summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/source/latex/cals
diff options
context:
space:
mode:
Diffstat (limited to 'Master/texmf-dist/source/latex/cals')
-rw-r--r--Master/texmf-dist/source/latex/cals/cals.dtx168
-rw-r--r--Master/texmf-dist/source/latex/cals/cals.ins62
-rw-r--r--Master/texmf-dist/source/latex/cals/cell.dtx314
-rw-r--r--Master/texmf-dist/source/latex/cals/colsep.dtx126
-rw-r--r--Master/texmf-dist/source/latex/cals/decor.dtx227
-rw-r--r--Master/texmf-dist/source/latex/cals/lltokens.dtx170
-rw-r--r--Master/texmf-dist/source/latex/cals/rowsep.dtx360
-rw-r--r--Master/texmf-dist/source/latex/cals/span.dtx176
-rw-r--r--Master/texmf-dist/source/latex/cals/table.dtx387
9 files changed, 1990 insertions, 0 deletions
diff --git a/Master/texmf-dist/source/latex/cals/cals.dtx b/Master/texmf-dist/source/latex/cals/cals.dtx
new file mode 100644
index 00000000000..e0ae6dbac16
--- /dev/null
+++ b/Master/texmf-dist/source/latex/cals/cals.dtx
@@ -0,0 +1,168 @@
+% \iffalse meta-comment
+%
+% Copyright (C) 2010 by Oleg Parashchenko <olpa@uucode.com>
+% -------------------------------------------------------
+%
+% This file may be distributed and/or modified under the
+% conditions of the LaTeX Project Public License, either version 1.2
+% of this license or (at your option) any later version.
+% The latest version of this license is in:
+%
+% http://www.latex-project.org/lppl.txt
+%
+% and version 1.2 or later is part of all distributions of LaTeX
+% version 1999/12/01 or later.
+%
+% \fi
+%
+% \iffalse
+%<*driver>
+\ProvidesFile{cals.dtx}
+%</driver>
+%<package>\NeedsTeXFormat{LaTeX2e}[1999/12/01]
+%<package>\ProvidesPackage{cals}
+%<*package>
+ [2010/10/07 CALS tables v.2.0]
+%</package>
+%
+%<*driver>
+\documentclass{ltxdoc}
+\usepackage{hyperref}
+\EnableCrossrefs
+\CodelineIndex
+\RecordChanges
+\begin{document}
+ \DocInput{cals.dtx}
+ \PrintChanges
+ \PrintIndex
+\end{document}
+%</driver>
+% \fi
+%
+% \CheckSum{0}
+%
+% \CharacterTable
+% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+% Digits \0\1\2\3\4\5\6\7\8\9
+% Exclamation \! Double quote \" Hash (number) \#
+% Dollar \$ Percent \% Ampersand \&
+% Acute accent \' Left paren \( Right paren \)
+% Asterisk \* Plus \+ Comma \,
+% Minus \- Point \. Solidus \/
+% Colon \: Semicolon \; Less than \<
+% Equals \= Greater than \> Question mark \?
+% Commercial at \@ Left bracket \[ Backslash \\
+% Right bracket \] Circumflex \^ Underscore \_
+% Grave accent \` Left brace \{ Vertical bar \|
+% Right brace \} Tilde \~}
+%
+%
+% \changes{v2.0}{2010/10/08}{Complete rewrite with different approach}
+% \changes{v1.0}{2010/06/17}{Initial version from skeleton.dtx}
+%
+% \GetFileInfo{cals.dtx}
+%
+% \DoNotIndex{\newcommand,\newenvironment}
+%
+%
+% \title{The \textsf{cals} package\thanks{This document
+% corresponds to \textsf{cals}~\fileversion, dated \filedate.}}
+% \author{Oleg Parashchenko \\ \texttt{olpa@uucode.com}}
+%
+% \maketitle
+%
+% \section{Introduction}
+%
+% The |cals| package is a set of macros to typeset multipage tables
+% with repeatable headers and footers, with cells spanned over
+% rows and columns. Decorations are supported: padding, background
+% color, width of separation rules. The code is compatible with
+% multicols and pdfsync.
+%
+% The work is released to public (\LaTeX{} license)
+% by \url{bitplant.de}~GmbH, a company which provides technical
+% documentation services to industry.
+%
+% \section{Usage}
+%
+% An users' guide is a separate document, yet to be written.
+% I'll do it for TUGboat 2011:1. At the moment, as a substitute,
+% use the demo document provided with the package. The most
+% important feature: the table (its rows) must start in a vertical
+% mode, the cells content should switch to a horizontal mode.
+%
+% Please post questions and suggestions to the newsgroup
+% |comp.text.tex| and the |texhax| mailing list (see
+% \url{http://tug.org/mailman/listinfo/texhax}),
+% not directly to me.
+%
+% Summary of the user interface:
+% \begin{verbatim}
+% \begin{calstable}
+% \colwidths{{100pt}{200pt}}
+% \brow \cell{a} \cell{b} \erow
+% \end{calstable}
+% \end{verbatim}
+%
+% Table elements: |\thead|, |\tfoot|, |\tbreak{\penalty-10000}|, |\lastrule|.
+%
+% Alignment: |\alignL|, |\alignC|, |\alignR|, |\vfill|.
+%
+% Padding: lengths |\cals@paddingL| (|...T,R,B|), set by |\cals@setpadding{Ag}|,
+% baseline alignment |\cals@paddingD|, set by |\cals@setcellprevdepth{Al}|.
+%
+% Color: |\cals@bgcolor|.
+%
+% Rules: |\cals@cs@width|, |\cals@framecs@width|, |\cals@rs@width|,
+% |\cals@framers@width|, |\cals@bodyrs@width|. Overrides:
+% |\cals@borderL| (|...T,R,B|).
+%
+% Hooks: |\cals@AtBeginCell|, |\cals@AtEndCell|.
+%
+% Spanning: |\nullcell|, |\spancontent|.
+%
+% \StopEventually{}
+%
+% \section{Implementation}
+%
+% What happens. |\cell| creates a table cell, puts it to the
+% current row and updates decorations. At the end of the row
+% (|\erow|) we have the box |\cals@current@row|, the box
+% |\cals@current@cs|---column separation and cells background---and
+% the macros |\cals@current@rs@above| and |\cals@current@rs@below|---all
+% the required data to typeset row separation.
+% Before dispatching the row, all the cells are repacked
+% to the common height. The row dispatcher (|\cals@row@dispatch|)
+% usually just uses |\cals@issue@row|, which
+% outputs |current@cs|, then joins the previous row |cs@below| with the
+% current row |rs@above| and typesets the resulting row separation, and
+% finally prints the row itself. If a table break is required, the
+% dispatcher backups the current row and first typesets the table footer,
+% a page break and the table header. In case of a row span, the set
+% of the rows is converted to one big row.
+%
+% I tried to code as good and robust as I can. In particular,
+% the package contains unit tests. However, being an unexperienced
+% \TeX{} programmer, I could write bad code, especially in the section
+% ``List list of tokens''. Do not hesitate to send me suggestions
+% and corrections, also in the use of English.
+%
+% The description is split on two parts: main functionality and
+% decorations. The first part is bottom-up: creating cells,
+% collecting cells to a row, dispatching a row, top-level table
+% elements. The second part starts with the common code,
+% then explains in-row decorations (column separation and cells
+% background) and between-row decorations (row separation).
+%
+% \input{cell.dtx}
+% \input{span.dtx}
+% \input{table.dtx}
+% \input{lltokens.dtx}
+% \input{decor.dtx}
+% \input{colsep.dtx}
+% \input{rowsep.dtx}
+
+%
+% \Finale
+\endinput
diff --git a/Master/texmf-dist/source/latex/cals/cals.ins b/Master/texmf-dist/source/latex/cals/cals.ins
new file mode 100644
index 00000000000..6c85c8f34e4
--- /dev/null
+++ b/Master/texmf-dist/source/latex/cals/cals.ins
@@ -0,0 +1,62 @@
+%%
+%% Copyright (C) 2004 by Oleg Parashchenko <olpa@uucode.com>
+%%
+%% This file may be distributed and/or modified under the conditions of
+%% the LaTeX Project Public License, either version 1.2 of this license
+%% or (at your option) any later version. The latest version of this
+%% license is in:
+%%
+%% http://www.latex-project.org/lppl.txt
+%%
+%% and version 1.2 or later is part of all distributions of LaTeX version
+%% 1999/12/01 or later.
+%%
+
+\input docstrip.tex
+\keepsilent
+
+\preamble
+
+This is a generated file.
+
+Copyright (C) 2004 by Oleg Parashchenko <olpa@uucode.com>
+
+This file may be distributed and/or modified under the conditions of
+the LaTeX Project Public License, either version 1.2 of this license
+or (at your option) any later version. The latest version of this
+license is in:
+
+ http://www.latex-project.org/lppl.txt
+
+and version 1.2 or later is part of all distributions of LaTeX version
+1999/12/01 or later.
+
+\endpreamble
+
+\generate{\file{cals.sty}{
+ \from{cals.dtx}{package}
+ \from{cell.dtx}{package}
+ \from{span.dtx}{package}
+ \from{table.dtx}{package}
+ \from{lltokens.dtx}{package}
+ \from{decor.dtx}{package}
+ \from{colsep.dtx}{package}
+ \from{rowsep.dtx}{package}
+ }}
+
+\obeyspaces
+\Msg{*************************************************************}
+\Msg{* *}
+\Msg{* To finish the installation you have to move the following *}
+\Msg{* file into a directory searched by TeX: *}
+\Msg{* *}
+\Msg{* cals.sty *}
+\Msg{* *}
+\Msg{* To produce the documentation run the file skeleton.dtx *}
+\Msg{* through LaTeX. *}
+\Msg{* *}
+\Msg{* Happy TeXing! *}
+\Msg{* *}
+\Msg{*************************************************************}
+
+\endbatchfile
diff --git a/Master/texmf-dist/source/latex/cals/cell.dtx b/Master/texmf-dist/source/latex/cals/cell.dtx
new file mode 100644
index 00000000000..1d72f279557
--- /dev/null
+++ b/Master/texmf-dist/source/latex/cals/cell.dtx
@@ -0,0 +1,314 @@
+% \subsection{Creating cells}
+
+% \begin{macro}{\cals@cell}
+% \begin{macro}{\cals@cell@end}
+% Creates an individual cell before socialization into a table.
+% Content of the cell is typeset inside a group.
+% Execution continues in |\cals@celll@end|. Parameters:
+% \begin{enumerate}
+% \item Width of the cell
+% \item Vertical correction: when we have a rowspan, the cell is created while processing the last row. The vertical correction is required to raise the text back to the first row of the rowspan.
+% \item (Implicit parameter.) Content. It is important that it contains a switch to the horizontal mode, otherwise horizontal dimensions of the cell will be incorrect.
+% \end{enumerate}
+% Using an implicit parameter instead of putting it to a macro
+% parameter is probably a premature optimization.
+%
+%
+% \begin{macrocode}
+\newcommand\cals@cell[3]{}
+\def\cals@cell#1#2{%
+% \end{macrocode}
+%
+% Start immediately with |\vbox| to allow |\setbox0=\cals@cell{...}|
+% construction. Later, white integrating the cell into
+% a row, the content will be unvboxed and put to a vbox
+% of the row height.
+%
+% \begin{macrocode}
+\vbox\bgroup%
+% \end{macrocode}
+%
+% Implicitely sets the width and the horizontal paddings
+% of the cell. These settings come into effect on
+% switch from the restricted vertical mode (our |\vbox|) to
+% the horizontal mode. Therefore, the content must force such
+% switch, otherwise the code fails.
+%
+% \begin{macrocode}
+\hsize=#1
+\linewidth=#1
+\leftskip=\cals@paddingL %
+\rightskip=\cals@paddingR %
+% \end{macrocode}
+%
+% Vertical correction and top padding
+%
+% \begin{macrocode}
+\ifdim #2>0pt %
+ \vskip-#2
+\fi
+\vskip\cals@paddingT %
+% \end{macrocode}
+%
+% Tuning the top padding. First, compensate the |\parskip|,
+% which appears on the mode switch. Second, adjusts baselineskip,
+% so in the case of the right preliminimary setup, the top of the
+% letters "Al" touches the padding border. Meanwhile, setting
+% prevdepth aligns the baselines of the first text lines
+% of the row cells.
+%
+% \begin{macrocode}
+\vskip-\parskip %
+\prevdepth=\cals@paddingD %
+% \end{macrocode}
+%
+% Finally, the content. And the switch to the horizontal mode (we hope).
+%
+% We want more work afrer typesetting the content, but it is not
+% desirable to collect all the tokens. Instead, start a group and use
+% |\aftergroup| to finish typesetting. For more explanations, see
+% ``\TeX{} by Topic'', Chapter 12 ``Expansion''.
+%
+% \begin{macrocode}
+\bgroup\aftergroup\cals@cell@end
+\cals@AtBeginCell\let\next=% eat '{' of the content
+}%{Implicit content}
+
+% \end{macrocode}
+%
+% The infinite glue before the bottom padding is useful later,
+% when we will re-height the cells in a row.
+%
+% \begin{macrocode}
+\def\cals@cell@end{\vfil\vskip\cals@paddingB
+\cals@AtEndCell\egroup % finish vbox
+% \end{macrocode}
+% Call the caller
+% \begin{macrocode}
+\cals@celll@end}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+
+% \begin{macro}{\cell}
+% Creates a cell and appends it to the hbox |\cals@current@row|.
+% \begin{macrocode}
+\newcommand\cell[1]{}
+\def\cell{%
+% \end{macrocode}
+% Get the width of the cell and typeset it to the box 0.
+% The execution flow is: |\cell| to |\cals@cell|
+% to |\cals@cell@end| to |\cals@celll@end|.
+% \begin{macrocode}
+\llt@rot\cals@colwidths
+\let\cals@cell@width=\llt@car
+\setbox0=\cals@cell\cals@cell@width{0pt}%
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\cals@AtBeginCell}
+% \begin{macro}{\cals@AtEndCell}
+% Additional code to be executed at the begin and at the end
+% of a cell. An use case is a hook for pdfsync:
+% |\def\cals@AtBeginCell{\pdfsyncstart}|. I am not sure if the end-hook
+% is useful because all the changes are local for the cell group,
+% but decided to retain it for symmetry.
+% \begin{macrocode}
+\let\cals@AtBeginCell=\relax
+\let\cals@AtEndCell=\relax
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+
+% \begin{macro}{\cals@width@cell@put@row}
+% Implicit setting of the cell width can fail (example is an empty cell).
+% In this case, force the width explicitely. Then put the cell
+% to the current row. This code should be a part of |\cals@celll@end|,
+% but due to |\spancontent| is in a separate macro.
+% \begin{macrocode}
+\newcommand\cals@width@cell@put@row{%
+\ifdim \cals@cell@width=\wd0 \relax \else \wd0=\cals@cell@width \fi
+\setbox\cals@current@row=\hbox{\unhbox\cals@current@row\box0 }}%
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\cals@celll@end}
+% After a cell is typeset to the box 0, execution continues here
+% (see notes to |\cell|). Update the current row and its decorations.
+% \begin{macrocode}
+\newcommand\cals@celll@end{%
+\cals@width@cell@put@row
+\cals@decor@next\cals@cell@width}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\spancontent}
+% Typesets a spanned cell (the content is in the implicit argument)
+% and puts it to the current row.
+% The width and height correction are
+% already calculated, the decorations are also already added.
+% \begin{macrocode}
+\newcommand\spancontent[1]{}
+\def\spancontent{%
+\let\cals@tmp=\cals@celll@end
+\let\cals@cell@width=\cals@span@width
+\def\cals@celll@end{%
+ \cals@width@cell@put@row%
+ \let\cals@celll@end=\cals@tmp}%
+\setbox0=\cals@cell{\cals@span@width}{\cals@span@height}%
+}%{Implicit content}
+% \end{macrocode}
+% \end{macro}
+
+% \subsubsection{Cell padding}
+
+% \begin{macro}{\cals@setpadding}
+% \begin{macro}{\cals@paddingL}
+% \begin{macro}{\cals@paddingR}
+% \begin{macro}{\cals@paddingT}
+% \begin{macro}{\cals@paddingB}
+%
+% Calculates and sets the cell padding. It seems that a good value
+% is the half of the font size, calculated as the full height of
+% a box with the content \#1. The calstable environment uses
+% the letters ``Ag''.
+%
+% \begin{macrocode}
+\newskip\cals@paddingL
+\newskip\cals@paddingR
+\newskip\cals@paddingT
+\newskip\cals@paddingB
+
+\newcommand{\cals@setpadding}[1]{%
+\setbox0=\hbox{#1}%
+\dimen0=\ht0 \advance\dimen0 by \dp0 \divide\dimen0 by 2
+\cals@paddingL=\dimen0 \relax
+\cals@paddingR=\cals@paddingL
+\cals@paddingT=\cals@paddingL
+\cals@paddingB=\cals@paddingL
+}
+% \end{macrocode}
+% \end{macro}\end{macro}\end{macro}\end{macro}\end{macro}
+
+% \begin{macro}{\cals@setcellprevdepth}
+% \begin{macro}{\cals@paddingD}
+% The function |\cals@cell| uses the
+% length |\cals@paddingD| to tune the top padding. The macro
+% |\cals@setcellprevdepth| calculates and sets this parameter,
+% so that a box with the content \#1 touches the padding border.
+% The calstable environment uses the letters ``Al''.
+%
+% \begin{macrocode}
+\newdimen\cals@paddingD
+
+\newcommand{\cals@setcellprevdepth}[1]{%
+\setbox0=\vbox{\prevdepth=0pt #1}%
+\setbox1=\vbox{#1}%
+\dimen0=\ht0 \advance\dimen0 by \dp0 %
+\advance\dimen0 by -\ht1 \advance\dimen0 by -\dp1%
+\cals@paddingD=\dimen0 }
+% \end{macrocode}
+% \end{macro}\end{macro}
+
+% \begin{macro}{\alignL}
+% \begin{macro}{\alignC}
+% \begin{macro}{\alignR}
+% To align the table cell text left, center or right we add or
+% remove vfill-part of the left and right padding. Executed
+% by assigning skip to dimen.
+% \begin{macrocode}
+\newcommand\alignL{%
+\dimen0=\cals@paddingL \cals@paddingL=\dimen0 \relax
+\dimen0=\cals@paddingR \cals@paddingR=\dimen0 \relax}
+
+\newcommand\alignC{%
+\dimen0=\cals@paddingL \cals@paddingL=\dimen0 plus 1fill\relax
+\dimen0=\cals@paddingR \cals@paddingR=\dimen0 plus 1fill\relax}
+
+\newcommand\alignR{%
+\dimen0=\cals@paddingL \cals@paddingL=\dimen0 plus 1fill\relax
+\dimen0=\cals@paddingR \cals@paddingR=\dimen0 \relax}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+
+% \subsection{From cells to a row}
+
+% \begin{macro}{\cals@current@row}
+% Rows are first typeset to this hbox.
+% \begin{macrocode}
+\newbox\cals@current@row
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\colwidths}
+% \begin{macro}{\cals@colwidths}
+% The macro |\cals@colwidths| contains a list of column widths.
+% The user sets it through the API macro |\colwidths|, which performs
+% expansion. The list is alive, it is rotated after a cell is finished,
+% so the width of the next cell is always the first element.
+% \begin{macrocode}
+\newcommand\colwidths[1]{}
+\def\colwidths#{\edef\cals@colwidths}
+\def\cals@colwidths{{100pt}}
+% \end{macrocode}
+% \end{macro}\end{macro}
+
+% Initially, I planned to use |\row{...}| to create a row.
+% In order to perform actions at the end of the row I used
+% the aftergroup-trick, like for |\cell| command. Unfortunately,
+% the decorations were lost after the
+% group finished. I tried to save them to global temporary
+% macros at the end of each cell, but the saving list was big.
+% Finally, I decided that the construction |\brow...\erow|
+% is much easier to implement.
+
+% \begin{macro}{\brow}
+% Starts a row. Resets the rowspan markers, |\cals@current@row|
+% and decorations.
+% \begin{macrocode}
+\newcommand\brow{%
+\cals@updateRspanMarkers
+\setbox\cals@current@row=\hbox{}%
+\cals@decor@begin}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\erow}
+% Finishes a row. All the cells are re-layouted to the row height.
+% Decorations are finalized, and the row is dispatched.
+% \begin{macrocode}
+\newcommand\erow{%
+\cals@reheight@cells\cals@current@row
+\cals@last@row@height=\ht\cals@current@row\relax
+\cals@decor@end\cals@lastWidth
+\ht\cals@current@cs=\ht\cals@current@row
+\cals@row@dispatch
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\cals@reheight@cells}
+% Re-heights all the boxes of a row.
+% Retains the widths of these boxes.
+% \begin{macrocode}
+\newcommand\cals@reheight@cells[1]{%
+\dimen0=\ht#1\relax
+\setbox2=\hbox{}%
+\def\next{%
+ \setbox4=\lastbox
+ \ifvoid4
+ \def\next{\global\setbox2=\box2}%
+ \else
+ \dimen4=\wd4
+ \setbox4=\vbox to \dimen0{\unvbox4}%
+ \ifdim \dimen4=\wd4 \relax \else \wd4=\dimen4 \fi
+ \setbox2=\hbox{\box4\unhbox2 }%
+ \fi
+ \next}%
+\setbox0=\hbox{\unhbox#1\next}%
+\setbox#1=\box2 }
+% \end{macrocode}
+% \end{macro}
diff --git a/Master/texmf-dist/source/latex/cals/colsep.dtx b/Master/texmf-dist/source/latex/cals/colsep.dtx
new file mode 100644
index 00000000000..d69222bee6e
--- /dev/null
+++ b/Master/texmf-dist/source/latex/cals/colsep.dtx
@@ -0,0 +1,126 @@
+% \subsection{Column separation (colsep) and cell background}
+
+% In-row decorations are the vertical borders between the cells
+% and also the background color of the cells.
+
+% \begin{macro}{\cals@cs@outOne}
+% Typesets the background and the left border of a cell.
+% Decorations have zero depth and undefined height.
+% Parameters:
+% \begin{enumerate}
+% \item Width of the cell. The use of |\relax| avoids typesetting
+% the cell itself, which is used when creating the right frame
+% of a table.
+% \item Width of the border. 0pt is no border.
+% \item Color of the background. Empty macro is no color.
+% \end{enumerate}
+% If some arguments are undefined (through |\relax|), global
+% variables are used: |\cals@bgcolor| and |\cals@cs@width|.
+%
+% Corrupts |dimen0|.
+% \begin{macrocode}
+\newcommand\cals@cs@outOne[3]{%
+% \end{macrocode}
+% Create the full-width background
+% \begin{macrocode}
+\ifx \relax#1%
+\else
+ \cals@withColorII\cals@bgcolor{#3}\iftrue
+ \textcolor{\cals@color}{\vrule depth0pt width#1 }%
+ \hskip -#1\relax
+ \fi
+\fi
+% \end{macrocode}
+% The border. I feel that overprinting the background is good,
+% but I don't know why I think so.
+% \begin{macrocode}
+\cals@withWidthII\cals@cs@width{#2}\iftrue
+ \cals@halfWidthToDimen0 \cals@width %
+ \hskip -\dimen0 %
+ \vrule depth0pt width\cals@width\relax
+ \hskip -\dimen0 %
+\fi
+% \end{macrocode}
+% We will need the actual width of the left border in
+% a grand-grand-...-caller, when constructing a rowsep specification.
+% \begin{macrocode}
+\let\cals@lastLeftWidth=\cals@width
+% \end{macrocode}
+% Add width to skip to the next cell.
+% \begin{macrocode}
+\ifx \relax#1\else \hskip#1 \fi
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\cals@current@cs}
+% The box to store column separation.
+% \begin{macrocode}
+\newbox\cals@current@cs
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\cals@csrow@begin}
+% \begin{macro}{\cals@csrow@nextcell}
+% \begin{macro}{\cals@csrow@end}
+% Constructs an hbox with colsep decorations. Call to the begin-macro
+% re-initializes |\cals@current@cs| and makes that the left table frame border
+% is of the correct width. The end-macro creates the right border for
+% the right table frame. The most work is performed in the nextcell-macro.
+% Arguments:
+% \begin{enumerate}
+% \item Width of the cell
+% \item Width of the left border
+% \item Width of the right border, \emph{must be a macro name}
+% \item Background color of the cell
+% \end{enumerate}
+% For the special conditions (|\relax|, 0pt, empty name) see
+% the description of |\cals@cs@outOne|.
+% The right border is not typeset immediately. Instead, it is saved
+% to |\cals@lastWidth| (as |\relax| if no overrides)
+% and is handled by the next call to |nextcell|.
+% \begin{macrocode}
+\newcommand\cals@csrow@begin{%
+\setbox\cals@current@cs=\box\voidb@x %
+\let\cals@lastWidth=\relax}
+
+\newcommand\cals@csrow@nextcell[4]{%
+% \end{macrocode}
+% For the first cell, temporarily re-define the default border width
+% to the frame border. Macro |\next| will restore it back.
+% \begin{macrocode}
+\ifvoid\cals@current@cs
+ \toks0=\expandafter{\cals@cs@width}%
+ \def\next{\edef\cals@cs@width{\the\toks0}}%
+ \edef\cals@cs@width{\cals@framecs@width}%
+\else \let\next=\relax \fi
+% \end{macrocode}
+% Create the decorations, remember the right border.
+% Restore the value |lastLeftWidth| after the end of the hbox-group.
+% \begin{macrocode}
+\cals@maxWidth\cals@lastWidth{#2}%
+\setbox\cals@current@cs=\hbox{\unhbox\cals@current@cs
+ \cals@cs@outOne{#1}\cals@width{#4}%
+ \global\let\cals@tmp=\cals@lastLeftWidth}%
+\let\cals@lastLeftWidth=\cals@tmp
+\let\cals@lastWidth=#3%
+% \end{macrocode}
+% Restore the old value of the default border width.
+% \begin{macrocode}
+\next}
+
+% \end{macrocode}
+% User-specified width (initially by |borderR|, now located in
+% |lastWidth|) must override the frame width.
+% \begin{macrocode}
+\newcommand\cals@csrow@end{%
+\ifx \relax\cals@lastWidth
+ \let\cals@width=\cals@framecs@width
+\else
+ \let\cals@width=\cals@lastWidth
+\fi
+\cals@csrow@nextcell\relax\cals@width\relax\relax}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
diff --git a/Master/texmf-dist/source/latex/cals/decor.dtx b/Master/texmf-dist/source/latex/cals/decor.dtx
new file mode 100644
index 00000000000..4a40097c13e
--- /dev/null
+++ b/Master/texmf-dist/source/latex/cals/decor.dtx
@@ -0,0 +1,227 @@
+% \section{Decorations}
+
+% How much decoration requires a table? Initially I thought to implement
+% a generic approach, so an user could extend the set of what is
+% possible---for example, a dashed border instead of a solid one.
+% But this is a hard task for me, therefore I switched back
+% to the fixed set of properties. Indeed, the use case for cals
+% tables is technical documentation, not a wanna-be designer showcases.
+%
+% The fixed set of decoration properties:
+% \begin{itemize}
+% \item padding
+% \item border thickness
+% \item cancelled after some thinking: border color
+% \item cell background
+% \end{itemize}
+%
+% In the first version of this package, decorations could be defined
+% for all cells in a row, for all cells in a column and finally
+% specially for a cell. Unfortunately, this approach does not work
+% for borders of multipage tables, when the decorations on a break are
+% different to the internal decorations. Trying different
+% workarounds, I finally found a descriptive and direct approach:
+% define default decorations for a cell plus define
+% decorations for the table frame.
+%
+% How to decorate the common border of two cells? The following
+% seems reasonable:
+% \begin{itemize}
+% \item The priority of settings: from the user, from the table
+% frame, default. If cells have different priorities, use the
+% highest one.
+% \item When priorities are the same, use the maximal thinkness.
+% \end{itemize}
+%
+% Imagine that the user uses only default decorations. Then all
+% the internal vertical borders are the same, and all internal
+% horizontal border are also the same. It took me time to
+% understand this obvious thing, that for the default setup
+% we need to define settings only for vertical and horizontal
+% borders, not for all four borders.
+%
+% Column separation and row separation are two very different
+% creatures. The former is fixed after a row is processed,
+% the latter could change somewhen later due to a table break.
+
+% \subsection{Setters and getters}
+
+% No more setter and getters provided to discourage cell formatting.
+% At the moment, if you really need it, use the knowledge of
+% the internal variables.
+
+% \begin{macro}{\cals@cs@width}
+% Width of column separators (vertical borders). For all the widths, |0pt| disables the rule.
+% \begin{macro}{\cals@framecs@width}
+% Width of the left and right table frame border.
+% \begin{macro}{\cals@rs@width}
+% Width of row separators (horizontal borders).
+% \begin{macro}{\cals@framers@width}
+% Width of the top and bottom table frame border.
+% \begin{macro}{\cals@bodyrs@width}
+% Width of row separators between the body and the header or the footer.
+% \begin{macro}{\cals@bgcolor}
+% Background color of the cells. If the macro is empty, it means no background.
+% \begin{macrocode}
+\newcommand\cals@cs@width{.4pt}
+\newcommand\cals@framecs@width{0pt}
+\newcommand\cals@rs@width{.4pt}
+\newcommand\cals@framers@width{0pt}
+\newcommand\cals@bodyrs@width{1.2pt}
+\newcommand\cals@bgcolor{}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+
+% \begin{macro}{\cals@borderL}
+% \begin{macro}{\cals@borderT}
+% \begin{macro}{\cals@borderR}
+% \begin{macro}{\cals@borderB}
+% Overrides for the widths of the cell borders (left, top, right or bottom).
+% Macros, set to |\relax| by the |calstable| environment.
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+
+% Padding parameters (|\cals@paddingL| etc) and related
+% macros (|\alignC| etc) are defined near the macro |\cell|.
+
+% \subsection{Decorations for a row}
+
+% The whole code in this section is devoted to provide functionality
+% for the functions |\cals@decor@begin|, |...@next|, |...@end|. After a row is ended,
+% we have the following decorations:
+% \begin{itemize}
+% \item column separation: box |\cals@current@cs|
+% \item rowsep specification for the top: macro |\cals@rs@above|
+% \item rowsep specification for the bottom: macro |\cals@rs@below|
+% \end{itemize}
+% The high-level approach is obvious: we construct the decorations
+% cell-by-cell. First, we calculate column separation, getting
+% the width of the left and the right border. Then we use these
+% values to update the border above and below. Unfortunately,
+% there is a lot of small details. For example, as explained later,
+% we construct the decorations with a delay, therefore the end-function
+% is just a special sort of the next-function.
+
+% \begin{macro}{\cals@decor@begin}
+% Initialization.
+% \begin{macrocode}
+\newcommand\cals@decor@begin{\cals@csrow@begin\cals@rs@spec@begin}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\cals@decor@next}
+% Updates the decorations. The argument is the width of the cell.
+% \begin{macrocode}
+\newcommand\cals@decor@next[1]{%
+\cals@csrow@nextcell{#1}\cals@borderL\cals@borderR\cals@bgcolor
+\cals@rs@spec@next{#1}\cals@lastLeftWidth\cals@borderT\cals@borderB}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\cals@decor@end}
+% Finishes the decorations. Uses |\cals@lastLeftWidth|,
+% which is the width of the last right border.
+% \begin{macrocode}
+\newcommand\cals@decor@end{%
+\cals@csrow@end
+\cals@rs@spec@end\cals@lastLeftWidth}
+% \end{macrocode}
+% \end{macro}
+
+% \subsection{Deciding on the width and color}
+
+% \begin{macro}{\cals@widthII}
+% \begin{macro}{\cals@withWidthII}
+% Calculate a final width from the default one (argument 1)
+% and user-specified (argument 2, |\relax| means use the default),
+% put it to the macro |\cals@width|. Also, the macro |withWidthII|
+% start a conditional construction,
+% true branch is executed when the width is not zero.
+% Unused \#3 is for if-fi balancing, see |\cals@iftrue|.
+% \begin{macrocode}
+\newcommand\cals@widthII[2]{%
+\ifx \relax#2\edef\cals@width{#1}%
+ \else \edef\cals@width{#2}\fi}
+
+\newcommand\cals@withWidthII[3]{%
+\cals@widthII{#1}{#2}%
+\ifdim \cals@width>0pt }
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+
+% \begin{macro}{\cals@withColorII}
+% Calculate a final color from the default one (argument 1)
+% and user-specified (argument 2, |\relax| means use the default),
+% set the macro |\cals@color| to it. The both arguments must
+% be macro names, not token lists. Start a conditional
+% construction, true branch is executed when the color name is
+% given (not empty).
+% Unused \#3 is for if-fi balancing, see |\cals@iftrue|.
+% \begin{macrocode}
+\newcommand\cals@withColorII[3]{%
+\ifx \relax#2\edef\cals@color{#1}%
+ \else \edef\cals@color{#2}\fi
+% \end{macrocode}
+% Reversing a condition. Based on |\ifnot| macro by David Kastrup
+% posted to comp.text.tex 2 March 1998, Message-ID:
+% |<m2en0lebuc.fsf@mailhost.neuroinformatik.ruhr-uni-bochum.de>#1/1|.
+% \begin{macrocode}
+\ifx \cals@color\empty \else\expandafter\expandafter\fi\iffalse\iftrue\fi}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\cals@halfWidthToDimen}
+% Puts the half of the width in |#2| to the dimension
+% register |#1|.
+% \begin{macrocode}
+\newcommand\cals@halfWidthToDimen[2]{%
+\dimen#1=#2\relax \divide\dimen#1 by 2 }
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\cals@maxWidth}
+% Of two widths, given as macros, selects the maximal and put
+% the result to |\cals@width|. Takes care for |\relax|.
+% \begin{macrocode}
+\newcommand\cals@maxWidth[2]{%
+\ifx \relax#1\relax
+ \ifx \relax#2\let\cals@width=\relax
+ \else \edef\cals@width{#2}\fi
+\else
+ \ifx \relax#2\relax
+ \edef\cals@width{#1}%
+ \else
+ \ifdim #1>#2 \edef\cals@width{#1}%
+ \else \edef\cals@width{#2}\fi\fi\fi}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\cals@iftrue}
+% \begin{macro}{\cals@iffalse}
+% Balancing if-fi. The following does not work:
+% \begin{verbatim}
+% \let\next=\iftrue ...
+% \if ... \next ... \fi ... \fi
+% \end{verbatim}
+% But this code does work:
+% \begin{verbatim}
+% \let\next=\cals@iftrue ...
+% \if ... \next\iftrue ... \fi ... \fi
+% \end{verbatim}
+% We use |\iftrue| (or any other if-start), which is taken into
+% account when scanning for the fi-else-if balance,
+% but ignored when executed.
+% \begin{macrocode}
+\def\cals@iftrue#1{\iftrue}
+\def\cals@iffalse#1{\iffalse}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
diff --git a/Master/texmf-dist/source/latex/cals/lltokens.dtx b/Master/texmf-dist/source/latex/cals/lltokens.dtx
new file mode 100644
index 00000000000..35a1a8e905e
--- /dev/null
+++ b/Master/texmf-dist/source/latex/cals/lltokens.dtx
@@ -0,0 +1,170 @@
+% \subsection{List list of tokens}
+%
+% Two-dimensional arrays of tokens, or lists of lists of tokens.
+%
+%
+% Format of the list:
+%
+% \begin{verbatim}
+% {...tokens1...}{...tokens2...}...{...tokensN...}
+% \end{verbatim}
+%
+% Token manipulation should not belong to the ``cals'' package,
+% and the macros from this section have the prefix |llt@|
+% instead of |cals@|. Probably it is better to use some CTAN
+% package, but initially the llt-code was small and simple, so
+% I did not want dependencies, and now I do not want to replace
+% working code with something new.
+%
+% In comments to these functions, a parameter of type \textit{token list}
+% is a macro which will be expanded once to get the tokens, and
+% \textit{list list} is a macro which stores the two-dimensional array.
+%
+% An example of use:
+% \begin{verbatim}
+% \def\aaa{aaa}
+% \def\bbb{bbb}
+% \def\ccc{ccc}
+% \def\lst{} % empty list
+% \llt@cons\bbb\lst % \lst -> "{bbb}"
+% \llt@snoc\lst\ccc % \lst -> "{bbb}{ccc}"
+% \llt@cons\aaa\lst % \lst -> "{aaa}{bbb}{ccc}"
+% \llt@decons\lst % \llt@car -> "aaa", \lst -> "{bbb}{ccc}"
+% \llt@rot\lst % \llt@car -> "bbb", \lst -> "{ccc}{bbb}"
+% \end{verbatim}
+%
+%
+
+%
+% \begin{macro}{\llt@cons}
+% Prepends the token list \#1 to the list list \#2.
+% Corrupts the token registers 0 and~2.
+% \begin{macrocode}
+\def\llt@cons#1#2{%
+\toks0=\expandafter{#1}%
+\toks2=\expandafter{#2}%
+\edef#2{\noexpand{\the\toks0}\the\toks2 }%
+}
+% \end{macrocode}
+% \end{macro}
+
+%
+% \begin{macro}{\llt@snoc}
+% Appends the token list \#2 to the list list \#1 (note the order
+% of parameters).
+% Macro corrupts the token registers 0 and 2.
+%
+% \begin{macrocode}
+\def\llt@snoc#1#2{%
+\toks0=\expandafter{#1}%
+\toks2=\expandafter{#2}%
+\edef#1{\the\toks0 \noexpand{\the\toks2}}%
+}
+% \end{macrocode}
+% \end{macro}
+
+%
+% \begin{macro}{\llt@car}
+% A token list, set as a side-effect of the list deconstruction
+% and rotation functions.
+% \end{macro}
+
+%
+% \begin{macro}{\llt@decons}
+% List deconstruction. The first item is removed from the list list \#1
+% and its tokens are put to the token list |\llt@car|.
+% Corrupts the token register 0.
+% Undefined behaviour if the list list has no items.
+%
+% The actual work happens on the |\expandafter| line.
+% It's hard to explain, let me show the macro expansion,
+% I hope it's self-explaining.
+%
+% \begin{verbatim}
+% \expandafter\llt@decons@open\lst} -->
+% \llt@decons@open{aaa}{bbb}{ccc}{ddd}} -->
+% \def\llt@car{aaa} \toks0=\llt@opengroup {bbb}{ccc}{ddd}} -->
+% \def\llt@car{aaa} \toks0={{bbb}{ccc}{ddd}}
+% \end{verbatim}
+%
+% Why I use |\let\llt@opengroup={| inside the definition?
+% Only to balance the number of opening and closing brackets.
+% Otherwise TeX will not compile the definition.
+%
+% Initially I tried to use the following helper:
+%
+% \begin{verbatim}
+% \def\decons@helper#1#2\relax{%
+% \def\llt@car{#1}%
+% \def\list{#2}}
+% \end{verbatim}
+%
+% If a call is |\decons@helper{aaa}{bbb}{ccc}\relax| then
+% all is ok, the helper gets: \#1 is |aaa| and \#2 is
+% |{bbb}{ccc}|.
+%
+% Unfortunately, if the list has two items and the call is
+% |\decons@helper{aaa}{bbb}}\relax|, then the helper gets:
+% \#1 is |aaa| and \#2 is |bbb| instead of |{bbb}|.
+% The grouping tokens are lost, and we can't detect it.
+%
+% \begin{macrocode}
+\def\llt@decons@open#1{%
+\def\llt@car{#1}%
+\toks0=\llt@opengroup
+}
+
+\def\llt@decons#1{%
+\let\llt@opengroup={%
+\expandafter\llt@decons@open#1}%
+\edef#1{\the\toks0}%
+}
+% \end{macrocode}
+% \end{macro}
+
+%
+% \begin{macro}{\llt@rot}
+% Rotates the list list \#1. The first item becomes the last. Also,
+% its tokens are saved to token list |\llt@car|.
+% The second item becomes the first item, the third the second etc.
+% Corrupts the token registers 0 and 2.
+%
+% \begin{macrocode}
+\def\llt@rot#1{%
+\ifx#1\empty
+\let\llt@car=\relax
+\else
+\llt@decons#1%
+\llt@snoc#1\llt@car%
+\fi
+}
+% \end{macrocode}
+% \end{macro}
+
+%
+% \begin{macro}{\llt@desnoc}
+% Very unefficient list deconstruction. The last item is removed
+% from the list list \#1 % and its tokens are put to the token
+% list |\llt@car|. Corrupts the token registers 0 and 2.
+% Undefined behaviour if the list list has no items.
+%
+% |\llt@desnocII| is used to hide |\if| from the loop.
+% \begin{macrocode}
+\def\llt@desnocII#1{
+\ifx\empty#1%
+\let\llt@tmp=n%
+\else
+\llt@snoc{\llt@newlist}{\llt@car}%
+\let\llt@tmp=y%
+\fi
+}
+
+\def\llt@desnoc#1{%
+\def\llt@newlist{}%
+\loop
+\llt@decons{#1}%
+\llt@desnocII{#1}%
+\if y\llt@tmp \repeat
+\let#1=\llt@newlist}
+% \end{macrocode}
+% \end{macro}
diff --git a/Master/texmf-dist/source/latex/cals/rowsep.dtx b/Master/texmf-dist/source/latex/cals/rowsep.dtx
new file mode 100644
index 00000000000..c3c0174c2d2
--- /dev/null
+++ b/Master/texmf-dist/source/latex/cals/rowsep.dtx
@@ -0,0 +1,360 @@
+% \subsection{Row separation (rowsep)}
+
+% \subsubsection{Data presentation}
+
+% A horizontal line between table rows can't appear in the output
+% immediately. Its formatting should be postponed until the next
+% row and its context are known. Two basic cases:
+% \begin{itemize}
+% \item The default cell formatting is to have a border around cells.
+% For some cell \textit{A} in the middle of a table, the user has
+% overridden formatting to no borders. To imlement the user's wish,
+% we should not create the bottom border for the cell \textit{B}
+% which is above the \textit{A}. But we don't know about the wish
+% for \textit{A} while processing \textit{B}. Therefore, the border
+% between two rows can be established only after processing the
+% both rows.
+% \item The default cell border is 1pt, but a border between
+% a body and a header or a footer row is 2pt. It means that the
+% border between two rows should be created only after we sure
+% that there is no table break.
+% \end{itemize}
+% Our approach is to define the desired formatting of a rowsep
+% as a set of parameters in a token list. Later we can join two
+% rowseps or a rowsep and context to a final rowsep.
+%
+% A rowsep token list consist of several items, each
+% item is a list of tokens or token groups:
+% \begin{enumerate}
+% \item length
+% \item left-border
+% \item right-border
+% \item user-specified thickness
+% \end{enumerate}
+% Values \textit{left-border} and \textit{right-border} are
+% required to get a nice rectangle border around a cell. Without length
+% correction, using the cell dimension, the border could look like:
+% \begin{verbatim}
+% xxxxxxxx
+% xxx cell xxx
+% xxxxxxxx
+% \end{verbatim}
+% With length correction, we get the correct result:
+% \begin{verbatim}
+% xxxxxxxxxxxx
+% xxx cell xxx
+% xxxxxxxxxxxx
+% \end{verbatim}
+%
+% Here is an example of a rowsep specification. It consist of three items.
+% The first item: length is 5cm, width 2pt, borders are 2mm.
+% The second item: length is 9cm, borders are 2mm, no rule at all.
+% The third item: length 2cm, default width, borders are 2pt.
+% The token list for this specification:
+% \begin{verbatim}
+% { {5cm} {2mm} {2mm} {2pt} }
+% { {9cm} {2mm} {2mm} {0pt} }
+% { {2cm} {2pt} {2pt} \relax }
+% \end{verbatim}
+%
+% Cell length and the left and right borders should be the correct lengths,
+% the rule thickness can be |\relax|, in this case the actual thickness
+% will be calculated during output.
+%
+% \begin{macro}{\cals@rs@pack}
+% Construct a rowsep fragment from the arguments 2-5 and
+% put it to the macro 1.
+% \begin{macrocode}
+\newcommand\cals@rs@pack[5]{%
+\edef#1{\noexpand{#2\noexpand}\noexpand{#3\noexpand}\noexpand{#4\noexpand}%
+ \ifx \relax#5\relax \else \noexpand{#5\noexpand}\fi }}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\cals@rs@unpack}
+% The reverse for |\cals@rs@pack|. The first argument is a rowsep
+% fragment (without enclosing curly braces), arguments 2-5 is macro
+% names where to put the results.
+% \begin{macrocode}
+\newcommand\cals@rs@unpack[5]{%
+\def\cals@tmp##1##2##3##4{\edef#2{##1}\edef#3{##2}\edef#4{##3}%
+ \ifx\relax##4\let#5=\relax \else \edef#5{##4}\fi}%
+\expandafter\cals@tmp#1}
+% \end{macrocode}
+% \end{macro}
+
+%
+% ^^A -----------------------------------------------------
+%
+% \subsubsection{From individual decorations to rowsep specification}
+
+% The rowsep specifications are created cell-by-cell and stored
+% in the macros |\cals@current@rs@above| and |\cals@current@rs@below|.
+% The construction happens with delay because we don't know
+% the exact value of the right border until the next cell is processed.
+
+% \begin{macro}{\cals@rs@spec@begin}
+% Initializes |\cals@current@rs@above|, |\cals@current@rs@below|
+% and set the flag of a new row.
+% \begin{macrocode}
+\newcommand\cals@rs@spec@begin{%
+\def\cals@current@rs@above{}%
+\def\cals@current@rs@below{}%
+\let\cals@rs@spec@ll=\relax}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\cals@rs@spec@next}
+% \begin{macro}{\cals@rs@spec@nextII}
+% Finalizes the decorations for the previous cell by using the left border
+% of the current as the right border for the previous. Then
+% remembers the decorations of the current cell ---
+% the left border width,
+% the widths of the top and bottom borders (|\relax| is ok) ---
+% in the macros |\cals@rs@spec@ll|, |...@bl|, |...@bt|, |...@bb|.
+% All the arguments much be macros.
+% \begin{macrocode}
+\newcommand\cals@rs@spec@next[4]{
+\cals@rs@spec@nextII#2
+\let\cals@rs@spec@ll=#1%
+\let\cals@rs@spec@bl=#2%
+\let\cals@rs@spec@bt=#3%
+\let\cals@rs@spec@bb=#4%
+}
+
+\newcommand\cals@rs@spec@nextII[1]{%
+\ifx \relax\cals@rs@spec@ll \else
+ \cals@rs@pack\cals@tmp\cals@rs@spec@ll\cals@rs@spec@bl#1\cals@rs@spec@bt
+ \llt@snoc\cals@current@rs@above\cals@tmp
+ \cals@rs@pack\cals@tmp\cals@rs@spec@ll\cals@rs@spec@bl#1\cals@rs@spec@bb
+ \llt@snoc\cals@current@rs@below\cals@tmp
+\fi
+}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+
+% \begin{macro}{\cals@rs@spec@end}
+% Finishes the rowsep specification by putting the last cell to it.
+% The only implicit argument (|\cals@lastLeftWidth|) is the width
+% of the right border of the last cell.
+% \begin{macrocode}
+\newcommand\cals@rs@spec@end[1]{}
+\let\cals@rs@spec@end=\cals@rs@spec@nextII
+% \end{macrocode}
+% \end{macro}
+
+%
+% ^^A -----------------------------------------------------
+%
+% \subsubsection{``Waiting'' rowsep}
+%
+% \begin{macro}{\cals@rs@sofar@length}
+% \begin{macro}{\cals@rs@sofar@borderl}
+% \begin{macro}{\cals@rs@sofar@borderr}
+% \begin{macro}{\cals@rs@sofar@width}
+% Typesetting a row separator is not an easy task, especially
+% because we support border-widths. Indeed, consider the worst
+% case: four cells and all the borders are different.
+% Our solution is an optimizer for a good case. We do not typeset
+% a fragment of the rule immediately. Instead, we remember the
+% parameters. If the next fragment is of the same width,
+% we increase the length of the ``waiting'' fragment.
+% Otherwise, we output the waiting fragment and the new fragment
+% becomes the new waiting fragment.
+% \begin{macrocode}
+\newcommand\cals@rs@sofar@length{}
+\newcommand\cals@rs@sofar@borderl{}
+\newcommand\cals@rs@sofar@borderr{}
+\newcommand\cals@rs@sofar@width{}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+
+% \begin{macro}{\cals@rs@sofar@reset}
+% Sets a flag that a new waiting rule should be started.
+% \begin{macrocode}
+\newcommand\cals@rs@sofar@reset{\let\cals@rs@sofar@width=\relax}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\cals@rs@sofar@end}
+% Prints the waiting rule, if exists.
+% \begin{macrocode}
+\newcommand\cals@rs@sofar@end{\ifx\relax\cals@rs@sofar@width
+ \else\cals@rs@sofar@out\fi}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\cals@rs@sofar@next}
+% Enlarges the current waiting rule, or typesets it and
+% starts new if the widths do not match. All the parameters
+% must be macro names. In order: length, left border, right
+% border, width.
+% \begin{macrocode}
+\newcommand\cals@rs@sofar@next[4]{%
+\ifx\relax\cals@rs@sofar@width
+% \end{macrocode}
+% Starts a new waiting rule.
+% \begin{macrocode}
+ \let\cals@rs@sofar@length=#1%
+ \let\cals@rs@sofar@borderl=#2%
+ \let\cals@rs@sofar@borderr=#3%
+ \let\cals@rs@sofar@width=#4%
+\else
+ \ifdim \cals@rs@sofar@width=#4\relax
+% \end{macrocode}
+% Enlarges the waiting rule.
+% \begin{macrocode}
+ \dimen0=\cals@rs@sofar@length\relax
+ \advance\dimen0 by #1\relax
+ \edef\cals@rs@sofar@length{\the\dimen0}%
+ \let\cals@rs@sofar@borderr=#3%
+ \else
+% \end{macrocode}
+% Typesets the current and start a new waiting rule.
+% \begin{macrocode}
+ \cals@rs@sofar@out
+ \let\cals@rs@sofar@length=#1%
+ \let\cals@rs@sofar@borderl=#2%
+ \let\cals@rs@sofar@borderr=#3%
+ \let\cals@rs@sofar@width=#4%
+ \fi
+\fi}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\cals@rs@sofar@over}
+% Repeats the last rowsep fragment, probably with another settings.
+% Arguments are like in |\cals@rs@sofar@next|.
+% \begin{macrocode}
+\newcommand\cals@rs@sofar@over[4]{%
+\ifdim 0pt=#4
+ \relax
+\else
+ \ifdim \cals@rs@sofar@width=#4\relax
+% \end{macrocode}
+% The width is not changed. We probably need to enlarge the right border
+% and probably the left border too. The latter is a bit harder because
+% we don't want to change it if the line continues from another cell
+% (so, change only if |length|+|borderl|\textgreater |sofar@length|+|sofar@borderl|).
+% \begin{macrocode}
+ \ifdim #3>\cals@rs@sofar@borderr\relax
+ \edef\cals@rs@sofar@borderr{#3}%
+ \fi
+ \dimen0=\cals@rs@sofar@length
+ \advance\dimen0 by \cals@rs@sofar@borderl\relax
+ \advance\dimen0 by -#2\relax
+ \ifdim #1>\dimen0 \relax
+ \edef\cals@rs@sofar@borderl{#2}%
+ \fi
+ \else
+% \end{macrocode}
+% Typesets the current and start a new waiting rule.
+% \begin{macrocode}
+ \cals@rs@sofar@out
+ \hskip-#1\relax
+ \let\cals@rs@sofar@length=#1%
+ \let\cals@rs@sofar@borderl=#2%
+ \let\cals@rs@sofar@borderr=#3%
+ \let\cals@rs@sofar@width=#4%
+ \fi
+\fi}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\cals@rs@sofar@out}
+% Typesets the waiting rule
+% \begin{macrocode}
+\newcommand\cals@rs@sofar@out{%
+\ifdim 0pt=\cals@rs@sofar@width\relax
+ \hskip\cals@rs@sofar@length\relax
+\else
+ \cals@halfWidthToDimen0\cals@rs@sofar@borderl
+ \hskip-\dimen0\relax
+ \cals@halfWidthToDimen2\cals@rs@sofar@borderr
+ \dimen4=\cals@rs@sofar@length\relax
+ \advance\dimen4 by \dimen0\relax \advance\dimen4 by \dimen2\relax
+ \cals@halfWidthToDimen6\cals@rs@sofar@width
+ \vrule height\dimen6 depth\dimen6 width\dimen4\relax
+ \hskip-\dimen2\relax
+\fi}
+% \end{macrocode}
+% \end{macro}
+
+% ^^A -----------------------------------------------------
+%
+% \subsubsection{From rowsep specification to typesetting}
+
+% \begin{macro}{\cals@rs@joinTwo}
+% Join and typeset two rowseps (arguments 2 and 3, must be macro names).
+% The number and the lengths of the fragments in the rowseps
+% should match.
+% The argument 1 (also a macro name) is the default width.
+% Corrupts the macros 2 and 3.
+% Call this macro inside |sofar@reset|...|@end| group.
+% \begin{macrocode}
+\newcommand\cals@rs@joinTwo[3]{%
+% \end{macrocode}
+% The loop function.
+% \begin{macrocode}
+\def\next##1{%
+\ifx \eol##1\let\next=\relax
+\else
+ \toks0=\expandafter{##1}%
+ \edef\cals@tmpII{\the\toks0}%
+ \llt@decons#3%
+% \end{macrocode}
+% Now |\cals@tmpII| contains a current fragment of the first rowsep,
+% and |\llt@car| of the second. Unpack the individual parameters.
+% \begin{macrocode}
+ \cals@rs@unpack\cals@tmpII\cals@tmpLI \cals@tmpBlI \cals@tmpBrI \cals@tmpWI
+ \cals@rs@unpack\llt@car \cals@tmpLII\cals@tmpBlII\cals@tmpBrII\cals@tmpWII
+% \end{macrocode}
+% The special case is when we should not typeset a rowsep fragment.
+% \begin{macrocode}
+ \let\cals@tmp=\cals@iftrue
+ \cals@maxWidth\cals@tmpWI\cals@tmpWII
+ \ifx \relax\cals@width\else \ifdim \cals@width=0pt %
+ \cals@rs@sofar@next\cals@tmpLI\cals@tmpBlI\cals@tmpBrI\cals@width
+ \let\cals@tmp=\cals@iffalse
+ \fi\fi
+% \end{macrocode}
+% Not the special case. Put the both definitions, and let the
+% underlying functions take care of calculations.
+% \begin{macrocode}
+ \cals@tmp\ifvoid
+ \cals@widthII#1\cals@tmpWI
+ \cals@rs@sofar@next\cals@tmpLI\cals@tmpBlI\cals@tmpBrI\cals@width
+ \cals@widthII#1\cals@tmpWII
+ \cals@rs@sofar@over\cals@tmpLII\cals@tmpBlII\cals@tmpBrII\cals@width
+ \fi
+\fi
+% \end{macrocode}
+% End of |\next| definition: continue the loop.
+% End of |\cals@rs@joinTwo| definition: start the loop.
+% \begin{macrocode}
+\next}%
+\expandafter\next#2\eol}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\cals@rs@joinOne}
+% A simplified version of the previous macro. We have only one rowsep,
+% and want to join and typeset it with regard to some width,
+% given as the first macro parameter. Call this macro inside
+% |sofar@reset|...|@end| group.
+% \begin{macrocode}
+\newcommand\cals@rs@joinOne[2]{%
+\def\next##1{\ifx\eol##1\let\next=\relax\else
+ \toks0=\expandafter{##1}%
+ \edef\cals@tmpII{\the\toks0}%
+ \cals@rs@unpack\cals@tmpII\cals@tmpL\cals@tmpBl\cals@tmpBr\cals@tmpW
+ \cals@widthII#1\cals@tmpW
+ \cals@rs@sofar@next\cals@tmpL\cals@tmpBl\cals@tmpBr\cals@width
+\fi\next}%
+\expandafter\next#2\eol}
+% \end{macrocode}
+% \end{macro}
diff --git a/Master/texmf-dist/source/latex/cals/span.dtx b/Master/texmf-dist/source/latex/cals/span.dtx
new file mode 100644
index 00000000000..c84a7bfa1ba
--- /dev/null
+++ b/Master/texmf-dist/source/latex/cals/span.dtx
@@ -0,0 +1,176 @@
+% \subsection{Spanned cells}
+
+% The technical approach:
+% \begin{itemize}
+% \item Spanning is started in the left top corner using the
+% command |\nullcell{lt...}|
+% \item The spanned cell is split on the table cells using the
+% command |\nullcell|. These nullcells are responsible for
+% correct decorations and for calculating the big cell dimensions.
+% \item The content of the spanned cells comes in the end,
+% in the right bottom corner.
+% \end{itemize}
+
+% It is possible to have several active spans at once, therefore we
+% have to remember them. I use a queue. Each time a left column
+% of a span is started, we take span data from the queue. After the
+% right column of the span, we put the data back to the queue,
+% to the end. Probably it is not obvious at the first look (at least,
+% I needed time to find this simple idea) that this rotating queue
+% is always right: when spanning (its left column) starts again,
+% the beginning of the queue always contains data for exactly this spanning.
+
+% \begin{macro}{\cals@spanq@heights}
+% The queue for height tracking. In the first version I also had
+% a queue for decorations, but later cancelled it.
+% I use |\def| instead of |\newcommand| in order that |\show|
+% prints "|macro|" instead of "|\long macro|". The latter breaks
+% unit tests.
+% \begin{macrocode}
+\def\cals@spanq@heights{}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\cals@span@get}
+% Gets |\cals@span@height| from the queue.
+% \begin{macrocode}
+\newcommand\cals@span@get{%
+\llt@decons\cals@spanq@heights \cals@span@height=\llt@car\relax}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\cals@span@put}
+% Puts |\cals@span@height| to the queue.
+% \begin{macrocode}
+\newcommand\cals@span@put{%
+\edef\cals@tmp{\the\cals@span@height}\llt@snoc\cals@spanq@heights\cals@tmp}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\nullcell}
+% The big spanned cell is split on the table cells, which are
+% identified by |\nullcell|s. The task is to produce correct
+% decorations and to track the parameters of the spanned cell.
+% \begin{itemize}
+% \item Decorations: if defined, the background color is always
+% added to the column separation row.
+% \item Decorations: the borders are set to 0pt (disabled),
+% except for the borders which are requested by
+% the parameter of |\nullcell|: |l| for the left border,
+% |t| for the top, |r| for the right, |b| for the bottom.
+% \item More precisely, the letters in the argument are not to
+% specify which decorations to use, but to specify the location
+% of the small cell in the big cell. The use for decorations
+% is just an useful side-effect.
+% \item Action |l|: take the span data from the queue.
+% \item Action |r|: update the height of the current span,
+% put the data to the queue.
+% \item Action |b|: do not put an empty box to the current row.
+% Instead, accumulate the width of the current span.
+% (Preparation for |\spancontent|.)
+% \end{itemize}
+% \begin{macrocode}
+\newcommand\nullcell[1]{%
+% \end{macrocode}
+% First of all, parse the argument and set the if-commands |\cals@span@ifX|.
+% Then get the width of the cell.
+% \begin{macrocode}
+\let\cals@span@ifL=\cals@iffalse
+\let\cals@span@ifT=\cals@iffalse
+\let\cals@span@ifR=\cals@iffalse
+\let\cals@span@ifB=\cals@iffalse
+\def\next##1{\ifx\relax##1\let\next=\relax \else
+ \expandafter\let\csname cals@span@if##1\endcsname=\cals@iftrue \fi
+ \next}%
+\uppercase{\next #1}\relax
+\llt@rot\cals@colwidths \let\cals@nullcell@width=\llt@car
+% \end{macrocode}
+% Action "l": update the height, supress the borders, set the rowspan markers.
+% \begin{macrocode}
+\cals@span@ifL\iftrue
+ \cals@span@ifT\iftrue
+ \cals@span@height=0pt %
+ \else
+ \cals@span@get
+ \advance\cals@span@height by \cals@last@row@height\relax
+ \fi
+ \cals@span@ifB\iftrue \else
+ \let\cals@ifInRspan=\cals@iftrue
+ \let\cals@ifLastRspanRow=\cals@iffalse
+ \fi
+ \let\cals@span@borderL=\cals@borderL \let\cals@span@borderT=\cals@borderT
+ \let\cals@span@borderR=\cals@borderR \let\cals@span@borderB=\cals@borderB
+\fi
+% \end{macrocode}
+% Action "r": put the data to the queue, unless in the end of the spanning.
+% \begin{macrocode}
+\cals@span@ifR\iftrue
+ \cals@span@ifB\iftrue \relax \else \cals@span@put \fi
+\fi
+% \end{macrocode}
+% Update the current row or calculate the span width
+% (in the case of the bottom row).
+% \begin{macrocode}
+\cals@span@ifB\iftrue
+ \cals@span@ifL\iftrue
+ \cals@span@width=\cals@nullcell@width\relax
+ \else
+ \advance\cals@span@width by \cals@nullcell@width\relax
+ \fi
+\else
+ \setbox\cals@current@row=\hbox{%
+ \unhbox\cals@current@row
+ \vbox{\hbox to\cals@nullcell@width{}\vfil}}%
+\fi
+% \end{macrocode}
+% Update decorations
+% \begin{macrocode}
+\cals@span@ifL\iftrue \let\cals@borderL=\cals@span@borderL
+ \else \def\cals@borderL{0pt}\fi
+\cals@span@ifT\iftrue \let\cals@borderT=\cals@span@borderT
+ \else \def\cals@borderT{0pt}\fi
+\cals@span@ifR\iftrue \let\cals@borderR=\cals@span@borderR
+ \else \def\cals@borderR{0pt}\fi
+\cals@span@ifB\iftrue \let\cals@borderB=\cals@span@borderB
+ \else \def\cals@borderB{0pt}\fi
+\cals@decor@next\cals@nullcell@width
+\let\cals@borderL=\cals@span@borderL \let\cals@borderR=\cals@span@borderR
+\let\cals@borderT=\cals@span@borderT \let\cals@borderB=\cals@span@borderB
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\cals@span@width}
+% \begin{macro}{\cals@span@height}
+% The width of the span cell. The height of the spanned cell (without
+% the last row).
+% \begin{macrocode}
+\newdimen\cals@span@width
+\newdimen\cals@span@height
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+
+% \begin{macro}{\cals@ifInRspan}
+% Set to |\cals@iftrue| if the current row is a part of a row span.
+% Otherwise |\cals@iffalse|.
+% \end{macro}
+
+% \begin{macro}{\cals@ifLastRspanRow}
+% Set to |\cals@iftrue| if the current row is the last row of
+% of a row span. Otherwise |\cals@iffalse|.
+% \end{macro}
+
+% \begin{macro}{\cals@updateRspanMarkers}
+% Resets the span markers, which are later updated by |\nullcell|
+% to the correct state for the current row.
+% \begin{macrocode}
+\newcommand\cals@updateRspanMarkers{%
+\ifx \empty\cals@spanq@heights
+ \let\cals@ifInRspan=\cals@iffalse
+\else
+ \let\cals@ifInRspan=\cals@iftrue
+\fi
+\let\cals@ifLastRspanRow=\cals@iftrue}
+% \end{macrocode}
+% \end{macro}
diff --git a/Master/texmf-dist/source/latex/cals/table.dtx b/Master/texmf-dist/source/latex/cals/table.dtx
new file mode 100644
index 00000000000..0e55a9378f1
--- /dev/null
+++ b/Master/texmf-dist/source/latex/cals/table.dtx
@@ -0,0 +1,387 @@
+% \subsection{Row dispatcher}
+
+% \begin{macro}{\cals@row@dispatch}
+% Depending if the current row has a rowspan cell or not,
+% the execution is different.
+% \begin{macrocode}
+\newcommand\cals@row@dispatch{%
+\ifx b\cals@current@context
+ \cals@ifInRspan\iftrue
+ \cals@row@dispatch@span
+ \else
+ \cals@row@dispatch@nospan
+ \fi
+\else
+ \cals@row@dispatch@nospan
+\fi}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\cals@row@dispatch@nospan}
+% After a row is typeset in a box, this macro decides what to do next.
+% Usually, it should just add decorations and output the row.
+% But if a table break is required, it should put the current row
+% to backup, typeset the footer, the break, the header and only then
+% the row from the backup. Summary of main parameters:
+% \begin{itemize}
+% \item rowsep from the last row (|\cals@last@rs|) and the
+% last context (|\cals@last@context|)
+% \item current row (|\cals@current@row|), its decorations
+% (|\cals@current@cs|, |\cals@current@rs@above|,
+% |\cals@current@rs@below|) and context (|\cals@current@context|)
+% \end{itemize}
+% \begin{macrocode}
+\newcommand\cals@row@dispatch@nospan{%
+% \end{macrocode}
+% The header and footer rows are always typeset without further
+% considerations.
+% \begin{macrocode}
+\let\cals@last@context@bak=\cals@last@context
+\ifx h\cals@current@context \else
+\ifx f\cals@current@context \else
+% \end{macrocode}
+% In the body, if a break is required: do it.
+% \begin{macrocode}
+\cals@ifbreak\iftrue
+ \setbox\cals@backup@row=\box\cals@current@row
+ \setbox\cals@backup@cs=\box\cals@current@cs
+ \let\cals@backup@rs@above=\cals@current@rs@above
+ \let\cals@backup@rs@below=\cals@current@rs@below
+ \let\cals@backup@context=\cals@current@context
+ \cals@tfoot@tokens
+ \lastrule
+ \cals@issue@break
+ \cals@thead@tokens
+ \setbox\cals@current@row=\box\cals@backup@row
+ \setbox\cals@current@cs=\box\cals@backup@cs
+ \let\cals@current@rs@above=\cals@backup@rs@above
+ \let\cals@current@rs@below=\cals@backup@rs@below
+ \let\cals@current@context=\cals@backup@context
+\fi\fi\fi
+% \end{macrocode}
+% Typeset the row.
+% \begin{macrocode}
+\cals@issue@row
+% \end{macrocode}
+% Consider a table such that thead+row1 do not fit to a page
+% (see the unit test |regression/test_010_wrongbreak|).
+% Without the next code, the following happens:
+% thead and row1 are typeset, but the output procedure is not
+% executed yet. Therefore, when row2 is ready, we detect that
+% a table break is required and create it. Then the output procedure
+% moves thead+row1 on the next page. The result:
+% thead and row1 on one page, row2 and the rest on the next page
+% instead of the whole table on one page.
+% Solution: force a run of the output procedure after
+% the first row of a table chunk.
+% \begin{macrocode}
+\ifx b\cals@last@context
+ \ifx h\cals@last@context@bak \vskip0pt \penalty10000 \fi
+ \ifx n\cals@last@context@bak \vskip0pt \penalty10000 \fi
+\fi
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\cals@row@dispatch@span}
+% The only specific thing to rowspanned rows is that we should not
+% allow breaks between the rows in one group. We put these rows
+% to one box, and process this big box as a big row.
+% \begin{macrocode}
+\newcommand\cals@row@dispatch@span{%
+% \end{macrocode}
+% Output the row to the backup box. If the row is the first
+% row in the span, let its decorations will be the decorations
+% for the future big row. Also, reset the values of leftskip
+% and rightskip to avoid adding them twice, once in a individual
+% row, and once to the common span box.
+% \begin{macrocode}
+\ifvoid\cals@backup@row
+ \setbox\cals@backup@row=\vbox{\box\cals@current@row}%
+ \setbox\cals@backup@cs=\box\cals@current@cs
+ \let\cals@backup@rs@above=\cals@current@rs@above
+ \let\cals@backup@context=\cals@last@context
+ \cals@backup@leftskip=\leftskip
+ \cals@backup@rightskip=\rightskip
+ \leftskip=0pt \rightskip=0pt \relax
+\else
+ \setbox\cals@backup@row=\vbox{\unvbox\cals@backup@row
+ \cals@issue@row}%
+\fi
+\let\cals@last@rs@below=\cals@current@rs@below
+\let\cals@last@context=\cals@current@context
+% \end{macrocode}
+% If this is the last row of the span, create the fake big row
+% and use the normal dispatcher.
+%
+% \begin{macrocode}
+\cals@ifLastRspanRow\iftrue
+ \setbox\cals@current@row=\box\cals@backup@row
+ \setbox\cals@current@cs=\box\cals@backup@cs
+ \let\cals@current@rs@above=\cals@backup@rs@above
+ \let\cals@last@context=\cals@backup@context
+ \leftskip=\cals@backup@leftskip
+ \rightskip=\cals@backup@rightskip
+ \cals@row@dispatch@nospan
+\fi
+}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\cals@backup@row}
+% \begin{macro}{\cals@backup@cs}
+% Boxes and skips for backup.
+% \begin{macrocode}
+\newbox\cals@backup@row
+\newbox\cals@backup@cs
+\newskip\cals@backup@leftskip
+\newskip\cals@backup@rightskip
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+
+% To decide on table breaks and row separation decorations,
+% we need to trace context.
+
+% \begin{macro}{\cals@current@context}
+% The context of the current row. Possible values,
+% set as a "|\let|" to a character:
+% \begin{itemize}
+% \item n: no context, should not happen when the value is required
+% \item h: table header
+% \item f: table footer
+% \item b: table body
+% \end{itemize}
+% \end{macro}
+
+% \begin{macro}{\cals@last@context}
+% The context of the previous row. Possible values, set as a
+% "|\let|" to a character:
+% \begin{itemize}
+% \item n: there is no previous row (not only the start of a table,
+% but also the start of a table chunk)
+% \item h, f, b: table header, footer, body
+% \item r: a last rule of the table (or its chunk) is just output.
+% This status is used to allow multiple calls to |\lastrule|.
+% Probably the use of |current| instead of |last| is more logical,
+% but using |last| is more safe. Who knows if an user decides to use
+% |\lastrule| somewhere in a middle of a table.
+% \end{itemize}
+% \end{macro}
+
+% \begin{macro}{\cals@ifbreak}
+% Table breaks can be manual or automatic. The first is easy,
+% the second is near to impossible if we take into account
+% table headers and footer. The following heuristic seems good.
+%
+% Check if the current row plus the footer fits to the
+% rest of the page. If not, a break is required. This approach
+% is based on two assumptions:
+% \begin{itemize}
+% \item the height of the footer is always the same, and
+% \item any body row is larger than the footer.
+% \end{itemize}
+%
+% More precise and technical description: |\cals@ifbreak| decides
+% if an automatic table break is required and leaves the
+% macro |\cals@iftrue| (yes) or |\cals@iffalse| (no) in the input stream.
+% If the user sets |\cals@tbreak@tokens| (using |\tbreak|),
+% break is forced. Otherwise, no break is allowed:
+% \begin{itemize}
+% \item In the header
+% \item In the footer
+% \item Immediately after the header
+% \item At the beginning of a chunk of a table.
+% \end{itemize}
+% Otherwise break is recommended when
+% the sum of the height of the current row and of the footer part
+% is greater as the rest height of the page.
+% The implicit first parameter is used for if-fi balancing,
+% see |\cals@iftrue|.
+% \begin{macrocode}
+\newcommand\cals@ifbreak[1]{}
+\def\cals@ifbreak{%
+\let\cals@tmp=\cals@iffalse
+\let\cals@tmpII=\cals@iftrue
+\ifx\relax\cals@tbreak@tokens
+ \ifx h\cals@current@context \else
+ \ifx f\cals@current@context \else
+ \ifx h\cals@last@context \else
+ \ifx n\cals@last@context \else
+ \dimen0=\pagetotal\relax
+ \advance\dimen0 by \ht\cals@current@row\relax
+ %\showthe\ht\cals@current@row\relax
+ \ifx \cals@tfoot@tokens\relax \else
+ %\show\cals@tfoot@height\relax
+ \advance\dimen0 by \cals@tfoot@height\relax
+ \fi
+ %\showthe\dimen0\relax
+ \ifdim \dimen0>\pagegoal\relax
+ \let\cals@tmp=\cals@tmpII
+ \fi
+ \fi\fi\fi\fi
+\else \let\cals@tmp=\cals@tmpII % tbreak@tokens
+\fi
+\cals@tmp}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\cals@issue@break}
+% By default, force a page break, otherwise use user's tokens
+% set by |\tbreak|.
+% \begin{macrocode}
+\newcommand\cals@issue@break{\ifx \relax\cals@tbreak@tokens \penalty-10000 %
+\else \cals@tbreak@tokens \fi
+\let\cals@tbreak@tokens=\relax
+\let\cals@last@context=n}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\cals@issue@rowsep@alone}
+% Typesets the top (or bottom) frame of a table:
+% combines |\cals@current@rs@above| and |\cals@framers@width|
+% and outputs the row separator.
+% \begin{macrocode}
+\newcommand\cals@issue@rowsep@alone{%
+\setbox0=\hbox{%
+ \hskip\leftskip
+ \cals@rs@sofar@reset
+ \cals@rs@joinOne\cals@framers@width\cals@current@rs@above
+ \cals@rs@sofar@end
+ \hskip\rightskip}%
+\ht0=0pt \dp0=0pt \box0 }
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\cals@issue@rowsep}
+% Combine row separations |\cals@last@rs@below| and |\cals@current@rs@above|,
+% taking into considiration the width of the rule:
+% \begin{itemize}
+% \item n to h, f, b (the top frame): use |\cals@framers@width|
+% and ignore |last@rs@below| because we don't have it
+% \item h to h, b to b, f to f (the usual separator): use |\cals@rs@width|
+% \item for all other combinations (header to body, body to footer),
+% including impossible: use |\cals@bodyrs@width|
+% \end{itemize}
+% \begin{macrocode}
+\newcommand\cals@issue@rowsep{%
+\ifx n\cals@last@context \cals@issue@rowsep@alone \else
+ \ifx \cals@last@context\cals@current@context
+ \let\cals@tmpIII=\cals@rs@width \else
+ \let\cals@tmpIII=\cals@bodyrs@width \fi
+ \setbox0=\hbox{%
+ \hskip\leftskip
+ \cals@rs@sofar@reset
+ \cals@rs@joinTwo\cals@tmpIII\cals@last@rs@below\cals@current@rs@above
+ \cals@rs@sofar@end
+ \hskip\rightskip}%
+ \ht0=0pt \dp0=0pt \box0 %
+\fi}
+% \end{macrocode}
+% \end{macro}
+
+
+% \begin{macro}{\cals@last@row@height}
+% For spanning support, we need to remember the height of the last row
+% \begin{macrocode}
+\newdimen\cals@last@row@height
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\cals@issue@row}
+% Typesets the current row and its decorations, then updates
+% the last context. Regards |\leftskip| and |\rightskip|
+% by putting them inside the row.
+% \begin{macrocode}
+\newcommand\cals@issue@row{%
+% \end{macrocode}
+% Decorations: first the column separation, then the row separation.
+% \begin{macrocode}
+\nointerlineskip
+\setbox0=\vtop{\hbox{\hskip\leftskip \box\cals@current@cs \hskip\rightskip}}%
+ \ht0=0pt \box0
+\nointerlineskip
+\cals@issue@rowsep
+\nointerlineskip
+% \end{macrocode}
+% Output the row, update the last context.
+% \begin{macrocode}
+\hbox{\hskip\leftskip \box\cals@current@row \hskip\rightskip}%
+\let\cals@last@rs@below=\cals@current@rs@below
+\let\cals@last@context=\cals@current@context}
+% \end{macrocode}
+% \end{macro}
+
+% \subsection{Table elements}
+
+% \begin{environment}{\calstable}
+% Setup the parameters and let the row dispatcher to do all the work.
+% \begin{macrocode}
+\newenvironment{calstable}{%
+\let\cals@thead@tokens=\relax
+\let\cals@tfoot@tokens=\relax
+\let\cals@tbreak@tokens=\relax
+\cals@tfoot@height=0pt \relax
+\let\cals@last@context=n%
+\let\cals@current@context=b%
+\parindent=0pt %
+\cals@setpadding{Ag}\cals@setcellprevdepth{Al}%
+\let\cals@borderL=\relax
+\let\cals@borderR=\relax
+\let\cals@borderT=\relax
+\let\cals@borderB=\relax
+}{% End of the table
+\cals@tfoot@tokens\lastrule}
+% \end{macrocode}
+% \end{environment}
+
+% \begin{macro}{\lastrule}
+% Typesets the last rule (bottom frame) of a table chunk.
+% Repeatable calls are ignored.
+% Useful in the macro |\tfoot|.
+% \begin{macrocode}
+\newcommand\lastrule{%
+\ifx r\cals@last@context \relax \else
+ \let\cals@last@context=r%
+ \nointerlineskip
+ \let\cals@current@rs@above=\cals@last@rs@below\cals@issue@rowsep@alone%
+\fi}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\thead}
+% Table: the header. Remember for later use, typeset right now.
+% \begin{macrocode}
+\newcommand\thead[1]{%
+\def\cals@thead@tokens{\let\cals@current@context=h%
+#1\let\cals@current@context=b}%
+\cals@thead@tokens}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\tfoot}
+% Table: the footer. Remember for later use. Right now, typeset
+% to a box to calculate an expected height for the table breaker
+% |\cals@ifbreak|.
+% \begin{macrocode}
+\newcommand\tfoot[1]{%
+\def\cals@tfoot@tokens{\let\cals@current@context=f#1}%
+\setbox0=\vbox{\cals@tfoot@tokens}%
+\cals@tfoot@height=\ht0 \relax}
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\cals@tfoot@height}
+% The height of the footer.
+% \begin{macrocode}
+\newdimen\cals@tfoot@height
+% \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\tbreak}
+% Table: force a table break. Argument should contain something
+% like |\penalty-10000 |.
+% \begin{macrocode}
+\newcommand\tbreak[1]{\def\cals@tbreak@tokens{#1}}
+% \end{macrocode}
+% \end{macro}