summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/doc/latex/listbib/listbib.doc
diff options
context:
space:
mode:
Diffstat (limited to 'Master/texmf-dist/doc/latex/listbib/listbib.doc')
-rw-r--r--Master/texmf-dist/doc/latex/listbib/listbib.doc2418
1 files changed, 2418 insertions, 0 deletions
diff --git a/Master/texmf-dist/doc/latex/listbib/listbib.doc b/Master/texmf-dist/doc/latex/listbib/listbib.doc
new file mode 100644
index 00000000000..89c9c9b5754
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/listbib/listbib.doc
@@ -0,0 +1,2418 @@
+% listbib.doc
+% listbib.bst
+%
+% This file was generated by Volker Kuhlmann on 10 Mar 2000
+% from the file btxbst.doc version 0.99b by Oren Patashnik
+% [ 3/23/88 (OP) Version 0.99b for BibTeX 0.99c ]
+% with the command "/lib/cpp -P -DUNSRT btxbst.doc listbib.doc".
+%
+% Then comments at the beginning of the file were edited,
+% and the essence of biblist version 1.3 by Joachim Schrod were worked in.
+% Oh yes, and some improvements were added too...
+%
+% To obtain listbib.bst, a fast-load no-comment version for bibtex, run
+% listbib.doc through the command
+% sed -e '/^%/d' -e '/^[ ]*$/d'
+% or simply install listbib.doc as listbib.bst (recommended).
+% On contemporary computers the speed increase is very negligible and the loss
+% of documentation weighs much more.
+%
+% Volker Kuhlmann
+% 10, 14, 15, 16, 19 Mar; 28 Aug 2000
+% 19 Mar 2000:
+% Inheritance check for volume (result of check is still ignored),
+% month, totalpages, URL
+% 28 Aug 2000:
+% Now not printing totalpages and URL if inherited.
+% If undefined, defining \url which takes 1 arg and expands to its arg. Load
+% package url instead!
+%
+
+% unsrt style (unsorted numbers)
+
+%
+% The ENTRY declaration
+% Like Scribe's (according to pages 231-2 of the April '84 edition),
+% but no fullauthor or editors fields because BibTeX does name handling.
+% The annote field is commented out here because this family doesn't
+% include an annotated bibliography style. And in addition to the fields
+% listed here, BibTeX has a built-in crossref field, explained later.
+
+ENTRY
+% Fields:
+ { address
+% Usually the address of a publisher or other type of organization.
+% Put information in this field only if it helps the reader find the
+% thing---for example you should omit the address of a major
+% publisher entirely. For a PROCEEDINGS or an INPROCEEDINGS,
+% however, it's the address of the conference; for those two entry
+% types, include the publisher's or organization's address, if
+% necessary, in the publisher or organization field.
+% annote
+% Long annotation---for annotated bibliographies (begins sentence).
+ annote
+% Used by listbib. Not used by the 4 standard styles, and probably
+% not used by too many other styles either.
+% Useful for storing comments about bibliographic items which are
+% not meant to end up in documents.
+ author
+% Name(s) of author(s), in BibTeX name format.
+ booktitle
+% Book title when the thing being referenced isn't the whole book.
+% For book entries, the title field should be used instead.
+ chapter
+% Chapter (or section or whatever) number.
+ edition
+% Edition of a book---should be an ordinal (e.g., "Second").
+ editor
+% Name(s) of editor(s), in BibTeX name format.
+% If there is also an author field, then the editor field should be
+% for the book or collection that the work appears in.
+ howpublished
+% How something strange has been published (begins sentence).
+ institution
+% Sponsoring institution of a technical report.
+ isbn
+ issn
+% The obvious purpose...
+ journal
+% Journal name (macros are provided for many).
+ key
+% Alphabetizing, labeling, and cross-referencing key
+% (needed when an entry has no author or editor).
+ library
+% Location of the bibliographic item. This is useful for noting where
+% in a library a book is. This is not meant to be printed in
+% documents of course.
+ month
+% Month (macros are provided).
+ note
+% To help the reader find a reference (begins sentence).
+ number
+% Number of a journal or technical report, or of a work in a series.
+ organization
+% Organization sponsoring a conference (or publishing a manual); if
+% the editor (or author) is empty, and if the organization produces
+% an awkward label or cross reference, you should put appropriately
+% condensed organization information in the key field as well.
+ pages
+% Page number or numbers (use `--' to separate a range, use `+'
+% to indicate pages following that don't form a simple range).
+ publisher
+% Publisher name.
+ school
+% School name (for theses).
+ series
+% The name of a series or set of books.
+% An individual book will will also have it's own title.
+ title
+% The title of the thing you're referred to.
+ totalpages
+% Total number of pages of the work.
+% Is this what custom-bib uses it for?
+ type
+% Type of a Techreport (e.g., "Research Note") to be used instead of
+% the default "Technical Report"; or, similarly, the type of a
+% thesis; or of a part of a book.
+ url
+% The URL of an entry which is an electronic document.
+% Is this what custom-bib uses it for?
+ volume
+% The volume number of a journal or multivolume work.
+ year
+% The year should contain only numerals (technically, it should end
+% with four numerals, after purification; doesn't a begin sentence).
+ }
+%
+% Integer entry variables
+ {
+ num.entry
+% The cardinal number of the entry in the data base.
+% Checking for inheritance requires a resort; this number can be used
+% to restore the original sort order.
+ inherited.note
+ inherited.annote
+ inherited.isbn
+ inherited.issn
+ inherited.library
+ inherited.volume
+ inherited.month
+ inherited.totalpages
+ inherited.url
+% Flags which, when set, indicate that the respective field is
+% inherited from another crossref'ed entry.
+ }
+%
+% String entry variables
+ {
+ label
+ sort.label
+ }
+
+
+% These three functions pop one or two (integer) arguments from the stack
+% and push a single one, either 0 or 1.
+% The 'skip$ in the `and' and `or' functions are used because
+% the corresponding if$ would be idempotent
+
+FUNCTION {not}
+{ { #0 }
+ { #1 }
+ if$
+}
+
+FUNCTION {and}
+{ 'skip$
+ { pop$ #0 }
+ if$
+}
+
+FUNCTION {or}
+{ { pop$ #1 }
+ 'skip$
+ if$
+}
+
+% Each entry function starts by calling output.bibitem, to write the
+% \bibitem and its arguments to the .BBL file. Then the various fields
+% are formatted and printed by output or output.check. Those functions
+% handle the writing of separators (commas, periods, \newblock's),
+% taking care not to do so when they are passed a null string.
+% Finally, fin.entry is called to add the final period and finish the
+% entry.
+%
+% A bibliographic reference is formatted into a number of `blocks':
+% in the open format, a block begins on a new line and subsequent
+% lines of the block are indented. A block may contain more than
+% one sentence (well, not a grammatical sentence, but something to
+% be ended with a sentence ending period). The entry functions should
+% call new.block whenever a block other than the first is about to be
+% started. They should call new.sentence whenever a new sentence is
+% to be started. The output functions will ensure that if two
+% new.sentence's occur without any non-null string being output between
+% them then there won't be two periods output. Similarly for two
+% successive new.block's.
+%
+% The output routines don't write their argument immediately.
+% Instead, by convention, that argument is saved on the stack to be
+% output next time (when we'll know what separator needs to come
+% after it). Meanwhile, the output routine has to pop the pending
+% output off the stack, append any needed separator, and write it.
+%
+% To tell which separator is needed, we maintain an output.state.
+% It will be one of these values:
+% before.all just after the \bibitem
+% mid.sentence in the middle of a sentence: comma needed
+% if more sentence is output
+% after.sentence just after a sentence: period needed
+% after.block just after a block (and sentence):
+% period and \newblock needed.
+% Note: These styles don't use after.sentence
+%
+% VAR: output.state : INTEGER -- state variable for output
+%
+% The output.nonnull function saves its argument (assumed to be nonnull)
+% on the stack, and writes the old saved value followed by any needed
+% separator. The ordering of the tests is decreasing frequency of
+% occurrence.
+%
+% output.nonnull(s) ==
+% BEGIN
+% s := argument on stack
+% if output.state = mid.sentence then
+% write$(pop() * ", ")
+% -- "pop" isn't a function: just use stack top
+% else
+% if output.state = after.block then
+% write$(add.period$(pop()))
+% newline$
+% write$("\newblock ")
+% else
+% if output.state = before.all then
+% write$(pop())
+% else -- output.state should be after.sentence
+% write$(add.period$(pop()) * " ")
+% fi
+% fi
+% output.state := mid.sentence
+% fi
+% push s on stack
+% END
+%
+% The output function calls output.nonnull if its argument is non-empty;
+% its argument may be a missing field (thus, not necessarily a string)
+%
+% output(s) ==
+% BEGIN
+% if not empty$(s) then output.nonnull(s)
+% fi
+% END
+%
+% The output.check function is the same as the output function except that, if
+% necessary, output.check warns the user that the t field shouldn't be empty
+% (this is because it probably won't be a good reference without the field;
+% the entry functions try to make the formatting look reasonable even when
+% such fields are empty).
+%
+% output.check(s,t) ==
+% BEGIN
+% if empty$(s) then
+% warning$("empty " * t * " in " * cite$)
+% else output.nonnull(s)
+% fi
+% END
+%
+% The output.bibitem function writes the \bibitem for the current entry
+% (the label should already have been set up), and sets up the separator
+% state for the output functions. And, it leaves a string on the stack
+% as per the output convention.
+%
+% output.bibitem ==
+% BEGIN
+% newline$
+% write$("\bibitem[") % for alphabetic labels,
+% write$(label) % these three lines
+% write$("]{") % are used
+% write$("\bibitem{") % this line for numeric labels
+% write$(cite$)
+% write$("}")
+% push "" on stack
+% output.state := before.all
+% END
+%
+% The fin.entry function finishes off an entry by adding a period to the
+% string remaining on the stack. If the state is still before.all
+% then nothing was produced for this entry, so the result will look bad,
+% but the user deserves it. (We don't omit the whole entry because the
+% entry was cited, and a bibitem is needed to define the citation label.)
+%
+% fin.entry ==
+% BEGIN
+% write$(add.period$(pop()))
+% newline$
+% END
+%
+% The new.block function prepares for a new block to be output, and
+% new.sentence prepares for a new sentence.
+%
+% new.block ==
+% BEGIN
+% if output.state <> before.all then
+% output.state := after.block
+% fi
+% END
+%
+% new.sentence ==
+% BEGIN
+% if output.state <> after.block then
+% if output.state <> before.all then
+% output.state := after.sentence
+% fi
+% fi
+% END
+%
+
+INTEGERS { output.state before.all mid.sentence after.sentence after.block }
+
+FUNCTION {init.state.consts}
+{ #0 'before.all :=
+ #1 'mid.sentence :=
+ #2 'after.sentence :=
+ #3 'after.block :=
+}
+
+% the variables s and t are temporary string holders
+
+STRINGS { s t }
+
+FUNCTION {output.nonnull}
+{ 's :=
+ output.state mid.sentence =
+ { ", " * write$ }
+ { output.state after.block =
+ { add.period$ write$
+ newline$
+ "\newblock " write$
+ }
+ { output.state before.all =
+ 'write$
+ { add.period$ " " * write$ }
+ if$
+ }
+ if$
+ mid.sentence 'output.state :=
+ }
+ if$
+ s
+}
+
+FUNCTION {output}
+{ duplicate$ empty$
+ 'pop$
+ 'output.nonnull
+ if$
+}
+
+FUNCTION {output.check}
+{ 't :=
+ duplicate$ empty$
+ { pop$ "empty " t * " in " * cite$ * warning$ }
+ 'output.nonnull
+ if$
+}
+
+FUNCTION {output.bibitem}
+{ newline$
+
+ "\bibitem{" write$
+
+ cite$ write$
+ "}" write$
+ newline$
+ ""
+ before.all 'output.state :=
+}
+
+% This function finishes all entries.
+
+FUNCTION {fin.entry}
+{ add.period$
+ write$
+ newline$
+}
+
+FUNCTION {new.block}
+{ output.state before.all =
+ 'skip$
+ { after.block 'output.state := }
+ if$
+}
+
+FUNCTION {new.sentence}
+{ output.state after.block =
+ 'skip$
+ { output.state before.all =
+ 'skip$
+ { after.sentence 'output.state := }
+ if$
+ }
+ if$
+}
+
+% Sometimes we begin a new block only if the block will be big enough. The
+% new.block.checka function issues a new.block if its argument is nonempty;
+% new.block.checkb does the same if either of its TWO arguments is nonempty.
+
+FUNCTION {new.block.checka}
+{ empty$
+ 'skip$
+ 'new.block
+ if$
+}
+
+FUNCTION {new.block.checkb}
+{ empty$
+ swap$ empty$
+ and
+ 'skip$
+ 'new.block
+ if$
+}
+
+% The new.sentence.check functions are analogous.
+
+FUNCTION {new.sentence.checka}
+{ empty$
+ 'skip$
+ 'new.sentence
+ if$
+}
+
+FUNCTION {new.sentence.checkb}
+{ empty$
+ swap$ empty$
+ and
+ 'skip$
+ 'new.sentence
+ if$
+}
+
+% Here are some functions for formatting chunks of an entry.
+% By convention they either produce a string that can be followed by
+% a comma or period (using add.period$, so it is OK to end in a period),
+% or they produce the null string.
+%
+% A useful utility is the field.or.null function, which checks if the
+% argument is the result of pushing a `missing' field (one for which no
+% assignment was made when the current entry was read in from the database)
+% or the result of pushing a string having no non-white-space characters.
+% It returns the null string if so, otherwise it returns the field string.
+% Its main (but not only) purpose is to guarantee that what's left on the
+% stack is a string rather than a missing field.
+%
+% field.or.null(s) ==
+% BEGIN
+% if empty$(s) then return ""
+% else return s
+% END
+%
+% Another helper function is emphasize, which returns the argument emphazised,
+% if that is non-empty, otherwise it returns the null string. Italic
+% corrections aren't used, so this function should be used when punctation
+% will follow the result.
+% LaTeX's \emph{} will take care of italic correction.
+%
+% emphasize(s) ==
+% BEGIN
+% if empty$(s) then return ""
+% %else return "{\em " * s * "}"
+% else return "\emph{" * s * "}"
+%
+% The format.names function formats the argument (which should be in
+% BibTeX name format) into "First Von Last, Junior", separated by commas
+% and with an "and" before the last (but ending with "et~al." if the last
+% of multiple authors is "others"). This function's argument should always
+% contain at least one name.
+%
+% VAR: nameptr, namesleft, numnames: INTEGER
+% pseudoVAR: nameresult: STRING (it's what's accumulated on the stack)
+%
+% format.names(s) ==
+% BEGIN
+% nameptr := 1
+% numnames := num.names$(s)
+% namesleft := numnames
+% while namesleft > 0
+% do
+% % for full names:
+% t := format.name$(s, nameptr, "{ff~}{vv~}{ll}{, jj}")
+% % for abbreviated first names:
+% t := format.name$(s, nameptr, "{f.~}{vv~}{ll}{, jj}")
+% if nameptr > 1 then
+% if namesleft > 1 then nameresult := nameresult * ", " * t
+% else if numnames > 2
+% then nameresult := nameresult * ","
+% fi
+% if t = "others"
+% then nameresult := nameresult * " et~al."
+% else nameresult := nameresult * " and " * t
+% fi
+% fi
+% else nameresult := t
+% fi
+% nameptr := nameptr + 1
+% namesleft := namesleft - 1
+% od
+% return nameresult
+% END
+%
+% The format.authors function returns the result of format.names(author)
+% if the author is present, or else it returns the null string
+%
+% format.authors ==
+% BEGIN
+% if empty$(author) then return ""
+% else return format.names(author)
+% fi
+% END
+%
+% Format.editors is like format.authors, but it uses the editor field,
+% and appends ", editor" or ", editors"
+%
+% format.editors ==
+% BEGIN
+% if empty$(editor) then return ""
+% else
+% if num.names$(editor) > 1 then
+% return format.names(editor) * ", editors"
+% else
+% return format.names(editor) * ", editor"
+% fi
+% fi
+% END
+%
+% Other formatting functions are similar, so no "comment version" will be
+% given for them.
+%
+% The `pop$' in this function gets rid of the duplicate `empty' value and
+% the `skip$' returns the duplicate field value
+
+FUNCTION {field.or.null}
+{ duplicate$ empty$
+ { pop$ "" }
+ 'skip$
+ if$
+}
+
+FUNCTION {emphasize}
+{ duplicate$ empty$
+ { pop$ "" }
+ %%{ "{\em " swap$ * "}" * }
+ { "\emph{" swap$ * "}" * }
+ if$
+}
+
+INTEGERS { nameptr namesleft numnames }
+
+FUNCTION {format.names}
+{ 's :=
+ #1 'nameptr :=
+ s num.names$ 'numnames :=
+ numnames 'namesleft :=
+ { namesleft #0 > }
+
+ { s nameptr "{ff~}{vv~}{ll}{, jj}" format.name$ 't :=
+
+ nameptr #1 >
+ { namesleft #1 >
+ { ", " * t * }
+ { numnames #2 >
+ { "," * }
+ 'skip$
+ if$
+ t "others" =
+ { " et~al." * }
+ { " and " * t * }
+ if$
+ }
+ if$
+ }
+ 't
+ if$
+ nameptr #1 + 'nameptr :=
+ namesleft #1 - 'namesleft :=
+ }
+ while$
+}
+
+FUNCTION {format.authors}
+{ author empty$
+ { "" }
+ { author format.names }
+ if$
+}
+
+FUNCTION {format.editors}
+{ editor empty$
+ { "" }
+ { editor format.names
+ editor num.names$ #1 >
+ { ", editors" * }
+ { ", editor" * }
+ if$
+ }
+ if$
+}
+
+% Format note.
+% Need to introduce this because we check whether it's inherited.
+
+FUNCTION {note.output}
+{ inherited.note
+ { }
+ { note output }
+ if$
+}
+
+% Format totalpages and URL.
+
+FUNCTION {format.totalpages}
+{ totalpages empty$
+ { "" }
+ { "Pages: " totalpages * }
+ if$
+}
+
+FUNCTION {format.url}
+{ url empty$
+ { "" }
+ { "URL: \url{" url * "}" * }
+ if$
+}
+
+FUNCTION {check.bullet}
+{ duplicate$ empty$
+ 'skip$
+ { " \ensuremath{\bullet} " * }
+ if$
+}
+
+FUNCTION {check.par}
+{ duplicate$ empty$
+ 'skip$
+ { "\par " * }
+ if$
+}
+
+FUNCTION {format.totalpages.url}
+{ totalpages missing$
+ inherited.totalpages
+ or
+ { "" }
+ { format.totalpages }
+ if$
+ url missing$
+ inherited.url
+ or
+ { }
+ { check.bullet
+ format.url * }
+ if$
+ %check.par
+}
+
+FUNCTION {output.totalpages.url}
+{ new.block output
+ newline$ "\annote " write$
+ write$
+ %newline$
+ "\endannote"
+}
+
+% Deal with annote.
+% This will also output totalpages and URL.
+
+FUNCTION {output.annote}
+{ new.block "\annote " output
+ newline$ write$
+ annote add.period$ write$ newline$
+ "\endannote"
+}
+
+FUNCTION {annote.output}
+{ format.totalpages.url
+ duplicate$ empty$
+ 'pop$
+ { output.totalpages.url }
+ if$
+ %
+ annote empty$
+ inherited.annote
+ or
+ 'skip$
+ { output.annote }
+ if$
+}
+
+% Formatting + outputting ISBN and ISSN
+
+FUNCTION {format.isbn}
+{ isbn empty$
+ { "" }
+ { new.sentence "ISBN~" isbn * }
+ if$
+}
+
+FUNCTION {format.issn}
+{ issn empty$
+ { "" }
+ { new.sentence "ISSN~" issn * }
+ if$
+}
+
+FUNCTION {isbn.output}
+{ inherited.isbn
+ { "" }
+ { format.isbn }
+ if$
+ output
+}
+
+FUNCTION {issn.output}
+{ inherited.issn
+ { "" }
+ { format.issn }
+ if$
+ output
+}
+
+FUNCTION {isbn.issn.output}
+{ %% both isbn and issn, but not both inherited
+ isbn empty$ not
+ issn empty$ not
+ and
+ inherited.isbn
+ inherited.issn
+ and not and
+ { "used both ISBN and ISSN fields in " cite$ * warning$ }
+ 'skip$
+ if$
+ isbn.output
+ issn.output
+}
+
+% Formatting library
+% We need to check and possibly alter the output state to avoid a period
+% being output after the library part.
+% In fact, we can't call output (because it can never work in this case),
+% instead we write to the output buffer ourselves and set the output.state
+% to something useful.
+
+FUNCTION {format.library}
+{ library empty$
+ { "" }
+ { "\library{" library * "}" * }
+ if$
+}
+
+FUNCTION {library.output}
+{ % "checking lib out stat" top$ %% debug
+ inherited.library
+ { "" }
+ { format.library }
+ if$
+ duplicate$ empty$
+ { output }
+ { "%" * write$ newline$
+ before.all 'output.state :=
+ }
+ if$
+}
+
+% The format.title function is used for non-book-like titles.
+% For most styles we convert to lowercase (except for the very first letter,
+% and except for the first one after a colon (followed by whitespace)),
+% and hope the user has brace-surrounded words that need to stay capitilized;
+% for some styles, however, we leave it as it is in the database.
+
+FUNCTION {format.title}
+{ title empty$
+ { "" }
+
+% { title "t" change.case$ }
+ 'title
+
+ if$
+}
+
+% By default, BibTeX sets the global integer variable global.max$ to the BibTeX
+% constant glob_str_size, the maximum length of a global string variable.
+% Analogously, BibTeX sets the global integer variable entry.max$ to
+% ent_str_size, the maximum length of an entry string variable.
+% The style designer may change these if necessary (but this is unlikely)
+
+% The n.dashify function makes each single `-' in a string a double `--'
+% if it's not already
+%
+% pseudoVAR: pageresult: STRING (it's what's accumulated on the stack)
+%
+% n.dashify(s) ==
+% BEGIN
+% t := s
+% pageresult := ""
+% while (not empty$(t))
+% do
+% if (first character of t = "-")
+% then
+% if (next character isn't)
+% then
+% pageresult := pageresult * "--"
+% t := t with the "-" removed
+% else
+% while (first character of t = "-")
+% do
+% pageresult := pageresult * "-"
+% t := t with the "-" removed
+% od
+% fi
+% else
+% pageresult := pageresult * the first character
+% t := t with the first character removed
+% fi
+% od
+% return pageresult
+% END
+
+FUNCTION {n.dashify}
+{ 't :=
+ ""
+ { t empty$ not }
+ { t #1 #1 substring$ "-" =
+ { t #1 #2 substring$ "--" = not
+ { "--" *
+ t #2 global.max$ substring$ 't :=
+ }
+ { { t #1 #1 substring$ "-" = }
+ { "-" *
+ t #2 global.max$ substring$ 't :=
+ }
+ while$
+ }
+ if$
+ }
+ { t #1 #1 substring$ *
+ t #2 global.max$ substring$ 't :=
+ }
+ if$
+ }
+ while$
+}
+
+% The format.date function is for the month and year, but we give a warning if
+% there's an empty year but the month is there, and we return the empty string
+% if they're both empty.
+
+FUNCTION {format.date}
+{ year empty$
+ { month empty$
+ inherited.month
+ or
+ { "" }
+ { "there's a month but no year in " cite$ * warning$
+ month
+ }
+ if$
+ }
+ { month empty$
+ inherited.month
+ or
+ 'year
+ { month " " * year * }
+ if$
+ }
+ if$
+}
+
+% The format.btitle is for formatting the title field when it is a book-like
+% entry---the style used here keeps it in uppers-and-lowers and emphasizes it.
+
+FUNCTION {format.btitle}
+{ title emphasize
+}
+
+% For several functions we'll need to connect two strings with a
+% tie (~) if the second one isn't very long (fewer than 3 characters).
+% The tie.or.space.connect function does that. It concatenates the two
+% strings on top of the stack, along with either a tie or space between
+% them, and puts this concatenation back onto the stack:
+%
+% tie.or.space.connect(str1,str2) ==
+% BEGIN
+% if text.length$(str2) < 3
+% then return the concatenation of str1, "~", and str2
+% else return the concatenation of str1, " ", and str2
+% END
+
+FUNCTION {tie.or.space.connect}
+{ duplicate$ text.length$ #3 <
+ { "~" }
+ { " " }
+ if$
+ swap$ * *
+}
+
+% The either.or.check function complains if both fields of an either-or pair
+% are nonempty.
+%
+% either.or.check(t,s) ==
+% BEGIN
+% if not empty$(s) then
+% warning$(can't use both " * t * " fields in " * cite$)
+% fi
+% END
+
+FUNCTION {either.or.check}
+{ empty$
+ 'pop$
+ { "can't use both " swap$ * " fields in " * cite$ * warning$ }
+ if$
+}
+
+% The format.bvolume function is for formatting the volume and perhaps
+% series name of a multivolume work. If both a volume and a series field
+% are there, we assume the series field is the title of the whole multivolume
+% work (the title field should be the title of the thing being referred to),
+% and we add an "of <series>". This function is called in mid-sentence.
+
+FUNCTION {format.bvolume}
+{ volume empty$
+ { "" }
+ { "volume" volume tie.or.space.connect
+ series empty$
+ 'skip$
+ { " of " * series emphasize * }
+ if$
+ "volume and number" number either.or.check
+ }
+ if$
+}
+
+% The format.number.series function is for formatting the series name
+% and perhaps number of a work in a series. This function is similar to
+% format.bvolume, although for this one the series must exist (and the
+% volume must not exist). If the number field is empty we output either
+% the series field unchanged if it exists or else the null string.
+% If both the number and series fields are there we assume the series field
+% gives the name of the whole series (the title field should be the title
+% of the work being one referred to), and we add an "in <series>".
+% We capitilize Number when this function is used at the beginning of a block.
+
+FUNCTION {format.number.series}
+{ volume empty$
+ { number empty$
+ { series field.or.null }
+ { output.state mid.sentence =
+ { "number" }
+ { "Number" }
+ if$
+ number tie.or.space.connect
+ series empty$
+ { "there's a number but no series in " cite$ * warning$ }
+ { " in " * series * }
+ if$
+ }
+ if$
+ }
+ { "" }
+ if$
+}
+
+% The format.edition function appends " edition" to the edition, if present.
+% We lowercase the edition (it should be something like "Third"), because
+% this doesn't start a sentence.
+
+FUNCTION {format.edition}
+{ edition empty$
+ { "" }
+ { output.state mid.sentence =
+ { edition "l" change.case$ " edition" * }
+ { edition "t" change.case$ " edition" * }
+ if$
+ }
+ if$
+}
+
+% The format.pages function is used for formatting a page range in a book
+% (and in rare circumstances, an article).
+%
+% The multi.page.check function examines the page field for a "-" or "," or "+"
+% so that format.pages can use "page" instead of "pages" if none exists.
+% Note: global.max$ here means "take the rest of the string"
+%
+% VAR: multiresult: INTEGER (actually, a boolean)
+%
+% multi.page.check(s) ==
+% BEGIN
+% t := s
+% multiresult := false
+% while ((not multiresult) and (not empty$(t)))
+% do
+% if (first character of t = "-" or "," or "+")
+% then multiresult := true
+% else t := t with the first character removed
+% fi
+% od
+% return multiresult
+% END
+
+INTEGERS { multiresult }
+
+FUNCTION {multi.page.check}
+{ 't :=
+ #0 'multiresult :=
+ { multiresult not
+ t empty$ not
+ and
+ }
+ { t #1 #1 substring$
+ duplicate$ "-" =
+ swap$ duplicate$ "," =
+ swap$ "+" =
+ or or
+ { #1 'multiresult := }
+ { t #2 global.max$ substring$ 't := }
+ if$
+ }
+ while$
+ multiresult
+}
+
+% This function doesn't begin a sentence so "pages" isn't capitalized.
+% Other functions that use this should keep that in mind.
+
+FUNCTION {format.pages}
+{ pages empty$
+ { "" }
+ { pages multi.page.check
+ { "pages" pages n.dashify tie.or.space.connect }
+ { "page" pages tie.or.space.connect }
+ if$
+ }
+ if$
+}
+
+% The format.vol.num.pages function is for the volume, number, and page range
+% of a journal article. We use the format: vol(number):pages, with some
+% variations for empty fields. This doesn't begin a sentence.
+
+FUNCTION {format.vol.num.pages}
+{ volume field.or.null
+ number empty$
+ 'skip$
+ { "(" number * ")" * *
+ volume empty$
+ { "there's a number but no volume in " cite$ * warning$ }
+ 'skip$
+ if$
+ }
+ if$
+ pages empty$
+ 'skip$
+ { duplicate$ empty$
+ { pop$ format.pages }
+ { ":" * pages n.dashify * }
+ if$
+ }
+ if$
+}
+
+
+% The format.chapter.pages, if the chapter is present, puts whatever is in the
+% type field (or else "chapter" if type is empty) in front of a chapter number.
+% It then appends the pages, if present. This doesn't begin a sentence.
+
+FUNCTION {format.chapter.pages}
+{ chapter empty$
+ 'format.pages
+ { type empty$
+ { "chapter" }
+ { type "l" change.case$ }
+ if$
+ chapter tie.or.space.connect
+ pages empty$
+ 'skip$
+ { ", " * format.pages * }
+ if$
+ }
+ if$
+}
+
+% The format.in.ed.booktitle function is used for starting out a sentence
+% that begins "In <booktitle>", putting an editor before the title if one
+% exists.
+
+FUNCTION {format.in.ed.booktitle}
+{ booktitle empty$
+ { "" }
+ { editor empty$
+ { "In " booktitle emphasize * }
+ { "In " format.editors * ", " * booktitle emphasize * }
+ if$
+ }
+ if$
+}
+
+% The function empty.misc.check complains if all six fields are empty, and
+% if there's been no sorting or alphabetic-label complaint.
+
+FUNCTION {empty.misc.check}
+{ author empty$ title empty$ howpublished empty$
+ month empty$ year empty$ note empty$
+ and and and and and
+
+
+
+ { "all relevant fields are empty in " cite$ * warning$ }
+ 'skip$
+ if$
+}
+
+% The function format.thesis.type returns either the (case-changed) type field,
+% if it is defined, or else the default string already on the stack
+% (like "Master's thesis" or "PhD thesis").
+
+FUNCTION {format.thesis.type}
+{ type empty$
+ 'skip$
+ { pop$
+ type "t" change.case$
+ }
+ if$
+}
+
+% The function format.tr.number makes a string starting with "Technical Report"
+% (or type, if that field is defined), followed by the number if there is one;
+% it returns the starting part (with a case change) even if there is no number.
+% This is used at the beginning of a sentence.
+
+FUNCTION {format.tr.number}
+{ type empty$
+ { "Technical Report" }
+ 'type
+ if$
+ number empty$
+ { "t" change.case$ }
+ { number tie.or.space.connect }
+ if$
+}
+
+% Now come the cross-referencing functions (these are invoked because
+% one entry in the database file(s) cross-references another, by giving
+% the other entry's database key in a `crossref' field). This feature
+% allows one or more titled things that are part of a larger titled
+% thing to cross-reference the larger thing. These styles allow for
+% five posibilities: (1) an ARTICLE may cross-reference an ARTICLE;
+% (2) a BOOK, (3) INBOOK, or (4) INCOLLECTION may cross-reference a BOOK;
+% or (5) an INPROCEEDINGS may cross-reference a PROCEEDINGS.
+% Each of these is explained in more detail later.
+%
+% An ARTICLE entry type may cross reference another ARTICLE (this is
+% intended for when an entire journal is devoted to a single topic---
+% but since there is no JOURNAL entry type, the journal, too, should be
+% classified as an ARTICLE but without the author and title fields).
+% This will result in two warning messages for the journal's entry
+% if it's included in the reference list, but such is life.
+%
+% format.article.crossref ==
+% BEGIN
+% if empty$(key) then
+% if empty$(journal) then
+% warning$("need key or journal for " * cite$ *
+% " to crossref " * crossref)
+% return(" \cite{" * crossref * "}")
+% else
+% return("In " * emphazise.correct (journal) *
+% " \cite{" * crossref * "}")
+% fi
+% else
+% return("In " * key * " \cite{" * crossref * "}")
+% fi
+% END
+%
+% The other cross-referencing functions are similar, so no "comment version"
+% will be given for them.
+
+FUNCTION {format.article.crossref}
+{ key empty$
+ { journal empty$
+ { "need key or journal for " cite$ * " to crossref " * crossref *
+ warning$
+ ""
+ }
+ %{ "In {\em " journal * "\/}" * }
+ { "In " journal emphasize * }
+ if$
+ }
+ { "In " key * }
+ if$
+ " \cite{" * crossref * "}" *
+}
+
+% We use just the last names of editors for a cross reference: either
+% "editor", or "editor1 and editor2", or "editor1 et~al." depending on
+% whether there are one, or two, or more than two editors.
+
+FUNCTION {format.crossref.editor}
+{ editor #1 "{vv~}{ll}" format.name$
+ editor num.names$ duplicate$
+ #2 >
+ { pop$ " et~al." * }
+ { #2 <
+ 'skip$
+ { editor #2 "{ff }{vv }{ll}{ jj}" format.name$ "others" =
+ { " et~al." * }
+ { " and " * editor #2 "{vv~}{ll}" format.name$ * }
+ if$
+ }
+ if$
+ }
+ if$
+}
+
+% A BOOK (or INBOOK) entry type (assumed to be for a single volume in a
+% multivolume work) may cross reference another BOOK (the entire multivolume).
+% Usually there will be an editor, in which case we use that to construct the
+% cross reference; otherwise we use a nonempty key field or else the series
+% field (since the series gives the title of the multivolume work).
+
+FUNCTION {format.book.crossref}
+{ volume empty$
+ { % We have a problem here: this function is called from both book and
+ % inbook when there is a crossref. While it makes sense to warn about an
+ % empty volume for a book which crossreferences another book (e.g. when
+ % it is volume N of a multivolume work), this does not hold for inbook.
+ % An inbook is a part of a book; a volume doesn't make sense (even
+ % less warning about one).
+ % Solution: disable warning for inbook. [VK Mar 2000]
+ %"empty volume in " cite$ * "'s crossref of " * crossref * warning$
+ type$ "inbook" =
+ 'skip$
+ { "empty volume in " cite$ * "'s crossref of " * crossref * warning$ }
+ if$
+ "In "
+ }
+ { "Volume" volume tie.or.space.connect
+ " of " *
+ }
+ if$
+ editor empty$
+ editor field.or.null author field.or.null =
+ or
+ { key empty$
+ { series empty$
+ { "need editor, key, or series for " cite$ * " to crossref " *
+ crossref * warning$
+ "" *
+ }
+ %{ "{\em " * series * "\/}" * }
+ { series emphasize * }
+ if$
+ }
+ { key * }
+ if$
+ }
+ { format.crossref.editor * }
+ if$
+ " \cite{" * crossref * "}" *
+}
+
+% An INCOLLECTION entry type may cross reference a BOOK (assumed to be the
+% collection), or an INPROCEEDINGS may cross reference a PROCEEDINGS.
+% Often there will be an editor, in which case we use that to construct
+% the cross reference; otherwise we use a nonempty key field or else
+% the booktitle field (which gives the cross-referenced work's title).
+
+FUNCTION {format.incoll.inproc.crossref}
+{ editor empty$
+ editor field.or.null author field.or.null =
+ or
+ { key empty$
+ { booktitle empty$
+ { "need editor, key, or booktitle for " cite$ * " to crossref " *
+ crossref * warning$
+ ""
+ }
+ %{ "In {\em " booktitle * "\/}" * }
+ { "In " booktitle emphasize * }
+ if$
+ }
+ { "In " key * }
+ if$
+ }
+ { "In " format.crossref.editor * }
+ if$
+ " \cite{" * crossref * "}" *
+}
+
+% Now we define the type functions for all entry types that may appear
+% in the .BIB file---e.g., functions like `article' and `book'. These
+% are the routines that actually generate the .BBL-file output for
+% the entry. These must all precede the READ command. In addition, the
+% style designer should have a function `default.type' for unknown types.
+% Note: The fields (within each list) are listed in order of appearance,
+% except as described for an `inbook' or a `proceedings'.
+%
+% The article function is for an article in a journal. An article may
+% CROSSREF another article.
+% Required fields: author, title, journal, year
+% Optional fields: volume, number, pages, month, note
+% Also optional: library, issn, annote
+%
+% article ==
+% BEGIN
+% output.bibitem
+% output.check(format.authors,"author")
+% new.block
+% output.check(format.title,"title")
+% new.block
+% if missing$(crossref) then
+% output.check(emphasize(journal),"journal")
+% output(format.vol.num.pages)
+% output.check(format.date,"year")
+% else
+% output.nonnull(format.article.crossref)
+% output(format.pages)
+% fi
+% new.block
+% output(note)
+% fin.entry
+% END
+%
+% The book function is for a whole book. A book may CROSSREF another book.
+% Required fields: author or editor, title, publisher, year
+% Optional fields: volume or number, series, address, edition, month,
+% note
+% Also optional: library, isbn, issn, annote
+%
+% book ==
+% BEGIN
+% if empty$(author) then output.check(format.editors,"author and editor")
+% else output.check(format.authors,"author")
+% if missing$(crossref) then
+% either.or.check("author and editor",editor)
+% fi
+% fi
+% new.block
+% output.check(format.btitle,"title")
+% if missing$(crossref) then
+% output(format.bvolume)
+% new.block
+% output(format.number.series)
+% new.sentence
+% output.check(publisher,"publisher")
+% output(address)
+% else
+% new.block
+% output.nonnull(format.book.crossref)
+% fi
+% output(format.edition)
+% output.check(format.date,"year")
+% new.block
+% output(note)
+% fin.entry
+% END
+%
+% The other entry functions are all quite similar, so no "comment version"
+% will be given for them.
+
+FUNCTION {article}
+{ output.bibitem
+ library.output
+ new.sentence
+ format.authors "author" output.check
+ new.block
+ format.title "title" output.check
+ new.block
+ crossref missing$
+ { journal emphasize "journal" output.check
+ format.vol.num.pages output
+ format.date "year" output.check
+ }
+ { format.article.crossref output.nonnull
+ format.pages output
+ }
+ if$
+ issn.output
+ new.block
+ note.output
+ annote.output
+ fin.entry
+}
+
+FUNCTION {book}
+{ output.bibitem
+ library.output
+ new.sentence
+ author empty$
+ { format.editors "author and editor" output.check }
+ { format.authors output.nonnull
+ crossref missing$
+ { "author and editor" editor either.or.check }
+ 'skip$
+ if$
+ }
+ if$
+ new.block
+ format.btitle "title" output.check
+ crossref missing$
+ { format.bvolume output
+ new.block
+ format.number.series output
+ new.sentence
+ publisher "publisher" output.check
+ address output
+ }
+ { new.block
+ format.book.crossref output.nonnull
+ }
+ if$
+ format.edition output
+ format.date "year" output.check
+ isbn.issn.output
+ new.block
+ note.output
+ annote.output
+ fin.entry
+}
+
+% A booklet is a bound thing without a publisher or sponsoring institution.
+% Required: title
+% Optional: author, howpublished, address, month, year, note
+% Also optional: library, isbn, issn, annote
+
+FUNCTION {booklet}
+{ output.bibitem
+ library.output
+ new.sentence
+ format.authors output
+ new.block
+ format.title "title" output.check
+ howpublished address new.block.checkb
+ howpublished output
+ address output
+ format.date output
+ isbn.issn.output
+ new.block
+ note.output
+ annote.output
+ fin.entry
+}
+
+% For the conference entry type, see inproceedings.
+
+% An inbook is a piece of a book: either a chapter and/or a page range.
+% It may CROSSREF a book. If there's no volume field, the type field
+% will come before number and series.
+% Required: author or editor, title, chapter and/or pages, publisher,year
+% Optional: volume or number, series, type, address, edition, month, note
+% Also optional: library, isbn, issn, annote
+
+FUNCTION {inbook}
+{ output.bibitem
+ library.output
+ new.sentence
+ author empty$
+ { format.editors "author and editor" output.check }
+ { format.authors output.nonnull
+ crossref missing$
+ { "author and editor" editor either.or.check }
+ 'skip$
+ if$
+ }
+ if$
+ new.block
+ format.btitle "title" output.check
+ crossref missing$
+ { format.bvolume output
+ format.chapter.pages "chapter and pages" output.check
+ new.block
+ format.number.series output
+ new.sentence
+ publisher "publisher" output.check
+ address output
+ }
+ { format.chapter.pages "chapter and pages" output.check
+ new.block
+ format.book.crossref output.nonnull
+ }
+ if$
+ format.edition output
+ format.date "year" output.check
+ isbn.issn.output
+ new.block
+ note.output
+ annote.output
+ fin.entry
+}
+
+% An incollection is like inbook, but where there is a separate title
+% for the referenced thing (and perhaps an editor for the whole).
+% An incollection may CROSSREF a book.
+% Required: author, title, booktitle, publisher, year
+% Optional: editor, volume or number, series, type, chapter, pages,
+% address, edition, month, note
+% Also optional: library, isbn, issn, annote
+
+FUNCTION {incollection}
+{ output.bibitem
+ library.output
+ new.sentence
+ format.authors "author" output.check
+ new.block
+ format.title "title" output.check
+ new.block
+ crossref missing$
+ { format.in.ed.booktitle "booktitle" output.check
+ format.bvolume output
+ format.number.series output
+ format.chapter.pages output
+ new.sentence
+ publisher "publisher" output.check
+ address output
+ format.edition output
+ format.date "year" output.check
+ }
+ { format.incoll.inproc.crossref output.nonnull
+ format.chapter.pages output
+ }
+ if$
+ isbn.issn.output
+ new.block
+ note.output
+ annote.output
+ fin.entry
+}
+
+% An inproceedings is an article in a conference proceedings, and it may
+% CROSSREF a proceedings. If there's no address field, the month (& year)
+% will appear just before note.
+% Required: author, title, booktitle, year
+% Optional: editor, volume or number, series, pages, address, month,
+% organization, publisher, note
+% Also optional: library, isbn, issn, annote
+
+FUNCTION {inproceedings}
+{ output.bibitem
+ library.output
+ new.sentence
+ format.authors "author" output.check
+ new.block
+ format.title "title" output.check
+ new.block
+ crossref missing$
+ { format.in.ed.booktitle "booktitle" output.check
+ format.bvolume output
+ format.number.series output
+ format.pages output
+ address empty$
+ { organization publisher new.sentence.checkb
+ organization output
+ publisher output
+ format.date "year" output.check
+ }
+ { address output.nonnull
+ format.date "year" output.check
+ new.sentence
+ organization output
+ publisher output
+ }
+ if$
+ }
+ { format.incoll.inproc.crossref output.nonnull
+ format.pages output
+ }
+ if$
+ isbn.issn.output
+ new.block
+ note.output
+ annote.output
+ fin.entry
+}
+
+% The conference function is included for Scribe compatibility.
+
+FUNCTION {conference} { inproceedings }
+
+% A manual is technical documentation.
+% Required: title
+% Optional: author, organization, address, edition, month, year, note
+% Also optional: library, isbn, issn, annote
+
+FUNCTION {manual}
+{ output.bibitem
+ library.output
+ new.sentence
+ author empty$
+ { organization empty$
+ 'skip$
+ { organization output.nonnull
+ address output
+ }
+ if$
+ }
+ { format.authors output.nonnull }
+ if$
+ new.block
+ format.btitle "title" output.check
+ author empty$
+ { organization empty$
+ { address new.block.checka
+ address output
+ }
+ 'skip$
+ if$
+ }
+ { organization address new.block.checkb
+ organization output
+ address output
+ }
+ if$
+ format.edition output
+ format.date output
+ isbn.issn.output
+ new.block
+ note.output
+ annote.output
+ fin.entry
+}
+
+% A mastersthesis is a Master's thesis.
+% Required: author, title, school, year
+% Optional: type, address, month, note
+% Also optional: library, isbn, issn, annote
+
+FUNCTION {mastersthesis}
+{ output.bibitem
+ library.output
+ new.sentence
+ format.authors "author" output.check
+ new.block
+ format.title "title" output.check
+ new.block
+ "Master's thesis" format.thesis.type output.nonnull
+ school "school" output.check
+ address output
+ format.date "year" output.check
+ isbn.issn.output
+ new.block
+ note.output
+ annote.output
+ fin.entry
+}
+
+% A misc is something that doesn't fit elsewhere.
+% Required: at least one of the `optional' fields
+% Optional: author, title, howpublished, month, year, note
+% Also optional: library, isbn, issn, annote
+
+FUNCTION {misc}
+{ output.bibitem
+ library.output
+ new.sentence
+ format.authors output
+ title howpublished new.block.checkb
+ format.title output
+ howpublished new.block.checka
+ howpublished output
+ format.date output
+ isbn.issn.output
+ new.block
+ note.output
+ annote.output
+ fin.entry
+ empty.misc.check
+}
+
+% A phdthesis is like a mastersthesis.
+% Required: author, title, school, year
+% Optional: type, address, month, note
+% Also optional: library, isbn, issn, annote
+
+FUNCTION {phdthesis}
+{ output.bibitem
+ library.output
+ new.sentence
+ format.authors "author" output.check
+ new.block
+ format.btitle "title" output.check
+ new.block
+ "PhD thesis" format.thesis.type output.nonnull
+ school "school" output.check
+ address output
+ format.date "year" output.check
+ isbn.issn.output
+ new.block
+ note.output
+ annote.output
+ fin.entry
+}
+
+% A proceedings is a conference proceedings.
+% If there is an organization but no editor field, the organization will
+% appear as the first optional field (we try to make the first block nonempty);
+% if there's no address field, the month (& year) will appear just before note.
+% Required: title, year
+% Optional: editor, volume or number, series, address, month,
+% organization, publisher, note
+% Also optional: library, isbn, issn, annote
+
+FUNCTION {proceedings}
+{ output.bibitem
+ library.output
+ new.sentence
+ editor empty$
+ { organization output }
+ { format.editors output.nonnull }
+ if$
+ new.block
+ format.btitle "title" output.check
+ format.bvolume output
+ format.number.series output
+ address empty$
+ { editor empty$
+ { publisher new.sentence.checka }
+ { organization publisher new.sentence.checkb
+ organization output
+ }
+ if$
+ publisher output
+ format.date "year" output.check
+ }
+ { address output.nonnull
+ format.date "year" output.check
+ new.sentence
+ editor empty$
+ 'skip$
+ { organization output }
+ if$
+ publisher output
+ }
+ if$
+ isbn.issn.output
+ new.block
+ note.output
+ annote.output
+ fin.entry
+}
+
+% A techreport is a technical report.
+% Required: author, title, institution, year
+% Optional: type, number, address, month, note
+% Also optional: library, isbn, issn, annote
+
+FUNCTION {techreport}
+{ output.bibitem
+ library.output
+ new.sentence
+ format.authors "author" output.check
+ new.block
+ format.title "title" output.check
+ new.block
+ format.tr.number output.nonnull
+ institution "institution" output.check
+ address output
+ format.date "year" output.check
+ isbn.issn.output
+ new.block
+ note.output
+ annote.output
+ fin.entry
+}
+
+% An unpublished is something that hasn't been published.
+% Required: author, title, note
+% Optional: month, year
+% Also optional: library, annote
+
+FUNCTION {unpublished}
+{ output.bibitem
+ library.output
+ new.sentence
+ format.authors "author" output.check
+ new.block
+ format.title "title" output.check
+ new.block
+ note "note" output.check
+ format.date output
+ annote.output
+ fin.entry
+}
+
+% We use entry type `misc' for an unknown type; BibTeX gives a warning.
+
+FUNCTION {default.type} { misc }
+
+% Here are macros for common things that may vary from style to style.
+% Users are encouraged to use these macros.
+%
+% Months are either written out in full or abbreviated
+
+
+
+MACRO {jan} {"January"}
+
+MACRO {feb} {"February"}
+
+MACRO {mar} {"March"}
+
+MACRO {apr} {"April"}
+
+MACRO {may} {"May"}
+
+MACRO {jun} {"June"}
+
+MACRO {jul} {"July"}
+
+MACRO {aug} {"August"}
+
+MACRO {sep} {"September"}
+
+MACRO {oct} {"October"}
+
+MACRO {nov} {"November"}
+
+MACRO {dec} {"December"}
+
+
+
+% Journals are either written out in full or abbreviated;
+% the abbreviations are like those found in ACM publications.
+%
+% To get a completely different set of abbreviations, it may be best to make
+% a separate .bib file with nothing but those abbreviations; users could then
+% include that file name as the first argument to the \bibliography command
+
+
+
+MACRO {acmcs} {"ACM Computing Surveys"}
+
+MACRO {acta} {"Acta Informatica"}
+
+MACRO {cacm} {"Communications of the ACM"}
+
+MACRO {ibmjrd} {"IBM Journal of Research and Development"}
+
+MACRO {ibmsj} {"IBM Systems Journal"}
+
+MACRO {ieeese} {"IEEE Transactions on Software Engineering"}
+
+MACRO {ieeetc} {"IEEE Transactions on Computers"}
+
+MACRO {ieeetcad}
+ {"IEEE Transactions on Computer-Aided Design of Integrated Circuits"}
+
+MACRO {ipl} {"Information Processing Letters"}
+
+MACRO {jacm} {"Journal of the ACM"}
+
+MACRO {jcss} {"Journal of Computer and System Sciences"}
+
+MACRO {scp} {"Science of Computer Programming"}
+
+MACRO {sicomp} {"SIAM Journal on Computing"}
+
+MACRO {tocs} {"ACM Transactions on Computer Systems"}
+
+MACRO {tods} {"ACM Transactions on Database Systems"}
+
+MACRO {tog} {"ACM Transactions on Graphics"}
+
+MACRO {toms} {"ACM Transactions on Mathematical Software"}
+
+MACRO {toois} {"ACM Transactions on Office Information Systems"}
+
+MACRO {toplas} {"ACM Transactions on Programming Languages and Systems"}
+
+MACRO {tcs} {"Theoretical Computer Science"}
+
+
+
+% Now we read in the .BIB entries.
+
+READ
+
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%% The following part tries to establish whether fields in entries which
+%% crossreference another entry are inherited from that entry or not.
+%% Unfortunately BibTeX does not make that information available.
+%% The basic assumption is that if the fields are identical, they are
+%% assumed to be inherited.
+%% By Volker Kuhlmann <v.kuhlmann@elec.canterbury.ac.nz>
+%% with help from Oren Patashnik.
+%% 15, 16, 17 March 2000
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+% Display some debugging output (sort output on column 2 and check)
+INTEGERS { debug.inheritance }
+FUNCTION {debug.inheritance.disable} { #0 'debug.inheritance := }
+FUNCTION {debug.inheritance.enable} { #1 'debug.inheritance := }
+EXECUTE {debug.inheritance.disable}% do not uncomment this!
+%% uncomment if desired:
+%EXECUTE {debug.inheritance.enable}
+
+% We need a global string variable to hold field values between entries.
+% One per field checked for inheritance, plus cite.
+% Really, we should also save a flag "missing" for each field, but we
+% won't bother for now.
+STRINGS {
+ inh.cite
+ inh.note
+ inh.annote
+ inh.isbn
+ inh.issn
+ inh.library
+ inh.volume
+ inh.month
+ inh.totalpages
+ inh.url
+}
+
+% Adds leading "0" to integers to fill up a field width. Was there a printf$ ...
+% pop: integer; push: string
+FUNCTION {fillint3.to.str}% (field width = 3)
+{
+ duplicate$ #100 <
+ {
+ duplicate$ #10 <
+ { "00" }
+ { "0" }
+ if$
+ }
+ { "" }
+ if$
+ swap$ int.to.str$ *
+}
+% Field width = 5, i.e. works up to 99 999 (= 10^6 - 1)
+FUNCTION {fillint.to.str}
+{
+ duplicate$ #10000 <
+ { duplicate$ #1000 <
+ { duplicate$ #100 <
+ { duplicate$ #10 <
+ { "0000" }
+ { "000" }
+ if$
+ }
+ { "00" }
+ if$
+ }
+ { "0" }
+ if$
+ }
+ { "" }
+ if$
+ swap$ int.to.str$ *
+}
+
+FUNCTION {zero.inherited}
+{
+ #0 'inherited.note :=
+ #0 'inherited.annote :=
+ #0 'inherited.isbn :=
+ #0 'inherited.issn :=
+ #0 'inherited.library :=
+ #0 'inherited.volume :=
+ #0 'inherited.month :=
+ #0 'inherited.totalpages :=
+ #0 'inherited.url :=
+}
+
+FUNCTION {debug.entry.dump.head}
+{ debug.inheritance
+ { "*** Dumping data base entries ... ***" top$ }
+ 'skip$
+ if$
+}
+
+% This is for debugging. Dumps an entry with its cardinal number.
+FUNCTION {debug.entry.dump}
+{ debug.inheritance
+ { "entry " num.entry fillint.to.str * " > " * cite$ * top$ }
+ 'skip$
+ if$
+}
+
+% First, we number all entries through.
+% Later in the process of establishing field inheritance, we need to sort
+% all entries. Saving a cardinal entry number allows us to restore the
+% original order.
+% While we're at it, we also initialise the flags variables.
+
+INTEGERS { i }
+
+FUNCTION {number.entries.init}
+{ #1 'i :=
+}
+
+FUNCTION {number.entries}
+{
+ i 'num.entry :=
+ i #1 + 'i :=
+ %zero.inherited
+}
+
+EXECUTE {number.entries.init}
+ITERATE {number.entries}
+
+EXECUTE {debug.entry.dump.head} ITERATE {debug.entry.dump} %% debug
+
+% Sort all entries such that the crossreferenced entry is first, then all
+% entries crossreferencing it are immediately following.
+% Entries which neither crossreference nor are crossreferenced are somewhere
+% in between.
+
+%{ crossref #127 int.to.chr$ * } % the DEL character is ignored by SORT
+% tilde is the highest character we get; it's also illegal in cite keys
+FUNCTION {generate.crossref.sortkeys}
+{
+ crossref missing$
+ { cite$ }
+ { crossref "~" * }
+ if$
+ 'sort.key$ :=
+ %% debug:
+ %"entry " num.entry fillint.to.str * " sort key: '" * sort.key$ * "'" * top$
+}
+
+ITERATE {generate.crossref.sortkeys}
+SORT
+
+%EXECUTE {debug.entry.dump.head} ITERATE {debug.entry.dump} %% debug
+
+% Now go through and check for equal fields in consecutive entries.
+% For each no-crossref entry: save fields
+% For each crossref entry: any fields equal to a saved one is assumed
+% to be inherited.
+
+% Print current values of inherited.* . For debugging.
+FUNCTION {debug.inheritance.dump}
+{ debug.inheritance
+ {
+ "entry " num.entry fillint.to.str * " inh:" *
+ " note " inherited.note int.to.str$ * *
+ ", annote " inherited.annote int.to.str$ * *
+ ", isbn " inherited.isbn int.to.str$ * *
+ ", issn " inherited.issn int.to.str$ * *
+ ", lib " inherited.library int.to.str$ * *
+ ", vol " inherited.volume int.to.str$ * *
+ ", mon " inherited.month int.to.str$ * *
+ ", tp " inherited.totalpages int.to.str$ * *
+ ", url " inherited.url int.to.str$ * *
+ top$
+ }
+ 'skip$
+ if$
+}
+
+% save possibly inherited fields in global variables
+% It is an error to save a missing field in a string variable, so we save
+% an empty string instead.
+FUNCTION {inheritance.save.fields}
+{
+ zero.inherited % this entry has no crossref - therefore no inherited fields
+ cite$ 'inh.cite :=
+ note missing$
+ { "" } { note } if$
+ 'inh.note :=
+ annote missing$
+ { "" } { annote } if$
+ 'inh.annote :=
+ isbn missing$
+ { "" } { isbn } if$
+ 'inh.isbn :=
+ issn missing$
+ { "" } { issn } if$
+ 'inh.issn :=
+ library missing$
+ { "" } { library } if$
+ 'inh.library :=
+ volume missing$
+ { "" } { volume } if$
+ 'inh.volume :=
+ month missing$
+ { "" } { month } if$
+ 'inh.month :=
+ totalpages missing$
+ { "" } { totalpages } if$
+ 'inh.totalpages :=
+ url missing$
+ { "" } { url } if$
+ 'inh.url :=
+}
+
+% Check for each non-missing field whether it is equal to the saved one.
+% Because we don't have any "field missing" information from the
+% crossreferenced entry, a field which is given in the corssreferencing
+% entry but is empty will be incorrectly detected as inherited if it is
+% missing in the crossreferenced entry.
+% Currently empty fields are not printed anyway, so we don't need to worry.
+FUNCTION {check.inheritance.fields}
+{
+ note missing$
+ { #0 } { note inh.note = } if$
+ 'inherited.note :=
+ annote missing$
+ { #0 } { annote inh.annote = } if$
+ 'inherited.annote :=
+ isbn missing$
+ { #0 } { isbn inh.isbn = } if$
+ 'inherited.isbn :=
+ issn missing$
+ { #0 } { issn inh.issn = } if$
+ 'inherited.issn :=
+ library missing$
+ { #0 } { library inh.library = } if$
+ 'inherited.library :=
+ volume missing$
+ { #0 } { volume inh.volume = } if$
+ 'inherited.volume :=
+ month missing$
+ { #0 } { month inh.month = } if$
+ 'inherited.month :=
+ totalpages missing$
+ { #0 } { totalpages inh.totalpages = } if$
+ 'inherited.totalpages :=
+ url missing$
+ { #0 } { url inh.url = } if$
+ 'inherited.url :=
+}
+
+INTEGERS { check.inh.inited }
+
+FUNCTION {check.inheritance.init}
+{ #0 'check.inh.inited :=
+}
+
+FUNCTION {check.inheritance}
+{ check.inh.inited #0 =
+ { #1 'check.inh.inited :=
+ inheritance.save.fields
+ }
+ { crossref missing$
+ { inheritance.save.fields }
+ { crossref inh.cite =
+ { check.inheritance.fields }
+ { zero.inherited
+ "crossreferencing entry {" cite$ * "} out of order" *
+ " ****** contact listbib author ******" * warning$ }
+ if$
+ }
+ if$
+ }
+ if$
+ %debug.inheritance.dump %% debug
+}
+
+EXECUTE {check.inheritance.init}
+ITERATE {check.inheritance}
+
+% Finally, restore original entry order
+
+FUNCTION {generate.num.entry.sortkeys}
+{
+ num.entry fillint.to.str 'sort.key$ :=
+}
+
+ITERATE {generate.num.entry.sortkeys}
+SORT
+
+%EXECUTE {debug.entry.dump.head} ITERATE {debug.entry.dump} %% debug
+ITERATE {debug.inheritance.dump} %% debug
+
+%% End of part checking for inherited fields.
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+
+% The sortify function converts to lower case after purify$ing; it's
+% used in sorting and in computing alphabetic labels after sorting
+%
+% The chop.word(w,len,s) function returns either s or, if the first len
+% letters of s equals w (this comparison is done in the third line of the
+% function's definition), it returns that part of s after w.
+
+
+
+
+
+% This long comment applies only to alphabetic labels
+%
+% The format.lab.names function makes a short label by using the initials of
+% the von and Last parts of the names (but if there are more than four names,
+% (i.e., people) it truncates after three and adds a superscripted "+";
+% it also adds such a "+" if the last of multiple authors is "others").
+% If there is only one name, and its von and Last parts combined have just
+% a single name-token ("Knuth" has a single token, "Brinch Hansen" has two),
+% we take the first three letters of the last name. The boolean
+% et.al.char.used tells whether we've used a superscripted "+", so that we
+% know whether to include a LaTeX macro for it.
+%
+% format.lab.names(s) ==
+% BEGIN
+% numnames := num.names$(s)
+% if numnames > 1 then
+% if numnames > 4 then
+% namesleft := 3
+% else
+% namesleft := numnames
+% nameptr := 1
+% nameresult := ""
+% while namesleft > 0
+% do
+% if (name_ptr = numnames) and
+% format.name$(s, nameptr, "{ff }{vv }{ll}{ jj}") = "others"
+% then nameresult := nameresult * "{\etalchar{+}}"
+% et.al.char.used := true
+% else nameresult := nameresult *
+% format.name$(s, nameptr, "{v{}}{l{}}")
+% nameptr := nameptr + 1
+% namesleft := namesleft - 1
+% od
+% if numnames > 4 then
+% nameresult := nameresult * "{\etalchar{+}}"
+% et.al.char.used := true
+% else
+% t := format.name$(s, 1, "{v{}}{l{}}")
+% if text.length$(t) < 2 then % there's just one name-token
+% nameresult := text.prefix$(format.name$(s,1,"{ll}"),3)
+% else
+% nameresult := t
+% fi
+% fi
+% return nameresult
+% END
+%
+% Exactly what fields we look at in constructing the primary part of the label
+% depends on the entry type; this selectivity (as opposed to, say, always
+% looking at author, then editor, then key) helps ensure that "ignored" fields,
+% as described in the LaTeX book, really are ignored. Note that MISC is part
+% of the deepest `else' clause in the nested part of calc.label; thus, any
+% unrecognized entry type in the database is handled correctly.
+%
+% There is one auxiliary function for each of the four different sequences of
+% fields we use. The first of these functions looks at the author field, and
+% then, if necessary, the key field. The other three functions, which might
+% look at two fields and the key field, are similar, except that the key field
+% takes precedence over the organization field (for labels---not for sorting).
+%
+% The calc.label function calculates the preliminary label of an entry, which
+% is formed by taking three letters of information from the author or editor or
+% key or organization field (depending on the entry type and on what's empty,
+% but ignoring a leading "The " in the organization), and appending the last
+% two characters (digits) of the year. It is an error if the appropriate fields
+% among author, editor, organization, and key are missing, and we use
+% the first three letters of the cite$ in desperation when this happens.
+% The resulting label has the year part, but not the name part, purify$ed
+% (purify$ing the year allows some sorting shenanigans by the user).
+%
+% This function also calculates the version of the label to be used in sorting.
+%
+% The final label may need a trailing 'a', 'b', etc., to distinguish it from
+% otherwise identical labels, but we can't calculated those "extra.label"s
+% until after sorting.
+%
+% calc.label ==
+% BEGIN
+% if type$ = "book" or "inbook" then
+% author.editor.key.label
+% else if type$ = "proceedings" then
+% editor.key.organization.label
+% else if type$ = "manual" then
+% author.key.organization.label
+% else
+% author.key.label
+% fi fi fi
+% label := label * substring$(purify$(field.or.null(year)), -1, 2)
+% % assuming we will also sort, we calculate a sort.label
+% sort.label := sortify(label), but use the last four, not two, digits
+% END
+
+
+
+% When sorting, we compute the sortkey by executing "presort" on each entry.
+% The presort key contains a number of "sortify"ed strings, concatenated
+% with multiple blanks between them. This makes things like "brinch per"
+% come before "brinch hansen per".
+%
+% The fields used here are: the sort.label for alphabetic labels (as set by
+% calc.label), followed by the author names (or editor names or organization
+% (with a leading "The " removed) or key field, depending on entry type and on
+% what's empty), followed by year, followed by the first bit of the title
+% (chopping off a leading "The ", "A ", or "An ").
+% Names are formatted: Von Last First Junior.
+% The names within a part will be separated by a single blank
+% (such as "brinch hansen"), two will separate the name parts themselves
+% (except the von and last), three will separate the names,
+% four will separate the names from year (and from label, if alphabetic),
+% and four will separate year from title.
+%
+% The sort.format.names function takes an argument that should be in
+% BibTeX name format, and returns a string containing " "-separated
+% names in the format described above. The function is almost the same
+% as format.names.
+
+
+
+% This long comment applies only to alphabetic labels, when sorted
+%
+% Now comes the final computation for alphabetic labels, putting in the 'a's
+% and 'b's and so forth if required. This involves two passes: a forward
+% pass to put in the 'b's, 'c's and so on, and a backwards pass
+% to put in the 'a's (we don't want to put in 'a's unless we know there
+% are 'b's).
+% We have to keep track of the longest (in width$ terms) label, for use
+% by the "thebibliography" environment.
+%
+% VAR: longest.label, last.sort.label, next.extra: string
+% longest.label.width, last.extra.num: integer
+%
+% initialize.longest.label ==
+% BEGIN
+% longest.label := ""
+% last.sort.label := int.to.chr$(0)
+% next.extra := ""
+% longest.label.width := 0
+% last.extra.num := 0
+% END
+%
+% forward.pass ==
+% BEGIN
+% if last.sort.label = sort.label then
+% last.extra.num := last.extra.num + 1
+% extra.label := int.to.chr$(last.extra.num)
+% else
+% last.extra.num := chr.to.int$("a")
+% extra.label := ""
+% last.sort.label := sort.label
+% fi
+% END
+%
+% reverse.pass ==
+% BEGIN
+% if next.extra = "b" then
+% extra.label := "a"
+% fi
+% label := label * extra.label
+% if width$(label) > longest.label.width then
+% longest.label := label
+% longest.label.width := width$(label)
+% fi
+% next.extra := extra.label
+% END
+
+
+
+% Now comes the computation for numeric labels.
+% We use either the sorted order or original order.
+% We still have to keep track of the longest (in width$ terms) label, for use
+% by the "thebibliography" environment.
+
+STRINGS { longest.label }
+
+INTEGERS { number.label longest.label.width }
+
+FUNCTION {initialize.longest.label}
+{ "" 'longest.label :=
+ #1 'number.label :=
+ #0 'longest.label.width :=
+}
+
+FUNCTION {longest.label.pass}
+{ number.label int.to.str$ 'label :=
+ number.label #1 + 'number.label :=
+ label width$ longest.label.width >
+ { label 'longest.label :=
+ label width$ 'longest.label.width :=
+ }
+ 'skip$
+ if$
+}
+
+EXECUTE {initialize.longest.label}
+
+ITERATE {longest.label.pass}
+
+
+
+% Now we're ready to start writing the .BBL file.
+% We begin, if necessary, with a LaTeX macro for unnamed names in an alphabetic
+% label; next comes stuff from the `preamble' command in the database files.
+% Then we give an incantation containing the command
+% \begin{thebibliography}{...}
+% where the `...' is the longest label.
+%
+% We also call init.state.consts, for use by the output routines.
+
+FUNCTION {begin.bib}
+{ preamble$ empty$
+ 'skip$
+ { preamble$ write$ newline$ }
+ if$
+ "\begin{thebibliography}{" longest.label * "}" * write$ newline$
+ "\providecommand\url[1]{#1}" write$ newline$
+}
+
+EXECUTE {begin.bib}
+
+EXECUTE {init.state.consts}
+
+% Now we produce the output for all the entries
+
+ITERATE {call.type$}
+
+% Finally, we finish up by writing the `\end{thebibliography}' command.
+
+FUNCTION {end.bib}
+{ newline$
+ "\end{thebibliography}" write$ newline$
+}
+
+EXECUTE {end.bib}