diff options
Diffstat (limited to 'Master/texmf-dist/source/latex-dev/tools')
32 files changed, 192 insertions, 194 deletions
diff --git a/Master/texmf-dist/source/latex-dev/tools/afterpage.dtx b/Master/texmf-dist/source/latex-dev/tools/afterpage.dtx index 3fa341aa531..600d221cb63 100644 --- a/Master/texmf-dist/source/latex-dev/tools/afterpage.dtx +++ b/Master/texmf-dist/source/latex-dev/tools/afterpage.dtx @@ -1,6 +1,6 @@ % \iffalse meta-comment % -% Copyright (C) 1993-2019 +% Copyright (C) 1993-2020 % % The LaTeX3 Project and any individual authors listed elsewhere % in this file. diff --git a/Master/texmf-dist/source/latex-dev/tools/afterpage.ins b/Master/texmf-dist/source/latex-dev/tools/afterpage.ins index 9764bdac6d8..96cba1ed0ca 100644 --- a/Master/texmf-dist/source/latex-dev/tools/afterpage.ins +++ b/Master/texmf-dist/source/latex-dev/tools/afterpage.ins @@ -3,31 +3,31 @@ %% driver files from the doc files in this package when run through %% LaTeX or TeX. %% -%% Copyright (C) 1993-2019 +%% Copyright (C) 1993-2020 %% The LaTeX3 Project and any individual authors listed elsewhere -%% in this file. -%% +%% in this file. +%% %% This file is part of the Standard LaTeX `Tools Bundle'. %% ------------------------------------------------------- -%% +%% %% It may be distributed and/or modified under the %% conditions of the LaTeX Project Public License, either version 1.3c %% of this license or (at your option) any later version. %% The latest version of this license is in %% https://www.latex-project.org/lppl.txt -%% and version 1.3c or later is part of all distributions of LaTeX +%% and version 1.3c or later is part of all distributions of LaTeX %% version 2005/12/01 or later. -%% +%% %% As this file contains legal notices, it is NOT PERMITTED to modify %% this file in any way that the legal information placed into %% generated files is changed (i.e., the files generated when the %% original file is executed). This restriction does not apply if %% (parts of) the content is reused in a different WORK producing its %% own generated files. -%% +%% %% The list of all files belonging to the `Tools Bundle' is %% given in the file `manifest.txt'. -%% +%% %% %% --------------- start of docstrip commands ------------------ %% @@ -45,9 +45,9 @@ The source is maintained by the LaTeX Project team and bug reports for it can be opened at https://latex-project.org/bugs/ (but please observe conditions on bug reports sent to that address!) -Copyright (C) 1993-2019 +Copyright (C) 1993-2020 The LaTeX3 Project and any individual authors listed elsewhere -in this file. +in this file. This file was generated from file(s) of the Standard LaTeX `Tools Bundle'. -------------------------------------------------------------------------- @@ -57,7 +57,7 @@ conditions of the LaTeX Project Public License, either version 1.3c of this license or (at your option) any later version. The latest version of this license is in https://www.latex-project.org/lppl.txt -and version 1.3c or later is part of all distributions of LaTeX +and version 1.3c or later is part of all distributions of LaTeX version 2005/12/01 or later. This file may only be distributed together with a copy of the LaTeX diff --git a/Master/texmf-dist/source/latex-dev/tools/array.dtx b/Master/texmf-dist/source/latex-dev/tools/array.dtx index 5590b0a1369..acfa5609373 100644 --- a/Master/texmf-dist/source/latex-dev/tools/array.dtx +++ b/Master/texmf-dist/source/latex-dev/tools/array.dtx @@ -1,6 +1,6 @@ % \iffalse meta-comment % -% Copyright (C) 1993-2019 +% Copyright (C) 1993-2020 % % The LaTeX3 Project and any individual authors listed elsewhere % in this file. @@ -284,7 +284,7 @@ % \hline\hline % w\{align\}\{width\} & Sets the cell content in a box of the % specified \texttt{width} aligned according to -% the \texttt{align} parameter which could be +% the \texttt{align} parameter which could be % either \texttt{l}, \texttt{c} or % \texttt{r}. Works essentially like % =\makebox[=width=][=align=]{=cell=}= so @@ -633,10 +633,10 @@ % \texttt{m}. As a result that cell was vertically centered with that % space inside, resulting in a strange offset. Since 2.4f, this space % is now added after centering the cell. -% +% % A similar problem happened when "\extrarowheight" was used. For that % reason m-cells now manually position the cell content which -% allows to ignore this extra space request during the vertical aligment. +% allows to ignore this extra space request during the vertical aligment. % % % \subsection{Bugs and Features} @@ -1323,7 +1323,7 @@ % \changes{v2.4f}{2017/11/04}{Managing m-cells without \cs{vcenter}} % \begin{macrocode} % \let\do@row@strut\relax -% \let\ar@align@mcell\relax +% \let\ar@align@mcell\relax % \end{macrocode} % Now we remove possible $*$-forms in the user preamble with the % command =\@xexpast=. As we already know, this command saves @@ -1551,7 +1551,7 @@ \hfil % \end{macrocode} % We also add a space of 1sp just in case the first thing in the -% cell is a command doing an =\unskip=. +% cell is a command doing an =\unskip=. % \changes{v2.4k}{2018/12/30}{Add extra \cs{hskip} to guard against an % \cs{unskip} at the start of a c-column cell (gh/102)} % \begin{macrocode} @@ -1604,7 +1604,7 @@ % mode. Therefore we start with a~=$=. % \changes{v2.4f}{2017/11/04}{Managing m-cells without \cs{vcenter}} % \begin{macrocode} - \setbox\ar@mcellbox\vbox + \setbox\ar@mcellbox\vbox % \end{macrocode} % The part of the templates which is the same in all three cases % (\texttt{p}, \texttt{m} and \texttt{b}) @@ -1618,7 +1618,7 @@ % \changes{v2.4e}{2016/10/07}{Fixing SX68732} % \changes{v2.4f}{2017/11/04}{Managing m-cells without \cs{vcenter}} % \begin{macrocode} - \@startpbox{\@nextchar}\insert@column \@endpbox + \@startpbox{\@nextchar}\insert@column \@endpbox \ar@align@mcell \do@row@strut \or % \end{macrocode} @@ -2296,7 +2296,7 @@ % environments (via =\multicolumn=) are impossible. % For 25 years or so =\@halignto= was set globally (to save space on the % save stack, but that was a mistake: if there is a tabular in the -% output routine (e.g., in the running header) then that tabular is +% output routine (e.g., in the running header) then that tabular is % able overwrite the =\@halignto= % setting of a tabular in the main text resulting in a very weird error. % \changes{v2.4d}{2016/10/06}{\cs{@halignto} set locally (pr/4488)} @@ -2613,7 +2613,7 @@ % it is the equivalent of the primitive "\show" command for macro % definitions. All we need to do is locally redefine "\NC@do" to take % its argument (say `C') and then "\show" the (slightly modified) -% definition of "\NC@rewrite@C". Actually as the the list always +% definition of "\NC@rewrite@C". Actually as the list always % starts off with "\NC@do *" and we do not want to print the % definition of the $*$-form, define "\NC@do" to throw away the first % item in the list, and then redefine itself to print the rest of the @@ -2729,9 +2729,9 @@ % \changes{v2.4f}{2017/11/04}{Managing m-cells without \cs{vcenter}} % \begin{macrocode} \def\@mkpream#1{\gdef\@preamble{}\@lastchclass 4 \@firstamptrue - \let\@sharp\relax + \let\@sharp\relax % \end{macrocode} -% +% % \changes{v2.4j}{2018/11/13}{Do not expand argument of % \cs{@startpbox} while building the tabular preamble (sx/459285)} % The "\@startpbox" (which is called for "p", "m" or "b" columns) @@ -2747,7 +2747,7 @@ \def\@startpbox##1{\unexpanded\expandafter{\expandafter \@startpbox\expandafter{##1}}}\let\@endpbox\relax \let\do@row@strut\relax - \let\ar@align@mcell\relax + \let\ar@align@mcell\relax % \end{macrocode} % Now we remove possible $*$-forms and user-defined column % specifiers in the user preamble by repeatedly executing the list @@ -2953,7 +2953,7 @@ % % The problem in this case is that if the optional argument "[b]" % is used we do want the reference point of the tabular be at the -% baseline of the last row but at the same time do want the the +% baseline of the last row but at the same time do want the % depth of this last line increased by "\extratabsurround" without % changing the placement "\hline". % @@ -3076,7 +3076,7 @@ <{\end{lrbox}% \let\hss\hfil \makebox[#2][#1]{\unhbox\ar@cellbox}}} -% \end{macrocode} +% \end{macrocode} % This is a bit sneaky, as it temporarily disables "\hss", but % given that we know what goes into that box it should be % sufficient. @@ -3089,4 +3089,3 @@ % \Finale % \endinput - diff --git a/Master/texmf-dist/source/latex-dev/tools/bm.dtx b/Master/texmf-dist/source/latex-dev/tools/bm.dtx index 2216dcea077..096f6c4bc2a 100644 --- a/Master/texmf-dist/source/latex-dev/tools/bm.dtx +++ b/Master/texmf-dist/source/latex-dev/tools/bm.dtx @@ -1,6 +1,6 @@ % \iffalse meta-comment % -% Copyright (C) 1993-2019 +% Copyright (C) 1993-2020 % % The LaTeX3 Project and any individual authors listed elsewhere % in this file. @@ -837,7 +837,7 @@ \let\ifmmode\iftrue % \end{macrocode} % We have to ensure that the math alphabets have definitions that -% correspond the the ``bold'' math version we are going to switch +% correspond the ``bold'' math version we are going to switch % to. As these definitions are globally assigned when a math % version is changed it is likely that right now we have those of % the normal math version active. Argument |#3| holds either diff --git a/Master/texmf-dist/source/latex-dev/tools/bm.ins b/Master/texmf-dist/source/latex-dev/tools/bm.ins index a148cb93efa..e963d1d88e2 100644 --- a/Master/texmf-dist/source/latex-dev/tools/bm.ins +++ b/Master/texmf-dist/source/latex-dev/tools/bm.ins @@ -3,31 +3,31 @@ %% driver files from the doc files in this package when run through %% LaTeX or TeX. %% -%% Copyright (C) 1993-2019 +%% Copyright (C) 1993-2020 %% The LaTeX3 Project and any individual authors listed elsewhere -%% in this file. -%% +%% in this file. +%% %% This file is part of the Standard LaTeX `Tools Bundle'. %% ------------------------------------------------------- -%% +%% %% It may be distributed and/or modified under the %% conditions of the LaTeX Project Public License, either version 1.3c %% of this license or (at your option) any later version. %% The latest version of this license is in %% https://www.latex-project.org/lppl.txt -%% and version 1.3c or later is part of all distributions of LaTeX +%% and version 1.3c or later is part of all distributions of LaTeX %% version 2005/12/01 or later. -%% +%% %% As this file contains legal notices, it is NOT PERMITTED to modify %% this file in any way that the legal information placed into %% generated files is changed (i.e., the files generated when the %% original file is executed). This restriction does not apply if %% (parts of) the content is reused in a different WORK producing its %% own generated files. -%% +%% %% The list of all files belonging to the `Tools Bundle' is %% given in the file `manifest.txt'. -%% +%% %% %% --------------- start of docstrip commands ------------------ %% @@ -45,9 +45,9 @@ The source is maintained by the LaTeX Project team and bug reports for it can be opened at https://latex-project.org/bugs/ (but please observe conditions on bug reports sent to that address!) -Copyright (C) 1993-2019 +Copyright (C) 1993-2020 The LaTeX3 Project and any individual authors listed elsewhere -in this file. +in this file. This file was generated from file(s) of the Standard LaTeX `Tools Bundle'. -------------------------------------------------------------------------- @@ -57,7 +57,7 @@ conditions of the LaTeX Project Public License, either version 1.3c of this license or (at your option) any later version. The latest version of this license is in https://www.latex-project.org/lppl.txt -and version 1.3c or later is part of all distributions of LaTeX +and version 1.3c or later is part of all distributions of LaTeX version 2005/12/01 or later. This file may only be distributed together with a copy of the LaTeX diff --git a/Master/texmf-dist/source/latex-dev/tools/calc.dtx b/Master/texmf-dist/source/latex-dev/tools/calc.dtx index 0bc90f736ba..62fe27489b2 100644 --- a/Master/texmf-dist/source/latex-dev/tools/calc.dtx +++ b/Master/texmf-dist/source/latex-dev/tools/calc.dtx @@ -1,6 +1,6 @@ % \iffalse meta-comment % -% Copyright (C) 1993-2019 +% Copyright (C) 1993-2020 % % The LaTeX3 Project and any individual authors listed elsewhere % in this file. diff --git a/Master/texmf-dist/source/latex-dev/tools/dcolumn.dtx b/Master/texmf-dist/source/latex-dev/tools/dcolumn.dtx index 38a4ab0da2c..1899cce5560 100644 --- a/Master/texmf-dist/source/latex-dev/tools/dcolumn.dtx +++ b/Master/texmf-dist/source/latex-dev/tools/dcolumn.dtx @@ -1,6 +1,6 @@ % \iffalse meta-comment % -% Copyright (C) 1993-2019 +% Copyright (C) 1993-2020 % % The LaTeX3 Project and any individual authors listed elsewhere % in this file. diff --git a/Master/texmf-dist/source/latex-dev/tools/delarray.dtx b/Master/texmf-dist/source/latex-dev/tools/delarray.dtx index 8814fc2a586..17cac2052cb 100644 --- a/Master/texmf-dist/source/latex-dev/tools/delarray.dtx +++ b/Master/texmf-dist/source/latex-dev/tools/delarray.dtx @@ -1,6 +1,6 @@ % \iffalse meta-comment % -% Copyright (C) 1993-2019 +% Copyright (C) 1993-2020 % % The LaTeX3 Project and any individual authors listed elsewhere % in this file. diff --git a/Master/texmf-dist/source/latex-dev/tools/enumerate.dtx b/Master/texmf-dist/source/latex-dev/tools/enumerate.dtx index 984d36d4157..3ce463e6015 100644 --- a/Master/texmf-dist/source/latex-dev/tools/enumerate.dtx +++ b/Master/texmf-dist/source/latex-dev/tools/enumerate.dtx @@ -1,6 +1,6 @@ % \iffalse meta-comment % -% Copyright (C) 1993-2019 +% Copyright (C) 1993-2020 % % The LaTeX3 Project and any individual authors listed elsewhere % in this file. diff --git a/Master/texmf-dist/source/latex-dev/tools/fileerr.dtx b/Master/texmf-dist/source/latex-dev/tools/fileerr.dtx index 3b5895a5f61..16a95e28203 100644 --- a/Master/texmf-dist/source/latex-dev/tools/fileerr.dtx +++ b/Master/texmf-dist/source/latex-dev/tools/fileerr.dtx @@ -1,6 +1,6 @@ % \iffalse meta-comment % -% Copyright (C) 1993-2019 +% Copyright (C) 1993-2020 % % The LaTeX3 Project and any individual authors listed elsewhere % in this file. diff --git a/Master/texmf-dist/source/latex-dev/tools/fontsmpl.dtx b/Master/texmf-dist/source/latex-dev/tools/fontsmpl.dtx index 961bdda71fc..a5fb2964a98 100644 --- a/Master/texmf-dist/source/latex-dev/tools/fontsmpl.dtx +++ b/Master/texmf-dist/source/latex-dev/tools/fontsmpl.dtx @@ -1,6 +1,6 @@ % \iffalse meta-comment % -% Copyright (C) 1993-2019 +% Copyright (C) 1993-2020 % % The LaTeX3 Project and any individual authors listed elsewhere % in this file. diff --git a/Master/texmf-dist/source/latex-dev/tools/ftnright.dtx b/Master/texmf-dist/source/latex-dev/tools/ftnright.dtx index 5739172f85d..e5fffdfcd92 100644 --- a/Master/texmf-dist/source/latex-dev/tools/ftnright.dtx +++ b/Master/texmf-dist/source/latex-dev/tools/ftnright.dtx @@ -1,6 +1,6 @@ % \iffalse meta-comment % -% Copyright (C) 1993-2019 +% Copyright (C) 1993-2020 % % The LaTeX3 Project and any individual authors listed elsewhere % in this file. diff --git a/Master/texmf-dist/source/latex-dev/tools/indentfirst.dtx b/Master/texmf-dist/source/latex-dev/tools/indentfirst.dtx index 16b99653cd7..7123be04c54 100644 --- a/Master/texmf-dist/source/latex-dev/tools/indentfirst.dtx +++ b/Master/texmf-dist/source/latex-dev/tools/indentfirst.dtx @@ -1,6 +1,6 @@ % \iffalse meta-comment % -% Copyright (C) 1993-2019 +% Copyright (C) 1993-2020 % % The LaTeX3 Project and any individual authors listed elsewhere % in this file. diff --git a/Master/texmf-dist/source/latex-dev/tools/layout.dtx b/Master/texmf-dist/source/latex-dev/tools/layout.dtx index 848eb54fb25..8918ffdca48 100644 --- a/Master/texmf-dist/source/latex-dev/tools/layout.dtx +++ b/Master/texmf-dist/source/latex-dev/tools/layout.dtx @@ -1,6 +1,6 @@ % \iffalse meta-comment % -% Copyright (C) 1993-2019 +% Copyright (C) 1993-2020 % % The LaTeX3 Project and any individual authors listed elsewhere % in this file. diff --git a/Master/texmf-dist/source/latex-dev/tools/longtable.dtx b/Master/texmf-dist/source/latex-dev/tools/longtable.dtx index 9a3b5c03b87..004d630fcec 100644 --- a/Master/texmf-dist/source/latex-dev/tools/longtable.dtx +++ b/Master/texmf-dist/source/latex-dev/tools/longtable.dtx @@ -1,6 +1,6 @@ % \iffalse meta-comment % -% Copyright (C) 1993-2019 +% Copyright (C) 1993-2020 % % The LaTeX3 Project and any individual authors listed elsewhere % in this file. @@ -21,7 +21,7 @@ % % \fi % \iffalse -%% File: longtable.dtx Copyright (C) 1990-2019 David Carlisle +%% File: longtable.dtx Copyright (C) 1990-2020 David Carlisle % %<*dtx> \ProvidesFile{longtable.dtx} @@ -31,7 +31,7 @@ %<driver> \ProvidesFile{longtable.drv} % \fi % \ProvidesFile{longtable.dtx} - [2019/02/06 v4.12 Multi-page Table package (DPC)] + [2020/01/07 v4.13 Multi-page Table package (DPC)] % % \iffalse %<*driver> @@ -635,9 +635,9 @@ % "\LTright"& % Glue to the right of the table. \hfill("\fill")\\ % "\LTpre"& -% Glue before the the table. \hfill("\bigskipamount")\\ +% Glue before the table. \hfill("\bigskipamount")\\ % "\LTpost"& -% Glue after the the table. \hfill("\bigskipamount")\\ +% Glue after the table. \hfill("\bigskipamount")\\ % "\LTcapwidth"& % The width of a parbox containing the caption.\hfill(4in)\\ % "LTchunksize"& @@ -1212,6 +1212,8 @@ % \end{macro} % % \begin{macro}{\LT@start} +% % \changes{v4.13}{2020/01/07} +% {fix issue https://github.com/davidcarlisle/dpctex/issues/8} % This macro starts the process of putting the table on the current % page. It is not called until either a "\\" or "\endlongtable" command % ends a chunk, as we do not know until that point which of the four @@ -1219,11 +1221,12 @@ % % It begins by redefining itself, so that the table is only started % once! Until V3.04, was redefined to "\relax", now use "\endgraf" to -% force the page-breaker to wake up. +% force the page-breaker to wake up. The second "\endgraf" is there so +% that "\pagetotal" is updated and so takes "\LTpre" into account. % \begin{macrocode} \def\LT@start{% \let\LT@start\endgraf - \endgraf\penalty\z@\vskip\LTpre + \endgraf\penalty\z@\vskip\LTpre\endgraf % \end{macrocode} % Start a new page if there is not enough room for the table head, foot, % and one extra line. @@ -2031,7 +2034,7 @@ % \end{macrocode} % \end{macro} % -% \subsection{Commands for the the table head and foot} +% \subsection{Commands for the table head and foot} % % \begin{macro}{\LT@end@hd@ft} % The core of "\endhead" and friends. Store the current chunk in the @@ -2127,7 +2130,7 @@ % \end{macrocode} % \changes{v4.12}{2019/02/06}{Color group to match array package} % \begin{macrocode} - \color@endgroup + \color@endgroup \egroup \the\LT@p@ftn \global\LT@p@ftn{}% @@ -2151,4 +2154,3 @@ % % \Finale \endinput - diff --git a/Master/texmf-dist/source/latex-dev/tools/longtable.ins b/Master/texmf-dist/source/latex-dev/tools/longtable.ins index 1fc3c12dfaa..7ada121ea95 100644 --- a/Master/texmf-dist/source/latex-dev/tools/longtable.ins +++ b/Master/texmf-dist/source/latex-dev/tools/longtable.ins @@ -3,31 +3,31 @@ %% driver files from the doc files in this package when run through %% LaTeX or TeX. %% -%% Copyright (C) 1993-2019 +%% Copyright (C) 1993-2020 %% The LaTeX3 Project and any individual authors listed elsewhere -%% in this file. -%% +%% in this file. +%% %% This file is part of the Standard LaTeX `Tools Bundle'. %% ------------------------------------------------------- -%% +%% %% It may be distributed and/or modified under the %% conditions of the LaTeX Project Public License, either version 1.3c %% of this license or (at your option) any later version. %% The latest version of this license is in %% https://www.latex-project.org/lppl.txt -%% and version 1.3c or later is part of all distributions of LaTeX +%% and version 1.3c or later is part of all distributions of LaTeX %% version 2005/12/01 or later. -%% +%% %% As this file contains legal notices, it is NOT PERMITTED to modify %% this file in any way that the legal information placed into %% generated files is changed (i.e., the files generated when the %% original file is executed). This restriction does not apply if %% (parts of) the content is reused in a different WORK producing its %% own generated files. -%% +%% %% The list of all files belonging to the `Tools Bundle' is %% given in the file `manifest.txt'. -%% +%% %% %% --------------- start of docstrip commands ------------------ %% @@ -45,9 +45,9 @@ The source is maintained by the LaTeX Project team and bug reports for it can be opened at https://latex-project.org/bugs/ (but please observe conditions on bug reports sent to that address!) -Copyright (C) 1993-2019 +Copyright (C) 1993-2020 The LaTeX3 Project and any individual authors listed elsewhere -in this file. +in this file. This file was generated from file(s) of the Standard LaTeX `Tools Bundle'. -------------------------------------------------------------------------- @@ -57,7 +57,7 @@ conditions of the LaTeX Project Public License, either version 1.3c of this license or (at your option) any later version. The latest version of this license is in https://www.latex-project.org/lppl.txt -and version 1.3c or later is part of all distributions of LaTeX +and version 1.3c or later is part of all distributions of LaTeX version 2005/12/01 or later. This file may only be distributed together with a copy of the LaTeX diff --git a/Master/texmf-dist/source/latex-dev/tools/multicol.dtx b/Master/texmf-dist/source/latex-dev/tools/multicol.dtx index 5adc4db0da1..39bccef2d78 100644 --- a/Master/texmf-dist/source/latex-dev/tools/multicol.dtx +++ b/Master/texmf-dist/source/latex-dev/tools/multicol.dtx @@ -470,7 +470,7 @@ % `\textsf{minrows}' (default 1). If set to a higher value then the % balancing will have at least that many rows in the first column (and % also all further columns until it runs outs of material). -% +% % Additionally you can set another counter, the `\textsf{unbalance}' % counter, to some positive \meta{number}. This will make all but the % right-most column \meta{number} of lines longer than they would @@ -1339,7 +1339,7 @@ % resetting the |\parshape| in case we are inside some list % environment. The correct indentation for the \mc{} environment in % such a case will be produced by moving the result to the right by -% |\multicol@leftmargin| later on. If we would use the value of of +% |\multicol@leftmargin| later on. If we would use the value of % |\@totalleftmargin| directly then lists inside the \mc{} % environment could cause a shift of the output. % \changes{v1.4l}{1992/08/17}{saved \cs{@totalleftmargin}} @@ -1720,7 +1720,7 @@ % remove any space at the end of the box as we don't want to use % this in balancing. Because of the |\color@endgroup| this can't be % done later in |\balance@columns| as the color command will hide -% it. +% it. % \changes{v1.8c}{2013/11/03}{Add \cs{color@endgroup} to prevent color leak} % \changes{v1.8f}{2014/06/19}{Discard spaces before adding \cs{color@endgroup}} % \begin{macrocode} @@ -1762,7 +1762,7 @@ \else % \end{macrocode} % If there was a |\columnbreak| on the very last line all material -% will have been moved to the |\colbreak@box|. Thus the the galley +% will have been moved to the |\colbreak@box|. Thus the galley % will be empty and no output routine gets called so that the text % is lost. To avoid this problem (though unlikely) we check if the % current galley is empty and the |\colbreak@box| contains text and @@ -1959,10 +1959,10 @@ % \end{macrocode} % To allow checking whether some macro is used within the \mc{} % environment the counter |\col@number| gets a default of |1| -% outside the the environment. +% outside the environment. % \changes{v1.3d}{1991/10/23}{\cs{col@number} set to one} -% \changes{v1.8o}{2016/02/08}{\cs{col@number} already initialized in the -% kernel, so not initializing it in the package +% \changes{v1.8o}{2016/02/08}{\cs{col@number} already initialized in the +% kernel, so not initializing it in the package % in case the document is in two-column (pr/4435)} % \begin{macrocode} %\col@number = 1 @@ -2197,12 +2197,12 @@ % would be allowed a depth of |\@maxdepth|. So we allow shrinking by % that amount. This only makes a difference if the box would % otherwise become overfull and shrinking never exceeds the -% specified value, so we should be fine. +% specified value, so we should be fine. % \changes{v1.8h}{2014/09/12}{Macro added (pr/4395)} % \changes{v1.8j}{2015/03/07}{Use only `0.0001fil' for stretching} % \changes{v1.8x}{2019/10/15}{Use \cs{@maxdepth} not \cs{maxdepth} (gh/190)} % \begin{macrocode} -\def\vfilmaxdepth{\vskip \z@ \@plus .0001fil +\def\vfilmaxdepth{\vskip \z@ \@plus .0001fil \@minus \@maxdepth} % \end{macrocode} % \end{macro} @@ -2252,7 +2252,7 @@ \splitmaxdepth\@maxdepth % \end{macrocode} % We also need to restrict |\boxmaxdepth| so that re-boxing is not -% generating boxes with arbitrary depth. +% generating boxes with arbitrary depth. % \changes{v1.8j}{2015/03/07}{Set \cs{boxmaxdepth}} % \begin{macrocode} \boxmaxdepth\@maxdepth @@ -2287,7 +2287,7 @@ % reestablished. However, in theory there is a possibility to sneak % in a whole multicols environment into the running header % definition. If that happens then it will also be affected by this -% change---too bad I think. +% change---too bad I think. % \changes{v1.8a}{2011/12/20}{Support for \cs{enlargethispage}} % \changes{v1.8v}{2018/12/27}{Removed dead code, the case where this % can go wrong is too obscure to worry about it (gh/101)} @@ -2446,7 +2446,7 @@ % % Within the OR |\boxmaxdepth| needs to be unrestricted so we set it back % now as it was changed above. -% \changes{v1.8p}{2016/04/07}{Reset \cs{boxmaxdepth}} +% \changes{v1.8p}{2016/04/07}{Reset \cs{boxmaxdepth}} % \begin{macrocode} \boxmaxdepth\maxdimen \setbox\@cclv\vbox{\unvbox\partial@page @@ -2480,7 +2480,7 @@ % Now we reset |\@colroom| to |\@colht| which is \LaTeX's % saved value of |\textheight|. % We also have to reset the recorded position of the last -% |\marginpar| as well as the recorded size of in-text floats +% |\marginpar| as well as the recorded size of in-text floats % as we are now on a new page. % \changes{v1.8d}{2014/04/23}{Reset \cs{@mparbottom} after page finishes} % \changes{v1.8n}{2015/08/19}{Reset \cs{@textfloatsheight} after page finishes} @@ -2617,7 +2617,7 @@ \ifnum\outputpenalty = -\@Mvi \mult@info\@ne{End penalty of multicols seen}% % \end{macrocode} -% If we are at this point then have have to run the balancing code +% If we are at this point then we have to run the balancing code % (which was previously its own output routine). First we pretend % that we had a normal forced breakpoint and then call % |\balance@column@out|. The latter may be let to |\multi@column@out| @@ -3006,7 +3006,7 @@ \vbadness\@M % \end{macrocode} % We also allow for overfull boxes while we trying to split the -% columns. They can easily happen if we have objects with unusual depth. +% columns. They can easily happen if we have objects with unusual depth. % \changes{v1.8h}{2014/09/12}{Do not report overfull} % \begin{macrocode} \vfuzz \maxdimen @@ -3258,7 +3258,7 @@ % If we have unprocessed forced breaks we normally reiterate with a % larger column size to fit them in eventually. However, if there % are simply too many of them (e.g., 3 forced breaks but only 2 -% columns to balance) then this will never succeed and and we would +% columns to balance) then this will never succeed and we would % continue growing the columns until we hit the largest possible % column size. So in addition we check how big the column size is % compared to available room and if we exceed this by @@ -3315,7 +3315,7 @@ %</badness> \advance\dimen@\p@ \repeat -% \end{macrocode} +% \end{macrocode} % If we come out of the loop with the switch |forcedbreak@leftover| % set to true then balancing has failed and we should cut a normal % page. We indicate this below with |\too@badtrue| when any of the @@ -3455,7 +3455,7 @@ % The new release now uses private box registers. % % There was in fact a bug in the new implementation because at one -% point \LaTeX{} started to use the the extended registers and so +% point \LaTeX{} started to use the extended registers and so % jumped from below 255 to above omitting the boxes allocated for % inserts and the output page box. % @@ -3470,7 +3470,7 @@ \count14=\@cclv \fi % \end{macrocode} -% +% % \begin{macrocode} \newbox\mult@rightbox \newbox\mult@grightbox @@ -3785,7 +3785,7 @@ % % Special care is needed with handling |\vspace*| as that % corresponds to |\penalty10000|, |\vskip <skip>|, followed by -% |\vskip 0pt|. If we see this sequence going backwards in the the +% |\vskip 0pt|. If we see this sequence going backwards in the % vertical list we assume that this is a ``desired'' space. We % therefore stop the recursion and reinsert the spaces. % @@ -3832,7 +3832,7 @@ % recurse. % \begin{macrocode} \vskip\@tempb\vskip\@tempa\relax - \else + \else \remove@discardable@items \fi \fi @@ -3852,7 +3852,7 @@ \def\too@badtrue{\global\let\iftoo@bad\iftrue} \def\too@badfalse{\global\let\iftoo@bad\iffalse} % \end{macrocode} -% +% % \changes{v1.8k}{2015/03/21}{The new switch} % \begin{macrocode} \newif\ifforcedbreak@leftover @@ -3996,7 +3996,7 @@ % When ending the environment we simply end the inner % \texttt{multicols} environment, except that we better also stick % in some stretchable vertical glue so that the last column still -% containing text is not vertically stretched out. +% containing text is not vertically stretched out. % % We do this as follows: first we ensure that we are back in vertical mode % and then we cancel out |\lastskip| if it was @@ -4026,7 +4026,7 @@ \par \ifdim\lastskip>\z@ \vskip-\lastskip \fi \ifdim \prevdepth>\z@ - \vskip-\ifdim\prevdepth>\boxmaxdepth + \vskip-\ifdim\prevdepth>\boxmaxdepth \boxmaxdepth \else \prevdepth \fi \fi @@ -4343,9 +4343,9 @@ % \begin{macrocode} \newcommand\@docolaction[4][1]{% % \end{macrocode} -% -% How does the column number get associated with our label? We -% do do this by writing another line into the aux file. Here are the +% +% How does the column number get associated with our label? We +% do this by writing another line into the aux file. Here are the % preparations. % \begin{macrocode} \edef\@docolactioncheck{\write\@auxout @@ -4394,7 +4394,7 @@ % \begin{macrocode} \newif\if@docolactionstar % \end{macrocode} -% +% % Because of extra data writing to the aux file the aux file will % now contain something like the following after the document is % processed the first time: @@ -4480,5 +4480,3 @@ % \Finale % \endinput - - diff --git a/Master/texmf-dist/source/latex-dev/tools/multicol.ins b/Master/texmf-dist/source/latex-dev/tools/multicol.ins index 9fd6cbe6e9f..f872b83cdee 100644 --- a/Master/texmf-dist/source/latex-dev/tools/multicol.ins +++ b/Master/texmf-dist/source/latex-dev/tools/multicol.ins @@ -3,31 +3,31 @@ %% driver files from the doc files in this package when run through %% LaTeX or TeX. %% -%% Copyright (C) 1993-2019 +%% Copyright (C) 1993-2020 %% The LaTeX3 Project and any individual authors listed elsewhere -%% in this file. -%% +%% in this file. +%% %% This file is part of the Standard LaTeX `Tools Bundle'. %% ------------------------------------------------------- -%% +%% %% It may be distributed and/or modified under the %% conditions of the LaTeX Project Public License, either version 1.3c %% of this license or (at your option) any later version. %% The latest version of this license is in %% https://www.latex-project.org/lppl.txt -%% and version 1.3c or later is part of all distributions of LaTeX +%% and version 1.3c or later is part of all distributions of LaTeX %% version 2005/12/01 or later. -%% +%% %% As this file contains legal notices, it is NOT PERMITTED to modify %% this file in any way that the legal information placed into %% generated files is changed (i.e., the files generated when the %% original file is executed). This restriction does not apply if %% (parts of) the content is reused in a different WORK producing its %% own generated files. -%% +%% %% The list of all files belonging to the `Tools Bundle' is %% given in the file `manifest.txt'. -%% +%% %% %% --------------- start of docstrip commands ------------------ %% @@ -45,9 +45,9 @@ The source is maintained by the LaTeX Project team and bug reports for it can be opened at https://latex-project.org/bugs/ (but please observe conditions on bug reports sent to that address!) -Copyright (C) 1993-2019 +Copyright (C) 1993-2020 The LaTeX3 Project and any individual authors listed elsewhere -in this file. +in this file. This file was generated from file(s) of the Standard LaTeX `Tools Bundle'. -------------------------------------------------------------------------- @@ -57,7 +57,7 @@ conditions of the LaTeX Project Public License, either version 1.3c of this license or (at your option) any later version. The latest version of this license is in https://www.latex-project.org/lppl.txt -and version 1.3c or later is part of all distributions of LaTeX +and version 1.3c or later is part of all distributions of LaTeX version 2005/12/01 or later. This file may only be distributed together with a copy of the LaTeX diff --git a/Master/texmf-dist/source/latex-dev/tools/rawfonts.dtx b/Master/texmf-dist/source/latex-dev/tools/rawfonts.dtx index 0fd7dd5006e..9c5daa57a50 100644 --- a/Master/texmf-dist/source/latex-dev/tools/rawfonts.dtx +++ b/Master/texmf-dist/source/latex-dev/tools/rawfonts.dtx @@ -1,6 +1,6 @@ % \iffalse meta-comment % -% Copyright (C) 1993-2019 +% Copyright (C) 1993-2020 % % The LaTeX3 Project and any individual authors listed elsewhere % in this file. diff --git a/Master/texmf-dist/source/latex-dev/tools/shellesc.dtx b/Master/texmf-dist/source/latex-dev/tools/shellesc.dtx index 9706c5aa032..3b96c3e9ee3 100644 --- a/Master/texmf-dist/source/latex-dev/tools/shellesc.dtx +++ b/Master/texmf-dist/source/latex-dev/tools/shellesc.dtx @@ -1,6 +1,6 @@ % \iffalse %% Source File: shellesc.dtx -%% Copyright (C) 2015-2019 +%% Copyright (C) 2015-2020 %% %% The LaTeX3 Project and any individual authors listed elsewhere %% in this file. @@ -49,7 +49,7 @@ % \changes{v0.2a}{2016/06/07}{Improve use with plain TeX} % \section{Introduction} % -% +% % For many years web2c based \TeX\ implementations have used the syntax % of the \verb|\write| command to access system commands by using a % special stream 18 (streams above 15 can not be allocated to files in @@ -96,7 +96,7 @@ % non-immediate \verb|\write18| in a document being ported to current % Lua\TeX, you will need to change to use the % \verb|\DelayedShellEscape| command. -% +% % \section{Implementation} % % \begin{macrocode} @@ -153,7 +153,7 @@ % % \begin{macro}{\ShellEscape} % \changes{v1.0a}{2019/10/13}{Lua logging for gh/195} -% Execute the supplied tokens as a system dependent command, assuming +% Execute the supplied tokens as a system dependent command, assuming % such execution is allowed. % \begin{macrocode} \ifx\lastsavedimageresourcepages\@undefined @@ -171,7 +171,7 @@ % \changes{v0.1c}{2016/04/29}{Define \cs{DelayedShellEscape} not \cs{ShellEscape}(UF)} % \changes{v1.0a}{2019/10/13}{Lua logging for gh/195} % Execute the supplied tokens as a system dependent command, when this -% node is shipped out with the completed page, assuming +% node is shipped out with the completed page, assuming % such execution is allowed. % \begin{macrocode} \ifx\lastsavedimageresourcepages\@undefined diff --git a/Master/texmf-dist/source/latex-dev/tools/showkeys.dtx b/Master/texmf-dist/source/latex-dev/tools/showkeys.dtx index 6e2516856d5..59eb699ae81 100644 --- a/Master/texmf-dist/source/latex-dev/tools/showkeys.dtx +++ b/Master/texmf-dist/source/latex-dev/tools/showkeys.dtx @@ -1,6 +1,6 @@ % \iffalse meta-comment % -% Copyright (C) 1993-2019 +% Copyright (C) 1993-2020 % % The LaTeX3 Project and any individual authors listed elsewhere % in this file. diff --git a/Master/texmf-dist/source/latex-dev/tools/somedefs.dtx b/Master/texmf-dist/source/latex-dev/tools/somedefs.dtx index f73a45b7871..120ad980781 100644 --- a/Master/texmf-dist/source/latex-dev/tools/somedefs.dtx +++ b/Master/texmf-dist/source/latex-dev/tools/somedefs.dtx @@ -1,6 +1,6 @@ % \iffalse meta-comment % -% Copyright (C) 1993-2019 +% Copyright (C) 1993-2020 % % The LaTeX3 Project and any individual authors listed elsewhere % in this file. diff --git a/Master/texmf-dist/source/latex-dev/tools/tabularx.dtx b/Master/texmf-dist/source/latex-dev/tools/tabularx.dtx index ff8f3cec9a5..577730e665b 100644 --- a/Master/texmf-dist/source/latex-dev/tools/tabularx.dtx +++ b/Master/texmf-dist/source/latex-dev/tools/tabularx.dtx @@ -1,6 +1,6 @@ % \iffalse meta-comment % -% Copyright (C) 1993-2019 +% Copyright (C) 1993-2020 % % The LaTeX3 Project and any individual authors listed elsewhere % in this file. @@ -31,7 +31,7 @@ %<driver> \ProvidesFile{tabularx.drv} % \fi % \ProvidesFile{tabularx.dtx} - [2016/02/03 v2.11b `tabularx' package (DPC)] + [2020/01/15 v2.11c `tabularx' package (DPC)] % \iffalse %<*driver> \documentclass{ltxdoc} @@ -231,7 +231,7 @@ % Normally all {\ttfamily X} columns in a single table are set to the % same width, however it is possible to make {\ttfamily tabularx} set % them to different widths. -% A preamble argument of +% A preamble argument of % "{>{\hsize=.5\hsize\linewidth=\hsize}X"\\ % " >{\hsize=1.5\hsize\linewidth=\hsize}X}"\\ % specifies two columns, the second will be three times as wide as the @@ -341,8 +341,9 @@ % \end{macrocode} % \changes{v2.02}{1995/03/20} % {New local setting of \cs{TX@}} -% \changes{v4.09}{1998/05/13} +% \changes{v2.09}{1998/05/13} % {Use \cs{setlength}, so that calc extensions apply. tools/2793} +% \changes{v2.11c}{2020/01/15}{Delete duplicated . at end of message} % Allow "\tabularx" "\endtabularx" (but not "\begin{tabularx}" % "\end{tabularx}") to be used in "\newenvironment" definitions. % \begin{macrocode} @@ -351,11 +352,11 @@ % \end{macrocode} % "\relax" added at v1.05 so that non-expandable length tokens, like % "\textwidth" do not generate an extra space, and an overfull box. -% "\relax" removed again at v4.09 in favour of "\setlength" so if you +% "\relax" removed again at v2.09 in favour of "\setlength" so if you % use the calc package you can use a width of "(\textwidth-12pt)/2". % \begin{macrocode} \setlength\TX@target{#1}% - \TX@typeout{Target width: #1 = \the\TX@target.}% + \TX@typeout{Target width: #1 = \the\TX@target}% \toks@{}\TX@get@body} % \end{macrocode} % \end{macro} @@ -883,7 +884,7 @@ % % Originally I followed Knuth, and had "\def\@tempa{##1}", however this % did not allow "#" to appear in the argument. So in v1.04, I changed -% this to to use a token register, and "\edef". This allows "#" appear, +% this to use a token register, and "\edef". This allows "#" appear, % but makes each one appear twice!, so later we loop through, replacing % "##" by "#". % \begin{macrocode} diff --git a/Master/texmf-dist/source/latex-dev/tools/tabularx.ins b/Master/texmf-dist/source/latex-dev/tools/tabularx.ins index 06308d77359..05effd3342e 100644 --- a/Master/texmf-dist/source/latex-dev/tools/tabularx.ins +++ b/Master/texmf-dist/source/latex-dev/tools/tabularx.ins @@ -3,31 +3,31 @@ %% driver files from the doc files in this package when run through %% LaTeX or TeX. %% -%% Copyright (C) 1993-2019 +%% Copyright (C) 1993-2020 %% The LaTeX3 Project and any individual authors listed elsewhere -%% in this file. -%% +%% in this file. +%% %% This file is part of the Standard LaTeX `Tools Bundle'. %% ------------------------------------------------------- -%% +%% %% It may be distributed and/or modified under the %% conditions of the LaTeX Project Public License, either version 1.3c %% of this license or (at your option) any later version. %% The latest version of this license is in %% https://www.latex-project.org/lppl.txt -%% and version 1.3c or later is part of all distributions of LaTeX +%% and version 1.3c or later is part of all distributions of LaTeX %% version 2005/12/01 or later. -%% +%% %% As this file contains legal notices, it is NOT PERMITTED to modify %% this file in any way that the legal information placed into %% generated files is changed (i.e., the files generated when the %% original file is executed). This restriction does not apply if %% (parts of) the content is reused in a different WORK producing its %% own generated files. -%% +%% %% The list of all files belonging to the `Tools Bundle' is %% given in the file `manifest.txt'. -%% +%% %% %% --------------- start of docstrip commands ------------------ %% @@ -45,9 +45,9 @@ The source is maintained by the LaTeX Project team and bug reports for it can be opened at https://latex-project.org/bugs/ (but please observe conditions on bug reports sent to that address!) -Copyright (C) 1993-2019 +Copyright (C) 1993-2020 The LaTeX3 Project and any individual authors listed elsewhere -in this file. +in this file. This file was generated from file(s) of the Standard LaTeX `Tools Bundle'. -------------------------------------------------------------------------- @@ -57,7 +57,7 @@ conditions of the LaTeX Project Public License, either version 1.3c of this license or (at your option) any later version. The latest version of this license is in https://www.latex-project.org/lppl.txt -and version 1.3c or later is part of all distributions of LaTeX +and version 1.3c or later is part of all distributions of LaTeX version 2005/12/01 or later. This file may only be distributed together with a copy of the LaTeX diff --git a/Master/texmf-dist/source/latex-dev/tools/theorem.dtx b/Master/texmf-dist/source/latex-dev/tools/theorem.dtx index 6f745d016ef..0df7dbb7649 100644 --- a/Master/texmf-dist/source/latex-dev/tools/theorem.dtx +++ b/Master/texmf-dist/source/latex-dev/tools/theorem.dtx @@ -1,6 +1,6 @@ % \iffalse meta-comment % -% Copyright (C) 1993-2019 +% Copyright (C) 1993-2020 % % The LaTeX3 Project and any individual authors listed elsewhere % in this file. diff --git a/Master/texmf-dist/source/latex-dev/tools/tools.ins b/Master/texmf-dist/source/latex-dev/tools/tools.ins index 12625e81662..5e978712215 100644 --- a/Master/texmf-dist/source/latex-dev/tools/tools.ins +++ b/Master/texmf-dist/source/latex-dev/tools/tools.ins @@ -3,31 +3,31 @@ %% driver files from the doc files in this package when run through %% LaTeX or TeX. %% -%% Copyright (C) 1993-2019 +%% Copyright (C) 1993-2020 %% The LaTeX3 Project and any individual authors listed elsewhere -%% in this file. -%% +%% in this file. +%% %% This file is part of the Standard LaTeX `Tools Bundle'. %% ------------------------------------------------------- -%% +%% %% It may be distributed and/or modified under the %% conditions of the LaTeX Project Public License, either version 1.3c %% of this license or (at your option) any later version. %% The latest version of this license is in %% https://www.latex-project.org/lppl.txt -%% and version 1.3c or later is part of all distributions of LaTeX +%% and version 1.3c or later is part of all distributions of LaTeX %% version 2005/12/01 or later. -%% +%% %% As this file contains legal notices, it is NOT PERMITTED to modify %% this file in any way that the legal information placed into %% generated files is changed (i.e., the files generated when the %% original file is executed). This restriction does not apply if %% (parts of) the content is reused in a different WORK producing its %% own generated files. -%% +%% %% The list of all files belonging to the `Tools Bundle' is %% given in the file `manifest.txt'. -%% +%% %% %% --------------- start of docstrip commands ------------------ %% @@ -49,9 +49,9 @@ reports for it can be opened at https://latex-project.org/bugs/ (but please observe conditions on bug reports sent to that address!) -Copyright (C) 1993-2019 +Copyright (C) 1993-2020 The LaTeX3 Project and any individual authors listed elsewhere -in this file. +in this file. This file was generated from file(s) of the Standard LaTeX `Tools Bundle'. -------------------------------------------------------------------------- @@ -61,7 +61,7 @@ conditions of the LaTeX Project Public License, either version 1.3c of this license or (at your option) any later version. The latest version of this license is in https://www.latex-project.org/lppl.txt -and version 1.3c or later is part of all distributions of LaTeX +and version 1.3c or later is part of all distributions of LaTeX version 2005/12/01 or later. This file may only be distributed together with a copy of the LaTeX @@ -166,7 +166,7 @@ given in the file `manifest.txt'. \SimplePackage{layout} -% Infix Arithmetic +% Infix Arithmetic %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% \SimplePackage{calc} diff --git a/Master/texmf-dist/source/latex-dev/tools/trace.dtx b/Master/texmf-dist/source/latex-dev/tools/trace.dtx index e808fdd4317..4a08f569bb5 100644 --- a/Master/texmf-dist/source/latex-dev/tools/trace.dtx +++ b/Master/texmf-dist/source/latex-dev/tools/trace.dtx @@ -1,6 +1,6 @@ % \iffalse meta-comment % -% Copyright (C) 1993-2019 +% Copyright (C) 1993-2020 % % The LaTeX3 Project and any individual authors listed elsewhere % in this file. @@ -493,7 +493,7 @@ % turns on tracing of assignments and tracing of % grouping.\footnote{These are my personal preference settings; % \eTeX{} does in fact offer some more tracing switches and perhaps -% one or or more of them should be added here as well.} +% one or more of them should be added here as well.} % To keep tracing at a minimum |\tracingassigns| should be turned % on last (in fact like before we disassemble |\tracingall| % and reorder it partially). @@ -508,7 +508,7 @@ % \end{macrocode} % We only change |\tracingoutput| if it hasn't already been enabled by % |\showoutput|. If that's not the case, we set it to 2 so that we -% can distingush the two cases. +% can distingush the two cases. % \changes{v1.1e}{2018/10/13}{Only reset \cs{tracingoutput} if not % set by \cs{showoutput} earlier} % \begin{macrocode} @@ -519,7 +519,7 @@ \showboxdepth\maxdimen \fi % \end{macrocode} -% +% % \begin{macrocode} \errorstopmode \tracingmacros\tw@ @@ -563,7 +563,7 @@ \showboxdepth\m@ne \fi % \end{macrocode} -% +% % \begin{macrocode} \tracingstats\@ne \tracingparagraphs\z@ diff --git a/Master/texmf-dist/source/latex-dev/tools/varioref.dtx b/Master/texmf-dist/source/latex-dev/tools/varioref.dtx index b8392c76f27..077103eb97a 100644 --- a/Master/texmf-dist/source/latex-dev/tools/varioref.dtx +++ b/Master/texmf-dist/source/latex-dev/tools/varioref.dtx @@ -1,6 +1,6 @@ % \iffalse meta-comment % -% Copyright (C) 1993-2019 +% Copyright (C) 1993-2020 % % The LaTeX3 Project and any individual authors listed elsewhere % in this file. @@ -22,7 +22,7 @@ % \fi % \iffalse %% Package varioref to use with LaTeX2e -%% Copyright (C) 1992-2019 Frank Mittelbach, all rights reserved. +%% Copyright (C) 1992-2020 Frank Mittelbach, all rights reserved. %% %% For additions or updates to the language options please contact %% the author at @@ -40,7 +40,7 @@ %<package>\DeclareCurrentRelease{}{2019-10-01} %<package> %<package>\ProvidesPackage{varioref} -%<package> [2019/11/05 v1.6c package for extended references (FMi)] +%<package> [2020/01/23 v1.6c package for extended references (FMi)] % \fi % %% @@ -207,7 +207,7 @@ % to achieve the desired effect. % % -% \DescribeMacro\vrefrange +% \DescribeMacro\vrefrange % This command is similar to |\vref| but it % takes two mandatory arguments denoting a range to refer to (e.g., a % sequences of figures or a sequence of equations, etc.). So if @@ -497,7 +497,7 @@ % As mentioned above the package supports all standard options offered % by the Babel system to customize the strings produced, it may also % have a few not supported by babel, for a full list look -% in section\vref{sec:impoptions}. In addition it offers the option +% in section~\vref{sec:impoptions}. In addition it offers the option % \texttt{draft} to turn error messages into warnings during % development. The default \texttt{final} produces error message when % a generated string falls onto a page boundary (see next section). @@ -531,7 +531,7 @@ % \begin{quote} % table 5 on the current \meta{page break} page % \end{quote} -% would would result in an error, which needs to be resolved by the +% would result in an error, which needs to be resolved by the % user by replacing the |\vref| command with an ordinary |\ref| just % before the final run. This is not % completely satisfactory but in such case no solution really is. @@ -731,7 +731,7 @@ % easily, so you will see missing glyphs below. To see the real % letters you have to look at the source or package file. % \changes{v1.6b}{2019/09/08}{Option arabic added} -% \begin{allowtofu} +% \begin{allowtofu} % \begin{macrocode} \DeclareOption{arabic} {\vref@addto\extrasarabic{% @@ -745,7 +745,7 @@ \def\reftextlabelrange#1#2{\ref{#1} حتى~\ref{#2}}% }} % \end{macrocode} -% \end{allowtofu} +% \end{allowtofu} % \changes{v1.2a}{1998/11/27}{Added austrian defaults (identical to german)} % The austrian defaults are the same as the german ones. % \begin{macrocode} @@ -1803,7 +1803,7 @@ % user explicitly requested an empty text string using the optional % argument we cancel any preceding space since in this case we are % otherwise likely to end up with spaces one before and one after -% |\vpageref|. +% |\vpageref|. % \changes{v1.2f}{2000/07/07}{Don't output space if optional argument % empty (pr/3230)} % \begin{macrocode} @@ -1819,7 +1819,7 @@ % a space. % \begin{macrocode} \def\@tempc{#2}% - \ifx\@tempc\@empty \else + \ifx\@tempc\@empty \else #2\vref@space \fi % \end{macrocode} @@ -1972,7 +1972,7 @@ % The \pkg{hyperref} package can then change the meaning of this % command to suppress a hyperlink. % -% It is is also a good way to check if we are running with a new +% It is also a good way to check if we are running with a new % \pkg{varioref} by testing %\begin{verbatim} % \ifdefined\vp@gerefstar @@ -2079,7 +2079,7 @@ % \end{macrocode} % If option \texttt{space} is used then we remove a preceding space % and add our own unbreakable space instead. Otherwise we don't do -% any space-handling. +% any space-handling. % \begin{macrocode} \if@vrefhandlespace \unskip \nobreakspace @@ -2100,7 +2100,7 @@ % After having handled (or not handled) the spacing we call % |\vref@star| to scan the optional arguments and do the rest. % If that command has been altered by \pkg{hyperref} then the -% current one needs altering too and does the argument scanning explicitly. +% current one needs altering too and does the argument scanning explicitly. % \begin{macrocode} \vref@star % in hyperref this needs to be explicit } @@ -2305,7 +2305,7 @@ {\Vr@f}} % \end{macrocode} % \end{macro} -% +% % \begin{macro}{\Vref@star} % \changes{v1.6a}{2019/08/25}{Command added to support hyperref better} % \begin{macrocode} @@ -2314,7 +2314,7 @@ \vpageref[#1]{#2}} % \end{macrocode} % \end{macro} -% +% % \begin{macro}{\Vr@f} % \changes{v1.4a}{2002/02/24}{Macro added} % \changes{v1.4x}{2010/08/04}{Correct spacing -- same mistake as in \cs{vref} @@ -2332,7 +2332,7 @@ % \begin{macro}{\vpagerefcompare} -% +% % \changes{v1.6a}{2019/08/25}{Macro added} % \begin{macrocode} \DeclareRobustCommand\vpagerefcompare[2]{% label1, label2, TRUE, FALSE @@ -2343,7 +2343,7 @@ \else \expandafter\@secondoftwo \fi -} +} % \end{macrocode} % \end{macro} % @@ -2385,7 +2385,7 @@ % True if the two pages have arabic page numbers are at most off by % one so that |\vpageref| would produce a special string. % -% This is n some sense a general version of |\vpagerefnearby| for +% This is in some sense a general version of |\vpagerefnearby| for % use in more complex situations. I.e., if you try to determine if % a larger set of references would be close to the current page and % you use each time |\vpagerefnearby| then you generate a lot of @@ -2449,4 +2449,3 @@ % \Finale % \endinput - diff --git a/Master/texmf-dist/source/latex-dev/tools/varioref.ins b/Master/texmf-dist/source/latex-dev/tools/varioref.ins index e436202e4d0..951eedad891 100644 --- a/Master/texmf-dist/source/latex-dev/tools/varioref.ins +++ b/Master/texmf-dist/source/latex-dev/tools/varioref.ins @@ -3,31 +3,31 @@ %% driver files from the doc files in this package when run through %% LaTeX or TeX. %% -%% Copyright (C) 1993-2019 +%% Copyright (C) 1993-2020 %% The LaTeX3 Project and any individual authors listed elsewhere -%% in this file. -%% +%% in this file. +%% %% This file is part of the Standard LaTeX `Tools Bundle'. %% ------------------------------------------------------- -%% +%% %% It may be distributed and/or modified under the %% conditions of the LaTeX Project Public License, either version 1.3c %% of this license or (at your option) any later version. %% The latest version of this license is in %% https://www.latex-project.org/lppl.txt -%% and version 1.3c or later is part of all distributions of LaTeX +%% and version 1.3c or later is part of all distributions of LaTeX %% version 2008 or later. -%% +%% %% As this file contains legal notices, it is NOT PERMITTED to modify %% this file in any way that the legal information placed into %% generated files is changed (i.e., the files generated when the %% original file is executed). This restriction does not apply if %% (parts of) the content is reused in a different WORK producing its %% own generated files. -%% +%% %% The list of all files belonging to the `Tools Bundle' is %% given in the file `manifest.txt'. -%% +%% %% %% --------------- start of docstrip commands ------------------ %% @@ -45,9 +45,9 @@ The source is maintained by the LaTeX Project team and bug reports for it can be opened at https://latex-project.org/bugs/ (but please observe conditions on bug reports sent to that address!) -Copyright (C) 1993-2019 +Copyright (C) 1993-2020 The LaTeX3 Project and any individual authors listed elsewhere -in this file. +in this file. This file was generated from file(s) of the Standard LaTeX `Tools Bundle'. -------------------------------------------------------------------------- @@ -57,7 +57,7 @@ conditions of the LaTeX Project Public License, either version 1.3c of this license or (at your option) any later version. The latest version of this license is in https://www.latex-project.org/lppl.txt -and version 1.3c or later is part of all distributions of LaTeX +and version 1.3c or later is part of all distributions of LaTeX version 2005/12/01 or later. This file may only be distributed together with a copy of the LaTeX diff --git a/Master/texmf-dist/source/latex-dev/tools/verbatim.dtx b/Master/texmf-dist/source/latex-dev/tools/verbatim.dtx index b89bab7759e..121e2d4b39c 100644 --- a/Master/texmf-dist/source/latex-dev/tools/verbatim.dtx +++ b/Master/texmf-dist/source/latex-dev/tools/verbatim.dtx @@ -1,6 +1,6 @@ % \iffalse meta-comment % -% Copyright (C) 1993-2019 +% Copyright (C) 1993-2020 % % The LaTeX3 Project and any individual authors listed elsewhere % in this file. @@ -14,7 +14,7 @@ % The latest version of this license is in % https://www.latex-project.org/lppl.txt % and version 1.3c or later is part of all distributions of LaTeX -% version 2005/12/01 or later. +% version 2008 or later. % % The list of all files belonging to the LaTeX `Tools Bundle' is % given in the file `manifest.txt'. @@ -828,7 +828,7 @@ % \begin{macrocode} \@namedef{verbatim*}{\begingroup\@verbatim % \end{macrocode} -% +% % \changes{v1.5r}{2019/11/10}{Support kernel \cs{verbvisiblespace} (gh/212)} % \begin{macrocode} \@setupverbvisiblespace\@vobeyspaces @@ -1488,7 +1488,7 @@ \else % \end{macrocode} % At this point we pass the name of the file to |\@addtofilelist| -% so that its appears appears in the output of a |\listfiles| +% so that its appears in the output of a |\listfiles| % command. % \changes{v1.5j}{1996/09/25}{Add \cs{@addtofilelist} and % \cs{ProvidesFile} so that the name of the file diff --git a/Master/texmf-dist/source/latex-dev/tools/xr.dtx b/Master/texmf-dist/source/latex-dev/tools/xr.dtx index 97c4c68084e..a6b2ffd8193 100644 --- a/Master/texmf-dist/source/latex-dev/tools/xr.dtx +++ b/Master/texmf-dist/source/latex-dev/tools/xr.dtx @@ -1,6 +1,6 @@ % \iffalse meta-comment % -% Copyright (C) 1993-2019 +% Copyright (C) 1993-2020 % % The LaTeX3 Project and any individual authors listed elsewhere % in this file. @@ -86,7 +86,7 @@ % % As first suggested in Enrico Gregorio's |xcite| package, the current version % also allows |\cite| to reference |\bibitem| in the external document. -% For compatibility with |xcite|, |\externalcitedocument| is made available +% For compatibility with |xcite|, |\externalcitedocument| is made available % as an alias for |\externaldocument| % % \StopEventually{} @@ -183,4 +183,3 @@ % % \Finale % - diff --git a/Master/texmf-dist/source/latex-dev/tools/xspace.dtx b/Master/texmf-dist/source/latex-dev/tools/xspace.dtx index 0745caf5071..ebe8d0f9478 100644 --- a/Master/texmf-dist/source/latex-dev/tools/xspace.dtx +++ b/Master/texmf-dist/source/latex-dev/tools/xspace.dtx @@ -1,6 +1,6 @@ % \iffalse meta-comment % -% Copyright (C) 1993-2019 +% Copyright (C) 1993-2020 % % The LaTeX3 Project and any individual authors listed elsewhere % in this file. |