diff options
Diffstat (limited to 'Master/texmf-dist/doc/latex/turnthepage')
-rw-r--r-- | Master/texmf-dist/doc/latex/turnthepage/Makefile | 3004 |
1 files changed, 3004 insertions, 0 deletions
diff --git a/Master/texmf-dist/doc/latex/turnthepage/Makefile b/Master/texmf-dist/doc/latex/turnthepage/Makefile new file mode 100644 index 00000000000..0d387edbcd3 --- /dev/null +++ b/Master/texmf-dist/doc/latex/turnthepage/Makefile @@ -0,0 +1,3004 @@ +# Copyright 2004 Chris Monson (shiblon@gmail.com) +# Latest version available at http://www.bouncingchairs.net/oss +# +# This file is part of ``Chris Monson's Free Software''. +# +# ``Chris Monson's Free Software'' is free software; you can redistribute it +# and/or modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation, Version 2. +# +# ``Chris Monson's Free Software'' is distributed in the hope that it will +# be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General +# Public License for more details. +# +# You should have received a copy of the GNU General Public License along +# with ``Chris Monson's Free Software''; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +# +# It is also available on the web at http://www.gnu.org/copyleft/gpl.html +# +# Note that using this makefile to build your documents does NOT place them +# under the GPL unless you, the author, specifically do so. In other words, +# I, Chris Monson, the copyright holder and author of this makefile, +# consider it impossible to ``link'' to this makefile in any way covered by +# the GPL. +# +# TO OBTAIN INSTRUCTIONS FOR USING THIS FILE, RUN: +# make help +# +fileinfo := LaTeX Makefile +author := Chris Monson +version := 2.1.34 +svninfo := $$Id$$ +# +# If you specify sources here, all other files with the same suffix +# will be treated as if they were _include_ files. +#onlysources.tex ?= main.tex +#onlysources.tex.sh ?= +#onlysources.rst ?= +#onlysources.fig ?= +#onlysources.gpi ?= +#onlysources.dot ?= +#onlysources.xvg ?= +#onlysources.svg ?= +#onlysources.eps.gz ?= +#onlysources.eps ?= +# +# If you list files here, they will be treated as _include_ files +#includes.tex ?= file1.tex file2.tex +#includes.tex.sh ?= +#includes.rst ?= +#includes.fig ?= +#includes.gpi ?= +#includes.dot ?= +#includes.xvg ?= +#includes.svg ?= +#includes.eps.gz ?= +#includes.eps ?= +# +# If you list files or wildcards here, they will *not* be cleaned - default is +# to allow everything to be cleaned. +#neverclean ?= *.pdf +# +# Alternatively (recommended), you can add those lines to a Makefile.ini file +# and it will get picked up automatically without your having to edit this +# Makefile. +-include Makefile.ini + +# TODO: +# * Sometimes we get +# "mv: cannot stat '*.dvi.1st.make': No such file or directory" +# on the second build (if nothing triggered a .d rebuild, but +# the .dvi rule fired anyway). To reproduce in the +# dissertation directory: +# +# make clean +# make byumsphd-example +# make byumsphd-example +# +# KNOWN ISSUES: +# * The following occurs: +# file with: \usepackage{named}\bibliographystyle{named} +# Compile +# change to: \usepackage{apalike}\bibliographystyle{apalike} +# Compile again -- BARF! +# +# The workaround: make clean-nographics; make +# +# Note that we may not be able to fix this. LaTeX itself barfs +# on this, not the makefile. The very first invocation of LaTeX +# (when something like this has happened) reads the existing .aux +# file and discovers invalid commands like \citeauthoryear that +# are only valid in the package that was just removed. It then +# tries to parse them and explodes. It's not at all clear to me +# how to fix this. I tried removing the .aux files on the first +# run of LaTeX, but that necessarily requires more subsequent +# rebuilds on common edits. There does not appear to be a +# graceful solution to this issue. +# +# CHANGES: +# Chris Monson (2009-10-29): +# * Bumped version to 2.1.34 +# * Fixed _out_ creation bug introduced in 2.1.33 (it was always created) +# * Fixed erroneous help output for $HOME in BINARY_TARGET_DIR +# * Changed contact email address - bring on the spam! +# Chris Monson (2009-10-21): +# * Bumped version to 2.1.33 +# * Fixed issue 46, adding support for dot2tex (thanks to fdemesmay) +# * Made all_files.* settable in Makefile.ini (using ?= instead of :=) +# * Fixed issue 47, thanks to fdemesmay: add binary copy directory, copy +# dvi, pdf, and ps if it exists +# Chris Monson (2009-09-25): +# * Bumped version to 2.1.32 +# * Fixed so that a changed lol file will cause a rebuild +# * Added .lol files to the cleanable list +# Chris Monson (2009-09-08): +# * Bumped version to 2.1.31 +# * Closed issue 43: evince doesn't notice pdf change w/out touch +# Chris Monson (2009-08-28): +# * Bumped version to 2.1.30 +# * Closed issue 39: Capture multi-line log warnings/errors to output +# Chris Monson (2009-08-26): +# * Bumped version to 2.1.29 +# * Closed issue 42: add svg support using inkscape +# Chris Monson (2009-08-17): +# * Bumped version to 2.1.28 +# * Patch from paul.biggar for issue 38: package warnings are overlooked +# Chris Monson (2009-08-07): +# * Bumped version to 2.1.27 +# * Included patch for issue 37 - removes pdf/ps files before copying, +# allowing some broken viewers to see changes properly. +# Chris Monson (2009-05-15): +# * Bumped version to 2.1.26 +# * Included patch for issue 9 from favonia - detects .fig changes for +# pstex files during regular compilation, so long as the pstex +# has been built at least once with make all-pstex. +# Chris Monson (2009-03-27): +# * Bumped version to 2.1.25 +# * Cleaned up a bunch of variable setting stuff - more stuff is now +# settable from Makefile.ini +# * Cleaned up documentation for various features, especially settable +# variables. +# * issue 28: support for png -> eps conversion (it even looks good!) +# * issue 29: support for "neverclean" files in Makefile.ini +# * issue 30: make ps2pdf14 the default - fall back when not there +# Chris Monson (2009-03-09): +# * Bumped version to 2.1.24 +# * issue 27: xmgrace support (thanks to rolandschulzhd) +# Chris Monson (2008-10-23): +# * Bumped version to 2.1.23 +# * issue 23: fixed _check_programs to not use bash string subs +# Chris Monson (2008-09-02): +# * Bumped version to 2.1.22 +# * Appled patch from Holger <yllohy@googlemail.com> to add include +# sources and some documentation updates. +# * Updated backup_patterns to be a bit more aggressive (also thanks to +# Holger) +# Chris Monson (2008-08-30): +# * Bumped version to 2.1.21 +# * Added ability to specify onlysources.* variables to indicate the only +# files that should *not* be considered includes. Thanks to Holger +# <yllohy@googlemail.com> for this patch. +# * Added an automatic include of Makefile.ini if it exists. Allows +# settings to be made outside of this makefile. +# Chris Monson (2008-05-21): +# * Bumped version to 2.1.20 +# * Added manual pstex compilation support (run make all-pstex first) +# * Removed all automatic pstex support. It was totally breaking +# everything and is very hard to incorporate into the makefile +# concept because it requires LaTeX to *fail* before it can +# determine that it needs the files. +# Chris Monson (2008-04-17): +# * Bumped version to 2.1.19 +# * Changed the pstex build hack to be on by default +# Chris Monson (2008-04-09): +# * Bumped version to 2.1.18 +# * issue 16: fixed pstex build problems, seems nondeterministic. Added +# gratuitious hack for testing: set PSTEX_BUILD_ALL_HACK=1. +# Chris Monson (2008-04-09): +# * Bumped version to 2.1.17 +# * issue 20: fixed accumulation of <pid>*.make files - wildcard was +# refusing to work on files that are very recently created. +# Chris Monson (2008-04-02): +# * Bumped version to 2.1.16 +# * issue 19: Removed the use of "type" to fix broken "echo" settings +# Chris Monson (2008-03-27): +# * Bumped version to 2.1.15 +# * issue 18: Favors binary echo over builtin, as binary understands -n +# * issue 16: Fixed handling of missing pstex_t files in the log +# * issue 9: Added .SECONDARY target for .pstex files +# Chris Monson (2008-03-21): +# * Bumped version to 2.1.14 +# * Fixed broken aux file flattening, which caused included bibs to be +# missed. +# Chris Monson (2008-03-20): +# * Bumped version to 2.1.13 +# * Changed error output colorization to show errors for missing files +# that are not graphics files. +# Chris Monson (2008-03-20): +# * Bumped version to 2.1.12 +# * Fixed a regression introduced in r28 that makes bibtex fail when +# there is no index file present +# Chris Monson (2008-03-03): +# * Bumped version to 2.1.11 +# * Fixed issue 11 (handle index files, reported by abachn) +# * Cleaned up some comments and help text +# Chris Monson (2008-01-24): +# * Bumped version to 2.1.10 +# * Fixed to work when 'sh' is a POSIX shell like 'dash' +# Chris Monson (2007-12-12): +# * Bumped version to 2.1.9 +# * Fixed documentation and dependency graph for pstex files +# Chris Monson (2007-12-12): +# * Bumped version to 2.1.8 +# * Added basic pstex_t support for fig files (Issue 9 by favonia) +# I still suggest that psfrag be used instead. +# Chris Monson (2007-10-16): +# * Bumped version to 2.1.7 +# * Removed todo item: allow other comment directives for rst conversion +# * Added ability to use global rst style file _rststyle_._include_.tex +# * Added help text to that effect +# Chris Monson (2007-05-20): +# * Bumped version to 2.1.6 +# * Changed default paper size for rst files +# * Added todo item: fix paper size for rst files +# * Added todo item: allow other comment directives for rst conversion +# Chris Monson (2007-04-02): +# * Bumped version to 2.1.5 +# * Addressed Issue 7, incorrect .gpi.d generation in subdirectories +# Chris Monson (2007-03-28): +# * Bumped version to 2.1.4 +# * Fixed syntax error in dot output +# Chris Monson (2007-03-01): +# * Bumped version to 2.1.3 +# * Added reST to the included documentation +# * Fixed graphics and script generation to be settable in the +# environment. +# Chris Monson (2007-02-23): +# * Bumped version to 2.1.2 +# * Added the ability to generate .tex files from .rst files +# Chris Monson (2006-10-17): +# * Bumped version to 2.1.1 +# * Fixed includes from subdirectories (sed-to-sed slash escape problem) +# Chris Monson (2006-10-05): +# * Bumped version to 2.1.0 (pretty serious new feature added) +# * New feature: bib files can now be anywhere on the BIBINPUTS path +# * New programs: kpsewhich (with tetex) and xargs (BSD) +# Chris Monson (2006-09-28): +# * Bumped version to 2.0.9 +# * Added ability to parse more than one bibliography +# Chris Monson (2006-06-01): +# * Bumped version to 2.0.8 +# * Added .vrb to the list of cleaned files +# Chris Monson (2006-04-26): +# * Bumped version to 2.0.7 +# * Fixed so that clean-nographics does not remove .gpi.d files +# * Removed jpg -> eps hack (not working properly -- just pre-convert) +# * Fixed so that postscript grayscale can be done with BSD sed +# Chris Monson (2006-04-25): +# * Bumped version to 2.0.6 +# * Fixed so that changed toc, lot, lof, or out causes a rebuild +# Chris Monson (2006-04-17): +# * Bumped version to 2.0.5 +# * Added jpg -> eps conversion target +# Chris Monson (2006-04-12): +# * Bumped version to 2.0.4 +# * Fixed BSD sed invocation to not use \| as a branch delimiter +# * Added a comment section on what is and is not allowed in BSD sed +# * Made paper size handling more robust while I was at it +# * Fixed postscript RGB grayscale to use a weighted average +# * Fixed postscript HSB grayscale to convert to RGB first +# * Fixed a problem with rebuilding .bbl files +# Chris Monson (2006-04-11): +# * Bumped version to 2.0.3 +# * Fixed some BSD sed problems: can't use \n in substitutions +# Chris Monson (2006-04-10): +# * Bumped version to 2.0.2 +# * Once again removed ability to create .tex files from scripts +# * \includeonly works again +# Chris Monson (2006-04-09): +# * Bumped version to 2.0.1 +# * Fixed grayscale postscript handling to be more robust +# * Added ability to generate ._gray_. files from eps and eps.gz +# * Added ability to clean ._gray_.eps files created from .eps files +# Chris Monson (2006-04-07): +# * Bumped version to 2.0.0 +# * Removed clunky ability to create included .tex files from scripts +# * Added note in the help about included tex scripting not working +# * Fixed the .eps generation to delete %.gpihead.make when finished +# * Abandoned designs to use shell variables to create sed scripts +# * Abandoned __default__.tex.sh idea: it causes recursion with %: . +# * Removed web page to-do. All items are now complete. +# * Added better grayscale conversion for dot figures (direct ps fixup). +# * Include files can now be scripted (at the expense of \includeonly). +# * Updated dependency graph to contain better node names. +# Chris Monson (2006-04-06): +# * Bumped version to 2.0b3 +# * Top level includes now fail if there is no rule to build them +# * A helpful message is printed when they do fail +# * Grayscale has been changed to be ._gray_, other phonies use _ now, too +# * Grayscale handling has been completed +# * Changed _include_stems target to _includes target. +# * Fixed _includes target to be useful by itself. +# * Removed the ability to specify clean and build targets at once +# * Verified that epsfig works fine with current code +# * Fixed included scripts so that they are added to the dep files +# * Fixed so that graphics includes don't happen if they aren't for gpi +# * Fixed dot output to allow grayscale. +# Chris Monson (2006-04-05): +# * Bumped version to 2.0b2 +# * Removed automatic -gray output. It needs fixing in a bad way. +# * Revamped dependency creation completely. +# * Fixed conditional inclusion to actually work (test.nobuild.d, test.d). +# * Fixed clean target to remove log targets +# * Added the 'monochrome' word for gray gpi output +# * Added a _check_gpi_files target that checks for common problems +# * Changed the _version target into the version target (no _) +# * Added better handling of grayscale files. Use the .gray.pdf target. +# * Fixed testing for rebuilds +# Chris Monson (2006-04-04): +# * Bumped version to 2.0b1 +# * Changed colorization of output +# * Made .auxbbl and .auxtex .make files secondary targets +# * Shortened and simplified the final latex invocation loop +# * Added version-specific output ($$i vs. $$$$i) in latex loop +# * Added a build message for the first .dvi run (Building .dvi (0)) +# * Removed some build messages that most people don't care about. +# * Simplified procedure for user-set colors -- simple text specification +# * Fixed diff output to...not output. +# * Fixed rerun bug -- detect not only when preceded with LaTeX Warning +# * Sped up gpi plotting +# * Added error handling and colorized output for gpi failure +# * Documented color changing stuff. +# * Now sort the flattened aux file to avoid false recompilation needs +# * Added clean-nographics target +# * Don't remove self.dvi file if self.aux is missing in the log +# * Clarified some code. Did some very minor adjusting. +# Chris Monson (2006-04-03): +# * Bumped version to 2.0a7 +# * Added .dvi and .ps files as secondary files. +# * Fixed handling of multiple run detection when includeonly is in use. +# * Added code to flatten .aux files. +# * Added more files as .SECONDARY prerequisites to avoid recompilation. +# * Fixed the inputs generation to be much simpler and to use pipes. +# * Added the dependency graph directly into the makefile. +# * Changed flatten-aux to remove \@writefile \relax \newlabel, etc. +# * Undid pipe changes with sed usage (BSD sed doesn't know -f-). +# * Added a _check_programs target that tells you what your system has. +# * Fixed an error in colorization that made unnecessary errors appear +# * Added view targets. +# * Updated help text. +# * Augmented cookies so that .aux can trigger .bbl and .dvi rebuilds +# * Added more informative error handling for dvips and ps2pdf +# Chris Monson (2006-04-02): +# * Bumped version to 2.0a6 +# * Added indirection to .bbl dependencies to avoid rebuilding .bbl files +# * Streamlined the diff invocation to eliminate an existence test +# * Removed special shell quote escape variables +# * Moved includes to a more prominent location +# * Fixed .inputs.make to not contain .aux files +# * Fixed embedding to use a file instead of always grepping. +# * Added *.make.temp to the list of cleanable files +# * Fixed Ruby. It should now be supported properly. +# * Now differentiate between all, default, and buildable files. +# * Fixed to bail out on serious errors. +# * Revised the handling of includable files. Still working on it. +# Chris Monson (2006-03-31): +# * Bumped version to 2.0a5 +# * Fixed a bug with LaTeX error detection (there can be spaces) +# * Added .bbl support, simplifying everything and making it more correct +# * Refactored some tests that muddy the code +# * Did a little cleanup of some shell loops that can safely be make loops +# * Added support for graphviz .dot files +# * Made _all_programs output easier to read +# * Added the ruby support that has long been advertised +# * Font embedding was screwed up for PostScript -- now implicit +# * Changed the generation of -gray.gpi files to a single command +# * Changed any make-generated file that is not included from .d to .make +# Chris Monson (2006-03-30): +# * Bumped version to 2.0a4 +# * Fixed a bug with very long graphics file names +# * Added a todo entry for epsfig support +# * Fixed a bug paper size bug: sometimes more than one entry appears +# * Fixed DVI build echoing to display the number instead of process ID +# * DVI files are now removed on first invocation if ANY file is missing +# * Added a simple grayscale approach: if a file ends with -gray.gpi, it +# is created from the corresponding .gpi file with a special +# comment ##GRAY in its header, which causes coloring to be +# turned off. +# * Fixed a bug in the handling of .tex.sh files. For some reason I had +# neglected to define file stems for scripted output. +# * Removed a trailing ; from the %.graphics dependencies +# * Added dvips embedding (I think it works, anyway) +# Chris Monson (2006-03-29): +# * Bumped version to 2.0a3 +# * Fixed error in make 3.79 with MAKEFILE_LIST usage +# * Added the presumed filename to the _version output +# * Added a vim macro for converting sed scripts to make commands +# * Added gpi dependency support (plotting external files and loading gpi) +# * Allow .gpi files to be ignored if called .include.gpi or .nobuild.gpi +# * Fixed sed invocations where \+ was used. BSD sed uses \{1,\}. +# Chris Monson (2006-03-28): +# * Bumped version to 2.0a2 +# * Added SHELL_DEBUG and VERBOSE options +# * Changed the default shell back to /bin/sh (unset, in other words) +# * Moved .PHONY declarations closer to their targets +# * Moved help text into its own define block to obtain better formatting +# * Removed need for double-entry when adding a new program invocation +# * Moved .SECONDARY declaration closer to its relevant occurrence +# * Commented things more heavily +# * Added help text about setting terminal and output in gnuplot +# * Created more fine-grained clean targets +# * Added a %.graphics target that generates all of %'s graphics +# * Killed backward-compatible graphics generation (e.g., eps.gpi=gpi.eps) +# * For now, we're just GPL 2, not 3. Maybe it will change later +# * Made the version and svninfo into variables +# Chris Monson (2006-03-27): +# * Bumped version to 2.0a1 +# * Huge, sweeping changes -- automatic dependencies + +# IMPORTANT! +# +# When adding to the following list, do not introduce any blank lines. The +# list is extracted for documentation using sed and is terminated by a blank +# line. +# +# EXTERNAL PROGRAMS: +# = ESSENTIAL PROGRAMS = +# == Basic Shell Utilities == +CAT ?= cat +CP ?= cp -f +DIFF ?= diff +ECHO ?= echo +EGREP ?= egrep +ENV ?= env +MV ?= mv -f +SED ?= sed +SORT ?= sort +TOUCH ?= touch +UNIQ ?= uniq +WHICH ?= which +XARGS ?= xargs +# == LaTeX (tetex-provided) == +BIBTEX ?= bibtex +DVIPS ?= dvips +LATEX ?= latex +MAKEINDEX ?= makeindex +KPSEWHICH ?= kpsewhich +PS2PDF_NORMAL ?= ps2pdf +PS2PDF_EMBED13 ?= ps2pdf13 +PS2PDF_EMBED ?= ps2pdf14 +# = OPTIONAL PROGRAMS = +# == Makefile Color Output == +TPUT ?= tput +# == TeX Generation == +RST2LATEX ?= rst2latex.py +# == EPS Generation == +DOT ?= dot # GraphViz +DOT2TEX ?= dot2tex # dot2tex - add options (not -o) as needed +FIG2DEV ?= fig2dev # XFig +GNUPLOT ?= gnuplot # GNUplot +INKSCAPE ?= inkscape # Inkscape (svg support) +XMGRACE ?= xmgrace # XMgrace +PNGTOPNM ?= pngtopnm # From NetPBM - step 1 for png -> eps +PPMTOPGM ?= ppmtopgm # From NetPBM - (gray) step 2 for png -> eps +PNMTOPS ?= pnmtops # From NetPBM - step 3 for png -> eps +GUNZIP ?= gunzip # GZipped EPS +# == Beamer Enlarged Output == +PSNUP ?= psnup +# == Viewing Stuff == +VIEW_POSTSCRIPT ?= gv +VIEW_PDF ?= xpdf +VIEW_GRAPHICS ?= display + +# This ensures that even when echo is a shell builtin, we still use the binary +# (the builtin doesn't always understand -n) +FIXED_ECHO := $(if $(findstring -n,$(shell $(ECHO) -n)),$(shell which echo),$(ECHO)) +ECHO := $(if $(FIXED_ECHO),$(FIXED_ECHO),$(ECHO)) + +# Directory into which we place "binaries" if it exists. +# Note that this can be changed on the commandline or in Makefile.ini: +# +# Command line: +# make BINARY_TARGET_DIR=$HOME/pdfs myfile.pdf +# +# Also, you can specify a relative directory (relative to the Makefile): +# make BINARY_TARGET_DIR=pdfs myfile.pdf +# +# Or, you can use Makefile.ini: +# +# BINARY_TARGET_DIR := $(HOME)/bin_out +# +BINARY_TARGET_DIR ?= _out_ + +# Fall back to ps2pdf13 (and ultimately ps2pdf) if ps2pdf14 is not on the system: +PS2PDF_EMBED := \ + $(if \ + $(shell $(WHICH) $(PS2PDF_EMBED)), \ + $(PS2PDF_EMBED), \ + $(if \ + $(shell $(WHICH) $(PS2PDF_EMBED13)), \ + $(PS2PDF_EMBED13), \ + $(PS2PDF_NORMAL) \ + ) \ + ) + +# SH NOTES +# +# On some systems, /bin/sh, which is the default shell, is not linked to +# /bin/bash. While bash is supposed to be sh-compatible when invoked as sh, it +# just isn't. This section details some of the things you have to stay away +# from to remain sh-compatible. +# +# * File pattern expansion does not work for {} +# * [ "$x" = "$y" ] has to be [ x"$x" x"$y" ] +# * &> for stderr redirection doesn't work, use 2>&1 instead +# +# BSD SED NOTES +# +# BSD SED is not very nice compared to GNU sed, but it is the most +# commonly-invoked sed on Macs (being based on BSD), so we have to cater to +# it or require people to install GNU sed. It seems like the GNU +# requirement isn't too bad since this makefile is really a GNU makefile, +# but apparently GNU sed is much less common than GNU make in general, so +# I'm supporting it here. +# +# Sad experience has taught me the following about BSD sed: +# +# * \+ is not understood to mean \{1,\} +# * \| is meaningless (does not branch) +# * \n cannot be used as a substitution character +# * ? does not mean \{0,1\}, but is literal +# * a\ works, but only reliably for a single line if subsequent lines +# have forward slashes in them (as is the case in postscript) +# +# For more info (on the Mac) you can consult +# +# man -M /usr/share/man re_format +# +# And look for the word "Obsolete" near the bottom. + +# +# EXTERNAL PROGRAM DOCUMENTATION SCRIPT +# + +# $(call output-all-programs,[<output file>]) +define output-all-programs + [ -f '$(this_file)' ] && \ + $(SED) \ + -e '/^[[:space:]]*#[[:space:]]*EXTERNAL PROGRAMS:/,/^$$/!d' \ + -e '/EXTERNAL PROGRAMS/d' \ + -e '/^$$/d' \ + -e '/^[[:space:]]*#/i\ '\ + -e 's/^[[:space:]]*#[[:space:]][^=]*//' \ + $(this_file) $(if $1,> '$1',) || \ + $(ECHO) "Cannot determine the name of this makefile." +endef + +# If they misspell gray, it should still work. +GRAY ?= $(call get-default,$(GREY),) + +# +# Utility Functions and Definitions +# + +# While not exactly a make function, this vim macro is useful. It takes a +# verbatim sed script and converts each line to something suitable in a command +# context. Just paste the script's contents into the editor, yank this into a +# register (starting at '0') and run the macro once for each line of the +# original script: +# +# 0i -e :s/\$/$$/eg:s/'/'"'"'/eg^Ela'A' \:nohj + +# don't call this directly - it is here to avoid calling wildcard more than +# once in remove-files. +remove-files-helper = $(if $1,$(RM) $1,:) + +# $(call remove-files,file1 file2) +remove-files = $(call remove-files-helper,$(wildcard $1)) + +# Removes all cleanable files in the given list +# $(call clean-files,file1 file2 file3 ...) +# Works exactly like remove-files, but filters out files in $(neverclean) +clean-files = \ + $(call remove-files-helper,$(call cleanable-files,$(wildcard $1))) + +# This removes files without checking whether they are there or not. This +# sometimes has to be used when the file is created by a series of shell +# commands, but there ends up being a race condition: make doesn't know about +# the file generation as quickly as the system does, so $(wildcard ...) doesn't +# work right. Blech. +# $(call remove-temporary-files,filenames) +remove-temporary-files = $(if $1,$(RM) $1,:) + +# Create an identifier from a file name +# $(call cleanse-filename,filename) +cleanse-filename = $(subst .,_,$(subst /,__,$1)) + +# Escape dots +# $(call escape-dots,str) +escape-dots = $(subst .,\\.,$1) + +# Test that a file exists +# $(call test-exists,file) +test-exists = [ -e '$1' ] + +# Copy file1 to file2 only if file2 doesn't exist or they are different +# $(call copy-if-different,sfile,dfile) +copy-if-different = $(call test-different,$1,$2) && $(CP) '$1' '$2' +copy-if-exists = $(call test-exists,$1) && $(CP) '$1' '$2' +move-if-different = $(call test-different,$1,$2) && $(MV) '$1' '$2' +replace-if-different-and-remove = \ + $(call test-different,$1,$2) \ + && $(MV) '$1' '$2' \ + || $(call remove-files,'$1') + +# Note that $(DIFF) returns success when the files are the SAME.... +# $(call test-different,sfile,dfile) +test-different = ! $(DIFF) -q '$1' '$2' >/dev/null 2>&1 +test-exists-and-different = \ + $(call test-exists,$2) && $(call test-different,$1,$2) + +# Return value 1, or value 2 if value 1 is empty +# $(call get-default,<possibly empty arg>,<default value if empty>) +get-default = $(if $1,$1,$2) + +# Copy a file and log what's going on +# $(call copy-with-logging,<source>,<target>) +define copy-with-logging +if [ -d '$2/' ]; then \ + if $(CP) '$1' '$2/'; then \ + $(ECHO) "$(C_INFO)Copied '$1' to '$2/'$(C_RESET)"; \ + else \ + $(ECHO) "$(C_ERROR)Failed to copy '$1' to '$2/'$(C_RESET)"; \ + fi; \ +fi +endef + +# Gives a reassuring message about the failure to find include files +# $(call include-message,<list of include files>) +define include-message +$(strip \ +$(if $(filter-out $(wildcard $1),$1),\ + $(shell $(ECHO) \ + "$(C_INFO)NOTE: You may ignore warnings about the"\ + "following files:" >&2;\ + $(ECHO) >&2; \ + $(foreach s,$(filter-out $(wildcard $1),$1),$(ECHO) ' $s' >&2;)\ + $(ECHO) "$(C_RESET)" >&2) +)) +endef +# Characters that are hard to specify in certain places +space := $(empty) $(empty) +colon := \: +comma := , + +# Useful shell definitions +sh_true := : +sh_false := ! : + +# Clear out the standard interfering make suffixes +.SUFFIXES: + +# Turn off forceful rm (RM is usually mapped to rm -f) +ifdef SAFE_RM +RM := rm +endif + +# Turn command echoing back on with VERBOSE=1 +ifndef VERBOSE +QUIET := @ +endif + +# Turn on shell debugging with SHELL_DEBUG=1 +# (EVERYTHING is echoed, even $(shell ...) invocations) +ifdef SHELL_DEBUG +SHELL += -x +endif + +# Get the name of this makefile (always right in 3.80, often right in 3.79) +# This is only really used for documentation, so it isn't too serious. +ifdef MAKEFILE_LIST +this_file := $(word $(words $(MAKEFILE_LIST)),$(MAKEFILE_LIST)) +else +this_file := $(wildcard GNUmakefile makefile Makefile) +endif + +# Terminal color definitions + +ifdef NO_COLOR +tput = +else +tput = $(shell $(TPUT) $1) +endif + +black := $(call tput,setaf 0) +red := $(call tput,setaf 1) +green := $(call tput,setaf 2) +yellow := $(call tput,setaf 3) +blue := $(call tput,setaf 4) +magenta := $(call tput,setaf 5) +cyan := $(call tput,setaf 6) +white := $(call tput,setaf 7) +bold := $(call tput,bold) +uline := $(call tput,smul) +reset := $(call tput,sgr0) + +# +# User-settable definitions +# +LATEX_COLOR_WARNING ?= magenta +LATEX_COLOR_ERROR ?= red +LATEX_COLOR_INFO ?= green +LATEX_COLOR_UNDERFULL ?= magenta +LATEX_COLOR_OVERFULL ?= red bold +LATEX_COLOR_PAGES ?= bold +LATEX_COLOR_BUILD ?= blue +LATEX_COLOR_GRAPHIC ?= yellow +LATEX_COLOR_DEP ?= green +LATEX_COLOR_SUCCESS ?= green bold +LATEX_COLOR_FAILURE ?= red bold + +# Gets the real color from a simple textual definition like those above +# $(call get-color,ALL_CAPS_COLOR_NAME) +# e.g., $(call get-color,WARNING) +get-color = $(subst $(space),,$(foreach c,$(LATEX_COLOR_$1),$($c))) + +# +# STANDARD COLORS +# +C_WARNING := $(call get-color,WARNING) +C_ERROR := $(call get-color,ERROR) +C_INFO := $(call get-color,INFO) +C_UNDERFULL := $(call get-color,UNDERFULL) +C_OVERFULL := $(call get-color,OVERFULL) +C_PAGES := $(call get-color,PAGES) +C_BUILD := $(call get-color,BUILD) +C_GRAPHIC := $(call get-color,GRAPHIC) +C_DEP := $(call get-color,DEP) +C_SUCCESS := $(call get-color,SUCCESS) +C_FAILURE := $(call get-color,FAILURE) +C_RESET := $(reset) + +# +# PRE-BUILD TESTS +# + +# Check that clean targets are not combined with other targets (weird things +# happen, and it's not easy to fix them) +hascleangoals := $(if $(sort $(filter clean clean-%,$(MAKECMDGOALS))),1) +hasbuildgoals := $(if $(sort $(filter-out clean clean-%,$(MAKECMDGOALS))),1) +ifneq "$(hasbuildgoals)" "" +ifneq "$(hascleangoals)" "" +$(error $(C_ERROR)Clean and build targets specified together$(C_RESET))) +endif +endif + +# +# VARIABLE DECLARATIONS +# + +# Names of sed scripts that morph gnuplot files -- only the first found is used +GNUPLOT_SED := global-gpi.sed gnuplot.sed +GNUPLOT_GLOBAL := global._include_.gpi gnuplot.global + +# Files of interest +all_files.tex ?= $(wildcard *.tex) +all_files.tex.sh ?= $(wildcard *.tex.sh) +all_files.rst ?= $(wildcard *.rst) +all_files.fig ?= $(wildcard *.fig) +all_files.gpi ?= $(wildcard *.gpi) +all_files.dot ?= $(wildcard *.dot) +all_files.xvg ?= $(wildcard *.xvg) +all_files.svg ?= $(wildcard *.svg) +all_files.png ?= $(wildcard *.png) +all_files.eps.gz ?= $(wildcard *.eps.gz) +all_files.eps ?= $(wildcard *.eps) + +# Utility function for obtaining all files not specified in $(neverclean) +# $(call cleanable-files,file1 file2 file3 ...) +# Returns the list of files that is not in $(wildcard $(neverclean)) +cleanable-files = $(filter-out $(wildcard $(neverclean)), $1) + +# Utility function for getting all .$1 files that are to be ignored +# * files listed in $(includes.$1) +# * files not listed in $(onlysources.$1) if it is defined +ignore_files = \ + $(includes.$1) \ + $(if $(onlysources.$1),$(filter-out $(onlysources.$1), $(all_files.$1))) + +# Patterns to never be allowed as source targets +ignore_patterns := %._include_ + +# Patterns allowed as source targets but not included in 'all' builds +nodefault_patterns := %._nobuild_ $(ignore_patterns) + +# Utility function for getting targets suitable building +# $(call filter-buildable,suffix) +filter-buildable = \ + $(filter-out $(call ignore_files,$1) \ + $(addsuffix .$1,$(ignore_patterns)),$(all_files.$1)) + +# Utility function for getting targets suitable for 'all' builds +# $(call filter-default,suffix) +filter-default = \ + $(filter-out $(call ignore_files,$1) \ + $(addsuffix .$1,$(nodefault_patterns)),$(all_files.$1)) + +# Top level sources that can be built even when they are not by default +files.tex := $(filter-out %._gray_.tex,$(call filter-buildable,tex)) +files.tex.sh := $(call filter-buildable,tex.sh) +files.rst := $(call filter-buildable,rst) +files.gpi := $(call filter-buildable,gpi) +files.dot := $(call filter-buildable,dot) +files.fig := $(call filter-buildable,fig) +files.xvg := $(call filter-buildable,xvg) +files.svg := $(call filter-buildable,svg) +files.png := $(call filter-buildable,png) +files.eps.gz := $(call filter-buildable,eps.gz) + +# Make all pstex targets secondary. The pstex_t target requires the pstex +# target, and nothing else really depends on it, so it often gets deleted. +# This avoids that by allowing *all* fig files to be pstex targets, which is +# perfectly valid and causes no problems even if they're going to become eps +# files in the end. +.SECONDARY: $(patsubst %.fig,%.pstex,$(files.fig)) +.SECONDARY: $(patsubst %.fig,%._gray_.pstex,$(files.fig)) + +# Top level sources that are built by default targets +default_files.tex := $(filter-out %._gray_.tex,$(call filter-default,tex)) +default_files.tex.sh := $(call filter-default,tex.sh) +default_files.rst := $(call filter-default,rst) +default_files.gpi := $(call filter-default,gpi) +default_files.dot := $(call filter-default,dot) +default_files.fig := $(call filter-default,fig) +default_files.xvg := $(call filter-default,xvg) +default_files.svg := $(call filter-default,svg) +default_files.png := $(call filter-default,png) +default_files.eps.gz := $(call filter-default,eps.gz) + +# Utility function for creating larger lists of files +# $(call concat-files,suffixes,[prefix]) +concat-files = $(foreach s,$1,$($(if $2,$2_,)files.$s)) + +# Useful file groupings +all_files_source := $(call concat-files,tex,all) +all_files_scripts := $(call concat-files,tex.sh rst,all) +all_files_graphics := $(call concat-files,fig gpi eps.gz xvg svg png dot,all) + +default_files_source := $(call concat-files,tex,default) +default_files_scripts := $(call concat-files,tex.sh rst,default) +default_files_graphics := $(call concat-files,fig gpi eps.gz xvg svg png dot,default) + +files_source := $(call concat-files,tex) +files_scripts := $(call concat-files,tex.sh rst) +files_graphics := $(call concat-files,fig gpi eps.gz xvg svg png dot) + +# Utility function for obtaining stems +# $(call get-stems,suffix,[prefix]) +get-stems = $(sort $($(if $2,$2_,)files.$1:%.$1=%)) + +# List of all stems (including ._include_ and ._nobuild_ file stems) +all_stems.tex := $(call get-stems,tex,all) +all_stems.tex.sh := $(call get-stems,tex.sh,all) +all_stems.rst := $(call get-stems,rst,all) +all_stems.fig := $(call get-stems,fig,all) +all_stems.gpi := $(call get-stems,gpi,all) +all_stems.dot := $(call get-stems,dot,all) +all_stems.xvg := $(call get-stems,xvg,all) +all_stems.svg := $(call get-stems,svg,all) +all_stems.png := $(call get-stems,png,all) +all_stems.eps.gz := $(call get-stems,eps.gz,all) +all_stems.eps := $(call get-stems,eps,all) + +# List of all default stems (all default PDF targets): +default_stems.tex := $(call get-stems,tex,default) +default_stems.tex.sh := $(call get-stems,tex.sh,default) +default_stems.rst := $(call get-stems,rst,default) +default_stems.fig := $(call get-stems,fig,default) +default_stems.gpi := $(call get-stems,gpi,default) +default_stems.dot := $(call get-stems,dot,default) +default_stems.xvg := $(call get-stems,xvg,default) +default_stems.svg := $(call get-stems,svg,default) +default_stems.png := $(call get-stems,png,default) +default_stems.eps.gz := $(call get-stems,eps.gz,default) + +# List of all stems (all possible bare PDF targets created here): +stems.tex := $(call get-stems,tex) +stems.tex.sh := $(call get-stems,tex.sh) +stems.rst := $(call get-stems,rst) +stems.fig := $(call get-stems,fig) +stems.gpi := $(call get-stems,gpi) +stems.dot := $(call get-stems,dot) +stems.xvg := $(call get-stems,xvg) +stems.svg := $(call get-stems,svg) +stems.png := $(call get-stems,png) +stems.eps.gz := $(call get-stems,eps.gz) + +# Utility function for creating larger lists of stems +# $(call concat-stems,suffixes,[prefix]) +concat-stems = $(sort $(foreach s,$1,$($(if $2,$2_,)stems.$s))) + +all_stems_source := $(call concat-stems,tex,all) +all_stems_script := $(call concat-stems,tex.sh rst,all) +all_stems_graphic := $(call concat-stems,fig gpi eps.gz xvg svg png dot,all) +all_stems_gray_graphic := $(addsuffix ._gray_,\ + $(all_stems_graphic) $(all_stems.eps) \ + ) +all_stems_gg := $(sort \ + $(all_stems_graphic) $(all_stems_gray_graphic)) +all_stems_ss := $(sort $(all_stems_source) $(all_stems_script)) +all_stems_gray := $(addsuffix ._gray_,$(all_stems_ss)) +all_stems_sg := $(sort $(all_stems_script) $(all_stems_gray)) +all_stems_ssg := $(sort $(all_stems_ss) $(all_stems_gray)) + +default_stems_source := $(call concat-stems,tex,default) +default_stems_script := $(call concat-stems,tex.sh rst,default) +default_stems_graphic := $(call concat-stems,fig gpi eps.gz xvg svg png dot,default) +default_stems_gray_graphic := $(addsuffix ._gray_,$(default_stems_graphic)) +default_stems_gg := $(sort \ + $(default_stems_graphic) $(default_stems_gray_graphic)) +default_stems_ss := $(sort \ + $(default_stems_source) $(default_stems_script)) +default_stems_gray := $(addsuffix ._gray_,$(default_stems_ss)) +default_stems_sg := $(sort $(default_stems_script) $(default_stems_gray)) +default_stems_ssg := $(sort $(default_stems_ss) $(default_stems_gray)) + +stems_source := $(call concat-stems,tex) +stems_script := $(call concat-stems,tex.sh rst) +stems_graphic := $(call concat-stems,fig gpi eps.gz xvg svg png dot) +stems_gray_graphic := $(addsuffix ._gray_,\ + $(stems_graphic) $(all_stems.eps)) +stems_gg := $(sort $(stems_graphic) $(stems_gray_graphic)) +stems_ss := $(sort $(stems_source) $(stems_script)) +stems_gray := $(addsuffix ._gray_,$(stems_ss)) +stems_sg := $(sort $(stems_script) $(stems_gray)) +stems_ssg := $(sort $(stems_ss) $(stems_gray)) + +# Calculate names that can generate the need for an include file. We can't +# really do this with patterns because it's too easy to screw up, so we create +# an exhaustive list. +allowed_source_suffixes := \ + pdf \ + ps \ + dvi \ + ind \ + bbl \ + aux \ + aux.make \ + d \ + tex \ + auxbbl.make \ + _graphics \ + _show +allowed_source_patterns := $(addprefix %.,$(allowed_source_suffixes)) + +allowed_graphic_suffixes := \ + eps \ + gpihead.make \ + gpi.d +allowed_graphic_patterns := $(addprefix %.,$(allowed_graphic_suffixes)) + +# All targets allowed to build documents +allowed_source_targets := \ + $(foreach suff,$(allowed_source_suffixes),\ + $(addsuffix .$(suff),$(stems_ssg))) + +# All targets allowed to build graphics +allowed_graphic_targets := \ + $(foreach suff,$(allowed_graphic_suffixes),\ + $(addsuffix .$(suff),$(stems_gg))) + +# All targets that build multiple documents (like 'all') +allowed_batch_source_targets := \ + all \ + all-pdf \ + all-ps \ + all-dvi \ + all-bbl \ + all-ind \ + show + +# All targets that build multiple graphics (independent of document) +allowed_batch_graphic_targets := \ + all-graphics \ + all-pstex \ + all-dot2tex \ + all-gray-pstex \ + show-graphics + +# Now we figure out which stuff is available as a make target for THIS RUN. +real_goals := $(call get-default,$(filter-out _includes,$(MAKECMDGOALS)),\ + all) + +specified_source_targets := $(strip \ + $(filter $(allowed_source_targets) $(stems_ssg),$(real_goals)) \ + ) + +specified_batch_source_targets := $(strip \ + $(filter $(allowed_batch_source_targets),$(real_goals)) \ + ) + +specified_graphic_targets := $(strip \ + $(filter $(allowed_graphic_targets),$(real_goals)) \ + ) + +specified_batch_graphic_targets := $(strip \ + $(filter $(allowed_batch_graphic_targets),$(real_goals)) \ + ) + +specified_gpi_targets := $(patsubst %.gpi,%.eps,\ + $(filter $(patsubst %.eps,%.gpi,$(specified_graphic_targets)),\ + $(all_files.gpi)) \ + ) + +# Determine which .d files need including from the information gained above. +# This is done by first checking whether a batch target exists. If it does, +# then all *default* stems are used to create possible includes (nobuild need +# not apply for batch status). If no batch targets exist, then the individual +# targets are considered and appropriate includes are taken from them. +source_stems_to_include := \ + $(sort\ + $(if $(specified_batch_source_targets),\ + $(default_stems_ss),\ + $(foreach t,$(specified_source_targets),\ + $(foreach p,$(allowed_source_patterns),\ + $(patsubst $p,%,$(filter $p $(stems_ssg),$t)) \ + )) \ + )) + +# Determine which .gpi.d files are needed using the above information. We +# first check whether a batch target is specified, then check individual +# graphics that may have been specified. +graphic_stems_to_include := \ + $(sort\ + $(if $(specified_batch_graphic_targets),\ + $(default_stems.gpi),\ + $(foreach t,$(specified_gpi_targets),\ + $(foreach p,$(allowed_graphic_patterns),\ + $(patsubst $p,%,$(filter $p,$t)) \ + )) \ + )) + +# All dependencies for the 'all' targets +all_pdf_targets := $(addsuffix .pdf,$(stems_ssg)) +all_ps_targets := $(addsuffix .ps,$(stems_ssg)) +all_dvi_targets := $(addsuffix .dvi,$(stems_ssg)) +all_tex_targets := $(addsuffix .tex,$(stems_sg)) +all_d_targets := $(addsuffix .d,$(stems_ssg)) +all_graphics_targets := $(addsuffix .eps,$(stems_gg)) +all_pstex_targets := $(addsuffix .pstex_t,$(stems.fig)) +all_gray_pstex_targets := $(addsuffix ._gray_.pstex_t,$(stems.fig)) +all_dot2tex_targets := $(addsuffix .dot_t,$(stems.dot)) + +all_known_graphics := $(sort $(all_graphics_targets) $(wildcard *.eps)) + +default_pdf_targets := $(addsuffix .pdf,$(default_stems_ss)) +default_ps_targets := $(addsuffix .ps,$(default_stems_ss)) +default_dvi_targets := $(addsuffix .dvi,$(default_stems_ss)) + +# Extensions generated by LaTeX invocation that can be removed when complete +rm_ext := \ + log aux dvi ps pdf blg bbl out nav snm toc lof lot lol pfg fls vrb \ + idx ind ilg lox +backup_patterns := *~ *.bak *.backup + +graph_stem := _graph + +# All LaTeX-generated files that can be safely removed + +rm_tex := \ + $(foreach e,$(rm_ext),$(addsuffix .$e,$(all_stems_source))) \ + $(foreach e,$(rm_ext) tex,$(addsuffix .$e,$(all_stems_sg))) \ + $(addsuffix .log,$(all_ps_targets) $(all_pdf_targets)) \ + $(addsuffix .*.log,$(stems_graphic)) + +# These are the files that will affect .gpi transformation for all .gpi files. +# +# Use only the first one found. Backward compatible values are at the end. +# Note that we use foreach, even though wildcard also returns a list, to ensure +# that the order in the uppercase variables is preserved. Directory listings +# provide no such guarantee, so we avoid relying on them. +gpi_sed := $(strip \ + $(firstword $(foreach f,$(GNUPLOT_SED),$(wildcard $f)))) +gpi_global := $(strip \ + $(firstword $(foreach f,$(GNUPLOT_GLOBAL),$(wildcard $f)))) + +# +# Functions used in generating output +# + +# Outputs all source dependencies to stdout. The first argument is the file to +# be parsed, the second is a list of files that will show up as dependencies in +# the new .d file created here. +# +# NOTE: BSD sed does not understand \|, so we have to do something more +# clunky to extract suitable extensions. +# +# $(call get-inputs,<parsed file>,<target files>) +define get-inputs +$(SED) \ +-e '/^INPUT/!d' \ +-e 's!^INPUT \(\./\)\{0,1\}!$2: !' \ +-e '/\.tex$$/p' \ +-e '/\.cls$$/p' \ +-e '/\.sty$$/p' \ +-e '/\.pstex_t$$/p' \ +-e '/\.dot_t$$/p' \ +-e 'd' \ +$1 | $(SORT) | $(UNIQ) +endef + +# Outputs all of the graphical dependencies to stdout. The first argument is +# the stem of the source file being built, the second is a list of suffixes +# that will show up as dependencies in the generated .d file. +# +# $(call get-graphics,<parsed file>,<target files>) +define get-graphics +$(SED) \ +-e '/^File:/!d' \ +-e 'N' \ +-e 's/\n//g' \ +-e '/Graphic file/!d' \ +-e 's/^File: //' \ +-e 's/ Graphic.*$$//' \ +-e '/^\(.*\)\(\.[^.]*\)$$/{' \ +-e 's//$2: \1\2/' \ +-e 'p' \ +-e 's/[^:]*: \(.*\)\(\.[^.]*\)$$/-include \1.gpi.d/' \ +-e 'p' \ +-e 'd' \ +-e '}' \ +$1 | $(SORT) | $(UNIQ) +endef + +# Checks for build failure due to pstex inclusion, and gives instructions. +# +# $(call die-on-pstexs,<parsed file>) +define die-on-pstexs +if $(EGREP) -q '^! LaTeX Error: File .*\.pstex.* not found' $1; then \ + $(ECHO) "$(C_ERROR)Missing pstex_t file(s)$(C_RESET)"; \ + $(ECHO) "$(C_ERROR)Please run$(C_RESET)"; \ + $(ECHO) "$(C_ERROR) make all-pstex$(C_RESET)"; \ + $(ECHO) "$(C_ERROR)before proceeding.$(C_RESET)"; \ + exit 1; \ +fi +endef + +# Checks for build failure due to dot2tex, and gives instructions. +# +# $(call die-on-dot2tex,<parsed file>) +define die-on-dot2tex +if $(EGREP) -q '^! LaTeX Error: File .*\.dot_t.* not found' $1; then \ + $(ECHO) "$(C_ERROR)Missing dot_t file(s)$(C_RESET)"; \ + $(ECHO) "$(C_ERROR)Please run$(C_RESET)"; \ + $(ECHO) "$(C_ERROR) make all-dot2tex$(C_RESET)"; \ + $(ECHO) "$(C_ERROR)before proceeding.$(C_RESET)"; \ + exit 1; \ +fi +endef + +# Outputs all index files to stdout. Arg 1 is the source stem, arg 2 is the +# list of targets for the discovered dependency. +# +# $(call get-inds,<parsed file>,<target files>) +define get-inds +$(SED) \ +-e 's/^No file \(.*\)\.ind\.$$/$2: \1.ind/p' \ +-e 'd' \ +$1 | $(SORT) | $(UNIQ) +endef + + +# Outputs all bibliography files to stdout. Arg 1 is the source stem, arg 2 is +# a list of targets for each dependency found. +# +# The script kills all lines that do not contain bibdata. Remaining lines have +# the \bibdata macro and delimiters removed to create a dependency list. A +# trailing comma is added, then all adjacent commas are collapsed into a single +# comma. Then commas are replaced with the string .bib[space], and the +# trailing space is killed off. This produces a list of space-delimited .bib +# filenames, which is what the make dep file expects to see. +# +# $(call get-bibs,<aux file>,<targets>) +define get-bibs +$(SED) \ +-e '/^\\bibdata/!d' \ +-e 's/\\bibdata{\([^}]*\)}/\1,/' \ +-e 's/,\{2,\}/,/g' \ +-e 's/,/.bib /g' \ +-e 's/ \{1,\}$$//' \ +$1 | $(XARGS) $(KPSEWHICH) - | \ +$(SED) \ +-e 's/^/$2: /' | \ +\$(SORT) | $(UNIQ) +endef + +# Makes a an aux file that only has stuff relevant to the dvi in it +# $(call make-auxdvi-file,<flattened-aux>,<new-aux>) +define make-auxdvi-file +$(SED) \ +-e '/^\\newlabel/!d' \ +$1 > $2 +endef + +# Makes an aux file that only has stuff relevant to the bbl in it +# $(call make-auxbbl-file,<flattened-aux>,<new-aux>) +define make-auxbbl-file +$(SED) \ +-e '/^\\newlabel/d' \ +$1 > $2 +endef + +# Makes a .gpi.d file from a .gpi file +# $(call make-gpi-d,<.gpi>,<.gpi.d>) +define make-gpi-d +$(ECHO) '# vim: ft=make' > $2; \ +$(ECHO) 'ifndef INCLUDED_$(call cleanse-filename,$2)' >> $2; \ +$(ECHO) 'INCLUDED_$(call cleanse-filename,$2) = 1' >> $2; \ +$(call get-gpi-deps,$1,$(addprefix $(2:%.gpi.d=%).,eps gpi.d)) >> $2; \ +$(ECHO) 'endif' >> $2; +endef + +# Parse .gpi files for data and loaded dependencies, output to stdout +# +# The sed script here tries to be clever about obtaining valid +# filenames from the gpi file. It assumes that the plot command starts its own +# line, which is not too difficult a constraint to satisfy. +# +# This command script also generates 'include' directives for every 'load' +# command in the .gpi file. The load command must appear on a line by itself +# and the file it loads must have the suffix .gpi. If you don't want it to be +# compiled when running make graphics, then give it a suffix of ._include_.gpi. +# +# $(call get-gpi-deps,<gpi file>,<targets>) +define get-gpi-deps +$(SED) \ +-e '/^[[:space:]]*s\{0,1\}plot/,/[^\\]$$/{' \ +-e ' H' \ +-e ' /[^\\]$$/{' \ +-e ' s/.*//' \ +-e ' x' \ +-e ' s/\\\{0,1\}\n//g' \ +-e ' s/^[[:space:]]*s\{0,1\}plot[[:space:]]*\(\[[^]]*\][[:space:]]*\)*/,/' \ +-e ' s/[[:space:]]*\(['\''"][^'\''"]*['\''"]\)\{0,1\}[^,]*/\1/g' \ +-e ' s/,['\''"]-\{0,1\}['\''"]//g' \ +-e ' s/[,'\''"]\{1,\}/ /g' \ +-e ' s!.*!$2: &!' \ +-e ' p' \ +-e ' }' \ +-e ' d' \ +-e '}' \ +-e 's/^[[:space:]]*load[[:space:]]*['\''"]\([^'\''"]*\.gpi\)['\''"].*$$/-include \1.d/p' \ +-e 'd' \ +$1 +endef + +# Colorizes real, honest-to-goodness LaTeX errors that can't be overcome with +# recompilation. +# +# Note that we only ignore file not found errors for things that we know how to +# build, like graphics files. +# +# $(call colorize-latex-errors,<log file>) +define colorize-latex-errors +$(SED) \ +-e '/^! LaTeX Error: File .*eps'"'"' not found\.$$/d' \ +-e '/^! LaTeX Error: Cannot determine size/d' \ +-e '/^! /,/^$$/{' \ +-e ' H' \ +-e ' /^$$/{' \ +-e ' x' \ +-e ' s/^.*$$/$(C_ERROR)&$(C_RESET)/' \ +-e ' p' \ +-e ' }' \ +-e '}' \ +-e 'd' \ +$1 +endef + +# Colorize Makeindex errors +define colorize-makeindex-errors +$(SED) \ +-e '/^!! /{' \ +-e ' N' \ +-e ' s/^.*$$/$(C_ERROR)&$(C_RESET)/' \ +-e ' p' \ +-e '}' \ +-e 'd' \ +$1 +endef + +# Colorize GNUplot errors +# +# $(call colorize-gnuplot-errors,<log file>) +define colorize-gnuplot-errors +$(SED) \ +-e '/^gnuplot>/,/^$$/{' \ +-e ' s/^gnuplot.*/$(C_ERROR)&/' \ +-e ' s/^$$/$(C_RESET)/' \ +-e ' p' \ +-e '}' \ +-e 'd' \ +$1 +endef + +# Colorize GraphViz errors +# +# $(call colorize-dot-errors,<log file>) +define colorize-dot-errors +$(SED) \ +-e '/^Error:/,/context:/s/.*/$(C_ERROR)&$(C_RESET)/p' \ +-e 's/^Warning:.*/$(C_WARNING)&$(C_RESET)/p' \ +-e 'd' \ +$1 +endef + +# Get all important .aux files from the top-level .aux file and merges them all +# into a single file, which it outputs to stdout. +# +# $(call flatten-aux,<toplevel aux>,<output file>) +define flatten-aux +$(SED) \ +-e '/\\@input{\(.*\)}/{' \ +-e 's//\1/' \ +-e 's![.:]!\\&!g' \ +-e 'h' \ +-e 's!.*!\\:\\\\@input{&}:{!' \ +-e 'p' \ +-e 'x' \ +-e 's/\\././g' \ +-e 's/.*/r &/p' \ +-e 's/.*/d/p' \ +-e 's/.*/}/p' \ +-e 'd' \ +-e '}' \ +-e 'd' \ +'$1' > "$1.$$$$.sed.make"; \ +$(SED) -f "$1.$$$$.sed.make" '$1' > "$1.$$$$.make"; \ +$(SED) \ +-e '/^\\relax/d' \ +-e '/^\\bibcite/d' \ +-e 's/^\(\\newlabel{[^}]\{1,\}}\).*/\1/' \ +"$1.$$$$.make" | $(SORT) > '$2'; \ +$(call remove-temporary-files,$1.$$$$.make $1.$$$$.sed.make) +endef + +# Generate pdf from postscript +ps2pdf_normal := $(PS2PDF_NORMAL) +ps2pdf_embedded := \ + $(PS2PDF_EMBED) \ + -dPDFSETTINGS=/printer \ + -dEmbedAllFonts=true \ + -dSubsetFonts=true \ + -dMaxSubsetPct=100 + +# Colorize LaTeX output. +# This uses a neat trick from the Sed & Awk Book from O'Reilly: +# 1) Ensure that the last line of the file gets appended to the hold buffer, +# and blank it out to trigger end-of-paragraph logic below. +# 2) When encountering a blank line (LaTeX output helpfully breaks output on +# newlines) +# a) swap the hold buffer (containing the paragraph) into the pattern buffer (putting a blank line into the hold buffer), +# b) remove the newline at the beginning (don't ask), +# c) apply any colorizing substitutions necessary to ensure happiness. +# d) get the newline out of the hold buffer and append it +# e) profit! (print) +# 3) Anything not colorized is deleted, unless in verbose mode. +color_tex := \ + $(SED) \ + -e '$${' \ + -e ' /^$$/!{' \ + -e ' H' \ + -e ' s/.*//' \ + -e ' }' \ + -e '}' \ + -e '/^$$/!{' \ + -e ' H' \ + -e ' d' \ + -e '}' \ + -e '/^$$/{' \ + -e ' x' \ + -e ' s/^\n//' \ + -e ' /^Output written/{' \ + -e ' s/.*(\([^)]\{1,\}\)).*/Success! Wrote \1/' \ + -e ' s/[[:digit:]]\{1,\}/$(C_PAGES)&$(C_RESET)/g' \ + -e ' s/Success!/$(C_SUCCESS)&$(C_RESET)/g' \ + -e ' b end' \ + -e ' }' \ + -e ' /^! *LaTeX Error:.*/{' \ + -e ' s//$(C_ERROR)&$(C_RESET)/' \ + -e ' b end' \ + -e ' }' \ + -e ' /^.*Warning:.*/{' \ + -e ' s//$(C_WARNING)&$(C_RESET)/' \ + -e ' b end' \ + -e ' }' \ + -e ' /^Underfull.*/{' \ + -e ' s//$(C_UNDERFULL)&$(C_RESET)/' \ + -e ' b end' \ + -e ' }' \ + -e ' /^Overfull.*/{' \ + -e ' s//$(C_OVERFULL)&$(C_RESET)/' \ + -e ' b end' \ + -e ' }' \ + $(if $(VERBOSE),,-e ' d') \ + -e ' :end' \ + -e ' G' \ + -e '}' \ + +# Colorize BibTeX output. +color_bib := \ + $(SED) \ + -e 's/^Warning--.*/$(C_WARNING)&$(C_RESET)/' -e 't' \ + -e '/---/,/^.[^:]/{' \ + -e ' H' \ + -e ' /^.[^:]/{' \ + -e ' x' \ + -e ' s/\n\(.*\)/$(C_ERROR)\1$(C_RESET)/' \ + -e ' p' \ + -e ' s/.*//' \ + -e ' h' \ + -e ' d' \ + -e ' }' \ + -e ' d' \ + -e '}' \ + -e '/(.*error.*)/s//$(C_ERROR)&$(C_RESET)/' \ + $(if $(VERBOSE),,-e 'd') + + +# Make beamer output big enough to print on a full page. Landscape doesn't +# seem to work correctly. +enlarge_beamer = $(PSNUP) -l -1 -W128mm -H96mm -pletter + +# $(call test-run-again,<source stem>) +test-run-again = $(EGREP) -q '^(.*Rerun .*|No file $1\.[^.]+\.)$$' $1.log + +# This tests whether the dvi target should be run at all, from viewing the log +# file. +# $(call test-log-for-need-to-run,<source stem>) +define test-log-for-need-to-run +$(SED) \ +-e '/^No file $(call escape-dots,$1)\.aux\./d' \ +$1.log \ +| $(EGREP) -q '^(.*Rerun .*|No file $1\.[^.]+\.|LaTeX Warning: File.*)$$' +endef + +# LaTeX invocations +# +# $(call latex,<tex file>,[<extra LaTeX args>]) +run-latex = $(LATEX) --interaction=batchmode $(if $2,$2,) $1 > /dev/null + +# $(call latex-color-log,<LaTeX stem>) +latex-color-log = $(color_tex) $1.log + +# $(call run-makeindex,<tex stem>) +define run-makeindex +success=1; \ +if ! $(MAKEINDEX) -q $1.idx > /dev/null || $(EGREP) -q '^!!' $1.ilg; then \ + $(call colorize-makeindex-errors,$1.ilg); \ + success=0; \ +fi; \ +[ "$$success" = "1" ] && $(sh_true) || $(sh_false); +endef + +# BibTeX invocations +# +# $(call run-bibtex,<tex stem>) +run-bibtex = $(BIBTEX) $1 | $(color_bib) + + +# $(call convert-gpi,<gpi file>,<eps file>,[gray]) +define convert-gpi +$(ECHO) 'set terminal postscript enhanced eps' \ +$(call get-default,$(strip \ +$(firstword \ + $(shell \ + $(SED) \ + -e 's/^\#\#FONTSIZE=\([[:digit:]]\{1,\}\)/\1/p' \ + -e 'd' \ + $1 $(strip $(gpi_global)) \ + ) \ +) \ +),22) \ +$(strip $(if $3,monochrome,$(if \ +$(shell $(EGREP) '^\#\#[[:space:]]*GRAY[[:space:]]*$$' $< $(gpi_global)),\ +,color))) > $1head.make; \ +$(ECHO) 'set output "$2"' >> $1head.make; \ +$(if $(gpi_global),$(CAT) $(gpi_global) >> $1head.make;,) \ +fnames='$1head.make $1';\ +$(if $(gpi_sed),\ + $(SED) -f '$(gpi_sed)' $$fnames > $1.temp.make; \ + fnames=$1.temp.make;,\ +) \ +success=1; \ +if ! $(GNUPLOT) $$fnames 2>$1.log; then \ + $(call colorize-gnuplot-errors,$1.log); \ + success=0; \ +fi; \ +$(if $(gpi_sed),$(call remove-temporary-files,$1.temp.make);,) \ +$(call remove-temporary-files,$1head.make); \ +[ "$$success" = "1" ] && $(sh_true) || $(sh_false); +endef + +# Creation of .eps files from .png files +# +# The intermediate step of PNM (using NetPBM) produces much nicer output than +# ImageMagick's "convert" binary. I couldn't get the right combination of +# flags to make it look nice, anyway. +# +# To handle gray scale conversion, we pipe things through ppmtopgm in the +# middle. +# +# $(call convert-png,<png file>,<eps file>) +define convert-png +$(PNGTOPNM) "$1" \ + $(if $3,| $(PPMTOPGM),) \ + | $(PNMTOPS) -noturn \ + > "$2" +endef + +# Creation of .eps files from .fig files +# $(call convert-fig,<fig file>,<eps file>,[gray]) +convert-fig = $(FIG2DEV) -L eps $(if $3,-N,) $1 $2 + +# Creation of .pstex files from .fig files +# $(call convert-fig-pstex,<fig file>,<pstex file>) +convert-fig-pstex = $(FIG2DEV) -L pstex $1 $2 > /dev/null 2>&1 + +# Creation of .pstex_t files from .fig files +# $(call convert-fig-pstex-t,<fig file>,<pstex file>,<pstex_t file>) +convert-fig-pstex-t = $(FIG2DEV) -L pstex_t -p $3 $1 $2 > /dev/null 2>&1 + +# Creation of .dot_t files from .dot files +# #(call convert-dot-tex,<dot file>,<dot_t file>) +convert-dot-tex = $(DOT2TEX) '$1' > '$2' + +# Creation of .tex files from .rst files +# TODO: Fix paper size so that it can be specified in the file itself +# $(call convert-rst,<rst file>,<tex file>) +rst_style_file=$(wildcard _rststyle_._include_.tex) +define convert-rst +$(RST2LATEX) \ + --documentoptions=letterpaper \ + $(if $(rst_style_file),--stylesheet=$(rst_style_file),) \ + $1 $2 +endef + +# Converts svg files into .eps files +# +# $(call convert-svg,<svg file>,<eps file>,[gray]) +convert-svg = $(INKSCAPE) --export-eps='$2' '$1' + +# Converts xvg files into .eps files +# +# $(call convert-xvg,<xvg file>,<eps file>,[gray]) +convert-xvg = $(XMGRACE) '$1' -printfile - -hardcopy -hdevice EPS $(if $3,| $(call kill-ps-color)) > '$2' + +# Converts .eps.gz files into .eps files +# +# $(call convert-epsgz,<eps.gz file>,<eps file>,[gray]) +convert-epsgz = $(GUNZIP) -c '$1' $(if $3,| $(call kill-ps-color)) > '$2' + +# Converts .eps files into .eps files (usually a no-op, but can make grayscale) +# +# $(call convert-eps,<in file>,<out file>,[gray]) +convert-eps = $(if $3,$(call kill-ps-color) $1 > $2) + +# The name of the file containing special postscript commands for grayscale +gray_eps_file := gray.eps.make + +# Changes sethsbcolor and setrgbcolor calls in postscript to always produce +# grayscale. In general, this is accomplished by writing new versions of those +# functions into the user dictionary space, which is looked up before the +# global or system dictionaries (userdict is one of the permanent dictionaries +# in postscript and is not read-only like systemdict). +# +# For setrgbcolor, the weighted average of the triple is computed and the +# triple is replaced with three copies of that average before the original +# procedure is called: .299R + .587G + .114B +# +# For sethsbcolor, the color is first converted to RGB, then to grayscale by +# the new setrgbcolor operator as described above. Why is this done? +# Because simply using the value component will tend to make pure colors +# white, a very undesirable thing. Pure blue should not translate to white, +# but to some level of gray. Conversion to RGB does the right thing. It's +# messy, but it works. +# +# From +# http://en.wikipedia.org/wiki/HSV_color_space#Transformation_from_HSV_to_RGB, +# HSB = HSV (Value = Brightness), and the formula used to convert to RGB is +# as follows: +# +# Hi = int(floor(6 * H)) mod 6 +# f = 6 * H - Hi +# p = V(1-S) +# q = V(1-fS) +# t = V(1-(1-f)S) +# if Hi = 0: R G B <-- V t p +# if Hi = 1: R G B <-- q V p +# if Hi = 2: R G B <-- p V t +# if Hi = 3: R G B <-- p q V +# if Hi = 4: R G B <-- t p V +# if Hi = 5: R G B <-- V p q +# +# The messy stack-based implementation is below +# $(call create-gray-eps-file,filename) +define create-gray-eps-file +$(ECHO) -n -e '\ +/OLDRGB /setrgbcolor load def\n\ +/setrgbcolor {\n\ + .114 mul exch\n\ + .587 mul add exch\n\ + .299 mul add\n\ + dup dup\n\ + OLDRGB\n\ +} bind def\n\ +/OLDHSB /sethsbcolor load def\n\ +/sethsbcolor {\n\ + 2 index % H V S H\n\ + 6 mul floor cvi 6 mod % Hi V S H\n\ + 3 index % H Hi V S H\n\ + 6 mul % 6H Hi V S H\n\ + 1 index % Hi 6H Hi V S H\n\ + sub % f Hi V S H\n\ + 2 index 1 % 1 V f Hi V S H\n\ + 4 index % S 1 V f Hi V S H\n\ + sub mul % p f Hi V S H\n\ + 3 index 1 % 1 V p f Hi V S H\n\ + 6 index % S 1 V p f Hi V S H\n\ + 4 index % f S 1 V p f Hi V S H\n\ + mul sub mul % q p f Hi V S H\n\ + 4 index 1 1 % 1 1 V q p f Hi V S H\n\ + 5 index % f 1 1 V q p f Hi V S H\n\ + sub % (1-f) 1 V q p f Hi V S H\n\ + 8 index % S (1-f) 1 V q p f Hi V S H\n\ + mul sub mul % t q p f Hi V S H\n\ + 4 -1 roll pop % t q p Hi V S H\n\ + 7 -2 roll pop pop % t q p Hi V\n\ + 5 -2 roll % Hi V t q p\n\ + dup 0 eq\n\ + {1 index 3 index 6 index}\n\ + {\n\ + dup 1 eq\n\ + {3 index 2 index 6 index}\n\ + {\n\ + dup 2 eq\n\ + {4 index 2 index 4 index}\n\ + {\n\ + dup 3 eq\n\ + {4 index 4 index 3 index}\n\ + {\n\ + dup 4 eq\n\ + {2 index 5 index 3 index}\n\ + {\n\ + dup 5 eq\n\ + {1 index 5 index 5 index}\n\ + {0 0 0}\n\ + ifelse\n\ + }\n\ + ifelse\n\ + }\n\ + ifelse\n\ + }\n\ + ifelse\n\ + }\n\ + ifelse\n\ + }\n\ + ifelse % B G R Hi V t q p\n\ + setrgbcolor\n\ + 5 {pop} repeat\n\ +} bind def\n'\ +> $1 +endef + +# This actually inserts the color-killing code into a postscript file +# $(call kill-ps-color) +define kill-ps-color +$(SED) -e '/%%EndComments/r $(gray_eps_file)' +endef + +# Converts graphviz .dot files into .eps files +# Grayscale is not directly supported by dot, so we pipe it through fig2dev in +# that case. +# $(call convert-dot,<dot file>,<eps file>,<log file>,[gray]) +define convert-dot +$(DOT) -Tps '$1' 2>'$3' $(if $4,| $(call kill-ps-color)) > '$2'; \ +$(call colorize-dot-errors,$3) +endef + +# Convert DVI to Postscript +# $(call make-ps,<dvi file>,<ps file>,<log file>,[<paper size>]) +make-ps = \ + $(DVIPS) -o '$2' $(if $(filter-out BEAMER,$4),-t$(firstword $4),) '$1' \ + $(if $(filter BEAMER,$4),| $(enlarge_beamer)) > $3 2>&1 + +# Convert Postscript to PDF +# $(call make-pdf,<ps file>,<pdf file>,<log file>,<embed file>) +make-pdf = \ + $(if $(filter 1,$(shell $(CAT) '$4')),\ + $(ps2pdf_embedded),\ + $(ps2pdf_normal)) '$1' '$2' > $3 2>&1 + +# Display information about what is being done +# $(call echo-build,<output file>,[<run number>]) +echo-build = $(ECHO) "$(C_BUILD)= $1 --> $2$(if $3, ($3),) =$(C_RESET)" +echo-graphic = $(ECHO) "$(C_GRAPHIC)= $1 --> $2 =$(C_RESET)" +echo-dep = $(ECHO) "$(C_DEP)= $1 --> $2 =$(C_RESET)" + +# Display a list of something +# $(call echo-list,<values>) +echo-list = for x in $1; do $(ECHO) "$$x"; done + +# +# DEFAULT TARGET +# + +.PHONY: all +all: $(default_pdf_targets) ; + +.PHONY: all-pdf +all-pdf: $(default_pdf_targets) ; + +.PHONY: all-ps +all-ps: $(default_ps_targets) ; + +.PHONY: all-dvi +all-dvi: $(default_dvi_targets) ; + +# +# VIEWING TARGET +# +.PHONY: show +show: all + $(QUIET)for x in $(default_pdf_targets); do \ + [ -e "$$x" ] && $(VIEW_PDF) $$x & \ + done + +# +# INCLUDES +# +source_includes := $(addsuffix .d,$(source_stems_to_include)) +graphic_includes := $(addsuffix .gpi.d,$(graphic_stems_to_include)) + +# Include only the dependencies used +ifneq "" "$(source_includes)" +include $(source_includes)$(call include-message,$(source_includes)) +endif +ifneq "" "$(graphic_includes)" +include $(graphic_includes)$(call include-message,$(graphic_includes)) +endif + +# +# MAIN TARGETS +# + +%: %.pdf ; + +# This builds and displays the wanted file. +.PHONY: $(addsuffix ._show,$(stems_ssg)) +%._show: %.pdf + $(QUIET)$(VIEW_PDF) $< & + +.SECONDARY: $(all_pdf_targets) +%.pdf: %.ps %.embed.make + $(QUIET)$(call echo-build,$<,$@) + $(QUIET)$(call make-pdf,$<,$@.temp,$@.log,$*.embed.make); \ + if [ x"$$?" = x"0" ]; then \ + $(if $(VERBOSE),$(CAT) $@.log,:); \ + $(RM) -f '$@'; \ + $(MV) '$@.temp' '$@'; \ + $(TOUCH) '$@'; \ + $(call copy-with-logging,$@,$(BINARY_TARGET_DIR)); \ + else \ + $(CAT) $@.log; \ + $(call remove-temporary-files,'$@.temp'); \ + $(sh_false); \ + fi + +.SECONDARY: $(all_ps_targets) +%.ps: %.dvi %.paper.make + $(QUIET)$(call echo-build,$<,$@) + $(QUIET)$(call make-ps,$<,$@.temp,$@.log,\ + $(firstword $(shell $(CAT) $*.paper.make))); \ + if [ x"$$?" = x"0" ]; then \ + $(if $(VERBOSE),$(CAT) $@.log,:); \ + $(RM) -f '$@'; \ + $(MV) '$@.temp' '$@'; \ + $(TOUCH) '$@'; \ + $(call copy-with-logging,$@,$(BINARY_TARGET_DIR)); \ + else \ + $(CAT) $@.log; \ + $(call remove-temporary-files,'$@.temp'); \ + $(sh_false); \ + fi + +# Build the final dvi file. This is a very tricky rule because of the way that +# latex runs multiple times, needs graphics after the first run (or maybe +# already has them), and relies on bibliographies or indices that may not exist. +# +# Check the log for fatal errors. If they exist, colorize and bail. +# +# Create the .auxdvi.cookie file. (Needed for next time if not present) +# +# If any of the following are true, we must rebuild at least one time: +# +# * the .bbl was recently rebuilt +# +# check a cookie, then delete it +# +# * any of several output files was created or changed: +# +# check $*.run.cookie, then delete it +# +# * the .aux file changed in a way that necessitates attention +# +# Note that if the .auxdvi.make file doesn't exist, this means +# that we are doing a clean build, so it doesn't figure into the +# test for running again. +# +# compare against .auxdvi.make +# +# move if different, remove if not +# +# * the .log file has errors or warnings requiring at least one more run +# +# We use a loop over a single item to simplify the process of breaking +# out when we find one of the conditions to be true. +# +# If we do NOT need to run latex here, then we move the $@.1st.make file +# over to $@ because the .dvi file has already been built by the first +# dependency run and is valid. +# +# If we do, we delete that cookie file and do the normal multiple-runs +# routine. +# +.SECONDARY: $(all_dvi_targets) +%.dvi: %.bbl %.aux + $(QUIET)\ + fatal=`$(call colorize-latex-errors,$*.log)`; \ + if [ x"$$fatal" != x"" ]; then \ + $(ECHO) "$$fatal"; \ + exit 1; \ + fi; \ + $(call make-auxdvi-file,$*.aux.make,$*.auxdvi.cookie); \ + run=0; \ + for i in 1; do \ + if $(call test-exists,$*.bbl.cookie); then \ + run=1; \ + break; \ + fi; \ + if $(call test-exists,$*.run.cookie); then \ + run=1; \ + break; \ + fi; \ + if $(call \ + test-exists-and-different,$*.auxdvi.cookie,$*.auxdvi.make);\ + then \ + run=1; \ + break; \ + fi; \ + if $(call test-log-for-need-to-run,$*); then \ + run=1; \ + break; \ + fi; \ + done; \ + $(call remove-temporary-files,$*.bbl.cookie $*.run.cookie); \ + $(MV) $*.auxdvi.cookie $*.auxdvi.make; \ + if [ x"$$run" = x"1" ]; then \ + $(call remove-files,$@.1st.make); \ + for i in 2 3 4 5; do \ + $(if $(findstring 3.79,$(MAKE_VERSION)),\ + $(call echo-build,$*.tex,$@,$$$$i),\ + $(call echo-build,$*.tex,$@,$$i)\ + ); \ + $(call run-latex,$*); \ + $(call test-run-again,$*) || break; \ + done; \ + else \ + $(MV) $@.1st.make $@; \ + fi; \ + $(call copy-with-logging,$@,$(BINARY_TARGET_DIR)); \ + $(call latex-color-log,$*) + +# Build the .bbl file. When dependencies are included, this will (or will +# not!) depend on something.bib, which we detect, acting accordingly. The +# dependency creation also produces the %.auxbbl.make file. BibTeX is a bit +# finicky about what you call the actual files, but we can rest assured that if +# a .auxbbl.make file exists, then the .aux file does, as well. The +# .auxbbl.make file is a cookie indicating whether the .bbl needs to be +# rewritten. It only changes if the .aux file changes in ways relevant to .bbl +# creation. +# +# Note that we do NOT touch the .bbl file if there is no need to +# create/recreate it. We would like to leave existing files alone if they +# don't need to be changed, thus possibly avoiding a rebuild trigger on the +# .dvi side. +%.bbl: %.auxbbl.make + $(QUIET)\ + $(if $(filter %.bib,$^),\ + $(call echo-build,$(filter %.bib,$?) $*.aux,$@); \ + $(call run-bibtex,$*); \ + $(TOUCH) $@.cookie; \ + ) + +# Create the index file +%.ind: %.idx %.tex + $(QUIET)$(call echo-build,$<,$@) + $(QUIET)$(call run-makeindex,$*) +# +# SCRIPTED LaTeX TARGETS +# +.SECONDARY: $(all_tex_targets) +%.tex: %.tex.sh + $(QUIET)$(call echo-build,$<,$@) + $(QUIET)$(SHELL) $< $@ + +%.tex: %.rst $(rst_style_file) + $(QUIET)$(call echo-build,$<,$@) + $(QUIET)$(call convert-rst,$<,$@) + +# +# GRAYSCALE LaTeX TARGETS +# + +# Parse %.d to get all of the include files, then run sed to generate new files +# for all of them that depend on _gray. +%._gray_.tex: %.d %.tex + $(QUIET)$(call echo-build,$^,$@) + $(QUIET)\ + texstems=`$(SED) \ + -e 's/[^:]*:[[:space:]]*\(.*\)\.tex[[:space:]]*$$/\\1/p' \ + -e 'd' \ + $<`; \ + for f in $$texstems; do \ + $(SED) \ + -e 's/\.eps/._gray_&/' \ + -e 's/\.pstex/._gray_&/' \ + -e 's/\.pstex_t/._gray_&/' \ + -e 's/_include_/&._gray_/g' \ + $$f.tex > $$f._gray_.tex; \ + done; + +# +# GRAPHICS TARGETS +# +.PHONY: all-graphics +all-graphics: $(all_graphics_targets); + +.PHONY: all-pstex all-gray-pstex +all-pstex: $(all_pstex_targets); +all-gray-pstex: $(all_gray_pstex_targets); + +.PHONY: all-dot2tex +all-dot2tex: $(all_dot2tex_targets); + +.PHONY: show-graphics +show-graphics: all-graphics + $(VIEW_GRAPHICS) $(all_known_graphics) + +$(gray_eps_file): + $(QUIET)$(call echo-build,$^,$@) + $(QUIET)$(call create-gray-eps-file,$@) + +%._gray_.eps: %.gpi $(gpi_sed) + $(QUIET)$(call echo-graphic,$^,$@) + $(QUIET)$(call convert-gpi,$<,$@,1) + +%._gray_.eps: %.fig + $(QUIET)$(call echo-graphic,$^,$@) + $(QUIET)$(call convert-fig,$<,$@,1) + +%._gray_.eps: %.dot $(gray_eps_file) + $(QUIET)$(call echo-graphic,$^,$@) + $(QUIET)$(call convert-dot,$<,$@,$<.log,1) + +%._gray_.eps: %.xvg $(gray_eps_file) + $(QUIET)$(call echo-graphic,$^,$@) + $(QUIET)$(call convert-xvg,$<,$@,1) + +%._gray_.eps: %.svg $(gray_eps_file) + $(QUIET)$(call echo-graphic,$^,$@) + $(QUIET)$(call convert-svg,$<,$@,1) + +%._gray_.eps: %.png $(gray_eps_file) + $(QUIET)$(call echo-graphic,$^,$@) + $(QUIET)$(call convert-png,$<,$@,1) + +%._gray_.eps: %.eps.gz $(gray_eps_file) + $(QUIET)$(call echo-graphic,$^,$@) + $(QUIET)$(call convert-epsgz,$<,$@,1) + +%._gray_.eps: %.eps $(gray_eps_file) + $(QUIET)$(call echo-graphic,$^,$@) + $(QUIET)$(call convert-eps,$<,$@,1) + +%._gray_.pstex: %.fig + $(QUIET)$(call echo-graphic,$^,$@) + $(QUIET)$(call convert-fig-pstex,$<,$@,1) + +%._gray_.pstex_t: %.fig %._gray_.pstex + $(QUIET)$(call echo-graphic,$^,$@) + $(QUIET)$(call convert-fig-pstex-t,$<,$@,$*._gray_.pstex,1) + +%.eps: %.gpi $(gpi_sed) + $(QUIET)$(call echo-graphic,$^,$@) + $(QUIET)$(call convert-gpi,$<,$@,$(GRAY)) + +%.eps: %.fig + $(QUIET)$(call echo-graphic,$^,$@) + $(QUIET)$(call convert-fig,$<,$@,$(GRAY)) + +%.eps: %.dot $(if $(GRAY),$(gray_eps_file)) + $(QUIET)$(call echo-graphic,$^,$@) + $(QUIET)$(call convert-dot,$<,$@,$<.log,$(GRAY)) + +%.eps: %.xvg $(if $(GRAY),$(gray_eps_file)) + $(QUIET)$(call echo-graphic,$^,$@) + $(QUIET)$(call convert-xvg,$<,$@,$(GRAY)) + +%.eps: %.svg $(if $(GRAY),$(gray_eps_file)) + $(QUIET)$(call echo-graphic,$^,$@) + $(QUIET)$(call convert-svg,$<,$@,$(GRAY)) + +%.eps: %.png $(if $(GRAY),$(gray_eps_file)) + $(QUIET)$(call echo-graphic,$^,$@) + $(QUIET)$(call convert-png,$<,$@,$(GRAY)) + +%.eps: %.eps.gz $(if $(GRAY),$(gray_eps_file)) + $(QUIET)$(call echo-graphic,$^,$@) + $(QUIET)$(call convert-epsgz,$<,$@,$(GRAY)) + +%.pstex: %.fig + $(QUIET)$(call echo-graphic,$^,$@) + $(QUIET)$(call convert-fig-pstex,$<,$@,$(GRAY)) + +%.pstex_t: %.fig %.pstex + $(QUIET)$(call echo-graphic,$^,$@) + $(QUIET)$(call convert-fig-pstex-t,$<,$@,$*.pstex,$(GRAY)) + +%.dot_t: %.dot + $(QUIET)$(call echo-graphic,$^,$@) + $(QUIET)$(call convert-dot-tex,$<,$@) + +# +# DEPENDENCY-RELATED TARGETS. +# + +# Generate all of the information needed to get dependencies +# As a side effect, this creates a .dvi file. We need to be sure to remove it +# if there are errors. Errors can take several forms and all of them are found +# within the log file: +# * There was a LaTeX error +# * A needed file was not found +# * Cross references need adjustment +# +# Behavior: +# This rule is responsible for generating the following: +# %.aux +# %.d +# %.aux.make +# %.dvi.1st.make (the .dvi file, moved) +# +# Steps: +# +# Run latex +# Move .dvi somewhere else (make no judgements about success) +# Flatten the .aux file into another file +# Add source dependencies +# Add graphic dependencies +# Add bib dependencies +# +# Create cookies for various suffixes that may represent files that +# need to be read by LaTeX in order for it to function properly. +# +%.d %.aux %.aux.make: %.tex + $(QUIET)$(call echo-build,$<,$*.d $*.dvi,1) + $(QUIET)\ + $(call run-latex,$<,--recorder) || $(sh_true); \ + $(call die-on-pstexs,$*.log); \ + $(call die-on-dot2tex,$*.log); \ + $(MV) $*.dvi $*.dvi.1st.make; \ + $(call flatten-aux,$*.aux,$*.aux.make); \ + $(ECHO) "# vim: ft=make" > $*.d; \ + $(ECHO) ".PHONY: $*._graphics" >> $*.d; \ + $(call get-inputs,$*.fls,$(addprefix $*.,aux aux.make d dvi)) >> $*.d; \ + $(call get-graphics,$*.log,$(addprefix $*.,d dvi _graphics)) >> $*.d; \ + $(call get-inds,$*.log,$(addprefix $*.,d aux aux.make)) >> $*.d; \ + $(call get-bibs,$*.aux.make,$(addprefix $*.,bbl aux aux.make)) >> $*.d; \ + for s in toc out lot lof lol nav; do \ + if [ -e "$*.$$s" ]; then \ + if ! $(DIFF) -q $*.$$s $*.$$s.make 2>/dev/null; then \ + $(TOUCH) $*.run.cookie; \ + fi; \ + $(CP) $*.$$s $*.$$s.make; \ + fi; \ + done + +# This is a cookie that is updated if the flattened aux file has changed in a +# way that affects the bibliography generation. +.SECONDARY: $(addsuffix .auxbbl.make,$(stems_ssg)) +%.auxbbl.make: %.aux.make + $(QUIET)\ + $(call make-auxbbl-file,$<,$@.temp); \ + $(call replace-if-different-and-remove,$@.temp,$@) + +# Build a dependency file for .gpi files. These often plot data files that +# also reside in the directory, so if a data file changes, it's nice to know +# about it. This also handles loaded .gpi files, whose filename should have +# _include_. in it. +%._gray_.gpi.d: %.gpi + $(QUIET)$(call echo-build,$<,$@) + $(QUIET)$(call make-gpi-d,$<,$@) + +%.gpi.d: %.gpi + $(QUIET)$(call echo-build,$<,$@) + $(QUIET)$(call make-gpi-d,$<,$@) + +# Store the paper size for this document -- note that if beamer is used we set +# it to the special BEAMER paper size. We only do this, however, if the +# special comment exists, in which case we enlarge the output with psnup. +# +# The paper size is extracted from a documentclass attribute. +%.paper.make: %.tex + $(QUIET)$(SED) \ + -e '/\\documentclass/,/}/{' \ + -e ' s/%.*//' \ + -e ' H' \ + -e ' /}/{' \ + -e ' s/.*//' \ + -e ' x' \ + -e ' /\\documentclass/!d' \ + -e ' s/[\n[:space:]]*//g' \ + -e ' s/\([,{[]\)\([[:alnum:]]\{1,\}\)paper\([],}]\)/\1%-\2-%\3/g' \ + -e ' s/\([,{[]\)\(landscape\)\([],}]\)/\1%-\2-%\3/g' \ + -e ' s/^[^%]*%-//' \ + -e ' s/-%[^%]*$$//' \ + -e ' s/-%[^%]%-/ /g' \ + -e ' p' \ + -e ' }' \ + -e ' d' \ + -e '}' \ + -e 'd' \ + $< > $@; \ + $(EGREP) -q '^[^%]*\\documentclass[^{]*{beamer}' $< && \ + (\ + $(EGREP) -q '^%%[[:space:]]*BEAMER[[:space:]]*LARGE$$' $< && \ + $(ECHO) "BEAMER" > $@ || \ + : > $@ \ + ) || $(sh_true) + +# Store embedding instructions for this document using a special comment +%.embed.make: %.tex + $(QUIET)$(EGREP) '^%%[[:space:]]*NO[[:space:]]*EMBED[[:space:]]*$$' $< \ + && $(ECHO) '' > $@ \ + || $(ECHO) '1' > $@; + +# +# HELPFUL PHONY TARGETS +# + +.PHONY: _all_programs +_all_programs: + $(QUIET)$(ECHO) "== All External Programs Used ==" + $(QUIET)$(call output-all-programs) + +.PHONY: _check_programs +_check_programs: + $(QUIET)$(ECHO) "== Checking Makefile Dependencies =="; $(ECHO) + $(QUIET) \ + $(ECHO) hi; \ + allprogs=`\ + ($(call output-all-programs)) | \ + $(SED) \ + -e 's/^[[:space:]]*//' \ + -e '/^#/d' \ + -e 's/[[:space:]]*#.*//' \ + -e '/^=/s/[[:space:]]/_/g' \ + -e '/^[[:space:]]*$$/d' \ + -e 's/^[^=].*=[[:space:]]*\([^[:space:]]\{1,\}\).*$$/\\1/' \ + `; \ + spaces=' '; \ + for p in $${allprogs}; do \ + case $$p in \ + =*) $(ECHO); $(ECHO) "$$p";; \ + *) \ + $(ECHO) -n "$$p:$$spaces" | $(SED) -e 's/^\(.\{0,20\}\).*$$/\1/'; \ + loc=`$(WHICH) $$p`; \ + if [ x"$$?" = x"0" ]; then \ + $(ECHO) "$(C_SUCCESS)Found:$(C_RESET) $$loc"; \ + else \ + $(ECHO) "$(C_FAILURE)Not Found$(C_RESET)"; \ + fi; \ + ;; \ + esac; \ + done + +.PHONY: _check_gpi_files +_check_gpi_files: + $(QUIET)$(ECHO) "== Checking all .gpi files for common errors =="; \ + $(ECHO); \ + for f in $(files.gpi); do \ + result=`$(EGREP) '^([^#]*set terminal |set output )' $$f`; \ + $(ECHO) -n "$$f: "; \ + if [ x"$$result" = x"" ]; then \ + $(ECHO) "$(C_SUCCESS)Okay$(C_RESET)"; \ + else \ + $(ECHO) "$(C_FAILURE)Warning: Problematic commands:$(C_RESET)";\ + $(ECHO) "$(C_ERROR)$$result$(C_RESET)"; \ + fi; \ + done; \ + $(ECHO) + +.PHONY: _all_stems +_all_stems: + $(QUIET)$(ECHO) "== All Stems ==" + $(QUIET)$(call echo-list,$(sort $(all_stems))) + +.PHONY: _includes +_includes: + $(QUIET)$(ECHO) "== Include Stems ==" + $(QUIET)$(ECHO) "=== Sources ===" + $(QUIET)$(call echo-list,$(sort $(source_includes))) + $(QUIET)$(ECHO) "=== Graphics ===" + $(QUIET)$(call echo-list,$(sort $(graphic_includes))) + +.PHONY: _all_sources +_all_sources: + $(QUIET)$(ECHO) "== All Sources ==" + $(QUIET)$(call echo-list,$(sort $(all_files.tex))) + +.PHONY: _dependency_graph +_dependency_graph: + $(QUIET)$(ECHO) "/* LaTeX Dependency Graph */" + $(QUIET)$(call output-dependency-graph) + +.PHONY: _show_dependency_graph +_show_dependency_graph: + $(QUIET)$(call output-dependency-graph,$(graph_stem).dot) + $(QUIET)$(DOT) -Tps -o $(graph_stem).eps $(graph_stem).dot + $(QUIET)$(VIEW_POSTSCRIPT) $(graph_stem).eps + $(QUIET)$(call remove-temporary-files,$(graph_stem).*) + +.PHONY: _sources +_sources: + $(QUIET)$(ECHO) "== Sources ==" + $(QUIET)$(call echo-list,$(sort $(files.tex))) + +.PHONY: _scripts +_scripts: + $(QUIET)$(ECHO) "== Scripts ==" + $(QUIET)$(call echo-list,$(sort $(files_scripts))) + +.PHONY: _graphic_outputs +_graphic_outputs: + $(QUIET)$(ECHO) "== Graphic Outputs ==" + $(QUIET)$(call echo-list,$(sort $(all_graphics_targets))) + +.PHONY: _graphic_sources +_graphic_sources: + $(QUIET)$(ECHO) "== Graphic Sources ==" + $(QUIET)$(call echo-list,$(sort $(files_graphics))) + +.PHONY: _env +_env: +ifdef .VARIABLES + $(QUIET)$(ECHO) "== MAKE VARIABLES ==" + $(QUIET)$(call echo-list,$(foreach var,$(sort $(.VARIABLES)),'$(var)')) +endif + $(QUIET)$(ECHO) "== ENVIRONMENT ==" + $(QUIET)$(ENV) + +# +# CLEAN TARGETS +# +.PHONY: clean-deps +clean-deps: + $(QUIET)$(call clean-files,$(all_d_targets) *.make *.make.temp *.cookie) + +.PHONY: clean-tex +clean-tex: clean-deps + $(QUIET)$(call clean-files,$(rm_tex)) + +.PHONY: clean-graphics +# TODO: This *always* deletes pstex files, even if they were not generated by +# anything.... In other words, if you create a pstex and pstex_t pair by hand +# an drop them in here without the generating fig file, they will be deleted +# and you won't get them back. It's a hack put in here because I'm not sure we +# even want to keep pstex functionality, so my motivation is not terribly high +# for doing it right. +clean-graphics: + $(QUIET)$(call clean-files,$(all_graphics_targets) *.gpi.d *.pstex *.pstex_t *.dot_t) + +.PHONY: clean-backups +clean-backups: + $(QUIET)$(call clean-files,$(backup_patterns) *.temp) + +.PHONY: clean-auxiliary +clean-auxiliary: + $(QUIET)$(call clean-files,$(graph_stem).*) + +.PHONY: clean-nographics +clean-nographics: clean-tex clean-deps clean-backups clean-auxiliary ; + +.PHONY: clean +clean: clean-tex clean-graphics clean-deps clean-backups clean-auxiliary + +# +# HELP TARGETS +# + +.PHONY: help +help: + $(help_text) + +.PHONY: version +version: + $(QUIET)\ + $(ECHO) "$(fileinfo) Version $(version)"; \ + $(ECHO) "by $(author)"; \ + $(ECHO); \ + $(ECHO) 'SVN info: $(svninfo)'; + +# +# HELP TEXT +# + +define help_text +# $(fileinfo) Version $(version) +# +# by $(author) +# +# Generates a number of possible output files from a LaTeX document and its +# various dependencies. Handles .bib files, \include and \input, and .eps +# graphics. All dependencies are handled automatically by running LaTeX over +# the source. +# +# USAGE: +# +# make [GRAY=1] [VERBOSE=1] [SHELL_DEBUG=1] <target(s)> +# +# STANDARD OPTIONS: +# GRAY: +# Setting this variable forces all recompiled graphics to be grayscale. +# It is useful when creating a document for printing. The default is +# to allow colors. Note that it only changes graphics that need to be +# rebuilt! It is usually a good idea to do a 'make clean' first. +# +# There is another facility for creating grayscale documents that is +# better when you can use it (it has some small limitations not shared +# by this approach). See the section on %._gray_ targets below. +# +# VERBOSE: +# This turns off all @ prefixes for commands invoked by make. Thus, +# you get to see all of the gory details of what is going on. +# +# SHELL_DEBUG: +# This enables the -x option for sh, meaning that everything it does is +# echoed to stderr. This is particularly useful for debugging +# what is going on in $$(shell ...) invocations. One of my favorite +# debugging tricks is to do this: +# +# make -d SHELL_DEBUG=1 VERBOSE=1 2>&1 | less +# +# STANDARD AUXILIARY FILES: +# +# Makefile.ini +# +# This file can contain variable declarations that override various +# aspects of the makefile. For example, one might specify +# +# neverclean := *.pdf *.ps +# onlysources.tex := main.tex +# PS2PDF_EMBED := ps2pdf14 +# LATEX_COLOR_WARNING := 'bold red uline' +# +# And this would override the neverclean setting to ensure that pdf +# and ps files always remain behind, set the makefile to treat all +# .tex files that are not "main.tex" as includes (and therefore not +# default targets), and ps2pdf14 as the proper ps to pdf conversion +# program for embedded fonts. It also changes the LaTeX warning +# output to be red, bold, and underlined. +# +# There are numerous variables in this file that can be overridden in +# this way. Search for '?=' to find them all. +# +# Also, you can put arbitrary targets into it if, for example, you +# want your source built from something else, e.g.: +# +# generated.tex: generating_script.weird_lang depA depB +# ./generating_script.weird_lang > $$@ +# +# The Makefile.ini is imported before anything else is done, so go +# wild with your ideas for changes to this makefile in there. It +# makes it easy to test them before submitting patches. +# +# STANDARD ENVIRONMENT VARIABLES: +# +# LATEX_COLOR_WARNING '$(LATEX_COLOR_WARNING)' +# LATEX_COLOR_ERROR '$(LATEX_COLOR_ERROR)' +# LATEX_COLOR_UNDERFULL '$(LATEX_COLOR_UNDERFULL)' +# LATEX_COLOR_OVERFULL '$(LATEX_COLOR_OVERFULL)' +# LATEX_COLOR_PAGES '$(LATEX_COLOR_PAGES)' +# LATEX_COLOR_BUILD '$(LATEX_COLOR_BUILD)' +# LATEX_COLOR_GRAPHIC '$(LATEX_COLOR_GRAPHIC)' +# LATEX_COLOR_DEP '$(LATEX_COLOR_DEP)' +# LATEX_COLOR_SUCCESS '$(LATEX_COLOR_SUCCESS)' +# LATEX_COLOR_FAILURE '$(LATEX_COLOR_FAILURE)' +# +# These may be redefined in your environment to be any of the following: +# +# black +# red +# green +# yellow +# blue +# magenta +# cyan +# white +# +# Bold or underline may be used, as well, either alone or in combination +# with colors: +# +# bold +# uline +# +# Order is not important. You may want, for example, to specify: +# +# export LATEX_COLOR_SUCCESS='bold blue uline' +# +# in your .bashrc file. I don't know why, but you may want to. +# +# STANDARD TARGETS: +# +# all: +# Make all possible documents in this directory. The documents are +# determined by scanning for .tex and .tex.sh (described in more detail +# later) and omitting any file that ends in ._include_.tex or +# ._nobuild_.tex. The output is a set of .pdf files. +# +# If you wish to omit files without naming them with the special +# underscore names, set the following near the top of the Makefile, +# or (this is recommended) within a Makefile.ini in the same directory: +# +# includes.tex := file1.tex file2.tex +# +# This will cause the files listed to be considered as include files. +# +# If you have only few source files, you can set +# +# onlysources.tex := main.tex +# +# This will cause only the source files listed to be considered in +# dependency detection. All other .tex files will be considered as +# include files. Note that these options work for *any* source type, +# so you could do something similar with includes.gpi, for example. +# Note that this works for *any valid source* target. All of the +# onlysources.* variables are commented out in the shipping version of +# this file, so it does the right thing when they simply don't exist. +# The comments are purely documentation. If you know, for example, that +# file.mycoolformat is supported by this Makefile, but don't see the +# "onlysources.mycoolformat" declared in the comments, that doesn't mean +# you can't use it. Go ahead and set "onlysources.mycoolformat" and it +# should do the right thing. +# +# show: +# Builds and displays all documents in this directory. It uses the +# environment-overridable value of VIEW_PDF (currently $(VIEW_PDF)) to +# do its work. +# +# all-graphics: +# Make all of the graphics in this directory. +# +# all-pstex: +# Build all fig files into pstex and pstex_t files. Gray DOES NOT WORK. +# +# all-gray-pstex: +# Build all fig files into grayscale pstex and pstex_t files. +# +# all-dot2tex: +# Build all dot files into tex files. +# +# show-graphics: +# Builds and displays all graphics in this directory. Uses the +# environment-overridable value of VIEW_GRAPHICS (currently +# $(VIEW_GRAPHICS)) to do its work. +# +# clean: +# Remove ALL generated files, leaving only source intact. +# This will *always* skip files mentioned in the "neverclean" variable, +# either in this file or specified in Makefile.ini: +# +# neverclean := *.pdf *.ps +# +# The neverclean variable works on all "clean" targets below, as well. +# +# clean-graphics: +# Remove all generated graphics files. +# +# clean-backups: +# Remove all backup files: $(backup_patterns) +# (XFig and other editors have a nasty habit of leaving them around) +# Also removes Makefile-generated .temp files +# +# clean-tex: +# Remove all files generated from LaTeX invocations except dependency +# information. Leaves graphics alone. +# +# clean-deps: +# Removes all auto-generated dependency information. +# +# clean-auxiliary: +# Removes extra files created by various targets (like the dependency +# graph output). +# +# clean-nographics: +# Cleans everything *except* the graphics files. +# +# help: +# This help text. +# +# version: +# Version information about this LaTeX makefile. +# +# DEBUG TARGETS: +# +# _all_programs: +# A list of the programs used by this makefile. +# +# _check_programs: +# Checks your system for the needed software and reports what it finds. +# +# _check_gpi_files: +# Checks the .gpi files in the current directory for common errors, such +# as specification of the terminal or output file inside of the gpi file +# itself. +# +# _dependency_graph: +# Outputs a .dot file to stdout that represents a graph of LaTeX +# dependencies. To see it, use the _show_dependency_graph target or +# direct the output to a file, run dot on it, and view the output, e.g.: +# +# make _dependency_graph > graph.dot +# dot -T ps -o graph.eps graph.dot +# gv graph.eps +# +# _show_dependency_graph: +# Makes viewing the graph simple: extracts, builds and displays the +# dependency graph given in the _dependency_graph target using the value +# of the environment-overridable VIEW_POSTSCRIPT variable (currently set +# to $(VIEW_POSTSCRIPT)). The postscript viewer is used because it +# makes it easier to zoom in on the graph, a critical ability for +# something so dense and mysterious. +# +# _all_sources: +# List all .tex files in this directory. +# +# _sources: +# Print out a list of all compilable sources in this directory. This is +# useful for determining what make thinks it will be using as the +# primary source for 'make all'. +# +# _scripts: +# Print out a list of scripts that make knows can be used to generate +# .tex files (described later). +# +# _all_stems: +# Print a list of stems. These represent bare targets that can be +# executed. Listing <stem> as a bare target will produce <stem>.pdf. +# +# _includes: +# A list of .d files that would be included in this run if _includes +# weren't specified. This target may be used alone or in conjunction +# with other targets. +# +# _graphic_sources: +# A list of all files that can create .eps files +# +# _graphic_outputs: +# A list of all generated .eps files +# +# _env: +# A list of environment variables and their values. If supported by +# your version of make, also a list of variables known to make. +# +# FILE TARGETS: +# +# %, %.pdf: +# Build a PDF file from the corresponding %.tex file. This is +# done using dvips and ps2pdf. Some may object to this idea, +# saying that pdflatex is a better approach, but I disagree for +# two major reasons: +# +# * Postscript can be a very nice thing to have directly from the LaTeX +# file, especially when printing. +# +# * One word: psfrag. If you don't know this wonderful package, get to +# know it. It is a workhorse for making graphs pretty. +# +# %._show: +# A phony target that builds the pdf file and then displays it using the +# environment-overridable value of VIEW_PDF ($(VIEW_PDF)). +# +# %._graphics: +# A phony target that generates all graphics on which %.dvi +# depends. +# +# %.ps: +# Build a Postscript file from the corresponding %.tex file. +# This is done using dvips. Paper size is automatically +# extracted from the declaration +# +# \documentclass[<something>paper] +# +# or it is the system default. +# +# If using beamer (an excellent presentation class), the paper +# size is ignored. More on this later. +# +# %.dvi: +# Build the DVI file from the corresponding %.tex file. +# +# %.ind: +# Build the index for this %.tex file. +# +# %.eps: +# Build an eps file from one of the following file types: +# +# .dot : graphviz +# .gpi : gnuplot +# .fig : xfig +# .xvg : xmgrace +# .svg : scalable vector graphics (goes through inkscape) +# .png : png (goes through NetPBM) +# .eps.gz : gzipped eps +# +# The behavior of this makefile with each type is described in +# its own section below. +# +# %.pstex{,_t}: +# Build a .pstex_t file from a .fig file. +# +# All targets have a corresponding %._gray_.suffix form, which creates +# everything in monochrome. This is useful for creating both color and +# grayscale versions of the same document, and they can coexist happily in +# the same directory. Examples: +# +# make test._gray_._graphics # Build all grayscale graphics +# make test._gray_ # Build a grayscale document +# +# The use of a ._gray_ target creates ._gray_.tex files (not forgetting the +# included files!) with appropriate dependencies on ._gray_.eps graphics. +# This approach is in many ways superior to specifying GRAY=1 on the command +# line, but has some limitations. Because a new .tex file must be created, +# this means that the original .tex file must be parsed and all references +# to graphics and include files must be transformed. This can be a brittle +# operation in a macro-based language like LaTeX, since it is very easy to +# define macros that call \include or \input indirectly. +# +# Here the naming strategy for include files comes into play. They all have +# ._include_. in their name, and are therefore fairly easy to search out. +# That sequence is unlikely to appear in text, so it is fairly safe to +# replace it. Anything ending in .eps is also replaced to end with +# ._gray_.eps, and is subject to the same issues. +# +# In short, if your file contains _include_ when not referencing a file, or +# it says .eps when not referencing a graphic, this approach is probably not +# for you. I imagine that these cases are fairly rare, however, so it +# should work most of the time. When a doubt arises, you can be sure that +# GRAY=1 will do the right thing, provided you precede it with a 'make +# clean'. +# +# FEATURES: +# +# Optional Binary Directory: +# If you create the _out_ directory in the same place as the makefile, +# it will automatically be used as a dumping ground for .dvi, .ps, and +# .pdf output files. +# +# Alternatively, you can set the BINARY_TARGET_DIR variable, either as a +# make argument or in Makefile.ini, to point to your directory of +# choice. Note that no pathname wildcard expansion is done in the +# makefile, so make sure that the path is complete before going in +# there. E.g., if you want to specify something in your home directory, +# use $$HOME/ instead of ~/ so that the shell expands it before it gets +# to the makefile. +# +# External Program Dependencies: +# Every external program used by the makefile is represented by an +# ALLCAPS variable at the top of this file. This should allow you to +# make judgments about whether your system supports the use of this +# makefile. The list is available in the ALL_PROGRAMS variable and, +# provided that you are using GNU make 3.80 or later (or you haven't +# renamed this file to something weird like "mylatexmakefile" and like +# invoking it with make -f) can be viewed using +# +# make _all_programs +# +# Additionally, the availability of these programs can be checked +# automatically for you by running +# +# make _check_programs +# +# The programs are categorized according to how important they are and +# what function they perform to help you decide which ones you really +# need. +# +# Colorized Output: +# The output of commands is colorized to highlight things that are often +# important to developers. This includes {underfull,overfull} +# {h,v}boxes, general LaTeX Errors, each stage of document building, and +# the number of pages in the final document. The colors are obtained +# using 'tput', so colorization should work pretty well on any terminal. +# +# The colors can be customized very simply by setting any of the +# LATEX_COLOR_<CONTEXT> variables in your environment (see above). +# +# Predecessors to TeX Files: +# Given a target <target>, if no <target>.tex file exists but a +# corresponding script or predecessor file exists, then appropriate +# action will be taken to generate the tex file. +# +# Currently supported script or predecessor languages are: +# +# sh: %.tex.sh +# +# Calls the script using sh, assuming that its output is a .tex +# file. Of course, your .sh file can call another script to do +# its work. Go wild! +# +# The script is called thus: +# +# <interpreter> <script file name> <target tex file> +# +# and therefore sees exactly one parameter: the name of the .tex +# file that it is to create. +# +# Why does this feature exist? I ran into this while working on +# my paper dissertation. I wrote a huge bash script that used a +# lot of sed to bring together existing papers in LaTeX. It +# would have been nice had I had something like this to make my +# life easier, since as it stands I have to run the script and +# then build the document with make. This feature provides hooks +# for complicated stuff that you may want to do, but that I have +# not considered. +# +# This approach does not work for included .tex files. If you +# want to do something special with those, you should wrap all of +# that functionality into a top-level source script that creates +# the necessary includes as well. +# +# reST: %.rst +# +# Runs the reST to LaTeX converter to generate a .tex file +# If it finds a file names _rststyle_._include_.tex, uses it as +# the "stylesheet" option to rst2latex. +# +# Dependencies: +# +# In general, dependencies are extracted directly from LaTeX output on +# your document. This includes +# +# * Bibliography information +# * \include or \input files (honoring \includeonly, too) +# * Graphics files inserted by the graphicx package +# +# Where possible, all of these are built correctly and automatically. +# In the case of graphics files, these are generated from the following +# file types: +# +# GraphViz: .dot +# GNUPlot: .gpi +# XFig: .fig +# XMgrace: .xvg +# SVG: .svg +# PNG: .png +# GZipped EPS: .eps.gz +# +# If the file exists as a .eps already, it is merely used (and will not +# be deleted by 'clean'!). +# +# LaTeX and BibTeX are invoked correctly and the "Rerun to get +# cross-references right" warning is heeded a reasonable number of +# times. In my experience this is enough for even the most troublesome +# documents, but it can be easily changed (if LaTeX has to be run after +# BibTeX more than three times, it is likely that something is moving +# back and forth between pages, and no amount of LaTeXing will fix +# that). +# +# \includeonly is honored by this system, so files that are not +# specified there will not trigger a rebuild when changed. +# +# Beamer: +# A special TeX source comment is recognized by this makefile: +# +# %%[[:space:]]*BEAMER[[:space:]]*LARGE +# +# The presence of this comment forces the output of dvips through psnup +# to enlarge beamer slides to take up an entire letter-sized page. This +# is particularly useful when printing transparencies or paper versions +# of the slides. For some reason landscape orientation doesn't appear +# to work, though. +# +# If you want to put multiple slides on a page, use this option and then +# print using mpage, a2ps, or psnup to consolidate slides. My personal +# favorite is a2ps, but your mileage may vary. +# +# When beamer is the document class, dvips does NOT receive a paper size +# command line attribute, since beamer does special things with sizes. +# +# GNUPlot Graphics: +# When creating a .gpi file, DO NOT INCLUDE the "set terminal" or "set +# output" commands! The makefile will include terminal information for +# you. Besides being unnecessary and potentially harmful, including the +# terminal definition in the .gpi file makes it harder for you, the one +# writing the document, to preview your graphics, e.g., with +# +# gnuplot -persist myfile.gpi +# +# so don't do specify a terminal or an output file in your .gpi files. +# +# When building a gpi file into an eps file, there are several features +# available to the document designer: +# +# Global Header: +# The makefile searches for the files in the variable GNUPLOT_GLOBAL +# in order: +# +# ($(GNUPLOT_GLOBAL)) +# +# Only the first found is used. All .gpi files in the directory are +# treated as though the contents of GNUPLOT_GLOBAL were directly +# included at the top of the file. +# +# NOTE: This includes special comments! (see below) +# +# Font Size: +# A special comment in a .gpi file (or a globally included file) of +# the form +# +# ## FONTSIZE=<number> +# +# will change the font size of the GPI output. If font size is +# specified in both the global file and the GPI file, the +# specification in the individual GPI file is used. +# +# Grayscale Output: +# GNUplot files also support a special comment to force them to be +# output in grayscale *no matter what*: +# +# ## GRAY +# +# This is not generally advisable, since you can always create a +# grayscale document using the forms mentioned above. But, if your +# plot simply must be grayscale even in a document that allows +# colors, this is how you do it. +# +# XFig Graphics: +# No special handling is done with XFig, except when a global +# grayscale method is used, e.g. +# +# make document._gray_ +# or +# make GRAY=1 document +# +# In these cases the .eps files is created using the -N switch to +# fig2dev to turn off color output. (Only works with eps, not +# pstex output!) +# +# GraphVis Graphics: +# Color settings are simply ignored here. The 'dot' program is used +# to transform a .dot file into a .eps file. +# +# If you want, you can use the dot2tex program to convert dot files +# to tex graphics. The default is to just call dot2tex with no +# arguments, but you can change the DOT2TEX definition to include +# options as needed (in your Makefile.ini). +# +# Note that, like pstex, the makefile cannot use latex's own output +# to discover all missing dot_t (output) files, since anytime TeX +# includes TeX, it has to bail when it can't find the include file. +# It can therefore only stop on the first missing file it discovers, +# and we can't get a large list of them out easily. +# +# So, the makefile errors out if it's missing an included dot_t +# file, then prompts the user to run this command manually: +# +# make all-dot2tex +# +# GZipped EPS Graphics: +# +# A .eps.gz file is sometimes a nice thing to have. EPS files can get +# very large, especially when created from bitmaps (don't do this if you +# don't have to). This makefile will unzip them (not in place) to +# create the appropriate EPS file. +# +endef + +# +# DEPENDENCY CHART: +# +#digraph "g" { +# rankdir=TB +# size="9,9" +# edge [fontsize=12 weight=10] +# node [shape=box fontsize=14 style=rounded] +# +# eps [ +# shape=Mrecord +# label="{{<gpi> GNUplot|<epsgz> GZip|<dot> Dot|<fig> XFig}|<eps> eps}" +# ] +# pstex [label="%.pstex"] +# pstex_t [label="%.pstex_t"] +# tex_outputs [shape=point] +# extra_tex_files [shape=point] +# gpi_data [label="<data>"] +# gpi_includes [label="_include_.gpi"] +# aux [label="%.aux"] +# fls [label="%.fls"] +# idx [label="%.idx"] +# ind [label="%.ind"] +# log [label="%.log"] +# tex_sh [label="%.tex.sh"] +# rst [label="%.rst"] +# tex [ +# shape=record +# label="<tex> %.tex|<include> _include_.tex" +# ] +# include_aux [label="_include_.aux"] +# file_bib [label=".bib"] +# bbl [label="%.bbl"] +# dvi [label="%.dvi"] +# ps [label="%.ps"] +# pdf [label="%.pdf"] +# fig [label=".fig"] +# dot [label=".dot"] +# gpi [label=".gpi"] +# eps_gz [label=".eps.gz"] +# +# gpi_files [shape=point] +# +# rst -> tex:tex [label="reST"] +# tex_sh -> tex:tex [label="sh"] +# tex -> tex_outputs [label="latex"] +# tex_outputs -> dvi +# tex_outputs -> aux +# tex_outputs -> log +# tex_outputs -> fls +# tex_outputs -> idx +# tex_outputs -> include_aux +# aux -> bbl [label="bibtex"] +# file_bib -> bbl [label="bibtex"] +# idx -> ind [label="makeindex"] +# ind -> extra_tex_files +# bbl -> extra_tex_files +# eps -> extra_tex_files +# extra_tex_files -> dvi [label="latex"] +# gpi_files -> eps:gpi [label="gnuplot"] +# gpi -> gpi_files +# gpi_data -> gpi_files +# gpi_includes -> gpi_files +# eps_gz -> eps:epsgz [label="gunzip"] +# fig -> eps:fig [label="fig2dev"] +# fig -> pstex [label="fig2dev"] +# fig -> pstex_t [label="fig2dev"] +# pstex -> pstex_t [label="fig2dev"] +# dot -> eps:dot [label="dot"] +# dvi -> ps [label="dvips"] +# include_aux -> bbl [label="bibtex"] +# ps -> pdf [label="ps2pdf"] +# +# edge [ color=blue label="" style=dotted weight=1 fontcolor=blue] +# fls -> tex:include [label="INPUT: *.tex"] +# fls -> file_bib [label="INPUT: *.aux"] +# aux -> file_bib [label="\\bibdata{...}"] +# include_aux -> file_bib [label="\\bibdata{...}"] +# log -> gpi [label="Graphic file"] +# log -> fig [label="Graphic file"] +# log -> eps_gz [label="Graphic file"] +# log -> dot [label="Graphic file"] +# log -> idx [label="No such *.ind"] +# gpi -> gpi_data [label="plot '...'"] +# gpi -> gpi_includes [label="load '...'"] +# tex:tex -> ps [label="paper"] +# tex:tex -> pdf [label="embedding"] +#} + +# +# DEPENDENCY CHART SCRIPT +# +# $(call output_dependency_graph,[<output file>]) +define output-dependency-graph + if [ -f '$(this_file)' ]; then \ + $(SED) \ + -e '/^[[:space:]]*#[[:space:]]*DEPENDENCY CHART:/,/^$$/!d' \ + -e '/DEPENDENCY CHART/d' \ + -e '/^$$/d' \ + -e 's/^[[:space:]]*#//' \ + $(this_file) $(if $1,> '$1',); \ + else \ + $(ECHO) "Cannot determine the name of this makefile."; \ + fi +endef +# vim: noet sts=0 sw=8 ts=8 |