diff options
Diffstat (limited to 'Master/texmf-dist/source/latex/amsaddr')
| -rw-r--r-- | Master/texmf-dist/source/latex/amsaddr/amsaddr.dtx | 347 | ||||
| -rw-r--r-- | Master/texmf-dist/source/latex/amsaddr/amsaddr.ins | 45 |
2 files changed, 392 insertions, 0 deletions
diff --git a/Master/texmf-dist/source/latex/amsaddr/amsaddr.dtx b/Master/texmf-dist/source/latex/amsaddr/amsaddr.dtx new file mode 100644 index 00000000000..478476a2e12 --- /dev/null +++ b/Master/texmf-dist/source/latex/amsaddr/amsaddr.dtx @@ -0,0 +1,347 @@ +% \iffalse meta-comment +% +% Copyright 2006 Jérôme Lelong <jerome.lelong@gmail.com> +% +% It may be distributed and/or modified under the +% conditions of the LaTeX Project Public License, either version 1.3c +% of this license or (at your option) any later version. +% The latest version of this license is in +% http://www.latex-project.org/lppl.txt +% and version 1.3c or later is part of all distributions of LaTeX +% version 2005/12/01 or later. +% +% +% \fi +% \iffalse +%<*driver> +\ProvidesFile{amsaddr.dtx} +%</driver> +%<class>\NeedsTeXFormat{LaTeX2e}[1999/12/01] +%<class>\ProvidesClass{amsaddr} +%<*class> + [2006/12/12 v1.0 .dtx amsaddr file] +%</class> +% +%<*driver> +\documentclass{ltxdoc} +\usepackage{a4} +\EnableCrossrefs +\CodelineIndex +\RecordChanges +\begin{document} + \DocInput{amsaddr.dtx} + \PrintIndex +\end{document} +%</driver> +% \fi +% +% \GetFileInfo{amsaddr.dtx} +% \CheckSum{329} +% +% \CharacterTable +% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z +% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z +% Digits \0\1\2\3\4\5\6\7\8\9 +% Exclamation \! Double quote \" Hash (number) \# +% Dollar \$ Percent \% Ampersand \& +% Acute accent \' Left paren \( Right paren \) +% Asterisk \* Plus \+ Comma \, +% Minus \- Point \. Solidus \/ +% Colon \: Semicolon \; Less than \< +% Equals \= Greater than \> Question mark \? +% Commercial at \@ Left bracket \[ Backslash \\ +% Right bracket \] Circumflex \^ Underscore \_ +% Grave accent \` Left brace \{ Vertical bar \| +% Right brace \} Tilde \~} +% +% +% \changes{v1.0}{2004/11/05}{Initial version} +% +% \GetFileInfo{amsaddr.dtx} +% +% \DoNotIndex{\newcommand,\newenvironment} +% +% \date{\today} +% \title{The \textsf{amsaddr} class\thanks{This document +% corresponds to \textsf{amsaddr}~\fileversion, dated \filedate.}} +% \author{J\'er\^ome Lelong \\ \texttt{jerome.lelong@gmail.com}} +% +% \maketitle +% +% \begin{abstract} +% This package is intended to be used with the \textsf{amsart} documentclass only. It +% lets you move the authors' affiliations either just below the +% authors' names on the front page or as footnotes on the first page. The email +% addresses are always listed as a footnote on the front page. +% \end{abstract} +% +% +% \tableofcontents +% +% \section{License} +% +% This package is copyright \textcopyright\ 2006 by: +% +% \begin{quote} +% J\'er\^ome Lelong, +% Ecole des Ponts (CERMICS)\\ +% Paris, France\\ +% E-Mail: \texttt{jerome.lelong@gmail.com} +% \end{quote} +% +% This program can be redistributed and/or modified under the terms +% of the LaTeX Project Public License, distributed from CTAN +% archives available from \texttt{http://www.latex-project.org/lppl.txt}; either +% version 1.3c of the License, or (at your option) any later version. +% +% +% \section{Usage} +% +% +% To use this package, you need to include the directive |\usepackage{amsaddr}| in your +% |.tex| file. Alternatively, you may also use it with the |foot| option +% |\usepackage[foot]{amsaddr}|. When using the |foot| option, the adresses are put as +% footnotes on the first page of the document. +% +% A typical usage looks like the following +% +% \begin{verbatim} +% \author{author one and author two} +% \address{common address of authors one and two} +% +% \author{author three} +% \address{author three address} +% +% \email{list of emails} +% \end{verbatim} +% +% If |amsaddr| is used without the |foot| option, the addresses declared with the +% |\address| command are printed just below the authors'names declared with the +% preceeding |\author| command. The emails appear as a footnote like this +% \\ +% +% {\it E-mail addresses:} {\texttt{email one}, \texttt{email two}, and so on} +% \\ +% +% If the option |foot| was passed to the package, you may consider numbering +% authors' names so that you can use numbered footnotes for the affiliations. +% +% \begin{verbatim} +% \author{author one$^1$ and author two$^1$} +% \address{$^1$common address of authors one and two} +% +% \author{author three$^2$} +% \address{$^2$author three address} +% +% \email{list of emails} +% \end{verbatim} +% +% As in standard |amsart| documents, an option can be passed to the |\author| command +% to specify the replacement for the author's name on the running headers. +% +%\begin{center} +% \begin{verbatim} +%\author[header name of the author]{author name} +% \end{verbatim} +%\end{center} +% +% +% \StopEventually{} +% +% \section{Implementation} +% +% \begin{macrocode} + \def\filename{amsaddr} + \def\fileversion{v1.0} + \def\filedate{2006/12/12} + \ifx\protected@edef\@undefined + \let\protected@edef\edef + \fi +% \end{macrocode} +% +% The |foot| option enables to move the affiliation related material to the bottom of +% the fisrt page as footnotes. +% +% \begin{macrocode} +\newif\if@footaddr +\DeclareOption{foot}{\@footaddrtrue} +\ProcessOptions\relax +% \end{macrocode} +% +% +% \begin{macro}{\author} +% +% The |\author| macro can be used the same way as in other |amsart| documents. The +% variable |g@author| is used to count the total number of authors. +% +% \begin{macrocode} +\newcounter{g@author} +\setcounter{g@author}{0} +\renewcommand{\author}[2][]{% + \stepcounter{g@author} + \ifx\@empty\authors + \gdef\authors{#2}% + \else + \g@addto@macro\authors{\and#2}% + \fi + \g@addto@macro\addresses{\author{#2}}% + \@ifnotempty{#1}{% + \ifx\@empty\shortauthors + \gdef\shortauthors{#1}% + \else + \g@addto@macro\shortauthors{\and#1}% + \fi + }% +} +% \end{macrocode} +% \end{macro} +% +% +% \begin{macro}{\email} +% The |\email| command is used to specify the different authors. The email addresses +% can be specified in a unique command or using separate invocations of the command. +% \begin{macrocode} +\let\emails\@empty +\renewcommand{\email}[2][]{ + \ifx\@empty\emails + \gdef\emails{\mbox{#2}} + \else + \g@addto@macro\emails{,\space\mbox{#2}} + \fi +} +% \end{macrocode} +% \end{macro} +% +% Process |\author| and |\address| macros +% +% \begin{macrocode} +\def\@set@authors@addresses{\par + \skip@30\p@ + \centering + \begingroup + \def\author##1{\par\vskip\skip@\MakeUppercase{##1}}% + \def\\{\protect\linebreak}% + \centering + \def\address##1##2{\par\addvspace\bigskipamount% + {\itshape\ignorespaces##2}% + }% + \def\email##1##2{% + \@ifnotempty{##2}{, \ignorespaces{\ttfamily##2}}}% + \def\curraddr##1##2{}% + \def\urladdr##1##2{}% + \addresses + \endgroup +} +% \end{macrocode} +% +% \begin{macro}{\@setfoot@addresses} +% The |\@setfoot@addresses| macro is used to print the addresses as footnotes. This +% macro is called when the |foot| option is passed to the package. +% \begin{macrocode} +\def\@setfoot@addresses{ + \def\author##1{}% + \def\\{\unskip, \ignorespaces}% + \newif\if@firstaddr + \@firstaddrtrue + \def\address##1##2{% + \if@firstaddr\@firstaddrfalse\else\par\fi + \@ifnotempty{##1}{(\ignorespaces##1\unskip) }% + {\scshape\ignorespaces##2}% + }% + \def\email##1##2{}% + \def\curraddr##1##2{}% + \def\urladdr##1##2{}% + \addresses +} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\@setaddresses} +% The |\@setaddresses| macro is used to process the addresses when they are to appear +% just below the authors' names on the front page. +% \begin{macrocode} +\def\@setaddresses{\par + \nobreak \begingroup + \def\author##1{\nobreak\addvspace\bigskipamount}% + \def\\{\unskip, \ignorespaces}% + \interlinepenalty\@M + \def\address##1##2{}% + \def\email##1##2{}% + \def\curraddr##1##2{\begingroup + \@ifnotempty{##2}{\nobreak\indent{\itshape Current address}% + \@ifnotempty{##1}{, \ignorespaces##1\unskip}\/:\space + ##2\par}\endgroup}% + \def\urladdr##1##2{\begingroup + \@ifnotempty{##2}{\nobreak\indent{\itshape URL}% + \@ifnotempty{##1}{, \ignorespaces##1\unskip}\/:\space + \ttfamily##2\par}\endgroup}% + \addresses + \endgroup +} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\@setemails} +% The |\@setemails| macro is called by the |\maketitle| command to print the email +% addresses. +% \begin{macrocode} +\def\@setemails{% + \ifnum\theg@author > 1 + \mbox{{\itshape E-mail addresses}:\space}{\ttfamily\emails}. + \else + \mbox{{\itshape\space E-mail \space address}:\space}{\ttfamily\emails}. + \fi% +} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\@maketitle} +% The |\@maketitle| macro is used to replace the standard |\makefile| command. Before +% issuing this command, no authors, affiliations, nor emails are printed. +% \begin{macrocode} +\def\@maketitle{% + \normalfont\normalsize + \let\@makefnmark\relax \let\@thefnmark\relax + \if@footaddr\@footnotetext{\@setfoot@addresses}\fi + \ifx\@empty\emails\else \@footnotetext{\@setemails}\fi + \ifx\@empty\@date\else \@footnotetext{\@setdate}\fi + \ifx\@empty\@subjclass\else \@footnotetext{\@setsubjclass}\fi + \ifx\@empty\@keywords\else \@footnotetext{\@setkeywords}\fi + \ifx\@empty\thankses\else \@footnotetext{% + \def\par{\let\par\@par}\@setthanks}\fi + \@mkboth{\@nx\shortauthors}{\@nx\shorttitle}% + \global\topskip42\p@\relax % 5.5pc " " " " " + \@settitle + \if@footaddr\ifx\@empty\authors \else \@setauthors \fi + \else% + \ifx\@empty\authors \else \@set@authors@addresses \fi + \fi + \ifx\@empty\@dedicatory + \else + \baselineskip18\p@ + \vtop{\centering{\footnotesize\itshape\@dedicatory\@@par}% + \global\dimen@i\prevdepth}\prevdepth\dimen@i + \fi + \@setabstract + \normalsize + \if@titlepage + \newpage + \else + \dimen@34\p@ \advance\dimen@-\baselineskip + \vskip\dimen@\relax + \fi + \let\addresses\relax + \let\@setfoot@addresses\relax +} % end \@maketitle +% \end{macrocode} +% \end{macro} +% +% In |amsart| documents, affiliations are normally printed by the |\enddoc@text| +% command . To avoid a double printing of the considered material, the |\enddoc@text| +% macro has to be redefined. +% +% \begin{macrocode} +\def\enddoc@text{ + \ifx\@empty\addresses\else \@setaddresses\fi +} +% \end{macrocode} +% \Finale +\endinput
\ No newline at end of file diff --git a/Master/texmf-dist/source/latex/amsaddr/amsaddr.ins b/Master/texmf-dist/source/latex/amsaddr/amsaddr.ins new file mode 100644 index 00000000000..501e7b15be4 --- /dev/null +++ b/Master/texmf-dist/source/latex/amsaddr/amsaddr.ins @@ -0,0 +1,45 @@ +%% +%% Copyright (C) 2006 by Jérôme Lelong <jerome.lelong@gmail.com> +%% +%% This file may be distributed and/or modified under the conditions of +%% the LaTeX Project Public License, either version 1.3c of this license +%% or (at your option) any later version. The latest version of this +%% license is in: +%% +%% http://www.latex-project.org/lppl.txt +%% + +\input docstrip.tex +\keepsilent + +\preamble + +Copyright (C) 2006 by Jérôme Lelong <jerome.lelong@gmail.com> + +This file may be distributed and/or modified under the conditions of +the LaTeX Project Public License, either version 1.3c of this license +or (at your option) any later version. The latest version of this +license is in: + + http://www.latex-project.org/lppl.txt + +\endpreamble + +\generate{\file{amsaddr.sty}{\from{amsaddr.dtx}{package}}} + +\obeyspaces +\Msg{*************************************************************} +\Msg{* *} +\Msg{* To finish the installation you have to move the following *} +\Msg{* file into a directory searched by TeX: *} +\Msg{* *} +\Msg{* amsaddr.sty *} +\Msg{* *} +\Msg{* To produce the documentation run the file amsaddr.dtx *} +\Msg{* through LaTeX. *} +\Msg{* *} +\Msg{* Happy TeXing! *} +\Msg{* *} +\Msg{*************************************************************} + +\endbatchfile |