1 files changed, 317 insertions, 0 deletions
diff --git a/Master/texmf-dist/doc/latex/minitoc/examples/mtc-art.tex b/Master/texmf-dist/doc/latex/minitoc/examples/mtc-art.tex
new file mode 100644
index 00000000000..22b58b65d9b
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/minitoc/examples/mtc-art.tex
@@ -0,0 +1,317 @@
+%%
+%% This is file `mtc-art.tex',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% minitoc.dtx  (with options: `mtc-art')
+%% This is a generated file.
+%% 
+%% 
+%% This file may be distributed and/or modified under the conditions of
+%% the LaTeX Project Public License, either version 1.3 of this license
+%% or (at your option) any later version.  The latest version of this
+%% license is in:
+%% 
+%%    http://www.latex-project.org/lppl.txt
+%% 
+%% and version 1.3 or later is part of all distributions of LaTeX version
+%% 2003/12/01 or later.
+%% 
+%% This work has the LPPL maintenance status "unmaintained".
+%% 
+%% The Current Maintainer of this work is <none>.
+%% 
+%% This work consists of all the files listed in the file `minitoc.l'
+%% distributed with it.
+%% Copyright 1993 1994 1995 1996 1997 1998 1999 2000
+%%           2001 2002 2003 2004 2005 2006 2007 2008
+%% Jean-Pierre F. Drucbert
+%% mtc-art.tex
+%% This file contains a set of tests for minitoc
+%% package. You can alter most of parameters to test.
+%% article (\section must be defined)
+\documentclass[12pt,a4paper]{article}
+\ProvidesFile{mtc-art.tex}%
+  [2007/06/06]
+\usepackage{lipsum} % provides filling text
+%% \usepackage{hyperref}      % If used, load it BEFORE minitoc
+\usepackage[tight,insection]{minitoc}
+\setcounter{secnumdepth}{5}   % depth of numbering of sectionning commands
+\setcounter{tocdepth}{3}      % depth of table of contents
+\setlength{\stcindent}{24pt}  % indentation of secttocs, default
+%%                            % font for secttocs, default
+\renewcommand{\stcfont}{\small\rmfamily\upshape\mdseries}%
+%%                            % font for secttocs, subsections
+%% \renewcommand{\stcSSfont}{\small\sf}%
+%%                            % you can make experiments with
+%%                            % \stcSSSfont, \stcPfont and \stcSPfont
+%%                            % but it is ``fontomania''...
+\raggedbottom                 % or \flushbottom, at your choice
+%%% TEST: uncomment the next line to test
+%%% resetting section number in each part
+%%% \makeatletter \@addtoreset{section}{part} \makeatother
+%%% END TEST
+\begin{document}
+\dosecttoc
+\dosectlof[c]                   % center titles of the sectlofs
+\dosectlot
+\doparttoc                      % test of parttoc/partlof stuff
+\dopartlof                      % added in version #15
+\dopartlot                      % added in version #15
+\faketableofcontents            % or \tableofcontents
+\fakelistoffigures              % to check compatibility
+\fakelistoftables               % to check compatibility
+\part{First Part} \parttoc \partlof[r] \partlot
+\twocolumn\sloppy               % the secttoc in twocolumn layout is ugly,
+                                % but works. Ideas to make it better?
+\section{AAAAA}                 % a section with a lot of sections
+\secttoc[r]                     % secttoc title on the right
+\mtcskip \sectlof %ADDED
+\lipsum[1]
+\subsection{S1} \lipsum[2]
+\subsection{S2} \lipsum[3]
+\subsection{S3} \lipsum[4]
+\subsection*{S4}
+%% \addcontentsline{toc}{starsubsection}{*S4*}
+\lipsum[5]
+\subsection{S5} \lipsum[6]
+\subsection{S6} \lipsum[7]
+\subsection{S7} \lipsum[8]
+\subsection{S8} \lipsum[9]
+\subsection{S9} \lipsum[10]
+\subsection{S10} \lipsum[11]
+\subsection{S11} \lipsum[12]
+\subsection{S12} \lipsum[13]
+\subsection{S13} \lipsum[14]
+\subsection{S14} \lipsum[15]
+\subsection{S15} \lipsum[16]
+\subsection{S16} \lipsum[17]
+\subsection{S17} \lipsum[18]
+\subsection{S18} \lipsum[19]
+\subsection{S19} \lipsum[20]
+\subsection{S20} \lipsum[21]
+\subsection{S21} \lipsum[22]
+\subsection{S22} \lipsum[23]
+\subsection{S23} \lipsum[24]
+\subsection{S24} \lipsum[25]
+\subsection{S25} \lipsum[26]
+\subsection{S26} \lipsum[27]
+\subsection{S27} \lipsum[28]
+\subsection{S28} \lipsum[29]
+\subsection{S29} \lipsum[30]
+\subsection{S30} \lipsum[31]
+\onecolumn\fussy         % back to one column
+\section{BBBBB}
+\secttoc
+\mtcskip                 % put some skip here
+\sectlof                 % a sectlof
+\lipsum[32]
+\subsection{T1} \lipsum[33]
+\begin{figure}[t]        % tests compatibility with floating bodies
+\setlength{\unitlength}{1mm}
+\begin{picture}(100,50) \end{picture}
+\caption{F1}             % (I have not tested tables, but it is similar)
+\end{figure}
+\FloatBarrier
+\subsubsection[tt1]{TT1} % tests optional arg. of a sectionning command
+\lipsum[34]
+\paragraph{TTT1} \lipsum[35]
+\subparagraph{TTTT1} \lipsum[36]
+\begin{figure}[t]
+\setlength{\unitlength}{1mm}
+\begin{picture}(100,50) \end{picture}
+\caption[f2]{F2}         % tests optional arg. of a caption
+\end{figure}
+\FloatBarrier
+\subsection{T2} \lipsum[37]
+\section*{CCCCC}         % tests a pseudo-section. should have no secttoc
+%% \addstarredsection{CCCCC}
+\mtcaddsection[CCCCC]
+\secttoc \mtcskip \sectlof %ADDED
+\lipsum[38]
+\subsection{U1} \lipsum[39]
+\subsubsection{UU1} \lipsum[40]
+\paragraph{UUU1} \lipsum[41]
+\subparagraph{UUUU1} \lipsum[42]
+\subsection{U2} \lipsum[43]
+\part{Second Part}
+\parttoc
+\partlof[c]
+\partlot
+%%                       % the following section should have no secttoc,
+\section{DDDDD}          % but if you uncomment \secttoc,
+%% \secttoc
+\mtcskip \sectlof %ADDED
+\lipsum[44]
+\subsection{V1} \lipsum[45]
+\subsubsection{VV1} \lipsum[46]
+\paragraph{VVV1} \lipsum[47]
+\subparagraph{VVVV1} \lipsum[48]
+\begin{figure}[t]        % tests compatibility with floating bodies
+\setlength{\unitlength}{1mm}
+\begin{picture}(100,50) \end{picture}
+\caption{F3}             % (I have not tested tables, but it is similar)
+\end{figure}
+\FloatBarrier
+\lipsum[49] \subsection{V2} \lipsum[50]
+\section{EEEEE}                 % this section should have a secttoc
+{%                              % left brace, see below
+\setcounter{secttocdepth}{3}    % depth of sect table of contents;
+                                % try with different values.
+\secttoc
+\mtcskip \sectlof %ADDED
+}                               % right brace
+%% this pair of braces is used to keep local the change on secttocdepth.
+\lipsum[51]
+\subsection{W1}                 % with the given depth
+\lipsum[52]
+\subsubsection{WW1} \lipsum[53]
+\paragraph{WWW1} \lipsum[54]
+\begin{figure}[t]            % tests compatibility with floating bodies
+\setlength{\unitlength}{1mm}
+\begin{picture}(100,50) \end{picture}
+\caption{F4}                 % (I have not tested tables, but it is similar)
+\end{figure}
+\FloatBarrier
+bla bla bla bla bla bla bla bla bla bla bla
+\subparagraph{WWWW1} \lipsum[55]
+\subsection{W2} \lipsum[56]
+\chapter*{}
+\part{Appendices}
+\parttoc \mtcskip
+\partlof \mtcskip
+\partlot
+\FloatBarrier
+\appendix
+\section{Comments} \lipsum[57]
+\secttoc
+\mtcskip \sectlof %ADDED
+\subsection{C1} \lipsum[58]
+\subsection{C2} \lipsum[59]
+\subsection{C3} \lipsum[60]
+\begin{figure}[hb]        % tests compatibility with floating bodies
+\setlength{\unitlength}{1mm}
+\begin{picture}(100,50) \end{picture}
+\caption{F5}              % (I have not tested tables, but it is similar)
+\end{figure}
+\FloatBarrier
+\subsection{C4} \lipsum[61]
+\FloatBarrier
+\section{Evolution}
+\secttoc
+\sectlof % empty
+\sectlot % empty
+\lipsum[62]
+\subsection{D1} \lipsum[63] \subsection{D2} \lipsum[64]
+\subsection{D3} \lipsum[65] \subsection{D4} \lipsum[66]
+\end{document}
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+%%
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+\endinput
+%%
+%% End of file `mtc-art.tex'.