summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/doc/latex/beaulivre/beaulivre-doc-en.tex
diff options
context:
space:
mode:
Diffstat (limited to 'Master/texmf-dist/doc/latex/beaulivre/beaulivre-doc-en.tex')
-rw-r--r--Master/texmf-dist/doc/latex/beaulivre/beaulivre-doc-en.tex434
1 files changed, 196 insertions, 238 deletions
diff --git a/Master/texmf-dist/doc/latex/beaulivre/beaulivre-doc-en.tex b/Master/texmf-dist/doc/latex/beaulivre/beaulivre-doc-en.tex
index f177a9e556f..a9d9a7870d8 100644
--- a/Master/texmf-dist/doc/latex/beaulivre/beaulivre-doc-en.tex
+++ b/Master/texmf-dist/doc/latex/beaulivre/beaulivre-doc-en.tex
@@ -1,12 +1,11 @@
-%! TEX program = xelatex
-\documentclass[English,French,allowbf,puretext]{beaulivre}
+\documentclass[English,Chinese,French,allowbf,puretext]{beaulivre}
\theoremstyle{basic}
\CreateTheorem{definition}<highest>
-\CreateTheorem{theorem}<highest>
-\CreateTheorem{conjecture}<highest>
+\CreateTheorem{theorem}[definition]
+\CreateTheorem{conjecture}[definition]
\CreateTheorem*{example*}
-\CreateTheorem{problem}<highest>
+\CreateTheorem{problem}[definition]
\theoremstyle{emphasis}
\CreateTheorem{remark}<highest>
@@ -19,9 +18,14 @@
\usepackage{ProjLib}
\usepackage{longtable} % breakable tables
\usepackage{hologo} % more TeX logo
+\usetikzlibrary{calc}
+
+\usepackage{blindtext}
+
+\UseLanguage{English}
%%================================
-%% For typestting code
+%% For typesetting code
%%================================
\usepackage{listings}
\definecolor{maintheme}{RGB}{70,130,180}
@@ -40,19 +44,27 @@
escapeinside={(*}{*)},
% numbers=left,
numberstyle=\scriptsize, stepnumber=1, numbersep=5pt,
- firstnumber=last,
-}
+ % firstnumber=last,
+}
\providecommand{\meta}[1]{$\langle${\normalfont\itshape#1}$\rangle$}
\lstset{moretexcs=%
- {subsubsection,href,color,NameTheorem,CreateTheorem,proofideanameEN,cref,dnf,needgraph,UseLanguage,UseOtherLanguage,AddLanguageSetting,maketitle,address,curraddr,email,keywords,subjclass,thanks,dedicatory,PLdate,ProjLib
+ {part,parttext,chapter,section,subsection,subsubsection,frontmatter,mainmatter,backmatter,tableofcontents,href,
+ color,NameTheorem,CreateTheorem,proofideanameEN,cref,dnf,needgraph,UseLanguage,UseOtherLanguage,AddLanguageSetting,maketitle,address,curraddr,email,keywords,subjclass,thanks,dedicatory,PLdate,ProjLib,qedhere
}
}
-\lstnewenvironment{code}%
-{\setkeys{lst}{columns=fullflexible,keepspaces=true}}{}
+\lstnewenvironment{code}%
+{\setstretch{1.07}%
+\setkeys{lst}{columns=fullflexible,keepspaces=true}%
+}{}
+\lstnewenvironment{code*}%
+{\setstretch{1.07}%
+\setkeys{lst}{numbers=left,columns=fullflexible,keepspaces=true}%
+}{}
%%================================
%% tip
%%================================
+\usepackage[many]{tcolorbox}
\newenvironment{tip}[1][Tip]{%
\begin{tcolorbox}[breakable,
enhanced,
@@ -73,27 +85,24 @@
%%================================
%% Names
%%================================
-\providecommand{\colorist}{{\normalfont\textsf{colorist}}}
-\providecommand{\colorart}{{\normalfont\textsf{colorart}}}
-\providecommand{\colorbook}{{\normalfont\textsf{colorbook}}}
-\providecommand{\lebhart}{{\normalfont\textsf{lebhart}}}
-\providecommand{\beaulivre}{{\normalfont\textsf{beaulivre}}}
+\providecommand{\colorist}{\textsf{colorist}}
+\providecommand{\colorart}{\textsf{colorart}}
+\providecommand{\colorbook}{\textsf{colorbook}}
+\providecommand{\lebhart}{\textsf{lebhart}}
+\providecommand{\beaulivre}{\textsf{beaulivre}}
-\usetikzlibrary{calc}
-
-\usepackage{blindtext}
+%%================================
+%% Titles
+%%================================
+\let\LevelOneTitle\chapter
+\let\LevelTwoTitle\section
+\let\LevelThreeTitle\subsection
%%================================
%% Main text
%%================================
\begin{document}
-% \title{\beaulivre{}, write your books in a colorful way}
-% \author{Jinwen XU}
-% \thanks{Corresponding to: \texttt{\beaulivre{} 2021/06/07}}
-% \date{June 2021, Beijing}
-
-% \maketitle
\frontmatter
@@ -102,28 +111,23 @@
\fill [cyan!90!black] ($(current page.south west)+(0,7)$) rectangle ($(current page.north west)+(25,-7)$);
\fill [yellow] (current page.south west) rectangle ($(current page.north west)+(3,0)$);
\node[text width=10cm] at ($(current page.north west)+(8.5,-6)$) {\huge\ProjLib};
- \node[text width=6cm,text height=3.5cm,scale=2.5] at ($(current page.north west)+(11,-10)$) {\textcolor{white}{\sffamily\beaulivre{}\\[5pt]\footnotesize\textsc{Write your books in \\a colorful way}\\[10pt]\tiny Corresponding to: \texttt{\beaulivre{} 2021/06/30}}};
+ \node[text width=6cm,text height=3.5cm,scale=2.5] at ($(current page.north west)+(11,-10)$) {\textcolor{white}{\sffamily\beaulivre{}\\[5pt]\footnotesize\textsc{Write your books in \\a colorful way}\\[10pt]\tiny Corresponding to: \texttt{\beaulivre{} 2021/07/15}}};
\node at ($(current page.south)+(1.5,3)$) {\fontsize{16pt}{0pt}\selectfont\textcolor{gray}{\scshape Jinwen XU}};
- \node at ($(current page.south)+(1.5,2)$) {\fontsize{12pt}{0pt}\selectfont\textcolor{gray}{June 2021, Beijing}};
+ \node at ($(current page.south)+(1.5,2)$) {\fontsize{12pt}{0pt}\selectfont\textcolor{gray}{July 2021, Beijing}};
\end{tikzpicture}%
\end{titlepage}%
\cleardoublepage%
-\frontmatter
+
\chapter*{Preface}
\beaulivre{} is a member of the \colorist{} class series. Its name is taken from French words ``beau'' (for ``beautiful'') and ``livre'' (for ``book''). The entire collection includes \colorart{} and \lebhart{} for typesetting articles and \colorbook{} and \beaulivre{} for typesetting books. My original intention in designing this series was to write drafts and notes that look colorful yet not dazzling.
-\beaulivre{} has multi-language support, including Chinese (simplified and traditional), English, French, German, Italian, Japanese, Portuguese (European and Brazilian), Russian and Spanish. These languages can be switched seamlessly in a single document. Due to the usage of custom fonts, \beaulivre{} requires \hologo{XeLaTeX} or \hologo{LuaLaTeX} to compile.
+\beaulivre{} has multi-language support, including Chinese (simplified and traditional), English, French, German, Italian, Japanese, Portuguese (European and Brazilian), Russian and Spanish. These languages can be switched seamlessly in a single document. Due to the usage of custom fonts, \lebhart{} requires \hologo{XeLaTeX} or \hologo{LuaLaTeX} to compile.
This documentation is typeset using \beaulivre{} (with the option \texttt{allowbf}). You can think of it as a short introduction and demonstration.
\bigskip
-\begin{tcolorbox}[enhanced jigsaw,pad at break*=1mm,breakable,colback=yellow!25!paper,boxrule=0pt,frame hidden]
- Since the main body of \colorist{} is modified from the \textsf{minimalist} series, some elements have not been completely redesigned yet, especially the TOC, part and chapter style. These will be added gradually in the future versions.
-\end{tcolorbox}
-
-\bigskip
\begin{tip}
Multi-language support, theorem-like environments, draft marks and some other features are provided by the \ProjLib{} toolkit. Here we only briefly discuss how to use it with this document class. For more detailed information, you can refer to the documentation of \ProjLib{}.
\end{tip}
@@ -132,11 +136,25 @@ This documentation is typeset using \beaulivre{} (with the option \texttt{allowb
\mainmatter
-\chapter{Initialization}
+\part{Instruction}
+\parttext{You can add some introductory text here via \lstinline|\\parttext|\meta{text}.}
+
+\medskip
+\LevelOneTitle*{Before you start}
+\addcontentsline{toc}{chapter}{Before you start}
+In order to use the package or classes described here, you need to:
+\begin{itemize}
+ \item install TeX Live or MikTeX of the latest possible version, and make sure that \texttt{colorist} and \texttt{projlib} are correctly installed in your \TeX{} system.
+ \item be familiar with the basic usage of \LaTeX{}, and knows how to compile your document with \hologo{pdfLaTeX}, \hologo{XeLaTeX} or \hologo{LuaLaTeX}.
+\end{itemize}
+
+
+\LevelOneTitle{Usage and examples}
-\section{How to load it}
+\LevelTwoTitle{How to load it}
One only needs to put
+
\begin{code}
\documentclass{beaulivre}
\end{code}
@@ -146,40 +164,144 @@ as the first line to use the \beaulivre{} class.
You need to use either \hologo{XeLaTeX} or \hologo{LuaLaTeX} engine to compile.
\end{tip}
-\section{Options}
+\LevelTwoTitle{Example - A complete document}
+
+Let's first look at a complete document.
+
+
+\begin{code*}
+\documentclass{colorbook}
+\usepackage{ProjLib}
+
+\UseLanguage{French}
+
+\begin{document}
+
+\frontmatter
+
+\begin{titlepage}
+ (*\meta{code for titlepage}*)
+\end{titlepage}
+
+\tableofcontents
+
+\mainmatter
+
+\part{(*\meta{part title}*)}
+\parttext{(*\meta{text after part title}*)}
-\beaulivre{} offers the following options:
+\chapter{(*\meta{chapter title}*)}
+
+\section{(*\meta{section title}*)}
+
+\dnf<Plus de contenu est nécessaire.>
+
+\begin{theorem}\label{thm:abc}
+ Ceci est un théorème.
+\end{theorem}
+Référence du théorème: \cref{thm:abc}
+
+\backmatter
+
+...
+
+\end{document}
+\end{code*}
+
+If you find this example a little complicated, don't worry. Let's now look at this example piece by piece.
+
+\LevelThreeTitle{Initialization}
+
+\medskip
+\begin{code}
+\documentclass{beaulivre}
+\usepackage{ProjLib}
+\end{code}
+
+Initialization is straightforward. The first line loads the document class \beaulivre{}, and the second line loads the \ProjLib{} toolkit to obtain some additional functionalities.
+
+\LevelThreeTitle{Set the language}
+
+\medskip
+\begin{code}
+\UseLanguage{French}
+\end{code}
+
+This line indicates that French will be used in the document (by the way, if only English appears in your article, then there is no need to set the language). You can also switch the language in the same way later in the middle of the text. Supported languages include Simplified Chinese, Traditional Chinese, Japanese, English, French, German, Spanish, Portuguese, Brazilian Portuguese and Russian%
+.%
+
+For detailed description of this command and more related commands, please refer to the section on the multi-language support.
+
+
+\LevelThreeTitle{Draft marks}
+
+\medskip
+\begin{code}
+\dnf<(*\meta{some hint}*)>
+\end{code}
+
+When you have some places that have not yet been finished yet, you can mark them with this command, which is especially useful during the draft stage.
+
+\LevelThreeTitle{Theorem-like environments}
+
+\medskip
+\begin{code}
+\begin{theorem}\label{thm:abc}
+ Ceci est un théorème.
+\end{theorem}
+Référence du théorème: \cref{thm:abc}
+\end{code}
+
+Commonly used theorem-like environments have been pre-defined. Also, when referencing a theorem-like environment, it is recommended to use \lstinline|\cref{|\meta{label}\texttt{\}} --- in this way, there is no need to explicitly write down the name of the corresponding environment every time.
+
+
+
+
+\LevelOneTitle{On the default fonts}
+By default, \lebhart{} uses Palatino Linotype as the English font, FounderType's YouSong and YouHei GBK as the Chinese fonts\footnote{For detail, pleaser visit FounderType's website: \url{https://www.foundertype.com}.}, and partially uses Neo Euler as the math font. Among them, Neo Euler can be downloaded at \url{https://github.com/khaledhosny/euler-otf}. The other fonts are not free, you need to purchase and install them on your own.
+
+\begin{itemize}
+ \item English main font. \textsf{English sans serif font}.
+ \item 中文主要字体, \textsf{中文无衬线字体}
+ \item Math demonstration: \( \alpha, \beta, \gamma, \delta, 1,2,3,4, a,b,c,d \), \[\mathrm{li}(x)\coloneqq \int_2^{\infty} \frac{1}{\log t}\,\mathrm{d}t \]
+\end{itemize}
+
+When the corresponding font is not installed, fonts that comes with TeX Live will be used instead. In this case, the experience might be reduced.
+
+\LevelOneTitle{The options}
+
+\beaulivre{} offers the following options:
\begin{itemize}
\item The language options \texttt{EN} / \texttt{english} / \texttt{English}, \texttt{FR} / \texttt{french} / \texttt{French}, etc.
\begin{itemize}
\item For the option names of a specific language, please refer to \meta{language name} in the next section. The first specified language will be used as the default language.
+ \item The language options are optional, mainly for increasing the compilation speed. Without them the result would be the same, only slower.
\end{itemize}
\item \texttt{draft} or \texttt{fast}
\begin{itemize}
\item The option \verb|fast| enables a faster but slightly rougher style, main differences are:
\begin{itemize}
- \item Use simpler math font configuration;
- \item Do not use \textsf{hyperref};
+ \item Use simpler math font configuration;
+ \item Do not use \textsf{hyperref};
\item Enable the fast mode of \ProjLib{} toolkit.
\end{itemize}
\end{itemize}
-\begin{tip}
- During the draft stage, it is recommended to use the \verb|fast| option to speed up compilation. When in \verb|fast| mode, there will be a watermark ``DRAFT'' to indicate that you are currently in the draft mode.
-\end{tip}
-\medskip
+ \begin{tip}
+ During the draft stage, it is recommended to use the \verb|fast| option to speed up compilation. When in \verb|fast| mode, there will be a watermark ``DRAFT'' to indicate that you are currently in the draft mode.
+ \end{tip}
\item \texttt{a4paper} or \texttt{b5paper}
\begin{itemize}
- \item Optional paper size. The default paper size is 8.5in $\times$ 11in.
+ \item Paper size options. The default paper size is 8.5in $\times$ 11in.
\end{itemize}
\item \texttt{palatino}, \texttt{times}, \texttt{garamond}, \texttt{biolinum} ~$|$~ \texttt{useosf}
\begin{itemize}
- \item Font options. As the name suggest, font with corresponding name will be loaded.
+ \item Font options. As the name suggest, font with corresponding name will be loaded.
\item The \texttt{useosf} option is used to enable the old-style figures.
\end{itemize}
\item \texttt{allowbf}
\begin{itemize}
- \item Allow boldface. When this option is enabled, the title, titles of all levels and names of theorem-like environments will be bolded.
+ \item Allow boldface. When this option is enabled, the main title, the titles of all levels and the names of theorem-like environments will be bolded.
\end{itemize}
\item \texttt{runin}
\begin{itemize}
@@ -198,28 +320,9 @@ as the first line to use the \beaulivre{} class.
\bigskip
In addition, the commonly used \texttt{oneside} and \texttt{twoside} options are also available. Two-page layout is used by default.
-\chapter{On the default fonts}
-By default, \beaulivre{} uses Palatino Linotype as the English font, FounderType's YouSong and YouHei GBK as the Chinese fonts, and partially uses Neo Euler as the math font. Among them, Neo Euler can be downloaded at \url{https://github.com/khaledhosny/euler-otf}. The other fonts are not free, you need to purchase and install them on your own. (For the Chinese fonts, visit FounderType's website for detail: \url{https://www.foundertype.com} ).
-
-\medskip
-\begin{tip}[Font demonstration]
- \begin{itemize}
- \item English main font. \textsf{English sans serif font}. \texttt{English typewriter font}.
- \item 中文主要字体,\textsf{中文无衬线字体}
- \item 数学示例: \( \alpha, \beta, \gamma, \delta, 1,2,3,4, a,b,c,d \), \[\mathrm{li}(x)\coloneqq \int_2^{\infty} \frac{1}{\log t}\,\mathrm{d}t \]
- \end{itemize}
-\end{tip}
-
-\bigskip
-When the corresponding font is not installed, fonts that comes with TeX Live will be used instead. In this case, the experience might be reduced.
+\LevelOneTitle{Instructions by topic}
-
-\chapter{Some instructions}
-
-% \vspace{-\baselineskip}
-Many of the features described next are provided by the \ProjLib{} toolkit. Only the basic usage is mentioned here. For more details, please refer to its user documentation.
-
-\section{Language configuration}
+\LevelTwoTitle{Language configuration}
\beaulivre{} has multi-language support, including Chinese (simplified and traditional), English, French, German, Italian, Japanese, Portuguese (European and Brazilian), Russian and Spanish. The language can be selected by the following macros:
@@ -257,15 +360,13 @@ In addition, you can also add new settings to selected language:
\end{itemize}
For example, \lstinline|\AddLanguageSetting(German){\color{orange}}| can make all German text displayed in orange (of course, one then need to add \lstinline|\AddLanguageSetting{\color{black}}| in order to correct the color of the text in other languages).
+\LevelTwoTitle{Theorems and how to reference them}
-\section{Theorems and how to reference them}
+Environments such as \texttt{definition} and \texttt{theorem} have been preset and can be used directly.
-Environments such as \texttt{definition} and \texttt{theorem} have been pre-defined and can be used directly.
-
-More specifically, preset environments include:
+More specifically, preset environments include:
\texttt{assumption}, \texttt{axiom}, \texttt{conjecture}, \texttt{convention}, \texttt{corollary}, \texttt{definition}, \texttt{definition-proposition}, \texttt{definition-theorem}, \texttt{example}, \texttt{exercise}, \texttt{fact}, \texttt{hypothesis}, \texttt{lemma}, \texttt{notation}, \texttt{observation}, \texttt{problem}, \texttt{property}, \texttt{proposition}, \texttt{question}, \texttt{remark}, \texttt{theorem}, and the corresponding unnumbered version with an asterisk \lstinline|*| in the name. The titles will change with the current language. For example, \texttt{theorem} will be displayed as ``Theorem" in English mode and ``Théorème" in French mode.
-\medskip
When referencing a theorem-like environment, it is recommended to use \lstinline|\cref{|\meta{label}\texttt{\}}. In this way, there is no need to explicitly write down the name of the corresponding environment every time.
\begin{tip}[Example]
@@ -275,7 +376,7 @@ When referencing a theorem-like environment, it is recommended to use \lstinline
will produce
\begin{definition}[Strange things]\label{def: strange}
- This is the definition of some strange objects.
+ This is the definition of some strange objects. There is approximately an one-line space before and after the theorem environment, and there will be a symbol to mark the end of the environment.
\end{definition}
\lstinline|\cref{def: strange}| will be displayed as: \cref{def: strange}.
@@ -290,7 +391,9 @@ After using \lstinline|\UseLanguage{French}|, a theorem will be displayed as:
By default, when referenced, the name of the theorem always matches the language of the context in which the theorem is located. For example, the definition above is still displayed in English in the current French mode: \cref{def: strange} and \cref{thm}. If you want the name of the theorem to match the current context when referencing, you can add \texttt{regionalref} to the global options.
\end{tip}
-\medskip
+\UseLanguage{English}
+
+\bigskip
The following are the main styles of theorem-like environments:
\begin{theorem}
Theorem style: theorem, proposition, lemma, corollary, ...
@@ -300,12 +403,10 @@ The following are the main styles of theorem-like environments:
Proof style
\end{proof}
-\vspace{-\baselineskip}
\begin{remark}
Remark style
\end{remark}
-\vspace{-.7\baselineskip}
\begin{conjecture}
Conjecture style
\end{conjecture}
@@ -328,10 +429,7 @@ For aesthetics, adjacent definitions will be connected together automatically:
Second definition.
\end{definition}
-\UseLanguage{English}
-
-\bigskip
-\section{Define a new theorem-like environment}
+\LevelTwoTitle{Define a new theorem-like environment}
If you need to define a new theorem-like environment, you must first define the name of the environment in the language to use:
\begin{itemize}
@@ -356,7 +454,7 @@ And then define this environment in one of following five ways:
\end{itemize}
\item \lstinline|\CreateTheorem{|\meta{name of environment}\lstinline|}<|\meta{numbered within}\lstinline|>|
\begin{itemize}
- \item Define a numbered environment \meta{name of environment}, numbered within the \\counter \meta{numbered within}
+ \item Define a numbered environment \meta{name of environment}, numbered within the counter \meta{numbered within}
\end{itemize}
\item \lstinline|\CreateTheorem{|\meta{name of environment}\lstinline|}(|\meta{existed environment}\lstinline|)|\\
\lstinline|\CreateTheorem*{|\meta{name of environment}\lstinline|}(|\meta{existed environment}\lstinline|)|
@@ -364,8 +462,8 @@ And then define this environment in one of following five ways:
\item Identify \meta{name of environment} with \meta{existed environment} or \meta{existed environment}\lstinline|*|.
\item This method is usually useful in the following two situations:
\begin{enumerate}
- \item To use a more concise name. For example, with \lstinline|\CreateTheorem{thm}|\\\lstinline|(theorem)|, one can then use the name \texttt{thm} to write theorem.
- \item To remove the numbering. For example, one can remove the numbering of the \texttt{remark} environment with \lstinline|\CreateTheorem{remark}(remark*)|.
+ \item To use a more concise name. For example, with \lstinline|\CreateTheorem{thm}(theorem)|, one can then use the name \texttt{thm} to write theorem.
+ \item To remove the numbering of some environments. For example, one can remove the numbering of the \texttt{remark} environment with \lstinline|\CreateTheorem{remark}(remark*)|.
\end{enumerate}
\end{itemize}
\end{itemize}
@@ -374,198 +472,58 @@ And then define this environment in one of following five ways:
This macro utilizes the feature of \textsf{amsthm} internally, so the traditional \texttt{theoremstyle} is also applicable to it. One only needs declare the style before the relevant definitions.
\end{tip}
-% \def\proofideanameEN{Idea}
\NameTheorem[EN]{proofidea}{Idea}
\CreateTheorem*{proofidea*}
\CreateTheorem{proofidea}<section>
\bigskip
Here is an example. The following code:
+
\begin{code}
\NameTheorem[EN]{proofidea}{Idea}
\CreateTheorem*{proofidea*}
\CreateTheorem{proofidea}<section>
\end{code}
-defines an unnumbered environment \lstinline|proofidea*| and a numbered environment \lstinline|proofidea| (numbered within section) respectively. They can be used in English context. The effect is as follows:
+defines an unnumbered environment \lstinline|proofidea*| and a numbered environment \lstinline|proofidea| (numbered within section) respectively. They can be used in English context.
+The effect is as follows:
+\vspace{-0.3\baselineskip}
\begin{proofidea*}
The \lstinline|proofidea*| environment.
\end{proofidea*}
+\vspace{-\baselineskip}
\begin{proofidea}
The \lstinline|proofidea| environment.
\end{proofidea}
\clearpage
-\section{Draft mark}
+\LevelTwoTitle{Draft mark}
You can use \lstinline|\dnf| to mark the unfinished part. For example:
\begin{itemize}
\item \lstinline|\dnf| or \lstinline|\dnf<...>|. The effect is: \dnf~ or \dnf<...>. \\The prompt text changes according to the current language. For example, it will be displayed as \UseOtherLanguage{French}{\dnf} in French mode.
\end{itemize}
-Similarly, there is \lstinline|\needgraph| :
+Similarly, there is \lstinline|\needgraph| :
\begin{itemize}
\item \lstinline|\needgraph| or \lstinline|\needgraph<...>|. The effect is: \needgraph or \needgraph<...>The prompt text changes according to the current language. For example, in French mode, it will be displayed as \UseOtherLanguage{French}{\needgraph}
\end{itemize}
-% \vspace{-.5\baselineskip}
-% \section{On the title, abstract and keywords}
-
-% \beaulivre{} has both the features of standard classes and that of the \AmS{} classes.
-
-% Therefore, the title part can either be written in the usual way, in accordance with the standard class \textsf{article}:
-
-% \begin{code}
-% \title{(*\meta{title}*)}
-% \author{(*\meta{author}*)}
-% \date{(*\meta{date}*)}
-% \maketitle
-% \begin{abstract}
-% (*\meta{abstract}*)
-% \end{abstract}
-% \begin{keyword}
-% (*\meta{keywords}*)
-% \end{keyword}
-% \end{code}
-
-% \vspace{-.5\baselineskip}
-% or written in the way of \AmS{} classes:
-
-% \begin{code}
-% \title{(*\meta{title}*)}
-% \author{(*\meta{author}*)}
-% \address{(*\meta{address}*)}
-% \email{(*\meta{email}*)}
-% \date{(*\meta{date}*)}
-% \keywords{(*\meta{keywords}*)}
-% \subjclass{(*\meta{subjclass}*)}
-% \begin{abstract}
-% (*\meta{abstract}*)
-% \end{abstract}
-% \maketitle
-% \end{code}
-
-% \medskip
-% The author information can contain multiple groups, written as:
-
-% \begin{code}
-% \author{(*\meta{author 1}*)}
-% \address{(*\meta{address 1}*)}
-% \email{(*\meta{email 1}*)}
-% \author{(*\meta{author 2}*)}
-% \address{(*\meta{address 2}*)}
-% \email{(*\meta{email 2}*)}
-% ...
-% \end{code}
-
-% Among them, the mutual order of \lstinline|\address|, \lstinline|\curraddr|, \lstinline|\email| is not important.
-
-
-\section{Known issues}
+
+\LevelOneTitle{Known issues}
\begin{itemize}[itemsep=.6em]
\item The font settings are still not perfect.
- \item Since many features are based on the \ProjLib{} toolkit, \beaulivre{} inherits all its problems. For details, please refer to the "Known Issues" section of the \ProjLib{} documentation.
+ \item Since many features are based on the \ProjLib{} toolkit, \colorist{} (and hence \colorart{}, \lebhart{} and \colorbook{}, \beaulivre{}) inherits all its problems. For details, please refer to the ``Known Issues'' section of the \ProjLib{} documentation.
\item The error handling mechanism is incomplete: there is no corresponding error prompt when some problems occur.
\item There are still many things that can be optimized in the code.
\end{itemize}
-
-\chapter{Document templates}
-
-% \vspace*{-1.5\baselineskip}
-
-\section{The standard way}
-
-If you want to write in the standard way, you can refer to the following example:
-
-\begin{code}
-\documentclass{beaulivre}
-\usepackage{ProjLib} % Load ProjLib toolkit
-
-\UseLanguage{French} % Use French from here
-
-\begin{document}
-
-\title{Le Titre}
-\author{Auteur}
-\date{\PLdate{2022-04-01}}
-
-\maketitle
-
-\chapter{Un théorème}
-
-%% Theorem-like environments can be used directly
-\begin{theorem}\label{thm:abc}
- Ceci est un théorème.
-\end{theorem}
-
-Référence du théorème: \cref{thm:abc}
- % It is recommended to use clever reference
-
-\end{document}
-\end{code}
-
-If you wish to switch to the standard class later, just replace the first two lines with:
-
-\begin{code}
-\documentclass{article}
-\usepackage[a4paper,margin=1in]{geometry}
-\usepackage[hidelinks]{hyperref}
-\usepackage[palatino]{ProjLib} % Load ProjLib toolkit
-\end{code}
-
-
-\clearpage
-\section{The \texorpdfstring{\AmS{}}{AMS} way}
-
-If you intend to switch to the journal template in the future and thus want to use the writing style as in the \AmS{} classes, you can refer to the following example:
-
-\begin{code}
-\documentclass{beaulivre}
-\usepackage{ProjLib} % Load ProjLib toolkit
-
-\UseLanguage{French} % Use French from here
-
-\begin{document}
-
-\title{Le Titre}
-\author{Auteur 1}
-\address{Adresse 1}
-\email{\href{Courriel 1}{Courriel 1}}
-\author{Auteur 1}
-\address{Adresse 1}
-\email{\href{Courriel 2}{Courriel 2}}
-\date{\PLdate{2022-04-01}}
-\subjclass{*****}
-\keywords{...}
-
-\maketitle
-
-\chapter{Première section}
-
-%% Theorem-like environments can be used directly
-\begin{theorem}\label{thm:abc}
- Ceci est un théorème.
-\end{theorem}
-
-Référence du théorème: \cref{thm:abc}
- % It is recommended to use clever reference
-
-\end{document}
-\end{code}
-
-\vspace{-0.3\baselineskip}
-In this way, if you wish to switch to \AmS{} class later, just replace the first two lines with:
-
-\begin{code}
-\documentclass{amsart}
-\usepackage[a4paper,margin=1in]{geometry}
-\usepackage[hidelinks]{hyperref}
-\usepackage[palatino]{ProjLib} % Load ProjLib toolkit
-\end{code}
-
+\part{Demonstration}
\blinddocument
\end{document}
+\endinput
+%%
+%% End of file `beaulivre/beaulivre-doc-en.tex'.