diff options
Diffstat (limited to 'Master/texmf-dist/fonts/source/public/cmextra')
13 files changed, 1010 insertions, 0 deletions
diff --git a/Master/texmf-dist/fonts/source/public/cmextra/cmbxcd10.mf b/Master/texmf-dist/fonts/source/public/cmextra/cmbxcd10.mf new file mode 100644 index 00000000000..cd1f0f0b0ea --- /dev/null +++ b/Master/texmf-dist/fonts/source/public/cmextra/cmbxcd10.mf @@ -0,0 +1,75 @@ +% Computer Modern Bold Extended Roman 10 point, Caps and Digits Only +if unknown cmbase: input cmbase fi + +font_identifier:="CMBXCD"; font_size 10pt#; + +u#:=23/36pt#; % unit width +width_adj#:=11/36pt#; % width adjustment for certain characters +serif_fit#:=0pt#; % extra sidebar near lowercase serifs +cap_serif_fit#:=7/36pt#; % extra sidebar near uppercase serifs +letter_fit#:=0pt#; % extra space added to all sidebars + +body_height#:=270/36pt#; % height of tallest characters +asc_height#:=250/36pt#; % height of lowercase ascenders +cap_height#:=247/36pt#; % height of caps +fig_height#:=232/36pt#; % height of numerals +x_height#:=160/36pt#; % height of lowercase without ascenders +math_axis#:=90/36pt#; % axis of symmetry for math symbols +bar_height#:=85/36pt#; % height of crossbar in lowercase e +comma_depth#:=70/36pt#; % depth of comma below baseline +desc_depth#:=70/36pt#; % depth of lowercase descenders + +crisp#:=0pt#; % diameter of serif corners +tiny#:=13/36pt#; % diameter of rounded corners +fine#:=10/36pt#; % diameter of sharply rounded corners +thin_join#:=10/36pt#; % width of extrafine details +hair#:=17/36pt#; % lowercase hairline breadth +stem#:=41/36pt#; % lowercase stem breadth +curve#:=46/36pt#; % lowercase curve breadth +ess#:=38/36pt#; % breadth in middle of lowercase s +flare#:=45/36pt#; % diameter of bulbs or breadth of terminals +dot_size#:=56/36pt#; % diameter of dots +cap_hair#:=19/36pt#; % uppercase hairline breadth +cap_stem#:=51/36pt#; % uppercase stem breadth +cap_curve#:=55/36pt#; % uppercase curve breadth +cap_ess#:=53/36pt#; % breadth in middle of uppercase s +rule_thickness#:=.6pt#; % thickness of lines in math symbols + +dish#:=1/36pt#; % amount erased at top or bottom of serifs +bracket#:=10/36pt#; % vertical distance from serif base to tangent +jut#:=25/36pt#; % protrusion of lowercase serifs +cap_jut#:=39/36pt#; % protrusion of uppercase serifs +beak_jut#:=11/36pt#; % horizontal protrusion of beak serifs +beak#:=70/36pt#; % vertical protrusion of beak serifs +vair#:=13/36pt#; % vertical diameter of hairlines +notch_cut#:=10pt#; % maximum breadth above or below notches +bar#:=17/36pt#; % lowercase bar thickness +slab#:=17/36pt#; % serif and arm thickness +cap_bar#:=17/36pt#; % uppercase bar thickness +cap_band#:=17/36pt#; % uppercase thickness above/below lobes +cap_notch_cut#:=10pt#; % max breadth above/below uppercase notches +serif_drop#:=3/36pt#; % vertical drop of sloped serifs +stem_corr#:=2/36pt#; % for small refinements of stem breadth +vair_corr#:=1.5/36pt#; % for small refinements of hairline height +apex_corr#:=0pt#; % extra width at diagonal junctions + +o#:=4/36pt#; % amount of overshoot for curves +apex_o#:=3/36pt#; % amount of overshoot for diagonal junctions + +slant:=0; % tilt ratio $(\Delta x/\Delta y)$ +fudge:=1; % factor applied to weights of heavy characters +math_spread:=.5; % extra openness of math symbols +superness:=8/11; % parameter for superellipses +superpull:=1/8; % extra openness inside bowls +beak_darkness:=.4; % fraction of triangle inside beak serifs +ligs:=2; % level of ligatures to be included + +square_dots:=false; % should dots be square? +hefty:=false; % should we try hard not to be overweight? +serifs:=true; % should serifs and bulbs be attached? +monospace:=false; % should all characters have the same width? +variant_g:=false; % should an italic-style g be used? +low_asterisk:=false; % should the asterisk be centered at the axis? +math_fitting:=false; % should math-mode spacing be used? + +generate title % switch to the driver file diff --git a/Master/texmf-dist/fonts/source/public/cmextra/cmbxti12.mf b/Master/texmf-dist/fonts/source/public/cmextra/cmbxti12.mf new file mode 100644 index 00000000000..299c83ad67f --- /dev/null +++ b/Master/texmf-dist/fonts/source/public/cmextra/cmbxti12.mf @@ -0,0 +1,75 @@ +% Computer Modern Bold Extended Text Italic 12 point +if unknown cmbase: input cmbase fi + +font_identifier:="CMBXTI"; font_size 12pt#; + +u#:=24.9/36pt#; % unit width +width_adj#:=13/36pt#; % width adjustment for certain characters +serif_fit#:=0pt#; % extra sidebar near lowercase serifs +cap_serif_fit#:=8/36pt#; % extra sidebar near uppercase serifs +letter_fit#:=12.5/36pt#; % extra space added to all sidebars + +body_height#:=324/36pt#; % height of tallest characters +asc_height#:=300/36pt#; % height of lowercase ascenders +cap_height#:=296.4/36pt#; % height of caps +fig_height#:=278.8/36pt#; % height of numerals +x_height#:=192/36pt#; % height of lowercase without ascenders +math_axis#:=108/36pt#; % axis of symmetry for math symbols +bar_height#:=102/36pt#; % height of crossbar in lowercase e +comma_depth#:=84/36pt#; % depth of comma below baseline +desc_depth#:=84/36pt#; % depth of lowercase descenders + +crisp#:=13/36pt#; % diameter of serif corners +tiny#:=13/36pt#; % diameter of rounded corners +fine#:=10/36pt#; % diameter of sharply rounded corners +thin_join#:=10.5/36pt#; % width of extrafine details +hair#:=21.5/36pt#; % lowercase hairline breadth +stem#:=44/36pt#; % lowercase stem breadth +curve#:=49/36pt#; % lowercase curve breadth +ess#:=41/36pt#; % breadth in middle of lowercase s +flare#:=48/36pt#; % diameter of bulbs or breadth of terminals +dot_size#:=59/36pt#; % diameter of dots +cap_hair#:=23/36pt#; % uppercase hairline breadth +cap_stem#:=55/36pt#; % uppercase stem breadth +cap_curve#:=59/36pt#; % uppercase curve breadth +cap_ess#:=54/36pt#; % breadth in middle of uppercase s +rule_thickness#:=.66pt#; % thickness of lines in math symbols + +dish#:=1/36pt#; % amount erased at top or bottom of serifs +bracket#:=12/36pt#; % vertical distance from serif base to tangent +jut#:=32/36pt#; % protrusion of lowercase serifs +cap_jut#:=46/36pt#; % protrusion of uppercase serifs +beak_jut#:=11.3/36pt#; % horizontal protrusion of beak serifs +beak#:=84/36pt#; % vertical protrusion of beak serifs +vair#:=14.3/36pt#; % vertical diameter of hairlines +notch_cut#:=12pt#; % maximum breadth above or below notches +bar#:=18.5/36pt#; % lowercase bar thickness +slab#:=18.5/36pt#; % serif and arm thickness +cap_bar#:=18.5/36pt#; % uppercase bar thickness +cap_band#:=18.5/36pt#; % uppercase thickness above/below lobes +cap_notch_cut#:=12pt#; % max breadth above/below uppercase notches +serif_drop#:=3.6/36pt#; % vertical drop of sloped serifs +stem_corr#:=2/36pt#; % for small refinements of stem breadth +vair_corr#:=1.5/36pt#; % for small refinements of hairline height +apex_corr#:=0pt#; % extra width at diagonal junctions + +o#:=7/36pt#; % amount of overshoot for curves +apex_o#:=7/36pt#; % amount of overshoot for diagonal junctions + +slant:=.25; % tilt ratio $(\Delta x/\Delta y)$ +fudge:=1; % factor applied to weights of heavy characters +math_spread:=.4; % extra openness of math symbols +superness:=8/11; % parameter for superellipses +superpull:=1/8; % extra openness inside bowls +beak_darkness:=.4; % fraction of triangle inside beak serifs +ligs:=2; % level of ligatures to be included + +square_dots:=false; % should dots be square? +hefty:=false; % should we try hard not to be overweight? +serifs:=true; % should serifs and bulbs be attached? +monospace:=false; % should all characters have the same width? +variant_g:=true; % should an italic-style g be used? +low_asterisk:=false; % should the asterisk be centered at the axis? +math_fitting:=false; % should math-mode spacing be used? + +generate textit % switch to the driver file diff --git a/Master/texmf-dist/fonts/source/public/cmextra/cmbxti7.mf b/Master/texmf-dist/fonts/source/public/cmextra/cmbxti7.mf new file mode 100644 index 00000000000..984c903eed1 --- /dev/null +++ b/Master/texmf-dist/fonts/source/public/cmextra/cmbxti7.mf @@ -0,0 +1,75 @@ +% Computer Modern Bold Extended Text Italic 7 point +if unknown cmbase: input cmbase fi + +font_identifier:="CMBXTI"; font_size 7pt#; + +u#:=16.5/36pt#; % unit width +width_adj#:=8.6/36pt#; % width adjustment for certain characters +serif_fit#:=0pt#; % extra sidebar near lowercase serifs +cap_serif_fit#:=4.6/36pt#; % extra sidebar near uppercase serifs +letter_fit#:=9/36pt#; % extra space added to all sidebars + +body_height#:=189/36pt#; % height of tallest characters +asc_height#:=175/36pt#; % height of lowercase ascenders +cap_height#:=172.9/36pt#; % height of caps +fig_height#:=162.4/36pt#; % height of numerals +x_height#:=112/36pt#; % height of lowercase without ascenders +math_axis#:=63/36pt#; % axis of symmetry for math symbols +bar_height#:=58/36pt#; % height of crossbar in lowercase e +comma_depth#:=49/36pt#; % depth of comma below baseline +desc_depth#:=49/36pt#; % depth of lowercase descenders + +crisp#:=11/36pt#; % diameter of serif corners +tiny#:=11/36pt#; % diameter of rounded corners +fine#:=9/36pt#; % diameter of sharply rounded corners +thin_join#:=9/36pt#; % width of extrafine details +hair#:=17.8/36pt#; % lowercase hairline breadth +stem#:=30/36pt#; % lowercase stem breadth +curve#:=33/36pt#; % lowercase curve breadth +ess#:=27/36pt#; % breadth in middle of lowercase s +flare#:=33/36pt#; % diameter of bulbs or breadth of terminals +dot_size#:=39/36pt#; % diameter of dots +cap_hair#:=20/36pt#; % uppercase hairline breadth +cap_stem#:=36/36pt#; % uppercase stem breadth +cap_curve#:=39/36pt#; % uppercase curve breadth +cap_ess#:=34/36pt#; % breadth in middle of uppercase s +rule_thickness#:=.51pt#; % thickness of lines in math symbols + +dish#:=.9/36pt#; % amount erased at top or bottom of serifs +bracket#:=7/36pt#; % vertical distance from serif base to tangent +jut#:=19/36pt#; % protrusion of lowercase serifs +cap_jut#:=46/36pt#; % protrusion of uppercase serifs +beak_jut#:=7.7/36pt#; % horizontal protrusion of beak serifs +beak#:=84/36pt#; % vertical protrusion of beak serifs +vair#:=11.5/36pt#; % vertical diameter of hairlines +notch_cut#:=7pt#; % maximum breadth above or below notches +bar#:=14/36pt#; % lowercase bar thickness +slab#:=14/36pt#; % serif and arm thickness +cap_bar#:=14/36pt#; % uppercase bar thickness +cap_band#:=14/36pt#; % uppercase thickness above/below lobes +cap_notch_cut#:=7pt#; % max breadth above/below uppercase notches +serif_drop#:=2.1/36pt#; % vertical drop of sloped serifs +stem_corr#:=1.7/36pt#; % for small refinements of stem breadth +vair_corr#:=1.2/36pt#; % for small refinements of hairline height +apex_corr#:=0pt#; % extra width at diagonal junctions + +o#:=4/36pt#; % amount of overshoot for curves +apex_o#:=4/36pt#; % amount of overshoot for diagonal junctions + +slant:=.25; % tilt ratio $(\Delta x/\Delta y)$ +fudge:=1; % factor applied to weights of heavy characters +math_spread:=1.1; % extra openness of math symbols +superness:=8/11; % parameter for superellipses +superpull:=1/8; % extra openness inside bowls +beak_darkness:=.4; % fraction of triangle inside beak serifs +ligs:=2; % level of ligatures to be included + +square_dots:=false; % should dots be square? +hefty:=false; % should we try hard not to be overweight? +serifs:=true; % should serifs and bulbs be attached? +monospace:=false; % should all characters have the same width? +variant_g:=true; % should an italic-style g be used? +low_asterisk:=false; % should the asterisk be centered at the axis? +math_fitting:=false; % should math-mode spacing be used? + +generate textit % switch to the driver file diff --git a/Master/texmf-dist/fonts/source/public/cmextra/cmcscsl10.mf b/Master/texmf-dist/fonts/source/public/cmextra/cmcscsl10.mf new file mode 100644 index 00000000000..8c6280bb677 --- /dev/null +++ b/Master/texmf-dist/fonts/source/public/cmextra/cmcscsl10.mf @@ -0,0 +1,110 @@ +% Computer Modern Roman Caps and Small Caps Slanted 10 point +if unknown cmbase: input cmbase fi + +font_identifier:="CMCSCSL"; font_size 10pt#; + +% first come parameters used to set the uppercase letters +% (including some for lowercase that aren't actually used) +u#:=21/36pt#; % unit width +width_adj#:=0pt#; % width adjustment for certain characters +serif_fit#:=0pt#; % extra sidebar near lowercase serifs +cap_serif_fit#:=5/36pt#; % extra sidebar near uppercase serifs +letter_fit#:=5/36pt#; % extra space added to all sidebars + +body_height#:=270/36pt#; % height of tallest characters +asc_height#:=250/36pt#; % height of lowercase ascenders +cap_height#:=246/36pt#; % height of caps +fig_height#:=232/36pt#; % height of numerals +x_height#:=155/36pt#; % height of lowercase without ascenders +math_axis#:=90/36pt#; % axis of symmetry for math symbols +bar_height#:=87/36pt#; % height of crossbar in lowercase e +comma_depth#:=70/36pt#; % depth of comma below baseline +desc_depth#:=70/36pt#; % depth of lowercase descenders + +crisp#:=0pt#; % diameter of serif corners +tiny#:=8/36pt#; % diameter of rounded corners +fine#:=7/36pt#; % diameter of sharply rounded corners +thin_join#:=7/36pt#; % width of extrafine details +hair#:=9/36pt#; % lowercase hairline breadth +stem#:=25/36pt#; % lowercase stem breadth +curve#:=30/36pt#; % lowercase curve breadth +ess#:=27/36pt#; % breadth in middle of lowercase s +flare#:=33/36pt#; % diameter of bulbs or breadth of terminals +dot_size#:=38/36pt#; % diameter of dots +cap_hair#:=11/36pt#; % uppercase hairline breadth +cap_stem#:=32/36pt#; % uppercase stem breadth +cap_curve#:=37/36pt#; % uppercase curve breadth +cap_ess#:=35/36pt#; % breadth in middle of uppercase s +rule_thickness#:=.4pt#; % thickness of lines in math symbols + +dish#:=1/36pt#; % amount erased at top or bottom of serifs +bracket#:=20/36pt#; % vertical distance from serif base to tangent +jut#:=28/36pt#; % protrusion of lowercase serifs +cap_jut#:=37/36pt#; % protrusion of uppercase serifs +beak_jut#:=10/36pt#; % horizontal protrusion of beak serifs +beak#:=70/36pt#; % vertical protrusion of beak serifs +vair#:=8/36pt#; % vertical diameter of hairlines +notch_cut#:=10pt#; % maximum breadth above or below notches +bar#:=11/36pt#; % lowercase bar thickness +slab#:=11/36pt#; % serif and arm thickness +cap_bar#:=11/36pt#; % uppercase bar thickness +cap_band#:=11/36pt#; % uppercase thickness above/below lobes +cap_notch_cut#:=10pt#; % max breadth above/below uppercase notches +serif_drop#:=4/36pt#; % vertical drop of sloped serifs +stem_corr#:=1/36pt#; % for small refinements of stem breadth +vair_corr#:=1/36pt#; % for small refinements of hairline height +apex_corr#:=0pt#; % extra width at diagonal junctions + +o#:=8/36pt#; % amount of overshoot for curves +apex_o#:=8/36pt#; % amount of overshoot for diagonal junctions + +slant:=1/6; % tilt ratio $(\Delta x/\Delta y)$ +fudge:=1; % factor applied to weights of heavy characters +math_spread:=0; % extra openness of math symbols +superness:=1/sqrt2; % parameter for superellipses +superpull:=1/6; % extra openness inside bowls +beak_darkness:=11/30; % fraction of triangle inside beak serifs +ligs:=1; % level of ligatures to be included + +square_dots:=false; % should dots be square? +hefty:=false; % should we try hard not to be overweight? +serifs:=true; % should serifs and bulbs be attached? +monospace:=false; % should all characters have the same width? +variant_g:=false; % should an italic-style g be used? +low_asterisk:=false; % should the asterisk be centered at the axis? +math_fitting:=false; % should math-mode spacing be used? + +% now come replacements used to set the lowercase caps + +lower.u#:=16/36pt#; % unit width +lower.width_adj#:=0pt#; % width adjustment for certain characters +lower.cap_serif_fit#:=4/36pt#; % extra sidebar near uppercase serifs +lower.letter_fit#:=2.4/36pt#; % extra space added to all sidebars + +lower.body_height#:=200/36pt#; % height of tallest characters +lower.cap_height#:=185/36pt#; % height of caps +lower.x_height#:=116/36pt#; % height of lowercase without ascenders +lower.bar_height#:=65/36pt#; % height of crossbar in lowercase e +lower.comma_depth#:=52/36pt#; % depth of comma below baseline + +lower.flare#:=25/36pt#; % diameter of bulbs or breadth of terminals +lower.cap_hair#:=9.1/36pt#; % uppercase hairline breadth +lower.stem#:=21/36pt#; % lowercase stem breadth +lower.cap_stem#:=26/36pt#; % uppercase stem breadth +lower.cap_curve#:=31/36pt#; % uppercase curve breadth +lower.cap_ess#:=28/36pt#; % breadth in middle of uppercase s + +lower.cap_jut#:=26/36pt#; % protrusion of uppercase serifs +lower.beak_jut#:=7/36pt#; % horizontal protrusion of beak serifs +lower.beak#:=52/36pt#; % vertical protrusion of beak serifs +lower.slab#:=9.1/36pt#; % serif and arm thickness +lower.cap_bar#:=9.1/36pt#; % uppercase bar thickness +lower.cap_band#:=9.1/36pt#; % uppercase thickness above/below lobes +lower.cap_notch_cut#:=10pt#; % max breadth above/below uppercase notches + +lower.o#:=5/36pt#; % amount of overshoot for curves +lower.apex_o#:=4/36pt#; % amount of overshoot for diagonal junctions + +lower.fudge:=1; % factor applied to weights of heavy characters + +generate csc % switch to the driver file diff --git a/Master/texmf-dist/fonts/source/public/cmextra/cmfibs8.mf b/Master/texmf-dist/fonts/source/public/cmextra/cmfibs8.mf new file mode 100644 index 00000000000..f4b9c09ba24 --- /dev/null +++ b/Master/texmf-dist/fonts/source/public/cmextra/cmfibs8.mf @@ -0,0 +1,75 @@ +% Computer Modern Roman Fibonacci Slanted Font +if unknown cmbase: input cmbase fi + +font_identifier:="CMFIBS"; font_size 8pt#; + +u#:=21/36pt#; % unit width +width_adj#:=0pt#; % width adjustment for certain characters +serif_fit#:=-2/36pt#; % extra sidebar near lowercase serifs +cap_serif_fit#:=0pt#; % extra sidebar near uppercase serifs +letter_fit#:=0pt#; % extra space added to all sidebars + +body_height#:=233/36pt#; % height of tallest characters +asc_height#:=233/36pt#; % height of lowercase ascenders +cap_height#:=233/36pt#; % height of caps +fig_height#:=233/36pt#; % height of numerals +x_height#:=144/36pt#; % height of lowercase without ascenders +math_axis#:=89/36pt#; % axis of symmetry for math symbols +bar_height#:=89/36pt#; % height of crossbar in lowercase e +comma_depth#:=55/36pt#; % depth of comma below baseline +desc_depth#:=55/36pt#; % depth of lowercase descenders + +crisp#:=0pt#; % diameter of serif corners +tiny#:=13/36pt#; % diameter of rounded corners +fine#:=13/36pt#; % diameter of sharply rounded corners +thin_join#:=13/36pt#; % width of extrafine details +hair#:=21/36pt#; % lowercase hairline breadth +stem#:=34/36pt#; % lowercase stem breadth +curve#:=39/36pt#; % lowercase curve breadth +ess#:=34/36pt#; % breadth in middle of lowercase s +flare#:=34/36pt#; % diameter of bulbs or breadth of terminals +dot_size#:=34/36pt#; % diameter of dots +cap_hair#:=21/36pt#; % uppercase hairline breadth +cap_stem#:=34/36pt#; % uppercase stem breadth +cap_curve#:=39/36pt#; % uppercase curve breadth +cap_ess#:=34/36pt#; % breadth in middle of uppercase s +rule_thickness#:=21/36pt#; % thickness of lines in math symbols + +dish#:=1/36pt#; % amount erased at top or bottom of serifs +bracket#:=21/36pt#; % vertical distance from serif base to tangent +jut#:=21/36pt#; % protrusion of lowercase serifs +cap_jut#:=21/36pt#; % protrusion of uppercase serifs +beak_jut#:=13/36pt#; % horizontal protrusion of beak serifs +beak#:=55/36pt#; % vertical protrusion of beak serifs +vair#:=13/36pt#; % vertical diameter of hairlines +notch_cut#:=8pt#; % maximum breadth above or below notches +bar#:=13/36pt#; % lowercase bar thickness +slab#:=13/36pt#; % serif and arm thickness +cap_bar#:=13/36pt#; % uppercase bar thickness +cap_band#:=13/36pt#; % uppercase thickness above/below lobes +cap_notch_cut#:=8pt#; % max breadth above/below uppercase notches +serif_drop#:=3/36pt#; % vertical drop of sloped serifs +stem_corr#:=1/36pt#; % for small refinements of stem breadth +vair_corr#:=1/36pt#; % for small refinements of hairline height +apex_corr#:=0pt#; % extra width at diagonal junctions + +o#:=8/36pt#; % amount of overshoot for curves +apex_o#:=8/36pt#; % amount of overshoot for diagonal junctions + +slant:=sqrt5-2; % tilt ratio $(\Delta x/\Delta y)$ +fudge:=1; % factor applied to weights of heavy characters +math_spread:=3/8; % extra openness of math symbols +superness:=1/sqrt2; % parameter for superellipses +superpull:=1/13; % extra openness inside bowls +beak_darkness:=5/13; % fraction of triangle inside beak serifs +ligs:=2; % level of ligatures to be included + +square_dots:=false; % should dots be square? +hefty:=false; % should we try hard not to be overweight? +serifs:=true; % should serifs and bulbs be attached? +monospace:=false; % should all characters have the same width? +variant_g:=false; % should an italic-style g be used? +low_asterisk:=false; % should the asterisk be centered at the axis? +math_fitting:=false; % should math-mode spacing be used? + +generate roman % switch to the driver file diff --git a/Master/texmf-dist/fonts/source/public/cmextra/cmitt12.mf b/Master/texmf-dist/fonts/source/public/cmextra/cmitt12.mf new file mode 100644 index 00000000000..44a3841c0d8 --- /dev/null +++ b/Master/texmf-dist/fonts/source/public/cmextra/cmitt12.mf @@ -0,0 +1,75 @@ +% Computer Modern Italic Typewriter Text for use with 12 point +if unknown cmbase: input cmbase fi + +font_identifier:="CMITT"; font_size 12pt#; + +u#:=24.7/36pt#; % unit width +width_adj#:=0pt#; % width adjustment for certain characters +serif_fit#:=0pt#; % extra sidebar near lowercase serifs +cap_serif_fit#:=0pt#; % extra sidebar near uppercase serifs +letter_fit#:=18/36pt#; % extra space added to all sidebars + +body_height#:=300/36pt#; % height of tallest characters +asc_height#:=264/36pt#; % height of lowercase ascenders +cap_height#:=264/36pt#; % height of caps +fig_height#:=264/36pt#; % height of numerals +x_height#:=186/36pt#; % height of lowercase without ascenders +math_axis#:=132/36pt#; % axis of symmetry for math symbols +bar_height#:=95/36pt#; % height of crossbar in lowercase e +comma_depth#:=60/36pt#; % depth of comma below baseline +desc_depth#:=96/36pt#; % depth of lowercase descenders + +crisp#:=25/36pt#; % diameter of serif corners +tiny#:=25/36pt#; % diameter of rounded corners +fine#:=22/36pt#; % diameter of sharply rounded corners +thin_join#:=22/36pt#; % width of extrafine details +hair#:=28/36pt#; % lowercase hairline breadth +stem#:=28/36pt#; % lowercase stem breadth +curve#:=28/36pt#; % lowercase curve breadth +ess#:=25/36pt#; % breadth in middle of lowercase s +flare#:=35/36pt#; % diameter of bulbs or breadth of terminals +dot_size#:=39/36pt#; % diameter of dots +cap_hair#:=28/36pt#; % uppercase hairline breadth +cap_stem#:=28/36pt#; % uppercase stem breadth +cap_curve#:=28/36pt#; % uppercase curve breadth +cap_ess#:=28/36pt#; % breadth in middle of uppercase s +rule_thickness#:=28/36pt#; % thickness of lines in math symbols + +dish#:=0pt#; % amount erased at top or bottom of serifs +bracket#:=0pt#; % vertical distance from serif base to tangent +jut#:=46/36pt#; % protrusion of lowercase serifs +cap_jut#:=39/36pt#; % protrusion of uppercase serifs +beak_jut#:=0pt#; % horizontal protrusion of beak serifs +beak#:=39/36pt#; % vertical protrusion of beak serifs +vair#:=25/36pt#; % vertical diameter of hairlines +notch_cut#:=28/36pt#; % maximum breadth above or below notches +bar#:=25/36pt#; % lowercase bar thickness +slab#:=25/36pt#; % serif and arm thickness +cap_bar#:=25/36pt#; % uppercase bar thickness +cap_band#:=25/36pt#; % uppercase thickness above/below lobes +cap_notch_cut#:=28/36pt#; % max breadth above/below uppercase notches +serif_drop#:=0pt#; % vertical drop of sloped serifs +stem_corr#:=0pt#; % for small refinements of stem breadth +vair_corr#:=1.5pt#; % for small refinements of hairline height +apex_corr#:=11/36pt#; % extra width at diagonal junctions + +o#:=5/36pt#; % amount of overshoot for curves +apex_o#:=4/36pt#; % amount of overshoot for diagonal junctions + +slant:=1/4; % tilt ratio $(\Delta x/\Delta y)$ +fudge:=0.86; % factor applied to weights of heavy characters +math_spread:=-1; % extra openness of math symbols +superness:=1/sqrt2; % parameter for superellipses +superpull:=0; % extra openness inside bowls +beak_darkness:=0; % fraction of triangle inside beak serifs +ligs:=0; % level of ligatures to be included + +square_dots:=false; % should dots be square? +hefty:=true; % should we try hard not to be overweight? +serifs:=true; % should serifs and bulbs be attached? +monospace:=true; % should all characters have the same width? +variant_g:=true; % should an italic-style g be used? +low_asterisk:=true; % should the asterisk be centered at the axis? +math_fitting:=false; % should math-mode spacing be used? + +generate textit % switch to the driver file diff --git a/Master/texmf-dist/fonts/source/public/cmextra/cmitt9.mf b/Master/texmf-dist/fonts/source/public/cmextra/cmitt9.mf new file mode 100644 index 00000000000..fdcd1698937 --- /dev/null +++ b/Master/texmf-dist/fonts/source/public/cmextra/cmitt9.mf @@ -0,0 +1,75 @@ +% Computer Modern Italic Typewriter Text for use with 9 point +if unknown cmbase: input cmbase fi + +font_identifier:="CMITT"; font_size 9pt#; + +u#:=18.9/36pt#; % unit width +width_adj#:=0pt#; % width adjustment for certain characters +serif_fit#:=0pt#; % extra sidebar near lowercase serifs +cap_serif_fit#:=0pt#; % extra sidebar near uppercase serifs +letter_fit#:=14/36pt#; % extra space added to all sidebars + +body_height#:=225/36pt#; % height of tallest characters +asc_height#:=198/36pt#; % height of lowercase ascenders +cap_height#:=198/36pt#; % height of caps +fig_height#:=198/36pt#; % height of numerals +x_height#:=139.5/36pt#; % height of lowercase without ascenders +math_axis#:=99/36pt#; % axis of symmetry for math symbols +bar_height#:=71/36pt#; % height of crossbar in lowercase e +comma_depth#:=45/36pt#; % depth of comma below baseline +desc_depth#:=72/36pt#; % depth of lowercase descenders + +crisp#:=21/36pt#; % diameter of serif corners +tiny#:=21/36pt#; % diameter of rounded corners +fine#:=20/36pt#; % diameter of sharply rounded corners +thin_join#:=20/36pt#; % width of extrafine details +hair#:=24/36pt#; % lowercase hairline breadth +stem#:=24/36pt#; % lowercase stem breadth +curve#:=24/36pt#; % lowercase curve breadth +ess#:=21/36pt#; % breadth in middle of lowercase s +flare#:=30/36pt#; % diameter of bulbs or breadth of terminals +dot_size#:=33/36pt#; % diameter of dots +cap_hair#:=24/36pt#; % uppercase hairline breadth +cap_stem#:=24/36pt#; % uppercase stem breadth +cap_curve#:=24/36pt#; % uppercase curve breadth +cap_ess#:=24/36pt#; % breadth in middle of uppercase s +rule_thickness#:=24/36pt#; % thickness of lines in math symbols + +dish#:=0pt#; % amount erased at top or bottom of serifs +bracket#:=0pt#; % vertical distance from serif base to tangent +jut#:=36/36pt#; % protrusion of lowercase serifs +cap_jut#:=31/36pt#; % protrusion of uppercase serifs +beak_jut#:=0pt#; % horizontal protrusion of beak serifs +beak#:=31/36pt#; % vertical protrusion of beak serifs +vair#:=21/36pt#; % vertical diameter of hairlines +notch_cut#:=24/36pt#; % maximum breadth above or below notches +bar#:=21/36pt#; % lowercase bar thickness +slab#:=21/36pt#; % serif and arm thickness +cap_bar#:=21/36pt#; % uppercase bar thickness +cap_band#:=21/36pt#; % uppercase thickness above/below lobes +cap_notch_cut#:=24/36pt#; % max breadth above/below uppercase notches +serif_drop#:=0pt#; % vertical drop of sloped serifs +stem_corr#:=0pt#; % for small refinements of stem breadth +vair_corr#:=1/36pt#; % for small refinements of hairline height +apex_corr#:=9/36pt#; % extra width at diagonal junctions + +o#:=3.5/36pt#; % amount of overshoot for curves +apex_o#:=3/36pt#; % amount of overshoot for diagonal junctions + +slant:=1/4; % tilt ratio $(\Delta x/\Delta y)$ +fudge:=0.81; % factor applied to weights of heavy characters +math_spread:=-1; % extra openness of math symbols +superness:=1/sqrt2; % parameter for superellipses +superpull:=0; % extra openness inside bowls +beak_darkness:=0; % fraction of triangle inside beak serifs +ligs:=0; % level of ligatures to be included + +square_dots:=false; % should dots be square? +hefty:=true; % should we try hard not to be overweight? +serifs:=true; % should serifs and bulbs be attached? +monospace:=true; % should all characters have the same width? +variant_g:=true; % should an italic-style g be used? +low_asterisk:=true; % should the asterisk be centered at the axis? +math_fitting:=false; % should math-mode spacing be used? + +generate textit % switch to the driver file diff --git a/Master/texmf-dist/fonts/source/public/cmextra/cmsl6.mf b/Master/texmf-dist/fonts/source/public/cmextra/cmsl6.mf new file mode 100644 index 00000000000..73227738d2d --- /dev/null +++ b/Master/texmf-dist/fonts/source/public/cmextra/cmsl6.mf @@ -0,0 +1,75 @@ +% Computer Modern Slanted Roman 6 point +if unknown cmbase: input cmbase fi + +font_identifier:="CMSL"; font_size 6pt#; + +u#:=14/36pt#; % unit width +width_adj#:=0pt#; % width adjustment for certain characters +serif_fit#:=0pt#; % extra sidebar near lowercase serifs +cap_serif_fit#:=2.8/36pt#; % extra sidebar near uppercase serifs +letter_fit#:=3/36pt#; % extra space added to all sidebars + +body_height#:=162/36pt#; % height of tallest characters +asc_height#:=150/36pt#; % height of lowercase ascenders +cap_height#:=147.6/36pt#; % height of caps +fig_height#:=139.2/36pt#; % height of numerals +x_height#:=93/36pt#; % height of lowercase without ascenders +math_axis#:=54/36pt#; % axis of symmetry for math symbols +bar_height#:=52.2/36pt#; % height of crossbar in lowercase e +comma_depth#:=42/36pt#; % depth of comma below baseline +desc_depth#:=42/36pt#; % depth of lowercase descenders + +crisp#:=0pt#; % diameter of serif corners +tiny#:=7/36pt#; % diameter of rounded corners +fine#:=6/36pt#; % diameter of sharply rounded corners +thin_join#:=6/36pt#; % width of extrafine details +hair#:=8/36pt#; % lowercase hairline breadth +stem#:=18/36pt#; % lowercase stem breadth +curve#:=20.5/36pt#; % lowercase curve breadth +ess#:=17/36pt#; % breadth in middle of lowercase s +flare#:=21/36pt#; % diameter of bulbs or breadth of terminals +dot_size#:=26/36pt#; % diameter of dots +cap_hair#:=8.5/36pt#; % uppercase hairline breadth +cap_stem#:=21.5/36pt#; % uppercase stem breadth +cap_curve#:=24/36pt#; % uppercase curve breadth +cap_ess#:=19/36pt#; % breadth in middle of uppercase s +rule_thickness#:=.31pt#; % thickness of lines in math symbols + +dish#:=.8/36pt#; % amount erased at top or bottom of serifs +bracket#:=12/36pt#; % vertical distance from serif base to tangent +jut#:=17/36pt#; % protrusion of lowercase serifs +cap_jut#:=23/36pt#; % protrusion of uppercase serifs +beak_jut#:=6.8/36pt#; % horizontal protrusion of beak serifs +beak#:=42/36pt#; % vertical protrusion of beak serifs +vair#:=7/36pt#; % vertical diameter of hairlines +notch_cut#:=6pt#; % maximum breadth above or below notches +bar#:=8.5/36pt#; % lowercase bar thickness +slab#:=8.5/36pt#; % serif and arm thickness +cap_bar#:=8.5/36pt#; % uppercase bar thickness +cap_band#:=8.5/36pt#; % uppercase thickness above/below lobes +cap_notch_cut#:=6pt#; % max breadth above/below uppercase notches +serif_drop#:=2.4/36pt#; % vertical drop of sloped serifs +stem_corr#:=.8/36pt#; % for small refinements of stem breadth +vair_corr#:=.7/36pt#; % for small refinements of hairline height +apex_corr#:=0pt#; % extra width at diagonal junctions + +o#:=4.5/36pt#; % amount of overshoot for curves +apex_o#:=4.5/36pt#; % amount of overshoot for diagonal junctions + +slant:=1/6; % tilt ratio $(\Delta x/\Delta y)$ +fudge:=1; % factor applied to weights of heavy characters +math_spread:=.8; % extra openness of math symbols +superness:=1/sqrt2; % parameter for superellipses +superpull:=1/6; % extra openness inside bowls +beak_darkness:=11/30; % fraction of triangle inside beak serifs +ligs:=2; % level of ligatures to be included + +square_dots:=false; % should dots be square? +hefty:=false; % should we try hard not to be overweight? +serifs:=true; % should serifs and bulbs be attached? +monospace:=false; % should all characters have the same width? +variant_g:=false; % should an italic-style g be used? +low_asterisk:=false; % should the asterisk be centered at the axis? +math_fitting:=false; % should math-mode spacing be used? + +generate roman % switch to the driver file diff --git a/Master/texmf-dist/fonts/source/public/cmextra/cmsltt9.mf b/Master/texmf-dist/fonts/source/public/cmextra/cmsltt9.mf new file mode 100644 index 00000000000..324d8029d36 --- /dev/null +++ b/Master/texmf-dist/fonts/source/public/cmextra/cmsltt9.mf @@ -0,0 +1,75 @@ +% Computer Modern Slanted Typewriter Text for use with 9 point +if unknown cmbase: input cmbase fi + +font_identifier:="CMSLTT"; font_size 9pt#; + +u#:=18.9/36pt#; % unit width +width_adj#:=0pt#; % width adjustment for certain characters +serif_fit#:=0pt#; % extra sidebar near lowercase serifs +cap_serif_fit#:=0pt#; % extra sidebar near uppercase serifs +letter_fit#:=0pt#; % extra space added to all sidebars + +body_height#:=225/36pt#; % height of tallest characters +asc_height#:=198/36pt#; % height of lowercase ascenders +cap_height#:=198/36pt#; % height of caps +fig_height#:=198/36pt#; % height of numerals +x_height#:=139.5/36pt#; % height of lowercase without ascenders +math_axis#:=99/36pt#; % axis of symmetry for math symbols +bar_height#:=71/36pt#; % height of crossbar in lowercase e +comma_depth#:=45/36pt#; % depth of comma below baseline +desc_depth#:=72/36pt#; % depth of lowercase descenders + +crisp#:=21/36pt#; % diameter of serif corners +tiny#:=21/36pt#; % diameter of rounded corners +fine#:=20/36pt#; % diameter of sharply rounded corners +thin_join#:=20/36pt#; % width of extrafine details +hair#:=24/36pt#; % lowercase hairline breadth +stem#:=24/36pt#; % lowercase stem breadth +curve#:=24/36pt#; % lowercase curve breadth +ess#:=21/36pt#; % breadth in middle of lowercase s +flare#:=30/36pt#; % diameter of bulbs or breadth of terminals +dot_size#:=33/36pt#; % diameter of dots +cap_hair#:=24/36pt#; % uppercase hairline breadth +cap_stem#:=24/36pt#; % uppercase stem breadth +cap_curve#:=24/36pt#; % uppercase curve breadth +cap_ess#:=24/36pt#; % breadth in middle of uppercase s +rule_thickness#:=24/36pt#; % thickness of lines in math symbols + +dish#:=0pt#; % amount erased at top or bottom of serifs +bracket#:=0pt#; % vertical distance from serif base to tangent +jut#:=31/36pt#; % protrusion of lowercase serifs +cap_jut#:=31/36pt#; % protrusion of uppercase serifs +beak_jut#:=0pt#; % horizontal protrusion of beak serifs +beak#:=31/36pt#; % vertical protrusion of beak serifs +vair#:=21/36pt#; % vertical diameter of hairlines +notch_cut#:=24/36pt#; % maximum breadth above or below notches +bar#:=21/36pt#; % lowercase bar thickness +slab#:=21/36pt#; % serif and arm thickness +cap_bar#:=21/36pt#; % uppercase bar thickness +cap_band#:=21/36pt#; % uppercase thickness above/below lobes +cap_notch_cut#:=24/36pt#; % max breadth above/below uppercase notches +serif_drop#:=0pt#; % vertical drop of sloped serifs +stem_corr#:=0pt#; % for small refinements of stem breadth +vair_corr#:=0pt#; % for small refinements of hairline height +apex_corr#:=9/36pt#; % extra width at diagonal junctions + +o#:=3.5/36pt#; % amount of overshoot for curves +apex_o#:=3/36pt#; % amount of overshoot for diagonal junctions + +slant:=1/6; % tilt ratio $(\Delta x/\Delta y)$ +fudge:=0.81; % factor applied to weights of heavy characters +math_spread:=-1; % extra openness of math symbols +superness:=1/sqrt2; % parameter for superellipses +superpull:=0; % extra openness inside bowls +beak_darkness:=0; % fraction of triangle inside beak serifs +ligs:=0; % level of ligatures to be included + +square_dots:=false; % should dots be square? +hefty:=true; % should we try hard not to be overweight? +serifs:=true; % should serifs and bulbs be attached? +monospace:=true; % should all characters have the same width? +variant_g:=false; % should an italic-style g be used? +low_asterisk:=true; % should the asterisk be centered at the axis? +math_fitting:=false; % should math-mode spacing be used? + +generate roman % switch to the driver file diff --git a/Master/texmf-dist/fonts/source/public/cmextra/cmssbxo10.mf b/Master/texmf-dist/fonts/source/public/cmextra/cmssbxo10.mf new file mode 100644 index 00000000000..d7d7345fe1e --- /dev/null +++ b/Master/texmf-dist/fonts/source/public/cmextra/cmssbxo10.mf @@ -0,0 +1,75 @@ +% Computer Modern Slanted Sans Serif Bold Extended 10 pt +if unknown cmbase: input cmbase fi + +font_identifier:="CMSSBXO"; font_size 10pt#; % "O" is for "oblique" + +u#:=22/36pt#; % unit width +width_adj#:=22/36pt#; % width adjustment for certain characters +serif_fit#:=-9/36pt#; % extra sidebar near lowercase serifs +cap_serif_fit#:=-11/36pt#; % extra sidebar near uppercase serifs +letter_fit#:=0pt#; % extra space added to all sidebars + +body_height#:=270/36pt#; % height of tallest characters +asc_height#:=250/36pt#; % height of lowercase ascenders +cap_height#:=250/36pt#; % height of caps +fig_height#:=250/36pt#; % height of numerals +x_height#:=165/36pt#; % height of lowercase without ascenders +math_axis#:=90/36pt#; % axis of symmetry for math symbols +bar_height#:=90/36pt#; % height of crossbar in lowercase e +comma_depth#:=38/36pt#; % depth of comma below baseline +desc_depth#:=70/36pt#; % depth of lowercase descenders + +crisp#:=26/36pt#; % diameter of serif corners +tiny#:=26/36pt#; % diameter of rounded corners +fine#:=9/36pt#; % diameter of sharply rounded corners +thin_join#:=9/36pt#; % width of extrafine details +hair#:=49/36pt#; % lowercase hairline breadth +stem#:=49/36pt#; % lowercase stem breadth +curve#:=49/36pt#; % lowercase curve breadth +ess#:=43/36pt#; % breadth in middle of lowercase s +flare#:=40/36pt#; % diameter of bulbs or breadth of terminals +dot_size#:=47/36pt#; % diameter of dots +cap_hair#:=49/36pt#; % uppercase hairline breadth +cap_stem#:=53/36pt#; % uppercase stem breadth +cap_curve#:=53/36pt#; % uppercase curve breadth +cap_ess#:=51/36pt#; % breadth in middle of uppercase s +rule_thickness#:=30/36pt#; % thickness of lines in math symbols + +dish#:=0pt#; % amount erased at top or bottom of serifs +bracket#:=0pt#; % vertical distance from serif base to tangent +jut#:=0pt#; % protrusion of lowercase serifs +cap_jut#:=0pt#; % protrusion of uppercase serifs +beak_jut#:=0pt#; % horizontal protrusion of beak serifs +beak#:=1.5/36pt#; % vertical protrusion of beak serifs +vair#:=26/36pt#; % vertical diameter of hairlines +notch_cut#:=49/36pt#; % maximum breadth above or below notches +bar#:=26/36pt#; % lowercase bar thickness +slab#:=36/36pt#; % serif and arm thickness +cap_bar#:=34/36pt#; % uppercase bar thickness +cap_band#:=31/36pt#; % uppercase thickness above/below lobes +cap_notch_cut#:=45/36pt#; % max breadth above/below uppercase notches +serif_drop#:=2/36pt#; % vertical drop of sloped serifs +stem_corr#:=1/36pt#; % for small refinements of stem breadth +vair_corr#:=2/36pt#; % for small refinements of hairline height +apex_corr#:=18/36pt#; % extra width at diagonal junctions + +o#:=8/36pt#; % amount of overshoot for curves +apex_o#:=0pt#; % amount of overshoot for diagonal junctions + +slant:=sind 12/cosd 12; % tilt ratio $(\Delta x/\Delta y)$ +fudge:=.88; % factor applied to weights of heavy characters +math_spread:=.5; % extra openness of math symbols +superness:=3/4; % parameter for superellipses +superpull:=1/18; % extra openness inside bowls +beak_darkness:=0; % fraction of triangle inside beak serifs +ligs:=2; % level of ligatures to be included + +square_dots:=true; % should dots be square? +hefty:=true; % should we try hard not to be overweight? +serifs:=false; % should serifs and bulbs be attached? +monospace:=false; % should all characters have the same width? +variant_g:=false; % should an italic-style g be used? +low_asterisk:=false; % should the asterisk be centered at the axis? +math_fitting:=false; % should math-mode spacing be used? + +generate roman % switch to the driver file diff --git a/Master/texmf-dist/fonts/source/public/cmextra/cmsslu30.mf b/Master/texmf-dist/fonts/source/public/cmextra/cmsslu30.mf new file mode 100644 index 00000000000..9e5ec2a0313 --- /dev/null +++ b/Master/texmf-dist/fonts/source/public/cmextra/cmsslu30.mf @@ -0,0 +1,75 @@ +% Computer Modern Sans Serif Light UltraCondensed for C+T title pages +if unknown cmbase: input cmbase fi + +font_identifier:="CMSSLU"; font_size 30pt#; + +u#:=30/36pt#; % unit width +width_adj#:=20/36pt#; % width adjustment for certain characters +serif_fit#:=-12/36pt#; % extra sidebar near lowercase serifs +cap_serif_fit#:=-15/36pt#; % extra sidebar near uppercase serifs +letter_fit#:=0pt#; % extra space added to all sidebars + +body_height#:=750/36pt#; % height of tallest characters +asc_height#:=750/36pt#; % height of lowercase ascenders +cap_height#:=750/36pt#; % height of caps +fig_height#:=750/36pt#; % height of numerals +x_height#:=510/36pt#; % height of lowercase without ascenders +math_axis#:=.5cap_height#; % axis of symmetry for math symbols +bar_height#:=285/36pt#; % height of crossbar in lowercase e +comma_depth#:=120/36pt#; % depth of comma below baseline +desc_depth#:=180/36pt#; % depth of lowercase descenders + +crisp#:=23/36pt#; % diameter of serif corners +tiny#:=23/36pt#; % diameter of rounded corners +fine#:=23/36pt#; % diameter of sharply rounded corners +thin_join#:=23/36pt#; % width of extrafine details +hair#:=27/36pt#; % lowercase hairline breadth +stem#:=27/36pt#; % lowercase stem breadth +curve#:=27/36pt#; % lowercase curve breadth +ess#:=27/36pt#; % breadth in middle of lowercase s +flare#:=29/36pt#; % diameter of bulbs or breadth of terminals +dot_size#:=30/36pt#; % diameter of dots +cap_hair#:=27/36pt#; % uppercase hairline breadth +cap_stem#:=27/36pt#; % uppercase stem breadth +cap_curve#:=27/36pt#; % uppercase curve breadth +cap_ess#:=27/36pt#; % breadth in middle of uppercase s +rule_thickness#:=25/36pt#; % thickness of lines in math symbols + +dish#:=0pt#; % amount erased at top or bottom of serifs +bracket#:=0pt#; % vertical distance from serif base to tangent +jut#:=0pt#; % protrusion of lowercase serifs +cap_jut#:=0pt#; % protrusion of uppercase serifs +beak_jut#:=0pt#; % horizontal protrusion of beak serifs +beak#:=1.5/36pt#; % vertical protrusion of beak serifs +vair#:=23/36pt#; % vertical diameter of hairlines +notch_cut#:=27/36pt#; % maximum breadth above or below notches +bar#:=23/36pt#; % lowercase bar thickness +slab#:=27/36pt#; % serif and arm thickness +cap_bar#:=27/36pt#; % uppercase bar thickness +cap_band#:=27/36pt#; % uppercase thickness above/below lobes +cap_notch_cut#:=27/36pt#; % max breadth above/below uppercase notches +serif_drop#:=2/36pt#; % vertical drop of sloped serifs +stem_corr#:=0/36pt#; % for small refinements of stem breadth +vair_corr#:=0/36pt#; % for small refinements of hairline height +apex_corr#:=0/36pt#; % extra width at diagonal junctions + +o#:=7/36pt#; % amount of overshoot for curves +apex_o#:=0pt#; % amount of overshoot for diagonal junctions + +slant:=0; % tilt ratio $(\Delta x/\Delta y)$ +fudge:=1; % factor applied to weights of heavy characters +math_spread:=.3; % extra openness of math symbols +superness:=.75; % parameter for superellipses +superpull:=0; % extra openness inside bowls +beak_darkness:=0; % fraction of triangle inside beak serifs +ligs:=2; % level of ligatures to be included + +square_dots:=false; % should dots be square? +hefty:=true; % should we try hard not to be overweight? +serifs:=false; % should serifs and bulbs be attached? +monospace:=false; % should all characters have the same width? +variant_g:=true; % should an italic-style g be used? +low_asterisk:=false; % should the asterisk be centered at the axis? +math_fitting:=false; % should math-mode spacing be used? + +generate roman % switch to the driver file diff --git a/Master/texmf-dist/fonts/source/public/cmextra/cmssu30.mf b/Master/texmf-dist/fonts/source/public/cmextra/cmssu30.mf new file mode 100644 index 00000000000..7288820cd28 --- /dev/null +++ b/Master/texmf-dist/fonts/source/public/cmextra/cmssu30.mf @@ -0,0 +1,75 @@ +% Computer Modern Sans Serif UltraCondensed for C+T boards +if unknown cmbase: input cmbase fi + +font_identifier:="CMSSU"; font_size 30pt#; + +u#:=30/36pt#; % unit width +width_adj#:=20/36pt#; % width adjustment for certain characters +serif_fit#:=-12/36pt#; % extra sidebar near lowercase serifs +cap_serif_fit#:=-15/36pt#; % extra sidebar near uppercase serifs +letter_fit#:=0pt#; % extra space added to all sidebars + +body_height#:=750/36pt#; % height of tallest characters +asc_height#:=750/36pt#; % height of lowercase ascenders +cap_height#:=750/36pt#; % height of caps +fig_height#:=750/36pt#; % height of numerals +x_height#:=510/36pt#; % height of lowercase without ascenders +math_axis#:=.5cap_height#; % axis of symmetry for math symbols +bar_height#:=285/36pt#; % height of crossbar in lowercase e +comma_depth#:=120/36pt#; % depth of comma below baseline +desc_depth#:=180/36pt#; % depth of lowercase descenders + +crisp#:=23/36pt#; % diameter of serif corners +tiny#:=23/36pt#; % diameter of rounded corners +fine#:=23/36pt#; % diameter of sharply rounded corners +thin_join#:=46/36pt#; % width of extrafine details +hair#:=54/36pt#; % lowercase hairline breadth +stem#:=54/36pt#; % lowercase stem breadth +curve#:=54/36pt#; % lowercase curve breadth +ess#:=54/36pt#; % breadth in middle of lowercase s +flare#:=58/36pt#; % diameter of bulbs or breadth of terminals +dot_size#:=60/36pt#; % diameter of dots +cap_hair#:=54/36pt#; % uppercase hairline breadth +cap_stem#:=54/36pt#; % uppercase stem breadth +cap_curve#:=54/36pt#; % uppercase curve breadth +cap_ess#:=54/36pt#; % breadth in middle of uppercase s +rule_thickness#:=50/36pt#; % thickness of lines in math symbols + +dish#:=0pt#; % amount erased at top or bottom of serifs +bracket#:=0pt#; % vertical distance from serif base to tangent +jut#:=0pt#; % protrusion of lowercase serifs +cap_jut#:=0pt#; % protrusion of uppercase serifs +beak_jut#:=0pt#; % horizontal protrusion of beak serifs +beak#:=1.5/36pt#; % vertical protrusion of beak serifs +vair#:=50/36pt#; % vertical diameter of hairlines +notch_cut#:=54/36pt#; % maximum breadth above or below notches +bar#:=48/36pt#; % lowercase bar thickness +slab#:=54/36pt#; % serif and arm thickness +cap_bar#:=54/36pt#; % uppercase bar thickness +cap_band#:=54/36pt#; % uppercase thickness above/below lobes +cap_notch_cut#:=54/36pt#; % max breadth above/below uppercase notches +serif_drop#:=2/36pt#; % vertical drop of sloped serifs +stem_corr#:=0/36pt#; % for small refinements of stem breadth +vair_corr#:=0/36pt#; % for small refinements of hairline height +apex_corr#:=0/36pt#; % extra width at diagonal junctions + +o#:=7/36pt#; % amount of overshoot for curves +apex_o#:=0pt#; % amount of overshoot for diagonal junctions + +slant:=0; % tilt ratio $(\Delta x/\Delta y)$ +fudge:=1; % factor applied to weights of heavy characters +math_spread:=.3; % extra openness of math symbols +superness:=.75; % parameter for superellipses +superpull:=0; % extra openness inside bowls +beak_darkness:=0; % fraction of triangle inside beak serifs +ligs:=2; % level of ligatures to be included + +square_dots:=false; % should dots be square? +hefty:=true; % should we try hard not to be overweight? +serifs:=false; % should serifs and bulbs be attached? +monospace:=false; % should all characters have the same width? +variant_g:=true; % should an italic-style g be used? +low_asterisk:=false; % should the asterisk be centered at the axis? +math_fitting:=false; % should math-mode spacing be used? + +generate roman % switch to the driver file diff --git a/Master/texmf-dist/fonts/source/public/cmextra/cmvtti10.mf b/Master/texmf-dist/fonts/source/public/cmextra/cmvtti10.mf new file mode 100644 index 00000000000..535f4d87b23 --- /dev/null +++ b/Master/texmf-dist/fonts/source/public/cmextra/cmvtti10.mf @@ -0,0 +1,75 @@ +% Computer Modern Variable-Width Typewriter Text Italic for use with 10 point +if unknown cmbase: input cmbase fi + +font_identifier:="CMVTTI"; font_size 10pt#; + +u#:=21/36pt#; % unit width +width_adj#:=0pt#; % width adjustment for certain characters +serif_fit#:=0pt#; % extra sidebar near lowercase serifs +cap_serif_fit#:=0pt#; % extra sidebar near uppercase serifs +letter_fit#:=15/36pt#; % extra space added to all sidebars + +body_height#:=250/36pt#; % height of tallest characters +asc_height#:=220/36pt#; % height of lowercase ascenders +cap_height#:=220/36pt#; % height of caps +fig_height#:=220/36pt#; % height of numerals +x_height#:=155/36pt#; % height of lowercase without ascenders +math_axis#:=110/36pt#; % axis of symmetry for math symbols +bar_height#:=79/36pt#; % height of crossbar in lowercase e +comma_depth#:=50/36pt#; % depth of comma below baseline +desc_depth#:=80/36pt#; % depth of lowercase descenders + +crisp#:=22/36pt#; % diameter of serif corners +tiny#:=22/36pt#; % diameter of rounded corners +fine#:=21/36pt#; % diameter of sharply rounded corners +thin_join#:=21/36pt#; % width of extrafine details +hair#:=25/36pt#; % lowercase hairline breadth +stem#:=25/36pt#; % lowercase stem breadth +curve#:=25/36pt#; % lowercase curve breadth +ess#:=22/36pt#; % breadth in middle of lowercase s +flare#:=32/36pt#; % diameter of bulbs or breadth of terminals +dot_size#:=36/36pt#; % diameter of dots +cap_hair#:=25/36pt#; % uppercase hairline breadth +cap_stem#:=25/36pt#; % uppercase stem breadth +cap_curve#:=25/36pt#; % uppercase curve breadth +cap_ess#:=25/36pt#; % breadth in middle of uppercase s +rule_thickness#:=25/36pt#; % thickness of lines in math symbols + +dish#:=0pt#; % amount erased at top or bottom of serifs +bracket#:=0pt#; % vertical distance from serif base to tangent +jut#:=40/36pt#; % protrusion of lowercase serifs +cap_jut#:=34/36pt#; % protrusion of uppercase serifs +beak_jut#:=0pt#; % horizontal protrusion of beak serifs +beak#:=34/36pt#; % vertical protrusion of beak serifs +vair#:=22/36pt#; % vertical diameter of hairlines +notch_cut#:=25/36pt#; % maximum breadth above or below notches +bar#:=22/36pt#; % lowercase bar thickness +slab#:=22/36pt#; % serif and arm thickness +cap_bar#:=22/36pt#; % uppercase bar thickness +cap_band#:=22/36pt#; % uppercase thickness above/below lobes +cap_notch_cut#:=25/36pt#; % max breadth above/below uppercase notches +serif_drop#:=0pt#; % vertical drop of sloped serifs +stem_corr#:=0pt#; % for small refinements of stem breadth +vair_corr#:=1.5/36pt#; % for small refinements of hairline height +apex_corr#:=10/36pt#; % extra width at diagonal junctions + +o#:=4/36pt#; % amount of overshoot for curves +apex_o#:=3/36pt#; % amount of overshoot for diagonal junctions + +slant:=1/4; % tilt ratio $(\Delta x/\Delta y)$ +fudge:=0.81; % factor applied to weights of heavy characters +math_spread:=-1; % extra openness of math symbols +superness:=1/sqrt2; % parameter for superellipses +superpull:=0; % extra openness inside bowls +beak_darkness:=0; % fraction of triangle inside beak serifs +ligs:=2; % level of ligatures to be included + +square_dots:=false; % should dots be square? +hefty:=true; % should we try hard not to be overweight? +serifs:=true; % should serifs and bulbs be attached? +monospace:=false; % should all characters have the same width? +variant_g:=true; % should an italic-style g be used? +low_asterisk:=true; % should the asterisk be centered at the axis? +math_fitting:=false; % should math-mode spacing be used? + +generate textit % switch to the driver file |