diff options
Diffstat (limited to 'Build/source/utils/xindy-old/doc')
38 files changed, 0 insertions, 5291 deletions
diff --git a/Build/source/utils/xindy-old/doc/Makefile.am b/Build/source/utils/xindy-old/doc/Makefile.am deleted file mode 100644 index dff5707beda..00000000000 --- a/Build/source/utils/xindy-old/doc/Makefile.am +++ /dev/null @@ -1,73 +0,0 @@ -## Use `autoreconf' in top-level directory to recreate all -## autoconf/automake files. -## Or, call `automake Makefile' to create only Makefile.in. - -## Copyright (C) 2004-2005 by Gour. -## -## This program is free software; you can redistribute it and/or -## modify it under the terms of the GNU General Public License as -## published by the Free Software Foundation; either version 2 of the -## License, or (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, but -## WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -## General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program in the file COPYING; if not, write to the -## Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, -## Boston, MA 02110-1301 USA. - -SUBDIRS = style-tutorial - -FILES = \ - manual.html \ - manual-1.html \ - manual-2.html \ - manual-3.html \ - manual-4.html \ - manual-5.html \ - manual-6.html \ - manual-7.html \ - faq.html \ - faq-1.html \ - faq-2.html \ - faq-3.html \ - faq-4.html \ - style-tutorial.html \ - style-tutorial-1.html \ - style-tutorial-2.html \ - style-tutorial-3.html \ - style-tutorial-4.html \ - dataflow.gif \ - index.gif \ - mappings.gif \ - README - -PDFS = xindy.pdf texindy.pdf tex2xindy.pdf - -EXTRA_DIST = $(FILES) $(PDFS) - -dist_noinst_DATA = xindy.v2.pdf makeindex4.pdf - -doc_DATA = $(FILES) $(PDFS) - -if MAINTAINER_MODE -GROFF = groff - -$(srcdir)/xindy.pdf: $(top_srcdir)/user-commands/xindy.1 - $(GROFF) -man -P-g $< | ps2pdf - $@ - -$(srcdir)/texindy.pdf: $(top_srcdir)/user-commands/texindy.1 - $(GROFF) -man -P-g $< | ps2pdf - $@ - -$(srcdir)/makeindex4.pdf: $(top_srcdir)/user-commands/makeindex4.1 - $(GROFF) -man -P-g $< | ps2pdf - $@ - -$(srcdir)/xindy.v2.pdf: $(top_srcdir)/user-commands/xindy.v2.1 - $(GROFF) -man -P-g $< | ps2pdf - $@ - -$(srcdir)/tex2xindy.pdf: $(top_srcdir)/tex2xindy/tex2xindy.1 - $(GROFF) -man -P-g $< | ps2pdf - $@ -endif diff --git a/Build/source/utils/xindy-old/doc/Makefile.in b/Build/source/utils/xindy-old/doc/Makefile.in deleted file mode 100644 index 86ebf8962d6..00000000000 --- a/Build/source/utils/xindy-old/doc/Makefile.in +++ /dev/null @@ -1,631 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = doc -DIST_COMMON = README $(dist_noinst_DATA) $(srcdir)/Makefile.am \ - $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \ - $(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(install_sh) -d -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -SOURCES = -DIST_SOURCES = -RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ - html-recursive info-recursive install-data-recursive \ - install-dvi-recursive install-exec-recursive \ - install-html-recursive install-info-recursive \ - install-pdf-recursive install-ps-recursive install-recursive \ - installcheck-recursive installdirs-recursive pdf-recursive \ - ps-recursive uninstall-recursive -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__installdirs = "$(DESTDIR)$(docdir)" -DATA = $(dist_noinst_DATA) $(doc_DATA) -RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ - distclean-recursive maintainer-clean-recursive -AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \ - $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \ - distdir -ETAGS = etags -CTAGS = ctags -DIST_SUBDIRS = $(SUBDIRS) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -am__relativize = \ - dir0=`pwd`; \ - sed_first='s,^\([^/]*\)/.*$$,\1,'; \ - sed_rest='s,^[^/]*/*,,'; \ - sed_last='s,^.*/\([^/]*\)$$,\1,'; \ - sed_butlast='s,/*[^/]*$$,,'; \ - while test -n "$$dir1"; do \ - first=`echo "$$dir1" | sed -e "$$sed_first"`; \ - if test "$$first" != "."; then \ - if test "$$first" = ".."; then \ - dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \ - dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \ - else \ - first2=`echo "$$dir2" | sed -e "$$sed_first"`; \ - if test "$$first2" = "$$first"; then \ - dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \ - else \ - dir2="../$$dir2"; \ - fi; \ - dir0="$$dir0"/"$$first"; \ - fi; \ - fi; \ - dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \ - done; \ - reldir="$$dir2" -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CLISP = @CLISP@ -CLISP_LIB = @CLISP_LIB@ -CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LATEX = @LATEX@ -LDFLAGS = @LDFLAGS@ -LEX = @LEX@ -LEXLIB = @LEXLIB@ -LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LISP_RUN = @LISP_RUN@ -LTLIBOBJS = @LTLIBOBJS@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MKDIR_P = @MKDIR_P@ -OBJEXT = @OBJEXT@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PDFLATEX = @PDFLATEX@ -PERL = @PERL@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -VERSION = @VERSION@ -XINDY_RUN = @XINDY_RUN@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -SUBDIRS = style-tutorial -FILES = \ - manual.html \ - manual-1.html \ - manual-2.html \ - manual-3.html \ - manual-4.html \ - manual-5.html \ - manual-6.html \ - manual-7.html \ - faq.html \ - faq-1.html \ - faq-2.html \ - faq-3.html \ - faq-4.html \ - style-tutorial.html \ - style-tutorial-1.html \ - style-tutorial-2.html \ - style-tutorial-3.html \ - style-tutorial-4.html \ - dataflow.gif \ - index.gif \ - mappings.gif \ - README - -PDFS = xindy.pdf texindy.pdf tex2xindy.pdf -EXTRA_DIST = $(FILES) $(PDFS) -dist_noinst_DATA = xindy.v2.pdf makeindex4.pdf -doc_DATA = $(FILES) $(PDFS) -@MAINTAINER_MODE_TRUE@GROFF = groff -all: all-recursive - -.SUFFIXES: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign doc/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): -install-docDATA: $(doc_DATA) - @$(NORMAL_INSTALL) - test -z "$(docdir)" || $(MKDIR_P) "$(DESTDIR)$(docdir)" - @list='$(doc_DATA)'; test -n "$(docdir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(docdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(docdir)" || exit $$?; \ - done - -uninstall-docDATA: - @$(NORMAL_UNINSTALL) - @list='$(doc_DATA)'; test -n "$(docdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(docdir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(docdir)" && rm -f $$files - -# This directory's subdirectories are mostly independent; you can cd -# into them and run `make' without going through this Makefile. -# To change the values of `make' variables: instead of editing Makefiles, -# (1) if the variable is set in `config.status', edit `config.status' -# (which will cause the Makefiles to be regenerated when you run `make'); -# (2) otherwise, pass the desired values on the `make' command line. -$(RECURSIVE_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - target=`echo $@ | sed s/-recursive//`; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - dot_seen=yes; \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done; \ - if test "$$dot_seen" = "no"; then \ - $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ - fi; test -z "$$fail" - -$(RECURSIVE_CLEAN_TARGETS): - @fail= failcom='exit 1'; \ - for f in x $$MAKEFLAGS; do \ - case $$f in \ - *=* | --[!k]*);; \ - *k*) failcom='fail=yes';; \ - esac; \ - done; \ - dot_seen=no; \ - case "$@" in \ - distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ - *) list='$(SUBDIRS)' ;; \ - esac; \ - rev=''; for subdir in $$list; do \ - if test "$$subdir" = "."; then :; else \ - rev="$$subdir $$rev"; \ - fi; \ - done; \ - rev="$$rev ."; \ - target=`echo $@ | sed s/-recursive//`; \ - for subdir in $$rev; do \ - echo "Making $$target in $$subdir"; \ - if test "$$subdir" = "."; then \ - local_target="$$target-am"; \ - else \ - local_target="$$target"; \ - fi; \ - ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ - || eval $$failcom; \ - done && test -z "$$fail" -tags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ - done -ctags-recursive: - list='$(SUBDIRS)'; for subdir in $$list; do \ - test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ - done - -ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - mkid -fID $$unique -tags: TAGS - -TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - set x; \ - here=`pwd`; \ - if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ - include_option=--etags-include; \ - empty_fix=.; \ - else \ - include_option=--include; \ - empty_fix=; \ - fi; \ - list='$(SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test ! -f $$subdir/TAGS || \ - set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \ - fi; \ - done; \ - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - shift; \ - if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \ - test -n "$$unique" || unique=$$empty_fix; \ - if test $$# -gt 0; then \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - "$$@" $$unique; \ - else \ - $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ - $$unique; \ - fi; \ - fi -ctags: CTAGS -CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ - $(TAGS_FILES) $(LISP) - list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ - unique=`for i in $$list; do \ - if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ - done | \ - $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ - END { if (nonempty) { for (i in files) print i; }; }'`; \ - test -z "$(CTAGS_ARGS)$$unique" \ - || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ - $$unique - -GTAGS: - here=`$(am__cd) $(top_builddir) && pwd` \ - && $(am__cd) $(top_srcdir) \ - && gtags -i $(GTAGS_ARGS) "$$here" - -distclean-tags: - -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - test -d "$(distdir)/$$subdir" \ - || $(MKDIR_P) "$(distdir)/$$subdir" \ - || exit 1; \ - fi; \ - done - @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ - if test "$$subdir" = .; then :; else \ - dir1=$$subdir; dir2="$(distdir)/$$subdir"; \ - $(am__relativize); \ - new_distdir=$$reldir; \ - dir1=$$subdir; dir2="$(top_distdir)"; \ - $(am__relativize); \ - new_top_distdir=$$reldir; \ - echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \ - echo " am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \ - ($(am__cd) $$subdir && \ - $(MAKE) $(AM_MAKEFLAGS) \ - top_distdir="$$new_top_distdir" \ - distdir="$$new_distdir" \ - am__remove_distdir=: \ - am__skip_length_check=: \ - am__skip_mode_fix=: \ - distdir) \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-recursive -all-am: Makefile $(DATA) -installdirs: installdirs-recursive -installdirs-am: - for dir in "$(DESTDIR)$(docdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-recursive -install-exec: install-exec-recursive -install-data: install-data-recursive -uninstall: uninstall-recursive - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-recursive -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-recursive - -clean-am: clean-generic mostlyclean-am - -distclean: distclean-recursive - -rm -f Makefile -distclean-am: clean-am distclean-generic distclean-tags - -dvi: dvi-recursive - -dvi-am: - -html: html-recursive - -html-am: - -info: info-recursive - -info-am: - -install-data-am: install-docDATA - -install-dvi: install-dvi-recursive - -install-dvi-am: - -install-exec-am: - -install-html: install-html-recursive - -install-html-am: - -install-info: install-info-recursive - -install-info-am: - -install-man: - -install-pdf: install-pdf-recursive - -install-pdf-am: - -install-ps: install-ps-recursive - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-recursive - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-recursive - -mostlyclean-am: mostlyclean-generic - -pdf: pdf-recursive - -pdf-am: - -ps: ps-recursive - -ps-am: - -uninstall-am: uninstall-docDATA - -.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \ - install-am install-strip tags-recursive - -.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ - all all-am check check-am clean clean-generic ctags \ - ctags-recursive distclean distclean-generic distclean-tags \ - distdir dvi dvi-am html html-am info info-am install \ - install-am install-data install-data-am install-docDATA \ - install-dvi install-dvi-am install-exec install-exec-am \ - install-html install-html-am install-info install-info-am \ - install-man install-pdf install-pdf-am install-ps \ - install-ps-am install-strip installcheck installcheck-am \ - installdirs installdirs-am maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ - pdf-am ps ps-am tags tags-recursive uninstall uninstall-am \ - uninstall-docDATA - - -@MAINTAINER_MODE_TRUE@$(srcdir)/xindy.pdf: $(top_srcdir)/user-commands/xindy.1 -@MAINTAINER_MODE_TRUE@ $(GROFF) -man -P-g $< | ps2pdf - $@ - -@MAINTAINER_MODE_TRUE@$(srcdir)/texindy.pdf: $(top_srcdir)/user-commands/texindy.1 -@MAINTAINER_MODE_TRUE@ $(GROFF) -man -P-g $< | ps2pdf - $@ - -@MAINTAINER_MODE_TRUE@$(srcdir)/makeindex4.pdf: $(top_srcdir)/user-commands/makeindex4.1 -@MAINTAINER_MODE_TRUE@ $(GROFF) -man -P-g $< | ps2pdf - $@ - -@MAINTAINER_MODE_TRUE@$(srcdir)/xindy.v2.pdf: $(top_srcdir)/user-commands/xindy.v2.1 -@MAINTAINER_MODE_TRUE@ $(GROFF) -man -P-g $< | ps2pdf - $@ - -@MAINTAINER_MODE_TRUE@$(srcdir)/tex2xindy.pdf: $(top_srcdir)/tex2xindy/tex2xindy.1 -@MAINTAINER_MODE_TRUE@ $(GROFF) -man -P-g $< | ps2pdf - $@ - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/Build/source/utils/xindy-old/doc/README b/Build/source/utils/xindy-old/doc/README deleted file mode 100644 index 90440f93683..00000000000 --- a/Build/source/utils/xindy-old/doc/README +++ /dev/null @@ -1,14 +0,0 @@ -$Id: README.distrib,v 1.3 2008/01/09 11:11:46 jschrod Exp $ ------------------------------------------------------------- - -This directory contains documentation of `xindy'. - -Manual pages for the commands are created during installation and are -placed in appropriate man directories. -PDF versions of the manual pages have been added here for your convenience. - -The subdirectory ./style-tutorial/ contains the examples that are used -in the xindy style tutorial. - -FAQ and style tutorial are out of date. (Updates are welcome, of course.) -You find more documentation at the xindy Web Site, at http://www.xindy.org/. diff --git a/Build/source/utils/xindy-old/doc/dataflow.gif b/Build/source/utils/xindy-old/doc/dataflow.gif Binary files differdeleted file mode 100644 index 203b5521ba6..00000000000 --- a/Build/source/utils/xindy-old/doc/dataflow.gif +++ /dev/null diff --git a/Build/source/utils/xindy-old/doc/faq-1.html b/Build/source/utils/xindy-old/doc/faq-1.html deleted file mode 100644 index 31fcfba7abd..00000000000 --- a/Build/source/utils/xindy-old/doc/faq-1.html +++ /dev/null @@ -1,169 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN"> -<HTML> -<HEAD> - <META NAME="GENERATOR" CONTENT="SGML-Tools 1.0.9"> - <TITLE>XINDY FAQ: General Questions</TITLE> - <LINK HREF="faq-2.html" REL=next> - - <LINK HREF="faq.html#toc1" REL=contents> -</HEAD> -<BODY> -<A HREF="faq-2.html">Next</A> -Previous -<A HREF="faq.html#toc1">Contents</A> -<HR> -<H2><A NAME="s1">1. General Questions</A></H2> - -<H2><A NAME="ss1.1">1.1 Why a completely new indexing tool? <CODE>makeindex</CODE> works fine!</A> -</H2> - -<P> -<P>With the <EM>International MakeIndex</EM> project, Joachim Schrod and -Gabor Herr have shown that adding extensions to -<CODE>makeindex</CODE> is a difficult job. Thus we have decided to develop a -new indexing tool from scratch. The new tool is based on a new -requirements analysis and offers very interesting features for -processing very complex indexing schemes. The resulting index model is -described in: -<P> -<OL> -<LI> Roger Kehr, <SF>xindy</SF> -- <EM>A Flexible Indexing System</EM>, -Proceedings of the EuroTeX'98, St. Malo, France, March 1998 -</LI> -<LI> Roger Kehr, <SF>xindy</SF> -- <EM>A Flexible Indexing System</EM>, -Technical Report No. 11/1997, Computer Science Department, Darmstadt -University of Technology, 1997. Also accessible from the xindy -homepage. -</LI> -<LI> Roger Kehr, xindy <EM>Ein Flexibles Indexierungssystem</EM>, -Studienarbeit FB Informatik, TH-Darmstadt, November 1995. -</LI> -<LI> Joachim Schrod, <EM>An International Version of MakeIndex</EM>, -Cahiers GUTenberg, 10, p81-90, 1991 -</LI> -<LI> Joachim Schrod and Gabor Herr, <EM>MakeIndex Version 3.0</EM>, -Technical University of Darmstadt, 1991 -</LI> -</OL> -<P> -<P> -<P> -<H2><A NAME="ss1.2">1.2 I'm an old <CODE>makeindex</CODE> wizard. What does <SF>xindy</SF> offer that <CODE>makeindex</CODE> doesn't?</A> -</H2> - -<P> -<P>Here are the most important differences between <SF>xindy</SF> and -<CODE>makeindex</CODE>: -<P> -<P> -<DL> -<P> -<DT><B>Internationalization</B><DD><P><SF>xindy</SF> can be configured to process -indexes for many languages with different letter sets and different -sorting rules. For example, many roman languages such as Italian, -French, Portuguese or Spanish contain accentuated letters such as -À, Á, ñ. Other languages from northern Europe -have letters like Ä, Ø, æ or ß which often -can't be processed by many index processors not talking about sorting -them correctly into an index. The <SF>xindy</SF>-system can be configured -to process these alphabets by defining <EM>sort</EM> and -<EM>merge-rules</EM> that allow expressing of language specific rules. -One example of such a rule would be -<P> -<PRE> -(sort-rule "ä" "ae") -</PRE> -<P>defining that a word containing the umlaut-a will be sorted as if it -contained the letters <CODE>ae</CODE> instead. This is one form of how the -umlaut-a is sorted into german indexes. With an appropriate set of -rules one can express the complete rules of a specific language. -<P> -<DT><B>Location classes.</B><DD><P><CODE>makeindex</CODE> is able to recognize and -process arabic numbers, roman numerals and letter-based alphabets as -specifiers for the indexed location. Simple composite structures of -these are also possible to process. This implicit recognition scheme -has completely been dropped in favour of a well-defined and very -powerful declaration scheme called <EM>location-classes</EM>. Thus, -<SF>xindy</SF> initally does not know any location-class by default and -must be instructed to accept certain location-classes. A typical -declaration might look like: -<P> -<BLOCKQUOTE><CODE> -<PRE> -(define-location-class "page-numbers" ("arabic-numbers")) -</PRE> -</CODE></BLOCKQUOTE> -<P>This declares that page numbers consist of the enumeration of the -arabic numbers. The arabic numbers are referred to as <EM>alphabets</EM>. -Users may use the pre-defined alphabets arabic numbers, roman -numerals, etc. or define new alphabets as needed. See the tutorial -that comes with this distribution for some examples. -<P> -<DT><B>The concept of attributes.</B><DD><P>With <CODE>makeindex</CODE> one can assign a -markup to each index entry using the encapsulators (usually following -the vertical bar sign in an index entry command). For example in the -specification -<P> -<BLOCKQUOTE><CODE> -<PRE> -\index{xindy|bold} -</PRE> -</CODE></BLOCKQUOTE> -<P>the encapsulator is <CODE>bold</CODE> which encapsulates the page-numbers in -the markup-phase. An additional TeX-macro must be supplied to assign -some markup with the page number. This concept has completely been -dropped in <SF>xindy</SF> in favour of a more powerful scheme called -<EM>attributes</EM>. Attributes can be used to (i) define several grouping -and ordering rules with locations and we can define (ii) markup-tags -for the document preparation system. -<P>The result of this design decision is that the user is required to -define the attributes in the style file and not in the document -preparation system. The reasons lie in the more powerful markup scheme -of <SF>xindy</SF> which can't be specified in the document processor anymore. -In fact, the <CODE>makeindex</CODE>-like markup is only a small subset of -<SF>xindy</SF>s features. -<P> -<DT><B>Cross references.</B><DD><P>Cross-references were implemented in -<CODE>makeindex</CODE> with the encapsulation mechanism, which only served for -markup purposes. This has been completely separated in <SF>xindy</SF>. -Here we distinguish cleanly between attributes and cross references. -This makes it possible to implement <EM>checked</EM> cross references, -i.e. cross-refernces that can be checked if they point to an existing -index entry instead of somewhere ``behind-the-moon''. -<P> -<DT><B>Less command-line options.</B><DD><P><SF>xindy</SF> has dropped the usage of -command-line options in favour of a well-defined indexstyle -description language. Thus, options that could be activated at the -command-line level of <CODE>makeindex</CODE> must now be specified in the -indexstyle file. This sounds more restrictive than it is, because the -indexstyle files can be composed from several modules which makes it -possible to write style files in just a few lines of code. -<P> -<DT><B>Raw index parser.</B><DD><P>The parser built into <CODE>makeindex</CODE> has -completely been separated from the core <SF>xindy</SF> system. <SF>xindy</SF> -understands a well-defined specification language for the raw index -that is completely different from <CODE>makeindex</CODE>, but in our opinion -more maintainable than the <CODE>makeindex</CODE> format. This requires a -separate filter that transforms arbitrary indexes to the <SF>xindy</SF> -format. An example filter is the program <CODE>tex2xindy</CODE> that comes -with this distribution. -<P> -</DL> -<P>Summed up, some of the implicit assumptions made by <CODE>makeindex</CODE> -have been replaced and now burdend to the user. The reason is that -many of <CODE>makeindex</CODE>'s assumptions were no longer valid in -multi-language environments or documents with arbitrary location -structures. This also characterizes <SF>xindy</SF> more as a framework -instead of a end-user-tailored product. One should notice that writing -an appropriate index style is an essential part of the document -preparation process and should be tailored to each document anew. -<P> -<P> -<P> -<P> -<HR> -<A HREF="faq-2.html">Next</A> -Previous -<A HREF="faq.html#toc1">Contents</A> -</BODY> -</HTML> diff --git a/Build/source/utils/xindy-old/doc/faq-2.html b/Build/source/utils/xindy-old/doc/faq-2.html deleted file mode 100644 index 00be36138dc..00000000000 --- a/Build/source/utils/xindy-old/doc/faq-2.html +++ /dev/null @@ -1,95 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN"> -<HTML> -<HEAD> - <META NAME="GENERATOR" CONTENT="SGML-Tools 1.0.9"> - <TITLE>XINDY FAQ: xindy Usage</TITLE> - <LINK HREF="faq-3.html" REL=next> - <LINK HREF="faq-1.html" REL=previous> - <LINK HREF="faq.html#toc2" REL=contents> -</HEAD> -<BODY> -<A HREF="faq-3.html">Next</A> -<A HREF="faq-1.html">Previous</A> -<A HREF="faq.html#toc2">Contents</A> -<HR> -<H2><A NAME="s2">2. <SF>xindy</SF> Usage</A></H2> - -<H2><A NAME="ss2.1">2.1 I don't want to write style files. How can I proceed?</A> -</H2> - -<P> -<P>You can use the wrapper program <CODE>makeindex4</CODE>. It tries to do it's -very best to make <SF>xindy</SF> behave as <CODE>makeindex</CODE> does. But if you -ever need to use some of the features of <SF>xindy</SF> you should learn -how to write an index style. Its easy! -<P> -<P> -<P> -<H2><A NAME="ss2.2">2.2 How do I use <CODE>makeindex4</CODE>?</A> -</H2> - -<P> -<P>Process your document as usual. Then run <CODE>makeindex4</CODE> on the index -file. It produces an index that should equal the one you would get -with an ordinary <CODE>makeindex</CODE> run. As far as you are satisfied with -the default behaviour of <CODE>makeindex</CODE>, <CODE>makeindex4</CODE> will produce -comparable results. -<P>Some of the command-line options of <CODE>makeindex</CODE> are accepted by -<CODE>makeindex4</CODE>, others aren't. This may change in future releases, -but we recommend using plain <SF>xindy</SF> after a phase of -investigation, since one cannot use all of its features with -<CODE>makeindex4</CODE>. You will be informed about unsupported command-line -arguments when running <CODE>makeindex4</CODE>. -<P>If you have written special style files for <CODE>makeindex</CODE> they will -no longer work with <CODE>makeindex4</CODE>. Go ahead and write a new style -file for <SF>xindy</SF>. -<P> -<P> -<P> -<H2><A NAME="ss2.3">2.3 How works <CODE>makeindex4</CODE>?</A> -</H2> - -<P> -<P>This job is now done automatically by <CODE>makeindex4</CODE>. It calls -<CODE>tex2xindy</CODE> to transform the raw-index into the format suitable for -<SF>xindy</SF>. <CODE>tex2xindy</CODE> emits some information about the attributes -(aka. encapsulators in <CODE>makeindex</CODE>) and the usage of -cross-references into a file, which has the extension `<CODE>.sta</CODE>'. The -<CODE>makeindex4</CODE> program, written in <CODE>perl</CODE>, parses this -statistics-file and generates the above presented indexstyle commands -for you automatically including the required declaration of all -attributes in the whole index and their markup. -<P>Another problem is the automatic detection of cross-references. As -noted above, <CODE>makeindex</CODE> handles cross-references with its -encapsulation mechanism, a scheme which has been dropped in <SF>xindy</SF> -and replaced by a more powerful mechanism. To implement a simple -plug-in mechanism we have extended the syntax of the <CODE>tex2xindy</CODE> -filter to identify encapsulators of the form -<P> -<BLOCKQUOTE><CODE> -<PRE> -\indexentry{...|encap{...}}{...} -</PRE> -</CODE></BLOCKQUOTE> -<P>as a cross-reference, whereas encapsulators of the form -<P> -<BLOCKQUOTE><CODE> -<PRE> -\indexentry{...|encap}{...} -</PRE> -</CODE></BLOCKQUOTE> -<P>are treated as ordinary attributes. This is standard practice -defining cross-references in <CODE>makeindex</CODE>. Thus, <CODE>tex2xindy</CODE> -distinguishes these two forms of encapsulators as opposed to -<CODE>makeindex</CODE> and our plug-in <CODE>makeindex4</CODE> generates the -appropriate definitions of the cross-reference classes as well. -<P> -<P> -<P> -<P> -<HR> -<A HREF="faq-3.html">Next</A> -<A HREF="faq-1.html">Previous</A> -<A HREF="faq.html#toc2">Contents</A> -</BODY> -</HTML> diff --git a/Build/source/utils/xindy-old/doc/faq-3.html b/Build/source/utils/xindy-old/doc/faq-3.html deleted file mode 100644 index 12895e8cb29..00000000000 --- a/Build/source/utils/xindy-old/doc/faq-3.html +++ /dev/null @@ -1,83 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN"> -<HTML> -<HEAD> - <META NAME="GENERATOR" CONTENT="SGML-Tools 1.0.9"> - <TITLE>XINDY FAQ: xindy and LaTeX</TITLE> - <LINK HREF="faq-4.html" REL=next> - <LINK HREF="faq-2.html" REL=previous> - <LINK HREF="faq.html#toc3" REL=contents> -</HEAD> -<BODY> -<A HREF="faq-4.html">Next</A> -<A HREF="faq-2.html">Previous</A> -<A HREF="faq.html#toc3">Contents</A> -<HR> -<H2><A NAME="s3">3. <SF>xindy</SF> and LaTeX</A></H2> - -<H2><A NAME="ss3.1">3.1 What is <CODE>tex2xindy</CODE>?</A> -</H2> - -<P> -<P><CODE>tex2xindy</CODE> is a filter that parses `<CODE>.idx</CODE>' or similar files -and converts the <CODE>\indexentry</CODE> macros into a form readable by -<SF>xindy</SF>. -<P>The parser of <CODE>makeindex</CODE> can be configured to recognize different -quoting characters, etc. (see the man-page for <CODE>makeindex</CODE>, section -<EM>input style specifiers</EM> for further details). We have tried to -extract the parser from <CODE>makeindex</CODE> but due to several probems we -have finally rewritten the parser using <CODE>lex</CODE>. Scanners written -with <CODE>lex</CODE> are usually fixed to a specific character set used in -the regular expressions. Our parser, <CODE>tex2xindy</CODE> is therefore not -configurable. If one uses a different configuration of the -<CODE>makeindex</CODE> input style specifiers, one can change the source -(<CODE>tex2xindy.l</CODE>) to generate a completely new parser. From our -personal experience we have rarely used more than two different -parsers in practice so we have written <CODE>tex2xindy</CODE> in a form that -is easily maintainable. The input specifiers are stored symbolically -in the source. The definiton section looks like this: -<P> -<BLOCKQUOTE><CODE> -<PRE> -KEYWORD \\indexentry -ENCAP \| -ACTUAL @ -ESCAPE \\ -LEVEL ! -QUOTE \" -ROPEN \( -RCLOSE \) -ARGOPEN \{ -ARGCLOSE \} -</PRE> -</CODE></BLOCKQUOTE> -<P>These definitions are essentially the input style specifiers as can be -found in the man-page of <CODE>makeindex</CODE>. Changing this section -according to your needs and recompiling <CODE>tex2xindy</CODE> should be an -easy task. Maybe we will include more pre-defined parsers in future -releases if necessary. -<P> -<P> -<P> -<H2><A NAME="ss3.2">3.2 What LaTeX-package should I use in conjunction with xindy?</A> -</H2> - -<P> -<P>We strongly recommend using the LaTeX2e-package <CODE>index</CODE> written -by David M. Jones, which is available at CTAN. It supports multiple -indexes as well as several shortcuts to easily index terms in a -document. Multiple indexes support the generation of several indexes -for one document. For instance, one can make an author or command -index in addition to a global index. -<P>Another option is to use the <CODE>xindy.sty</CODE> from Andreas Schlechte -that comes with the <SF>xindy</SF> distribution. Take a look at the -<CODE>contrib</CODE> directory that should contain a version. -<P> -<P> -<P> -<P> -<HR> -<A HREF="faq-4.html">Next</A> -<A HREF="faq-2.html">Previous</A> -<A HREF="faq.html#toc3">Contents</A> -</BODY> -</HTML> diff --git a/Build/source/utils/xindy-old/doc/faq-4.html b/Build/source/utils/xindy-old/doc/faq-4.html deleted file mode 100644 index 81052562f1d..00000000000 --- a/Build/source/utils/xindy-old/doc/faq-4.html +++ /dev/null @@ -1,668 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN"> -<HTML> -<HEAD> - <META NAME="GENERATOR" CONTENT="SGML-Tools 1.0.9"> - <TITLE>XINDY FAQ: Style Files</TITLE> - <LINK HREF="faq-3.html" REL=previous> - <LINK HREF="faq.html#toc4" REL=contents> -</HEAD> -<BODY> -Next -<A HREF="faq-3.html">Previous</A> -<A HREF="faq.html#toc4">Contents</A> -<HR> -<H2><A NAME="s4">4. Style Files</A></H2> - -<H2><A NAME="ss4.1">4.1 Eventually, I decided to write my first index style. How can I start?</A> -</H2> - -<P> -<P>Congratulations! You have made a good decision, indeed. -<P>For a first impression, how a style file can be written from scratch -reference the <EM>tutorial</EM> that comes with this distribution. It is -written as a guided step-by-step practicing exercise and you can learn -the basic concepts quite easily. -<P>Afterwards, the best starting point is to make a copy of the template -file that contains all the necessary commands that are needed to make -a <CODE>makeindex</CODE>-like index. You can find it in the subdirectory -<CODE>markup/tex</CODE> of the module library. Starting from this template -you can remove or add commands as necessary. -<P>Additionally, consult the library of predefined <EM>index style -modules</EM> that comes with this distribution. Solutions for most of the -typical problems can be found there, such as a module for doing -case-insensitive sorting rules, or a typical TeX-like markup. Most -of the time is is enough to include some of these modules and add a -few additional commands. -<P>Maybe some of the examples coming with the <EM>test-suite</EM> are good -examples of how unusual index style files can be written. -<P>Thus, there are many ways to learn writing an index style file. But it -is very easy and after some experience you can process indexes your -friends will be jealous of. -<P> -<P> -<H2><A NAME="ss4.2">4.2 How to write my first index style?</A> -</H2> - -<P> -<P>Copy the file <CODE>tex/makeidx.xdy</CODE> from the library to your -local directory. It is documented in in a way that should make it easy -to fill in new commands or remove or modify others. -<P> -<P> -<P> -<H2><A NAME="ss4.3">4.3 How works the actual key feature of <CODE>makeindex</CODE> with <SF>xindy</SF>?</A> -</H2> - -<P> -<P>The treatment of the actual key (usually denoted with <CODE>@</CODE>, the -at-sign) has changed with <SF>xindy</SF>. Specifying index entries with a -specific markup can be done in <CODE>makeindex</CODE> with the actual key. The -<CODE>makeindex-3</CODE> system and <SF>xindy</SF> offer the <EM>merge-</EM> and -<EM>sort-rules</EM> to transform a key into different representations, -limiting the need to specify an actual key. For example they support a -style of writing -<P> -<BLOCKQUOTE><CODE> -<PRE> -\index{\bf{VIP}} -</PRE> -</CODE></BLOCKQUOTE> -<P>which can be transformed with a rule like -<P> -<BLOCKQUOTE><CODE> -<PRE> -(merge-rule "\bf{\(.*\)}" "\1" :again :bregexp) -</PRE> -</CODE></BLOCKQUOTE> -<P>which removes the macro definition for merging and sorting keywords, -but keeping the original definition for markup purposes. Therefore we -don't need any actual keys for all keywords written in boldface. -<P>The <CODE>makeindex</CODE> behaviour, that the two keywords -<P> -<BLOCKQUOTE><CODE> -<PRE> -\index{VIP} -\index{VIP@\bf{VIP}} -</PRE> -</CODE></BLOCKQUOTE> -<P>are seen as two distinct index entries, can be simulated using the -following definition: -<P> -<BLOCKQUOTE><CODE> -<PRE> -(merge-rule "\bf{\(.*\)}" "\1~e" :again :bregexp) -</PRE> -</CODE></BLOCKQUOTE> -<P>This rule tells <SF>xindy</SF> to remove the boldface macro for merging -and sorting purposes but defines the replacement to include the -special character <CODE>~e</CODE>, which is the last character in the -alphabet (ISO-Latin in our case). This makes <SF>xindy</SF> treat them as -different keywords and positions the boldface keyword right behind the -one without any markup. Thus we receive the following mapping: -<P> -<BLOCKQUOTE><CODE> -<PRE> -Keyword: Merged and sorted as: Appears in the index as: -VIP VIP VIP -\bf{VIP} VIP~e \bf{VIP} -</PRE> -</CODE></BLOCKQUOTE> -<P>With this new style of writing keywords and defining their markup, the -need to explicitly specifying the print key (aka. actual key) has -convinced us to remove the <CODE>makeindex</CODE> way of defining keywords. -<P> -<P> -<P> -<H2><A NAME="ss4.4">4.4 I want to process an index for my native language. What must I do?</A> -</H2> - -<P> -<P>What makes <CODE>makeindex</CODE> hardly usable in non-English speaking -countries is its lack of support of language specific alphabets and -sort orderings. For example, many roman languages such as Italian, -French, Portuguese or Spanish contain accented letters such as -À, Á, ñ. Other languages from northern Europe -have letters like Ä, Ø, æ or ß which often -can't even be processed by many index processors let alone sorting -them correctly into an index. -<P>Two problems must be solved when processing indexes with a new -languages: -<P> -<OL> -<LI> The <EM>sort ordering</EM> of the indexed terms must be specified -in an appropriate manner. This problem can be solved using the -so-called <EM>keyword mappings</EM>. -</LI> -<LI> The <EM>letter groups</EM> that partition the indexed terms into -separate sections must be specified.</LI> -</OL> -<P>The <SF>xindy</SF> system can be configured to process these alphabets by -defining <EM>sort</EM> and <EM>merge rules</EM> that allow expressing language -specific rules. -<P>The keyword mappings are as follows: The <EM>merge key</EM> is generated -from the <EM>main key</EM> with the so called <EM>merge mapping</EM>. The -merge mapping can be specified with the command <CODE>merge-rule</CODE>. The -<EM>sort key</EM> is derived from the merge key using the <EM>sort -mapping</EM> specified with the <CODE>sort-rule</CODE> command. The following -scheme shows this mapping process: -<P> -<FIGURE> -<EPS FILE="mappings.eps"> -<IMG SRC="mappings.gif"> -</FIGURE> -<P> -<P>The index style commands accomplishing this task are -<CODE>sort-rule</CODE> and <CODE>merge-rule</CODE>. One example of such a rule would -be -<P> -<BLOCKQUOTE><CODE> -<PRE> -(sort-rule "ä" "ae") -</PRE> -</CODE></BLOCKQUOTE> -<P>defining that a word containing the umlaut-a will be sorted as if it -contained the letters <CODE>ae</CODE> instead. This is one form of how the -umlaut-a (ä) is sorted into german indexes. With an appropriate set of -rules on can express the complete rules of a specific language. -<P>An example of how an appropriate mapping for some of the Roman -languages could look like is: -<P> -<BLOCKQUOTE><CODE> -<PRE> -(sort-rule "à" "a") -(sort-rule "á" "a") -(sort-rule "ã" "a") -(sort-rule "è" "e") -(sort-rule "é" "e") -(sort-rule "ç" "c") -</PRE> -</CODE></BLOCKQUOTE> -<P>This makes the accented letters be sorted as their unaccented -counterparts, yielding the desired sort ordering. -<P>Sometimes it is necessary to specify keyword mappings that tell the -system to put something <EM>behind</EM> something else. For instance, we'd -like to map the character <EM>ö</EM> behind the letter <EM>o</EM>. No problem -if you use the special characters <CODE>~b</CODE> and <CODE>~e</CODE> which -are called the <EM>beginning</EM> and <EM>ending</EM> characters. The first -letter lexicographically precedes all other letters whereas the latter -one comes after all others. Our mapping problem can now be specified -as follows. -<P> -<BLOCKQUOTE><CODE> -<PRE> -(sort-rule "ö" "o~e") -</PRE> -</CODE></BLOCKQUOTE> -<P>Now the <EM>ö</EM> is directly positioned after the <EM>o</EM> but before -<EM>p</EM>. -<P> -<P>See the manual for a detailed description of this feature. -Also be informed that the keyword mappings can be specified with -regular expressions. Rules of the form -<P> -<BLOCKQUOTE><CODE> -<PRE> -(merge-rule "[-$()]" "") -</PRE> -</CODE></BLOCKQUOTE> -<P>are possible. This on removes all letters of the defined letter class. -Regular expression substitutions are possible as well. Refer to the -manual for an exact description. -<P> -<P> -<P> -<H2><A NAME="ss4.5">4.5 In my index the capitalized words appear after the lowercase words. Why?</A> -</H2> - -<P> -<P>The default sort ordering sorts letters according to their ordinal -number in the ISO Latin alphabet. As a consequence the lowercase -letters appear before the uppercase letters. To sort them -case-insensitively use the command -<P> -<BLOCKQUOTE><CODE> -<PRE> -(require "lang/latin/caseisrt.xdy") -</PRE> -</CODE></BLOCKQUOTE> -<P>This module defines the appropriate sort rules for the letters `A-Z' -for latin-based alphabets. If your language has more letters simply -add the missing ones into your style file. Have a look at the module -to see how to the sort rules are defined. -<P> -<P> -<P> -<H2><A NAME="ss4.6">4.6 In my index there are no letter groups, yet!</A> -</H2> - -<P> -<P>Letter groups for latin based alphabets can be defined with the command -<P> -<BLOCKQUOTE><CODE> -<PRE> -(require "lang/latin/letgroup.xdy") -</PRE> -</CODE></BLOCKQUOTE> -<P>If your language needs additional letter groups you can insert them -into the previously defined letter group with inserting definitions of -the following form: -<P> -<BLOCKQUOTE><CODE> -<PRE> -(define-letter-group "ly" :after "l" :before "m") -(define-letter-group "ny" :after "n" :before "o") -</PRE> -</CODE></BLOCKQUOTE> -<P>This adds two more letter groups to the latin alphabet. Group <EM>ly</EM> -is inserted between <EM>l</EM> and <EM>m</EM>, and <EM>ny</EM> is inserted between -<EM>n</EM> and <EM>o</EM>. This is how two additional letters of the Hungarian -alphabet can be inserted. -<P> -<P> -<P> -<H2><A NAME="ss4.7">4.7 How can I get rid of any formatting information in the keyword?</A> -</H2> - -<P> -<P>Assume you have index entries containing arbitrary formatting -information. For example you write your index entries in TeX in the -following form: -<P> -<BLOCKQUOTE><CODE> -<PRE> -\index{\bf{In boldface please}} -</PRE> -</CODE></BLOCKQUOTE> -<P>To avoid specifying for each index entry the print key separately as -can be done with the following command -<P> -<BLOCKQUOTE><CODE> -<PRE> -\index{In boldface please@\bf{In boldface please}} -</PRE> -</CODE></BLOCKQUOTE> -<P>you can instead define a rule doing this task for you: -<P> -<BLOCKQUOTE><CODE> -<PRE> -(merge-rule "\\bf *{(.*)}" "\1" :eregexp :again) -</PRE> -</CODE></BLOCKQUOTE> -<P>This extended regular expression matches all strings that are -surrounded by this formatting command and in the <EM>merge phase</EM> the -formatting command is simply stripped off. Thus, you don't need to -write an explicit print key anymore. -<P>If for some reason the same word appears more than once in the index, -each time having another markup tag as in the following example -<P> -<BLOCKQUOTE><CODE> -<PRE> -index -{\tt index} -</PRE> -</CODE></BLOCKQUOTE> -<P>you must be warned that a rule like -<P> -<BLOCKQUOTE><CODE> -<PRE> -(merge-rule "{\\tt *(.*)}" "\1" :eregexp :again) -</PRE> -</CODE></BLOCKQUOTE> -<P>is probably not correct. In this case the above strings are both -mapped into the string <CODE>index</CODE> thus joining their location -references into one index entry. This happens because the result of -the merge mapping is used as the equality citerium which views both -keywords as equal. To avoid this you should specify instead -<P> -<BLOCKQUOTE><CODE> -<PRE> -(merge-rule "{\\tt *(.*)}" "\1~e" :eregexp :again) -</PRE> -</CODE></BLOCKQUOTE> -<P>With the additional meta character <CODE>~e</CODE> the substitution of the -second key word is placed <EM>after</EM> the first one making them -different index entries. If the second keyword should appear first, -use <CODE>~b</CODE> instead. -<P> -<P> -<P> -<P> -<H2><A NAME="ss4.8">4.8 In my index the word <EM>-foo</EM> appears before <EM>bar</EM>. What must I do?</A> -</H2> - -<P> -<P>Especially for hierarchical indexes sometimes the result is not as -expected due to special characters appearing in the keyword. In the -following example the word `card' should appear before `-eyed' since -the hyphen should not count as an ordinary character by means of -sorting. -<P> -<BLOCKQUOTE><CODE> -<PRE> - green - -eyed 12 - card 15 -</PRE> -</CODE></BLOCKQUOTE> -<P>This is especially problematic if the list of words on the second -level is very long. To make the hyphen be simply ignored during the -sorting process you should specify the following command in the index -style: -<P> -<BLOCKQUOTE><CODE> -<PRE> - (sort-rule "-" "") -</PRE> -</CODE></BLOCKQUOTE> -<P>This makes `-eyed' be sorted as `eyed' thus making it appear -<EM>after</EM> `card' as desired. -<P> -<P> -<P> -<P> -<H2><A NAME="ss4.9">4.9 I want to use letter ordering instead of word ordering in my index.</A> -</H2> - -<P> -<P>According to the <EM>Chicago Manual of Style</EM> there exist two -different schemes of sorting word lists. In <EM>word ordering</EM> -a blank precedes any letter in the alphabet, whereas in <EM>letter -ordering</EM> it does not count at all. The following example borrowed -from the <CODE>makeindex</CODE> man-page illustrates the difference: -<P> -<BLOCKQUOTE><CODE> -<PRE> - Word Order: Letter Order: - sea lion seal - seal sea lion -</PRE> -</CODE></BLOCKQUOTE> -<P>By default, <SF>xindy</SF> uses word ordering. To use letter ordering -include the appropriate module with the following command: -<P> -<BLOCKQUOTE><CODE> -<PRE> -(require "ord/letorder.xdy") -</PRE> -</CODE></BLOCKQUOTE> -<P>It actually defines the following command: -<P> -<BLOCKQUOTE><CODE> -<PRE> -(sort-rule " " "") -</PRE> -</CODE></BLOCKQUOTE> -<P>This simply removes all blanks from the keyword resulting in the -desired behaviour. -<P> -<P> -<P> -<P> -<H2><A NAME="ss4.10">4.10 My document does not have page numbers, but a different scheme. What must I do?</A> -</H2> - -<P> -<P>The ability to deal with user-definable location structures is one of -the most important new features of <SF>xindy</SF>. Many documents have a -document structure that is not based on page numbers. Typical examples -are manuals or appendices that come with a -<EM>chapter/page-per-chapter</EM> numbering scheme, URLs, Bible verses, -etc. One can even imagine the Greek alphabet as possibly appearing in -a location reference. In our analysis we have found many interesting -examples of location references that made us to develop the concept of -<EM>location classes</EM>. -<P>A location class is defined by a sequence of alphabets. An alphabet -can be the set of arabic numbers (0, 1, 2, ...) or the roman numerals -(i, ii, iii, ...). These are built-in alphabets in <SF>xindy</SF>. -Addtionally, one can define more alphabets in the index style with a -command like -<P> -<PRE> - (define-alphabet "weekdays" - ("mon" "tue" "wed" "thu" "fri" "sat" "sun")) -</PRE> -<P>Based on alphabets one can now compose a location class as follows: -<P> -<PRE> - (define-location-class "weekday-hours" - ("weekday" :sep ":" "arabic-numbers")) -</PRE> -<P>This class description indicates that all location refernces matching -this template are viewed as correct instances of this class. Here -<CODE>:sep</CODE> makes the dot serving as a <EM>separation string</EM> separation -the alphabets from each other. Example instances of this class are: -<P> -<PRE> -mon:23, thu:45, sun:17 -</PRE> -<P>For more detailed information consult the description of the command -<CODE>define-location-class</CODE> in the reference manual. -<P> -<P> -<P> -<H2><A NAME="ss4.11">4.11 I don't want to have ranges in my index. What can I do?</A> -</H2> - -<P> -<P>By default, <SF>xindy</SF> joins three successive location references into a -<EM>range</EM>. Ranges are used as an abbrevation for a long sequence of -location references. For exmaple the sequence -<P> -<PRE> -12, 13, 14, 15, 16 -</PRE> -<P>would be shorter represented as -<P> -<PRE> -12-16 -</PRE> -<P>If you don't want to have ranges, simply define your location class in -the form -<P> -<PRE> - (define-location-class ... :min-range-length none) -</PRE> -<P>The argument <CODE>:min-range-length none</CODE> avoids forming of ranges. -Arbitrary numbers instead of <CODE>none</CODE> define the minimum length of a -sequence of location references that are needed to form a range. -<SF>xindy</SF>s default value is 2. -<P> -<P> -<P> -<H2><A NAME="ss4.12">4.12 I want to markup ranges of different length differently. How do I accomplish this?</A> -</H2> - -<P> -<P>A common way of tagging ranges is as follows: a range of length 1 is -printed with the starting page number and the suffix `f.', those of -length 2 with suffix `ff.', and all others in the form `<EM>X--Y</EM>'. -<P>Assume we want to do this for the location class <EM>pagenums</EM> we can -specify the markup as follows: -<P> -<BLOCKQUOTE><CODE> -<PRE> -(markup-range :class "pagenums" :close "f." :length 1 :ignore-end) -(markup-range :class "pagenums" :close "ff." :length 2 :ignore-end) -(markup-range :class "pagenums" :sep "--") -</PRE> -</CODE></BLOCKQUOTE> -<P>The first command indicates that a range <EM>(X,Y)</EM> of length 1 should -be printed in the form <EM>Xf.</EM>, a range of length 2 as <EM>Xff.</EM> and -all others in the form <EM>X--Y</EM>. The switch <CODE>:ignore-end</CODE> causes -the end of range location reference Y to be suppressed in the -resulting output. -<P> -<P> -<H2><A NAME="ss4.13">4.13 I need to suppress some of the markup tags. How can I do this?</A> -</H2> - -<P>Sometimes it is necessary to hide some of the parts of the index. If -you have a text formatter that allows comments or macros that possibly -expand to nothing, just define appropriate markup that makes things -invisible to the formatter. For example, with TeX you can define a -macro like this -<P> -<BLOCKQUOTE><CODE> -<PRE> -\def\ignore#1{} -</PRE> -</CODE></BLOCKQUOTE> -<P>If you additionally define markup like this -<P> -<BLOCKQUOTE><CODE> -<PRE> -(markup-index :open "\ignore{" :close "}") -</PRE> -</CODE></BLOCKQUOTE> -<P>you can throw away the complete index if you like, which would be a -real pity! -<P> -<P> -<P> -<H2><A NAME="ss4.14">4.14 Whats it all about those cross references?</A> -</H2> - -<P> -<P>Cross references are references pointing to an item in the index -itself. Typical examples are: -<P> -<BLOCKQUOTE><CODE> -foo-bar <EM>see</EM> baz -</CODE></BLOCKQUOTE> -<P>With <CODE>makeindex</CODE> cross references could be specified with the -encapsulation mechanism. This has completely been removed in <SF>xindy</SF> -and we have made cross references real first-class objects. -<P>In <SF>xindy</SF> one can declare different cross reference classes, whose -purpose is (a) to make all instances of a certain class appear next to -each other, and (b) to specify appropriate markup with them. -<P>@begin-comment -One very interesting feature is the ability to <EM>check</EM> the validity -of cross-references. -@end-comment -<P><CODE>tex2xindy</CODE> recognises all index entries of the form -<P> -<PRE> - \index{...|\macro{where}} -</PRE> -<P>as cross references. Here <CODE>macro</CODE> stands for an arbitrary macro -name and <CODE>where</CODE> is interpreted as the target keyword of the cross -references. -<P>If you want to use these cross references with <SF>xindy</SF>; add the -following line to your style file. -<P> -<PRE> - (define-crossref-class "macro") -</PRE> -<P>Additionally, you can assign specific markup to cross references using -the <CODE>markup-crossref</CODE>-commands. -<P> -<P> -<P> -<H2><A NAME="ss4.15">4.15 The keyword mappings don't work as expected!</A> -</H2> - -<P> -<P>Sometimes the keyword mappings don't work as expected. Especially in -cases with several regular expressions one might get confused about -what rule matches exactly when. We have incorporated a detailed -logging mechanism that lets one step by step follow the rules that -accomplish the keyword mapping. -<P>When running <SF>xindy</SF> you can turn on this feature with the command -line option `<CODE>-L</CODE>'. This option followed by one of the numbers 1, -2, or 3 turns on the appropriate debugging level. Turning on level 2 -or 3 and specifying a log-file with the command line option `<CODE>-l</CODE>' -a trace of the mappings is recorded in the log-file. A sample output -looks like the following: -<P> -<BLOCKQUOTE><CODE> -<PRE> -Mappings: (add (merge-rule :eregexp `^\\bf{(.*)}' `\1' :again)). -Mappings: (add (merge-rule :eregexp `^\\"([AEOUaeou])' `\1')). - ... -Mappings: (compare `\"A\"a' :eregexp `^\\bf{(.*)}') -Mappings: (compare `\"A\"a' :eregexp `^\\"([AEOUaeou])') match! -Mappings: (compare `\"a' :eregexp `^\\bf{(.*)}') -Mappings: (compare `\"a' :eregexp `^\\"([AEOUaeou])') match! -Mappings: (merge-mapping `\"A\"a') -> `Aa'. -</PRE> -</CODE></BLOCKQUOTE> -<P>This trace shows that initially two regular expression mappings have -been added to the rule set. The second section shows how the keyword -`<CODE>\"A\"a</CODE>' is compared to these rules and substitutions are -applied as matches are found. In the last line the result of the -keyword mapping is reported. -<P> -<P> -<P> -<H2><A NAME="ss4.16">4.16 I'm totally confused by the markup scheme!</A> -</H2> - -<P> -<P>A very important feature is the ability to <EM>trace</EM> all markup tags -<SF>xindy</SF> emits in the markup phase. Simply use the command line -switch <CODE>-t</CODE> or insert the command -<P> -<BLOCKQUOTE><CODE> -<PRE> -(markup-trace :on) -</PRE> -</CODE></BLOCKQUOTE> -<P>into the index style. This informs <SF>xindy</SF> to emit additional -pseudo markup that can be used to understand and debug the -markup phase. An example output might look like the following: -<P> -<BLOCKQUOTE><CODE> -<PRE> -<INDEX:OPEN> - <LETTER-GROUP-LIST:OPEN> - <LETTER-GROUP:OPEN ["a"]> - <INDEXENTRY-LIST:OPEN [0]> - <INDEXENTRY:OPEN [0]> - <KEYWORD-LIST:OPEN [0]> - <KEYWORD:OPEN [0]> - ... -</PRE> -</CODE></BLOCKQUOTE> -<P>The symbolic tags directly lead one to the command that is responsible -for the definition of that markup tag. For example, the tag -<CODE>LETTER-GROUP-LIST:OPEN</CODE> indicates that the command -<CODE>markup-letter-group-list</CODE> is responsible for replacing this -symbolic tag by a real one. -Give it a try if you find yourself confused by your own markup -specification. -<P> -<P> -<P> -<H2><A NAME="ss4.17">4.17 What editor should I use when writing xindy style files?</A> -</H2> - -<P> -<P>Use <CODE>Emacs</CODE> or <CODE>XEmacs</CODE>. Turn on the Lisp-mode with -<P> -<BLOCKQUOTE><CODE> -<PRE> -M-x lisp-mode -</PRE> -</CODE></BLOCKQUOTE> -<P>and you can properly indent commands using <CODE>M-q</CODE>. To enter this -mode automatically add the following lines to the end of the style -file: -<P> -<BLOCKQUOTE><CODE> -<PRE> -^L -;; Local Variables: -;; mode: lisp -;; End: -</PRE> -</CODE></BLOCKQUOTE> -<P>The <CODE>^L</CODE> (Control-L) can be entered with <CODE>C-q C-l</CODE>. -<P> -<P> -<P> -<HR> -Next -<A HREF="faq-3.html">Previous</A> -<A HREF="faq.html#toc4">Contents</A> -</BODY> -</HTML> diff --git a/Build/source/utils/xindy-old/doc/faq.html b/Build/source/utils/xindy-old/doc/faq.html deleted file mode 100644 index d049b766693..00000000000 --- a/Build/source/utils/xindy-old/doc/faq.html +++ /dev/null @@ -1,90 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN"> -<HTML> -<HEAD> - <META NAME="GENERATOR" CONTENT="SGML-Tools 1.0.9"> - <TITLE>XINDY FAQ</TITLE> - <LINK HREF="faq-1.html" REL=next> - - -</HEAD> -<BODY> -<A HREF="faq-1.html">Next</A> -Previous -Contents -<HR> -<H1>XINDY FAQ</H1> - -<H2>Or: <SF>xindy</SF> by Topic</H2> -<H2>Roger Kehr</H2> -<H3>Computer Science Department, Technical University of Darmstadt</H3> - and -<H2>Joachim Schrod</H2> -<H3>Joachim Schrod Net & Publication Consultance GmbH</H3> -$Revision: 1.2 $, $Date: 2004/05/24 21:43:16 $, for xindy version 2.2 -<P><HR> -<EM> The <SF>xindy</SF> FAQ presents answers to questions that are not -adequately covered in other parts of the documentation, or are hard to -find. The FAQ has been constructed from the <EM><SF>xindy</SF> by Topic</EM> -manual. The most up-to-date version of this FAQ can be obtained from -the <SF>xindy</SF> homepage at -<A HREF="http://www.xindy.org/doc/faq.html">http://www.xindy.org/doc/faq.html</A>. -<p> -While the content of this document is still valid, it has not been -updated in years and doesn't describe new developments. In particular, -it doesn't mention the many languages that are supported by Thomas -Henlich's <EM>make-rules</EM> system, and also doesn't know anything about -the new commands that got introduced with the "LaTeX Companion -Release". So, caveat. We don't want to throw out the document, though, -since it still contains lots of useful information that's not -available elsewhere.</EM> -<HR> -<P> -<H2><A NAME="toc1">1.</A> <A HREF="faq-1.html">General Questions</A></H2> - -<UL> -<LI><A HREF="faq-1.html#ss1.1">1.1 Why a completely new indexing tool? <CODE>makeindex</CODE> works fine!</A> -<LI><A HREF="faq-1.html#ss1.2">1.2 I'm an old <CODE>makeindex</CODE> wizard. What does <SF>xindy</SF> offer that <CODE>makeindex</CODE> doesn't?</A> -</UL> -<P> -<H2><A NAME="toc2">2.</A> <A HREF="faq-2.html"><SF>xindy</SF> Usage</A></H2> - -<UL> -<LI><A HREF="faq-2.html#ss2.1">2.1 I don't want to write style files. How can I proceed?</A> -<LI><A HREF="faq-2.html#ss2.2">2.2 How do I use <CODE>makeindex4</CODE>?</A> -<LI><A HREF="faq-2.html#ss2.3">2.3 How works <CODE>makeindex4</CODE>?</A> -</UL> -<P> -<H2><A NAME="toc3">3.</A> <A HREF="faq-3.html"><SF>xindy</SF> and LaTeX</A></H2> - -<UL> -<LI><A HREF="faq-3.html#ss3.1">3.1 What is <CODE>tex2xindy</CODE>?</A> -<LI><A HREF="faq-3.html#ss3.2">3.2 What LaTeX-package should I use in conjunction with xindy?</A> -</UL> -<P> -<H2><A NAME="toc4">4.</A> <A HREF="faq-4.html">Style Files</A></H2> - -<UL> -<LI><A HREF="faq-4.html#ss4.1">4.1 Eventually, I decided to write my first index style. How can I start?</A> -<LI><A HREF="faq-4.html#ss4.2">4.2 How to write my first index style?</A> -<LI><A HREF="faq-4.html#ss4.3">4.3 How works the actual key feature of <CODE>makeindex</CODE> with <SF>xindy</SF>?</A> -<LI><A HREF="faq-4.html#ss4.4">4.4 I want to process an index for my native language. What must I do?</A> -<LI><A HREF="faq-4.html#ss4.5">4.5 In my index the capitalized words appear after the lowercase words. Why?</A> -<LI><A HREF="faq-4.html#ss4.6">4.6 In my index there are no letter groups, yet!</A> -<LI><A HREF="faq-4.html#ss4.7">4.7 How can I get rid of any formatting information in the keyword?</A> -<LI><A HREF="faq-4.html#ss4.8">4.8 In my index the word <EM>-foo</EM> appears before <EM>bar</EM>. What must I do?</A> -<LI><A HREF="faq-4.html#ss4.9">4.9 I want to use letter ordering instead of word ordering in my index.</A> -<LI><A HREF="faq-4.html#ss4.10">4.10 My document does not have page numbers, but a different scheme. What must I do?</A> -<LI><A HREF="faq-4.html#ss4.11">4.11 I don't want to have ranges in my index. What can I do?</A> -<LI><A HREF="faq-4.html#ss4.12">4.12 I want to markup ranges of different length differently. How do I accomplish this?</A> -<LI><A HREF="faq-4.html#ss4.13">4.13 I need to suppress some of the markup tags. How can I do this?</A> -<LI><A HREF="faq-4.html#ss4.14">4.14 Whats it all about those cross references?</A> -<LI><A HREF="faq-4.html#ss4.15">4.15 The keyword mappings don't work as expected!</A> -<LI><A HREF="faq-4.html#ss4.16">4.16 I'm totally confused by the markup scheme!</A> -<LI><A HREF="faq-4.html#ss4.17">4.17 What editor should I use when writing xindy style files?</A> -</UL> -<HR> -<A HREF="faq-1.html">Next</A> -Previous -Contents -</BODY> -</HTML> diff --git a/Build/source/utils/xindy-old/doc/index.gif b/Build/source/utils/xindy-old/doc/index.gif Binary files differdeleted file mode 100644 index 74f581c4b85..00000000000 --- a/Build/source/utils/xindy-old/doc/index.gif +++ /dev/null diff --git a/Build/source/utils/xindy-old/doc/makeindex4.pdf b/Build/source/utils/xindy-old/doc/makeindex4.pdf Binary files differdeleted file mode 100644 index de8a08309e1..00000000000 --- a/Build/source/utils/xindy-old/doc/makeindex4.pdf +++ /dev/null diff --git a/Build/source/utils/xindy-old/doc/manual-1.html b/Build/source/utils/xindy-old/doc/manual-1.html deleted file mode 100644 index 40fc1db4349..00000000000 --- a/Build/source/utils/xindy-old/doc/manual-1.html +++ /dev/null @@ -1,42 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN"> -<HTML> -<HEAD> - <META NAME="GENERATOR" CONTENT="SGML-Tools 1.0.9"> - <TITLE>xindy Manual: About this Manual</TITLE> - <LINK HREF="manual-2.html" REL=next> - - <LINK HREF="manual.html#toc1" REL=contents> -</HEAD> -<BODY> -<A HREF="manual-2.html">Next</A> -Previous -<A HREF="manual.html#toc1">Contents</A> -<HR> -<H2><A NAME="s1">1. About this Manual</A></H2> - -<P>We assume that the reader is already familiar with the task of an -index processor and has basic experience in using a markup-based -document preparation systems such as TeX/LaTeX [1, 2], -the roff-family, or SGML-based systems (e.g. its instance HTML). -<P>This document is structured as follows. The second part gives an -overview on the index model that is used by our system and we define -general concepts and terms. The third part contains a list of all -index style commands, their syntax, and a description of their -purpose. The reader should at least have read the first part of the -manual to understand the basic terminology to be able to use the -command reference. The fourth -part describes the different processing phases the system runs -through. -<P>Invocation of <SF>xindy</SF> is not explained here. Please refer to the -manual pages of the commands <CODE>xindy</CODE>, <CODE>texindy</CODE>, -<CODE>makeindex4</CODE>, and to the 2nd edition of the LaTeX Companion. The -<SF>xindy</SF> Web Site has more documentation, too. -<P> -<P> -<P> -<HR> -<A HREF="manual-2.html">Next</A> -Previous -<A HREF="manual.html#toc1">Contents</A> -</BODY> -</HTML> diff --git a/Build/source/utils/xindy-old/doc/manual-2.html b/Build/source/utils/xindy-old/doc/manual-2.html deleted file mode 100644 index c3a7a87be77..00000000000 --- a/Build/source/utils/xindy-old/doc/manual-2.html +++ /dev/null @@ -1,302 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN"> -<HTML> -<HEAD> - <META NAME="GENERATOR" CONTENT="SGML-Tools 1.0.9"> - <TITLE>xindy Manual: How the Index Processor Works</TITLE> - <LINK HREF="manual-3.html" REL=next> - <LINK HREF="manual-1.html" REL=previous> - <LINK HREF="manual.html#toc2" REL=contents> -</HEAD> -<BODY> -<A HREF="manual-3.html">Next</A> -<A HREF="manual-1.html">Previous</A> -<A HREF="manual.html#toc2">Contents</A> -<HR> -<H2><A NAME="how-works"></A> <A NAME="s2">2. How the Index Processor Works</A></H2> - -<P> -<P> -<H2><A NAME="ss2.1">2.1 Data Flow</A> -</H2> - -<P>Usually document preparation systems produce some form data that -describe the <EM>index entries</EM> and the <EM>locations</EM> they point to. -This data is called the <EM>raw index</EM> since it consists of raw data -which contains structured information about the entries of the index. -The raw index is fed into the index processor and is processed -according to a specification called the <EM>index style</EM>. This is a -user-definable description how the index is to be processed, what -sort rules for the keywords should be used, which kind of locations -may appear, and finally, what tags should be emitted when writing the -index into the output file. The result is sometimes fed back into the -document preparation system, as it is in the case of TeX, or used -otherwise. The following figure illustrates this embedding into the -document preparation process. -<P> -<FIGURE> -<EPS FILE="dataflow.eps"> -<IMG SRC="dataflow.gif"> -</FIGURE> -<P>The <SF>xindy</SF> system is oriented on book-like indexes in a form that -is described later in detail. The format of the input data is fixed -and a small tool that converts some system dependent raw index in a -form suitable for <SF>xindy</SF> should not be a big hurdle. The user is -normally not involved in the correct format suitable for <SF>xindy</SF> -and some tools will make this work invisible to him. -<P>In contrast, the output of the <SF>xindy</SF> system is highly -configurable and can produce a variety of different markups. -Additionally, the way <SF>xindy</SF> processes the index data can be -parametrized and controlled in many ways and gives the user a powerful -framework for describing complex indexes. The user can tell <SF>xindy</SF> -how it should produce an output according to his wishes or simply use -some of the predefined styles that come with the distribution. -<P> -<P> -<P> -<P> -<H2><A NAME="general-concepts"></A> <A NAME="ss2.2">2.2 General Concepts and Terms</A> -</H2> - -<P>In the following sections we introduce some terms that are necessary -to understand the way <SF>xindy</SF> works. -<P>The development of <SF>xindy</SF> started with the devlopment of a model -of a <EM>book-like</EM> index. This rather vague term will now be fleshed -out by giving a semi-formal description of the model. If the structure -of an index conforms to this model it can be processed by <SF>xindy</SF>. -We first present a diagram that describes the structure of a processed -index. It is a hierarchical recursive data structure which we will -describe now. -<P> -<FIGURE> -<EPS FILE="index.eps"> -<IMG SRC="index.gif"> -</FIGURE> -<P>Boxed objects contain elements from the raw index such as the keywords -or the location reference layers. We start from the root of the -diagram and explain the different elements. -<P> -<P> -<P> -<DL> -<P> -<DT><B>index</B><DD><P>An index consists of a list of <SF>letter-groups</SF>. -<P> -<P> -<A NAME="def letter-group"></A> <DT><B>letter-group</B><DD><P>The letter groups serve as containers for -<SF>indexentries</SF>. The letter groups are intended to group all -index entries sharing a common <SF>keyword</SF> prefix, allowing the -assignment of a specific markup for each group. For example, indexes -are often organized in a way that new index entries beginning with a -new letter are separated by a specific markup. The following example -illustrates this style. -<P> -<PRE> - B - bread 25, 27 - butter 26 - - M - marmalade 19 - milk 21 -</PRE> -<P>Here we have two letter groups for the letters `B' and `M' because the -keywords `bread' and `butter' share the same prefix `b' and -`marmalade' and `milk' share the prefix `m'. <SF>xindy</SF> can be advised -to define arbitrary letter groups with a particular markup for each of -them. See command <CODE>define-letter-group</CODE> for further details. -<P> -<P> -<DT><B>indexentry</B><DD><P>An index entry consists of three components: the -<SF>keyword</SF> and optionally the list of <SF>location-class-groups</SF> and -the sub-<SF>indexentries</SF>. An example: -<P> -<PRE> - bread 25-30 - brown 26 - white 27 -</PRE> -<P>This index entry consists of the keyword `bread', the -location class list `25-30' and the sub-entries `brown 26' and `white -27'. The sub-entries themselves are complete index entries as well, -forming a recursive data structure. -<P> -<P> -<DT><B>keyword</B><DD><P>The keyword is the identifier of an index entry. It -consists of a list of strings being the <EM>key</EM> if the index entry. In -our model the keyword constists of a list of strings, since indexes -are often organized hierarchically with different layers. In the -example -<P> -<PRE> - bread 25-30 - bread, brown 26 - bread, white 27 -</PRE> -<P>we have keywords `bread', `bread, brown' and `bread, white'. -<P>A keyword is actually separated into four different keys. The -<SF>main-key</SF> is the key that is specified from the author who indexes -a document. The <SF>merge-key</SF> is derived from the main key with the -so-called <EM>merge mapping</EM>. This mapping is accomplished with a set -of rewrite rules. The <SF>sort-key</SF> is derived from the merge key with -another set of rewrite rules called the <EM>sort mapping</EM>. The -<SF>print-key</SF> can be specified by the user explicitely or, if it is -ommited, equals the main key. The rewrite rules consist of string -substitutions that also include regular expression features. -<P>The following figure describes this: -<P> -<FIGURE> -<EPS FILE="mappings.eps"> -<IMG SRC="mappings.gif"> -</FIGURE> -<P> -<P>The <SF>merge-key</SF> is necessary to define the equality of -index entry keys. See command <CODE>merge-rule</CODE> for further details about -defining the merge mapping. -<P>The <SF>sort-key</SF> is necessary to define a total order on the -keywords. Since we need a scheme that is independent from any specific -character set such as ASCII or ISO-Latin, we must be able to define -completely new alphabets. The index entries are then sorted according -to the ISO-Latin alphabet. See the command <CODE>sort-rule</CODE> for an -explanation how these mapping can be specified. -<P>The <SF>print-key</SF> is used for the final markup and contains the -string that appears in the generated markup. -<P> -<P> -<DT><B>location-class-group</B><DD><P>There exist two kinds of -location class groups namely <SF>location-reference-groups</SF> and -<SF>cross-reference-groups</SF>. -<P> -<DT><B>location-reference-group</B><DD><P>consists of a list of -<SF>attribute-groups</SF>. -<P> -<P> -<DT><B>attribute-groups</B><DD><P>Each <SF>location-reference-group</SF> consists of -a list of <SF>attribute-groups</SF>. Attribute groups are defined by a set -of <SF>attributes</SF>. In the markup phase, all location references are -sorted according to the group number their attributes belong to. -Additionally all location references of a particular attribute group -appear together in the index. -<P>See command <CODE>define-attribute-groups</CODE> for further information about -the handling of attribute-groups. -<P>An attribute group consists of a list of <SF>location-references</SF> -and/or <SF>ranges</SF>. -<P> -<P> -<A NAME="def locref-class"></A> <DT><B>location-reference-class, location-reference, location</B><DD><P>Each -index entry of an index references at least one <SF>location</SF> in the -document. A <SF>location</SF> is a logical or physical part of a document, -such as a single page, a section or subsection, etc. The symbolic name -of a location is called a <SF>location-reference</SF>. The -location reference is always represented as a string (a sequence of -characters). Each location reference is associated a special tag -called <SF>attribute</SF>. The following examples may give you an idea how -location references could look like. -<P> -<BLOCKQUOTE> -<CODE>"25" </CODE> represents a page number. -</BLOCKQUOTE> -<P> -<BLOCKQUOTE> -<CODE>"Chapter-3"</CODE> represents the third chapter of a document. -</BLOCKQUOTE> -<P> -<BLOCKQUOTE> -<CODE>"A-I" </CODE> represents the first page, written in uppercase roman -numerals of the appendix `A', separated by a hyphen. -</BLOCKQUOTE> -<P> -<BLOCKQUOTE> -<CODE>"2.3.4" </CODE> represents the sub-sub-section 2.3.4 of a document. -</BLOCKQUOTE> -<P>As we can see, the location references are often composed -hierarchically of smaller entities, such as numbers or names. All -location references that belong to the same class form a -<SF>location-class</SF>. A location class is composed of <SF>alphabets</SF> -and <SF>separators</SF>. See command <CODE>define-location-class</CODE> for a -description how classes can be defined. -<P> -<P> -<DT><B>alphabet, separator</B><DD><P>As we have seen in the previous section, -location classes consist of alphabets and separators. xindy has the -following built-in set of basic alphabets: -<P> -<BLOCKQUOTE><CODE> -<PRE> -<tag/<tt/arabic-numbers// contains all non-negative numbers beginning -with zero: 0, 1, 2, .... - -<tag/<tt/roman-numerals-uppercase// the roman numerals I, II, III, -(IIII/IV), V, ... It recognizes the old and new roman numeral system. - -<tag/<tt/roman-numerals-lowercase// the same for the lowercase roman -numerals. - -<tag/<tt/ALPHA// the US-ASCII alphabet (uppercase letters). - -<tag/<tt/alpha// the US-ASCII alphabet (lowercase letters). - -<tag/<tt/digits// the digits 0, 1, 2, 3, 4, 5, 6, 7, 8 and 9 in this -order. -</PRE> -</CODE></BLOCKQUOTE> -<P>The user is free to define new alphabets as he wishes. See the -commands <CODE>define-alphabet</CODE> and <CODE>define-enumeration</CODE> for further -details. -<P>A complete location class can be defined by composing alphabets and -separators. The location class of the example <CODE>"A-I"</CODE> can be -defined as follows -<P> -<PRE> - (define-location-class "appendix" - (ALPHA "-" roman-numerals-uppercase)) -</PRE> -<P>This is a list that completely describes all possible instances of -this location class. Other valid members are <CODE>A-II</CODE>, <CODE>B-VI</CODE>, -etc. Location classes are defined with the command -<CODE>define-location-class</CODE>. -<P><SF>xindy</SF> reads the incoming strings representing location references -and tries to match them against a previously defined location class. -There exist no predefined location classes. -<P> -<DT><B>range</B><DD><P>A <SF>range</SF> is a pair of <SF>location-references</SF>. A -sequence of location references following one another is transformed -into an range if the length of the sequence exceeds a certain -user-definable limit. For example, the location references 11, 12, 13 -and 14 may be transformed into the range 11--14. See command -<CODE>define-location-class</CODE> for further details. -<P> -<P> -<DT><B>cross-reference-group</B><DD><P>Container for all -<SF>cross-references</SF> of a particular <SF>cross-reference-class</SF>. -<P> -<P> -<A NAME="def crossref-class"></A> <DT><B>cross-reference-class, cross-reference</B><DD><P>A <SF>cross-reference</SF> is -an unstructured reference. <SF>Cross-reference-classes</SF> are used to -define different classes of cross references. All elements of a -cross reference class appear together in the index. A cross reference -consists of a list of strings. -<P> -<P> -<DT><B>attributes</B><DD><P>Each location reference contains a so-called -<SF>attribute</SF>. Attributes may be used to give a location reference a -different meaning that may influence the processing and markup of this -reference. Sometimes location references pointing to semantically -different locations such as a definition or a usage of a term are -tagged differently. They often appear in <EM>italics</EM> or <B>boldface</B> -indicating this difference. An attribute may now be used to express -this difference. Since <SF>xindy</SF> needs to know the possible -attributes before the index entries are read in, the command -<CODE>define-attributes</CODE> must be used to define a set of attributes and -how they interact. -<P> -</DL> -<P> -<P> -<P> -<P> -<HR> -<A HREF="manual-3.html">Next</A> -<A HREF="manual-1.html">Previous</A> -<A HREF="manual.html#toc2">Contents</A> -</BODY> -</HTML> diff --git a/Build/source/utils/xindy-old/doc/manual-3.html b/Build/source/utils/xindy-old/doc/manual-3.html deleted file mode 100644 index 3520de7f1ea..00000000000 --- a/Build/source/utils/xindy-old/doc/manual-3.html +++ /dev/null @@ -1,1160 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN"> -<HTML> -<HEAD> - <META NAME="GENERATOR" CONTENT="SGML-Tools 1.0.9"> - <TITLE>xindy Manual: Command List</TITLE> - <LINK HREF="manual-4.html" REL=next> - <LINK HREF="manual-2.html" REL=previous> - <LINK HREF="manual.html#toc3" REL=contents> -</HEAD> -<BODY> -<A HREF="manual-4.html">Next</A> -<A HREF="manual-2.html">Previous</A> -<A HREF="manual.html#toc3">Contents</A> -<HR> -<H2><A NAME="s3">3. Command List</A></H2> - -<P>Here is the complete list of <SF>xindy</SF>'s commands that may be used in -the index style. The symbol <CODE>name</CODE> always refers to a string. We -separate the commands into the <EM>processing</EM> and -<EM>markup</EM> commands. The commands are listed in alphabetical order. -<P>The parenthesis `<CODE>[</CODE>' and `<CODE>]</CODE>' denote optional parts of the -syntax and `<CODE>{</CODE>' and `<CODE>}</CODE>' denote the grouping of elements. A -vertical bar indicates alternatives. However, the enclosing round -braces <EM>are</EM> part of the syntax and must be supplied. -<P> -<P> -<H2><A NAME="ss3.1">3.1 Processing Commands</A> -</H2> - -<P>Here follows the list of processing commands. -<P> -<A NAME="define-alphabet"></A> -<BLOCKQUOTE><CODE> -<PRE> -(define-alphabet name string-list) -</PRE> -</CODE></BLOCKQUOTE> -<P>Defines <CODE>name</CODE> to be the alphabet consisting of all elements of the -<CODE>string-list</CODE>. Examples: -<P> -<PRE> - (define-alphabet "example-alphabet" ("An" "Example" "Alphabet")) -</PRE> -<P>defines an alphabet consisting of exactly three symbols. For the -successor relationship holds: <CODE>succ("An")="Example"</CODE> and -<CODE>succ("Example")="Alphabet"</CODE>. The built-in alphabet <CODE>digits</CODE> is -defined as follows: -<P> -<PRE> - (define-alphabet "digits" - ("0" "1" "2" "3" "4" "5" "6" "7" "8" "9")) -</PRE> -<P> -<P> -<P> -<A NAME="define-attributes"></A> -<BLOCKQUOTE><CODE> -<PRE> -(define-attributes attribute-list) -</PRE> -</CODE></BLOCKQUOTE> -<P>Defines all attributes the raw index may contain. Parameter -<CODE>attribute-list</CODE> is a list of list of strings. The nesting level -must not be more than 2. So <CODE>(..(..)..)</CODE> is allowed, whereas -<CODE>(..(..(..)..)..)</CODE> is not. -<P>The list has two kinds of elements: strings and list of strings. A -single string is treated as if it were a single element list. So the -lists <CODE>("definition")</CODE> and <CODE>( ("definition") )</CODE> are equivalent. -All elements forming a list are a so-called <EM>attribute group</EM>. The -members of a group are written to the output file before any member -of the following groups are written. -<P>Examples of valid attributes lists are: -<P><CODE>("definition" "usage")</CODE> defines two attribute groups. The first -one contains all references with the attribute <CODE>definition</CODE> and the -second one all with the attribute <CODE>usage</CODE>. -<P><CODE>(("definition" "important") "usage")</CODE> defines two attribute -groups. The first one contains all references with the attributes -<CODE>definition</CODE> or <CODE>important</CODE> and the second one all with the -attribute <CODE>usage</CODE>. In the attribute group <CODE>("definition" -"important")</CODE> the attribute <CODE>definition</CODE> overrides <CODE>important</CODE>. -<P> -<P> -<P> -<A NAME="define-crossref-class"></A> -<BLOCKQUOTE><CODE> -<PRE> -(define-crossref-class name [:unverified]) -</PRE> -</CODE></BLOCKQUOTE> -<P>Defines <CODE>name</CODE> to be a class of cross references. We distinguish -two types of cross reference classes. <EM>Verified</EM> cross reference -classes can be checked for dangling references. If for instance a -cross reference points to the non-existent keyword `foo' a warning is -issued and the user is advised to correct the invalid cross reference. -This is the default. If for some reasons this mechanism must be -deactivated the switch <CODE>:unverified</CODE> can be used to suppress this -behaviour. -<P> -<P> -<A NAME="define-letter-group"></A> -<A NAME="define-letter-groups"></A> -<BLOCKQUOTE><CODE> -<PRE> -(define-letter-group name [:before lgname] [:after lgname] - [:prefixes list-of-prefixes]) - -(define-letter-groups list-of-letter-groups) -</PRE> -</CODE></BLOCKQUOTE> -<P>This command defines a letter group with name <CODE>name</CODE>, which must be -a string value, grouping all index entries that have a <EM>sort key</EM> -beginning with the prefix <CODE>name</CODE>. The command -<P> -<PRE> - (define-letter-group "a") -</PRE> -<P>is equivalent to the command -<P> -<PRE> - (define-letter-group "a" :prefixes ("a")) -</PRE> -<P>Using the latter form one can associate more than one prefix with a -given letter group. Also further prefixes can be added to an already -existing letter group by simply defining the same letter group again. -This results not in a redefinition but in adding more prefixes to the -currently defined prefixes. -<P>Example: -<P> -<PRE> - (define-letter-group "a") -</PRE> -<P>defines a letter group containing all index entries beginning with the -string <CODE>"a"</CODE>. -<P> -<PRE> - (define-letter-group "c" :after "a") -</PRE> -<P>defines a letter group containing all index entries beginning with the -string <CODE>"c"</CODE>. The letter group appears behind the letter group "a" -<P> -<PRE> - (define-letter-group "b" :after "a" :before "c") -</PRE> -<P>inserts letter group "b" between letter group "a" and "c". This allows -incremental definition of letter groups by extending already defined -ones. -<P>The arguments <CODE>:after</CODE> and <CODE>:before</CODE> define a partial order on -the letter groups. <SF>xindy</SF> tries to convert this partial order into -a total one. If this is impossible due to circular definitions, an -error is reported. If more than one possible total ordering can -result, it is left open which one is used, so one should always define -a complete total order. -<P>The command <CODE>define-letter-groups</CODE> (with an `s' at the end) is -simply an abbreviation for a sequence of -<CODE>define-letter-group</CODE> definitions where the elements are ordered in -the ordering given by the list. Example: -<P> -<PRE> - (define-letter-groups ("a" "b" "c") -</PRE> -<P>equals the definitions -<P> -<PRE> - (define-letter-group "a") - (define-letter-group "b" :after "a") - (define-letter-group "c" :after "b") -</PRE> -<P>See also commands <CODE>markup-letter-group-list</CODE> and -<CODE>markup-letter-group</CODE> for further information. -<P> -<P> -<P> -<A NAME="define-location-class"></A> -<BLOCKQUOTE><CODE> -<PRE> -(define-location-class name layer-list - [:min-range-length num] - [:hierdepth depth] - [:var]) -</PRE> -</CODE></BLOCKQUOTE> -<P>Defines <CODE>name</CODE> to be a location class consisting of the given list -of layers. A list of layers consists of names of basetypes and/or -strings representing separators. Separators must follow the -keyword argument <CODE>:sep</CODE>. If the keyword <CODE>:min-range-length</CODE> is -specified we define the <EM>minimum range length</EM> to be used when -building ranges. The argument <CODE>num</CODE> must be a positive integer -number or the keyword <CODE>none</CODE> in which case the building of ranges -is disallowed. If the switch <CODE>:var</CODE> is specified the declared class -is of type <EM>variable</EM>, i.e. it is a <EM>var-location-class</EM>. Since -building of ranges is currently only allowed for standard classes -<CODE>:var</CODE> and <CODE>:min-range-length</CODE> must not be used together. The -keyword argument <CODE>:hierdepth</CODE> can be used to declare that the -location references have to be tagged in a hierarchical form. Its -argument <CODE>depth</CODE> must be an integer number indicating the number of -layers the hierarchy does contain. See command -<CODE>markup-locref-list</CODE> for more information. Examples: -<P> -<PRE> - (define-location-class "page-numbers" ("arabic-numbers") - :minimum-range-length 3) -</PRE> -<P>Defines the location class <CODE>page-numbers</CODE> consisting of one layer -which is the alphabet <CODE>arabic-numbers</CODE>. Since the minimum -range length is set to 3 the location references 2, 3 and 4 don't form -a range because the range length is only 2. But the references 6, 7, -8, and 9 are enough to form a range. Some example instances of this -class are <CODE>0</CODE>, <CODE>1</CODE>, ... <CODE>2313</CODE>, etc. -<P> -<PRE> - (define-location-class "sections" :var - ("arabic-numbers" :sep "." - "arabic-numbers" :sep "." - "arabic-numbers")) -</PRE> -<P>defines a variable location class. Valid instances are <CODE>1</CODE>, -<CODE>1.1</CODE>, <CODE>1.2</CODE>, <CODE>2</CODE>, <CODE>2.4.5</CODE>, but none of <CODE>2-3</CODE> (wrong -separator), <CODE>1.2.3.4</CODE> (more than 3 layers), <CODE>2.3.iv</CODE> (roman -number instead of arabic one). -<P> -<P> -<P> -<A NAME="define-location-class-order"></A> -<BLOCKQUOTE><CODE> -<PRE> -(define-location-class-order list) -</PRE> -</CODE></BLOCKQUOTE> -<P>Defines the order in which the location classes are written to the -output file. The parameter <CODE>list</CODE> is a list of names of -location classes. Examples: -<P> -<PRE> - (define-location-class-order - ("page-numbers" "sections" "xrefs")) -</PRE> -<P>tells the system that the page numbers should appear before the -section numbers and that the cross references should appear at the -end. If this command is omitted, the declaration order of the -location classes in the index style is implicitly used as the output -order. In the case that a location class does not appear in the list, -the output may behave unexpectedly, so one should always enumerate all -used location classes when using this command. -<P> -<P> -<P> -<A NAME="define-rule-set"></A> -<BLOCKQUOTE><CODE> -<PRE> -(define-rule-set name - [ :inherit-from ("rule-set" "rule-set-2") ] - :rules (<rule>...) ) -</PRE> -</CODE></BLOCKQUOTE> -<P>A complete specification of a multi-phase sorting process for a -language requires that some rules have to appear in several subsequent -sorting phases. Rule sets can be used to define a set of rules that -can be instantiated in an arbitrary sorting phase. Basically, they -offer means to separate the definition of sorting rules from their -instantiation, hence, acting as a wrapper for calls to <CODE>sort-rule</CODE>. -They do not add new functionality that is not already present with -<CODE>sort-rule</CODE>. -<P>A rule can be of the form: -<P> -<PRE> - <rule> ::= ("pattern" "replacement" - [:string|:bregexp|:egegexp] [:again]) -</PRE> -<P>The following incomplete example defines a new rule set of name -<CODE>isolatin1-tolower</CODE> that inherits definitions from rule set -<CODE>latin-tolower</CODE>, overriding or adding the sort rules in the list of -<CODE>:rules</CODE>. -<P> -<PRE> - (define-rule-set "isolatin1-tolower" - - :inherit-from ("latin-tolower") - - :rules (("À" "à" :string :again) - ("Á" "á" :string :again) - ("Â" "â" :string :again) - ("Ã" "ã" :string :again) - ("Ä" "ä" :string :again) - ("Å" "å" :string :again) - ("Æ" "æ" :string :again) - ... - ) - ...) -</PRE> -<P>Rule sets can be instantiated with the command <CODE>use-rule-set</CODE>. For -further descriptions on the sorting model refer to the command -<CODE>sort-rule</CODE>. -<P> -<P> -<A NAME="define-sort-rule-orientations"></A> -<BLOCKQUOTE><CODE> -<PRE> -(define-sort-rule-orientations (orientations...)) -</PRE> -</CODE></BLOCKQUOTE> -<P>Defines the order for the different sorting phases. The currently -implemented <EM>orientations</EM> are <CODE>forward</CODE> and <CODE>backward</CODE>. This -command must precede all <CODE>sort-rule</CODE> commands in an index style. It -defines the orientations and implicitly sets the maximum number of -sorting phases performed. -<P>For further descriptions on the sorting model refer to the command -<CODE>sort-rule</CODE>. -<P> -<P> -<P> -<A NAME="merge-rule"></A> -<BLOCKQUOTE><CODE> -<PRE> -(merge-rule pattern replacement [:again] - [:bregexp | :eregexp | :string]) -</PRE> -</CODE></BLOCKQUOTE> -<P>Defines a keyword mapping rule that can be used to generate the -<EM>merge key</EM> from the <EM>main key</EM> of an index entry. This mapping -is necessary to map all keywords that are differently written but -belong to the same keyword to the same canonical keyword. -<P>The parameter <CODE>pattern</CODE> can be a POSIX-compliant regular expression -or an ordinary string. The implementation uses the GNU Rx regular -expression library which implements the POSIX regular expressions. -Regular expressions (REs) can be specified as <EM>basic regular -expressions</EM> (BREs) or <EM>extended regular expressions</EM> (EREs). You -can use the switch <CODE>:bregexp</CODE> to force the interpretation of the -pattern as a BRE, or <CODE>:eregexp</CODE> to interpret it as an ERE. If you -want <SF>xindy</SF> to interpret the pattern literally, use the switch -<CODE>:string</CODE>. If none of these switches is selected, <SF>xindy</SF> uses -an auto-detection mechanism to decide, if the pattern is a regular -expression or not. If it recognizes the pattern as a RE, it interprets -it as an ERE by default. -<P>The parameter <CODE>replacement</CODE> must be -a string possibly containing the special characters <CODE>&</CODE> -(substitutes for the complete match) and <CODE>\1</CODE>,...,<CODE>\9</CODE> -(substituting for the <EM>n</EM>-th submatch. Examples: -<P> -<PRE> - (merge-rule "A" "a") -</PRE> - -replaces each occurrence of the uppercase letter `<CODE>A</CODE>' with its -lowercase counterpart. -<P> -<PRE> - (merge-rule "\~"([AEOUaeou])" "\1") -</PRE> - -transforms the TeX umlaut-letters into their stripped counterparts, -such that `<CODE>\"A</CODE>' is treated as an `<CODE>A</CODE>' afterwards. -<P>The following sequences have a special meaning: -<P>`<CODE>~n</CODE>' : End of line symbol (<EM>linefeed</EM>). -<P>`<CODE>~b</CODE>' : The ISO-Latin character with the lowest ordinal number. -<P>`<CODE>~e</CODE>' : The ISO-Latin character with the highest ordinal number. -<P>`<CODE>~~</CODE>' : The tilde character. -<P>`<CODE>~"</CODE>' : The double quote character. -<P>Tilde characters and double quotes have to be quoted themselves with a -tilde character. The special characters `<CODE>~b</CODE>' and -`<CODE>~e</CODE>' allow the definition of arbitrary sorting orders by -rules. In connection with an additional character every position in -the alphabet can be described. E.g. `<CODE>m~e</CODE>' is -lexicographically placed between `<CODE>m</CODE>' and `<CODE>n</CODE>'. -<P>Due to efficiency, rules that just exchange characters or substitute -constant character sequences are not treated as regular expressions. -Therefore, instead of using the rule -<P> -<PRE> - (merge-rule "[A-Z]" "&x") -</PRE> -<P>it is more efficient (though less comfortable) to use -<P> -<PRE> - (merge-rule "A" "Ax") - (merge-rule "B" "Bx") - ... - (merge-rule "Z" "Zx") -</PRE> -<P>Usually rules are applied in order of their definition. Rules with a -special prefix precede those that begin with a class of characters, so -that the search pattern `<CODE>alpha</CODE>' is checked before `<CODE>.*</CODE>', but -`<CODE>auto</CODE>' and `<CODE>a.*</CODE>' are checked in order of their definition. -<P>The first rule from a style file that matches the input is -applied and the process restarts behind the substituted text. If no -rule could be applied, the actual character is copied from the input -and the process continues with the next character. -<P>Sometimes it is necessary to apply rules anew to the result of a -transformation. By specifying the keyword argument <CODE>:again</CODE> in the -merge rule the rule is marked as <EM>mutable</EM>, which means that after -using this rule the transformation process shall restart at the same -place. E.g. the rule -<P> -<PRE> - (merge-rule "\$(.*)\$" "\1" :again) -</PRE> -<P>deletes <EM>all</EM> surrounding `<CODE>$</CODE>' symbols from the input. -<P>See also command <CODE>sort-rule</CODE>. -<P> -<P> -<A NAME="merge-to"></A> -<BLOCKQUOTE><CODE> -<PRE> -(merge-to attr-from attr-to [:drop]) -</PRE> -</CODE></BLOCKQUOTE> -<P>A <EM>merge rule</EM> says that the attribute <CODE>attr-from</CODE> can be used -to build ranges in <CODE>attr-to</CODE>. Both attributes must name valid -attribute names. The switch <CODE>:drop</CODE> indicates, that the original -location reference with attribute <CODE>attr-from</CODE> has to be dropped -(removed), if a successful range was built with location references in -attribute <CODE>attr-to</CODE>. A detailed description is given in the section -about processing phases. -<P> -<P> -<P> -<A NAME="require"></A> -<BLOCKQUOTE><CODE> -<PRE> -(require filename) -</PRE> -</CODE></BLOCKQUOTE> -<P>This command allows to load more index style modules. The module is -searched in the directories defined in the search path. The file is -read in and processing of the current file continues. The argument -<CODE>filename</CODE> must be a string. This allows to decompose the -index style into several modules that can be included into the topmost -index style file. Example: -<P> -<PRE> - (require "french/alphabet.xdy") - (require "french/sort-rules.xdy") - (require "tex/locations.xdy") - (require "tex/markup.xdy") -</PRE> -<P>Submodules can load other submodules as well. If a file is required -that was already loaded, the <CODE>require</CODE> command is simply ignored -and processing continues without including this file twice. See also -command <CODE>searchpath</CODE>. -<P> -<P> -<P> -<A NAME="searchpath"></A> -<BLOCKQUOTE><CODE> -<PRE> -(searchpath {path-string | path-list}) -</PRE> -</CODE></BLOCKQUOTE> -<P>This command adds the given paths to the list of paths, <SF>xindy</SF> -searches for index style files. The argument <CODE>path-string</CODE> must be -a colon-separated string of directory names. If this path ends with a -colon the default search path is added to the end of the path list. -Example: -<P> -<BLOCKQUOTE><CODE> -<PRE> - (searchpath ".:/usr/local/lib/xindy:/usr/local/lib/xindy/english:") -</PRE> -</CODE></BLOCKQUOTE> -<P>adds the specified directories to the search path. Since the last path -ends with a colon, the built-in search path is added at the end. -Specifying -<P> -<BLOCKQUOTE><CODE> -<PRE> - (searchpath ("." - "/usr/local/lib/xindy" - "/usr/local/lib/xindy/english" - :default)) -</PRE> -</CODE></BLOCKQUOTE> -<P>yields exactly the same result as the example above. Here -<CODE>path-list</CODE> must be a list of strings and/or the keyword(s) -<CODE>:default</CODE> and <CODE>:last</CODE>. The keyword <CODE>:default</CODE> signifies that -the default pathnames are to be inserted at the specified position in -the list. The keyword <CODE>:last</CODE> allows to insert the currently active -paths at the indicated position. Since this allows to insert the -built-in paths at any position and incrementally adding new paths to -the search path, this version of the command ist more flexible than -the first version. -<P> -<P> -<A NAME="sort-rule"></A> -<BLOCKQUOTE><CODE> -<PRE> -(sort-rule pattern replacement [:run level] [:again]) -</PRE> -</CODE></BLOCKQUOTE> -<P>Defines a keyword mapping rule that can be used to generate the -<EM>sort key</EM> of an index entry from the <EM>merge key</EM>. This key is -used to sort the index entries lexicographically after they have been -merged using the merge key. -<P>The argument <CODE>:run</CODE> indicates that this rule is only in effect -a the specified <EM>level</EM> (default is level 0). For a detailed -discussion on the definition of sort rules for different layers refer -to the documentation about the new sorting scheme -(<CODE>new-sort-rules</CODE>) that comes with this distribution. -<P>See command <CODE>merge-rule</CODE> for more information about keyword -rules. -<P> -<P> -<P> -<A NAME="use-rule-set"></A> -<BLOCKQUOTE><CODE> -<PRE> -(use-rule-set [:run phase] - [:rule-set ( <rule-set>... )) -</PRE> -</CODE></BLOCKQUOTE> -<P>This command instantiates the gives rule sets to be in effect at -sorting phase <CODE>phase</CODE>. The order of the rule sets given with -argument <CODE>:rule-set</CODE> is significant. Rule set entries of rule set -appearing at the beginning of the list override entries in rule sets -at the end of the list. -<P>The following example declares that in phase 0 the rule sets -<CODE>din5007</CODE> and <CODE>isolatin1-tolower</CODE> should be active, whereas in -phase 2 the other rule sets have to be applied. -<P> -<PRE> - (use-rule-set :run 0 - :rule-set ("din5007" "isolatin1-tolower")) - - (use-rule-set :run 1 - :rule-set ("resolve-umlauts" - "resolve-sharp-s" - "isolatin1-tolower" - )) -</PRE> -<P>For a discussion on rule sets refer to command <CODE>define-rule-set</CODE>. -<P> -<P> -<P> -<H2><A NAME="ss3.2">3.2 Markup Commands</A> -</H2> - -<P> -<P>The following commands can be used to define the markup of the index. -They don't have any influence on the indexing process. Since the -markup scheme is characterized by the concept of <EM>environments</EM>, -the syntax and naming scheme of all commands follows a simple -structure. -<P>The commands can be separated into <EM>environment</EM> and -<EM>list-environment</EM> commands. All commands of the first group -support the keyword arguments <CODE>:open</CODE> and <CODE>:close</CODE>, whereas the -second group additionally supports the keyword argument <CODE>:sep</CODE>. If -one of these keyword arguments is missing, the default markup tag is -<EM>always</EM> the empty tag. The <CODE>:open</CODE> tag is always printed before -the object itself and the <CODE>:close</CODE> tag is always printed after the -object has been printed. If a list is printed the <CODE>:sep</CODE>tag is -printed between two elements of the list but not before the first -element, or after the last one. All commands dealing with a list have -the suffix `<CODE>-list</CODE>' as part of their command name. -<P>Since the number of commands and the heavy usage of <EM>default</EM> and -<EM>specialized</EM> tags makes the markup somehow complex (but very -powerful) we have added a mechanism to trace the markup tags -<SF>xindy</SF> omits during its markup phase with the command -<CODE>markup-trace</CODE>. -<P>Here follows the list of markup commands in alphabetical order with -some of the commands grouped together. -<P> -<P> -<A NAME="markup-attribute-group"></A> -<A NAME="markup-attribute-group-list"></A> -<BLOCKQUOTE><CODE> -<PRE> -(markup-attribute-group-list [:open string] [:close string] - [:sep string]) - -(markup-attribute-group [:open string] [:close string] - [:group group-num]) -</PRE> -</CODE></BLOCKQUOTE> -<P>Location class groups consist of lists of attribute groups. The markup -of this list can be defined with the command -<CODE>markup-attribute-group-list</CODE>. -<P>To allow different markup for different attribute groups the command -<CODE>markup-attribute-group</CODE> can be specialized on the group number -with the keyword argument <CODE>:group</CODE> which must be an integer number. -E.g., given are the groups <CODE>("definition" "theorem")</CODE> and -<CODE>("default")</CODE> with group numbers 0 and 1, then -<P> -<PRE> - (markup-attribute-group :open "<group0>" :close "</group0>" - :group 0) - - (markup-attribute-group :open "<group1>" :close "</group1>" - :group 1) -</PRE> -<P>can be used to assign different markup for both groups in a SGML-based -language. -<P> -<P> -<A NAME="markup-crossref-layer"></A> -<A NAME="markup-crossref-layer-list"></A> -<A NAME="markup-crossref-list"></A> -<BLOCKQUOTE><CODE> -<PRE> -(markup-crossref-list [:open string] [:close string] - [:sep string] - [:class crossref-class]) - -(markup-crossref-layer-list [:open string] [:close string] - [:sep string] - [:class crossref-class]) - -(markup-crossref-layer [:open string] [:close string] - [:class crossref-class]) -</PRE> -</CODE></BLOCKQUOTE> -<P>A crossref class group contains cross references of the same class. -The separator between the classes is defined with the -<CODE>(markup-locclass-list :sep)</CODE>-parameter. A list of cross references -can be tagged with the command <CODE>markup-crossref-list</CODE> that -specializes on the <CODE>:class</CODE> argument. -<P>Each cross reference is determined by a list of layers indicating -the target of the cross reference. To define a suitable markup for -such a list the command <CODE>markup-crossref-layer-list</CODE> can be used. -<P>Each layer of a cross reference can be assigned two tags that -specialize on the class of the reference, like all other commands. -<P>A suitable markup for a cross reference class <CODE>see</CODE> within LaTeX2e -could look like that: -<P> -<PRE> - (markup-crossref-list :class "see" :open "\emph{see} " - :sep "; ") - (markup-crossref-layer-list :class "see" :sep ",") - (markup-crossref-layer :class "see" - :open "\textbf{" :close "}") -</PRE> -<P>An example output could look like -<P> -<BLOCKQUOTE> -... <EM>see</EM> <B>house</B>; <B>garden</B>,<B>winter</B>; <B>greenhouse</B> -</BLOCKQUOTE> -<P> -<P> -<A NAME="markup-index"></A> -<BLOCKQUOTE><CODE> -<PRE> -(markup-index [:open string] [:close string] - [ :flat | :tree | :hierdepth depth ]) -</PRE> -</CODE></BLOCKQUOTE> -<P>Defines the markup tags that enclose the whole index via the -<CODE>:open</CODE> and <CODE>:close</CODE> parameters. Examples: -<P> -<PRE> - (markup-index :open "Here comes the index~n" - :close "That's all folks!~n") -</PRE> -<P>defines that the <CODE>:open</CODE> string is printed before the rest of the -index and the <CODE>:close</CODE> string appears after the index is printed. -<P>Additionally one can specify the form of the generated index. It is -possible to produce flat indexes by specifying the switch <CODE>:flat</CODE>, -to generate a tree with the <CODE>:tree</CODE> switch or any kind of mixture -between both by specifying the depth up to which trees shall be built -with the parameter <CODE>:hierdepth</CODE>. Its argument <CODE>depth</CODE> is the -number of layers that can be formed into a tree. Therefore <CODE>:flat</CODE> -is an abbrevation of <CODE>:hierdepth 0</CODE> and <CODE>:tree</CODE> is an -abbrevation of <CODE>:hierdepth max-depth</CODE>, with <CODE>max-depth</CODE> being -the maximum number of layers a keyword has. An example: the keywords -<P> -<PRE> - ("tree" "binary" "AVL") - ("tree" "binary" "natural") -</PRE> -<P>can be transformed in the following ways: -<P>A flat index (<CODE>:flat</CODE> or <CODE>:hierdepth 0</CODE>) -<P> -<PRE> - tree binary AVL - tree binary natural -</PRE> -<P>with <CODE>:hierdepth 1</CODE> -<P> -<PRE> - tree - binary AVL - binary natural -</PRE> -<P>and a tree (<CODE>:tree</CODE> or <CODE>:hierdepth</CODE> > 1) -<P> -<PRE> - tree - binary - AVL - natural -</PRE> -<P>Most often one will create tree-like indexes or ones that are flat. -<P> -<P> -<A NAME="markup-indexentry-list"></A> -<A NAME="markup-indexentry"></A> -<BLOCKQUOTE><CODE> -<PRE> -(markup-indexentry-list [:open string] [:close string] - [:sep string] [:depth integer]) - -(markup-indexentry [:open string] [:close string] - [:depth integer]) -</PRE> -</CODE></BLOCKQUOTE> -<P>Letter groups consists of a list of index entries. The command -<CODE>markup-indexentry-list</CODE> defines the markup of these lists. The -markup can be specialized on the depth if the index is hierarchically -organized. The command -<P> -<PRE> - (markup-indexentry-list :open "\begin{IdxentList}" - :close "\end{IdxentList}" - :sep "~n") -</PRE> -<P>defines that the index entries of all layers are wrapped into the -given markup tags. If additionally -<P> -<PRE> - (markup-indexentry-list :open "\begin{IdxentListII}" - :close "\end{IdxentListII}" - :sep "~n" - :depth 2) -</PRE> -<P>is defined, all index entry lists of all layers (except layer 2) are -tagged according to the first specification, and the index entry list -within depth 2 are tagged according to the second rule. -<P>The command <CODE>markup-indexentry</CODE> defines the markup of an index entry -at a given depth. Since index entries may also contain subentries and -the markup for subentries may be different in different layers, the -optional keyword argument <CODE>:depth</CODE> can be used to assign different -markup for different layers. If depth is ommited the default markup -for all possible depths is defined. The top-most index entries have -depth 0. -<P> -<PRE> - (markup-indexentry :open "\begin{Indexentry}" - :close "\end{Indexentry}") -</PRE> -<P>defines that the index entries of all layers are wrapped into the -given markup tags. If additionally -<P> -<PRE> - (markup-indexentry :open "\begin{IndexentryII}" - :close "\end{IndexentryII}" - :depth 2) -</PRE> -<P>is defined, all index entries of all layers (except layer 2) are tagged -according to the first specification, and the index entries with depth -2 are tagged according to the second rule. -<P> -<P> -<A NAME="markup-keyword-list"></A> -<A NAME="markup-keyword"></A> -<BLOCKQUOTE><CODE> -<PRE> -(markup-keyword-list [:open string] [:close string] - [:sep string] [:depth integer]) - -(markup-keyword [:open string] [:close string] - [:depth integer]) -</PRE> -</CODE></BLOCKQUOTE> -<P> -<P>The print key of an index entry consists of a list of strings. The -markup of this list can be defined with the command -<CODE>markup-keyword-list</CODE>. The keyword argument <CODE>:depth</CODE> may be -specified to define the markup of the list at a particular depth. -<P>The keyword of an index entry consists of a list of strings. Each of -these components is tagged with the strings defined with the command -<CODE>markup-keyword</CODE>. Since we maybe need different markup for -different layers, the optional keyword argument can be used to -specialize this markup for some depth. -<P> -<P> -<A NAME="markup-letter-group-list"></A> -<A NAME="markup-letter-group"></A> -<BLOCKQUOTE><CODE> -<PRE> -(markup-letter-group-list [:open string] [:close string] - [:sep string]) - -(markup-letter-group [:open string] [:close string] [:group group-name] - [:open-head string] [:close-head string] - [:upcase | :downcase | :capitalize]) -</PRE> -</CODE></BLOCKQUOTE> -<P>The first command defines the markup of the letter group with name -<CODE>group-name</CODE>. Since the markup of letter groups often contains the -name of the letter group as a part of it, the other keyword arguments -allow an additional markup for this group name. If one of the -parameters <CODE>:open-head</CODE> and <CODE>:close-head</CODE> is specified -additional markup is added as can be described as follows: -<P> -<PRE> - <OPEN> - IF (:open-head OR :close-head) - <OPEN-HEAD> - transformer-of(<GROUP-NAME>) - <CLOSE-HEAD> - FI - <INDEXENTRIES...> - <CLOSE> -</PRE> -<P>Here, <CODE>transformer-of</CODE> is a function that possibly transforms the -string representing the group name into another string. The -transformers we currently support can be specified with the switches -<CODE>:upcase</CODE>, <CODE>:downcase</CODE> and <CODE>:capitalize</CODE> which result in the -corresponding string conversions. If none of them is specified no -transformation is done at all. -<P>The command <CODE>markup-letter-group</CODE> defines the markup of the list of -letter groups. -<P> -<P> -<A NAME="markup-locclass-list"></A> -<BLOCKQUOTE><CODE> -<PRE> -(markup-locclass-list [:open string] [:close string] - [:sep string]) -</PRE> -</CODE></BLOCKQUOTE> -<P>Each index entry contains a list of location class groups. This markup -command can be used to define the markup of this list. -<P> -<P> -<A NAME="markup-locref"></A> -<BLOCKQUOTE><CODE> -<PRE> -(markup-locref [:open string] [:close string] - [:class locref-class] - [:attr attribute] - [:depth integer]) -</PRE> -</CODE></BLOCKQUOTE> -<P>The markup tags of a location reference can be specialized on the -three arguments <CODE>:class</CODE>, <CODE>:attr</CODE> and additionally, if -sub-references are used, <CODE>:depth</CODE>. Most often one will only use a -tag depending on the attribute. For example, all location references -with the attribute <CODE>definition</CODE> should appear in a font series like -bold, emphasizing the importance of this location reference; those -with the attribute <CODE>default</CODE> in font shape italic. The markup in -this case would not specialize on the depth or any particular class. A -valid definition, suitable for a usage within HTML, could look like -this. -<P> -<PRE> - (markup-locref :open "<B>" :close "</B>" :attr "definition") - (markup-locref :open "<I>" :close "</I>" :attr "default") -</PRE> -<P> -<P> -<A NAME="markup-locref-class"></A> -<BLOCKQUOTE><CODE> -<PRE> -(markup-locref-class [:open string] [:close string] - [:class locref-class]) -</PRE> -</CODE></BLOCKQUOTE> -<P>All location references of a particular location reference class can -be wrapped into the tags defined by this command. It specializes on -the keyword argument <CODE>:class</CODE>. -<P> -<P> -<A NAME="markup-locref-layer-list"></A> -<A NAME="markup-locref-layer"></A> -<BLOCKQUOTE><CODE> -<PRE> -(markup-locref-layer [:open string] [:close string] - [:depth integer] [:layer integer] - [:class locref-class]) - -(markup-locref-layer-list [:open string] [:close string] - [:sep string] - [:depth integer] - [:class locref-class]) -</PRE> -</CODE></BLOCKQUOTE> -<P>A location reference contains a list of location reference layers. The -second markup command can be used to markup this list. It specializes -on the class of the location references and the depth (if -sub-references are used). -<P>The first command allows to tag the elements of a layer list -differently. The first element of this list can is specialisable with -<CODE>:layer 0</CODE>, the next element with <CODE>:layer 1</CODE>, etc. See the next -example for an example. -<P> -<P> -<A NAME="markup-locref-list"></A> -<BLOCKQUOTE><CODE> -<PRE> -(markup-locref-list [:open string] [:close string] [:sep string] - [:depth integer] [:class locref-class]) -</PRE> -</CODE></BLOCKQUOTE> -<P>An attribute group contains a list of location references and/or -ranges. Additionally a layered location reference itself may contain -sub-references that are stored as a list of location references. We -specialize the markup for these lists on the location class they -belong to with the keyword argument <CODE>:class</CODE>, and on <CODE>:depth</CODE> -that specializes on the different subentry levels when using -location references with sub-references. -<P>Given is a list of location references that have the class description -<P> -<PRE> - (define-location-class "Appendix" - ("ALPHA" :sep "-" "arabic-numbers") - :hierdepth 2) -</PRE> -<P>This location class has instances like <CODE>A-1</CODE>, <CODE>B-5</CODE>, etc. The -keyword argument <CODE>:hierdepth 2</CODE> informs <SF>xindy</SF> to markup these -location references in a hierarchical form. With the commands -<P> -<PRE> - (markup-locref-list :sep "; " - :depth 0 :class "Appendix") - (markup-locref-list :open " " :sep "," - :depth 1 :class "Appendix") - (markup-locref-layer :open "{\bf " :close "}" :layer 0 - :depth 0 :class "Appendix") -</PRE> -<P>we obtain a markup sequence for some example data that could look like -<P> -<PRE> - {\bf A} 1,2,5; {\bf B} 5,6,9; {\bf D} 1,5,8; ... -</PRE> -<P> -<P> -<P> -<A NAME="markup-range"></A> -<BLOCKQUOTE><CODE> -<PRE> -(markup-range [:open string] [:close string] [:sep string] - [:class locref-class] - [:length num] [:ignore-end]) -</PRE> -</CODE></BLOCKQUOTE> -<P>A range consists of two location references. Markup can be specified -with the <CODE>:open</CODE> and <CODE>:close</CODE> arguments and one separator given -by the argument <CODE>:sep</CODE>. -<P>Since both location references are tagged with markup defined by the -command <CODE>markup-locref</CODE> a specialization on attributes or depth is -not necessary. Specialization is allowed on the class they belong to, -because the separator between two location refences may be different -for each location class. Argument <CODE>:length</CODE> can be used to define -different markup for different lengths. In conjunction with -<CODE>:length</CODE> is may be useful not to print the second location -reference at all. For example, one wishes to markup ranges of length 1 -in the form <EM>Xf.</EM> instead of <EM>X--Y</EM>. This can be accomplished -with the switch <CODE>:ignore-end</CODE>. -<P>The markup tags for a range <EM>(X,Y)</EM> can be described as follows: -<P> -<PRE> - <OPEN> - Markup of location reference X - <SEP> - IF (not :ignore-end) - Markup of location reference Y - FI - <CLOSE> -</PRE> -<P> -<P>The following tags can be used to define a range of page numbers -(given in a location class <CODE>page-numbers</CODE>) without considering the -open and close parameters: -<P> -<PRE> - (markup-range :sep "-" :class "page-numbers") -</PRE> -<P>Location ranges then appear separated by a hyphen in a form like this: -<P> -<PRE> - ..., 5-8, 19-23, ... -</PRE> -<P> -<P> -<A NAME="markup-trace"></A> -<BLOCKQUOTE><CODE> -<PRE> -(markup-trace [:on] [:open string] [:close string]) -</PRE> -</CODE></BLOCKQUOTE> -<P>This command can be used to activate the tracing of all -markup commands <SF>xindy</SF> executes. The switch <CODE>:on</CODE> activates the -trace. If <CODE>:on</CODE> is omitted, the command line flag <CODE>-t</CODE> can be -used as well. All tags which are emitted but not yet defined -explicitly by the user are tagged with a symbolic notation indicating -the commands that must be used to define this tag. The defaults for -the keyword argument <CODE>:open</CODE> is `<CODE><</CODE>' and for <CODE>:close</CODE> is -`<CODE>></CODE>'. The beginning of an example output could look like: -<P> -<PRE> - <INDEX:OPEN> - <LETTER-GROUP-LIST:OPEN> - <LETTER-GROUP:OPEN ["a"]> - <INDEXENTRY-LIST:OPEN [0]> - <INDEXENTRY:OPEN [0]> - <KEYWORD-LIST:OPEN [0]> - <KEYWORD:OPEN [0]> - ... -</PRE> -<P>We use a simple indentation scheme to make the structure of the tags -visible. The symbolic tag <CODE><LETTER-GROUP:OPEN ["a"]></CODE> for example -indicates that the tag that can be specified with the command -<P> -<PRE> - (markup-letter-group :open "XXX" :group "a" ... ) -</PRE> -<P>is emitted at this point in the markup process. By incrementally -adding markup commands to the index, more and more tags can be defined -until the whole markup is defined. This general mechanism should allow -everyone understand the markup process. The best is to start with a -small index, define the complete markup and afterwards process the -whole index. Additionally one can enclose the symbolic tags into an -environment that is neutral to the document preparation system, such -as a comment. For TeX this could be -<P> -<PRE> - (markup-trace :open "%%" :close "~n") -</PRE> -<P>or a definition in the TeX document like -<P> -<PRE> - \def\ignore#1{} -</PRE> -<P>combined with the command -<P> -<PRE> - (markup-trace :open "\ignore{" :close "}") -</PRE> -<P> -<P> -<P> -<A NAME="raw-index"></A> <H2><A NAME="ss3.3">3.3 Raw Index Interface</A> -</H2> - -<P> -<P>This section can be skipped if the reader is not interested in -adapting <SF>xindy</SF> to a new document preparation system. -<P>The raw index is the file that represents the index that is to be -processed. Since many different document preparation systems may use -different forms of index representations, their output must be -transformed in a form readable by <SF>xindy</SF>. We also could have -written an configurable parser performing this task, but usually a -tool written with some text processing tools such as <CODE>perl</CODE>, -<CODE>sed</CODE> or <CODE>awk</CODE> can achieve the same task as well. Therefore, -adapting <SF>xindy</SF> to a completely different system can mostly be -done by writing an appropriate raw index filter. -<P>The format of the raw index interface of <SF>xindy</SF> is defined as -follows: -<P> -<A NAME="indexentry"></A> -<BLOCKQUOTE><CODE> -<PRE> -(indexentry { :key string-list [:print string-list] - | :tkey list-of-layers } - [:attr string] - { :locref string [:open-range | :close-range] - | :xref string-list } ) -</PRE> -</CODE></BLOCKQUOTE> -<P>The pseudo variable <EM>string</EM> is a sequence of characters -surrounded by double quotes, e.g. -<P> -<PRE> - "Hi, it's me" "one" "a string with two \"double quotes\"" -</PRE> -<P>are three examples of valid strings. If you need to include a -double quote as a literal character, you must quote it itself with a -backslash as shown in the third example. A <EM>string list</EM> is simply -a list of strings separated by whitespaces and surrounded by round -braces. An example of a string list is -<P> -<PRE> - ("This" "is" "a" "list" "of" "strings") -</PRE> -<P>So far about the syntax. The semantics of the different elements are -described here. -<P> -<P> -<DL> -<P> -<DT><B><CODE>:key</CODE></B><DD><P>The argument <EM>string list</EM> defines the keyword of -the index entry. It must be a list of strings, since the keyword may -consist of different layers such as <CODE>("heap" "fibonacci")</CODE>. -<P> -<DT><B><CODE>:print</CODE></B><DD><P>The optional <EM>print key</EM> defines the way the -keyword has to be printed in the markup phase. -<P> -<DT><B><CODE>:tkey</CODE></B><DD><P>Another possibility to define the keys of an -index entry is with the <CODE>:tkey</CODE> keyword argument. It can be used -instead of the <CODE>:key</CODE> and <CODE>:print</CODE> arguments. Instead of -specifying separately the key and the corresponding print key, we -define the keyword by its layers. Each layer consist of a list of one -or two strings. The first string will be interpreted as the main key, -whereas the second one will become the print key. If the print key is -ommited, the main key is taken instead. So the definition -<P> -<PRE> - :tkey (("This") ("is") ("a") ("bang" "BANG !!!")) -</PRE> -<P>is equivalent to -<P> -<PRE> - :key ("This" "is" "a" "bang") - :print ("This" "is" "a" "BANG !!!") -</PRE> -<P> -<P> -<DT><B><CODE>:locref</CODE></B><DD><P>The reference an index entry describes can be a -<EM>location reference</EM> or a <EM>cross reference</EM>. The switch -<CODE>:locref</CODE> describes a location reference. Its optional arguments -are <CODE>:open-range</CODE> and <CODE>:close-range</CODE>. The <EM>string</EM> that must -be supplied must somehow encode the location reference. It might look -like the string <CODE>"25"</CODE> representing the page number 25, or -<CODE>"Appendix-I"</CODE> representing the first appendix numbered in -uppercase roman numerals. -<P> -<DT><B><CODE>:open-range</CODE>,<CODE>:close-range</CODE></B><DD><P>These are switches that do not -take any arguments. They describe the beginning and ending of a -<EM>range</EM>, starting or ending from the location reference that is -given by the argument <CODE>:locref</CODE>. If they are supplied, the -location reference may have influence on the way ranges are build. -<P> -<DT><B><CODE>:xref</CODE></B><DD><P>These arguments choose the second alternative. The -argument <EM>string list</EM> of parameter <CODE>:xref</CODE> describes where the -index entry should point to. -<P> -<DT><B><CODE>:attr</CODE></B><DD><P>This parameter may be used to tag a location reference -with a certain attribute or it names the class of a cross reference. -It may also used to associate different markup for different -attributes in the markup phase. If this parameter is omitted or is the -empty string, the indexentry is declared to have the attribute -<CODE>default</CODE>. -<P> -</DL> -<P>Some examples: -<P> -<PRE> - (indexentry :key ("airplane") :locref "25" :attr "default") -</PRE> -<P>defines an index entry with the key `airplane' indexed on page '25'. -This index entry has the attribute <CODE>default</CODE>. -<P> -<PRE> - (indexentry :key ("house") :xref ("building") :attr "see") -</PRE> -<P>defines a cross reference with the key 'house' pointing to the term -'building'. This cross reference belongs to the cross reference class -<CODE>see</CODE>. -<P> -<PRE> - (indexentry :key ("house") :xref ("building") :open-range) -</PRE> -<P>is an invalid specification, since <CODE>:open-range</CODE> mustn't be used -together with cross references. -<P> -<P> -<P> -<HR> -<A HREF="manual-4.html">Next</A> -<A HREF="manual-2.html">Previous</A> -<A HREF="manual.html#toc3">Contents</A> -</BODY> -</HTML> diff --git a/Build/source/utils/xindy-old/doc/manual-4.html b/Build/source/utils/xindy-old/doc/manual-4.html deleted file mode 100644 index 6d39d7ba240..00000000000 --- a/Build/source/utils/xindy-old/doc/manual-4.html +++ /dev/null @@ -1,230 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN"> -<HTML> -<HEAD> - <META NAME="GENERATOR" CONTENT="SGML-Tools 1.0.9"> - <TITLE>xindy Manual: Processing Phases</TITLE> - <LINK HREF="manual-5.html" REL=next> - <LINK HREF="manual-3.html" REL=previous> - <LINK HREF="manual.html#toc4" REL=contents> -</HEAD> -<BODY> -<A HREF="manual-5.html">Next</A> -<A HREF="manual-3.html">Previous</A> -<A HREF="manual.html#toc4">Contents</A> -<HR> -<H2><A NAME="startup-phase"></A> <A NAME="s4">4. Processing Phases</A></H2> - -<H2><A NAME="ss4.1">4.1 The Startup Phase</A> -</H2> - -<P>After the system is started, <SF>xindy</SF> reads in the index style that -is passed as a command line argument. Each <CODE>require</CODE> command is -executed and the internal data structures representing the index style -are built up. The index style must completely be read in before the -raw index can be read. -<P> -<P> -<A NAME="processing-phase"></A> <H2><A NAME="ss4.2">4.2 The Processing Phase</A> -</H2> - -<P>The processing phase starts with reading the complete raw index. The -name of the raw index file must be passed via the command line. All -index entries are read in and pre-processed. All attributes and -cross reference classes are checked if they are already known to the -system. All strings representing location references are matched -against all known location classes. Appropriate warnings are issued, -if errors are encountered. -<P>After the raw index has completely been read in, the -location references of each index entry are merged, separated and -sorted and the building of ranges takes place. This phase is the most -complex one and we will describe it in detail. -<P> -<OL> -<LI> All location references are separated according to the class -they belong to. These groups are called <EM>location class groups</EM>. -Possible groups are all defined location and crossref classes. See -the commands <CODE>define-location-class</CODE> and -<CODE>define-crossref-class</CODE> for a description how these classes can -be defined. - -The classes are sorted according to an order that can be defined with -the command <CODE>define-location-class-order</CODE>. -</LI> -<LI> The further processing of each location class group is -different for the location classes and the crossref classes. - -<UL> -<LI> Cross references are sorted lexicographically based on -the ISO-Latin alphabet. - -<A NAME="sort-merge-locrefs"></A> </LI> -<LI> To illustrate the processing of location references we assume -the following list: - -<BLOCKQUOTE> - <EM>13</EM>, <EM>14</EM>, <EM>15</EM>, <EM>18</EM>, <B>12</B>, <B>13</B>, -<B>14</B>, <B>16</B>, 14, 16 -</BLOCKQUOTE> - - -The location references in italics own the attribute `important, -those with in boldface have attribute `definition', and all others -are own the attribute `default'. Imagine, the attribute groups were -defined with the commands - -<BLOCKQUOTE><CODE> -<PRE> - (define-attribute-groups (("definition" "important") - ("default"))) - - (merge-to "definition" "default" :drop) - -</PRE> -</CODE></BLOCKQUOTE> - - -See commands <CODE>define-attributes</CODE> and <CODE>merge-to</CODE> for a -detailed description. - -The substitution rules are applied. This means that -location references <B>13</B> and <B>14</B> with attribute `important' -are <EM>substituted</EM> by the location references <EM>13</EM> and <EM>14</EM> -with attribute `definition'. Substitution means removing from the -list of location references. - -Substitution occurs because the definition of the attribute groups -implicitly defines <CODE>"definition"</CODE> <EM>substitutes</EM> -<CODE>"important"</CODE>. - -The resulting list is now - -<BLOCKQUOTE> - <EM>13</EM>, <EM>14</EM>, <EM>15</EM>, <EM>18</EM>, <B>12</B>, <B>16</B>, 14, -16 -</BLOCKQUOTE> - - -<A NAME="def merge-to"></A> The <CODE>merge-to</CODE> rules are applied. -Their meaning is to make location references appear with another -attribute as well, but only in the function of supporting the -building of ranges. They disappear after the ranges are built. The -location references that cause new location refererences to be -added are called <EM>parents</EM>, whereas the new ones are called -<EM>childs</EM>. The example rule results in the adding of all -refernces with attribute `definition' to the attribute `default' -which results in the list - -<BLOCKQUOTE> - <EM>13</EM>, <EM>14</EM>, <EM>15</EM>, <EM>18</EM>, <B>12</B>, <B>16</B>, (13), -14, (15), 16, (18) -</BLOCKQUOTE> - - -The childs are put in parenthesis since they may only be used to -build up ranges. - -For each attribute we now try to build ranges. Since the switch -<CODE>:drop</CODE> was specified we must start with the attribute -`default', because a successful merging of location references may -result in dropping the parents. This results in the range `13--16'. -The childs -(13) and (15) were used in the building of ranges, so their parents -<EM>13</EM> and <EM>15</EM> have to be removed from the list of -location references. This step would be omitted if the switch -<CODE>:drop</CODE> were not specified. After unsucessfully trying to build -more ranges and dropping the location references <EM>13</EM>, <EM>15</EM> -and (18)--which was only meant to build ranges--we obtain the list - -<BLOCKQUOTE> -<EM>14</EM>, <EM>18</EM>, <B>12</B>, <B>16</B>, 13--16 -</BLOCKQUOTE> - - -Finally the attributes are brought into the right order. In our -example the location references of the first attribute group are -merged and sorted lexicographically resulting in two attribute groups - -<BLOCKQUOTE> -(<B>12</B>, <EM>14</EM>, <B>16</B>, <EM>18</EM>) (13--16) -</BLOCKQUOTE> - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -</LI> -</UL> - -</LI> -</OL> -<P>After all index entries have been processed the letter groups are -formed and the index entries and location references are transformed -into tree like structures as defined in the index style. -<P> -<P> -<P> -<A NAME="markup-phase"></A> <H2><A NAME="ss4.3">4.3 The Markup Phase</A> -</H2> - -<P>After the index has completely been processed, the markup phase -traverses the tree-like structure of the index. Each step triggers the -appropriate markup events resulting in the emitting of markup tags. -<P> -<P> -<P> -<HR> -<A HREF="manual-5.html">Next</A> -<A HREF="manual-3.html">Previous</A> -<A HREF="manual.html#toc4">Contents</A> -</BODY> -</HTML> diff --git a/Build/source/utils/xindy-old/doc/manual-5.html b/Build/source/utils/xindy-old/doc/manual-5.html deleted file mode 100644 index 072920545aa..00000000000 --- a/Build/source/utils/xindy-old/doc/manual-5.html +++ /dev/null @@ -1,63 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN"> -<HTML> -<HEAD> - <META NAME="GENERATOR" CONTENT="SGML-Tools 1.0.9"> - <TITLE>xindy Manual: Index</TITLE> - <LINK HREF="manual-6.html" REL=next> - <LINK HREF="manual-4.html" REL=previous> - <LINK HREF="manual.html#toc5" REL=contents> -</HEAD> -<BODY> -<A HREF="manual-6.html">Next</A> -<A HREF="manual-4.html">Previous</A> -<A HREF="manual.html#toc5">Contents</A> -<HR> -<H2><A NAME="INDEX"></A> <A NAME="s5">5. Index</A></H2> - -<P> -<P><B>List of Commands</B> -<P> -<A HREF="manual-3.html#define-attributes">define-attributes</A><BR> -<A HREF="manual-3.html#define-alphabet">define-alphabet</A><BR> -<A HREF="manual-3.html#define-crossref-class">define-crossref-class</A><BR> -<A HREF="manual-3.html#define-letter-group">define-letter-group</A><BR> -<A HREF="manual-3.html#define-letter-groups">define-letter-groups</A><BR> -<A HREF="manual-3.html#define-location-class">define-location-class</A><BR> -<A HREF="manual-3.html#define-location-class-order">define-location-class-order</A><BR> -<A HREF="manual-3.html#define-rule-set">define-rule-set</A><BR> -<A HREF="manual-3.html#define-sort-rule-orientations">define-sort-rule-orientations</A><BR> -<A HREF="manual-3.html#indexentry">indexentry</A><BR> -<A HREF="manual-3.html#markup-attribute-group">markup-attribute-group</A><BR> -<A HREF="manual-3.html#markup-attribute-group-list">markup-attribute-group-list</A><BR> -<A HREF="manual-3.html#markup-crossref-layer">markup-crossref-layer</A><BR> -<A HREF="manual-3.html#markup-crossref-layer-list">markup-crossref-layer-list</A><BR> -<A HREF="manual-3.html#markup-crossref-layer">markup-crossref-layer</A><BR> -<A HREF="manual-3.html#markup-index">markup-index</A><BR> -<A HREF="manual-3.html#markup-indexentry">markup-indexentry</A><BR> -<A HREF="manual-3.html#markup-indexentry-list">markup-indexentry-list</A><BR> -<A HREF="manual-3.html#markup-keyword">markup-keyword</A><BR> -<A HREF="manual-3.html#markup-keyword-list">markup-keyword-list</A><BR> -<A HREF="manual-3.html#markup-letter-group">markup-letter-group</A><BR> -<A HREF="manual-3.html#markup-letter-group-list">markup-letter-group-list</A><BR> -<A HREF="manual-3.html#markup-locclass-list">markup-locclass-list</A><BR> -<A HREF="manual-3.html#markup-locref">markup-locref</A><BR> -<A HREF="manual-3.html#markup-locref-class">markup-locref-class</A><BR> -<A HREF="manual-3.html#markup-locref-layer">markup-locref-layer</A><BR> -<A HREF="manual-3.html#markup-locref-layer-list">markup-locref-layer-list</A><BR> -<A HREF="manual-3.html#markup-locref-list">markup-locref-list</A><BR> -<A HREF="manual-3.html#markup-range">markup-range</A><BR> -<A HREF="manual-3.html#markup-trace">markup-trace</A><BR> -<A HREF="manual-3.html#merge-rule">merge-rule</A><BR> -<A HREF="manual-3.html#merge-to">merge-to</A><BR> -<A HREF="manual-3.html#require">require</A><BR> -<A HREF="manual-3.html#searchpath">searchpath</A><BR> -<A HREF="manual-3.html#sort-rule">sort-rule</A><BR> -<A HREF="manual-3.html#use-rule-set">use-rule-set</A><P> -<P> -<P> -<HR> -<A HREF="manual-6.html">Next</A> -<A HREF="manual-4.html">Previous</A> -<A HREF="manual.html#toc5">Contents</A> -</BODY> -</HTML> diff --git a/Build/source/utils/xindy-old/doc/manual-6.html b/Build/source/utils/xindy-old/doc/manual-6.html deleted file mode 100644 index dfbf33ccc91..00000000000 --- a/Build/source/utils/xindy-old/doc/manual-6.html +++ /dev/null @@ -1,53 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN"> -<HTML> -<HEAD> - <META NAME="GENERATOR" CONTENT="SGML-Tools 1.0.9"> - <TITLE>xindy Manual: References</TITLE> - <LINK HREF="manual-5.html" REL=previous> - <LINK HREF="manual.html#toc6" REL=contents> -</HEAD> -<BODY> -Next -<A HREF="manual-5.html">Previous</A> -<A HREF="manual.html#toc6">Contents</A> -<HR> -<H2><A NAME="s6">6. References</A></H2> - -<P> -<P>The following books and papers were referenced in this document. -<P> -<OL> -<LI> D. E. Knuth, <EM>The TeXbook</EM>, Addison-Wesley, 1984 -</LI> -<LI> Leslie Lamport, LaTeX <EM>A Document Preparation System</EM>, -Addison-Wesley, 1986 -</LI> -<LI> Joachim Schrod, <EM>An International Version of MakeIndex</EM>, -Cahiers GUTenberg, 10, p81-90, 1991 -</LI> -<LI> Pehong Chen and Michael A. Harrison, <EM>Automating Index -Preparation</EM>, TR-87/347, University of California Berkeley, 1987 -<A NAME="makeindex"></A> -</LI> -<LI> Roger Kehr, <SF>xindy</SF>, <EM>Ein Flexibles Indexierungssystem</EM>, -Studienarbeit FB Informatik, TH-Darmstadt, November 1995. -</LI> -<LI> Joachim Schrod and Gabor Herr, <EM>MakeIndex Version 3.0</EM>, -Technical University Darmstadt, 1991 -</LI> -<LI> Roger Kehr, <SF>xindy</SF> -- <EM>A Flexible Indexing System</EM>, -Technical Report No. 11/1997, Computer Science Department, Darmstadt -University of Technology, 1997. Also accessible from the <SF>xindy</SF> -homepage. -</LI> -<LI> Roger Kehr, <SF>xindy</SF> -- <EM>A Flexible Indexing System</EM>, -Proceedings of the EuroTeX'98, St. Malo, France, March 1998 -</LI> -</OL> -<P> -<HR> -Next -<A HREF="manual-5.html">Previous</A> -<A HREF="manual.html#toc6">Contents</A> -</BODY> -</HTML> diff --git a/Build/source/utils/xindy-old/doc/manual-7.html b/Build/source/utils/xindy-old/doc/manual-7.html deleted file mode 100644 index c1c26ed507a..00000000000 --- a/Build/source/utils/xindy-old/doc/manual-7.html +++ /dev/null @@ -1,53 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN"> -<HTML> -<HEAD> - <META NAME="GENERATOR" CONTENT="SGML-Tools 1.0.9"> - <TITLE>xindy Manual: References</TITLE> - <LINK HREF="manual-6.html" REL=previous> - <LINK HREF="manual.html#toc7" REL=contents> -</HEAD> -<BODY> -Next -<A HREF="manual-6.html">Previous</A> -<A HREF="manual.html#toc7">Contents</A> -<HR> -<H2><A NAME="s7">7. References</A></H2> - -<P> -<P>The following books and papers were referenced in this document. -<P> -<OL> -<LI> D. E. Knuth, <EM>The TeXbook</EM>, Addison-Wesley, 1984 -</LI> -<LI> Leslie Lamport, LaTeX <EM>A Document Preparation System</EM>, -Addison-Wesley, 1986 -</LI> -<LI> Joachim Schrod, <EM>An International Version of MakeIndex</EM>, -Cahiers GUTenberg, 10, p81-90, 1991 -</LI> -<LI> Pehong Chen and Michael A. Harrison, <EM>Automating Index -Preparation</EM>, TR-87/347, University of California Berkeley, 1987 -<A NAME="makeindex"></A> -</LI> -<LI> Roger Kehr, <SF>xindy</SF>, <EM>Ein Flexibles Indexierungssystem</EM>, -Studienarbeit FB Informatik, TH-Darmstadt, November 1995. -</LI> -<LI> Joachim Schrod and Gabor Herr, <EM>MakeIndex Version 3.0</EM>, -Technical University Darmstadt, 1991 -</LI> -<LI> Roger Kehr, <SF>xindy</SF> -- <EM>A Flexible Indexing System</EM>, -Technical Report No. 11/1997, Computer Science Department, Darmstadt -University of Technology, 1997. Also accessible from the <SF>xindy</SF> -homepage. -</LI> -<LI> Roger Kehr, <SF>xindy</SF> -- <EM>A Flexible Indexing System</EM>, -Proceedings of the EuroTeX'98, St. Malo, France, March 1998 -</LI> -</OL> -<P> -<HR> -Next -<A HREF="manual-6.html">Previous</A> -<A HREF="manual.html#toc7">Contents</A> -</BODY> -</HTML> diff --git a/Build/source/utils/xindy-old/doc/manual.html b/Build/source/utils/xindy-old/doc/manual.html deleted file mode 100644 index 344b0e19cab..00000000000 --- a/Build/source/utils/xindy-old/doc/manual.html +++ /dev/null @@ -1,73 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN"> -<HTML> -<HEAD> - <META NAME="GENERATOR" CONTENT="SGML-Tools 1.0.9"> - <TITLE>xindy Manual</TITLE> - <LINK HREF="manual-1.html" REL=next> - - -</HEAD> -<BODY> -<A HREF="manual-1.html">Next</A> -Previous -Contents -<HR> -<H1><SF>xindy</SF> Manual</H1> - -<H2>Roger Kehr</H2> -<H3>Computer Science Department, Technical University of Darmstadt</H3> - and -<H2>Joachim Schrod</H2> -<H3>Joachim Schrod Net & Publication Consultance GmbH</H3> -$Revision: 1.19 $, $Date: 2004/05/24 21:43:16 $, -for xindy version 2.2 -<P><HR> -<EM>This is the manual of the indexing system <SF>xindy</SF>. <SF>xindy</SF> -is a powerful and flexible framework for generating indexes for many -kinds of documents. This document describes the <SF>xindy</SF> processing -model, terminology, and language, but not invocation and standard modules. -The most up-to-date version can be obtained from the <SF>xindy</SF> Web Site at -<A HREF="http://www.xindy.org/">http://www.xindy.org/</A>.</EM> -<HR> -<P> -<A HREF="manual-5.html#INDEX">Index of all xindy commands</A><P> -<P> -<P> -<P> -<H2><A NAME="toc1">1.</A> <A HREF="manual-1.html">About this Manual</A></H2> - -<P> -<H2><A NAME="toc2">2.</A> <A HREF="manual-2.html">How the Index Processor Works</A></H2> - -<UL> -<LI><A HREF="manual-2.html#ss2.1">2.1 Data Flow</A> -<LI><A HREF="manual-2.html#ss2.2">2.2 General Concepts and Terms</A> -</UL> -<P> -<H2><A NAME="toc3">3.</A> <A HREF="manual-3.html">Command List</A></H2> - -<UL> -<LI><A HREF="manual-3.html#ss3.1">3.1 Processing Commands</A> -<LI><A HREF="manual-3.html#ss3.2">3.2 Markup Commands</A> -<LI><A HREF="manual-3.html#ss3.3">3.3 Raw Index Interface</A> -</UL> -<P> -<H2><A NAME="toc4">4.</A> <A HREF="manual-4.html">Processing Phases</A></H2> - -<UL> -<LI><A HREF="manual-4.html#ss4.1">4.1 The Startup Phase</A> -<LI><A HREF="manual-4.html#ss4.2">4.2 The Processing Phase</A> -<LI><A HREF="manual-4.html#ss4.3">4.3 The Markup Phase</A> -</UL> -<P> -<H2><A NAME="toc5">5.</A> <A HREF="manual-5.html">Index</A></H2> - -<P> -<H2><A NAME="toc6">6.</A> <A HREF="manual-6.html">References</A></H2> - -<HR> -<A HREF="manual-1.html">Next</A> -Previous -Contents -</BODY> -</HTML> diff --git a/Build/source/utils/xindy-old/doc/mappings.gif b/Build/source/utils/xindy-old/doc/mappings.gif Binary files differdeleted file mode 100644 index be58722f4d9..00000000000 --- a/Build/source/utils/xindy-old/doc/mappings.gif +++ /dev/null diff --git a/Build/source/utils/xindy-old/doc/style-tutorial-1.html b/Build/source/utils/xindy-old/doc/style-tutorial-1.html deleted file mode 100644 index 890b1ecd8b9..00000000000 --- a/Build/source/utils/xindy-old/doc/style-tutorial-1.html +++ /dev/null @@ -1,92 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN"> -<HTML> -<HEAD> - <META NAME="GENERATOR" CONTENT="SGML-Tools 1.0.9"> - <TITLE>XINDY Style File Tutorial: About xindy</TITLE> - <LINK HREF="style-tutorial-2.html" REL=next> - - <LINK HREF="style-tutorial.html#toc1" REL=contents> -</HEAD> -<BODY> -<A HREF="style-tutorial-2.html">Next</A> -Previous -<A HREF="style-tutorial.html#toc1">Contents</A> -<HR> -<H2><A NAME="s1">1. About <SF>xindy</SF></A></H2> - -<P><SF>xindy</SF> means fle<B>x</B>ible <B>ind</B>exing s<B>y</B>stem. It is an -indexing system that can be used to generate book-like indexes for -arbitrary document preparation systems. This term includes systems -such as TeX [1] and LaTeX [2], the Nroff-family -or SGML-based systems (e.g. HTML) that process some kind of text and -generate indexing information. It is not fixed to any specific system, -but can be configured for a wide variety of purposes. -<P>Authors sometimes wish to include an index into their document, but -very often their document preparation systems aren't able to produce -indexes on their own, or the capabilities of the built-in indexers are -insufficient and produce ugly looking results. More often they use -separate specialized tools for this purpose, sometimes called -<EM>index processors</EM>. -<P>In comparison to other index processors <SF>xindy</SF> has several -powerful features that make it an ideal framework for describing and -generating complex indexes. Its most interesting features are -<P> -<DL> -<P> -<DT><B>Internationality</B><DD><P><SF>xindy</SF> can be configured to process indexes -for many languages with different letter sets and different sorting -rules. For example, many roman languages such as Italian, French, -Portuguese or Spanish contain accentuated letters such as À, -Á, ñ. Other languages from northern Europe have letters -like Ä, Ø, æ or ß which often can't even be -processed by many index processors let alone sorting them correctly -into an index. The <SF>xindy</SF> system can be configured to process -these alphabets by defining <EM>sort</EM> and <EM>merge rules</EM> that allow -expressing language specific rules. One example of such a rule would -be -<P> -<BLOCKQUOTE><CODE> -<PRE> -(sort-rule "ä" "ae") -</PRE> -</CODE></BLOCKQUOTE> -<P>defining that a word containing the umlaut-a will be sorted as if it -contained the letters <CODE>ae</CODE> instead. This is one form of how the -umlaut-a ("ä") is sorted into german indexes. With an appropriate set -of rules on can express the complete rules of a specific language. -<P> -<DT><B>User Definable Location Types</B><DD><P>Locations are the entities an -index entry points to. Often used locations are <EM>page numbers</EM>, -<EM>section numbers</EM>, etc. <SF>xindy</SF> allows to define new kinds of -types to be composed of basic entities like arabic numbers, roman -numerals, letters, etc. which can be used to describe new index types. -Examples of these entities can be books that have a page numbering -scheme that starts from 1 for each new chapter resulting in page -numbers of the form <EM>1-13, 2-15, 2-20</EM>, etc. This type of locations -can often be found in computer manuals. A more complex structure is -represented by the locations <EM>Psalm 46, 1-8</EM> and <EM>Genesis 1, -31</EM>. Even the structure of bible verses can be described allowing -<SF>xindy</SF> to correctly sort and process indexes for documents with a -completely different structure. -<P> -<DT><B>Highly Configurable Markup</B><DD><P>Since a index processor is only one -component in a document preparation system it ought to fit smoothly -into the complete environment. Many text processing systems use the -concept of <EM>environments</EM> that can be used to describe the markup -of the text entities. Our approach is based on this concept which has -proved to be expressive enough for most applications. As an example -one can view systems such as TeX, SGML and its instance HTML, GNU -Info, RTF and the Nroff-familiy of document formatters. The markup of -an index can be defined for all of these systems in a very comfortable -though extremly powerful way. -<P> -</DL> -<P> -<P> -<P> -<HR> -<A HREF="style-tutorial-2.html">Next</A> -Previous -<A HREF="style-tutorial.html#toc1">Contents</A> -</BODY> -</HTML> diff --git a/Build/source/utils/xindy-old/doc/style-tutorial-2.html b/Build/source/utils/xindy-old/doc/style-tutorial-2.html deleted file mode 100644 index b5313e59d72..00000000000 --- a/Build/source/utils/xindy-old/doc/style-tutorial-2.html +++ /dev/null @@ -1,361 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN"> -<HTML> -<HEAD> - <META NAME="GENERATOR" CONTENT="SGML-Tools 1.0.9"> - <TITLE>XINDY Style File Tutorial: A Basic Introduction</TITLE> - <LINK HREF="style-tutorial-3.html" REL=next> - <LINK HREF="style-tutorial-1.html" REL=previous> - <LINK HREF="style-tutorial.html#toc2" REL=contents> -</HEAD> -<BODY> -<A HREF="style-tutorial-3.html">Next</A> -<A HREF="style-tutorial-1.html">Previous</A> -<A HREF="style-tutorial.html#toc2">Contents</A> -<HR> -<H2><A NAME="s2">2. A Basic Introduction</A></H2> - -<P>This section incrementally introduces the most important aspects of -the system. After reading this chapter you should be able to specify -style files for -about 80% of the commonly used indexes. The examples are demonstrated -with a TeX markup so one can easily typeset the results <SF>xindy</SF> -produces. You need LaTeX and the ISO-Latin enhancements that come -with the <CODE>inputenc</CODE> package to run the following examples. Also the -<SF>xindy</SF> system must already be installed. -<P> -But this tutorial doesn't reflect real life any more. The concepts are -introduced below to explain them, but actual usage is probably -different. In particular, you should not expect to specify sort rules -by hand; usually one uses the language modules for that. Same way, -xindy standard modules provide lots of markup functionality that you -need for your documents, and can be used as a starting point. -Nevertheless, let's continue with the explanation of <sf>xindy</sf>'s -style file language. -<P> -<H2><A NAME="ss2.1">2.1 Running <SF>xindy</SF></A> -</H2> - -<P>Create a new directory somewhere and copy some files from the -distribution directory <CODE>doc/style-tutorial/</CODE> by typing -<P> -<BLOCKQUOTE><CODE> -<PRE> -eg$ mkdir tutorial -eg$ cd tutorial -eg$ cp <distrib-dir>/doc/style-tutorial/*.raw . -eg$ cp <distrib-dir>/doc/style-tutorial/*.tex . -</PRE> -</CODE></BLOCKQUOTE> -<P>with <CODE>distrib-dir</CODE> replaced by the actual location. Now create a -file <CODE>style1.xdy</CODE> with the following content: -<P> -<BLOCKQUOTE><CODE> -<PRE> -;; This is a first example using `xindy'. - -(define-location-class "page-numbers" ("arabic-numbers")) -(define-attributes (("definition" "usage"))) -</PRE> -</CODE></BLOCKQUOTE> -<P>Now run <SF>xindy</SF> by typing -<P> -<BLOCKQUOTE><CODE> -<PRE> -eg$ xindy -t ex1.xlg -M style1 -I xindy ex1.raw -</PRE> -</CODE></BLOCKQUOTE> -<P>You should see something like -<P> -<BLOCKQUOTE><CODE> -<PRE> -Opening logfile "ex1.xlg" (done) -Reading indexstyle... -Loading module "style1.xdy"... -Finished loading module "style1.xdy". -Finished reading indexstyle. -Finalizing indexstyle... (done) - -Reading raw-index "ex1.raw"... -Finished reading raw-index. - -Processing index... [10%] [20%] [30%] [40%] [50%] [60%] [70%] [80%] [90%] [100%] -Finished processing index. - -Writing markup... [10%] [20%] [30%] [40%] [50%] [60%] [70%] [80%] [90%] [100%] -Markup written into file "ex1.ind". -</PRE> -</CODE></BLOCKQUOTE> -<P><SF>xindy</SF> has now successfully compiled the index <CODE>ex1.raw</CODE> using -your index style <CODE>style1.xdy</CODE>. The result is now stored in file -<CODE>ex1.ind</CODE>. You can view this file but currently it only contains an -unreadable mix of data. -<P>But now let's come back to our index style. The syntax of the command -is in a Lisp-like form with lots of braces, looking a little bit -weird, but you'll soon get used to it. What is the meaning of the two -commands we specified? The first command informed <SF>xindy</SF> that we -like to process page numbers. We do this by defining a new -<EM>location class</EM> named <CODE>page-numbers</CODE>. The page numbers consist -of <CODE>arabic-numbers</CODE> as we might expect but this is not necessarily -true---imagine your page numbers consisted of roman numerals instead. -When reading the <EM>raw index</EM> contained in file <CODE>ex1.raw</CODE> -<SF>xindy</SF> checks all locations if they match all known location -classes. Since in our example the only known location class is the -class of page numbers which are written using arabic digits, all -locations will be checked if they are correct page numbers. -<P>The second command tells <SF>xindy</SF> that we use two types of -attributes for location references. Most often the locations in an -index denote different meanings. For example, in mathematical texts -one will distinguish the <EM>definition</EM> of a mathematical term from -its <EM>usage</EM>. Sometimes these are typeset using different font -shapes such as <EM>italic</EM> or font series such as <B>boldface</B>. Each -location has an associated attribute which, if it is unspecified, -defaults to the attribute <CODE>default</CODE>. With this command you have -made these attributes known to the system, which makes it possible to -assign different markup to these attributes later on. -<P> -<P> -<H2><A NAME="ss2.2">2.2 Adding some Markup</A> -</H2> - -<P>Until now you haven't seen something exciting, so its time to specify -some markup. Add the following lines to our index style: -<P> -<BLOCKQUOTE><CODE> -<PRE> -(markup-index :open "~n\begin{theindex}~n" - :close "~n\end{theindex}~n" - :tree) - -(markup-locref :class "page-numbers" :attr "definition" - :open "{\bf " :close "}") - -(markup-locclass-list :open "\quad{}") -(markup-locref-list :sep ", ") -</PRE> -</CODE></BLOCKQUOTE> -<P>Now run <SF>xindy</SF> again and afterwards LaTeX: -<P> -<BLOCKQUOTE><CODE> -<PRE> -eg$ xindy -t ex1.xlg -M style1 -I xindy ex1.raw -eg$ latex ex1.tex -</PRE> -</CODE></BLOCKQUOTE> -<P>You can view <CODE>ex1.dvi</CODE> with your prefered viewer (maybe <CODE>xdvi</CODE> -or something else) to get a first impression of your results. Maybe -your are not satisfied (for sure you aren't), because it still looks -very confusing. What did the above rules tell <SF>xindy</SF>? When you -view the file <CODE>ex1.ind</CODE> which is the result <SF>xindy</SF> generates, -you'll recognize some of the <EM>markup tags</EM> you specified. The -following is an excerpt of this file: -<P> -<BLOCKQUOTE><CODE> -<PRE> -\begin{theindex} - academia\quad{}{\bf 1}acafetado\quad{}{\bf 2}acalmar\quad{}{\bf 4} - açafrão\quad{}{\bf 3}indexflat\quad{}1hierarchical\quad{}2 - veryhierarchical\quad{}3impressive\quad{}4saber\quad{}{\bf 7} - sabor\quad{}{\bf 8}sabão\quad{}{\bf 6}sábado\quad{}{\bf 5} -\end{theindex} -</PRE> -</CODE></BLOCKQUOTE> -<P>First of all you'll see that the file starts with the string -<CODE>\begin{theindex}</CODE> and ends with <CODE>\end{theindex}</CODE>. -Additionally some locations are correctly enclosed into a TeX macro -that typesets them in shape boldface, whereas others aren't. The -boldface ones are all those locations from the raw index that have the -attribute <CODE>definition</CODE>. -<P>The <CODE>:open</CODE> and <CODE>:close</CODE> keyword arguments each take a string as -argument. The first one is written to the file when <EM>opening</EM> an -enviroment, whereas the latter one <EM>closes</EM> an environment. What we -have specified is the markup for the whole index (which is actually -printed only once) and the markup for all locations of class -<CODE>page-numbers</CODE> which own the attribute <CODE>definition</CODE>. Here we -have cleanly separated the structured markup from the visual one, -allowing an easy redefinition if we decide, for example, to markup the -<CODE>definition</CODE>-locations in italics instead of boldface. -<P>Some words on <EM>keyword arguments</EM> and <EM>switches</EM>. Keyword -arguments such as <CODE>:open</CODE> or <CODE>:close</CODE> always take exactly one -argument which must be positioned right after the keyword separated by -a whitespace (a blank or a tab-stop). Switches don't take any -arguments. For example, <CODE>:tree</CODE> in the command <CODE>markup-index</CODE> is -a switch and thus it does not take an argument. We will use this -terminology throughout the rest of this document. -<P>The third command caused <SF>xindy</SF> to insert a horizontal space -between the keyword and the locations (the TeX command -<CODE>\quad{}</CODE> simply inserts a specific horizontal space). The last -command caused <SF>xindy</SF> to separate all location references from -each other with a comma followed by a blank, independently of any -location class. -<P>As you already may have observed, the tilde sign (<CODE>~</CODE>) serves -as a <EM>quoting character</EM>. -<P>We continue specifying markup to get a printable result by adding more -markup: -<P> -<BLOCKQUOTE><CODE> -<PRE> -(markup-indexentry :open "~n \item " :depth 0) -(markup-indexentry :open "~n \subitem " :depth 1) -(markup-indexentry :open "~n \subsubitem " :depth 2) -</PRE> -</CODE></BLOCKQUOTE> -<P>This assigns different markup for the different hierarchy layers of -the indexentries. Our index is hierarchically organized. It contains -items which themselves contain more sub-items which also might contain -sub-sub-items. Each layer is started by a different markup which is -correctly assigned with the <CODE>:depth</CODE> keyword argument. The layers -are numbered by their <EM>depth</EM> starting from zero. -<P>Now run <SF>xindy</SF> and TeX again and enjoy your first index. It's -easy, isn't it! The output <CODE>ex1.ind</CODE> looks like the following: -<P> -<BLOCKQUOTE><CODE> -<PRE> -\begin{theindex} - - \item academia\quad{}{\bf 1} - \item acafetado\quad{}{\bf 2} - \item acalmar\quad{}{\bf 4} - \item açafrão\quad{}{\bf 3} - \item index - \subitem flat\quad{}1 - \subitem hierarchical\quad{}2 - \subitem very - \subsubitem hierarchical\quad{}3 - \subsubitem impressive\quad{}4 - \item saber\quad{}{\bf 7} - \item sabor\quad{}{\bf 8} - \item sabão\quad{}{\bf 6} - \item sábado\quad{}{\bf 5} - -\end{theindex} -</PRE> -</CODE></BLOCKQUOTE> -<P>Hmm, as you might have seen there are several problems that need -further investigation. The index contains some Portuguese words that -are printed correctly but should appear at other positions inside the -index. For instance, the word <EM>sábado</EM> should appear before the -word <EM>saber</EM> since <EM>á</EM> must be sorted as if it were simply an -<EM>a</EM>. The reason why these words are not sorted correctly is -simple---the accentuated letters have codes beyond position 128 in the -ISO-Latin alphabet. Sorting based on these codes yields this incorrect -order. -<P>What to do? We can define for each of the words containing these -special characters an explicit <EM>print key</EM>. The print key describes -the printed representation of the keyword whereas the <EM>key</EM> or -<EM>main key</EM> is used for sorting and merging. A very tedious task -which is not a very clever solution since in a non-english language -many many words contain these special cases. We follow the way -<SF>xindy</SF> offers: <EM>keyword-mappings</EM>. -<P> -<H2><A NAME="ss2.3">2.3 Keyword Mappings</A> -</H2> - -<P>What are keyword mappings for? A good question. I'll try to give some -answers. -<P> -<UL> -<LI> <EM>Merging of differently written words</EM>. Some text formatting -systems allow different writings for the same word. For example, TeX -can be used with ISO-Latin characters as well as with its own -character sequences. If a document is composed from smaller ones -possibly written by different authors using different forms of writing -the index entries, the same terms may happen to be written differently -and consequently we need a mechanism to identify them as equal. -</LI> -<LI> <EM>Specifying the sort order</EM>. As outlined in the previous -section it is really difficult and error-prone to specify the sort key -for each keyword explicitly. Sometimes the sort order is even -different for the type of the document, as it happens in German, where -two different types of sortings exist, one for everyday indexes and -one for dictionaries. The sort order actually defines the position of -arbitrary language-specific letters inside of an index. -</LI> -</UL> -<P>A detailed elaboration of these ideas can be found in the paper <EM>An -International Version of MakeIndex</EM> by Joachim Schrod [3]. -It describes the ideas that led to modifications on one of the -ancestors of the <SF>xindy</SF> system: <CODE>makeindex</CODE> [4]. -<P>The keyword mappings are as follows. The <EM>merge key</EM> is generated -from the <EM>main key</EM> with the so called <EM>merge mapping</EM>. The -merge mapping can be specified with the command <CODE>merge-rule</CODE>. The -<EM>sort key</EM> is derived from the merge key using the <EM>sort -mapping</EM> specified with the <CODE>sort-rule</CODE> command. The following -scheme shows this mapping process: -<P> -<FIGURE> -<EPS FILE="mappings.eps"> -<IMG SRC="mappings.gif"> -</FIGURE> -<P> -<P>We will use this command now to define a suitable sort mapping that -fits our needs: -<P> -<BLOCKQUOTE><CODE> -<PRE> -(sort-rule "à" "a") -(sort-rule "á" "a") -(sort-rule "ã" "a") -(sort-rule "è" "e") -(sort-rule "é" "e") -(sort-rule "ç" "c") -</PRE> -</CODE></BLOCKQUOTE> -<P>These rules define mappings from a keyword to a <EM>normalized</EM> -version. In the logfile <CODE>ex1.xlg</CODE> these transformations are logged so -that one can see how these mappings are performed. In this example we -do not need any <CODE>merge-rule</CODE> but we will see applications in -further examples. -<P>Running <SF>xindy</SF> and TeXing the result now places the indexentries -at the right positions. -<P>In reality, such sort rules tend to be much more complex, due to -the idiosynchrasies of sorting natural languages. Sort rules for -many languages are available as part of the xindy distribution, as -so-called language modules. We specify the language with the option -<code>-L</code>, e.g., in our example we could have used -<BLOCKQUOTE><CODE> -<PRE> -eg$ xindy -t ex1.xlg -M style1 -L portuguese -I xindy ex1.raw -</PRE> -</CODE></BLOCKQUOTE> -<P>If we use one of the available language modules, sort rules in -user-written xindy styles are ignored. -<P>The result is now quite satisfying if the index entries weren't -clumped together that much. We usually want the different index -entries beginning with the same letter be optically separated from the -ofhers. This improves readability and there must be a way to -accomplish this---the <EM>letter groups</EM>. -<P> -<H2><A NAME="ss2.4">2.4 Letter Groups</A> -</H2> - -<P>To group indexentries we must define what indexentries form a group. -The clustering is done by matching the keywords' prefixes (taken from -the <EM>sort key</EM>) with a user-defined table of prefixes and define -appropriate markup that separates the groups from each other. Here it -goes. -<P> -<BLOCKQUOTE><CODE> -<PRE> -(define-letter-groups - ("a" "b" "c" "d" "e" "f" "g" "h" "i" "j" "k" "l" "m" - "n" "o" "p" "q" "r" "s" "t" "u" "v" "w" "x" "y" "z")) - -(markup-letter-group-list :sep "~n\indexspace") -</PRE> -</CODE></BLOCKQUOTE> -<P>This defines the given list of letter groups. When forming the letter -groups, each letter group is checked if it matches a prefix of the -indexentries' sort key. The longest match assigns the index entry to -this letter group. If no match was possible the index entry is put into -group <CODE>default</CODE>. -<P>The result now looks much better than before. You have now learned the -basic features that you need to specify everyday indexes. In the next -chapter we'll continue to make you an expert in indexing. -<P> -<P> -<HR> -<A HREF="style-tutorial-3.html">Next</A> -<A HREF="style-tutorial-1.html">Previous</A> -<A HREF="style-tutorial.html#toc2">Contents</A> -</BODY> -</HTML> diff --git a/Build/source/utils/xindy-old/doc/style-tutorial-3.html b/Build/source/utils/xindy-old/doc/style-tutorial-3.html deleted file mode 100644 index 5c598e54938..00000000000 --- a/Build/source/utils/xindy-old/doc/style-tutorial-3.html +++ /dev/null @@ -1,263 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN"> -<HTML> -<HEAD> - <META NAME="GENERATOR" CONTENT="SGML-Tools 1.0.9"> - <TITLE>XINDY Style File Tutorial: Advanced Features</TITLE> - <LINK HREF="style-tutorial-4.html" REL=next> - <LINK HREF="style-tutorial-2.html" REL=previous> - <LINK HREF="style-tutorial.html#toc3" REL=contents> -</HEAD> -<BODY> -<A HREF="style-tutorial-4.html">Next</A> -<A HREF="style-tutorial-2.html">Previous</A> -<A HREF="style-tutorial.html#toc3">Contents</A> -<HR> -<H2><A NAME="s3">3. Advanced Features</A></H2> - -<P>In the following sections you'll learn more about the features of -<SF>xindy</SF>. We'll show you how you can define your own -location classes, specify the letter groups in more detail and bring -you close to more specfic markup features. After reading this chapter -you should be able to master about 95% of the commonly used indexes. -<P> -<P> -<H2><A NAME="ss3.1">3.1 Location Classes</A> -</H2> - -<P>We continue using a more complex index. Copy the current style to a -new file (now <CODE>style2.xdy</CODE>) and run <SF>xindy</SF> on the raw index -<CODE>ex2.raw</CODE> by typing: -<P> -<BLOCKQUOTE><CODE> -<PRE> -eg$ cp style1.xdy style2.xdy -eg$ xindy -t ex2.xlg -M style2 -I xindy ex2.raw -</PRE> -</CODE></BLOCKQUOTE> -<P>You should see some error messages indicating that something is -unknown to <SF>xindy</SF>. What has happend? The messages should be -similar to the following snapshot: -<P> -<BLOCKQUOTE><CODE> -<PRE> - ... -WARNING: -location-reference "B-5" did not match any location-class! (ignored) -WARNING: -location-reference "C-8" did not match any location-class! (ignored) -WARNING: -location-reference "iv" did not match any location-class! (ignored) -WARNING: -location-reference "ii" did not match any location-class! (ignored) - ... -</PRE> -</CODE></BLOCKQUOTE> -<P>The index contains new, and therefore unknown, location classes. The -first one has an appendix-like style, whereas the second one seems to -be lowercase roman numerals. <SF>xindy</SF> reported, that it doesn't know -these locations and therefore knows nothing about their internal -structure. We make them known to the system by adding the following -commands to the style file. -<P> -<BLOCKQUOTE><CODE> -<PRE> -(define-location-class "roman-pages" ("roman-numerals-lowercase")) -(define-location-class "appendices" ("ALPHA" :sep "-" "arabic-numbers")) -(define-location-class-order ("roman-pages" "appendices")) -</PRE> -</CODE></BLOCKQUOTE> -<P>The first command tells <SF>xindy</SF> that there exist some page numbers -that are written with roman lowercase letters. The second one defines -the structure of the appendix locations. They consist of three -elements, a capital letter, a separator---which is a hyphen in our -case---and finally an arabic number. To be able to correctly -distinguish separator strings from the names of the known -<EM>basetypes</EM>, the argument <CODE>:sep</CODE> indicates, that the following -is a separator. The last command simply says that the locations which -are roman numerals shall appear before the appendix locations. So far -we know three different basetypes. The built-in basetypes of -<SF>xindy</SF> are: -<P> -<DL> -<DT><B><CODE>arabic-numbers</CODE></B><DD><P>contains all non-negative numbers beginning -with zero: 0, 1, 2, .... -<P> -<DT><B><CODE>roman-numerals-uppercase</CODE>, <CODE>roman-numerals-lowercase</CODE></B><DD><P>the -roman numerals I, II, III, (IIII/IV), V, ... It contains the old and -new roman numeral system. Two versions for uppercase and lowercase -letters are supported. -<P> -<DT><B><CODE>ALPHA</CODE>, <CODE>alpha</CODE></B><DD><P>The US-ASCII alphabet letters (uppercase -and lowercase letters). -<P> -<DT><B><CODE>digits</CODE></B><DD><P>the digits 0, 1, 2, 3, 4, 5, 6, 7, 8 and 9 in this -order. -</DL> -<P>`Fine,', you'll say, `but what if my basetypes are completely -different?' You're right! But <SF>xindy</SF> offers you to define your own -alphabets. For example, you can define a new alphabet by writing -<P> -<BLOCKQUOTE><CODE> -<PRE> -(define-alphabet "my-personal-alphabet" ("Hi" "ho" "here" "I" "go")) -</PRE> -</CODE></BLOCKQUOTE> -<P>This is a valid alphabet that consists of 5 <EM>letters</EM>. You can now -define a location class -<P> -<BLOCKQUOTE><CODE> -<PRE> -(define-location-class "my-personal-class" - ("my-personal-alphabet" :sep "-" "arabic-numbers")) -</PRE> -</CODE></BLOCKQUOTE> -<P>to match all of the following locations: <EM>Hi-12, ho-2, here-709, -I-9, go-42</EM>. <SF>xindy</SF> will recognize them and be able to sort them -according to your specification which says that <EM>Hi</EM> comes before -all others and <EM>here</EM> is exactly at the third position. So they -will be sorted lexicographically, layer by layer, until it can decide -which one is before or after the other. We have prepared a concrete -example. Do you remember the example we gave when we spoke about -indexing bible verses? This exactly matches the situation of such a -self-defined alphabet which could look like the following definitions: -<P> -<BLOCKQUOTE><CODE> -<PRE> -(define-alphabet "bible-chapters" - ("Genesis" "Exodus" "Leviticus" "Numbers" "Deuteronomy" - ... )) -(define-location-class "bible-verses" - ("bible-chapters" :sep " " "arabic-numbers" :sep "," "arabic-numbers")) -</PRE> -</CODE></BLOCKQUOTE> -<P>This description would match locations like <EM>Genesis 1,3</EM>, -<EM>Exodus 7,8</EM>, etc. -<P>Now run LaTeX on <CODE>ex2.tex</CODE> and view the results. It looks a -little bit strange since <SF>xindy</SF> has automatically built ranges of -successive locations. The first locations of the index entry <EM>roman</EM> -actually denote the range <EM>ii</EM> until <EM>iv</EM>. <EM>Ranges</EM> consist -of location references. To typeset them correctly you can specify -<P> -<BLOCKQUOTE><CODE> -<PRE> -(markup-range :sep "--") -</PRE> -</CODE></BLOCKQUOTE> -<P>This indicates that location reference forming a range shall be -separated by a hyphen. Running <SF>xindy</SF> and LaTeX again gives a -better idea of how it should look like. Here is a part of the -generated output. -<P> -<BLOCKQUOTE><CODE> -<PRE> - ... - \item appendices\quad{}A-1, A-7, A-11, B-3--B-5, C-1, C-8, C-12, - C-13, C-22, D-2, D-3, D-5, D-10 - ... -</PRE> -</CODE></BLOCKQUOTE> -<P> -<H2><A NAME="ss3.2">3.2 Hierarchical Location Classes</A> -</H2> - -<P>Somehow a lot of space is wasted when looking at the first index entry. -Modify the definition of the location class for appendices as follows -and add the other commands as well: -<P> -<BLOCKQUOTE><CODE> -<PRE> -(define-location-class "appendices" - ("ALPHA" :sep "-" "arabic-numbers") - :hierdepth 2) -(markup-locref-list :sep "; " :depth 0 :class "appendices") -(markup-locref-list :open "~~" :sep ", " :depth 1 :class "appendices") -</PRE> -</CODE></BLOCKQUOTE> -<P><EM>Note: Since the tilde character serves as our quoting character it -must be quoted itself in the above example.</EM> Run <SF>xindy</SF> and view -the output stored in <CODE>ex2.ind</CODE>. The output looks similar to the -following: -<P> -<BLOCKQUOTE><CODE> -<PRE> - ... - \item appendices\quad{}A~1, 7, 11; B~3--5; C~1, 8, 12, 13, 22; - D~2, 3, 5, 10 - ... -</PRE> -</CODE></BLOCKQUOTE> -<P>You can see that the location references of this class have been -transformed into a hierarchical structure caused by the -<CODE>:hierdepth</CODE> argument. Additionally we have specified markup for -the layers of this class separately for the depths 0 and 1. The -locations at depth 0 are separated by a `;' whereas the ones at depth -1 are separated by a `,'. -<P>Maybe you get an impression why we named <SF>xindy</SF> a <EM>flexible</EM> -system. -<P> -<H2><A NAME="ss3.3">3.3 More about Letter Groups</A> -</H2> - -<P>More problems arise when using languages with different letter -schemes. Hungarian is an example. In Hungarian indexes the words -beginning with the letters <EM>Cs, Ly, Ny</EM> and more are printed in a -separate block. The words beginning with <EM>Ly</EM>, for example, appear -behind the words beginning with an <EM>L</EM>. <SF>xindy</SF> allows to define -this kind of letter groups as well. Add the following lines to the -style file. -<P> -<BLOCKQUOTE><CODE> -<PRE> -(define-letter-group "ly" :after "l" :before "m") -(define-letter-group "ny" :after "n" :before "o") - -(markup-letter-group :open-head "~n {\bf " :close-head "}" - :capitalize) -</PRE> -</CODE></BLOCKQUOTE> -<P>The result looks like the following: -<P> -<P> -<BLOCKQUOTE><CODE> -<PRE> - ... - {\bf Ly} - \item lyuk\quad{}1 - \item lyukas\quad{}2 - - \indexspace - - {\bf M} - \item maga\quad{}1 - \item magyar\quad{}2 - - \indexspace - - {\bf N} - \item nagy\quad{}1 - \item nagyon\quad{}9 - \item nègy\quad{}4 - - \indexspace - - {\bf Ny} - \item nyelv\quad{}1 - \item nyolc\quad{}8 - ... -</PRE> -</CODE></BLOCKQUOTE> -<P>The result describes what the purpose of the above commands is. It -becomes prettier from step to step, doesn't it? -<P>You have now learned most of the features of <SF>xindy</SF>. Go playing -around a little bit. For a detailed description of all commands and -all their arguments and switches you should reference the manual that -comes with this distribution. -<P> -<P> -<P> -<HR> -<A HREF="style-tutorial-4.html">Next</A> -<A HREF="style-tutorial-2.html">Previous</A> -<A HREF="style-tutorial.html#toc3">Contents</A> -</BODY> -</HTML> diff --git a/Build/source/utils/xindy-old/doc/style-tutorial-4.html b/Build/source/utils/xindy-old/doc/style-tutorial-4.html deleted file mode 100644 index f3ef19aa4c8..00000000000 --- a/Build/source/utils/xindy-old/doc/style-tutorial-4.html +++ /dev/null @@ -1,41 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN"> -<HTML> -<HEAD> - <META NAME="GENERATOR" CONTENT="SGML-Tools 1.0.9"> - <TITLE>XINDY Style File Tutorial: References</TITLE> - <LINK HREF="style-tutorial-3.html" REL=previous> - <LINK HREF="style-tutorial.html#toc4" REL=contents> -</HEAD> -<BODY> -Next -<A HREF="style-tutorial-3.html">Previous</A> -<A HREF="style-tutorial.html#toc4">Contents</A> -<HR> -<H2><A NAME="s4">4. References</A></H2> - -<P> -<P>The following books and papers were referenced in this document. -<P> -<OL> -<LI> D. E. Knuth, <EM>The TeXbook</EM>, Addison-Wesley, 1984 -</LI> -<LI> Leslie Lamport, LaTeX <EM>A Document Preparation System</EM>, -Addison-Wesley, 1986 -</LI> -<LI> Joachim Schrod, <EM>An International Version of MakeIndex</EM>, -Cahiers GUTenberg, 10, p81-90, 1991 -</LI> -<LI> Pehong Chen and Michael A. Harrison, <EM>Automating Index -Preparation</EM>, TR-87/347, University of California Berkeley, 1987 -<A NAME="makeindex"></A> -</LI> -<LI> Roger Kehr, <SF>xindy</SF>, <EM>Ein Flexibles Indexierungssystem</EM>, -Studienarbeit FB Informatik, TH-Darmstadt, November 1995.</LI> -</OL> -<P> -<HR> -Next -<A HREF="style-tutorial-3.html">Previous</A> -<A HREF="style-tutorial.html#toc4">Contents</A> -</BODY> -</HTML> diff --git a/Build/source/utils/xindy-old/doc/style-tutorial.html b/Build/source/utils/xindy-old/doc/style-tutorial.html deleted file mode 100644 index 6c815ca30d6..00000000000 --- a/Build/source/utils/xindy-old/doc/style-tutorial.html +++ /dev/null @@ -1,66 +0,0 @@ -<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 3.2 Final//EN"> -<HTML> -<HEAD> - <META NAME="GENERATOR" CONTENT="SGML-Tools 1.0.9"> - <TITLE>XINDY Style File Tutorial</TITLE> - <LINK HREF="style-tutorial-1.html" REL=next> - - -</HEAD> -<BODY> -<A HREF="style-tutorial-1.html">Next</A> -Previous -Contents -<HR> -<H1>XINDY Style File Tutorial</H1> - -<H2><SF>A Flexible Indexing System</SF></H2> -<H2>Roger Kehr</H2> -<H3>Computer Science Department, Technical University of Darmstadt</H3> - and -<H2>Joachim Schrod</H2> -<H3>Joachim Schrod Net & Publication Consultance GmbH</H3> -Tutorial, Edition March 1997 for xindy version 1.1 -<P><HR> -<EM> This is a tutorial on writing style files for -the <SF>xindy</SF> indexing system -[5]. <SF>xindy</SF> is a general purpose index processor that -can be configured for a variety of document preparation systems. We -will demonstrate step by step the incremental specification of a -complete index style. The examples are based on indexes that are -delivered with the system so one can get acquainted with it -practically. -<p> -<B>Caution:</B> This tutorial does not describe the complete style file -language. In particular, description of rule sets, the multi-run -approach, and standard modules are missing.</EM> -<HR> -<P> -<H2><A NAME="toc1">1.</A> <A HREF="style-tutorial-1.html">About <SF>xindy</SF></A></H2> - -<P> -<H2><A NAME="toc2">2.</A> <A HREF="style-tutorial-2.html">A Basic Introduction</A></H2> - -<UL> -<LI><A HREF="style-tutorial-2.html#ss2.1">2.1 Running <SF>xindy</SF></A> -<LI><A HREF="style-tutorial-2.html#ss2.2">2.2 Adding some Markup</A> -<LI><A HREF="style-tutorial-2.html#ss2.3">2.3 Keyword Mappings</A> -<LI><A HREF="style-tutorial-2.html#ss2.4">2.4 Letter Groups</A> -</UL> -<P> -<H2><A NAME="toc3">3.</A> <A HREF="style-tutorial-3.html">Advanced Features</A></H2> - -<UL> -<LI><A HREF="style-tutorial-3.html#ss3.1">3.1 Location Classes</A> -<LI><A HREF="style-tutorial-3.html#ss3.2">3.2 Hierarchical Location Classes</A> -<LI><A HREF="style-tutorial-3.html#ss3.3">3.3 More about Letter Groups</A> -</UL> -<P> -<H2><A NAME="toc4">4.</A> <A HREF="style-tutorial-4.html">References</A></H2> - -<HR> -<A HREF="style-tutorial-1.html">Next</A> -Previous -Contents -</BODY> -</HTML> diff --git a/Build/source/utils/xindy-old/doc/style-tutorial/Makefile.am b/Build/source/utils/xindy-old/doc/style-tutorial/Makefile.am deleted file mode 100644 index 1f89eb655ea..00000000000 --- a/Build/source/utils/xindy-old/doc/style-tutorial/Makefile.am +++ /dev/null @@ -1,36 +0,0 @@ -## Use `autoreconf' in top-level directory to recreate all -## autoconf/automake files. -## Or, call `automake Makefile' to create only Makefile.in. - -## Copyright (C) 2004-2005 by Gour. -## -## This program is free software; you can redistribute it and/or -## modify it under the terms of the GNU General Public License as -## published by the Free Software Foundation; either version 2 of the -## License, or (at your option) any later version. -## -## This program is distributed in the hope that it will be useful, but -## WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -## General Public License for more details. -## -## You should have received a copy of the GNU General Public License -## along with this program in the file COPYING; if not, write to the -## Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, -## Boston, MA 02110-1301 USA. - -tutorialdir = $(docdir)/style-tutorial - -FILES = \ - ex1.raw \ - ex1.tex \ - ex2.raw \ - ex2.tex \ - index.tex \ - style1.xdy \ - style2.xdy - -EXTRA_DIST = $(FILES) - -tutorial_DATA = $(FILES) - diff --git a/Build/source/utils/xindy-old/doc/style-tutorial/Makefile.in b/Build/source/utils/xindy-old/doc/style-tutorial/Makefile.in deleted file mode 100644 index f49d4bd2aa4..00000000000 --- a/Build/source/utils/xindy-old/doc/style-tutorial/Makefile.in +++ /dev/null @@ -1,395 +0,0 @@ -# Makefile.in generated by automake 1.11.1 from Makefile.am. -# @configure_input@ - -# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, -# 2003, 2004, 2005, 2006, 2007, 2008, 2009 Free Software Foundation, -# Inc. -# This Makefile.in is free software; the Free Software Foundation -# gives unlimited permission to copy and/or distribute it, -# with or without modifications, as long as this notice is preserved. - -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY, to the extent permitted by law; without -# even the implied warranty of MERCHANTABILITY or FITNESS FOR A -# PARTICULAR PURPOSE. - -@SET_MAKE@ - -VPATH = @srcdir@ -pkgdatadir = $(datadir)/@PACKAGE@ -pkgincludedir = $(includedir)/@PACKAGE@ -pkglibdir = $(libdir)/@PACKAGE@ -pkglibexecdir = $(libexecdir)/@PACKAGE@ -am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd -install_sh_DATA = $(install_sh) -c -m 644 -install_sh_PROGRAM = $(install_sh) -c -install_sh_SCRIPT = $(install_sh) -c -INSTALL_HEADER = $(INSTALL_DATA) -transform = $(program_transform_name) -NORMAL_INSTALL = : -PRE_INSTALL = : -POST_INSTALL = : -NORMAL_UNINSTALL = : -PRE_UNINSTALL = : -POST_UNINSTALL = : -build_triplet = @build@ -host_triplet = @host@ -subdir = doc/style-tutorial -DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in -ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 -am__aclocal_m4_deps = $(top_srcdir)/m4/tl_msg_error.m4 \ - $(top_srcdir)/ac/xindy.ac $(top_srcdir)/configure.ac -am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ - $(ACLOCAL_M4) -mkinstalldirs = $(install_sh) -d -CONFIG_CLEAN_FILES = -CONFIG_CLEAN_VPATH_FILES = -SOURCES = -DIST_SOURCES = -am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; -am__vpath_adj = case $$p in \ - $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ - *) f=$$p;; \ - esac; -am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`; -am__install_max = 40 -am__nobase_strip_setup = \ - srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'` -am__nobase_strip = \ - for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||" -am__nobase_list = $(am__nobase_strip_setup); \ - for p in $$list; do echo "$$p $$p"; done | \ - sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \ - $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \ - if (++n[$$2] == $(am__install_max)) \ - { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \ - END { for (dir in files) print dir, files[dir] }' -am__base_list = \ - sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \ - sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g' -am__installdirs = "$(DESTDIR)$(tutorialdir)" -DATA = $(tutorial_DATA) -DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) -ACLOCAL = @ACLOCAL@ -AMTAR = @AMTAR@ -AUTOCONF = @AUTOCONF@ -AUTOHEADER = @AUTOHEADER@ -AUTOMAKE = @AUTOMAKE@ -AWK = @AWK@ -CC = @CC@ -CCDEPMODE = @CCDEPMODE@ -CFLAGS = @CFLAGS@ -CLISP = @CLISP@ -CLISP_LIB = @CLISP_LIB@ -CONVERT_FROM_UTF8 = @CONVERT_FROM_UTF8@ -CPP = @CPP@ -CPPFLAGS = @CPPFLAGS@ -CYGPATH_W = @CYGPATH_W@ -DEFS = @DEFS@ -DEPDIR = @DEPDIR@ -ECHO_C = @ECHO_C@ -ECHO_N = @ECHO_N@ -ECHO_T = @ECHO_T@ -EGREP = @EGREP@ -EXEEXT = @EXEEXT@ -GREP = @GREP@ -INSTALL = @INSTALL@ -INSTALL_DATA = @INSTALL_DATA@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ -LATEX = @LATEX@ -LDFLAGS = @LDFLAGS@ -LEX = @LEX@ -LEXLIB = @LEXLIB@ -LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ -LIBOBJS = @LIBOBJS@ -LIBS = @LIBS@ -LISP_RUN = @LISP_RUN@ -LTLIBOBJS = @LTLIBOBJS@ -MAINT = @MAINT@ -MAKEINFO = @MAKEINFO@ -MKDIR_P = @MKDIR_P@ -OBJEXT = @OBJEXT@ -PACKAGE = @PACKAGE@ -PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ -PACKAGE_NAME = @PACKAGE_NAME@ -PACKAGE_STRING = @PACKAGE_STRING@ -PACKAGE_TARNAME = @PACKAGE_TARNAME@ -PACKAGE_URL = @PACKAGE_URL@ -PACKAGE_VERSION = @PACKAGE_VERSION@ -PATH_SEPARATOR = @PATH_SEPARATOR@ -PDFLATEX = @PDFLATEX@ -PERL = @PERL@ -SET_MAKE = @SET_MAKE@ -SHELL = @SHELL@ -STRIP = @STRIP@ -VERSION = @VERSION@ -XINDY_RUN = @XINDY_RUN@ -abs_builddir = @abs_builddir@ -abs_srcdir = @abs_srcdir@ -abs_top_builddir = @abs_top_builddir@ -abs_top_srcdir = @abs_top_srcdir@ -ac_ct_CC = @ac_ct_CC@ -am__include = @am__include@ -am__leading_dot = @am__leading_dot@ -am__quote = @am__quote@ -am__tar = @am__tar@ -am__untar = @am__untar@ -bindir = @bindir@ -build = @build@ -build_alias = @build_alias@ -build_cpu = @build_cpu@ -build_os = @build_os@ -build_vendor = @build_vendor@ -builddir = @builddir@ -datadir = @datadir@ -datarootdir = @datarootdir@ -docdir = @docdir@ -dvidir = @dvidir@ -exec_prefix = @exec_prefix@ -host = @host@ -host_alias = @host_alias@ -host_cpu = @host_cpu@ -host_os = @host_os@ -host_vendor = @host_vendor@ -htmldir = @htmldir@ -includedir = @includedir@ -infodir = @infodir@ -install_sh = @install_sh@ -libdir = @libdir@ -libexecdir = @libexecdir@ -localedir = @localedir@ -localstatedir = @localstatedir@ -mandir = @mandir@ -mkdir_p = @mkdir_p@ -oldincludedir = @oldincludedir@ -pdfdir = @pdfdir@ -prefix = @prefix@ -program_transform_name = @program_transform_name@ -psdir = @psdir@ -sbindir = @sbindir@ -sharedstatedir = @sharedstatedir@ -srcdir = @srcdir@ -sysconfdir = @sysconfdir@ -target_alias = @target_alias@ -top_build_prefix = @top_build_prefix@ -top_builddir = @top_builddir@ -top_srcdir = @top_srcdir@ -tutorialdir = $(docdir)/style-tutorial -FILES = \ - ex1.raw \ - ex1.tex \ - ex2.raw \ - ex2.tex \ - index.tex \ - style1.xdy \ - style2.xdy - -EXTRA_DIST = $(FILES) -tutorial_DATA = $(FILES) -all: all-am - -.SUFFIXES: -$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) - @for dep in $?; do \ - case '$(am__configure_deps)' in \ - *$$dep*) \ - ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \ - && { if test -f $@; then exit 0; else break; fi; }; \ - exit 1;; \ - esac; \ - done; \ - echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/style-tutorial/Makefile'; \ - $(am__cd) $(top_srcdir) && \ - $(AUTOMAKE) --foreign doc/style-tutorial/Makefile -.PRECIOUS: Makefile -Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status - @case '$?' in \ - *config.status*) \ - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ - *) \ - echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ - cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ - esac; - -$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh - -$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) - cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh -$(am__aclocal_m4_deps): -install-tutorialDATA: $(tutorial_DATA) - @$(NORMAL_INSTALL) - test -z "$(tutorialdir)" || $(MKDIR_P) "$(DESTDIR)$(tutorialdir)" - @list='$(tutorial_DATA)'; test -n "$(tutorialdir)" || list=; \ - for p in $$list; do \ - if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ - echo "$$d$$p"; \ - done | $(am__base_list) | \ - while read files; do \ - echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(tutorialdir)'"; \ - $(INSTALL_DATA) $$files "$(DESTDIR)$(tutorialdir)" || exit $$?; \ - done - -uninstall-tutorialDATA: - @$(NORMAL_UNINSTALL) - @list='$(tutorial_DATA)'; test -n "$(tutorialdir)" || list=; \ - files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \ - test -n "$$files" || exit 0; \ - echo " ( cd '$(DESTDIR)$(tutorialdir)' && rm -f" $$files ")"; \ - cd "$(DESTDIR)$(tutorialdir)" && rm -f $$files -tags: TAGS -TAGS: - -ctags: CTAGS -CTAGS: - - -distdir: $(DISTFILES) - @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ - list='$(DISTFILES)'; \ - dist_files=`for file in $$list; do echo $$file; done | \ - sed -e "s|^$$srcdirstrip/||;t" \ - -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ - case $$dist_files in \ - */*) $(MKDIR_P) `echo "$$dist_files" | \ - sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ - sort -u` ;; \ - esac; \ - for file in $$dist_files; do \ - if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ - if test -d $$d/$$file; then \ - dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ - if test -d "$(distdir)/$$file"; then \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ - cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \ - find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \ - fi; \ - cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \ - else \ - test -f "$(distdir)/$$file" \ - || cp -p $$d/$$file "$(distdir)/$$file" \ - || exit 1; \ - fi; \ - done -check-am: all-am -check: check-am -all-am: Makefile $(DATA) -installdirs: - for dir in "$(DESTDIR)$(tutorialdir)"; do \ - test -z "$$dir" || $(MKDIR_P) "$$dir"; \ - done -install: install-am -install-exec: install-exec-am -install-data: install-data-am -uninstall: uninstall-am - -install-am: all-am - @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am - -installcheck: installcheck-am -install-strip: - $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ - install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ - `test -z '$(STRIP)' || \ - echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install -mostlyclean-generic: - -clean-generic: - -distclean-generic: - -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) - -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES) - -maintainer-clean-generic: - @echo "This command is intended for maintainers to use" - @echo "it deletes files that may require special tools to rebuild." -clean: clean-am - -clean-am: clean-generic mostlyclean-am - -distclean: distclean-am - -rm -f Makefile -distclean-am: clean-am distclean-generic - -dvi: dvi-am - -dvi-am: - -html: html-am - -html-am: - -info: info-am - -info-am: - -install-data-am: install-tutorialDATA - -install-dvi: install-dvi-am - -install-dvi-am: - -install-exec-am: - -install-html: install-html-am - -install-html-am: - -install-info: install-info-am - -install-info-am: - -install-man: - -install-pdf: install-pdf-am - -install-pdf-am: - -install-ps: install-ps-am - -install-ps-am: - -installcheck-am: - -maintainer-clean: maintainer-clean-am - -rm -f Makefile -maintainer-clean-am: distclean-am maintainer-clean-generic - -mostlyclean: mostlyclean-am - -mostlyclean-am: mostlyclean-generic - -pdf: pdf-am - -pdf-am: - -ps: ps-am - -ps-am: - -uninstall-am: uninstall-tutorialDATA - -.MAKE: install-am install-strip - -.PHONY: all all-am check check-am clean clean-generic distclean \ - distclean-generic distdir dvi dvi-am html html-am info info-am \ - install install-am install-data install-data-am install-dvi \ - install-dvi-am install-exec install-exec-am install-html \ - install-html-am install-info install-info-am install-man \ - install-pdf install-pdf-am install-ps install-ps-am \ - install-strip install-tutorialDATA installcheck \ - installcheck-am installdirs maintainer-clean \ - maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ - pdf-am ps ps-am uninstall uninstall-am uninstall-tutorialDATA - - -# Tell versions [3.59,3.63) of GNU make to not export all variables. -# Otherwise a system limit (for SysV at least) may be exceeded. -.NOEXPORT: diff --git a/Build/source/utils/xindy-old/doc/style-tutorial/ex1.raw b/Build/source/utils/xindy-old/doc/style-tutorial/ex1.raw deleted file mode 100644 index 1f4585950a9..00000000000 --- a/Build/source/utils/xindy-old/doc/style-tutorial/ex1.raw +++ /dev/null @@ -1,20 +0,0 @@ -;; Example raw-index file. - -(indexentry :key ("sábado") :locref "5" :attr "definition") -(indexentry :key ("sabão") :locref "6" :attr "definition") -(indexentry :key ("saber") :locref "7" :attr "definition") -(indexentry :key ("sabor") :locref "8" :attr "definition") - -(indexentry :key ("academia") :locref "1" :attr "definition") -(indexentry :key ("acafetado") :locref "2" :attr "definition") -(indexentry :key ("açafrão") :locref "3" :attr "definition") -(indexentry :key ("acalmar") :locref "4" :attr "definition") - -(indexentry :key ("index" "flat") :locref "1" :attr "usage") -(indexentry :key ("index" "hierarchical") :locref "2" :attr "usage") -(indexentry :key ("index" "very" "hierarchical") :locref "3" :attr "usage") -(indexentry :key ("index" "very" "impressive") :locref "4" :attr "usage") - -;(indexentry :key ("arts" "classic") :locref "10" :attr "usage") -;(indexentry :key ("arts" "contemporary") :locref "11" :attr "usage") -;(indexentry :key ("arts" "modern") :locref "12" :attr "usage") diff --git a/Build/source/utils/xindy-old/doc/style-tutorial/ex1.tex b/Build/source/utils/xindy-old/doc/style-tutorial/ex1.tex deleted file mode 100644 index 839c0b9834c..00000000000 --- a/Build/source/utils/xindy-old/doc/style-tutorial/ex1.tex +++ /dev/null @@ -1,16 +0,0 @@ -%% -%% An sample file for typesetting an index. -%% - -\documentclass[12pt]{article} - -\usepackage[latin1]{inputenc} -\usepackage{makeidx} - -\makeindex - -\begin{document} - -\printindex - -\end{document} diff --git a/Build/source/utils/xindy-old/doc/style-tutorial/ex2.raw b/Build/source/utils/xindy-old/doc/style-tutorial/ex2.raw deleted file mode 100644 index 88b767aa60f..00000000000 --- a/Build/source/utils/xindy-old/doc/style-tutorial/ex2.raw +++ /dev/null @@ -1,35 +0,0 @@ -;; Example raw-index file. - -(indexentry :key ("appendices") :locref "A-1" :attr "usage") -(indexentry :key ("appendices") :locref "A-7" :attr "usage") -(indexentry :key ("appendices") :locref "A-11" :attr "usage") -(indexentry :key ("appendices") :locref "B-3" :attr "usage") -(indexentry :key ("appendices") :locref "B-4" :attr "usage") -(indexentry :key ("appendices") :locref "B-5" :attr "usage") -(indexentry :key ("appendices") :locref "C-8" :attr "usage") -(indexentry :key ("appendices") :locref "C-12" :attr "usage") -(indexentry :key ("appendices") :locref "C-13" :attr "usage") -(indexentry :key ("appendices") :locref "C-22" :attr "usage") -(indexentry :key ("appendices") :locref "C-1" :attr "usage") -(indexentry :key ("appendices") :locref "D-2" :attr "usage") -(indexentry :key ("appendices") :locref "D-3" :attr "usage") -(indexentry :key ("appendices") :locref "D-5" :attr "usage") -(indexentry :key ("appendices") :locref "D-10" :attr "usage") - -(indexentry :key ("roman") :locref "iv" :attr "usage") -(indexentry :key ("roman") :locref "ii" :attr "usage") -(indexentry :key ("roman") :locref "iii" :attr "usage") -(indexentry :key ("roman") :locref "ix" :attr "usage") -(indexentry :key ("roman") :locref "x" :attr "usage") -(indexentry :key ("roman") :locref "mcmxcvi" :attr "usage") - -(indexentry :key ("lyuk") :locref "1" :attr "usage") -(indexentry :key ("lyukas") :locref "2" :attr "usage") -(indexentry :key ("maga") :locref "1" :attr "usage") -(indexentry :key ("magyar") :locref "2" :attr "usage") -(indexentry :key ("nagy") :locref "1" :attr "usage") -(indexentry :key ("nagyon") :locref "9" :attr "usage") -(indexentry :key ("negy") :locref "4" :attr "usage") -(indexentry :key ("nyolc") :locref "8" :attr "usage") -(indexentry :key ("nyelv") :locref "1" :attr "usage") - diff --git a/Build/source/utils/xindy-old/doc/style-tutorial/ex2.tex b/Build/source/utils/xindy-old/doc/style-tutorial/ex2.tex deleted file mode 100644 index 839c0b9834c..00000000000 --- a/Build/source/utils/xindy-old/doc/style-tutorial/ex2.tex +++ /dev/null @@ -1,16 +0,0 @@ -%% -%% An sample file for typesetting an index. -%% - -\documentclass[12pt]{article} - -\usepackage[latin1]{inputenc} -\usepackage{makeidx} - -\makeindex - -\begin{document} - -\printindex - -\end{document} diff --git a/Build/source/utils/xindy-old/doc/style-tutorial/index.tex b/Build/source/utils/xindy-old/doc/style-tutorial/index.tex deleted file mode 100644 index 839c0b9834c..00000000000 --- a/Build/source/utils/xindy-old/doc/style-tutorial/index.tex +++ /dev/null @@ -1,16 +0,0 @@ -%% -%% An sample file for typesetting an index. -%% - -\documentclass[12pt]{article} - -\usepackage[latin1]{inputenc} -\usepackage{makeidx} - -\makeindex - -\begin{document} - -\printindex - -\end{document} diff --git a/Build/source/utils/xindy-old/doc/style-tutorial/style1.xdy b/Build/source/utils/xindy-old/doc/style-tutorial/style1.xdy deleted file mode 100644 index ee809f9aae8..00000000000 --- a/Build/source/utils/xindy-old/doc/style-tutorial/style1.xdy +++ /dev/null @@ -1,55 +0,0 @@ -;; This is a first example using `xindy'. - -(mapc #'(lambda (x) - (pushnew x *features*)) - '(:STEP1 :STEP2 :STEP3 :STEP4 :STEP5)) - -#+:STEP1 -(progn - (define-location-class "page-numbers" ("arabic-numbers")) - (define-attributes (("definition" "usage"))) - ) - - -#+:STEP2 -(progn - (markup-index :open "~n\begin{theindex}~n" - :close "~n~n\end{theindex}~n" - :tree) - - (markup-locref :class "page-numbers" :attr "definition" - :open "{\bf " :close "}") - - (markup-locref-list :sep ", ") - (markup-locclass-list :open "\quad{}") - ) - -#+:STEP3 -(progn - (markup-indexentry :open "~n \item " :depth 0) - (markup-indexentry :open "~n \subitem " :depth 1) - (markup-indexentry :open "~n \subsubitem " :depth 2) - - (markup-range :class "page-numbers" :sep "--") - ) - -#+:STEP4 -(progn - (sort-rule "à" "a") - (sort-rule "á" "a") - (sort-rule "ã" "a") - (sort-rule "è" "e") - (sort-rule "é" "e") - (sort-rule "ç" "c") - - (sort-rule "\\texttt{\(.*\)}" "\1" :again :bregexp) - ) - -#+:STEP5 -(progn - (define-letter-groups - ("a" "b" "c" "d" "e" "f" "g" "h" "i" "j" "k" "l" "m" - "n" "o" "p" "q" "r" "s" "t" "u" "v" "w" "x" "y" "z")) - - (markup-letter-group-list :sep "~n~n \indexspace~n") - ) diff --git a/Build/source/utils/xindy-old/doc/style-tutorial/style2.xdy b/Build/source/utils/xindy-old/doc/style-tutorial/style2.xdy deleted file mode 100644 index e45e2f24482..00000000000 --- a/Build/source/utils/xindy-old/doc/style-tutorial/style2.xdy +++ /dev/null @@ -1,80 +0,0 @@ -;; This is another example using `xindy'. - -(mapc #'(lambda (x) - (pushnew x *features*)) - '(:STEP1 :STEP2 :STEP3 :STEP4 :STEP5 :STEP6 :STEP7 :STEP8 :STEP9 :STEP10)) - -#+:STEP1 -(progn - (define-location-class "page-numbers" ("arabic-numbers")) - (define-attributes (("definition" "usage"))) - ) - - -#+:STEP2 -(progn - (markup-index :open "~n\begin{theindex}~n" - :close "~n~n\end{theindex}~n" - :tree) - - (markup-locref :class "page-numbers" :attr "definition" - :open "{\bf " :close "}") - - (markup-locref-list :sep ", ") - (markup-locclass-list :open "\quad{}") - ) - -#+:STEP3 -(progn - (markup-indexentry :open "~n \item " :depth 0) - (markup-indexentry :open "~n \subitem " :depth 1) - (markup-indexentry :open "~n \subsubitem " :depth 2) - ) - -#+:STEP4 -(progn - (sort-rule "à" "a") - (sort-rule "á" "a") - (sort-rule "ã" "a") - (sort-rule "è" "e") - (sort-rule "é" "e") - (sort-rule "ç" "c") - - (sort-rule "\\texttt{(.*)}" "\1" :again :bregexp) - ) - -#+:STEP5 -(progn - (define-letter-groups - ("a" "b" "c" "d" "e" "f" "g" "h" "i" "j" "k" "l" "m" - "n" "o" "p" "q" "r" "s" "t" "u" "v" "w" "x" "y" "z")) - - (markup-letter-group-list :sep "~n~n \indexspace~n") - ) - -#+:STEP6 -(progn - (define-location-class "roman-pages" ("roman-numbers-lowercase")) - #-:STEP8 - (define-location-class "appendices" ("ALPHA" :sep "-" "arabic-numbers")) - ) - -#+:STEP7 -(markup-range :sep "--") - -#+:STEP8 -(progn - (define-location-class "appendices" ("ALPHA" :sep "-" "arabic-numbers") - :hierdepth 2) - (markup-locref-list :sep "; " :depth 0 :class "appendices") - (markup-locref-list :open "~~" :sep ", " :depth 1 :class "appendices") - ) - -#+:STEP9 -(progn - (define-letter-group "ly" :after "l" :before "m") - (define-letter-group "ny" :after "n" :before "o") - - (markup-letter-group :open-head "~n {\bf " :close-head "}" - :capitalize) - ) diff --git a/Build/source/utils/xindy-old/doc/tex2xindy.pdf b/Build/source/utils/xindy-old/doc/tex2xindy.pdf Binary files differdeleted file mode 100644 index 60c59d72f6e..00000000000 --- a/Build/source/utils/xindy-old/doc/tex2xindy.pdf +++ /dev/null diff --git a/Build/source/utils/xindy-old/doc/texindy.pdf b/Build/source/utils/xindy-old/doc/texindy.pdf Binary files differdeleted file mode 100644 index fe96b0ff5dc..00000000000 --- a/Build/source/utils/xindy-old/doc/texindy.pdf +++ /dev/null diff --git a/Build/source/utils/xindy-old/doc/xindy.pdf b/Build/source/utils/xindy-old/doc/xindy.pdf Binary files differdeleted file mode 100644 index 48ab3c0d6e1..00000000000 --- a/Build/source/utils/xindy-old/doc/xindy.pdf +++ /dev/null diff --git a/Build/source/utils/xindy-old/doc/xindy.v2.pdf b/Build/source/utils/xindy-old/doc/xindy.v2.pdf Binary files differdeleted file mode 100644 index be6ea4b71f9..00000000000 --- a/Build/source/utils/xindy-old/doc/xindy.v2.pdf +++ /dev/null |
