diff options
Diffstat (limited to 'Master/texmf-dist/doc/latex/revtex/sample/aip/aipsamp.tex')
| -rw-r--r-- | Master/texmf-dist/doc/latex/revtex/sample/aip/aipsamp.tex | 613 |
1 files changed, 613 insertions, 0 deletions
diff --git a/Master/texmf-dist/doc/latex/revtex/sample/aip/aipsamp.tex b/Master/texmf-dist/doc/latex/revtex/sample/aip/aipsamp.tex new file mode 100644 index 00000000000..0b48b9673b3 --- /dev/null +++ b/Master/texmf-dist/doc/latex/revtex/sample/aip/aipsamp.tex @@ -0,0 +1,613 @@ +% ****** Start of file aipsamp.tex ****** +% +% This file is part of the AIP files in the AIP distribution for REVTeX 4. +% Version 4.1 of REVTeX, October 2009 +% +% Copyright (c) 2009 American Institute of Physics. +% +% See the AIP README file for restrictions and more information. +% +% TeX'ing this file requires that you have AMS-LaTeX 2.0 installed +% as well as the rest of the prerequisites for REVTeX 4.1 +% +% It also requires running BibTeX. The commands are as follows: +% +% 1) latex aipsamp +% 2) bibtex aipsamp +% 3) latex aipsamp +% 4) latex aipsamp +% +% Use this file as a source of example code for your aip document. +% Use the file aiptemplate.tex as a template for your document. +\documentclass[% + aip, + jmp,% + amsmath,amssymb, +%preprint,% + reprint,% +%author-year,% +%author-numerical,% +]{revtex4-1} + +\usepackage{graphicx}% Include figure files +\usepackage{dcolumn}% Align table columns on decimal point +\usepackage{bm}% bold math +%\usepackage[mathlines]{lineno}% Enable numbering of text and display math +%\linenumbers\relax % Commence numbering lines + +\begin{document} + +\preprint{AIP/123-QED} + +\title[Sample title]{Sample Title:\\with Forced Linebreak\footnote{Error!}}% Force line breaks with \\ +\thanks{Footnote to title of article.} + +\author{A. Author} + \altaffiliation[Also at ]{Physics Department, XYZ University.}%Lines break automatically or can be forced with \\ +\author{B. Author}% + \email{Second.Author@institution.edu.} +\affiliation{ +Authors' institution and/or address%\\This line break forced with \textbackslash\textbackslash +}% + +\author{C. Author} + \homepage{http://www.Second.institution.edu/~Charlie.Author.} +\affiliation{% +Second institution and/or address%\\This line break forced% with \\ +}% + +\date{\today}% It is always \today, today, + % but any date may be explicitly specified + +\begin{abstract} +An article usually includes an abstract, a concise summary of the work +covered at length in the main body of the article. It is used for +secondary publications and for information retrieval purposes. +% +Valid PACS numbers may be entered using the \verb+\pacs{#1}+ command. +\end{abstract} + +\pacs{Valid PACS appear here}% PACS, the Physics and Astronomy + % Classification Scheme. +\keywords{Suggested keywords}%Use showkeys class option if keyword + %display desired +\maketitle + +\begin{quotation} +The ``lead paragraph'' is encapsulated with the \LaTeX\ +\verb+quotation+ environment and is formatted as a single paragraph before the first section heading. +(The \verb+quotation+ environment reverts to its usual meaning after the first sectioning command.) +Note that numbered references are allowed in the lead paragraph. +% +The lead paragraph will only be found in an article being prepared for the journal \textit{Chaos}. +\end{quotation} + +\section{\label{sec:level1}First-level heading:\protect\\ The line +break was forced \lowercase{via} \textbackslash\textbackslash} + +This sample document demonstrates proper use of REV\TeX~4.1 (and +\LaTeXe) in manuscripts prepared for submission to AIP +journals. Further information can be found in the documentation included in the distribution or available at +\url{http://authors.aip.org} and in the documentation for +REV\TeX~4.1 itself. + +When commands are referred to in this example file, they are always +shown with their required arguments, using normal \TeX{} format. In +this format, \verb+#1+, \verb+#2+, etc. stand for required +author-supplied arguments to commands. For example, in +\verb+\section{#1}+ the \verb+#1+ stands for the title text of the +author's section heading, and in \verb+\title{#1}+ the \verb+#1+ +stands for the title text of the paper. + +Line breaks in section headings at all levels can be introduced using +\textbackslash\textbackslash. A blank input line tells \TeX\ that the +paragraph has ended. + +\subsection{\label{sec:level2}Second-level heading: Formatting} + +This file may be formatted in both the \texttt{preprint} (the default) and +\texttt{reprint} styles; the latter format may be used to +mimic final journal output. Either format may be used for submission +purposes; however, for peer review and production, AIP will format the +article using the \texttt{preprint} class option. Hence, it is +essential that authors check that their manuscripts format acceptably +under \texttt{preprint}. Manuscripts submitted to AIP that do not +format correctly under the \texttt{preprint} option may be delayed in +both the editorial and production processes. + +The \texttt{widetext} environment will make the text the width of the +full page, as on page~\pageref{eq:wideeq}. (Note the use the +\verb+\pageref{#1}+ to get the page number right automatically.) The +width-changing commands only take effect in \texttt{twocolumn} +formatting. It has no effect if \texttt{preprint} formatting is chosen +instead. + +\subsubsection{\label{sec:level3}Third-level heading: Citations and Footnotes} + +Citations in text refer to entries in the Bibliography; +they use the commands \verb+\cite{#1}+ or \verb+\onlinecite{#1}+. +Because REV\TeX\ uses the \verb+natbib+ package of Patrick Daly, +its entire repertoire of commands are available in your document; +see the \verb+natbib+ documentation for further details. +The argument of \verb+\cite+ is a comma-separated list of \emph{keys}; +a key may consist of letters and numerals. + +By default, citations are numerical; \cite{feyn54} author-year citations are an option. +To give a textual citation, use \verb+\onlinecite{#1}+: (Refs.~\onlinecite{witten2001,epr,Bire82}). +REV\TeX\ ``collapses'' lists of consecutive numerical citations when appropriate. +REV\TeX\ provides the ability to properly punctuate textual citations in author-year style; +this facility works correctly with numerical citations only with \texttt{natbib}'s compress option turned off. +To illustrate, we cite several together \cite{feyn54,witten2001,epr,Berman1983}, +and once again (Refs.~\onlinecite{epr,feyn54,Bire82,Berman1983}). +Note that, when numerical citations are used, the references were sorted into the same order they appear in the bibliography. + +A reference within the bibliography is specified with a \verb+\bibitem{#1}+ command, +where the argument is the citation key mentioned above. +\verb+\bibitem{#1}+ commands may be crafted by hand or, preferably, +generated by using Bib\TeX. +The AIP styles for REV\TeX~4 include Bib\TeX\ style files +\verb+aipnum.bst+ and \verb+aipauth.bst+, appropriate for +numbered and author-year bibliographies, +respectively. +REV\TeX~4 will automatically choose the style appropriate for +the document's selected class options: the default is numerical, and +you obtain the author-year style by specifying a class option of \verb+author-year+. + +This sample file demonstrates a simple use of Bib\TeX\ +via a \verb+\bibliography+ command referencing the \verb+aipsamp.bib+ file. +Running Bib\TeX\ (in this case \texttt{bibtex +aipsamp}) after the first pass of \LaTeX\ produces the file +\verb+aipsamp.bbl+ which contains the automatically formatted +\verb+\bibitem+ commands (including extra markup information via +\verb+\bibinfo+ commands). If not using Bib\TeX, the +\verb+thebibiliography+ environment should be used instead. + +\paragraph{Fourth-level heading is run in.}% +Footnotes are produced using the \verb+\footnote{#1}+ command. +Numerical style citations put footnotes into the +bibliography\footnote{Automatically placing footnotes into the bibliography requires using BibTeX to compile the bibliography.}. +Author-year and numerical author-year citation styles (each for its own reason) cannot use this method. +Note: due to the method used to place footnotes in the bibliography, \emph{you +must re-run BibTeX every time you change any of your document's +footnotes}. + +\section{Math and Equations} +Inline math may be typeset using the \verb+$+ delimiters. Bold math +symbols may be achieved using the \verb+bm+ package and the +\verb+\bm{#1}+ command it supplies. For instance, a bold $\alpha$ can +be typeset as \verb+$\bm{\alpha}$+ giving $\bm{\alpha}$. Fraktur and +Blackboard (or open face or double struck) characters should be +typeset using the \verb+\mathfrak{#1}+ and \verb+\mathbb{#1}+ commands +respectively. Both are supplied by the \texttt{amssymb} package. For +example, \verb+$\mathbb{R}$+ gives $\mathbb{R}$ and +\verb+$\mathfrak{G}$+ gives $\mathfrak{G}$ + +In \LaTeX\ there are many different ways to display equations, and a +few preferred ways are noted below. Displayed math will center by +default. Use the class option \verb+fleqn+ to flush equations left. + +Below we have numbered single-line equations, the most common kind: +\begin{eqnarray} +\chi_+(p)\alt{\bf [}2|{\bf p}|(|{\bf p}|+p_z){\bf ]}^{-1/2} +\left( +\begin{array}{c} +|{\bf p}|+p_z\\ +px+ip_y +\end{array}\right)\;, +\\ +\left\{% + \openone234567890abc123\alpha\beta\gamma\delta1234556\alpha\beta + \frac{1\sum^{a}_{b}}{A^2}% +\right\}% +\label{eq:one}. +\end{eqnarray} +Note the open one in Eq.~(\ref{eq:one}). + +Not all numbered equations will fit within a narrow column this +way. The equation number will move down automatically if it cannot fit +on the same line with a one-line equation: +\begin{equation} +\left\{ + ab12345678abc123456abcdef\alpha\beta\gamma\delta1234556\alpha\beta + \frac{1\sum^{a}_{b}}{A^2}% +\right\}. +\end{equation} + +When the \verb+\label{#1}+ command is used [cf. input for +Eq.~(\ref{eq:one})], the equation can be referred to in text without +knowing the equation number that \TeX\ will assign to it. Just +use \verb+\ref{#1}+, where \verb+#1+ is the same name that used in +the \verb+\label{#1}+ command. + +Unnumbered single-line equations can be typeset +using the \verb+\[+, \verb+\]+ format: +\[g^+g^+ \rightarrow g^+g^+g^+g^+ \dots ~,~~q^+q^+\rightarrow +q^+g^+g^+ \dots ~. \] + +\subsection{Multiline equations} + +Multiline equations are obtained by using the \verb+eqnarray+ +environment. Use the \verb+\nonumber+ command at the end of each line +to avoid assigning a number: +\begin{eqnarray} +{\cal M}=&&ig_Z^2(4E_1E_2)^{1/2}(l_i^2)^{-1} +\delta_{\sigma_1,-\sigma_2} +(g_{\sigma_2}^e)^2\chi_{-\sigma_2}(p_2)\nonumber\\ +&&\times +[\epsilon_jl_i\epsilon_i]_{\sigma_1}\chi_{\sigma_1}(p_1), +\end{eqnarray} +\begin{eqnarray} +\sum \vert M^{\text{viol}}_g \vert ^2&=&g^{2n-4}_S(Q^2)~N^{n-2} + (N^2-1)\nonumber \\ + & &\times \left( \sum_{i<j}\right) + \sum_{\text{perm}} + \frac{1}{S_{12}} + \frac{1}{S_{12}} + \sum_\tau c^f_\tau~. +\end{eqnarray} +\textbf{Note:} Do not use \verb+\label{#1}+ on a line of a multiline +equation if \verb+\nonumber+ is also used on that line. Incorrect +cross-referencing will result. Notice the use \verb+\text{#1}+ for +using a Roman font within a math environment. + +To set a multiline equation without \emph{any} equation +numbers, use the \verb+\begin{eqnarray*}+, +\verb+\end{eqnarray*}+ format: +\begin{eqnarray*} +\sum \vert M^{\text{viol}}_g \vert ^2&=&g^{2n-4}_S(Q^2)~N^{n-2} + (N^2-1)\\ + & &\times \left( \sum_{i<j}\right) + \left( + \sum_{\text{perm}}\frac{1}{S_{12}S_{23}S_{n1}} + \right) + \frac{1}{S_{12}}~. +\end{eqnarray*} +To obtain numbers not normally produced by the automatic numbering, +use the \verb+\tag{#1}+ command, where \verb+#1+ is the desired +equation number. For example, to get an equation number of +(\ref{eq:mynum}), +\begin{equation} +g^+g^+ \rightarrow g^+g^+g^+g^+ \dots ~,~~q^+q^+\rightarrow +q^+g^+g^+ \dots ~. \tag{2.6$'$}\label{eq:mynum} +\end{equation} + +A few notes on \verb=\tag{#1}=. \verb+\tag{#1}+ requires +\texttt{amsmath}. The \verb+\tag{#1}+ must come before the +\verb+\label{#1}+, if any. The numbering set with \verb+\tag{#1}+ is +\textit{transparent} to the automatic numbering in REV\TeX{}; +therefore, the number must be known ahead of time, and it must be +manually adjusted if other equations are added. \verb+\tag{#1}+ works +with both single-line and multiline equations. \verb+\tag{#1}+ should +only be used in exceptional case - do not use it to number all +equations in a paper. + +Enclosing single-line and multiline equations in +\verb+\begin{subequations}+ and \verb+\end{subequations}+ will produce +a set of equations that are ``numbered'' with letters, as shown in +Eqs.~(\ref{subeq:1}) and (\ref{subeq:2}) below: +\begin{subequations} +\label{eq:whole} +\begin{equation} +\left\{ + abc123456abcdef\alpha\beta\gamma\delta1234556\alpha\beta + \frac{1\sum^{a}_{b}}{A^2} +\right\},\label{subeq:1} +\end{equation} +\begin{eqnarray} +{\cal M}=&&ig_Z^2(4E_1E_2)^{1/2}(l_i^2)^{-1} +(g_{\sigma_2}^e)^2\chi_{-\sigma_2}(p_2)\nonumber\\ +&&\times +[\epsilon_i]_{\sigma_1}\chi_{\sigma_1}(p_1).\label{subeq:2} +\end{eqnarray} +\end{subequations} +Putting a \verb+\label{#1}+ command right after the +\verb+\begin{subequations}+, allows one to +reference all the equations in a subequations environment. For +example, the equations in the preceding subequations environment were +Eqs.~(\ref{eq:whole}). + +\subsubsection{Wide equations} +The equation that follows is set in a wide format, i.e., it spans +across the full page. The wide format is reserved for long equations +that cannot be easily broken into four lines or less: +\begin{widetext} +\begin{equation} +{\cal R}^{(\text{d})}= + g_{\sigma_2}^e + \left( + \frac{[\Gamma^Z(3,21)]_{\sigma_1}}{Q_{12}^2-M_W^2} + +\frac{[\Gamma^Z(13,2)]_{\sigma_1}}{Q_{13}^2-M_W^2} + \right) + + x_WQ_e + \left( + \frac{[\Gamma^\gamma(3,21)]_{\sigma_1}}{Q_{12}^2-M_W^2} + +\frac{[\Gamma^\gamma(13,2)]_{\sigma_1}}{Q_{13}^2-M_W^2} + \right)\;. \label{eq:wideeq} +\end{equation} +\end{widetext} +This is typed to show the output is in wide format. +(Since there is no input line between \verb+\equation+ and +this paragraph, there is no paragraph indent for this paragraph.) +\section{Cross-referencing} +REV\TeX{} will automatically number sections, equations, figure +captions, and tables. In order to reference them in text, use the +\verb+\label{#1}+ and \verb+\ref{#1}+ commands. To reference a +particular page, use the \verb+\pageref{#1}+ command. + +The \verb+\label{#1}+ should appear in a section heading, within an +equation, or in a table or figure caption. The \verb+\ref{#1}+ command +is used in the text where the citation is to be displayed. Some +examples: Section~\ref{sec:level1} on page~\pageref{sec:level1}, +Table~\ref{tab:table1},% +\begin{table} +\caption{\label{tab:table1}This is a narrow table which fits into a +text column when using \texttt{twocolumn} formatting. Note that +REV\TeX~4 adjusts the intercolumn spacing so that the table fills the +entire width of the column. Table captions are numbered +automatically. This table illustrates left-aligned, centered, and +right-aligned columns. } +\begin{ruledtabular} +\begin{tabular}{lcr} +Left\footnote{Note a.}&Centered\footnote{Note b.}&Right\\ +\hline +1 & 2 & 3\\ +10 & 20 & 30\\ +100 & 200 & 300\\ +\end{tabular} +\end{ruledtabular} +\end{table} +and Fig.~\ref{fig:epsart}. + +\section{Figures and Tables} +Figures and tables are typically ``floats''; \LaTeX\ determines their +final position via placement rules. +\LaTeX\ isn't always successful in automatically placing floats where you wish them. + +Figures are marked up with the \texttt{figure} environment, the content of which +imports the image (\verb+\includegraphics+) followed by the figure caption (\verb+\caption+). +The argument of the latter command should itself contain a \verb+\label+ command if you +wish to refer to your figure with \verb+\ref+. + +Import your image using either the \texttt{graphics} or +\texttt{graphix} packages. These packages both define the +\verb+\includegraphics{#1}+ command, but they differ in the optional +arguments for specifying the orientation, scaling, and translation of the figure. +Fig.~\ref{fig:epsart}% +\begin{figure} +\includegraphics{fig_1}% Here is how to import EPS art +\caption{\label{fig:epsart} A figure caption. The figure captions are +automatically numbered.} +\end{figure} +is small enough to fit in a single column, while +Fig.~\ref{fig:wide}% +\begin{figure*} +\includegraphics{fig_2}% Here is how to import EPS art +\caption{\label{fig:wide}Use the \texttt{figure*} environment to get a wide +figure, spanning the page in \texttt{twocolumn} formatting.} +\end{figure*} +is too wide for a single column, +so instead the \texttt{figure*} environment has been used. + +The analog of the \texttt{figure} environment is \texttt{table}, which uses +the same \verb+\caption+ command. +However, you should type your caption command first within the \texttt{table}, +instead of last as you did for \texttt{figure}. + +The heart of any table is the \texttt{tabular} environment, +which represents the table content as a (vertical) sequence of table rows, +each containing a (horizontal) sequence of table cells. +Cells are separated by the \verb+&+ character; +the row terminates with \verb+\\+. +The required argument for the \texttt{tabular} environment +specifies how data are displayed in each of the columns. +For instance, a column +may be centered (\verb+c+), left-justified (\verb+l+), right-justified (\verb+r+), +or aligned on a decimal point (\verb+d+). +(Table~\ref{tab:table4}% +\begin{table} +\caption{\label{tab:table4}Numbers in columns Three--Five have been +aligned by using the ``d'' column specifier (requires the +\texttt{dcolumn} package). +Non-numeric entries (those entries without +a ``.'') in a ``d'' column are aligned on the decimal point. +Use the +``D'' specifier for more complex layouts. } +\begin{ruledtabular} +\begin{tabular}{ccddd} +One&Two&\mbox{Three}&\mbox{Four}&\mbox{Five}\\ +\hline +one&two&\mbox{three}&\mbox{four}&\mbox{five}\\ +He&2& 2.77234 & 45672. & 0.69 \\ +C\footnote{Some tables require footnotes.} + &C\footnote{Some tables need more than one footnote.} + & 12537.64 & 37.66345 & 86.37 \\ +\end{tabular} +\end{ruledtabular} +\end{table} +illustrates the use of decimal column alignment.) + +Extra column-spacing may be be specified as well, although +REV\TeX~4 sets this spacing so that the columns fill the width of the +table. +Horizontal rules are typeset using the \verb+\hline+ +command. +The doubled (or Scotch) rules that appear at the top and +bottom of a table can be achieved by enclosing the \texttt{tabular} +environment within a \texttt{ruledtabular} environment. +Rows whose columns span multiple columns can be typeset using \LaTeX's +\verb+\multicolumn{#1}{#2}{#3}+ command +(for example, see the first row of Table~\ref{tab:table3}).% +\begin{table*} +\caption{\label{tab:table3}This is a wide table that spans the page +width in \texttt{twocolumn} mode. It is formatted using the +\texttt{table*} environment. It also demonstrates the use of +\textbackslash\texttt{multicolumn} in rows with entries that span +more than one column.} +\begin{ruledtabular} +\begin{tabular}{ccccc} + &\multicolumn{2}{c}{$D_{4h}^1$}&\multicolumn{2}{c}{$D_{4h}^5$}\\ + Ion&1st alternative&2nd alternative&lst alternative +&2nd alternative\\ \hline + K&$(2e)+(2f)$&$(4i)$ &$(2c)+(2d)$&$(4f)$ \\ + Mn&$(2g)$\footnote{The $z$ parameter of these positions is $z\sim\frac{1}{4}$.} + &$(a)+(b)+(c)+(d)$&$(4e)$&$(2a)+(2b)$\\ + Cl&$(a)+(b)+(c)+(d)$&$(2g)$\footnote{This is a footnote in a table that spans the full page +width in \texttt{twocolumn} mode. It is supposed to set on the full width of the page, just as the caption does. } + &$(4e)^{\text{a}}$\\ + He&$(8r)^{\text{a}}$&$(4j)^{\text{a}}$&$(4g)^{\text{a}}$\\ + Ag& &$(4k)^{\text{a}}$& &$(4h)^{\text{a}}$\\ +\end{tabular} +\end{ruledtabular} +\end{table*} + +The tables in this document illustrate various effects. +Tables that fit in a narrow column are contained in a \texttt{table} +environment. +Table~\ref{tab:table3} is a wide table, therefore set with the +\texttt{table*} environment. +Lengthy tables may need to break across pages. +A simple way to allow this is to specify +the \verb+[H]+ float placement on the \texttt{table} or +\texttt{table*} environment. +Alternatively, using the standard \LaTeXe\ package \texttt{longtable} +gives more control over how tables break and allows headers and footers +to be specified for each page of the table. +An example of the use of \texttt{longtable} can be found +in the file \texttt{summary.tex} that is included with the REV\TeX~4 +distribution. + +There are two methods for setting footnotes within a table (these +footnotes will be displayed directly below the table rather than at +the bottom of the page or in the bibliography). +The easiest +and preferred method is just to use the \verb+\footnote{#1}+ +command. This will automatically enumerate the footnotes with +lowercase roman letters. +However, it is sometimes necessary to have +multiple entries in the table share the same footnote. +In this case, +create the footnotes using +\verb+\footnotemark[#1]+ and \verb+\footnotetext[#1]{#2}+. +\texttt{\#1} is a numeric value. +Each time the same value for \texttt{\#1} is used, +the same mark is produced in the table. +The \verb+\footnotetext[#1]{#2}+ commands are placed after the \texttt{tabular} +environment. +Examine the \LaTeX\ source and output for Tables~\ref{tab:table1} and +\ref{tab:table2}% +\begin{table} +\caption{\label{tab:table2}A table with more columns still fits +properly in a column. Note that several entries share the same +footnote. Inspect the \LaTeX\ input for this table to see +exactly how it is done.} +\begin{ruledtabular} +\begin{tabular}{cccccccc} + &$r_c$ (\AA)&$r_0$ (\AA)&$\kappa r_0$& + &$r_c$ (\AA) &$r_0$ (\AA)&$\kappa r_0$\\ +\hline +Cu& 0.800 & 14.10 & 2.550 &Sn\footnotemark[1] +& 0.680 & 1.870 & 3.700 \\ +Ag& 0.990 & 15.90 & 2.710 &Pb\footnotemark[2] +& 0.450 & 1.930 & 3.760 \\ +Au& 1.150 & 15.90 & 2.710 &Ca\footnotemark[3] +& 0.750 & 2.170 & 3.560 \\ +Mg& 0.490 & 17.60 & 3.200 &Sr\footnotemark[4] +& 0.900 & 2.370 & 3.720 \\ +Zn& 0.300 & 15.20 & 2.970 &Li\footnotemark[2] +& 0.380 & 1.730 & 2.830 \\ +Cd& 0.530 & 17.10 & 3.160 &Na\footnotemark[5] +& 0.760 & 2.110 & 3.120 \\ +Hg& 0.550 & 17.80 & 3.220 &K\footnotemark[5] +& 1.120 & 2.620 & 3.480 \\ +Al& 0.230 & 15.80 & 3.240 &Rb\footnotemark[3] +& 1.330 & 2.800 & 3.590 \\ +Ga& 0.310 & 16.70 & 3.330 &Cs\footnotemark[4] +& 1.420 & 3.030 & 3.740 \\ +In& 0.460 & 18.40 & 3.500 &Ba\footnotemark[5] +& 0.960 & 2.460 & 3.780 \\ +Tl& 0.480 & 18.90 & 3.550 & & & & \\ +\end{tabular} +\end{ruledtabular} +\footnotetext[1]{Here's the first, from Ref.~\onlinecite{feyn54}.} +\footnotetext[2]{Here's the second.} +\footnotetext[3]{Here's the third.} +\footnotetext[4]{Here's the fourth.} +\footnotetext[5]{And etc.} +\end{table} +for an illustration. + +All AIP journals require that the initial citation of +figures or tables be in numerical order. +\LaTeX's automatic numbering of floats is your friend here: +just put each \texttt{figure} environment immediately following +its first reference (\verb+\ref+), as we have done in this example file. + +\begin{acknowledgments} +We wish to acknowledge the support of the author community in using +REV\TeX{}, offering suggestions and encouragement, testing new versions, +\dots. +\end{acknowledgments} + +\appendix + +\section{Appendixes} + +To start the appendixes, use the \verb+\appendix+ command. +This signals that all following section commands refer to appendixes +instead of regular sections. Therefore, the \verb+\appendix+ command +should be used only once---to set up the section commands to act as +appendixes. Thereafter normal section commands are used. The heading +for a section can be left empty. For example, +\begin{verbatim} +\appendix +\section{} +\end{verbatim} +will produce an appendix heading that says ``APPENDIX A'' and +\begin{verbatim} +\appendix +\section{Background} +\end{verbatim} +will produce an appendix heading that says ``APPENDIX A: BACKGROUND'' +(note that the colon is set automatically). + +If there is only one appendix, then the letter ``A'' should not +appear. This is suppressed by using the star version of the appendix +command (\verb+\appendix*+ in the place of \verb+\appendix+). + +\section{A little more on appendixes} + +Observe that this appendix was started by using +\begin{verbatim} +\section{A little more on appendixes} +\end{verbatim} + +Note the equation number in an appendix: +\begin{equation} +E=mc^2. +\end{equation} + +\subsection{\label{app:subsec}A subsection in an appendix} + +You can use a subsection or subsubsection in an appendix. Note the +numbering: we are now in Appendix~\ref{app:subsec}. + +\subsubsection{\label{app:subsubsec}A subsubsection in an appendix} +Note the equation numbers in this appendix, produced with the +subequations environment: +\begin{subequations} +\begin{eqnarray} +E&=&mc, \label{appa} +\\ +E&=&mc^2, \label{appb} +\\ +E&\agt& mc^3. \label{appc} +\end{eqnarray} +\end{subequations} +They turn out to be Eqs.~(\ref{appa}), (\ref{appb}), and (\ref{appc}). + +\nocite{*} +\bibliography{aipsamp}% Produces the bibliography via BibTeX. + +\end{document} +% +% ****** End of file aipsamp.tex ****** |