summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/source/latex/base/cfgguide.tex
diff options
context:
space:
mode:
Diffstat (limited to 'Master/texmf-dist/source/latex/base/cfgguide.tex')
-rw-r--r--Master/texmf-dist/source/latex/base/cfgguide.tex561
1 files changed, 561 insertions, 0 deletions
diff --git a/Master/texmf-dist/source/latex/base/cfgguide.tex b/Master/texmf-dist/source/latex/base/cfgguide.tex
new file mode 100644
index 00000000000..fac0b2d0132
--- /dev/null
+++ b/Master/texmf-dist/source/latex/base/cfgguide.tex
@@ -0,0 +1,561 @@
+% \iffalse meta-comment
+%
+% Copyright 1993 1994 1995 1996 1997 1998 1999 2000 2001 2002 2003 2004 2005 2006
+% The LaTeX3 Project and any individual authors listed elsewhere
+% in this file.
+%
+% This file is part of the LaTeX base system.
+% -------------------------------------------
+%
+% It may be distributed and/or modified under the
+% conditions of the LaTeX Project Public License, either version 1.3c
+% of this license or (at your option) any later version.
+% The latest version of this license is in
+% http://www.latex-project.org/lppl.txt
+% and version 1.3c or later is part of all distributions of LaTeX
+% version 2005/12/01 or later.
+%
+% This file has the LPPL maintenance status "maintained".
+%
+% The list of all files belonging to the LaTeX base distribution is
+% given in the file `manifest.txt'. See also `legal.txt' for additional
+% information.
+%
+% The list of derived (unpacked) files belonging to the distribution
+% and covered by LPPL is defined by the unpacking scripts (with
+% extension .ins) which are part of the distribution.
+%
+% \fi
+% Filename: cfgguide.tex
+
+\NeedsTeXFormat{LaTeX2e}[1995/12/01]
+
+\documentclass{ltxguide}[1995/11/28]
+
+\newcommand{\filesection}[1]{\subsection{\sffamily{#1}}}
+\newcommand{\iniTeX}{ini\TeX}
+
+\setcounter{secnumdepth}{0}
+
+\title{Configuration options for \LaTeXe}
+
+\author{\copyright~Copyright 1998, 2001, 2003 \LaTeX3 Project Team.\\
+ All rights reserved.}
+
+\date{14 February 2003}
+
+\begin{document}
+
+\maketitle
+
+\tableofcontents
+
+\newpage
+
+\section{Configuring \LaTeX}
+
+Since one of the main aims of the new standard \LaTeX{} is to give all
+users the freedom provided by a reliable document processing system
+linked to a highly portable document format, the number of
+configuration possibilities is strictly limited. The reasons for this
+are explained in more detail in the article
+\textit{Modifying \LaTeX{}} in the file \texttt{modguide.tex}.
+An important consequence of this is that any document that relies on
+any extension package must declare this package within the document
+file; this helps to ensure that the document will work at a different
+site, where the \LaTeX{} system may be configured differently.
+
+Local configuration options are, by convention, placed in
+`configuration files', which have extension |.cfg|. This document
+describes the possibilities for configuration in this release of
+\LaTeX; it also explains how to configure the font definition files to
+take advantage of the available fonts.
+
+The last section considers briefly how to proceed if you require
+further customisation of the formatter.
+
+
+\section{System configuration}
+
+\filesection{texsys.cfg}
+
+This is the only configuration file that \emph{must} be present.
+During installation, if \LaTeX\ cannot find a file with this name
+then a default file |texsys.cfg|, consisting entirely of comments, is
+written out and used. Note that, until this file has been read,
+\LaTeX{} is not able to test reliably whether a given file exists on
+the system.
+
+The contents of the file |texsys.cfg| allow \LaTeX{} to cope with
+various differences between the behaviours of different \TeX{} systems,
+mainly in relation to file handling. The default version of this file
+contains, in its comments, possible settings that may be needed for a
+range of \TeX{} systems. For more information, typeset the file
+|ltdirchk.dtx|.
+
+If you have copied your \LaTeX{} installation from a computer that
+used a different operating system then you may well have a version of
+|texsys.cfg| that will make it difficult to install \LaTeX{} on your
+system. If this happens then start the process again with an empty
+|texsys.cfg| file; this will produce an installation that should, at
+least, allow you to typeset the documentation. However, it is
+possible that \LaTeX{} can still find only those files that are in the
+current directory; in this case you must set the macro |\input@path|
+correctly for your system.
+
+
+\section{Configuring the \LaTeX\ format}
+
+There are four configuration files that enable personal preferences to
+be incorporated into the \LaTeX{} format file |latex.fmt|. The range
+of preferences that can be configured by these files is strictly
+limited as this helps to ensure document portability.
+
+All four files work in the same way: if the file \m{file}|.cfg| is
+found, it will be input by \iniTeX; otherwise a default file
+\m{file}|.ltx| will be input; this is sometimes done via a
+minimal \m{file}|.cfg| that simply inputs \m{file}|.ltx|. Thus,
+providing your own version of any of these |.cfg| files can completely
+override any settings in the corresponding default standard |.ltx|
+file.
+
+
+\subsection{Font configuration}
+
+Before you even think about configuring the font declarations by
+producing a file |fontmath.cfg| or |fonttext.cfg|, you should
+read the documented file |fontdef.dtx|. This is the source file from
+which the default files |fonttext.ltx| and |fontmath.ltx| are
+produced; it contains information concerning the
+contents of the default files and what sort of customisation is
+possible. In particular, it describes in detail the effects of
+individual customisations on document portability including: which
+customisations can be made without endangering the ability to exchange
+documents with other sites (even if the formatting differs); and which
+things should be left untouched because they will make your system so
+different from others that the documents it produces will be
+non-portable.
+
+\textbf{WARNING } Please note that use of either of these font
+configuration files has the following consequences.
+ \begin{itemize}
+ \item Since the content of the file |fontdef.dtx| \emph{might}
+ change in the future, anyone writing a font configuration file
+ must be prepared to update it for use with future releases.
+ \item Documents produced on your system are likely, at best, to be
+ portable only in the sense of being processable at a different
+ site---the actual formatting will not be the same if different
+ fonts are used.
+ \item The \LaTeX3 project team will not be able to support you in
+ diagnosing problems if these cannot be reproduced with a format
+ that does not use any configuration files.
+ \end{itemize}
+
+\filesection{fonttext.cfg}
+
+The file |fonttext.cfg| can contain declarations relating to the use
+of fonts in text modes.
+
+If it exists, it defines which font shapes, families and encodings are
+normally used in text mode, as well as the behavior of font attribute
+commands such as |\textbf| etc.
+
+It could be used, for example, to produce a \LaTeX\ format that, by
+default, typesets documents using Times fonts. Be warned, however,
+that such customisation can have unfortunate consequences; so please
+read carefully this section and the file |fontdef.dtx| below if you
+are thinking of doing this.
+
+Please note carefully the above \textbf{warning}.
+
+\filesection{fontmath.cfg}
+
+The file |fontmath.cfg| can contain declarations relating to the use
+of fonts in math mode.
+
+If it exists, it defines which fonts in which sizes are used in math
+mode, and how they are used. It also defines all the math mode
+commands that `are likely to' depend on the choice of math fonts used
+(e.g.~commands that depend on the position of a glyph in a math font).
+
+The main reason for the existence of this file is to provide for future
+updates when a standard math font encoding is available. Right now we
+do \emph{not} encourage the use of this configuration file other than
+for special applications. Writing a proper configuration file for math
+mode needs expert knowledge!
+
+Please note carefully the above \textbf{warning}.
+
+\filesection{preload.cfg}
+
+The contents of the file |preload.cfg| can control the preloading of
+commonly used fonts. Preloading fonts speeds up the processing of
+documents but, because fonts cannot be `unloaded', you should not
+preload too many; otherwise you may be unable to process documents
+requiring unusual font families.
+
+The default file |preload.ltx| is produced from |preload.dtx|. It
+loads only a few fonts and these are a good choice if you normally use
+documents at the default, 10\,pt, size. If you normally use 11\,pt
+or~12\,pt then the time for \LaTeX\ to startup may be noticeably
+decreased if you preload the corresponding fonts for the sizes you
+use. Similarly, if you normally use a different font family, for
+example Times Roman (|ptm|) then you may want to preload fonts in this
+family rather than the default Computer Modern fonts.
+
+\subsection{Hyphenation configuration}
+
+\filesection{hyphen.cfg}
+
+In order to hyphenate text, \TeX{} must have hyphenation patterns and,
+since these patterns can be loaded only by \iniTeX, the choice of
+which patterns to load must be made when the format is created.
+
+The hyphenation patterns for American English are stored in the file
+named |hyphen.tex|; \LaTeX~2.09 always loaded this file when its
+format was made.
+
+With \LaTeXe{} it is possible to configure which hyphenation patterns
+are to be loaded into the format. When \iniTeX{} is processing
+|latex.ltx|, it looks for a file called |hyphen.cfg|; this file can
+be used to control which hyphenation patterns are loaded. If a file
+|hyphen.cfg| cannot be found then \iniTeX{} will load the file
+|hyphen.ltx|.
+
+The file |hyphen.ltx| loads the file |hyphen.tex| if it can find it;
+otherwise it stops with an error since a format with no hyphenation
+patterns is not very useful. It then sets |\language=0| and it sets
+the values |\lefthyphenmin=2| and |\righthyphenmin=3|, which are
+needed for American English.
+
+Thus, if you want any other patterns to be loaded then you should
+create a file |hyphen.cfg|. For each language for which you wish to
+load hyphenation patterns this file should:
+\begin{itemize}
+\item set |\language=|\m{number};
+\item load the file which contains the hyphenation patterns for that
+ language.
+\end{itemize}
+If the patterns you use require some definitions or assignments then
+a group should be used to keep such changes local to their file.
+
+\textbf{Note.} The hyphenation files that are read in should \emph{only}
+set the hyphenation tables for the language, using the commands
+|\hyphenation| and |\patterns|. In particular they should make no
+assignments to the lowercase/uppercase tables (|\lccode| and
+|\uccode|) and should not make any global command definitions to be
+used after the file has been read. Unfortunately some older
+hyphenation files do contain such settings; thus they are
+\emph{incompatible} with the mechanisms \LaTeX\ uses to ensure
+independence of input and output encodings.
+
+After this the file |hyphen.cfg| should:
+\begin{itemize}
+\item set |\language| to its default value;
+\item set |\lefthyphenmin| and |\righthyphenmin| to the correct values
+ for this default language.
+\end{itemize}
+
+There are packages available, such as `french', that can help you with
+this configuration. The `babel' collection contains many examples of
+setting up a multi-lingual \LaTeX{} format. The documentation in
+|lthyphen.dtx| (the source file for |hyphen.ltx|) also contains some
+useful examples.
+
+[We intend in a future release of \LaTeX{} to provide a set of
+standard commands for use in configuring hyphenation.]
+
+
+\section{Configuring the font definition files}
+
+If you have special fonts available (or if some fonts are unavailable)
+at your site then you may need to produce customised versions of the
+font definition files; these have extension \texttt{.fd} and are read
+by \LaTeX{} to obtain information about the font files installed at your
+system and when to load them.
+
+Although we do not encourage such customisation, you will find
+information about the content of these files and its syntax in the
+documented source file \texttt{cmfonts.fdd} and
+\textit{\LaTeXe{} font selection} in the file \texttt{fntguide.tex}.
+[We hope to be able to provide further information and examples on
+this subject at some time in the future.]
+
+Please note that the use of customised font definition files has the
+following consequences.
+ \begin{itemize}
+ \item Documents produced on your system will, at best, to be
+ portable only in the sense of being processable at a different
+ site---the actual formatting will not be the same if different
+ fonts are used.
+ \item The \LaTeX3 project team will not be able to support you in
+ diagnosing problems if these cannot be reproduced with a format
+ that does not use any customised font definition files.
+ \end{itemize}
+
+Please also note that the whilst licence conditions on the standard
+font definition files allow you to produce a customised version for
+your own use, they do not allow you to distribute such a customised
+font definition file under the original file name!
+
+
+\subsection*{Note to system administrators}
+
+If you install a version of \LaTeX{} with a locally configured font
+set-up then this system is likely to produce documents that are no
+longer `formatting compatible'; for example, the use of different
+default fonts will most likely produce different line and page breaks.
+If you do install, on a multi-user system, a system that is configured
+in such a way that it is not `formatting compatible' then you should
+consider carefully the needs of users who need to create portable
+documents. A good way to provide for their needs is to make
+available, in addition, a standard form of \LaTeX{} without any
+`formatting incompatible' customisations.
+
+
+\section{Configuring compatibility mode}
+
+When processing documents that begin with |\documentstyle|, \LaTeXe{}
+tries to emulate the old \LaTeX~2.09 system as far as possible.
+
+\filesection{latex209.cfg}
+
+Whenever a \LaTeX{} document starts with |\documentstyle|, rather than
+with |\documentclass|, \LaTeX{} assumes that it is a \LaTeX~2.09
+document and therefore processes it in `compatibility mode'. This
+does the following:
+\begin{itemize}
+\item sets the flag |\@compatibilitytrue|;
+\item inputs the file |latex209.def|;
+\item inputs the file |latex209.cfg| if it exists.
+\end{itemize}
+
+The \LaTeX~2.09 set-up allowed the format itself to be customised.
+When making the format with \iniTeX, the process ended with this
+request:
+\begin{quote}\tt
+ Input any local modifications here.
+\end{quote}
+
+If your site did input any modifications at that point then the
+\LaTeXe{} `compatibility mode' will not fully emulate \LaTeX~2.09
+\emph{as installed at your site}. In this case you should put all
+these `local modifications' into a file called |latex209.cfg| and put
+this file in the default input path at your site. These `local
+modifications', although not stored in the format, will then be loaded
+before any old-style document is processed. This should ensure that
+you can continue to process any old documents that made use of this
+local customisation.
+
+
+\section[Configuration files for standard packages and classes]%
+ {Configuration files for standard packages\\ and classes}
+
+Most of the packages in the distribution do not have any associated
+configuration files. The exceptions are listed here.
+
+\filesection{sfonts.cfg}
+
+The file |sfonts.cfg| can contain declarations relating to the use of
+fonts in the slides class.
+If it exists, it is read instead of the file |sfonts.def|.
+
+Please note that use of this configuration file has the following
+consequences.
+ \begin{itemize}
+ \item Since the font set-up for slides has not yet been revised to
+ fit modern usage, the content of this file should be completely
+ updated sometime. Thus anyone writing such a configuration
+ file must be prepared to update it for use with future releases.
+ \item Documents are portable only in the sense of being processable
+ at a different site---the actual formatting will not be the same
+ if different fonts are used.
+ \item The \LaTeX3 project team will not be able to support you in
+ diagnosing problems if these cannot be reproduced with a format
+ that does not use this configuration file.
+ \end{itemize}
+
+
+\filesection{ltnews.cfg}
+
+The file |ltnews.cfg| can be used to customise some aspects of the
+behaviour of the \textsf{ltnews} class; this class is used to typeset
+the the one page newsletter accompanying every \LaTeX{} distribution.
+If this file is present then it is read in at the beginning of the
+file |ltnews.cls|.
+
+
+\filesection{ltxdoc.cfg}
+
+The file |ltxdoc.cfg| can be used to customise some aspects of the
+behaviour of the \textsf{ltxdoc} class; this class is used to typeset
+the documented code in the |.dtx| files. If this file is present then
+it is read in at the beginning of the file |ltxdoc.cls|.
+
+As this file is read before the \textsf{article} class is loaded, you
+may pass options to \textsf{article}. For example the following line
+might be added to |ltxdoc.cfg| to format the documentation for A4 paper
+instead of the default US letter paper size.
+\begin{quote}
+|\PassOptionsToClass{a4paper}{article}|
+\end{quote}
+You should note however, that even if paper size options are specified,
+the \textsf{ltxdoc} class always sets the |\textwidth| parameter to
+355\,pt, to enable 72 columns of text to appear in the verbatim code
+listings. If you really need to over-ride this you could use:
+\begin{quote}
+|\AtEndOfClass{\setlength{\textwidth}{ ...}}|
+\end{quote}
+To set the |\textwidth| to your desired value at the end of the
+\textsf{ltxdoc} class.
+
+By default, most of the |.dtx| documented code files in the
+distribution will produce a `description' section followed by full
+source listing of the package. If you wish to suppress the source
+listings you may add the following line to |ltxdoc.cfg|:
+\begin{quote}
+|\AtBeginDocument{\OnlyDescription}|
+\end{quote}
+
+The documentation of the \textsf{ltxdoc} package, which may be typeset
+from the file |ltxdoc.dtx|, contains more examples of the use of this
+configuration file.
+
+\filesection{ltxguide.cfg}
+
+The class \textsf{ltxguide} is used by the `guide' documents, such as
+this document, in the \LaTeX\ distribution. A configuration file
+|ltxguide.cfg| may be used with this class in a way very similar to
+the customisation of the \textsf{ltxdoc} class described in the
+previous section.
+
+\section{Configuration for other supported packages}
+
+The `graphics' bundle of packages needs two configuration files,
+primarily to specify the driver used to process the |.dvi| file that
+\LaTeX{} produces. More documentation on these files comes with the
+graphics bundle but we mention them here for completeness.
+
+\filesection{graphics.cfg}
+ Normally this file just specifies a default option, by calling
+ |\ExecuteOptions|, for example |\ExecuteOptions{dvips}| or
+ |\ExecuteOptions{textures}|.
+
+ This file is read by the \textsf{graphics} package, and so affects
+ all the packages in the bundle that are based on \textsf{graphics}:
+ \textsf{graphicx}, \textsf{epsfig}, \textsf{lscape}.
+
+\filesection{color.cfg}
+ Normally this file is identical to |graphics.cfg|. It specifies the
+ default driver option for the \textsf{color} package.
+
+\section{Non-standard versions}
+
+If you feel the need to make a version of \LaTeX{} that differs from
+the standard version in ways that are not possible using the above
+configuration possibilities, then you should first read
+\textit{Modifying \LaTeX{}} in the file |modguide.tex|; this
+will probably make you realise that you do not have any such need.
+
+Thus we are sure that you will never need to create a non-standard
+version and, even if you do create one, we hope that you will not
+distribute such a version. Nevertheless, you are permitted to do this
+provided you take great care to do the following:
+\begin{itemize}
+\item
+respect the conditions in legal.txt and individual files regarding
+modification of files and changing the name;
+
+\item
+change all the relevant `|\typeout| banners': i.e.~those produced by
+all the non-standard files in your version and by the format;
+
+\item
+ ensure that the method used to run your version is clearly
+ distinguished from that used to run standard \LaTeX{}; e.g.~by using
+ a command name or menu entry that is clearly different from
+ \texttt{latex} (or \texttt{LaTeX} etc).
+\end{itemize}
+
+\subsection{Examples}
+
+Since we have been prompted, despite our misgivings, to document how
+to do this by members of the League for Programming Freedom, it seems
+appropriate to describe here a possible modification of \LaTeX{} to
+produce a system called fsf\TeX.
+
+To do this, you should create a file called \texttt{fsftex.tex} and
+then run it using \iniTeX{} and the standard \LaTeX{} format.
+
+The contents of the file \texttt{fsftex.tex} should be as shown on
+page \pageref{fsfcode}. The particular changes to the \LaTeX{} kernel
+that you wish to make need to be added to the file at the position
+indicated. You can also choose the extensions you want to use for the
+class and package files in your system.
+
+\newpage
+\label{fsfcode}
+
+\begin{footnotesize}
+\begin{verbatim}
+% fsftex.tex
+%
+% iniTEX Source code to make a `fsftex' format.
+%
+% To make this format on Unix:
+%
+% initex \&latex fsftex
+%
+% Then to run the format on file.tex:
+%
+% tex &fsftex file
+%
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+% *** VERY IMPORTANT!!! ***
+% Change the typeout banner so users know that they
+% are NOT running Standard LaTeX.
+\everyjob{\typeout{fsfTeX 1.0 based on LaTeX2e \fmtversion}}
+\makeatletter
+
+% fsfTeX changes some LaTeX internals:
+% ... put what you like here ...
+\def \fsf@xxxx {Some arbitrary \emph{freely modifiable} code goes here}
+
+% fsfTeX class files have extension .fcl (this week):
+\def \@clsextension {fcl}
+
+% fsfTeX package files have extension .fsy:
+\def \@pkgextension {fsy}
+
+% Change the file handling so that when a fsfTeX package or class
+% is not available, the standard LaTeX file will be read.
+%
+% For example, \documentclass{article} will load article.fcl if such
+% a file exists, but article.cls otherwise. This allows arbitrary
+% processing on `article' documents without changing the standard
+% article.cls file.
+
+\let\fsf@missingfileerror\@missingfileerror
+
+\def\@missingfileerror#1#2{%
+ \ifx #2\@clsextension
+ \InputIfFileExists {#1.cls}%
+ {\wlog {fsfTeX: loading #1.cls rather than #1.#2.}}%
+ {\fsf@missingfileerror {#1}{#2}}%
+ \else
+ \ifx #2\@pkgextension
+ \InputIfFileExists {#1.sty}%
+ {\wlog {fsfTeX: loading #1.sty rather than #1.#2.}}%
+ {\fsf@missingfileerror {#1}{#2}}%
+ \else
+ \fsf@missingfileerror {#1}{#2}%
+ \fi
+ \fi
+}
+
+\makeatother
+\dump
+\end{verbatim}
+\end{footnotesize}
+
+\end{document}