diff options
Diffstat (limited to 'Master/texmf-dist/doc')
18 files changed, 104 insertions, 36 deletions
diff --git a/Master/texmf-dist/doc/latex/biblatex-dw/CHANGES b/Master/texmf-dist/doc/latex/biblatex-dw/CHANGES index eddca4163a9..bda9b79f2db 100644 --- a/Master/texmf-dist/doc/latex/biblatex-dw/CHANGES +++ b/Master/texmf-dist/doc/latex/biblatex-dw/CHANGES @@ -1 +1 @@ -biblatex-dw 2011/11/20 v1.4
Copyright (c) 2008-2011 Dominik Waßenhoven <domwass(at)web.de>
Version history
---------------
v1.4 [2011/11/20]
This version of biblatex-dw was tested with biblatex 1.7 and
requires at least version 1.6 of biblatex.
- BUGFIX: With @review entries cited by \fullcite or
\footfullcite the reviewed work was not printed in full.
This is now fixed.
- BUGFIX: With "shorthandinbib=true" and "terselos=false",
the shorthand was printed twice in the list of
shorthands. This is now fixed.
- The \smartcite commands introduced by biblatex 1.2 are
now supported.
- The \textcite and \textcites commands are now also supported
by footnote-dw.
- New command \textcitesdelim: delimiter between author names
when using \textcites. The default is:
\addspace\bibstring{and}\space
- New option "seriesformat" which can take the values
"standard" and "parens". If set to "parens", the series
of a book etc. will be printed in parentheses, otherwise
without (as is the biblatex standard behaviour). The
default value for this option is "parens" (as was the
behaviour in earlier biblatex-dw versions).
- New option "editorstringfont" which can take the values
"normal" and "namefont". With "normal", the normal font
is used, with "namefont", the setting for the option
"namefont" is also used for the editor string (and
translator string etc.). The default value for this
option is "normal".
- New option "editionstring": If set to "true", the
bibliography string "edition" will be added to the
"edition" field, even if it is not an integer. Thus,
you can type, e.g.,
edition = {2., aktualisierte}
in your bib file and you will get "2., aktualisierte
Aufl." (or, with option abbreviate=false: "2.,
aktualisierte Auflage"). "editionstring=false" will give
biblatex’s default behaviour. The default for this option
is "false".
- New entry option "oldbookauthor" which is equivalent to
"oldauthor" but for the bookauthor (this is useful for
@inbook entries representing, e.g., an introduction to an
edition of a work by an author that should not be typeset
in the usual font for last names). This option can be set
on a per entry basis and can be disabled with the global
option "oldauthor=false".
- Improved options "namefont", "firstnamefont", "idemfont"
and "ibidemfont" which are now aware of the setting of
the biblatex option "punctfont".
- Small bugfix for the xref functionality.
v1.3c [2011/02/06]
This version of biblatex-dw needs biblatex 1.1a. Please note
that you have to update biblatex as well if you would like
to use biblatex-dw 1.3c!
- BUGFIX: Under some circumstances, an error occurred
(command \cbx@tempa could not be found). This should be
fixed now.
- BUGFIX: Some of the German translations were broken due
to a change of internal commands in biblatex. This is now
fixed.
- The entry type @review is now supported. You can
specify a reviewed work via the xref field. See the
documentation for details.
- Some internal changes concerning \DeclareFieldFormat
directives.
v1.3b [2010/11/21]
This version of biblatex-dw was tested against biblatex 1.0,
but it should also work with versions from biblatex 0.9d.
The following changes were made to biblatex-dw:
- BUGFIX: Using pagetotal=false and citepages=separate, the
herename was printed as soon as the pagetotal field was
present (although the pagetotal field itself was not
printed). This is now fixed, and the citepages option
pays attention to the pagetotal option.
- In order to match as closely as possible to biblatex
itself, the \citenamepunct command was renamed to
\nametitledelim. For compatibility reasons with earlier
versions of biblatex-dw, the \citenamepunct was kept.
Thus, it does not matter if you redefine \nametitledelim
or \citenamepunct, the effect will be the same; but note
that the \citenamepunct may be dropped in later versions
of biblatex-dw.
- In full citations \nametitledelim is used instead of
\labelnamepunct.
- Improvements regarding idem functionality in combination
with xref=true.
- Improved the documentation.
v1.3a [2010/09/21]
This version of biblatex-dw supports biblatex 0.9d. Please
note that you have to update biblatex at least to version
0.9b if you would like to use biblatex-dw 1.3a! You will
also need to install the package logreq which is a new
requirement since biblatex 0.9b. Users might also need to
update their data due to some changes in biblatex 0.9a and
biblatex 0.9b. Please follow the hints for users given in
biblatex’s RELEASE notes for both of these versions.
The following changes were made to biblatex-dw:
- Option "omitpages" was renamed to "citepages" and
enhanced. As in the verbose standard styles, you can now
choose between "permit", "omit", "suppress" and
"separate". Other as in the biblatex styles, the standard
for this option in biblatex-dw is "separate".
- Option "herename" dropped. The same functionality can now
be achieved by using "citepages=separate". Note that the
bibliography string "herename" was also dropped,
"thiscite" is used instead.
- New option "shorthandinbib": if set to "true", the
shorthand of each entry will be typeset in the
bibliography before each item. The shorthand will be set
in brackets, separated by a space. You can customize this
behaviour by adjusting the following commands:
\DeclareFieldFormat{shorthandinbib}{\mkbibbrackets{#1}}
\newcommand*{\shorthandinbibpunct}{\addspace}
The default for "shorthandinbib" is "false".
- BUGFIX: The shorthandpunct could not be redefined by a
simple \renewcommand, but only as an argument of
\AtBeginDocument. This is now fixed, and a simple
\renewcommand is sufficient.
- BUGFIX: The shorthandpunct was also printed, when the
option "shorthandwidth" was not in use (this had only
effect, when the shorthandpunct was redefined). This is
now fixed.
- BUGFIX: When using authortitle-dw with "firstfull=true",
a \parencite had an erroneous space for the first
citation without a postnote. This is now fixed.
- BUGFIX: The new editorial roles introduced in biblatex
0.9 were not fully supported. This is now fixed.
- BUGFIX: The option "firstfullname" did not work with
biblatex’s option "uniquename". This is now fixed.
- BUGFIX: When using hyperref, some links to the
bibliography were broken. This should now be fixed.
- BUGFIX: In @inbook entries the punctuation after a book
author was not the \labelnamepunct. This is now fixed.
v1.3 [2010/03/11]
This version of biblatex-dw supports biblatex 0.9. Please
note that you have to update biblatex as well if you would
like to use biblatex-dw 1.3! Users might need to update
their data due to some changes in biblatex, especially
concerned with date specifications. Please follow the hints
for users given in biblatex’s RELEASE notes.
Further changes in this release:
- The options "isrn" and "issn" were dropped. Their
functionality can be achieved by the biblatex option
"isbn".
- BUGFIX: When using "idembibformat=dash", the @inreference
entries had a wrong punctuation inside the title. This is
now fixed.
- Option "pseudoauthor" changed: if set to true (and the
entry option "pseudoauthor" is used), the author of this
entry is printed. The new commands \bibleftpseudo and
\bibrightpseudo are used to enclose the author. These
commands are empty by default. If the global option
"pseudoauthor" is set to "false", the author of entries
with the entry option "pseudoauthor" are not printed at
all. The default value for the global option is "true"
(i.e. the behaviour is the same regardless of the entry
option "pseudoauthor").
- New command \locationdatepunct for the punctuation
between location and year/date. The default is \addspace.
- New command \locationpublisherpunct for the punctuation
between location and publisher. The default is
\addcolon\space.
- New command \publisherdatepunct for the punctuation
between publisher and year/date. The default is
\addcomma\space.
v1.2o [2010/02/14]
- BUGFIX: When using the options "xref=true" and
"useeditor=false", the editor was not printed in the
bibliography. This is now fixed. Also, some bugs
regarding the xref functionality in citations could be
fixed.
- BUGFIX: The editors in @incollection, @inproceedings and
@inreference entries were printed using the name format
"sortname" ("Lastname, Firstname") where it should have
been the name format "byeditor" ("Firstname Lastname").
This is now fixed.
- New option "omiteditor": If one uses "useeditor=false"
and "omiteditor=true", the editor in citations will be
omitted. The same applies to the xref functionality in
the bibliography. With "useeditor=true", this option has
no effect. The standard for this option is "false".
- The limitation regarding the combination of "xref=true",
"edbyidem=true" and "useeditor=false" is no longer valid.
That means, it is not necessary to have the editor in the
child entry as well in order to get an "idem" string.
- Extended the documentation.
v1.2n [2010/01/24]
- The option "edbeforetitle" was discarded. The same
functionality can be obtained by the option "useeditor".
In this context, some bugs could be resolved.
- New option "omitpages": if set to "true", the page range
of @article, @inbook, @incollection or @inproceedings
entries will be suppressed in full citations.
The standard value is "false".
- Extended the documentation regarding the xref
functionality.
v1.2m [2010/01/18]
- BUGFIX: Changed the default of \citerevsdnamedelim which
used to be a \slash. Now it is empty, because otherwise
it produced two slashes in some circumstances.
- BUGFIX: In footnote-dw with "xref=true", the reference to
the first entry did not work if the first citation of a
parent was cited via a child. This is now fixed.
- BUGFIX: In footnote-dw the punctuation of @collection
entries was wrong when using a prenote in conjunction
with "useeditor=false" or when there was no editor. This
is now fixed.
- The biblatex option "singletitle" can now be used both
with authortitle-dw and footnote-dw. Using this option, a
work"s title is only printed if there is not more than
one work by the author or editor.
- New entry option "pseudoauthor". If set to true, the
author is put in brackets. This is useful for e.g.
editions of works whose authors are not named, but are
known. See the documentation for details. The entry
option does only have effect if the global option
"pseudoauthor" is set to "true". The default value is
"false".
v1.2l [2009/10/19]
- BUGFIX: With footnote-dw, the references to the first
citations did not work, when refsections were used. This
is now fixed.
- BUGFIX: With xref=true, when no volume was present in an
@inreference entry as well as in its corresponding
@reference entry, the bibstring "vol." was printed. This
is now fixed.
- New option "shortjournal". If set to "true", the field
"shortjournal" is used instead of "journaltitle". This is
useful for journal abbreviations. The default is "false".
- New option "acronyms". If set to "true", shorthands (and
with "shortjournal=true" also the abbreviated journal
titles) are set with the command \mkbibacro, but only if
the entry option "acronym" is set to "true". The default
is "false".
- New option "pageref" (in footnote-dw only). If set to
"true", it adds the page to the footnote number pointing
to the full citation if it is located on a different
page. This option is the same as in the standard styles
"verbose-note" and "verbose-inote". The default is false.
- In footnote-dw, the pointer to the earlier citation is
suppressed if a shorthand exists and the option "citedas"
is true. Note that you can override the global option
"citedas" by setting the entry option "citedas".
v1.2k [2009/08/22]
Adjustments to biblatex version 0.8e. Note that from this
version on biblatex 0.8e is required, so you have to update
biblatex as well if you would like to use biblatex-dw 1.2k!
- Compound abbreviations (introduced in biblatex-dw 1.2i)
are now separated by the new biblatex command
"\addabthinspace"; this affects only the German
localization in strings like "hg. v."
- The improved concatenation of roles is used. See
biblatex’s release notes for details.
- The new auxiliary macros for ordinals are used. See
biblatex’s release notes for details.
BUGFIXES
- BUGFIX: The option "ibidpage" did not work with
footnote-dw. This is now fixed.
Changed Entry Types
- @inreference
Up to now, this entry type was an alias for
@incollection. From now on, this entry type can be used
for articles in encyclopedias or dictionaries. For
details on how @inreference entries differ from @
incollection entries, please consult the documentation.
The @reference type remains an alias for @collection.
New Options
- "isrn" and "pagetotal"
These options can take the values "true" and "false".
With these options you can decide whether you want to
have printed the corresponding fields or not.
The default for these options is "false".
- "edstringincitations"
If set to "true", the editor and translator strings are
shown in the citations (not only in the full citations).
The default is "true".
- "series=standard|afteryear"
If set to "afteryear", the series is printed after the
year. This affects the entry types @book, @inbook,
@collection, @incollection, @proceedings, @inproceedings
and @manual.
New Commands
- "seriespunct"
punctuation before the series (of a book etc.). This
punctuation is set inside the parentheses. You can set it
e.g. to "=\addspace" which is common in some fields. The
default is empty, i.e. the series is printed right after
the opening round bracket.
- "sernumstring"
punctuation between series (of a book etc.) and number.
The default is "\addspace". You can easily redefine it,
e.g.:
\renewcommand*{\sernumstring}{%
\addcomma\space\bibstring{volume}\addspace}
This would give "(Name of Series, vol. N)".
- "herenamepunct"
If the "herename" is used, the punctuation before the
herename is determined by "herenamepunct". The default is
\addcomma\space.
Localization Changes
- In German localization, the strings "withcommentator",
"withannotator" and "withintroduction" are shortened as
follows:
-> withcommentator: komm. v.
-> withannotator: erläut. v.
-> withintroduction: eingel. v.
The long versions stay the same as in standard biblatex.
v1.2j [2009/08/16]
- This is just a bugfix release. The only files changed are
footnote-dw.cbx, CHANGES, README and LIESMICH.
- BUGFIX: Since biblatex version 0.8e, footnote-dw gave an
error (Undefined control sequence: \blx@addperiod). This
is now fixed; thus, biblatex-dw (or rather footnote-dw)
should work with the biblatex versions 0.8e, 0.8f, 0.8g
and 0.8h, but it will not work with earlier versions.
v1.2i [2009/05/10]
- BUGFIX: When using option "usetranslator=true", the
translator string was not aware of the option
"editorstring". This is now fixed.
- Improved bibmacro "journal+issuetitle" which is now aware
of the option "edbeforetitle".
- The "typeeditor" field is now supported. It can take the
values "editor" and "compiler". This field determines the
editor string after the name of the editor(s). The
abbreviated forms are "ed." for "editor" and "comp." for
"compiler". In German, both strings are the same
("Herausgeber" or "Hrsg.").
- In English, the "idem" string is now declined (idem,
eadem, idem in singular; eidem, eaedem, eadem in plural)
and no longer abbreviated, even if abbreviate=true is
used.
- Improved the handling of "origfields=true".
- In German, the string "reprint" (Nachdruck) is now
abbreviated as "Ndr.", not as "Nachdr."
- Compound abbreviations are now separated by a thin space
rather than a normal one. At the moment, this affects
only the German localization in strings like "hg. v."
v1.2h [2009/03/29]
- BUGFIX: The "idem" functionality is now also aware of
page breaks. If the citation is the first on a page (or
double page in twoside mode), the "idem" is suppressed.
If you don’t want this behaviour, you can set the option
"pagetracker=false".
v1.2g [2009/03/20]
- Option "journalnumber" replaces "journumafteryear". The
option was enhanced and can now take the values
"standard", "afteryear" and "date". The value "standard"
is the same as the old journumafteryear=false,
"afteryear" is the same as the old journumafteryear=true.
The new value "date" assures that the date is printed,
even if the field issue is given (this is not the case in
the standard styles). Additionally, "journalnumber=date"
prints the number before the date, if the date (at least
year and month) is given, but it prints the number after
the year, if only the year is given (i.e. if the date is
not further specified). See the documentation for
details. The default is "journalnumber=standard".
- Improved german-dw.lbx.
- Adjusted the documentation for screen reading. A printer
friendly version can still be compiled from the source.
v1.2f [2009/02/15]
- Adjustments to biblatex version 0.8c. Note that from
this version on biblatex 0.8c is required, so you have to
update biblatex as well if you would like to use
biblatex-dw 1.2f!
-> The biblatex-dw option "idem" was replaced by the new
biblatex option "idemtracker". The standard setting is
"idemtracker=constrict". If you would like to switch
off the idem functionality, you can use
"idemtracker=false". For more information on the
"idemtracker" option see the biblatex manual.
- New options "doi", "eprint", "isbn" and "issn" which can
take the values "true" and "false". With these options
you can decide whether you want to have printed the
corresponding fields or not. The default for these
options is "false" (as was the standard before).
- New option "idemfont" which can take the values
"smallcaps", "italic", "bold" and "normal". The default
is none which means that the "idem" string is printed in
the font shape of "namefont".
- New option "ibidemfont" which can take the values
"smallcaps", "italic" and "bold". The default is none
which means that the "ibidem" string is printed in normal
font shape.
- New macro "jourvolstring" which introduces the volume of
an article entry. The default is a space (as it was the
case before), but you can adjust it to your needs, e.g.:
\renewcommand*{\jourvolstring}{\addspace vol\adddot\space}
- New macro "journumstring" which introduces the number in
article entries, if the option "journumafteryear" is set
to "true". The default for this macro is a comma,
followed by the bibstring "number" and a non-breakable
space. You can redefine it to your needs, e.g.:
\renewcommand*{\journumstring}{\addspace}
- If there is no volume in an article entry, but the month
field is set, the date is separated from the journal
title by a comma and a space, not only a space.
- Fixed some BUGS concerning the xref functionality.
- Reorganized some bibliography drivers.
- Enhanced the documentation.
v1.2e [2008/12/19]
- Adjustments to biblatex version 0.8b. Note that from
this version on biblatex 0.8b is required, so you have to
update biblatex as well if you would like to use
biblatex-dw 1.2e!
-> The new biblatex option "usetranslator" is supported.
- BUGFIX: The option "firstfullname" introduced in version
1.2d had a bug which is now fixed.
- BUGFIX: The "idem" functionality did not work with the
multicite commands. This is now fixed.
- New option "journumafteryear": If set to "true", the
"number" in article entries is printed after the year and
introduced by the bibstring "number". If set to "false",
the default behaviour is used, i.e. "Journaltitle
volume.number (year)". The default is "true".
-> If "journumafteryear" is set "false", the separator
between volume and number in @article entries is now
configurable with the new command "\jourvolnumsep".
The default is a dot (which is also the default in
biblatex).
- When the "volume" is missing, the parenthesis around the
year in @article entries is omitted.
- The multicite command \cites is now also always printed
as footnote in "footnote-dw".
- Some changes in the internal code.
- Extended the documentation and examples.
v1.2d [2008/12/07]
- BUGFIX: In footnote-dw, the punctuation after the author/
editor in all citations but the first one was always a
comma and not configurable by \citenamepunct. This is now
fixed.
- New option "firstfullname": when set to "true", the
commands \citeauthor and \textcite (with footnote-dw:
\citeauthor only) give the full name of authors/editors
when they have not been cited before, not only the last
name. The default is "false".
- Support for biblatex version 0.8a including
\MakeSentenceCase.
- Added lbx files with alternative strings for German and
additional strings for both German and English (these
strings were already included, but are now stored in the
language mapping files).
v1.2c [2008/11/15]
- New option "idembibformat": When using "idembib=true",
you can choose whether you want to have an "idem" string
in the bibliography (idembibformat=idem) or a dash
(idembibformat=dash), as is the standard setting in
biblatex. The standard is "idembibformat=idem".
- Option "idembib" changed: Now "false" means that
subsequent entries of the same author are given with full
names, not a dash (as was the behaviour up to now). The
standard is "idembib=true".
- Improved xref support: The child entry does not only scan
for the "volume" field of the parent entry, but prints
also "location" and "year", if they differ from the
parent entry.
v1.2b [2008/11/09]
- BUGFIX: With "xref=true", the first (full) citation did
not show the overall pages of @INBOOK, @INCOLLECTION and
@INPROCEEDINGS entries. This is now fixed.
- New option "nolocation". If set to "true", the location
and the publisher are omitted (even if you set
"nopublisher=false"). The default is "false", i.e. the
location is printed.
- The option "shorthandibid" can now also be used on a
per-entry basis.
- Improved xref support: If the "volume" field of a child
entry is set and the "volume" field of the corresponding
parent entry is not set, the volume of the child entry
will be printed immediately before the pages.
v1.2a [2008/10/19]
- Improved option "edsuper" which also outputs non-integer
editions (though not as superscript, but rather similar
to a note.)
- The field "origpublisher" (new in biblatex 0.8) is now
also supported.
- New option "origfields" which can take the values "true"
(standard) and "false". With this option, you can now
decide, whether you want to have the fields
"origlocation", "origpublisher" and "origyear" to be
printed or not.
-> New option "origfieldsformat=parens|brackets|punct".
The default is "punct" which means that the new
punctuation mark "\origfieldspunct" (default:
\addcomma\space) is used to introduce the reprint
phrase. If you choose "parens" or "brackets", the
reprint phrase is put in parentheses or brackets,
respectively, and the \origfieldspunct is ignored.
- New option "shorthandwidth". With this option you can set
the width of the label in the list of shorthands to any
length (e.g. "3em" or "40pt"). This is useful if you have
very long shorthands.
-> New punctuation command "\shorthandpunct" which is
only exerted when you use the option "shorthandwidth".
Then it is set to a colon. You can redefine this
punctuation command with \renewcommand.
-> New length "\shorthandsep" which is only exerted if
you use the option "shorthandwidth". The length
"\shorthandsep" defines the spacing after the label in
the list of shorthands.
- Improved package warnings.
v1.2 [2008/10/09]
- Adjustments to biblatex version 0.8. Note that from
version 1.2 on, biblatex-dw needs at least biblatex 0.8,
so you have to update biblatex as well if you would like
to use biblatex-dw 1.2!
-> The new biblatex option "firstinits" is supported.
-> The new macro \bibpagespunct is also supported.
- Added option "xref" which can be set to "true" or
"false". If you want to use the crossref functionality
(introduced in biblatex-dw version 1.1f), you now have to
set "xref=true". See the documentation for details.
- As biblatex 0.8 has changed the handling of the field
"edition", the option "edsuper" had to be adjusted. See
the documentation of biblatex-dw for details.
- Updated the documentation.
v1.1h [2008/09/24]
- BUGFIX: When using the options "edbeforetitle" and
"edbyidem", the idem funcionality did not work. This is
now fixed.
- Updated documentation (see especially, if you are using
the crossref functionality) and examples.
v1.1g [2008/09/05]
- The biblatex package option "mincrossrefs" is set to "1"
(instead of "2"). The reason is that otherwise entries
that are using the crossref functionality introduced in
biblatex-dw version 1.1f could be incomplete.
- If both "volumes" and "volume" are present, "volumes" is
now set before "volume".
v1.1f [2008/08/10]
- BUGFIX: Corrected wrong punctuation when using "idembib=
false" in conjunction with an editor.
- Added crossref functionality (using biblatex’s field
"xref"). This works for authortitle-dw as well as
footnote-dw. For further information please have a look
into the package documentation.
v1.1e [2008/06/13]
- BUGFIX: The option "edbeforetitle" caused a problem
when used together with the "idem" functionality
(which is the default). This is now fixed.
- Enhanced the "idem" functionality: If a citation with
shorthand precedes a citation of the same author or
editor without shorthand, the string "idem" is now
replaced by the author’s or editor’s name, since this
information cannot be gathered from the shorthand
citation and thus could mislead the reader.
v1.1d [2008/06/05]
- BUGFIX: The global option "oldauthor" which was
introduced in version 1.1c caused an erroneous behaviour
when used together with "idembib=true" (which is the
default). This is now fixed.
- New option "editorstring" which can take the values
"parens", "brackets" and "normal"; the default is
"parens". This option sets the string "editor"
(abbreviated "ed.") in parentheses or in brackets, or
just puts the string (with a preceding comma) after the
editor name.
- New option "edbeforetitle" which can take the values
"true" and "false"; the default is "false". When set to
"true", the editor in @INCOLLECTION and @INPROCEEDINGS
entries will be typeset before the booktitle ("... in:
Editor (ed.): Booktitle ...") rather than afterwards
("... in: Booktitle, ed. by Editor ...").
- Small correction in the terse version of the List of
Shorthands concerning the punctuation after authors/
editors.
- Added missing bibliography drivers for option "edbyidem".
v1.1c [2008/05/29]
- BUGFIX: With the option "idem=false", the author of a
first citation who was cited immediately before with
another work lacked the forename.
- BUGFIX: The option "edbyidem=false" produced a
superfluous "ed. by" string.
- BUGFIX: Small punctuation issue with repeated citations
and "herename".
- New option "namefont" which can take the values
"smallcaps", "italic" and "bold". The default is none,
i.e. authors and editors are set in normal font shape.
With "useprefix=true", this option also affects the
name prefix.
- New option "firstnamefont" which can take the values
"smallcaps", "italic" and "bold". This also affects the
name prefix (with "useprefix=false") and the name
affix.
- The option "oldauthor" is now also available as global
option in order to disable the feature. If you set
"oldauthor=false" globally, every entry option
"oldauthor=true" is ignored. Thus, you can set the
fontname for every author with global options,
independent of entry options.
v1.1b [2008/04/13]
- BUGFIX: When using \parencite with "footnote-dw",
additional parentheses (e.g. enclosing the string
"editor") were lost; they are now replaced by brackets.
- BUGFIX: In "footnote-dw", the normal \cite command
always produced a capital letter at the beginning. This
is fixed now.
- Fixed a small punctuation error in connection with
"herename".
- New command \titleaddonpunct for the punctuation before
titleaddon, booktitleaddon and maintitleaddon. The
default is a period now (not a comma, as before).
v1.1a [2008/02/09]
- BUGFIX: When using the commands "mancite" or
"citereset", the "idem" functionality was not reset.
This is now fixed.
- New option "edsuper". If set to "true", the edition is
printed as superscript number (not as ordinal number)
straight ahead of the year. The default is "false".
- New option "firstfull" (only in "authortitle-dw"). If
set to "true", the first citation is a fullcite. The
default is "false".
- Option "citedas" is now also available for
"authortitle-dw" and used when "firstfull" is set to
"true".
v1.1 [2008/02/01]
- BUGFIX: The "citedas" functionality did not work if the
first citation of an entry was introduced by "idem".
- New option "terselos" introduced for a terse version of
the list of shorthands (default is "true").
- New option "herename" introduced to specify if the term
\enquote{here} should prelude the pages of a fullcite
(or, with "footnote-dw", also the first citation of an
entry) which has a non-empty \texttt{pages}-field.
- New option "nopublisher" introduced to suppress the
publisher. The default value is "true", but if you want
to have the publisher printed, you now can set the
option "nopublisher=false".
- If the field "origlocation" is given, it will be set
together with "origyear", whereas "location" and "year"
are appended in parentheses, preluded by the bibstring
"reprint".
- The options "annotation" and "library" are now also
usable with the style "footnote-dw". The annotations
and library information are only printed in the
bibliography (if there is one), not in the citations or
in the list of shorthands.
- Updated documentation.
v1.01 [2008/01/20]
- BUGFIX: The "pagetracker" functionality did not work
properly with the style "footnote-dw"
- Excluded ISBN/ISSN and DOI also from entry types
booklet, inproceedings, manual, misc, periodical,
proceedings, and report
- Punctuation corrections for the same entry types
concerning the series+number
v1.0 [2008/01/14]
- Initial release
\ No newline at end of file +biblatex-dw 2012/06/28 v1.5
Copyright (c) 2008-2012 Dominik Waßenhoven <domwass(at)web.de>
Version history
---------------
v1.5 [2012/06/28]
This version of biblatex-dw was tested with biblatex 1.7.
- BUGFIX: The functionality of ibidpage=true was broken. This is now fixed.
- BUGFIX: With edbyidem=true (and xref=false), the first citation of an
@inbook entry where author and editor are the same, but the bookauthor
differs resulted in "ed. by idem", which is wrong. This is now fixed.
- BUGFIX: With edbyidem=false, the book author of @inbook entries
was not typeset in the appropriate format. This could lead to a
wrong output (e.g. "Lastname, Firstname" instead of "Firstname
Lastname"). This is now fixed.
- BUGFIX: With @inreference entries, the output could be
inconsistent with regard to the volume(s). This is now fixed.
- BUGFIX: Changes in font size for \annotationfont and \libraryfont
led to a wrong baselineskip. This is now fixed.
- BUGFIX: There was a small bug in @collection entries concerning the
punctuation after the labelname. This should be fixed now.
- BUGFIX: With shorthandinbib=true the \labelnamepunct was printed when there
was no author or editor present. This lead to superfluous punctuation and is
now fixed.
- BUGFIX: In some circumstances the final period of the bibliography items
(\finentry) was not printed. This is now fixed.
- In authortitle-dw, the \textcite command now also considers
the value of the firstfull option. That means, if a work
is cited for the first time via a \textcite command, the
result would be "<Name> (<full citation>)".
- New option "citeauthor" which can take the values "namefont", "namefontfoot"
and "normalfont". This option controls the name format for the \citeauthor
command. With "citeauthor=namefont" the same format as set by the option
"namefont" is used. This is the default behaviour. With "citeauthor=normalfont"
the normal font is always used for \citeauthor, regardless of the "namefont"
option. With "citeauthor=namefontfoot" the "namefont" format is used if the
\citeauthor command is inside a footnote, otherwise the normal font is used.
- The list of shorthands with option terselos=true is now even more terse:
the [main]subtitle and [main]titleaddon fields are now also omitted.
v1.4 [2011/11/20]
This version of biblatex-dw was tested with biblatex 1.7 and
requires at least version 1.6 of biblatex.
- BUGFIX: With @review entries cited by \fullcite or
\footfullcite the reviewed work was not printed in full.
This is now fixed.
- BUGFIX: With "shorthandinbib=true" and "terselos=false",
the shorthand was printed twice in the list of
shorthands. This is now fixed.
- The \smartcite commands introduced by biblatex 1.2 are
now supported.
- The \textcite and \textcites commands are now also supported
by footnote-dw.
- New command \textcitesdelim: delimiter between author names
when using \textcites. The default is:
\addspace\bibstring{and}\space
- New option "seriesformat" which can take the values
"standard" and "parens". If set to "parens", the series
of a book etc. will be printed in parentheses, otherwise
without (as is the biblatex standard behaviour). The
default value for this option is "parens" (as was the
behaviour in earlier biblatex-dw versions).
- New option "editorstringfont" which can take the values
"normal" and "namefont". With "normal", the normal font
is used, with "namefont", the setting for the option
"namefont" is also used for the editor string (and
translator string etc.). The default value for this
option is "normal".
- New option "editionstring": If set to "true", the
bibliography string "edition" will be added to the
"edition" field, even if it is not an integer. Thus,
you can type, e.g.,
edition = {2., aktualisierte}
in your bib file and you will get "2., aktualisierte
Aufl." (or, with option abbreviate=false: "2.,
aktualisierte Auflage"). "editionstring=false" will give
biblatex’s default behaviour. The default for this option
is "false".
- New entry option "oldbookauthor" which is equivalent to
"oldauthor" but for the bookauthor (this is useful for
@inbook entries representing, e.g., an introduction to an
edition of a work by an author that should not be typeset
in the usual font for last names). This option can be set
on a per entry basis and can be disabled with the global
option "oldauthor=false".
- Improved options "namefont", "firstnamefont", "idemfont"
and "ibidemfont" which are now aware of the setting of
the biblatex option "punctfont".
- Small bugfix for the xref functionality.
v1.3c [2011/02/06]
This version of biblatex-dw needs biblatex 1.1a. Please note
that you have to update biblatex as well if you would like
to use biblatex-dw 1.3c!
- BUGFIX: Under some circumstances, an error occurred
(command \cbx@tempa could not be found). This should be
fixed now.
- BUGFIX: Some of the German translations were broken due
to a change of internal commands in biblatex. This is now
fixed.
- The entry type @review is now supported. You can
specify a reviewed work via the xref field. See the
documentation for details.
- Some internal changes concerning \DeclareFieldFormat
directives.
v1.3b [2010/11/21]
This version of biblatex-dw was tested against biblatex 1.0,
but it should also work with versions from biblatex 0.9d.
The following changes were made to biblatex-dw:
- BUGFIX: Using pagetotal=false and citepages=separate, the
herename was printed as soon as the pagetotal field was
present (although the pagetotal field itself was not
printed). This is now fixed, and the citepages option
pays attention to the pagetotal option.
- In order to match as closely as possible to biblatex
itself, the \citenamepunct command was renamed to
\nametitledelim. For compatibility reasons with earlier
versions of biblatex-dw, the \citenamepunct was kept.
Thus, it does not matter if you redefine \nametitledelim
or \citenamepunct, the effect will be the same; but note
that the \citenamepunct may be dropped in later versions
of biblatex-dw.
- In full citations \nametitledelim is used instead of
\labelnamepunct.
- Improvements regarding idem functionality in combination
with xref=true.
- Improved the documentation.
v1.3a [2010/09/21]
This version of biblatex-dw supports biblatex 0.9d. Please
note that you have to update biblatex at least to version
0.9b if you would like to use biblatex-dw 1.3a! You will
also need to install the package logreq which is a new
requirement since biblatex 0.9b. Users might also need to
update their data due to some changes in biblatex 0.9a and
biblatex 0.9b. Please follow the hints for users given in
biblatex’s RELEASE notes for both of these versions.
The following changes were made to biblatex-dw:
- Option "omitpages" was renamed to "citepages" and
enhanced. As in the verbose standard styles, you can now
choose between "permit", "omit", "suppress" and
"separate". Other as in the biblatex styles, the standard
for this option in biblatex-dw is "separate".
- Option "herename" dropped. The same functionality can now
be achieved by using "citepages=separate". Note that the
bibliography string "herename" was also dropped,
"thiscite" is used instead.
- New option "shorthandinbib": if set to "true", the
shorthand of each entry will be typeset in the
bibliography before each item. The shorthand will be set
in brackets, separated by a space. You can customize this
behaviour by adjusting the following commands:
\DeclareFieldFormat{shorthandinbib}{\mkbibbrackets{#1}}
\newcommand*{\shorthandinbibpunct}{\addspace}
The default for "shorthandinbib" is "false".
- BUGFIX: The shorthandpunct could not be redefined by a
simple \renewcommand, but only as an argument of
\AtBeginDocument. This is now fixed, and a simple
\renewcommand is sufficient.
- BUGFIX: The shorthandpunct was also printed, when the
option "shorthandwidth" was not in use (this had only
effect, when the shorthandpunct was redefined). This is
now fixed.
- BUGFIX: When using authortitle-dw with "firstfull=true",
a \parencite had an erroneous space for the first
citation without a postnote. This is now fixed.
- BUGFIX: The new editorial roles introduced in biblatex
0.9 were not fully supported. This is now fixed.
- BUGFIX: The option "firstfullname" did not work with
biblatex’s option "uniquename". This is now fixed.
- BUGFIX: When using hyperref, some links to the
bibliography were broken. This should now be fixed.
- BUGFIX: In @inbook entries the punctuation after a book
author was not the \labelnamepunct. This is now fixed.
v1.3 [2010/03/11]
This version of biblatex-dw supports biblatex 0.9. Please
note that you have to update biblatex as well if you would
like to use biblatex-dw 1.3! Users might need to update
their data due to some changes in biblatex, especially
concerned with date specifications. Please follow the hints
for users given in biblatex’s RELEASE notes.
Further changes in this release:
- The options "isrn" and "issn" were dropped. Their
functionality can be achieved by the biblatex option
"isbn".
- BUGFIX: When using "idembibformat=dash", the @inreference
entries had a wrong punctuation inside the title. This is
now fixed.
- Option "pseudoauthor" changed: if set to true (and the
entry option "pseudoauthor" is used), the author of this
entry is printed. The new commands \bibleftpseudo and
\bibrightpseudo are used to enclose the author. These
commands are empty by default. If the global option
"pseudoauthor" is set to "false", the author of entries
with the entry option "pseudoauthor" are not printed at
all. The default value for the global option is "true"
(i.e. the behaviour is the same regardless of the entry
option "pseudoauthor").
- New command \locationdatepunct for the punctuation
between location and year/date. The default is \addspace.
- New command \locationpublisherpunct for the punctuation
between location and publisher. The default is
\addcolon\space.
- New command \publisherdatepunct for the punctuation
between publisher and year/date. The default is
\addcomma\space.
v1.2o [2010/02/14]
- BUGFIX: When using the options "xref=true" and
"useeditor=false", the editor was not printed in the
bibliography. This is now fixed. Also, some bugs
regarding the xref functionality in citations could be
fixed.
- BUGFIX: The editors in @incollection, @inproceedings and
@inreference entries were printed using the name format
"sortname" ("Lastname, Firstname") where it should have
been the name format "byeditor" ("Firstname Lastname").
This is now fixed.
- New option "omiteditor": If one uses "useeditor=false"
and "omiteditor=true", the editor in citations will be
omitted. The same applies to the xref functionality in
the bibliography. With "useeditor=true", this option has
no effect. The standard for this option is "false".
- The limitation regarding the combination of "xref=true",
"edbyidem=true" and "useeditor=false" is no longer valid.
That means, it is not necessary to have the editor in the
child entry as well in order to get an "idem" string.
- Extended the documentation.
v1.2n [2010/01/24]
- The option "edbeforetitle" was discarded. The same
functionality can be obtained by the option "useeditor".
In this context, some bugs could be resolved.
- New option "omitpages": if set to "true", the page range
of @article, @inbook, @incollection or @inproceedings
entries will be suppressed in full citations.
The standard value is "false".
- Extended the documentation regarding the xref
functionality.
v1.2m [2010/01/18]
- BUGFIX: Changed the default of \citerevsdnamedelim which
used to be a \slash. Now it is empty, because otherwise
it produced two slashes in some circumstances.
- BUGFIX: In footnote-dw with "xref=true", the reference to
the first entry did not work if the first citation of a
parent was cited via a child. This is now fixed.
- BUGFIX: In footnote-dw the punctuation of @collection
entries was wrong when using a prenote in conjunction
with "useeditor=false" or when there was no editor. This
is now fixed.
- The biblatex option "singletitle" can now be used both
with authortitle-dw and footnote-dw. Using this option, a
work"s title is only printed if there is not more than
one work by the author or editor.
- New entry option "pseudoauthor". If set to true, the
author is put in brackets. This is useful for e.g.
editions of works whose authors are not named, but are
known. See the documentation for details. The entry
option does only have effect if the global option
"pseudoauthor" is set to "true". The default value is
"false".
v1.2l [2009/10/19]
- BUGFIX: With footnote-dw, the references to the first
citations did not work, when refsections were used. This
is now fixed.
- BUGFIX: With xref=true, when no volume was present in an
@inreference entry as well as in its corresponding
@reference entry, the bibstring "vol." was printed. This
is now fixed.
- New option "shortjournal". If set to "true", the field
"shortjournal" is used instead of "journaltitle". This is
useful for journal abbreviations. The default is "false".
- New option "acronyms". If set to "true", shorthands (and
with "shortjournal=true" also the abbreviated journal
titles) are set with the command \mkbibacro, but only if
the entry option "acronym" is set to "true". The default
is "false".
- New option "pageref" (in footnote-dw only). If set to
"true", it adds the page to the footnote number pointing
to the full citation if it is located on a different
page. This option is the same as in the standard styles
"verbose-note" and "verbose-inote". The default is false.
- In footnote-dw, the pointer to the earlier citation is
suppressed if a shorthand exists and the option "citedas"
is true. Note that you can override the global option
"citedas" by setting the entry option "citedas".
v1.2k [2009/08/22]
Adjustments to biblatex version 0.8e. Note that from this
version on biblatex 0.8e is required, so you have to update
biblatex as well if you would like to use biblatex-dw 1.2k!
- Compound abbreviations (introduced in biblatex-dw 1.2i)
are now separated by the new biblatex command
"\addabthinspace"; this affects only the German
localization in strings like "hg. v."
- The improved concatenation of roles is used. See
biblatex’s release notes for details.
- The new auxiliary macros for ordinals are used. See
biblatex’s release notes for details.
BUGFIXES
- BUGFIX: The option "ibidpage" did not work with
footnote-dw. This is now fixed.
Changed Entry Types
- @inreference
Up to now, this entry type was an alias for
@incollection. From now on, this entry type can be used
for articles in encyclopedias or dictionaries. For
details on how @inreference entries differ from @
incollection entries, please consult the documentation.
The @reference type remains an alias for @collection.
New Options
- "isrn" and "pagetotal"
These options can take the values "true" and "false".
With these options you can decide whether you want to
have printed the corresponding fields or not.
The default for these options is "false".
- "edstringincitations"
If set to "true", the editor and translator strings are
shown in the citations (not only in the full citations).
The default is "true".
- "series=standard|afteryear"
If set to "afteryear", the series is printed after the
year. This affects the entry types @book, @inbook,
@collection, @incollection, @proceedings, @inproceedings
and @manual.
New Commands
- "seriespunct"
punctuation before the series (of a book etc.). This
punctuation is set inside the parentheses. You can set it
e.g. to "=\addspace" which is common in some fields. The
default is empty, i.e. the series is printed right after
the opening round bracket.
- "sernumstring"
punctuation between series (of a book etc.) and number.
The default is "\addspace". You can easily redefine it,
e.g.:
\renewcommand*{\sernumstring}{%
\addcomma\space\bibstring{volume}\addspace}
This would give "(Name of Series, vol. N)".
- "herenamepunct"
If the "herename" is used, the punctuation before the
herename is determined by "herenamepunct". The default is
\addcomma\space.
Localization Changes
- In German localization, the strings "withcommentator",
"withannotator" and "withintroduction" are shortened as
follows:
-> withcommentator: komm. v.
-> withannotator: erläut. v.
-> withintroduction: eingel. v.
The long versions stay the same as in standard biblatex.
v1.2j [2009/08/16]
- This is just a bugfix release. The only files changed are
footnote-dw.cbx, CHANGES, README and LIESMICH.
- BUGFIX: Since biblatex version 0.8e, footnote-dw gave an
error (Undefined control sequence: \blx@addperiod). This
is now fixed; thus, biblatex-dw (or rather footnote-dw)
should work with the biblatex versions 0.8e, 0.8f, 0.8g
and 0.8h, but it will not work with earlier versions.
v1.2i [2009/05/10]
- BUGFIX: When using option "usetranslator=true", the
translator string was not aware of the option
"editorstring". This is now fixed.
- Improved bibmacro "journal+issuetitle" which is now aware
of the option "edbeforetitle".
- The "typeeditor" field is now supported. It can take the
values "editor" and "compiler". This field determines the
editor string after the name of the editor(s). The
abbreviated forms are "ed." for "editor" and "comp." for
"compiler". In German, both strings are the same
("Herausgeber" or "Hrsg.").
- In English, the "idem" string is now declined (idem,
eadem, idem in singular; eidem, eaedem, eadem in plural)
and no longer abbreviated, even if abbreviate=true is
used.
- Improved the handling of "origfields=true".
- In German, the string "reprint" (Nachdruck) is now
abbreviated as "Ndr.", not as "Nachdr."
- Compound abbreviations are now separated by a thin space
rather than a normal one. At the moment, this affects
only the German localization in strings like "hg. v."
v1.2h [2009/03/29]
- BUGFIX: The "idem" functionality is now also aware of
page breaks. If the citation is the first on a page (or
double page in twoside mode), the "idem" is suppressed.
If you don’t want this behaviour, you can set the option
"pagetracker=false".
v1.2g [2009/03/20]
- Option "journalnumber" replaces "journumafteryear". The
option was enhanced and can now take the values
"standard", "afteryear" and "date". The value "standard"
is the same as the old journumafteryear=false,
"afteryear" is the same as the old journumafteryear=true.
The new value "date" assures that the date is printed,
even if the field issue is given (this is not the case in
the standard styles). Additionally, "journalnumber=date"
prints the number before the date, if the date (at least
year and month) is given, but it prints the number after
the year, if only the year is given (i.e. if the date is
not further specified). See the documentation for
details. The default is "journalnumber=standard".
- Improved german-dw.lbx.
- Adjusted the documentation for screen reading. A printer
friendly version can still be compiled from the source.
v1.2f [2009/02/15]
- Adjustments to biblatex version 0.8c. Note that from
this version on biblatex 0.8c is required, so you have to
update biblatex as well if you would like to use
biblatex-dw 1.2f!
-> The biblatex-dw option "idem" was replaced by the new
biblatex option "idemtracker". The standard setting is
"idemtracker=constrict". If you would like to switch
off the idem functionality, you can use
"idemtracker=false". For more information on the
"idemtracker" option see the biblatex manual.
- New options "doi", "eprint", "isbn" and "issn" which can
take the values "true" and "false". With these options
you can decide whether you want to have printed the
corresponding fields or not. The default for these
options is "false" (as was the standard before).
- New option "idemfont" which can take the values
"smallcaps", "italic", "bold" and "normal". The default
is none which means that the "idem" string is printed in
the font shape of "namefont".
- New option "ibidemfont" which can take the values
"smallcaps", "italic" and "bold". The default is none
which means that the "ibidem" string is printed in normal
font shape.
- New macro "jourvolstring" which introduces the volume of
an article entry. The default is a space (as it was the
case before), but you can adjust it to your needs, e.g.:
\renewcommand*{\jourvolstring}{\addspace vol\adddot\space}
- New macro "journumstring" which introduces the number in
article entries, if the option "journumafteryear" is set
to "true". The default for this macro is a comma,
followed by the bibstring "number" and a non-breakable
space. You can redefine it to your needs, e.g.:
\renewcommand*{\journumstring}{\addspace}
- If there is no volume in an article entry, but the month
field is set, the date is separated from the journal
title by a comma and a space, not only a space.
- Fixed some BUGS concerning the xref functionality.
- Reorganized some bibliography drivers.
- Enhanced the documentation.
v1.2e [2008/12/19]
- Adjustments to biblatex version 0.8b. Note that from
this version on biblatex 0.8b is required, so you have to
update biblatex as well if you would like to use
biblatex-dw 1.2e!
-> The new biblatex option "usetranslator" is supported.
- BUGFIX: The option "firstfullname" introduced in version
1.2d had a bug which is now fixed.
- BUGFIX: The "idem" functionality did not work with the
multicite commands. This is now fixed.
- New option "journumafteryear": If set to "true", the
"number" in article entries is printed after the year and
introduced by the bibstring "number". If set to "false",
the default behaviour is used, i.e. "Journaltitle
volume.number (year)". The default is "true".
-> If "journumafteryear" is set "false", the separator
between volume and number in @article entries is now
configurable with the new command "\jourvolnumsep".
The default is a dot (which is also the default in
biblatex).
- When the "volume" is missing, the parenthesis around the
year in @article entries is omitted.
- The multicite command \cites is now also always printed
as footnote in "footnote-dw".
- Some changes in the internal code.
- Extended the documentation and examples.
v1.2d [2008/12/07]
- BUGFIX: In footnote-dw, the punctuation after the author/
editor in all citations but the first one was always a
comma and not configurable by \citenamepunct. This is now
fixed.
- New option "firstfullname": when set to "true", the
commands \citeauthor and \textcite (with footnote-dw:
\citeauthor only) give the full name of authors/editors
when they have not been cited before, not only the last
name. The default is "false".
- Support for biblatex version 0.8a including
\MakeSentenceCase.
- Added lbx files with alternative strings for German and
additional strings for both German and English (these
strings were already included, but are now stored in the
language mapping files).
v1.2c [2008/11/15]
- New option "idembibformat": When using "idembib=true",
you can choose whether you want to have an "idem" string
in the bibliography (idembibformat=idem) or a dash
(idembibformat=dash), as is the standard setting in
biblatex. The standard is "idembibformat=idem".
- Option "idembib" changed: Now "false" means that
subsequent entries of the same author are given with full
names, not a dash (as was the behaviour up to now). The
standard is "idembib=true".
- Improved xref support: The child entry does not only scan
for the "volume" field of the parent entry, but prints
also "location" and "year", if they differ from the
parent entry.
v1.2b [2008/11/09]
- BUGFIX: With "xref=true", the first (full) citation did
not show the overall pages of @INBOOK, @INCOLLECTION and
@INPROCEEDINGS entries. This is now fixed.
- New option "nolocation". If set to "true", the location
and the publisher are omitted (even if you set
"nopublisher=false"). The default is "false", i.e. the
location is printed.
- The option "shorthandibid" can now also be used on a
per-entry basis.
- Improved xref support: If the "volume" field of a child
entry is set and the "volume" field of the corresponding
parent entry is not set, the volume of the child entry
will be printed immediately before the pages.
v1.2a [2008/10/19]
- Improved option "edsuper" which also outputs non-integer
editions (though not as superscript, but rather similar
to a note.)
- The field "origpublisher" (new in biblatex 0.8) is now
also supported.
- New option "origfields" which can take the values "true"
(standard) and "false". With this option, you can now
decide, whether you want to have the fields
"origlocation", "origpublisher" and "origyear" to be
printed or not.
-> New option "origfieldsformat=parens|brackets|punct".
The default is "punct" which means that the new
punctuation mark "\origfieldspunct" (default:
\addcomma\space) is used to introduce the reprint
phrase. If you choose "parens" or "brackets", the
reprint phrase is put in parentheses or brackets,
respectively, and the \origfieldspunct is ignored.
- New option "shorthandwidth". With this option you can set
the width of the label in the list of shorthands to any
length (e.g. "3em" or "40pt"). This is useful if you have
very long shorthands.
-> New punctuation command "\shorthandpunct" which is
only exerted when you use the option "shorthandwidth".
Then it is set to a colon. You can redefine this
punctuation command with \renewcommand.
-> New length "\shorthandsep" which is only exerted if
you use the option "shorthandwidth". The length
"\shorthandsep" defines the spacing after the label in
the list of shorthands.
- Improved package warnings.
v1.2 [2008/10/09]
- Adjustments to biblatex version 0.8. Note that from
version 1.2 on, biblatex-dw needs at least biblatex 0.8,
so you have to update biblatex as well if you would like
to use biblatex-dw 1.2!
-> The new biblatex option "firstinits" is supported.
-> The new macro \bibpagespunct is also supported.
- Added option "xref" which can be set to "true" or
"false". If you want to use the crossref functionality
(introduced in biblatex-dw version 1.1f), you now have to
set "xref=true". See the documentation for details.
- As biblatex 0.8 has changed the handling of the field
"edition", the option "edsuper" had to be adjusted. See
the documentation of biblatex-dw for details.
- Updated the documentation.
v1.1h [2008/09/24]
- BUGFIX: When using the options "edbeforetitle" and
"edbyidem", the idem funcionality did not work. This is
now fixed.
- Updated documentation (see especially, if you are using
the crossref functionality) and examples.
v1.1g [2008/09/05]
- The biblatex package option "mincrossrefs" is set to "1"
(instead of "2"). The reason is that otherwise entries
that are using the crossref functionality introduced in
biblatex-dw version 1.1f could be incomplete.
- If both "volumes" and "volume" are present, "volumes" is
now set before "volume".
v1.1f [2008/08/10]
- BUGFIX: Corrected wrong punctuation when using "idembib=
false" in conjunction with an editor.
- Added crossref functionality (using biblatex’s field
"xref"). This works for authortitle-dw as well as
footnote-dw. For further information please have a look
into the package documentation.
v1.1e [2008/06/13]
- BUGFIX: The option "edbeforetitle" caused a problem
when used together with the "idem" functionality
(which is the default). This is now fixed.
- Enhanced the "idem" functionality: If a citation with
shorthand precedes a citation of the same author or
editor without shorthand, the string "idem" is now
replaced by the author’s or editor’s name, since this
information cannot be gathered from the shorthand
citation and thus could mislead the reader.
v1.1d [2008/06/05]
- BUGFIX: The global option "oldauthor" which was
introduced in version 1.1c caused an erroneous behaviour
when used together with "idembib=true" (which is the
default). This is now fixed.
- New option "editorstring" which can take the values
"parens", "brackets" and "normal"; the default is
"parens". This option sets the string "editor"
(abbreviated "ed.") in parentheses or in brackets, or
just puts the string (with a preceding comma) after the
editor name.
- New option "edbeforetitle" which can take the values
"true" and "false"; the default is "false". When set to
"true", the editor in @INCOLLECTION and @INPROCEEDINGS
entries will be typeset before the booktitle ("... in:
Editor (ed.): Booktitle ...") rather than afterwards
("... in: Booktitle, ed. by Editor ...").
- Small correction in the terse version of the List of
Shorthands concerning the punctuation after authors/
editors.
- Added missing bibliography drivers for option "edbyidem".
v1.1c [2008/05/29]
- BUGFIX: With the option "idem=false", the author of a
first citation who was cited immediately before with
another work lacked the forename.
- BUGFIX: The option "edbyidem=false" produced a
superfluous "ed. by" string.
- BUGFIX: Small punctuation issue with repeated citations
and "herename".
- New option "namefont" which can take the values
"smallcaps", "italic" and "bold". The default is none,
i.e. authors and editors are set in normal font shape.
With "useprefix=true", this option also affects the
name prefix.
- New option "firstnamefont" which can take the values
"smallcaps", "italic" and "bold". This also affects the
name prefix (with "useprefix=false") and the name
affix.
- The option "oldauthor" is now also available as global
option in order to disable the feature. If you set
"oldauthor=false" globally, every entry option
"oldauthor=true" is ignored. Thus, you can set the
fontname for every author with global options,
independent of entry options.
v1.1b [2008/04/13]
- BUGFIX: When using \parencite with "footnote-dw",
additional parentheses (e.g. enclosing the string
"editor") were lost; they are now replaced by brackets.
- BUGFIX: In "footnote-dw", the normal \cite command
always produced a capital letter at the beginning. This
is fixed now.
- Fixed a small punctuation error in connection with
"herename".
- New command \titleaddonpunct for the punctuation before
titleaddon, booktitleaddon and maintitleaddon. The
default is a period now (not a comma, as before).
v1.1a [2008/02/09]
- BUGFIX: When using the commands "mancite" or
"citereset", the "idem" functionality was not reset.
This is now fixed.
- New option "edsuper". If set to "true", the edition is
printed as superscript number (not as ordinal number)
straight ahead of the year. The default is "false".
- New option "firstfull" (only in "authortitle-dw"). If
set to "true", the first citation is a fullcite. The
default is "false".
- Option "citedas" is now also available for
"authortitle-dw" and used when "firstfull" is set to
"true".
v1.1 [2008/02/01]
- BUGFIX: The "citedas" functionality did not work if the
first citation of an entry was introduced by "idem".
- New option "terselos" introduced for a terse version of
the list of shorthands (default is "true").
- New option "herename" introduced to specify if the term
\enquote{here} should prelude the pages of a fullcite
(or, with "footnote-dw", also the first citation of an
entry) which has a non-empty \texttt{pages}-field.
- New option "nopublisher" introduced to suppress the
publisher. The default value is "true", but if you want
to have the publisher printed, you now can set the
option "nopublisher=false".
- If the field "origlocation" is given, it will be set
together with "origyear", whereas "location" and "year"
are appended in parentheses, preluded by the bibstring
"reprint".
- The options "annotation" and "library" are now also
usable with the style "footnote-dw". The annotations
and library information are only printed in the
bibliography (if there is one), not in the citations or
in the list of shorthands.
- Updated documentation.
v1.01 [2008/01/20]
- BUGFIX: The "pagetracker" functionality did not work
properly with the style "footnote-dw"
- Excluded ISBN/ISSN and DOI also from entry types
booklet, inproceedings, manual, misc, periodical,
proceedings, and report
- Punctuation corrections for the same entry types
concerning the series+number
v1.0 [2008/01/14]
- Initial release
\ No newline at end of file diff --git a/Master/texmf-dist/doc/latex/biblatex-dw/LIESMICH b/Master/texmf-dist/doc/latex/biblatex-dw/LIESMICH index ea93c674820..dd1b6e5beeb 100644 --- a/Master/texmf-dist/doc/latex/biblatex-dw/LIESMICH +++ b/Master/texmf-dist/doc/latex/biblatex-dw/LIESMICH @@ -1,5 +1,5 @@ -biblatex-dw 2011/11/20 v1.4
-Copyright (c) 2008-2011 Dominik Waßenhoven <domwass(at)web.de>
+biblatex-dw 2012/06/28 v1.5
+Copyright (c) 2008-2012 Dominik Waßenhoven <domwass(at)web.de>
************************************************************
@@ -25,7 +25,11 @@ Inhalt der Datei LIESMICH biblatex auf und kann nicht ohne biblatex benutzt werden!
Anregungen und Verbesserungsvorschläge sind jederzeit
- willkommen.
+ willkommen. Wenn Sie einen Fehler finden, erstellen Sie
+ bitte einen Bug-Report (am besten inklusive Minimalbeispiel)
+ auf http://sourceforge.net/p/biblatex-dw/tickets/milestone/Bugs.
+ FÜr Verbesserungsvorschläge verwenden Sie ein Feature-Request unter
+ http://sourceforge.net/p/biblatex-dw/tickets/milestone/Features.
2. Installationshinweise
diff --git a/Master/texmf-dist/doc/latex/biblatex-dw/README b/Master/texmf-dist/doc/latex/biblatex-dw/README index 4b724e45f95..b7c56109d19 100644 --- a/Master/texmf-dist/doc/latex/biblatex-dw/README +++ b/Master/texmf-dist/doc/latex/biblatex-dw/README @@ -1,5 +1,5 @@ -biblatex-dw 2011/11/20 v1.4 -Copyright (c) 2008-2011 Dominik Waßenhoven <domwass(at)web.de> +biblatex-dw 2012/06/28 v1.5 +Copyright (c) 2008-2012 Dominik Waßenhoven <domwass(at)web.de> ************************************************************ @@ -24,7 +24,12 @@ Contents of README on biblatex and cannot be used without it! Any suggestions concerning this package are highly - appreciated. + appreciated. If you should find an error, please file a + bug report at: + http://sourceforge.net/p/biblatex-dw/tickets/milestone/Bugs + If you think that a feature is missing, please file a feature + request at: + http://sourceforge.net/p/biblatex-dw/tickets/milestone/Features 2. Installation diff --git a/Master/texmf-dist/doc/latex/biblatex-dw/biblatex-dw-preamble.tex b/Master/texmf-dist/doc/latex/biblatex-dw/biblatex-dw-preamble.tex index 195d9295ec0..1a501fbadd5 100644 --- a/Master/texmf-dist/doc/latex/biblatex-dw/biblatex-dw-preamble.tex +++ b/Master/texmf-dist/doc/latex/biblatex-dw/biblatex-dw-preamble.tex @@ -1,14 +1,16 @@ +% !TEX encoding = IsoLatin % biblatex-dw -% Copyright (c) Dominik Waßenhoven <domwass(at)web.de>, 2011 +% Copyright (c) Dominik Waßenhoven <domwass(at)web.de>, 2012 % % This file is the preamble for the documentation of % biblatex-dw (both the English and the German version) %%%%% biblatex-dw Version %%%%% version of biblatex-dw %%%%% -\newcommand{\biblatexdwversion}{1.4} -\newcommand{\biblatexdwdate}{\printdate{2011-11-20}} -\newcommand{\mindestanforderung}{1.6}% minimum biblatex version +\newcommand{\biblatexdwversion}{1.5} +\newcommand{\biblatexdwdate}{\printdate{2012-06-28}} +\newcommand{\mindestanforderung}{1.7}% minimum biblatex version \newcommand{\testversion}{1.7}% tested biblatex version +\newcommand{\biberversion}{0.9.9}% tested biber version \newcommand{\screenversion}{} \newcommand{\TOC}{} \newcommand{\lizenz}{} @@ -162,6 +164,21 @@ \fi \egroup } +\newcommand{\tmp@beschreibungcmd}{} +\DeclareRobustCommand\beschreibungcmd[2][]{% + \bgroup + \def\tmp@beschreibungcmd{#1}% + \ifx\tmp@beschreibungcmd\@empty + % leerer Fall + \label{#2}% + \marginpar{\footnotesize\sffamily\textcolor{dkblue}{\textbackslash #2}}% + \else + % unleerer Fall + \label{#1}% + \marginpar{\footnotesize\sffamily\textcolor{dkblue}{\textbackslash #2}}% + \fi + \egroup +} \makeatother \newcommand{\bl}{\paket{biblatex}} @@ -181,6 +198,8 @@ \newcommand{\optnur}[2][]{\item[\option{#2}]\emph{#1}\hfill% {\footnotesize\sffamily\seite{\pageref{#2}}\\}} \newcommand{\befehl}[3]{\item[\option{\cmd{#1}}]\texttt{#2}\\{#3}} +\newcommand{\befehlmitverweis}[2]{\item[\option{\cmd{#1}}]~\hfill% + {\footnotesize\sffamily\seite{\pageref{#1}}}\\{#2}} \newcommand{\befehlleer}[2]{\item[\option{\cmd{#1}}]\emph{(\iflanguage{english}{empty}{leer})}\\{#2}} \newcommand{\biblstring}[3]{% \item[\option{#1}]\texttt{#2}\hspace{0.4em}\textbullet\hspace{0.4em}\texttt{#3}} @@ -204,8 +223,8 @@ \newcommand{\Testversion}{% \iflanguage{english}% - {~and was tested with version~\testversion{} of \bl{}}% - {~und wurde mit Version~\testversion{} von \bl{} getestet}} + {~and was tested with \bl{} version~\testversion{} and \paket{biber} version~\biberversion{}}% + {~und wurde mit Version~\testversion{} von \bl{} sowie Version~\biberversion{} von \paket{biber} getestet}} %%%%% Titelei %%%%% title page %%%%% \author{Dominik Waßenhoven} diff --git a/Master/texmf-dist/doc/latex/biblatex-dw/biblatex-dw-print.tex b/Master/texmf-dist/doc/latex/biblatex-dw/biblatex-dw-print.tex index 3e8f53fb67c..f0b73c00e87 100644 --- a/Master/texmf-dist/doc/latex/biblatex-dw/biblatex-dw-print.tex +++ b/Master/texmf-dist/doc/latex/biblatex-dw/biblatex-dw-print.tex @@ -1,3 +1,4 @@ +% !TEX encoding = IsoLatin % biblatex-dw % Copyright (c) Dominik Waßenhoven <domwass(at)web.de>, 2011 % diff --git a/Master/texmf-dist/doc/latex/biblatex-dw/biblatex-dw-screen.tex b/Master/texmf-dist/doc/latex/biblatex-dw/biblatex-dw-screen.tex index 37170a95173..5a0811a5b42 100644 --- a/Master/texmf-dist/doc/latex/biblatex-dw/biblatex-dw-screen.tex +++ b/Master/texmf-dist/doc/latex/biblatex-dw/biblatex-dw-screen.tex @@ -1,3 +1,4 @@ +% !TEX encoding = IsoLatin % biblatex-dw % Copyright (c) Dominik Waßenhoven <domwass(at)web.de>, 2011 % diff --git a/Master/texmf-dist/doc/latex/biblatex-dw/biblatex-dw.pdf b/Master/texmf-dist/doc/latex/biblatex-dw/biblatex-dw.pdf Binary files differindex e7a4a26dc02..4c1d96f4922 100644 --- a/Master/texmf-dist/doc/latex/biblatex-dw/biblatex-dw.pdf +++ b/Master/texmf-dist/doc/latex/biblatex-dw/biblatex-dw.pdf diff --git a/Master/texmf-dist/doc/latex/biblatex-dw/biblatex-dw.tex b/Master/texmf-dist/doc/latex/biblatex-dw/biblatex-dw.tex index f3e2663b1bc..ca53df5c9a4 100644 --- a/Master/texmf-dist/doc/latex/biblatex-dw/biblatex-dw.tex +++ b/Master/texmf-dist/doc/latex/biblatex-dw/biblatex-dw.tex @@ -1,5 +1,6 @@ +% !TEX encoding = IsoLatin % biblatex-dw -% Copyright (c) Dominik Waßenhoven <domwass(at)web.de>, 2011 +% Copyright (c) Dominik Waßenhoven <domwass(at)web.de>, 2012 \documentclass[english]{scrartcl} \input{biblatex-dw-preamble}% preamble @@ -76,6 +77,9 @@ I answered some frequently asked questions concerning \bl{} and \bldw{} and made available online:\\ \url{http://biblatex.dominik-wassenhoven.de/faq.shtml?en} +\subsection{Development} +\bldw{} is an open source project hosted at \href{http://sourceforge.net}{sourceforge.net}. The code (also of the latest, not released version) can be downloaded.\footnote{\url{http://sourceforge.net/p/biblatex-dw/code}.} At sourceforge.net you have also the possibility to file bug reports (if possible, including a minimal example)\footnote{\url{http://sourceforge.net/p/biblatex-dw/tickets/milestone/Bugs}.} and feature requests.\footnote{\url{http://sourceforge.net/p/biblatex-dw/tickets/milestone/Features}.} + \section{The \xbx{authortitle-dw} style} This style is based on the standard \xbx{authortitle} style. Besides some changes in punctuation, there are the following differences: @@ -302,9 +306,11 @@ edition = {2., revised} \end{lstlisting} In this case there will only be a space between shorthand and bibliography entry, so that you should redefine the punctuation as well which is printed by the - command \cmd{shorthandinbibpunct}. You could alter it to print a colon, e.g.: + command \cmd{shorthandinbibpunct}. You could alter it to print, for example, an equal + sign, but you should use \cmd{nopunct} in order to avoid superfluous punctuation: \begin{lstlisting} -\renewcommand*{\shorthandinbibpunct}{\addcolon\space} +\renewcommand*{\shorthandinbibpunct}{% + \addspace=\nopunct\addspace} \end{lstlisting} \item The\beschreibung{annotation} option \option{annotation} is introduced. If it is set to \wert{true}, the field \texttt{annotation} will be printed in @@ -361,9 +367,6 @@ edition = {2., revised} \subsection{Appearance in citations} \begin{itemize} - \item Immediately repeated citations are replaced by the string - \enquote{ibidem} unless the citation is the first one on - the current page. \item In citations of the same author\slash editor as the immediately preceding citation the name is replaced by the string \enquote{idem} unless the citation is the first @@ -372,9 +375,11 @@ edition = {2., revised} you would like to switch off the idem functionality, you can use \option{idemtracker=false}. For more information on the \option{idemtracker} option see the \bl{} manual. - \item If you set the option \option{ibidtracker=false}, immediately - repeated citations are no longer replaced by the string - \enquote{ibidem}, but the \enquote{idem} functionality + \item Immediately repeated citations are replaced by the string + \enquote{ibidem} unless the citation is the first one on + the current page. This behaviour can be suppressed with + the \bl{} option \option{ibidtracker=false}. In this case, + the \enquote{idem} functionality is still active as long as you do not set the option \option{idemtracker=false}. \item The\beschreibung{shorthandibid} option \option{shorthandibid} controls whether @@ -474,6 +479,13 @@ edition = {2., revised} first citation. It does not matter, if you only use \cmd{citeauthor} or {textcite} or both. The standard for this option is \wert{false} (i.e. only the last names are printed). + \item The\beschreibung{citeauthor} \option{citeauthor} option controls the name format for the + \cmd{citeauthor} command; it can take the values \wert{namefont}, \wert{namefontfoot} and + \wert{normalfont}. With \option{citeauthor=namefont} the same format as set by the option + \option{namefont} is used. This is the default behaviour. With \option{citeauthor=normalfont} + the normal font is always used for \cmd{citeauthor}, regardless of the \option{namefont} option. + With \option{citeauthor=namefontfoot} the \option{namefont} format is used if the + \cmd{citeauthor} command is inside a footnote, otherwise the normal font is used. \item If\beschreibung{singletitle} you use the \bl{} option \option{singletitle=true}, the title of a cited work is only printed if there is more than one work of the same author. See the biblatex documentation for details. @@ -640,6 +652,10 @@ file (\texttt{biblatex.cfg}). The value in parentheses shows the default. \optlist{annotation}{false} The field \texttt{annotation} is printed at the end of the bibliography item. + \optlist{citeauthor}{namefont} + Specifies the font shape of the authors' names when the \cmd{citeauthor} + command is used. Possible values are \wert{namefont}, \wert{normalfont} and + \wert{namefontfoot}. \optlist{citedas}{true} The first citation (in \xbx{authortitle-dw} only if the option \option{firstfull} is used) is followed by the string diff --git a/Master/texmf-dist/doc/latex/biblatex-dw/de-biblatex-dw.pdf b/Master/texmf-dist/doc/latex/biblatex-dw/de-biblatex-dw.pdf Binary files differindex fe1a9c1ff1d..af64c518e08 100644 --- a/Master/texmf-dist/doc/latex/biblatex-dw/de-biblatex-dw.pdf +++ b/Master/texmf-dist/doc/latex/biblatex-dw/de-biblatex-dw.pdf diff --git a/Master/texmf-dist/doc/latex/biblatex-dw/de-biblatex-dw.tex b/Master/texmf-dist/doc/latex/biblatex-dw/de-biblatex-dw.tex index e6b446b46ae..63e394d9ca7 100644 --- a/Master/texmf-dist/doc/latex/biblatex-dw/de-biblatex-dw.tex +++ b/Master/texmf-dist/doc/latex/biblatex-dw/de-biblatex-dw.tex @@ -1,5 +1,6 @@ +% !TEX encoding = IsoLatin % biblatex-dw -% Copyright (c) Dominik Waßenhoven <domwass(at)web.de>, 2011 +% Copyright (c) Dominik Waßenhoven <domwass(at)web.de>, 2012 % % Diese Datei enthält die deutschsprachige Dokumentation von biblatex-dw @@ -86,6 +87,9 @@ zum Herunterladen anbiete:\\ \href{http://biblatex.dominik-wassenhoven.de/dtk.shtml}% {http://biblatex.dominik-wassenhoven.de/dtk.shtml} +\subsection{Entwicklung} +\bldw{} wird quelloffen entwickelt und bei \href{http://sourceforge.net}{sourceforge.net} gehostet. Der Code (auch der jeweils aktuellen, noch nicht veröffentlichten Version) steht zum Download zur Verfügung.\footnote{\url{http://sourceforge.net/p/biblatex-dw/code}.} Auf sourceforge.net gibt es auch die Möglichkeit, Fehler zu melden und Verbesserungsvorschläge zu machen. Wenn Sie einen Fehler finden, erstellen Sie bitte einen Bug-Report (am besten inklusive Minimalbeispiel).\footnote{\url{http://sourceforge.net/p/biblatex-dw/tickets/milestone/Bugs}.} Für Verbesserungsvorschläge verwenden Sie ein Feature-Request.\footnote{\url{http://sourceforge.net/p/biblatex-dw/tickets/milestone/Features}.} + \section{Der Stil \xbx{authortitle-dw}} Dieser Stil basiert auf dem Standardstil \xbx{authortitle}. @@ -365,10 +369,12 @@ edition = {2., aktualisierte} \end{lstlisting} Da in diesem Fall nur ein Leerzeichen zwischen Sigle und Literatureintrag steht, sollte man auch die Zeichensetzung nach der Sigle umdefinieren. Dafür - ist der Befehl \cmd{shorthandinbibpunct} zuständig, dem man etwa einen - Doppelpunkt zuweisen könnte: + ist der Befehl \cmd{shorthandinbibpunct} zuständig, dem man etwa ein + Gleichheitszeichen zuweisen könnte; dabei sollte man aber \cmd{nopunct} + verwenden, um überflüssige Zeichen nach der Sigle zu vermeiden: \begin{lstlisting} -\renewcommand*{\shorthandinbibpunct}{\addcolon\space} +\renewcommand*{\shorthandinbibpunct}{% + \addspace=\nopunct\addspace} \end{lstlisting} \item Setzt\beschreibung{annotation} man die Option \option{annotation} auf @@ -428,10 +434,8 @@ edition = {2., aktualisierte} \subsection{Zitate im Text} \begin{itemize} - \item Direkt aufeinanderfolgende Zitate werden durch \enquote{ebd.} ersetzt, - sofern das Zitat nicht das erste der aktuellen Seite ist. \item Folgen zwei unterschiedliche Zitate desselben Autors\slash - Herausgebers direkt aufeinander, wird der Name im zweiten Zitat durch + Heraus\-gebers direkt aufeinander, wird der Name im zweiten Zitat durch \enquote{Ders.} oder \enquote{Dies.} ersetzt, sofern das Zitat nicht das erste der aktuellen Seite ist. Das Geschlecht wird im Feld \texttt{gender} festgelegt (siehe dazu die \bl"=Dokumentation). @@ -439,9 +443,10 @@ edition = {2., aktualisierte} kontrolliert, die auf \wert{constrict} gesetzt ist. Wer sie abschalten möchte, verwendet \option{idemtracker=false}. Für weitere Informationen zu dieser Option wird auf die \bl"=Dokumentation verwiesen. - \item Wenn die \bl{}"=Option \option{ibidtracker} auf \wert{false} gesetzt - wird, werden direkt aufeinanderfolgende Zitate nicht durch - \enquote{ebd.} ersetzt; die \enquote{idem}-Funktionalität bleibt aber + \item Direkt aufeinanderfolgende Zitate werden durch \enquote{ebd.} ersetzt, + sofern das Zitat nicht das erste der aktuellen Seite ist. + Dieses Verhalten lässt sich mit der \bl{}"=Option \option{ibidtracker} + unterdrücken. In diesem Fall bleibt die \enquote{idem}-Funktionalität erhalten, solange nicht die Option \option{idemtracker} auf \wert{false} gesetzt wird. \item Die\beschreibung{shorthandibid} @@ -553,6 +558,14 @@ edition = {2., aktualisierte} ausgegeben wird. Dabei ist es egal, ob man nur \cmd{citeauthor}, nur \cmd{textcite} oder beide Befehle gemischt einsetzt. Der Standard für diese Option ist \wert{false} (d.\,h., es wird immer nur der Nachname ausgegeben). + \item Die\beschreibung{citeauthor} Option \option{citeauthor} bestimmt das Format für den + Befehl \cmd{citeauthor}; sie kann die Werte \wert{namefont}, \wert{namefontfoot} und + \wert{normalfont} annehmen. Mit \option{citeauthor=namefont} wird das Format benutzt, + das mit der Option \option{namefont} eingestellt wurde. Dies ist die Standardeinstellung. + Mit \option{citeauthor=normalfont} wird immer die normale Schrift für \cmd{citeauthor} + benutzt, unabhängig von der Einstellung der Option \option{namefont}. Mit + \option{citeauthor=namefontfoot} wird das \option{namefont}"=Format benutzt, wenn der + \cmd{citeauthor}"=Befehl in einer Fußnote steht, ansonsten wird die normale Schrift benutzt. \item Mit\beschreibung{singletitle} der \bl"=Option \option{singletitle=true} wird der Titel eines Werkes nur dann ausgegeben, wenn mehr als ein Werk desselben Autors vorhanden ist. @@ -734,6 +747,10 @@ gesetzt. Der Wert in Klammern gibt den Standard an. \optlist{annotation}{false} Das Feld \texttt{annotation} wird am Ende des Eintrags in der Bibliographie ausgegeben. + \optlist{citeauthor}{namefont} + Legt den Schriftschnitt der Autorennamen bei Verwendung des Befehls \cmd{citeauthor} + fest. Mögliche Werte sind \wert{namefont}, \wert{normalfont} und + \wert{namefontfoot}. \optlist{citedas}{true} Bei Einträgen mit \texttt{shorthand} wird dem Erstzitat (bei \xbx{authortitle-dw} nur mit der Option \option{firstfull}) ein @@ -1243,6 +1260,7 @@ von Bernhard Tempel zusammengestellt. Im Folgenden werden die von \bldw{} zur Verfügung gestellten Befehle mit ihrer Standarddefinition aufgelistet. Diese Befehle können mit \cmd{renewcommand*} angepasst werden. % \befehl{}{}{} +% \befehlleer{}{} \befehl{annotationfont}{\cmd{small}\cmd{itshape}}{Schrift des Feldes \texttt{annotation}.} \befehl{bibfinalnamedelim}{% diff --git a/Master/texmf-dist/doc/latex/biblatex-dw/examples/de-authortitle-dw.pdf b/Master/texmf-dist/doc/latex/biblatex-dw/examples/de-authortitle-dw.pdf Binary files differindex 60855678dc8..f8b8bfd4781 100644 --- a/Master/texmf-dist/doc/latex/biblatex-dw/examples/de-authortitle-dw.pdf +++ b/Master/texmf-dist/doc/latex/biblatex-dw/examples/de-authortitle-dw.pdf diff --git a/Master/texmf-dist/doc/latex/biblatex-dw/examples/de-authortitle-dw.tex b/Master/texmf-dist/doc/latex/biblatex-dw/examples/de-authortitle-dw.tex index c0c0dc47c95..fa2afbd7f74 100644 --- a/Master/texmf-dist/doc/latex/biblatex-dw/examples/de-authortitle-dw.tex +++ b/Master/texmf-dist/doc/latex/biblatex-dw/examples/de-authortitle-dw.tex @@ -1,4 +1,4 @@ -% v 1.4 +% v 1.5 % This file presents the `authortitle-dw' style % \listfiles @@ -12,6 +12,7 @@ %% biblatex-dw-Optionen %%% %acronyms=true, annotation=true, + %citeauthor=normalfont,%namefontfoot,%namefont, %citedas=false, %citepages=suppress,%omit,%permit,%separate, %edbyidem=false, diff --git a/Master/texmf-dist/doc/latex/biblatex-dw/examples/de-footnote-dw.pdf b/Master/texmf-dist/doc/latex/biblatex-dw/examples/de-footnote-dw.pdf Binary files differindex 1b927b8071c..c758701eaba 100644 --- a/Master/texmf-dist/doc/latex/biblatex-dw/examples/de-footnote-dw.pdf +++ b/Master/texmf-dist/doc/latex/biblatex-dw/examples/de-footnote-dw.pdf diff --git a/Master/texmf-dist/doc/latex/biblatex-dw/examples/de-footnote-dw.tex b/Master/texmf-dist/doc/latex/biblatex-dw/examples/de-footnote-dw.tex index 485711e4467..3ccfde5f741 100644 --- a/Master/texmf-dist/doc/latex/biblatex-dw/examples/de-footnote-dw.tex +++ b/Master/texmf-dist/doc/latex/biblatex-dw/examples/de-footnote-dw.tex @@ -1,4 +1,4 @@ -% v 1.4 +% v 1.5 % This file presents the `footnote-dw' style % \documentclass[a4paper]{article} @@ -11,6 +11,7 @@ %% biblatex-dw-Optionen %%% %acronyms=true, annotation=true, + %citeauthor=normalfont,%namefontfoot,%namefont, %citedas=false, %citepages=suppress,%omit,%permit,%separate, %edbyidem=false, diff --git a/Master/texmf-dist/doc/latex/biblatex-dw/examples/en-authortitle-dw.pdf b/Master/texmf-dist/doc/latex/biblatex-dw/examples/en-authortitle-dw.pdf Binary files differindex 601cf391a8b..cc1ff54a72d 100644 --- a/Master/texmf-dist/doc/latex/biblatex-dw/examples/en-authortitle-dw.pdf +++ b/Master/texmf-dist/doc/latex/biblatex-dw/examples/en-authortitle-dw.pdf diff --git a/Master/texmf-dist/doc/latex/biblatex-dw/examples/en-authortitle-dw.tex b/Master/texmf-dist/doc/latex/biblatex-dw/examples/en-authortitle-dw.tex index dd024e8ca88..49aa1997b3d 100644 --- a/Master/texmf-dist/doc/latex/biblatex-dw/examples/en-authortitle-dw.tex +++ b/Master/texmf-dist/doc/latex/biblatex-dw/examples/en-authortitle-dw.tex @@ -1,4 +1,4 @@ -% v 1.4 +% v 1.5 % This file presents the `authortitle-dw' style % \documentclass[a4paper]{article} @@ -11,6 +11,7 @@ %%% biblatex-dw options %%% %acronyms=true, annotation=true, + %citeauthor=normalfont,%namefontfoot,%namefont, %citedas=false, %citepages=suppress,%omit,%permit,%separate, %edbyidem=false, diff --git a/Master/texmf-dist/doc/latex/biblatex-dw/examples/en-footnote-dw.pdf b/Master/texmf-dist/doc/latex/biblatex-dw/examples/en-footnote-dw.pdf Binary files differindex dabd012a427..04e5d42ecf6 100644 --- a/Master/texmf-dist/doc/latex/biblatex-dw/examples/en-footnote-dw.pdf +++ b/Master/texmf-dist/doc/latex/biblatex-dw/examples/en-footnote-dw.pdf diff --git a/Master/texmf-dist/doc/latex/biblatex-dw/examples/en-footnote-dw.tex b/Master/texmf-dist/doc/latex/biblatex-dw/examples/en-footnote-dw.tex index bc481731fa2..442ee374023 100644 --- a/Master/texmf-dist/doc/latex/biblatex-dw/examples/en-footnote-dw.tex +++ b/Master/texmf-dist/doc/latex/biblatex-dw/examples/en-footnote-dw.tex @@ -1,4 +1,4 @@ -% v 1.4 +% v 1.5 % This file presents the `footnote-dw' style % \documentclass[a4paper]{article} @@ -12,6 +12,7 @@ %%% biblatex-dw options %%% %acronyms=true, annotation=true, + %citeauthor=normalfont,%namefontfoot,%namefont, %citedas=false, %citepages=suppress,%omit,%permit,%separate, %edbyidem=false, |