summaryrefslogtreecommitdiff
path: root/Master/bin/i386-solaris/mktexpk
diff options
context:
space:
mode:
Diffstat (limited to 'Master/bin/i386-solaris/mktexpk')
-rwxr-xr-xMaster/bin/i386-solaris/mktexpk265
1 files changed, 265 insertions, 0 deletions
diff --git a/Master/bin/i386-solaris/mktexpk b/Master/bin/i386-solaris/mktexpk
new file mode 100755
index 00000000000..baed82a83fa
--- /dev/null
+++ b/Master/bin/i386-solaris/mktexpk
@@ -0,0 +1,265 @@
+#!/bin/sh
+# original mktexpk -- make a new PK font, because one wasn't found.
+#
+# (If you change or delete the word `original' on the previous line,
+# installation won't write this script over yours.)
+#
+# Originally written by Thomas Esser, Karl Berry, and Olaf Weber.
+# Report bugs to tex-k@tug.org.
+# Public domain.
+
+version='$Id: mktexpk,v 1.34 2005/06/21 10:49:10 olaf Exp $'
+progname=`echo $0 | sed 's%.*/%%'`
+usage="Usage: $progname [OPTIONS] NAME [REDIRECT],
+ Create a PK font.
+
+--dpi DPI use resolution DPI.
+--bdpi BDPI use base resolution BDPI.
+--mag MAG use magnificiation MAG.
+--mfmode MODE use MODE as the METAFONT mode.
+--destdir DESTDIR write fonts in DESTDIR.
+
+Try to create a PK file for NAME at resolution DPI, with an assumed
+device base resolution of BDPI, and a Metafont \`mag' of MAG. Use MODE
+for the METAFONT mode. Use DESTDIR for the root of where to install
+into, either the absolute directory name to use (if it starts with a
+/) or relative to the default DESTDIR (if not). REDIRECT, if supplied,
+is a string of the form '>&n', where n is the number of the file
+descriptor which is to receive, instead of stdout, the name of the
+newly created pk file."
+
+# Handle non-positional options, except for --version/--help
+while test $# -gt 0; do
+ case "$1" in
+ --destdir) shift; DEST="$1"; shift ;;
+ --destdir=*) DEST=`echo "$1" | sed 's/--destdir=//'`; shift ;;
+ --dpi) shift; DPI="$1"; shift ;;
+ --dpi=*) DPI=`echo "$1" | sed 's/--dpi=//'`; shift ;;
+ --bdpi) shift; BDPI="$1"; shift ;;
+ --bdpi=*) BDPI=`echo "$1" | sed 's/--bdpi=//'`; shift ;;
+ --mfmode) shift; test "x$1" != "x/" && MODE="$1"; shift ;;
+ --mfmode=*) test "x$1" != "x--mfmode/" \
+ && MODE=`echo "$1" | sed 's/--mfmode=//'`; shift ;;
+ --mag) shift; MAG="$1"; shift;;
+ --mag=*) MAG=`echo "$1" | sed '/s--mag=//'`; shift;;
+ --version|-version) break ;;
+ --help|-help) break ;;
+ *) break ;;
+ esac
+done
+
+if test "x$2" != x; then
+ tail="`echo \"x$2\" | sed 's/^x>&//' | grep '^[0-9]*$'`"
+ if test -z "$tail"; then
+ echo "$progname: argument '$2' ignored - bad file number" >&2
+ elif test "$tail" != 1; then
+ eval 'exec 1>&$tail'
+ fi
+fi
+
+mt_max_args=2
+
+# Common code for all scripts.
+: ${MT_TEXMFMAIN=`kpsewhich --expand-path='$TEXMFMAIN'`}
+: ${MT_MKTEX_OPT=`kpsewhich --format='web2c files' mktex.opt`}
+test -n "$MT_MKTEX_OPT" || MT_MKTEX_OPT="$MT_TEXMFMAIN/web2c/mktex.opt"
+if test ! -f "$MT_MKTEX_OPT"; then
+ echo "$progname: Cannot find mktex.opt; check your installation." >&2
+ exit 1
+fi
+
+. "$MT_MKTEX_OPT"
+
+# Where do potential driver files belong?
+case "$MT_FEATURES" in
+ *nomfdrivers*)
+ : ${MT_MFDESTDIR=`pwd`}
+ export MT_MFDESTDIR;;
+esac
+
+# Since we want to pass the generated filename and only that filename
+# back to the caller on standard output, we do some redirections so
+# regular echo's will end up on stderr, and do an echo >$STDOUT at the end.
+# Then the contents of $STDOUT will be echoed to stdout by a trap.
+
+# start of redirection stdout -> stderr, stdin <- /dev/null
+(
+
+NAME=$1
+
+if kpsewhich $NAME.mf >/dev/null 2>&1 || mktexmf $NAME >/dev/null 2>&1; then
+ # determine the progname of metafont to use; prefer mf-nowin.
+ if (mf-nowin --version) >/dev/null 2>&1; then
+ MF="mf-nowin -progname=mf"
+ else
+ MF=mf
+ fi
+
+ # Check that $BDPI and $MODE are consistent; if not, ignore the mode and
+ # hope we can correctly guess it from bdpi. (People like to specify the
+ # resolution on the command line, not the mode so much.)
+ if test -n "$MODE"; then
+ mf_bdpi=`$MF \
+'\mode:='$MODE';mode_setup;message"BDPI= "&decimal round pixels_per_inch;end.'\
+ </dev/null \
+ | awk '/DPI=/ {print $2}'`
+ if test "x$mf_bdpi" != x$BDPI; then
+ echo "$progname: Mismatched mode $MODE and resolution $BDPI; ignoring mode." >&2
+ MODE=
+ fi
+ fi
+
+ # If an explicit mode is not supplied, try to guess. You can get a
+ # list of extant modes from ftp://ftp.tug.org/tex/modes.mf.
+ if test -z "$MODE" || test "x$MODE" = xdefault; then
+ case "$BDPI" in
+ 85) MODE=sun;;
+ 100) MODE=nextscrn;;
+ 180) MODE=toshiba;;
+ 300) MODE=cx;;
+ 360) MODE=epstylus;;
+ 400) MODE=nexthi;;
+ 600) MODE=ljfour;;
+ 720) MODE=epscszz;;
+ 1200) MODE=ultre;;
+ 1270) MODE=linoone;;
+ 8000) MODE=dpdfezzz;;
+ *) echo "$progname: Can't guess mode for $BDPI dpi devices." >&2
+ echo "$progname: Use a config file or option to specify the mode; see:" >&2
+ echo "$progname: http://tug.org/texinfohtml/kpathsea.html#Unable-to-generate-fonts" >&2
+ exit 1
+ esac
+ fi
+
+ # Run Metafont. Always use plain Metafont, since reading cmbase.mf
+ # does not noticeably slow things down.
+ cmd="$MF \mode:=$MODE; mag:=$MAG; nonstopmode; input $NAME"
+else
+ MODE=modeless
+ # ps_to_pk is set in mktex.opt
+ case $ps_to_pk in
+ gsftopk)
+ if $ps_to_pk -t "$NAME"; then
+ cmd="$ps_to_pk $NAME $DPI"
+ fi;;
+ ps2pk)
+ # grep for the font in $PSMAPFILE. These are base font names, such as
+ # rpplr (the original) or pplr0 (an interim step) or pplr8r (current).
+ : ${PSMAPFILE=`kpsewhich --format=map psfonts.map ps2pk.map`}
+ pattern="^$NAME"'([ ]|$)'
+ psline=`egrep "$pattern" $PSMAPFILE | tail -1`
+ if test -n "$psline"; then
+ set x `echo "$psline" | sed 's%[<["]%%g'`
+ shift; shift; shift;
+ encoding=; psname=; slant=; extend=
+ while test ! -z "$1"; do
+ case "$1" in
+ *.enc) encoding="-e $1";;
+ *.pf[ab]) psname="$1";;
+ *SlantFont) slant="-S $lastopt";;
+ *ExtendFont) extend="-E $lastopt";;
+ esac
+ lastopt="$1"
+ shift
+ done
+ # Guessing the name of the type1 font file as fallback:
+ ANAME=`echo $NAME | sed 's/8r$/8a/'`
+ for i in $NAME.pfa $NAME.pfb $ANAME.pfa $ANAME.pfb; do
+ if kpsewhich $i >/dev/null 2>&1; then
+ psname=$i
+ break
+ fi
+ done
+
+ if [ -n "$psname" ]; then
+ cmd="ps2pk -v -X$DPI -R$BDPI $slant $extend $encoding $psname $NAME.${DPI}pk"
+ else
+ if gsftopk -t "$NAME"; then
+ echo "$progname: cannot find $NAME.pfa or $NAME.pfb. Trying gsftopk." >&2
+ cmd="gsftopk $NAME $DPI"
+ fi
+ fi
+ fi;;
+ esac
+
+ # unsupported by $ps_to_pk, try other conversions:
+ if test -z "$cmd"; then
+ if (ttf2pk -t -q $NAME) >/dev/null 2>&1; then
+ cmd="ttf2pk -q $NAME $DPI"
+ elif (hbf2gf -t -q $NAME) >/dev/null 2>&1; then
+ cmd="hbf2gf -q -p $NAME $DPI"
+ else
+ echo "$progname: don't know how to create bitmap font for $NAME." >&2
+ exit 1
+ fi
+ fi
+fi
+
+OIFS=$IFS; IFS=$SEP
+set x `"$MT_MKTEXNAM" $NAME $DPI $MODE $DEST`; shift
+IFS=$OIFS
+
+PKDEST="$1"
+PKDESTDIR=`echo "$PKDEST" | sed 's%/[^/][^/]*$%%'` # can't rely on dirname
+PKNAME=`basename "$PKDEST"`
+GFNAME=$NAME.${DPI}gf
+
+if test -r "$PKDESTDIR/$PKNAME"; then
+ echo "$progname: $PKDESTDIR/$PKNAME already exists." >&2
+ echo "$PKDESTDIR/$PKNAME" >$STDOUT
+ "$MT_MKTEXUPD" "$PKDESTDIR" $PKNAME
+ exit 0
+fi
+
+"$MT_MKTEXDIR" "$PKDESTDIR"
+if test ! -d "$PKDESTDIR"; then
+ echo "$progname: $MT_MKTEXDIR $PKDESTDIR failed." >&2
+ exit 1
+fi
+
+echo "$progname: Running $cmd"
+$cmd </dev/null || {
+ # Don't abort if only "Strange path", "bad pos" or "angle(0,0)"
+ # errors occurr.
+ grep '^!' $NAME.log | sort >$$.errs 2>/dev/null
+ grep '^! Strange path' $$.errs >$$.strange 2>/dev/null
+ grep '^! bad pos.' $$.errs >$$.badpos 2>/dev/null
+ grep '^! angle(0,0) is taken as zero.' $$.errs >$$.angle 2>/dev/null
+ cat $$.badpos $$.strange $$.angle | sort > $$.errs_accept
+ if cmp $$.errs $$.errs_accept >/dev/null 2>&1; then
+ test -s $$.strange >/dev/null 2>&1 \
+ && echo "$progname: warning: \`$cmd' caused strange path errors." >&2
+ test -s $$.badpos >/dev/null 2>&1 \
+ && echo "$progname: warning: \`$cmd' caused bad pos errors." >&2
+ test -s $$.angle >/dev/null 2>&1 \
+ && echo "$progname: warning: \`$cmd' caused angle(0,0) errors." >&2
+ else
+ echo "$progname: \`$cmd' failed." >&2
+ test -s $NAME.log && mv -f $NAME.log "$KPSE_DOT"
+ exit 1;
+ fi
+}
+
+test -r $GFNAME && { gftopk ./$GFNAME $PKNAME || exit 1; }
+test ! -f $PKNAME && test -f $NAME.${DPI}pk && mv $NAME.${DPI}pk $PKNAME
+if test ! -s $PKNAME; then
+ echo "$progname: \`$cmd' failed to make $PKNAME." >&2
+ exit 1
+fi
+
+# Install the PK file carefully, since others may be working simultaneously.
+# Use cp when mv fails, since DOS will fail mv for deeply-nested directories.
+mv $PKNAME "$PKDESTDIR/pk$$.tmp" 2>/dev/null \
+ || cp $PKNAME "$PKDESTDIR/pk$$.tmp" || exit 1
+cd "$PKDESTDIR" || exit 1
+chmod `kpsestat -xst,go-w .` pk$$.tmp
+test -r $PKNAME || mv pk$$.tmp $PKNAME || exit 1
+
+# Update ls-R if necessary.
+"$MT_MKTEXUPD" "$PKDESTDIR" $PKNAME
+
+# If this line (or an equivalent) is not present, dvipsk/xdvik/dviljk
+# will think mktexpk failed. Any other output to stdout will also lose.
+echo "$PKDESTDIR/$PKNAME" >$STDOUT
+echo "$progname: $PKDESTDIR/$PKNAME: successfully generated." >&2
+) 1>&2 </dev/null