11 files changed, 257 insertions, 0 deletions
diff --git a/Master/texmf-dist/doc/latex/mugsthesis/README b/Master/texmf-dist/doc/latex/mugsthesis/README
new file mode 100644
index 00000000000..a22eea178bf
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/mugsthesis/README
@@ -0,0 +1,31 @@
+Marquette University Graduate School (MUGS) Thesis Class, mugsthesis v1.0 2014/08/07
+
+Copyright (C) 2014 Paul D. Gessler <pdgessler@gmail.com>
+
+This is a document class to be used for typesetting MUGS theses.
+The mugsthesis class is based on the memoir document class and
+meets the MUGS Thesis Directives requirements.
+
+The sample folder contains a sample thesis for testing/review.
+
+This work may be distributed and/or modified under the 
+conditions of the LaTeX Project Public License, either 
+version 1.3 of this license or (at your option) any later
+version. The latest version of this license is in
+  http://www.latex-project.org/lppl.txt 
+and version 1.3 or later is part of all distributions of 
+LaTeX version 2005/12/01 or later.
+
+This package has the LPPL maintenance status `maintained'.
+
+The Current Maintainer of this package is Paul D. Gessler.
+
+This work consists of the source files mugsthesis.dtx and mugsthesis.ins,
+the derived (generated) file mugsthesis.cls, the documentation file 
+mugsthesis.pdf, and test/sample files abstract.tex, acknowledgments.tex,
+appendix1.tex, ch01.tex, ch02.tex, dedication.tex, mugsthesis_sample.pdf,
+mugsthesis_sample.tex, and refs.bib.
+
+Use at your own risk! Class author is not responsible for denied
+thesis submissionts. Report issues and enhancement requests on
+GitHub at https://github.com/pdgessler/mugsthesis
diff --git a/Master/texmf-dist/doc/latex/mugsthesis/mugsthesis.pdf b/Master/texmf-dist/doc/latex/mugsthesis/mugsthesis.pdf
new file mode 100644
index 00000000000..f46a633d6a4
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/mugsthesis/mugsthesis.pdf
diff --git a/Master/texmf-dist/doc/latex/mugsthesis/sample/abstract.tex b/Master/texmf-dist/doc/latex/mugsthesis/sample/abstract.tex
new file mode 100644
index 00000000000..e891120fae7
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/mugsthesis/sample/abstract.tex
@@ -0,0 +1,39 @@
+\begin{abstract}
+  This is a sample of formatting for a thesis abstract.
+  This is a sample of formatting for a thesis abstract.
+  This is a sample of formatting for a thesis abstract.
+  This is a sample of formatting for a thesis abstract.
+  This is a sample of formatting for a thesis abstract.
+  This is a sample of formatting for a thesis abstract.
+  This is a sample of formatting for a thesis abstract.
+  This is a sample of formatting for a thesis abstract.
+  This is a sample of formatting for a thesis abstract.
+  This is a sample of formatting for a thesis abstract.
+
+  This is a sample of formatting for a thesis abstract.
+  This is a sample of formatting for a thesis abstract.
+  This is a sample of formatting for a thesis abstract.
+  This is a sample of formatting for a thesis abstract.
+  This is a sample of formatting for a thesis abstract.
+  This is a sample of formatting for a thesis abstract.
+  This is a sample of formatting for a thesis abstract.
+  This is a sample of formatting for a thesis abstract.
+  This is a sample of formatting for a thesis abstract.
+  This is a sample of formatting for a thesis abstract.
+  This is a sample of formatting for a thesis abstract.
+  This is a sample of formatting for a thesis abstract.
+  This is a sample of formatting for a thesis abstract.
+  This is a sample of formatting for a thesis abstract.
+  This is a sample of formatting for a thesis abstract.
+  This is a sample of formatting for a thesis abstract.
+
+  This is a sample of formatting for a thesis abstract.
+  This is a sample of formatting for a thesis abstract.
+  This is a sample of formatting for a thesis abstract.
+  This is a sample of formatting for a thesis abstract.
+  This is a sample of formatting for a thesis abstract.
+  This is a sample of formatting for a thesis abstract.
+  This is a sample of formatting for a thesis abstract.
+  This is a sample of formatting for a thesis abstract.
+  Ten more words to go and I won't exceed 350.
+\end{abstract}
diff --git a/Master/texmf-dist/doc/latex/mugsthesis/sample/acknowledgments.tex b/Master/texmf-dist/doc/latex/mugsthesis/sample/acknowledgments.tex
new file mode 100644
index 00000000000..e5fd3e0f75e
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/mugsthesis/sample/acknowledgments.tex
@@ -0,0 +1,6 @@
+\begin{acknowledgments}
+  In no particular order, I would like to thank my mother, my father, my sister, and my
+  brother.  I would like to thank my husband, my wife, my children, and God. I would like
+  to thank my teachers, my faculty, my committee, and my director.  I would like to thank
+  the Graduate School and all of the Marquette University administration.
+\end{acknowledgments}
diff --git a/Master/texmf-dist/doc/latex/mugsthesis/sample/appendix1.tex b/Master/texmf-dist/doc/latex/mugsthesis/sample/appendix1.tex
new file mode 100644
index 00000000000..6ebe209968e
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/mugsthesis/sample/appendix1.tex
@@ -0,0 +1,37 @@
+\chapter{Test Appendix with a very long title in order to test spacing behavior} \label{app:test}
+\lipsum[2]
+
+A convenient form for representing substantial numerical or textual data is a table. 
+Table~\ref{tab:test} shows an example of this functionality in \LaTeX.
+\begin{table}
+  \centering
+  \caption{Test table. With an extra-long caption to test spacing functionality for table captions. And inline mathematics.}
+  \begin{tabular}{lrr}
+    \toprule
+    Heading 1 ($u_x$)  & Head 2 & Head 3 \\
+    \midrule
+    Analytical         & 1.000  & 1.000  \\
+    Forward Difference & 0.973  & 0.976  \\
+    \bottomrule
+  \end{tabular}
+  \label{tab:test}
+\end{table}
+Diagrams, plots, and other graphics should be placed in figures. 
+Figure~\ref{fig:test} shows an example of such an environment.
+The command \verb+\includegraphics+ from the \verb+graphicx+ package may be used to include external graphics in a wide variety of formats.
+\begin{figure}
+  \centering 
+  \includegraphics[width=1in]{example-image-b}
+  \caption{This test figure tests captions and Table of Contents 
+    behavior for lengthy captions.}
+  \label{fig:test}
+\end{figure}
+
+\section{This is a Very Long Heading to Test the Table of Contents Behavior for Very Long Section Headings}
+Sample text. Sample text.
+
+\subsection{This is an Extremely Long Subsection Heading to Test Spacing Behavior for Subsections}
+\lipsum[3]
+
+\subsubsection{This is an Extremely Long Subsubsection Heading to Test Spacing Behavior for Subsubsections}
+\lipsum[4-5]
diff --git a/Master/texmf-dist/doc/latex/mugsthesis/sample/ch01.tex b/Master/texmf-dist/doc/latex/mugsthesis/sample/ch01.tex
new file mode 100644
index 00000000000..26eab241486
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/mugsthesis/sample/ch01.tex
@@ -0,0 +1,34 @@
+\chapter{Introduction} \label{cha:intro}
+Here is some introductory text regarding the thesis.
+Ideally, the introduction should be longer than one page. 
+This way, the reader will have some vague idea of what it is that you'll be presenting.
+
+I have added liberal blind text here to extend this chapter onto a second page.  
+We can then check the pagination and other important things. 
+This chapter should be introducing the topic of your thesis and providing motivation to your work.
+
+Figure~\ref{fig:test2} shows a sample figure. More details are discussed in Appendix~\ref{app:test}.
+\begin{figure}
+  \centering 
+  \includegraphics[width=1in]{example-image-a}
+  \caption{This test figure tests captions and Table of Contents 
+    behavior for very lengthy captions.}
+  \label{fig:test2}
+\end{figure}
+
+\section{Background}
+Test sectioning commands.  We can also have \verb+subsection+, \verb+subsubsection+,
+\verb+paragraph+, and \verb+subparagraph+.  Let's try a few:
+
+\subsection{Test Subsection}
+\lipsum[1]
+
+\subsection{Another Subsection}
+Testing display mathematics:
+\begin{equation}
+e = mc^2,
+\end{equation}
+where $e$ is the energy, $m$ is the mass, and the constant $c$ represents the speed of light in a vacuum.
+
+\subsubsection{Subheading}
+\lipsum[3-5]
diff --git a/Master/texmf-dist/doc/latex/mugsthesis/sample/ch02.tex b/Master/texmf-dist/doc/latex/mugsthesis/sample/ch02.tex
new file mode 100644
index 00000000000..42bdf0ac1bb
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/mugsthesis/sample/ch02.tex
@@ -0,0 +1,22 @@
+\chapter{Literature Review} \label{cha:litreview}
+As you can see here, the author has performed an exhaustive literature review to provide
+a solid foundation on which the remainder of this thesis is built.
+\begin{quote}
+This is a test of the \verb+quote+ environment. We should be in single-spaced mode and with some additional indentation to set this off from the rest of the text.
+\end{quote}
+Now we should have returned to double-spaced mode and regular indentation/margins.
+Let's add some more text here to fill the page and check the glue settings.
+We need more text on this page for testing purposes.
+
+Now let's test the \verb+quotation+ environment:
+\begin{quotation}
+This is a test of the \verb+quotation+ environment. We should be in single-spaced mode and with some additional indentation to set this off from the rest of the text.
+\end{quotation}
+Here we return%
+\footnote{
+  This is a test footnote extending over more than one line. 
+  This should be in single-spaced mode according to the MUGS Thesis Directives.
+} 
+to normal text mode.
+
+\lipsum
+\ No newline at end of file
diff --git a/Master/texmf-dist/doc/latex/mugsthesis/sample/dedication.tex b/Master/texmf-dist/doc/latex/mugsthesis/sample/dedication.tex
new file mode 100644
index 00000000000..ed1a138fb75
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/mugsthesis/sample/dedication.tex
@@ -0,0 +1,5 @@
+\begin{dedication}
+  I would like to dedicate this work to my ever-supporting family and friends.
+  \\[2em]
+  \centerline{Thank You}
+\end{dedication}
diff --git a/Master/texmf-dist/doc/latex/mugsthesis/sample/mugsthesis_sample.pdf b/Master/texmf-dist/doc/latex/mugsthesis/sample/mugsthesis_sample.pdf
new file mode 100644
index 00000000000..22920411c20
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/mugsthesis/sample/mugsthesis_sample.pdf
diff --git a/Master/texmf-dist/doc/latex/mugsthesis/sample/mugsthesis_sample.tex b/Master/texmf-dist/doc/latex/mugsthesis/sample/mugsthesis_sample.tex
new file mode 100644
index 00000000000..29d224f657d
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/mugsthesis/sample/mugsthesis_sample.tex
@@ -0,0 +1,61 @@
+\documentclass[10pt,10pt,10pt]{mugsthesis} % type size may be between 10-12 pt; default 12pt 
+
+% load any additional packages you require
+\usepackage{mathpazo}     % fonts; many alternatives here
+\usepackage{lipsum}      % for blind sample text (testing only)
+\usepackage{graphicx}    % for including graphics
+
+% input macros (for example, write your own personal macros in a 
+%   file called 'mymacros.tex' and uncomment the next line)
+%\include{mymacros}
+
+% place your title here, using `\\' to break the lines 
+% of the title into the requested inverted pyramid layout
+% the title must not exceed 120 characters
+\title{ % thesis title in inverted pyramid layout
+  A STUDY OF THE SOCIOLOGICAL IMPACT OF THE\\
+  1984 OLYMPICS ON THE POVERTY\\
+  LEVEL OF CITIZENS OF\\
+  LOS ANGELES
+} % note: \\ are line breaks in the title
+
+\author{John J. Smith, B.A.} % your name and credentials
+\degree{Master of Science}   % the degree
+\degreemo{December}          % the degree month (always May, August, or December)
+\degreeyr{2013}              % the degree year
+
+% set the smallest sectional units that are numbered and appear in the contents
+%\maxsecnumdepth{subsubsection} % default: subsection
+%\settocdepth{subsubsection}    % default: subsection
+
+% end the preamble and begin the document
+\begin{document}
+
+\maketitle                % create a title page from the preamble info
+
+\frontmatter
+\include{abstract}        % include the abstract.tex file; not to exceed 350 words
+\include{acknowledgments} % include an acknowledgments.tex file, OPTIONAL
+\include{dedication}      % include a dedication.tex file, OPTIONAL
+
+\tableofcontents          % generate and include a table of contents
+\listoftables             % use this if you have tables
+\listoffigures            % use this if you have figures (AFTER LoT if you have both)
+
+\mainmatter
+% include .tex files containing the text of each individual chapter
+\include{ch01}
+\include{ch02}
+\nocite{*} % dump all references for testing purposes
+
+% uncomment next line to change bibliography name to references (depends on style guide used)
+%\renewcommand{\bibname}{REFERENCES}
+\bibliography{refs}       % use a bibtex bibliography file refs.bib
+\bibliographystyle{plain} % use the plain bibliography style (many options here)
+
+% switch to appendix chapter numbering and include appendices
+\appendix
+\include{appendix1}
+
+\end{document}
+
diff --git a/Master/texmf-dist/doc/latex/mugsthesis/sample/refs.bib b/Master/texmf-dist/doc/latex/mugsthesis/sample/refs.bib
new file mode 100644
index 00000000000..c0b172ca0cf
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/mugsthesis/sample/refs.bib
@@ -0,0 +1,22 @@
+@STRING(PRL="Phys. Rev. Lett.")
+@STRING(RMP="Rev. Mod. Phys.")
+ 
+@ARTICLE{klitzing:qhe,
+   AUTHOR="K. von Klitzing and G. Dorda and M. Pepper",
+   TITLE="New method for high accuracy determination of fine structure
+            constant based on quantised hall resistance",
+   JOURNAL=PRL,
+   VOLUME=45,
+   PAGES=494,
+   YEAR=1980
+}
+ 
+@ARTICLE{klitzing:nobel,
+   AUTHOR="Klaus von Klitzing",
+   TITLE="The Quantised Hall Effect",
+   JOURNAL=RMP,
+   VOLUME=58,
+   PAGES=519,
+   YEAR=1986
+}
+