summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/doc/latex
diff options
context:
space:
mode:
Diffstat (limited to 'Master/texmf-dist/doc/latex')
-rw-r--r--Master/texmf-dist/doc/latex/pgfornament-han/README.md17
-rw-r--r--Master/texmf-dist/doc/latex/pgfornament-han/lppl-1-3c.txt416
-rw-r--r--Master/texmf-dist/doc/latex/pgfornament-han/pgfornament-han_manual.pdfbin0 -> 308396 bytes
-rw-r--r--Master/texmf-dist/doc/latex/pgfornament-han/pgfornament-han_manual.tex498
4 files changed, 931 insertions, 0 deletions
diff --git a/Master/texmf-dist/doc/latex/pgfornament-han/README.md b/Master/texmf-dist/doc/latex/pgfornament-han/README.md
new file mode 100644
index 00000000000..caa98f1d68b
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/pgfornament-han/README.md
@@ -0,0 +1,17 @@
+# pgfornament-han v0.3 2018/04/01
+A pgfornament library for Chinese traditional motifs and patterns.
+
+以 pgfornament 宏包的机制，实现绘制汉风图纹。
+
+# Maintainers 宏包维护
+LianTze Lim 林莲枝 (liantze@gmail.com)
+
+# Contributors 开发人员
+Chennan Zhang (23637935@qq.com) drew the motifs using a CAD application,
+re-drew them in `TikZ`, and granted permission for these to be turned into
+a library suitable for use with the `pgfornament` package by LianTze Lim.
+
+所有图纹均由张晨南以 CAD 设计、以TikZ绘制，再由林莲枝转为适用 pgfornament 机制的宏包代码。
+
+# License
+[LaTeX Project Public License (LPPL 1.3c)](https://www.latex-project.org/lppl/lppl-1-3c/)
diff --git a/Master/texmf-dist/doc/latex/pgfornament-han/lppl-1-3c.txt b/Master/texmf-dist/doc/latex/pgfornament-han/lppl-1-3c.txt
new file mode 100644
index 00000000000..22443139013
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/pgfornament-han/lppl-1-3c.txt
@@ -0,0 +1,416 @@
+The LaTeX Project Public License
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+
+LPPL Version 1.3c 2008-05-04
+
+Copyright 1999 2002-2008 LaTeX3 Project
+ Everyone is allowed to distribute verbatim copies of this
+ license document, but modification of it is not allowed.
+
+
+PREAMBLE
+========
+
+The LaTeX Project Public License (LPPL) is the primary license under
+which the LaTeX kernel and the base LaTeX packages are distributed.
+
+You may use this license for any work of which you hold the copyright
+and which you wish to distribute. This license may be particularly
+suitable if your work is TeX-related (such as a LaTeX package), but
+it is written in such a way that you can use it even if your work is
+unrelated to TeX.
+
+The section `WHETHER AND HOW TO DISTRIBUTE WORKS UNDER THIS LICENSE',
+below, gives instructions, examples, and recommendations for authors
+who are considering distributing their works under this license.
+
+This license gives conditions under which a work may be distributed
+and modified, as well as conditions under which modified versions of
+that work may be distributed.
+
+We, the LaTeX3 Project, believe that the conditions below give you
+the freedom to make and distribute modified versions of your work
+that conform with whatever technical specifications you wish while
+maintaining the availability, integrity, and reliability of
+that work. If you do not see how to achieve your goal while
+meeting these conditions, then read the document `cfgguide.tex'
+and `modguide.tex' in the base LaTeX distribution for suggestions.
+
+
+DEFINITIONS
+===========
+
+In this license document the following terms are used:
+
+ `Work'
+ Any work being distributed under this License.
+
+ `Derived Work'
+ Any work that under any applicable law is derived from the Work.
+
+ `Modification'
+ Any procedure that produces a Derived Work under any applicable
+ law -- for example, the production of a file containing an
+ original file associated with the Work or a significant portion of
+ such a file, either verbatim or with modifications and/or
+ translated into another language.
+
+ `Modify'
+ To apply any procedure that produces a Derived Work under any
+ applicable law.
+
+ `Distribution'
+ Making copies of the Work available from one person to another, in
+ whole or in part. Distribution includes (but is not limited to)
+ making any electronic components of the Work accessible by
+ file transfer protocols such as FTP or HTTP or by shared file
+ systems such as Sun's Network File System (NFS).
+
+ `Compiled Work'
+ A version of the Work that has been processed into a form where it
+ is directly usable on a computer system. This processing may
+ include using installation facilities provided by the Work,
+ transformations of the Work, copying of components of the Work, or
+ other activities. Note that modification of any installation
+ facilities provided by the Work constitutes modification of the Work.
+
+ `Current Maintainer'
+ A person or persons nominated as such within the Work. If there is
+ no such explicit nomination then it is the `Copyright Holder' under
+ any applicable law.
+
+ `Base Interpreter'
+ A program or process that is normally needed for running or
+ interpreting a part or the whole of the Work.
+
+ A Base Interpreter may depend on external components but these
+ are not considered part of the Base Interpreter provided that each
+ external component clearly identifies itself whenever it is used
+ interactively. Unless explicitly specified when applying the
+ license to the Work, the only applicable Base Interpreter is a
+ `LaTeX-Format' or in the case of files belonging to the
+ `LaTeX-format' a program implementing the `TeX language'.
+
+
+
+CONDITIONS ON DISTRIBUTION AND MODIFICATION
+===========================================
+
+1. Activities other than distribution and/or modification of the Work
+are not covered by this license; they are outside its scope. In
+particular, the act of running the Work is not restricted and no
+requirements are made concerning any offers of support for the Work.
+
+2. You may distribute a complete, unmodified copy of the Work as you
+received it. Distribution of only part of the Work is considered
+modification of the Work, and no right to distribute such a Derived
+Work may be assumed under the terms of this clause.
+
+3. You may distribute a Compiled Work that has been generated from a
+complete, unmodified copy of the Work as distributed under Clause 2
+above, as long as that Compiled Work is distributed in such a way that
+the recipients may install the Compiled Work on their system exactly
+as it would have been installed if they generated a Compiled Work
+directly from the Work.
+
+4. If you are the Current Maintainer of the Work, you may, without
+restriction, modify the Work, thus creating a Derived Work. You may
+also distribute the Derived Work without restriction, including
+Compiled Works generated from the Derived Work. Derived Works
+distributed in this manner by the Current Maintainer are considered to
+be updated versions of the Work.
+
+5. If you are not the Current Maintainer of the Work, you may modify
+your copy of the Work, thus creating a Derived Work based on the Work,
+and compile this Derived Work, thus creating a Compiled Work based on
+the Derived Work.
+
+6. If you are not the Current Maintainer of the Work, you may
+distribute a Derived Work provided the following conditions are met
+for every component of the Work unless that component clearly states
+in the copyright notice that it is exempt from that condition. Only
+the Current Maintainer is allowed to add such statements of exemption
+to a component of the Work.
+
+ a. If a component of this Derived Work can be a direct replacement
+ for a component of the Work when that component is used with the
+ Base Interpreter, then, wherever this component of the Work
+ identifies itself to the user when used interactively with that
+ Base Interpreter, the replacement component of this Derived Work
+ clearly and unambiguously identifies itself as a modified version
+ of this component to the user when used interactively with that
+ Base Interpreter.
+
+ b. Every component of the Derived Work contains prominent notices
+ detailing the nature of the changes to that component, or a
+ prominent reference to another file that is distributed as part
+ of the Derived Work and that contains a complete and accurate log
+ of the changes.
+
+ c. No information in the Derived Work implies that any persons,
+ including (but not limited to) the authors of the original version
+ of the Work, provide any support, including (but not limited to)
+ the reporting and handling of errors, to recipients of the
+ Derived Work unless those persons have stated explicitly that
+ they do provide such support for the Derived Work.
+
+ d. You distribute at least one of the following with the Derived Work:
+
+ 1. A complete, unmodified copy of the Work;
+ if your distribution of a modified component is made by
+ offering access to copy the modified component from a
+ designated place, then offering equivalent access to copy
+ the Work from the same or some similar place meets this
+ condition, even though third parties are not compelled to
+ copy the Work along with the modified component;
+
+ 2. Information that is sufficient to obtain a complete,
+ unmodified copy of the Work.
+
+7. If you are not the Current Maintainer of the Work, you may
+distribute a Compiled Work generated from a Derived Work, as long as
+the Derived Work is distributed to all recipients of the Compiled
+Work, and as long as the conditions of Clause 6, above, are met with
+regard to the Derived Work.
+
+8. The conditions above are not intended to prohibit, and hence do not
+apply to, the modification, by any method, of any component so that it
+becomes identical to an updated version of that component of the Work as
+it is distributed by the Current Maintainer under Clause 4, above.
+
+9. Distribution of the Work or any Derived Work in an alternative
+format, where the Work or that Derived Work (in whole or in part) is
+then produced by applying some process to that format, does not relax or
+nullify any sections of this license as they pertain to the results of
+applying that process.
+
+10. a. A Derived Work may be distributed under a different license
+ provided that license itself honors the conditions listed in
+ Clause 6 above, in regard to the Work, though it does not have
+ to honor the rest of the conditions in this license.
+
+ b. If a Derived Work is distributed under a different license, that
+ Derived Work must provide sufficient documentation as part of
+ itself to allow each recipient of that Derived Work to honor the
+ restrictions in Clause 6 above, concerning changes from the Work.
+
+11. This license places no restrictions on works that are unrelated to
+the Work, nor does this license place any restrictions on aggregating
+such works with the Work by any means.
+
+12. Nothing in this license is intended to, or may be used to, prevent
+complete compliance by all parties with all applicable laws.
+
+
+NO WARRANTY
+===========
+
+There is no warranty for the Work. Except when otherwise stated in
+writing, the Copyright Holder provides the Work `as is', without
+warranty of any kind, either expressed or implied, including, but not
+limited to, the implied warranties of merchantability and fitness for a
+particular purpose. The entire risk as to the quality and performance
+of the Work is with you. Should the Work prove defective, you assume
+the cost of all necessary servicing, repair, or correction.
+
+In no event unless required by applicable law or agreed to in writing
+will The Copyright Holder, or any author named in the components of the
+Work, or any other party who may distribute and/or modify the Work as
+permitted above, be liable to you for damages, including any general,
+special, incidental or consequential damages arising out of any use of
+the Work or out of inability to use the Work (including, but not limited
+to, loss of data, data being rendered inaccurate, or losses sustained by
+anyone as a result of any failure of the Work to operate with any other
+programs), even if the Copyright Holder or said author or said other
+party has been advised of the possibility of such damages.
+
+
+MAINTENANCE OF THE WORK
+=======================
+
+The Work has the status `author-maintained' if the Copyright Holder
+explicitly and prominently states near the primary copyright notice in
+the Work that the Work can only be maintained by the Copyright Holder
+or simply that it is `author-maintained'.
+
+The Work has the status `maintained' if there is a Current Maintainer
+who has indicated in the Work that they are willing to receive error
+reports for the Work (for example, by supplying a valid e-mail
+address). It is not required for the Current Maintainer to acknowledge
+or act upon these error reports.
+
+The Work changes from status `maintained' to `unmaintained' if there
+is no Current Maintainer, or the person stated to be Current
+Maintainer of the work cannot be reached through the indicated means
+of communication for a period of six months, and there are no other
+significant signs of active maintenance.
+
+You can become the Current Maintainer of the Work by agreement with
+any existing Current Maintainer to take over this role.
+
+If the Work is unmaintained, you can become the Current Maintainer of
+the Work through the following steps:
+
+ 1. Make a reasonable attempt to trace the Current Maintainer (and
+ the Copyright Holder, if the two differ) through the means of
+ an Internet or similar search.
+
+ 2. If this search is successful, then enquire whether the Work
+ is still maintained.
+
+ a. If it is being maintained, then ask the Current Maintainer
+ to update their communication data within one month.
+
+ b. If the search is unsuccessful or no action to resume active
+ maintenance is taken by the Current Maintainer, then announce
+ within the pertinent community your intention to take over
+ maintenance. (If the Work is a LaTeX work, this could be
+ done, for example, by posting to comp.text.tex.)
+
+ 3a. If the Current Maintainer is reachable and agrees to pass
+ maintenance of the Work to you, then this takes effect
+ immediately upon announcement.
+
+ b. If the Current Maintainer is not reachable and the Copyright
+ Holder agrees that maintenance of the Work be passed to you,
+ then this takes effect immediately upon announcement.
+
+ 4. If you make an `intention announcement' as described in 2b. above
+ and after three months your intention is challenged neither by
+ the Current Maintainer nor by the Copyright Holder nor by other
+ people, then you may arrange for the Work to be changed so as
+ to name you as the (new) Current Maintainer.
+
+ 5. If the previously unreachable Current Maintainer becomes
+ reachable once more within three months of a change completed
+ under the terms of 3b) or 4), then that Current Maintainer must
+ become or remain the Current Maintainer upon request provided
+ they then update their communication data within one month.
+
+A change in the Current Maintainer does not, of itself, alter the fact
+that the Work is distributed under the LPPL license.
+
+If you become the Current Maintainer of the Work, you should
+immediately provide, within the Work, a prominent and unambiguous
+statement of your status as Current Maintainer. You should also
+announce your new status to the same pertinent community as
+in 2b) above.
+
+
+WHETHER AND HOW TO DISTRIBUTE WORKS UNDER THIS LICENSE
+======================================================
+
+This section contains important instructions, examples, and
+recommendations for authors who are considering distributing their
+works under this license. These authors are addressed as `you' in
+this section.
+
+Choosing This License or Another License
+----------------------------------------
+
+If for any part of your work you want or need to use *distribution*
+conditions that differ significantly from those in this license, then
+do not refer to this license anywhere in your work but, instead,
+distribute your work under a different license. You may use the text
+of this license as a model for your own license, but your license
+should not refer to the LPPL or otherwise give the impression that
+your work is distributed under the LPPL.
+
+The document `modguide.tex' in the base LaTeX distribution explains
+the motivation behind the conditions of this license. It explains,
+for example, why distributing LaTeX under the GNU General Public
+License (GPL) was considered inappropriate. Even if your work is
+unrelated to LaTeX, the discussion in `modguide.tex' may still be
+relevant, and authors intending to distribute their works under any
+license are encouraged to read it.
+
+A Recommendation on Modification Without Distribution
+-----------------------------------------------------
+
+It is wise never to modify a component of the Work, even for your own
+personal use, without also meeting the above conditions for
+distributing the modified component. While you might intend that such
+modifications will never be distributed, often this will happen by
+accident -- you may forget that you have modified that component; or
+it may not occur to you when allowing others to access the modified
+version that you are thus distributing it and violating the conditions
+of this license in ways that could have legal implications and, worse,
+cause problems for the community. It is therefore usually in your
+best interest to keep your copy of the Work identical with the public
+one. Many works provide ways to control the behavior of that work
+without altering any of its licensed components.
+
+How to Use This License
+-----------------------
+
+To use this license, place in each of the components of your work both
+an explicit copyright notice including your name and the year the work
+was authored and/or last substantially modified. Include also a
+statement that the distribution and/or modification of that
+component is constrained by the conditions in this license.
+
+Here is an example of such a notice and statement:
+
+ %% pig.dtx
+ %% Copyright 2005 M. Y. Name
+ %
+ % This work may be distributed and/or modified under the
+ % conditions of the LaTeX Project Public License, either version 1.3
+ % of this license or (at your option) any later version.
+ % The latest version of this license is in
+ % http://www.latex-project.org/lppl.txt
+ % and version 1.3 or later is part of all distributions of LaTeX
+ % version 2005/12/01 or later.
+ %
+ % This work has the LPPL maintenance status `maintained'.
+ %
+ % The Current Maintainer of this work is M. Y. Name.
+ %
+ % This work consists of the files pig.dtx and pig.ins
+ % and the derived file pig.sty.
+
+Given such a notice and statement in a file, the conditions
+given in this license document would apply, with the `Work' referring
+to the three files `pig.dtx', `pig.ins', and `pig.sty' (the last being
+generated from `pig.dtx' using `pig.ins'), the `Base Interpreter'
+referring to any `LaTeX-Format', and both `Copyright Holder' and
+`Current Maintainer' referring to the person `M. Y. Name'.
+
+If you do not want the Maintenance section of LPPL to apply to your
+Work, change `maintained' above into `author-maintained'.
+However, we recommend that you use `maintained', as the Maintenance
+section was added in order to ensure that your Work remains useful to
+the community even when you can no longer maintain and support it
+yourself.
+
+Derived Works That Are Not Replacements
+---------------------------------------
+
+Several clauses of the LPPL specify means to provide reliability and
+stability for the user community. They therefore concern themselves
+with the case that a Derived Work is intended to be used as a
+(compatible or incompatible) replacement of the original Work. If
+this is not the case (e.g., if a few lines of code are reused for a
+completely different task), then clauses 6b and 6d shall not apply.
+
+
+Important Recommendations
+-------------------------
+
+ Defining What Constitutes the Work
+
+ The LPPL requires that distributions of the Work contain all the
+ files of the Work. It is therefore important that you provide a
+ way for the licensee to determine which files constitute the Work.
+ This could, for example, be achieved by explicitly listing all the
+ files of the Work near the copyright notice of each file or by
+ using a line such as:
+
+ % This work consists of all files listed in manifest.txt.
+
+ in that place. In the absence of an unequivocal list it might be
+ impossible for the licensee to determine what is considered by you
+ to comprise the Work and, in such a case, the licensee would be
+ entitled to make reasonable conjectures as to which files comprise
+ the Work.
+
diff --git a/Master/texmf-dist/doc/latex/pgfornament-han/pgfornament-han_manual.pdf b/Master/texmf-dist/doc/latex/pgfornament-han/pgfornament-han_manual.pdf
new file mode 100644
index 00000000000..215652717fe
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/pgfornament-han/pgfornament-han_manual.pdf
Binary files differ
diff --git a/Master/texmf-dist/doc/latex/pgfornament-han/pgfornament-han_manual.tex b/Master/texmf-dist/doc/latex/pgfornament-han/pgfornament-han_manual.tex
new file mode 100644
index 00000000000..8e19da2b156
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/pgfornament-han/pgfornament-han_manual.tex
@@ -0,0 +1,498 @@
+% !TEX option = --shell-escape
+% !TEX program = xelatex
+\documentclass{ctexart}
+
+\usepackage[dvipsnames]{xcolor}
+\usepackage{pgfornament-han}
+\usetikzlibrary{chains}
+\usetikzlibrary{calc}
+\usetikzlibrary{decorations}
+\usetikzlibrary{decorations.text,decorations.markings}
+
+\usepackage{cncolours}
+
+\usepackage{geometry}
+\geometry{hmargin=1in,vmargin=0.8in,headheight=10pt}
+
+\usepackage{tcolorbox}
+
+
+%%%%%% 这段代码可以忽视，只是 --shell-escape 时调用 minted 不然就用 listings
+\ifnum\shellescape=1
+ \tcbuselibrary{minted}
+ \setminted{breaksymbolleft={},breakindent=\ccwd}
+ \newminted{latex}{}
+ \newmintinline{latex}{}
+\else
+ \tcbuselibrary{listings}
+ \newcommand{\latexinline}[1]{\lstinline|#1|}
+ \lstnewenvironment{latexcode}{\lstset{language={[LaTeX]TeX}}}{}
+ \lstset{basicstyle=\ttfamily}
+\fi
+%%%%%%%%
+
+
+\tcbset{fonttitle=\kaishu\large\bfseries,colback=铅白!60!white,colbacktitle=绀青,coltitle=精白,colframe=墨灰}
+
+\makeatletter
+\newcommand{\getpgfornamenthanDim}[1]{%
+ {\@pgfornamenthanDim{#1}宽：\@pgfornamentX\\高：\@pgfornamentY}%
+}
+\makeatother
+
+\usepackage{fancyhdr}
+\fancyhf{}
+\renewcommand{\headrule}{}
+
+\fancyhead[L]{%
+\newbox{\fortyseven}
+\savebox{\fortyseven}{\pgfornamenthan[scale=0.2,color=鸭卵青]{47}}
+\tikzset{every node/.append style={inner sep=0pt,鸭卵青}}
+\begin{tikzpicture}[overlay,remember picture]
+\node[anchor=north west,shift={(14.5pt,-14.5pt)}] at (current page.north west)
+ (nw) {\pgfornamenthan[scale=0.2]{25}};
+\node[anchor=north east,shift={(-14.5pt,-14.5pt)}] at (current page.north east)
+ (ne) {\pgfornamenthan[scale=0.2,symmetry=v]{25}};
+\node[anchor=south west,shift={(14.5pt,14.5pt)}] at (current page.south west)
+ (sw) {\pgfornamenthan[scale=0.2,symmetry=h]{25}};
+\node[anchor=south east,shift={(-14.5pt,14.5pt)}] at (current page.south east)
+ (se) {\pgfornamenthan[scale=0.2,symmetry=c]{25}};
+%
+\begin{scope}[start chain,node distance=0pt]
+\node[anchor=north west,on chain] at (nw.north east) {\usebox{\fortyseven}};
+\foreach \i in {1,...,15} {
+ \node[on chain]{\usebox{\fortyseven}};
+}
+\end{scope}
+%
+\begin{scope}[start chain,node distance=0pt]
+\node[anchor=south west,on chain] at (sw.south east) {\usebox{\fortyseven}};
+\foreach \i in {1,...,6} \node[on chain]{\usebox{\fortyseven}};
+\end{scope}
+%
+\begin{scope}[start chain=going left,node distance=0pt]
+\node[anchor=south east,on chain] at (se.south west) {\usebox{\fortyseven}};
+\foreach \i in {1,...,6} \node[on chain]{\usebox{\fortyseven}};
+\end{scope}
+%
+% 垂直的话 chains 比较不好控制，我懒得折腾了，直接用 \foreach。
+% 自己算一下， (47) 长度 155. 那么 scale = 0.2 的话……
+\foreach \i in {0,...,21}
+ \node[anchor=south west,rotate=-90,shift={($\i*(31bp,0)$)}] at (nw.south west)
+ {\usebox{\fortyseven}};
+%
+\foreach \i in {0,...,21}
+ \node[anchor=south east,rotate=90,shift={($\i*(-31bp,0)$)}] at (ne.south east)
+ {\usebox{\fortyseven}};
+%
+%% 严格来说应该放在 \fancyfoot 吧，算了一样啦
+\node[yshift=32pt,铜绿] at (current page.south) {\pgfornamenthan[scale=0.1]{51}};
+\node[yshift=32pt,text=black] at (current page.south) {\large\thepage};
+%
+\end{tikzpicture}
+}
+
+\pagestyle{fancy}
+\fancypagestyle{plain}{\pagestyle{fancy}}
+
+\usepackage[hidelinks]{hyperref}
+
+\title{汉风图纹 \texttt{pgfornament-han} v0.3}
+\author{林莲枝、张晨南}
+\date{v0.3 2018/04/01\\\url{https://github.com/liantze/pgfornament-han}}
+
+\begin{document}
+
+\maketitle
+
+\begin{abstract}
+利用 \texttt{pgfornament} 宏包可以在 \LaTeX{} 文件里便捷地画出十分典雅漂亮的、欧式风格的花纹。（详情请自行访问 \url{http://ctan.org/pkg/pgfornament}。）
+\texttt{pgfornament-han} 宏包的用意，正是为了尝试用 \texttt{pgfornament} 的已有机制，提供一些汉风的传统图纹。所有图纹均由\emph{张晨南}以 CAD 程式定稿、TikZ 绘制，再由\emph{林莲枝}转为适合 \texttt{pgfornament} 机制使用的宏包代码。
+\end{abstract}
+
+\part{基本用法}
+
+\texttt{n} 为图纹编号的话，最简单的用法是 \latexinline{\pgfornamenthan[color=red,width=1.5cm]{n}}。
+也可以用 \texttt{height} 或者 \texttt{scale} 设定大小。注意图纹比例是不变的，因此只有最后给出的选项有效。此外 \texttt{symmetry} 参数可以实现3种镜像，\texttt{v} (垂直）、\texttt{h}（水平）、\texttt{c}（中心=垂直+水平镜像），画边框的四个角点时很好用。其它TikZ 参数的应用：
+
+\begin{latexcode}
+\tikzset{pgfornamentstyle/.append style={draw=black,fill=red,line width=1}}
+\pgfornamenthan[scale=2]{n}
+\end{latexcode}
+
+以下是一些范例。
+
+\bigskip
+
+\begin{tcblisting}{title={文本中的使用},listing side text,righthand width=5.5cm}
+先来一个 \pgfornamenthan[color=blue,scale=0.18]{56}
+寿字纹。原本的 \pgfornament[scale=0.2]{56} 依然可用。
+\end{tcblisting}
+
+\enlargethispage{\baselineskip}
+
+
+\begin{tcblisting}{title={TikZ选项的应用},listing side text,righthand width=3cm}
+\begin{tikzpicture}[baseline={(current bounding box.center)}]
+ \tikzset{pgfornamentstyle/.style={
+ draw=Goldenrod,fill=Red,line width=1pt}}
+ \node[fill=black,circle,draw=Red,line width=2pt,inner sep=-8pt]
+ at (0,0) {\pgfornamenthan[scale=0.38]{56}};
+\end{tikzpicture}
+\end{tcblisting}
+
+\begin{tcblisting}{title={简单的边框范例}}
+
+\begin{tikzpicture}[x=1pt,y=1pt]
+ \tikzset{every node/.append style={inner sep=0pt,color=茜色}}
+ \node (nw) {\pgfornamenthan[scale=0.35]{1}};
+ \node[anchor=north west,right=140bp of nw] (ne) {\pgfornamenthan[symmetry=v,scale=0.35]{1}};
+ \node[anchor=north west,below=0pt of nw] (sw) {\pgfornamenthan[symmetry=h,scale=0.35]{1}};
+ \node[anchor=north east,below=0pt of ne] (se) {\pgfornamenthan[symmetry=c,scale=0.35]{1}};
+
+ %% 用 pgfornmanet 自带的 \draw (A) to[ornamenthan=19] (B) 机制的话会导致线条高度跟着变化！只好折衷用tikz的 xscale 来实现加长了。\pgfornamenthan 本身的 scale 则要确保和角点的 scale 一致。
+ \node[anchor=south west,xscale=2] at (sw.south east) {\pgfornamenthan[scale=0.35]{29}};
+
+ %% 另外一种方法是用 decorations，同样需要注意一下各种长度参数
+ \begin{scope}[decoration={markings,
+ mark=between positions 0 and 0.75 step 70bp with
+ { \node[transform shape,anchor=north west]{\pgfornamenthan[scale=0.35]{29}};}
+ }]
+ \draw[decorate] (nw.north east) -- (ne.north west);
+ \end{scope}
+
+ \node[font=\kaishu,align=center,xshift=70,text=black] at (nw.south east)
+ {给我一片海棠红啊海棠红\\血一样的海棠红\\
+ 沸血的烧痛是乡愁的烧痛\\给我一片海棠红啊海棠红};
+\end{tikzpicture}
+\end{tcblisting}
+
+\begin{tcblisting}{title={另一个简单的边框范例}}
+\begin{tikzpicture}
+ \tikzset{every node/.append style={铜绿,inner sep=0pt}}
+ \node (nw) {\pgfornamenthan[scale=0.25]{12}};
+ \node[right=50bp of nw] (ne) {\pgfornamenthan[scale=0.25,symmetry=v]{12}};
+ \node[below=50bp of nw] (sw) {\pgfornamenthan[scale=0.25,symmetry=h]{12}};
+ \node[below=50bp of ne] (se) {\pgfornamenthan[scale=0.25,symmetry=c]{12}};
+ % 每个部件原宽度为200bp,因此绘画时如果以bp作为单位，会比较容易计算xscale的值。这里 scale=0.25 则部件有效宽度为50bp，刚好是两个角点符号之间的距离，因此不需要再设 xscale。
+ \node[anchor=north west] at (nw.north east) {\pgfornamenthan[scale=0.25]{32}};
+ \node[anchor=south west] at (sw.south east) {\pgfornamenthan[scale=0.25]{32}};
+ \node[anchor=south west,rotate=-90] at (nw.south west) {\pgfornamenthan[scale=0.25]{32}};
+ \node[anchor=south east,rotate=90] at (ne.south east) {\pgfornamenthan[scale=0.25]{32}};
+
+\node[anchor=center,靛蓝,shift={(25bp,-25bp)}] at (nw.south east) {\pgfornamenthan[scale=0.5]{57}};
+\end{tikzpicture}
+\end{tcblisting}
+
+
+\begin{tcblisting}{title=有些部件衔接可能需要手动\texttt{shift}}
+ \begin{tikzpicture}\tikzset{every node/.append style={赤金,inner sep=0pt}}
+ \node (nw) {\pgfornamenthan[scale=0.2]{23}};
+ \node[right=53bp of nw] (ne) {\pgfornamenthan[scale=0.2,symmetry=v]{23}};
+ \node[anchor=north west,xshift=2bp] at (nw.north east) {\pgfornamenthan[scale=0.2]{41}};
+ \node[anchor=north east,xshift=-2bp] at (ne.north west) {\pgfornamenthan[scale=0.2,symmetry=v]{41}};
+ \end{tikzpicture}
+\end{tcblisting}
+
+\begin{tcblisting}{listing only,title={框着整个页面的代码。很适合拿来设计奖状证书的有木有！}}
+ \newbox{\fortyseven}
+ \savebox{\fortyseven}{\pgfornamenthan[scale=0.2,color=鸭卵青]{47}}
+ \tikzset{every node/.append style={inner sep=0pt,鸭卵青}}
+ \begin{tikzpicture}[overlay,remember picture]
+ \node[anchor=north west,shift={(14.5pt,-14.5pt)}] at (current page.north west)
+ (nw) {\pgfornamenthan[scale=0.2]{25}};
+ \node[anchor=north east,shift={(-14.5pt,-14.5pt)}] at (current page.north east)
+ (ne) {\pgfornamenthan[scale=0.2,symmetry=v]{25}};
+ \node[anchor=south west,shift={(14.5pt,14.5pt)}] at (current page.south west)
+ (sw) {\pgfornamenthan[scale=0.2,symmetry=h]{25}};
+ \node[anchor=south east,shift={(-14.5pt,14.5pt)}] at (current page.south east)
+ (se) {\pgfornamenthan[scale=0.2,symmetry=c]{25}};
+ %
+ \begin{scope}[start chain,node distance=0pt]
+ \node[anchor=north west,on chain] at (nw.north east) {\usebox{\fortyseven}};
+ \foreach \i in {1,...,15} {
+ \node[on chain]{\usebox{\fortyseven}};
+ }
+ \end{scope}
+ %
+ \begin{scope}[start chain,node distance=0pt]
+ \node[anchor=south west,on chain] at (sw.south east) {\usebox{\fortyseven}};
+ \foreach \i in {1,...,6} \node[on chain]{\usebox{\fortyseven}};
+ \end{scope}
+ %
+ \begin{scope}[start chain=going left,node distance=0pt]
+ \node[anchor=south east,on chain] at (se.south west) {\usebox{\fortyseven}};
+ \foreach \i in {1,...,6} \node[on chain]{\usebox{\fortyseven}};
+ \end{scope}
+ %
+ % 垂直的话 chains 比较不好控制，我懒得折腾了，直接用 \foreach。
+ % 自己算一下， (47) 长度 155. 那么 scale = 0.2 的话……
+ \foreach \i in {0,...,21}
+ \node[anchor=south west,rotate=-90,shift={($\i*(31bp,0)$)}] at (nw.south west)
+ {\usebox{\fortyseven}};
+ %
+ \foreach \i in {0,...,21}
+ \node[anchor=south east,rotate=90,shift={($\i*(-31bp,0)$)}] at (ne.south east)
+ {\usebox{\fortyseven}};
+ %
+ %% 严格来说应该放在 \fancyfoot 吧，算了一样啦
+ \node[yshift=32pt,铜绿] at (current page.south) {\pgfornamenthan[scale=0.1]{51}};
+ \node[yshift=32pt,text=black] at (current page.south) {\large\thepage};
+ %
+ \end{tikzpicture}
+\end{tcblisting}
+
+\part{纹样列表}
+
+以下部件的原宽度、原高度皆以1bp为单元。
+
+
+\setlength{\parindent}{0pt}\raggedright
+
+\section{角点符号}
+
+\subsection{接单线的角点符号}
+
+有实心线型与对应的空心线型两种。以下皆同。
+
+\bigskip
+
+
+\foreach \n in {1,...,8}{%
+ \begin{tikzpicture}
+ \fill[牙色](-1cm,-1cm) rectangle (1cm,1cm);
+ \node[inner sep=0pt] (element) {\pgfornamenthan[color=茜色,width=1.8cm]{\n}};
+ \node[inner sep=0pt,font=\footnotesize\bfseries\sffamily,color=紫檀] at (0.8cm,-0.8cm) {\n};
+ \node[anchor=west,text width=4em,font=\footnotesize] at (1.1cm,0) {\getpgfornamenthanDim{\n}};
+ \draw[color=牙色] (1cm,-1cm) rectangle (2.8cm,1cm);
+ \end{tikzpicture}\space\space
+}
+
+\subsection{接双线的角点符号}
+
+\foreach \n in {9,...,14}{%
+ \begin{tikzpicture}
+ \fill[牙色](-1cm,-1cm) rectangle (1cm,1cm);
+ \node[inner sep=0pt] (element) {\pgfornamenthan[color=茜色,width=1.8cm]{\n}};
+ \node[inner sep=0pt,font=\footnotesize\bfseries\sffamily,color=紫檀] at (0.8cm,-0.8cm) {\n};
+ \node[anchor=west,text width=4em,font=\footnotesize] at (1.1cm,0) {\getpgfornamenthanDim{\n}};
+ \draw[color=牙色] (1cm,-1cm) rectangle (2.8cm,1cm);
+ \end{tikzpicture}\space\space
+}
+
+
+\subsection{简单角点符号}
+
+和其他角点符号配合，在一条对角线上使用其他角点符号，另一条对角 线上使用简单角点符号。
+
+\bigskip
+
+\foreach \n in {15,...,18}{%
+ \begin{tikzpicture}
+ \fill[牙色](-1cm,-1cm) rectangle (1cm,1cm);
+ \node[inner sep=0pt] (element) {\pgfornamenthan[color=茜色,width=1.8cm]{\n}};
+ \node[inner sep=0pt,font=\footnotesize\bfseries\sffamily,color=紫檀] at (0.8cm,-0.8cm) {\n};
+ \node[anchor=west,text width=4em,font=\footnotesize] at (1.1cm,0) {\getpgfornamenthanDim{\n}};
+ \draw[color=牙色] (1cm,-1cm) rectangle (2.8cm,1cm);
+ \end{tikzpicture}\space\space
+}
+
+\subsection{回纹的角点符号}
+
+和连续的回纹配合。
+
+\bigskip
+
+\foreach \n in {19,...,22}{%
+ \begin{tikzpicture}
+ \fill[牙色](-1cm,-1cm) rectangle (1cm,1cm);
+ \node[inner sep=0pt] (element) {\pgfornamenthan[color=茜色,width=1.8cm]{\n}};
+ \node[inner sep=0pt,font=\footnotesize\bfseries\sffamily,color=紫檀] at (0.8cm,-0.8cm) {\n};
+ \node[anchor=west,text width=4em,font=\footnotesize] at (1.1cm,0) {\getpgfornamenthanDim{\n}};
+ \draw[color=牙色] (1cm,-1cm) rectangle (2.8cm,1cm);
+ \end{tikzpicture}\space\space
+}
+
+\bigskip\bigskip
+
+和离散的回纹配合。
+
+\bigskip
+
+\foreach \n in {23,...,28}{%
+ \begin{tikzpicture}
+ \fill[牙色](-1cm,-1cm) rectangle (1cm,1cm);
+ \node[inner sep=0pt] (element) {\pgfornamenthan[color=茜色,width=1.8cm]{\n}};
+ \node[inner sep=0pt,font=\footnotesize\bfseries\sffamily,color=紫檀] at (0.8cm,-0.8cm) {\n};
+ \node[anchor=west,text width=4em,font=\footnotesize] at (1.1cm,0) {\getpgfornamenthanDim{\n}};
+ \draw[color=牙色] (1cm,-1cm) rectangle (2.8cm,1cm);
+ \end{tikzpicture}\space\space
+}
+
+
+\section{线型单元}
+
+\subsection{单线、双线直线}
+
+\foreach \n in {29,...,32}{%
+ \begin{tikzpicture}
+ \fill[牙色](-1cm,-1cm) rectangle (1cm,1cm);
+ \node[inner sep=0pt] (element) {\pgfornamenthan[color=茜色,width=1.8cm]{\n}};
+ \node[inner sep=0pt,font=\footnotesize\bfseries\sffamily,color=紫檀] at (0.8cm,-0.8cm) {\n};
+ \node[anchor=west,text width=4em,font=\footnotesize] at (1.1cm,0) {\getpgfornamenthanDim{\n}};
+ \draw[color=牙色] (1cm,-1cm) rectangle (2.8cm,1cm);
+ \end{tikzpicture}\space\space
+}
+
+\subsection{回字纹}
+
+\subsubsection{连续}
+
+\foreach \n in {33,...,36}{%
+ \begin{tikzpicture}
+ \fill[牙色](-1cm,-1.1cm) rectangle (1cm,0.9cm);
+ \node[inner sep=0pt] (element) {\pgfornamenthan[color=茜色,height=0.6cm]{\n}};
+ \node[inner sep=0pt,font=\footnotesize\bfseries\sffamily,color=紫檀] at (0.8cm,-0.9cm) {\n};
+ \node[anchor=west,text width=4em,font=\footnotesize] at (1.1cm,0) {\getpgfornamenthanDim{\n}};
+ \draw[color=牙色] (1cm,-1.1cm) rectangle (2.8cm,0.9cm);
+ \end{tikzpicture}\space\space
+}%
+\foreach \n in {37,...,40}{%
+ \begin{tikzpicture}
+ \fill[牙色](-1cm,-1.1cm) rectangle (1cm,0.9cm);
+ \node[inner sep=0pt] (element) {\pgfornamenthan[color=茜色,height=1.1cm]{\n}};
+ \node[inner sep=0pt,font=\footnotesize\bfseries\sffamily,color=紫檀] at (0.8cm,-0.9cm) {\n};
+ \node[anchor=west,text width=4em,font=\footnotesize] at (1.1cm,0) {\getpgfornamenthanDim{\n}};
+ \draw[color=牙色] (1cm,-1.1cm) rectangle (2.8cm,0.9cm);
+ \end{tikzpicture}\space\space
+}
+
+\subsubsection{离散}
+
+\foreach \n in {41,...,44}{%
+ \begin{tikzpicture}
+ \fill[牙色](-1cm,-1.1cm) rectangle (1cm,0.9cm);
+ \node[inner sep=0pt] (element) {\pgfornamenthan[color=茜色,height=0.6cm]{\n}};
+ \node[inner sep=0pt,font=\footnotesize\bfseries\sffamily,color=紫檀] at (0.8cm,-0.9cm) {\n};
+ \node[anchor=west,text width=4em,font=\footnotesize] at (1.1cm,0) {\getpgfornamenthanDim{\n}};
+ \draw[color=牙色] (1cm,-1.1cm) rectangle (2.8cm,0.9cm);
+ \end{tikzpicture}\space\space
+}
+
+\subsubsection{离散连接}
+
+\foreach \n in {45,...,48}{%
+ \begin{tikzpicture}
+ \fill[牙色](-1cm,-1.1cm) rectangle (1cm,0.9cm);
+ \node[inner sep=0pt] (element) {\pgfornamenthan[color=茜色,height=0.6cm]{\n}};
+ \node[inner sep=0pt,font=\footnotesize\bfseries\sffamily,color=紫檀] at (0.8cm,-0.9cm) {\n};
+ \node[anchor=west,text width=4em,font=\footnotesize] at (1.1cm,0) {\getpgfornamenthanDim{\n}};
+ \draw[color=牙色] (1cm,-1.1cm) rectangle (2.8cm,0.9cm);
+ \end{tikzpicture}\space\space
+}
+
+\subsubsection{圆周排布的回纹}
+\foreach \n in {49,...,54}{%
+ \begin{tikzpicture}
+ \fill[牙色](-1.5cm,-1.5cm) rectangle (1.5cm,1.5cm);
+ \node[inner sep=0pt] (element) {\pgfornamenthan[color=茜色,width=2.8cm]{\n}};
+ \node[inner sep=0pt,font=\footnotesize\bfseries\sffamily,color=紫檀] at (0,0) {\n};
+ \node[anchor=west,text width=4em,font=\footnotesize] at (1.6cm,0) {\getpgfornamenthanDim{\n}};
+ \draw[color=牙色] (1.5cm,-1.5cm) rectangle (3.5cm,1.5cm);
+ \end{tikzpicture}\space\space
+}
+
+\section{吉祥纹路}
+
+\subsection{福字纹}
+
+\foreach \n in {55}{%
+ \begin{tikzpicture}
+ \fill[牙色](-1cm,-1cm) rectangle (1cm,1cm);
+ \node[inner sep=0pt] (element) {\pgfornamenthan[color=茜色,width=1.8cm]{\n}};
+ \node[inner sep=0pt,font=\footnotesize\bfseries\sffamily,color=紫檀] at (0.8cm,-0.8cm) {\n};
+ \node[anchor=west,text width=4em,font=\footnotesize] at (1.1cm,0) {\getpgfornamenthanDim{\n}};
+ \draw[color=牙色] (1cm,-1cm) rectangle (2.8cm,1cm);
+ \end{tikzpicture}\space\space
+}
+
+\subsection{寿字纹}
+
+\foreach \n in {56,57}{%
+ \begin{tikzpicture}
+ \fill[牙色](-1cm,-1cm) rectangle (1cm,1cm);
+ \node[inner sep=0pt] (element) {\pgfornamenthan[color=茜色,width=1.8cm]{\n}};
+ \node[inner sep=0pt,font=\footnotesize\bfseries\sffamily,color=紫檀] at (0.8cm,-0.8cm) {\n};
+ \node[anchor=west,text width=4em,font=\footnotesize] at (1.1cm,0) {\getpgfornamenthanDim{\n}};
+ \draw[color=牙色] (1cm,-1cm) rectangle (2.8cm,1cm);
+ \end{tikzpicture}\space\space
+}
+
+\section{云纹}
+
+\subsection{对称符号}
+
+\foreach \n in {58,...,61}{%
+\begin{tikzpicture}
+ \fill[牙色](-1.5cm,-1cm) rectangle (1.5cm,1cm);
+ \node[inner sep=0pt] (element) {\pgfornamenthan[color=茜色,width=2.8cm]{\n}};
+ \node[inner sep=0pt,font=\footnotesize\bfseries\sffamily,color=紫檀] at (1.3cm,-0.8cm) {\n};
+ \node[anchor=west,text width=4em,font=\footnotesize] at (1.6cm,0) {\getpgfornamenthanDim{\n}};
+ \draw[color=牙色] (1.5cm,-1cm) rectangle (3.5cm,1cm);
+\end{tikzpicture}\space\space
+}
+
+
+\subsection{左右侧符号}
+
+\foreach \n in {62,...,71}{%
+ \begin{tikzpicture}
+ \fill[牙色](-1cm,-1cm) rectangle (1cm,1cm);
+ \node[inner sep=0pt] (element) {\pgfornamenthan[color=茜色,width=1.8cm]{\n}};
+ \node[inner sep=0pt,font=\footnotesize\bfseries\sffamily,color=紫檀] at (0.8cm,-0.8cm) {\n};
+ \node[anchor=west,text width=4em,font=\footnotesize] at (1.1cm,0) {\getpgfornamenthanDim{\n}};
+ \draw[color=牙色] (1cm,-1cm) rectangle (2.8cm,1cm);
+ \end{tikzpicture}\space\space
+}
+
+
+\subsection{角落符号}
+
+\foreach \n in {72,...,75}{%
+ \begin{tikzpicture}
+ \fill[牙色](-1cm,-1cm) rectangle (1cm,1cm);
+ \node[inner sep=0pt] (element) {\pgfornamenthan[color=茜色,width=1.8cm]{\n}};
+ \node[inner sep=0pt,font=\footnotesize\bfseries\sffamily,color=紫檀] at (0.8cm,0.8cm) {\n};
+ \node[anchor=west,text width=4em,font=\footnotesize] at (1.1cm,0) {\getpgfornamenthanDim{\n}};
+ \draw[color=牙色] (1cm,-1cm) rectangle (2.8cm,1cm);
+ \end{tikzpicture}\space\space
+}
+
+\subsection{连接线}
+
+\foreach \n in {76,...,77}{%
+ \begin{tikzpicture}
+ \fill[牙色](-1cm,-1cm) rectangle (1cm,1cm);
+ \node[inner sep=0pt] (element) {\pgfornamenthan[color=茜色,width=1cm]{\n}};
+ \node[inner sep=0pt,font=\footnotesize\bfseries\sffamily,color=紫檀] at (0.8cm,-0.8cm) {\n};
+ \node[anchor=west,text width=4em,font=\footnotesize] at (1.1cm,0) {\getpgfornamenthanDim{\n}};
+ \draw[color=牙色] (1cm,-1cm) rectangle (2.8cm,1cm);
+ \end{tikzpicture}\space\space
+}
+
+\vfill
+
+\begin{center}
+\begin{tikzpicture}
+ \tikzset{every node/.append style={铜绿,inner sep=0pt,node distance=0pt}}
+ \node (nw) {\pgfornamenthan[scale=0.2]{6}};
+ \node[right=100bp of nw] (ne) {\pgfornamenthan[scale=0.2,symmetry=v]{16}};
+ \node[below=-8bp of nw] (sw) {\pgfornamenthan[scale=0.2,symmetry=h]{16}};
+ \node[below=-8bp of ne] (se) {\pgfornamenthan[scale=0.2,symmetry=c]{6}};
+ \node[anchor=north west,xscale=2.5] at (nw.north east) {\pgfornamenthan[scale=0.2]{30}};
+ \node[anchor=south west,xscale=2.5] at (sw.south east) {\pgfornamenthan[scale=0.2]{30}};
+ \node[font=\kaishu\Large,text=black,shift={(50bp,4bp)}] at (nw.south east) {待续};
+\end{tikzpicture}
+\end{center}
+
+\end{document}
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 23:56:30 +0000