summaryrefslogtreecommitdiff
path: root/Master/bin/sparc-solaris/texi2dvi
diff options
context:
space:
mode:
Diffstat (limited to 'Master/bin/sparc-solaris/texi2dvi')
-rwxr-xr-xMaster/bin/sparc-solaris/texi2dvi836
1 files changed, 0 insertions, 836 deletions
diff --git a/Master/bin/sparc-solaris/texi2dvi b/Master/bin/sparc-solaris/texi2dvi
deleted file mode 100755
index 18f6f59322b..00000000000
--- a/Master/bin/sparc-solaris/texi2dvi
+++ /dev/null
@@ -1,836 +0,0 @@
-#! /bin/sh
-# texi2dvi --- produce DVI (or PDF) files from Texinfo (or LaTeX) sources.
-# $Id: texi2dvi,v 1.42 2005/02/11 13:35:14 karl Exp $
-#
-# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2001,
-# 2002, 2003, 2004, 2005 Free Software Foundation, Inc.
-#
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, you can either send email to this
-# program's maintainer or write to: The Free Software Foundation,
-# Inc.; 59 Temple Place, Suite 330; Boston, MA 02111-1307, USA.
-#
-# Original author: Noah Friedman.
-#
-# Please send bug reports, etc. to bug-texinfo@gnu.org.
-# If possible, please send a copy of the output of the script called with
-# the `--debug' option when making a bug report.
-
-test -f /bin/ksh && test -z "$RUNNING_KSH" \
- && { UNAMES=`uname -s`; test "x$UNAMES" = xULTRIX; } 2>/dev/null \
- && { RUNNING_KSH=true; export RUNNING_KSH; exec /bin/ksh $0 ${1+"$@"}; }
-unset RUNNING_KSH
-
-# This string is expanded by rcs automatically when this file is checked out.
-rcs_revision='$Revision: 1.42 $'
-rcs_version=`set - $rcs_revision; echo $2`
-program=`echo $0 | sed -e 's!.*/!!'`
-version="texi2dvi (GNU Texinfo 4.8) $rcs_version
-
-Copyright (C) 2005 Free Software Foundation, Inc.
-There is NO warranty. You may redistribute this software
-under the terms of the GNU General Public License.
-For more information about these matters, see the files named COPYING."
-
-usage="Usage: $program [OPTION]... FILE...
-
-Run each Texinfo or LaTeX FILE through TeX in turn until all
-cross-references are resolved, building all indices. The directory
-containing each FILE is searched for included files. The suffix of FILE
-is used to determine its language (LaTeX or Texinfo).
-
-Makeinfo is used to perform Texinfo macro expansion before running TeX
-when needed.
-
-Operation modes:
- -b, --batch no interaction
- -c, --clean remove all auxiliary files
- -D, --debug turn on shell debugging (set -x)
- -h, --help display this help and exit successfully
- -o, --output=OFILE leave output in OFILE (implies --clean);
- Only one input FILE may be specified in this case
- -q, --quiet no output unless errors (implies --batch)
- -s, --silent same as --quiet
- -v, --version display version information and exit successfully
- -V, --verbose report on what is done
-
-TeX tuning:
- -@ use @input instead of \input; for preloaded Texinfo
- -e, -E, --expand force macro expansion using makeinfo
- -I DIR search DIR for Texinfo files
- -l, --language=LANG specify the LANG of FILE (LaTeX or Texinfo)
- -p, --pdf use pdftex or pdflatex for processing
- -r, --recode call recode before TeX to translate input characters
- -t, --command=CMD insert CMD in copy of input file
- or --texinfo=CMD multiple values accumulate
-
-The values of the BIBTEX, LATEX (or PDFLATEX), MAKEINDEX, MAKEINFO,
-TEX (or PDFTEX), TEXINDEX, and THUMBPDF environment variables are used
-to run those commands, if they are set. Any CMD strings are added
-after @setfilename for Texinfo input, in the first line for LaTeX input.
-
-Email bug reports to <bug-texinfo@gnu.org>,
-general questions and discussion to <help-texinfo@gnu.org>.
-Texinfo home page: http://www.gnu.org/software/texinfo/"
-
-# Initialize variables for option overriding and otherwise.
-# Don't use `unset' since old bourne shells don't have this command.
-# Instead, assign them an empty value.
-batch=false # eval for batch mode
-clean=
-debug=
-escape='\'
-expand= # t for expansion via makeinfo
-miincludes= # makeinfo include path
-oformat=dvi
-oname= # --output
-quiet= # by default let the tools' message be displayed
-recode=false
-set_language=
-textra= # Extra TeX commands to insert in the input file.
-textra_cmd= # sed command to insert TEXTRA where appropriate
-tmpdir=${TMPDIR:-/tmp}/t2d$$ # avoid collisions on 8.3 filesystems.
-txincludes= # TEXINPUTS extensions, with trailing colon
-txiprereq=19990129 # minimum texinfo.tex version with macro expansion
-verb=false # echo for verbose mode
-
-orig_pwd=`pwd`
-
-# Systems which define $COMSPEC or $ComSpec use semicolons to separate
-# directories in TEXINPUTS -- except for Cygwin, where COMSPEC might be
-# inherited, but : is used.
-if test -n "$COMSPEC$ComSpec" && uname | grep -iv cygwin >/dev/null; then
- path_sep=";"
-else
- path_sep=":"
-fi
-
-# Pacify verbose cds.
-CDPATH=${ZSH_VERSION+.}$path_sep
-
-# In case someone crazy insists on using grep -E.
-: ${EGREP=egrep}
-
-# return true if program $1 is somewhere in PATH, else false.
-#
-findprog ()
-{
- foundprog=false
-
- saveIFS=$IFS
- IFS=$path_sep # break path components at the path separator
- for dir in $PATH; do
- # use test -x rather than test -f for DJGPP, where test -x checks
- # for .exe. But test -x will also return true for directories, so
- # explicitly ignore those.
- if test -x "$dir/$1" && test ! -d "$dir/$1"; then
- foundprog=true
- break
-
- # But on cygwin, test -x foo will not find foo.exe. So also check
- # for that.
- elif test -x "$dir/$1.exe"; then
- foundprog=true
- break
- fi
- done
- IFS=$saveIFS
- $foundprog
-}
-
-# Report some information.
-report ()
-{
- for i in "$@"
- do
- echo >&2 "$0: $i"
- done
-}
-
-# Report some verbose information.
-verbose ()
-{
- $verb >&2 "$0: $@"
-}
-
-# Report an error and exit with failure.
-fatal ()
-{
- s=$1
- shift
- report "$@"
- exit $s
-}
-
-# Save TEXINPUTS so we can construct a new TEXINPUTS path for each file.
-# Likewise for bibtex and makeindex.
-tex_envvars="BIBINPUTS BSTINPUTS INDEXSTYLE TEXINPUTS"
-for var in $tex_envvars; do
- eval ${var}_orig=\$$var
- export $var
-done
-
-
-# Push a token among the arguments that will be used to notice when we
-# ended options/arguments parsing.
-# Use "set dummy ...; shift" rather than 'set - ..." because on
-# Solaris set - turns off set -x (but keeps set -e).
-# Use ${1+"$@"} rather than "$@" because Digital Unix and Ultrix 4.3
-# still expand "$@" to a single argument (the empty string) rather
-# than nothing at all.
-arg_sep="$$--$$"
-set dummy ${1+"$@"} "$arg_sep"; shift
-
-#
-# Parse command line arguments.
-while test x"$1" != x"$arg_sep"; do
-
- # Handle --option=value by splitting apart and putting back on argv.
- case "$1" in
- --*=*)
- opt=`echo "$1" | sed -e 's/=.*//'`
- val=`echo "$1" | sed -e 's/[^=]*=//'`
- shift
- set dummy "$opt" "$val" ${1+"$@"}; shift
- ;;
- esac
-
- # This recognizes --quark as --quiet. So what.
- case "$1" in
- -@ ) escape=@;;
- # Silently and without documentation accept -b and --b[atch] as synonyms.
- -b | --b*) batch=true;;
- -c | --c*) clean=t;;
- -D | --d*) debug=t;;
- -e | -E | --e*) expand=t;;
- -h | --h*) echo "$usage"; exit 0;;
- -I | --I*)
- shift
- miincludes="$miincludes -I $1"
- txincludes="$txincludes$1$path_sep"
- ;;
- -l | --l*) shift; set_language=$1;;
- -o | --o*)
- shift
- clean=t
- case "$1" in
- /* | ?:/*) oname=$1;;
- *) oname="$orig_pwd/$1";;
- esac;;
- -p | --p*) oformat=pdf;;
- -q | -s | --q* | --s*) quiet=t; batch=true;;
- -r | --r*) recode=true;;
- -t | --tex* | --com* ) shift; textra="$textra\\
-"`echo "$1" | sed 's/\\\\/\\\\\\\\/g'`;;
- -v | --vers*) echo "$version"; exit 0;;
- -V | --verb*) verb=echo;;
- --) # What remains are not options.
- shift
- while test x"$1" != x"$arg_sep"; do
- set dummy ${1+"$@"} "$1"; shift
- shift
- done
- break;;
- -*)
- fatal 1 "Unknown or ambiguous option \`$1'." \
- "Try \`--help' for more information."
- ;;
- *) set dummy ${1+"$@"} "$1"; shift;;
- esac
- shift
-done
-# Pop the token
-shift
-
-# Interpret remaining command line args as filenames.
-case $# in
- 0)
- fatal 2 "Missing file arguments." "Try \`--help' for more information."
- ;;
- 1) ;;
- *)
- if test -n "$oname"; then
- fatal 2 "Can't use option \`--output' with more than one argument."
- fi
- ;;
-esac
-
-
-# We can't do much without tex.
-#
-if findprog ${TEX:-tex}; then :; else cat <<EOM
-You don't have a working TeX binary (${TEX:-tex}) installed anywhere in
-your PATH, and texi2dvi cannot proceed without one. If you want to use
-this script, you'll need to install TeX (if you don't have it) or change
-your PATH or TEX environment variable (if you do). See the --help
-output for more details.
-
-For information about obtaining TeX, please see http://www.tug.org. If
-you happen to be using Debian, you can get it with this command:
- apt-get install tetex-bin
-EOM
- exit 1
-fi
-
-
-# We want to use etex (or pdftex) if they are available, and the user
-# didn't explicitly specify. We don't check for elatex and pdfelatex
-# because (as of 2003), the LaTeX team has asked that new distributions
-# use etex by default anyway.
-#
-# End up with the TEX and PDFTEX variables set to what we are going to use.
-if test -z "$TEX"; then
- if findprog etex; then TEX=etex; else TEX=tex; fi
-fi
-#
-if test -z "$PDFTEX"; then
- if findprog pdfetex; then PDFTEX=pdfetex; else PDFTEX=pdftex; fi
-fi
-
-
-# Prepare the temporary directory. Remove it at exit, unless debugging.
-if test -z "$debug"; then
- trap "cd / && rm -rf $tmpdir" 0 1 2 15
-fi
-
-# Create the temporary directory with strict rights
-(umask 077 && mkdir $tmpdir) || exit 1
-
-# Prepare the tools we might need. This may be extra work in some
-# cases, but improves the readability of the script.
-utildir=$tmpdir/utils
-mkdir $utildir || exit 1
-
-# A sed script that preprocesses Texinfo sources in order to keep the
-# iftex sections only. We want to remove non TeX sections, and comment
-# (with `@c texi2dvi') TeX sections so that makeinfo does not try to
-# parse them. Nevertheless, while commenting TeX sections, don't
-# comment @macro/@end macro so that makeinfo does propagate them.
-# Unfortunately makeinfo --iftex --no-ifinfo doesn't work well enough
-# (yet), makeinfo can't parse the TeX commands, so work around with sed.
-#
-comment_iftex_sed=$utildir/comment.sed
-cat <<EOF >$comment_iftex_sed
-/^@tex/,/^@end tex/{
- s/^/@c texi2dvi/
-}
-/^@iftex/,/^@end iftex/{
- s/^/@c texi2dvi/
- /^@c texi2dvi@macro/,/^@c texi2dvi@end macro/{
- s/^@c texi2dvi//
- }
-}
-/^@ifnottex/,/^@end ifnottex/{
- s/^/@c (texi2dvi)/
-}
-/^@ifinfo/,/^@end ifinfo/{
- /^@node/p
- /^@menu/,/^@end menu/p
- t
- s/^/@c (texi2dvi)/
-}
-s/^@ifnotinfo/@c texi2dvi@ifnotinfo/
-s/^@end ifnotinfo/@c texi2dvi@end ifnotinfo/
-EOF
-# Uncommenting is simple: Remove any leading `@c texi2dvi'.
-uncomment_iftex_sed=$utildir/uncomment.sed
-cat <<EOF >$uncomment_iftex_sed
-s/^@c texi2dvi//
-EOF
-
-# Compute the list of xref files.
-# Takes the filename (without extension) of which we look for xref
-# files as argument. The index files must be reported last.
-get_xref_files ()
-{
- # Get list of xref files (indexes, tables and lists).
- # Find all files having root filename with a two-letter extension,
- # saves the ones that are really Texinfo-related files. .?o? catches
- # many files: .toc, .log, LaTeX tables and lists, FiXme's .lox, maybe more.
- for this_file in "$1".?o? "$1".aux "$1".?? "$1".idx; do
- # If file is empty, skip it.
- test -s "$this_file" || continue
- # If the file is not suitable to be an index or xref file, don't
- # process it. It's suitable if the first character is a
- # backslash or right quote or at, as long as the first line isn't
- # \input texinfo.
- first_character=`sed -n '1s/^\(.\).*$/\1/p;q' $this_file`
- if (test "x$first_character" = "x\\" \
- && sed 1q $this_file | grep -v '^\\input *texinfo' >/dev/null) \
- || test "x$first_character" = "x'" \
- || test "x$first_character" = "x@"; then
- xref_files="$xref_files ./$this_file"
- fi
- done
- echo "$xref_files"
-}
-
-# Convert relative paths to absolute paths, so we can run in another
-# directory (e.g., in --clean mode, or during the macro-support detection.)
-#
-# Empty path components are meaningful to tex. We rewrite them
-# as `EMPTY' so they don't get lost when we split on $path_sep.
-# Hopefully no one will have an actual directory named EMPTY.
-absolute_filenames ()
-{
- replace_empty="-e 's/^$path_sep/EMPTY$path_sep/g' \
- -e 's/$path_sep\$/${path_sep}EMPTY/g' \
- -e 's/$path_sep$path_sep/${path_sep}EMPTY:/g'"
- _res=`echo "$1" | eval sed $replace_empty`
- save_IFS=$IFS
- IFS=$path_sep
- set x $_res; shift
- _res=.
- for dir
- do
- case $dir in
- EMPTY)
- _res=$_res$path_sep
- ;;
- [\\/]* | ?:[\\/]*) # Absolute paths don't need to be expanded.
- _res=$_res$path_sep$dir
- ;;
- *)
- abs=`cd "$dir" && pwd` && _res=$_res$path_sep$abs
- ;;
- esac
- done
- echo "$_res"
-}
-
-
-# run_tex ()
-# ----------
-# Run TeX as "$tex $tex_args $filename_input", taking care of errors
-# and logs.
-run_tex ()
-{
- # Note that this will be used via an eval: quote properly.
- cmd=$tex
-
- # If possible, make TeX report error locations in GNU format.
- tex_args=
- case $tex_help in
- *file-line-error*) cmd="$cmd --file-line-error";;
- esac
-
- # Tell TeX to be batch if requested.
- if $batch; then
- # \batchmode does not show terminal output at all, so we don't
- # want that. And even in batch mode, TeX insists on having input
- # from the user. Close its stdin to make it impossible.
- cmd="$cmd </dev/null '${escape}nonstopmode' '${escape}input'"
- fi
-
- cmd="$cmd '$filename_input'"
-
- verbose "Running $cmd ..."
- if eval "$cmd" >&5; then :; else
- test "$clean" = t \
- && cp "$filename_noext.log" "$orig_pwd"
- fatal 1 "$tex exited with bad status, quitting." \
- "see $filename_noext.log for errors."
- fi
-}
-
-# File descriptor usage:
-# 0 standard input
-# 1 standard output (--verbose messages)
-# 2 standard error
-# 3 some systems may open it to /dev/tty
-# 4 used on the Kubota Titan
-# 5 tools output (turned off by --quiet)
-# 6 tracing/debugging (set -x output, etc.)
-
-# Tools' output. If quiet, discard, else redirect to the message flow.
-if test "$quiet" = t; then
- exec 5>/dev/null
-else
- exec 5>&1
-fi
-
-# Enable tracing
-if test "$debug" = t; then
- exec 6>&1
- set -x
-else
- exec 6>/dev/null
-fi
-
-#
-# TeXify files.
-
-for command_line_filename in ${1+"$@"}; do
- verbose "Processing $command_line_filename ..."
-
- # If the COMMAND_LINE_FILENAME is not absolute (e.g., --debug.tex),
- # prepend `./' in order to avoid that the tools take it as an option.
- echo "$command_line_filename" | $EGREP '^(/|[A-z]:/)' >&6 \
- || command_line_filename="./$command_line_filename"
-
- # See if the file exists. If it doesn't we're in trouble since, even
- # though the user may be able to reenter a valid filename at the tex
- # prompt (assuming they're attending the terminal), this script won't
- # be able to find the right xref files and so forth.
- if test ! -r "$command_line_filename"; then
- report "Could not read $command_line_filename, skipping."
- continue
- fi
-
- # Get the name of the current directory. We want the full path
- # because in clean mode we are in tmp, in which case a relative
- # path has no meaning.
- filename_dir=`echo $command_line_filename | sed 's!/[^/]*$!!;s!^$!.!'`
- filename_dir=`cd "$filename_dir" >/dev/null && pwd`
-
- # Strip directory part but leave extension.
- filename_ext=`basename "$command_line_filename"`
- # Strip extension.
- filename_noext=`echo "$filename_ext" | sed 's/\.[^.]*$//'`
- ext=`echo "$filename_ext" | sed 's/^.*\.//'`
-
- # _src. Use same basename since we want to generate aux files with
- # the same basename as the manual. If --expand, then output the
- # macro-expanded file to here, else copy the original file.
- tmpdir_src=$tmpdir/src
- filename_src=$tmpdir_src/$filename_noext.$ext
-
- # _xtr. The file with the user's extra commands.
- tmpdir_xtr=$tmpdir/xtr
- filename_xtr=$tmpdir_xtr/$filename_noext.$ext
-
- # _rcd. The Texinfo file recoded in 7bit.
- tmpdir_rcd=$tmpdir/rcd
- filename_rcd=$tmpdir_rcd/$filename_noext.$ext
-
- # _bak. Copies of the previous xref files (another round is run if
- # they differ from the new one).
- tmpdir_bak=$tmpdir/bak
-
- # Make all those directories and give up if we can't succeed.
- mkdir $tmpdir_src $tmpdir_xtr $tmpdir_rcd $tmpdir_bak || exit 1
-
- # Source file might include additional sources.
- # We want `.:$orig_pwd' before anything else. (We'll add `.:' later
- # after all other directories have been turned into absolute paths.)
- # `.' goes first to ensure that any old .aux, .cps,
- # etc. files in ${directory} don't get used in preference to fresher
- # files in `.'. Include orig_pwd in case we are in clean mode, where
- # we've cd'd to a temp directory.
- common="$orig_pwd$path_sep$filename_dir$path_sep$txincludes"
- for var in $tex_envvars; do
- eval ${var}="\$common\$${var}_orig"
- export $var
- done
-
- # Convert relative paths to absolute paths, so we can run in another
- # directory (e.g., in --clean mode, or during the macro-support detection.)
- TEXINPUTS=`absolute_filenames "$TEXINPUTS"`
- verbose "TEXINPUTS: $TEXINPUTS"
- BIBINPUTS=`absolute_filenames "$BIBINPUTS"`
- verbose "BIBINPUTS: $BIBINPUTS"
- BSTINPUTS=`absolute_filenames "$BSTINPUTS"`
- verbose "BSTINPUTS: $BSTINPUTS"
- INDEXSTYLE=`absolute_filenames "$INDEXSTYLE"`
- verbose "INDEXSTYLE: $INDEXSTYLE"
-
- # If the user explicitly specified the language, use that.
- # Otherwise, if the first line is \input texinfo, assume it's texinfo.
- # Otherwise, guess from the file extension.
- if test -n "$set_language"; then
- language=$set_language
- elif sed 1q "$command_line_filename" | grep 'input texinfo' >&6; then
- language=texinfo
- else
- language=
- fi
-
- # Get the type of the file (latex or texinfo) from the given language
- # we just guessed, or from the file extension if not set yet.
- case ${language:-$filename_ext} in
- [lL]a[tT]e[xX] | *.ltx | *.tex)
- # Assume a LaTeX file. LaTeX needs bibtex and uses latex for
- # compilation. No makeinfo.
- language=latex
- bibtex=${BIBTEX:-bibtex}
- makeinfo= # no point in running makeinfo on latex source.
- texindex=${MAKEINDEX:-makeindex}
- textra_cmd=1i
- if test $oformat = dvi; then
- tex=${LATEX:-latex}
- else
- tex=${PDFLATEX:-pdflatex}
- fi
- thumbpdf=${THUMBPDF:-thumbpdf}
- ;;
-
- *)
- # Assume a Texinfo file. Texinfo files need makeinfo, texindex and tex.
- language=texinfo
- bibtex=
- texindex=${TEXINDEX:-texindex}
- textra_cmd='/^@setfilename/a'
- if test $oformat = dvi; then
- # MetaPost also uses the TEX environment variable. If the user
- # has set TEX=latex for that reason, don't bomb out.
- if echo $TEX | grep 'latex$' >/dev/null; then
- tex=tex # don't bother trying to find etex
- else
- tex=$TEX
- fi
- else
- tex=$PDFTEX
- fi
- # Unless required by the user, makeinfo expansion is wanted only
- # if texinfo.tex is too old.
- if test "$expand" = t; then
- makeinfo=${MAKEINFO:-makeinfo}
- else
- # Check if texinfo.tex performs macro expansion by looking for
- # its version. The version is a date of the form YEAR-MO-DA.
- # We don't need to use [0-9] to match the digits since anyway
- # the comparison with $txiprereq, a number, will fail with non
- # digits.
- # Run in the tmpdir to avoid leaving files.
- (
- cd $tmpdir
- echo '\input texinfo.tex @bye' >txiversion.tex
- # Be sure that if tex wants to fail, it is not interactive:
- # close stdin.
- $tex txiversion.tex </dev/null
- ) >$tmpdir/txiversion.out 2>$tmpdir/txiversion.err
- if test $? != 0; then
- cat $tmpdir/txiversion.out
- cat $tmpdir/txiversion.err >&2
- fatal 1 "texinfo.tex appears to be broken, quitting."
- fi
- eval `sed -n 's/^.*\[\(.*\)version \(....\)-\(..\)-\(..\).*$/txiformat=\1 txiversion="\2\3\4"/p' $tmpdir/txiversion.out`
- verbose "texinfo.tex preloaded as \`$txiformat', version is \`$txiversion' ..."
- if test "$txiprereq" -le "$txiversion" >/dev/null 2>&1; then
- makeinfo=
- else
- makeinfo=${MAKEINFO:-makeinfo}
- fi
- # As long as we had to run TeX, offer the user this convenience:
- test "$txiformat" = Texinfo && escape=@
- fi
- thumbpdf=${THUMBPDF:-thumbpdf}
- ;;
- esac
-
- # Go to $tmpdir to try --help, since old versions that don't accept
- # --help will generate a texput.log.
- tex_help=`cd $tmpdir >/dev/null && $tex --help </dev/null 2>&1`
-
- # Expand macro commands in the original source file using Makeinfo.
- # Always use `end' footnote style, since the `separate' style
- # generates different output (arguably this is a bug in -E).
- # Discard main info output, the user asked to run TeX, not makeinfo.
- if test -n "$makeinfo"; then
- verbose "Macro-expanding $command_line_filename to $filename_src ..."
- sed -f $comment_iftex_sed "$command_line_filename" \
- | $makeinfo --footnote-style=end -I "$filename_dir" $miincludes \
- -o /dev/null --macro-expand=- \
- | sed -f $uncomment_iftex_sed >"$filename_src"
- filename_input=$filename_src
- fi
-
- # If makeinfo failed (or was not even run), use the original file as input.
- if test $? -ne 0 \
- || test ! -r "$filename_src"; then
- verbose "Reverting to $command_line_filename ..."
- filename_input=$filename_dir/$filename_ext
- fi
-
- # Used most commonly for @finalout, @smallbook, etc.
- if test -n "$textra"; then
- verbose "Inserting extra commands: $textra"
- sed "$textra_cmd\\
-$textra" "$filename_input" >"$filename_xtr"
- filename_input=$filename_xtr
- fi
-
- # If this is a Texinfo file with a specified input encoding, and
- # recode is available, then recode to plain 7 bit Texinfo.
- if test $language = texinfo; then
- pgm='s/^ *@documentencoding *\([^ ][^ ]*\) *$/\1/
- t found
- d
- :found
- q'
- encoding=`sed -e "$pgm" "$filename_input"`
- if $recode && test -n "$encoding" && findprog recode; then
- verbose "Recoding from $encoding to Texinfo."
- if recode "$encoding"..texinfo <"$filename_input" >"$filename_rcd" \
- && test -s "$filename_rcd"; then
- filename_input=$filename_rcd
- else
- verbose "Recoding failed, using original input."
- fi
- fi
- fi
-
- # If clean mode was specified, then move to the temporary directory.
- if test "$clean" = t; then
- verbose "cd $tmpdir_src"
- cd "$tmpdir_src" || exit 1
- fi
-
- while :; do # will break out of loop below
- orig_xref_files=`get_xref_files "$filename_noext"`
-
- # Save copies of originals for later comparison.
- if test -n "$orig_xref_files"; then
- verbose "Backing up xref files: `echo $orig_xref_files | sed 's|\./||g'`"
- cp $orig_xref_files $tmpdir_bak
- fi
-
- # Run bibtex on current file.
- # - If its input (AUX) exists.
- # - If AUX contains both `\bibdata' and `\bibstyle'.
- # - If some citations are missing (LOG contains `Citation').
- # or the LOG complains of a missing .bbl
- #
- # We run bibtex first, because I can see reasons for the indexes
- # to change after bibtex is run, but I see no reason for the
- # converse.
- #
- # Don't try to be too smart. Running bibtex only if the bbl file
- # exists and is older than the LaTeX file is wrong, since the
- # document might include files that have changed. Because there
- # can be several AUX (if there are \include's), but a single LOG,
- # looking for missing citations in LOG is easier, though we take
- # the risk to match false messages.
- if test -n "$bibtex" \
- && test -r "$filename_noext.aux" \
- && test -r "$filename_noext.log" \
- && (grep '^\\bibdata[{]' "$filename_noext.aux" \
- && grep '^\\bibstyle[{]' "$filename_noext.aux" \
- && (grep 'Warning:.*Citation.*undefined' "$filename_noext.log" \
- || grep 'No file .*\.bbl\.' "$filename_noext.log")) \
- >&6 2>&1; \
- then
- verbose "Running $bibtex $filename_noext ..."
- $bibtex "$filename_noext" >&5 ||
- fatal 1 "$bibtex exited with bad status, quitting."
- fi
-
- # What we'll run texindex on -- exclude non-index files.
- # Since we know index files are last, it is correct to remove everything
- # before .aux and .?o?. But don't really do <anything>o<anything>
- # -- don't match whitespace as <anything>.
- # Otherwise, if orig_xref_files contains something like
- # foo.xo foo.whatever
- # the space after the o will get matched.
- index_files=`echo "$orig_xref_files" \
- | sed "s!.*\.aux!!g;
- s!./$filename_noext\.[^ ]o[^ ]!!g;
- s/^[ ]*//;s/[ ]*$//"`
- # Run texindex (or makeindex) on current index files. If they
- # already exist, and after running TeX a first time the index
- # files don't change, then there's no reason to run TeX again.
- # But we won't know that if the index files are out of date or
- # nonexistent.
- if test -n "$texindex" && test -n "$index_files"; then
- verbose "Running $texindex $index_files ..."
- $texindex $index_files 2>&5 1>&2 ||
- fatal 1 "$texindex exited with bad status, quitting."
- fi
-
- # Finally, run TeX.
- run_tex
-
- # Decide if looping again is needed.
- finished=t
-
- # LaTeX (and the package changebar) report in the LOG file if it
- # should be rerun. This is needed for files included from
- # subdirs, since texi2dvi does not try to compare xref files in
- # subdirs. Performing xref files test is still good since LaTeX
- # does not report changes in xref files.
- if grep "Rerun to get" "$filename_noext.log" >&6 2>&1; then
- finished=
- fi
-
- # Check if xref files changed.
- new_xref_files=`get_xref_files "$filename_noext"`
- verbose "Original xref files = `echo $orig_xref_files | sed 's|\./||g'`"
- verbose "New xref files = `echo $new_xref_files | sed 's|\./||g'`"
-
- # If old and new lists don't at least have the same file list,
- # then one file or another has definitely changed.
- test "x$orig_xref_files" != "x$new_xref_files" && finished=
-
- # File list is the same. We must compare each file until we find
- # a difference.
- if test -n "$finished"; then
- for this_file in $new_xref_files; do
- verbose "Comparing xref file `echo $this_file | sed 's|\./||g'` ..."
- # cmp -s returns nonzero exit status if files differ.
- if cmp -s "$this_file" "$tmpdir_bak/$this_file"; then :; else
- # We only need to keep comparing until we find one that
- # differs, because we'll have to run texindex & tex again no
- # matter how many more there might be.
- finished=
- verbose "xref file `echo $this_file | sed 's|\./||g'` differed ..."
- test "$debug" = t && diff -c "$tmpdir_bak/$this_file" "$this_file"
- break
- fi
- done
- fi
-
- # If finished, exit the loop, else rerun the loop.
- test -n "$finished" && break
- done # while :;
-
- # If we were using thumbpdf and producing PDF, then run thumbpdf
- # and TeX one last time.
- if test $oformat = pdf \
- && test -r "$filename_noext.log" \
- && grep 'thumbpdf\.sty' "$filename_noext.log" >&6 2>&1; \
- then
- verbose "Running $thumbpdf $filename_noext ..."
- $thumbpdf "$filename_noext" >&5 ||
- fatal 1 "$thumbpdf exited with bad status, quitting."
- run_tex
- fi
-
-
- # If we were in clean mode, compilation was in a tmp directory.
- # Copy the DVI (or PDF) file into the directory where the compilation
- # has been done. (The temp dir is about to get removed anyway.)
- # We also return to the original directory so that
- # - the next file is processed in correct conditions
- # - the temporary file can be removed
- if test -n "$clean"; then
- if test -n "$oname"; then
- dest=$oname
- else
- dest=$orig_pwd
- fi
- verbose "Copying $oformat file from `pwd` to $dest"
- cp -p "./$filename_noext.$oformat" "$dest"
- cd / # in case $orig_pwd is on a different drive (for DOS)
- cd $orig_pwd || exit 1
- fi
-
- # Remove temporary files.
- if test "x$debug" = "x"; then
- verbose "Removing $tmpdir_src $tmpdir_xtr $tmpdir_bak ..."
- cd /
- rm -rf $tmpdir_src $tmpdir_xtr $tmpdir_bak
- fi
-done
-
-verbose "done."
-exit 0 # exit successfully, not however we ended the loop.