summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/doc/man/man1/pdfxup.1
diff options
context:
space:
mode:
Diffstat (limited to 'Master/texmf-dist/doc/man/man1/pdfxup.1')
-rw-r--r--Master/texmf-dist/doc/man/man1/pdfxup.1138
1 files changed, 108 insertions, 30 deletions
diff --git a/Master/texmf-dist/doc/man/man1/pdfxup.1 b/Master/texmf-dist/doc/man/man1/pdfxup.1
index 57b547e524d..5fe8a3e054a 100644
--- a/Master/texmf-dist/doc/man/man1/pdfxup.1
+++ b/Master/texmf-dist/doc/man/man1/pdfxup.1
@@ -1,6 +1,6 @@
.\" Manpage for pdfxup.
.\" Contact pdfxup@markey.fr to correct errors or typos.
-.TH man 1 "21 october 2020" "1.61" "pdfxup man page"
+.TH man 1 "17 december 2020" "2.00" "pdfxup man page"
.SH NAME
pdfxup \- n-up tool with reduced margins
.SH SYNOPSIS
@@ -22,14 +22,26 @@ package) in order to produce the new document.
pdfxup accepts numerous options. The most important ones are:
.\" additional options should be lister here...
.TP
-\fB\-x\fR n, \fB\-\-columns\fR n
-sets the number of columns in the output file (default 2);
+\fB\-x\fR m, \fB\-\-columns\fR m
+sets the number of columns of the output file (default 2);
.TP
\fB\-y\fR n, \fB\-\-rows\fR n
-sets the number of lines in the output file (default 1);
+sets the number of lines of the output file (default 1);
.TP
-\fB\-l\fR, \fB\-\-landscape\fR
-sets orientation of paper (of final document) landscape;
+\fB\-nup\fR m\fBx\fRn, \fB\--nup\fR m\fBx\fRn
+sets the number of rows and columns of the output file (default 2x1);
+.TP
+\fB\-l\fR (0|1), \fB\-\-landscape\fR, \fB\-\-portrait\fR
+sets orientation of paper (of final document);
+.TP
+\fB\-cf\fR file, \fB\-\-config \fR file, \fB\-\-mode \fR file
+reads file (with extension \fB.xup\fR) and uses options defined in that
+file (see below for details about \fB.xup\fR files).
+All options are processed in the order the appear on the command-line,
+so that it is possible to modify the options set in the configuration
+file (and it is even possible to include several configuration files, the
+later one overwriting the options set by the previous ones).
+Files are looked-up using kpsewhich (if available).
.TP
\fB\-b\fR (le|se), \fB\-\-booklet\fR (le|se)
configure for printing as a booklet. Value 'le' (which is the default
@@ -37,29 +49,42 @@ value when \fB\-b\fR is used with no argument) means that two-sided
printing is in 'long-edge' mode (you turn from one page to the next
along the long edge of the paper). 'se' is the 'short-edge' option.
.TP
-\fB\-c\fR, \fB\-\-clip\fR
-clip pages to the computed bounding box. By default, content is not
-clipped, which may result in overlap of neighbouring pages. With this
-option, anything outside the bounding box will not be displayed.
+\fB\-c\fR, \fB\-\-clip\fR, \fB\-nc\fR, \fB\-\-no-clip\fR
+clip (or don't clip) pages to the computed bounding box. By default,
+content is clipped, to avoid overlap between neighbouring pages.
+With \fB--no-clip\fR, anything outside the bounding box will be
+displayed.
.TP
\fB\-o\fR file, \fB\-\-output\fR file
-name of output file;
+name of output file.
.TP
\fB\-i\fR
-ask before overwriting output file;
+ask before overwriting output file.
+.TP
+\fB\-ow\fR
+overwrite output file without asking.
+.TP
+\fB\-ps\fR s, \fB\-\-paper\fR s
+sets paper size (default a4). The name must be known by package geometry
+(more precisely, "<s>paper" should be defined in that package).
.TP
\fB\-fw\fR d, \fB\-\-framewidth\fR d
width of the frame around each page (default 0.4pt). Set to 0pt to have no
-frame at all;
+frame at all.
+.TP
+\fB\-tf\fR [0|1], \fB\-\-tight-frame\fR [0|1]
+whether the frame should be tight around the page, leaving horizontal
+white space outside the frame, or should be wide and span the whole
+available width.
.TP
\fB\-im\fR d, \fB\-\-innermargins\fR d
-inner margin between frame and page (default 5pt);
+inner margin between frame and page (default 5pt).
.TP
\fB\-m\fR d, \fB\-\-margins\fR d
-margin of pages of the new document (default 5pt);
+margin of pages of the new document (default 5pt).
.TP
\fB\-is\fR d, \fB\-\-intspaces\fR d
-space between different pages (default 1pt);
+space between different pages (default 1pt).
.TP
\fB\-p\fR list, \fB\-\-pages\fR list
only consider sublist of pages of input document. List is a
@@ -70,54 +95,107 @@ includes all pages. Also allows modulo, so that "\fB\-p\fR 0%2" would
include only even-numbered pages.
.TP
\fB\-bb\fR list, \fB\-\-bb\fR list
-only consider sublist of pages of input document for computing bounding box;
+only consider sublist of pages of input document for computing bounding box.
.TP
\fB\-nobb\fR list, \fB\-\-no-bb\fR list
-omit list of pages of input document from computation of bounding box;
+omit list of pages of input document from computation of bounding box.
.TP
\fB\-g\fR, \fB\-\-get-bb\fR
-only compute (and output) bounding box;
+only compute (and output) bounding box. Will not produce any output file.
+.TP
+\fB\-kbb\fR, \fB\-\-keep-bb\fR
+do not compute bounding box, preserve current margins.
.TP
\fB\-s\fR x y W H, \fB\-\-set-bb\fR x y W H
-set the bounding box to the given values;
+set the bounding box to the given values. Values are in pt; the first two
+elements correspond to the lower left corner, while the last two represent
+the width and height of the part to be displayed.
.TP
\fB\-w\fR file, \fB\-\-watermark\fR file
use file as background watermark. file can be any format accepted by
pdflatex (e.g. png or pdf). If file is a multipage PDF file, page n of
the watermark file is used with page n of the input file, and the last
-page of the watermark file is repeated if the input file has more pages;
+page of the watermark file is repeated if the input file has more pages.
.TP
\fB\-wp\fR p, \fB\-\-watermark-period\fR p
-repeat the last p pages of the watermark file instead of only the last one;
+repeat the last p pages of the watermark file instead of only the last one.
.TP
\fB\-d\fR, \fB\-\-debug\fR
-debug mode: keep intermediary files;
+debug mode: keep intermediary files.
.TP
\fB\-V [0-3]\fR, \fB\-\-verbose\fR [0-3]
-select verbosity (default: 1);
+select verbosity (default: 1).
.TP
\fB\-q\fR, \fB\-\-quiet\fR
-run quietly (equiv. '-V=0');
+run quietly (equiv. '-V 0').
.TP
\fB\-v\fR, \fB\-\-version\fR
-print version number and exit;
+print version number and exit.
.TP
\fB\-h\fR, \fB\-\-help\fR
print help message and exit.
+.SH CONFIGURATION FILES
+Configuration files (extension \fB.xup\fR) are bash scripts used
+to set some variables. If option "\fB--config-file\fR <file>"
+(or equivalent) is used, <file> is looked up with kpsewhich
+first, if it contains no '/'. If kpsewhich does not find it,
+then pdfxup checks if the file exists (using 'test -e') before
+sourcing it (the \fBPATH\fR variable will not be used to find
+it).
+
+The script should only set some internal variables of pdfxup, such as
+\fBNB_ROWS\fR, \fBNB_COLUMNS\fR, \fBLANDSCAPE\fR (to set up a
+predefined layout). It can be used to set the bounding box, but it is
+often better to compute it on the first few pages of the document.
+Here are some examples of lines that can be put in a \fB.xup\fR file:
+.TP
+\fBNB_COLUMNS=1\fR
+set the number of columns to 1
+.TP
+\fBNB_ROWS=2\fR
+set the number of rows to 2
+.TP
+\fBLANDSCAPE=0\fR
+set portrait mode
+.TP
+\fBKEEP_ORIG_BBOX=1\fR
+do not crop margins
+.TP
+\fBSET_BBOX="75 47 540 755"
+set bounding box: lower left=(75,47); upper right=(540,755)
+.TP
+\fBTIGHT_FRAME=1\fR
+set tight frames around pages
+.TP
+\fBINNER_MARGINS=10pt\fR
+set margin around each page (inside the frame) to 10pt
+.TP
+\fBINTERM_SPACES=10pt\fR
+set space between pages to 10pt
+.TP
+\fBFRAME_WIDTH=2mm\fR
+set frame width to 2mm
+
+.PP
+Other available variables can be found in the \fBsetdefaultvalues\fR function.
+
.SH EXAMPLES
.TP
\fB# pdfxup file.pdf\fR
-produces 2-up pdf file from file.pdf
+produces 2-up pdf file from file.pdf.
.TP
\fB# pdfxup -bb 1-4 file.pdf\fR
same behaviour, but computes the bounding box only using the
-first 4 pages (this saves time when processing long documents)
+first 4 pages (this saves time when processing long documents).
.TP
\fB# pdfxup -b -o booklet.pdf file.pdf\fR
-same behaviour, but creates a booklet (as booklet.pdf)
+same behaviour, but creates a booklet (as booklet.pdf).
.TP
\fB# pdfxup -kbb -x1 -y2 -l0 beamer-frames.pdf\fR
-arranges 2 beamer frames per page (not reducing margins)
+arranges 2 beamer frames per page (not reducing margins).
+.TP
+\fB# pdfxup --mode beamer2 beamer-frames.pdf\fR
+arranges PDF pages according to beamer2.xup configuration file.
.TP
\fB# pdfxup -kbb -x2 -y2 -l beamer-frames.pdf:1-12,15-19\fR
arranges 4 beamer frames per page (not reducing margins), including