\ProcessOptions
+% \end{macrocode}
+%
+% This package requires these two building blocks.
+% \begin{macrocode}
+\RequirePackage{keyval,graphics}
+% \end{macrocode}
+%
+%
+% \subsection{Graphics Inclusion}
+%
+%
+% First we declare the `bounding box' keys. These all use
+% |\Gin@defaultbp| so that the \meta{value} can be given as a length in
+% the usual \TeX\ units such as |cm| or as an integer, taken as |bp|.
+%
+% \begin{key}{Gin}{bb}
+% \begin{macrocode}
+\define@key{Gin}{bb}
+ {\Gin@bboxtrue\Gread@parse@bb#1 \\}
+% \end{macrocode}
+% \end{key}
+%
+% \begin{key}{Gin}{bbllx}
+% \begin{key}{Gin}{bblly}
+% \begin{key}{Gin}{bburx}
+% \begin{key}{Gin}{bbury}
+% \changes{v0.3b}{1994/03/11}{use bbllx not llx}
+% \changes{v0.3b}{1994/03/11}{add natheight and natwidth}
+% \changes{v0.6a}{1995/04/11}{New \cs{Gin@defaultbb} code}
+% \changes{v0.6b}{1995/06/26}{typos fixed for graphics/1685}
+% \begin{macrocode}
+\define@key{Gin}{bbllx}
+ {\Gin@bboxtrue\Gin@defaultbp\Gin@llx{#1}}
+\define@key{Gin}{bblly}
+ {\Gin@bboxtrue\Gin@defaultbp\Gin@lly{#1}}
+\define@key{Gin}{bburx}
+ {\Gin@bboxtrue\Gin@defaultbp\Gin@urx{#1}}
+\define@key{Gin}{bbury}
+ {\Gin@bboxtrue\Gin@defaultbp\Gin@ury{#1}}
+% \end{macrocode}
+% \end{key}
+% \end{key}
+% \end{key}
+% \end{key}
+%
+% \begin{key}{Gin}{hiresbb}
+% \changes{v1.0b}{1996/10/29}
+% {hiresbb key added}
+% If set to true (the default) \TeX\ will look for bounding box
+% comments of the form |%%HiResBoundingBox| (which typically have
+% real values) instead of the standard |%%BoundingBox| (which should
+% have integer values).
+% It may be set to false to override a package option of hiresbb.
+% \begin{macrocode}
+\define@key{Gin}{hiresbb}[true]{%
+ \edef\Gread@BBox{%
+ \@percentchar\@percentchar
+ \csname if#1\endcsname HiRes\fi
+ BoundingBox}}
+% \end{macrocode}
+% \end{key}
+%
+% \begin{key}{Gin}{natheight}
+% \begin{key}{Gin}{natheight}
+% \changes{v0.6d}{1995/09/22}
+% {typos fixed in natheight and natwidth keys}
+% \begin{macrocode}
+\let\KV@Gin@natwidth\KV@Gin@bburx
+\let\KV@Gin@natheight\KV@Gin@bbury
+% \end{macrocode}
+% \end{key}
+% \end{key}
+%
+% \begin{key}{Gin}{viewport}
+% \begin{key}{Gin}{trim}
+% \changes{v0.6a}{1995/04/11}{viewport and trim keys added}
+% \changes{v0.6c}{1995/09/07}{arithmetic in viewport key fixed}
+% A `viewport' is a user-specified area of the graphic to be included.
+% It should not be confused with the `Bounding Box' of a PS file.
+% In fact, the origin for a viewport specification is the (llx,lly)
+% lower left coordinate of the bounding box. If a viewport is
+% specified, and clipping is turned on, clipping is based on the
+% viewport, not on the boundingbox.
+%
+% Both `viewport' and `trim' were suggested (and originally, but
+% differently, implemented) by Arthur Ogawa.
+% \begin{macrocode}
+\define@key{Gin}{viewport}
+ {\let\Gin@viewport@code\Gin@viewport\Gread@parse@vp#1 \\}
+\define@key{Gin}{trim}
+ {\let\Gin@viewport@code\Gin@trim\Gread@parse@vp#1 \\}
+% \end{macrocode}
+% \end{key}
+% \end{key}
+%
+% \begin{macro}{\Gread@parse@vp}
+% Grabs four bounding box values like |\Gread@parse@bp| but saves them
+% in alternative macros that are used in the viewport and trim cases to
+% modify the bounding box read from the file.
+% \begin{macrocode}
+\def\Gread@parse@vp#1 #2 #3 #4 #5\\{%
+ \Gin@defaultbp\Gin@vllx{#1}%
+ \Gin@defaultbp\Gin@vlly{#2}%
+ \Gin@defaultbp\Gin@vurx{#3}%
+ \Gin@defaultbp\Gin@vury{#4}}%
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Gin@viewport}
+% \changes{v1.0c}{1996/10/31}{Original bb saved}
+% If a viewport is specified, reset the bounding box cordinates
+% by adding the original origin, |\Gin@llx|, |\Gin@lly| to the new
+% values specified as the viewport. The original Bounding box
+% coordinates are saved in |\Gin@ollx|\ldots\ some drivers
+% might need this information (currently just |tcidvi|).
+% \begin{macrocode}
+\def\Gin@viewport{%
+ \let\Gin@ollx\Gin@llx
+ \let\Gin@olly\Gin@lly
+ \let\Gin@ourx\Gin@urx
+ \let\Gin@oury\Gin@ury
+ \dimen@\Gin@llx\p@\advance\dimen@ \Gin@vurx\p@
+ \edef\Gin@urx{\strip@pt\dimen@}%
+ \dimen@\Gin@lly\p@\advance\dimen@ \Gin@vury\p@
+ \edef\Gin@ury{\strip@pt\dimen@}%
+ \dimen@\Gin@llx\p@\advance\dimen@ \Gin@vllx\p@
+ \edef\Gin@llx{\strip@pt\dimen@}%
+ \dimen@\Gin@lly\p@\advance\dimen@ \Gin@vlly\p@
+ \edef\Gin@lly{\strip@pt\dimen@}}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Gin@trim}
+% \changes{v1.0c}{1996/10/31}{Original bb saved}
+% If a trim is specified, reset the bounding box cordinates
+% by trimming the four specified values off each side of the
+% graphic.
+% \begin{macrocode}
+\def\Gin@trim{%
+ \let\Gin@ollx\Gin@llx
+ \let\Gin@olly\Gin@lly
+ \let\Gin@ourx\Gin@urx
+ \let\Gin@oury\Gin@ury
+ \dimen@\Gin@llx\p@\advance\dimen@ \Gin@vllx\p@
+ \edef\Gin@llx{\strip@pt\dimen@}%
+ \dimen@\Gin@lly\p@\advance\dimen@ \Gin@vlly\p@
+ \edef\Gin@lly{\strip@pt\dimen@}%
+ \dimen@\Gin@urx\p@\advance\dimen@ -\Gin@vurx\p@
+ \edef\Gin@urx{\strip@pt\dimen@}%
+ \dimen@\Gin@ury\p@\advance\dimen@ -\Gin@vury\p@
+ \edef\Gin@ury{\strip@pt\dimen@}}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Gin@vllx}
+% \begin{macro}{\Gin@vlly}
+% \begin{macro}{\Gin@vurx}
+% \begin{macro}{\Gin@vury}
+% Four macros to hold the modifiers for the bounding box for viewport
+% and trim specifications.
+% \begin{macrocode}
+\let\Gin@vllx\Gin@llx\let\Gin@vlly\Gin@llx
+\let\Gin@vurx\Gin@llx\let\Gin@vury\Gin@llx
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{key}{Gin}{angle}
+% Specify a rotation. This is just handled by wrapping the
+% |\includegraphics| command in a call to the internal version of
+% |\rotatebox|. Normally this is the `standard' version but if an
+% |origin| key is used in |\includegraphics| then the \emph{keyval}
+% version of origin is used, and the |origin| key is passed on.
+% \begin{macrocode}
+\define@key{Gin}{angle}
+ {\Gin@esetsize
+ \@tempswatrue
+ \edef\@tempa{\toks@{\noexpand\Gin@erotate{#1}{\the\toks@}}}%
+ \@tempa}
+% \end{macrocode}
+% \end{key}
+%
+% \begin{key}{Gin}{origin}
+% Pass the origin key value on to |\rotatebox|. |\Gin@erotate| is
+% initialised to |\Grot@box@std| later in the file, after the latter has
+% been defined.
+% \changes{v0.6e}{1995/09/28}
+% {key added}
+% \begin{macrocode}
+\define@key{Gin}{origin}[c]{%
+ \def\Gin@erotate{\Grot@box@kv[origin=#1]}}
+% \end{macrocode}
+% \end{key}
+%
+% \begin{key}{Gin}{width}
+% \begin{key}{Gin}{height}
+% Save the required height and width. The actual scaling is done later.
+% \begin{macrocode}
+\define@key{Gin}{width}{\def\Gin@ewidth{#1}}
+\define@key{Gin}{height}{\def\Gin@eheight{#1}}
+% \end{macrocode}
+% \end{key}
+% \end{key}
+%
+% \begin{key}{Gin}{totalheight}
+% \changes{v0.6a}{1995/04/11}{New totalheight key}
+% The same as |height| key, but locally changes |\Gin@eresize| to
+% |\totalheight| from its default value of |\height|.
+% \begin{macrocode}
+\define@key{Gin}{totalheight}{%
+ \def\Gin@eresize{\totalheight}\def\Gin@eheight{#1}}
+% \end{macrocode}
+% \end{key}
+%
+% \begin{key}{Gin}{keepaspectratio}
+% Boolean valued key (like |clip|). If it is set to true,
+% modify the meaning of the |width| and |height| (and |totalheight|)
+% keys such that if both are specified then rather than distort the
+% figure the figure is scaled such that neither dimension \emph{exceeds}
+% the stated dimensions.
+% \changes{v0.6e}{1995/09/28}
+% {key added}
+% \changes{v0.6h}{1995/12/06}
+% {Name changed to keepaspectratio}
+% \begin{macrocode}
+\define@key{Gin}{keepaspectratio}[true]{%
+ \lowercase{\Gin@boolkey{#1}}{iso}}
+% \end{macrocode}
+% \end{key}
+%
+% \begin{key}{Gin}{scale}
+% \changes{v0.6h}{1995/12/06}
+% {Use \cs{Gin@exclamation}}
+% If the scaling is being handled externally, wrap |\includegraphics| in
+% the internal form of |\scalebox|, otherwise locally define
+% |\Gin@req@sizes| to calculate the required sizes based on
+% scale factor.
+% \begin{macrocode}
+\define@key{Gin}{scale}{%
+ \if@tempswa
+ \edef\@tempa{\toks@{\noexpand\Gscale@box{#1}[#1]{\the\toks@}}}%
+ \@tempa
+ \else
+ \def\Gin@req@sizes{%
+ \def\Gin@scalex{#1}\let\Gin@scaley\Gin@exclamation
+ \Gin@req@height\Gin@scalex\Gin@nat@height
+ \Gin@req@width\Gin@scalex\Gin@nat@width}%
+ \fi
+ \@tempswatrue}
+% \end{macrocode}
+% \end{key}
+%
+% \begin{key}{Gin}{draft}
+% Locally set the draft switch to true. This is used by the code in
+% \textsf{graphics} package to suppress the file inclusion.
+% \begin{macrocode}
+\define@key{Gin}{draft}[true]{%
+ \lowercase{\Gin@boolkey{#1}}{draft}}
+% \end{macrocode}
+% \end{key}
+%
+% \begin{key}{Gin}{clip}
+% Locally set the clip switch to true. This is used by the code in
+% \textsf{graphics} package to suppress the printing of anything outside
+% the bounding box specified.
+% \begin{macrocode}
+\define@key{Gin}{clip}[true]{%
+ \lowercase{\Gin@boolkey{#1}}{clip}}
+% \end{macrocode}
+% \end{key}
+%
+% \begin{key}{Gin}{type}
+% If you use `type' you must use no extension in the main argument
+% and you must use `ext'. You can also use `read' and `command'.
+% \changes{v0.5a}{1994/11/29}
+% {remove \cs{Gin@sep}}
+% \begin{macrocode}
+\define@key{Gin}{type}{%
+ \def\Ginclude@graphics##1{%
+ \begingroup
+ \def\Gin@base{##1}%
+ \edef\@tempa{{#1}{\Gin@eread}{\Gin@ecom{##1\Gin@eext}}}%
+ \expandafter\Gin@setfile\@tempa
+ \endgroup}}
+% \end{macrocode}
+% \end{key}
+%
+% \begin{key}{Gin}{ext}
+% \changes{v1.0d}{1997/06/09}{initialise ext to empty}
+% Specify an extension, for use with the `type' key.
+% \begin{macrocode}
+\define@key{Gin}{ext}{\def\Gin@eext{#1}}
+\let\Gin@eext\@empty
+% \end{macrocode}
+% \end{key}
+%
+% \begin{key}{Gin}{read}
+% Specify a read file, for use with the `type' key.
+% You may want to globally set this to |*| using |\setkeys|.
+% |*| means read the graphic file for size info, as in
+% |\DeclareGraphicsRule|.
+% \changes{v0.5a}{1994/11/29}
+% {Add default * possibility.}
+% \begin{macrocode}
+\define@key{Gin}{read}{%
+ \def\Gin@eread{#1}%
+ \def\@tempa{*}\ifx\@tempa\Gin@eread\def\Gin@eread{\Gin@eext}\fi}
+\let\Gin@eread\@empty
+% \end{macrocode}
+% \end{key}
+%
+% \begin{key}{Gin}{command}
+% Specify a command, for use with the `type' key.
+% \begin{macrocode}
+\define@key{Gin}{command}{\def\Gin@ecom##1{#1}}
+\let\Gin@ecom\@firstofone
+% \end{macrocode}
+% \end{key}
+%
+% \begin{macro}{\Gin@boolkey}
+% Helper function for defining boolean valued functions. The order of
+% arguments allows |\lowercase| to only act on the user-supplied
+% argument.
+% \changes{v0.4a}{1994/04/14}{Make `empty'!=true so clip!= works}
+% \begin{macrocode}
+\def\Gin@boolkey#1#2{%
+ \csname Gin@#2\ifx\relax#1\relax true\else#1\fi\endcsname}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Gin@esetsize}
+% \changes{v0.6h}{1995/12/06}
+% {Use \cs{Gin@exclamation}}
+% Arrange for the final size to be set, either by wrapping the include
+% graphics call in |\scalebox|, or by redefining |\Gin@req@sizes|
+% appropriately.
+% \begin{macrocode}
+\def\Gin@eresize{\height}
+\def\Gin@esetsize{%
+ \let\@tempa\Gin@exclamation
+ \if@tempswa
+% \end{macrocode}
+% External. Wrap the |\includegraphics| command in a call to the
+% internal form of |\scalebox| to handle the rotation.
+% \begin{macrocode}
+ \edef\@tempa{\toks@{\noexpand
+ \Gscale@@box\noexpand\Gin@eresize
+ {\Gin@ewidth}{\Gin@eheight}{\the\toks@}}}%
+ \@tempa
+ \else
+% \end{macrocode}
+% Internal. Handle scaling with the |\includegraphics| command directly
+% rather than calling |\scalebox|.
+% \begin{macrocode}
+ \ifx\Gin@ewidth\@tempa
+ \ifx\Gin@eheight\@tempa
+% \end{macrocode}
+% No resizing.
+% \begin{macrocode}
+ \else
+% \end{macrocode}
+% Just height specified.
+% \changes{v0.6e}{1995/09/28}
+% {Use \cs{setlength} to support calc package}
+% \changes{v0.6h}{1995/12/06}
+% {Use \cs{Gin@exclamation}}
+% \begin{macrocode}
+ \let\Gin@@eheight\Gin@eheight
+ \def\Gin@req@sizes{%
+ \Gscale@div\Gin@scaley\Gin@@eheight\Gin@nat@height
+ \let\Gin@scalex\Gin@exclamation
+ \setlength\Gin@req@height\Gin@@eheight
+ \Gin@req@width\Gin@scaley\Gin@nat@width}%
+ \fi
+ \else
+ \ifx\Gin@eheight\@tempa
+% \end{macrocode}
+% Just width specified.
+% \changes{v0.6e}{1995/09/28}
+% {Use \cs{setlength} to support calc package}
+% \changes{v0.6h}{1995/12/06}
+% {Use \cs{Gin@exclamation}}
+% \begin{macrocode}
+ \let\Gin@@ewidth\Gin@ewidth
+ \def\Gin@req@sizes{%
+ \Gscale@div\Gin@scalex\Gin@@ewidth\Gin@nat@width
+ \let\Gin@scaley\Gin@exclamation
+ \setlength\Gin@req@width\Gin@@ewidth
+ \Gin@req@height\Gin@scalex\Gin@nat@height}%
+ \else
+% \end{macrocode}
+% Both height and width specified.
+% \begin{macrocode}
+ \let\Gin@@ewidth\Gin@ewidth
+ \let\Gin@@eheight\Gin@eheight
+% \end{macrocode}
+% \changes{v0.6g}{1995/11/10}
+% {Use \cs{ifGin@iso} to support isoscale key}
+% At this point can locally redefine |\Gin@nosize|. Instead
+% of generating an error, just set the `natural' size to be the
+% `requested size'. Previous versions of this package did not
+% allow the use of |height| and |width| unless the natural size was
+% known as otherwise \LaTeX\ can not calculate the scale factor.
+% However many drivers (especially for bitmap formats) can work this out
+% themselves, so as long as both |height| and |width| are given, so
+% \LaTeX\ knows the size to leave, accept this. This assumes the code in
+% the driver file will use the `required height' information, not the
+% scale factors, which will be set to 1!.
+% \changes{v1.0a}{1996/08/05}
+% {Missing percent added for graphics/2244}
+% \begin{macrocode}
+ \def\Gin@nosize##1{%
+ \KV@Gin@natwidth\Gin@@ewidth
+ \KV@Gin@natheight\Gin@@eheight}%
+% \end{macrocode}
+%
+% \begin{macrocode}
+ \def\Gin@req@sizes{%
+ \Gscale@div\Gin@scalex\Gin@@ewidth\Gin@nat@width
+ \Gscale@div\Gin@scaley\Gin@@eheight\Gin@nat@height
+% \end{macrocode}
+% \changes{v0.6f}{1995/09/29}
+% {Use \cs{ifGin@iso} to support isoscale key}
+% Donald Arseneau requested this feature. If both |height|
+% and |width| are chosen, choose the smaller scale factor rather than
+% distort the graphic. This mode is turned on with the
+% \textsf{keepaspectratio} key.
+% \begin{macrocode}
+ \ifGin@iso
+ \ifdim\Gin@scaley\p@>\Gin@scalex\p@
+ \let\Gin@scaley\Gin@scalex
+ \else
+ \let\Gin@scalex\Gin@scaley
+ \fi
+ \fi
+ \Gin@req@width\Gin@scalex\Gin@nat@width
+ \Gin@req@height\Gin@scaley\Gin@nat@height}%
+ \fi
+ \fi
+ \fi
+ \let\Gin@ewidth\Gin@exclamation
+ \let\Gin@eheight\Gin@ewidth}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Gin@req@height}
+% \begin{macro}{\Gin@req@width}
+% The required final size.
+% \begin{macrocode}
+\newdimen\Gin@req@height
+\newdimen\Gin@req@width
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\Gin@outer@scalex}
+% \begin{macro}{\Gin@outer@scaley}
+% Scale factors to pass to |\scalebox|.
+% \begin{macrocode}
+\let\Gin@outer@scalex\relax
+\let\Gin@outer@scaley\relax
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\Gin@angle}
+% Rotation angle.
+% \begin{macrocode}
+\let\Gin@angle\relax
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Gin@ewidth}
+% \changes{v0.6h}{1995/12/06}
+% {Use \cs{Gin@exclamation}}
+% \begin{macro}{\Gin@eheight}
+% Final size, initialised for no scaling.
+% \begin{macrocode}
+\let\Gin@ewidth\Gin@exclamation
+\let\Gin@eheight\Gin@ewidth
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\Gin@scalex}
+% \begin{macro}{\Gin@scaley}
+% \changes{v0.6h}{1995/12/06}
+% {Use \cs{Gin@exclamation}}
+% Scale factors. Initialised for no scaling.
+% \begin{macrocode}
+\def\Gin@scalex{1}
+\let\Gin@scaley\Gin@exclamation
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\Gin@i}
+% Use the same top level |\includegraphics| command as the standard
+% interface. This will set the clipping switch, and then call |\Gin@i|.
+% \changes{v0.3c}{1994/03/15}{Dont locally initialise width/height}
+% \changes{v0.3c}{1994/03/15}{Always call \cmd{\Gin@ii}}
+% \changes{v0.4c}{1994/09/12}{Use `standard' version if two opt.\ args.}
+% \begin{macrocode}
+\def\Gin@i{%
+ \def\Gin@req@sizes{%
+ \Gin@req@height\Gin@nat@height
+ \Gin@req@width\Gin@nat@width}%
+ \@ifnextchar[\Gin@ii{\Gin@ii[]}}
+% \end{macrocode}
+% \end{macro}
+%
+%
+% \begin{macro}{\Gin@ii}
+% Look for a second optional argument.
+% If one optional argument is present, call |\setkeys| to process it,
+% \begin{macrocode}
+\def\Gin@ii[#1]#2{%
+ \def\@tempa{[}\def\@tempb{#2}%
+ \ifx\@tempa\@tempb
+ \def\@tempa{\Gin@iii[#1][}%
+ \expandafter\@tempa
+ \else
+ \begingroup
+ \@tempswafalse
+ \toks@{\Ginclude@graphics{#2}}%
+ \setkeys{Gin}{#1}%
+ \Gin@esetsize
+ \the\toks@
+ \endgroup
+ \fi}
+% \end{macrocode}
+% \end{macro}
+%
+% \changes{v0.4b}{1994/05/06}
+% {Remove incorrect initialisation of \cs{Gin@scalex}}
+%
+% \section{Rotation}
+%
+% \begin{macro}{\rotatebox}
+% Look for an optional argument.
+% \changes{v0.3b}{1994/03/11}{Remove star form}
+% \begin{macrocode}
+\def\rotatebox{%
+ \@ifnextchar[\Grot@box@kv\Grot@box@std}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Grot@box@std}
+% If no KV argument, just repeat the standard definition.
+% \begin{macrocode}
+\def\Grot@box@std#1#2{%
+ \Grot@setangle{#1}%
+ \setbox\z@\hbox{{#2}}%
+ \Grot@x\z@
+ \Grot@y\z@
+ \Grot@box}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\Grot@box@kv}
+% \begin{macrocode}
+\def\Grot@box@kv[#1]#2#3{%
+ \@begin@tempboxa\hbox{#3}%
+ \Grot@x\width \divide\Grot@x\tw@
+ \Grot@y\height \advance\Grot@y-\depth \divide\Grot@y\tw@
+ \setkeys{Grot}{#1}%
+ \setbox\z@\box\@tempboxa
+ \Grot@setangle{#2}%
+ \Grot@box
+ \@end@tempboxa}
+% \end{macrocode}
+% \end{macro}
+%
+%
+% There are two ways of specifying the centre of rotation.
+%
+% \begin{key}{Grot}{origin}
+% |origin=|\meta{label}, where the labels are up to two of |lrctbB|
+% (|B| denotes the baseline, as for PSTricks).
+% \begin{macrocode}
+\define@key{Grot}{origin}[c]{%
+ \@tfor\@tempa:=#1\do{%
+ \if l\@tempa \Grot@x\z@\else
+ \if r\@tempa \Grot@x\width\else
+ \if t\@tempa \Grot@y\height\else
+ \if b\@tempa \Grot@y-\depth\else
+ \if B\@tempa \Grot@y\z@\fi\fi\fi\fi\fi}}
+% \end{macrocode}
+% \end{key}
+%
+% \begin{key}{Grot}{x}
+% \begin{key}{Grot}{y}
+% |x=|\meta{dimen}|,y=|\meta{dimen} The $x,y$ coordinate of the centre
+% of rotation. As usual |\height| etc may be used.
+% \begin{macrocode}
+\define@key{Grot}{x}{\setlength\Grot@x{#1}}
+\define@key{Grot}{y}{\setlength\Grot@y{#1}}
+% \end{macrocode}
+% \end{key}
+% \end{key}
+%
+% \begin{key}{Grot}{units}
+% `units' specifies the number or units in one anti-clockwise circle.
+% So the default is $360$. $-360$ gives clockwise rotation, $6.283185$
+% gives radians etc.
+% \begin{macrocode}
+\define@key{Grot}{units}{%
+ \def\Grot@setangle##1{%
+ \dimen@##1\p@
+ \dimen@ii#1\p@
+ \divide\dimen@ii360\relax
+ \divide\dimen@\dimen@ii
+ \edef\Grot@angle{\number\dimen@}}}
+% \end{macrocode}
+% \end{key}
+%
+% \begin{macro}{\Gin@erotate}
+% Initialise the rotation command to use in |\includegraphics|.
+% \changes{v0.6e}{1995/09/28}{macro added}
+% \begin{macrocode}
+\let\Gin@erotate\Grot@box@std
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macrocode}
+%</package>
+% \end{macrocode}
+%
+% \Finale
+%
diff --git a/Master/texmf-dist/source/latex/graphics/keyval.dtx b/Master/texmf-dist/source/latex/graphics/keyval.dtx
new file mode 100644
index 00000000000..6cc3f169a37
--- /dev/null
+++ b/Master/texmf-dist/source/latex/graphics/keyval.dtx
@@ -0,0 +1,401 @@
+%
+% \iffalse
+%% keyval.dtx Copyright (C) 1993 1994 1995 1997 1998 1999 David Carlisle
+%%
+%% This file is part of the Standard LaTeX `Graphics Bundle'.
+%% It may be distributed under the terms of the LaTeX Project Public
+%% License, as described in lppl.txt in the base LaTeX distribution.
+%% Either version 1.0 or, at your option, any later version.
+%%
+%
+%<*dtx>
+ \ProvidesFile{keyval.dtx}
+%</dtx>
+%<*!plain>
+%<package&!plain>\NeedsTeXFormat{LaTeX2e}
+%<package&!plain>\ProvidesPackage{keyval}
+%<driver> \ProvidesFile{keyval.drv}
+% \fi
+% \ProvidesFile{keyval.dtx}
+ [1999/03/16 v1.13 key=value parser (DPC)]
+%
+% \iffalse
+%</!plain>
+%<*driver>
+\documentclass{ltxdoc}
+\usepackage{keyval}
+\begin{document}
+ \DocInput{keyval.dtx}
+\end{document}
+%</driver>
+% \fi
+%
+% \GetFileInfo{keyval.dtx}
+% \title{The \textsf{keyval} package\thanks{This file
+% has version number \fileversion, last
+% revised \filedate.}}
+% \author{David Carlisle}
+% \date{\filedate}
+% \maketitle
+%
+% \begin{abstract}
+% A \LaTeX\ package implementing a system allowing the setting
+% of parameters (or `named arguments' with a
+% \meta{key}${}={}$\meta{value} syntax.
+%
+% Eg: |\foo[height=3in, shadow = true ]{bar}|
+% \end{abstract}
+%
+% \CheckSum{149}
+%
+% \changes{v1.03}
+% {1993/10/13}{Initial version}
+% \changes{v1.04}{1993/11/15}
+% {Upgrade after comments from Timothy van Zandt}
+% \changes{v1.05}{1993/11/17}
+% {Further small improvements}
+% \changes{v1.06}{1994/02/01}
+% {Update to LaTeX2e}
+% \changes{v1.07}{1994/03/15}
+% {New style ltxdoc}
+% \changes{v1.08}{1994/09/12}
+% {Improve docstrip handling}
+% \changes{v1.09}{1995/09/21}
+% {Move a comma for graphics/1698}
+%
+%
+% This package implements a system of defining and using sets of
+% parameters, which are set using the syntax \meta{key}=\meta{value}.
+%
+% For each keyword in such a set, there exists a function which is
+% called whenever the parameter appears in a parameter list. For
+% instance if the set |dpc| is to have the keyword |scale| then I
+% would define.\\
+% | \define@key{dpc}{scale}{scale ({\tt\string#1})\\}|\\
+% The first argument of |\define@key| is the set of keywords being
+% used, the second is the keyword, and the third is the function to
+% call. This function will be given as |#1| the \meta{value} specified
+% by the user.
+%
+% Normally it is an error to omit the `=\meta{value}' however if an
+% optional \meta{value} is supplied when the keyword is defined, then
+% just the keyword need be supplied.\\
+% |\define@key{dpc}{clip}[true]{...}|\\
+% For `|clip|' you can go `|clip = true|' or `|clip = false|' or
+% just `|clip|', which is the same as `|clip = true|'
+%
+% To use these keywords, just call `|\setkeys|' with a comma
+% separated list of settings, each of the form
+% \meta{key}=\meta{value}, or just \meta{key}. Any white space around
+% the `|=|' and `|,|' is ignored.
+%
+% As the \meta{key} is passed as a macro argument, if it consists
+% entirely of a |{ }| group, the outer braces are stripped off. Thus
+% |,key=foo,| and |,key={foo},| are equivalent. This fact enables one to
+% `hide' any commas or equals signs that must appear in the value. i.e.\
+% in |foo={1,2,3},bar=4|, |foo| gets the value |1,2,3|, the comma after
+% |1| does not terminate the keyval pair, as it is `hidden' by the
+% braces.
+%
+% Empty entries, with nothing between the commas, are silently ignored.
+% This means that it is not an error to have a comma after the last
+% term, or before the first.
+%
+% \section{Example}
+%
+% We may extend the examples above to give a `fake' graphics
+% inclusion macro, with a syntax similar to that used in the psfig
+% macros.
+%
+% \makeatletter
+% \def\dpcgraphics{\@ifnextchar[\@dpcgraphics{\@dpcgraphics[]}}
+%
+% |\dpcgraphics| has one optional argument which is passed through
+% |\setkeys|, and one mandatory argument, the filename. It actually
+% just typesets its arguments, for demonstration.
+%
+% \def\@dpcgraphics[#1]#2{{\setkeys{dpc}{#1}INPUT: #2}}%
+%
+% \define@key{dpc}{scale}{scale ({\tt\string#1\relax})\\}
+% \define@key{dpc}{height}{height ({\tt#1})\\}
+% \define@key{dpc}{width}{width ({\tt#1})\\}
+% \define@key{dpc}{bb}{bounding box ({\tt#1})\\}
+% \define@key{dpc}{clip}[true]{clip ({\tt\string#1\relax})\\}
+% \makeatother
+%
+% The declared keys are: |scale|, |height|, |width|, |bb|,
+% and |clip|. Except for the last, they must all be given a value if
+% used.
+%
+% Note how in the following, any white space arround |=| or |,| is
+% ignored, as are the `empty' arguments caused by extra commas. Note
+% also that each macro receives \emph{exactly} the tokens that you
+% specify as arguments, no premature expansion is done.
+%
+% \begin{verbatim}
+% \def\dpcgraphics{\@ifnextchar[\@dpcgraphics{\@dpcgraphics[]}}
+% \def\@dpcgraphics[#1]#2{{\setkeys{dpc}{#1}INPUT: #2}}
+%
+% \define@key{dpc}{scale}{scale ({\tt\string#1\relax})\\}
+% \define@key{dpc}{clip}[true]{clip ({\tt\string#1\relax})\\}
+% \end{verbatim}
+%
+% \begin{minipage}{.4\textwidth}
+% \begin{verbatim}
+% \def\scalemacro{9}
+% \dpcgraphics
+% [ height =4in, ,
+% width = 3in,
+% scale = \scalemacro,
+% bb = 20 20 300 400 ,
+% clip,
+% ]{aaa}
+% \end{verbatim}
+% \end{minipage}
+% \hfill
+% \begin{minipage}{.4\textwidth}
+% \def\scalemacro{9}
+%\dpcgraphics
+% [ height =4in, ,
+% width = 3in,
+% scale = \scalemacro ,
+% bb = 20 20 300 400 ,
+% clip ,
+% ]{aaa}
+% \end{minipage}
+%
+%
+% \section{The Internal Interface}
+% A declaration of the form:\\
+% |\define@key{family}{key}{...}|\\
+% Defines a macro |\KV@prefix@key| with one argument. When used in a
+% keyval list, the macro receives the value as its argument.
+%
+% A declaration of the form:\\
+% |\define@key{family}{key}[default]{...}|\\
+% Defines a macro |\KV@family@key| as above, however it also defines the
+% macro |\KV@family@key@default| as a macro with no arguments, and
+% definition\\
+% |\KV@family@key{default}|.
+%
+% Thus if macros are defined using |\define@key|, the use of a key with
+% no value \ldots|,foo,|\ldots\ is always equivalent to the use of the
+% key with some value, \ldots|,foo=default,|\ldots. However a package
+% writer may wish that the `default' behaviour for some key is not
+% directly equivalent to using that key with a value. (In particular, as
+% pointed out to me by Timothy Van Zandt, you may wish to omit error
+% checking on the default value as you know it is correct.) In these
+% cases one simply needs to define the two macros
+% |\KV@|\meta{family}|@key| and |\KV@|\meta{family}|@key@default|
+% directly using |\def| (or |\newcommand|). I do not supply a user
+% interface for this type of definition, but it is supported in the
+% sense that I will try to ensure that any future upgrades of this
+% package do not break styles making use of these `low level'
+% definitions.
+%
+% \StopEventually{}
+%
+% \section{The Macros}
+%
+% From version~1.05, all `internal' macros associated to keys have names
+% of the form:\\
+% |\KV@|\meta{family}|@|\meta{key} or
+% |\KV@|\meta{family}|@|\meta{key}|@|\meta{default}
+%
+% \begin{macrocode}
+%<*package>
+% \end{macrocode}
+%
+% \begin{macro}{\setkeys}
+% The top level macro. |#2| should be a comma separated values of the
+% form \meta{key} |=| \meta{value} or just simply \meta{key}.
+% The macro associated with this key in the `family' |#1| is called with
+% argument \meta{value}. The second form is only allowed if the key was
+% declared with a default value.
+% \begin{macrocode}
+\def\setkeys#1#2{%
+% \end{macrocode}
+% Save the `family' for later. Then begin acting on the comma
+% separated list.
+% \changes{v1.11}{1998/06/05}
+% {Make \cs{@tempc} safe (in case it is an \cs{if}.}
+% \begin{macrocode}
+ \def\KV@prefix{KV@#1@}%
+ \let\@tempc\relax
+ \KV@do#2,\relax,}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\KV@do}
+% Iterate down the list of comma separated argument pairs.
+% \begin{macrocode}
+\def\KV@do#1,{%
+ \ifx\relax#1\empty\else
+ \KV@split#1==\relax
+ \expandafter\KV@do\fi}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\KV@split}
+% Split up the keyword and value, and call the appropriate command.
+% This macro was slightly reorganised for version 1.04, after some
+% suggestions from Timothy Van Zandt.
+% \begin{macrocode}
+\def\KV@split#1=#2=#3\relax{%
+ \KV@@sp@def\@tempa{#1}%
+ \ifx\@tempa\@empty\else
+ \expandafter\let\expandafter\@tempc
+ \csname\KV@prefix\@tempa\endcsname
+ \ifx\@tempc\relax
+%<plain> \KV@err
+%<!plain> \KV@errx
+ {\@tempa\space undefined}%
+ \else
+ \ifx\@empty#3\@empty
+ \KV@default
+ \else
+ \KV@@sp@def\@tempb{#2}%
+ \expandafter\@tempc\expandafter{\@tempb}\relax
+ \fi
+ \fi
+ \fi}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\KV@default}
+% Run the default code, or raise an error.
+% \begin{macrocode}
+\def\KV@default{%
+ \expandafter\let\expandafter\@tempb
+ \csname\KV@prefix\@tempa @default\endcsname
+ \ifx\@tempb\relax
+ \KV@err{No value specified for \@tempa}%
+ \else
+ \@tempb\relax
+ \fi}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\KV@err}
+% \changes{v1.10}{1997/11/10}
+% {Use \cs{PackageError}}
+% \changes{v1.12}{1998/11/18}
+% {Option system added}
+% Error messages.
+% \begin{macrocode}
+%<plain>\def\KV@err#1{\errmessage{key-val: #1}}
+%<*!plain>
+\DeclareOption{unknownkeysallowed}{%
+ \def\KV@errx#1{\PackageInfo{keyval}{#1}}}
+\DeclareOption{unknownkeyserror}{%
+ \def\KV@errx#1{\PackageError{keyval}{#1}\@ehc}}
+\ExecuteOptions{unknownkeyserror}
+\let\KV@err\KV@errx
+\ProcessOptions
+%</!plain>
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\KV@@sp@def}
+% \changes{v1.10}{1997/11/10}
+% {Reorganise to not require doubled hash tokens, and to not
+% lose initial brace groups.}
+% \begin{macro}{\KV@@sp@b}
+% \begin{macro}{\KV@@sp@c}
+% \begin{macro}{\KV@@sp@d}
+% |\KV@@sp@def|\meta{cmd}\meta{token list} is like |\def|, except that
+% a space token at the beginning or end of \meta{token list} is
+% removed before making the assignment. \meta{token list} may not
+% contain the token |\@nil|, unless it is within a brace group.
+% The names of these commands were changed at version~1.05 to ensure
+% that they do not clash with `internal' macros in a key family `sp'.
+%
+% Since v1.10, |#| may appear in the second argument without it
+% needing to be doubled as |##|. Also earlier versions would
+% drop any initial brace group, so |{abc}d| would incorrectly
+% be treated as |abcd|. The current version only removes brace
+% groups that surround the entire value, so |{abcd}| \emph{is} treated
+% correctly as |abcd|. In fact, two levels of bracing are removed, if
+% you require the entire argument to be a single brace group, you must
+% use |{{{abcd}}}|.
+%
+% \begin{macrocode}
+\def\@tempa#1{%
+% \end{macrocode}
+%
+% \begin{macrocode}
+\def\KV@@sp@def##1##2{%
+ \futurelet\KV@tempa\KV@@sp@d##2\@nil\@nil#1\@nil\relax##1}%
+% \end{macrocode}
+%
+% Early release removed initial space by having an `extra' argument
+% in |\KV@@sp@b| but that removed too many braces, so now make
+% |\KV@@sp@b| explicitly remove a single space token. That unfortunately
+% means we need the new |\KV@@sp@d| command to add a space token if
+% one was not there before.
+% \begin{macrocode}
+\def\KV@@sp@d{%
+ \ifx\KV@tempa\@sptoken
+ \expandafter\KV@@sp@b
+ \else
+ \expandafter\KV@@sp@b\expandafter#1%
+ \fi}%
+% \end{macrocode}
+%
+% \begin{macrocode}
+\def\KV@@sp@b#1##1 \@nil{\KV@@sp@c##1}%
+% \end{macrocode}
+%
+% \begin{macrocode}
+%<plain>\def\@sptoken{#1}%
+% \end{macrocode}
+%
+% Make the above definitions, inserting the space token where needed.
+% \begin{macrocode}
+ }
+\@tempa{ }
+% \end{macrocode}
+%
+% \begin{macrocode}
+\def\KV@@sp@c#1\@nil#2\relax#3{\KV@toks@{#1}\edef#3{\the\KV@toks@}}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\KV@toks@}
+% Macro register used above to prevent |#| doubling.
+% Avoid uding one of the normal scratch registers, as this code
+% is not in a local group.
+% \begin{macrocode}
+\newtoks\KV@toks@
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\define@key}
+% Define the command associated to the key |#2| in the family |#1|.
+% First looks for a default argument (the default value for the
+% key)
+% \begin{macrocode}
+\def\define@key#1#2{%
+ \@ifnextchar[{\KV@def{#1}{#2}}{\@namedef{KV@#1@#2}####1}}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\KV@def}
+% Make the definitions of the command, and the default value.
+% \begin{macrocode}
+\def\KV@def#1#2[#3]{%
+ \@namedef{KV@#1@#2@default\expandafter}\expandafter
+ {\csname KV@#1@#2\endcsname{#3}}%
+ \@namedef{KV@#1@#2}##1}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macrocode}
+%</package>
+% \end{macrocode}
+% \Finale
+%
+\endinput
diff --git a/Master/texmf-dist/source/latex/graphics/lscape.dtx b/Master/texmf-dist/source/latex/graphics/lscape.dtx
new file mode 100644
index 00000000000..9168ec24425
--- /dev/null
+++ b/Master/texmf-dist/source/latex/graphics/lscape.dtx
@@ -0,0 +1,134 @@
+%
+% \iffalse
+%
+%% lscape.dtx Copyright (C) 1994 1999-2000 David Carlisle
+%%
+%% This file is part of the Standard LaTeX `Graphics Bundle'.
+%% It may be distributed under the terms of the LaTeX Project Public
+%% License, as described in lppl.txt in the base LaTeX distribution.
+%% Either version 1.0 or, at your option, any later version.
+%%
+%<*dtx>
+ \ProvidesFile{lscape.dtx}
+%</dtx>
+%<package>\NeedsTeXFormat{LaTeX2e}[1994/06/01]
+%<package>\ProvidesPackage{lscape}
+%<driver> \ProvidesFile{lscape.drv}
+% \fi
+% \ProvidesFile{lscape.dtx}
+ [2000/10/22 v3.01 Landscape Pages (DPC)]
+%
+% \iffalse
+%<*driver>
+\documentclass{ltxdoc}
+\usepackage{lscape}
+\begin{document}
+ \DocInput{lscape.dtx}
+\end{document}
+%</driver>
+% \fi
+%
+% \GetFileInfo{lscape.dtx}
+%
+% \title{The \textsf{lscape} package\thanks{This file
+% has version number \fileversion, last
+% revised \filedate.}}
+% \author{D. P. Carlisle}
+% \date{\filedate}
+%
+% \CheckSum{69}
+%
+% \begin{landscape}
+% \maketitle
+%
+% All text, within the \texttt{landscape} environment is rotated through
+% 90 degrees. The environment may span several pages. It works well
+% with, and was originally created for, use with \textsf{longtable} to
+% produce long wide tables.
+%
+% All the work is done by the \textsf{graphics} package, the trick is to
+% call it at the right place in the output routine to rotate the current
+% page before the page head and foot are added.
+%
+%
+% \StopEventually{\end{landscape}}
+% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+% \changes{v1.00}{1992/04/28}{Initial release}
+% \changes{v2.00}{1992/11/18}{Support for footnotes and floats.
+% Special thanks to Sarah J. McQuay for testing this release}
+% \changes{v3.00}{1994/10/05}{Update using LaTeX2e graphics package}
+% \changes{v3.01}{1999/06/22}{Added better pdfTeX support
+% by Scott Pakin, from graphics/3063}
+%
+%
+% \begin{macrocode}
+%<*package>
+% \end{macrocode}
+% Here is what Scott Pakin wrote about the pdftex option:
+% \begin{quote}
+% I've made a minor improvement to lscape.dtx that I'd like to share
+% with the world. My addition makes lscape rotate the PDF "paper" --
+% not just the text on the page -- when given the "pdftex" option.
+% (Naturally, this works only with pdfLaTeX.) The result is that the
+% text is viewable online without the reader having to rotate his/her
+% head 90 degrees. The document still prints normally.
+% \end{quote}
+%
+%
+% \begin{macrocode}
+\newif\ifGin@pdftex
+\Gin@pdftexfalse
+\DeclareOption{pdftex}{%
+ \PassOptionsToPackage\CurrentOption{graphics}
+ \Gin@pdftextrue
+}
+\DeclareOption*{\PassOptionsToPackage\CurrentOption{graphics}}
+\ProcessOptions
+\RequirePackage{graphics}
+% \end{macrocode}
+%
+% \begin{macrocode}
+\let\LS@makecol=\@makecol
+\let\LS@makefcolumn=\@makefcolumn
+\def\LS@rot{%
+ \setbox\@outputbox\vbox{\hbox{\rotatebox{90}{\box\@outputbox}}}}
+% \end{macrocode}
+%
+% First set up the page size for landscape.
+% \begin{macrocode}
+\def\landscape{%
+ \clearpage
+ \begingroup
+ \vsize=\textwidth
+ \hsize=\textheight
+ \linewidth=\hsize
+ \columnwidth=\hsize
+ \@colroom=\vsize
+ \textheight=\vsize
+ \@colht=\vsize
+% \end{macrocode}
+% Rotate the page body (text and float pages).
+% \begin{macrocode}
+ \def\@makecol{\LS@makecol\LS@rot}%
+ \def\@makefcolumn##1{\LS@makefcolumn{##1}\LS@rot}}
+% \end{macrocode}
+%
+% Restore everything. This is where the pdftex option makes a
+% difference.
+% \begin{macrocode}
+\def\endlandscape{%
+ \ifGin@pdftex
+ \pdfpageattr{/Rotate 90}
+ \fi
+ \clearpage
+ \endgroup
+ \global\@colht=\textheight
+ \global\vsize=\textheight
+ \global\@colroom=\textheight}
+%</package>
+% \end{macrocode}
+%
+%
+% \Finale
+%
diff --git a/Master/texmf-dist/source/latex/graphics/pstcol.dtx b/Master/texmf-dist/source/latex/graphics/pstcol.dtx
new file mode 100644
index 00000000000..7fba93a1dd1
--- /dev/null
+++ b/Master/texmf-dist/source/latex/graphics/pstcol.dtx
@@ -0,0 +1,159 @@
+%
+% \iffalse
+%
+%% pstcol.dtx Copyright (C) 1994--1996 1999 David Carlisle
+%%
+%% This file is part of the Standard LaTeX `Graphics Bundle'.
+%% It may be distributed under the terms of the LaTeX Project Public
+%% License, as described in lppl.txt in the base LaTeX distribution.
+%% Either version 1.0 or, at your option, any later version.
+%%
+%<*dtx>
+ \ProvidesFile{pstcol.dtx}
+%</dtx>
+%<package>\NeedsTeXFormat{LaTeX2e}
+%<package>\ProvidesPackage{pstcol}
+%<driver> \ProvidesFile{pstcol.drv}
+% \fi
+% \ProvidesFile{pstcol.dtx}
+ [2001/06/20 v1.1 PSTricks color colompatibility (DPC)]
+%
+% \iffalse
+%<*driver>
+\documentclass{ltxdoc}
+\begin{document}
+\DocInput{pstcol.dtx}
+\end{document}
+%</driver>
+% \fi
+%
+% \CheckSum{98}
+%
+% \GetFileInfo{pstcol.dtx}
+%
+% \changes{v0.1}{1994/10/27}
+% {Initial version}
+% \changes{v1.0}{1996/10/28}
+% {Documentation improvements}
+%
+% \title{\textsf{pstcol} package\thanks{This file
+% has version number \fileversion, last
+% revised \filedate.}}
+% \author{David Carlisle}
+% \date{\filedate}
+%
+%
+% \maketitle
+%
+% \begin{abstract}
+% Hopefully temporary package modifying PSTricks colour interface to
+% work with standard LaTeX colours.
+% \end{abstract}
+%
+% \StopEventually{}
+%
+% \begin{macrocode}
+%<*package>
+% \end{macrocode}
+%
+% Require PSTricks
+%%%%%%%%%%%%%%%%%%
+% \begin{macrocode}
+\let\saved@gray\color@gray
+\RequirePackage{pstricks}
+\let\color@gray\saved@gray
+% \end{macrocode}
+%
+% Require Colour
+%%%%%%%%%%%%%%%%
+% \begin{macrocode}
+\DeclareOption*{\PassOptionsToPackage\CurrentOption{color}}
+\ProcessOptions
+\RequirePackage{color}
+% \end{macrocode}
+%
+% Redefine PST access functions in terms of color.sty
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% \begin{macrocode}
+\def\pst@getcolor#1#2{%
+\@ifundefined{\string\color@#1}%
+{\@pstrickserr{Color `#1' not defined}\@eha}%
+ {\edef#2{\expandafter\expandafter\expandafter
+ \c@lor@to@ps\csname\string\color @#1\endcsname\@@}}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+\def\pst@usecolor#1{#1\space}
+% \end{macrocode}
+%
+% Redefine some predefined colors that are in pst but not in color.sty
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% \begin{macrocode}
+\definecolor{darkgray}{gray}{.25}
+\definecolor{gray}{gray}{.5}
+\definecolor{lightgray}{gray}{.75}
+\definecolor{gradbegin}{rgb}{0,1,1}
+\definecolor{gradend}{rgb}{0,.1,.95}
+% \end{macrocode}
+%
+% Redeclare the default colours with the new definitions
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% \begin{macrocode}
+\psset@bordercolor{white}
+\psset@doublecolor{white}
+\psset@linecolor{black}
+\psset@fillcolor{white}
+\psset@hatchcolor{black}
+\psset@gridcolor{black}
+\psset@gridlabelcolor{black}
+\psset@shadowcolor{darkgray}
+\psset@subgridcolor{gray}
+% \end{macrocode}
+%
+%
+% Redefine the PST user-definition commands in terms of |\definecolor|
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% \begin{macrocode}
+\def\newgray#1{%
+ \definecolor{#1}{gray}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+\def\newrgbcolor#1#2{%
+ \newrgbcolorx{#1}#2\@@}
+\def\newrgbcolorx#1#2 #3 #4\@@{%
+ \definecolor{#1}{rgb}{#2,#3,#4}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+\def\newcmykcolor#1#2{%
+ \newcmykcolorx{#1}#2\@@}
+\def\newcmykcolorx#1#2 #3 #4 #5\@@{%
+ \definecolor{#1}{cmyk}{#2,#3,#4,#5}}
+% \end{macrocode}
+%
+% \changes{v1.1}{2001/06/20}{Added redefinitions for PSTricks'
+% predefined color commands (CAR) graphics/3233}
+% Finally, redefine some predefined user commands from pst
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% \begin{macrocode}
+\renewcommand\black {\color{black}}
+\renewcommand\darkgray {\color{darkgray}}
+\renewcommand\gray {\color{gray}}
+\renewcommand\lightgray{\color{lightgray}}
+\renewcommand\white {\color{white}}
+\renewcommand\blue {\color{blue}}
+\renewcommand\red {\color{red}}
+\renewcommand\green {\color{green}}
+\renewcommand\yellow {\color{yellow}}
+\renewcommand\magenta {\color{magenta}}
+\renewcommand\cyan {\color{cyan}}
+% \end{macrocode}
+%
+% \begin{macrocode}
+%</package>
+% \end{macrocode}
+%
+% \Finale
+%
+
diff --git a/Master/texmf-dist/source/latex/graphics/trig.dtx b/Master/texmf-dist/source/latex/graphics/trig.dtx
new file mode 100644
index 00000000000..8540ec3dee7
--- /dev/null
+++ b/Master/texmf-dist/source/latex/graphics/trig.dtx
@@ -0,0 +1,308 @@
+% \iffalse
+%% File: trig.dtx Copyright (C) 1993 1994 1995 1996 1997 1999 David Carlisle
+%%
+%% This file is part of the Standard LaTeX `Graphics Bundle'.
+%% It may be distributed under the terms of the LaTeX Project Public
+%% License, as described in lppl.txt in the base LaTeX distribution.
+%% Either version 1.0 or, at your option, any later version.
+%%
+%
+%<*dtx>
+ \ProvidesFile{trig.dtx}
+%</dtx>
+%<*!plain>
+%<package&!plain>\NeedsTeXFormat{LaTeX2e}
+%<package&!plain>\ProvidesPackage{trig}
+%<driver> \ProvidesFile{trig.drv}
+% \fi
+% \ProvidesFile{trig.dtx}
+ [1999/03/16 v1.09 sin cos tan (DPC)]
+%
+% \iffalse
+%</!plain>
+%<*driver>
+\documentclass{ltxdoc}
+\usepackage{trig}
+\begin{document}
+ \DocInput{trig.dtx}
+\end{document}
+%</driver>
+% \fi
+%
+% \GetFileInfo{trig.dtx}
+% \title{The \textsf{trig} package\thanks{This file
+% has version number \fileversion, last
+% revised \filedate.}}
+% \author{David Carlisle}
+% \date{\filedate}
+% \maketitle
+%
+% \CheckSum{246}
+%
+% \changes{v1.00}{1993/00/00}{Undocumented versions}
+% \changes{v1.05}{1993/10/07}{Documented, added tan}
+% \changes{v1.06}{1994/02/01}{Update for LaTeX2e}
+% \changes{v1.07}{1994/03/15}{Use ltxdoc}
+% \changes{v1.08}{1994/10/16}{Change \cs{@xc} to \cs{nin@ty}}
+%
+% \section{Introduction}
+%
+% These macros implement the trigonometric functions, sin, cos and tan.
+% In each case two commands are defined. For instance the command
+% |\CalculateSin{33}| may be isued at some point, and then anywhere
+% later in the document, the command |\UseSin{33}| will return the
+% decimal expansion of $\sin(33^\circ)$.
+%
+% The arguments to these macros do not have to be whole numbers,
+% although in the case of whole numbers, \LaTeX\ or plain \TeX\ counters
+% may be used. In \TeX{}Book syntax, arguments must be of type:
+% \meta{optional signs}\meta{factor}
+%
+% Some other examples are:\\
+% |\CalculateSin{22.5}|, |\UseTan{\value{mycounter}}|,
+% |\UseCos{\count@}|.
+%
+% Note that unlike the psfig macros, these save all previously
+% computed values. This could easily be changed, but I thought that in
+% many applications one would want many instances of the
+% same value. (eg rotating all the headings of a table by the
+% \emph{same} amount).
+%
+% I don't really like this need to pre-calculate the values, I
+% originally implemented |\UseSin| so that it automatically calculated
+% the value if it was not pre-stored. This worked fine in testing, until
+% I remembered why one needs these values. You want to be able to say
+% |\dimen2=\UseSin{30}\dimen0|. Which means that |\UseSin| must
+% \emph{expand} to a \meta{factor}.
+%
+% \StopEventually{}
+%
+% \section{The Macros}
+%
+% \begin{macrocode}
+%<*package>
+% \end{macrocode}
+%
+% \begin{macro}{\nin@ty}\begin{macro}{\@clxx}
+% \begin{macro}{\@lxxi}\begin{macro}{\@mmmmlxviii}
+% Some useful constants for converting between degrees and radians.
+% $$\frac{\pi}{180}\simeq\frac{355}{113\times180}=\frac{71}{4068}$$
+% \begin{macrocode}
+\chardef\nin@ty=90
+\chardef\@clxx=180
+\chardef\@lxxi=71
+\mathchardef\@mmmmlxviii=4068
+% \end{macrocode}
+% \end{macro}\end{macro}\end{macro}\end{macro}
+%
+% The approximation to $\sin$. I experimented with various
+% approximations based on Tchebicheff polynomials, and also some
+% approximations from a SIAM handbook `Computer Approximations' However
+% the standard Taylor series seems sufficiently accurate, and used by
+% far the fewest \TeX\ tokens, as the coefficients are all rational.
+% \begin{eqnarray*}
+% \sin(x)& \simeq& x - (1/3!)x^3 + (1/5!)x^5 - (1/7!)x^7 + (1/9!)x^9\\
+% &\simeq&\frac{((((7!/9!x^2-7!/7!)x^2+7!/5!)x^2 +7!/3!)x^2+7!/1!)x}
+% {7!}\\
+% &=&\frac{((((1/72x^2-1)x^2+42)x^2 +840)x^2+5040)x}
+% {5040}
+% \end{eqnarray*}
+% The nested form used above reduces the number of operations required.
+% In order to further reduce the number of operations, and more
+% importantly reduce the number of tokens used, we can precompute the
+% coefficients. Note that we can not use $9!$ as the denominator as
+% this would cause overflow of \TeX's arithmetic.
+% \begin{macro}{\@coeffz}\begin{macro}{\@coeffa}\begin{macro}{\@coeffb}
+% \begin{macro}{\@coeffc}\begin{macro}{\@coeffd}
+% Save the coefficients as |\|(|math|)|char|s.
+% \begin{macrocode}
+\chardef\@coeffz=72
+%\chardef\@coefa=1
+\chardef\@coefb=42
+\mathchardef\@coefc=840
+\mathchardef\@coefd=5040
+% \end{macrocode}
+% \end{macro}\end{macro}\end{macro}\end{macro}\end{macro}
+%
+% \begin{macro}{\TG@rem@pt}
+% The standard trick of getting a real number out of a \meta{dimen}.
+% This gives a maximum accuracy of approx.\ 5 decimal places, which
+% should be sufficient. It puts a space after the number, perhaps it
+% shouldn't.
+% \begin{macrocode}
+{\catcode`t=12\catcode`p=12\gdef\noPT#1pt{#1}}
+\def\TG@rem@pt#1{\expandafter\noPT\the#1\space}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\TG@term}
+% Compute one term of the above nested series. Multiply the previous sum
+% by $x^2$ (stored in |\@tempb|, then add the next coefficient, |#1|.
+% \begin{macrocode}
+\def\TG@term#1{%
+ \dimen@\@tempb\dimen@
+ \advance\dimen@ #1\p@}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\TG@series}
+% Compute the above series. the value in degrees will be in |\dimen@|
+% before this is called.
+% \begin{macrocode}
+\def\TG@series{%
+ \dimen@\@lxxi\dimen@
+ \divide \dimen@ \@mmmmlxviii
+% \end{macrocode}
+% |\dimen@| now contains the angle in radians, as a \meta{dimen}. We
+% need to remove the units, so store the same value as a \meta{factor}
+% in |\@tempa|.
+% \begin{macrocode}
+ \edef\@tempa{\TG@rem@pt\dimen@}%
+% \end{macrocode}
+% Now put $x^2$ in |\dimen@| and |\@tempb|.
+% \begin{macrocode}
+ \dimen@\@tempa\dimen@
+ \edef\@tempb{\TG@rem@pt\dimen@}%
+% \end{macrocode}
+% The first coefficient is $1/72$.
+% \begin{macrocode}
+ \divide\dimen@\@coeffz
+ \advance\dimen@\m@ne\p@
+ \TG@term\@coefb
+ \TG@term{-\@coefc}%
+ \TG@term\@coefd
+% \end{macrocode}
+% Now the cubic in $x^2$ is completed, so we need to multiply by $x$ and
+% divide by $7!$.
+% \begin{macrocode}
+ \dimen@\@tempa\dimen@
+ \divide\dimen@ \@coefd}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\CalculateSin}
+% If this angle has already been computed, do nothing, else store the
+% angle, and call |\TG@@sin|.
+% \begin{macrocode}
+\def\CalculateSin#1{{%
+ \expandafter\ifx\csname sin(\number#1)\endcsname\relax
+ \dimen@=#1\p@\TG@@sin
+ \expandafter\xdef\csname sin(\number#1)\endcsname
+ {\TG@rem@pt\dimen@}%
+ \fi}}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\CalculateCos}
+% As above, but use the relation $\cos(x) = \sin(90-x)$.
+% \begin{macrocode}
+\def\CalculateCos#1{{%
+ \expandafter\ifx\csname cos(\number#1)\endcsname\relax
+ \dimen@=\nin@ty\p@
+ \advance\dimen@-#1\p@
+ \TG@@sin
+ \expandafter\xdef\csname cos(\number#1)\endcsname
+ {\TG@rem@pt\dimen@}%
+ \fi}}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\TG@reduce}
+% Repeatedly use one of the the relatations
+% $\sin(x)=\sin(180-x)=\sin(-180-x)$ to get $x$ in the range $-90 \leq
+% x\leq 90$. Then call |\TG@series|.
+% \begin{macrocode}
+\def\TG@reduce#1#2{%
+\dimen@#1#2\nin@ty\p@
+ \advance\dimen@#2-\@clxx\p@
+ \dimen@-\dimen@
+ \TG@@sin}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\TG@@sin}
+% Slightly cryptic, but it seems to work\ldots
+% \begin{macrocode}
+\def\TG@@sin{%
+ \ifdim\TG@reduce>+%
+ \else\ifdim\TG@reduce<-%
+ \else\TG@series\fi\fi}%
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\UseSin}
+% \begin{macro}{\UseCos}
+% Use a pre-computed value.
+% \begin{macrocode}
+\def\UseSin#1{\csname sin(\number#1)\endcsname}
+\def\UseCos#1{\csname cos(\number#1)\endcsname}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% A few shortcuts to save space.
+% \begin{macrocode}
+\chardef\z@num\z@
+\expandafter\let\csname sin(0)\endcsname\z@num
+\expandafter\let\csname cos(0)\endcsname\@ne
+\expandafter\let\csname sin(90)\endcsname\@ne
+\expandafter\let\csname cos(90)\endcsname\z@num
+\expandafter\let\csname sin(-90)\endcsname\m@ne
+\expandafter\let\csname cos(-90)\endcsname\z@num
+\expandafter\let\csname sin(180)\endcsname\z@num
+\expandafter\let\csname cos(180)\endcsname\m@ne
+% \end{macrocode}
+%
+% \begin{macro}{\CalculateTan}
+% Originally I coded the Taylor series for tan, but it seems to be
+% more accurate to just take the ratio of the sine and cosine.
+% This is accurate to 4 decimal places for angles up to
+% $50^\circ$, after that the accuracy tails off, giving
+% 57.47894 instead of 57.2900 for $89^\circ$.
+% \begin{macrocode}
+\def\CalculateTan#1{{%
+ \expandafter\ifx\csname tan(\number#1)\endcsname\relax
+ \CalculateSin{#1}%
+ \CalculateCos{#1}%
+ \@tempdima\UseCos{#1}\p@
+ \divide\@tempdima\@iv
+ \@tempdimb\UseSin{#1}\p@
+ \@tempdimb\two@fourteen\@tempdimb
+ \divide\@tempdimb\@tempdima
+ \expandafter\xdef\csname tan(\number#1)\endcsname
+ {\TG@rem@pt\@tempdimb}%
+ \fi}}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\UseTan}
+% Just like |\UseSin|.
+% \begin{macrocode}
+\def\UseTan#1{\csname tan(\number#1)\endcsname}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\two@fourteen}
+% \begin{macro}{\@iv}
+% two constants needed to keep the division within \TeX's range.
+% \begin{macrocode}
+\mathchardef\two@fourteen=16384
+\chardef\@iv=4
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% Predefine $\tan(\pm90)$ to be an error.
+% \begin{macrocode}
+\expandafter\def\csname tan(90)\endcsname{\errmessage{Infinite tan !}}
+\expandafter\let\csname tan(-90)\expandafter\endcsname
+ \csname tan(90)\endcsname
+% \end{macrocode}
+%
+% \begin{macrocode}
+%</package>
+% \end{macrocode}
+%
+% \Finale
+%
+\endinput
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 19:28:11 +0000