summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/fonts/source/public/lamstex/lams5.mf
diff options
context:
space:
mode:
Diffstat (limited to 'Master/texmf-dist/fonts/source/public/lamstex/lams5.mf')
-rw-r--r--Master/texmf-dist/fonts/source/public/lamstex/lams5.mf533
1 files changed, 0 insertions, 533 deletions
diff --git a/Master/texmf-dist/fonts/source/public/lamstex/lams5.mf b/Master/texmf-dist/fonts/source/public/lamstex/lams5.mf
deleted file mode 100644
index 02f3eec76b9..00000000000
--- a/Master/texmf-dist/fonts/source/public/lamstex/lams5.mf
+++ /dev/null
@@ -1,533 +0,0 @@
-% LAMS5.MF VERSION 1.0
-% COPYRIGHT (C) 1989 BY THE TEXPLORATORS CORPORATION
-% ALL RIGHTS RESERVED
-
-if unknown cmbase: input cmbase fi
-% replace the macro adjust_fit by version used in earlier cmbase files to
-% avoid division by zero error caused by newer versions of cmbase
-% Patch by Ingo Hadan (Jan 97)
-
-def normal_adjust_fit(expr left_adjustment,right_adjustment) =
- l:=-hround(left_adjustment*hppp)-letter_fit;
- interim xoffset:=-l;
- charwd:=charwd+2letter_fit#+left_adjustment+right_adjustment;
- r:=l+hround(charwd*hppp)-shrink_fit;
- w:=r-hround(right_adjustment*hppp)-letter_fit;
- enddef;
-
-def mono_adjust_fit(expr left_adjustment,right_adjustment) =
- numeric expansion_factor;
- mono_charwd#=2letter_fit#
- +expansion_factor*(charwd+left_adjustment+right_adjustment);
- forsuffixes $=u,jut,cap_jut,beak_jut,apex_corr:
- $:=$.#*expansion_factor*hppp; endfor
- l:=-hround(left_adjustment*expansion_factor*hppp)-letter_fit;
- interim xoffset:=-l;
- r:=l+mono_charwd-shrink_fit;
- w:=r-hround(right_adjustment*expansion_factor*hppp)-letter_fit;
- charwd:=mono_charwd#; charic:=mono_charic#;
- enddef;
-
-font_identifier:="LAMS"; font_size 10pt#;
-
-u#:=20/36pt#; % unit width
-width_adj#:=0pt#; % width adjustment for certain characters
-serif_fit#:=0pt#; % extra sidebar near lowercase serifs
-cap_serif_fit#:=5/36pt#; % extra sidebar near uppercase serifs
-letter_fit#:=0pt#; % extra space added to all sidebars
-
-body_height#:=270/36pt#; % height of tallest characters
-asc_height#:=360/36pt#; % height of lowercase ascenders
-cap_height#:=246/36pt#; % height of caps
-fig_height#:=232/36pt#; % height of numerals
-x_height#:=155/36pt#; % height of lowercase without ascenders
-math_axis#:=90/36pt#; % axis of symmetry for math symbols
-bar_height#:=87/36pt#; % height of crossbar in lowercase e
-comma_depth#:=70/36pt#; % depth of comma below baseline
-desc_depth#:=0/36pt#; % depth of lowercase descenders
-
-crisp#:=8/36pt#; % diameter of serif corners
-tiny#:=8/36pt#; % diameter of rounded corners
-fine#:=7/36pt#; % diameter of sharply rounded corners
-thin_join#:=7/36pt#; % width of extrafine details
-hair#:=9/36pt#; % lowercase hairline breadth
-stem#:=24/36pt#; % lowercase stem breadth
-curve#:=29/36pt#; % lowercase curve breadth
-ess#:=27/36pt#; % breadth in middle of lowercase s
-flare#:=32/36pt#; % diameter of bulbs or breadth of terminals
-dot_size#:=38/36pt#; % diameter of dots
-cap_hair#:=11/36pt#; % uppercase hairline breadth
-cap_stem#:=30/36pt#; % uppercase stem breadth
-cap_curve#:=35/36pt#; % uppercase curve breadth
-cap_ess#:=33/36pt#; % breadth in middle of uppercase s
-rule_thickness#:=.4pt#; % thickness of lines in math symbols
-
-dish#:=1/36pt#; % amount erased at top or bottom of serifs
-bracket#:=20/36pt#; % vertical distance from serif base to tangent
-jut#:=30/36pt#; % protrusion of lowercase serifs
-cap_jut#:=37/36pt#; % protrusion of uppercase serifs
-beak_jut#:=10/36pt#; % horizontal protrusion of beak serifs
-beak#:=70/36pt#; % vertical protrusion of beak serifs
-vair#:=8/36pt#; % vertical diameter of hairlines
-notch_cut#:=10pt#; % maximum breadth above or below notches
-bar#:=11/36pt#; % lowercase bar thickness
-slab#:=11/36pt#; % serif and arm thickness
-cap_bar#:=11/36pt#; % uppercase bar thickness
-cap_band#:=11/36pt#; % uppercase thickness above/below lobes
-cap_notch_cut#:=10pt#; % max breadth above/below uppercase notches
-serif_drop#:=4/36pt#; % vertical drop of sloped serifs
-stem_corr#:=1/36pt#; % for small refinements of stem breadth
-vair_corr#:=1/36pt#; % for small refinements of hairline height
-apex_corr#:=0pt#; % extra width at diagonal junctions
-
-o#:=8/36pt#; % amount of overshoot for curves
-apex_o#:=8/36pt#; % amount of overshoot for diagonal junctions
-
-slant:=0; % tilt ratio $(\Delta x/\Delta y)$
-fudge:=1; % factor applied to weights of heavy characters
-math_spread:=0; % extra openness of math symbols
-superness:=1/sqrt2; % parameter for superellipses
-superpull:=1/6; % extra openness inside bowls
-beak_darkness:=11/30; % fraction of triangle inside beak serifs
-ligs:=2; % level of ligatures to be included
-
-square_dots:=false; % should dots be square?
-hefty:=false; % should we try hard not to be overweight?
-serifs:=true; % should serifs and bulbs be attached?
-monospace:=false; % should all characters have the same width?
-variant_g:=true; % should an italic-style g be used?
-low_asterisk:=false; % should the asterisk be centered at the axis?
-math_fitting:=true; % should math-mode spacing be used?
-
-mode_setup; font_setup;
-autorounding:=0;
-
-font_slant slant; font_x_height 0;
-font_quad 18u# if not monospace:+4letter_fit# fi;
-
-slant:=mono_charic#:=0; % the remaining characters will not be slanted
-currenttransform:=identity yscaled aspect_ratio scaled granularity;
-
-
-def RevShaft (expr ChCode,ChWidthFrac,ChDepthFrac)=
-
-beginchar(ChCode,ChWidthFrac*18u#,0,ChDepthFrac*18u#);
-adjust_fit(0,0); pickup crisp.nib;
-x1= 0; x0=(w);
-y1=h; y0=-d;
-pickup pencircle scaled rule_thickness;
-draw z1--z0;
-penlabels(1,2); endchar;
-enddef;
-
-
-def RevDashedShaft (expr ChCode, ChWidthFrac, ChDepthFrac)=
-
-beginchar(ChCode,ChWidthFrac*18u#,0,ChDepthFrac*18u#);
-adjust_fit(0,0); pickup crisp.nib;
-x1= 0; x0=(w);
-y1=h; y0=-d;
-numeric theta,delta; theta=angle(z0-z1); delta=3u++.24asc_height;
-if abs(theta-45)<2.5: theta:=45; y1:=y0+x1-x0; fi % near-45$^\circ$ angle
-pos1(rule_thickness,90+theta); pos2(1.5rule_thickness,90+theta);
-x2= w;
-y2=-d;
-pickup pencircle scaled rule_thickness;
-draw z1--1/6[z1,z2];
-draw 2/6[z1,z2]--4/6[z1,z2];
-draw 5/6[z1,z2]--z2;
-penlabels(1,2); endchar;
-enddef;
-
-
-def RevUpperHead (expr ChCode, ChWidthFrac, ChDepthFrac)=
-
-beginchar(ChCode,ChWidthFrac*18u#,0,ChDepthFrac*18u#);
-adjust_fit(0,0); pickup crisp.nib;
-x1=0; x0=w;
-y1=h; y0=-d;
-numeric theta; theta=angle(z0-z1);
-numeric delta; delta=((3u++.24asc_height)+eps-rule_thickness-.5crisp.breadth);
-pos1(rule_thickness,90+theta);
-pos2(1.5rule_thickness,theta);
-pos3(bar,theta); pos4(bar,theta);
-z4=z0+ dir -(90+(45-theta)) scaled delta;
-z3=z0+ dir -(180+(45-theta)) scaled delta;
-z2l=z0;
-z9=.381966[.5[z3,z4],z0];
-pickup crisp.nib;
-filldraw z2r..{z3-z9}z3r---{z9-z3}z3l..z2l--cycle;
-filldraw z2r..{z4-z9}z4r---{z9-z4}z4l..z2l--cycle;
-endchar;
-enddef;
-
-
-def RevLowerHead (expr ChCode, ChWidthFrac, ChDepthFrac)=
-
-beginchar(ChCode,ChWidthFrac*18u#,0,ChDepthFrac*18u#);
-adjust_fit(0,0); pickup crisp.nib;
-x1=w ; x0= 0;
-y1=-d; y0=h;
-numeric theta; theta=angle(z1-z0);
-numeric delta; delta=((3u++.24asc_height)+eps-rule_thickness-.5crisp.breadth);
-pos1(rule_thickness,-90+theta);
-pos2(1.5rule_thickness,theta);
-pos3(bar,theta); pos4(bar,theta);
-z4=z0+ dir (90-(45-theta)) scaled delta;
-z3=z0+ dir -(45-theta) scaled delta;
-pos5(bar,90-(45-theta)); z5l=z0; pos6(bar,-(45-theta)); z6l=z0;
-z2r=z0;
-z9=.381966[.5[z3,z4],z0];
-pickup crisp.nib;
-filldraw z2r..{z3-z9}z3r---{z9-z3}z3l..z2l--cycle;
-filldraw z2r..{z4-z9}z4r---{z9-z4}z4l..z2l--cycle;
-penlabels(0,1,2,3,4,5,6,9); endchar;
-enddef;
-def RevUpperTopBarb (expr ChCode, ChWidthFrac, ChDepthFrac)=
-beginchar(ChCode,ChWidthFrac*18u#,0,ChDepthFrac*18u#);
-adjust_fit(0,0); pickup crisp.nib;
-x1=0; x0=w;
-y1=h; y0=-d;
-numeric theta; theta=angle(z0-z1);
-pos1(rule_thickness,90+theta);
-pos0(rule_thickness,90+theta);
-pos2(1.5rule_thickness,theta);
-pos3(bar,theta); pos4(bar,theta);
-z4=z0+ dir -(90+(45-theta)) scaled ((3u++.24asc_height)+eps-rule_thickness-.5crisp.breadth);
-z3=z0+ dir -(180+(45-theta)) scaled ((3u++.24asc_height)+eps-rule_thickness-.5crisp.breadth);
-z2l=z0;
-z9=.381966[.5[z3,z4],z0];
-pickup crisp.nib;
-filldraw z2r..{z3-z9}z3r---{z9-z3}z3l..z2l--cycle;
-filldraw z2r{dir (270+theta)}..{z1-z0}z0l--z2l--cycle;
-endchar;
-enddef;
-
-
-def RevUpperBotBarb (expr ChCode,ChWidthFrac,ChDepthFrac)=
-beginchar(ChCode,ChWidthFrac*18u#,0,ChDepthFrac*18u#);
-adjust_fit(0,0); pickup crisp.nib;
-x1=0; x0=w;
-y1=h; y0=-d;
-numeric theta; theta=angle(z0-z1);
-pos1(rule_thickness,90+theta);
-pos0(rule_thickness,90+theta);
-pos2(1.5rule_thickness,theta);
-pos3(bar,theta); pos4(bar,theta);
-z4=z0+ dir -(90+(45-theta)) scaled ((3u++.24asc_height)+eps-rule_thickness-.5crisp.breadth);
-z3=z0+ dir -(180+(45-theta)) scaled ((3u++.24asc_height)+eps-rule_thickness-.5crisp.breadth);
-z2l=z0;
-z9=.381966[.5[z3,z4],z0];
-pickup crisp.nib;
-filldraw z2r..{z4-z9}z4r---{z9-z4}z4l..z2l--cycle;
-filldraw z2r{dir (90+theta)}..{z1-z0}z0r--z2l--cycle;
-
-endchar;
-
-enddef;
-
-
-def RevLowerTopBarb (expr ChCode, ChWidthFrac, ChDepthFrac)=
-beginchar(ChCode,ChWidthFrac*18u#,0,ChDepthFrac*18u#);
-adjust_fit(0,0); pickup crisp.nib;
-x1=w ; x0=0;
-y1=-d; y0=h;
-numeric theta; theta=angle(z1-z0);
-pos1(rule_thickness,90+theta);
-pos0(rule_thickness,90+theta);
-pos2(1.5rule_thickness,theta);
-pos3(bar,theta); pos4(bar,theta);
-z4=z0+ dir (90-(45-theta)) scaled ((3u++.24asc_height)+eps-rule_thickness-.5crisp.breadth);
-z3=z0+ dir -(45-theta) scaled ((3u++.24asc_height)+eps-rule_thickness-.5crisp.breadth);
-pos5(bar,90-(45-theta)); z5l=z0; pos6(bar,-(45-theta)); z6l=z0;
-z2r=z0;
-z9=.381966[.5[z3,z4],z0];
-pickup crisp.nib;
-filldraw z2r..{z4-z9}z4r---{z9-z4}z4l..z2l--cycle;
-filldraw z2l{dir (180+90+theta)}..{z1-z0}z0l--z2r--cycle;
-endchar;
-
-enddef;
-
-
-def RevLowerBotBarb (expr ChCode, ChWidthFrac,ChDepthFrac)=
-beginchar(ChCode,ChWidthFrac*18u#,0,ChDepthFrac*18u#);
-adjust_fit(0,0); pickup crisp.nib;
-x1=w ; x0=0;
-y1=-d; y0=h;
-numeric theta,delta;theta=angle(z1-z0);
-pos1(rule_thickness,90+theta);
-pos0(rule_thickness,90+theta);
-pos2(1.5rule_thickness,theta);
-pos3(bar,theta); pos4(bar,theta);
-z4=z0+ dir (90-(45-theta)) scaled ((3u++.24asc_height)+eps-rule_thickness-.5crisp.breadth);
-z3=z0+ dir -(45-theta) scaled ((3u++.24asc_height)+eps-rule_thickness-.5crisp.breadth);
-pos5(bar,90-(45-theta)); z5l=z0; pos6(bar,-(45-theta)); z6l=z0;
-z2r=z0;
-z9=.381966[.5[z3,z4],z0];
-pickup crisp.nib;
-filldraw z2r..{z3-z9}z3r---{z9-z3}z3l..z2l--cycle;
-filldraw z2l{dir (90+theta)}..{z1-z0}z0r--z2r--cycle;
-
-endchar;
-
-enddef;
-
-
-
-def RevLowerTopHook (expr ChCode, ChWidthFrac, ChDepthFrac)=
-compute_spread(.45x_height#,.55x_height);
-beginchar(ChCode,ChWidthFrac*18u#,0,ChDepthFrac*18u#);
-adjust_fit(0,0); pickup crisp.nib;
-x1=(w) ; x0= 0;
-y1=-d; y0=h;
-numeric theta; theta=angle(z1-z0);
-pos1(rule_thickness,-90+theta);
-pos2(1.5rule_thickness,theta);
-pos3(bar,theta); pos4(bar,theta);
-z4=z0+ dir (90+theta) xscaled spread yscaled spread;
-pos5(bar,90-(45-theta)); z5l=z0; pos6(bar,-(45-theta)); z6l=z0;
-z2l=z0;
-z9=.381966[.5[z3,z4],z0];
-pickup rule.nib;
-z40= 1/2[z0,z4] + dir (180+theta) xscaled 2.5u yscaled 2.5u;
-draw z0{z0-z1}..{z4-z0}z40..{z1-z0}z4;
-endchar;
-enddef;
-
-
-def RevLowerBotHook (expr ChCode, ChWidthFrac, ChDepthFrac)=
-compute_spread(.45x_height#,.55x_height);
-beginchar(ChCode,ChWidthFrac*18u#,0,ChDepthFrac*18u#);
-adjust_fit(0,0); pickup crisp.nib;
-x1=(w) ; x0= 0;
-y1=-d; y0=h;
-numeric theta,delta; theta=angle(z1-z0); delta=3u++.24asc_height;
-if abs(theta-45)<2.5: theta:=45; y1:=y0+x1-x0; fi % near-45$^\circ$ angle
-pos1(rule_thickness,-90+theta);
-pos2(1.5rule_thickness,theta);
-pos3(bar,theta); pos4(bar,theta);
-z4=z0+ dir -(90-theta) xscaled spread yscaled spread;
-%dir (90-theta) xscaled (delta+eps) yscaled (delta+eps);
-%z3=z0+ dir -(45-theta) xscaled (delta+eps) yscaled (delta+eps);
-pos5(bar,90-(45-theta)); z5l=z0; pos6(bar,-(45-theta)); z6l=z0;
-z2l=z0;
-z9=.381966[.5[z3,z4],z0];
-z40= 1/2[z0,z4] + dir (180+theta) xscaled 2.5u yscaled 2.5u;
-pickup rule.nib;
-draw z0{z0-z1}..{z4-z0}z40..{z1-z0}z4;
-%penstroke z2e..{z4-z9}z4e;
-
-penlabels(0,1,2,3,4,5,6,9); endchar;
-enddef;
-
-def RevUpperTopHook (expr ChCode, ChWidthFrac, ChDepthFrac)=
-
-beginchar(ChCode,ChWidthFrac*18u#,0,ChDepthFrac*18u#);
-adjust_fit(0,0); pickup crisp.nib;
-x1= 0; x0=(w);
-y1=h; y0=-d;
-numeric theta; theta=angle(z0-z1);
-pos1(rule_thickness,90+theta);
-pos2(1.5rule_thickness,theta);
-pos3(bar,theta); pos4(bar,theta);
-z4=z0+ dir (90+theta) xscaled (spread) yscaled (spread);
-z2r=z0;
-z9=.381966[.5[z3,z4],z0];
-z40= 1/2[z0,z4] + dir theta xscaled 2.5u yscaled 2.5u;
-pickup rule.nib;
-draw z0{z0-z1}..{z4-z0}z40..{z1-z0}z4;
-endchar;
-enddef;
-
-def RevUpperBotHook (expr ChCode, ChWidthFrac, ChDepthFrac)=
-beginchar(ChCode,ChWidthFrac*18u#,0,ChDepthFrac*18u#);
-adjust_fit(0,0); pickup crisp.nib;
-x1= 0; x0=(w);
-y1=h; y0=-d;
-numeric theta; theta=angle(z0-z1);
-pos1(rule_thickness,90+theta);
-pos2(1.5rule_thickness,theta);
-pos3(bar,theta); pos4(bar,theta);
-z4=z0+ dir -(90-theta) xscaled (spread) yscaled (spread);
-z2r=z0;
-z9=.381966[.5[z3,z4],z0];
-z40= 1/2[z0,z4] + dir theta xscaled 2.5u yscaled 2.5u;
-pickup rule.nib;
-draw z0{z0-z1}..{z4-z0}z40..{z1-z0}z4;
-penlabels(0,1,2,3,4,5,6,9); endchar;
-enddef;
-
-
-def RevSquiggle (expr ChCode, ChWidthFrac,ChDepthFrac)=
-
-beginchar(ChCode,ChWidthFrac*18u#,0,ChDepthFrac*18u#);
-adjust_fit(0,0);
-x0= 0; x1=(w);
-y0=h; y1=-d;
-numeric theta,delta; theta=angle(z1-z0);
-delta=3u;
-z2=.5/6[z0,z1];
-z8=5.5/6[z0,z1];
-z3=1/6[z0,z1] + dir (90+theta) xscaled (delta+eps) yscaled (delta+eps);
-z5=3/6[z0,z1] + dir (90+theta) xscaled (delta+eps) yscaled (delta+eps);
-z7=5/6[z0,z1] + dir (90+theta) xscaled (delta+eps) yscaled (delta+eps);
-z4=2/6[z0,z1] + dir -(90-theta) xscaled (delta+eps) yscaled (delta+eps);
-z6=4/6[z0,z1] + dir -(90-theta) xscaled (delta+eps) yscaled (delta+eps);
-
-pickup pencircle scaled rule_thickness;
-draw z0--z2--z3--z4--z5--z6--z7--z8--z1;
-penlabels(1,2); endchar;
-enddef;
-
-RevShaft(0,4/5,1);
-RevShaft(13,3/4,1);
-RevShaft(26,2/3,1);
-RevShaft(39,3/5,1);
-RevShaft(52,1/2,1);
-RevShaft(65,2/5,1);
-RevShaft(78,1/3,1);
-RevShaft(91,1/4,1);
-RevShaft(104,1/5,1);
-
-
-RevDashedShaft(1,4/5,1);
-RevDashedShaft(14,3/4,1);
-RevDashedShaft(27,2/3,1);
-RevDashedShaft(40,3/5,1);
-RevDashedShaft(53,1/2,1);
-RevDashedShaft(66,2/5,1);
-RevDashedShaft(79,1/3,1);
-RevDashedShaft(92,1/4,1);
-RevDashedShaft(105,1/5,1);
-
-
-RevUpperHead(2,4/5,1);
-RevUpperHead(15,3/4,1);
-RevUpperHead(28,2/3,1);
-RevUpperHead(41,3/5,1);
-RevUpperHead(54,1/2,1);
-RevUpperHead(67,2/5,1);
-RevUpperHead(80,1/3,1);
-RevUpperHead(93,1/4,1);
-RevUpperHead(106,1/5,1);
-
-RevLowerHead(3,4/5,1);
-RevLowerHead(16,3/4,1);
-RevLowerHead(29,2/3,1);
-RevLowerHead(42,3/5,1);
-RevLowerHead(55,1/2,1);
-RevLowerHead(68,2/5,1);
-RevLowerHead(81,1/3,1);
-RevLowerHead(94,1/4,1);
-RevLowerHead(107,1/5,1);
-
-RevUpperTopBarb(4,4/5,1);
-RevUpperTopBarb(17,3/4,1);
-RevUpperTopBarb(30,2/3,1);
-RevUpperTopBarb(43,3/5,1);
-RevUpperTopBarb(56,1/2,1);
-RevUpperTopBarb(69,2/5,1);
-RevUpperTopBarb(82,1/3,1);
-RevUpperTopBarb(95,1/4,1);
-RevUpperTopBarb(108,1/5,1);
-
-RevUpperBotBarb(5,4/5,1);
-RevUpperBotBarb(18,3/4,1);
-RevUpperBotBarb(31,2/3,1);
-RevUpperBotBarb(44,3/5,1);
-RevUpperBotBarb(57,1/2,1);
-RevUpperBotBarb(70,2/5,1);
-RevUpperBotBarb(83,1/3,1);
-RevUpperBotBarb(96,1/4,1);
-RevUpperBotBarb(109,1/5,1);
-
-RevLowerTopBarb(6,4/5,1);
-RevLowerTopBarb(19,3/4,1);
-RevLowerTopBarb(32,2/3,1);
-RevLowerTopBarb(45,3/5,1);
-RevLowerTopBarb(58,1/2,1);
-RevLowerTopBarb(71,2/5,1);
-RevLowerTopBarb(84,1/3,1);
-RevLowerTopBarb(97,1/4,1);
-RevLowerTopBarb(110,1/5,1);
-
-
-RevLowerBotBarb(7,4/5,1);
-RevLowerBotBarb(20,3/4,1);
-RevLowerBotBarb(33,2/3,1);
-RevLowerBotBarb(46,3/5,1);
-RevLowerBotBarb(59,1/2,1);
-RevLowerBotBarb(72,2/5,1);
-RevLowerBotBarb(85,1/3,1);
-RevLowerBotBarb(98,1/4,1);
-RevLowerBotBarb(111,1/5,1);
-
-RevLowerTopHook(8,4/5,1);
-RevLowerTopHook(21,3/4,1);
-RevLowerTopHook(34,2/3,1);
-RevLowerTopHook(47,3/5,1);
-RevLowerTopHook(60,1/2,1);
-RevLowerTopHook(73,2/5,1);
-RevLowerTopHook(86,1/3,1);
-RevLowerTopHook(99,1/4,1);
-RevLowerTopHook(112,1/5,1);
-
-
-RevLowerBotHook(9,4/5,1);
-RevLowerBotHook(22,3/4,1);
-RevLowerBotHook(35,2/3,1);
-RevLowerBotHook(48,3/5,1);
-RevLowerBotHook(61,1/2,1);
-RevLowerBotHook(74,2/5,1);
-RevLowerBotHook(87,1/3,1);
-RevLowerBotHook(100,1/4,1);
-RevLowerBotHook(113,1/5,1);
-
-
-RevUpperTopHook(10,4/5,1);
-RevUpperTopHook(23,3/4,1);
-RevUpperTopHook(36,2/3,1);
-RevUpperTopHook(49,3/5,1);
-RevUpperTopHook(62,1/2,1);
-RevUpperTopHook(75,2/5,1);
-RevUpperTopHook(88,1/3,1);
-RevUpperTopHook(101,1/4,1);
-RevUpperTopHook(114,1/5,1);
-
-RevUpperBotHook(11,4/5,1);
-RevUpperBotHook(24,3/4,1);
-RevUpperBotHook(37,2/3,1);
-RevUpperBotHook(50,3/5,1);
-RevUpperBotHook(63,1/2,1);
-RevUpperBotHook(76,2/5,1);
-RevUpperBotHook(89,1/3,1);
-RevUpperBotHook(102,1/4,1);
-RevUpperBotHook(115,1/5,1);
-
-
-RevSquiggle(12,4/5,1);
-RevSquiggle(25,3/4,1);
-RevSquiggle(38,2/3,1);
-RevSquiggle(51,3/5,1);
-RevSquiggle(64,1/2,1);
-RevSquiggle(77,2/5,1);
-RevSquiggle(90,1/3,1);
-RevSquiggle(103,1/4,1);
-RevSquiggle(116,1/5,1);
-
-
-RevUpperHead(117,1/6,1);
-RevLowerHead(118,1/6,1);
-RevUpperTopBarb(119,1/6,1);
-RevUpperBotBarb(120,1/6,1);
-RevLowerTopBarb(121,1/6,1);
-RevLowerBotBarb(122,1/6,1);
-RevLowerTopHook(123,1/6,1);
-RevLowerBotHook(124,1/6,1);
-RevUpperTopHook(125,1/6,1);
-RevUpperBotHook(126,1/6,1);
-RevSquiggle(127,1/6,1);
-bye.
-
-