diff options
Diffstat (limited to 'Build/source/texk')
114 files changed, 28520 insertions, 0 deletions
diff --git a/Build/source/texk/Makefile.in.orig b/Build/source/texk/Makefile.in.orig new file mode 100644 index 00000000000..48bff423245 --- /dev/null +++ b/Build/source/texk/Makefile.in.orig @@ -0,0 +1,91 @@ +# @configure_input@ +# Top-level Makefile for kpathsea-using programs. + +# Package subdirectories, the library, and all subdirectories. +ESUBDIRS=@ESUBDIRS@ + +programs = web2c $(ESUBDIRS) +kpathsea_dir = kpathsea +all_dirs = $(programs) $(kpathsea_dir) + +kpse_include make/paths.mk +kpse_include make/makevars.mk + +# It's too bad we have to pass all these down, but I see no alternative, +# if we are to propagate changes at the top level. +# XMAKEARGS is for the user to override. +makeargs = $(MFLAGS) CC='$(CC)' CFLAGS='$(CFLAGS)' LDFLAGS='$(LDFLAGS)' $(makevars) $(XMAKEARGS) +installargs = $(makeargs) + +# Not everything from common.mk is relevant to this top-level +# Makefile, but most of it is, and it doesn't seem worth separating the +# compilation-specific stuff. +kpse_include make/common.mk + +# Get more of the default setup. +kpse_include make/programs.mk + +# kpathsea is not a sibling, it's a child. +kpathsea_parent = . + +# Make the library before the programs. +# Always make all, rather than $@, because automake-generated Makefiles, +# among others, do not have a default target. +# Use if ... rather than || or && because Ultrix sh exits for +# no good reason with the latter. +default all: do-kpathsea + for d in $(programs); do if test -f $$d/Makefile; then \ + (cd $$d && $(MAKE) $(makeargs) all) || exit 1; else true; fi; done + +install install-data install-exec: + for d in kpathsea $(programs); do if test -f $$d/Makefile; then \ + (cd $$d && $(MAKE) $(installargs) $@) || exit 1; else true; fi; done + +# Other standard targets for everything. +uninstall uninstall-exec uninstall-data \ +mostlyclean clean realclean extraclean configclean \ +info dvi check depend:: + for d in $(all_dirs); do if test -f $$d/Makefile; then \ + (cd $$d && $(MAKE) $(makeargs) $@) || exit 1; else true; fi; done + +distclean:: + rm -rf conftest* + +distclean:: + for d in $(all_dirs); do if test -f $$d/Makefile; then \ + (cd $$d && $(MAKE) $(makeargs) $@) || exit 1; else true; fi; done + +distclean realclean:: + rm -f Makefile Makefile.aux config.status config.cache config.log libtool + +# Unconditionally remake the library, since we don't want to write out +# the dependencies here. +do-kpathsea: + cd $(kpathsea_dir) && $(MAKE) $(makeargs) + +# Targets that only apply to web2c. +triptrap trip trap mptrap \ +formats fmts bases mems \ +install-formats install-fmts install-bases install-mems \ +install-links c-sources: do-kpathsea + cd web2c && $(MAKE) $(makeargs) $@ + +@MAINT@ac_dir = $(srcdir)/etc/autoconf +@MAINT@autoconf = $(ac_dir)/acspecific.m4 $(ac_dir)/acgeneral.m4 $(ac_dir)/acsite.m4 +@MAINT@configure_in = $(srcdir)/configure.in +@MAINT@$(srcdir)/configure: $(configure_in) $(srcdir)/withenable.ac $(autoconf) +@MAINT@ cd $(srcdir) && $(srcdir)/autoconf2.13 -m $(ac_dir) +@MAINT@ +@MAINT@# And make sure that --enable-maintainer-mode is used if configure is +@MAINT@# called from the makefiles. We do not try to do this through the +@MAINT@# cache, lest the option sneaks into a global cache file. +@MAINT@enablemaintflag = --enable-maintainer-mode + +config.status: $(srcdir)/configure + $(SHELL) $(srcdir)/configure --no-create --verbose $(enablemaintflag) + +Makefile: $(srcdir)/Makefile.in config.status + $(SHELL) config.status + +TAGS: + find $(srcdir) \( -name '*.[cCfFhilsy]' -o -name '*.el' \) | etags - diff --git a/Build/source/texk/README.orig b/Build/source/texk/README.orig new file mode 100644 index 00000000000..16a9f34c35f --- /dev/null +++ b/Build/source/texk/README.orig @@ -0,0 +1,103 @@ +$Id$ +Copyright 2006, 2007, 2008, 2009 TeX Users Group. +You may freely use, modify and/or distribute this file. + +This TeX Live directory contains the programs that use the kpathsea +library for configuration and path searching, and the library itself. + +Some programs can be built on their own, but others, including kpathsea +itself, cannot. Instead, try configure --enable-tetex-build in ../, or +using the Build script there. In general, for TeX Live we only test +configuring the whole tree. + +Upstream sources and last-checked versions follow. If a url is given, +that is the upstream, although this does not mean the program is +actively maintained. Programs marked with a "?" are not (knowingly) +maintained here, but the upstream is unknown. If a program is knowingly +maintained here in the TL repo, that is explicitly stated. + +Anyone -- please research and update any of this information. + + +afm2pl 0.7.03 - ok 28apr08 + http://tex.aanhet.net/afm2pl/ + +bibtex8 - ? + +chktex - ? + +cjkutils - Werner Lemberg + +detex - ? + +devnag - from devnag package installed in texmf-dist. + +djgpp - ? + +dtl - ? + +dvi2tty 5.3.1 - needs update 18may07 + http://www.mesa.nl/pub/dvi2tty/ + +dvidvi - ? + +dviljk - maintained here, by Joachim Schrod + +dvipdfm 0.13.2d - ok 5jun08 + http://gaspra.kettering.edu/dvipdfm/dvipdfm-0.13.2d.tar.gz + until dvipdfmx is a 100% replacement we cannot drop it. + +dvipdfmx 20080607 - ok 9jun08 + http://project.ktug.or.kr/dvipdfmx/snapshot/latest/ + dvipdfmx@project.ktug.or.kr (ChoF, Hirata, Matthias) + +dvipng 1.11 - ok 15may08 + http://www.ctan.org/tex-archive/dviware/dvipng/ + +dvipos - ? + +dvipsk - maintained here by Tom Rokicki, Karl Berry, Akira Kakuto, ... + +etc - random additional files + +gsftopk - from Paul Vojta's xdvi? + +kpathsea - maintained here by Karl Berry, Akira Kakuto, ... + +lacheck - ? + +lcdf-typetools 2.69 - ok 6may08 + http://www.lcdf.org/type/ + +m4 - maintained here, part of our build + +make - maintained here, part of our build + +makeindexk - maintained here (but should it be?) + +musixflx - ? + +ps2pkm - ? + +seetexk - ? + +tex4htk + http://www.cse.ohio-state.edu/~gurari/TeX4ht/ + +texlive - maintained here, scripts + +ttf2pk - + http://ctan.org/fonts/utilities/ttf2pk + +ttfdump - ? + +web2c - maintained here by Karl Berry et al. - core web2c, plain tex, omega. + The TeX variant dirs (pdftexdir, xetexdir, etc.) + updated here by their respective maintainers. + +xdv2pdf - Jonathan Kew + +xdvik 22.84.14 - ok 01jul08 + ftp://tug.org/tex/ + +xdvipdfmx - Jonathan Kew diff --git a/Build/source/texk/ac/withenable.ac b/Build/source/texk/ac/withenable.ac new file mode 100644 index 00000000000..e1f03b94b67 --- /dev/null +++ b/Build/source/texk/ac/withenable.ac @@ -0,0 +1 @@ +## texk/ac/withenable.ac diff --git a/Build/source/texk/afm2pl/Makefile.in.orig b/Build/source/texk/afm2pl/Makefile.in.orig new file mode 100644 index 00000000000..d22379fbd5a --- /dev/null +++ b/Build/source/texk/afm2pl/Makefile.in.orig @@ -0,0 +1,43 @@ +# @configure_input@ +# Makefile for afm2pl. Thomas Esser. public domain. + +program = afm2pl +default all: $(program) $(program).1 + +kpse_include ../make/paths.mk +kpse_include ../make/common.mk +kpse_include ../make/programs.mk + +# See INSTALL for compilation options. +# DEFS = @DEFS@ $(XDEFS) -DKPATHSEA -I$(srcdir)/../dvipsk +DEFS = @DEFS@ $(XDEFS) -DKPATHSEA + +objects = $(program).o + +$(program): $(kpathsea) $(objects) + $(kpathsea_link) $(objects) $(LOADLIBES) + +kpse_include ../make/tkpathsea.mk + +install: install-exec install-data +uninstall: uninstall-exec uninstall-data + +install-exec: $(program) + $(SHELL) $(top_srcdir)/../mkinstalldirs $(bindir) + $(INSTALL_LIBTOOL_PROG) $(program) $(bindir) +uninstall-exec: + rm -f $(bindir)/$(program) + +install-data: $(program).1 + $(SHELL) $(top_srcdir)/../mkinstalldirs $(man1dir) + $(INSTALL_DATA) $(srcdir)/$(program).1 $(man1dir)/$(program).$(manext) +uninstall-data: + rm -f $(man1dir)/$(program).$(manext) + +kpse_include ../make/clean.mk +kpse_include ../make/config.mk + +info dvi check: + +kpse_include ../make/rdepend.mk +kpse_include depend.mk diff --git a/Build/source/texk/afm2pl/ac/withenable.ac b/Build/source/texk/afm2pl/ac/withenable.ac new file mode 100644 index 00000000000..95940e87ebd --- /dev/null +++ b/Build/source/texk/afm2pl/ac/withenable.ac @@ -0,0 +1,3 @@ +## texk/afm2pl/ac/withenable.ac +## configure options and TL libraries required for afm2pl +KPSE_WITH_PROG([afm2pl], [kpathsea]) diff --git a/Build/source/texk/afm2pl/configure.in.orig b/Build/source/texk/afm2pl/configure.in.orig new file mode 100644 index 00000000000..4678c90e576 --- /dev/null +++ b/Build/source/texk/afm2pl/configure.in.orig @@ -0,0 +1,25 @@ +dnl Process this file with autoconf to produce a configure script. +AC_INIT(afm2pl.c) + +AC_CONFIG_HEADERS(c-auto.h:c-auto.in) + +AC_PROG_CC +AC_PROG_INSTALL +AC_PROG_MAKE_SET +AC_PROG_LN_S + +# If libm is present, use it. +AC_CHECK_LIB(m, main,LIBS="$LIBS -lm") + +sinclude(../kpathsea/withenable.ac) + +dnl These tests prevent reliable cross-compilation. Sigh. +dnl Some special hacks are used to make cross-compilation +dnl succeed in one special case. + +AC_UNSET_CC +AC_RESET_CC + +KPSE_CONFIG_FILES([Makefile]) +AC_OUTPUT +date >stamp-auto diff --git a/Build/source/texk/am/man.am b/Build/source/texk/am/man.am new file mode 100644 index 00000000000..8e2ad41d04d --- /dev/null +++ b/Build/source/texk/am/man.am @@ -0,0 +1,50 @@ +## texk/am/man.am: Makefile fragment for kpathsea and web2c manual pages. +## requires $(man_sources), $(EXTRA_DIST), and $(DISTCLEANFILES) +## requires $(KPATHSEA_PATHS_H) giving the directory of kpathsea/paths.h + +SUFFIXES = .1 .man .ps .dvi + +.man.1: + sed -f sedscript $< >$@ +man_files = $(man_sources:.man=.1) +$(man_files): sedscript + +nodist_man1_MANS = $(man_files) + +# At present, all but VERSION should be unused. +sedscript: $(KPATHSEA_PATHS_H)/kpathsea/paths.h + cp /dev/null sedscript + sed -n -e '/^#define/s/#define[ ][ ]*\([A-Z_a-z][A-Z_a-z]*\)[ ][ ]*\(.*\)/s%@\1@%\2%/p' \ + $< \ + | sed -e 's/"//g' -e 's/[ ]*\/\*[^*]*\*\///g' >>sedscript + echo 's%@VER''SION@%$(VERSION)%' >>sedscript + echo 's%@BINDIR@%$(bindir)%' >>sedscript + echo 's%@INFODIR@%$(infodir)%' >>sedscript + echo 's%@TEXINPUTDIR@%$(texinputdir)%' >>sedscript + echo 's%@MFINPUTDIR@%$(mfinputdir)%' >>sedscript + echo 's%@MPINPUTDIR@%$(mpinputdir)%' >>sedscript + echo 's%@FONTDIR@%$(fontdir)%' >>sedscript + echo 's%@FMTDIR@%$(fmtdir)%' >>sedscript + echo 's%@BASEDIR@%$(basedir)%' >>sedscript + echo 's%@MEMDIR@%$(memdir)%' >>sedscript + echo 's%@TEXPOOLDIR@%$(texpooldir)%' >>sedscript + echo 's%@MFPOOLDIR@%$(mfpooldir)%' >>sedscript + echo 's%@MPPOOLDIR@%$(mppooldir)%' >>sedscript + echo 's%@FONTMAPDIR@%$(dvipsdir)%' >>sedscript + echo 's%@LOCALMODES@%$(localmodes)%' >>sedscript + +DITROFF = groff + +.1.dvi: + $(DITROFF) -Tdvi -man $< >$@ +DVIS = $(man_files:.1=.dvi) + +.1.ps: + $(DITROFF) -Tps -man $< >$@ +PSS = $(man_files:.1=.ps) + +EXTRA_DIST += $(man_sources) + +DISTCLEANFILES += sedscript $(man_files) $(DVIS) $(PSS) + +## end of texk/am/man.am diff --git a/Build/source/texk/bibtex8/Makefile.in.orig b/Build/source/texk/bibtex8/Makefile.in.orig new file mode 100644 index 00000000000..55ee9a6724a --- /dev/null +++ b/Build/source/texk/bibtex8/Makefile.in.orig @@ -0,0 +1,50 @@ +# @configure_input@ +# Makefile for bibtex8. Public domain. + +version = 3.71 +# Beware : default char type is unsigned +XCPPFLAGS = -DSUPPORT_8BIT -DKPATHSEA -DUNIX -funsigned-char + +kpse_include ../make/paths.mk +kpse_include ../make/common.mk +kpse_include ../make/programs.mk +kpse_include ../make/texi.mk + +# +# Object files +# +OBJS = bibtex-1.o bibtex-2.o bibtex-3.o \ + bibtex-4.o bibtex.o utils.o + + +programs = bibtex8 +# +# Main target +# +default: all + +all: $(programs) + + +bibtex8: $(OBJS) $(kpathsea) + $(kpathsea_link) $(OBJS) $(LOADLIBES) + +install: all install-data install-doc + -$(top_srcdir)/../mkinstalldirs $(bindir) + -$(INSTALL_LIBTOOL_PROG) bibtex8 $(bindir)/bibtex8 + +install-data: + -$(top_srcdir)/../mkinstalldirs $(texmf)/bibtex/csf + -$(INSTALL) -m 644 $(srcdir)/csf/*.csf $(texmf)/bibtex/csf + +install-doc: + -$(top_srcdir)/../mkinstalldirs $(texmf)/doc/bibtex8 + for i in 00readme.txt HISTORY csfile.txt file_id.diz ; \ + do $(INSTALL) -m 644 $(srcdir)/$$i $(texmf)/doc/bibtex8; \ + done + +kpse_include ../make/tkpathsea.mk +kpse_include ../make/clean.mk +kpse_include ../make/rdepend.mk +kpse_include depend.mk + diff --git a/Build/source/texk/bibtex8/ac/withenable.ac b/Build/source/texk/bibtex8/ac/withenable.ac new file mode 100644 index 00000000000..b65ab681b70 --- /dev/null +++ b/Build/source/texk/bibtex8/ac/withenable.ac @@ -0,0 +1,3 @@ +## texk/bibtex8/ac/withenable.ac +## configure options and TL libraries required for bibtex8 +KPSE_WITH_PROG([bibtex8], [kpathsea]) diff --git a/Build/source/texk/bibtex8/configure.in.orig b/Build/source/texk/bibtex8/configure.in.orig new file mode 100644 index 00000000000..2284eb40f89 --- /dev/null +++ b/Build/source/texk/bibtex8/configure.in.orig @@ -0,0 +1,13 @@ +dnl Public domain. +dnl Process this file with autoconf to produce a configure script. +AC_INIT(bibtex-1.c) + +AC_PROG_CC +AC_PROG_INSTALL +AC_PROG_MAKE_SET +AC_PROG_LN_S + +sinclude(../kpathsea/withenable.ac) + +KPSE_CONFIG_FILES([Makefile]) +AC_OUTPUT diff --git a/Build/source/texk/cjkutils/Makefile.in.orig b/Build/source/texk/cjkutils/Makefile.in.orig new file mode 100644 index 00000000000..bf6c3b3108b --- /dev/null +++ b/Build/source/texk/cjkutils/Makefile.in.orig @@ -0,0 +1,14 @@ +# @configure_input@ + +RM = @RM@ + +all_subdirs = conv scripts hbf2gf + +all check clean configclean default depend dvi extraclean \ +info install install-data install-exec mostlyclean realclean uninstall \ +uninstall-data uninstall-exec: + for d in $(all_subdirs); do (cd $$d && $(MAKE) $@); done + +distclean:: + for d in $(all_subdirs); do (test -f $$d/Makefile && { cd $$d && $(MAKE) $@; } || true); done + $(RM) -f config.cache config.log stamp-auto config.status Makefile diff --git a/Build/source/texk/cjkutils/ac/withenable.ac b/Build/source/texk/cjkutils/ac/withenable.ac new file mode 100644 index 00000000000..9bbe9162d29 --- /dev/null +++ b/Build/source/texk/cjkutils/ac/withenable.ac @@ -0,0 +1,3 @@ +## texk/cjkutils/ac/withenable.ac +## configure options and TL libraries required for cjkutils +KPSE_WITH_PROG([cjkutils], [kpathsea]) diff --git a/Build/source/texk/cjkutils/configure.in.orig b/Build/source/texk/cjkutils/configure.in.orig new file mode 100644 index 00000000000..9e190434224 --- /dev/null +++ b/Build/source/texk/cjkutils/configure.in.orig @@ -0,0 +1,58 @@ +dnl Process this file with autoconf to produce a configure script. +AC_INIT(hbf2gf/hbf.h) + +AC_CONFIG_HEADERS([hbf2gf/c-auto.h:hbf2gf/c-auto.in]) + +dnl check host +AC_CANONICAL_SYSTEM +AC_PROG_MAKE_SET + + +dnl Checks for programs. +AC_PROG_CC + + +dnl Checks for header files. +AC_HEADER_STDC + + +dnl get Compiler flags right. +if test "x$CC" = xgcc; then + XX_CFLAGS="-Wall" +else + case "$host" in + alpha-dec-osf*) + XX_CFLAGS="-std1 -O2 -g3" + ;; + *) + XX_CFLAGS= + ;; + esac +fi +AC_SUBST(XX_CFLAGS) + + +dnl Checks for typedefs, structures, and compiler characteristics. +AC_C_CONST +AC_STRUCT_TM + + +dnl Checks for library functions. +AC_FUNC_VPRINTF +AC_CHECK_FUNCS(strdup strstr strtol strtoul) + +dnl we need this for hbf.c +if test "x$ac_cv_func_strdup" = xno; then + no_strdup=-DNO_STRDUP +fi +AC_SUBST(no_strdup) + +AC_CHECK_PROG(RM, rm, rm) +AC_PROG_INSTALL + +sinclude(../kpathsea/withenable.ac) + +AC_CONFIG_FILES([Makefile]) +KPSE_CONFIG_FILES([conv/Makefile hbf2gf/Makefile scripts/Makefile]) +AC_OUTPUT +date >stamp-auto diff --git a/Build/source/texk/configure.in.orig b/Build/source/texk/configure.in.orig new file mode 100644 index 00000000000..8c7cf884b9e --- /dev/null +++ b/Build/source/texk/configure.in.orig @@ -0,0 +1,57 @@ +dnl Public domain. Originally written many years ago by Karl Berry and +dnl Thomas Esser, and others. +dnl +dnl Top-level configure for kpathsea-using programs. +dnl Our job is to run configure in the relevant subdirectories. +dnl +dnl Assumption: each program will create a c-auto.h that defines +dnl everything kpathsea needs. We arrange this by including (at +dnl autoconf time) kpathsea/common.ac. +dnl +dnl Consequence: we don't need to run configure in the kpathsea directory +dnl itself; we can just copy from a program directory. We'll use the +dnl first one. +dnl +AC_INIT(kpathsea/kpathsea.texi) + +dnl These configure scripts won't work with anything else. +AC_PREREQ(2.59) + +AC_PROG_MAKE_SET + +dnl Because we include make/common.make. +AC_PROG_CC +AC_ISC_POSIX +AC_PROG_LN_S + +dnl If we guessed the prefix in the subdirectories, it might guess +dnl differently than the prefix here, and that would cause confusion. +AC_PREFIX_PROGRAM(tex) + +dnl Pass this down from the top level so that when the subprograms +dnl install kpathsea a command line value is propagated. +AC_PROG_INSTALL + +dnl If the other programs ever acquire their own --with or --enable +dnl options, they must be added, so configure --help at the top level +dnl will show all the options. +sinclude(libtool.m4) +sinclude(withenable.ac) +sinclude(kpathsea/withenable.ac) +sinclude(web2c/withenable.ac) +sinclude(xdvik/withenable.ac) + +AC_PROG_LIBTOOL + +if test "x$with_x" = xno; then + with_xdvik=no +fi + +dnl required subdirs +AC_CONFIG_SUBDIRS([kpathsea web2c]) + +dnl optional subdirs => ESUBDIRS +KPSE_CONFIG_SUBDIRS(kpse_texk_pkglist) + +KPSE_CONFIG_FILES([Makefile]) +AC_OUTPUT diff --git a/Build/source/texk/detex/ac/withenable.ac b/Build/source/texk/detex/ac/withenable.ac new file mode 100644 index 00000000000..5b309bf5c99 --- /dev/null +++ b/Build/source/texk/detex/ac/withenable.ac @@ -0,0 +1,3 @@ +## texk/detex/ac/withenable.ac +## configure options and TL libraries required for detex +KPSE_WITH_PROG([detex], [kpathsea]) diff --git a/Build/source/texk/devnag/ac/withenable.ac b/Build/source/texk/devnag/ac/withenable.ac new file mode 100644 index 00000000000..1391d6e9e70 --- /dev/null +++ b/Build/source/texk/devnag/ac/withenable.ac @@ -0,0 +1,3 @@ +## texk/devnag/ac/withenable.ac +## configure options and TL libraries required for devnag +KPSE_WITH_PROG([devnag]) diff --git a/Build/source/texk/dtl/ac/withenable.ac b/Build/source/texk/dtl/ac/withenable.ac new file mode 100644 index 00000000000..532a2ac77bc --- /dev/null +++ b/Build/source/texk/dtl/ac/withenable.ac @@ -0,0 +1,3 @@ +## texk/dtl/ac/withenable.ac +## configure options and TL libraries required for dtl +KPSE_WITH_PROG([dtl], [kpathsea]) diff --git a/Build/source/texk/dummy/Makefile.am b/Build/source/texk/dummy/Makefile.am new file mode 100644 index 00000000000..7ab40d9192e --- /dev/null +++ b/Build/source/texk/dummy/Makefile.am @@ -0,0 +1,10 @@ +## +noinst_DATA = ../subtexkdir-configure + +DISTCLEANFILES = $(noinst_DATA) + +all-local: $(noinst_DATA) + +../subtexkdir-configure: + echo "${srcdir}/configure" | sed 's,dummy/,SUBTEXKDIR/,' >$@ + diff --git a/Build/source/texk/dummy/Makefile.in b/Build/source/texk/dummy/Makefile.in new file mode 100644 index 00000000000..563d532f413 --- /dev/null +++ b/Build/source/texk/dummy/Makefile.in @@ -0,0 +1,420 @@ +# Makefile.in generated by automake 1.10.2 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +subdir = . +DIST_COMMON = $(am__configure_deps) \ + $(srcdir)/../../build-aux/install-sh \ + $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in $(top_srcdir)/configure \ + ../../build-aux/config.guess ../../build-aux/config.sub \ + ../../build-aux/depcomp ../../build-aux/install-sh \ + ../../build-aux/ltmain.sh ../../build-aux/missing \ + ../../build-aux/texinfo.tex ../../build-aux/ylwrap +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno config.status.lineno +mkinstalldirs = $(install_sh) -d +CONFIG_CLEAN_FILES = +SOURCES = +DIST_SOURCES = +DATA = $(noinst_DATA) +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +am__remove_distdir = \ + { test ! -d $(distdir) \ + || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -fr $(distdir); }; } +DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 +GZIP_ENV = --best +distuninstallcheck_listfiles = find . -type f -print +distcleancheck_listfiles = find . -type f -print +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LIBOBJS = @LIBOBJS@ +LIBS = @LIBS@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VERSION = @VERSION@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +am__leading_dot = @am__leading_dot@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build_alias = @build_alias@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host_alias = @host_alias@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +noinst_DATA = ../subtexkdir-configure +DISTCLEANFILES = $(noinst_DATA) +all: all-am + +.SUFFIXES: +am--refresh: + @: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \ + cd $(srcdir) && $(AUTOMAKE) --foreign \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) +tags: TAGS +TAGS: + +ctags: CTAGS +CTAGS: + + +distdir: $(DISTFILES) + $(am__remove_distdir) + test -d $(distdir) || mkdir $(distdir) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r $(distdir) +dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) +dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 + $(am__remove_distdir) + +dist-lzma: distdir + tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma + $(am__remove_distdir) + +dist-tarZ: distdir + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__remove_distdir) + +dist-shar: distdir + shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz + $(am__remove_distdir) + +dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__remove_distdir) + +dist dist-all: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 + $(am__remove_distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.lzma*) \ + unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac + chmod -R a-w $(distdir); chmod a+w $(distdir) + mkdir $(distdir)/_build + mkdir $(distdir)/_inst + chmod a-w $(distdir) + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && cd $(distdir)/_build \ + && ../configure --srcdir=.. --prefix="$$dc_install_base" \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck + $(am__remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' +distuninstallcheck: + @cd $(distuninstallcheck_dir) \ + && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am +check: check-am +all-am: Makefile $(DATA) all-local +installdirs: +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-generic mostlyclean-am + +distclean: distclean-am + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -f Makefile +distclean-am: clean-am distclean-generic + +dvi: dvi-am + +dvi-am: + +html: html-am + +info: info-am + +info-am: + +install-data-am: + +install-dvi: install-dvi-am + +install-exec-am: + +install-html: install-html-am + +install-info: install-info-am + +install-man: + +install-pdf: install-pdf-am + +install-ps: install-ps-am + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-generic + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: + +.MAKE: install-am install-strip + +.PHONY: all all-am all-local am--refresh check check-am clean \ + clean-generic dist dist-all dist-bzip2 dist-gzip dist-lzma \ + dist-shar dist-tarZ dist-zip distcheck distclean \ + distclean-generic distcleancheck distdir distuninstallcheck \ + dvi dvi-am html html-am info info-am install install-am \ + install-data install-data-am install-dvi install-dvi-am \ + install-exec install-exec-am install-html install-html-am \ + install-info install-info-am install-man install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ + pdf-am ps ps-am uninstall uninstall-am + + +all-local: $(noinst_DATA) + +../subtexkdir-configure: + echo "${srcdir}/configure" | sed 's,dummy/,SUBTEXKDIR/,' >$@ +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/Build/source/texk/dummy/aclocal.m4 b/Build/source/texk/dummy/aclocal.m4 new file mode 100644 index 00000000000..a249a8e6d87 --- /dev/null +++ b/Build/source/texk/dummy/aclocal.m4 @@ -0,0 +1,618 @@ +# generated automatically by aclocal 1.10.2 -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.63],, +[m4_warning([this file was generated for autoconf 2.63. +You have another version of autoconf. It may work, but is not guaranteed to. +If you have problems, you may need to regenerate the build system entirely. +To do so, use the procedure documented by the package, typically `autoreconf'.])]) + +# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +# (This private macro should not be called outside this file.) +AC_DEFUN([AM_AUTOMAKE_VERSION], +[am__api_version='1.10' +dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to +dnl require some minimum version. Point them to the right macro. +m4_if([$1], [1.10.2], [], + [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl +]) + +# _AM_AUTOCONF_VERSION(VERSION) +# ----------------------------- +# aclocal traces this macro to find the Autoconf version. +# This is a private macro too. Using m4_define simplifies +# the logic in aclocal, which can simply ignore this definition. +m4_define([_AM_AUTOCONF_VERSION], []) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. +# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], +[AM_AUTOMAKE_VERSION([1.10.2])dnl +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) + +# AM_AUX_DIR_EXPAND -*- Autoconf -*- + +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to +# `$srcdir', `$srcdir/..', or `$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is `.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +# and then we would define $MISSING as +# MISSING="\${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], +[dnl Rely on autoconf to set up CDPATH properly. +AC_PREREQ([2.50])dnl +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` +]) + +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 8 + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[AC_PREREQ(2.52)dnl + ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE])dnl +AC_SUBST([$1_FALSE])dnl +_AM_SUBST_NOTMAKE([$1_TRUE])dnl +_AM_SUBST_NOTMAKE([$1_FALSE])dnl +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) + +# Do all the work for Automake. -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005, 2006, 2008 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 13 + +# This macro actually does too much. Some checks are only needed if +# your package does certain things. But this isn't really a big deal. + +# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +# AM_INIT_AUTOMAKE([OPTIONS]) +# ----------------------------------------------- +# The call with PACKAGE and VERSION arguments is the old style +# call (pre autoconf-2.50), which is being phased out. PACKAGE +# and VERSION should now be passed to AC_INIT and removed from +# the call to AM_INIT_AUTOMAKE. +# We support both call styles for the transition. After +# the next Automake release, Autoconf can make the AC_INIT +# arguments mandatory, and then we can depend on a new Autoconf +# release and drop the old call support. +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_PREREQ([2.60])dnl +dnl Autoconf wants to disallow AM_ names. We explicitly allow +dnl the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL])dnl +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi +AC_SUBST([CYGPATH_W]) + +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl +dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. +m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, + [m4_fatal([AC_INIT should be called with package and version arguments])])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) + AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) +AM_MISSING_PROG(AUTOCONF, autoconf) +AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) +AM_MISSING_PROG(AUTOHEADER, autoheader) +AM_MISSING_PROG(MAKEINFO, makeinfo) +AM_PROG_INSTALL_SH +AM_PROG_INSTALL_STRIP +AC_REQUIRE([AM_PROG_MKDIR_P])dnl +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES(CC)], + [define([AC_PROG_CC], + defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES(CXX)], + [define([AC_PROG_CXX], + defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJC], + [_AM_DEPENDENCIES(OBJC)], + [define([AC_PROG_OBJC], + defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl +]) +]) + + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. The stamp files are numbered to have different names. + +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +# loop where config.status creates the headers, so we can generate +# our stamp files there. +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +[# Compute $1's index in $config_headers. +_am_arg=$1 +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) + +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} +AC_SUBST(install_sh)]) + +# Copyright (C) 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# Check whether the underlying file-system supports filenames +# with a leading dot. For instance MS-DOS doesn't. +AC_DEFUN([AM_SET_LEADING_DOT], +[rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) + +# Add --enable-maintainer-mode option to configure. -*- Autoconf -*- +# From Jim Meyering + +# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 4 + +AC_DEFUN([AM_MAINTAINER_MODE], +[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) + dnl maintainer-mode is disabled by default + AC_ARG_ENABLE(maintainer-mode, +[ --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer], + USE_MAINTAINER_MODE=$enableval, + USE_MAINTAINER_MODE=no) + AC_MSG_RESULT([$USE_MAINTAINER_MODE]) + AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes]) + MAINT=$MAINTAINER_MODE_TRUE + AC_SUBST(MAINT)dnl +] +) + +AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE]) + +# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 5 + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + + +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it supports --run. +# If it does, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([missing])dnl +test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + AC_MSG_WARN([`missing' script is too old or missing]) +fi +]) + +# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_MKDIR_P +# --------------- +# Check for `mkdir -p'. +AC_DEFUN([AM_PROG_MKDIR_P], +[AC_PREREQ([2.60])dnl +AC_REQUIRE([AC_PROG_MKDIR_P])dnl +dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, +dnl while keeping a definition of mkdir_p for backward compatibility. +dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. +dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of +dnl Makefile.ins that do not define MKDIR_P, so we do our own +dnl adjustment using top_builddir (which is defined more often than +dnl MKDIR_P). +AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl +case $mkdir_p in + [[\\/$]]* | ?:[[\\/]]*) ;; + */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +esac +]) + +# Helper functions for option handling. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 4 + +# _AM_MANGLE_OPTION(NAME) +# ----------------------- +AC_DEFUN([_AM_MANGLE_OPTION], +[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +# _AM_SET_OPTION(NAME) +# ------------------------------ +# Set option NAME. Presently that only means defining a flag for this option. +AC_DEFUN([_AM_SET_OPTION], +[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) + +# _AM_SET_OPTIONS(OPTIONS) +# ---------------------------------- +# OPTIONS is a space-separated list of Automake options. +AC_DEFUN([_AM_SET_OPTIONS], +[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) + +# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +# ------------------------------------------- +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +AC_DEFUN([_AM_IF_OPTION], +[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +# Check to make sure that the build environment is sane. -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 4 + +# AM_SANITY_CHECK +# --------------- +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Just in case +sleep 1 +echo timestamp > conftest.file +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftest.file` + fi + rm -f conftest.file + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +alias in your environment]) + fi + + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +AC_MSG_RESULT(yes)]) + +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_STRIP +# --------------------- +# One issue with vendor `install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in `make install-strip', and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be `maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +# Copyright (C) 2006 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. +# This macro is traced by Automake. +AC_DEFUN([_AM_SUBST_NOTMAKE]) + +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of `v7', `ustar', or `pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. +AM_MISSING_PROG([AMTAR], [tar]) +m4_if([$1], [v7], + [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], + [m4_case([$1], [ustar],, [pax],, + [m4_fatal([Unknown tar format])]) +AC_MSG_CHECKING([how to create a $1 tar archive]) +# Loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +_am_tools=${am_cv_prog_tar_$1-$_am_tools} +# Do not fold the above two line into one, because Tru64 sh and +# Solaris sh will not grok spaces in the rhs of `-'. +for _am_tool in $_am_tools +do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar <conftest.tar]) + grep GrepMe conftest.dir/file >/dev/null 2>&1 && break + fi +done +rm -rf conftest.dir + +AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + diff --git a/Build/source/texk/dummy/configure b/Build/source/texk/dummy/configure new file mode 100755 index 00000000000..1a4943f3765 --- /dev/null +++ b/Build/source/texk/dummy/configure @@ -0,0 +1,3403 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.63 for TeX live texk dummy 2009. +# +# Report bugs to <tex-k@tug.org>. +# +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + + + +# PATH needs CR +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + { (exit 1); exit 1; } +fi + +# Work around bugs in pre-3.0 UWIN ksh. +for as_var in ENV MAIL MAILPATH +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# CDPATH. +$as_unset CDPATH + + +if test "x$CONFIG_SHELL" = x; then + if (eval ":") 2>/dev/null; then + as_have_required=yes +else + as_have_required=no +fi + + if test $as_have_required = yes && (eval ": +(as_func_return () { + (exit \$1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test \$exitcode = 0) || { (exit 1); exit 1; } + +( + as_lineno_1=\$LINENO + as_lineno_2=\$LINENO + test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && + test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } +") 2> /dev/null; then + : +else + as_candidate_shells= + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + case $as_dir in + /*) + for as_base in sh bash ksh sh5; do + as_candidate_shells="$as_candidate_shells $as_dir/$as_base" + done;; + esac +done +IFS=$as_save_IFS + + + for as_shell in $as_candidate_shells $SHELL; do + # Try only shells that exist, to save several forks. + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { ("$as_shell") 2> /dev/null <<\_ASEOF +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + +: +_ASEOF +}; then + CONFIG_SHELL=$as_shell + as_have_required=yes + if { "$as_shell" 2> /dev/null <<\_ASEOF +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + +: +(as_func_return () { + (exit $1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = "$1" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test $exitcode = 0) || { (exit 1); exit 1; } + +( + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } + +_ASEOF +}; then + break +fi + +fi + + done + + if test "x$CONFIG_SHELL" != x; then + for as_var in BASH_ENV ENV + do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + done + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} +fi + + + if test $as_have_required = no; then + echo This script requires a shell more modern than all the + echo shells that I found on your system. Please install a + echo modern shell, or manually run the script under such a + echo shell if you do have one. + { (exit 1); exit 1; } +fi + + +fi + +fi + + + +(eval "as_func_return () { + (exit \$1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test \$exitcode = 0") || { + echo No shell found that supports shell functions. + echo Please tell bug-autoconf@gnu.org about your system, + echo including any error possibly output before this message. + echo This can help us improve future autoconf versions. + echo Configuration will now proceed without shell functions. +} + + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line after each line using $LINENO; the second 'sed' + # does the real work. The second script uses 'N' to pair each + # line-number line with the line containing $LINENO, and appends + # trailing '-' during substitution so that $LINENO is not a special + # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # scripts with optimization help from Paolo Bonzini. Blame Lee + # E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in +-n*) + case `echo 'x\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + *) ECHO_C='\c';; + esac;; +*) + ECHO_N='-n';; +esac +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' +else + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +fi +as_executable_p=$as_test_x + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + + +exec 7<&0 </dev/null 6>&1 + +# Name of the host. +# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIBOBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} + +# Identity of this package. +PACKAGE_NAME='TeX live texk dummy' +PACKAGE_TARNAME='tex-live-texk-dummy' +PACKAGE_VERSION='2009' +PACKAGE_STRING='TeX live texk dummy 2009' +PACKAGE_BUGREPORT='tex-k@tug.org' + +ac_unique_file="../../build-aux/missing" +ac_subst_vars='LTLIBOBJS +LIBOBJS +MAINT +MAINTAINER_MODE_FALSE +MAINTAINER_MODE_TRUE +am__untar +am__tar +AMTAR +am__leading_dot +SET_MAKE +AWK +mkdir_p +MKDIR_P +INSTALL_STRIP_PROGRAM +STRIP +install_sh +MAKEINFO +AUTOHEADER +AUTOMAKE +AUTOCONF +ACLOCAL +VERSION +PACKAGE +CYGPATH_W +am__isrc +INSTALL_DATA +INSTALL_SCRIPT +INSTALL_PROGRAM +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' +ac_subst_files='' +ac_user_opts=' +enable_option_checking +enable_maintainer_mode +' + ac_precious_vars='build_alias +host_alias +target_alias' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 + { (exit 1); exit 1; }; } + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 + { (exit 1); exit 1; }; } + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 + { (exit 1); exit 1; }; } + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 + { (exit 1); exit 1; }; } + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) { $as_echo "$as_me: error: unrecognized option: $ac_option +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + { $as_echo "$as_me: error: missing argument to $ac_option" >&2 + { (exit 1); exit 1; }; } +fi + +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2 + { (exit 1); exit 1; }; } ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +fi + +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir +do + eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; } +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used." >&2 + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + { $as_echo "$as_me: error: working directory cannot be determined" >&2 + { (exit 1); exit 1; }; } +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + { $as_echo "$as_me: error: pwd does not report name of working directory" >&2 + { (exit 1); exit 1; }; } + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2 + { (exit 1); exit 1; }; } + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures TeX live texk dummy 2009 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root + [DATAROOTDIR/doc/tex-live-texk-dummy] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF + +Program names: + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of TeX live texk dummy 2009:";; + esac + cat <<\_ACEOF + +Optional Features: + --disable-option-checking ignore unrecognized --enable/--with options + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer + +Report bugs to <tex-k@tug.org>. +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +TeX live texk dummy configure 2009 +generated by GNU Autoconf 2.63 + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by TeX live texk dummy $as_me 2009, which was +generated by GNU Autoconf 2.63. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" +done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 2) + ac_configure_args1="$ac_configure_args1 '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + ac_configure_args="$ac_configure_args '$ac_arg'" + ;; + esac + done +done +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + cat <<\_ASBOX +## ---------------- ## +## Cache variables. ## +## ---------------- ## +_ASBOX + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) $as_unset $ac_var ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo + + cat <<\_ASBOX +## ----------------- ## +## Output variables. ## +## ----------------- ## +_ASBOX + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +## ------------------- ## +## File substitutions. ## +## ------------------- ## +_ASBOX + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + cat <<\_ASBOX +## ----------- ## +## confdefs.h. ## +## ----------- ## +_ASBOX + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE +if test -n "$CONFIG_SITE"; then + ac_site_file1=$CONFIG_SITE +elif test "x$prefix" != xNONE; then + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site +else + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site +fi +for ac_site_file in "$ac_site_file1" "$ac_site_file2" +do + test "x$ac_site_file" = xNONE && continue + if test -r "$ac_site_file"; then + { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special + # files actually), so we avoid doing that. + if test -f "$cache_file"; then + { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 +$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} + { (exit 1); exit 1; }; } +fi + + + + + + + + + + + + + + + + + + + + + + + + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + +ac_aux_dir= +for ac_dir in ../../build-aux "$srcdir"/../../build-aux; do + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../build-aux \"$srcdir\"/../../build-aux" >&5 +$as_echo "$as_me: error: cannot find install-sh or install.sh in ../../build-aux \"$srcdir\"/../../build-aux" >&2;} + { (exit 1); exit 1; }; } +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + + + +am__api_version='1.10' + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +# Reject install programs that cannot install multiple files. +{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +$as_echo_n "checking for a BSD-compatible install... " >&6; } +if test -z "$INSTALL"; then +if test "${ac_cv_path_install+set}" = set; then + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in + ./ | .// | /cC/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + fi + done + done + ;; +esac + +done +IFS=$as_save_IFS + +rm -rf conftest.one conftest.two conftest.dir + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5 +$as_echo "$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5 +$as_echo_n "checking whether build environment is sane... " >&6; } +# Just in case +sleep 1 +echo timestamp > conftest.file +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftest.file` + fi + rm -f conftest.file + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken +alias in your environment" >&5 +$as_echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken +alias in your environment" >&2;} + { (exit 1); exit 1; }; } + fi + + test "$2" = conftest.file + ) +then + # Ok. + : +else + { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files! +Check your system clock" >&5 +$as_echo "$as_me: error: newly created file is older than distributed files! +Check your system clock" >&2;} + { (exit 1); exit 1; }; } +fi +{ $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } +test "$program_prefix" != NONE && + program_transform_name="s&^&$program_prefix&;$program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +# Double any \ or $. +# By default was `s,x,x', remove it if useless. +ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' +program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` + +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` + +test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 +$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} +fi + +{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5 +$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } +if test -z "$MKDIR_P"; then + if test "${ac_cv_path_mkdir+set}" = set; then + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue + case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( + 'mkdir (GNU coreutils) '* | \ + 'mkdir (coreutils) '* | \ + 'mkdir (fileutils) '4.1*) + ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext + break 3;; + esac + done + done +done +IFS=$as_save_IFS + +fi + + if test "${ac_cv_path_mkdir+set}" = set; then + MKDIR_P="$ac_cv_path_mkdir -p" + else + # As a last resort, use the slow shell script. Don't cache a + # value for MKDIR_P within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + test -d ./--version && rmdir ./--version + MKDIR_P="$ac_install_sh -d" + fi +fi +{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5 +$as_echo "$MKDIR_P" >&6; } + +mkdir_p="$MKDIR_P" +case $mkdir_p in + [\\/$]* | ?:[\\/]*) ;; + */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +esac + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_AWK+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AWK="$ac_prog" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { $as_echo "$as_me:$LINENO: result: $AWK" >&5 +$as_echo "$AWK" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AWK" && break +done + +{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null + +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 +$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} + { (exit 1); exit 1; }; } + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi + + +# Define the identity of the package. + PACKAGE='tex-live-texk-dummy' + VERSION='2009' + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE "$PACKAGE" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define VERSION "$VERSION" +_ACEOF + +# Some tools Automake needs. + +ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} + + +AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} + + +AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} + + +AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} + + +MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} + +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_STRIP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:$LINENO: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +# Always define AMTAR for backward compatibility. + +AMTAR=${AMTAR-"${am_missing_run}tar"} + +am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' + + + + + +{ $as_echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 +$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } + # Check whether --enable-maintainer-mode was given. +if test "${enable_maintainer_mode+set}" = set; then + enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval +else + USE_MAINTAINER_MODE=no +fi + + { $as_echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 +$as_echo "$USE_MAINTAINER_MODE" >&6; } + if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' +else + MAINTAINER_MODE_TRUE='#' + MAINTAINER_MODE_FALSE= +fi + + MAINT=$MAINTAINER_MODE_TRUE + + + +echo "$ac_configure_args" | sed 's,/dummy,/SUBTEXKDIR,g' >../subtexkdir-conf.args + +ac_config_files="$ac_config_files Makefile" + + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) $as_unset $ac_var ;; + esac ;; + esac + done + + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + test "x$cache_file" != "x/dev/null" && + { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} + cat confcache >$cache_file + else + { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +# Transform confdefs.h into DEFS. +# Protect against shell expansion while executing Makefile rules. +# Protect against Makefile macro expansion. +# +# If the first sed substitution is executed (which looks for macros that +# take arguments), then branch to the quote section. Otherwise, +# look for a macro that doesn't take arguments. +ac_script=' +:mline +/\\$/{ + N + s,\\\n,, + b mline +} +t clear +:clear +s/^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*([^)]*)\)[ ]*\(.*\)/-D\1=\2/g +t quote +s/^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)/-D\1=\2/g +t quote +b any +:quote +s/[ `~#$^&*(){}\\|;'\''"<>?]/\\&/g +s/\[/\\&/g +s/\]/\\&/g +s/\$/$$/g +H +:any +${ + g + s/^\n// + s/\n/ /g + p +} +' +DEFS=`sed -n "$ac_script" confdefs.h` + + +ac_libobjs= +ac_ltlibobjs= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + +if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi + +: ${CONFIG_STATUS=./config.status} +ac_write_fail=0 +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false +SHELL=\${CONFIG_SHELL-$SHELL} +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + + + +# PATH needs CR +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + { (exit 1); exit 1; } +fi + +# Work around bugs in pre-3.0 UWIN ksh. +for as_var in ENV MAIL MAILPATH +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# CDPATH. +$as_unset CDPATH + + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line after each line using $LINENO; the second 'sed' + # does the real work. The second script uses 'N' to pair each + # line-number line with the line containing $LINENO, and appends + # trailing '-' during substitution so that $LINENO is not a special + # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # scripts with optimization help from Paolo Bonzini. Blame Lee + # E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in +-n*) + case `echo 'x\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + *) ECHO_C='\c';; + esac;; +*) + ECHO_N='-n';; +esac +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' +else + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +fi +as_executable_p=$as_test_x + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +exec 6>&1 + +# Save the log message, to keep $[0] and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by TeX live texk dummy $as_me 2009, which was +generated by GNU Autoconf 2.63. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + +_ACEOF + +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac + + + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +ac_cs_usage="\ +\`$as_me' instantiates files from templates according to the +current configuration. + +Usage: $0 [OPTION]... [FILE]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + -q, --quiet, --silent + do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + +Configuration files: +$config_files + +Report bugs to <bug-autoconf@gnu.org>." + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_version="\\ +TeX live texk dummy config.status 2009 +configured by $0, generated by GNU Autoconf 2.63, + with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" + +Copyright (C) 2008 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' +MKDIR_P='$MKDIR_P' +AWK='$AWK' +test -n "\$AWK" || AWK=awk +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + CONFIG_FILES="$CONFIG_FILES '$ac_optarg'" + ac_need_defaults=false;; + --he | --h | --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) { $as_echo "$as_me: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } ;; + + *) ac_config_targets="$ac_config_targets $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +if \$ac_cs_recheck; then + set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + $as_echo "$ac_log" +} >&5 + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + + *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= + trap 'exit_status=$? + { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status +' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || +{ + $as_echo "$as_me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } +} + +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then + + +ac_cr='
' +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi + +echo 'BEGIN {' >"$tmp/subs1.awk" && +_ACEOF + + +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } +ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } + + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done +rm -f conf$$subs.sh + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$tmp/subs1.awk" <<\\_ACAWK && +_ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\).*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\).*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' <conf$$subs.awk | sed ' +/^[^""]/{ + N + s/\n// +} +' >>$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line +} + +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ + || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5 +$as_echo "$as_me: error: could not setup config files machinery" >&2;} + { (exit 1); exit 1; }; } +_ACEOF + +# VPATH may cause trouble with some makes, so we remove $(srcdir), +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=/{ +s/:*\$(srcdir):*/:/ +s/:*\${srcdir}:*/:/ +s/:*@srcdir@:*/:/ +s/^\([^=]*=[ ]*\):*/\1/ +s/:*$// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +fi # test -n "$CONFIG_FILES" + + +eval set X " :F $CONFIG_FILES " +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5 +$as_echo "$as_me: error: invalid tag $ac_tag" >&2;} + { (exit 1); exit 1; }; };; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 +$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;} + { (exit 1); exit 1; }; };; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + ac_file_inputs="$ac_file_inputs '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:$LINENO: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac + + case $ac_tag in + *:-:* | *:-) cat >"$tmp/stdin" \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } ;; + esac + ;; + esac + + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + { as_dir="$ac_dir" + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac + ac_MKDIR_P=$MKDIR_P + case $MKDIR_P in + [\\/$]* | ?:[\\/]* ) ;; + */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; + esac +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= + +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p +' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +s&@MKDIR_P@&$ac_MKDIR_P&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined." >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined." >&2;} + + rm -f "$tmp/stdin" + case $ac_file in + -) cat "$tmp/out" && rm -f "$tmp/out";; + *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; + esac \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } + ;; + + + + esac + +done # for ac_tag + + +{ (exit 0); exit 0; } +_ACEOF +chmod +x $CONFIG_STATUS +ac_clean_files=$ac_clean_files_save + +test $ac_write_fail = 0 || + { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || { (exit 1); exit 1; } +fi +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} +fi + diff --git a/Build/source/texk/dummy/configure.ac b/Build/source/texk/dummy/configure.ac new file mode 100644 index 00000000000..ea8d39437ec --- /dev/null +++ b/Build/source/texk/dummy/configure.ac @@ -0,0 +1,21 @@ +dnl Process this file with autoconf to produce a configure script. +dnl +dnl Copyright (C) 2009 Peter Breitenlohner <tex-live@tug.org> +dnl +dnl This file is free software; the copyright holder +dnl gives unlimited permission to copy and/or distribute it, +dnl with or without modifications, as long as this notice is preserved. +dnl +AC_INIT([TeX live texk dummy], [2009], [tex-k@tug.org]) +AC_PREREQ([2.63]) +AC_CONFIG_SRCDIR([../../build-aux/missing]) +AC_CONFIG_AUX_DIR([../../build-aux]) + +AM_INIT_AUTOMAKE([foreign dist-bzip2]) +AM_MAINTAINER_MODE + +echo "$ac_configure_args" | sed 's,/dummy,/SUBTEXKDIR,g' >../subtexkdir-conf.args + +AC_CONFIG_FILES([Makefile]) + +AC_OUTPUT diff --git a/Build/source/texk/dvi2tty/ac/withenable.ac b/Build/source/texk/dvi2tty/ac/withenable.ac new file mode 100644 index 00000000000..a68df38b816 --- /dev/null +++ b/Build/source/texk/dvi2tty/ac/withenable.ac @@ -0,0 +1,3 @@ +## texk/dvi2tty/ac/withenable.ac +## configure options and TL libraries required for dvi2tty +KPSE_WITH_PROG([dvi2tty], [kpathsea]) diff --git a/Build/source/texk/dvidvi/ac/withenable.ac b/Build/source/texk/dvidvi/ac/withenable.ac new file mode 100644 index 00000000000..9beeb86107a --- /dev/null +++ b/Build/source/texk/dvidvi/ac/withenable.ac @@ -0,0 +1,3 @@ +## texk/dvidvi/ac/withenable.ac +## configure options and TL libraries required for dvidvi +KPSE_WITH_PROG([dvidvi], [kpathsea]) diff --git a/Build/source/texk/dviljk/Makefile.in.orig b/Build/source/texk/dviljk/Makefile.in.orig new file mode 100644 index 00000000000..2b5ea365d1e --- /dev/null +++ b/Build/source/texk/dviljk/Makefile.in.orig @@ -0,0 +1,112 @@ +# @configure_input@ +# Makefile for dviljk -- kb@mail.tug.org. Public domain. +version = 2.6 + +.NOTPARALLEL: + +kpse_include ../make/paths.mk +kpse_include ../make/common.mk +kpse_include ../make/programs.mk + +prog_cflags = -DKPATHSEA + +common_objects = tfm.o + +program = dvilj +objects = dvilj.o $(common_objects) +objects2p = dvilj2p.o $(common_objects) +program2p = dvilj2p +objects4 = dvilj4.o $(common_objects) +program4 = dvilj4 +objects4l = dvilj4l.o $(common_objects) +program4l = dvilj4l +program6 = dvilj6 + +programs = $(program) $(program2p) $(program4) $(program4l) + +default: $(program4) +all: $(programs) + +$(program): $(objects) $(kpathsea) + $(kpathsea_link) $(objects) $(LOADLIBES) +$(program2p): $(objects2p) $(kpathsea) + $(kpathsea_link) $(objects2p) $(LOADLIBES) +$(program4): $(objects4) $(kpathsea) + $(kpathsea_link) $(objects4) $(LOADLIBES) +$(program4l): $(objects4l) $(kpathsea) + $(kpathsea_link) $(objects4l) $(LOADLIBES) + +dvilj.o: + $(compile) -c -DLJ $(srcdir)/dvi2xx.c -o $@ +dvilj2p.o: + $(compile) -c -DLJ2P $(srcdir)/dvi2xx.c -o $@ +dvilj4.o: + $(compile) -c -DLJ4 $(srcdir)/dvi2xx.c -o $@ +dvilj4l.o: + $(compile) -c -DLJ4 -DLJ4L $(srcdir)/dvi2xx.c -o $@ + +dvilj.o dvilj2p.o dvilj4.o dvilj4l.o: dvi2xx.c + +VERSION = `grep 'define VERSION' dvi2xx.c | sed -e 's/^.*version //' -e 's/).*//'` +dvilj.man: dvilj.pod dvi2xx.c + pod2man --center="TeX-Live" --release="Version $(VERSION)" $< >$@ +dvilj.ps: dvilj.man + man -t -l $< >$@ + +kpse_include ../make/tkpathsea.mk + +install: install-exec install-data +uninstall: uninstall-exec uninstall-data + +install-exec: + $(SHELL) $(top_srcdir)/../mkinstalldirs $(bindir) + test ! -f $(program) \ + || $(INSTALL_LIBTOOL_PROG) $(program) $(bindir) + test ! -f $(program2p) \ + || $(INSTALL_LIBTOOL_PROG) $(program2p) $(bindir) + test ! -f $(program4) \ + || $(INSTALL_LIBTOOL_PROG) $(program4) $(bindir) + test ! -f $(program4l) \ + || $(INSTALL_LIBTOOL_PROG) $(program4l) $(bindir) + $(INSTALL_SCRIPT) $(srcdir)/dvihp $(scriptdir)/dvihp + cd $(bindir) && (rm -f $(program6); $(LN) $(program4) $(program6)) +uninstall-exec: + cd $(bindir); rm -f $(programs) + +install-data: + $(SHELL) $(top_srcdir)/../mkinstalldirs $(man1dir) + $(INSTALL_DATA) $(srcdir)/dvilj.man $(man1dir)/dvilj.$(manext) + for p in dvilj2p dvilj4 dvilj4l dvilj6; do \ + rm -f $(man1dir)/$$p.$(manext); \ + ln -s dvilj.$(manext) $(man1dir)/$$p.$(manext); \ + done + $(INSTALL_DATA) $(srcdir)/dvihp.man $(man1dir)/dvihp.$(manext) + +# It seems simplest to keep this separate. Use find and cpio instead of +# just cp -r in case the source hierarchy is cvs- or rcs-ified. +# Use "" to quote wildcards because backslash is a directory separator +# on MS-DOS and MS-Windows. +install-fonts: + find fonts -name \( "*.tfm" -o -name "*.vf" \) -print | cpio -pld $(texmf) + +uninstall-data: + rm -f $(man1dir)/dvilj.$(manext) + + +distname = dviljk +program_files = dvihp dvilj.man README.fonts +version_files = dvi2xx.c dvihp + +pre-dist-$(distname): +post-dist-$(distname): + ln -s `pwd`/fonts `pwd`/tex `pwd`/src.fonts $(distdir) + +kpse_include ../make/dist.mk +kpse_include ../make/config.mk + +info dvi check: + +kpse_include ../make/clean.mk + +kpse_include ../make/rdepend.mk +kpse_include depend.mk diff --git a/Build/source/texk/dviljk/ac/withenable.ac b/Build/source/texk/dviljk/ac/withenable.ac new file mode 100644 index 00000000000..3f25facbd84 --- /dev/null +++ b/Build/source/texk/dviljk/ac/withenable.ac @@ -0,0 +1,3 @@ +## texk/dviljk/ac/withenable.ac +## configure options and TL libraries required for dviljk +KPSE_WITH_PROG([dviljk], [kpathsea]) diff --git a/Build/source/texk/dviljk/configure.in.orig b/Build/source/texk/dviljk/configure.in.orig new file mode 100644 index 00000000000..32c3066d897 --- /dev/null +++ b/Build/source/texk/dviljk/configure.in.orig @@ -0,0 +1,20 @@ +dnl Process this file with autoconf to produce a configure script. +AC_INIT(dvi2xx.c) + +AC_CONFIG_HEADERS([c-auto.h:c-auto.in], [date >stamp-auto]) + +AC_PROG_CC +AC_PROG_INSTALL +AC_PROG_MAKE_SET +AC_PROG_LN_S + +sinclude(../kpathsea/withenable.ac) + +dnl These tests prevent reliable cross-compilation. Sigh. +AC_C_CHAR_UNSIGNED +AC_CHECK_SIZEOF(long) + +AC_CHECK_FUNCS(rmdir unlink mkdtemp mktemp) + +KPSE_CONFIG_FILES([Makefile]) +AC_OUTPUT diff --git a/Build/source/texk/dvipdfm/Makefile.in.orig b/Build/source/texk/dvipdfm/Makefile.in.orig new file mode 100644 index 00000000000..a75ca83d585 --- /dev/null +++ b/Build/source/texk/dvipdfm/Makefile.in.orig @@ -0,0 +1,81 @@ +# @configure_input@ + +kpse_include ../make/paths.mk +kpse_include ../make/common.mk +kpse_include ../make/programs.mk + +ZLIBDIR=../../libs/zlib +ZLIBSRCDIR=$(srcdir)/$(ZLIBDIR) +ZLIBDEP = @ZLIBDEP@ +LDZLIB = @LDZLIB@ + +LIBPNGDIR=../../libs/libpng +LIBPNGSRCDIR=$(srcdir)/$(LIBPNGDIR) +LIBPNGDEP = @LIBPNGDEP@ +LDLIBPNG = @LDLIBPNG@ + +LD_ALL_LIBS = $(LDLIBPNG) $(LDZLIB) +ALL_LIBS_DEP = $(ZLIBDEP) $(LIBPNGDEP) + +program = dvipdfm +programs = $(program) ebb +default all: $(programs) + +prog_cflags = @LIBPNGCPPFLAGS@ @ZLIBCPPFLAGS@ + +objects=pdfdev.o pdfdoc.o dvi.o mfileio.o mem.o jpeg.o numbers.o pdfobj.o \ + pdfparse.o pdfspecial.o tfm.o type1.o dvipdfm.o epdf.o vf.o \ + t1crypt.o pkfont.o tpic.o thumbnail.o pngimage.o htex.o \ + mpost.o psimage.o psspecial.o colorsp.o encodings.o @TTF_OPT@ ttf.o +eobjects=ebb.o jpeg.o pdfobj.o mem.o mfileio.o numbers.o pdfparse.o \ + pngimage.o + +$(program): $(objects) $(kpathsea) $(ALL_LIBS_DEP) + $(kpathsea_link) $(objects) $(LD_ALL_LIBS) $(LOADLIBES) + +ebb: $(eobjects) $(kpathsea) $(ALL_LIBS_DEP) + $(kpathsea_link) $(eobjects) $(LD_ALL_LIBS) $(LOADLIBES) + +$(LIBPNGDIR)/libpng.a: + cd $(LIBPNGDIR); $(MAKE) + +$(ZLIBDIR)/libz.a: + cd $(ZLIBDIR); $(MAKE) + +kpse_include ../make/tkpathsea.mk + +install: install-exec install-data +uninstall: uninstall-exec uninstall-data + +distclean:: + $(RM) config.h + +install-exec: + $(SHELL) $(top_srcdir)/../mkinstalldirs $(bindir) + $(INSTALL_LIBTOOL_PROG) $(program) $(bindir) +# don't install ebb; we use the compatible version in dvipdfmx. +# but i guess we may as well keep building it for now. --karl, 23may08. +# $(INSTALL_LIBTOOL_PROG) ebb $(bindir) + $(INSTALL_SCRIPT) $(srcdir)/dvipdft $(bindir) + +uninstall-exec: + cd $(bindir); rm -f $(programs) + +install-data: + $(SHELL) $(top_srcdir)/../mkinstalldirs $(man1dir) + $(INSTALL_DATA) $(srcdir)/$(program).1 $(man1dir)/$(program).$(manext) + $(INSTALL_DATA) $(srcdir)/dvipdft.1 $(man1dir)/dvipdft.$(manext) + $(INSTALL_DATA) $(srcdir)/ebb.1 $(man1dir)/ebb.$(manext) + +uninstall-data: + rm -f $(man1dir)/dvilj.$(manext) + rm -f $(man1dir)/dvipdft.$(manext) + rm -f $(man1dir)/ebb.$(manext) + +kpse_include ../make/config.mk + +info dvi check: + +kpse_include ../make/clean.mk +kpse_include ../make/rdepend.mk +kpse_include depend.mk diff --git a/Build/source/texk/dvipdfm/ac/withenable.ac b/Build/source/texk/dvipdfm/ac/withenable.ac new file mode 100644 index 00000000000..ecfa3e417c5 --- /dev/null +++ b/Build/source/texk/dvipdfm/ac/withenable.ac @@ -0,0 +1,3 @@ +## texk/dvipdfm/ac/withenable.ac +## configure options and TL libraries required for dvipdfm +KPSE_WITH_PROG([dvipdfm], [kpathsea libpng]) diff --git a/Build/source/texk/dvipdfm/acinclude.m4.orig b/Build/source/texk/dvipdfm/acinclude.m4.orig new file mode 100644 index 00000000000..879c18301f2 --- /dev/null +++ b/Build/source/texk/dvipdfm/acinclude.m4.orig @@ -0,0 +1,105 @@ +# +# Local tests written by MAW +# +AC_DEFUN([AC_EXT_TIMEZONE], +[AC_MSG_CHECKING([whether time.h defines timezone as an external variable]) +AC_TRY_LINK([#include <time.h>], [ -timezone; ], + [AC_MSG_RESULT(yes) + AC_DEFINE([HAVE_TIMEZONE], 1, [define if <time.h> has timezone as an external variable])], + [AC_MSG_RESULT(no)])]) +AC_DEFUN([AC_HAVE_BASENAME], + [AC_MSG_CHECKING([whether basename is in either libgen.h or string.h]) + AC_TRY_COMPILE([#include <libgen.h> +#include <string.h>], [extern char basename(void)], + [AC_MSG_RESULT(no)], [AC_MSG_RESULT(yes); AC_DEFINE(HAVE_BASENAME)])]) +AC_DEFUN([AC_TZ_HAS_TM_GMTOFF], +[AC_MSG_CHECKING([whether struct tz has tm_gmtoff as a member]) +AC_TRY_COMPILE([#include <time.h>], [struct tm *tp; tp->tm_gmtoff], + [AC_MSG_RESULT(yes) + AC_DEFINE([HAVE_TM_GMTOFF], 1, [define if struct tm has tm_gmtoff as a member])], + [AC_MSG_RESULT(no)])]) +# +AC_DEFUN([AC_HAS_KPSE_FORMATS], + [AC_MSG_CHECKING([whether you have kpathsea headers and they whether they know about the required file formats]) + AC_TRY_COMPILE([#include <stdio.h> +#include <kpathsea/tex-file.h>], + [kpse_tex_ps_header_format; + kpse_type1_format;kpse_vf_format], + [AC_MSG_RESULT(yes) + AC_DEFINE([HAVE_KPSE_FORMATS], 1, [define if kpathsea supports type1 and vf formats])], + [AC_MSG_RESULT(no); +AC_MSG_ERROR([PS_HEADER and/or VF formats not found in Kpathsea header files. + +This version of dvipdfm requires that kpathsea and its headers be installed. +If you are sure they are installed and in a standard place, maybe you need a +newer version of kpathsea? You also might try setting the environment +variable CPPFLAGS (or CFLAGS) with -I pointing to the directory containing +the file "tex-file.h" + +])])]) +# +AC_DEFUN([AC_HAS_OMEGA_FORMATS], + [AC_MSG_CHECKING([whether your kpathsea supports Omega OFM file formats]) + AC_TRY_COMPILE([#include <stdio.h> +#include <kpathsea/tex-file.h>], + [kpse_ofm_format], + [AC_MSG_RESULT(yes) + AC_DEFINE([HAVE_OMEGA_FORMATS], 1, [Define if kpathsea understands Omega (OFM/OVF) formats])], + [AC_MSG_RESULT(no)])]) +AC_DEFUN([AC_HAS_TTF_FORMATS], + [AC_MSG_CHECKING([whether your kpathsea supports Truetype (TTF) file formats]) + AC_TRY_COMPILE([#include <stdio.h> +#include <kpathsea/tex-file.h>], + [kpse_truetype_format], + [AC_MSG_RESULT(yes) + AC_DEFINE([HAVE_TTF_FORMATS], 1 ,[define if kpathsea understands TrueType (TTF) formats]) + TTF_OPT=''], + [AC_MSG_RESULT(no)])]) +# +# Check for zlib +# +AC_DEFUN([AC_HAS_ZLIB], +[_cppflags=$CPPFLAGS + _ldflags=$LDFLAGS +AC_ARG_WITH(zlib, +[ --with-zlib=DIR use zlib include/library files from DIR],[ + if test -d "$withval"; then + CPPFLAGS="$CPPFLAGS -I$withval/include" + LDFLAGS="$LDFLAGS -L$withval/lib" + fi +]) +AC_MSG_CHECKING([for zlib header files]) +AC_TRY_COMPILE([#include <zlib.h>], [z_stream p;], +[AC_MSG_RESULT(yes) + AC_CHECK_LIB(z, compress, +[AC_DEFINE([HAVE_ZLIB], 1, [define if you have zlib and its headers]) + LIBS="$LIBS -lz" + AC_CHECK_LIB(z, compress2, +[AC_DEFINE([HAVE_ZLIB_COMPRESS2], 1, [define if your zlib has the compress2 function])])])], +[CPPFLAGS=$_cppflags + LDDFLAGS=$_ldflags + AC_MSG_RESULT(no)])]) +# +# Check for libpng +# +AC_DEFUN([AC_HAS_LIBPNG], +[_cppflags=$CPPFLAGS +_ldflags=$LDFLAGS +AC_ARG_WITH(png, +[ --with-png=DIR use png include/library files from DIR],[ + if test -d "$withval"; then + CPPFLAGS="$CPPFLAGS -I$withval/include" + LDFLAGS="$LDFLAGS -L$withval/lib" + fi +]) +AC_CHECK_FUNC(pow, , AC_CHECK_LIB(m, pow, LIBS="$LIBS -lm")) +AC_MSG_CHECKING([for png header files]) +AC_TRY_COMPILE([#include <png.h>], [png_infop p;], [ + AC_MSG_RESULT(yes) + AC_CHECK_LIB(png, png_get_image_width, [ + AC_DEFINE([HAVE_LIBPNG], 1, [define if you have libpng]) + LIBS="$LIBS -lpng"], , -lz)], [ + AC_MSG_RESULT(no)])]) +# +# End of local tests +# diff --git a/Build/source/texk/dvipdfm/configure.in.orig b/Build/source/texk/dvipdfm/configure.in.orig new file mode 100644 index 00000000000..26fef88d265 --- /dev/null +++ b/Build/source/texk/dvipdfm/configure.in.orig @@ -0,0 +1,58 @@ +dnl Process this file with autoconf to produce a configure script. +AC_INIT(dvipdfm.c) + +define([_version_],"0.13.2d") + +VERSION=_version_ +AC_SUBST(VERSION) +AC_DEFINE(VERSION, _version_, [package version]) +AC_DEFINE(PACKAGE, "dvipdfm", [package name]) + +AC_CONFIG_HEADERS([c-auto.h:c-auto.in], [date >stamp-auto]) + +dnl Checks for programs. +AC_PROG_CC +AC_PROG_CPP +AC_PROG_INSTALL +AC_PROG_LN_S +AC_PROG_MAKE_SET + +sinclude(../kpathsea/withenable.ac) +sinclude(../../libs/zlib/withenable.ac) +sinclude(../../libs/libpng/withenable.ac) +sinclude(../../libs/zlib/zlib.ac) +sinclude(../../libs/libpng/libpng.ac) + +AC_DEFINE([HAVE_KPATHSEA], 1, [define if you have kpathsea]) +AC_DEFINE([HAVE_XBASENAME], 1, [define if you have xbasename() in your libkpathsea instead of basename()]) +AC_DEFINE([HAVE_ZLIB], 1, [define if you have zlib and its headers]) +AC_DEFINE([HAVE_ZLIB_COMPRESS2], 1, [define if your zlib has the compress2 function]) +AC_DEFINE([HAVE_KPSE_FORMATS], 1, [define if kpathsea supports type1 and vf formats]) +AC_DEFINE([HAVE_OMEGA_FORMATS], 1, [Define if kpathsea understands Omega (OFM/OVF) formats]) +AC_DEFINE([HAVE_TTF_FORMATS], 1, [define if kpathsea understands TrueType (TTF) formats]) +AC_DEFINE([HAVE_LIBPNG], 1, [define if you have libpng]) +TTF_OPT='' +AC_SUBST(TTF_OPT) + +# TEXMF='${datadir}/texmf' +# AC_SUBST(TEXMF) + +dnl Checks for header files. +AC_HEADER_STDC +AC_CHECK_HEADERS(unistd.h) + +dnl Checks for typedefs, structures, and compiler characteristics. +AC_EXT_TIMEZONE +AC_TZ_HAS_TM_GMTOFF + +AC_C_CONST +AC_TYPE_SIZE_T +AC_STRUCT_TM + +dnl Checks for library functions. +AC_FUNC_MEMCMP +AC_CHECK_FUNCS(strspn system) +AC_CHECK_LIB(m, main) + +KPSE_CONFIG_FILES([Makefile]) +AC_OUTPUT diff --git a/Build/source/texk/dvipdfm/m4/maw-time.m4 b/Build/source/texk/dvipdfm/m4/maw-time.m4 new file mode 100644 index 00000000000..91a6c005ddd --- /dev/null +++ b/Build/source/texk/dvipdfm/m4/maw-time.m4 @@ -0,0 +1,34 @@ +# maw-time.m4 - timezone tests +# Copyright (C) 1998 - 2009 Mark A. Wicks <mwicks@kettering.edu> +# Kettering University +# +# This file is free software; the copyright holder +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# MAW_EXT_TIMEZONE +# ---------------- +AC_DEFUN([MAW_EXT_TIMEZONE], +[AC_MSG_CHECKING([whether time.h defines timezone as an external variable]) + AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <time.h>]], + [[-timezone;]])], + [AC_MSG_RESULT([yes]) + AC_DEFINE([HAVE_TIMEZONE], 1, + [Define if <time.h> has timezone as an external variable.])], + [AC_MSG_RESULT([no])]) +])# MAW_EXT_TIMEZONE + +# MAW_TM_HAS_TM_GMTOFF +# -------------------- +AC_DEFUN([MAW_TM_HAS_TM_GMTOFF], +[AC_MSG_CHECKING([whether struct tm has tm_gmtoff as a member]) + AC_LINK_IFELSE([AC_LANG_PROGRAM([[#include <time.h>]], + [[struct tm *tp; tp->tm_gmtoff;]])], + [AC_MSG_RESULT([yes]) + AC_DEFINE([HAVE_TM_GMTOFF], 1, + [Define if struct tm has tm_gmtoff as a member.])], + [AC_MSG_RESULT([no])]) +])# MAW_TM_HAS_TM_GMTOFF + diff --git a/Build/source/texk/dvipdfmx/Makefile.in.orig b/Build/source/texk/dvipdfmx/Makefile.in.orig new file mode 100644 index 00000000000..effbfe0fbf7 --- /dev/null +++ b/Build/source/texk/dvipdfmx/Makefile.in.orig @@ -0,0 +1,616 @@ +# Makefile.in generated by automake 1.10.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +subdir = . +DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in $(srcdir)/config.h.in \ + $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \ + TODO compile depcomp install-sh missing mkinstalldirs +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/cho-kpse.m4 \ + $(top_srcdir)/m4/cho-libs.m4 $(top_srcdir)/m4/maw-time.m4 \ + $(top_srcdir)/../../libs/zlib/withenable.ac \ + $(top_srcdir)/../../libs/zlib/zlib.ac \ + $(top_srcdir)/../../libs/libpng/withenable.ac \ + $(top_srcdir)/../../libs/libpng/libpng.ac \ + $(top_srcdir)/configure.in +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno config.status.lineno +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_HEADER = config.h +CONFIG_CLEAN_FILES = +SOURCES = +DIST_SOURCES = +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-dvi-recursive install-exec-recursive \ + install-html-recursive install-info-recursive \ + install-pdf-recursive install-ps-recursive install-recursive \ + installcheck-recursive installdirs-recursive pdf-recursive \ + ps-recursive uninstall-recursive +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = $(SUBDIRS) +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +am__remove_distdir = \ + { test ! -d $(distdir) \ + || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -fr $(distdir); }; } +DIST_ARCHIVES = $(distdir).tar.gz +GZIP_ENV = --best +distuninstallcheck_listfiles = find . -type f -print +distcleancheck_listfiles = find . -type f -print +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LDFLAGS = @LDFLAGS@ +LDLIBPNG = @LDLIBPNG@ +LDZLIB = @LDZLIB@ +LIBOBJS = @LIBOBJS@ +LIBPNGCPPFLAGS = @LIBPNGCPPFLAGS@ +LIBPNGDEP = @LIBPNGDEP@ +LIBS = @LIBS@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +OBJEXT = @OBJEXT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VERSION = @VERSION@ +ZLIBCPPFLAGS = @ZLIBCPPFLAGS@ +ZLIBDEP = @ZLIBDEP@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build_alias = @build_alias@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +dvipdfmx_LDFLAGS = @dvipdfmx_LDFLAGS@ +exec_prefix = @exec_prefix@ +host_alias = @host_alias@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +SUBDIRS = data src +ACLOCAL_AMFLAGS = -I m4 +all: config.h + $(MAKE) $(AM_MAKEFLAGS) all-recursive + +.SUFFIXES: +am--refresh: + @: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ + cd $(srcdir) && $(AUTOMAKE) --gnu \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) + +config.h: stamp-h1 + @if test ! -f $@; then \ + rm -f stamp-h1; \ + $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ + else :; fi + +stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status config.h +$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_srcdir) && $(AUTOHEADER) + rm -f stamp-h1 + touch $@ + +distclean-hdr: + -rm -f config.h stamp-h1 + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +$(RECURSIVE_CLEAN_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + $(am__remove_distdir) + test -d $(distdir) || mkdir $(distdir) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + distdir) \ + || exit 1; \ + fi; \ + done + -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r $(distdir) +dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + +dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 + $(am__remove_distdir) + +dist-lzma: distdir + tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma + $(am__remove_distdir) + +dist-tarZ: distdir + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__remove_distdir) + +dist-shar: distdir + shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz + $(am__remove_distdir) + +dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__remove_distdir) + +dist dist-all: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.lzma*) \ + unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac + chmod -R a-w $(distdir); chmod a+w $(distdir) + mkdir $(distdir)/_build + mkdir $(distdir)/_inst + chmod a-w $(distdir) + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && cd $(distdir)/_build \ + && ../configure --srcdir=.. --prefix="$$dc_install_base" \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck + $(am__remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' +distuninstallcheck: + @cd $(distuninstallcheck_dir) \ + && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am +check: check-recursive +all-am: Makefile config.h +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-recursive + +clean-am: clean-generic mostlyclean-am + +distclean: distclean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-hdr distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +info: info-recursive + +info-am: + +install-data-am: + +install-dvi: install-dvi-recursive + +install-exec-am: + +install-html: install-html-recursive + +install-info: install-info-recursive + +install-man: + +install-pdf: install-pdf-recursive + +install-ps: install-ps-recursive + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: + +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ + install-strip + +.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am am--refresh check check-am clean clean-generic \ + ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \ + dist-lzma dist-shar dist-tarZ dist-zip distcheck distclean \ + distclean-generic distclean-hdr distclean-tags distcleancheck \ + distdir distuninstallcheck dvi dvi-am html html-am info \ + info-am install install-am install-data install-data-am \ + install-dvi install-dvi-am install-exec install-exec-am \ + install-html install-html-am install-info install-info-am \ + install-man install-pdf install-pdf-am install-ps \ + install-ps-am install-strip installcheck installcheck-am \ + installdirs installdirs-am maintainer-clean \ + maintainer-clean-generic mostlyclean mostlyclean-generic pdf \ + pdf-am ps ps-am tags tags-recursive uninstall uninstall-am + + +# to regenerate autofiles, run +# aclocal -I m4 && autoconf && autoheader && automake +# tested with autoconf 2.62 and automake 1.10.1. --karl, 21apr08. +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/Build/source/texk/dvipdfmx/ac/withenable.ac b/Build/source/texk/dvipdfmx/ac/withenable.ac new file mode 100644 index 00000000000..201550211fa --- /dev/null +++ b/Build/source/texk/dvipdfmx/ac/withenable.ac @@ -0,0 +1,3 @@ +## texk/dvipdfmx/ac/withenable.ac +## configure options and TL libraries required for dvipdfmx +KPSE_WITH_PROG([dvipdfmx], [kpathsea libpng]) diff --git a/Build/source/texk/dvipdfmx/configure.in.orig b/Build/source/texk/dvipdfmx/configure.in.orig new file mode 100644 index 00000000000..b7d3b21514f --- /dev/null +++ b/Build/source/texk/dvipdfmx/configure.in.orig @@ -0,0 +1,149 @@ +dnl Process this file with autoconf to produce a configure script. +AC_INIT(src/dvipdfmx.c) +AM_INIT_AUTOMAKE(dvipdfmx, 20080607) +AM_CONFIG_HEADER(config.h) +AM_MAINTAINER_MODE + +dnl Checks for programs. +AC_PROG_CC +AM_PROG_CC_C_O +AM_PROG_CC_C_O +AC_PROG_INSTALL +AC_PROG_LN_S +AC_PROG_MAKE_SET + +AC_SYS_LARGEFILE +AC_FUNC_FSEEKO + +# Building inside teTeX or TeX Live? +AC_ARG_ENABLE(tetex-build, [ --enable-tetex-build build as part of a teTeX installation]) + + +dnl Check for kpathsea library. (required) +if test "x$enable_tetex_build" = xyes; then + # In teTeX and TeX Live, LDFLAGS is passed by texk/Makefile and + # reserved for the user. Therefore we need another variable for the + # loader flags to find the local kpathsea. We use dvipdfmx_LDFLAGS + # since Automake already sets that up in the link command. + dvipdfmx_LDFLAGS= + AC_SUBST(dvipdfmx_LDFLAGS) + + if test ! -d $srcdir/../../texk/kpathsea; then + AC_MSG_ERROR([ +========================================= + +You specified --enable-tetex-build, but I can't find the kpathsea +directory. I expected it to be in $srcdir/../../texk/kpathsea. + +=========================================]) + fi + CPPFLAGS="$CPPFLAGS -I\$(top_builddir)/../../texk -I\$(top_srcdir)/../../texk" + dvipdfmx_LDFLAGS="-L\$(top_builddir)/../../texk/kpathsea/.libs" + + AM_CONDITIONAL(TDS_VERSION_11, true) + AC_DEFINE([__TDS_VERSION__], 0x200406L) +else + dnl Don't bother going further if we don't have kpse installed. + AC_ARG_WITH(kpathsea, + [ --with-kpathsea=DIR use kpathsea include/library files from DIR], [ + if test -d "$withval"; then + CPPFLAGS="$CPPFLAGS -I$withval/include" + LDFLAGS="$LDFLAGS -L$withval/lib" + fi + ], [ + if test -d "$prefix"; then + CPPFLAGS="$CPPFLAGS -I$prefix/include" + LDFLAGS="$LDFLAGS -L$prefix/lib" + else + CPPFLAGS="$CPPFLAGS -I$ac_default_prefix/include" + LDFLAGS="$LDFLAGS -L$ac_default_prefix/lib" + fi + ]) + + AC_CHECK_LIB(kpathsea, kpse_find_file, [LIBS="-lkpathsea $LIBS"], + AC_MSG_ERROR([kpathsea library not found +This version of dvipdfmx requires the kpathsea library and its headers. If +you know where it is you might try setting the LDFLAGS environment variable +with -L pointing to the directory containing libkpathsea.a. + ]) + ) + + dnl Check kpathsea support for required formats and funcs. + CHO_CHECK_KPSE_SUPPORT([dvipdfmx]) + + dnl Check for TDS version kpathsea library supports. + CHO_CHECK_KPSE_TDS_VERSION +fi + + +dnl Checks for header files. +AC_HEADER_STDC +AC_CHECK_HEADERS(unistd.h) +AC_CHECK_HEADERS(stdint.h inttypes.h sys/types.h) + +dnl Checks for library functions. +AC_FUNC_MEMCMP +AC_CHECK_FUNCS(open close system getenv mkstemp basename) + +dnl Checks for typedefs, structures, and compiler characteristics. +MAW_EXT_TIMEZONE +MAW_TZ_HAS_TM_GMTOFF + +AC_C_CONST +AC_C_INLINE +AC_TYPE_SIZE_T +AC_STRUCT_TM +AC_STRUCT_TIMEZONE +AC_C_BIGENDIAN + +AC_CHECK_SIZEOF(char) +AC_CHECK_SIZEOF(short) +AC_CHECK_SIZEOF(int) +AC_CHECK_SIZEOF(long) + + +dnl Check for additional libraries. +if test "x$enable_tetex_build" = xyes; then + # Get these common libraries from the sources, too. + # Seems like it would be simpler to treat kpathsea this way too, but + # we're just starting from what lcdf-typetools did. + sinclude(../../libs/zlib/withenable.ac) + sinclude(../../libs/zlib/zlib.ac) + + sinclude(../../libs/libpng/withenable.ac) + sinclude(../../libs/libpng/libpng.ac) + + # yes, we have zlib and png. + AC_DEFINE(HAVE_ZLIB) + AC_DEFINE(HAVE_LIBPNG) + + # You must define HAVE_ZLIB_COMPRESS2 to enable '-z' option for controlling + # zlib compression level, but zlib.ac included above does not do this test. + # We assume zlib always has compress2() here although that's not always true. + AC_DEFINE([HAVE_ZLIB_COMPRESS2], 1) + + # tetex/tex live build; this always has kpathsea, xbasename, etc., + # as we're building from current sources. Do this stuff at the end so + # other configure tests don't try to link with kpathsea (which doesn't + # exist at configure time). + LIBS="-lkpathsea -lm $LIBS" + AC_MSG_NOTICE([tetex build enabled, LIBS now: $LIBS]) +else + CHO_HAS_LIBPAPER + CHO_HAS_ZLIB + CHO_HAS_LIBPNG + +dnl these variables are defined in the tetex case and used in src/Makefile.am. +dnl just let them be empty. + AC_SUBST(LIBPNGCPPFLAGS) + AC_SUBST(LDLIBPNG) + AC_SUBST(LIBPNGDEP) + AC_SUBST(ZLIBCPPFLAGS) + AC_SUBST(LDZLIB) + AC_SUBST(ZLIBDEP) + AC_SUBST(dvipdfmx_LDFLAGS) +fi + +AC_CONFIG_FILES([Makefile data/Makefile src/Makefile]) +AC_OUTPUT + diff --git a/Build/source/texk/dvipos/ac/withenable.ac b/Build/source/texk/dvipos/ac/withenable.ac new file mode 100644 index 00000000000..6419f1fef39 --- /dev/null +++ b/Build/source/texk/dvipos/ac/withenable.ac @@ -0,0 +1,3 @@ +## texk/dvipos/ac/withenable.ac +## configure options and TL libraries required for dvipos +KPSE_WITH_PROG([dvipos], [kpathsea]) diff --git a/Build/source/texk/dvipsk/Makefile.in.orig b/Build/source/texk/dvipsk/Makefile.in.orig new file mode 100644 index 00000000000..2c5c34d297b --- /dev/null +++ b/Build/source/texk/dvipsk/Makefile.in.orig @@ -0,0 +1,164 @@ +# @configure_input@ +# Makefile for dvipsk -- kb@mail.tug.org. Public domain. +version = 5.96dev + +# Add -DDEFRES=dpi to DEFS to change the default resolution from 600. +# Add -DSECURE if you will install dvips with special privileges. +# Add -DNO_DEBUG to omit debugging support. +# Add -DNO_EMTEX to omit EMTEX specials. +# Add -DNO_HPS to omit hypertex support. +# Add -DNO_TPIC to omit tpic support. +# +# For VM/CMS or (perhaps) VMS or DOS compilation, need the corresponding +# subdirectory from the original dvips distribution. (Maybe dvipsk +# won't work at all on such systems; if you have info one way or the +# other, please let kb@cs.umb.edu know.) + +kpse_include ../make/paths.mk +kpse_include ../make/common.mk +kpse_include ../make/programs.mk +kpse_include ../make/cross.mk +kpse_include ../make/texi.mk +prog_cflags = -DUNIX -DKPATHSEA -DNeedFunctionPrototypes -DSHIFTLOWCHARS + +# The `t[mp]-' business is so that we don't create an empty .pro file, +# if running squeeze fails for some reason. A dependency on squeeze +# fails here, so we include it below. +.SUFFIXES: .pro .lpro +.lpro.pro: + ./squeeze <$< >t-$@ + mv t-$@ $@ +prologues = tex.pro texps.pro texc.pro special.pro finclude.pro \ + color.pro crop.pro hps.pro + +objects = dospecial.o dviinput.o emspecial.o fontdef.o loadfont.o \ +dvips.o tfmload.o download.o prescan.o scanpage.o skippage.o output.o \ +scalewidth.o dosection.o dopage.o resident.o search.o unpack.o drawPS.o \ +header.o repack.o virtualfont.o dpicheck.o finclude.o writet1.o \ +pprescan.o papersiz.o color.o bbox.o hps.o t1part.o + +program = dvips +programs = afm2tfm $(program) + + +default all: $(programs) $(prologues) dvips.info + +$(program): $(kpathsea) $(objects) + $(kpathsea_link) $(objects) $(LOADLIBES) +afm2tfm: $(kpathsea) afm2tfm.o + $(kpathsea_link) afm2tfm.o $(LOADLIBES) +# Omit LOADLIBES since no need to dynamically link with kpathsea. +squeeze.o: squeeze.c + $(build_compile) -c $< +squeeze: squeeze.o + $(build_link_command) squeeze.o + +@MAINT@## # Temporarily disabled -- 2008-02-28 peb +@MAINT@## # The new version includes ptexlib.h. +@MAINT@## # Can't do this without adjusting CPPFLAGS! +@MAINT@## $(srcdir)/writet1.c: $(srcdir)/../web2c/pdftexdir/writet1.c +@MAINT@## cp -f $(srcdir)/../web2c/pdftexdir/writet1.c $@ + +@MAINT@## $(srcdir)/ptexmac.h: $(srcdir)/../web2c/pdftexdir/ptexmac.h +@MAINT@## cp -f $(srcdir)/../web2c/pdftexdir/ptexmac.h $@ + +$(prologues): squeeze +texc.lpro: texc.script tex.lpro + $(SHELL) $(srcdir)/texc.script $(srcdir)/tex.lpro $@ + +kpse_include ../make/tkpathsea.mk + +# The environment for running check. +# No need to specify TEXMF, as ../kpathsea/texmf.cnf should contain +# suitable absolute paths at this point. Those are converted to +# SELFAUTO* paths on installation. +checkenv = TEXMFCNF=../kpathsea \ + TFMFONTS=$(srcdir)/testdata: VFFONTS=$(srcdir)/testdata: \ + TEXPSHEADERS=$(srcdir)/testdata: TEXCONFIG=$(srcdir)/testdata: + +check: all + rm -f mtest.ps + -($(checkenv) ./dvips -D 300 $(srcdir)/testdata/dvipstst.xdv -o dvipstst.ps) + mv dvipstst.ps mtest.ps + -($(checkenv) ./dvips -D 300 $(srcdir)/testdata/dvipstst.xdv -o) + -diff $(srcdir)/testdata/dvipstst.xps dvipstst.ps + +install: install-exec install-data + $(POST_INSTALL) +# @echo "Create $(psheaderdir)/base/config.ps if necessary (see ./INSTALL)." +uninstall: uninstall-exec uninstall-data + +install-exec: all + $(SHELL) $(top_srcdir)/../mkinstalldirs $(bindir) + for p in $(programs); do $(INSTALL_LIBTOOL_PROG) $$p $(bindir); done + rm -f $(bindir)/o$(program) + ln -s $(program) $(bindir)/o$(program) +uninstall-exec: + for p in $(programs); do rm -f $(bindir)/$$p; done + rm -f $(bindir)/o$(program) + +# config.ps, encoding files, etc., are not installed here, since they +# need to go through the usual package mechanism. +install-data: $(program).info + $(SHELL) $(top_srcdir)/../mkinstalldirs $(man1dir) $(infodir) $(psheaderdir)/base +# PostScript prologues and encodings. + for h in $(prologues); do $(INSTALL_DATA) $$h $(psheaderdir)/base/$$h; done +# Info files. + $(INSTALL_DATA) $(srcdir)/$(program).i* $(infodir)/ +# Man pages. + $(INSTALL_DATA) $(srcdir)/$(program).1 $(man1dir)/$(program).$(manext) + rm -f $(man1dir)/o$(program).$(manext) + ln -s $(program).$(manext) $(man1dir)/o$(program).$(manext) + $(INSTALL_DATA) $(srcdir)/afm2tfm.1 $(man1dir)/afm2tfm.$(manext) +# Post. + $(POST_INSTALL) + if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \ + install-info --info-dir=$(infodir) $(infodir)/$(program).info; \ + else true; fi + +uninstall-data: + $(PRE_UNINSTALL) + if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \ + install-info --delete --info-dir=$(infodir) $(infodir)/$(program).info; \ + else true; fi + $(NORMAL_UNINSTALL) + rm -f $(infodir)/dvips.i* + rm -f $(man1dir)/dvips.$(manext) $(man1dir)/afm2tfm.$(manext) + +distname = dvipsk +program_files = *.texi *.info* *.lpro psfonts.map *.1 texc.script \ + dvips.help $(program).aux $(program).cps dvipstst.dvi +version_files = dvips.h afm2tfm.c dvips.c + +pre-dist-$(distname): INSTALL $(program).info $(program).dvi +post-dist-$(distname): + ln -s `pwd`/contrib `pwd`/tex $(distdir) + mkdir $(distdir)/reencode; ln -s $(fontname)/*.enc $(distdir)/reencode + ln -s `pwd`/README.reencode $(distdir)/reencode/README + rm -f $(distdir)/texc.lpro + +kpse_include ../make/dist.mk +kpse_include ../make/config.mk + +info: $(program).info +dvi: $(program).dvi + +@MAINT@INSTALL: $(program).texi +@MAINT@ $(MAKEINFO) -D INSTALLONLY --no-headers --no-split --no-validate \ +@MAINT@ $(MAKEINFO_FLAGS) $< -o $@ +@MAINT@ $(top_srcdir)/../add-info-toc $@ +@MAINT@$(program).info: dvips.help +@MAINT@dvips.help: dvips.c +@MAINT@ ./dvips --help >$@ +@MAINT@doc: info INSTALL + +kpse_include ../make/clean.mk + +distclean:: + rm -f *.pro texc.lpro + +clean:: + rm -f mtest.ps dvipstst.ps + +kpse_include ../make/rdepend.mk +kpse_include depend.mk diff --git a/Build/source/texk/dvipsk/ac/withenable.ac b/Build/source/texk/dvipsk/ac/withenable.ac new file mode 100644 index 00000000000..251dfa955fc --- /dev/null +++ b/Build/source/texk/dvipsk/ac/withenable.ac @@ -0,0 +1,3 @@ +## texk/dvipsk/ac/withenable.ac +## configure options and TL libraries required for dvipsk +KPSE_WITH_PROG([dvipsk], [kpathsea]) diff --git a/Build/source/texk/dvipsk/configure.in.orig b/Build/source/texk/dvipsk/configure.in.orig new file mode 100644 index 00000000000..92acfc45309 --- /dev/null +++ b/Build/source/texk/dvipsk/configure.in.orig @@ -0,0 +1,34 @@ +dnl Process this file with autoconf to produce a configure script. +AC_INIT(dvips.c) + +AC_CONFIG_HEADERS([c-auto.h:c-auto.in], [date >stamp-auto]) + +AC_PROG_CC +AC_PROG_INSTALL +AC_PROG_MAKE_SET +AC_PROG_LN_S + +# If libm is present, use it. +AC_CHECK_LIB(m, main,LIBS="$LIBS -lm") + + +sinclude(../kpathsea/withenable.ac) + +dnl These tests prevent reliable cross-compilation. Sigh. +dnl Some special hacks are used to make cross-compilation +dnl succeed in one special case. + +AC_UNSET_CC +AC_CHECK_SIZEOF(int) +AC_RESET_CC + +# If you're cross-compiling, these macros set up the variables in +# ../make/cross.mk: BUILDCC, BUILDCFLAGS, BUILDCCLD etc. +KPSE_CROSS_BUILD_VAR(CC, cc) +KPSE_CROSS_BUILD_VAR(CFLAGS, $(BUILDXCFLAGS)) +KPSE_CROSS_BUILD_VAR(CPPFLAGS, $(BUILDXCPPFLAGS)) +KPSE_CROSS_BUILD_VAR(LDFLAGS, $(BUILDXLDFLAGS)) +KPSE_CROSS_BUILD_VAR(CCLD, $(BUILDCC)) + +KPSE_CONFIG_FILES([Makefile]) +AC_OUTPUT diff --git a/Build/source/texk/gsftopk/Makefile.in.orig b/Build/source/texk/gsftopk/Makefile.in.orig new file mode 100644 index 00000000000..ca7916ed1dd --- /dev/null +++ b/Build/source/texk/gsftopk/Makefile.in.orig @@ -0,0 +1,64 @@ +# @configure_input@ +# Makefile for gsftopkk --kb@cs.umb.edu. Modified Yves.Arrouye@imag.fr +version = 1.19 + +program = gsftopk +default all: $(program) gsftopk.1 + +kpse_include ../make/paths.mk +kpse_include ../make/common.mk +kpse_include ../make/programs.mk + +gsftopkpsheaderdir = $(psheaderdir)/gsftopk + +# (Optional) The fully-qualified path of Ghostscript. +# GSPATH=-DGS=\"/usr/local/gnu/bin/gs\" + +# See INSTALL for compilation options. +DEFS = @DEFS@ $(XDEFS) $(GSPATH) -DKPATHSEA + +objects = gsftopk.o + + +$(program): $(kpathsea) $(objects) + $(kpathsea_link) $(objects) $(LOADLIBES) + +kpse_include ../make/tkpathsea.mk + +gsftopk.1: gsftopk1.sed sedscript + sed -f sedscript <$(srcdir)/gsftopk1.sed >$@ + +sedscript: mksedscript Makefile + $(SHELL) $(srcdir)/mksedscript $(DEFS) >$@ + +install: install-exec install-data +uninstall: uninstall-exec uninstall-data + +install-exec: $(program) + $(SHELL) $(top_srcdir)/../mkinstalldirs $(bindir) + $(INSTALL_LIBTOOL_PROG) $(program) $(bindir) +uninstall-exec: + rm -f $(bindir)/$(program) + +install-data: gsftopk.1 + $(SHELL) $(top_srcdir)/../mkinstalldirs $(man1dir) $(gsftopkpsheaderdir) + $(INSTALL_DATA) gsftopk.1 $(man1dir)/gsftopk.$(manext) + $(INSTALL_DATA) $(srcdir)/render.ps $(gsftopkpsheaderdir)/render.ps +uninstall-data: + rm -f $(man1dir)/gsftopk.$(manext) + rm -f $(gsftopkpsheaderdir)/render.ps + +kpse_include ../make/clean.mk + +clean:: + rm -f sedscript + +distclean:: + rm -f gsftopk.1 + +kpse_include ../make/config.mk + +info dvi check: + +kpse_include ../make/rdepend.mk +kpse_include depend.mk diff --git a/Build/source/texk/gsftopk/ac/withenable.ac b/Build/source/texk/gsftopk/ac/withenable.ac new file mode 100644 index 00000000000..94468941099 --- /dev/null +++ b/Build/source/texk/gsftopk/ac/withenable.ac @@ -0,0 +1,3 @@ +## texk/gsftopk/ac/withenable.ac +## configure options and TL libraries required for gsftopk +KPSE_WITH_PROG([gsftopk], [kpathsea]) diff --git a/Build/source/texk/gsftopk/configure.in.orig b/Build/source/texk/gsftopk/configure.in.orig new file mode 100644 index 00000000000..e81367859fa --- /dev/null +++ b/Build/source/texk/gsftopk/configure.in.orig @@ -0,0 +1,28 @@ +dnl Process this file with autoconf to produce a configure script. +AC_INIT(gsftopk.c) + +AC_CONFIG_HEADERS([c-auto.h:c-auto.in], [date >stamp-auto]) + +AC_PROG_CC +AC_PROG_INSTALL +AC_PROG_MAKE_SET +AC_PROG_LN_S + +sinclude(../kpathsea/withenable.ac) + +dnl Checks for header files. +AC_HEADER_SYS_WAIT +AC_HEADER_TIME +AC_CHECK_HEADERS([poll.h sys/time.h]) + +dnl Checks for library functions. +AC_FUNC_VFORK +AC_TYPE_SIGNAL +AC_CHECK_FUNCS([poll sigaction]) + +if test "$ac_cv_header_poll_h" = no || test "$ac_cv_func_poll" = no; then + AC_CHECK_HEADERS([sys/select.h select.h]) +fi + +KPSE_CONFIG_FILES([Makefile]) +AC_OUTPUT diff --git a/Build/source/texk/kpathsea/Makefile.in.orig b/Build/source/texk/kpathsea/Makefile.in.orig new file mode 100644 index 00000000000..3fb569e9f1c --- /dev/null +++ b/Build/source/texk/kpathsea/Makefile.in.orig @@ -0,0 +1,258 @@ +# $Id$ +# @configure_input@ +# Makefile for kpathsea. Public domain. +version = @KPSEVERSION@ + +# Add -DNO_DEBUG to disable debugging, for vanishingly better performance. + +kpse_include ../make/paths.mk +kpse_include ../make/makevars.mk +kpse_include ../make/common.mk +kpse_include ../make/library.mk +kpse_include ../make/programs.mk +kpse_include ../make/texi.mk + +@MAINT@warn_more = -Wmissing-prototypes -Wwrite-strings -Wshadow +@MAINT@MAKEINFO_FLAGS := $(MAKEINFO_FLAGS) --no-split + +# Install these header files (except acconfig.h). +install_headers = *.h $(srcdir)/*.h + +# Put tex-file.o first, because it's what depends on the paths, and may +# reduce frustration if the paths are wrong by doing it first. + +objects = tex-file.lo absolute.lo atou.lo cnf.lo concat.lo concat3.lo \ +concatn.lo db.lo debug.lo dir.lo elt-dirs.lo expand.lo extend-fname.lo \ +file-p.lo find-suffix.lo fn.lo fontmap.lo getopt.lo getopt1.lo hash.lo \ +kdefault.lo kpathsea.lo line.lo magstep.lo make-suffix.lo mingw32.lo path-elt.lo \ +pathsearch.lo proginit.lo progname.lo readable.lo rm-suffix.lo \ +str-list.lo str-llist.lo tex-glyph.lo tex-hush.lo tex-make.lo \ +tilde.lo truncate.lo uppercasify.lo variable.lo version.lo xbasename.lo \ +xcalloc.lo xdirname.lo xfopen.lo xfseek.lo xfseeko.lo xftell.lo xftello.lo xgetcwd.lo xmalloc.lo \ +xopendir.lo xputenv.lo xrealloc.lo xstat.lo xstrdup.lo $(liblobjs) $(malloc) +liblobjs = @LTLIBOBJS@ + +library = kpathsea + +# We want to compile almost everything with libtool ... +KPATHSEA_CC = $(LIBTOOL) --mode=compile $(CC) +.SUFFIXES: .lo +.c.lo: + $(KPATHSEA_CC) $(ALL_CFLAGS) -DMAKE_KPSE_DLL -c $< + +default all: kpsewhich kpsestat kpseaccess kpsereadlink $(library).info manfiles + +kpsewhich: $(kpathsea) kpsewhich.o + $(kpathsea_link) kpsewhich.o $(LOADLIBES) + +kpsestat: kpsestat.o + $(link_command) kpsestat.o + +kpseaccess: access.o + $(link_command) access.o + +kpsereadlink: readlink.o + $(link_command) readlink.o + +$(kpathsea): $(objects) + $(kpathsea_link) -rpath $(libdir) -version-info @KPSE_LT_VERS@ $(objects) + +# First null out comments and leading/trailing whitespace, then remove +# lines that define invalid C identifiers, then remove blank lines and +# lines that define lowercase values (those are never path values). Each +# line remaining looks like +# <name> = <value> +# (but = and surrounding spaces are optional, hence can't remove all spaces). +# Change this to #ifndef DEFAULT_name@#define DEFAULT_name "value"@#endif, +# then change the @'s to newlines (sed isn't good at multiline replacements). +# +# No backslash-newline escapes in the long sed replacement because that +# will turn into a space in the output. +# +# We replace the $TEXMF* references with nonexisting directories. These +# are the compile-time defaults and are not useful in the native TL +# builds; we rely completely on the self-location. (Previously, the +# random build-time paths would get included in the binaries, to +# consequent confusion.) +# +# We preserve the $SELFAUTO* references, since the selfauto-using +# compile-time path for cnf files is how texmf.cnf gets found, which +# determines everything else. +# +# The definition of DEFAULT_TEXMF (and other variables) +# that winds up in the final paths.h will not be used. +# +# We don't want to rewrite paths.h when we have only changed comments +# in texmf.cnf that have no effect on paths.h, since that would cause +# almost everything to be rebuilt. +# +# We also replace all semicolons with colons in the paths. +# The path-splitting code should be changed to understand both. +# +$(kpathsea_dir)/paths.h: stamp-paths +stamp-paths: $(srcdir)/texmf.cnf + echo "/* paths.h: Generated from texmf.cnf. */" >paths.tmp + sed -e 's/%.*//' -e 's/^[ ]*//' -e 's/[ ]*$$//' $(srcdir)/texmf.cnf \ + | grep '^[ ]*[A-Z0-9_]*[ =]' \ + | sed '/^$$/d' \ + | sed 's/^\([^ =]*\)[ ]*=*[ ]*\(.*\)/#ifndef DEFAULT_\1%#define DEFAULT_\1 "\2"%#endif/' \ + | tr '%' '\012' \ + | sed -e 's%\$$TEXMFCONFIG%/nonesuch/texmfconfig%g' \ + -e 's%\$$TEXMFDIST%/nonesuch/texmfdist%g' \ + -e 's%\$$TEXMFDOCDIR%/nonesuch/texmfdocdir%g' \ + -e 's%\$$TEXMFLOCAL%/nonesuch/texmflocal%g' \ + -e 's%\$$TEXMFMAIN%/nonesuch/texmfmain%g' \ + -e 's%\$$TEXMFSYSCONFIG%/nonesuch/texmfsysconfig%g' \ + -e 's%\$$TEXMFSYSVAR%/nonesuch/texmfsysvar%g' \ + -e 's%\$$TEXMFVAR%/nonesuch/texmfvar%g' \ + -e 's%\$$TEXMF%/nonesuch/texmf%g' \ + -e 's%\$$VARTEXFONTS%/nonesuch/vartexfonts%g' \ + | sed -e 's%;%:%g' \ + >>paths.tmp + @if cmp -s paths.h paths.tmp 2>/dev/null; then \ + echo "paths.h is unchanged"; \ + else \ + echo "cp paths.tmp paths.h"; \ + cp paths.tmp paths.h; \ + fi + rm -f paths.tmp + date >stamp-paths + +# Need an extra definition for this. Dependencies included below. +tex-file.o: + $(KPATHSEA_CC) -DDEFAULT_FONT_SIZES='\"$(default_texsizes)\"' $(srcdir)/tex-file.c + +check: kpsewhich + ./kpsewhich -expand-var '$$TEXMF' + +install: install-exec install-data +uninstall: uninstall-exec uninstall-data + +install-exec: kpsewhich + $(SHELL) $(top_srcdir)/../mkinstalldirs $(bindir) $(scriptdir) \ + $(libdir) $(web2cdir) + if grep 'original mktexpk --' $(scriptdir)/mktexpk >/dev/null 2>&1\ + || test ! -r $(scriptdir)/mktexpk; then \ + $(INSTALL_SCRIPT) $(srcdir)/mktexpk $(scriptdir)/mktexpk; \ + else true; fi + if grep 'original mktexmf --' $(scriptdir)/mktexmf >/dev/null 2>&1\ + || test ! -r $(scriptdir)/mktexmf; then \ + $(INSTALL_SCRIPT) $(srcdir)/mktexmf $(scriptdir)/mktexmf; \ + else true; fi + if grep 'original mktextfm --' $(scriptdir)/mktextfm >/dev/null 2>&1\ + || test ! -r $(scriptdir)/mktextfm; then \ + $(INSTALL_SCRIPT) $(srcdir)/mktextfm $(scriptdir)/mktextfm; \ + else true; fi + if grep 'original mktexlsr --' $(scriptdir)/mktexlsr >/dev/null 2>&1\ + || test ! -r $(scriptdir)/mktexlsr; then \ + $(INSTALL_SCRIPT) $(srcdir)/mktexlsr $(scriptdir)/mktexlsr; \ + else true; fi + $(INSTALL_DATA) $(srcdir)/mktex.opt $(web2cdir)/mktex.opt + $(INSTALL_SCRIPT) $(srcdir)/mktexdir $(web2cdir)/mktexdir + $(INSTALL_DATA) $(srcdir)/mktexdir.opt $(web2cdir)/mktexdir.opt + $(INSTALL_SCRIPT) $(srcdir)/mktexnam $(web2cdir)/mktexnam + $(INSTALL_DATA) $(srcdir)/mktexnam.opt $(web2cdir)/mktexnam.opt + $(INSTALL_SCRIPT) $(srcdir)/mktexupd $(web2cdir)/mktexupd + $(INSTALL_LIBTOOL_LIBS) lib$(library).la $(libdir) + $(INSTALL_LIBTOOL_PROG) kpsewhich $(bindir) + $(INSTALL_PROGRAM) kpsestat $(bindir) + $(INSTALL_PROGRAM) kpseaccess $(bindir) + $(INSTALL_PROGRAM) kpsereadlink $(bindir) +uninstall-exec: + $(UNINSTALL_LIBTOOL_LIBS) $(libdir)/lib$(library).la + $(UNINSTALL_LIBTOOL_PROG) $(bindir)/kpsewhich + $(UNINSTALL_PROGRAM) $(bindir)/kpsestat + $(UNINSTALL_PROGRAM) $(bindir)/kpseaccess + $(UNINSTALL_PROGRAM) $(bindir)/kpsereadlink + +install-data: $(srcdir)/texmf.cnf kpathsea.info install-man + $(SHELL) $(top_srcdir)/../mkinstalldirs $(texmf) $(infodir) $(web2cdir) + if grep 'original texmf.cnf --' $(web2cdir)/texmf.cnf >/dev/null 2>&1 \ + || test ! -r $(web2cdir)/texmf.cnf; then \ + $(INSTALL_DATA) $(srcdir)/texmf.cnf $(web2cdir)/texmf.cnf; \ + else true; fi +# Info files. + $(INSTALL_DATA) $(srcdir)/kpathsea.i* $(infodir)/ +# Should we install the headers? They are not just system-dependent, +# which is bad enough, but even compiler-dependent. + $(SHELL) $(top_srcdir)/../mkinstalldirs $(includedir)/kpathsea + for f in $(install_headers); do \ + $(INSTALL_DATA) $$f $(includedir)/kpathsea/; done + rm -f $(includedir)/kpathsea/acconfig.h +# Post. + $(POST_INSTALL) + if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \ + install-info --info-dir=$(infodir) $(infodir)/kpathsea.info; \ + else true; fi + +uninstall-data: + $(PRE_UNINSTALL) + if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \ + install-info --delete --info-dir=$(infodir) $(infodir)/kpathsea.info; \ + else true; fi + $(NORMAL_UNINSTALL) + rm -f $(infodir)/kpathsea.i* +# for f in $(install_headers); do rm -f $(includedir)/`basename $$f`; done + +# distdir is used by other distributions; they define $(distdir). +distdir: doc $(library).dvi $(library).h + rm -rf $(distdir) + mkdir -p $(distdir) + ln $(ln_files) $(distdir) + touch *.info* + ln mktex* *.info* *.texi *.ftp $(library).aux $(library).cps $(distdir) + rm -f $(distdir)/*.1 $(distdir)/*.man + ln *.man $(distdir) + ln BUGS README.CONFIGURE HIER PROJECTS *.ac $(distdir) + touch kpathsea.h # to avoid .cps.h rule on Solaris + cd $(distdir) && rm -f paths.h + +# I don't use this, but other programmers want it. acconfig.h is an +# autoheader input file, not an includable C header. Bad name. +$(library).h: always + rm -f $@ + echo '/* This is a generated file */' >$@ + echo '/* collecting all kpathsea headers. */' >>$@ + echo '#include <kpathsea/config.h>' >>$@ + ls -1 *.h \ + | grep -v '\(acconfig\|config\|kpathsea\|win32lib\)\.h' \ + | sed -e 's,^,#include <kpathsea/,' -e s',$$,>,' >>$@ + touch -r `ls -1t *.h | tail +2 | head -1` $@ +always: +.PHONY: always + +kpse_include ../make/config.mk + +info: $(library).info +dvi: $(library).dvi + +$(library).info: bugs.texi hier.texi install.texi unixtex.texi + +@MAINT@INSTALL: install.texi +@MAINT@ $(MAKEINFO) $(one_info) $(MAKEINFO_FLAGS) $< -o $@ +@MAINT@ $(top_srcdir)/../add-info-toc $@ +@MAINT@BUGS: bugs.texi +@MAINT@ $(MAKEINFO) $(one_info) $(MAKEINFO_FLAGS) $< -o $@ +@MAINT@ $(top_srcdir)/../add-info-toc $@ +@MAINT@HIER: hier.texi +@MAINT@ $(MAKEINFO) $(one_info) $(MAKEINFO_FLAGS) $< -o $@ +@MAINT@unixtex.ftp: unixtex.texi +@MAINT@ $(MAKEINFO) $(one_info) $(MAKEINFO_FLAGS) $< -o $@ +@MAINT@doc: info HIER BUGS INSTALL unixtex.ftp + +kpse_include ../make/clean.mk + +mostlyclean:: + rm -f kpsewhich kpsestat kpseaccess kpsereadlink *.lo + $(LIBTOOL) --mode=clean $(RM) lib$(library).la +distclean:: + rm -f paths.h stamp-paths + +# The manual pages +manfiles = kpseaccess.1 kpsestat.1 kpsewhich.1 kpsereadlink.1 \ + mktexlsr.1 mktexmf.1 mktextfm.1 mktexpk.1 + +kpse_include ../make/man.mk + +kpse_include ../make/rdepend.mk +kpse_include depend.mk diff --git a/Build/source/texk/kpathsea/common.ac.orig b/Build/source/texk/kpathsea/common.ac.orig new file mode 100644 index 00000000000..79d0789f750 --- /dev/null +++ b/Build/source/texk/kpathsea/common.ac.orig @@ -0,0 +1,117 @@ +dnl Public domain. +dnl Originally written by Karl Berry +dnl +dnl Common Autoconf sinclude file for kpathsea-using programs. (Have to +dnl use the m4 `sinclude' builtin instead of `include', since Autoconf +dnl disables `include'.) + +AC_PROG_CC +AC_PROG_INSTALL +AC_PROG_LN_S +AC_PROG_MAKE_SET + +sinclude(../libtool.m4) + +AC_PROG_LIBTOOL + +AC_SYS_LARGEFILE +AC_FUNC_FSEEKO + +AC_HEADER_DIRENT +AC_HEADER_STDC +AC_FUNC_CLOSEDIR_VOID +AC_CHECK_HEADERS([assert.h float.h limits.h memory.h pwd.h stdlib.h \ + string.h strings.h sys/param.h unistd.h]) +AC_CHECK_DECLS([putenv, strstr]) + +dnl Libtool supporting objects that may be required on ancient broken system. +AC_CHECK_FUNCS(putenv,, LTLIBOBJS="$LTLIBOBJS putenv.lo") +AC_CHECK_FUNCS(strcasecmp,, LTLIBOBJS="$LTLIBOBJS strcasecmp.lo") +AC_CHECK_FUNCS(strtol,, LTLIBOBJS="$LTLIBOBJS strtol.lo") +AC_CHECK_FUNCS(strstr,, LTLIBOBJS="$LTLIBOBJS strstr.lo") +AC_SUBST(LTLIBOBJS) + +AC_CHECK_FUNCS(bcmp bcopy bzero getcwd getwd index memcmp memcpy rindex strchr strrchr) + +AC_C_CONST + +# Check whether struct stat provides high-res time. +AC_CHECK_MEMBERS([struct stat.st_mtim]) + +# Check whether prototypes work. +AC_MSG_CHECKING(whether the compiler accepts prototypes) +AC_CACHE_VAL(kb_cv_c_prototypes, +[AC_TRY_COMPILE([#include <stdarg.h>], [extern void foo(int i,...);], + kb_cv_c_prototypes=yes, kb_cv_c_prototypes=no)])dnl +AC_MSG_RESULT($kb_cv_c_prototypes) +if test "$kb_cv_c_prototypes" = yes; then + AC_DEFINE([HAVE_PROTOTYPES], 1, + [Define to 1 if your compiler understands prototypes.]) +fi + +# This is a GNU libc invention. +AC_MSG_CHECKING([whether program_invocation_name is predefined]) +AC_CACHE_VAL([kb_cv_var_program_inv_name], +[AC_TRY_LINK(, + [extern char *program_invocation_name; program_invocation_name = "love";], + [kb_cv_var_program_inv_name=yes], [kb_cv_var_program_inv_name=no])])dnl +AC_MSG_RESULT([$kb_cv_var_program_inv_name]) +if test "$kb_cv_var_program_inv_name" = yes; then + AC_DEFINE([HAVE_PROGRAM_INVOCATION_NAME], 1, + [Define to 1 if you are using GNU libc or otherwise have global + variables `program_invocation_name' and `program_invocation_short_name'.]) +fi + +if test $ac_cv_func_getcwd = yes; then +# We only need to run this if we have getcwd. +AC_MSG_CHECKING([whether getcwd uses fork or vfork]) +AC_CACHE_VAL([kb_cv_func_getcwd_forks], +[AC_TRY_RUN([ +int fork() { exit(1); } +int vfork() { exit(1); } +extern char *getcwd(); +char path[100]; +int main() { +getcwd(path,100); +return 0; +}], [kb_cv_func_getcwd_forks=no], [kb_cv_func_getcwd_forks=yes], + [kb_cv_func_getcwd_forks=no])])dnl +AC_MSG_RESULT([$kb_cv_func_getcwd_forks]) +if test $kb_cv_func_getcwd_forks = yes; then + AC_DEFINE([GETCWD_FORKS], 1, + [Define to 1 if getcwd is implemented using fork or vfork. Let me know + if you have to add this by hand because configure failed to detect it.]) +fi +fi + +# Common --with and --enable options. +sinclude(../../texk/kpathsea/withenable.ac) + +# Implementation of those options. +AC_DEFUN([_KPSE_DEFINE_MAKE_BY_DEFAULT], +[if test "x$with_$1_default" = xyes; then + AC_DEFINE([MAKE_$2_BY_DEFAULT], 1, + [Define to 1 if you want to run $1 if $3 missing, and to 0 if you don't.]) +else + AC_DEFINE([MAKE_$2_BY_DEFAULT], 0) +fi +])# _KPSE_DEFINE_MAKE_BY_DEFAULT + +_KPSE_DEFINE_MAKE_BY_DEFAULT([mktexmf], [TEX_MF], [MF source]) +_KPSE_DEFINE_MAKE_BY_DEFAULT([mktexpk], [TEX_PK], [PK font]) +_KPSE_DEFINE_MAKE_BY_DEFAULT([mktextex], [TEX_TEX], [TeX source]) +_KPSE_DEFINE_MAKE_BY_DEFAULT([mktexfmt], [TEX_FMT], [format file]) +_KPSE_DEFINE_MAKE_BY_DEFAULT([mktextfm], [TEX_TFM], [TFM file]) +_KPSE_DEFINE_MAKE_BY_DEFAULT([mkocp], [OMEGA_OCP], [OCP file]) +_KPSE_DEFINE_MAKE_BY_DEFAULT([mkofm], [OMEGA_OFM], [OFM file]) + +# Is libm present. FIXME: do we need it at all? +AC_CHECK_LIB(m, main) + +# If you're cross-compiling, these macros set up the variables in +# ../make/cross.mk: BUILDCC, BUILDCFLAGS, BUILDCCLD etc. +KPSE_CROSS_BUILD_VAR(CC, cc) +KPSE_CROSS_BUILD_VAR(CFLAGS, $(BUILDXCFLAGS)) +KPSE_CROSS_BUILD_VAR(CPPFLAGS, $(BUILDXCPPFLAGS)) +KPSE_CROSS_BUILD_VAR(LDFLAGS, $(BUILDXLDFLAGS)) +KPSE_CROSS_BUILD_VAR(CCLD, $(BUILDCC)) diff --git a/Build/source/texk/kpathsea/configure.in.orig b/Build/source/texk/kpathsea/configure.in.orig new file mode 100644 index 00000000000..67c9b4b9bb2 --- /dev/null +++ b/Build/source/texk/kpathsea/configure.in.orig @@ -0,0 +1,73 @@ +dnl Process this file with autoconf to produce a configure script. +dnl +dnl Kpathsea package version: +dnl Starting development: +dnl kpse_devel_version = dev; +dnl Making releases: +dnl kpse_micro_version += 1; +dnl kpse_devel_version = ; +dnl +dnl Kpathsea shared library version: +dnl Only bug fixes: +dnl kpse_lib_micro += 1; +dnl Adding new interfaces (backwards compatible) +dnl kpse_lib_minor += 1; +dnl kpse_lib_micro = 0; +dnl Modifying or revoking interfaces (not backwards compatible) +dnl kpse_lib_major += 1; +dnl kpse_lib_minor = 0; +dnl kpse_lib_micro = 0; +dnl +m4_define([kpse_major_version], [3])[]dnl +m4_define([kpse_minor_version], [5])[]dnl +m4_define([kpse_micro_version], [7])[]dnl +m4_define([kpse_devel_version], [dev])[]dnl +m4_define([kpse_version], [kpse_major_version.kpse_minor_version.kpse_micro_version[]kpse_devel_version])[]dnl + +m4_define([kpse_lib_major], [5])[]dnl +m4_define([kpse_lib_minor], [0])[]dnl +m4_define([kpse_lib_micro], [0])[]dnl +m4_define([kpse_lt_version],[m4_eval(kpse_lib_major + kpse_lib_minor):kpse_lib_micro:kpse_lib_minor])[]dnl + +AC_INIT([kpathsea], [kpse_version], [tex-k@mail.tug.org]) +AC_CONFIG_SRCDIR([pathsearch.c]) + +AC_SUBST([KPSEVERSION], [kpse_version]) +AC_DEFINE([KPSEVERSION], ["kpathsea version kpse_version"]) +AC_SUBST([KPSE_LT_VERS], [kpse_lt_version]) + +dnl Write output here, instead of putting a zillion -D's on the command line. +AC_CONFIG_HEADERS([c-auto.h:c-auto.in], + [sed 's/^#define PACKAGE_/#define KPSE_PACKAGE_/' c-auto.h >c-auto.tmp && mv -f c-auto.tmp c-auto.h + date >stamp-auto]) + +sinclude(common.ac) + +AH_TOP([/* c-auto.h: defines for kpathsea, as determined by configure. + + Copyright 1994-97, 2008 Karl Berry. + Copyright 1997-99, 2002, 2005 Olaf Weber. + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public License + along with this library; if not, see <http://www.gnu.org/licenses/>. */ + +/* Guard against double inclusion. */ +#ifndef KPATHSEA_C_AUTO_H +#define KPATHSEA_C_AUTO_H + +/* kpathsea: the version string. */ +#define KPSEVERSION "REPLACE-WITH-KPSEVERSION"]) +AH_BOTTOM([#endif /* !KPATHSEA_C_AUTO_H */]) + +KPSE_CONFIG_FILES([Makefile]) +AC_OUTPUT diff --git a/Build/source/texk/lacheck/ac/withenable.ac b/Build/source/texk/lacheck/ac/withenable.ac new file mode 100644 index 00000000000..b1e20cd2fae --- /dev/null +++ b/Build/source/texk/lacheck/ac/withenable.ac @@ -0,0 +1,3 @@ +## texk/lacheck/ac/withenable.ac +## configure options and TL libraries required for lacheck +KPSE_WITH_PROG([lacheck], [kpathsea]) diff --git a/Build/source/texk/makeindexk/Makefile.in.orig b/Build/source/texk/makeindexk/Makefile.in.orig new file mode 100644 index 00000000000..d3c5f49aaa2 --- /dev/null +++ b/Build/source/texk/makeindexk/Makefile.in.orig @@ -0,0 +1,54 @@ +# @configure_input@ +# Makefile for makeindexk --te@dbs.uni-hannover.de. Public domain. +version = 2.13 + +kpse_include ../make/paths.mk +kpse_include ../make/common.mk +kpse_include ../make/programs.mk + +objects = genind.o mkind.o qsort.o scanid.o scanst.o sortid.o +program = makeindex +programs = $(program) + +default all: $(programs) + +$(program): $(kpathsea) $(objects) + $(kpathsea_link) $(objects) $(LOADLIBES) +kpse_include ../make/tkpathsea.mk + +install: install-exec install-data +uninstall: uninstall-exec uninstall-data + +install-exec: $(programs) + $(SHELL) $(top_srcdir)/../mkinstalldirs $(bindir) + $(INSTALL_LIBTOOL_PROG) $(program) $(bindir) + $(INSTALL_SCRIPT) $(srcdir)/mkindex $(scriptdir)/mkindex +uninstall-exec: + cd $(bindir) && rm -f $(program) + cd $(scriptdir) && rm -f mkindex + +install-data: makeindex.1 + $(SHELL) $(top_srcdir)/../mkinstalldirs $(man1dir) + $(INSTALL_DATA) $(srcdir)/makeindex.1 $(man1dir)/makeindex.$(manext) + $(INSTALL_DATA) $(srcdir)/mkindex.1 $(man1dir)/mkindex.$(manext) + +uninstall-data: + +distname = makeindex +program_files = +version_files = + +pre-dist-$(distname): +post-dist-$(distname): + +kpse_include ../make/dist.mk +kpse_include ../make/config.mk + +info dvi check: + +kpse_include ../make/clean.mk + +distclean:: + +kpse_include ../make/rdepend.mk +kpse_include depend.mk diff --git a/Build/source/texk/makeindexk/ac/withenable.ac b/Build/source/texk/makeindexk/ac/withenable.ac new file mode 100644 index 00000000000..ca58bc1bbe5 --- /dev/null +++ b/Build/source/texk/makeindexk/ac/withenable.ac @@ -0,0 +1,3 @@ +## texk/makeindexk/ac/withenable.ac +## configure options and TL libraries required for makeindexk +KPSE_WITH_PROG([makeindexk], [kpathsea]) diff --git a/Build/source/texk/makeindexk/configure.in.orig b/Build/source/texk/makeindexk/configure.in.orig new file mode 100644 index 00000000000..434e56f1008 --- /dev/null +++ b/Build/source/texk/makeindexk/configure.in.orig @@ -0,0 +1,18 @@ +dnl Process this file with autoconf to produce a configure script. +AC_INIT(mkind.c) + +AC_CONFIG_HEADERS([c-auto.h:c-auto.in], [date >stamp-auto]) + +AC_PROG_CC +AC_PROG_INSTALL +AC_PROG_MAKE_SET +AC_PROG_LN_S + +sinclude(../kpathsea/withenable.ac) + +AC_ARG_PROGRAM +AC_HAVE_HEADERS(ctype.h types.h locale.h) +AC_CHECK_FUNCS(strchr strrchr setlocale) + +KPSE_CONFIG_FILES([Makefile]) +AC_OUTPUT diff --git a/Build/source/texk/musixflx/Makefile.in.orig b/Build/source/texk/musixflx/Makefile.in.orig new file mode 100644 index 00000000000..52beb1f7037 --- /dev/null +++ b/Build/source/texk/musixflx/Makefile.in.orig @@ -0,0 +1,42 @@ +# @configure_input@ +# Makefile for musixflx. Public domain. +kpse_include ../make/paths.mk +kpse_include ../make/common.mk +kpse_include ../make/programs.mk + +prog_cflags = -DUNIX -DKPATHSEA -DNeedFunctionPrototypes + +program = musixflx +objects = musixflx.o + +programs = $(program) + +default: $(program) +all: $(program) + +$(program): $(objects) + $(kpathsea_link) $(objects) + +install: install-exec + +uninstall: uninstall-exec + +install-exec: all + $(SHELL) $(top_srcdir)/../mkinstalldirs $(bindir) + for p in $(programs); do $(INSTALL_LIBTOOL_PROG) $$p $(bindir); done +uninstall-exec: + for p in $(programs); do rm -f $(bindir)/$$p; done + +install-data: + +uninstall-data: + +kpse_include ../make/dist.mk +kpse_include ../make/config.mk + +info dvi check: + +kpse_include ../make/clean.mk +kpse_include ../make/rdepend.mk +kpse_include depend.mk + diff --git a/Build/source/texk/musixflx/ac/withenable.ac b/Build/source/texk/musixflx/ac/withenable.ac new file mode 100644 index 00000000000..520e1ed0b12 --- /dev/null +++ b/Build/source/texk/musixflx/ac/withenable.ac @@ -0,0 +1,3 @@ +## texk/musixflx/ac/withenable.ac +## configure options and TL libraries required for musixflx +KPSE_WITH_PROG([musixflx]) diff --git a/Build/source/texk/musixflx/configure.in.orig b/Build/source/texk/musixflx/configure.in.orig new file mode 100644 index 00000000000..ee2b36b9d30 --- /dev/null +++ b/Build/source/texk/musixflx/configure.in.orig @@ -0,0 +1,14 @@ +dnl Public domain. +dnl Process this file with autoconf to produce a configure script. + +AC_INIT(musixflx.c) +AC_CONFIG_HEADERS([c-auto.h:c-auto.in], [date >stamp-auto]) + +sinclude(../kpathsea/common.ac) + +dnl These tests prevent reliable cross-compilation. Sigh. +AC_C_CHAR_UNSIGNED +AC_CHECK_SIZEOF(long) + +KPSE_CONFIG_FILES([Makefile]) +AC_OUTPUT diff --git a/Build/source/texk/one/Makefile.am b/Build/source/texk/one/Makefile.am new file mode 100644 index 00000000000..68deed99684 --- /dev/null +++ b/Build/source/texk/one/Makefile.am @@ -0,0 +1,24 @@ +## +ACLOCAL_AMFLAGS = -I ../../m4 + +INCLUDES = $(XPDF_INCLUDES) $(FREETYPE2_INCLUDES) $(LIBPNG_INCLUDES) +INCLUDES += $(OBSDCOMPAT_INCLUDES) $(MD5_INCLUDES) $(ZLIB_INCLUDES) +LIBS = $(XPDF_LIBS) $(FREETYPE2_LIBS) $(LIBPNG_LIBS) +LIBS += $(OBSDCOMPAT_LIBS) $(MD5_LIBS) $(ZLIB_LIBS) + +bin_PROGRAMS = progone + +progone_SOURCES = one.c + +@ZLIB_RULE@ +@OBSDCOMPAT_RULE@ +@LIBPNG_RULE@ +@T1LIB_RULE@ +@FREETYPE2_RULE@ +@GD_RULE@ +@XPDF_RULE@ +@GRAPHITE_RULE@ +@TECKIT_RULE@ + +TESTS = progone + diff --git a/Build/source/texk/one/Makefile.in b/Build/source/texk/one/Makefile.in new file mode 100644 index 00000000000..5a7c6dce781 --- /dev/null +++ b/Build/source/texk/one/Makefile.in @@ -0,0 +1,764 @@ +# Makefile.in generated by automake 1.10.2 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +bin_PROGRAMS = progone$(EXEEXT) +TESTS = progone$(EXEEXT) +subdir = . +DIST_COMMON = $(am__configure_deps) \ + $(srcdir)/../../build-aux/config.guess \ + $(srcdir)/../../build-aux/config.sub \ + $(srcdir)/../../build-aux/depcomp \ + $(srcdir)/../../build-aux/install-sh \ + $(srcdir)/../../build-aux/ltmain.sh \ + $(srcdir)/../../build-aux/missing $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in $(srcdir)/config.h.in \ + $(top_srcdir)/configure ../../build-aux/config.guess \ + ../../build-aux/config.sub ../../build-aux/depcomp \ + ../../build-aux/install-sh ../../build-aux/ltmain.sh \ + ../../build-aux/missing ../../build-aux/texinfo.tex \ + ../../build-aux/ylwrap +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/../../m4/kpse-common.m4 \ + $(top_srcdir)/../../m4/kpse-freetype2-flags.m4 \ + $(top_srcdir)/../../m4/kpse-gd-flags.m4 \ + $(top_srcdir)/../../m4/kpse-graphite-flags.m4 \ + $(top_srcdir)/../../m4/kpse-libpng-flags.m4 \ + $(top_srcdir)/../../m4/kpse-obsdcompat-flags.m4 \ + $(top_srcdir)/../../m4/kpse-t1lib-flags.m4 \ + $(top_srcdir)/../../m4/kpse-teckit-flags.m4 \ + $(top_srcdir)/../../m4/kpse-xpdf-flags.m4 \ + $(top_srcdir)/../../m4/kpse-zlib-flags.m4 \ + $(top_srcdir)/../../m4/libtool.m4 \ + $(top_srcdir)/../../m4/ltoptions.m4 \ + $(top_srcdir)/../../m4/ltsugar.m4 \ + $(top_srcdir)/../../m4/ltversion.m4 \ + $(top_srcdir)/../../m4/lt~obsolete.m4 \ + $(top_srcdir)/configure.ac +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno config.status.lineno +mkinstalldirs = $(install_sh) -d +CONFIG_HEADER = config.h +CONFIG_CLEAN_FILES = +am__installdirs = "$(DESTDIR)$(bindir)" +binPROGRAMS_INSTALL = $(INSTALL_PROGRAM) +PROGRAMS = $(bin_PROGRAMS) +am_progone_OBJECTS = one.$(OBJEXT) +progone_OBJECTS = $(am_progone_OBJECTS) +progone_LDADD = $(LDADD) +DEFAULT_INCLUDES = -I.@am__isrc@ +depcomp = $(SHELL) $(top_srcdir)/../../build-aux/depcomp +am__depfiles_maybe = depfiles +COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ + $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +LTCOMPILE = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ + --mode=compile $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \ + $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +CCLD = $(CC) +LINK = $(LIBTOOL) --tag=CC $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) \ + --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) \ + $(LDFLAGS) -o $@ +SOURCES = $(progone_SOURCES) +DIST_SOURCES = $(progone_SOURCES) +ETAGS = etags +CTAGS = ctags +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +am__remove_distdir = \ + { test ! -d $(distdir) \ + || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -fr $(distdir); }; } +DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2 +GZIP_ENV = --best +distuninstallcheck_listfiles = find . -type f -print +distcleancheck_listfiles = find . -type f -print +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DSYMUTIL = @DSYMUTIL@ +DUMPBIN = @DUMPBIN@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +FGREP = @FGREP@ +FREETYPE2_DEPEND = @FREETYPE2_DEPEND@ +FREETYPE2_INCLUDES = @FREETYPE2_INCLUDES@ +FREETYPE2_LIBS = @FREETYPE2_LIBS@ +GD_DEPEND = @GD_DEPEND@ +GD_INCLUDES = @GD_INCLUDES@ +GD_LIBS = @GD_LIBS@ +GRAPHITE_DEPEND = @GRAPHITE_DEPEND@ +GRAPHITE_INCLUDES = @GRAPHITE_INCLUDES@ +GRAPHITE_LIBS = @GRAPHITE_LIBS@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LD = @LD@ +LDFLAGS = @LDFLAGS@ +LIBOBJS = @LIBOBJS@ +LIBPNG_DEPEND = @LIBPNG_DEPEND@ +LIBPNG_INCLUDES = @LIBPNG_INCLUDES@ +LIBPNG_LIBS = @LIBPNG_LIBS@ +LIBS = $(XPDF_LIBS) $(FREETYPE2_LIBS) $(LIBPNG_LIBS) \ + $(OBSDCOMPAT_LIBS) $(MD5_LIBS) $(ZLIB_LIBS) +LIBTOOL = @LIBTOOL@ +LIPO = @LIPO@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +NM = @NM@ +NMEDIT = @NMEDIT@ +OBJDUMP = @OBJDUMP@ +OBJEXT = @OBJEXT@ +OBSDCOMPAT_DEPEND = @OBSDCOMPAT_DEPEND@ +OBSDCOMPAT_INCLUDES = @OBSDCOMPAT_INCLUDES@ +OBSDCOMPAT_LIBS = @OBSDCOMPAT_LIBS@ +OTOOL = @OTOOL@ +OTOOL64 = @OTOOL64@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +T1LIB_DEPEND = @T1LIB_DEPEND@ +T1LIB_INCLUDES = @T1LIB_INCLUDES@ +T1LIB_LIBS = @T1LIB_LIBS@ +TECKIT_DEPEND = @TECKIT_DEPEND@ +TECKIT_INCLUDES = @TECKIT_INCLUDES@ +TECKIT_LIBS = @TECKIT_LIBS@ +VERSION = @VERSION@ +XPDF_DEPEND = @XPDF_DEPEND@ +XPDF_INCLUDES = @XPDF_INCLUDES@ +XPDF_LIBS = @XPDF_LIBS@ +ZLIB_DEPEND = @ZLIB_DEPEND@ +ZLIB_INCLUDES = @ZLIB_INCLUDES@ +ZLIB_LIBS = @ZLIB_LIBS@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_DUMPBIN = @ac_ct_DUMPBIN@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +lt_ECHO = @lt_ECHO@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +ACLOCAL_AMFLAGS = -I ../../m4 +INCLUDES = $(XPDF_INCLUDES) $(FREETYPE2_INCLUDES) $(LIBPNG_INCLUDES) \ + $(OBSDCOMPAT_INCLUDES) $(MD5_INCLUDES) $(ZLIB_INCLUDES) +progone_SOURCES = one.c +all: config.h + $(MAKE) $(AM_MAKEFLAGS) all-am + +.SUFFIXES: +.SUFFIXES: .c .lo .o .obj +am--refresh: + @: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \ + cd $(srcdir) && $(AUTOMAKE) --foreign \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --foreign Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) + +config.h: stamp-h1 + @if test ! -f $@; then \ + rm -f stamp-h1; \ + $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ + else :; fi + +stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status config.h +$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_srcdir) && $(AUTOHEADER) + rm -f stamp-h1 + touch $@ + +distclean-hdr: + -rm -f config.h stamp-h1 +install-binPROGRAMS: $(bin_PROGRAMS) + @$(NORMAL_INSTALL) + test -z "$(bindir)" || $(MKDIR_P) "$(DESTDIR)$(bindir)" + @list='$(bin_PROGRAMS)'; for p in $$list; do \ + p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ + if test -f $$p \ + || test -f $$p1 \ + ; then \ + f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ + echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(bindir)/$$f'"; \ + $(INSTALL_PROGRAM_ENV) $(LIBTOOL) $(AM_LIBTOOLFLAGS) $(LIBTOOLFLAGS) --mode=install $(binPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(bindir)/$$f" || exit 1; \ + else :; fi; \ + done + +uninstall-binPROGRAMS: + @$(NORMAL_UNINSTALL) + @list='$(bin_PROGRAMS)'; for p in $$list; do \ + f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ + echo " rm -f '$(DESTDIR)$(bindir)/$$f'"; \ + rm -f "$(DESTDIR)$(bindir)/$$f"; \ + done + +clean-binPROGRAMS: + @list='$(bin_PROGRAMS)'; for p in $$list; do \ + f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ + echo " rm -f $$p $$f"; \ + rm -f $$p $$f ; \ + done +progone$(EXEEXT): $(progone_OBJECTS) $(progone_DEPENDENCIES) + @rm -f progone$(EXEEXT) + $(LINK) $(progone_OBJECTS) $(progone_LDADD) $(LIBS) + +mostlyclean-compile: + -rm -f *.$(OBJEXT) + +distclean-compile: + -rm -f *.tab.c + +@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/one.Po@am__quote@ + +.c.o: +@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c $< + +.c.obj: +@am__fastdepCC_TRUE@ $(COMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'` +@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` + +.c.lo: +@am__fastdepCC_TRUE@ $(LTCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $< +@am__fastdepCC_TRUE@ mv -f $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Plo +@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ +@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ +@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool config.lt + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +check-TESTS: $(TESTS) + @failed=0; all=0; xfail=0; xpass=0; skip=0; \ + srcdir=$(srcdir); export srcdir; \ + list=' $(TESTS) '; \ + if test -n "$$list"; then \ + for tst in $$list; do \ + if test -f ./$$tst; then dir=./; \ + elif test -f $$tst; then dir=; \ + else dir="$(srcdir)/"; fi; \ + if $(TESTS_ENVIRONMENT) $${dir}$$tst; then \ + all=`expr $$all + 1`; \ + case " $(XFAIL_TESTS) " in \ + *[\ \ ]$$tst[\ \ ]*) \ + xpass=`expr $$xpass + 1`; \ + failed=`expr $$failed + 1`; \ + echo "XPASS: $$tst"; \ + ;; \ + *) \ + echo "PASS: $$tst"; \ + ;; \ + esac; \ + elif test $$? -ne 77; then \ + all=`expr $$all + 1`; \ + case " $(XFAIL_TESTS) " in \ + *[\ \ ]$$tst[\ \ ]*) \ + xfail=`expr $$xfail + 1`; \ + echo "XFAIL: $$tst"; \ + ;; \ + *) \ + failed=`expr $$failed + 1`; \ + echo "FAIL: $$tst"; \ + ;; \ + esac; \ + else \ + skip=`expr $$skip + 1`; \ + echo "SKIP: $$tst"; \ + fi; \ + done; \ + if test "$$all" -eq 1; then \ + tests="test"; \ + All=""; \ + else \ + tests="tests"; \ + All="All "; \ + fi; \ + if test "$$failed" -eq 0; then \ + if test "$$xfail" -eq 0; then \ + banner="$$All$$all $$tests passed"; \ + else \ + if test "$$xfail" -eq 1; then failures=failure; else failures=failures; fi; \ + banner="$$All$$all $$tests behaved as expected ($$xfail expected $$failures)"; \ + fi; \ + else \ + if test "$$xpass" -eq 0; then \ + banner="$$failed of $$all $$tests failed"; \ + else \ + if test "$$xpass" -eq 1; then passes=pass; else passes=passes; fi; \ + banner="$$failed of $$all $$tests did not behave as expected ($$xpass unexpected $$passes)"; \ + fi; \ + fi; \ + dashes="$$banner"; \ + skipped=""; \ + if test "$$skip" -ne 0; then \ + if test "$$skip" -eq 1; then \ + skipped="($$skip test was not run)"; \ + else \ + skipped="($$skip tests were not run)"; \ + fi; \ + test `echo "$$skipped" | wc -c` -le `echo "$$banner" | wc -c` || \ + dashes="$$skipped"; \ + fi; \ + report=""; \ + if test "$$failed" -ne 0 && test -n "$(PACKAGE_BUGREPORT)"; then \ + report="Please report to $(PACKAGE_BUGREPORT)"; \ + test `echo "$$report" | wc -c` -le `echo "$$banner" | wc -c` || \ + dashes="$$report"; \ + fi; \ + dashes=`echo "$$dashes" | sed s/./=/g`; \ + echo "$$dashes"; \ + echo "$$banner"; \ + test -z "$$skipped" || echo "$$skipped"; \ + test -z "$$report" || echo "$$report"; \ + echo "$$dashes"; \ + test "$$failed" -eq 0; \ + else :; fi + +distdir: $(DISTFILES) + $(am__remove_distdir) + test -d $(distdir) || mkdir $(distdir) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r $(distdir) +dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) +dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 + $(am__remove_distdir) + +dist-lzma: distdir + tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma + $(am__remove_distdir) + +dist-tarZ: distdir + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__remove_distdir) + +dist-shar: distdir + shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz + $(am__remove_distdir) + +dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__remove_distdir) + +dist dist-all: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 + $(am__remove_distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.lzma*) \ + unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac + chmod -R a-w $(distdir); chmod a+w $(distdir) + mkdir $(distdir)/_build + mkdir $(distdir)/_inst + chmod a-w $(distdir) + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && cd $(distdir)/_build \ + && ../configure --srcdir=.. --prefix="$$dc_install_base" \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck + $(am__remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' +distuninstallcheck: + @cd $(distuninstallcheck_dir) \ + && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am + $(MAKE) $(AM_MAKEFLAGS) check-TESTS +check: check-am +all-am: Makefile $(PROGRAMS) config.h +installdirs: + for dir in "$(DESTDIR)$(bindir)"; do \ + test -z "$$dir" || $(MKDIR_P) "$$dir"; \ + done +install: install-am +install-exec: install-exec-am +install-data: install-data-am +uninstall: uninstall-am + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-am +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-am + +clean-am: clean-binPROGRAMS clean-generic clean-libtool mostlyclean-am + +distclean: distclean-am + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf ./$(DEPDIR) + -rm -f Makefile +distclean-am: clean-am distclean-compile distclean-generic \ + distclean-hdr distclean-libtool distclean-tags + +dvi: dvi-am + +dvi-am: + +html: html-am + +info: info-am + +info-am: + +install-data-am: + +install-dvi: install-dvi-am + +install-exec-am: install-binPROGRAMS + +install-html: install-html-am + +install-info: install-info-am + +install-man: + +install-pdf: install-pdf-am + +install-ps: install-ps-am + +installcheck-am: + +maintainer-clean: maintainer-clean-am + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -rf ./$(DEPDIR) + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-am + +mostlyclean-am: mostlyclean-compile mostlyclean-generic \ + mostlyclean-libtool + +pdf: pdf-am + +pdf-am: + +ps: ps-am + +ps-am: + +uninstall-am: uninstall-binPROGRAMS + +.MAKE: install-am install-strip + +.PHONY: CTAGS GTAGS all all-am am--refresh check check-TESTS check-am \ + clean clean-binPROGRAMS clean-generic clean-libtool ctags dist \ + dist-all dist-bzip2 dist-gzip dist-lzma dist-shar dist-tarZ \ + dist-zip distcheck distclean distclean-compile \ + distclean-generic distclean-hdr distclean-libtool \ + distclean-tags distcleancheck distdir distuninstallcheck dvi \ + dvi-am html html-am info info-am install install-am \ + install-binPROGRAMS install-data install-data-am install-dvi \ + install-dvi-am install-exec install-exec-am install-html \ + install-html-am install-info install-info-am install-man \ + install-pdf install-pdf-am install-ps install-ps-am \ + install-strip installcheck installcheck-am installdirs \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ + pdf pdf-am ps ps-am tags uninstall uninstall-am \ + uninstall-binPROGRAMS + + +@ZLIB_RULE@ +@OBSDCOMPAT_RULE@ +@LIBPNG_RULE@ +@T1LIB_RULE@ +@FREETYPE2_RULE@ +@GD_RULE@ +@XPDF_RULE@ +@GRAPHITE_RULE@ +@TECKIT_RULE@ +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/Build/source/texk/one/ac/withenable.ac b/Build/source/texk/one/ac/withenable.ac new file mode 100644 index 00000000000..a9e5e93e922 --- /dev/null +++ b/Build/source/texk/one/ac/withenable.ac @@ -0,0 +1,4 @@ +## texk/one/ac/withenable.ac +## configure options and TL libraries required for one +dnl KPSE_WITH_PROG([one], [freetype2 gd], , [testing]) +KPSE_WITH_PROG([one], [freetype2 t1lib gd teckit graphite], [without], [testing]) diff --git a/Build/source/texk/one/aclocal.m4 b/Build/source/texk/one/aclocal.m4 new file mode 100644 index 00000000000..b7fa6ec471b --- /dev/null +++ b/Build/source/texk/one/aclocal.m4 @@ -0,0 +1,921 @@ +# generated automatically by aclocal 1.10.2 -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.63],, +[m4_warning([this file was generated for autoconf 2.63. +You have another version of autoconf. It may work, but is not guaranteed to. +If you have problems, you may need to regenerate the build system entirely. +To do so, use the procedure documented by the package, typically `autoreconf'.])]) + +# Copyright (C) 2002, 2003, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_AUTOMAKE_VERSION(VERSION) +# ---------------------------- +# Automake X.Y traces this macro to ensure aclocal.m4 has been +# generated from the m4 files accompanying Automake X.Y. +# (This private macro should not be called outside this file.) +AC_DEFUN([AM_AUTOMAKE_VERSION], +[am__api_version='1.10' +dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to +dnl require some minimum version. Point them to the right macro. +m4_if([$1], [1.10.2], [], + [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl +]) + +# _AM_AUTOCONF_VERSION(VERSION) +# ----------------------------- +# aclocal traces this macro to find the Autoconf version. +# This is a private macro too. Using m4_define simplifies +# the logic in aclocal, which can simply ignore this definition. +m4_define([_AM_AUTOCONF_VERSION], []) + +# AM_SET_CURRENT_AUTOMAKE_VERSION +# ------------------------------- +# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced. +# This function is AC_REQUIREd by AM_INIT_AUTOMAKE. +AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], +[AM_AUTOMAKE_VERSION([1.10.2])dnl +m4_ifndef([AC_AUTOCONF_VERSION], + [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl +_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))]) + +# AM_AUX_DIR_EXPAND -*- Autoconf -*- + +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets +# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to +# `$srcdir', `$srcdir/..', or `$srcdir/../..'. +# +# Of course, Automake must honor this variable whenever it calls a +# tool from the auxiliary directory. The problem is that $srcdir (and +# therefore $ac_aux_dir as well) can be either absolute or relative, +# depending on how configure is run. This is pretty annoying, since +# it makes $ac_aux_dir quite unusable in subdirectories: in the top +# source directory, any form will work fine, but in subdirectories a +# relative path needs to be adjusted first. +# +# $ac_aux_dir/missing +# fails when called from a subdirectory if $ac_aux_dir is relative +# $top_srcdir/$ac_aux_dir/missing +# fails if $ac_aux_dir is absolute, +# fails when called from a subdirectory in a VPATH build with +# a relative $ac_aux_dir +# +# The reason of the latter failure is that $top_srcdir and $ac_aux_dir +# are both prefixed by $srcdir. In an in-source build this is usually +# harmless because $srcdir is `.', but things will broke when you +# start a VPATH build or use an absolute $srcdir. +# +# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, +# iff we strip the leading $srcdir from $ac_aux_dir. That would be: +# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` +# and then we would define $MISSING as +# MISSING="\${SHELL} $am_aux_dir/missing" +# This will work as long as MISSING is not called from configure, because +# unfortunately $(top_srcdir) has no meaning in configure. +# However there are other variables, like CC, which are often used in +# configure, and could therefore not use this "fixed" $ac_aux_dir. +# +# Another solution, used here, is to always expand $ac_aux_dir to an +# absolute PATH. The drawback is that using absolute paths prevent a +# configured tree to be moved without reconfiguration. + +AC_DEFUN([AM_AUX_DIR_EXPAND], +[dnl Rely on autoconf to set up CDPATH properly. +AC_PREREQ([2.50])dnl +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` +]) + +# AM_CONDITIONAL -*- Autoconf -*- + +# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005, 2006 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 8 + +# AM_CONDITIONAL(NAME, SHELL-CONDITION) +# ------------------------------------- +# Define a conditional. +AC_DEFUN([AM_CONDITIONAL], +[AC_PREREQ(2.52)dnl + ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], + [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl +AC_SUBST([$1_TRUE])dnl +AC_SUBST([$1_FALSE])dnl +_AM_SUBST_NOTMAKE([$1_TRUE])dnl +_AM_SUBST_NOTMAKE([$1_FALSE])dnl +if $2; then + $1_TRUE= + $1_FALSE='#' +else + $1_TRUE='#' + $1_FALSE= +fi +AC_CONFIG_COMMANDS_PRE( +[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then + AC_MSG_ERROR([[conditional "$1" was never defined. +Usually this means the macro was only invoked conditionally.]]) +fi])]) + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 9 + +# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be +# written in clear, in which case automake, when reading aclocal.m4, +# will think it sees a *use*, and therefore will trigger all it's +# C support machinery. Also note that it means that autoscan, seeing +# CC etc. in the Makefile, will ask for an AC_PROG_CC use... + + +# _AM_DEPENDENCIES(NAME) +# ---------------------- +# See how the compiler implements dependency checking. +# NAME is "CC", "CXX", "GCJ", or "OBJC". +# We try a few techniques and use that to set a single cache variable. +# +# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was +# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular +# dependency, and given that the user is not expected to run this macro, +# just rely on AC_PROG_CC. +AC_DEFUN([_AM_DEPENDENCIES], +[AC_REQUIRE([AM_SET_DEPDIR])dnl +AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl +AC_REQUIRE([AM_MAKE_INCLUDE])dnl +AC_REQUIRE([AM_DEP_TRACK])dnl + +ifelse([$1], CC, [depcc="$CC" am_compiler_list=], + [$1], CXX, [depcc="$CXX" am_compiler_list=], + [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], + [$1], UPC, [depcc="$UPC" am_compiler_list=], + [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], + [depcc="$$1" am_compiler_list=]) + +AC_CACHE_CHECK([dependency style of $depcc], + [am_cv_$1_dependencies_compiler_type], +[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_$1_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` + fi + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + case $depmode in + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + none) break ;; + esac + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. + if depmode=$depmode \ + source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_$1_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_$1_dependencies_compiler_type=none +fi +]) +AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) +AM_CONDITIONAL([am__fastdep$1], [ + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) +]) + + +# AM_SET_DEPDIR +# ------------- +# Choose a directory name for dependency files. +# This macro is AC_REQUIREd in _AM_DEPENDENCIES +AC_DEFUN([AM_SET_DEPDIR], +[AC_REQUIRE([AM_SET_LEADING_DOT])dnl +AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl +]) + + +# AM_DEP_TRACK +# ------------ +AC_DEFUN([AM_DEP_TRACK], +[AC_ARG_ENABLE(dependency-tracking, +[ --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors]) +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' +fi +AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) +AC_SUBST([AMDEPBACKSLASH])dnl +_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl +]) + +# Generate code to set up dependency tracking. -*- Autoconf -*- + +# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2008 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +#serial 4 + +# _AM_OUTPUT_DEPENDENCY_COMMANDS +# ------------------------------ +AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], +[# Autoconf 2.62 quotes --file arguments for eval, but not when files +# are listed without --file. Let's play safe and only enable the eval +# if we detect the quoting. +case $CONFIG_FILES in +*\'*) eval set x "$CONFIG_FILES" ;; +*) set x $CONFIG_FILES ;; +esac +shift +for mf +do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`AS_DIRNAME("$mf")` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`AS_DIRNAME(["$file"])` + AS_MKDIR_P([$dirpart/$fdir]) + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done +done +])# _AM_OUTPUT_DEPENDENCY_COMMANDS + + +# AM_OUTPUT_DEPENDENCY_COMMANDS +# ----------------------------- +# This macro should only be invoked once -- use via AC_REQUIRE. +# +# This code is only required when automatic dependency tracking +# is enabled. FIXME. This creates each `.P' file that we will +# need in order to bootstrap the dependency handling code. +AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], +[AC_CONFIG_COMMANDS([depfiles], + [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], + [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) +]) + +# Do all the work for Automake. -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, +# 2005, 2006, 2008 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 13 + +# This macro actually does too much. Some checks are only needed if +# your package does certain things. But this isn't really a big deal. + +# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) +# AM_INIT_AUTOMAKE([OPTIONS]) +# ----------------------------------------------- +# The call with PACKAGE and VERSION arguments is the old style +# call (pre autoconf-2.50), which is being phased out. PACKAGE +# and VERSION should now be passed to AC_INIT and removed from +# the call to AM_INIT_AUTOMAKE. +# We support both call styles for the transition. After +# the next Automake release, Autoconf can make the AC_INIT +# arguments mandatory, and then we can depend on a new Autoconf +# release and drop the old call support. +AC_DEFUN([AM_INIT_AUTOMAKE], +[AC_PREREQ([2.60])dnl +dnl Autoconf wants to disallow AM_ names. We explicitly allow +dnl the ones we care about. +m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl +AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl +AC_REQUIRE([AC_PROG_INSTALL])dnl +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi +AC_SUBST([CYGPATH_W]) + +# Define the identity of the package. +dnl Distinguish between old-style and new-style calls. +m4_ifval([$2], +[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl + AC_SUBST([PACKAGE], [$1])dnl + AC_SUBST([VERSION], [$2])], +[_AM_SET_OPTIONS([$1])dnl +dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT. +m4_if(m4_ifdef([AC_PACKAGE_NAME], 1)m4_ifdef([AC_PACKAGE_VERSION], 1), 11,, + [m4_fatal([AC_INIT should be called with package and version arguments])])dnl + AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl + AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl + +_AM_IF_OPTION([no-define],, +[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) + AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl + +# Some tools Automake needs. +AC_REQUIRE([AM_SANITY_CHECK])dnl +AC_REQUIRE([AC_ARG_PROGRAM])dnl +AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) +AM_MISSING_PROG(AUTOCONF, autoconf) +AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) +AM_MISSING_PROG(AUTOHEADER, autoheader) +AM_MISSING_PROG(MAKEINFO, makeinfo) +AM_PROG_INSTALL_SH +AM_PROG_INSTALL_STRIP +AC_REQUIRE([AM_PROG_MKDIR_P])dnl +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +AC_REQUIRE([AC_PROG_AWK])dnl +AC_REQUIRE([AC_PROG_MAKE_SET])dnl +AC_REQUIRE([AM_SET_LEADING_DOT])dnl +_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], + [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], + [_AM_PROG_TAR([v7])])]) +_AM_IF_OPTION([no-dependencies],, +[AC_PROVIDE_IFELSE([AC_PROG_CC], + [_AM_DEPENDENCIES(CC)], + [define([AC_PROG_CC], + defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_CXX], + [_AM_DEPENDENCIES(CXX)], + [define([AC_PROG_CXX], + defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl +AC_PROVIDE_IFELSE([AC_PROG_OBJC], + [_AM_DEPENDENCIES(OBJC)], + [define([AC_PROG_OBJC], + defn([AC_PROG_OBJC])[_AM_DEPENDENCIES(OBJC)])])dnl +]) +]) + + +# When config.status generates a header, we must update the stamp-h file. +# This file resides in the same directory as the config header +# that is generated. The stamp files are numbered to have different names. + +# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the +# loop where config.status creates the headers, so we can generate +# our stamp files there. +AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], +[# Compute $1's index in $config_headers. +_am_arg=$1 +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count]) + +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_SH +# ------------------ +# Define $install_sh. +AC_DEFUN([AM_PROG_INSTALL_SH], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} +AC_SUBST(install_sh)]) + +# Copyright (C) 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# Check whether the underlying file-system supports filenames +# with a leading dot. For instance MS-DOS doesn't. +AC_DEFUN([AM_SET_LEADING_DOT], +[rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null +AC_SUBST([am__leading_dot])]) + +# Add --enable-maintainer-mode option to configure. -*- Autoconf -*- +# From Jim Meyering + +# Copyright (C) 1996, 1998, 2000, 2001, 2002, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 4 + +AC_DEFUN([AM_MAINTAINER_MODE], +[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) + dnl maintainer-mode is disabled by default + AC_ARG_ENABLE(maintainer-mode, +[ --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer], + USE_MAINTAINER_MODE=$enableval, + USE_MAINTAINER_MODE=no) + AC_MSG_RESULT([$USE_MAINTAINER_MODE]) + AM_CONDITIONAL(MAINTAINER_MODE, [test $USE_MAINTAINER_MODE = yes]) + MAINT=$MAINTAINER_MODE_TRUE + AC_SUBST(MAINT)dnl +] +) + +AU_DEFUN([jm_MAINTAINER_MODE], [AM_MAINTAINER_MODE]) + +# Check to see how 'make' treats includes. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 3 + +# AM_MAKE_INCLUDE() +# ----------------- +# Check to see how make treats includes. +AC_DEFUN([AM_MAKE_INCLUDE], +[am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo done +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +AC_MSG_CHECKING([for style of include used by $am_make]) +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# We grep out `Entering directory' and `Leaving directory' +# messages which can occur if `w' ends up in MAKEFLAGS. +# In particular we don't look at `^make:' because GNU make might +# be invoked under some other name (usually "gmake"), in which +# case it prints its new name instead of `make'. +if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then + am__include=include + am__quote= + _am_result=GNU +fi +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then + am__include=.include + am__quote="\"" + _am_result=BSD + fi +fi +AC_SUBST([am__include]) +AC_SUBST([am__quote]) +AC_MSG_RESULT([$_am_result]) +rm -f confinc confmf +]) + +# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- + +# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2004, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 5 + +# AM_MISSING_PROG(NAME, PROGRAM) +# ------------------------------ +AC_DEFUN([AM_MISSING_PROG], +[AC_REQUIRE([AM_MISSING_HAS_RUN]) +$1=${$1-"${am_missing_run}$2"} +AC_SUBST($1)]) + + +# AM_MISSING_HAS_RUN +# ------------------ +# Define MISSING if not defined so far and test if it supports --run. +# If it does, set am_missing_run to use it, otherwise, to nothing. +AC_DEFUN([AM_MISSING_HAS_RUN], +[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl +AC_REQUIRE_AUX_FILE([missing])dnl +test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + AC_MSG_WARN([`missing' script is too old or missing]) +fi +]) + +# Copyright (C) 2003, 2004, 2005, 2006 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_MKDIR_P +# --------------- +# Check for `mkdir -p'. +AC_DEFUN([AM_PROG_MKDIR_P], +[AC_PREREQ([2.60])dnl +AC_REQUIRE([AC_PROG_MKDIR_P])dnl +dnl Automake 1.8 to 1.9.6 used to define mkdir_p. We now use MKDIR_P, +dnl while keeping a definition of mkdir_p for backward compatibility. +dnl @MKDIR_P@ is magic: AC_OUTPUT adjusts its value for each Makefile. +dnl However we cannot define mkdir_p as $(MKDIR_P) for the sake of +dnl Makefile.ins that do not define MKDIR_P, so we do our own +dnl adjustment using top_builddir (which is defined more often than +dnl MKDIR_P). +AC_SUBST([mkdir_p], ["$MKDIR_P"])dnl +case $mkdir_p in + [[\\/$]]* | ?:[[\\/]]*) ;; + */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +esac +]) + +# Helper functions for option handling. -*- Autoconf -*- + +# Copyright (C) 2001, 2002, 2003, 2005, 2008 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 4 + +# _AM_MANGLE_OPTION(NAME) +# ----------------------- +AC_DEFUN([_AM_MANGLE_OPTION], +[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) + +# _AM_SET_OPTION(NAME) +# ------------------------------ +# Set option NAME. Presently that only means defining a flag for this option. +AC_DEFUN([_AM_SET_OPTION], +[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) + +# _AM_SET_OPTIONS(OPTIONS) +# ---------------------------------- +# OPTIONS is a space-separated list of Automake options. +AC_DEFUN([_AM_SET_OPTIONS], +[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) + +# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) +# ------------------------------------------- +# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. +AC_DEFUN([_AM_IF_OPTION], +[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) + +# Check to make sure that the build environment is sane. -*- Autoconf -*- + +# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 +# Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 4 + +# AM_SANITY_CHECK +# --------------- +AC_DEFUN([AM_SANITY_CHECK], +[AC_MSG_CHECKING([whether build environment is sane]) +# Just in case +sleep 1 +echo timestamp > conftest.file +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + if test "$[*]" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftest.file` + fi + rm -f conftest.file + if test "$[*]" != "X $srcdir/configure conftest.file" \ + && test "$[*]" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken +alias in your environment]) + fi + + test "$[2]" = conftest.file + ) +then + # Ok. + : +else + AC_MSG_ERROR([newly created file is older than distributed files! +Check your system clock]) +fi +AC_MSG_RESULT(yes)]) + +# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# AM_PROG_INSTALL_STRIP +# --------------------- +# One issue with vendor `install' (even GNU) is that you can't +# specify the program used to strip binaries. This is especially +# annoying in cross-compiling environments, where the build's strip +# is unlikely to handle the host's binaries. +# Fortunately install-sh will honor a STRIPPROG variable, so we +# always use install-sh in `make install-strip', and initialize +# STRIPPROG with the value of the STRIP variable (set by the user). +AC_DEFUN([AM_PROG_INSTALL_STRIP], +[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +dnl Don't test for $cross_compiling = yes, because it might be `maybe'. +if test "$cross_compiling" != no; then + AC_CHECK_TOOL([STRIP], [strip], :) +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" +AC_SUBST([INSTALL_STRIP_PROGRAM])]) + +# Copyright (C) 2006 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# _AM_SUBST_NOTMAKE(VARIABLE) +# --------------------------- +# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in. +# This macro is traced by Automake. +AC_DEFUN([_AM_SUBST_NOTMAKE]) + +# Check how to create a tarball. -*- Autoconf -*- + +# Copyright (C) 2004, 2005 Free Software Foundation, Inc. +# +# This file is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# serial 2 + +# _AM_PROG_TAR(FORMAT) +# -------------------- +# Check how to create a tarball in format FORMAT. +# FORMAT should be one of `v7', `ustar', or `pax'. +# +# Substitute a variable $(am__tar) that is a command +# writing to stdout a FORMAT-tarball containing the directory +# $tardir. +# tardir=directory && $(am__tar) > result.tar +# +# Substitute a variable $(am__untar) that extract such +# a tarball read from stdin. +# $(am__untar) < result.tar +AC_DEFUN([_AM_PROG_TAR], +[# Always define AMTAR for backward compatibility. +AM_MISSING_PROG([AMTAR], [tar]) +m4_if([$1], [v7], + [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], + [m4_case([$1], [ustar],, [pax],, + [m4_fatal([Unknown tar format])]) +AC_MSG_CHECKING([how to create a $1 tar archive]) +# Loop over all known methods to create a tar archive until one works. +_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' +_am_tools=${am_cv_prog_tar_$1-$_am_tools} +# Do not fold the above two line into one, because Tru64 sh and +# Solaris sh will not grok spaces in the rhs of `-'. +for _am_tool in $_am_tools +do + case $_am_tool in + gnutar) + for _am_tar in tar gnutar gtar; + do + AM_RUN_LOG([$_am_tar --version]) && break + done + am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' + am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' + am__untar="$_am_tar -xf -" + ;; + plaintar) + # Must skip GNU tar: if it does not support --format= it doesn't create + # ustar tarball either. + (tar --version) >/dev/null 2>&1 && continue + am__tar='tar chf - "$$tardir"' + am__tar_='tar chf - "$tardir"' + am__untar='tar xf -' + ;; + pax) + am__tar='pax -L -x $1 -w "$$tardir"' + am__tar_='pax -L -x $1 -w "$tardir"' + am__untar='pax -r' + ;; + cpio) + am__tar='find "$$tardir" -print | cpio -o -H $1 -L' + am__tar_='find "$tardir" -print | cpio -o -H $1 -L' + am__untar='cpio -i -H $1 -d' + ;; + none) + am__tar=false + am__tar_=false + am__untar=false + ;; + esac + + # If the value was cached, stop now. We just wanted to have am__tar + # and am__untar set. + test -n "${am_cv_prog_tar_$1}" && break + + # tar/untar a dummy directory, and stop if the command works + rm -rf conftest.dir + mkdir conftest.dir + echo GrepMe > conftest.dir/file + AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) + rm -rf conftest.dir + if test -s conftest.tar; then + AM_RUN_LOG([$am__untar <conftest.tar]) + grep GrepMe conftest.dir/file >/dev/null 2>&1 && break + fi +done +rm -rf conftest.dir + +AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) +AC_MSG_RESULT([$am_cv_prog_tar_$1])]) +AC_SUBST([am__tar]) +AC_SUBST([am__untar]) +]) # _AM_PROG_TAR + +m4_include([../../m4/kpse-common.m4]) +m4_include([../../m4/kpse-freetype2-flags.m4]) +m4_include([../../m4/kpse-gd-flags.m4]) +m4_include([../../m4/kpse-graphite-flags.m4]) +m4_include([../../m4/kpse-libpng-flags.m4]) +m4_include([../../m4/kpse-obsdcompat-flags.m4]) +m4_include([../../m4/kpse-t1lib-flags.m4]) +m4_include([../../m4/kpse-teckit-flags.m4]) +m4_include([../../m4/kpse-xpdf-flags.m4]) +m4_include([../../m4/kpse-zlib-flags.m4]) +m4_include([../../m4/libtool.m4]) +m4_include([../../m4/ltoptions.m4]) +m4_include([../../m4/ltsugar.m4]) +m4_include([../../m4/ltversion.m4]) +m4_include([../../m4/lt~obsolete.m4]) diff --git a/Build/source/texk/one/config.h.in b/Build/source/texk/one/config.h.in new file mode 100644 index 00000000000..bcc3ed319e5 --- /dev/null +++ b/Build/source/texk/one/config.h.in @@ -0,0 +1,59 @@ +/* config.h.in. Generated from configure.ac by autoheader. */ + +/* Define to 1 if you have the <dlfcn.h> header file. */ +#undef HAVE_DLFCN_H + +/* Define to 1 if you have the <inttypes.h> header file. */ +#undef HAVE_INTTYPES_H + +/* Define to 1 if you have the <memory.h> header file. */ +#undef HAVE_MEMORY_H + +/* Define to 1 if you have the <stdint.h> header file. */ +#undef HAVE_STDINT_H + +/* Define to 1 if you have the <stdlib.h> header file. */ +#undef HAVE_STDLIB_H + +/* Define to 1 if you have the <strings.h> header file. */ +#undef HAVE_STRINGS_H + +/* Define to 1 if you have the <string.h> header file. */ +#undef HAVE_STRING_H + +/* Define to 1 if you have the <sys/stat.h> header file. */ +#undef HAVE_SYS_STAT_H + +/* Define to 1 if you have the <sys/types.h> header file. */ +#undef HAVE_SYS_TYPES_H + +/* Define to 1 if you have the <unistd.h> header file. */ +#undef HAVE_UNISTD_H + +/* Define to the sub-directory in which libtool stores uninstalled libraries. + */ +#undef LT_OBJDIR + +/* Name of package */ +#undef PACKAGE + +/* Define to the address where bug reports for this package should be sent. */ +#undef PACKAGE_BUGREPORT + +/* Define to the full name of this package. */ +#undef PACKAGE_NAME + +/* Define to the full name and version of this package. */ +#undef PACKAGE_STRING + +/* Define to the one symbol short name of this package. */ +#undef PACKAGE_TARNAME + +/* Define to the version of this package. */ +#undef PACKAGE_VERSION + +/* Define to 1 if you have the ANSI C header files. */ +#undef STDC_HEADERS + +/* Version number of package */ +#undef VERSION diff --git a/Build/source/texk/one/configure b/Build/source/texk/one/configure new file mode 100755 index 00000000000..57757c6ca4f --- /dev/null +++ b/Build/source/texk/one/configure @@ -0,0 +1,13781 @@ +#! /bin/sh +# Guess values for system-dependent variables and create Makefiles. +# Generated by GNU Autoconf 2.63 for bld-test-texk-one 1.1. +# +# Report bugs to <peb@mppmu.mpg.de>. +# +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +# 2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# This configure script is free software; the Free Software Foundation +# gives unlimited permission to copy, distribute and modify it. +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + + + +# PATH needs CR +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + { (exit 1); exit 1; } +fi + +# Work around bugs in pre-3.0 UWIN ksh. +for as_var in ENV MAIL MAILPATH +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# CDPATH. +$as_unset CDPATH + + +if test "x$CONFIG_SHELL" = x; then + if (eval ":") 2>/dev/null; then + as_have_required=yes +else + as_have_required=no +fi + + if test $as_have_required = yes && (eval ": +(as_func_return () { + (exit \$1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test \$exitcode = 0) || { (exit 1); exit 1; } + +( + as_lineno_1=\$LINENO + as_lineno_2=\$LINENO + test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && + test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } +") 2> /dev/null; then + : +else + as_candidate_shells= + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + case $as_dir in + /*) + for as_base in sh bash ksh sh5; do + as_candidate_shells="$as_candidate_shells $as_dir/$as_base" + done;; + esac +done +IFS=$as_save_IFS + + + for as_shell in $as_candidate_shells $SHELL; do + # Try only shells that exist, to save several forks. + if { test -f "$as_shell" || test -f "$as_shell.exe"; } && + { ("$as_shell") 2> /dev/null <<\_ASEOF +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + +: +_ASEOF +}; then + CONFIG_SHELL=$as_shell + as_have_required=yes + if { "$as_shell" 2> /dev/null <<\_ASEOF +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + +: +(as_func_return () { + (exit $1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = "$1" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test $exitcode = 0) || { (exit 1); exit 1; } + +( + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } + +_ASEOF +}; then + break +fi + +fi + + done + + if test "x$CONFIG_SHELL" != x; then + for as_var in BASH_ENV ENV + do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + done + export CONFIG_SHELL + exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} +fi + + + if test $as_have_required = no; then + echo This script requires a shell more modern than all the + echo shells that I found on your system. Please install a + echo modern shell, or manually run the script under such a + echo shell if you do have one. + { (exit 1); exit 1; } +fi + + +fi + +fi + + + +(eval "as_func_return () { + (exit \$1) +} +as_func_success () { + as_func_return 0 +} +as_func_failure () { + as_func_return 1 +} +as_func_ret_success () { + return 0 +} +as_func_ret_failure () { + return 1 +} + +exitcode=0 +if as_func_success; then + : +else + exitcode=1 + echo as_func_success failed. +fi + +if as_func_failure; then + exitcode=1 + echo as_func_failure succeeded. +fi + +if as_func_ret_success; then + : +else + exitcode=1 + echo as_func_ret_success failed. +fi + +if as_func_ret_failure; then + exitcode=1 + echo as_func_ret_failure succeeded. +fi + +if ( set x; as_func_ret_success y && test x = \"\$1\" ); then + : +else + exitcode=1 + echo positional parameters were not saved. +fi + +test \$exitcode = 0") || { + echo No shell found that supports shell functions. + echo Please tell bug-autoconf@gnu.org about your system, + echo including any error possibly output before this message. + echo This can help us improve future autoconf versions. + echo Configuration will now proceed without shell functions. +} + + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line after each line using $LINENO; the second 'sed' + # does the real work. The second script uses 'N' to pair each + # line-number line with the line containing $LINENO, and appends + # trailing '-' during substitution so that $LINENO is not a special + # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # scripts with optimization help from Paolo Bonzini. Blame Lee + # E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in +-n*) + case `echo 'x\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + *) ECHO_C='\c';; + esac;; +*) + ECHO_N='-n';; +esac +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' +else + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +fi +as_executable_p=$as_test_x + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + + + +# Check that we are running under the correct shell. +SHELL=${CONFIG_SHELL-/bin/sh} + +case X$lt_ECHO in +X*--fallback-echo) + # Remove one level of quotation (which was required for Make). + ECHO=`echo "$lt_ECHO" | sed 's,\\\\\$\\$0,'$0','` + ;; +esac + +ECHO=${lt_ECHO-echo} +if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' ; then + # Yippee, $ECHO works! + : +else + # Restart under the correct shell. + exec $SHELL "$0" --no-reexec ${1+"$@"} +fi + +if test "X$1" = X--fallback-echo; then + # used as fallback echo + shift + cat <<_LT_EOF +$* +_LT_EOF + exit 0 +fi + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +if test -z "$lt_ECHO"; then + if test "X${echo_test_string+set}" != Xset; then + # find a string as large as possible, as long as the shell can cope with it + for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do + # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... + if { echo_test_string=`eval $cmd`; } 2>/dev/null && + { test "X$echo_test_string" = "X$echo_test_string"; } 2>/dev/null + then + break + fi + done + fi + + if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && + echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : + else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do + IFS="$lt_save_ifs" + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + ECHO="$dir/echo" + break + fi + done + IFS="$lt_save_ifs" + + if test "X$ECHO" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`{ print -r '\t'; } 2>/dev/null`" = 'X\t' && + echo_testing_string=`{ print -r "$echo_test_string"; } 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + ECHO='print -r' + elif { test -f /bin/ksh || test -f /bin/ksh$ac_exeext; } && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running configure again with it. + ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec $CONFIG_SHELL "$0" --no-reexec ${1+"$@"} + else + # Try using printf. + ECHO='printf %s\n' + if test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t' && + echo_testing_string=`{ $ECHO "$echo_test_string"; } 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # Cool, printf works + : + elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($ORIGINAL_CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + ECHO="$CONFIG_SHELL $0 --fallback-echo" + elif echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($CONFIG_SHELL "$0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + ECHO="$CONFIG_SHELL $0 --fallback-echo" + else + # maybe with a smaller string... + prev=: + + for cmd in 'echo test' 'sed 2q "$0"' 'sed 10q "$0"' 'sed 20q "$0"' 'sed 50q "$0"'; do + if { test "X$echo_test_string" = "X`eval $cmd`"; } 2>/dev/null + then + break + fi + prev="$cmd" + done + + if test "$prev" != 'sed 50q "$0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "$0" ${1+"$@"} + else + # Oops. We lost completely, so just stick with echo. + ECHO=echo + fi + fi + fi + fi + fi +fi + +# Copy echo and quote the copy suitably for passing to libtool from +# the Makefile, instead of quoting the original, which is used later. +lt_ECHO=$ECHO +if test "X$lt_ECHO" = "X$CONFIG_SHELL $0 --fallback-echo"; then + lt_ECHO="$CONFIG_SHELL \\\$\$0 --fallback-echo" +fi + + + + +exec 7<&0 </dev/null 6>&1 + +# Name of the host. +# hostname on some systems (SVR3.2, Linux) returns a bogus exit status, +# so uname gets run too. +ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +# +# Initializations. +# +ac_default_prefix=/usr/local +ac_clean_files= +ac_config_libobj_dir=. +LIBOBJS= +cross_compiling=no +subdirs= +MFLAGS= +MAKEFLAGS= +SHELL=${CONFIG_SHELL-/bin/sh} + +# Identity of this package. +PACKAGE_NAME='bld-test-texk-one' +PACKAGE_TARNAME='bld-test-texk-one' +PACKAGE_VERSION='1.1' +PACKAGE_STRING='bld-test-texk-one 1.1' +PACKAGE_BUGREPORT='peb@mppmu.mpg.de' + +ac_unique_file="one.c" +# Factoring default headers for most tests. +ac_includes_default="\ +#include <stdio.h> +#ifdef HAVE_SYS_TYPES_H +# include <sys/types.h> +#endif +#ifdef HAVE_SYS_STAT_H +# include <sys/stat.h> +#endif +#ifdef STDC_HEADERS +# include <stdlib.h> +# include <stddef.h> +#else +# ifdef HAVE_STDLIB_H +# include <stdlib.h> +# endif +#endif +#ifdef HAVE_STRING_H +# if !defined STDC_HEADERS && defined HAVE_MEMORY_H +# include <memory.h> +# endif +# include <string.h> +#endif +#ifdef HAVE_STRINGS_H +# include <strings.h> +#endif +#ifdef HAVE_INTTYPES_H +# include <inttypes.h> +#endif +#ifdef HAVE_STDINT_H +# include <stdint.h> +#endif +#ifdef HAVE_UNISTD_H +# include <unistd.h> +#endif" + +ac_subst_vars='LTLIBOBJS +LIBOBJS +TECKIT_RULE +TECKIT_DEPEND +TECKIT_LIBS +TECKIT_INCLUDES +GRAPHITE_RULE +GRAPHITE_DEPEND +GRAPHITE_LIBS +GRAPHITE_INCLUDES +XPDF_RULE +XPDF_DEPEND +XPDF_LIBS +XPDF_INCLUDES +GD_RULE +GD_DEPEND +GD_LIBS +GD_INCLUDES +FREETYPE2_RULE +FREETYPE2_DEPEND +FREETYPE2_LIBS +FREETYPE2_INCLUDES +T1LIB_RULE +T1LIB_DEPEND +T1LIB_LIBS +T1LIB_INCLUDES +LIBPNG_RULE +LIBPNG_DEPEND +LIBPNG_LIBS +LIBPNG_INCLUDES +OBSDCOMPAT_RULE +OBSDCOMPAT_DEPEND +OBSDCOMPAT_LIBS +OBSDCOMPAT_INCLUDES +ZLIB_RULE +ZLIB_DEPEND +ZLIB_LIBS +ZLIB_INCLUDES +CPP +OTOOL64 +OTOOL +LIPO +NMEDIT +DSYMUTIL +lt_ECHO +RANLIB +AR +OBJDUMP +LN_S +NM +ac_ct_DUMPBIN +DUMPBIN +LD +FGREP +EGREP +GREP +SED +am__fastdepCC_FALSE +am__fastdepCC_TRUE +CCDEPMODE +AMDEPBACKSLASH +AMDEP_FALSE +AMDEP_TRUE +am__quote +am__include +DEPDIR +OBJEXT +EXEEXT +ac_ct_CC +CPPFLAGS +LDFLAGS +CFLAGS +CC +host_os +host_vendor +host_cpu +host +build_os +build_vendor +build_cpu +build +LIBTOOL +MAINT +MAINTAINER_MODE_FALSE +MAINTAINER_MODE_TRUE +am__untar +am__tar +AMTAR +am__leading_dot +SET_MAKE +AWK +mkdir_p +MKDIR_P +INSTALL_STRIP_PROGRAM +STRIP +install_sh +MAKEINFO +AUTOHEADER +AUTOMAKE +AUTOCONF +ACLOCAL +VERSION +PACKAGE +CYGPATH_W +am__isrc +INSTALL_DATA +INSTALL_SCRIPT +INSTALL_PROGRAM +target_alias +host_alias +build_alias +LIBS +ECHO_T +ECHO_N +ECHO_C +DEFS +mandir +localedir +libdir +psdir +pdfdir +dvidir +htmldir +infodir +docdir +oldincludedir +includedir +localstatedir +sharedstatedir +sysconfdir +datadir +datarootdir +libexecdir +sbindir +bindir +program_transform_name +prefix +exec_prefix +PACKAGE_BUGREPORT +PACKAGE_STRING +PACKAGE_VERSION +PACKAGE_TARNAME +PACKAGE_NAME +PATH_SEPARATOR +SHELL' +ac_subst_files='' +ac_user_opts=' +enable_option_checking +enable_maintainer_mode +enable_shared +enable_static +with_pic +enable_fast_install +enable_dependency_tracking +with_gnu_ld +enable_libtool_lock +with_system_zlib +with_zlib_includes +with_zlib_libdir +with_system_libpng +with_libpng_includes +with_libpng_libdir +with_system_t1lib +with_t1lib_includes +with_t1lib_libdir +with_system_freetype2 +with_freetype2_includes +with_freetype2_libdir +with_system_gd +with_gd_includes +with_gd_libdir +with_system_graphite +with_graphite_includes +with_graphite_libdir +with_system_teckit +with_teckit_includes +with_teckit_libdir +' + ac_precious_vars='build_alias +host_alias +target_alias +CC +CFLAGS +LDFLAGS +LIBS +CPPFLAGS +CPP' + + +# Initialize some variables set by options. +ac_init_help= +ac_init_version=false +ac_unrecognized_opts= +ac_unrecognized_sep= +# The variables have the same names as the options, with +# dashes changed to underlines. +cache_file=/dev/null +exec_prefix=NONE +no_create= +no_recursion= +prefix=NONE +program_prefix=NONE +program_suffix=NONE +program_transform_name=s,x,x, +silent= +site= +srcdir= +verbose= +x_includes=NONE +x_libraries=NONE + +# Installation directory options. +# These are left unexpanded so users can "make install exec_prefix=/foo" +# and all the variables that are supposed to be based on exec_prefix +# by default will actually change. +# Use braces instead of parens because sh, perl, etc. also accept them. +# (The list follows the same order as the GNU Coding Standards.) +bindir='${exec_prefix}/bin' +sbindir='${exec_prefix}/sbin' +libexecdir='${exec_prefix}/libexec' +datarootdir='${prefix}/share' +datadir='${datarootdir}' +sysconfdir='${prefix}/etc' +sharedstatedir='${prefix}/com' +localstatedir='${prefix}/var' +includedir='${prefix}/include' +oldincludedir='/usr/include' +docdir='${datarootdir}/doc/${PACKAGE_TARNAME}' +infodir='${datarootdir}/info' +htmldir='${docdir}' +dvidir='${docdir}' +pdfdir='${docdir}' +psdir='${docdir}' +libdir='${exec_prefix}/lib' +localedir='${datarootdir}/locale' +mandir='${datarootdir}/man' + +ac_prev= +ac_dashdash= +for ac_option +do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then + eval $ac_prev=\$ac_option + ac_prev= + continue + fi + + case $ac_option in + *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; + *) ac_optarg=yes ;; + esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + + case $ac_dashdash$ac_option in + --) + ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; + -bindir=* | --bindir=* | --bindi=* | --bind=* | --bin=* | --bi=*) + bindir=$ac_optarg ;; + + -build | --build | --buil | --bui | --bu) + ac_prev=build_alias ;; + -build=* | --build=* | --buil=* | --bui=* | --bu=*) + build_alias=$ac_optarg ;; + + -cache-file | --cache-file | --cache-fil | --cache-fi \ + | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c) + ac_prev=cache_file ;; + -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \ + | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*) + cache_file=$ac_optarg ;; + + --config-cache | -C) + cache_file=config.cache ;; + + -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; + -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + + -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ + | --dataroo | --dataro | --datar) + ac_prev=datarootdir ;; + -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ + | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) + datarootdir=$ac_optarg ;; + + -disable-* | --disable-*) + ac_useropt=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 + { (exit 1); exit 1; }; } + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--disable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=no ;; + + -docdir | --docdir | --docdi | --doc | --do) + ac_prev=docdir ;; + -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) + docdir=$ac_optarg ;; + + -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) + ac_prev=dvidir ;; + -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) + dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_useropt=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + { $as_echo "$as_me: error: invalid feature name: $ac_useropt" >&2 + { (exit 1); exit 1; }; } + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"enable_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--enable-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval enable_$ac_useropt=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ + | --exec | --exe | --ex) + ac_prev=exec_prefix ;; + -exec-prefix=* | --exec_prefix=* | --exec-prefix=* | --exec-prefi=* \ + | --exec-pref=* | --exec-pre=* | --exec-pr=* | --exec-p=* | --exec-=* \ + | --exec=* | --exe=* | --ex=*) + exec_prefix=$ac_optarg ;; + + -gas | --gas | --ga | --g) + # Obsolete; use --with-gas. + with_gas=yes ;; + + -help | --help | --hel | --he | -h) + ac_init_help=long ;; + -help=r* | --help=r* | --hel=r* | --he=r* | -hr*) + ac_init_help=recursive ;; + -help=s* | --help=s* | --hel=s* | --he=s* | -hs*) + ac_init_help=short ;; + + -host | --host | --hos | --ho) + ac_prev=host_alias ;; + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + + -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) + ac_prev=htmldir ;; + -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ + | --ht=*) + htmldir=$ac_optarg ;; + + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; + -includedir=* | --includedir=* | --includedi=* | --included=* | --include=* \ + | --includ=* | --inclu=* | --incl=* | --inc=*) + includedir=$ac_optarg ;; + + -infodir | --infodir | --infodi | --infod | --info | --inf) + ac_prev=infodir ;; + -infodir=* | --infodir=* | --infodi=* | --infod=* | --info=* | --inf=*) + infodir=$ac_optarg ;; + + -libdir | --libdir | --libdi | --libd) + ac_prev=libdir ;; + -libdir=* | --libdir=* | --libdi=* | --libd=*) + libdir=$ac_optarg ;; + + -libexecdir | --libexecdir | --libexecdi | --libexecd | --libexec \ + | --libexe | --libex | --libe) + ac_prev=libexecdir ;; + -libexecdir=* | --libexecdir=* | --libexecdi=* | --libexecd=* | --libexec=* \ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + + -localedir | --localedir | --localedi | --localed | --locale) + ac_prev=localedir ;; + -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) + localedir=$ac_optarg ;; + + -localstatedir | --localstatedir | --localstatedi | --localstated \ + | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ + | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) + ac_prev=mandir ;; + -mandir=* | --mandir=* | --mandi=* | --mand=* | --man=* | --ma=* | --m=*) + mandir=$ac_optarg ;; + + -nfp | --nfp | --nf) + # Obsolete; use --without-fp. + with_fp=no ;; + + -no-create | --no-create | --no-creat | --no-crea | --no-cre \ + | --no-cr | --no-c | -n) + no_create=yes ;; + + -no-recursion | --no-recursion | --no-recursio | --no-recursi \ + | --no-recurs | --no-recur | --no-recu | --no-rec | --no-re | --no-r) + no_recursion=yes ;; + + -oldincludedir | --oldincludedir | --oldincludedi | --oldincluded \ + | --oldinclude | --oldinclud | --oldinclu | --oldincl | --oldinc \ + | --oldin | --oldi | --old | --ol | --o) + ac_prev=oldincludedir ;; + -oldincludedir=* | --oldincludedir=* | --oldincludedi=* | --oldincluded=* \ + | --oldinclude=* | --oldinclud=* | --oldinclu=* | --oldincl=* | --oldinc=* \ + | --oldin=* | --oldi=* | --old=* | --ol=* | --o=*) + oldincludedir=$ac_optarg ;; + + -prefix | --prefix | --prefi | --pref | --pre | --pr | --p) + ac_prev=prefix ;; + -prefix=* | --prefix=* | --prefi=* | --pref=* | --pre=* | --pr=* | --p=*) + prefix=$ac_optarg ;; + + -program-prefix | --program-prefix | --program-prefi | --program-pref \ + | --program-pre | --program-pr | --program-p) + ac_prev=program_prefix ;; + -program-prefix=* | --program-prefix=* | --program-prefi=* \ + | --program-pref=* | --program-pre=* | --program-pr=* | --program-p=*) + program_prefix=$ac_optarg ;; + + -program-suffix | --program-suffix | --program-suffi | --program-suff \ + | --program-suf | --program-su | --program-s) + ac_prev=program_suffix ;; + -program-suffix=* | --program-suffix=* | --program-suffi=* \ + | --program-suff=* | --program-suf=* | --program-su=* | --program-s=*) + program_suffix=$ac_optarg ;; + + -program-transform-name | --program-transform-name \ + | --program-transform-nam | --program-transform-na \ + | --program-transform-n | --program-transform- \ + | --program-transform | --program-transfor \ + | --program-transfo | --program-transf \ + | --program-trans | --program-tran \ + | --progr-tra | --program-tr | --program-t) + ac_prev=program_transform_name ;; + -program-transform-name=* | --program-transform-name=* \ + | --program-transform-nam=* | --program-transform-na=* \ + | --program-transform-n=* | --program-transform-=* \ + | --program-transform=* | --program-transfor=* \ + | --program-transfo=* | --program-transf=* \ + | --program-trans=* | --program-tran=* \ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + + -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) + ac_prev=pdfdir ;; + -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) + pdfdir=$ac_optarg ;; + + -psdir | --psdir | --psdi | --psd | --ps) + ac_prev=psdir ;; + -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) + psdir=$ac_optarg ;; + + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; + + -sbindir | --sbindir | --sbindi | --sbind | --sbin | --sbi | --sb) + ac_prev=sbindir ;; + -sbindir=* | --sbindir=* | --sbindi=* | --sbind=* | --sbin=* \ + | --sbi=* | --sb=*) + sbindir=$ac_optarg ;; + + -sharedstatedir | --sharedstatedir | --sharedstatedi \ + | --sharedstated | --sharedstate | --sharedstat | --sharedsta \ + | --sharedst | --shareds | --shared | --share | --shar \ + | --sha | --sh) + ac_prev=sharedstatedir ;; + -sharedstatedir=* | --sharedstatedir=* | --sharedstatedi=* \ + | --sharedstated=* | --sharedstate=* | --sharedstat=* | --sharedsta=* \ + | --sharedst=* | --shareds=* | --shared=* | --share=* | --shar=* \ + | --sha=* | --sh=*) + sharedstatedir=$ac_optarg ;; + + -site | --site | --sit) + ac_prev=site ;; + -site=* | --site=* | --sit=*) + site=$ac_optarg ;; + + -srcdir | --srcdir | --srcdi | --srcd | --src | --sr) + ac_prev=srcdir ;; + -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*) + srcdir=$ac_optarg ;; + + -sysconfdir | --sysconfdir | --sysconfdi | --sysconfd | --sysconf \ + | --syscon | --sysco | --sysc | --sys | --sy) + ac_prev=sysconfdir ;; + -sysconfdir=* | --sysconfdir=* | --sysconfdi=* | --sysconfd=* | --sysconf=* \ + | --syscon=* | --sysco=* | --sysc=* | --sys=* | --sy=*) + sysconfdir=$ac_optarg ;; + + -target | --target | --targe | --targ | --tar | --ta | --t) + ac_prev=target_alias ;; + -target=* | --target=* | --targe=* | --targ=* | --tar=* | --ta=* | --t=*) + target_alias=$ac_optarg ;; + + -v | -verbose | --verbose | --verbos | --verbo | --verb) + verbose=yes ;; + + -version | --version | --versio | --versi | --vers | -V) + ac_init_version=: ;; + + -with-* | --with-*) + ac_useropt=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 + { (exit 1); exit 1; }; } + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--with-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=\$ac_optarg ;; + + -without-* | --without-*) + ac_useropt=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. + expr "x$ac_useropt" : ".*[^-+._$as_cr_alnum]" >/dev/null && + { $as_echo "$as_me: error: invalid package name: $ac_useropt" >&2 + { (exit 1); exit 1; }; } + ac_useropt_orig=$ac_useropt + ac_useropt=`$as_echo "$ac_useropt" | sed 's/[-+.]/_/g'` + case $ac_user_opts in + *" +"with_$ac_useropt" +"*) ;; + *) ac_unrecognized_opts="$ac_unrecognized_opts$ac_unrecognized_sep--without-$ac_useropt_orig" + ac_unrecognized_sep=', ';; + esac + eval with_$ac_useropt=no ;; + + --x) + # Obsolete; use --with-x. + with_x=yes ;; + + -x-includes | --x-includes | --x-include | --x-includ | --x-inclu \ + | --x-incl | --x-inc | --x-in | --x-i) + ac_prev=x_includes ;; + -x-includes=* | --x-includes=* | --x-include=* | --x-includ=* | --x-inclu=* \ + | --x-incl=* | --x-inc=* | --x-in=* | --x-i=*) + x_includes=$ac_optarg ;; + + -x-libraries | --x-libraries | --x-librarie | --x-librari \ + | --x-librar | --x-libra | --x-libr | --x-lib | --x-li | --x-l) + ac_prev=x_libraries ;; + -x-libraries=* | --x-libraries=* | --x-librarie=* | --x-librari=* \ + | --x-librar=* | --x-libra=* | --x-libr=* | --x-lib=* | --x-li=* | --x-l=*) + x_libraries=$ac_optarg ;; + + -*) { $as_echo "$as_me: error: unrecognized option: $ac_option +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } + ;; + + *=*) + ac_envvar=`expr "x$ac_option" : 'x\([^=]*\)='` + # Reject names that are not valid shell variable names. + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { $as_echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } + eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) + # FIXME: should be removed in autoconf 3.0. + $as_echo "$as_me: WARNING: you should use --build, --host, --target" >&2 + expr "x$ac_option" : ".*[^-._$as_cr_alnum]" >/dev/null && + $as_echo "$as_me: WARNING: invalid host type: $ac_option" >&2 + : ${build_alias=$ac_option} ${host_alias=$ac_option} ${target_alias=$ac_option} + ;; + + esac +done + +if test -n "$ac_prev"; then + ac_option=--`echo $ac_prev | sed 's/_/-/g'` + { $as_echo "$as_me: error: missing argument to $ac_option" >&2 + { (exit 1); exit 1; }; } +fi + +if test -n "$ac_unrecognized_opts"; then + case $enable_option_checking in + no) ;; + fatal) { $as_echo "$as_me: error: unrecognized options: $ac_unrecognized_opts" >&2 + { (exit 1); exit 1; }; } ;; + *) $as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2 ;; + esac +fi + +# Check all directory arguments for consistency. +for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ + datadir sysconfdir sharedstatedir localstatedir includedir \ + oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ + libdir localedir mandir +do + eval ac_val=\$$ac_var + # Remove trailing slashes. + case $ac_val in + */ ) + ac_val=`expr "X$ac_val" : 'X\(.*[^/]\)' \| "X$ac_val" : 'X\(.*\)'` + eval $ac_var=\$ac_val;; + esac + # Be sure to have absolute directory names. + case $ac_val in + [\\/$]* | ?:[\\/]* ) continue;; + NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac + { $as_echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 + { (exit 1); exit 1; }; } +done + +# There might be people who depend on the old broken behavior: `$host' +# used to hold the argument of --host etc. +# FIXME: To remove some day. +build=$build_alias +host=$host_alias +target=$target_alias + +# FIXME: To remove some day. +if test "x$host_alias" != x; then + if test "x$build_alias" = x; then + cross_compiling=maybe + $as_echo "$as_me: WARNING: If you wanted to set the --build type, don't use --host. + If a cross compiler is detected then cross compile mode will be used." >&2 + elif test "x$build_alias" != "x$host_alias"; then + cross_compiling=yes + fi +fi + +ac_tool_prefix= +test -n "$host_alias" && ac_tool_prefix=$host_alias- + +test "$silent" = yes && exec 6>/dev/null + + +ac_pwd=`pwd` && test -n "$ac_pwd" && +ac_ls_di=`ls -di .` && +ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || + { $as_echo "$as_me: error: working directory cannot be determined" >&2 + { (exit 1); exit 1; }; } +test "X$ac_ls_di" = "X$ac_pwd_ls_di" || + { $as_echo "$as_me: error: pwd does not report name of working directory" >&2 + { (exit 1); exit 1; }; } + + +# Find the source files, if location was not specified. +if test -z "$srcdir"; then + ac_srcdir_defaulted=yes + # Try the directory containing this script, then the parent directory. + ac_confdir=`$as_dirname -- "$as_myself" || +$as_expr X"$as_myself" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_myself" : 'X\(//\)[^/]' \| \ + X"$as_myself" : 'X\(//\)$' \| \ + X"$as_myself" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_myself" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + srcdir=$ac_confdir + if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi +else + ac_srcdir_defaulted=no +fi +if test ! -r "$srcdir/$ac_unique_file"; then + test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." + { $as_echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } +fi +ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" +ac_abs_confdir=`( + cd "$srcdir" && test -r "./$ac_unique_file" || { $as_echo "$as_me: error: $ac_msg" >&2 + { (exit 1); exit 1; }; } + pwd)` +# When building in place, set srcdir=. +if test "$ac_abs_confdir" = "$ac_pwd"; then + srcdir=. +fi +# Remove unnecessary trailing slashes from srcdir. +# Double slashes in file names in object file debugging info +# mess up M-x gdb in Emacs. +case $srcdir in +*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; +esac +for ac_var in $ac_precious_vars; do + eval ac_env_${ac_var}_set=\${${ac_var}+set} + eval ac_env_${ac_var}_value=\$${ac_var} + eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} + eval ac_cv_env_${ac_var}_value=\$${ac_var} +done + +# +# Report the --help message. +# +if test "$ac_init_help" = "long"; then + # Omit some internal or obsolete options to make the list less imposing. + # This message is too long to be a string in the A/UX 3.1 sh. + cat <<_ACEOF +\`configure' configures bld-test-texk-one 1.1 to adapt to many kinds of systems. + +Usage: $0 [OPTION]... [VAR=VALUE]... + +To assign environment variables (e.g., CC, CFLAGS...), specify them as +VAR=VALUE. See below for descriptions of some of the useful variables. + +Defaults for the options are specified in brackets. + +Configuration: + -h, --help display this help and exit + --help=short display options specific to this package + --help=recursive display the short help of all the included packages + -V, --version display version information and exit + -q, --quiet, --silent do not print \`checking...' messages + --cache-file=FILE cache test results in FILE [disabled] + -C, --config-cache alias for \`--cache-file=config.cache' + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] + --exec-prefix=EPREFIX install architecture-dependent files in EPREFIX + [PREFIX] + +By default, \`make install' will install all the files in +\`$ac_default_prefix/bin', \`$ac_default_prefix/lib' etc. You can specify +an installation prefix other than \`$ac_default_prefix' using \`--prefix', +for instance \`--prefix=\$HOME'. + +For better control, use the options below. + +Fine tuning of the installation directories: + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] + --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] + --datadir=DIR read-only architecture-independent data [DATAROOTDIR] + --infodir=DIR info documentation [DATAROOTDIR/info] + --localedir=DIR locale-dependent data [DATAROOTDIR/locale] + --mandir=DIR man documentation [DATAROOTDIR/man] + --docdir=DIR documentation root + [DATAROOTDIR/doc/bld-test-texk-one] + --htmldir=DIR html documentation [DOCDIR] + --dvidir=DIR dvi documentation [DOCDIR] + --pdfdir=DIR pdf documentation [DOCDIR] + --psdir=DIR ps documentation [DOCDIR] +_ACEOF + + cat <<\_ACEOF + +Program names: + --program-prefix=PREFIX prepend PREFIX to installed program names + --program-suffix=SUFFIX append SUFFIX to installed program names + --program-transform-name=PROGRAM run sed PROGRAM on installed program names + +System types: + --build=BUILD configure for building on BUILD [guessed] + --host=HOST cross-compile to build programs to run on HOST [BUILD] +_ACEOF +fi + +if test -n "$ac_init_help"; then + case $ac_init_help in + short | recursive ) echo "Configuration of bld-test-texk-one 1.1:";; + esac + cat <<\_ACEOF + +Optional Features: + --disable-option-checking ignore unrecognized --enable/--with options + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] + --enable-maintainer-mode enable make rules and dependencies not useful + (and sometimes confusing) to the casual installer + --enable-shared[=PKGS] build shared libraries [default=yes] + --enable-static[=PKGS] build static libraries [default=yes] + --enable-fast-install[=PKGS] + optimize for fast installation [default=yes] + --disable-dependency-tracking speeds up one-time build + --enable-dependency-tracking do not reject slow dependency extractors + --disable-libtool-lock avoid locking (might break parallel builds) + +Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) + --with-pic try to use only PIC/non-PIC objects [default=use + both] + --with-gnu-ld assume the C compiler uses GNU ld [default=no] + --with-system-zlib use installed zlib headers and library + --with-zlib-includes=DIR + zlib headers installed in DIR + --with-zlib-libdir=DIR zlib library installed in DIR + --with-system-libpng use installed libpng headers and library + --with-libpng-includes=DIR + libpng headers installed in DIR + --with-libpng-libdir=DIR + libpng library installed in DIR + --with-system-t1lib use installed t1lib headers and library + --with-t1lib-includes=DIR + t1lib headers installed in DIR + --with-t1lib-libdir=DIR t1lib library installed in DIR + --with-system-freetype2 use installed freetype2 headers and library + --with-freetype2-includes=DIR + freetype2 headers installed in DIR + --with-freetype2-libdir=DIR + freetype2 library installed in DIR + --with-system-gd use installed gd headers and library + --with-gd-includes=DIR gd headers installed in DIR + --with-gd-libdir=DIR gd library installed in DIR + --with-system-graphite use installed graphite headers and library + --with-graphite-includes=DIR + graphite headers installed in DIR + --with-graphite-libdir=DIR + graphite library installed in DIR + --with-system-teckit use installed teckit headers and library + --with-teckit-includes=DIR + teckit headers installed in DIR + --with-teckit-libdir=DIR + teckit library installed in DIR + +Some influential environment variables: + CC C compiler command + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L<lib dir> if you have libraries in a + nonstandard directory <lib dir> + LIBS libraries to pass to the linker, e.g. -l<library> + CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I<include dir> if + you have headers in a nonstandard directory <include dir> + CPP C preprocessor + +Use these variables to override the choices made by `configure' or to help +it to find libraries and programs with nonstandard names/locations. + +Report bugs to <peb@mppmu.mpg.de>. +_ACEOF +ac_status=$? +fi + +if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue + test -d "$ac_dir" || + { cd "$srcdir" && ac_pwd=`pwd` && srcdir=. && test -d "$ac_dir"; } || + continue + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + cd "$ac_dir" || { ac_status=$?; continue; } + # Check for guested configure. + if test -f "$ac_srcdir/configure.gnu"; then + echo && + $SHELL "$ac_srcdir/configure.gnu" --help=recursive + elif test -f "$ac_srcdir/configure"; then + echo && + $SHELL "$ac_srcdir/configure" --help=recursive + else + $as_echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 + fi || ac_status=$? + cd "$ac_pwd" || { ac_status=$?; break; } + done +fi + +test -n "$ac_init_help" && exit $ac_status +if $ac_init_version; then + cat <<\_ACEOF +bld-test-texk-one configure 1.1 +generated by GNU Autoconf 2.63 + +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, +2002, 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +This configure script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it. +_ACEOF + exit +fi +cat >config.log <<_ACEOF +This file contains any messages produced by compilers while +running configure, to aid debugging if configure makes a mistake. + +It was created by bld-test-texk-one $as_me 1.1, which was +generated by GNU Autoconf 2.63. Invocation command line was + + $ $0 $@ + +_ACEOF +exec 5>>config.log +{ +cat <<_ASUNAME +## --------- ## +## Platform. ## +## --------- ## + +hostname = `(hostname || uname -n) 2>/dev/null | sed 1q` +uname -m = `(uname -m) 2>/dev/null || echo unknown` +uname -r = `(uname -r) 2>/dev/null || echo unknown` +uname -s = `(uname -s) 2>/dev/null || echo unknown` +uname -v = `(uname -v) 2>/dev/null || echo unknown` + +/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null || echo unknown` +/bin/uname -X = `(/bin/uname -X) 2>/dev/null || echo unknown` + +/bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` +/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` +/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` +/bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` +/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` +/bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` + +_ASUNAME + +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + $as_echo "PATH: $as_dir" +done +IFS=$as_save_IFS + +} >&5 + +cat >&5 <<_ACEOF + + +## ----------- ## +## Core tests. ## +## ----------- ## + +_ACEOF + + +# Keep a trace of the command line. +# Strip out --no-create and --no-recursion so they do not pile up. +# Strip out --silent because we don't want to record it for future runs. +# Also quote any args containing shell meta-characters. +# Make two passes to allow for proper duplicate-argument suppression. +ac_configure_args= +ac_configure_args0= +ac_configure_args1= +ac_must_keep_next=false +for ac_pass in 1 2 +do + for ac_arg + do + case $ac_arg in + -no-create | --no-c* | -n | -no-recursion | --no-r*) continue ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; + *\'*) + ac_arg=`$as_echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in + 1) ac_configure_args0="$ac_configure_args0 '$ac_arg'" ;; + 2) + ac_configure_args1="$ac_configure_args1 '$ac_arg'" + if test $ac_must_keep_next = true; then + ac_must_keep_next=false # Got value, back to normal. + else + case $ac_arg in + *=* | --config-cache | -C | -disable-* | --disable-* \ + | -enable-* | --enable-* | -gas | --g* | -nfp | --nf* \ + | -q | -quiet | --q* | -silent | --sil* | -v | -verb* \ + | -with-* | --with-* | -without-* | --without-* | --x) + case "$ac_configure_args0 " in + "$ac_configure_args1"*" '$ac_arg' "* ) continue ;; + esac + ;; + -* ) ac_must_keep_next=true ;; + esac + fi + ac_configure_args="$ac_configure_args '$ac_arg'" + ;; + esac + done +done +$as_unset ac_configure_args0 || test "${ac_configure_args0+set}" != set || { ac_configure_args0=; export ac_configure_args0; } +$as_unset ac_configure_args1 || test "${ac_configure_args1+set}" != set || { ac_configure_args1=; export ac_configure_args1; } + +# When interrupted or exit'd, cleanup temporary files, and complete +# config.log. We remove comments because anyway the quotes in there +# would cause problems or look ugly. +# WARNING: Use '\'' to represent an apostrophe within the trap. +# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. +trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { + echo + + cat <<\_ASBOX +## ---------------- ## +## Cache variables. ## +## ---------------- ## +_ASBOX + echo + # The following way of writing the cache mishandles newlines in values, +( + for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) $as_unset $ac_var ;; + esac ;; + esac + done + (set) 2>&1 | + case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + sed -n \ + "s/'\''/'\''\\\\'\'''\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" + ;; #( + *) + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) + echo + + cat <<\_ASBOX +## ----------------- ## +## Output variables. ## +## ----------------- ## +_ASBOX + echo + for ac_var in $ac_subst_vars + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +## ------------------- ## +## File substitutions. ## +## ------------------- ## +_ASBOX + echo + for ac_var in $ac_subst_files + do + eval ac_val=\$$ac_var + case $ac_val in + *\'\''*) ac_val=`$as_echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; + esac + $as_echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi + + if test -s confdefs.h; then + cat <<\_ASBOX +## ----------- ## +## confdefs.h. ## +## ----------- ## +_ASBOX + echo + cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + $as_echo "$as_me: caught signal $ac_signal" + $as_echo "$as_me: exit $exit_status" + } >&5 + rm -f core *.core core.conftest.* && + rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +' 0 +for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal +done +ac_signal=0 + +# confdefs.h avoids OS command line length limits that DEFS can exceed. +rm -f -r conftest* confdefs.h + +# Predefined preprocessor variables. + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_NAME "$PACKAGE_NAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_TARNAME "$PACKAGE_TARNAME" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_VERSION "$PACKAGE_VERSION" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_STRING "$PACKAGE_STRING" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE_BUGREPORT "$PACKAGE_BUGREPORT" +_ACEOF + + +# Let the site file select an alternate cache file if it wants to. +# Prefer an explicitly selected file to automatically selected ones. +ac_site_file1=NONE +ac_site_file2=NONE +if test -n "$CONFIG_SITE"; then + ac_site_file1=$CONFIG_SITE +elif test "x$prefix" != xNONE; then + ac_site_file1=$prefix/share/config.site + ac_site_file2=$prefix/etc/config.site +else + ac_site_file1=$ac_default_prefix/share/config.site + ac_site_file2=$ac_default_prefix/etc/config.site +fi +for ac_site_file in "$ac_site_file1" "$ac_site_file2" +do + test "x$ac_site_file" = xNONE && continue + if test -r "$ac_site_file"; then + { $as_echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 +$as_echo "$as_me: loading site script $ac_site_file" >&6;} + sed 's/^/| /' "$ac_site_file" >&5 + . "$ac_site_file" + fi +done + +if test -r "$cache_file"; then + # Some versions of bash will fail to source /dev/null (special + # files actually), so we avoid doing that. + if test -f "$cache_file"; then + { $as_echo "$as_me:$LINENO: loading cache $cache_file" >&5 +$as_echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in + [\\/]* | ?:[\\/]* ) . "$cache_file";; + *) . "./$cache_file";; + esac + fi +else + { $as_echo "$as_me:$LINENO: creating cache $cache_file" >&5 +$as_echo "$as_me: creating cache $cache_file" >&6;} + >$cache_file +fi + +# Check that the precious variables saved in the cache have kept the same +# value. +ac_cache_corrupted=false +for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set + eval ac_old_val=\$ac_cv_env_${ac_var}_value + eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { $as_echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,set) + { $as_echo "$as_me:$LINENO: error: \`$ac_var' was not set in the previous run" >&5 +$as_echo "$as_me: error: \`$ac_var' was not set in the previous run" >&2;} + ac_cache_corrupted=: ;; + ,);; + *) + if test "x$ac_old_val" != "x$ac_new_val"; then + # differences in whitespace do not lead to failure. + ac_old_val_w=`echo x $ac_old_val` + ac_new_val_w=`echo x $ac_new_val` + if test "$ac_old_val_w" != "$ac_new_val_w"; then + { $as_echo "$as_me:$LINENO: error: \`$ac_var' has changed since the previous run:" >&5 +$as_echo "$as_me: error: \`$ac_var' has changed since the previous run:" >&2;} + ac_cache_corrupted=: + else + { $as_echo "$as_me:$LINENO: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&5 +$as_echo "$as_me: warning: ignoring whitespace changes in \`$ac_var' since the previous run:" >&2;} + eval $ac_var=\$ac_old_val + fi + { $as_echo "$as_me:$LINENO: former value: \`$ac_old_val'" >&5 +$as_echo "$as_me: former value: \`$ac_old_val'" >&2;} + { $as_echo "$as_me:$LINENO: current value: \`$ac_new_val'" >&5 +$as_echo "$as_me: current value: \`$ac_new_val'" >&2;} + fi;; + esac + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in + *\'*) ac_arg=$ac_var=`$as_echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in + *" '$ac_arg' "*) ;; # Avoid dups. Use of quotes ensures accuracy. + *) ac_configure_args="$ac_configure_args '$ac_arg'" ;; + esac + fi +done +if $ac_cache_corrupted; then + { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} + { $as_echo "$as_me:$LINENO: error: changes in the environment can compromise the build" >&5 +$as_echo "$as_me: error: changes in the environment can compromise the build" >&2;} + { { $as_echo "$as_me:$LINENO: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&5 +$as_echo "$as_me: error: run \`make distclean' and/or \`rm $cache_file' and start over" >&2;} + { (exit 1); exit 1; }; } +fi + + + + + + + + + + + + + + + + + + + + + + + + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + + + +ac_aux_dir= +for ac_dir in ../../build-aux "$srcdir"/../../build-aux; do + if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break + elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break + elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi +done +if test -z "$ac_aux_dir"; then + { { $as_echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in ../../build-aux \"$srcdir\"/../../build-aux" >&5 +$as_echo "$as_me: error: cannot find install-sh or install.sh in ../../build-aux \"$srcdir\"/../../build-aux" >&2;} + { (exit 1); exit 1; }; } +fi + +# These three variables are undocumented and unsupported, +# and are intended to be withdrawn in a future Autoconf release. +# They can cause serious problems if a builder's source tree is in a directory +# whose full name contains unusual characters. +ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. +ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. +ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. + + + + +am__api_version='1.10' + +# Find a good install program. We prefer a C program (faster), +# so one script is as good as another. But avoid the broken or +# incompatible versions: +# SysV /etc/install, /usr/sbin/install +# SunOS /usr/etc/install +# IRIX /sbin/install +# AIX /bin/install +# AmigaOS /C/install, which installs bootblocks on floppy discs +# AIX 4 /usr/bin/installbsd, which doesn't work without a -g flag +# AFS /usr/afsws/bin/install, which mishandles nonexistent args +# SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" +# OS/2's system install, which has a completely different semantic +# ./install, which can be erroneously created by make from ./install.sh. +# Reject install programs that cannot install multiple files. +{ $as_echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +$as_echo_n "checking for a BSD-compatible install... " >&6; } +if test -z "$INSTALL"; then +if test "${ac_cv_path_install+set}" = set; then + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + # Account for people who put trailing slashes in PATH elements. +case $as_dir/ in + ./ | .// | /cC/* | \ + /etc/* | /usr/sbin/* | /usr/etc/* | /sbin/* | /usr/afsws/bin/* | \ + ?:\\/os2\\/install\\/* | ?:\\/OS2\\/INSTALL\\/* | \ + /usr/ucb/* ) ;; + *) + # OSF1 and SCO ODT 3.0 have their own names for install. + # Don't use installbsd from OSF since it installs stuff as root + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. + : + elif test $ac_prog = install && + grep pwplus "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # program-specific install script used by HP pwplus--don't use. + : + else + rm -rf conftest.one conftest.two conftest.dir + echo one > conftest.one + echo two > conftest.two + mkdir conftest.dir + if "$as_dir/$ac_prog$ac_exec_ext" -c conftest.one conftest.two "`pwd`/conftest.dir" && + test -s conftest.one && test -s conftest.two && + test -s conftest.dir/conftest.one && + test -s conftest.dir/conftest.two + then + ac_cv_path_install="$as_dir/$ac_prog$ac_exec_ext -c" + break 3 + fi + fi + fi + done + done + ;; +esac + +done +IFS=$as_save_IFS + +rm -rf conftest.one conftest.two conftest.dir + +fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else + # As a last resort, use the slow shell script. Don't cache a + # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi +fi +{ $as_echo "$as_me:$LINENO: result: $INSTALL" >&5 +$as_echo "$INSTALL" >&6; } + +# Use test -z because SunOS4 sh mishandles braces in ${var-val}. +# It thinks the first close brace ends the variable substitution. +test -z "$INSTALL_PROGRAM" && INSTALL_PROGRAM='${INSTALL}' + +test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}' + +test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +{ $as_echo "$as_me:$LINENO: checking whether build environment is sane" >&5 +$as_echo_n "checking whether build environment is sane... " >&6; } +# Just in case +sleep 1 +echo timestamp > conftest.file +# Do `set' in a subshell so we don't clobber the current shell's +# arguments. Must try -L first in case configure is actually a +# symlink; some systems play weird games with the mod time of symlinks +# (eg FreeBSD returns the mod time of the symlink's containing +# directory). +if ( + set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. + set X `ls -t $srcdir/configure conftest.file` + fi + rm -f conftest.file + if test "$*" != "X $srcdir/configure conftest.file" \ + && test "$*" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a + # broken ls alias from the environment. This has actually + # happened. Such a system could not be considered "sane". + { { $as_echo "$as_me:$LINENO: error: ls -t appears to fail. Make sure there is not a broken +alias in your environment" >&5 +$as_echo "$as_me: error: ls -t appears to fail. Make sure there is not a broken +alias in your environment" >&2;} + { (exit 1); exit 1; }; } + fi + + test "$2" = conftest.file + ) +then + # Ok. + : +else + { { $as_echo "$as_me:$LINENO: error: newly created file is older than distributed files! +Check your system clock" >&5 +$as_echo "$as_me: error: newly created file is older than distributed files! +Check your system clock" >&2;} + { (exit 1); exit 1; }; } +fi +{ $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } +test "$program_prefix" != NONE && + program_transform_name="s&^&$program_prefix&;$program_transform_name" +# Use a double $ so make ignores it. +test "$program_suffix" != NONE && + program_transform_name="s&\$&$program_suffix&;$program_transform_name" +# Double any \ or $. +# By default was `s,x,x', remove it if useless. +ac_script='s/[\\$]/&&/g;s/;s,x,x,$//' +program_transform_name=`$as_echo "$program_transform_name" | sed "$ac_script"` + +# expand $ac_aux_dir to an absolute path +am_aux_dir=`cd $ac_aux_dir && pwd` + +test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" +# Use eval to expand $SHELL +if eval "$MISSING --run true"; then + am_missing_run="$MISSING --run " +else + am_missing_run= + { $as_echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 +$as_echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} +fi + +{ $as_echo "$as_me:$LINENO: checking for a thread-safe mkdir -p" >&5 +$as_echo_n "checking for a thread-safe mkdir -p... " >&6; } +if test -z "$MKDIR_P"; then + if test "${ac_cv_path_mkdir+set}" = set; then + $as_echo_n "(cached) " >&6 +else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/opt/sfw/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in mkdir gmkdir; do + for ac_exec_ext in '' $ac_executable_extensions; do + { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; } || continue + case `"$as_dir/$ac_prog$ac_exec_ext" --version 2>&1` in #( + 'mkdir (GNU coreutils) '* | \ + 'mkdir (coreutils) '* | \ + 'mkdir (fileutils) '4.1*) + ac_cv_path_mkdir=$as_dir/$ac_prog$ac_exec_ext + break 3;; + esac + done + done +done +IFS=$as_save_IFS + +fi + + if test "${ac_cv_path_mkdir+set}" = set; then + MKDIR_P="$ac_cv_path_mkdir -p" + else + # As a last resort, use the slow shell script. Don't cache a + # value for MKDIR_P within a source directory, because that will + # break other packages using the cache if that directory is + # removed, or if the value is a relative name. + test -d ./--version && rmdir ./--version + MKDIR_P="$ac_install_sh -d" + fi +fi +{ $as_echo "$as_me:$LINENO: result: $MKDIR_P" >&5 +$as_echo "$MKDIR_P" >&6; } + +mkdir_p="$MKDIR_P" +case $mkdir_p in + [\\/$]* | ?:[\\/]*) ;; + */*) mkdir_p="\$(top_builddir)/$mkdir_p" ;; +esac + +for ac_prog in gawk mawk nawk awk +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_AWK+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$AWK"; then + ac_cv_prog_AWK="$AWK" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AWK="$ac_prog" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +AWK=$ac_cv_prog_AWK +if test -n "$AWK"; then + { $as_echo "$as_me:$LINENO: result: $AWK" >&5 +$as_echo "$AWK" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$AWK" && break +done + +{ $as_echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +$as_echo_n "checking whether ${MAKE-make} sets \$(MAKE)... " >&6; } +set x ${MAKE-make} +ac_make=`$as_echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` +if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.make <<\_ACEOF +SHELL = /bin/sh +all: + @echo '@@@%%%=$(MAKE)=@@@%%%' +_ACEOF +# GNU make sometimes prints "make[1]: Entering...", which would confuse us. +case `${MAKE-make} -f conftest.make 2>/dev/null` in + *@@@%%%=?*=@@@%%%*) + eval ac_cv_prog_make_${ac_make}_set=yes;; + *) + eval ac_cv_prog_make_${ac_make}_set=no;; +esac +rm -f conftest.make +fi +if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } + SET_MAKE= +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" +fi + +rm -rf .tst 2>/dev/null +mkdir .tst 2>/dev/null +if test -d .tst; then + am__leading_dot=. +else + am__leading_dot=_ +fi +rmdir .tst 2>/dev/null + +if test "`cd $srcdir && pwd`" != "`pwd`"; then + # Use -I$(srcdir) only when $(srcdir) != ., so that make's output + # is not polluted with repeated "-I." + am__isrc=' -I$(srcdir)' + # test to see if srcdir already configured + if test -f $srcdir/config.status; then + { { $as_echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 +$as_echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} + { (exit 1); exit 1; }; } + fi +fi + +# test whether we have cygpath +if test -z "$CYGPATH_W"; then + if (cygpath --version) >/dev/null 2>/dev/null; then + CYGPATH_W='cygpath -w' + else + CYGPATH_W=echo + fi +fi + + +# Define the identity of the package. + PACKAGE='bld-test-texk-one' + VERSION='1.1' + + +cat >>confdefs.h <<_ACEOF +#define PACKAGE "$PACKAGE" +_ACEOF + + +cat >>confdefs.h <<_ACEOF +#define VERSION "$VERSION" +_ACEOF + +# Some tools Automake needs. + +ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} + + +AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} + + +AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} + + +AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} + + +MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} + +install_sh=${install_sh-"\$(SHELL) $am_aux_dir/install-sh"} + +# Installed binaries are usually stripped using `strip' when the user +# run `make install-strip'. However `strip' might not be the right +# tool to use in cross-compilation environments, therefore Automake +# will honor the `STRIP' environment variable to overrule this program. +if test "$cross_compiling" != no; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_STRIP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:$LINENO: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +fi +INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s" + +# We need awk for the "check" target. The system "awk" is bad on +# some platforms. +# Always define AMTAR for backward compatibility. + +AMTAR=${AMTAR-"${am_missing_run}tar"} + +am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' + + + + + +{ $as_echo "$as_me:$LINENO: checking whether to enable maintainer-specific portions of Makefiles" >&5 +$as_echo_n "checking whether to enable maintainer-specific portions of Makefiles... " >&6; } + # Check whether --enable-maintainer-mode was given. +if test "${enable_maintainer_mode+set}" = set; then + enableval=$enable_maintainer_mode; USE_MAINTAINER_MODE=$enableval +else + USE_MAINTAINER_MODE=no +fi + + { $as_echo "$as_me:$LINENO: result: $USE_MAINTAINER_MODE" >&5 +$as_echo "$USE_MAINTAINER_MODE" >&6; } + if test $USE_MAINTAINER_MODE = yes; then + MAINTAINER_MODE_TRUE= + MAINTAINER_MODE_FALSE='#' +else + MAINTAINER_MODE_TRUE='#' + MAINTAINER_MODE_FALSE= +fi + + MAINT=$MAINTAINER_MODE_TRUE + + + + +case `pwd` in + *\ * | *\ *) + { $as_echo "$as_me:$LINENO: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&5 +$as_echo "$as_me: WARNING: Libtool does not cope well with whitespace in \`pwd\`" >&2;} ;; +esac + + + +macro_version='2.2.6' +macro_revision='1.3012' + + + + + + + + + + + + + +ltmain="$ac_aux_dir/ltmain.sh" + +# Make sure we can run config.sub. +$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || + { { $as_echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 +$as_echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} + { (exit 1); exit 1; }; } + +{ $as_echo "$as_me:$LINENO: checking build system type" >&5 +$as_echo_n "checking build system type... " >&6; } +if test "${ac_cv_build+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_build_alias=$build_alias +test "x$ac_build_alias" = x && + ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` +test "x$ac_build_alias" = x && + { { $as_echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 +$as_echo "$as_me: error: cannot guess build type; you must specify one" >&2;} + { (exit 1); exit 1; }; } +ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || + { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 +$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} + { (exit 1); exit 1; }; } + +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_build" >&5 +$as_echo "$ac_cv_build" >&6; } +case $ac_cv_build in +*-*-*) ;; +*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 +$as_echo "$as_me: error: invalid value of canonical build" >&2;} + { (exit 1); exit 1; }; };; +esac +build=$ac_cv_build +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_build +shift +build_cpu=$1 +build_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +build_os=$* +IFS=$ac_save_IFS +case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +{ $as_echo "$as_me:$LINENO: checking host system type" >&5 +$as_echo_n "checking host system type... " >&6; } +if test "${ac_cv_host+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test "x$host_alias" = x; then + ac_cv_host=$ac_cv_build +else + ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || + { { $as_echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 +$as_echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} + { (exit 1); exit 1; }; } +fi + +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_host" >&5 +$as_echo "$ac_cv_host" >&6; } +case $ac_cv_host in +*-*-*) ;; +*) { { $as_echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 +$as_echo "$as_me: error: invalid value of canonical host" >&2;} + { (exit 1); exit 1; }; };; +esac +host=$ac_cv_host +ac_save_IFS=$IFS; IFS='-' +set x $ac_cv_host +shift +host_cpu=$1 +host_vendor=$2 +shift; shift +# Remember, the first character of IFS is used to create $*, +# except with old shells: +host_os=$* +IFS=$ac_save_IFS +case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + +DEPDIR="${am__leading_dot}deps" + +ac_config_commands="$ac_config_commands depfiles" + + +am_make=${MAKE-make} +cat > confinc << 'END' +am__doit: + @echo done +.PHONY: am__doit +END +# If we don't find an include directive, just comment out the code. +{ $as_echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 +$as_echo_n "checking for style of include used by $am_make... " >&6; } +am__include="#" +am__quote= +_am_result=none +# First try GNU make style include. +echo "include confinc" > confmf +# We grep out `Entering directory' and `Leaving directory' +# messages which can occur if `w' ends up in MAKEFLAGS. +# In particular we don't look at `^make:' because GNU make might +# be invoked under some other name (usually "gmake"), in which +# case it prints its new name instead of `make'. +if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then + am__include=include + am__quote= + _am_result=GNU +fi +# Now try BSD make style include. +if test "$am__include" = "#"; then + echo '.include "confinc"' > confmf + if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then + am__include=.include + am__quote="\"" + _am_result=BSD + fi +fi + + +{ $as_echo "$as_me:$LINENO: result: $_am_result" >&5 +$as_echo "$_am_result" >&6; } +rm -f confinc confmf + +# Check whether --enable-dependency-tracking was given. +if test "${enable_dependency_tracking+set}" = set; then + enableval=$enable_dependency_tracking; +fi + +if test "x$enable_dependency_tracking" != xno; then + am_depcomp="$ac_aux_dir/depcomp" + AMDEPBACKSLASH='\' +fi + if test "x$enable_dependency_tracking" != xno; then + AMDEP_TRUE= + AMDEP_FALSE='#' +else + AMDEP_TRUE='#' + AMDEP_FALSE= +fi + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. +set dummy ${ac_tool_prefix}gcc; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_CC+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:$LINENO: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. +set dummy gcc; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="gcc" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +else + CC="$ac_cv_prog_CC" +fi + +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. +set dummy ${ac_tool_prefix}cc; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_CC+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:$LINENO: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + + fi +fi +if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. +set dummy cc; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_CC+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else + ac_prog_rejected=no +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue + fi + ac_cv_prog_CC="cc" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. + set dummy $ac_cv_prog_CC + shift + if test $# != 0; then + # We chose a different compiler from the bogus one. + # However, it has the same basename, so the bogon will be chosen + # first if we set CC to just the basename; use the full file name. + shift + ac_cv_prog_CC="$as_dir/$ac_word${1+' '}$@" + fi +fi +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:$LINENO: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then + for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_CC+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$CC"; then + ac_cv_prog_CC="$CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +CC=$ac_cv_prog_CC +if test -n "$CC"; then + { $as_echo "$as_me:$LINENO: result: $CC" >&5 +$as_echo "$CC" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$CC" && break + done +fi +if test -z "$CC"; then + ac_ct_CC=$CC + for ac_prog in cl.exe +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_CC"; then + ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="$ac_prog" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_CC=$ac_cv_prog_ac_ct_CC +if test -n "$ac_ct_CC"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +$as_echo "$ac_ct_CC" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_CC" && break +done + + if test "x$ac_ct_CC" = x; then + CC="" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + CC=$ac_ct_CC + fi +fi + +fi + + +test -z "$CC" && { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: no acceptable C compiler found in \$PATH +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } + +# Provide some information about the compiler. +$as_echo "$as_me:$LINENO: checking for C compiler version" >&5 +set X $ac_compile +ac_compiler=$2 +{ (ac_try="$ac_compiler --version >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -v >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +{ (ac_try="$ac_compiler -V >&5" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files a.out a.out.dSYM a.exe b.out" +# Try to create an executable without -o first, disregard a.out. +# It will help us diagnose broken compilers, and finding out an intuition +# of exeext. +{ $as_echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 +$as_echo_n "checking for C compiler default output file name... " >&6; } +ac_link_default=`$as_echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` + +# The possible output files: +ac_files="a.out conftest.exe conftest a.exe a_out.exe b.out conftest.*" + +ac_rmfiles= +for ac_file in $ac_files +do + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + * ) ac_rmfiles="$ac_rmfiles $ac_file";; + esac +done +rm -f $ac_rmfiles + +if { (ac_try="$ac_link_default" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link_default") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. +# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' +# in a Makefile. We should not override ac_cv_exeext if it was cached, +# so that the user can short-circuit this test for compilers unknown to +# Autoconf. +for ac_file in $ac_files '' +do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) + if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; + then :; else + ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + fi + # We set ac_cv_exeext here because the later test for it is not + # safe: cross compilers may not add the suffix if given an `-o' + # argument, so we may need to know it at that point already. + # Even if this section looks crufty: it has the advantage of + # actually working. + break;; + * ) + break;; + esac +done +test "$ac_cv_exeext" = no && ac_cv_exeext= + +else + ac_file='' +fi + +{ $as_echo "$as_me:$LINENO: result: $ac_file" >&5 +$as_echo "$ac_file" >&6; } +if test -z "$ac_file"; then + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: C compiler cannot create executables +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: C compiler cannot create executables +See \`config.log' for more details." >&2;} + { (exit 77); exit 77; }; }; } +fi + +ac_exeext=$ac_cv_exeext + +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +$as_echo_n "checking whether the C compiler works... " >&6; } +# FIXME: These cross compiler hacks should be removed for Autoconf 3.0 +# If not cross compiling, check that we can run a simple program. +if test "$cross_compiling" != yes; then + if { ac_try='./$ac_file' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + cross_compiling=no + else + if test "$cross_compiling" = maybe; then + cross_compiling=yes + else + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: cannot run C compiled programs. +If you meant to cross compile, use \`--host'. +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } + fi + fi +fi +{ $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } + +rm -f -r a.out a.out.dSYM a.exe conftest$ac_cv_exeext b.out +ac_clean_files=$ac_clean_files_save +# Check that the compiler produces executables we can run. If not, either +# the compiler is broken, or we cross compile. +{ $as_echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +$as_echo_n "checking whether we are cross compiling... " >&6; } +{ $as_echo "$as_me:$LINENO: result: $cross_compiling" >&5 +$as_echo "$cross_compiling" >&6; } + +{ $as_echo "$as_me:$LINENO: checking for suffix of executables" >&5 +$as_echo_n "checking for suffix of executables... " >&6; } +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # If both `conftest.exe' and `conftest' are `present' (well, observable) +# catch `conftest.exe'. For instance with Cygwin, `ls conftest' will +# work properly (i.e., refer to `conftest.exe'), while it won't with +# `rm'. +for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` + break;; + * ) break;; + esac +done +else + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: cannot compute suffix of executables: cannot compile and link +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } +fi + +rm -f conftest$ac_cv_exeext +{ $as_echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +$as_echo "$ac_cv_exeext" >&6; } + +rm -f conftest.$ac_ext +EXEEXT=$ac_cv_exeext +ac_exeext=$EXEEXT +{ $as_echo "$as_me:$LINENO: checking for suffix of object files" >&5 +$as_echo_n "checking for suffix of object files... " >&6; } +if test "${ac_cv_objext+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.o conftest.obj +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + for ac_file in conftest.o conftest.obj conftest.*; do + test -f "$ac_file" || continue; + case $ac_file in + *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.dSYM ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +done +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +{ { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: cannot compute suffix of object files: cannot compile +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } +fi + +rm -f conftest.$ac_cv_objext conftest.$ac_ext +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +$as_echo "$ac_cv_objext" >&6; } +OBJEXT=$ac_cv_objext +ac_objext=$OBJEXT +{ $as_echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +$as_echo_n "checking whether we are using the GNU C compiler... " >&6; } +if test "${ac_cv_c_compiler_gnu+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ +#ifndef __GNUC__ + choke me +#endif + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_compiler_gnu=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_compiler_gnu=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +ac_cv_c_compiler_gnu=$ac_compiler_gnu + +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +$as_echo "$ac_cv_c_compiler_gnu" >&6; } +if test $ac_compiler_gnu = yes; then + GCC=yes +else + GCC= +fi +ac_test_CFLAGS=${CFLAGS+set} +ac_save_CFLAGS=$CFLAGS +{ $as_echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +$as_echo_n "checking whether $CC accepts -g... " >&6; } +if test "${ac_cv_prog_cc_g+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_save_c_werror_flag=$ac_c_werror_flag + ac_c_werror_flag=yes + ac_cv_prog_cc_g=no + CFLAGS="-g" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_g=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + CFLAGS="" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + : +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_c_werror_flag=$ac_save_c_werror_flag + CFLAGS="-g" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_g=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_c_werror_flag=$ac_save_c_werror_flag +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +$as_echo "$ac_cv_prog_cc_g" >&6; } +if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS +elif test $ac_cv_prog_cc_g = yes; then + if test "$GCC" = yes; then + CFLAGS="-g -O2" + else + CFLAGS="-g" + fi +else + if test "$GCC" = yes; then + CFLAGS="-O2" + else + CFLAGS= + fi +fi +{ $as_echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 +$as_echo_n "checking for $CC option to accept ISO C89... " >&6; } +if test "${ac_cv_prog_cc_c89+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_cv_prog_cc_c89=no +ac_save_CC=$CC +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <stdarg.h> +#include <stdio.h> +#include <sys/types.h> +#include <sys/stat.h> +/* Most of the following tests are stolen from RCS 5.7's src/conf.sh. */ +struct buf { int x; }; +FILE * (*rcsopen) (struct buf *, struct stat *, int); +static char *e (p, i) + char **p; + int i; +{ + return p[i]; +} +static char *f (char * (*g) (char **, int), char **p, ...) +{ + char *s; + va_list v; + va_start (v,p); + s = g (p, va_arg (v,int)); + va_end (v); + return s; +} + +/* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated + as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something + that's true only with -std. */ +int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + +/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters + inside strings and character constants. */ +#define FOO(x) 'x' +int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; + +int test (int i, double x); +struct s1 {int (*f) (int a);}; +struct s2 {int (*f) (double a);}; +int pairnames (int, char **, FILE *(*)(struct buf *, struct stat *, int), int, int); +int argc; +char **argv; +int +main () +{ +return f (e, argv, 0) != argv[0] || f (e, argv, 1) != argv[1]; + ; + return 0; +} +_ACEOF +for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ + -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" +do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_c89=$ac_arg +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -f core conftest.err conftest.$ac_objext + test "x$ac_cv_prog_cc_c89" != "xno" && break +done +rm -f conftest.$ac_ext +CC=$ac_save_CC + +fi +# AC_CACHE_VAL +case "x$ac_cv_prog_cc_c89" in + x) + { $as_echo "$as_me:$LINENO: result: none needed" >&5 +$as_echo "none needed" >&6; } ;; + xno) + { $as_echo "$as_me:$LINENO: result: unsupported" >&5 +$as_echo "unsupported" >&6; } ;; + *) + CC="$CC $ac_cv_prog_cc_c89" + { $as_echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 +$as_echo "$ac_cv_prog_cc_c89" >&6; } ;; +esac + + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +depcc="$CC" am_compiler_list= + +{ $as_echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 +$as_echo_n "checking dependency style of $depcc... " >&6; } +if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then + # We make a subdir and do the tests there. Otherwise we can end up + # making bogus files that we don't know about and never remove. For + # instance it was reported that on HP-UX the gcc test will end up + # making a dummy file named `D' -- because `-MD' means `put the output + # in D'. + mkdir conftest.dir + # Copy depcomp to subdir because otherwise we won't find it if we're + # using a relative directory. + cp "$am_depcomp" conftest.dir + cd conftest.dir + # We will build objects and dependencies in a subdirectory because + # it helps to detect inapplicable dependency modes. For instance + # both Tru64's cc and ICC support -MD to output dependencies as a + # side effect of compilation, but ICC will put the dependencies in + # the current directory while Tru64 will put them in the object + # directory. + mkdir sub + + am_cv_CC_dependencies_compiler_type=none + if test "$am_compiler_list" = ""; then + am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` + fi + for depmode in $am_compiler_list; do + # Setup a source with many dependencies, because some compilers + # like to wrap large dependency lists on column 80 (with \), and + # we should not choose a depcomp mode which is confused by this. + # + # We need to recreate these files for each test, as the compiler may + # overwrite some of them when testing with obscure command lines. + # This happens at least with the AIX C compiler. + : > sub/conftest.c + for i in 1 2 3 4 5 6; do + echo '#include "conftst'$i'.h"' >> sub/conftest.c + # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with + # Solaris 8's {/usr,}/bin/sh. + touch sub/conftst$i.h + done + echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + + case $depmode in + nosideeffect) + # after this tag, mechanisms are not by side-effect, so they'll + # only be used when explicitly requested + if test "x$enable_dependency_tracking" = xyes; then + continue + else + break + fi + ;; + none) break ;; + esac + # We check with `-c' and `-o' for the sake of the "dashmstdout" + # mode. It turns out that the SunPro C++ compiler does not properly + # handle `-M -o', and we need to detect this. + if depmode=$depmode \ + source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ + depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ + $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ + >/dev/null 2>conftest.err && + grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && + grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && + ${MAKE-make} -s -f confmf > /dev/null 2>&1; then + # icc doesn't choke on unknown options, it will just issue warnings + # or remarks (even with -Werror). So we grep stderr for any message + # that says an option was ignored or not supported. + # When given -MP, icc 7.0 and 7.1 complain thusly: + # icc: Command line warning: ignoring option '-M'; no argument required + # The diagnosis changed in icc 8.0: + # icc: Command line remark: option '-MP' not supported + if (grep 'ignoring option' conftest.err || + grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else + am_cv_CC_dependencies_compiler_type=$depmode + break + fi + fi + done + + cd .. + rm -rf conftest.dir +else + am_cv_CC_dependencies_compiler_type=none +fi + +fi +{ $as_echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 +$as_echo "$am_cv_CC_dependencies_compiler_type" >&6; } +CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type + + if + test "x$enable_dependency_tracking" != xno \ + && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then + am__fastdepCC_TRUE= + am__fastdepCC_FALSE='#' +else + am__fastdepCC_TRUE='#' + am__fastdepCC_FALSE= +fi + + +{ $as_echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 +$as_echo_n "checking for a sed that does not truncate output... " >&6; } +if test "${ac_cv_path_SED+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_script=s/aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa/bbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbbb/ + for ac_i in 1 2 3 4 5 6 7; do + ac_script="$ac_script$as_nl$ac_script" + done + echo "$ac_script" 2>/dev/null | sed 99q >conftest.sed + $as_unset ac_script || ac_script= + if test -z "$SED"; then + ac_path_SED_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in sed gsed; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_SED="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_SED" && $as_test_x "$ac_path_SED"; } || continue +# Check for GNU ac_path_SED and select it if it is found. + # Check for GNU $ac_path_SED +case `"$ac_path_SED" --version 2>&1` in +*GNU*) + ac_cv_path_SED="$ac_path_SED" ac_path_SED_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo '' >> "conftest.nl" + "$ac_path_SED" -f conftest.sed < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` + if test $ac_count -gt ${ac_path_SED_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_SED="$ac_path_SED" + ac_path_SED_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_SED_found && break 3 + done + done +done +IFS=$as_save_IFS + if test -z "$ac_cv_path_SED"; then + { { $as_echo "$as_me:$LINENO: error: no acceptable sed could be found in \$PATH" >&5 +$as_echo "$as_me: error: no acceptable sed could be found in \$PATH" >&2;} + { (exit 1); exit 1; }; } + fi +else + ac_cv_path_SED=$SED +fi + +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_SED" >&5 +$as_echo "$ac_cv_path_SED" >&6; } + SED="$ac_cv_path_SED" + rm -f conftest.sed + +test -z "$SED" && SED=sed +Xsed="$SED -e 1s/^X//" + + + + + + + + + + + +{ $as_echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 +$as_echo_n "checking for grep that handles long lines and -e... " >&6; } +if test "${ac_cv_path_GREP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -z "$GREP"; then + ac_path_GREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in grep ggrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue +# Check for GNU ac_path_GREP and select it if it is found. + # Check for GNU $ac_path_GREP +case `"$ac_path_GREP" --version 2>&1` in +*GNU*) + ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'GREP' >> "conftest.nl" + "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` + if test $ac_count -gt ${ac_path_GREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_GREP="$ac_path_GREP" + ac_path_GREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_GREP_found && break 3 + done + done +done +IFS=$as_save_IFS + if test -z "$ac_cv_path_GREP"; then + { { $as_echo "$as_me:$LINENO: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +$as_echo "$as_me: error: no acceptable grep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } + fi +else + ac_cv_path_GREP=$GREP +fi + +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 +$as_echo "$ac_cv_path_GREP" >&6; } + GREP="$ac_cv_path_GREP" + + +{ $as_echo "$as_me:$LINENO: checking for egrep" >&5 +$as_echo_n "checking for egrep... " >&6; } +if test "${ac_cv_path_EGREP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 + then ac_cv_path_EGREP="$GREP -E" + else + if test -z "$EGREP"; then + ac_path_EGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in egrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue +# Check for GNU ac_path_EGREP and select it if it is found. + # Check for GNU $ac_path_EGREP +case `"$ac_path_EGREP" --version 2>&1` in +*GNU*) + ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'EGREP' >> "conftest.nl" + "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` + if test $ac_count -gt ${ac_path_EGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_EGREP="$ac_path_EGREP" + ac_path_EGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_EGREP_found && break 3 + done + done +done +IFS=$as_save_IFS + if test -z "$ac_cv_path_EGREP"; then + { { $as_echo "$as_me:$LINENO: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +$as_echo "$as_me: error: no acceptable egrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } + fi +else + ac_cv_path_EGREP=$EGREP +fi + + fi +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 +$as_echo "$ac_cv_path_EGREP" >&6; } + EGREP="$ac_cv_path_EGREP" + + +{ $as_echo "$as_me:$LINENO: checking for fgrep" >&5 +$as_echo_n "checking for fgrep... " >&6; } +if test "${ac_cv_path_FGREP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if echo 'ab*c' | $GREP -F 'ab*c' >/dev/null 2>&1 + then ac_cv_path_FGREP="$GREP -F" + else + if test -z "$FGREP"; then + ac_path_FGREP_found=false + # Loop through the user's path and test for each of PROGNAME-LIST + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_prog in fgrep; do + for ac_exec_ext in '' $ac_executable_extensions; do + ac_path_FGREP="$as_dir/$ac_prog$ac_exec_ext" + { test -f "$ac_path_FGREP" && $as_test_x "$ac_path_FGREP"; } || continue +# Check for GNU ac_path_FGREP and select it if it is found. + # Check for GNU $ac_path_FGREP +case `"$ac_path_FGREP" --version 2>&1` in +*GNU*) + ac_cv_path_FGREP="$ac_path_FGREP" ac_path_FGREP_found=:;; +*) + ac_count=0 + $as_echo_n 0123456789 >"conftest.in" + while : + do + cat "conftest.in" "conftest.in" >"conftest.tmp" + mv "conftest.tmp" "conftest.in" + cp "conftest.in" "conftest.nl" + $as_echo 'FGREP' >> "conftest.nl" + "$ac_path_FGREP" FGREP < "conftest.nl" >"conftest.out" 2>/dev/null || break + diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break + ac_count=`expr $ac_count + 1` + if test $ac_count -gt ${ac_path_FGREP_max-0}; then + # Best one so far, save it but keep looking for a better one + ac_cv_path_FGREP="$ac_path_FGREP" + ac_path_FGREP_max=$ac_count + fi + # 10*(2^10) chars as input seems more than enough + test $ac_count -gt 10 && break + done + rm -f conftest.in conftest.tmp conftest.nl conftest.out;; +esac + + $ac_path_FGREP_found && break 3 + done + done +done +IFS=$as_save_IFS + if test -z "$ac_cv_path_FGREP"; then + { { $as_echo "$as_me:$LINENO: error: no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 +$as_echo "$as_me: error: no acceptable fgrep could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} + { (exit 1); exit 1; }; } + fi +else + ac_cv_path_FGREP=$FGREP +fi + + fi +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_path_FGREP" >&5 +$as_echo "$ac_cv_path_FGREP" >&6; } + FGREP="$ac_cv_path_FGREP" + + +test -z "$GREP" && GREP=grep + + + + + + + + + + + + + + + + + + + +# Check whether --with-gnu-ld was given. +if test "${with_gnu_ld+set}" = set; then + withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes +else + with_gnu_ld=no +fi + +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + { $as_echo "$as_me:$LINENO: checking for ld used by $CC" >&5 +$as_echo_n "checking for ld used by $CC... " >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' + # Canonicalize the pathname of ld + ac_prog=`$ECHO "$ac_prog"| $SED 's%\\\\%/%g'` + while $ECHO "$ac_prog" | $GREP "$re_direlt" > /dev/null 2>&1; do + ac_prog=`$ECHO $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + { $as_echo "$as_me:$LINENO: checking for GNU ld" >&5 +$as_echo_n "checking for GNU ld... " >&6; } +else + { $as_echo "$as_me:$LINENO: checking for non-GNU ld" >&5 +$as_echo_n "checking for non-GNU ld... " >&6; } +fi +if test "${lt_cv_path_LD+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -z "$LD"; then + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 </dev/null` in + *GNU* | *'with BFD'*) + test "$with_gnu_ld" != no && break + ;; + *) + test "$with_gnu_ld" != yes && break + ;; + esac + fi + done + IFS="$lt_save_ifs" +else + lt_cv_path_LD="$LD" # Let the user override the test with a path. +fi +fi + +LD="$lt_cv_path_LD" +if test -n "$LD"; then + { $as_echo "$as_me:$LINENO: result: $LD" >&5 +$as_echo "$LD" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi +test -z "$LD" && { { $as_echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 +$as_echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} + { (exit 1); exit 1; }; } +{ $as_echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 +$as_echo_n "checking if the linker ($LD) is GNU ld... " >&6; } +if test "${lt_cv_prog_gnu_ld+set}" = set; then + $as_echo_n "(cached) " >&6 +else + # I'd rather use --version here, but apparently some GNU lds only accept -v. +case `$LD -v 2>&1 </dev/null` in +*GNU* | *'with BFD'*) + lt_cv_prog_gnu_ld=yes + ;; +*) + lt_cv_prog_gnu_ld=no + ;; +esac +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 +$as_echo "$lt_cv_prog_gnu_ld" >&6; } +with_gnu_ld=$lt_cv_prog_gnu_ld + + + + + + + + + +{ $as_echo "$as_me:$LINENO: checking for BSD- or MS-compatible name lister (nm)" >&5 +$as_echo_n "checking for BSD- or MS-compatible name lister (nm)... " >&6; } +if test "${lt_cv_path_NM+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + lt_nm_to_check="${ac_tool_prefix}nm" + if test -n "$ac_tool_prefix" && test "$build" = "$host"; then + lt_nm_to_check="$lt_nm_to_check nm" + fi + for lt_tmp_nm in $lt_nm_to_check; do + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm="$ac_dir/$lt_tmp_nm" + if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in + */dev/null* | *'Invalid file or object type'*) + lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) + case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in + */dev/null*) + lt_cv_path_NM="$tmp_nm -p" + break + ;; + *) + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + ;; + esac + ;; + esac + fi + done + IFS="$lt_save_ifs" + done + : ${lt_cv_path_NM=no} +fi +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 +$as_echo "$lt_cv_path_NM" >&6; } +if test "$lt_cv_path_NM" != "no"; then + NM="$lt_cv_path_NM" +else + # Didn't find any BSD compatible name lister, look for dumpbin. + if test -n "$ac_tool_prefix"; then + for ac_prog in "dumpbin -symbols" "link -dump -symbols" + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. +set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_DUMPBIN+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$DUMPBIN"; then + ac_cv_prog_DUMPBIN="$DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_DUMPBIN="$ac_tool_prefix$ac_prog" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +DUMPBIN=$ac_cv_prog_DUMPBIN +if test -n "$DUMPBIN"; then + { $as_echo "$as_me:$LINENO: result: $DUMPBIN" >&5 +$as_echo "$DUMPBIN" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$DUMPBIN" && break + done +fi +if test -z "$DUMPBIN"; then + ac_ct_DUMPBIN=$DUMPBIN + for ac_prog in "dumpbin -symbols" "link -dump -symbols" +do + # Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_DUMPBIN+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DUMPBIN"; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_ct_DUMPBIN" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_DUMPBIN="$ac_prog" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_DUMPBIN=$ac_cv_prog_ac_ct_DUMPBIN +if test -n "$ac_ct_DUMPBIN"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_DUMPBIN" >&5 +$as_echo "$ac_ct_DUMPBIN" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + + test -n "$ac_ct_DUMPBIN" && break +done + + if test "x$ac_ct_DUMPBIN" = x; then + DUMPBIN=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DUMPBIN=$ac_ct_DUMPBIN + fi +fi + + + if test "$DUMPBIN" != ":"; then + NM="$DUMPBIN" + fi +fi +test -z "$NM" && NM=nm + + + + + + +{ $as_echo "$as_me:$LINENO: checking the name lister ($NM) interface" >&5 +$as_echo_n "checking the name lister ($NM) interface... " >&6; } +if test "${lt_cv_nm_interface+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_nm_interface="BSD nm" + echo "int some_variable = 0;" > conftest.$ac_ext + (eval echo "\"\$as_me:4436: $ac_compile\"" >&5) + (eval "$ac_compile" 2>conftest.err) + cat conftest.err >&5 + (eval echo "\"\$as_me:4439: $NM \\\"conftest.$ac_objext\\\"\"" >&5) + (eval "$NM \"conftest.$ac_objext\"" 2>conftest.err > conftest.out) + cat conftest.err >&5 + (eval echo "\"\$as_me:4442: output\"" >&5) + cat conftest.out >&5 + if $GREP 'External.*some_variable' conftest.out > /dev/null; then + lt_cv_nm_interface="MS dumpbin" + fi + rm -f conftest* +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_nm_interface" >&5 +$as_echo "$lt_cv_nm_interface" >&6; } + +{ $as_echo "$as_me:$LINENO: checking whether ln -s works" >&5 +$as_echo_n "checking whether ln -s works... " >&6; } +LN_S=$as_ln_s +if test "$LN_S" = "ln -s"; then + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no, using $LN_S" >&5 +$as_echo "no, using $LN_S" >&6; } +fi + +# find the maximum length of command line arguments +{ $as_echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 +$as_echo_n "checking the maximum length of command line arguments... " >&6; } +if test "${lt_cv_sys_max_cmd_len+set}" = set; then + $as_echo_n "(cached) " >&6 +else + i=0 + teststring="ABCD" + + case $build_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; + ;; + + cygwin* | mingw* | cegcc*) + # On Win9x/ME, this test blows up -- it succeeds, but takes + # about 5 minutes as the teststring grows exponentially. + # Worse, since 9x/ME are not pre-emptively multitasking, + # you end up with a "frozen" computer, even though with patience + # the test eventually succeeds (with a max line length of 256k). + # Instead, let's just punt: use the minimum linelength reported by + # all of the supported platforms: 8192 (on NT/2K/XP). + lt_cv_sys_max_cmd_len=8192; + ;; + + amigaos*) + # On AmigaOS with pdksh, this test takes hours, literally. + # So we just punt and use a minimum line length of 8192. + lt_cv_sys_max_cmd_len=8192; + ;; + + netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) + # This has been around since 386BSD, at least. Likely further. + if test -x /sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` + elif test -x /usr/sbin/sysctl; then + lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else + lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi + # And add a safety zone + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + + interix*) + # We know the value 262144 and hardcode it with a safety zone (like BSD) + lt_cv_sys_max_cmd_len=196608 + ;; + + osf*) + # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure + # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not + # nice to cause kernel panics so lets avoid the loop below. + # First set a reasonable default. + lt_cv_sys_max_cmd_len=16384 + # + if test -x /sbin/sysconfig; then + case `/sbin/sysconfig -q proc exec_disable_arg_limit` in + *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; + sco3.2v5*) + lt_cv_sys_max_cmd_len=102400 + ;; + sysv5* | sco5v6* | sysv4.2uw2*) + kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` + if test -n "$kargmax"; then + lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` + else + lt_cv_sys_max_cmd_len=32768 + fi + ;; + *) + lt_cv_sys_max_cmd_len=`(getconf ARG_MAX) 2> /dev/null` + if test -n "$lt_cv_sys_max_cmd_len"; then + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + else + # Make teststring a little bigger before we do anything with it. + # a 1K string should be a reasonable start. + for i in 1 2 3 4 5 6 7 8 ; do + teststring=$teststring$teststring + done + SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while { test "X"`$SHELL $0 --fallback-echo "X$teststring$teststring" 2>/dev/null` \ + = "XX$teststring$teststring"; } >/dev/null 2>&1 && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + teststring=$teststring$teststring + done + # Only check the string length outside the loop. + lt_cv_sys_max_cmd_len=`expr "X$teststring" : ".*" 2>&1` + teststring= + # Add a significant safety factor because C++ compilers can tack on + # massive amounts of additional arguments before passing them to the + # linker. It appears as though 1/2 is a usable value. + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` + fi + ;; + esac + +fi + +if test -n $lt_cv_sys_max_cmd_len ; then + { $as_echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 +$as_echo "$lt_cv_sys_max_cmd_len" >&6; } +else + { $as_echo "$as_me:$LINENO: result: none" >&5 +$as_echo "none" >&6; } +fi +max_cmd_len=$lt_cv_sys_max_cmd_len + + + + + + +: ${CP="cp -f"} +: ${MV="mv -f"} +: ${RM="rm -f"} + +{ $as_echo "$as_me:$LINENO: checking whether the shell understands some XSI constructs" >&5 +$as_echo_n "checking whether the shell understands some XSI constructs... " >&6; } +# Try some XSI features +xsi_shell=no +( _lt_dummy="a/b/c" + test "${_lt_dummy##*/},${_lt_dummy%/*},"${_lt_dummy%"$_lt_dummy"}, \ + = c,a/b,, \ + && eval 'test $(( 1 + 1 )) -eq 2 \ + && test "${#_lt_dummy}" -eq 5' ) >/dev/null 2>&1 \ + && xsi_shell=yes +{ $as_echo "$as_me:$LINENO: result: $xsi_shell" >&5 +$as_echo "$xsi_shell" >&6; } + + +{ $as_echo "$as_me:$LINENO: checking whether the shell understands \"+=\"" >&5 +$as_echo_n "checking whether the shell understands \"+=\"... " >&6; } +lt_shell_append=no +( foo=bar; set foo baz; eval "$1+=\$2" && test "$foo" = barbaz ) \ + >/dev/null 2>&1 \ + && lt_shell_append=yes +{ $as_echo "$as_me:$LINENO: result: $lt_shell_append" >&5 +$as_echo "$lt_shell_append" >&6; } + + +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + lt_unset=unset +else + lt_unset=false +fi + + + + + +# test EBCDIC or ASCII +case `echo X|tr X '\101'` in + A) # ASCII based system + # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr + lt_SP2NL='tr \040 \012' + lt_NL2SP='tr \015\012 \040\040' + ;; + *) # EBCDIC based system + lt_SP2NL='tr \100 \n' + lt_NL2SP='tr \r\n \100\100' + ;; +esac + + + + + + + + + +{ $as_echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 +$as_echo_n "checking for $LD option to reload object files... " >&6; } +if test "${lt_cv_ld_reload_flag+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_reload_flag='-r' +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 +$as_echo "$lt_cv_ld_reload_flag" >&6; } +reload_flag=$lt_cv_ld_reload_flag +case $reload_flag in +"" | " "*) ;; +*) reload_flag=" $reload_flag" ;; +esac +reload_cmds='$LD$reload_flag -o $output$reload_objs' +case $host_os in + darwin*) + if test "$GCC" = yes; then + reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' + else + reload_cmds='$LD$reload_flag -o $output$reload_objs' + fi + ;; +esac + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}objdump", so it can be a program name with args. +set dummy ${ac_tool_prefix}objdump; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_OBJDUMP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$OBJDUMP"; then + ac_cv_prog_OBJDUMP="$OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_OBJDUMP="${ac_tool_prefix}objdump" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +OBJDUMP=$ac_cv_prog_OBJDUMP +if test -n "$OBJDUMP"; then + { $as_echo "$as_me:$LINENO: result: $OBJDUMP" >&5 +$as_echo "$OBJDUMP" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OBJDUMP"; then + ac_ct_OBJDUMP=$OBJDUMP + # Extract the first word of "objdump", so it can be a program name with args. +set dummy objdump; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_OBJDUMP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OBJDUMP"; then + ac_cv_prog_ac_ct_OBJDUMP="$ac_ct_OBJDUMP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_OBJDUMP="objdump" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_OBJDUMP=$ac_cv_prog_ac_ct_OBJDUMP +if test -n "$ac_ct_OBJDUMP"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_OBJDUMP" >&5 +$as_echo "$ac_ct_OBJDUMP" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OBJDUMP" = x; then + OBJDUMP="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OBJDUMP=$ac_ct_OBJDUMP + fi +else + OBJDUMP="$ac_cv_prog_OBJDUMP" +fi + +test -z "$OBJDUMP" && OBJDUMP=objdump + + + + + + + + + +{ $as_echo "$as_me:$LINENO: checking how to recognize dependent libraries" >&5 +$as_echo_n "checking how to recognize dependent libraries... " >&6; } +if test "${lt_cv_deplibs_check_method+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# `unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# 'file_magic [[regex]]' -- check by looking for files in library path +# which responds to the $file_magic_cmd with a given extended regex. +# If you have `file' or equivalent on your system and you're not sure +# whether `pass_all' will *always* work, you probably want this one. + +case $host_os in +aix[4-9]*) + lt_cv_deplibs_check_method=pass_all + ;; + +beos*) + lt_cv_deplibs_check_method=pass_all + ;; + +bsdi[45]*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + +cygwin*) + # func_win32_libid is a shell function defined in ltmain.sh + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + ;; + +mingw* | pw32*) + # Base MSYS/MinGW do not provide the 'file' command needed by + # func_win32_libid shell function, so use a weaker test based on 'objdump', + # unless we find 'file', for example because we are cross-compiling. + if ( file / ) >/dev/null 2>&1; then + lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' + lt_cv_file_magic_cmd='func_win32_libid' + else + lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + fi + ;; + +cegcc) + # use the weaker test based on 'objdump'. See mingw*. + lt_cv_deplibs_check_method='file_magic file format pe-arm-.*little(.*architecture: arm)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method=pass_all + ;; + +freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + ;; + hppa*64*) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' + lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) + lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' + lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac + ;; + +interix[3-9]*) + # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' + ;; + +irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be Linux ELF. +linux* | k*bsd*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' + fi + ;; + +newos6*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +*nto* | *qnx*) + lt_cv_deplibs_check_method=pass_all + ;; + +openbsd*) + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' + else + lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + fi + ;; + +osf3* | osf4* | osf5*) + lt_cv_deplibs_check_method=pass_all + ;; + +rdos*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + +sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib" + lt_cv_file_magic_test_file=/lib/libc.so + ;; + siemens) + lt_cv_deplibs_check_method=pass_all + ;; + pc) + lt_cv_deplibs_check_method=pass_all + ;; + esac + ;; + +tpf*) + lt_cv_deplibs_check_method=pass_all + ;; +esac + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 +$as_echo "$lt_cv_deplibs_check_method" >&6; } +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown + + + + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. +set dummy ${ac_tool_prefix}ar; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_AR+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$AR"; then + ac_cv_prog_AR="$AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_AR="${ac_tool_prefix}ar" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +AR=$ac_cv_prog_AR +if test -n "$AR"; then + { $as_echo "$as_me:$LINENO: result: $AR" >&5 +$as_echo "$AR" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_AR"; then + ac_ct_AR=$AR + # Extract the first word of "ar", so it can be a program name with args. +set dummy ar; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_AR+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_AR"; then + ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_AR="ar" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_AR=$ac_cv_prog_ac_ct_AR +if test -n "$ac_ct_AR"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 +$as_echo "$ac_ct_AR" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_AR" = x; then + AR="false" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + AR=$ac_ct_AR + fi +else + AR="$ac_cv_prog_AR" +fi + +test -z "$AR" && AR=ar +test -z "$AR_FLAGS" && AR_FLAGS=cru + + + + + + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +set dummy ${ac_tool_prefix}strip; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_STRIP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_STRIP="${ac_tool_prefix}strip" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +STRIP=$ac_cv_prog_STRIP +if test -n "$STRIP"; then + { $as_echo "$as_me:$LINENO: result: $STRIP" >&5 +$as_echo "$STRIP" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_STRIP"; then + ac_ct_STRIP=$STRIP + # Extract the first word of "strip", so it can be a program name with args. +set dummy strip; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_STRIP"; then + ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_STRIP="strip" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +if test -n "$ac_ct_STRIP"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +$as_echo "$ac_ct_STRIP" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_STRIP" = x; then + STRIP=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + STRIP=$ac_ct_STRIP + fi +else + STRIP="$ac_cv_prog_STRIP" +fi + +test -z "$STRIP" && STRIP=: + + + + + + +if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_RANLIB+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$RANLIB"; then + ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +RANLIB=$ac_cv_prog_RANLIB +if test -n "$RANLIB"; then + { $as_echo "$as_me:$LINENO: result: $RANLIB" >&5 +$as_echo "$RANLIB" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_RANLIB"; then + ac_ct_RANLIB=$RANLIB + # Extract the first word of "ranlib", so it can be a program name with args. +set dummy ranlib; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_RANLIB"; then + ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_RANLIB="ranlib" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +if test -n "$ac_ct_RANLIB"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +$as_echo "$ac_ct_RANLIB" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_RANLIB" = x; then + RANLIB=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + RANLIB=$ac_ct_RANLIB + fi +else + RANLIB="$ac_cv_prog_RANLIB" +fi + +test -z "$RANLIB" && RANLIB=: + + + + + + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + case $host_os in + openbsd*) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" + ;; + *) + old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + + +# Check for command to grab the raw symbol name followed by C symbol from nm. +{ $as_echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 +$as_echo_n "checking command to parse $NM output from $compiler object... " >&6; } +if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then + $as_echo_n "(cached) " >&6 +else + +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +symcode='[BCDEGRST]' + +# Regexp to match symbols that can be accessed directly from C. +sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +# Define system-specific variables. +case $host_os in +aix*) + symcode='[BCDT]' + ;; +cygwin* | mingw* | pw32* | cegcc*) + symcode='[ABCDGISTW]' + ;; +hpux*) + if test "$host_cpu" = ia64; then + symcode='[ABCDEGRST]' + fi + ;; +irix* | nonstopux*) + symcode='[BCDEGRST]' + ;; +osf*) + symcode='[BCDEGQRST]' + ;; +solaris*) + symcode='[BDRT]' + ;; +sco3.2v5*) + symcode='[DT]' + ;; +sysv4.2uw2*) + symcode='[DT]' + ;; +sysv5* | sco5v6* | unixware* | OpenUNIX*) + symcode='[ABDT]' + ;; +sysv4) + symcode='[DFNSTU]' + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +case `$NM -V 2>&1` in +*GNU* | *'with BFD'*) + symcode='[ABCDGIRSTW]' ;; +esac + +# Transform an extracted symbol line into a proper C declaration. +# Some systems (esp. on ia64) link data and code symbols differently, +# so use this general approach. +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (void *) \&\2},/p'" +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (void *) 0},/p' -e 's/^$symcode* \([^ ]*\) \(lib[^ ]*\)$/ {\"\2\", (void *) \&\2},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"lib\2\", (void *) \&\2},/p'" + +# Handle CRLF in mingw tool chain +opt_cr= +case $build_os in +mingw*) + opt_cr=`$ECHO 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# Try without a prefix underscore, then with it. +for ac_symprfx in "" "_"; do + + # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. + symxfrm="\\1 $ac_symprfx\\2 \\2" + + # Write the raw and C identifiers. + if test "$lt_cv_nm_interface" = "MS dumpbin"; then + # Fake it for dumpbin and say T for any non-static function + # and D for any global variable. + # Also find C++ and __fastcall symbols from MSVC++, + # which start with @ or ?. + lt_cv_sys_global_symbol_pipe="$AWK '"\ +" {last_section=section; section=\$ 3};"\ +" /Section length .*#relocs.*(pick any)/{hide[last_section]=1};"\ +" \$ 0!~/External *\|/{next};"\ +" / 0+ UNDEF /{next}; / UNDEF \([^|]\)*()/{next};"\ +" {if(hide[section]) next};"\ +" {f=0}; \$ 0~/\(\).*\|/{f=1}; {printf f ? \"T \" : \"D \"};"\ +" {split(\$ 0, a, /\||\r/); split(a[2], s)};"\ +" s[1]~/^[@?]/{print s[1], s[1]; next};"\ +" s[1]~prfx {split(s[1],t,\"@\"); print t[1], substr(t[1],length(prfx))}"\ +" ' prfx=^$ac_symprfx" + else + lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + fi + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext <<_LT_EOF +#ifdef __cplusplus +extern "C" { +#endif +char nm_test_var; +void nm_test_func(void); +void nm_test_func(void){} +#ifdef __cplusplus +} +#endif +int main(){nm_test_var='a';nm_test_func();return(0);} +_LT_EOF + + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + # Now try to grab the symbols. + nlist=conftest.nm + if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 + (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if $GREP ' nm_test_var$' "$nlist" >/dev/null; then + if $GREP ' nm_test_func$' "$nlist" >/dev/null; then + cat <<_LT_EOF > conftest.$ac_ext +#ifdef __cplusplus +extern "C" { +#endif + +_LT_EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | $GREP -v main >> conftest.$ac_ext' + + cat <<_LT_EOF >> conftest.$ac_ext + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + void *address; +} +lt__PROGRAM__LTX_preloaded_symbols[] = +{ + { "@PROGRAM@", (void *) 0 }, +_LT_EOF + $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (void *) \&\2},/" < "$nlist" | $GREP -v main >> conftest.$ac_ext + cat <<\_LT_EOF >> conftest.$ac_ext + {0, (void *) 0} +}; + +/* This works around a problem in FreeBSD linker */ +#ifdef FREEBSD_WORKAROUND +static const void *lt_preloaded_setup() { + return lt__PROGRAM__LTX_preloaded_symbols; +} +#endif + +#ifdef __cplusplus +} +#endif +_LT_EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_save_LIBS="$LIBS" + lt_save_CFLAGS="$CFLAGS" + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS="$lt_save_LIBS" + CFLAGS="$lt_save_CFLAGS" + else + echo "cannot find nm_test_func in $nlist" >&5 + fi + else + echo "cannot find nm_test_var in $nlist" >&5 + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 + fi + else + echo "$progname: failed program was:" >&5 + cat conftest.$ac_ext >&5 + fi + rm -rf conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done + +fi + +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + { $as_echo "$as_me:$LINENO: result: failed" >&5 +$as_echo "failed" >&6; } +else + { $as_echo "$as_me:$LINENO: result: ok" >&5 +$as_echo "ok" >&6; } +fi + + + + + + + + + + + + + + + + + + + + + + + +# Check whether --enable-libtool-lock was given. +if test "${enable_libtool_lock+set}" = set; then + enableval=$enable_libtool_lock; +fi + +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +# Some flags need to be propagated to the compiler or linker for good +# libtool support. +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; +*-*-irix6*) + # Find out which ABI we are using. + echo '#line 5648 "configure"' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + if test "$lt_cv_prog_gnu_ld" = yes; then + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -melf32bsmip" + ;; + *N32*) + LD="${LD-ld} -melf32bmipn32" + ;; + *64-bit*) + LD="${LD-ld} -melf64bmip" + ;; + esac + else + case `/usr/bin/file conftest.$ac_objext` in + *32-bit*) + LD="${LD-ld} -32" + ;; + *N32*) + LD="${LD-ld} -n32" + ;; + *64-bit*) + LD="${LD-ld} -64" + ;; + esac + fi + fi + rm -rf conftest* + ;; + +x86_64-*kfreebsd*-gnu|x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*| \ +s390*-*linux*|s390*-*tpf*|sparc*-*linux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_i386_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_i386" + ;; + ppc64-*linux*|powerpc64-*linux*) + LD="${LD-ld} -m elf32ppclinux" + ;; + s390x-*linux*) + LD="${LD-ld} -m elf_s390" + ;; + sparc64-*linux*) + LD="${LD-ld} -m elf32_sparc" + ;; + esac + ;; + *64-bit*) + case $host in + x86_64-*kfreebsd*-gnu) + LD="${LD-ld} -m elf_x86_64_fbsd" + ;; + x86_64-*linux*) + LD="${LD-ld} -m elf_x86_64" + ;; + ppc*-*linux*|powerpc*-*linux*) + LD="${LD-ld} -m elf64ppc" + ;; + s390*-*linux*|s390*-*tpf*) + LD="${LD-ld} -m elf64_s390" + ;; + sparc*-*linux*) + LD="${LD-ld} -m elf64_sparc" + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; + +*-*-sco3.2v5*) + # On SCO OpenServer 5, we need -belf to get full-featured binaries. + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -belf" + { $as_echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 +$as_echo_n "checking whether the C compiler needs -belf... " >&6; } +if test "${lt_cv_cc_needs_belf+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + lt_cv_cc_needs_belf=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + lt_cv_cc_needs_belf=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 +$as_echo "$lt_cv_cc_needs_belf" >&6; } + if test x"$lt_cv_cc_needs_belf" != x"yes"; then + # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf + CFLAGS="$SAVE_CFLAGS" + fi + ;; +sparc*-*solaris*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then + case `/usr/bin/file conftest.o` in + *64-bit*) + case $lt_cv_prog_gnu_ld in + yes*) LD="${LD-ld} -m elf64_sparc" ;; + *) + if ${LD-ld} -64 -r -o conftest2.o conftest.o >/dev/null 2>&1; then + LD="${LD-ld} -64" + fi + ;; + esac + ;; + esac + fi + rm -rf conftest* + ;; +esac + +need_locks="$enable_libtool_lock" + + + case $host_os in + rhapsody* | darwin*) + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}dsymutil", so it can be a program name with args. +set dummy ${ac_tool_prefix}dsymutil; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_DSYMUTIL+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$DSYMUTIL"; then + ac_cv_prog_DSYMUTIL="$DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_DSYMUTIL="${ac_tool_prefix}dsymutil" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +DSYMUTIL=$ac_cv_prog_DSYMUTIL +if test -n "$DSYMUTIL"; then + { $as_echo "$as_me:$LINENO: result: $DSYMUTIL" >&5 +$as_echo "$DSYMUTIL" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_DSYMUTIL"; then + ac_ct_DSYMUTIL=$DSYMUTIL + # Extract the first word of "dsymutil", so it can be a program name with args. +set dummy dsymutil; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_DSYMUTIL+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_DSYMUTIL"; then + ac_cv_prog_ac_ct_DSYMUTIL="$ac_ct_DSYMUTIL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_DSYMUTIL="dsymutil" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_DSYMUTIL=$ac_cv_prog_ac_ct_DSYMUTIL +if test -n "$ac_ct_DSYMUTIL"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_DSYMUTIL" >&5 +$as_echo "$ac_ct_DSYMUTIL" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_DSYMUTIL" = x; then + DSYMUTIL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + DSYMUTIL=$ac_ct_DSYMUTIL + fi +else + DSYMUTIL="$ac_cv_prog_DSYMUTIL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}nmedit", so it can be a program name with args. +set dummy ${ac_tool_prefix}nmedit; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_NMEDIT+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$NMEDIT"; then + ac_cv_prog_NMEDIT="$NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_NMEDIT="${ac_tool_prefix}nmedit" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +NMEDIT=$ac_cv_prog_NMEDIT +if test -n "$NMEDIT"; then + { $as_echo "$as_me:$LINENO: result: $NMEDIT" >&5 +$as_echo "$NMEDIT" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_NMEDIT"; then + ac_ct_NMEDIT=$NMEDIT + # Extract the first word of "nmedit", so it can be a program name with args. +set dummy nmedit; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_NMEDIT+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_NMEDIT"; then + ac_cv_prog_ac_ct_NMEDIT="$ac_ct_NMEDIT" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_NMEDIT="nmedit" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_NMEDIT=$ac_cv_prog_ac_ct_NMEDIT +if test -n "$ac_ct_NMEDIT"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_NMEDIT" >&5 +$as_echo "$ac_ct_NMEDIT" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_NMEDIT" = x; then + NMEDIT=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + NMEDIT=$ac_ct_NMEDIT + fi +else + NMEDIT="$ac_cv_prog_NMEDIT" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}lipo", so it can be a program name with args. +set dummy ${ac_tool_prefix}lipo; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_LIPO+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$LIPO"; then + ac_cv_prog_LIPO="$LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_LIPO="${ac_tool_prefix}lipo" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +LIPO=$ac_cv_prog_LIPO +if test -n "$LIPO"; then + { $as_echo "$as_me:$LINENO: result: $LIPO" >&5 +$as_echo "$LIPO" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_LIPO"; then + ac_ct_LIPO=$LIPO + # Extract the first word of "lipo", so it can be a program name with args. +set dummy lipo; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_LIPO+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_LIPO"; then + ac_cv_prog_ac_ct_LIPO="$ac_ct_LIPO" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_LIPO="lipo" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_LIPO=$ac_cv_prog_ac_ct_LIPO +if test -n "$ac_ct_LIPO"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_LIPO" >&5 +$as_echo "$ac_ct_LIPO" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_LIPO" = x; then + LIPO=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + LIPO=$ac_ct_LIPO + fi +else + LIPO="$ac_cv_prog_LIPO" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_OTOOL+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$OTOOL"; then + ac_cv_prog_OTOOL="$OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_OTOOL="${ac_tool_prefix}otool" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +OTOOL=$ac_cv_prog_OTOOL +if test -n "$OTOOL"; then + { $as_echo "$as_me:$LINENO: result: $OTOOL" >&5 +$as_echo "$OTOOL" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OTOOL"; then + ac_ct_OTOOL=$OTOOL + # Extract the first word of "otool", so it can be a program name with args. +set dummy otool; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_OTOOL+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OTOOL"; then + ac_cv_prog_ac_ct_OTOOL="$ac_ct_OTOOL" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_OTOOL="otool" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_OTOOL=$ac_cv_prog_ac_ct_OTOOL +if test -n "$ac_ct_OTOOL"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_OTOOL" >&5 +$as_echo "$ac_ct_OTOOL" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OTOOL" = x; then + OTOOL=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL=$ac_ct_OTOOL + fi +else + OTOOL="$ac_cv_prog_OTOOL" +fi + + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}otool64", so it can be a program name with args. +set dummy ${ac_tool_prefix}otool64; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_OTOOL64+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$OTOOL64"; then + ac_cv_prog_OTOOL64="$OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_OTOOL64="${ac_tool_prefix}otool64" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +OTOOL64=$ac_cv_prog_OTOOL64 +if test -n "$OTOOL64"; then + { $as_echo "$as_me:$LINENO: result: $OTOOL64" >&5 +$as_echo "$OTOOL64" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + +fi +if test -z "$ac_cv_prog_OTOOL64"; then + ac_ct_OTOOL64=$OTOOL64 + # Extract the first word of "otool64", so it can be a program name with args. +set dummy otool64; ac_word=$2 +{ $as_echo "$as_me:$LINENO: checking for $ac_word" >&5 +$as_echo_n "checking for $ac_word... " >&6; } +if test "${ac_cv_prog_ac_ct_OTOOL64+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test -n "$ac_ct_OTOOL64"; then + ac_cv_prog_ac_ct_OTOOL64="$ac_ct_OTOOL64" # Let the user override the test. +else +as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do + if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_OTOOL64="otool64" + $as_echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi +done +done +IFS=$as_save_IFS + +fi +fi +ac_ct_OTOOL64=$ac_cv_prog_ac_ct_OTOOL64 +if test -n "$ac_ct_OTOOL64"; then + { $as_echo "$as_me:$LINENO: result: $ac_ct_OTOOL64" >&5 +$as_echo "$ac_ct_OTOOL64" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + if test "x$ac_ct_OTOOL64" = x; then + OTOOL64=":" + else + case $cross_compiling:$ac_tool_warned in +yes:) +{ $as_echo "$as_me:$LINENO: WARNING: using cross tools not prefixed with host triplet" >&5 +$as_echo "$as_me: WARNING: using cross tools not prefixed with host triplet" >&2;} +ac_tool_warned=yes ;; +esac + OTOOL64=$ac_ct_OTOOL64 + fi +else + OTOOL64="$ac_cv_prog_OTOOL64" +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:$LINENO: checking for -single_module linker flag" >&5 +$as_echo_n "checking for -single_module linker flag... " >&6; } +if test "${lt_cv_apple_cc_single_mod+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_apple_cc_single_mod=no + if test -z "${LT_MULTI_MODULE}"; then + # By default we will add the -single_module flag. You can override + # by either setting the environment variable LT_MULTI_MODULE + # non-empty at configure time, or by adding -multi_module to the + # link flags. + rm -rf libconftest.dylib* + echo "int foo(void){return 1;}" > conftest.c + echo "$LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ +-dynamiclib -Wl,-single_module conftest.c" >&5 + $LTCC $LTCFLAGS $LDFLAGS -o libconftest.dylib \ + -dynamiclib -Wl,-single_module conftest.c 2>conftest.err + _lt_result=$? + if test -f libconftest.dylib && test ! -s conftest.err && test $_lt_result = 0; then + lt_cv_apple_cc_single_mod=yes + else + cat conftest.err >&5 + fi + rm -rf libconftest.dylib* + rm -f conftest.* + fi +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_apple_cc_single_mod" >&5 +$as_echo "$lt_cv_apple_cc_single_mod" >&6; } + { $as_echo "$as_me:$LINENO: checking for -exported_symbols_list linker flag" >&5 +$as_echo_n "checking for -exported_symbols_list linker flag... " >&6; } +if test "${lt_cv_ld_exported_symbols_list+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_ld_exported_symbols_list=no + save_LDFLAGS=$LDFLAGS + echo "_main" > conftest.sym + LDFLAGS="$LDFLAGS -Wl,-exported_symbols_list,conftest.sym" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + lt_cv_ld_exported_symbols_list=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + lt_cv_ld_exported_symbols_list=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_ld_exported_symbols_list" >&5 +$as_echo "$lt_cv_ld_exported_symbols_list" >&6; } + case $host_os in + rhapsody* | darwin1.[012]) + _lt_dar_allow_undefined='${wl}-undefined ${wl}suppress' ;; + darwin1.*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + darwin*) # darwin 5.x on + # if running on 10.5 or later, the deployment target defaults + # to the OS version, if on x86, and 10.4, the deployment + # target defaults to 10.4. Don't you love it? + case ${MACOSX_DEPLOYMENT_TARGET-10.0},$host in + 10.0,*86*-darwin8*|10.0,*-darwin[91]*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + 10.[012]*) + _lt_dar_allow_undefined='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ;; + 10.*) + _lt_dar_allow_undefined='${wl}-undefined ${wl}dynamic_lookup' ;; + esac + ;; + esac + if test "$lt_cv_apple_cc_single_mod" = "yes"; then + _lt_dar_single_mod='$single_module' + fi + if test "$lt_cv_ld_exported_symbols_list" = "yes"; then + _lt_dar_export_syms=' ${wl}-exported_symbols_list,$output_objdir/${libname}-symbols.expsym' + else + _lt_dar_export_syms='~$NMEDIT -s $output_objdir/${libname}-symbols.expsym ${lib}' + fi + if test "$DSYMUTIL" != ":"; then + _lt_dsymutil='~$DSYMUTIL $lib || :' + else + _lt_dsymutil= + fi + ;; + esac + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu +{ $as_echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +$as_echo_n "checking how to run the C preprocessor... " >&6; } +# On Suns, sometimes $CPP names a directory. +if test -n "$CPP" && test -d "$CPP"; then + CPP= +fi +if test -z "$CPP"; then + if test "${ac_cv_prog_CPP+set}" = set; then + $as_echo_n "(cached) " >&6 +else + # Double quotes because CPP needs to be expanded + for CPP in "$CC -E" "$CC -E -traditional-cpp" "/lib/cpp" + do + ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + # <limits.h> exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + Syntax error +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + : +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi + +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <ac_nonexistent.h> +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + # Broken: success on invalid input. +continue +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi + +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + break +fi + + done + ac_cv_prog_CPP=$CPP + +fi + CPP=$ac_cv_prog_CPP +else + ac_cv_prog_CPP=$CPP +fi +{ $as_echo "$as_me:$LINENO: result: $CPP" >&5 +$as_echo "$CPP" >&6; } +ac_preproc_ok=false +for ac_c_preproc_warn_flag in '' yes +do + # Use a header file that comes with gcc, so configuring glibc + # with a fresh cross-compiler works. + # Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + # <limits.h> exists even on freestanding compilers. + # On the NeXT, cc -E runs the code through the compiler's parser, + # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + Syntax error +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + : +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Broken: fails on valid input. +continue +fi + +rm -f conftest.err conftest.$ac_ext + + # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <ac_nonexistent.h> +_ACEOF +if { (ac_try="$ac_cpp conftest.$ac_ext" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } >/dev/null && { + test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || + test ! -s conftest.err + }; then + # Broken: success on invalid input. +continue +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + # Passes both tests. +ac_preproc_ok=: +break +fi + +rm -f conftest.err conftest.$ac_ext + +done +# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. +rm -f conftest.err conftest.$ac_ext +if $ac_preproc_ok; then + : +else + { { $as_echo "$as_me:$LINENO: error: in \`$ac_pwd':" >&5 +$as_echo "$as_me: error: in \`$ac_pwd':" >&2;} +{ { $as_echo "$as_me:$LINENO: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&5 +$as_echo "$as_me: error: C preprocessor \"$CPP\" fails sanity check +See \`config.log' for more details." >&2;} + { (exit 1); exit 1; }; }; } +fi + +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +{ $as_echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +$as_echo_n "checking for ANSI C header files... " >&6; } +if test "${ac_cv_header_stdc+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <stdlib.h> +#include <stdarg.h> +#include <string.h> +#include <float.h> + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + ac_cv_header_stdc=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_header_stdc=no +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <string.h> + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "memchr" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <stdlib.h> + +_ACEOF +if (eval "$ac_cpp conftest.$ac_ext") 2>&5 | + $EGREP "free" >/dev/null 2>&1; then + : +else + ac_cv_header_stdc=no +fi +rm -f conftest* + +fi + +if test $ac_cv_header_stdc = yes; then + # /bin/cc in Irix-4.0.5 gets non-ANSI ctype macros unless using -ansi. + if test "$cross_compiling" = yes; then + : +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +#include <ctype.h> +#include <stdlib.h> +#if ((' ' & 0x0FF) == 0x020) +# define ISLOWER(c) ('a' <= (c) && (c) <= 'z') +# define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +#else +# define ISLOWER(c) \ + (('a' <= (c) && (c) <= 'i') \ + || ('j' <= (c) && (c) <= 'r') \ + || ('s' <= (c) && (c) <= 'z')) +# define TOUPPER(c) (ISLOWER(c) ? ((c) | 0x40) : (c)) +#endif + +#define XOR(e, f) (((e) && !(f)) || (!(e) && (f))) +int +main () +{ + int i; + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) + return 2; + return 0; +} +_ACEOF +rm -f conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' + { (case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_try") 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then + : +else + $as_echo "$as_me: program exited with status $ac_status" >&5 +$as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + +( exit $ac_status ) +ac_cv_header_stdc=no +fi +rm -rf conftest.dSYM +rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext +fi + + +fi +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +$as_echo "$ac_cv_header_stdc" >&6; } +if test $ac_cv_header_stdc = yes; then + +cat >>confdefs.h <<\_ACEOF +#define STDC_HEADERS 1 +_ACEOF + +fi + +# On IRIX 5.3, sys/types and inttypes.h are conflicting. + + + + + + + + + +for ac_header in sys/types.h sys/stat.h stdlib.h string.h memory.h strings.h \ + inttypes.h stdint.h unistd.h +do +as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +$as_echo_n "checking for $ac_header... " >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default + +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + eval "$as_ac_Header=yes" +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_Header=no" +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +ac_res=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +as_val=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + if test "x$as_val" = x""yes; then + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + +for ac_header in dlfcn.h +do +as_ac_Header=`$as_echo "ac_cv_header_$ac_header" | $as_tr_sh` +{ $as_echo "$as_me:$LINENO: checking for $ac_header" >&5 +$as_echo_n "checking for $ac_header... " >&6; } +if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +$ac_includes_default + +#include <$ac_header> +_ACEOF +rm -f conftest.$ac_objext +if { (ac_try="$ac_compile" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest.$ac_objext; then + eval "$as_ac_Header=yes" +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + eval "$as_ac_Header=no" +fi + +rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext +fi +ac_res=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + { $as_echo "$as_me:$LINENO: result: $ac_res" >&5 +$as_echo "$ac_res" >&6; } +as_val=`eval 'as_val=${'$as_ac_Header'} + $as_echo "$as_val"'` + if test "x$as_val" = x""yes; then + cat >>confdefs.h <<_ACEOF +#define `$as_echo "HAVE_$ac_header" | $as_tr_cpp` 1 +_ACEOF + +fi + +done + + + +# Set options + + + + enable_dlopen=no + + + enable_win32_dll=no + + + # Check whether --enable-shared was given. +if test "${enable_shared+set}" = set; then + enableval=$enable_shared; p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_shared=yes +fi + + + + + + + + + + # Check whether --enable-static was given. +if test "${enable_static+set}" = set; then + enableval=$enable_static; p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_static=yes +fi + + + + + + + + + + +# Check whether --with-pic was given. +if test "${with_pic+set}" = set; then + withval=$with_pic; pic_mode="$withval" +else + pic_mode=default +fi + + +test -z "$pic_mode" && pic_mode=default + + + + + + + + # Check whether --enable-fast-install was given. +if test "${enable_fast_install+set}" = set; then + enableval=$enable_fast_install; p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac +else + enable_fast_install=yes +fi + + + + + + + + + + + +# This can be used to rebuild libtool when needed +LIBTOOL_DEPS="$ltmain" + +# Always use our own libtool. +LIBTOOL='$(SHELL) $(top_builddir)/libtool' + + + + + + + + + + + + + + + + + + + + + + + + + +test -z "$LN_S" && LN_S="ln -s" + + + + + + + + + + + + + + +if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + +{ $as_echo "$as_me:$LINENO: checking for objdir" >&5 +$as_echo_n "checking for objdir... " >&6; } +if test "${lt_cv_objdir+set}" = set; then + $as_echo_n "(cached) " >&6 +else + rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 +$as_echo "$lt_cv_objdir" >&6; } +objdir=$lt_cv_objdir + + + + + +cat >>confdefs.h <<_ACEOF +#define LT_OBJDIR "$lt_cv_objdir/" +_ACEOF + + + + + + + + + + + + + + + + + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +sed_quote_subst='s/\(["`$\\]\)/\\\1/g' + +# Same as above, but do not quote variable references. +double_quote_subst='s/\(["`\\]\)/\\\1/g' + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to delay expansion of an escaped single quote. +delay_single_quote_subst='s/'\''/'\'\\\\\\\'\''/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + +# Global variables: +ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except MSVC, +# which needs '.lib'). +libext=a + +with_gnu_ld="$lt_cv_prog_gnu_ld" + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS +test -z "$LD" && LD=ld +test -z "$ac_objext" && ac_objext=o + +for cc_temp in $compiler""; do + case $cc_temp in + compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; + distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; + \-*) ;; + *) break;; + esac +done +cc_basename=`$ECHO "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + + +# Only perform the check for file, if the check method requires it +test -z "$MAGIC_CMD" && MAGIC_CMD=file +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + { $as_echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 +$as_echo_n "checking for ${ac_tool_prefix}file... " >&6; } +if test "${lt_cv_path_MAGIC_CMD+set}" = set; then + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/${ac_tool_prefix}file; then + lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + + + + +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + { $as_echo "$as_me:$LINENO: checking for file" >&5 +$as_echo_n "checking for file... " >&6; } +if test "${lt_cv_path_MAGIC_CMD+set}" = set; then + $as_echo_n "(cached) " >&6 +else + case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/file; then + lt_cv_path_MAGIC_CMD="$ac_dir/file" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then + : + else + cat <<_LT_EOF 1>&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +_LT_EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac +fi + +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + { $as_echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +$as_echo "$MAGIC_CMD" >&6; } +else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } +fi + + + else + MAGIC_CMD=: + fi +fi + + fi + ;; +esac + +# Use C for the default configuration in the libtool script + +lt_save_CC="$CC" +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +objext=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(){return(0);}' + + + + + + + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# If no C compiler flags were specified, use CFLAGS. +LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + +# Allow CC to be a program name with arguments. +compiler=$CC + +# Save the default compiler, since it gets overwritten when the other +# tags are being tested, and _LT_TAGVAR(compiler, []) is a NOP. +compiler_DEFAULT=$CC + +# save warnings/boilerplate of simple test code +ac_outfile=conftest.$ac_objext +echo "$lt_simple_compile_test_code" >conftest.$ac_ext +eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_compiler_boilerplate=`cat conftest.err` +$RM conftest* + +ac_outfile=conftest.$ac_objext +echo "$lt_simple_link_test_code" >conftest.$ac_ext +eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err +_lt_linker_boilerplate=`cat conftest.err` +$RM -r conftest* + + +## CAVEAT EMPTOR: +## There is no encapsulation within the following macros, do not change +## the running order or otherwise move them around unless you know exactly +## what you are doing... +if test -n "$compiler"; then + +lt_prog_compiler_no_builtin_flag= + +if test "$GCC" = yes; then + lt_prog_compiler_no_builtin_flag=' -fno-builtin' + + { $as_echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +$as_echo_n "checking if $compiler supports -fno-rtti -fno-exceptions... " >&6; } +if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_rtti_exceptions=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="-fno-rtti -fno-exceptions" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:7505: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:7509: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_rtti_exceptions=yes + fi + fi + $RM conftest* + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 +$as_echo "$lt_cv_prog_compiler_rtti_exceptions" >&6; } + +if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then + lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" +else + : +fi + +fi + + + + + + + lt_prog_compiler_wl= +lt_prog_compiler_pic= +lt_prog_compiler_static= + +{ $as_echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +$as_echo_n "checking for $compiler option to produce PIC... " >&6; } + + if test "$GCC" = yes; then + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_static='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + lt_prog_compiler_pic='-fPIC' + ;; + m68k) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' + ;; + esac + ;; + + beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + # Although the cygwin gcc ignores -fPIC, still need this for old-style + # (--disable-auto-import) libraries + lt_prog_compiler_pic='-DDLL_EXPORT' + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + lt_prog_compiler_pic='-fno-common' + ;; + + hpux*) + # PIC is the default for 64-bit PA HP-UX, but not for 32-bit + # PA HP-UX. On IA64 HP-UX, PIC is the default but the pic flag + # sets the default TLS model and affects inlining. + case $host_cpu in + hppa*64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + ;; + + interix[3-9]*) + # Interix 3.x gcc -fpic/-fPIC options generate broken code. + # Instead, we relocate shared libraries at runtime. + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + lt_prog_compiler_can_build_shared=no + enable_shared=no + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + lt_prog_compiler_pic=-Kconform_pic + fi + ;; + + *) + lt_prog_compiler_pic='-fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + lt_prog_compiler_wl='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + lt_prog_compiler_static='-Bstatic' + else + lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + mingw* | cygwin* | pw32* | os2* | cegcc*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + lt_prog_compiler_pic='-DDLL_EXPORT' + ;; + + hpux9* | hpux10* | hpux11*) + lt_prog_compiler_wl='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. + case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; + *) + lt_prog_compiler_pic='+Z' + ;; + esac + # Is there a better lt_prog_compiler_static that works with the bundled CC? + lt_prog_compiler_static='${wl}-a ${wl}archive' + ;; + + irix5* | irix6* | nonstopux*) + lt_prog_compiler_wl='-Wl,' + # PIC (with -KPIC) is the default. + lt_prog_compiler_static='-non_shared' + ;; + + linux* | k*bsd*-gnu) + case $cc_basename in + # old Intel for x86_64 which still supported -KPIC. + ecc*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-static' + ;; + # icc used to be incompatible with GCC. + # ICC 10 doesn't accept -KPIC any more. + icc* | ifort*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fPIC' + lt_prog_compiler_static='-static' + ;; + # Lahey Fortran 8.1. + lf95*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='--shared' + lt_prog_compiler_static='--static' + ;; + pgcc* | pgf77* | pgf90* | pgf95*) + # Portland Group compilers (*not* the Pentium gcc compiler, + # which looks to be a dead project) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-fpic' + lt_prog_compiler_static='-Bstatic' + ;; + ccc*) + lt_prog_compiler_wl='-Wl,' + # All Alpha code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + xl*) + # IBM XL C 8.0/Fortran 10.1 on PPC + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-qpic' + lt_prog_compiler_static='-qstaticlink' + ;; + *) + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) + # Sun C 5.9 + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='-Wl,' + ;; + *Sun\ F*) + # Sun Fortran 8.3 passes all unrecognized flags to the linker + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + lt_prog_compiler_wl='' + ;; + esac + ;; + esac + ;; + + newsos6) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + *nto* | *qnx*) + # QNX uses GNU C++, but need to define -shared option too, otherwise + # it will coredump. + lt_prog_compiler_pic='-fPIC -shared' + ;; + + osf3* | osf4* | osf5*) + lt_prog_compiler_wl='-Wl,' + # All OSF/1 code is PIC. + lt_prog_compiler_static='-non_shared' + ;; + + rdos*) + lt_prog_compiler_static='-non_shared' + ;; + + solaris*) + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + case $cc_basename in + f77* | f90* | f95*) + lt_prog_compiler_wl='-Qoption ld ';; + *) + lt_prog_compiler_wl='-Wl,';; + esac + ;; + + sunos4*) + lt_prog_compiler_wl='-Qoption ld ' + lt_prog_compiler_pic='-PIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + lt_prog_compiler_pic='-Kconform_pic' + lt_prog_compiler_static='-Bstatic' + fi + ;; + + sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_pic='-KPIC' + lt_prog_compiler_static='-Bstatic' + ;; + + unicos*) + lt_prog_compiler_wl='-Wl,' + lt_prog_compiler_can_build_shared=no + ;; + + uts4*) + lt_prog_compiler_pic='-pic' + lt_prog_compiler_static='-Bstatic' + ;; + + *) + lt_prog_compiler_can_build_shared=no + ;; + esac + fi + +case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + lt_prog_compiler_pic= + ;; + *) + lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" + ;; +esac +{ $as_echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 +$as_echo "$lt_prog_compiler_pic" >&6; } + + + + + + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$lt_prog_compiler_pic"; then + { $as_echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 +$as_echo_n "checking if $compiler PIC flag $lt_prog_compiler_pic works... " >&6; } +if test "${lt_cv_prog_compiler_pic_works+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_pic_works=no + ac_outfile=conftest.$ac_objext + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + lt_compiler_flag="$lt_prog_compiler_pic -DPIC" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:7844: $lt_compile\"" >&5) + (eval "$lt_compile" 2>conftest.err) + ac_status=$? + cat conftest.err >&5 + echo "$as_me:7848: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings other than the usual output. + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_pic_works=yes + fi + fi + $RM conftest* + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_pic_works" >&5 +$as_echo "$lt_cv_prog_compiler_pic_works" >&6; } + +if test x"$lt_cv_prog_compiler_pic_works" = xyes; then + case $lt_prog_compiler_pic in + "" | " "*) ;; + *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; + esac +else + lt_prog_compiler_pic= + lt_prog_compiler_can_build_shared=no +fi + +fi + + + + + + +# +# Check to make sure the static flag actually works. +# +wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" +{ $as_echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 +$as_echo_n "checking if $compiler static flag $lt_tmp_static_flag works... " >&6; } +if test "${lt_cv_prog_compiler_static_works+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_static_works=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $lt_tmp_static_flag" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&5 + $ECHO "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp + $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 + if diff conftest.exp conftest.er2 >/dev/null; then + lt_cv_prog_compiler_static_works=yes + fi + else + lt_cv_prog_compiler_static_works=yes + fi + fi + $RM -r conftest* + LDFLAGS="$save_LDFLAGS" + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_static_works" >&5 +$as_echo "$lt_cv_prog_compiler_static_works" >&6; } + +if test x"$lt_cv_prog_compiler_static_works" = xyes; then + : +else + lt_prog_compiler_static= +fi + + + + + + + + { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if test "${lt_cv_prog_compiler_c_o+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:7949: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:7953: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } + + + + + + + { $as_echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +$as_echo_n "checking if $compiler supports -c -o file.$ac_objext... " >&6; } +if test "${lt_cv_prog_compiler_c_o+set}" = set; then + $as_echo_n "(cached) " >&6 +else + lt_cv_prog_compiler_c_o=no + $RM -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + lt_compiler_flag="-o out/conftest2.$ac_objext" + # Insert the option either (1) after the last *FLAGS variable, or + # (2) before a word containing "conftest.", or (3) at the end. + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ + -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:8004: $lt_compile\"" >&5) + (eval "$lt_compile" 2>out/conftest.err) + ac_status=$? + cat out/conftest.err >&5 + echo "$as_me:8008: \$? = $ac_status" >&5 + if (exit $ac_status) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + $ECHO "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp + $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 + if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + lt_cv_prog_compiler_c_o=yes + fi + fi + chmod u+w . 2>&5 + $RM conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation + test -d out/ii_files && $RM out/ii_files/* && rmdir out/ii_files + $RM out/* && rmdir out + cd .. + $RM -r conftest + $RM conftest* + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 +$as_echo "$lt_cv_prog_compiler_c_o" >&6; } + + + + +hard_links="nottested" +if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + { $as_echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +$as_echo_n "checking if we can lock with hard links... " >&6; } + hard_links=yes + $RM conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + { $as_echo "$as_me:$LINENO: result: $hard_links" >&5 +$as_echo "$hard_links" >&6; } + if test "$hard_links" = no; then + { $as_echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +$as_echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} + need_locks=warn + fi +else + need_locks=no +fi + + + + + + + { $as_echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 +$as_echo_n "checking whether the $compiler linker ($LD) supports shared libraries... " >&6; } + + runpath_var= + allow_undefined_flag= + always_export_symbols=no + archive_cmds= + archive_expsym_cmds= + compiler_needs_object=no + enable_shared_with_static_runtimes=no + export_dynamic_flag_spec= + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' + hardcode_automatic=no + hardcode_direct=no + hardcode_direct_absolute=no + hardcode_libdir_flag_spec= + hardcode_libdir_flag_spec_ld= + hardcode_libdir_separator= + hardcode_minus_L=no + hardcode_shlibpath_var=unsupported + inherit_rpath=no + link_all_deplibs=unknown + module_cmds= + module_expsym_cmds= + old_archive_from_new_cmds= + old_archive_from_expsyms_cmds= + thread_safe_flag_spec= + whole_archive_flag_spec= + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + include_expsyms= + # exclude_expsyms can be an extended regexp of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + exclude_expsyms='_GLOBAL_OFFSET_TABLE_|_GLOBAL__F[ID]_.*' + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + # Exclude shared library initialization/finalization symbols. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32* | cegcc*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + interix*) + # we just hope/assume this is gcc and not c89 (= MSVC++) + with_gnu_ld=yes + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + ld_shlibs=yes + if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # Set some defaults for GNU ld with shared library support. These + # are reset later if shared libraries are not supported. Putting them + # here allows them to be overridden if necessary. + runpath_var=LD_RUN_PATH + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + export_dynamic_flag_spec='${wl}--export-dynamic' + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | $GREP 'no-whole-archive' > /dev/null; then + whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + whole_archive_flag_spec= + fi + supports_anon_versioning=no + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 + *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... + *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... + *\ 2.11.*) ;; # other 2.11 versions + *) supports_anon_versioning=yes ;; + esac + + # See if GNU ld supports shared libraries. + case $host_os in + aix[3-9]*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. + +_LT_EOF + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + + beos*) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + allow_undefined_flag=unsupported + # Joseph Beckenbach <jrb3@best.com> says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + ld_shlibs=no + fi + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # _LT_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, + # as there is no search path for DLLs. + hardcode_libdir_flag_spec='-L$libdir' + allow_undefined_flag=unsupported + always_export_symbols=no + enable_shared_with_static_runtimes=yes + export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS][ ]/s/.*[ ]\([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW][ ]/s/.*[ ]//'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | $GREP 'auto-import' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname.def; + else + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ + $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + ld_shlibs=no + fi + ;; + + interix[3-9]*) + hardcode_direct=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. + # Instead, shared libraries are loaded at an image base (0x10000000 by + # default) and relocated if they conflict, which is a slow very memory + # consuming and fragmenting process. To avoid this, we pick a random, + # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link + # time. Moving up from 0x10000000 also allows more sbrk(2) space. + archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' + ;; + + gnu* | linux* | tpf* | k*bsd*-gnu) + tmp_diet=no + if test "$host_os" = linux-dietlibc; then + case $cc_basename in + diet\ *) tmp_diet=yes;; # linux-dietlibc with static linking (!diet-dyn) + esac + fi + if $LD --help 2>&1 | $EGREP ': supported targets:.* elf' > /dev/null \ + && test "$tmp_diet" = no + then + tmp_addflag= + tmp_sharedflag='-shared' + case $cc_basename,$host_cpu in + pgcc*) # Portland Group C compiler + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag' + ;; + pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers + whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' + tmp_addflag=' $pic_flag -Mnomain' ;; + ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 + tmp_addflag=' -i_dynamic' ;; + efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 + tmp_addflag=' -i_dynamic -nofor_main' ;; + ifc* | ifort*) # Intel Fortran compiler + tmp_addflag=' -nofor_main' ;; + lf95*) # Lahey Fortran 8.1 + whole_archive_flag_spec= + tmp_sharedflag='--shared' ;; + xl[cC]*) # IBM XL C 8.0 on PPC (deal with xlf below) + tmp_sharedflag='-qmkshrobj' + tmp_addflag= ;; + esac + case `$CC -V 2>&1 | sed 5q` in + *Sun\ C*) # Sun C 5.9 + whole_archive_flag_spec='${wl}--whole-archive`new_convenience=; for conv in $convenience\"\"; do test -z \"$conv\" || new_convenience=\"$new_convenience,$conv\"; done; $ECHO \"$new_convenience\"` ${wl}--no-whole-archive' + compiler_needs_object=yes + tmp_sharedflag='-G' ;; + *Sun\ F*) # Sun Fortran 8.3 + tmp_sharedflag='-G' ;; + esac + archive_cmds='$CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $CC '"$tmp_sharedflag""$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' + fi + + case $cc_basename in + xlf*) + # IBM XL Fortran 10.1 on PPC cannot create shared libs itself + whole_archive_flag_spec='--whole-archive$convenience --no-whole-archive' + hardcode_libdir_flag_spec= + hardcode_libdir_flag_spec_ld='-rpath $libdir' + archive_cmds='$LD -shared $libobjs $deplibs $compiler_flags -soname $soname -o $lib' + if test "x$supports_anon_versioning" = xyes; then + archive_expsym_cmds='echo "{ global:" > $output_objdir/$libname.ver~ + cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ + echo "local: *; };" >> $output_objdir/$libname.ver~ + $LD -shared $libobjs $deplibs $compiler_flags -soname $soname -version-script $output_objdir/$libname.ver -o $lib' + fi + ;; + esac + else + ld_shlibs=no + fi + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris*) + if $LD -v 2>&1 | $GREP 'BFD 2\.8' > /dev/null; then + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + elif $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + + sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) + case `$LD -v 2>&1` in + *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) + ld_shlibs=no + cat <<_LT_EOF 1>&2 + +*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not +*** reliably create shared libraries on SCO systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.16.91.0.3 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +_LT_EOF + ;; + *) + # For security reasons, it is highly recommended that you always + # use absolute paths for naming shared libraries, and exclude the + # DT_RUNPATH tag from executables and libraries. But doing so + # requires that you compile everything twice, which is a pain. + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + ;; + + sunos4*) + archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + *) + if $LD --help 2>&1 | $GREP ': supported targets:.* elf' > /dev/null; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + ld_shlibs=no + fi + ;; + esac + + if test "$ld_shlibs" = no; then + runpath_var= + hardcode_libdir_flag_spec= + export_dynamic_flag_spec= + whole_archive_flag_spec= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + allow_undefined_flag=unsupported + always_export_symbols=yes + archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + hardcode_minus_L=yes + if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + hardcode_direct=unsupported + fi + ;; + + aix[4-9]*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + # If we're using GNU nm, then we don't want the "-C" option. + # -C means demangle to AIX nm, but means don't demangle with GNU nm + if $NM -V 2>&1 | $GREP 'GNU' > /dev/null; then + export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + else + export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$ 2 == "T") || (\$ 2 == "D") || (\$ 2 == "B")) && (substr(\$ 3,1,1) != ".")) { print \$ 3 } }'\'' | sort -u > $export_symbols' + fi + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[23]|aix4.[23].*|aix[5-9]*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + ;; + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + archive_cmds='' + hardcode_direct=yes + hardcode_direct_absolute=yes + hardcode_libdir_separator=':' + link_all_deplibs=yes + file_list_spec='${wl}-f,' + + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && + strings "$collect2name" | $GREP resolve_lib_name >/dev/null + then + # We have reworked collect2 + : + else + # We have old collect2 + hardcode_direct=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + hardcode_minus_L=yes + hardcode_libdir_flag_spec='-L$libdir' + hardcode_libdir_separator= + fi + ;; + esac + shared_flag='-shared' + if test "$aix_use_runtimelinking" = yes; then + shared_flag="$shared_flag "'${wl}-G' + fi + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + export_dynamic_flag_spec='${wl}-bexpall' + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + always_export_symbols=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + allow_undefined_flag='-berok' + # Determine the default libpath from the value encoded in an + # empty executable. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +fi +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + archive_expsym_cmds='$CC -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then $ECHO "X${wl}${allow_undefined_flag}" | $Xsed; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' + allow_undefined_flag="-z nodefs" + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an + # empty executable. + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + +lt_aix_libpath_sed=' + /Import File Strings/,/^$/ { + /^0/ { + s/^0 *\(.*\)$/\1/ + p + } + }' +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then + aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e "$lt_aix_libpath_sed"` +fi +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi + + hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + no_undefined_flag=' ${wl}-bernotok' + allow_undefined_flag=' ${wl}-berok' + # Exported symbols can be pulled into shared objects from archives + whole_archive_flag_spec='$convenience' + archive_cmds_need_lc=yes + # This is similar to how AIX traditionally builds its shared libraries. + archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + case $host_cpu in + powerpc) + # see comment about AmigaOS4 .so support + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + archive_expsym_cmds='' + ;; + m68k) + archive_cmds='$RM $output_objdir/a2ixlibrary.data~$ECHO "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$ECHO "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$ECHO "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$ECHO "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + ;; + esac + ;; + + bsdi[45]*) + export_dynamic_flag_spec=-rdynamic + ;; + + cygwin* | mingw* | pw32* | cegcc*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + hardcode_libdir_flag_spec=' ' + allow_undefined_flag=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # Tell ltmain to make .dll files, not .so files. + shrext_cmds=".dll" + # FIXME: Setting linknames here is a bad hack. + archive_cmds='$CC -o $lib $libobjs $compiler_flags `$ECHO "X$deplibs" | $Xsed -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + old_archive_from_new_cmds='true' + # FIXME: Should let the user specify the lib program. + old_archive_cmds='lib -OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path='`cygpath -w "$srcfile"`' + enable_shared_with_static_runtimes=yes + ;; + + darwin* | rhapsody*) + + + archive_cmds_need_lc=no + hardcode_direct=no + hardcode_automatic=yes + hardcode_shlibpath_var=unsupported + whole_archive_flag_spec='' + link_all_deplibs=yes + allow_undefined_flag="$_lt_dar_allow_undefined" + case $cc_basename in + ifort*) _lt_dar_can_shared=yes ;; + *) _lt_dar_can_shared=$GCC ;; + esac + if test "$_lt_dar_can_shared" = "yes"; then + output_verbose_link_cmd=echo + archive_cmds="\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring $_lt_dar_single_mod${_lt_dsymutil}" + module_cmds="\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dsymutil}" + archive_expsym_cmds="sed 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC -dynamiclib \$allow_undefined_flag -o \$lib \$libobjs \$deplibs \$compiler_flags -install_name \$rpath/\$soname \$verstring ${_lt_dar_single_mod}${_lt_dar_export_syms}${_lt_dsymutil}" + module_expsym_cmds="sed -e 's,^,_,' < \$export_symbols > \$output_objdir/\${libname}-symbols.expsym~\$CC \$allow_undefined_flag -o \$lib -bundle \$libobjs \$deplibs \$compiler_flags${_lt_dar_export_syms}${_lt_dsymutil}" + + else + ld_shlibs=no + fi + + ;; + + dgux*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + freebsd1*) + ld_shlibs=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd* | dragonfly*) + archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + hpux9*) + if test "$GCC" = yes; then + archive_cmds='$RM $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + else + archive_cmds='$RM $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + fi + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + export_dynamic_flag_spec='${wl}-E' + ;; + + hpux10*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_flag_spec_ld='+b $libdir' + hardcode_libdir_separator=: + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='${wl}-E' + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + fi + ;; + + hpux11*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then + case $host_cpu in + hppa*64*) + archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else + case $host_cpu in + hppa*64*) + archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; + ia64*) + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) + archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + fi + if test "$with_gnu_ld" = no; then + hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' + hardcode_libdir_separator=: + + case $host_cpu in + hppa*64*|ia64*) + hardcode_direct=no + hardcode_shlibpath_var=no + ;; + *) + hardcode_direct=yes + hardcode_direct_absolute=yes + export_dynamic_flag_spec='${wl}-E' + + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + hardcode_minus_L=yes + ;; + esac + fi + ;; + + irix5* | irix6* | nonstopux*) + if test "$GCC" = yes; then + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + # Try to use the -exported_symbol ld option, if it does not + # work, assume that -exports_file does not work either and + # implicitly export all symbols. + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS -shared ${wl}-exported_symbol ${wl}foo ${wl}-update_registry ${wl}/dev/null" + cat >conftest.$ac_ext <<_ACEOF +int foo(void) {} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations ${wl}-exports_file ${wl}$export_symbols -o $lib' + +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS="$save_LDFLAGS" + else + archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -exports_file $export_symbols -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + inherit_rpath=yes + link_all_deplibs=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_direct=yes + hardcode_shlibpath_var=no + ;; + + newsos6) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + hardcode_shlibpath_var=no + ;; + + *nto* | *qnx*) + ;; + + openbsd*) + if test -f /usr/libexec/ld.so; then + hardcode_direct=yes + hardcode_shlibpath_var=no + hardcode_direct_absolute=yes + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + export_dynamic_flag_spec='${wl}-E' + else + case $host_os in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-R$libdir' + ;; + *) + archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' + hardcode_libdir_flag_spec='${wl}-rpath,$libdir' + ;; + esac + fi + else + ld_shlibs=no + fi + ;; + + os2*) + hardcode_libdir_flag_spec='-L$libdir' + hardcode_minus_L=yes + allow_undefined_flag=unsupported + archive_cmds='$ECHO "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$ECHO "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$ECHO DATA >> $output_objdir/$libname.def~$ECHO " SINGLE NONSHARED" >> $output_objdir/$libname.def~$ECHO EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' + fi + archive_cmds_need_lc='no' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + hardcode_libdir_separator=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && $ECHO "X${wl}-set_version ${wl}$verstring" | $Xsed` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' + else + allow_undefined_flag=' -expect_unresolved \*' + archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags -msym -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib' + archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; printf "%s\\n" "-hidden">> $lib.exp~ + $CC -shared${allow_undefined_flag} ${wl}-input ${wl}$lib.exp $compiler_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && $ECHO "X-set_version $verstring" | $Xsed` -update_registry ${output_objdir}/so_locations -o $lib~$RM $lib.exp' + + # Both c and cxx compiler support -rpath directly + hardcode_libdir_flag_spec='-rpath $libdir' + fi + archive_cmds_need_lc='no' + hardcode_libdir_separator=: + ;; + + solaris*) + no_undefined_flag=' -z defs' + if test "$GCC" = yes; then + wlarc='${wl}' + archive_cmds='$CC -shared ${wl}-z ${wl}text ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-z ${wl}text ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + else + case `$CC -V 2>&1` in + *"Compilers 5.0"*) + wlarc='' + archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$RM $lib.exp' + ;; + *) + wlarc='${wl}' + archive_cmds='$CC -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $compiler_flags~$RM $lib.exp' + ;; + esac + fi + hardcode_libdir_flag_spec='-R$libdir' + hardcode_shlibpath_var=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The compiler driver will combine and reorder linker options, + # but understands `-z linker_flag'. GCC discards it without `$wl', + # but is careful enough not to reorder. + # Supported since Solaris 2.6 (maybe 2.5.1?) + if test "$GCC" = yes; then + whole_archive_flag_spec='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + else + whole_archive_flag_spec='-z allextract$convenience -z defaultextract' + fi + ;; + esac + link_all_deplibs=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + hardcode_libdir_flag_spec='-L$libdir' + hardcode_direct=yes + hardcode_minus_L=yes + hardcode_shlibpath_var=no + ;; + + sysv4) + case $host_vendor in + sni) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=yes # is this really true??? + ;; + siemens) + ## LD is ld it makes a PLAMLIB + ## CC just makes a GrossModule. + archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' + reload_cmds='$CC -r -o $output$reload_objs' + hardcode_direct=no + ;; + motorola) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_direct=no #Motorola manual says yes, but my tests say they lie + ;; + esac + runpath_var='LD_RUN_PATH' + hardcode_shlibpath_var=no + ;; + + sysv4.3*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + export_dynamic_flag_spec='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_shlibpath_var=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ld_shlibs=yes + fi + ;; + + sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) + no_undefined_flag='${wl}-z,text' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + sysv5* | sco3.2v5* | sco5v6*) + # Note: We can NOT use -z defs as we might desire, because we do not + # link with -lc, and that would cause any symbols used from libc to + # always be unresolved, which means just about no library would + # ever link correctly. If we're not using GNU ld we use -z text + # though, which does catch some bad symbols but isn't as heavy-handed + # as -z defs. + no_undefined_flag='${wl}-z,text' + allow_undefined_flag='${wl}-z,nodefs' + archive_cmds_need_lc=no + hardcode_shlibpath_var=no + hardcode_libdir_flag_spec='${wl}-R,$libdir' + hardcode_libdir_separator=':' + link_all_deplibs=yes + export_dynamic_flag_spec='${wl}-Bexport' + runpath_var='LD_RUN_PATH' + + if test "$GCC" = yes; then + archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else + archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + + uts4*) + archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + hardcode_libdir_flag_spec='-L$libdir' + hardcode_shlibpath_var=no + ;; + + *) + ld_shlibs=no + ;; + esac + + if test x$host_vendor = xsni; then + case $host in + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + export_dynamic_flag_spec='${wl}-Blargedynsym' + ;; + esac + fi + fi + +{ $as_echo "$as_me:$LINENO: result: $ld_shlibs" >&5 +$as_echo "$ld_shlibs" >&6; } +test "$ld_shlibs" = no && can_build_shared=no + +with_gnu_ld=$with_gnu_ld + + + + + + + + + + + + + + + +# +# Do we need to explicitly link libc? +# +case "x$archive_cmds_need_lc" in +x|xyes) + # Assume -lc should be added + archive_cmds_need_lc=yes + + if test "$enable_shared" = yes && test "$GCC" = yes; then + case $archive_cmds in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + { $as_echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +$as_echo_n "checking whether -lc should be explicitly linked in... " >&6; } + $RM conftest* + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$lt_prog_compiler_wl + pic_flag=$lt_prog_compiler_pic + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$allow_undefined_flag + allow_undefined_flag= + if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1\"") >&5 + (eval $archive_cmds 2\>\&1 \| $GREP \" -lc \" \>/dev/null 2\>\&1) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } + then + archive_cmds_need_lc=no + else + archive_cmds_need_lc=yes + fi + allow_undefined_flag=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $RM conftest* + { $as_echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 +$as_echo "$archive_cmds_need_lc" >&6; } + ;; + esac + fi + ;; +esac + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +$as_echo_n "checking dynamic linker characteristics... " >&6; } + +if test "$GCC" = yes; then + case $host_os in + darwin*) lt_awk_arg="/^libraries:/,/LR/" ;; + *) lt_awk_arg="/^libraries:/" ;; + esac + lt_search_path_spec=`$CC -print-search-dirs | awk $lt_awk_arg | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if $ECHO "$lt_search_path_spec" | $GREP ';' >/dev/null ; then + # if the path contains ";" then we assume it to be the separator + # otherwise default to the standard path separator (i.e. ":") - it is + # assumed that no part of a normal pathname contains ";" but that should + # okay in the real world where ";" in dirpaths is itself problematic. + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e 's/;/ /g'` + else + lt_search_path_spec=`$ECHO "$lt_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + # Ok, now we have the path, separated by spaces, we can step through it + # and add multilib dir if necessary. + lt_tmp_lt_search_path_spec= + lt_multi_os_dir=`$CC $CPPFLAGS $CFLAGS $LDFLAGS -print-multi-os-directory 2>/dev/null` + for lt_sys_path in $lt_search_path_spec; do + if test -d "$lt_sys_path/$lt_multi_os_dir"; then + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path/$lt_multi_os_dir" + else + test -d "$lt_sys_path" && \ + lt_tmp_lt_search_path_spec="$lt_tmp_lt_search_path_spec $lt_sys_path" + fi + done + lt_search_path_spec=`$ECHO $lt_tmp_lt_search_path_spec | awk ' +BEGIN {RS=" "; FS="/|\n";} { + lt_foo=""; + lt_count=0; + for (lt_i = NF; lt_i > 0; lt_i--) { + if ($lt_i != "" && $lt_i != ".") { + if ($lt_i == "..") { + lt_count++; + } else { + if (lt_count == 0) { + lt_foo="/" $lt_i lt_foo; + } else { + lt_count--; + } + } + } + } + if (lt_foo != "") { lt_freq[lt_foo]++; } + if (lt_freq[lt_foo] == 1) { print lt_foo; } +}'` + sys_lib_search_path_spec=`$ECHO $lt_search_path_spec` +else + sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +fi +library_names_spec= +libname_spec='lib$name' +soname_spec= +shrext_cmds=".so" +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}${shared_ext}$major' + ;; + +aix[4-9]*) + version_type=linux + need_lib_prefix=no + need_version=no + hardcode_into_libs=yes + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + aix4 | aix4.[01] | aix4.[01].*) + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | $GREP yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib<name>.so + # instead of lib<name>.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}${shared_ext}$major' + fi + shlibpath_var=LIBPATH + fi + ;; + +amigaos*) + case $host_cpu in + powerpc) + # Since July 2007 AmigaOS4 officially supports .so libraries. + # When compiling the executable, add -use-dynld -Lsobjs: to the compileline. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + ;; + m68k) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$ECHO "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $RM /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' + ;; + esac + ;; + +beos*) + library_names_spec='${libname}${shared_ext}' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi[45]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32* | cegcc*) + version_type=windows + shrext_cmds=".dll" + need_version=no + need_lib_prefix=no + + case $GCC,$host_os in + yes,cygwin* | yes,mingw* | yes,pw32* | yes,cegcc*) + library_names_spec='$libname.dll.a' + # DLL is installed to $(libdir)/../bin by postinstall_cmds + postinstall_cmds='base_file=`basename \${file}`~ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i; echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog $dir/$dlname \$dldir/$dlname~ + chmod a+x \$dldir/$dlname~ + if test -n '\''$stripme'\'' && test -n '\''$striplib'\''; then + eval '\''$striplib \$dldir/$dlname'\'' || exit \$?; + fi' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $RM \$dlpath' + shlibpath_overrides_runpath=yes + + case $host_os in + cygwin*) + # Cygwin DLLs use 'cyg' prefix rather than 'lib' + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" + ;; + mingw* | cegcc*) + # MinGW DLLs use traditional 'lib' prefix + soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + sys_lib_search_path_spec=`$CC -print-search-dirs | $GREP "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` + if $ECHO "$sys_lib_search_path_spec" | $GREP ';[c-zC-Z]:/' >/dev/null; then + # It is most probably a Windows format PATH printed by + # mingw gcc, but we are running on Cygwin. Gcc prints its search + # path with ; separators, and with drive letters. We can handle the + # drive letters (cygwin fileutils understands them), so leave them, + # especially as we might pass files found there to a mingw objdump, + # which wouldn't understand a cygwinified path. Ahh. + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` + else + sys_lib_search_path_spec=`$ECHO "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` + fi + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; + + *) + library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${major}$shared_ext ${libname}$shared_ext' + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + + sys_lib_search_path_spec="$sys_lib_search_path_spec /usr/local/lib" + sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +freebsd* | dragonfly*) + # DragonFly does not have aout. When/if they implement a new + # versioning mechanism, adjust this. + if test -x /usr/bin/objformat; then + objformat=`/usr/bin/objformat` + else + case $host_os in + freebsd[123]*) objformat=aout ;; + *) objformat=elf ;; + esac + fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ + freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + *) # from 4.6 on, and DragonFly + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + hppa*64*) + shrext_cmds='.sl' + hardcode_into_libs=yes + dynamic_linker="$host_os dld.sl" + shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + ;; + *) + shrext_cmds='.sl' + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + ;; + esac + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +interix[3-9]*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; + *) + if test "$lt_cv_prog_gnu_ld" = yes; then + version_type=linux + else + version_type=irix + fi ;; + esac + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") + libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") + libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") + libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + hardcode_into_libs=yes + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux* | k*bsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + # Some binutils ld are patched to set DT_RUNPATH + save_LDFLAGS=$LDFLAGS + save_libdir=$libdir + eval "libdir=/foo; wl=\"$lt_prog_compiler_wl\"; \ + LDFLAGS=\"\$LDFLAGS $hardcode_libdir_flag_spec\"" + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +int +main () +{ + + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + if ($OBJDUMP -p conftest$ac_exeext) 2>/dev/null | grep "RUNPATH.*$libdir" >/dev/null; then + shlibpath_overrides_runpath=yes +fi + +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LDFLAGS=$save_LDFLAGS + libdir=$save_libdir + + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then + lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s 2>/dev/null", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;/^[ ]*hwcap[ ]/d;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | $GREP __ELF__ >/dev/null; then + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +*nto* | *qnx*) + version_type=qnx + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + dynamic_linker='ldqnx.so' + ;; + +openbsd*) + version_type=sunos + sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no + # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. + case $host_os in + openbsd3.3 | openbsd3.3.*) need_version=yes ;; + *) need_version=no ;; + esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | $GREP __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + case $host_os in + openbsd2.[89] | openbsd2.[89].*) + shlibpath_overrides_runpath=no + ;; + *) + shlibpath_overrides_runpath=yes + ;; + esac + else + shlibpath_overrides_runpath=yes + fi + ;; + +os2*) + libname_spec='$name' + shrext_cmds=".dll" + need_lib_prefix=no + library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}${shared_ext}$major' + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +rdos*) + dynamic_linker=no + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + need_lib_prefix=no + runpath_var=LD_RUN_PATH + ;; + siemens) + need_lib_prefix=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' + soname_spec='$libname${shared_ext}.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + version_type=freebsd-elf + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + if test "$with_gnu_ld" = yes; then + sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' + else + sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' + case $host_os in + sco3.2v5*) + sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" + ;; + esac + fi + sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +tpf*) + # TPF is a cross-target only. Preferred cross-host = GNU/Linux. + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +{ $as_echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +$as_echo "$dynamic_linker" >&6; } +test "$dynamic_linker" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +if test "${lt_cv_sys_lib_search_path_spec+set}" = set; then + sys_lib_search_path_spec="$lt_cv_sys_lib_search_path_spec" +fi +if test "${lt_cv_sys_lib_dlsearch_path_spec+set}" = set; then + sys_lib_dlsearch_path_spec="$lt_cv_sys_lib_dlsearch_path_spec" +fi + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + + { $as_echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +$as_echo_n "checking how to hardcode library paths into programs... " >&6; } +hardcode_action= +if test -n "$hardcode_libdir_flag_spec" || + test -n "$runpath_var" || + test "X$hardcode_automatic" = "Xyes" ; then + + # We can hardcode non-existent directories. + if test "$hardcode_direct" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_TAGVAR(hardcode_shlibpath_var, )" != no && + test "$hardcode_minus_L" != no; then + # Linking always hardcodes the temporary library directory. + hardcode_action=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + hardcode_action=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + hardcode_action=unsupported +fi +{ $as_echo "$as_me:$LINENO: result: $hardcode_action" >&5 +$as_echo "$hardcode_action" >&6; } + +if test "$hardcode_action" = relink || + test "$inherit_rpath" = yes; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi + + + + + + + if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown +else + lt_cv_dlopen=no + lt_cv_dlopen_libs= + + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; + + mingw* | pw32* | cegcc*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + cygwin*) + lt_cv_dlopen="dlopen" + lt_cv_dlopen_libs= + ;; + + darwin*) + # if libdl is installed we need to link against it + { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if test "${ac_cv_lib_dl_dlopen+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_lib_dl_dlopen=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_dl_dlopen=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = x""yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + + lt_cv_dlopen="dyld" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + +fi + + ;; + + *) + { $as_echo "$as_me:$LINENO: checking for shl_load" >&5 +$as_echo_n "checking for shl_load... " >&6; } +if test "${ac_cv_func_shl_load+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define shl_load to an innocuous variant, in case <limits.h> declares shl_load. + For example, HP-UX 11i <limits.h> declares gettimeofday. */ +#define shl_load innocuous_shl_load + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char shl_load (); below. + Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + <limits.h> exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + +#undef shl_load + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char shl_load (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_shl_load || defined __stub___shl_load +choke me +#endif + +int +main () +{ +return shl_load (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_func_shl_load=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_func_shl_load=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 +$as_echo "$ac_cv_func_shl_load" >&6; } +if test "x$ac_cv_func_shl_load" = x""yes; then + lt_cv_dlopen="shl_load" +else + { $as_echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 +$as_echo_n "checking for shl_load in -ldld... " >&6; } +if test "${ac_cv_lib_dld_shl_load+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char shl_load (); +int +main () +{ +return shl_load (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_lib_dld_shl_load=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_dld_shl_load=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 +$as_echo "$ac_cv_lib_dld_shl_load" >&6; } +if test "x$ac_cv_lib_dld_shl_load" = x""yes; then + lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-ldld" +else + { $as_echo "$as_me:$LINENO: checking for dlopen" >&5 +$as_echo_n "checking for dlopen... " >&6; } +if test "${ac_cv_func_dlopen+set}" = set; then + $as_echo_n "(cached) " >&6 +else + cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ +/* Define dlopen to an innocuous variant, in case <limits.h> declares dlopen. + For example, HP-UX 11i <limits.h> declares gettimeofday. */ +#define dlopen innocuous_dlopen + +/* System header to define __stub macros and hopefully few prototypes, + which can conflict with char dlopen (); below. + Prefer <limits.h> to <assert.h> if __STDC__ is defined, since + <limits.h> exists even on freestanding compilers. */ + +#ifdef __STDC__ +# include <limits.h> +#else +# include <assert.h> +#endif + +#undef dlopen + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +/* The GNU C library defines this for functions which it implements + to always fail with ENOSYS. Some functions are actually named + something starting with __ and the normal name is an alias. */ +#if defined __stub_dlopen || defined __stub___dlopen +choke me +#endif + +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_func_dlopen=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_func_dlopen=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 +$as_echo "$ac_cv_func_dlopen" >&6; } +if test "x$ac_cv_func_dlopen" = x""yes; then + lt_cv_dlopen="dlopen" +else + { $as_echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +$as_echo_n "checking for dlopen in -ldl... " >&6; } +if test "${ac_cv_lib_dl_dlopen+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldl $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_lib_dl_dlopen=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_dl_dlopen=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +$as_echo "$ac_cv_lib_dl_dlopen" >&6; } +if test "x$ac_cv_lib_dl_dlopen" = x""yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +else + { $as_echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 +$as_echo_n "checking for dlopen in -lsvld... " >&6; } +if test "${ac_cv_lib_svld_dlopen+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-lsvld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dlopen (); +int +main () +{ +return dlopen (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_lib_svld_dlopen=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_svld_dlopen=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 +$as_echo "$ac_cv_lib_svld_dlopen" >&6; } +if test "x$ac_cv_lib_svld_dlopen" = x""yes; then + lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" +else + { $as_echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 +$as_echo_n "checking for dld_link in -ldld... " >&6; } +if test "${ac_cv_lib_dld_dld_link+set}" = set; then + $as_echo_n "(cached) " >&6 +else + ac_check_lib_save_LIBS=$LIBS +LIBS="-ldld $LIBS" +cat >conftest.$ac_ext <<_ACEOF +/* confdefs.h. */ +_ACEOF +cat confdefs.h >>conftest.$ac_ext +cat >>conftest.$ac_ext <<_ACEOF +/* end confdefs.h. */ + +/* Override any GCC internal prototype to avoid an error. + Use char because int might match the return type of a GCC + builtin and then its argument prototype would still apply. */ +#ifdef __cplusplus +extern "C" +#endif +char dld_link (); +int +main () +{ +return dld_link (); + ; + return 0; +} +_ACEOF +rm -f conftest.$ac_objext conftest$ac_exeext +if { (ac_try="$ac_link" +case "(($ac_try" in + *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; + *) ac_try_echo=$ac_try;; +esac +eval ac_try_echo="\"\$as_me:$LINENO: $ac_try_echo\"" +$as_echo "$ac_try_echo") >&5 + (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { + test -z "$ac_c_werror_flag" || + test ! -s conftest.err + } && test -s conftest$ac_exeext && { + test "$cross_compiling" = yes || + $as_test_x conftest$ac_exeext + }; then + ac_cv_lib_dld_dld_link=yes +else + $as_echo "$as_me: failed program was:" >&5 +sed 's/^/| /' conftest.$ac_ext >&5 + + ac_cv_lib_dld_dld_link=no +fi + +rm -rf conftest.dSYM +rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext +LIBS=$ac_check_lib_save_LIBS +fi +{ $as_echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 +$as_echo "$ac_cv_lib_dld_dld_link" >&6; } +if test "x$ac_cv_lib_dld_dld_link" = x""yes; then + lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-ldld" +fi + + +fi + + +fi + + +fi + + +fi + + +fi + + ;; + esac + + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes + else + enable_dlopen=no + fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + { $as_echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 +$as_echo_n "checking whether a program can dlopen itself... " >&6; } +if test "${lt_cv_dlopen_self+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line 10804 "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include <dlfcn.h> +#endif + +#include <stdio.h> + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +} +_LT_EOF + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self=no + fi +fi +rm -fr conftest* + + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 +$as_echo "$lt_cv_dlopen_self" >&6; } + + if test "x$lt_cv_dlopen_self" = xyes; then + wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + { $as_echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 +$as_echo_n "checking whether a statically linked program can dlopen itself... " >&6; } +if test "${lt_cv_dlopen_self_static+set}" = set; then + $as_echo_n "(cached) " >&6 +else + if test "$cross_compiling" = yes; then : + lt_cv_dlopen_self_static=cross +else + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext <<_LT_EOF +#line 10900 "configure" +#include "confdefs.h" + +#if HAVE_DLFCN_H +#include <dlfcn.h> +#endif + +#include <stdio.h> + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + else + puts (dlerror ()); + + return status; +} +_LT_EOF + if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 + (eval $ac_link) 2>&5 + ac_status=$? + $as_echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) >&5 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; + x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; + esac + else : + # compilation failed + lt_cv_dlopen_self_static=no + fi +fi +rm -fr conftest* + + +fi +{ $as_echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 +$as_echo "$lt_cv_dlopen_self_static" >&6; } + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi + + + + + + + + + + + + + + + + + +striplib= +old_striplib= +{ $as_echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 +$as_echo_n "checking whether stripping libraries is possible... " >&6; } +if test -n "$STRIP" && $STRIP -V 2>&1 | $GREP "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } +else +# FIXME - insert some real tests, host_os isn't really good enough + case $host_os in + darwin*) + if test -n "$STRIP" ; then + striplib="$STRIP -x" + old_striplib="$STRIP -S" + { $as_echo "$as_me:$LINENO: result: yes" >&5 +$as_echo "yes" >&6; } + else + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } + fi + ;; + *) + { $as_echo "$as_me:$LINENO: result: no" >&5 +$as_echo "no" >&6; } + ;; + esac +fi + + + + + + + + + + + + + # Report which library types will actually be built + { $as_echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 +$as_echo_n "checking if libtool supports shared libraries... " >&6; } + { $as_echo "$as_me:$LINENO: result: $can_build_shared" >&5 +$as_echo "$can_build_shared" >&6; } + + { $as_echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 +$as_echo_n "checking whether to build shared libraries... " >&6; } + test "$can_build_shared" = "no" && enable_shared=no + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. + case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + + aix[4-9]*) + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi + ;; + esac + { $as_echo "$as_me:$LINENO: result: $enable_shared" >&5 +$as_echo "$enable_shared" >&6; } + + { $as_echo "$as_me:$LINENO: checking whether to build static libraries" >&5 +$as_echo_n "checking whether to build static libraries... " >&6; } + # Make sure either enable_shared or enable_static is yes. + test "$enable_shared" = yes || enable_static=yes + { $as_echo "$as_me:$LINENO: result: $enable_static" >&5 +$as_echo "$enable_static" >&6; } + + + + +fi +ac_ext=c +ac_cpp='$CPP $CPPFLAGS' +ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +ac_compiler_gnu=$ac_cv_c_compiler_gnu + +CC="$lt_save_CC" + + + + + + + + + + + + + + ac_config_commands="$ac_config_commands libtool" + + + + +# Only expand once: + + + +ac_config_headers="$ac_config_headers config.h" + + +## _KPSE_INIT: Initialize TL infrastructure +kpse_BLD=`(cd "./../../." && pwd)` +kpse_SRC=`(cd "$srcdir/../../." && pwd)` + +## _KPSE_LIB_FLAGS: Setup zlib (-lz) flags + +# Check whether --with-system-zlib was given. +if test "${with_system_zlib+set}" = set; then + withval=$with_system_zlib; +fi + +# Check whether --with-zlib-includes was given. +if test "${with_zlib_includes+set}" = set; then + withval=$with_zlib_includes; +fi + +# Check whether --with-zlib-libdir was given. +if test "${with_zlib_libdir+set}" = set; then + withval=$with_zlib_libdir; +fi +if test "x$with_system_zlib" = xyes; then + if test "x$with_zlib_includes" != x && test "x$with_zlib_includes" != xyes; then + ZLIB_INCLUDES="-I$with_zlib_includes" +fi +ZLIB_LIBS="-lz" +if test "x$with_zlib_libdir" != x && test "x$with_zlib_libdir" != xyes; then + ZLIB_LIBS="-L$with_zlib_libdir $ZLIB_LIBS" +fi +else + ZLIB_INCLUDES=`echo '-IBLD/libs/zlib' | sed \ + -e "s,SRC/,$kpse_SRC/,g" \ + -e "s,BLD/,$kpse_BLD/,g"` + ZLIB_LIBS=`echo 'BLD/libs/zlib/libz.a' | sed \ + -e "s,BLD/,$kpse_BLD/,g"` + ZLIB_DEPEND=`echo 'BLD/libs/zlib/libz.a' | sed \ + -e 's,BLD/,${top_builddir}/../../,g'` + ZLIB_RULE='# Rebuild libz +$(ZLIB_DEPEND): ${top_builddir}/../../libs/zlib/zlib.h ${top_builddir}/../../libs/zlib/zconf.h + cd ${top_builddir}/../../libs/zlib && $(MAKE) $(AM_MAKEFLAGS) +${top_builddir}/../../libs/zlib/zlib.h ${top_builddir}/../../libs/zlib/zconf.h: + cd ${top_builddir}/../../libs/zlib && $(MAKE) $(AM_MAKEFLAGS)' +fi + +## _KPSE_LIB_FLAGS: Setup obsdcompat (-lopenbsd-compat) flags + OBSDCOMPAT_INCLUDES=`echo '-IBLD/libs/obsdcompat -ISRC/libs/obsdcompat' | sed \ + -e "s,SRC/,$kpse_SRC/,g" \ + -e "s,BLD/,$kpse_BLD/,g"` + OBSDCOMPAT_LIBS=`echo 'BLD/libs/obsdcompat/libopenbsd-compat.a' | sed \ + -e "s,BLD/,$kpse_BLD/,g"` + OBSDCOMPAT_DEPEND=`echo 'BLD/libs/obsdcompat/libopenbsd-compat.a' | sed \ + -e 's,BLD/,${top_builddir}/../../,g'` + OBSDCOMPAT_RULE='# Rebuild libopenbsd-compat +$(OBSDCOMPAT_DEPEND): ${top_srcdir}/../../libs/obsdcompat/*.[ch] + cd ${top_builddir}/../../libs/obsdcompat && $(MAKE) $(AM_MAKEFLAGS)' + +## _KPSE_LIB_FLAGS: Setup libpng (-lpng) flags + +# Check whether --with-system-libpng was given. +if test "${with_system_libpng+set}" = set; then + withval=$with_system_libpng; +fi + +# Check whether --with-libpng-includes was given. +if test "${with_libpng_includes+set}" = set; then + withval=$with_libpng_includes; +fi + +# Check whether --with-libpng-libdir was given. +if test "${with_libpng_libdir+set}" = set; then + withval=$with_libpng_libdir; +fi +if test "x$with_system_libpng" = xyes; then + if test "x$with_libpng_includes" != x && test "x$with_libpng_includes" != xyes; then + LIBPNG_INCLUDES="-I$with_libpng_includes" +fi +LIBPNG_LIBS="-lpng" +if test "x$with_libpng_libdir" != x && test "x$with_libpng_libdir" != xyes; then + LIBPNG_LIBS="-L$with_libpng_libdir $LIBPNG_LIBS" +fi +else + LIBPNG_INCLUDES=`echo '-IBLD/libs/libpng' | sed \ + -e "s,SRC/,$kpse_SRC/,g" \ + -e "s,BLD/,$kpse_BLD/,g"` + LIBPNG_LIBS=`echo 'BLD/libs/libpng/libpng.a' | sed \ + -e "s,BLD/,$kpse_BLD/,g"` + LIBPNG_DEPEND=`echo 'BLD/libs/libpng/libpng.a' | sed \ + -e 's,BLD/,${top_builddir}/../../,g'` + LIBPNG_RULE='# Rebuild libpng +$(LIBPNG_DEPEND): ${top_builddir}/../../libs/libpng/png.h ${top_builddir}/../../libs/libpng/pngconf.h + cd ${top_builddir}/../../libs/libpng && $(MAKE) $(AM_MAKEFLAGS) +${top_builddir}/../../libs/libpng/png.h ${top_builddir}/../../libs/libpng/pngconf.h: + cd ${top_builddir}/../../libs/libpng && $(MAKE) $(AM_MAKEFLAGS)' +fi + +## _KPSE_LIB_FLAGS: Setup t1lib (-lt1) flags + +# Check whether --with-system-t1lib was given. +if test "${with_system_t1lib+set}" = set; then + withval=$with_system_t1lib; +fi + +# Check whether --with-t1lib-includes was given. +if test "${with_t1lib_includes+set}" = set; then + withval=$with_t1lib_includes; +fi + +# Check whether --with-t1lib-libdir was given. +if test "${with_t1lib_libdir+set}" = set; then + withval=$with_t1lib_libdir; +fi +if test "x$with_system_t1lib" = xyes; then + if test "x$with_t1lib_includes" != x && test "x$with_t1lib_includes" != xyes; then + T1LIB_INCLUDES="-I$with_t1lib_includes" +fi +T1LIB_LIBS="-lt1" +if test "x$with_t1lib_libdir" != x && test "x$with_t1lib_libdir" != xyes; then + T1LIB_LIBS="-L$with_t1lib_libdir $T1LIB_LIBS" +fi +else + T1LIB_INCLUDES=`echo '-IBLD/libs/t1lib' | sed \ + -e "s,SRC/,$kpse_SRC/,g" \ + -e "s,BLD/,$kpse_BLD/,g"` + T1LIB_LIBS=`echo 'BLD/libs/t1lib/libt1.a' | sed \ + -e "s,BLD/,$kpse_BLD/,g"` + T1LIB_DEPEND=`echo 'BLD/libs/t1lib/libt1.a' | sed \ + -e 's,BLD/,${top_builddir}/../../,g'` + T1LIB_RULE='# Rebuild libt1 +$(T1LIB_DEPEND): ${top_builddir}/../../libs/t1lib/t1lib.h + cd ${top_builddir}/../../libs/t1lib && $(MAKE) $(AM_MAKEFLAGS) +${top_builddir}/../../libs/t1lib/t1lib.h: + cd ${top_builddir}/../../libs/t1lib && $(MAKE) $(AM_MAKEFLAGS)' +fi + +## _KPSE_LIB_FLAGS: Setup freetype2 (-lfreetype) flags + +# Check whether --with-system-freetype2 was given. +if test "${with_system_freetype2+set}" = set; then + withval=$with_system_freetype2; +fi + +# Check whether --with-freetype2-includes was given. +if test "${with_freetype2_includes+set}" = set; then + withval=$with_freetype2_includes; +fi + +# Check whether --with-freetype2-libdir was given. +if test "${with_freetype2_libdir+set}" = set; then + withval=$with_freetype2_libdir; +fi +if test "x$with_system_freetype2" = xyes; then + if test "x$with_freetype2_includes" != x && test "x$with_freetype2_includes" != xyes; then + FREETYPE2_INCLUDES="-I$with_freetype2_includes/freetype2 -I$with_freetype2_includes" +fi +FREETYPE2_LIBS="-lfreetype" +if test "x$with_freetype2_libdir" != x && test "x$with_freetype2_libdir" != xyes; then + FREETYPE2_LIBS="-L$with_freetype2_libdir $FREETYPE2_LIBS" +fi +else + FREETYPE2_INCLUDES=`echo '-IBLD/libs/freetype2/freetype2 -IBLD/libs/freetype2' | sed \ + -e "s,SRC/,$kpse_SRC/,g" \ + -e "s,BLD/,$kpse_BLD/,g"` + FREETYPE2_LIBS=`echo 'BLD/libs/freetype2/libfreetype.a' | sed \ + -e "s,BLD/,$kpse_BLD/,g"` + FREETYPE2_DEPEND=`echo 'BLD/libs/freetype2/libfreetype.a' | sed \ + -e 's,BLD/,${top_builddir}/../../,g'` + FREETYPE2_RULE='# Rebuild libfreetype +$(FREETYPE2_DEPEND): ${top_builddir}/../../libs/freetype2/ft2build.h + cd ${top_builddir}/../../libs/freetype2 && $(MAKE) $(AM_MAKEFLAGS) +${top_builddir}/../../libs/freetype2/ft2build.h: + cd ${top_builddir}/../../libs/freetype2 && $(MAKE) $(AM_MAKEFLAGS)' +fi + +## _KPSE_LIB_FLAGS: Setup gd (-lgd) flags + +# Check whether --with-system-gd was given. +if test "${with_system_gd+set}" = set; then + withval=$with_system_gd; +fi + +# Check whether --with-gd-includes was given. +if test "${with_gd_includes+set}" = set; then + withval=$with_gd_includes; +fi + +# Check whether --with-gd-libdir was given. +if test "${with_gd_libdir+set}" = set; then + withval=$with_gd_libdir; +fi +if test "x$with_system_gd" = xyes; then + if test "x$with_gd_includes" != x && test "x$with_gd_includes" != xyes; then + GD_INCLUDES="-I$with_gd_includes" +fi +GD_LIBS="-lgd" +if test "x$with_gd_libdir" != x && test "x$with_gd_libdir" != xyes; then + GD_LIBS="-L$with_gd_libdir $GD_LIBS" +fi +else + GD_INCLUDES=`echo '-IBLD/libs/gd' | sed \ + -e "s,SRC/,$kpse_SRC/,g" \ + -e "s,BLD/,$kpse_BLD/,g"` + GD_LIBS=`echo 'BLD/libs/gd/libgd.a' | sed \ + -e "s,BLD/,$kpse_BLD/,g"` + GD_DEPEND=`echo 'BLD/libs/gd/libgd.a' | sed \ + -e 's,BLD/,${top_builddir}/../../,g'` + GD_RULE='# Rebuild libgd +$(GD_DEPEND): ${top_builddir}/../../libs/libpng/gd.h + cd ${top_builddir}/../../libs/gd && $(MAKE) $(AM_MAKEFLAGS) +${top_builddir}/../../libs/libpng/gd.h: + cd ${top_builddir}/../../libs/gd && $(MAKE) $(AM_MAKEFLAGS)' +fi + +## _KPSE_LIB_FLAGS: Setup xpdf (-lxpdf) flags + XPDF_INCLUDES=`echo '-DPDF_PARSER_ONLY -IBLD/libs/xpdf -IBLD/libs/xpdf/goo -IBLD/libs/xpdf/fofi -IBLD/libs/xpdf/xpdf' | sed \ + -e "s,SRC/,$kpse_SRC/,g" \ + -e "s,BLD/,$kpse_BLD/,g"` + XPDF_LIBS=`echo 'BLD/libs/xpdf/libxpdf.a' | sed \ + -e "s,BLD/,$kpse_BLD/,g"` + XPDF_DEPEND=`echo 'BLD/libs/xpdf/libxpdf.a' | sed \ + -e 's,BLD/,${top_builddir}/../../,g'` + XPDF_RULE='# Rebuild libxpdf +$(XPDF_DEPEND): ${top_builddir}/../../libs/xpdf/xpdf/Stream.h + cd ${top_builddir}/../../libs/xpdf && $(MAKE) $(AM_MAKEFLAGS) +${top_builddir}/../../libs/xpdf/xpdf/Stream.h: + cd ${top_builddir}/../../libs/xpdf && $(MAKE) $(AM_MAKEFLAGS)' + +## _KPSE_LIB_FLAGS: Setup graphite (-lgraphite) flags + +# Check whether --with-system-graphite was given. +if test "${with_system_graphite+set}" = set; then + withval=$with_system_graphite; +fi + +# Check whether --with-graphite-includes was given. +if test "${with_graphite_includes+set}" = set; then + withval=$with_graphite_includes; +fi + +# Check whether --with-graphite-libdir was given. +if test "${with_graphite_libdir+set}" = set; then + withval=$with_graphite_libdir; +fi +if test "x$with_system_graphite" = xyes; then + if test "x$with_graphite_includes" != x && test "x$with_graphite_includes" != xyes; then + GRAPHITE_INCLUDES="-I$with_graphite_includes" +fi +GRAPHITE_LIBS="-lgraphite" +if test "x$with_graphite_libdir" != x && test "x$with_graphite_libdir" != xyes; then + GRAPHITE_LIBS="-L$with_graphite_libdir $GRAPHITE_LIBS" +fi +else + GRAPHITE_INCLUDES=`echo '-ISRC/libs/graphite/include' | sed \ + -e "s,SRC/,$kpse_SRC/,g" \ + -e "s,BLD/,$kpse_BLD/,g"` + GRAPHITE_LIBS=`echo 'BLD/libs/graphite/libgraphite.a' | sed \ + -e "s,BLD/,$kpse_BLD/,g"` + GRAPHITE_DEPEND=`echo 'BLD/libs/graphite/libgraphite.a' | sed \ + -e 's,BLD/,${top_builddir}/../../,g'` + GRAPHITE_RULE='# Rebuild libgraphite +$(GRAPHITE_DEPEND): + cd ${top_builddir}/../../libs/graphite && $(MAKE) $(AM_MAKEFLAGS)' +fi + +## _KPSE_LIB_FLAGS: Setup teckit (-lTECkit) flags + +# Check whether --with-system-teckit was given. +if test "${with_system_teckit+set}" = set; then + withval=$with_system_teckit; +fi + +# Check whether --with-teckit-includes was given. +if test "${with_teckit_includes+set}" = set; then + withval=$with_teckit_includes; +fi + +# Check whether --with-teckit-libdir was given. +if test "${with_teckit_libdir+set}" = set; then + withval=$with_teckit_libdir; +fi +if test "x$with_system_teckit" = xyes; then + if test "x$with_teckit_includes" != x && test "x$with_teckit_includes" != xyes; then + TECKIT_INCLUDES="-I$with_teckit_includes" +fi +TECKIT_LIBS="-lTECkit" +if test "x$with_teckit_libdir" != x && test "x$with_teckit_libdir" != xyes; then + TECKIT_LIBS="-L$with_teckit_libdir $TECKIT_LIBS" +fi +else + TECKIT_INCLUDES=`echo '-ISRC/libs/teckit/source/Public-headers' | sed \ + -e "s,SRC/,$kpse_SRC/,g" \ + -e "s,BLD/,$kpse_BLD/,g"` + TECKIT_LIBS=`echo 'BLD/libs/teckit/libTECkit.a' | sed \ + -e "s,BLD/,$kpse_BLD/,g"` + TECKIT_DEPEND=`echo 'BLD/libs/teckit/libTECkit.a' | sed \ + -e 's,BLD/,${top_builddir}/../../,g'` + TECKIT_RULE='# Rebuild libTECkit +$(TECKIT_DEPEND): + cd ${top_builddir}/../../libs/teckit && $(MAKE) $(AM_MAKEFLAGS)' +fi + + +ac_config_files="$ac_config_files Makefile" + + +cat >confcache <<\_ACEOF +# This file is a shell script that caches the results of configure +# tests run on this system so they can be shared between configure +# scripts and configure runs, see configure's option --config-cache. +# It is not useful on other systems. If it contains results you don't +# want to keep, you may remove or edit it. +# +# config.status only pays attention to the cache file if you give it +# the --recheck option to rerun configure. +# +# `ac_cv_env_foo' variables (set or unset) will be overridden when +# loading this file, other *unset* `ac_cv_foo' will be assigned the +# following values. + +_ACEOF + +# The following way of writing the cache mishandles newlines in values, +# but we know of no workaround that is simple, portable, and efficient. +# So, we kill variables containing newlines. +# Ultrix sh set writes to stderr and can't be redirected directly, +# and sets the high bit in the cache file unless we assign to the vars. +( + for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do + eval ac_val=\$$ac_var + case $ac_val in #( + *${as_nl}*) + case $ac_var in #( + *_cv_*) { $as_echo "$as_me:$LINENO: WARNING: cache variable $ac_var contains a newline" >&5 +$as_echo "$as_me: WARNING: cache variable $ac_var contains a newline" >&2;} ;; + esac + case $ac_var in #( + _ | IFS | as_nl) ;; #( + BASH_ARGV | BASH_SOURCE) eval $ac_var= ;; #( + *) $as_unset $ac_var ;; + esac ;; + esac + done + + (set) 2>&1 | + case $as_nl`(ac_space=' '; set) 2>&1` in #( + *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" + ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. + sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; + esac | + sort +) | + sed ' + /^ac_cv_env_/b end + t clear + :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end + s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ + :end' >>confcache +if diff "$cache_file" confcache >/dev/null 2>&1; then :; else + if test -w "$cache_file"; then + test "x$cache_file" != "x/dev/null" && + { $as_echo "$as_me:$LINENO: updating cache $cache_file" >&5 +$as_echo "$as_me: updating cache $cache_file" >&6;} + cat confcache >$cache_file + else + { $as_echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 +$as_echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi +fi +rm -f confcache + +test "x$prefix" = xNONE && prefix=$ac_default_prefix +# Let make expand exec_prefix. +test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +DEFS=-DHAVE_CONFIG_H + +ac_libobjs= +ac_ltlibobjs= +for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. + ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' + ac_i=`$as_echo "$ac_i" | sed "$ac_script"` + # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR + # will be set to the directory where LIBOBJS objects are built. + ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" + ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' +done +LIBOBJS=$ac_libobjs + +LTLIBOBJS=$ac_ltlibobjs + + +if test -z "${MAINTAINER_MODE_TRUE}" && test -z "${MAINTAINER_MODE_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"MAINTAINER_MODE\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"MAINTAINER_MODE\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"AMDEP\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi +if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then + { { $as_echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." >&5 +$as_echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. +Usually this means the macro was only invoked conditionally." >&2;} + { (exit 1); exit 1; }; } +fi + +: ${CONFIG_STATUS=./config.status} +ac_write_fail=0 +ac_clean_files_save=$ac_clean_files +ac_clean_files="$ac_clean_files $CONFIG_STATUS" +{ $as_echo "$as_me:$LINENO: creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: creating $CONFIG_STATUS" >&6;} +cat >$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +#! $SHELL +# Generated by $as_me. +# Run this file to recreate the current configuration. +# Compiler output produced by configure, useful for debugging +# configure, is in config.log if it exists. + +debug=false +ac_cs_recheck=false +ac_cs_silent=false +SHELL=\${CONFIG_SHELL-$SHELL} +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +## --------------------- ## +## M4sh Initialization. ## +## --------------------- ## + +# Be more Bourne compatible +DUALCASE=1; export DUALCASE # for MKS sh +if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Pre-4.2 versions of Zsh do word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' + setopt NO_GLOB_SUBST +else + case `(set -o) 2>/dev/null` in + *posix*) set -o posix ;; +esac + +fi + + + + +# PATH needs CR +# Avoid depending upon Character Ranges. +as_cr_letters='abcdefghijklmnopqrstuvwxyz' +as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +as_cr_Letters=$as_cr_letters$as_cr_LETTERS +as_cr_digits='0123456789' +as_cr_alnum=$as_cr_Letters$as_cr_digits + +as_nl=' +' +export as_nl +# Printing a long string crashes Solaris 7 /usr/bin/printf. +as_echo='\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\' +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo +as_echo=$as_echo$as_echo$as_echo$as_echo$as_echo$as_echo +if (test "X`printf %s $as_echo`" = "X$as_echo") 2>/dev/null; then + as_echo='printf %s\n' + as_echo_n='printf %s' +else + if test "X`(/usr/ucb/echo -n -n $as_echo) 2>/dev/null`" = "X-n $as_echo"; then + as_echo_body='eval /usr/ucb/echo -n "$1$as_nl"' + as_echo_n='/usr/ucb/echo -n' + else + as_echo_body='eval expr "X$1" : "X\\(.*\\)"' + as_echo_n_body='eval + arg=$1; + case $arg in + *"$as_nl"*) + expr "X$arg" : "X\\(.*\\)$as_nl"; + arg=`expr "X$arg" : ".*$as_nl\\(.*\\)"`;; + esac; + expr "X$arg" : "X\\(.*\\)" | tr -d "$as_nl" + ' + export as_echo_n_body + as_echo_n='sh -c $as_echo_n_body as_echo' + fi + export as_echo_body + as_echo='sh -c $as_echo_body as_echo' +fi + +# The user is always right. +if test "${PATH_SEPARATOR+set}" != set; then + PATH_SEPARATOR=: + (PATH='/bin;/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 && { + (PATH='/bin:/bin'; FPATH=$PATH; sh -c :) >/dev/null 2>&1 || + PATH_SEPARATOR=';' + } +fi + +# Support unset when possible. +if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then + as_unset=unset +else + as_unset=false +fi + + +# IFS +# We need space, tab and new line, in precisely that order. Quoting is +# there to prevent editors from complaining about space-tab. +# (If _AS_PATH_WALK were called with IFS unset, it would disable word +# splitting by setting IFS to empty value.) +IFS=" "" $as_nl" + +# Find who we are. Look in the path if we contain no directory separator. +case $0 in + *[\\/]* ) as_myself=$0 ;; + *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +for as_dir in $PATH +do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +done +IFS=$as_save_IFS + + ;; +esac +# We did not find ourselves, most probably we were run as `sh COMMAND' +# in which case we are not to be found in the path. +if test "x$as_myself" = x; then + as_myself=$0 +fi +if test ! -f "$as_myself"; then + $as_echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 + { (exit 1); exit 1; } +fi + +# Work around bugs in pre-3.0 UWIN ksh. +for as_var in ENV MAIL MAILPATH +do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var +done +PS1='$ ' +PS2='> ' +PS4='+ ' + +# NLS nuisances. +LC_ALL=C +export LC_ALL +LANGUAGE=C +export LANGUAGE + +# Required to use basename. +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename +else + as_basename=false +fi + + +# Name of the executable. +as_me=`$as_basename -- "$0" || +$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ + X"$0" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X/"$0" | + sed '/^.*\/\([^/][^/]*\)\/*$/{ + s//\1/ + q + } + /^X\/\(\/\/\)$/{ + s//\1/ + q + } + /^X\/\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + +# CDPATH. +$as_unset CDPATH + + + + as_lineno_1=$LINENO + as_lineno_2=$LINENO + test "x$as_lineno_1" != "x$as_lineno_2" && + test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a + # line-number line after each line using $LINENO; the second 'sed' + # does the real work. The second script uses 'N' to pair each + # line-number line with the line containing $LINENO, and appends + # trailing '-' during substitution so that $LINENO is not a special + # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the + # scripts with optimization help from Paolo Bonzini. Blame Lee + # E. McMahon (1931-1989) for sed's syntax. :-) + sed -n ' + p + /[$]LINENO/= + ' <$as_myself | + sed ' + s/[$]LINENO.*/&-/ + t lineno + b + :lineno + N + :loop + s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop + s/-\n.*// + ' >$as_me.lineno && + chmod +x "$as_me.lineno" || + { $as_echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the + # original and so on. Autoconf is especially sensitive to this). + . "./$as_me.lineno" + # Exit status is that of the last command. + exit +} + + +if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then + as_dirname=dirname +else + as_dirname=false +fi + +ECHO_C= ECHO_N= ECHO_T= +case `echo -n x` in +-n*) + case `echo 'x\c'` in + *c*) ECHO_T=' ';; # ECHO_T is single tab character. + *) ECHO_C='\c';; + esac;; +*) + ECHO_N='-n';; +esac +if expr a : '\(a\)' >/dev/null 2>&1 && + test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr +else + as_expr=false +fi + +rm -f conf$$ conf$$.exe conf$$.file +if test -d conf$$.dir; then + rm -f conf$$.dir/conf$$.file +else + rm -f conf$$.dir + mkdir conf$$.dir 2>/dev/null +fi +if (echo >conf$$.file) 2>/dev/null; then + if ln -s conf$$.file conf$$ 2>/dev/null; then + as_ln_s='ln -s' + # ... but there are two gotchas: + # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. + # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. + # In both cases, we have to default to `cp -p'. + ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi +else + as_ln_s='cp -p' +fi +rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file +rmdir conf$$.dir 2>/dev/null + +if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +else + test -d ./-p && rmdir ./-p + as_mkdir_p=false +fi + +if test -x / >/dev/null 2>&1; then + as_test_x='test -x' +else + if ls -dL / >/dev/null 2>&1; then + as_ls_L_option=L + else + as_ls_L_option= + fi + as_test_x=' + eval sh -c '\'' + if test -d "$1"; then + test -d "$1/."; + else + case $1 in + -*)set "./$1";; + esac; + case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in + ???[sx]*):;;*)false;;esac;fi + '\'' sh + ' +fi +as_executable_p=$as_test_x + +# Sed expression to map a string onto a valid CPP name. +as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" + +# Sed expression to map a string onto a valid variable name. +as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +exec 6>&1 + +# Save the log message, to keep $[0] and so on meaningful, and to +# report actual input values of CONFIG_FILES etc. instead of their +# values after options handling. +ac_log=" +This file was extended by bld-test-texk-one $as_me 1.1, which was +generated by GNU Autoconf 2.63. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS + CONFIG_LINKS = $CONFIG_LINKS + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +on `(hostname || uname -n) 2>/dev/null | sed 1q` +" + +_ACEOF + +case $ac_config_files in *" +"*) set x $ac_config_files; shift; ac_config_files=$*;; +esac + +case $ac_config_headers in *" +"*) set x $ac_config_headers; shift; ac_config_headers=$*;; +esac + + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# Files that config.status was made for. +config_files="$ac_config_files" +config_headers="$ac_config_headers" +config_commands="$ac_config_commands" + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +ac_cs_usage="\ +\`$as_me' instantiates files from templates according to the +current configuration. + +Usage: $0 [OPTION]... [FILE]... + + -h, --help print this help, then exit + -V, --version print version number and configuration settings, then exit + -q, --quiet, --silent + do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions + --file=FILE[:TEMPLATE] + instantiate the configuration file FILE + --header=FILE[:TEMPLATE] + instantiate the configuration header FILE + +Configuration files: +$config_files + +Configuration headers: +$config_headers + +Configuration commands: +$config_commands + +Report bugs to <bug-autoconf@gnu.org>." + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_cs_version="\\ +bld-test-texk-one config.status 1.1 +configured by $0, generated by GNU Autoconf 2.63, + with options \\"`$as_echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" + +Copyright (C) 2008 Free Software Foundation, Inc. +This config.status script is free software; the Free Software Foundation +gives unlimited permission to copy, distribute and modify it." + +ac_pwd='$ac_pwd' +srcdir='$srcdir' +INSTALL='$INSTALL' +MKDIR_P='$MKDIR_P' +AWK='$AWK' +test -n "\$AWK" || AWK=awk +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# The default lists apply if the user does not specify any file. +ac_need_defaults=: +while test $# != 0 +do + case $1 in + --*=*) + ac_option=`expr "X$1" : 'X\([^=]*\)='` + ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; + *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; + esac + + case $ac_option in + # Handling of the options. + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; + --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) + $as_echo "$ac_cs_version"; exit ;; + --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + CONFIG_FILES="$CONFIG_FILES '$ac_optarg'" + ac_need_defaults=false;; + --header | --heade | --head | --hea ) + $ac_shift + case $ac_optarg in + *\'*) ac_optarg=`$as_echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + CONFIG_HEADERS="$CONFIG_HEADERS '$ac_optarg'" + ac_need_defaults=false;; + --he | --h) + # Conflict between --help and --header + { $as_echo "$as_me: error: ambiguous option: $1 +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; };; + --help | --hel | -h ) + $as_echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. + -*) { $as_echo "$as_me: error: unrecognized option: $1 +Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } ;; + + *) ac_config_targets="$ac_config_targets $1" + ac_need_defaults=false ;; + + esac + shift +done + +ac_configure_extra_args= + +if $ac_cs_silent; then + exec 6>/dev/null + ac_configure_extra_args="$ac_configure_extra_args --silent" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +if \$ac_cs_recheck; then + set X '$SHELL' '$0' $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + shift + \$as_echo "running CONFIG_SHELL=$SHELL \$*" >&6 + CONFIG_SHELL='$SHELL' + export CONFIG_SHELL + exec "\$@" +fi + +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +exec 5>>config.log +{ + echo + sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +## Running $as_me. ## +_ASBOX + $as_echo "$ac_log" +} >&5 + +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +# +# INIT-COMMANDS +# +AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" + + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + +sed_quote_subst='$sed_quote_subst' +double_quote_subst='$double_quote_subst' +delay_variable_subst='$delay_variable_subst' +macro_version='`$ECHO "X$macro_version" | $Xsed -e "$delay_single_quote_subst"`' +macro_revision='`$ECHO "X$macro_revision" | $Xsed -e "$delay_single_quote_subst"`' +enable_shared='`$ECHO "X$enable_shared" | $Xsed -e "$delay_single_quote_subst"`' +enable_static='`$ECHO "X$enable_static" | $Xsed -e "$delay_single_quote_subst"`' +pic_mode='`$ECHO "X$pic_mode" | $Xsed -e "$delay_single_quote_subst"`' +enable_fast_install='`$ECHO "X$enable_fast_install" | $Xsed -e "$delay_single_quote_subst"`' +host_alias='`$ECHO "X$host_alias" | $Xsed -e "$delay_single_quote_subst"`' +host='`$ECHO "X$host" | $Xsed -e "$delay_single_quote_subst"`' +host_os='`$ECHO "X$host_os" | $Xsed -e "$delay_single_quote_subst"`' +build_alias='`$ECHO "X$build_alias" | $Xsed -e "$delay_single_quote_subst"`' +build='`$ECHO "X$build" | $Xsed -e "$delay_single_quote_subst"`' +build_os='`$ECHO "X$build_os" | $Xsed -e "$delay_single_quote_subst"`' +SED='`$ECHO "X$SED" | $Xsed -e "$delay_single_quote_subst"`' +Xsed='`$ECHO "X$Xsed" | $Xsed -e "$delay_single_quote_subst"`' +GREP='`$ECHO "X$GREP" | $Xsed -e "$delay_single_quote_subst"`' +EGREP='`$ECHO "X$EGREP" | $Xsed -e "$delay_single_quote_subst"`' +FGREP='`$ECHO "X$FGREP" | $Xsed -e "$delay_single_quote_subst"`' +LD='`$ECHO "X$LD" | $Xsed -e "$delay_single_quote_subst"`' +NM='`$ECHO "X$NM" | $Xsed -e "$delay_single_quote_subst"`' +LN_S='`$ECHO "X$LN_S" | $Xsed -e "$delay_single_quote_subst"`' +max_cmd_len='`$ECHO "X$max_cmd_len" | $Xsed -e "$delay_single_quote_subst"`' +ac_objext='`$ECHO "X$ac_objext" | $Xsed -e "$delay_single_quote_subst"`' +exeext='`$ECHO "X$exeext" | $Xsed -e "$delay_single_quote_subst"`' +lt_unset='`$ECHO "X$lt_unset" | $Xsed -e "$delay_single_quote_subst"`' +lt_SP2NL='`$ECHO "X$lt_SP2NL" | $Xsed -e "$delay_single_quote_subst"`' +lt_NL2SP='`$ECHO "X$lt_NL2SP" | $Xsed -e "$delay_single_quote_subst"`' +reload_flag='`$ECHO "X$reload_flag" | $Xsed -e "$delay_single_quote_subst"`' +reload_cmds='`$ECHO "X$reload_cmds" | $Xsed -e "$delay_single_quote_subst"`' +OBJDUMP='`$ECHO "X$OBJDUMP" | $Xsed -e "$delay_single_quote_subst"`' +deplibs_check_method='`$ECHO "X$deplibs_check_method" | $Xsed -e "$delay_single_quote_subst"`' +file_magic_cmd='`$ECHO "X$file_magic_cmd" | $Xsed -e "$delay_single_quote_subst"`' +AR='`$ECHO "X$AR" | $Xsed -e "$delay_single_quote_subst"`' +AR_FLAGS='`$ECHO "X$AR_FLAGS" | $Xsed -e "$delay_single_quote_subst"`' +STRIP='`$ECHO "X$STRIP" | $Xsed -e "$delay_single_quote_subst"`' +RANLIB='`$ECHO "X$RANLIB" | $Xsed -e "$delay_single_quote_subst"`' +old_postinstall_cmds='`$ECHO "X$old_postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' +old_postuninstall_cmds='`$ECHO "X$old_postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' +old_archive_cmds='`$ECHO "X$old_archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' +CC='`$ECHO "X$CC" | $Xsed -e "$delay_single_quote_subst"`' +CFLAGS='`$ECHO "X$CFLAGS" | $Xsed -e "$delay_single_quote_subst"`' +compiler='`$ECHO "X$compiler" | $Xsed -e "$delay_single_quote_subst"`' +GCC='`$ECHO "X$GCC" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_pipe='`$ECHO "X$lt_cv_sys_global_symbol_pipe" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_cdecl='`$ECHO "X$lt_cv_sys_global_symbol_to_cdecl" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix='`$ECHO "X$lt_cv_sys_global_symbol_to_c_name_address_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' +objdir='`$ECHO "X$objdir" | $Xsed -e "$delay_single_quote_subst"`' +SHELL='`$ECHO "X$SHELL" | $Xsed -e "$delay_single_quote_subst"`' +ECHO='`$ECHO "X$ECHO" | $Xsed -e "$delay_single_quote_subst"`' +MAGIC_CMD='`$ECHO "X$MAGIC_CMD" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_no_builtin_flag='`$ECHO "X$lt_prog_compiler_no_builtin_flag" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_wl='`$ECHO "X$lt_prog_compiler_wl" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_pic='`$ECHO "X$lt_prog_compiler_pic" | $Xsed -e "$delay_single_quote_subst"`' +lt_prog_compiler_static='`$ECHO "X$lt_prog_compiler_static" | $Xsed -e "$delay_single_quote_subst"`' +lt_cv_prog_compiler_c_o='`$ECHO "X$lt_cv_prog_compiler_c_o" | $Xsed -e "$delay_single_quote_subst"`' +need_locks='`$ECHO "X$need_locks" | $Xsed -e "$delay_single_quote_subst"`' +DSYMUTIL='`$ECHO "X$DSYMUTIL" | $Xsed -e "$delay_single_quote_subst"`' +NMEDIT='`$ECHO "X$NMEDIT" | $Xsed -e "$delay_single_quote_subst"`' +LIPO='`$ECHO "X$LIPO" | $Xsed -e "$delay_single_quote_subst"`' +OTOOL='`$ECHO "X$OTOOL" | $Xsed -e "$delay_single_quote_subst"`' +OTOOL64='`$ECHO "X$OTOOL64" | $Xsed -e "$delay_single_quote_subst"`' +libext='`$ECHO "X$libext" | $Xsed -e "$delay_single_quote_subst"`' +shrext_cmds='`$ECHO "X$shrext_cmds" | $Xsed -e "$delay_single_quote_subst"`' +extract_expsyms_cmds='`$ECHO "X$extract_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' +archive_cmds_need_lc='`$ECHO "X$archive_cmds_need_lc" | $Xsed -e "$delay_single_quote_subst"`' +enable_shared_with_static_runtimes='`$ECHO "X$enable_shared_with_static_runtimes" | $Xsed -e "$delay_single_quote_subst"`' +export_dynamic_flag_spec='`$ECHO "X$export_dynamic_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' +whole_archive_flag_spec='`$ECHO "X$whole_archive_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' +compiler_needs_object='`$ECHO "X$compiler_needs_object" | $Xsed -e "$delay_single_quote_subst"`' +old_archive_from_new_cmds='`$ECHO "X$old_archive_from_new_cmds" | $Xsed -e "$delay_single_quote_subst"`' +old_archive_from_expsyms_cmds='`$ECHO "X$old_archive_from_expsyms_cmds" | $Xsed -e "$delay_single_quote_subst"`' +archive_cmds='`$ECHO "X$archive_cmds" | $Xsed -e "$delay_single_quote_subst"`' +archive_expsym_cmds='`$ECHO "X$archive_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' +module_cmds='`$ECHO "X$module_cmds" | $Xsed -e "$delay_single_quote_subst"`' +module_expsym_cmds='`$ECHO "X$module_expsym_cmds" | $Xsed -e "$delay_single_quote_subst"`' +with_gnu_ld='`$ECHO "X$with_gnu_ld" | $Xsed -e "$delay_single_quote_subst"`' +allow_undefined_flag='`$ECHO "X$allow_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' +no_undefined_flag='`$ECHO "X$no_undefined_flag" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec='`$ECHO "X$hardcode_libdir_flag_spec" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_libdir_flag_spec_ld='`$ECHO "X$hardcode_libdir_flag_spec_ld" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_libdir_separator='`$ECHO "X$hardcode_libdir_separator" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_direct='`$ECHO "X$hardcode_direct" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_direct_absolute='`$ECHO "X$hardcode_direct_absolute" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_minus_L='`$ECHO "X$hardcode_minus_L" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_shlibpath_var='`$ECHO "X$hardcode_shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_automatic='`$ECHO "X$hardcode_automatic" | $Xsed -e "$delay_single_quote_subst"`' +inherit_rpath='`$ECHO "X$inherit_rpath" | $Xsed -e "$delay_single_quote_subst"`' +link_all_deplibs='`$ECHO "X$link_all_deplibs" | $Xsed -e "$delay_single_quote_subst"`' +fix_srcfile_path='`$ECHO "X$fix_srcfile_path" | $Xsed -e "$delay_single_quote_subst"`' +always_export_symbols='`$ECHO "X$always_export_symbols" | $Xsed -e "$delay_single_quote_subst"`' +export_symbols_cmds='`$ECHO "X$export_symbols_cmds" | $Xsed -e "$delay_single_quote_subst"`' +exclude_expsyms='`$ECHO "X$exclude_expsyms" | $Xsed -e "$delay_single_quote_subst"`' +include_expsyms='`$ECHO "X$include_expsyms" | $Xsed -e "$delay_single_quote_subst"`' +prelink_cmds='`$ECHO "X$prelink_cmds" | $Xsed -e "$delay_single_quote_subst"`' +file_list_spec='`$ECHO "X$file_list_spec" | $Xsed -e "$delay_single_quote_subst"`' +variables_saved_for_relink='`$ECHO "X$variables_saved_for_relink" | $Xsed -e "$delay_single_quote_subst"`' +need_lib_prefix='`$ECHO "X$need_lib_prefix" | $Xsed -e "$delay_single_quote_subst"`' +need_version='`$ECHO "X$need_version" | $Xsed -e "$delay_single_quote_subst"`' +version_type='`$ECHO "X$version_type" | $Xsed -e "$delay_single_quote_subst"`' +runpath_var='`$ECHO "X$runpath_var" | $Xsed -e "$delay_single_quote_subst"`' +shlibpath_var='`$ECHO "X$shlibpath_var" | $Xsed -e "$delay_single_quote_subst"`' +shlibpath_overrides_runpath='`$ECHO "X$shlibpath_overrides_runpath" | $Xsed -e "$delay_single_quote_subst"`' +libname_spec='`$ECHO "X$libname_spec" | $Xsed -e "$delay_single_quote_subst"`' +library_names_spec='`$ECHO "X$library_names_spec" | $Xsed -e "$delay_single_quote_subst"`' +soname_spec='`$ECHO "X$soname_spec" | $Xsed -e "$delay_single_quote_subst"`' +postinstall_cmds='`$ECHO "X$postinstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' +postuninstall_cmds='`$ECHO "X$postuninstall_cmds" | $Xsed -e "$delay_single_quote_subst"`' +finish_cmds='`$ECHO "X$finish_cmds" | $Xsed -e "$delay_single_quote_subst"`' +finish_eval='`$ECHO "X$finish_eval" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_into_libs='`$ECHO "X$hardcode_into_libs" | $Xsed -e "$delay_single_quote_subst"`' +sys_lib_search_path_spec='`$ECHO "X$sys_lib_search_path_spec" | $Xsed -e "$delay_single_quote_subst"`' +sys_lib_dlsearch_path_spec='`$ECHO "X$sys_lib_dlsearch_path_spec" | $Xsed -e "$delay_single_quote_subst"`' +hardcode_action='`$ECHO "X$hardcode_action" | $Xsed -e "$delay_single_quote_subst"`' +enable_dlopen='`$ECHO "X$enable_dlopen" | $Xsed -e "$delay_single_quote_subst"`' +enable_dlopen_self='`$ECHO "X$enable_dlopen_self" | $Xsed -e "$delay_single_quote_subst"`' +enable_dlopen_self_static='`$ECHO "X$enable_dlopen_self_static" | $Xsed -e "$delay_single_quote_subst"`' +old_striplib='`$ECHO "X$old_striplib" | $Xsed -e "$delay_single_quote_subst"`' +striplib='`$ECHO "X$striplib" | $Xsed -e "$delay_single_quote_subst"`' + +LTCC='$LTCC' +LTCFLAGS='$LTCFLAGS' +compiler='$compiler_DEFAULT' + +# Quote evaled strings. +for var in SED \ +GREP \ +EGREP \ +FGREP \ +LD \ +NM \ +LN_S \ +lt_SP2NL \ +lt_NL2SP \ +reload_flag \ +OBJDUMP \ +deplibs_check_method \ +file_magic_cmd \ +AR \ +AR_FLAGS \ +STRIP \ +RANLIB \ +CC \ +CFLAGS \ +compiler \ +lt_cv_sys_global_symbol_pipe \ +lt_cv_sys_global_symbol_to_cdecl \ +lt_cv_sys_global_symbol_to_c_name_address \ +lt_cv_sys_global_symbol_to_c_name_address_lib_prefix \ +SHELL \ +ECHO \ +lt_prog_compiler_no_builtin_flag \ +lt_prog_compiler_wl \ +lt_prog_compiler_pic \ +lt_prog_compiler_static \ +lt_cv_prog_compiler_c_o \ +need_locks \ +DSYMUTIL \ +NMEDIT \ +LIPO \ +OTOOL \ +OTOOL64 \ +shrext_cmds \ +export_dynamic_flag_spec \ +whole_archive_flag_spec \ +compiler_needs_object \ +with_gnu_ld \ +allow_undefined_flag \ +no_undefined_flag \ +hardcode_libdir_flag_spec \ +hardcode_libdir_flag_spec_ld \ +hardcode_libdir_separator \ +fix_srcfile_path \ +exclude_expsyms \ +include_expsyms \ +file_list_spec \ +variables_saved_for_relink \ +libname_spec \ +library_names_spec \ +soname_spec \ +finish_eval \ +old_striplib \ +striplib; do + case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$sed_quote_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +# Double-quote double-evaled strings. +for var in reload_cmds \ +old_postinstall_cmds \ +old_postuninstall_cmds \ +old_archive_cmds \ +extract_expsyms_cmds \ +old_archive_from_new_cmds \ +old_archive_from_expsyms_cmds \ +archive_cmds \ +archive_expsym_cmds \ +module_cmds \ +module_expsym_cmds \ +export_symbols_cmds \ +prelink_cmds \ +postinstall_cmds \ +postuninstall_cmds \ +finish_cmds \ +sys_lib_search_path_spec \ +sys_lib_dlsearch_path_spec; do + case \`eval \\\\\$ECHO "X\\\\\$\$var"\` in + *[\\\\\\\`\\"\\\$]*) + eval "lt_\$var=\\\\\\"\\\`\\\$ECHO \\"X\\\$\$var\\" | \\\$Xsed -e \\"\\\$double_quote_subst\\" -e \\"\\\$sed_quote_subst\\" -e \\"\\\$delay_variable_subst\\"\\\`\\\\\\"" + ;; + *) + eval "lt_\$var=\\\\\\"\\\$\$var\\\\\\"" + ;; + esac +done + +# Fix-up fallback echo if it was mangled by the above quoting rules. +case \$lt_ECHO in +*'\\\$0 --fallback-echo"') lt_ECHO=\`\$ECHO "X\$lt_ECHO" | \$Xsed -e 's/\\\\\\\\\\\\\\\$0 --fallback-echo"\$/\$0 --fallback-echo"/'\` + ;; +esac + +ac_aux_dir='$ac_aux_dir' +xsi_shell='$xsi_shell' +lt_shell_append='$lt_shell_append' + +# See if we are running on zsh, and set the options which allow our +# commands through without removal of \ escapes INIT. +if test -n "\${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST +fi + + + PACKAGE='$PACKAGE' + VERSION='$VERSION' + TIMESTAMP='$TIMESTAMP' + RM='$RM' + ofile='$ofile' + + + + +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + +# Handling of arguments. +for ac_config_target in $ac_config_targets +do + case $ac_config_target in + "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; + "libtool") CONFIG_COMMANDS="$CONFIG_COMMANDS libtool" ;; + "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; + "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; + + *) { { $as_echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 +$as_echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; + esac +done + + +# If the user did not use the arguments to specify the items to instantiate, +# then the envvar interface is used. Set only those that are not. +# We use the long form for the default assignment because of an extremely +# bizarre bug on SunOS 4.1.3. +if $ac_need_defaults; then + test "${CONFIG_FILES+set}" = set || CONFIG_FILES=$config_files + test "${CONFIG_HEADERS+set}" = set || CONFIG_HEADERS=$config_headers + test "${CONFIG_COMMANDS+set}" = set || CONFIG_COMMANDS=$config_commands +fi + +# Have a temporary directory for convenience. Make it in the build tree +# simply because there is no reason against having it here, and in addition, +# creating and moving files from /tmp can sometimes cause problems. +# Hook for its removal unless debugging. +# Note that there is a small window in which the directory will not be cleaned: +# after its creation but before its name has been assigned to `$tmp'. +$debug || +{ + tmp= + trap 'exit_status=$? + { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status +' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 +} +# Create a (secure) tmp directory for tmp files. + +{ + tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" +} || +{ + tmp=./conf$$-$RANDOM + (umask 077 && mkdir "$tmp") +} || +{ + $as_echo "$as_me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } +} + +# Set up the scripts for CONFIG_FILES section. +# No need to generate them if there are no CONFIG_FILES. +# This happens for instance with `./config.status config.h'. +if test -n "$CONFIG_FILES"; then + + +ac_cr='
' +ac_cs_awk_cr=`$AWK 'BEGIN { print "a\rb" }' </dev/null 2>/dev/null` +if test "$ac_cs_awk_cr" = "a${ac_cr}b"; then + ac_cs_awk_cr='\\r' +else + ac_cs_awk_cr=$ac_cr +fi + +echo 'BEGIN {' >"$tmp/subs1.awk" && +_ACEOF + + +{ + echo "cat >conf$$subs.awk <<_ACEOF" && + echo "$ac_subst_vars" | sed 's/.*/&!$&$ac_delim/' && + echo "_ACEOF" +} >conf$$subs.sh || + { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } +ac_delim_num=`echo "$ac_subst_vars" | grep -c '$'` +ac_delim='%!_!# ' +for ac_last_try in false false false false false :; do + . ./conf$$subs.sh || + { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } + + ac_delim_n=`sed -n "s/.*$ac_delim\$/X/p" conf$$subs.awk | grep -c X` + if test $ac_delim_n = $ac_delim_num; then + break + elif $ac_last_try; then + { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 +$as_echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done +rm -f conf$$subs.sh + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +cat >>"\$tmp/subs1.awk" <<\\_ACAWK && +_ACEOF +sed -n ' +h +s/^/S["/; s/!.*/"]=/ +p +g +s/^[^!]*!// +:repl +t repl +s/'"$ac_delim"'$// +t delim +:nl +h +s/\(.\{148\}\).*/\1/ +t more1 +s/["\\]/\\&/g; s/^/"/; s/$/\\n"\\/ +p +n +b repl +:more1 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t nl +:delim +h +s/\(.\{148\}\).*/\1/ +t more2 +s/["\\]/\\&/g; s/^/"/; s/$/"/ +p +b +:more2 +s/["\\]/\\&/g; s/^/"/; s/$/"\\/ +p +g +s/.\{148\}// +t delim +' <conf$$subs.awk | sed ' +/^[^""]/{ + N + s/\n// +} +' >>$CONFIG_STATUS || ac_write_fail=1 +rm -f conf$$subs.awk +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +_ACAWK +cat >>"\$tmp/subs1.awk" <<_ACAWK && + for (key in S) S_is_set[key] = 1 + FS = "" + +} +{ + line = $ 0 + nfields = split(line, field, "@") + substed = 0 + len = length(field[1]) + for (i = 2; i < nfields; i++) { + key = field[i] + keylen = length(key) + if (S_is_set[key]) { + value = S[key] + line = substr(line, 1, len) "" value "" substr(line, len + keylen + 3) + len += length(value) + length(field[++i]) + substed = 1 + } else + len += 1 + keylen + } + + print line +} + +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +if sed "s/$ac_cr//" < /dev/null > /dev/null 2>&1; then + sed "s/$ac_cr\$//; s/$ac_cr/$ac_cs_awk_cr/g" +else + cat +fi < "$tmp/subs1.awk" > "$tmp/subs.awk" \ + || { { $as_echo "$as_me:$LINENO: error: could not setup config files machinery" >&5 +$as_echo "$as_me: error: could not setup config files machinery" >&2;} + { (exit 1); exit 1; }; } +_ACEOF + +# VPATH may cause trouble with some makes, so we remove $(srcdir), +# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +# trailing colons and then remove the whole line if VPATH becomes empty +# (actually we leave an empty line to preserve line numbers). +if test "x$srcdir" = x.; then + ac_vpsub='/^[ ]*VPATH[ ]*=/{ +s/:*\$(srcdir):*/:/ +s/:*\${srcdir}:*/:/ +s/:*@srcdir@:*/:/ +s/^\([^=]*=[ ]*\):*/\1/ +s/:*$// +s/^[^=]*=[ ]*$// +}' +fi + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +fi # test -n "$CONFIG_FILES" + +# Set up the scripts for CONFIG_HEADERS section. +# No need to generate them if there are no CONFIG_HEADERS. +# This happens for instance with `./config.status Makefile'. +if test -n "$CONFIG_HEADERS"; then +cat >"$tmp/defines.awk" <<\_ACAWK || +BEGIN { +_ACEOF + +# Transform confdefs.h into an awk script `defines.awk', embedded as +# here-document in config.status, that substitutes the proper values into +# config.h.in to produce config.h. + +# Create a delimiter string that does not exist in confdefs.h, to ease +# handling of long lines. +ac_delim='%!_!# ' +for ac_last_try in false false :; do + ac_t=`sed -n "/$ac_delim/p" confdefs.h` + if test -z "$ac_t"; then + break + elif $ac_last_try; then + { { $as_echo "$as_me:$LINENO: error: could not make $CONFIG_HEADERS" >&5 +$as_echo "$as_me: error: could not make $CONFIG_HEADERS" >&2;} + { (exit 1); exit 1; }; } + else + ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +done + +# For the awk script, D is an array of macro values keyed by name, +# likewise P contains macro parameters if any. Preserve backslash +# newline sequences. + +ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* +sed -n ' +s/.\{148\}/&'"$ac_delim"'/g +t rset +:rset +s/^[ ]*#[ ]*define[ ][ ]*/ / +t def +d +:def +s/\\$// +t bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3"/p +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2"/p +d +:bsnl +s/["\\]/\\&/g +s/^ \('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/P["\1"]="\2"\ +D["\1"]=" \3\\\\\\n"\\/p +t cont +s/^ \('"$ac_word_re"'\)[ ]*\(.*\)/D["\1"]=" \2\\\\\\n"\\/p +t cont +d +:cont +n +s/.\{148\}/&'"$ac_delim"'/g +t clear +:clear +s/\\$// +t bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/"/p +d +:bsnlc +s/["\\]/\\&/g; s/^/"/; s/$/\\\\\\n"\\/p +b cont +' <confdefs.h | sed ' +s/'"$ac_delim"'/"\\\ +"/g' >>$CONFIG_STATUS || ac_write_fail=1 + +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + for (key in D) D_is_set[key] = 1 + FS = "" +} +/^[\t ]*#[\t ]*(define|undef)[\t ]+$ac_word_re([\t (]|\$)/ { + line = \$ 0 + split(line, arg, " ") + if (arg[1] == "#") { + defundef = arg[2] + mac1 = arg[3] + } else { + defundef = substr(arg[1], 2) + mac1 = arg[2] + } + split(mac1, mac2, "(") #) + macro = mac2[1] + prefix = substr(line, 1, index(line, defundef) - 1) + if (D_is_set[macro]) { + # Preserve the white space surrounding the "#". + print prefix "define", macro P[macro] D[macro] + next + } else { + # Replace #undef with comments. This is necessary, for example, + # in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. + if (defundef == "undef") { + print "/*", prefix defundef, macro, "*/" + next + } + } +} +{ print } +_ACAWK +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 + { { $as_echo "$as_me:$LINENO: error: could not setup config headers machinery" >&5 +$as_echo "$as_me: error: could not setup config headers machinery" >&2;} + { (exit 1); exit 1; }; } +fi # test -n "$CONFIG_HEADERS" + + +eval set X " :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS" +shift +for ac_tag +do + case $ac_tag in + :[FHLC]) ac_mode=$ac_tag; continue;; + esac + case $ac_mode$ac_tag in + :[FHL]*:*);; + :L* | :C*:*) { { $as_echo "$as_me:$LINENO: error: invalid tag $ac_tag" >&5 +$as_echo "$as_me: error: invalid tag $ac_tag" >&2;} + { (exit 1); exit 1; }; };; + :[FH]-) ac_tag=-:-;; + :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; + esac + ac_save_IFS=$IFS + IFS=: + set x $ac_tag + IFS=$ac_save_IFS + shift + ac_file=$1 + shift + + case $ac_mode in + :L) ac_source=$1;; + :[FH]) + ac_file_inputs= + for ac_f + do + case $ac_f in + -) ac_f="$tmp/stdin";; + *) # Look for the file first in the build tree, then in the source tree + # (if the path is not absolute). The absolute path cannot be DOS-style, + # because $ac_f cannot contain `:'. + test -f "$ac_f" || + case $ac_f in + [\\/$]*) false;; + *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; + esac || + { { $as_echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 +$as_echo "$as_me: error: cannot find input file: $ac_f" >&2;} + { (exit 1); exit 1; }; };; + esac + case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac + ac_file_inputs="$ac_file_inputs '$ac_f'" + done + + # Let's still pretend it is `configure' which instantiates (i.e., don't + # use $as_me), people would be surprised to read: + # /* config.h. Generated by config.status. */ + configure_input='Generated from '` + $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g' + `' by configure.' + if test x"$ac_file" != x-; then + configure_input="$ac_file. $configure_input" + { $as_echo "$as_me:$LINENO: creating $ac_file" >&5 +$as_echo "$as_me: creating $ac_file" >&6;} + fi + # Neutralize special characters interpreted by sed in replacement strings. + case $configure_input in #( + *\&* | *\|* | *\\* ) + ac_sed_conf_input=`$as_echo "$configure_input" | + sed 's/[\\\\&|]/\\\\&/g'`;; #( + *) ac_sed_conf_input=$configure_input;; + esac + + case $ac_tag in + *:-:* | *:-) cat >"$tmp/stdin" \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } ;; + esac + ;; + esac + + ac_dir=`$as_dirname -- "$ac_file" || +$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ + X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$ac_file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + { as_dir="$ac_dir" + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } + ac_builddir=. + +case "$ac_dir" in +.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; +*) + ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'` + # A ".." for each directory in $ac_dir_suffix. + ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'` + case $ac_top_builddir_sub in + "") ac_top_builddir_sub=. ac_top_build_prefix= ;; + *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; + esac ;; +esac +ac_abs_top_builddir=$ac_pwd +ac_abs_builddir=$ac_pwd$ac_dir_suffix +# for backward compatibility: +ac_top_builddir=$ac_top_build_prefix + +case $srcdir in + .) # We are building in place. + ac_srcdir=. + ac_top_srcdir=$ac_top_builddir_sub + ac_abs_top_srcdir=$ac_pwd ;; + [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; + ac_top_srcdir=$srcdir + ac_abs_top_srcdir=$srcdir ;; + *) # Relative name. + ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix + ac_top_srcdir=$ac_top_build_prefix$srcdir + ac_abs_top_srcdir=$ac_pwd/$srcdir ;; +esac +ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + + + case $ac_mode in + :F) + # + # CONFIG_FILE + # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; + *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac + ac_MKDIR_P=$MKDIR_P + case $MKDIR_P in + [\\/$]* | ?:[\\/]* ) ;; + */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;; + esac +_ACEOF + +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +# If the template does not know about datarootdir, expand it. +# FIXME: This hack should be removed a few years after 2.60. +ac_datarootdir_hack=; ac_datarootdir_seen= + +ac_sed_dataroot=' +/datarootdir/ { + p + q +} +/@datadir@/p +/@docdir@/p +/@infodir@/p +/@localedir@/p +/@mandir@/p +' +case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in +*datarootdir*) ac_datarootdir_seen=yes;; +*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) + { $as_echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 +$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} +_ACEOF +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 + ac_datarootdir_hack=' + s&@datadir@&$datadir&g + s&@docdir@&$docdir&g + s&@infodir@&$infodir&g + s&@localedir@&$localedir&g + s&@mandir@&$mandir&g + s&\\\${datarootdir}&$datarootdir&g' ;; +esac +_ACEOF + +# Neutralize VPATH when `$srcdir' = `.'. +# Shell code in configure.ac might set extrasub. +# FIXME: do we really want to maintain this feature? +cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1 +ac_sed_extra="$ac_vpsub +$extrasub +_ACEOF +cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1 +:t +/@[a-zA-Z_][a-zA-Z_0-9]*@/!b +s|@configure_input@|$ac_sed_conf_input|;t t +s&@top_builddir@&$ac_top_builddir_sub&;t t +s&@top_build_prefix@&$ac_top_build_prefix&;t t +s&@srcdir@&$ac_srcdir&;t t +s&@abs_srcdir@&$ac_abs_srcdir&;t t +s&@top_srcdir@&$ac_top_srcdir&;t t +s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t +s&@builddir@&$ac_builddir&;t t +s&@abs_builddir@&$ac_abs_builddir&;t t +s&@abs_top_builddir@&$ac_abs_top_builddir&;t t +s&@INSTALL@&$ac_INSTALL&;t t +s&@MKDIR_P@&$ac_MKDIR_P&;t t +$ac_datarootdir_hack +" +eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$tmp/subs.awk" >$tmp/out \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } + +test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && + { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && + { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && + { $as_echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined." >&5 +$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' +which seems to be undefined. Please make sure it is defined." >&2;} + + rm -f "$tmp/stdin" + case $ac_file in + -) cat "$tmp/out" && rm -f "$tmp/out";; + *) rm -f "$ac_file" && mv "$tmp/out" "$ac_file";; + esac \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } + ;; + :H) + # + # CONFIG_HEADER + # + if test x"$ac_file" != x-; then + { + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" + } >"$tmp/config.h" \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } + if diff "$ac_file" "$tmp/config.h" >/dev/null 2>&1; then + { $as_echo "$as_me:$LINENO: $ac_file is unchanged" >&5 +$as_echo "$as_me: $ac_file is unchanged" >&6;} + else + rm -f "$ac_file" + mv "$tmp/config.h" "$ac_file" \ + || { { $as_echo "$as_me:$LINENO: error: could not create $ac_file" >&5 +$as_echo "$as_me: error: could not create $ac_file" >&2;} + { (exit 1); exit 1; }; } + fi + else + $as_echo "/* $configure_input */" \ + && eval '$AWK -f "$tmp/defines.awk"' "$ac_file_inputs" \ + || { { $as_echo "$as_me:$LINENO: error: could not create -" >&5 +$as_echo "$as_me: error: could not create -" >&2;} + { (exit 1); exit 1; }; } + fi +# Compute "$ac_file"'s index in $config_headers. +_am_arg="$ac_file" +_am_stamp_count=1 +for _am_header in $config_headers :; do + case $_am_header in + $_am_arg | $_am_arg:* ) + break ;; + * ) + _am_stamp_count=`expr $_am_stamp_count + 1` ;; + esac +done +echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" || +$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$_am_arg" : 'X\(//\)[^/]' \| \ + X"$_am_arg" : 'X\(//\)$' \| \ + X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$_am_arg" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'`/stamp-h$_am_stamp_count + ;; + + :C) { $as_echo "$as_me:$LINENO: executing $ac_file commands" >&5 +$as_echo "$as_me: executing $ac_file commands" >&6;} + ;; + esac + + + case $ac_file$ac_mode in + "depfiles":C) test x"$AMDEP_TRUE" != x"" || # Autoconf 2.62 quotes --file arguments for eval, but not when files +# are listed without --file. Let's play safe and only enable the eval +# if we detect the quoting. +case $CONFIG_FILES in +*\'*) eval set x "$CONFIG_FILES" ;; +*) set x $CONFIG_FILES ;; +esac +shift +for mf +do + # Strip MF so we end up with the name of the file. + mf=`echo "$mf" | sed -e 's/:.*$//'` + # Check whether this is an Automake generated Makefile or not. + # We used to match only the files named `Makefile.in', but + # some people rename them; so instead we look at the file content. + # Grep'ing the first line is not enough: some people post-process + # each Makefile.in and add a new line on top of each file to say so. + # Grep'ing the whole file is not good either: AIX grep has a line + # limit of 2048, but all sed's we know have understand at least 4000. + if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then + dirpart=`$as_dirname -- "$mf" || +$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$mf" : 'X\(//\)[^/]' \| \ + X"$mf" : 'X\(//\)$' \| \ + X"$mf" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$mf" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + else + continue + fi + # Extract the definition of DEPDIR, am__include, and am__quote + # from the Makefile without running `make'. + DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` + test -z "$DEPDIR" && continue + am__include=`sed -n 's/^am__include = //p' < "$mf"` + test -z "am__include" && continue + am__quote=`sed -n 's/^am__quote = //p' < "$mf"` + # When using ansi2knr, U may be empty or an underscore; expand it + U=`sed -n 's/^U = //p' < "$mf"` + # Find all dependency output files, they are included files with + # $(DEPDIR) in their names. We invoke sed twice because it is the + # simplest approach to changing $(DEPDIR) to its actual value in the + # expansion. + for file in `sed -n " + s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ + sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do + # Make sure the directory exists. + test -f "$dirpart/$file" && continue + fdir=`$as_dirname -- "$file" || +$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$file" : 'X\(//\)[^/]' \| \ + X"$file" : 'X\(//\)$' \| \ + X"$file" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$file" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + { as_dir=$dirpart/$fdir + case $as_dir in #( + -*) as_dir=./$as_dir;; + esac + test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= + while :; do + case $as_dir in #( + *\'*) as_qdir=`$as_echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #'( + *) as_qdir=$as_dir;; + esac + as_dirs="'$as_qdir' $as_dirs" + as_dir=`$as_dirname -- "$as_dir" || +$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ + X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || +$as_echo X"$as_dir" | + sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ + s//\1/ + q + } + /^X\(\/\/\)[^/].*/{ + s//\1/ + q + } + /^X\(\/\/\)$/{ + s//\1/ + q + } + /^X\(\/\).*/{ + s//\1/ + q + } + s/.*/./; q'` + test -d "$as_dir" && break + done + test -z "$as_dirs" || eval "mkdir $as_dirs" + } || test -d "$as_dir" || { { $as_echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 +$as_echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } + # echo "creating $dirpart/$file" + echo '# dummy' > "$dirpart/$file" + done +done + ;; + "libtool":C) + + # See if we are running on zsh, and set the options which allow our + # commands through without removal of \ escapes. + if test -n "${ZSH_VERSION+set}" ; then + setopt NO_GLOB_SUBST + fi + + cfgfile="${ofile}T" + trap "$RM \"$cfgfile\"; exit 1" 1 2 15 + $RM "$cfgfile" + + cat <<_LT_EOF >> "$cfgfile" +#! $SHELL + +# `$ECHO "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $as_me ($PACKAGE$TIMESTAMP) $VERSION +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, +# 2006, 2007, 2008 Free Software Foundation, Inc. +# Written by Gordon Matzigkeit, 1996 +# +# This file is part of GNU Libtool. +# +# GNU Libtool is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# As a special exception to the GNU General Public License, +# if you distribute this file as part of a program or library that +# is built using GNU Libtool, you may include this file under the +# same distribution terms that you use for the rest of that program. +# +# GNU Libtool is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with GNU Libtool; see the file COPYING. If not, a copy +# can be downloaded from http://www.gnu.org/licenses/gpl.html, or +# obtained by writing to the Free Software Foundation, Inc., +# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + + +# The names of the tagged configurations supported by this script. +available_tags="" + +# ### BEGIN LIBTOOL CONFIG + +# Which release of libtool.m4 was used? +macro_version=$macro_version +macro_revision=$macro_revision + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# What type of objects to build. +pic_mode=$pic_mode + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host +host_os=$host_os + +# The build system. +build_alias=$build_alias +build=$build +build_os=$build_os + +# A sed program that does not truncate output. +SED=$lt_SED + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="\$SED -e 1s/^X//" + +# A grep program that handles long lines. +GREP=$lt_GREP + +# An ERE matcher. +EGREP=$lt_EGREP + +# A literal string matcher. +FGREP=$lt_FGREP + +# A BSD- or MS-compatible name lister. +NM=$lt_NM + +# Whether we need soft or hard links. +LN_S=$lt_LN_S + +# What is the maximum length of a command? +max_cmd_len=$max_cmd_len + +# Object file suffix (normally "o"). +objext=$ac_objext + +# Executable file suffix (normally ""). +exeext=$exeext + +# whether the shell understands "unset". +lt_unset=$lt_unset + +# turn spaces into newlines. +SP2NL=$lt_lt_SP2NL + +# turn newlines into spaces. +NL2SP=$lt_lt_NL2SP + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# An object symbol dumper. +OBJDUMP=$lt_OBJDUMP + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == "file_magic". +file_magic_cmd=$lt_file_magic_cmd + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# A symbol stripping program. +STRIP=$lt_STRIP + +# Commands used to install an old-style archive. +RANLIB=$lt_RANLIB +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# A C compiler. +LTCC=$lt_CC + +# LTCC compiler flags. +LTCFLAGS=$lt_CFLAGS + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration. +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair. +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# Transform the output of nm in a C name address pair when lib prefix is needed. +global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# An echo program that does not interpret backslashes. +ECHO=$lt_ECHO + +# Used to examine libraries when file_magic_cmd begins with "file". +MAGIC_CMD=$MAGIC_CMD + +# Must we lock files when doing compilation? +need_locks=$lt_need_locks + +# Tool to manipulate archived DWARF debug symbol files on Mac OS X. +DSYMUTIL=$lt_DSYMUTIL + +# Tool to change global to local symbols on Mac OS X. +NMEDIT=$lt_NMEDIT + +# Tool to manipulate fat objects and archives on Mac OS X. +LIPO=$lt_LIPO + +# ldd/readelf like tool for Mach-O binaries on Mac OS X. +OTOOL=$lt_OTOOL + +# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4. +OTOOL64=$lt_OTOOL64 + +# Old archive suffix (normally "a"). +libext=$libext + +# Shared library suffix (normally ".so"). +shrext_cmds=$lt_shrext_cmds + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at link time. +variables_saved_for_relink=$lt_variables_saved_for_relink + +# Do we need the "lib" prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Library versioning type. +version_type=$version_type + +# Shared library runtime path variable. +runpath_var=$runpath_var + +# Shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Command to use after installation of a shared archive. +postinstall_cmds=$lt_postinstall_cmds + +# Command to use after uninstallation of a shared archive. +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# As "finish_cmds", except a single script fragment to be evaled but +# not shown. +finish_eval=$lt_finish_eval + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Compile-time system search path for libraries. +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries. +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + + +# The linker used to build libraries. +LD=$lt_LD + +# Commands used to build an old-style archive. +old_archive_cmds=$lt_old_archive_cmds + +# A language specific compiler. +CC=$lt_compiler + +# Is the compiler the GNU compiler? +with_gcc=$GCC + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag + +# How to pass a linker flag through the compiler. +wl=$lt_lt_prog_compiler_wl + +# Additional compiler flags for building library objects. +pic_flag=$lt_lt_prog_compiler_pic + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_lt_prog_compiler_static + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_lt_cv_prog_compiler_c_o + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$archive_cmds_need_lc + +# Whether or not to disallow shared libs when runtime libs are static. +allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_export_dynamic_flag_spec + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_whole_archive_flag_spec + +# Whether the compiler copes with passing no objects directly. +compiler_needs_object=$lt_compiler_needs_object + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_old_archive_from_new_cmds + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds + +# Commands used to build a shared archive. +archive_cmds=$lt_archive_cmds +archive_expsym_cmds=$lt_archive_expsym_cmds + +# Commands used to build a loadable module if different from building +# a shared archive. +module_cmds=$lt_module_cmds +module_expsym_cmds=$lt_module_expsym_cmds + +# Whether we are building with GNU ld or not. +with_gnu_ld=$lt_with_gnu_ld + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_allow_undefined_flag + +# Flag that enforces no undefined symbols. +no_undefined_flag=$lt_no_undefined_flag + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist +hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec + +# If ld is used when linking, flag to hardcode \$libdir into a binary +# during linking. This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld + +# Whether we need a single "-rpath" flag with a separated argument. +hardcode_libdir_separator=$lt_hardcode_libdir_separator + +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary. +hardcode_direct=$hardcode_direct + +# Set to "yes" if using DIR/libNAME\${shared_ext} during linking hardcodes +# DIR into the resulting binary and the resulting library dependency is +# "absolute",i.e impossible to change by setting \${shlibpath_var} if the +# library is relocated. +hardcode_direct_absolute=$hardcode_direct_absolute + +# Set to "yes" if using the -LDIR flag during linking hardcodes DIR +# into the resulting binary. +hardcode_minus_L=$hardcode_minus_L + +# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR +# into the resulting binary. +hardcode_shlibpath_var=$hardcode_shlibpath_var + +# Set to "yes" if building a shared library automatically hardcodes DIR +# into the library and all subsequent libraries and executables linked +# against it. +hardcode_automatic=$hardcode_automatic + +# Set to yes if linker adds runtime paths of dependent libraries +# to runtime path list. +inherit_rpath=$inherit_rpath + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$link_all_deplibs + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path=$lt_fix_srcfile_path + +# Set to "yes" if exported symbols are required. +always_export_symbols=$always_export_symbols + +# The commands to list exported symbols. +export_symbols_cmds=$lt_export_symbols_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_exclude_expsyms + +# Symbols that must always be exported. +include_expsyms=$lt_include_expsyms + +# Commands necessary for linking programs (against libraries) with templates. +prelink_cmds=$lt_prelink_cmds + +# Specify filename containing input files. +file_list_spec=$lt_file_list_spec + +# How to hardcode a shared library path into an executable. +hardcode_action=$hardcode_action + +# ### END LIBTOOL CONFIG + +_LT_EOF + + case $host_os in + aix3*) + cat <<\_LT_EOF >> "$cfgfile" +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +_LT_EOF + ;; + esac + + +ltmain="$ac_aux_dir/ltmain.sh" + + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '/^# Generated shell functions inserted here/q' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + case $xsi_shell in + yes) + cat << \_LT_EOF >> "$cfgfile" + +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac +} + +# func_basename file +func_basename () +{ + func_basename_result="${1##*/}" +} + +# func_dirname_and_basename file append nondir_replacement +# perform func_basename and func_dirname in a single function +# call: +# dirname: Compute the dirname of FILE. If nonempty, +# add APPEND to the result, otherwise set result +# to NONDIR_REPLACEMENT. +# value returned in "$func_dirname_result" +# basename: Compute filename of FILE. +# value retuned in "$func_basename_result" +# Implementation must be kept synchronized with func_dirname +# and func_basename. For efficiency, we do not delegate to +# those functions but instead duplicate the functionality here. +func_dirname_and_basename () +{ + case ${1} in + */*) func_dirname_result="${1%/*}${2}" ;; + * ) func_dirname_result="${3}" ;; + esac + func_basename_result="${1##*/}" +} + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +func_stripname () +{ + # pdksh 5.2.14 does not do ${X%$Y} correctly if both X and Y are + # positional parameters, so assign one to ordinary parameter first. + func_stripname_result=${3} + func_stripname_result=${func_stripname_result#"${1}"} + func_stripname_result=${func_stripname_result%"${2}"} +} + +# func_opt_split +func_opt_split () +{ + func_opt_split_opt=${1%%=*} + func_opt_split_arg=${1#*=} +} + +# func_lo2o object +func_lo2o () +{ + case ${1} in + *.lo) func_lo2o_result=${1%.lo}.${objext} ;; + *) func_lo2o_result=${1} ;; + esac +} + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=${1%.*}.lo +} + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=$(( $* )) +} + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=${#1} +} + +_LT_EOF + ;; + *) # Bourne compatible functions. + cat << \_LT_EOF >> "$cfgfile" + +# func_dirname file append nondir_replacement +# Compute the dirname of FILE. If nonempty, add APPEND to the result, +# otherwise set result to NONDIR_REPLACEMENT. +func_dirname () +{ + # Extract subdirectory from the argument. + func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"` + if test "X$func_dirname_result" = "X${1}"; then + func_dirname_result="${3}" + else + func_dirname_result="$func_dirname_result${2}" + fi +} + +# func_basename file +func_basename () +{ + func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"` +} + + +# func_stripname prefix suffix name +# strip PREFIX and SUFFIX off of NAME. +# PREFIX and SUFFIX must not contain globbing or regex special +# characters, hashes, percent signs, but SUFFIX may contain a leading +# dot (in which case that matches only a dot). +# func_strip_suffix prefix name +func_stripname () +{ + case ${2} in + .*) func_stripname_result=`$ECHO "X${3}" \ + | $Xsed -e "s%^${1}%%" -e "s%\\\\${2}\$%%"`;; + *) func_stripname_result=`$ECHO "X${3}" \ + | $Xsed -e "s%^${1}%%" -e "s%${2}\$%%"`;; + esac +} + +# sed scripts: +my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q' +my_sed_long_arg='1s/^-[^=]*=//' + +# func_opt_split +func_opt_split () +{ + func_opt_split_opt=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_opt"` + func_opt_split_arg=`$ECHO "X${1}" | $Xsed -e "$my_sed_long_arg"` +} + +# func_lo2o object +func_lo2o () +{ + func_lo2o_result=`$ECHO "X${1}" | $Xsed -e "$lo2o"` +} + +# func_xform libobj-or-source +func_xform () +{ + func_xform_result=`$ECHO "X${1}" | $Xsed -e 's/\.[^.]*$/.lo/'` +} + +# func_arith arithmetic-term... +func_arith () +{ + func_arith_result=`expr "$@"` +} + +# func_len string +# STRING may not start with a hyphen. +func_len () +{ + func_len_result=`expr "$1" : ".*" 2>/dev/null || echo $max_cmd_len` +} + +_LT_EOF +esac + +case $lt_shell_append in + yes) + cat << \_LT_EOF >> "$cfgfile" + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "$1+=\$2" +} +_LT_EOF + ;; + *) + cat << \_LT_EOF >> "$cfgfile" + +# func_append var value +# Append VALUE to the end of shell variable VAR. +func_append () +{ + eval "$1=\$$1\$2" +} + +_LT_EOF + ;; + esac + + + sed -n '/^# Generated shell functions inserted here/,$p' "$ltmain" >> "$cfgfile" \ + || (rm -f "$cfgfile"; exit 1) + + mv -f "$cfgfile" "$ofile" || + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" + + ;; + + esac +done # for ac_tag + + +{ (exit 0); exit 0; } +_ACEOF +chmod +x $CONFIG_STATUS +ac_clean_files=$ac_clean_files_save + +test $ac_write_fail = 0 || + { { $as_echo "$as_me:$LINENO: error: write failure creating $CONFIG_STATUS" >&5 +$as_echo "$as_me: error: write failure creating $CONFIG_STATUS" >&2;} + { (exit 1); exit 1; }; } + + +# configure is writing to config.log, and then calls config.status. +# config.status does its own redirection, appending to config.log. +# Unfortunately, on DOS this fails, as config.log is still kept open +# by configure, so config.status won't be able to write to it; its +# output is simply discarded. So we exec the FD to /dev/null, +# effectively closing config.log, so it can be properly (re)opened and +# appended to by config.status. When coming back to configure, we +# need to make the FD available again. +if test "$no_create" != yes; then + ac_cs_success=: + ac_config_status_args= + test "$silent" = yes && + ac_config_status_args="$ac_config_status_args --quiet" + exec 5>/dev/null + $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false + exec 5>>config.log + # Use ||, not &&, to avoid exiting from the if with $? = 1, which + # would make configure fail if this is the last instruction. + $ac_cs_success || { (exit 1); exit 1; } +fi +if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then + { $as_echo "$as_me:$LINENO: WARNING: unrecognized options: $ac_unrecognized_opts" >&5 +$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;} +fi + diff --git a/Build/source/texk/one/configure.ac b/Build/source/texk/one/configure.ac new file mode 100644 index 00000000000..434259c4003 --- /dev/null +++ b/Build/source/texk/one/configure.ac @@ -0,0 +1,28 @@ +dnl +AC_INIT([bld-test-texk-one], [1.1], [peb@mppmu.mpg.de]) +AC_PREREQ([2.63]) +AC_CONFIG_SRCDIR([one.c]) +AC_CONFIG_AUX_DIR([../../build-aux]) +AC_CONFIG_MACRO_DIR([../../m4]) + +AM_INIT_AUTOMAKE([foreign dist-bzip2]) +AM_MAINTAINER_MODE + +LT_PREREQ([2.2.6]) +LT_INIT + +AC_CONFIG_HEADERS([config.h]) + +KPSE_ZLIB_FLAGS +KPSE_OBSDCOMPAT_FLAGS +KPSE_LIBPNG_FLAGS +KPSE_T1LIB_FLAGS +KPSE_FREETYPE2_FLAGS +KPSE_GD_FLAGS +KPSE_XPDF_FLAGS +KPSE_GRAPHITE_FLAGS +KPSE_TECKIT_FLAGS + +AC_CONFIG_FILES([Makefile]) + +AC_OUTPUT diff --git a/Build/source/texk/one/one.c b/Build/source/texk/one/one.c new file mode 100644 index 00000000000..49c3b6cb364 --- /dev/null +++ b/Build/source/texk/one/one.c @@ -0,0 +1,16 @@ +#ifdef HAVE_CONFIG_H +# include "config.h" +#endif + +#include <stdio.h> +#include <zlib.h> +#include <png.h> + +int +main (int argc, char **argv) +{ + printf ("Hello, this is progone," + " using libpng %d (" PNG_LIBPNG_VER_STRING ") and zlib %s (" ZLIB_VERSION ")\n", + png_access_version_number (), zlibVersion ()); + return 0; +} diff --git a/Build/source/texk/ps2pkm/Makefile.in.orig b/Build/source/texk/ps2pkm/Makefile.in.orig new file mode 100644 index 00000000000..0a55b49752f --- /dev/null +++ b/Build/source/texk/ps2pkm/Makefile.in.orig @@ -0,0 +1,64 @@ +# @configure_input@ +# Makefile for ps2pkm --te@dbs.uni-hannover.de. Public domain. +version = 1.5m + +kpse_include ../make/paths.mk +kpse_include ../make/common.mk +kpse_include ../make/programs.mk +prog_cflags = -DUNIX -DKPATHSEA + +libobj = arith.o curves.o fontfcn.o hints.o lines.o objects.o paths.o \ + regions.o scanfont.o spaces.o t1funcs.o t1info.o t1io.o \ + t1snap.o t1stub.o token.o type1.o util.o bstring.o basics.o +common_objects = pkout.o filenames.o +ps2pkobjs = $(libobj) ps2pk.o encoding.o pkout.o filenames.o +pk2bmobjs = pk2bm.o pkin.o +pfb2pfaobjs = pfb2pfa.o filenames.o basics.o +magobjs = mag.o basics.o + +program = ps2pk +programs = pfb2pfa mag pk2bm $(program) + +default all: $(programs) + +$(program): $(kpathsea) $(ps2pkobjs) + $(kpathsea_link) $(ps2pkobjs) $(LOADLIBES) +pk2bm: $(kpathsea) $(pk2bmobjs) + $(kpathsea_link) $(pk2bmobjs) $(LOADLIBES) +pfb2pfa: $(kpathsea) $(pfb2pfaobjs) + $(kpathsea_link) $(pfb2pfaobjs) $(LOADLIBES) +mag: $(kpathsea) $(magobjs) + $(kpathsea_link) $(magobjs) $(LOADLIBES) + +kpse_include ../make/tkpathsea.mk + +install: install-exec install-data +uninstall: uninstall-exec uninstall-data + +install-exec: $(programs) + $(SHELL) $(top_srcdir)/../mkinstalldirs $(bindir) + for p in $(programs); do $(INSTALL_LIBTOOL_PROG) $$p $(bindir); done +uninstall-exec: + for p in $(programs); do rm -f $(bindir)/$$p; done + +install-data: mag.1 pfb2pfa.1 pk2bm.1 ps2pk.1 + $(SHELL) $(top_srcdir)/../mkinstalldirs $(man1dir) + $(INSTALL_DATA) $(srcdir)/mag.1 $(man1dir)/mag.$(manext) + $(INSTALL_DATA) $(srcdir)/pfb2pfa.1 $(man1dir)/pfb2pfa.$(manext) + $(INSTALL_DATA) $(srcdir)/pk2bm.1 $(man1dir)/pk2bm.$(manext) + $(INSTALL_DATA) $(srcdir)/ps2pk.1 $(man1dir)/ps2pk.$(manext) +uninstall-data: + rm -f $(man1dir)/ps2pk.$(manext) $(man1dir)/pk2bm.$(manext) \ + $(man1dir)/pfb2pfa.$(manext) $(man1dir)/mag.$(manext) + +pre-dist-$(distname): +post-dist-$(distname): + +kpse_include ../make/dist.mk +kpse_include ../make/config.mk + +info dvi check: + +kpse_include ../make/clean.mk +kpse_include ../make/rdepend.mk +kpse_include depend.mk diff --git a/Build/source/texk/ps2pkm/ac/withenable.ac b/Build/source/texk/ps2pkm/ac/withenable.ac new file mode 100644 index 00000000000..72351528f8d --- /dev/null +++ b/Build/source/texk/ps2pkm/ac/withenable.ac @@ -0,0 +1,3 @@ +## texk/ps2pkm/ac/withenable.ac +## configure options and TL libraries required for ps2pkm +KPSE_WITH_PROG([ps2pkm], [kpathsea]) diff --git a/Build/source/texk/ps2pkm/configure.in.orig b/Build/source/texk/ps2pkm/configure.in.orig new file mode 100644 index 00000000000..4f750585481 --- /dev/null +++ b/Build/source/texk/ps2pkm/configure.in.orig @@ -0,0 +1,23 @@ +dnl Process this file with autoconf to produce a configure script. +AC_INIT(arith.c) + +AC_CONFIG_HEADERS([c-auto.h:c-auto.in], [date >stamp-auto]) + +AC_PROG_CC +AC_PROG_INSTALL +AC_PROG_MAKE_SET +AC_PROG_LN_S + +sinclude(../kpathsea/withenable.ac) +AC_CHECK_LIB(m, main) + +dnl Checks for header files. +AC_HEADER_STDC +AC_CHECK_HEADERS(fcntl.h) + +dnl Checks for library functions. +AC_FUNC_VPRINTF +AC_CHECK_FUNCS(memset) + +KPSE_CONFIG_FILES([Makefile]) +AC_OUTPUT diff --git a/Build/source/texk/seetexk/ac/withenable.ac b/Build/source/texk/seetexk/ac/withenable.ac new file mode 100644 index 00000000000..75c55e50ffc --- /dev/null +++ b/Build/source/texk/seetexk/ac/withenable.ac @@ -0,0 +1,3 @@ +## texk/seetexk/ac/withenable.ac +## configure options and TL libraries required for seetexk +KPSE_WITH_PROG([seetexk], [kpathsea]) diff --git a/Build/source/texk/tetex/Makefile.in.orig b/Build/source/texk/tetex/Makefile.in.orig new file mode 100644 index 00000000000..012005bf879 --- /dev/null +++ b/Build/source/texk/tetex/Makefile.in.orig @@ -0,0 +1,113 @@ +# $Id$ +# @configure_input@ +# Makefile for teTeX's extra scripts - te@dbs.uni-hannover.de. +# Public domain. + +kpse_include ../make/paths.mk +kpse_include ../make/common.mk +kpse_include ../make/programs.mk + +man5dir = $(mandir)/man5 + +SCRIPTS = \ + allcm allneeded dvi2fax dvired fmtutil fmtutil-sys fontinst \ + kpsetool kpsewhere ps2frag ps4pdf pslatex rubibtex rumakeindex \ + texconfig texconfig-dialog texconfig-sys \ + texlinks updmap updmap-sys + +contextmanpgs = \ + ctxtools makempy mptopdf pstopdf texfind texmfstart \ + pdftools texexec texfont textools texutil + +# The man pages for script packages such as thumbpdf and mkjobtexmf are +# copied here by hand; ctan2tl doesn't know how to handle this case. Help. +manpgs = \ + allcm allec allneeded dvi2fax dvired e2pall epstopdf fontinst \ + kpsetool kpsewhere mkjobtexmf mkocp mkofm ofm2opl opl2ofm otp2ocp outocp \ + ovf2ovp ovp2ovf ps2frag pslatex rubibtex rumakeindex texconfig \ + texdoctk thumbpdf ttf2afm updmap + +all: $(SCRIPTS) +default: all + +install: install-data install-exec + +# Auxiliary files. +install-data:: + $(SHELL) $(top_srcdir)/../mkinstalldirs $(man1dir) $(man5dir) $(texpooldir) $(texmf)/doc/tetex + for p in $(manpgs); do \ + $(INSTALL_DATA) $(srcdir)/$$p.man $(man1dir)/$$p.$(manext); \ + done + for p in $(contextmanpgs); do \ + $(INSTALL_DATA) $(srcdir)/context/$$p.man $(man1dir)/$$p.$(manext); \ + done + $(INSTALL_DATA) $(srcdir)/fmtutil.man $(man1dir)/fmtutil.1 + $(INSTALL_DATA) $(srcdir)/texlinks.man $(man1dir)/texlinks.1 + $(INSTALL_DATA) $(srcdir)/fmtutil.cnf.5 $(man5dir)/fmtutil.cnf.5 + $(INSTALL_DATA) $(srcdir)/updmap.cfg.5 $(man5dir)/updmap.cfg.5 + cd $(man1dir); rm -f allec.$(manext) texhash.$(manext) \ + lambda.$(manext) pdflatex.$(manext) kpsepath.$(manext) \ + kpsexpand.$(manext) mf-nowin.$(manext) ctangle.$(manext) \ + cweave.$(manext) odvicopy.$(manext) \ + odvitype.$(manext) texconfig-sys.$(manext) \ + updmap-sys.$(manext) mktexfmt.$(manext) fmtutil-sys.$(manext) + ln -s allcm.$(manext) $(man1dir)/allec.$(manext) + ln -s mktexlsr.$(manext) $(man1dir)/texhash.$(manext) + ln -s omega.$(manext) $(man1dir)/lambda.$(manext) + ln -s pdftex.$(manext) $(man1dir)/pdflatex.$(manext) + ln -s kpsetool.$(manext) $(man1dir)/kpsepath.$(manext) + ln -s kpsetool.$(manext) $(man1dir)/kpsexpand.$(manext) + ln -s mf.$(manext) $(man1dir)/mf-nowin.$(manext) + ln -s cweb.$(manext) $(man1dir)/ctangle.$(manext) + ln -s cweb.$(manext) $(man1dir)/cweave.$(manext) + ln -s dvicopy.$(manext) $(man1dir)/odvicopy.$(manext) + ln -s dvitype.$(manext) $(man1dir)/odvitype.$(manext) + ln -s texconfig.$(manext) $(man1dir)/texconfig-sys.$(manext) + ln -s updmap.$(manext) $(man1dir)/updmap-sys.$(manext) + ln -s fmtutil.$(manext) $(man1dir)/mktexfmt.$(manext) + ln -s fmtutil.$(manext) $(man1dir)/fmtutil-sys.$(manext) + for p in TETEXDOC.pdf TETEXDOC.ps TETEXDOC.dvi teTeX-FAQ; do \ + $(INSTALL_DATA) $(srcdir)/doc/$$p $(texmf)/doc/tetex; \ + done + $(SHELL) $(top_srcdir)/../mkinstalldirs $(texmf)/texconfig $(texmf)/texconfig/g $(texmf)/texconfig/v $(texmf)/texconfig/x + $(INSTALL_DATA) $(srcdir)/texmf/texconfig/g/generic $(texmf)/texconfig/g + $(INSTALL_DATA) $(srcdir)/texmf/texconfig/v/vt100 $(texmf)/texconfig/v + $(INSTALL_DATA) $(srcdir)/texmf/texconfig/x/xterm $(texmf)/texconfig/x + $(INSTALL_DATA) $(srcdir)/texmf/texconfig/README $(texmf)/texconfig + $(INSTALL_DATA) $(srcdir)/texmf/texconfig/generic $(texmf)/texconfig + $(INSTALL_SCRIPT) $(srcdir)/tcfmgr $(texmf)/texconfig/tcfmgr + $(INSTALL_DATA) $(srcdir)/tcfmgr.map $(texmf)/texconfig/tcfmgr.map + $(INSTALL_DATA) $(srcdir)/fmtutil.cnf $(texmf)/web2c/fmtutil.cnf + +install-exec: + -$(SHELL) $(srcdir)/../mkinstalldirs $(scriptdir) + for s in $(SCRIPTS); do \ + $(INSTALL_SCRIPT) $(srcdir)/$$s $(scriptdir)/$$s; \ + done + cd $(scriptdir) && rm -f allec kpsepath kpsexpand texhash; \ + ln -s allcm allec; \ + ln -s kpsetool kpsepath; \ + ln -s kpsetool kpsexpand; \ + ln -s mktexlsr texhash + cd $(scriptdir) && rm -f mktexfmt; ln -s fmtutil mktexfmt + +# +# This target is invoked by the top-level make, +# to create the per-format engine symlinks in $(bindir), +# after everything else is installed. We explicitly specify the +# fmtutil.cnf file to use for the sake of distro builds. Also, that way +# we don't have to run mktexlsr also. +run_texlinks = $(bindir)/texlinks -f $(web2cdir)/fmtutil.cnf +run-texlinks: + PATH="$(bindir):$(PATH)"; export PATH; $(run_texlinks) + +kpse_include ../make/clean.mk + +config.status: $(srcdir)/configure + $(SHELL) $(srcdir)/configure --no-create --verbose + +Makefile: $(srcdir)/Makefile.in config.status + $(SHELL) config.status + +depend: +check: diff --git a/Build/source/texk/tetex/configure.in.orig b/Build/source/texk/tetex/configure.in.orig new file mode 100644 index 00000000000..fcaf2e14755 --- /dev/null +++ b/Build/source/texk/tetex/configure.in.orig @@ -0,0 +1,12 @@ +dnl Process this file with autoconf to produce a configure script. +AC_INIT(texconfig) + +AC_PROG_CC +AC_PROG_INSTALL +AC_PROG_LN_S +AC_PROG_MAKE_SET + +sinclude(../kpathsea/withenable.ac) + +KPSE_CONFIG_FILES([Makefile]) +AC_OUTPUT diff --git a/Build/source/texk/tex4htk/Makefile.in.orig b/Build/source/texk/tex4htk/Makefile.in.orig new file mode 100644 index 00000000000..d7859d85fda --- /dev/null +++ b/Build/source/texk/tex4htk/Makefile.in.orig @@ -0,0 +1,79 @@ +# @configure_input@ +# Makefile for tex4ht in TeX Live. Public domain. +# Originally written by S. Rahtz. +version = 1.0 + +kpse_include ../make/paths.mk +kpse_include ../make/common.mk +kpse_include ../make/programs.mk +kpse_include ../make/texi.mk +prog_cflags = -DUNIX -DKPATHSEA -DNeedFunctionPrototypes + +objects = tex4ht.o t4ht.o + +programs = tex4ht t4ht +shell_scripts = htcontext htlatex htmex httex httexi htxelatex htxetex ht +perl_scripts = mk4ht + +default all: $(programs) + +t4ht: $(kpathsea) t4ht.o + $(kpathsea_link) t4ht.o $(LOADLIBES) + +tex4ht: $(kpathsea) tex4ht.o + $(kpathsea_link) tex4ht.o $(LOADLIBES) + +kpse_include ../make/tkpathsea.mk + +install: install-exec install-data + +uninstall: uninstall-exec uninstall-data + +install-exec: all + $(SHELL) $(top_srcdir)/../mkinstalldirs $(bindir) + for p in $(programs); do $(INSTALL_LIBTOOL_PROG) $$p $(bindir); done + $(INSTALL) -d "$(prefix)/texmf-dist/scripts/tex4ht" + for p in $(shell_scripts); do $(INSTALL_SCRIPT) $(srcdir)/$$p "$(prefix)/texmf-dist/scripts/tex4ht/$$p.sh"; done + for p in $(perl_scripts); do $(INSTALL_SCRIPT) $(srcdir)/$$p "$(prefix)/texmf-dist/scripts/tex4ht/$$p.pl"; done + if test -d "$(bindir)/../../texmf-dist/scripts/tex4ht"; then \ + d=../../texmf-dist/scripts/tex4ht; \ + elif test -d "$(bindir)/../texmf-dist/scripts/tex4ht"; then \ + d=../texmf-dist/scripts/tex4ht; \ + else \ + echo "Error: texmf-dist/scripts/tex4ht directory not found" >&2; \ + exit 1; \ + fi; \ + for p in $(shell_scripts); do rm -f $(bindir)/$$p; ln -s $$d/$$p.sh $(bindir)/$$p; done; \ + for p in $(perl_scripts); do rm -f $(bindir)/$$p; ln -s $$d/$$p.pl $(bindir)/$$p; done + +uninstall-exec: + for p in $(programs) $(scripts); do rm -f $(bindir)/$$p; done + +install-data: + +uninstall-data: + +distname = tex4ht + +kpse_include ../make/dist.mk +kpse_include ../make/config.mk +kpse_include ../make/clean.mk +distclean:: + -rm v*.tex *.txt i*.tex *.gif *.toc *.otc *.lg *.xref *.html *.idv *.log *.aux tmp.* tex4ht.env + +dvi info check: + +maybecheck: + TEXINPUTS=$(srcdir): $(SHELL) $(srcdir)/ht latex test + + +tex4ht.env: tex4ht.in + sed -e "s;@texmf@;$(texmf);" < $(srcdir)/tex4ht.in \ + | sed -e "s;@prefix@;$(prefix);g" \ + | sed -e "s;@imbindir@.;;g" \ + | sed -e "s/Mmove/Mmv/" \ + | sed -e "s/Ccopy/Ccp/" \ + > tex4ht.env + +kpse_include ../make/rdepend.mk +kpse_include depend.mk diff --git a/Build/source/texk/tex4htk/ac/withenable.ac b/Build/source/texk/tex4htk/ac/withenable.ac new file mode 100644 index 00000000000..d2396d98304 --- /dev/null +++ b/Build/source/texk/tex4htk/ac/withenable.ac @@ -0,0 +1,3 @@ +## texk/tex4htk/ac/withenable.ac +## configure options and TL libraries required for tex4htk +KPSE_WITH_PROG([tex4htk], [kpathsea]) diff --git a/Build/source/texk/tex4htk/configure.in.orig b/Build/source/texk/tex4htk/configure.in.orig new file mode 100644 index 00000000000..4a988f8dab2 --- /dev/null +++ b/Build/source/texk/tex4htk/configure.in.orig @@ -0,0 +1,11 @@ +dnl Process this file with autoconf to produce a configure script. + +AC_INIT(tex4ht.c) +AC_CONFIG_HEADERS([c-auto.h:c-auto.in], [date >stamp-auto]) + +sinclude(../kpathsea/common.ac) + +AC_CHECK_SIZEOF(int) + +KPSE_CONFIG_FILES([Makefile]) +AC_OUTPUT diff --git a/Build/source/texk/ttf2pk/Makefile.in.orig b/Build/source/texk/ttf2pk/Makefile.in.orig new file mode 100644 index 00000000000..64669ac3189 --- /dev/null +++ b/Build/source/texk/ttf2pk/Makefile.in.orig @@ -0,0 +1,64 @@ +# @configure_input@ +# Makefile for ttf2pk --te@dbs.uni-hannover.de. Public domain. + +kpse_include ../make/paths.mk +kpse_include ../make/common.mk +kpse_include ../make/programs.mk + +LDFREETYPE=@LDFREETYPE@ +FREETYPECPPFLAGS=@FREETYPECPPFLAGS@ +FREETYPEDEP=@FREETYPEDEP@ +FREETYPEDIR = ../../libs/freetype +FREETYPESRCDIR = $(srcdir)/$(FREETYPEDIR) + +prog_cflags = -DHAVE_LIBKPATHSEA $(FREETYPECPPFLAGS) +prog_ldflags = $(LDFREETYPE) + +ttf2pkobjs = errormsg.o filesrch.o ligkern.o newobj.o parse.o pklib.o \ + subfont.o texenc.o ttf2pk.o ttfenc.o ttflib.o + +ttf2tfmobjs = case.o errormsg.o filesrch.o ligkern.o newobj.o parse.o \ + subfont.o texenc.o tfmaux.o ttf2tfm.o ttfaux.o ttfenc.o vplaux.o + +programs = ttf2pk ttf2tfm + +default all: $(programs) + +ttf2pk: $(kpathsea) $(ttf2pkobjs) $(FREETYPEDEP) + $(kpathsea_link) $(ttf2pkobjs) $(prog_ldflags) $(LOADLIBES) + +ttf2tfm: $(kpathsea) $(ttf2tfmobjs) $(FREETYPEDEP) + $(kpathsea_link) $(ttf2tfmobjs) $(prog_ldflags) $(LOADLIBES) + +$(FREETYPEDIR)/lib/.libs/libttf.a: + cd $(FREETYPEDIR); $(MAKE) $(makeargs) + +kpse_include ../make/tkpathsea.mk + +install: install-exec install-data +uninstall: uninstall-exec uninstall-data + +install-exec: $(programs) + $(SHELL) $(top_srcdir)/../mkinstalldirs $(bindir) + for p in $(programs); do $(INSTALL_LIBTOOL_PROG) $$p $(bindir); done +uninstall-exec: + for p in $(programs); do rm -f $(bindir)/$$p; done + +install-data: ttf2pk.1 ttf2tfm.1 + $(SHELL) $(top_srcdir)/../mkinstalldirs $(man1dir) + $(INSTALL_DATA) $(srcdir)/ttf2pk.1 $(man1dir)/ttf2pk.$(manext) + $(INSTALL_DATA) $(srcdir)/ttf2tfm.1 $(man1dir)/ttf2tfm.$(manext) +uninstall-data: + rm -f $(man1dir)/ttf2pk.$(manext) $(man1dir)/ttf2tfm.$(manext) + +pre-dist-$(distname): +post-dist-$(distname): + +kpse_include ../make/dist.mk +kpse_include ../make/config.mk + +info dvi check: + +kpse_include ../make/clean.mk +kpse_include ../make/rdepend.mk +kpse_include depend.mk diff --git a/Build/source/texk/ttf2pk/ac/withenable.ac b/Build/source/texk/ttf2pk/ac/withenable.ac new file mode 100644 index 00000000000..1e64469d4de --- /dev/null +++ b/Build/source/texk/ttf2pk/ac/withenable.ac @@ -0,0 +1,3 @@ +## texk/ttf2pk/ac/withenable.ac +## configure options and TL libraries required for ttf2pk +KPSE_WITH_PROG([ttf2pk], [kpathsea freetype]) diff --git a/Build/source/texk/ttf2pk/configure.in.orig b/Build/source/texk/ttf2pk/configure.in.orig new file mode 100644 index 00000000000..c8a32886130 --- /dev/null +++ b/Build/source/texk/ttf2pk/configure.in.orig @@ -0,0 +1,19 @@ +dnl Public domain. +dnl Process this file with autoconf to produce a configure script. +AC_INIT(ttf2pk.c) + +AC_CONFIG_HEADERS([c-auto.h:c-auto.in]) + +AC_PROG_CC +AC_PROG_INSTALL +AC_PROG_MAKE_SET +AC_PROG_LN_S + +sinclude(../kpathsea/withenable.ac) +sinclude(../../libs/freetype/withenable.ac) +sinclude(../../libs/freetype/freetype.ac) + +AC_CHECK_LIB(m, main) + +KPSE_CONFIG_FILES([Makefile]) +AC_OUTPUT diff --git a/Build/source/texk/ttfdump/Makefile.in.orig b/Build/source/texk/ttfdump/Makefile.in.orig new file mode 100644 index 00000000000..d01b644dd81 --- /dev/null +++ b/Build/source/texk/ttfdump/Makefile.in.orig @@ -0,0 +1,148 @@ +# Makefile.in for Autoconf. +# @configure_input@ +# Copyright (C) 1992, 1993, 1994 Free Software Foundation, Inc. + +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2, or (at your option) +# any later version. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. + +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +# +# @configure_input@ + +SHELL = /bin/sh + +#### Start of system configuration section. #### + +srcdir = @srcdir@ +VPATH = @srcdir@ + +# If you use gcc, you should either run the fixincludes script that +# comes with it or else use gcc with the -traditional option. Otherwise +# ioctl calls will be compiled incorrectly on some systems. +CC = @CC@ +AR = ar + +# set make command +@SET_MAKE@ + +# Set RANLIB = echo if your system doesn't have or need ranlib. +RANLIB = @RANLIB@ + +# Use cp if you don't have install. +INSTALL = @INSTALL@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_DATA = @INSTALL_DATA@ + +DEFS = @DEFS@ +LIBS = @LIBS@ + +INCLUDES = -I@top_srcdir@/include +CFLAGS = @CFLAGS@ +LDFLAGS = @LDFLAGS@ + +MAKEINFO = makeinfo +TEXI2DVI = texi2dvi + +prefix = @prefix@ +exec_prefix = @exec_prefix@ + +# Where to install the executables. +bindir = $(exec_prefix)/bin + +# Where to put the include header +includedir = $(prefix)/include + +# Where to put the Info files +infodir = $(prefix)/info + +# Where to put the library file +libdir = $(prefix)/lib + +# Where to put the manual pages. +mandir = $(prefix)/man + +#### End of system configuration section. #### + +SUBDIRS = libttf src + +# Set default target. +all: + +.PHONY: all install uninstall +all check install uninstall: config.h Makefile all-local + @for subdir in $(SUBDIRS); do \ + echo "making $@ in $$subdir"; \ + ( cd $$subdir && $(MAKE) $(FLAGS_TO_PASS) $@ ) || exit 1; \ + done + +.PHONY: all-local +all-local: + +.PHONY: clean +clean: clean-local + @for dir in $(SUBDIRS); do echo making $@ in $$dir; cd $$dir && $(MAKE) $(FLAGS_TO_PASS) $@ || exit 1; cd ..; done + +.PHONY: distclean +distclean: distclean-local + @for dir in $(SUBDIRS); do echo making $@ in $$dir; cd $$dir && $(MAKE) $(FLAGS_TO_PASS) $@ || exit 1; cd ..; done + rm -f config.status + +.PHONY: realclean +realclean: realclean-local + @for dir in $(SUBDIRS); do echo making $@ in $$dir; cd $$dir && $(MAKE) $(FLAGS_TO_PASS) $@ || exit 1; cd ..; done + rm -f config.status + +.PHONY: mostlyclean-local +mostlyclean-local: + rm -f *~ + +.PHONY: clean-local +clean-local: mostlyclean-local + +.PHONY: distclean-local +distclean-local: clean-local + rm -f Makefile config.cache config.h config.log stamp-h + rm -f tags TAGS + +.PHONY: realclean-local +realclean-local: distclean-local + +#distclean: clean +# rm -f Makefile config.log config.cache config.status config.h stamp-h *~ + +# For the justification of the following Makefile rules, see node +# `Automatic Remaking' in GNU Autoconf documentation. +Makefile: Makefile.in config.status + CONFIG_FILES=$@ CONFIG_HEADERS= ./config.status +config.status: configure + ./config.status --recheck +# The rules to run autoconf and autoheader are commented out. This is because +# when the user unpacks a tarfile, configure.in might end up newer than +# configure, but the user might not have (and does not need to have) autoconf +# installed. +#configure: configure.in #aclocal.m4 +# cd $(srcdir); autoconf + +config.h: stamp-h + +# This used to do a ./config.status --recheck, to update config.status with +# any new #defines from config.h.in. The problem was that the rule itself +# depends on config.status, so that the --recheck would get run several +# times, which is bad if the user was trying to specify CFLAGS manually. +# It was a big pain in the neck. +stamp-h: config.h.in config.status + CONFIG_FILES=$@ CONFIG_HEADERS=config.h ./config.status + +#config.h.in: stamp-h.in +#stamp-h.in: configure.in #aclocal.m4 acconfig.h +# cd $(srcdir); autoheader +# date > $(srcdir)/stamp-h.in
\ No newline at end of file diff --git a/Build/source/texk/ttfdump/ac/withenable.ac b/Build/source/texk/ttfdump/ac/withenable.ac new file mode 100644 index 00000000000..5cd30903341 --- /dev/null +++ b/Build/source/texk/ttfdump/ac/withenable.ac @@ -0,0 +1,3 @@ +## texk/ttfdump/ac/withenable.ac +## configure options and TL libraries required for ttfdump +KPSE_WITH_PROG([ttfdump], [kpathsea]) diff --git a/Build/source/texk/ttfdump/configure.in.orig b/Build/source/texk/ttfdump/configure.in.orig new file mode 100644 index 00000000000..7b5ab86ac91 --- /dev/null +++ b/Build/source/texk/ttfdump/configure.in.orig @@ -0,0 +1,31 @@ +dnl Process this file with autoconf to produce a configure script. +AC_INIT +AC_CONFIG_SRCDIR([include/ttf.h]) + +dnl Checks for programs. +AC_PROG_CC +AC_PROG_INSTALL +AC_PROG_RANLIB +AC_PROG_MAKE_SET + +dnl Checks for libraries. + +dnl Checks for header files. +AC_HEADER_STDC + +dnl Checks for typedefs, structures, and compiler characteristics. + +AC_C_BIGENDIAN +AC_CHECK_SIZEOF(int) +AC_CHECK_SIZEOF(long) +AC_CHECK_SIZEOF(long long) +AC_C_INLINE + +dnl Checks for library functions. +AC_CHECK_FUNCS(strstr) + + +AC_CONFIG_HEADER(config.h) +AC_CONFIG_FILES([libttf/Makefile src/Makefile Makefile]) +AC_CONFIG_COMMANDS([default],[test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h],[]) +AC_OUTPUT diff --git a/Build/source/texk/web2c/Makefile.in.orig b/Build/source/texk/web2c/Makefile.in.orig new file mode 100644 index 00000000000..3ac474b9c7a --- /dev/null +++ b/Build/source/texk/web2c/Makefile.in.orig @@ -0,0 +1,1144 @@ +# $Id$ +# @configure_input@ +# Makefile for web2c --kb@mail.tug.org. Public domain. +version = @WEB2CVERSION@ + +# This makefile uses static rules with many targets (to be compatible to +# non-gnu make) and will not work correctly when parallelized. +# So we switch off parallel makes with gnu make. +.NOTPARALLEL: + +# These lines define the memory dumps that fmts/bases/mems will make and +# install-fmts/install-bases/install-mems will install. +# See the Formats node in doc/web2c.texi for more details. +fmts = olatex.fmt # amstex.fmt eplain.fmt texinfo.fmt +efmts = latex.fmt +pdffmts = pdfolatex.fmt +pdfefmts = pdflatex.fmt +afmts = lamed.fmt +ofmts = lambda.fmt +eofmts = elambda.fmt +bases = # no good reason to build cmmf.base. +mems = # mfplain.mem is probably not generally useful. + +# The name of the file that defines your local devices for Metafont. +# (Only relevant during `make bases'.) I recommend `modes.mf', which +# defines all known modes, plus useful definitions for all fonts. It's +# available from ftp://ftp.tug.org/tex/modes.mf, among other places. +localmodes = modes + +kpse_include ../make/paths.mk + +# Used for triptrap. +DIFF = diff +DIFFFLAGS = + +.SUFFIXES: # get rid of .p.o +kpse_include ../make/common.mk +kpse_include ../make/programs.mk + +XCPPFLAGS = $(PDFXCPPFLAGS) + +CXX = @CXX@ +CXXLD = $(CXX) +cxx_link_command = $(CXXLD) -o $@ $(LDFLAGS) +kpathsea_cxx_link = $(LIBTOOL) --mode=link $(cxx_link_command) + +@MAINT@ifeq ($(CC), gcc) +@MAINT@XDEFS = -Wimplicit -Wreturn-type -Wcomment -Wformat +@MAINT@endif + +# Make `#include <X11/...>' and `-lX...' work. +# This matches xdvik. +# wlibs is substituted by web2c's configure, LIBS by general configure +# routines, and the others by AC_PATH_XTRA. +# All the x_... variables will be empty if we aren't supporting X. +x_cppflags = @X_CFLAGS@ +x_ldflags = @X_LIBS@ +x_pre_libs = @X_PRE_LIBS@ +x_extra_libs = @X_EXTRA_LIBS@ +x_tool_libs = @x_tool_libs@ +x_ext_lib = @x_ext_lib@ +wlibs = @wlibs@ +# Follow the library order used in X11R6 itself: +# -lXaw -lXmu -lXt -lSM -lICE -lXext -lX11 (some may not be present). +windowlink = $(windowlib) $(x_ldflags) $(x_tool_libs) $(x_pre_libs) $(x_ext_lib) $(wlibs) $(x_extra_libs) + +# With --enable-ipc, TeX may need to link with -lsocket. +socketlibs = @socketlibs@ + +common_makeargs = $(MFLAGS) CC='$(CC)' CFLAGS='$(CFLAGS)' LDFLAGS='$(LDFLAGS)' $(XMAKEARGS) +window_makeargs = x_cppflags='$(x_cppflags)' $(common_makeargs) +install_makeargs = $(makevars) $(common_makeargs) + +proglib = lib/lib.a +windowlib = window/window.a + +# +# The sh script that does the conversion. The "." is the directory with +# native tools; we don't attempt cross-compiling a la luatex. The +# $(native) variable is used in luatex.mk. +native = . +web2c = srcdir=$(srcdir) $(SHELL) $(srcdir)/web2c/convert $(native) + +# We put this in the web2c directory for lack of a better place, but it +# is separate from (and simpler than) the actual web-to-C conversion programs. +makecpool = $(native)/web2c/makecpool + +# Additional dependencies: +web2c_common = web2c/convert web2c/common.defines +web2c_programs = web2c/fixwrites web2c/splitup web2c/web2c $(makecpool) +web2c_texmf = $(web2c_common) $(web2c_programs) \ + web2c/texmf.defines web2c/coerce.h + +# The helper programs: +TANGLEBOOT = @TANGLEBOOT@ +CTANGLEBOOT = @CTANGLEBOOT@ +TANGLE = @TANGLE@ +CTANGLE = @CTANGLE@ +TIE = @TIE@ + +# Calling tangle +tangle = WEBINPUTS=.:$(srcdir) $(TANGLE) +ctangle = $(CTANGLE) +tie = $(TIE) + +# The environment for making dumps. +# No need to specify TEXMF, as ../kpathsea/texmf.cnf should contain +# suitable absolute paths at this point. Those are converted to +# SELFAUTO* paths on installation. +dumpenv = TEXMFCNF=../kpathsea + +# Unfortunately, suffix rules can't have dependencies, or multiple +# targets, and we can't assume all makes supports pattern rules. +#.SUFFIXES: .p .c .ch .p +#.p.c: # really depends on $(web2c_programs), and generates .h. +# $(web2c) $* +#.ch.p: # really depends on tangle; for mf/mp/tex, also generates .pool +# ./tangle $(srcdir)/$*.web $< + +# These definitions have to come before the rules that expand them. +# The *{ini,[0-2]}.c files are created by splitup, run as part of convert. +# {mf,mp,tex}extra.c are created from lib/texmfmp.c, below. + +# Prevent Make from deleting the intermediate forms. +.PRECIOUS: %.ch %.p %.c + +tex = tex +mf = mf +@MFN@mfn = mf-nowin +# +default all: programs manpages doc/web2c.info @FMU@ +check: dumps + +bibtex: bibtex.o + $(kpathsea_link) bibtex.o $(LOADLIBES) +bibtex.c bibtex.h: $(web2c_common) $(web2c_programs) web2c/cvtbib.sed bibtex.p + $(web2c) bibtex +bibtex.p: tangle bibtex.web bibtex.ch + $(tangle) bibtex bibtex +check: bibtex-check +bibtex-check: bibtex + test -f tests/exampl.aux || \ + cp $(srcdir)/tests/exampl.aux tests/exampl.aux + TEXMFCNF=../kpathsea \ + BSTINPUTS=$(srcdir)/tests \ + BIBINPUTS=$(srcdir)/tests \ + ./bibtex tests/exampl +clean:: bibtex-clean +bibtex-clean: + $(LIBTOOL) --mode=clean rm -f bibtex + rm -f bibtex.o bibtex.c bibtex.h bibtex.p + rm -f tests/exampl.blg tests/exampl.bbl + +ctie: ctie.o + $(kpathsea_link) ctie.o $(LOADLIBES) +ctie.c: ctangle ctiedir/ctie.w ctiedir/ctie-k.ch + CWEBINPUTS=$(srcdir)/ctiedir $(ctangle) ctie.w ctie-k.ch +clean:: ctie-clean +ctie-clean: + $(LIBTOOL) --mode=clean rm -f ctie + rm -f ctie.o ctie.c + +cweave: cweave.o cweb.o + $(kpathsea_link) cweave.o cweb.o $(LOADLIBES) +cweave.c: ctangle cwebdir/cweave.w cwebdir/cweav-w2c.ch + CWEBINPUTS=$(srcdir)/cwebdir $(ctangle) cweave cweav-w2c +check: cweave-check +cweave-check: cweave + CWEBINPUTS=$(srcdir)/cwebdir ./cweave common.w +clean:: cweave-clean +cweave-clean: + $(LIBTOOL) --mode=clean rm -f cweave + rm -f cweave.o cweave.c + rm -f common.tex common.scn common.idx + +dvicopy: dvicopy.o + $(kpathsea_link) dvicopy.o $(LOADLIBES) +dvicopy.c dvicopy.h: $(web2c_common) $(web2c_programs) dvicopy.p + $(web2c) dvicopy +dvicopy.p: tangle dvicopy.web dvicopy.ch + $(tangle) dvicopy dvicopy +check: dvicopy-check +dvicopy-check: dvicopy + TEXMFCNF=../kpathsea \ + ./dvicopy $(srcdir)/tests/story tests/xstory.dvi +# Redirect stderr so the terminal output will end up in the log file. + (TFMFONTS=$(srcdir)/tests VFFONTS=$(srcdir)/tests ./dvicopy \ + <$(srcdir)/tests/pplr.dvi \ + >tests/xpplr.dvi) 2>&1 +clean:: dvicopy-clean +dvicopy-clean: + $(LIBTOOL) --mode=clean rm -f dvicopy + rm -f dvicopy.o dvicopy.c dvicopy.h dvicopy.p + rm -f tests/xstory.dvi tests/xpplr.dvi + +## dvitomp is a special case +kpse_include dvitomp.mk +## + +dvitype: dvitype.o + $(kpathsea_link) dvitype.o $(LOADLIBES) +dvitype.c dvitype.h: $(web2c_common) $(web2c_programs) dvitype.p + $(web2c) dvitype +dvitype.p: tangle dvitype.web dvitype.ch + $(tangle) dvitype dvitype +check: dvitype-check +dvitype-check: dvitype + ./dvitype -show-opcodes $(srcdir)/tests/story >tests/xstory.dvityp + ./dvitype --p=\*.\*.2 $(srcdir)/tests/pagenum.dvi >tests/xpagenum.typ +clean:: dvitype-clean +dvitype-clean: + $(LIBTOOL) --mode=clean rm -f dvitype + rm -f dvitype.o dvitype.c dvitype.h dvitype.p + rm -f tests/xstory.dvityp tests/xpagenum.typ + +gftodvi: gftodvi.o + $(kpathsea_link) gftodvi.o $(LOADLIBES) +gftodvi.c gftodvi.h: $(web2c_common) $(web2c_programs) gftodvi.p + $(web2c) gftodvi +gftodvi.p: tangle gftodvi.web gftodvi.ch + $(tangle) gftodvi gftodvi +check: gftodvi-check +gftodvi-check: gftodvi + TFMFONTS=$(srcdir)/tests ./gftodvi -verbose \ + $(srcdir)/tests/cmr10.600gf + mv cmr10.dvi tests/xcmr10.dvi +clean:: gftodvi-clean +gftodvi-clean: + $(LIBTOOL) --mode=clean rm -f gftodvi + rm -f gftodvi.o gftodvi.c gftodvi.h gftodvi.p + rm -f tests/xcmr10.dvi + +gftopk: gftopk.o + $(kpathsea_link) gftopk.o $(LOADLIBES) +gftopk.c gftopk.h: $(web2c_common) $(web2c_programs) gftopk.p + $(web2c) gftopk +gftopk.p: tangle gftopk.web gftopk.ch + $(tangle) gftopk gftopk +check: gftopk-check +gftopk-check: gftopk + ./gftopk -verbose $(srcdir)/tests/cmr10.600gf tests/xcmr10.pk + ./gftopk $(srcdir)/tests/cmr10.600gf cmr10.pk && rm cmr10.pk +clean:: gftopk-clean +gftopk-clean: + $(LIBTOOL) --mode=clean rm -f gftopk + rm -f gftopk.o gftopk.c gftopk.h gftopk.p + rm -f tests/xcmr10.pk + +gftype: gftype.o + $(kpathsea_link) gftype.o $(LOADLIBES) +gftype.c gftype.h: $(web2c_common) $(web2c_programs) gftype.p + $(web2c) gftype +gftype.p: tangle gftype.web gftype.ch + $(tangle) gftype gftype +check: gftype-check +gftype-check: gftype + ./gftype $(srcdir)/tests/cmr10.600gf >tests/xcmr10.gft1 + ./gftype -m -i $(srcdir)/tests/cmr10.600gf >tests/xcmr10.gft2 +clean:: gftype-clean +gftype-clean: + $(LIBTOOL) --mode=clean rm -f gftype + rm -f gftype.o gftype.c gftype.h gftype.p + rm -f tests/xcmr10.gft1 tests/xcmr10.gft2 + +mft: mft.o + $(kpathsea_link) mft.o $(LOADLIBES) +mft.c mft.h: $(web2c_common) $(web2c_programs) mft.p + $(web2c) mft +mft.p: tangle mft.web mft.ch + $(tangle) mft mft +check: mft-check +mft-check: mft + ./mft $(srcdir)/tests/io; mv io.tex tests/io.tex +clean:: mft-clean +mft-clean: + $(LIBTOOL) --mode=clean rm -f mft + rm -f mft.o mft.c mft.h mft.p + rm -f tests/io.tex + +patgen: patgen.o + $(kpathsea_link) patgen.o $(LOADLIBES) +patgen.c patgen.h: $(web2c_common) $(web2c_programs) patgen.p + $(web2c) patgen +patgen.p: tangle patgen.web patgen.ch + $(tangle) patgen patgen +check: patgen-check +patgen-check: patgen + ./patgen $(srcdir)/tests/dict $(srcdir)/tests/patterns tests/xpatout \ + $(srcdir)/tests/translate <$(srcdir)/tests/patgen.in +clean:: patgen-clean +patgen-clean: + $(LIBTOOL) --mode=clean rm -f patgen + rm -f patgen.o patgen.c patgen.h patgen.p + rm -f tests/xpatout pattmp.4 + +pktogf: pktogf.o + $(kpathsea_link) pktogf.o $(LOADLIBES) +pktogf.c pktogf.h: $(web2c_common) $(web2c_programs) pktogf.p + $(web2c) pktogf +pktogf.p: tangle pktogf.web pktogf.ch + $(tangle) pktogf pktogf +check: pktogf-check +pktogf-check: pktogf + ./pktogf -verbose $(srcdir)/tests/cmr10.pk tests/xcmr10.600gf + ./pktogf $(srcdir)/tests/cmr10.pk && rm cmr10.gf +clean:: pktogf-clean +pktogf-clean: + $(LIBTOOL) --mode=clean rm -f pktogf + rm -f pktogf.o pktogf.c pktogf.h pktogf.p + rm -f tests/xcmr10.600gf + +pktype: pktype.o + $(kpathsea_link) pktype.o $(LOADLIBES) +pktype.c pktype.h: $(web2c_common) $(web2c_programs) pktype.p + $(web2c) pktype +pktype.p: tangle pktype.web pktype.ch + $(tangle) pktype pktype +check: pktype-check +pktype-check: pktype + ./pktype $(srcdir)/tests/cmr10.pk >tests/xcmr10.pktyp +clean:: pktype-clean +pktype-clean: + $(LIBTOOL) --mode=clean rm -f pktype + rm -f pktype.o pktype.c pktype.h pktype.p + rm -f tests/xcmr10.pktyp + +pltotf: pltotf.o + $(kpathsea_link) pltotf.o $(LOADLIBES) +pltotf.c pltotf.h: $(web2c_common) $(web2c_programs) pltotf.p + $(web2c) pltotf +pltotf.p: tangle pltotf.web pltotf.ch + $(tangle) pltotf pltotf +check: pltotf-check +pltotf-check: pltotf + ./pltotf -verbose $(srcdir)/tests/cmr10 tests/xcmr10 +clean:: pltotf-clean +pltotf-clean: + $(LIBTOOL) --mode=clean rm -f pltotf + rm -f pltotf.o pltotf.c pltotf.h pltotf.p + rm -f tests/xcmr10.tfm + +pooltype: pooltype.o + $(kpathsea_link) pooltype.o $(LOADLIBES) +pooltype.c pooltype.h: $(web2c_common) $(web2c_programs) pooltype.p + $(web2c) pooltype +pooltype.p: tangle pooltype.web pooltype.ch + $(tangle) pooltype pooltype +check: pooltype-check +pooltype-check: tex.pool +pooltype-check: pooltype + ./pooltype tex.pool >tests/xtexpool.typ +clean:: pooltype-clean +pooltype-clean: + $(LIBTOOL) --mode=clean rm -f pooltype + rm -f pooltype.o pooltype.c pooltype.h pooltype.p + rm -f tests/xtexpool.typ + +tie: tie.o + $(kpathsea_link) tie.o $(LOADLIBES) +tie.c: ctangle tiedir/tie.w tiedir/tie-w2c.ch + CWEBINPUTS=$(srcdir)/tiedir $(ctangle) tie.w tie-w2c.ch +clean:: tie-clean +tie-clean: + $(LIBTOOL) --mode=clean rm -f tie + rm -f tie.o tie.c + +tftopl: tftopl.o + $(kpathsea_link) tftopl.o $(LOADLIBES) +tftopl.c tftopl.h: $(web2c_common) $(web2c_programs) tftopl.p + $(web2c) tftopl +tftopl.p: tangle tftopl.web tftopl.ch + $(tangle) tftopl tftopl +check: tftopl-check +tftopl-check: tftopl + ./tftopl -verbose $(srcdir)/tests/cmr10 tests/xcmr10 +clean:: tftopl-clean +tftopl-clean: + $(LIBTOOL) --mode=clean rm -f tftopl + rm -f tftopl.o tftopl.c tftopl.h tftopl.p + rm -f tests/xcmr10.pl + +vftovp: vftovp.o + $(kpathsea_link) vftovp.o $(LOADLIBES) +vftovp.c vftovp.h: $(web2c_common) $(web2c_programs) vftovp.p + $(web2c) vftovp +vftovp.p: tangle vftovp.web vftovp.ch + $(tangle) vftovp vftovp +check: vftovp-check +vftovp-check: vftovp + TFMFONTS=$(srcdir)/tests ./vftovp -verbose $(srcdir)/tests/ptmr ptmr tests/xptmr +clean:: vftovp-clean +vftovp-clean: + $(LIBTOOL) --mode=clean rm -f vftovp + rm -f vftop.o vftovp.c vftovp.h vftovp.p + rm -f tests/xptmr.vpl + +vptovf: vptovf.o + $(kpathsea_link) vptovf.o $(LOADLIBES) +vptovf.c vptovf.h: $(web2c_common) $(web2c_programs) vptovf.p + $(web2c) vptovf +vptovf.p: tangle vptovf.web vptovf.ch + $(tangle) vptovf vptovf +check: vptovf-check +vptovf-check: vptovf + ./vptovf $(srcdir)/tests/ptmr tests/xptmr tests/xptmr +clean:: vptovf-clean +vptovf-clean: + $(LIBTOOL) --mode=clean rm -f vptovf + rm -f vptovf.o vptovf.c vptovf.h vptovf.p + rm -f tests/xptmr.vf tests/xptmr.tfm + +weave: weave.o + $(kpathsea_link) weave.o $(LOADLIBES) +weave.c weave.h: $(web2c_common) $(web2c_programs) weave.p + $(web2c) weave +weave.p: tangle weave.web weave.ch + $(tangle) weave weave +check: weave-check +weave-check: weave + ./weave $(srcdir)/pooltype +clean:: weave-clean +weave-clean: + $(LIBTOOL) --mode=clean rm -f weave + rm -f weave.o weave.c weave.h weave.p + rm -f pooltype.tex + +# +# Defines that are common to the texmf programs. + +triptrap: trip trap mptrap +testdir = $(srcdir)/triptrap +testenv = TEXMFCNF=$(testdir) +dvitype_args = -output-level=2 -dpi=72.27 -page-start='*.*.*.*.*.*.*.*.*.*' + +# +# Metafont +mf_c = mfini.c mf0.c mf1.c +mf_o = mfini.o mf0.o mf1.o mf-pool.o mfextra.o +mfn_o = mfini.o mf0.o mf1.o mf-pool.o mfnowin.o +mf: $(mf_o) $(windowlib) + $(kpathsea_link) $(mf_o) $(windowlink) $(LOADLIBES) +mf-nowin: $(mfn_o) window/trap.o + $(kpathsea_link) $(mfn_o) window/trap.o $(LOADLIBES) +mfnowin.o: mfnowin.c + $(compile) -DMFNOWIN -c $< -o $@ +$(mf_c) mfcoerce.h mfd.h: mf.p $(web2c_texmf) web2c/cvtmf1.sed web2c/cvtmf2.sed + $(web2c) mf +mfextra.c: lib/texmfmp.c + sed s/TEX-OR-MF-OR-MP/mf/ $(srcdir)/lib/texmfmp.c >$@ +mfnowin.c: lib/texmfmp.c + sed s/TEX-OR-MF-OR-MP/mf/ $(srcdir)/lib/texmfmp.c >$@ +mf.p mf.pool: tangle mf.web mf-final.ch + $(tangle) $(srcdir)/mf.web mf-final.ch +mf-final.ch: $(TIE) mf.web mf.ch mf-binpool.ch + $(TIE) -c $@ $(srcdir)/mf.web $(srcdir)/mf.ch $(srcdir)/mf-binpool.ch +check: mf-check +mf-check: trap mf.base + ./mf --progname=mf '&./mf \tracingstats:=1; end.' + ./mf --progname=mf $(srcdir)/tests/online + ./mf --progname=mf $(srcdir)/tests/one.two + ./mf --progname=mf $(srcdir)/tests/uno.dos +clean:: mf-clean +mf-clean: trap-clean + $(LIBTOOL) --mode=clean rm -f mf + $(LIBTOOL) --mode=clean rm -f mf-nowin + rm -f $(mf_c) mfcoerce.h mfd.h mf.p mf.pool + rm -f $(mf_o) mfextra.c + rm -f $(mfn_o) mfnowin.c + rm -f mf.base mf.log + rm -f mfput.log online.2602gf online.log one.two.log uno.log + +# Can't run trap and mptrap in parallel, because both write trap.{log,tfm}. +trap: mf tftopl gftype trap-clean + @echo ">>> See $(testdir)/mftrap.diffs for example of acceptable diffs." >&2 + $(LN) $(testdir)/trap.mf . # get same filename in log + -$(SHELL) -c '$(testenv) ./mf --progname=inimf <$(testdir)/mftrap1.in >mftrapin.fot' + mv trap.log mftrapin.log + -diff $(testdir)/mftrapin.log mftrapin.log + -$(SHELL) -c '$(testenv) ./mf --progname=inimf <$(testdir)/mftrap2.in >mftrap.fot' + mv trap.log mftrap.log + mv trap.tfm mftrap.tfm + -diff $(testdir)/mftrap.fot mftrap.fot + -diff $(testdir)/mftrap.log mftrap.log + ./tftopl ./mftrap.tfm mftrap.pl + -diff $(testdir)/mftrap.pl mftrap.pl + $(SHELL) -c '$(testenv) ./gftype -m -i ./trap.72270gf >trap.typ' + -diff $(testdir)/trap.typ trap.typ + +trap-clean: + rm -f trap.mf trap.base + rm -f mftrapin.fot mftrapin.log + rm -f mftrap.fot mftrap.log mftrap.tfm + rm -f mftrap.pl trap.72270gf trap.typ +# +# MetaPost +kpse_include mpdir/mpostlib.mk +kpse_include metapost.mk +# +# TeX +tex_c = texini.c tex0.c tex1.c tex2.c +tex_o = texini.o tex0.o tex1.o tex2.o tex-pool.o texextra.o +tex: $(tex_o) + $(kpathsea_link) $(tex_o) $(socketlibs) $(LOADLIBES) +$(tex_c) texcoerce.h texd.h: tex.p $(web2c_texmf) + $(web2c) tex +texextra.c: lib/texmfmp.c + sed s/TEX-OR-MF-OR-MP/tex/ $(srcdir)/lib/texmfmp.c >$@ +tex.p tex.pool: tangle tex.web tex-final.ch + $(tangle) $(srcdir)/tex.web tex-final.ch +tex-final.ch: $(TIE) tex.web tex.ch tex-binpool.ch + $(TIE) -c $@ $(srcdir)/tex.web $(srcdir)/tex.ch $(srcdir)/tex-binpool.ch + +# tools to load pool for tex and mf. +# +tex-pool.c: tex.pool $(makecpool) tmf-pool.h + $(makecpool) tex.pool $(srcdir)/tmf-pool.h >$@ || rm -f $@ +mf-pool.c: mf.pool $(makecpool) tmf-pool.h + $(makecpool) mf.pool $(srcdir)/tmf-pool.h >$@ || rm -f $@ +mf-pool.o: mf-pool.c tmf-pool.h mfd.h +# we include mfd.h, so need lots more includes. + $(CC) $(CFLAGS) -I. -I.. -I$(srcdir) -I$(srcdir)/.. -DMETA_FONT -c -o $@ mf-pool.c + +check: tex-check +tex-check: trip tex.fmt +# Test truncation (but don't bother showing the warning msg). + ./tex --progname=tex --output-comment="`cat $(srcdir)/PROJECTS`" \ + $(srcdir)/tests/hello 2>/dev/null \ + && ./dvitype hello.dvi | grep olaf@infovore.xs4all.nl >/dev/null +# \openout should show up in \write's. + ./tex --progname=tex $(srcdir)/tests/openout && grep xfoo openout.log +# one.two.tex -> one.two.log + ./tex --progname=tex $(srcdir)/tests/one.two && ls -l one.two.log +# uno.dos -> uno.log + ./tex --progname=tex $(srcdir)/tests/uno.dos && ls -l uno.log + ./tex --progname=tex $(srcdir)/tests/just.texi && ls -l just.log + -./tex --progname=tex $(srcdir)/tests/batch.tex + ./tex --progname=tex --shell $(srcdir)/tests/write18 | grep echo + TEXMFCNF=../kpathsea \ + ./tex --mltex --progname=initex --ini $(srcdir)/tests/mltextst + -./tex </dev/null + -PATH=`pwd`:$(kpathsea_dir):$(kpathsea_srcdir):$$PATH \ + WEB2C=$(kpathsea_srcdir) TMPDIR=.. \ + ./tex --progname=tex '\nonstopmode\font\foo=nonesuch\end' +clean:: tex-clean +tex-clean: trip-clean + $(LIBTOOL) --mode=clean rm -f tex + rm -f $(tex_o) $(tex_c) texextra.c texcoerce.h texd.h + rm -f tex.p tex.pool + rm -f tex.fmt tex.log + rm -f hello.dvi hello.log xfoo.out openout.log on.two.log uno.log + rm -f just.log batch.log write18.log mltextst.log texput.log + rm -f missfont.log + rm -rf tfm + +trip: dvitype pltotf tftopl tex trip-clean + @echo ">>> See $(testdir)/trip.diffs for example of acceptable diffs." >&2 + ./pltotf $(testdir)/trip.pl trip.tfm + ./tftopl ./trip.tfm trip.pl + -diff $(testdir)/trip.pl trip.pl + $(LN) $(testdir)/trip.tex . # get same filename in log + -$(SHELL) -c '$(testenv) ./tex --progname=initex --ini <$(testdir)/trip1.in >tripin.fot' + mv trip.log tripin.log + -diff $(testdir)/tripin.log tripin.log +# May as well test non-ini second time through. + -$(SHELL) -c '$(testenv) ./tex --progname=tex <$(testdir)/trip2.in >trip.fot' + -diff $(testdir)/trip.fot trip.fot +# We use $(DIFF) instead of `diff' only for those files where there +# might actually be legitimate numerical differences. + -$(DIFF) $(DIFFFLAGS) $(testdir)/trip.log trip.log + $(SHELL) -c '$(testenv) ./dvitype $(dvitype_args) trip.dvi >trip.typ' + -$(DIFF) $(DIFFFLAGS) $(testdir)/trip.typ trip.typ + +trip-clean: + rm -f trip.tfm trip.pl trip.tex trip.fmt tripin.fot tripin.log + rm -f trip.fot trip.log trip.dvi trip.typ tripos.tex 8terminal.tex + rm -rf tfm +# +# Helper makefile fragments for pdf*tex and luatex. +kpse_include libsluapdf.mk +kpse_include pdftexdir/pdftexlib.mk +kpse_include luatexdir/luatexlib.mk +# +# Makefile fragments: +kpse_include synctexdir/synctex.mk +kpse_include etexdir/etex.mk +kpse_include omegadir/omega.mk +kpse_include alephdir/aleph.mk +kpse_include pdftexdir/pdftex.mk +kpse_include xetexdir/xetex.mk +kpse_include luatexdir/luatex.mk + +# +# non-engine programs. +programs = bibtex ctangle ctie cweave dvicopy dvitomp dvitype gftodvi gftopk \ + gftype mft $(odvicopy) $(odvitype) $(otangle) patgen $(pdftosrc) \ + pktogf pktype pltotf pooltype synctex tangle tftopl tie $(ttf2afm) \ + vftovp vptovf weave + +# basic_engines are the binaries we build and install directly here in +# the webdir/ directory. +# include $(metapost) from metapost.mk even though it also includes +# dvitomp. Hopefully that doesn't hurt. +basic_engines = $(tex) $(mf) $(mfn) $(metapost) + +# engines includes the ones built in subdirectories. +engines = $(basic_engines) $(etex) \ + $(omega) $(aleph) \ + $(pdftex) $(pdfetex) \ + $(xetex) $(luatex) + +programs: $(programs) $(engines) $(mpware_programs) \ + $(omegafonts_programs) $(otps_programs) $(pdftosrc) + +# Additional dependencies for relinking. +# Each program and engine already depends on $(web2c_programs). +$(web2c_programs) tangleboot ctangleboot: $(kpathsea) $(proglib) + +# +# Bootstrapping tangle requires making it with itself. We use the opportunity +# to create an up-to-date tangleboot as well. +tangle: tangle.o + $(kpathsea_link) tangle.o $(LOADLIBES) + $(MAKE) $(common_makeargs) tangleboot.p +tangle.c tangle.h: tangle.p + $(web2c) tangle +# tangle.p is a special case, since it is needed to compile itself. We +# convert and compile the (distributed) tangleboot.p to make a tangle +# which we use to make the other programs. We depend on tangleboot, even +# though we might not use it. +tangle.p: tangleboot tangle.web tangle.ch + WEBINPUTS=.:$(srcdir) $(TANGLEBOOT) tangle tangle +tangle.web: + @echo "You seem to be missing tangle.web, perhaps because you" >&2 + @echo "didn't retrieve web.tar.gz, only web2c.tar.gz." >&2 + @echo "You need both." >&2 + @echo >&2 + @echo "web.tar.gz should be available from the" >&2 + @echo "same place that you got web2c.tar.gz." >&2 + @echo "In any case, you can get it from" >&2 + @echo "ftp://ftp.tug.org/tex/web.tar.gz." >&2 + false +clean:: tangle-clean +tangle-clean: + $(LIBTOOL) --mode=clean rm -f tangle + rm -f tangle.o tangle.c tangle.h tangle.p + +tangleboot: tangleboot.o + $(kpathsea_link) tangleboot.o $(LOADLIBES) +tangleboot.c tangleboot.h: stamp-tangle $(web2c_programs) $(web2c_common) + $(web2c) tangleboot +# tangleboot.p is in the distribution +stamp-tangle: tangleboot.p + date >stamp-tangle +# This is not run unless tangle.web or tangle.ch is changed. +# Only try to run ./tangle if it actually exists, otherwise +# just touch tangleboot.p and build tangle. +tangleboot.p: tangle.web tangle.ch + if [ -r $(TANGLE) ] || [ -r $(TANGLE).exe ]; then \ + $(tangle) tangle tangle; \ + mv tangle.p tangleboot.p; \ + elif [ -r tangleboot.p ]; then \ + touch tangleboot.p; \ + else \ + cp $(srcdir)/tangleboot.p .; \ + fi + date >stamp-tangle + $(MAKE) $(common_makeargs) tangle +clean:: tangleboot-clean +tangleboot-clean: + $(LIBTOOL) --mode=clean rm -f tangleboot + rm -f tangleboot.o tangleboot.c tangleboot.h + +# Bootstrapping ctangle requires making it with itself. We use the opportunity +# to create an up-to-date ctangleboot as well. +ctangle: ctangle.o cweb.o + $(kpathsea_link) ctangle.o cweb.o $(LOADLIBES) + $(MAKE) $(common_makeargs) ctangleboot.c cwebboot.c +# ctangle.c is a special case, since it is needed to compile itself. +ctangle.c: ctangleboot cwebdir/ctangle.w cwebdir/ctang-w2c.ch + CWEBINPUTS=$(srcdir)/cwebdir $(CTANGLEBOOT) ctangle ctang-w2c +cweb.c: ctangleboot cwebdir/common.w cwebdir/comm-w2c.ch + CWEBINPUTS=$(srcdir)/cwebdir $(CTANGLEBOOT) common comm-w2c cweb.c +clean:: ctangle-clean +clean:: cweb-clean +ctangle-clean: + $(LIBTOOL) --mode=clean rm -f ctangle + rm -f ctangle.o ctangle.c +cweb-clean: + rm -f cweb.o cweb.c + +ctangleboot: ctangleboot.o cwebboot.o + $(kpathsea_link) ctangleboot.o cwebboot.o $(LOADLIBES) +# ctangleboot.c is in the distribution +stamp-ctangle: ctangleboot.c cwebboot.c +ctangleboot.c: cwebdir/ctangle.w cwebdir/ctang-w2c.ch + if [ -r $(CTANGLE) ] || [ -r $(CTANGLE).exe ]; then \ + CWEBINPUTS=$(srcdir)/cwebdir $(CTANGLE) ctangle ctang-w2c; \ + mv ctangle.c ctangleboot.c; \ + elif [ -r ctangleboot.c ]; then \ + touch ctangleboot.c; \ + else \ + cp $(srcdir)/ctangleboot.c .; \ + fi + date >stamp-ctangle + $(MAKE) $(common_makeargs) ctangle +cwebboot.c: cwebdir/common.w cwebdir/comm-w2c.ch + if [ -r $(CTANGLE) ] || [ -r $(CTANGLE).exe ]; then \ + CWEBINPUTS=$(srcdir)/cwebdir $(CTANGLE) common comm-w2c cweb.c; \ + mv cweb.c cwebboot.c; \ + elif [ -r cwebboot.c ]; then \ + touch cwebboot.c; \ + else \ + cp $(srcdir)/cwebboot.c .; \ + fi + date >stamp-ctangle + $(MAKE) $(common_makeargs) ctangle +clean:: ctangleboot-clean +clean:: cwebboot-clean +ctangleboot-clean: + $(LIBTOOL) --mode=clean rm -f ctangleboot + rm -f ctangleboot.o +cwebboot-clean: + rm -f cwebboot.o + +# Even web2c itself uses the library. +lib_sources = lib/alloca.c lib/basechsuffix.c lib/chartostring.c \ + lib/eofeoln.c lib/fprintreal.c lib/input2int.c lib/inputint.c lib/main.c \ + lib/openclose.c lib/printversion.c lib/uexit.c lib/usage.c lib/version.c \ + lib/zround.c +$(proglib): $(lib_sources) stamp-auto + cd lib && $(MAKE) $(common_makeargs) + +# No exceptions in this library. +window_sources = $(srcdir)/window/*.c +$(windowlib): mfd.h $(window_sources) + cd window && $(MAKE) $(window_makeargs) +window/trap.o: $(srcdir)/window/trap.c + cd window && $(MAKE) $(common_makeargs) trap.o + +# The web2c program consists of several executables. +web2c/fixwrites: web2c/fixwrites.c web2c/kps.c + cd web2c && $(MAKE) $(common_makeargs) fixwrites +web2c/splitup: web2c/splitup.c web2c/kps.c + cd web2c && $(MAKE) $(common_makeargs) splitup +web2c/web2c: web2c/main.c web2c/web2c.h web2c/web2c.l web2c/web2c.y web2c/kps.c + cd web2c && $(MAKE) $(common_makeargs) web2c +$(makecpool): web2c/makecpool.c + cd web2c && $(MAKE) $(common_makeargs) makecpool + +kpse_include ../make/tkpathsea.mk + +# +# Making dumps. +all_fmts = tex.fmt $(fmts) +all_bases = mf.base $(bases) +all_mems = mpost.mem $(mems) + +# We used to build these by default, but nowadays the dumps are created +# completely separately, e.g., at runtime by mktexfmt. So just leave it +# as an optional extra target. +dumps: fmts bases mems +fmts: $(all_fmts) +bases: $(all_bases) +mems: $(all_mems) + +tex.fmt: tex + $(dumpenv) $(MAKE) progname=tex files="plain.tex cmr10.tfm" prereq-check + $(dumpenv) ./tex --progname=tex --jobname=tex --ini \\input plain \\dump </dev/null + +olatex.fmt: tex + $(dumpenv) $(MAKE) progname=olatex files="latex.ltx" prereq-check + $(dumpenv) ./tex --progname=olatex --jobname=olatex --ini \\input latex.ltx </dev/null + +mltex.fmt: tex + $(dumpenv) $(MAKE) progname=mltex files="plain.tex cmr10.tfm" prereq-check + $(dumpenv) ./tex --mltex --progname=mltex --jobname=mltex --ini \\input plain \\dump </dev/null + +mf.base: mf + $(dumpenv) $(MAKE) progname=mf files="plain.mf cmr10.mf $(localmodes).mf" prereq-check + $(dumpenv) ./mf --progname=mf --jobname=mf --ini \\input plain input $(localmodes) dump </dev/null + +mpost.mem: mpost + $(dumpenv) $(MAKE) progname=mpost files=plain.mp prereq-check + $(dumpenv) ./mpost --progname=mpost --jobname=mpost --ini \\input plain dump </dev/null + +# This is meant to be called recursively, with $(files) set. +prereq-check: $(kpathsea_dir)/kpsewhich + $(kpathsea_dir)/kpsewhich --progname=$(progname) $(files) >/dev/null || $(MAKE) prereq-lose >/dev/null + +prereq-lose: + @echo "You seem to be missing input files necessary to make the" >&2 + @echo "basic formats (some or all of: $(files))." >&2 + @echo "Perhaps you've defined the default paths incorrectly, or" >&2 + @echo "perhaps you have environment variables set pointing" >&2 + @echo "to an incorrect location. See ../kpathsea/BUGS." >&2 + @echo >&2 + @echo "If you simply do not have the files, you can" >&2 + @echo "retrieve a minimal set of input files from CTAN hosts." >&2 + false + +$(kpathsea_dir)/kpsewhich: $(kpathsea) + +amstex.fmt: tex + $(dumpenv) ./tex --progname=amstex --jobname=amstex --ini amstex.ini </dev/null + +# Texinfo changes the escape character from `\' to `@'. +texinfo.fmt: tex.fmt + $(dumpenv) ./tex --progname=texinfo --jobname=texinfo --ini texinfo @dump </dev/null + +eplain.fmt: tex.fmt + touch eplain.aux # Makes cross-reference warnings work right. + $(dumpenv) ./tex --progname=eplain --jobname=eplain --ini \&./tex eplain \\dump </dev/null + +# +install: install-exec install-data +install-exec:: install-programs + +# Installation directories. +$(bindir):: + $(SHELL) $(top_srcdir)/../mkinstalldirs $(bindir) +$(texpooldir):: + $(SHELL) $(top_srcdir)/../mkinstalldirs $(texpooldir) +$(mfpooldir):: + $(SHELL) $(top_srcdir)/../mkinstalldirs $(mfpooldir) +$(mppooldir):: + $(SHELL) $(top_srcdir)/../mkinstalldirs $(mppooldir) +$(fmtdir):: + $(SHELL) $(top_srcdir)/../mkinstalldirs $(fmtdir) +$(basedir):: + $(SHELL) $(top_srcdir)/../mkinstalldirs $(basedir) +$(memdir):: + $(SHELL) $(top_srcdir)/../mkinstalldirs $(memdir) +$(web2cdir):: + $(SHELL) $(top_srcdir)/../mkinstalldirs $(web2cdir) + +# Installing the binaries. Each of the *dir/*.mk files (except etex) +# add to this target via a dependency-only rule, to install their +# respective engines. +install-programs: $(programs) $(basic_engines) $(bindir) + for p in $(programs) $(basic_engines); do \ + $(INSTALL_LIBTOOL_PROG) $$p $(bindir); done + +# We do not attempt to install any of the per-format symlinks, leaving +# that to a separate run of texlinks. + +# Always do plain.*, so examples from the TeXbook (etc.) will work. +# This target is not called, since it depends on the whole texmf tree, +# but we leave it for posterity. +install-fmts: install-tex-fmts +install-tex-fmts: fmts $(fmtdir) + fmts="$(all_fmts)"; \ + for f in $$fmts; do $(INSTALL_DATA) $$f $(fmtdir)/$$f; done + cd $(fmtdir) && (rm -f plain.fmt; $(LN) tex.fmt plain.fmt) + fmts="$(fmts)"; \ + for f in $$fmts; do base=`basename $$f .fmt`; \ + (cd $(bindir) && (rm -f $$base; $(LN) tex $$base)); done + +install-bases: install-mf-bases +install-mf-bases: bases $(basedir) + bases="$(all_bases)"; \ + for f in $$bases; do $(INSTALL_DATA) $$f $(basedir)/$$f; done + cd $(basedir) && (rm -f plain.base; $(LN) mf.base plain.base) + bases="$(bases)"; \ + for f in $$bases; do base=`basename $$f .base`;\ + (cd $(bindir) && (rm -f $$base; $(LN) mf $$base)); done + +install-mems: install-mpost-mems +install-mpost-mems: mems $(memdir) + mems="$(all_mems)"; \ + for f in $$mems; do $(INSTALL_DATA) $$f $(memdir)/$$f; done + cd $(memdir) && (rm -f plain.mem; $(LN) mpost.mem plain.mem) + mems="$(mems)"; \ + for f in $$mems; do base=`basename $$f .mem`; \ + (cd $(bindir) && (rm -f $$base; $(LN) mpost $$base)); done + +# Auxiliary files. +install-data:: $(web2cdir) + cd doc && $(MAKE) $(install_makeargs) install-data + cd man && $(MAKE) $(install_makeargs) install-data + $(SHELL) $(top_srcdir)/../mkinstalldirs $(man1dir) $(man5dir) + $(INSTALL_DATA) $(srcdir)/tiedir/tie.1 $(man1dir)/tie.$(manext) + $(INSTALL_DATA) $(srcdir)/ctiedir/ctie.1 $(man1dir)/ctie.$(manext) + $(INSTALL_DATA) $(srcdir)/synctexdir/man1/synctex.1 $(man1dir)/synctex.$(manext) + $(INSTALL_DATA) $(srcdir)/synctexdir/man5/synctex.5 $(man5dir)/synctex.5 + +# Dummy target. +uninstall uninstall-exec uninstall-data: + @echo "*** Warning: uninstall is a dummy target in web2c/Makefile" + +# The distribution comes with up-to-date .info* files, +# so this should never be used unless something goes wrong +# with the unpacking, or you modify the manual. +doc/web2c.info: + cd doc && $(MAKE) info +info dvi: + cd doc && $(MAKE) $@ + +# Manual pages +manpages: + cd man && $(MAKE) all + +# +# make dist won't work for anyone but me. Sorry. + +@MAINT@all-dist: dist web-dist etex-dist omega-dist aleph-dist pdftex-dist libs-dist +@MAINT@ +@MAINT@distname = web2c +@MAINT@program_files = PROJECTS *.ac *.ch tangleboot.p +@MAINT@# The files that omega places in the main directory. +@MAINT@omega_files = omegamem.h {odvicopy,odvitype,otangle}.{web,ch} +@MAINT@ +@MAINT@triptrapdiffs: triptrap/trip.diffs triptrap/mftrap.diffs triptrap/mptrap.diffs +@MAINT@triptrap/trip.diffs: tex +@MAINT@ $(MAKE) trip | tail +1 >triptrap/trip.diffs +@MAINT@triptrap/mftrap.diffs: mf +@MAINT@ $(MAKE) trap | tail +1 >triptrap/mftrap.diffs +@MAINT@triptrap/mptrap.diffs: mpost +@MAINT@ $(MAKE) mptrap | tail +1 >triptrap/mptrap.diffs +@MAINT@ +@MAINT@tests/check.log: $(programs) $(engines) +@MAINT@ $(MAKE) check | tail +1 >tests/check.log +@MAINT@ +@MAINT@dist_subdirs = doc lib $(mpware) tests web2c window +@MAINT@pre-dist-$(distname): depend triptrapdiffs tests/check.log tangleboot.p +@MAINT@ cd web2c && $(MAKE) lex.yy.c y_tab.c +@MAINT@ cd doc && $(MAKE) doc dvi +@MAINT@ +@MAINT@post-dist-$(distname): +@MAINT@# Make the subdirectories. +@MAINT@ for d in $(dist_subdirs); do \ +@MAINT@ mkdir -p $(texk_distdir)/$(distname)/$$d; done +@MAINT@# Link files in subdirectories. +@MAINT@ for f in `find $(dist_subdirs) \ +@MAINT@ \( -name README \ +@MAINT@ -o -name convert \ +@MAINT@ -o -name ChangeLog \ +@MAINT@ -o -name 'coerce.*' \ +@MAINT@ -o -name ref.aux \ +@MAINT@ -o -name ref.bbl \ +@MAINT@ -o -name ref.tex \ +@MAINT@ -o -name ref.txi \ +@MAINT@ -o -name texinfo.bst \ +@MAINT@ -o -name web2c.cps \ +@MAINT@ -o -name web2c.aux \ +@MAINT@ -o -name '*.asm' \ +@MAINT@ -o -name '*.[chly]' \ +@MAINT@ -o -name '*.defines' \ +@MAINT@ -o -name '*.in' \ +@MAINT@ -o -name '*.info*' \ +@MAINT@ -o -name '*.map' \ +@MAINT@ -o -name '*.sed' \ +@MAINT@ -o -name '*.tcx' \ +@MAINT@ -o -name '*.texi' \ +@MAINT@ \) -print`; do \ +@MAINT@ ln $$f $(distdir)/`dirname $$f`; done +@MAINT@# Handle the dependeny files in the subdirectories. +@MAINT@ for d in lib $(mpware) web2c window; do \ +@MAINT@ cp -p $$d/depend.mk $(texk_distdir)/$(distname)/$$d; done +@MAINT@# Other subdirectories. +@MAINT@ mkdir $(distdir)/triptrap && cd $(distdir)/triptrap && \ +@MAINT@ for i in ../../../../triptrap/*; do \ +@MAINT@ if test -f $$i; then ln -s $$i .; fi; done +@MAINT@ mkdir $(distdir)/tiedir && cd $(distdir)/tiedir && \ +@MAINT@ for i in ../../../../tiedir/*; do \ +@MAINT@ if test -f $$i; then ln -s $$i .; fi; done +@MAINT@ mkdir $(distdir)/ctiedir && cd $(distdir)/ctiedir && \ +@MAINT@ for i in ../../../../ctiedir/*; do \ +@MAINT@ if test -f $$i; then ln -s $$i .; fi; done +@MAINT@ mkdir $(distdir)/cwebdir && cd $(distdir)/cwebdir && \ +@MAINT@ for i in ../../../../cwebdir/*; do \ +@MAINT@ if test -f $$i; then ln -s $$i .; fi; done +@MAINT@ mkdir $(distdir)/cwebdir/examples && cd $(distdir)/cwebdir/examples && \ +@MAINT@ for i in ../../../../cwebdir/examples/*; do \ +@MAINT@ if test -f $$i; then ln -s $$i .; fi; done +@MAINT@ mkdir $(distdir)/man && cd $(distdir)/man && \ +@MAINT@ for i in ../../../../man/*; do \ +@MAINT@ if test -f $$i; then ln -s $$i .; fi; done; +@MAINT@ cd $(distdir)/man && rm -f *.1 Makefile sedscript +@MAINT@ rm -f $(distdir)/window/x11.c +@MAINT@ rm -f $(distdir)/tests/patgen.in +@MAINT@ cd $(distdir)/tests && (rm just.texi; ln -s ../../../../tests/* .; rm -f x* CVS) +@MAINT@ cd $(distdir)/tests && rm -f missfont.log ptmr.mpx io.tex exampl.b?? +@MAINT@# We supply the flex/bison output in case the user can't generate them. +@MAINT@ cd $(distdir)/web2c; ../../../../../rename 's/$$/-dist/' lex.yy.c y_tab.[ch] +@MAINT@# Remove cruft. +@MAINT@ cd $(distdir); rm -f $(addsuffix .c, $(programs) tangleboot) +@MAINT@ cd $(distdir); rm -f $(addsuffix .h, $(programs) tangleboot) +@MAINT@ cd $(distdir); rm -f etex.ch omega.ch aleph.ch +@MAINT@ cd $(distdir); rm -f pdftex.ch +@MAINT@ cd $(distdir); bash -c "rm -f tests/x* tests/allbib.{bbl,blg,dvi,log}" +@MAINT@ cd $(distdir)/tests && ln -s ../../../../tests/xampl.bib . +@MAINT@ cd $(distdir); bash -c "rm -f $(omega_files) alephmem.h" +@MAINT@ cd $(distdir); bash -c "rm -f cweb.c *{coerce,d}.h" +@MAINT@ cd $(distdir); bash -c "rm -f omega*.c aleph*.c" +@MAINT@ cd $(distdir); bash -c "rm -f tex*.c etex*.c" +@MAINT@ cd $(distdir); bash -c "rm -f pdftex*.c" +@MAINT@ cd $(distdir); bash -c "rm -f mf*.c mp*.c" +@MAINT@ cd $(distdir); bash -c "rm -f macnames.c *extra.c" +@MAINT@ touch $(distdir)/doc/*.info* +@MAINT@ +@MAINT@web-dist: +@MAINT@ rm -rf $(top_distdir) +@MAINT@ mkdir -p $(distdir) +@MAINT@ for f in *.web; do ln $$f $(distdir); done +@MAINT@ rm -f $(distdir)/etex.web $(distdir)/omega.web $(distdir)/aleph.web +@MAINT@ rm -f $(distdir)/pdfetex.web +@MAINT@ cd $(distdir); bash -c "rm -f $(omega_files)" +@MAINT@ chmod -w $(distdir)/* +@MAINT@ GZIP=-9 tar czf web-$(version).tar.gz $(top_distdir) +@MAINT@ rm -rf $(top_distdir) +@MAINT@ +@MAINT@etex-dist: etexdir/etex.version +@MAINT@ rm -rf $(top_distdir) +@MAINT@ mkdir -p $(distdir)/etexdir +@MAINT@ cp -rp etexdir/* $(distdir)/etexdir +@MAINT@ rm -rf $(distdir)/etexdir/CVS $(distdir)/etexdir/*/CVS +@MAINT@ rm -f $(distdir)/etexdir/etexextra.h $(distdir)/etexdir/etex.version +@MAINT@ GZIP=-9 tar czf web2c-$(version)-etex-`cat etexdir/etex.version`.tar.gz $(top_distdir) +@MAINT@ rm -rf $(top_distdir) +@MAINT@ +@MAINT@omega-dist: +@MAINT@ rm -rf $(top_distdir) +@MAINT@ mkdir -p $(distdir)/omegadir +@MAINT@ mkdir -p $(distdir)/omegaware $(distdir)/omegafonts $(distdir)/otps +@MAINT@ cp -p omegadir/* $(distdir)/omegadir +@MAINT@ cd omegafonts && $(MAKE) lex.yy.c y_tab.c +@MAINT@ for f in omegafonts/*.[chly] omegafonts/*.in; do cp -p $$f $(distdir)/omegafonts; done +@MAINT@ cp -p omegaware/* $(distdir)/omegaware +@MAINT@ cd otps && $(MAKE) lex.yy.c y_tab.c +@MAINT@ for f in otps/*.[chly] otps/*.in; do cp -p $$f $(distdir)/otps; done +@MAINT@ cp -p otps/mkocp otps/mkofm $(distdir)/otps +@MAINT@# We supply the flex/bison output in case the user can't generate them. +@MAINT@ cd $(distdir)/omegafonts; ../../../../../rename 's/$$/-dist/' lex.yy.c y_tab.[ch] +@MAINT@ cd $(distdir)/otps; ../../../../../rename 's/$$/-dist/' lex.yy.c y_tab.[ch] +@MAINT@ GZIP=-9 tar czf web2c-$(version)-omega-`cat omegadir/omega.version`.tar.gz $(top_distdir) +@MAINT@ rm -rf $(top_distdir) +@MAINT@ +@MAINT@aleph-dist: alephdir/aleph.version +@MAINT@ rm -rf $(top_distdir) +@MAINT@ mkdir -p $(distdir)/alephdir +@MAINT@ cp -p alephdir/* $(distdir)/alephdir +@MAINT@ @echo "*** Removing generated files ***" +@MAINT@ rm -f $(distdir)/alephdir/alephextra.h +@MAINT@ GZIP=-9 tar czf web2c-$(version)-aleph-`cat alephdir/aleph.version`.tar.gz $(top_distdir) +@MAINT@ rm -rf $(top_distdir) +@MAINT@ +@MAINT@pdfetex-dist: pdfetexdir/pdfetex.version +@MAINT@ rm -rf $(top_distdir) +@MAINT@ mkdir -p $(distdir)/pdfetexdir +@MAINT@ cp -rp pdfetexdir/* $(distdir)/pdfetexdir +@MAINT@ rm -rf $(distdir)/pdf*texdir/CVS $(distdir)/pdf*texdir/*/CVS +@MAINT@ rm -f $(distdir)/pdf*texdir/Makefile +@MAINT@ rm -f $(distdir)/pdf*texdir/*.[oa] +@MAINT@ rm -f $(distdir)/pdf*texdir/*/config.* +@MAINT@ rm -f $(distdir)/pdf*texdir/*/Makefile +@MAINT@ rm -f $(distdir)/pdf*texdir/*/*.[oa] +@MAINT@ rm -f $(distdir)/pdf*texdir/*/*/Makefile +@MAINT@ rm -f $(distdir)/pdf*texdir/*/*/*.[ao] +@MAINT@ rm -f $(distdir)/pdf*texdir/*/*/pdftoepdf.cc +@MAINT@ rm -f $(distdir)/pdf*texdir/*/*/epdf.h +@MAINT@ rm -f $(distdir)/pdf*texdir/pdf*texextra.h +@MAINT@ rm -f $(distdir)/pdf*texdir/pdf*tex.version +@MAINT@ mkdir -p $(top_distdir)/libs/xpdf +@MAINT@ cp -rp $(top_srcdir)/../../libs/xpdf/* $(top_distdir)/libs/xpdf +@MAINT@ rm -rf $(top_distdir)/libs/xpdf/CVS $(top_distdir)/libs/xpdf/*/CVS +@MAINT@ rm -f $(top_distdir)/libs/xpdf/Makefile +@MAINT@ rm -f $(top_distdir)/libs/xpdf/config.* +@MAINT@ rm -f $(top_distdir)/libs/xpdf/aconf.h +@MAINT@ rm -f $(top_distdir)/libs/xpdf/*/Makefile +@MAINT@ rm -f $(top_distdir)/libs/xpdf/*/*.[oa] +@MAINT@ rm -f $(top_distdir)/libs/xpdf/*/c-auto.h +@MAINT@ GZIP=-9 tar czf web2c-$(version)-pdftex-`cat pdfetexdir/pdfetex.version`.tar.gz $(top_distdir) +@MAINT@ rm -rf $(top_distdir) +@MAINT@ +@MAINT@libs-dist: +@MAINT@ rm -rf $(top_distdir) +@MAINT@ mkdir -p $(libs_distdir)/zlib +@MAINT@ cp -rp $(top_srcdir)/../../libs/zlib/* $(libs_distdir)/zlib +@MAINT@ mkdir -p $(libs_distdir)/libpng +@MAINT@ cp -rp $(top_srcdir)/../../libs/libpng/* $(libs_distdir)/libpng +@MAINT@ mkdir -p $(libs_distdir)/md5 +@MAINT@ cp -rp $(top_srcdir)/../../libs/md5/* $(libs_distdir)/md5 +@MAINT@ rm -f $(libs_distdir)/*/Makefile +@MAINT@ rm -f $(libs_distdir)/*/config.* +@MAINT@ rm -f $(libs_distdir)/*/c-auto.h +@MAINT@ rm -f $(libs_distdir)/*/*.[oa] +@MAINT@ GZIP=-9 tar czf web2c-$(version)-pdfetexlibs.tar.gz $(top_distdir) +@MAINT@ rm -rf $(top_distdir) + +kpse_include ../make/dist.mk + +kpse_include ../make/config.mk + +@MAINT@$(srcdir)/configure: $(srcdir)/withenable.ac + +# + +installcheck: + cd $(srcdir)/tests && bibtex allbib + mf '\mode:=ljfour; input logo10' && tftopl logo10.tfm >/dev/null + tex '\nonstopmode \tracingstats=1 \input story \bye' + +# +# Cleaning. +all_subdirs = doc lib man $(mpware) web2c window $(omegafonts) $(otps) \ + $(pdftexdir) $(mpostdir) $(luatexdir) + +# Having a multiple-target rule with the subdir loop fails because of +# the dependencies introduced by clean.mk. Yet, we want the +# dependencies here at the top level so that distclean will run the +# clean rules, etc. So, sigh, put the subdir loop in each target and +# only run it if we have a Makefile. Alternatively, we could do as +# Automake does. + +mostlyclean:: tangleboot-clean ctangleboot-clean + test ! -r lib/Makefile \ + || for d in $(all_subdirs); do (cd $$d && $(MAKE) $@); done +clean:: + test ! -r lib/Makefile \ + || for d in $(all_subdirs); do (cd $$d && $(MAKE) $@); done + rm -f *.log *.fmt *.base *.mem *.fls *.ofl *.aux +distclean:: + test ! -r lib/Makefile \ + || for d in $(all_subdirs); do (cd $$d && $(MAKE) $@); done +extraclean:: + test ! -r lib/Makefile \ + || for d in $(all_subdirs); do (cd $$d && $(MAKE) $@); done +maintainer-clean:: + test ! -r lib/Makefile \ + || for d in $(all_subdirs); do (cd $$d && $(MAKE) $@); done + +kpse_include ../make/clean.mk + +@MAINT@depend:: +@MAINT@ for d in lib $(mpware) web2c window $(otps); do \ +@MAINT@ (cd $$d && $(MAKE) depend); done + +kpse_include ../make/rdepend.mk +kpse_include depend.mk + +# +# Local variables: +# page-delimiter: "^# \f" +# End: diff --git a/Build/source/texk/web2c/ac/web2c.ac b/Build/source/texk/web2c/ac/web2c.ac new file mode 100644 index 00000000000..e5f0d273d1f --- /dev/null +++ b/Build/source/texk/web2c/ac/web2c.ac @@ -0,0 +1,62 @@ +## texk/web2c/ac/web2c.ac +## configure options for TeX and MF +AC_ARG_WITH([editor], + [AS_HELP_STRING([--with-editor=CMD], + [invoke CMD from the `e' option @<:@vi +%d %s@:>@])])[]dnl +AC_ARG_ENABLE([auto-core], + [AS_HELP_STRING([--enable-auto-core], + [cause TeX&MF to dump core, given a certain filename])])[]dnl +AC_ARG_ENABLE([dump-share], + [AS_HELP_STRING([--disable-dump-share], + [make fmt/base/mem files architecture-dependent])])[]dnl +AC_ARG_ENABLE([fmtutil], + [AS_HELP_STRING([--enable-fmtutil], + [use fmtutil for build dumps])])[]dnl +## configure options for TeX +AC_ARG_ENABLE([ipc], + [AS_HELP_STRING([--enable-ipc], + [enable TeX's --ipc option, i.e., pipe to a program])])[]dnl +m4_define([kpse_tex_progs], [dnl +[[tex], [yes], [no], [TeX], []], +[[etex], [no], [yes], [e-TeX], []], +[[omega], [no], [no], [Omega], []], +[[aleph], [yes], [no], [Aleph], []], +[[pdftex], [yes], [yes], [pdfTeX], [xpdf libpng obsdcompat]], +[[luatex], [yes], [no], [luaTeX], [xpdf libpng obsdcompat]], +[[xetex], [no], [yes], [XeTeX], [xpdf libpng freetype2]], +])[]dnl +m4_foreach([Kpse_Prog], [kpse_tex_progs], + [m4_ifset([Kpse_Prog], + [KPSE_WITH_XTEX(Kpse_Prog)])])[]dnl +## configure options for MF +AC_ARG_ENABLE([mf], + [AS_HELP_STRING([--disable-mf], + [do not build METAFONT])])[]dnl +AC_ARG_ENABLE([mf-nowin], + [AS_HELP_STRING([--enable-mf-nowin], + [build a separate non-windows-capable METAFONT], + [30])])[]dnl +AC_ARG_WITH([mf-x-toolkit], + [AS_HELP_STRING([--with-mf-x-toolkit], + [Use X toolkit for METAFONT])])[]dnl +m4_define([kpse_mf_win], [dnl +[[epsf], [EPSF], [EPSF pseudo]], +[[hp2627], [HP2627], [HP 2627]], +[[mftalk], [MFTALK], [mftalk (generic server)]], +[[next], [NEXT], [NeXT]], +[[regis], [REGIS], [Regis]], +[[suntools], [SUN], [old Suntools (this is not X)]], +[[tektronix], [TEKTRONIX], [Tektronix]], +[[uniterm], [UNITERM], [Uniterm]], +])[]dnl +m4_foreach([Kpse_Win], [kpse_mf_win], + [m4_ifset([Kpse_Win], + [KPSE_WITH_MFWIN(Kpse_Win)])])[]dnl +## configure options for MP +AC_ARG_ENABLE([mp], + [AS_HELP_STRING([--disable-mp], + [do not build METAPOST])])[]dnl +## configure options for WEB programs +AC_ARG_ENABLE([web-progs], + [AS_HELP_STRING([--disable-web-progs], + [do not build WEB programs bibtex ... weave])])[]dnl diff --git a/Build/source/texk/web2c/ac/withenable.ac b/Build/source/texk/web2c/ac/withenable.ac new file mode 100644 index 00000000000..be83880a3e5 --- /dev/null +++ b/Build/source/texk/web2c/ac/withenable.ac @@ -0,0 +1,4 @@ +## texk/web2c/ac/withenable.ac +## configure options and TL libraries required for web2c +KPSE_WITH_PROG([web2c], [kpathsea zlib], , [TeX & Co.]) +m4_include(kpse_TL[texk/web2c/ac/web2c.ac]) diff --git a/Build/source/texk/web2c/alephdir/am/aleph.am b/Build/source/texk/web2c/alephdir/am/aleph.am new file mode 100644 index 00000000000..1643770a4d0 --- /dev/null +++ b/Build/source/texk/web2c/alephdir/am/aleph.am @@ -0,0 +1,102 @@ +## texk/web2c/alephdir/am/aleph.am: Makefile fragment for Aleph. + +## Aleph +## +if ALEPH +bin_PROGRAMS += aleph +endif ALEPH + +## With --enable-ipc, Aleph may need to link with -lsocket. +aleph_LDADD = $(LDADD) $(socketlibs) + +aleph_CPPFLAGS = -I$(srcdir)/alephdir $(AM_CPPFLAGS) +aleph_c_h = alephini.c aleph0.c aleph1.c aleph2.c aleph3.c alephcoerce.h alephd.h +nodist_aleph_SOURCES = $(aleph_c_h) aleph-pool.c alephextra.c +aleph_SOURCES = \ + alephdir/aleph.c \ + alephdir/alephbis.c \ + alephdir/alephextra.h \ + alephdir/alephmem.h \ + alephdir/aleph-pool.h +## We must create alephd.h before compiling the aleph_SOURCES, +## but certainly don't want to create alephd.h if Aleph is not built. +if ALEPH +$(aleph_SOURCES): alephd.h +endif ALEPH +$(aleph_c_h): aleph-web2c +aleph-web2c: aleph.p $(web2c_texmf) alephdir/aleph.defines + $(web2c) aleph + echo timestamp >$@ + touch $(aleph_c_h) +alephextra.c: lib/texmfmp.c alephdir/alephextra.h alephd.h + sed s/TEX-OR-MF-OR-MP/aleph/ $(srcdir)/lib/texmfmp.c >$@ +aleph.p aleph.pool: aleph-tangle +aleph-tangle: otangle aleph.web aleph.ch + $(otangle) aleph aleph + echo timestamp >$@ + touch aleph.p aleph.pool +aleph-pool.c: aleph.pool $(makecpool) alephdir/aleph-pool.h + $(makecpool) aleph.pool $(srcdir)/alephdir/aleph-pool.h >$@ || rm -f $@ +## Generate aleph.web +aleph_web_srcs = \ + tex.web \ + alephdir/om16bit.ch \ + alephdir/omstr.ch \ + alephdir/omfont.ch \ + alephdir/omchar.ch \ + alephdir/omfi.ch \ + alephdir/ompar.ch \ + alephdir/omocp.ch \ + alephdir/omfilter.ch \ + alephdir/omtrans.ch \ + alephdir/omdir.ch \ + alephdir/eobase.ch \ + alephdir/eofmt.ch \ + alephdir/eomem.ch \ + alephdir/eo16bit.ch \ + alephdir/eoext.ch \ + alephdir/eoeqtb.ch \ + alephdir/eofix.ch \ + alephdir/eocprt.ch \ + alephdir/eonewdir.ch \ + alephdir/eover.ch \ + alephdir/eopage.ch \ + alephdir/eochar.ch +aleph.web: $(TIE) $(aleph_web_srcs) + $(tie) -m aleph.web $(aleph_web_srcs) +## Generate aleph.ch +aleph_ch_srcs = \ + alephdir/com16bit.ch \ + alephdir/comstr.ch \ + alephdir/comfont.ch \ + alephdir/comchar.ch \ + alephdir/comfi.ch \ + alephdir/compar.ch \ + alephdir/comocp.ch \ + alephdir/comfilter.ch \ + alephdir/comtrans.ch \ + alephdir/comdir.ch \ + alephdir/comsrcspec.ch \ + alephdir/ceostuff.ch +aleph.ch: $(TIE) aleph.web $(aleph_ch_srcs) + $(tie) -c aleph.ch aleph.web $(aleph_ch_srcs) +EXTRA_DIST += $(aleph_web_srcs) $(aleph_ch_srcs) lib/texmfmp.c +DISTCLEANFILES += $(nodist_aleph_SOURCES) aleph.web aleph.ch aleph-web2c \ + aleph.p aleph.pool aleph-tangle + +EXTRA_DIST += \ + alephdir/ChangeLog \ + alephdir/Makefile \ + alephdir/aleph.defines \ + alephdir/aleph.version \ + alephdir/eomega.ech \ + alephdir/etex.ch \ + alephdir/omega.ch0 \ + alephdir/omega.ch1 \ + alephdir/omega.ch2 \ + alephdir/omxml.ch + +## Eventually delete these files +## +EXTRA_DIST += alephdir/aleph.mk + diff --git a/Build/source/texk/web2c/am/bootstrap.am b/Build/source/texk/web2c/am/bootstrap.am new file mode 100644 index 00000000000..ad01159d6f1 --- /dev/null +++ b/Build/source/texk/web2c/am/bootstrap.am @@ -0,0 +1,110 @@ +## texk/web2c/am/bootstrap.am: Makefile fragment for tangle and ctangle. + +## Bootstrapping tangle requires making it with itself. We use the opportunity +## to create an up-to-date tangleboot as well. +bin_PROGRAMS += tangle +nodist_tangle_SOURCES = tangle.c tangle.h +tangle.c tangle.h: tangle-web2c +tangle-web2c: tangle.p + $(web2c) tangle + echo timestamp >$@ + touch tangle.c tangle.h +## tangle.p is a special case, since it is needed to compile itself. We +## convert and compile the (distributed) tangleboot.p to make a tangle +## which we use to make the other programs. We depend on tangleboot, even +## though we might not use it. +EXTRA_DIST += tangle.web tangle.ch +tangle.p: tangleboot tangle.web tangle.ch + WEBINPUTS=.:$(srcdir) $(tangleboot) tangle tangle +tangle.web: + @echo "You seem to be missing tangle.web, perhaps because you" >&2 + @echo "didn't retrieve web.tar.gz, only web2c.tar.gz." >&2 + @echo "You need both." >&2 + @echo >&2 + @echo "web.tar.gz should be available from the" >&2 + @echo "same place that you got web2c.tar.gz." >&2 + @echo "In any case, you can get it from" >&2 + @echo "ftp://ftp.tug.org/tex/web.tar.gz." >&2 + false +DISTCLEANFILES += tangle.c tangle.h tangle.p tangle-web2c + +noinst_PROGRAMS += tangleboot +nodist_tangleboot_SOURCES = tangleboot.c tangleboot.h +tangleboot.c tangleboot.h: stamp-tangle $(web2c_programs) $(web2c_common) + $(web2c) tangleboot +## tangleboot.p is in the distribution +EXTRA_DIST += tangleboot.p +stamp-tangle: tangleboot.p + date >stamp-tangle +## This is not run unless tangle.web or tangle.ch is changed. +## Only try to run ./tangle if it actually exists, otherwise +## just touch tangleboot.p and build tangle. +tangleboot.p: tangle.web tangle.ch + if [ -r $(TANGLE) ] || [ -r $(TANGLE).exe ]; then \ + $(tangle) tangle tangle; \ + mv tangle.p tangleboot.p; \ + elif [ -r tangleboot.p ]; then \ + touch tangleboot.p; \ + else \ + cp $(srcdir)/tangleboot.p .; \ + fi + date >stamp-tangle + $(MAKE) $(AM_MAKEFLAGS) tangle +DISTCLEANFILES += stamp-tangle tangleboot.c tangleboot.h + +## Bootstrapping ctangle requires making it with itself. We use the opportunity +## to create an up-to-date ctangleboot as well. +bin_PROGRAMS += ctangle +nodist_ctangle_SOURCES = ctangle.c cweb.c +## ctangle.c is a special case, since it is needed to compile itself. +## We depend on ctangleboot, even though we might not use it. +EXTRA_DIST += cwebdir +## We install man/cweb.man, not cwebdir/cweb.1 +## nodist_man_MANS += cwebdir/cweb.1 +ctangle.c: ctangleboot cwebdir/ctangle.w cwebdir/ctang-w2c.ch + CWEBINPUTS=$(srcdir)/cwebdir $(ctangleboot) ctangle ctang-w2c +cweb.c: ctangleboot cwebdir/common.w cwebdir/comm-w2c.ch + CWEBINPUTS=$(srcdir)/cwebdir $(ctangleboot) common comm-w2c cweb.c +DISTCLEANFILES += ctangle.c cweb.c + +noinst_PROGRAMS += ctangleboot +nodist_ctangleboot_SOURCES = ctangleboot.c cwebboot.c +## ctangleboot.c and cwebboot.c are in the distribution +EXTRA_DIST += ctangleboot.c cwebboot.c +stamp-ctangle: ctangleboot.c cwebboot.c + date >stamp-ctangle +## This is not run unless one of the cwebdir/* files is changed. +## Only try to run ./ctangle if it actually exists, otherwise +## just touch ctangleboot.c and/or cwebboot.c and build ctangle. +ctangleboot.c: cwebdir/ctangle.w cwebdir/ctang-w2c.ch + if [ -r $(CTANGLE) ] || [ -r $(CTANGLE).exe ]; then \ + CWEBINPUTS=$(srcdir)/cwebdir $(ctangle) ctangle ctang-w2c; \ + mv ctangle.c ctangleboot.c; \ + elif [ -r ctangleboot.c ]; then \ + touch ctangleboot.c; \ + else \ + cp $(srcdir)/ctangleboot.c .; \ + fi + date >stamp-ctangle + $(MAKE) $(AM_MAKEFLAGS) ctangle +cwebboot.c: cwebdir/common.w cwebdir/comm-w2c.ch + if [ -r $(CTANGLE) ] || [ -r $(CTANGLE).exe ]; then \ + CWEBINPUTS=$(srcdir)/cwebdir $(ctangle) common comm-w2c cweb.c; \ + mv cweb.c cwebboot.c; \ + elif [ -r cwebboot.c ]; then \ + touch cwebboot.c; \ + else \ + cp $(srcdir)/cwebboot.c .; \ + fi + date >stamp-ctangle + $(MAKE) $(AM_MAKEFLAGS) ctangle +DISTCLEANFILES += stamp-ctangle + +## Tests + +dist_check_SCRIPTS += tangle.test + +TESTS += tangle.test + +DISTCLEANFILES += cftest.p + diff --git a/Build/source/texk/web2c/am/cweb.am b/Build/source/texk/web2c/am/cweb.am new file mode 100644 index 00000000000..7bdbde25a19 --- /dev/null +++ b/Build/source/texk/web2c/am/cweb.am @@ -0,0 +1,30 @@ +## texk/web2c/am/cweb.am: Makefile fragment for cweb programs (except ctangle). + +bin_PROGRAMS += ctie +nodist_ctie_SOURCES = ctie.c +EXTRA_DIST += ctiedir +nodist_man_MANS += ctiedir/ctie.1 +ctie.c: ctangle ctiedir/ctie.w ctiedir/ctie-k.ch + CWEBINPUTS=$(srcdir)/ctiedir $(ctangle) ctie.w ctie-k.ch +DISTCLEANFILES += ctie.c + +bin_PROGRAMS += cweave +nodist_cweave_SOURCES = cweave.c cweb.c +cweave.c: ctangle cwebdir/cweave.w cwebdir/cweav-w2c.ch + CWEBINPUTS=$(srcdir)/cwebdir $(ctangle) cweave cweav-w2c +DISTCLEANFILES += cweave.c + +bin_PROGRAMS += tie +nodist_tie_SOURCES = tie.c +EXTRA_DIST += tiedir +nodist_man_MANS += tiedir/tie.1 +tie.c: ctangle tiedir/tie.w tiedir/tie-w2c.ch + CWEBINPUTS=$(srcdir)/tiedir $(ctangle) tie.w tie-w2c.ch +DISTCLEANFILES += tie.c + +## Tests + +TESTS += tiedir/tie.test + +DISTCLEANFILES += tie.outc tie.outm + diff --git a/Build/source/texk/web2c/am/texmf.am b/Build/source/texk/web2c/am/texmf.am new file mode 100644 index 00000000000..8d65e7bd065 --- /dev/null +++ b/Build/source/texk/web2c/am/texmf.am @@ -0,0 +1,108 @@ +## texk/web2c/am/texmf.am: Makefile fragment for TeX and MF. + +## Common for MF and TeX +EXTRA_DIST += \ + lib/mfmpi386.asm \ + lib/mfmpw32.c \ + lib/texmfmp.c \ + texmfmem.h \ + texmfmp-help.h \ + texmfmp.h + +## TeX +## +if TEX +bin_PROGRAMS += tex +endif TEX + +tex_CPPFLAGS = + +## With --enable-ipc, TeX may need to link with -lsocket. +tex_LDADD = $(LDADD) $(socketlibs) + +tex_c_h = texini.c tex0.c tex1.c tex2.c texcoerce.h texd.h +nodist_tex_SOURCES = $(tex_c_h) tex-pool.c texextra.c +$(tex_c_h): tex-web2c +tex-web2c: tex.p $(web2c_texmf) + $(web2c) tex + : $(synctex_convert_tex) + echo timestamp >$@ + touch $(tex_c_h) +texextra.c: lib/texmfmp.c texd.h + sed s/TEX-OR-MF-OR-MP/tex/ $(srcdir)/lib/texmfmp.c >$@ +tex.p tex.pool: tex-tangle +tex-tangle: $(TANGLE) tex.web tex-final.ch + $(tangle) tex.web tex-final.ch + echo timestamp >$@ + touch tex.p tex.pool +tex-pool.c: tex.pool $(makecpool) tmf-pool.h + $(makecpool) tex.pool $(srcdir)/tmf-pool.h >$@ || rm -f $@ +## Generate tex-final.ch +tex-final.ch: $(TIE) $(tex_ch_srcs) + $(tie) -c $@ $(tex_ch_srcs) +tex_ch_srcs = \ + tex.web \ + tex.ch \ + $(tex_ch_synctex) \ + tex-binpool.ch +## +EXTRA_DIST += $(tex_ch_srcs) lib/texmfmp.c tmf-pool.h + +DISTCLEANFILES += $(nodist_tex_SOURCES) tex-final.ch tex-web2c \ + tex.p tex.pool tex-tangle + +## Metafont +## +if MF +bin_PROGRAMS += mf +endif MF + +nodist_mf_SOURCES = mfextra.c +mf_CPPFLAGS = $(X_CFLAGS) +mf_LDADD = libmf.a $(LDADD) $(windowlib) $(mf_x_libs) +if MFN +bin_PROGRAMS += mf-nowin +nodist_mf_nowin_SOURCES = mfextra.c +mf_nowin_CPPFLAGS = $(X_CFLAGS) -DMFNOWIN +mf_nowin_LDADD = libmf.a $(LDADD) $(windowlib) +endif MFN + +windowlib = window/libwindow.a +$(windowlib): mfd.h $(srcdir)/window/*.c + cd window && $(MAKE) $(AM_MAKEFLAGS) libwindow.a +## Make `#include <X11/...>' and `-lX...' work. +## This matches xdvik. +## wlibs is substituted by web2c's configure, LIBS by general configure +## routines, and the others by AC_PATH_XTRA. +## All the x_... and X_... variables will be empty if we aren't supporting X. +## Follow the library order used in X11R6 itself: +## -lXaw -lXmu -lXt -lSM -lICE -lXext -lX11 (some may not be present). +mf_x_libs = $(X_LIBS) $(x_tool_libs) $(X_PRE_LIBS) $(x_ext_lib) $(wlibs) $(X_EXTRA_LIBS) + +## mf and mf-nowin compile mfextra.c with different CPPFLAGS. +## Automake, however, does not support CPPFLAGS for individual source files. +## To avoid compiling everything twice, the common objects are in a library. +EXTRA_LIBRARIES += libmf.a +mf_c_h = mfini.c mf0.c mf1.c mfcoerce.h mfd.h +nodist_libmf_a_SOURCES = $(mf_c_h) mf-pool.c +libmf_a_CPPFLAGS = -DMETA_FONT +$(mf_c_h): mf-web2c +mf-web2c: mf.p $(web2c_texmf) web2c/cvtmf1.sed web2c/cvtmf2.sed + $(web2c) mf + echo timestamp >$@ + touch $(mf_c_h) +EXTRA_DIST += mf.web mf-binpool.ch mf.ch mftalk.h lib/texmfmp.c tmf-pool.h +mfextra.c: lib/texmfmp.c mfd.h + sed s/TEX-OR-MF-OR-MP/mf/ $(srcdir)/lib/texmfmp.c >$@ +mf.p mf.pool: mf-tangle +mf-tangle: $(TANGLE) mf.web mf-final.ch + $(tangle) mf.web mf-final.ch + echo timestamp >$@ + touch mf.p mf.pool +mf-final.ch: $(TIE) mf.web mf.ch mf-binpool.ch + $(tie) -c $@ mf.web mf.ch mf-binpool.ch +mf-pool.c: mf.pool $(makecpool) tmf-pool.h + $(makecpool) mf.pool $(srcdir)/tmf-pool.h >$@ || rm -f $@ +DISTCLEANFILES += $(nodist_libmf_a_SOURCES) mfextra.c mf-final.ch mf-web2c \ + mf.p mf.pool mf-tangle + diff --git a/Build/source/texk/web2c/am/web.am b/Build/source/texk/web2c/am/web.am new file mode 100644 index 00000000000..951e4fded6c --- /dev/null +++ b/Build/source/texk/web2c/am/web.am @@ -0,0 +1,166 @@ +## texk/web2c/am/web.am: Makefile fragment for normal web programs (except tangle). + +web_programs = bibtex dvicopy dvitomp dvitype gftodvi gftopk gftype mft \ + patgen pktogf pktype pltotf pooltype tftopl vftovp vptovf weave + +if WEB +bin_PROGRAMS += $(web_programs) +endif WEB + +EXTRA_DIST += $(web_programs:=.web) $(web_programs:=.ch) +DISTCLEANFILES += $(web_programs:=.c) $(web_programs:=.h) \ + $(web_programs:=.p) $(web_programs:=-web2c) + +nodist_bibtex_SOURCES = bibtex.c bibtex.h +bibtex.c bibtex.h: bibtex-web2c +bibtex-web2c: $(web2c_common) $(web2c_programs) web2c/cvtbib.sed bibtex.p + $(web2c) bibtex + echo timestamp >$@ + touch bibtex.c bibtex.h +bibtex.p: tangle bibtex.web bibtex.ch + $(tangle) bibtex bibtex + +nodist_dvicopy_SOURCES = dvicopy.c dvicopy.h +dvicopy.c dvicopy.h: dvicopy-web2c +dvicopy-web2c: $(web2c_common) $(web2c_programs) dvicopy.p + $(web2c) dvicopy + echo timestamp >$@ + touch dvicopy.c dvicopy.h +dvicopy.p: tangle dvicopy.web dvicopy.ch + $(tangle) dvicopy dvicopy + +nodist_dvitomp_SOURCES = dvitomp.c dvitomp.h +dvitomp.c dvitomp.h: dvitomp-web2c +dvitomp-web2c: $(web2c_common) $(web2c_programs) dvitomp.p + $(web2c) dvitomp + echo timestamp >$@ + touch dvitomp.c dvitomp.h +dvitomp.p: tangle dvitomp.web dvitomp.ch + $(tangle) dvitomp dvitomp + +nodist_dvitype_SOURCES = dvitype.c dvitype.h +dvitype.c dvitype.h: dvitype-web2c +dvitype-web2c: $(web2c_common) $(web2c_programs) dvitype.p + $(web2c) dvitype + echo timestamp >$@ + touch dvitype.c dvitype.h +dvitype.p: tangle dvitype.web dvitype.ch + $(tangle) dvitype dvitype + +nodist_gftodvi_SOURCES = gftodvi.c gftodvi.h +gftodvi.c gftodvi.h: gftodvi-web2c +gftodvi-web2c: $(web2c_common) $(web2c_programs) gftodvi.p + $(web2c) gftodvi + echo timestamp >$@ + touch gftodvi.c gftodvi.h +gftodvi.p: tangle gftodvi.web gftodvi.ch + $(tangle) gftodvi gftodvi +gftodvi_SOURCES = gftodmem.h + +nodist_gftopk_SOURCES = gftopk.c gftopk.h +gftopk.c gftopk.h: gftopk-web2c +gftopk-web2c: $(web2c_common) $(web2c_programs) gftopk.p + $(web2c) gftopk + echo timestamp >$@ + touch gftopk.c gftopk.h +gftopk.p: tangle gftopk.web gftopk.ch + $(tangle) gftopk gftopk + +nodist_gftype_SOURCES = gftype.c gftype.h +gftype.c gftype.h: gftype-web2c +gftype-web2c: $(web2c_common) $(web2c_programs) gftype.p + $(web2c) gftype + echo timestamp >$@ + touch gftype.c gftype.h +gftype.p: tangle gftype.web gftype.ch + $(tangle) gftype gftype + +nodist_mft_SOURCES = mft.c mft.h +mft.c mft.h: mft-web2c +mft-web2c: $(web2c_common) $(web2c_programs) mft.p + $(web2c) mft + echo timestamp >$@ + touch mft.c mft.h +mft.p: tangle mft.web mft.ch + $(tangle) mft mft + +nodist_patgen_SOURCES = patgen.c patgen.h +patgen.c patgen.h: patgen-web2c +patgen-web2c: $(web2c_common) $(web2c_programs) patgen.p + $(web2c) patgen + echo timestamp >$@ + touch patgen.c patgen.h +patgen.p: tangle patgen.web patgen.ch + $(tangle) patgen patgen + +nodist_pktogf_SOURCES = pktogf.c pktogf.h +pktogf.c pktogf.h: pktogf-web2c +pktogf-web2c: $(web2c_common) $(web2c_programs) pktogf.p + $(web2c) pktogf + echo timestamp >$@ + touch pktogf.c pktogf.h +pktogf.p: tangle pktogf.web pktogf.ch + $(tangle) pktogf pktogf + +nodist_pktype_SOURCES = pktype.c pktype.h +pktype.c pktype.h: pktype-web2c +pktype-web2c: $(web2c_common) $(web2c_programs) pktype.p + $(web2c) pktype + echo timestamp >$@ + touch pktype.c pktype.h +pktype.p: tangle pktype.web pktype.ch + $(tangle) pktype pktype + +nodist_pltotf_SOURCES = pltotf.c pltotf.h +pltotf.c pltotf.h: pltotf-web2c +pltotf-web2c: $(web2c_common) $(web2c_programs) pltotf.p + $(web2c) pltotf + echo timestamp >$@ + touch pltotf.c pltotf.h +pltotf.p: tangle pltotf.web pltotf.ch + $(tangle) pltotf pltotf + +nodist_pooltype_SOURCES = pooltype.c pooltype.h +pooltype.c pooltype.h: pooltype-web2c +pooltype-web2c: $(web2c_common) $(web2c_programs) pooltype.p + $(web2c) pooltype + echo timestamp >$@ + touch pooltype.c pooltype.h +pooltype.p: tangle pooltype.web pooltype.ch + $(tangle) pooltype pooltype + +nodist_tftopl_SOURCES = tftopl.c tftopl.h +tftopl.c tftopl.h: tftopl-web2c +tftopl-web2c: $(web2c_common) $(web2c_programs) tftopl.p + $(web2c) tftopl + echo timestamp >$@ + touch tftopl.c tftopl.h +tftopl.p: tangle tftopl.web tftopl.ch + $(tangle) tftopl tftopl + +nodist_vftovp_SOURCES = vftovp.c vftovp.h +vftovp.c vftovp.h: vftovp-web2c +vftovp-web2c: $(web2c_common) $(web2c_programs) vftovp.p + $(web2c) vftovp + echo timestamp >$@ + touch vftovp.c vftovp.h +vftovp.p: tangle vftovp.web vftovp.ch + $(tangle) vftovp vftovp + +nodist_vptovf_SOURCES = vptovf.c vptovf.h +vptovf.c vptovf.h: vptovf-web2c +vptovf-web2c: $(web2c_common) $(web2c_programs) vptovf.p + $(web2c) vptovf + echo timestamp >$@ + touch vptovf.c vptovf.h +vptovf.p: tangle vptovf.web vptovf.ch + $(tangle) vptovf vptovf + +nodist_weave_SOURCES = weave.c weave.h +weave.c weave.h: weave-web2c +weave-web2c: $(web2c_common) $(web2c_programs) weave.p + $(web2c) weave + echo timestamp >$@ + touch weave.c weave.h +weave.p: tangle weave.web weave.ch + $(tangle) weave weave diff --git a/Build/source/texk/web2c/cftests/cftest.ch b/Build/source/texk/web2c/cftests/cftest.ch new file mode 100644 index 00000000000..220bf25a756 --- /dev/null +++ b/Build/source/texk/web2c/cftests/cftest.ch @@ -0,0 +1,7 @@ +% Replace seven_bits by eight_bits. + +@x +@!seven_bits=0..127; {seven-bit numbers, a subrange of the integers} +@y +@!eight_bits=0..255; {eight-bit numbers, a subrange of the integers} +@z diff --git a/Build/source/texk/web2c/cftests/cftest.p b/Build/source/texk/web2c/cftests/cftest.p new file mode 100644 index 00000000000..197bae6e97a --- /dev/null +++ b/Build/source/texk/web2c/cftests/cftest.p @@ -0,0 +1,2 @@ +{1:}program CFtest;type{2:}eightbits=0..255; +{:2}{:1}{3:}begin writeln('This is CFtest');end.{:3} diff --git a/Build/source/texk/web2c/cftests/cftest.web b/Build/source/texk/web2c/cftests/cftest.web new file mode 100644 index 00000000000..a49ba6a1947 --- /dev/null +++ b/Build/source/texk/web2c/cftests/cftest.web @@ -0,0 +1,15 @@ +% This is not a real program, only to test if tangle works. + +@* Introduction. +This is just a test. + +@p program CF_test; +type @<Types in the outer block@> + +@ @<Types...@>= +@!seven_bits=0..127; {seven-bit numbers, a subrange of the integers} + +@* Main program. + +@p begin write_ln('This is CFtest'); +end. diff --git a/Build/source/texk/web2c/cftests/lcftest.p b/Build/source/texk/web2c/cftests/lcftest.p new file mode 100644 index 00000000000..ab3074345bf --- /dev/null +++ b/Build/source/texk/web2c/cftests/lcftest.p @@ -0,0 +1,2 @@ +{1:}program CFtest;type{2:}eightbits=0..255;{:2}{:1}{3:} +begin writeln('This is CFtest');end.{:3} diff --git a/Build/source/texk/web2c/cftests/ocftest.p b/Build/source/texk/web2c/cftests/ocftest.p new file mode 100644 index 00000000000..ab3074345bf --- /dev/null +++ b/Build/source/texk/web2c/cftests/ocftest.p @@ -0,0 +1,2 @@ +{1:}program CFtest;type{2:}eightbits=0..255;{:2}{:1}{3:} +begin writeln('This is CFtest');end.{:3} diff --git a/Build/source/texk/web2c/configure.in.orig b/Build/source/texk/web2c/configure.in.orig new file mode 100644 index 00000000000..d1034db49ad --- /dev/null +++ b/Build/source/texk/web2c/configure.in.orig @@ -0,0 +1,502 @@ +dnl Process this file with Autoconf to produce a configure script for Web2c. +dnl +dnl Some things are no longer configurable: +dnl - SMALL{TeX,MF,BibTeX}: too painful to maintain the separate patch +dnl files, and, for TeX, texmfmem.h would have to be fixed to support +dnl more than 256 fonts. +dnl - NONASCII: necessary for the character translation feature. +dnl - REGFIX: modern compilers mostly ignore register declarations, anyway. +dnl The code for these things remains (where applicable), so you can +dnl get these features if you are willing to hack the sources. If not, +dnl it'll take a good argument to convince me to invest the time to make +dnl them configurable. +dnl +dnl We don't use (for example) tex/tex.web because people who only want +dnl to build part of the distribution may not have any given program. +dnl Even main.c isn't guaranteed, but then nothing is, really ... +AC_INIT(web2c/main.c) + +WEB2CVERSION=7.5.7 +AC_SUBST(WEB2CVERSION) +AC_DEFINE_UNQUOTED(WEB2CVERSION," (Web2C $WEB2CVERSION)") + +dnl Write output here, instead of putting a zillion -D's on the command line. +AC_CONFIG_HEADERS([c-auto.h:c-auto.in], + [sed 's/^#define PACKAGE_/#define WEB2C_PACKAGE_/' c-auto.h >c-auto.tmp && mv -f c-auto.tmp c-auto.h + date >stamp-auto]) + +AC_PROG_CC +AC_PROG_INSTALL +AC_PROG_LN_S +AC_PROG_MAKE_SET + +AC_PROG_YACC +AC_PROG_LEX +# Work around a problem with Flex Version 2.5.31 which needs -l flag. +# Since all recent versions of flex support -l, don't check for the +# specific version, but check that at least "--version" is supported. +# We also want to catch LEX=/some/where/flex, so: +case $LEX in + *flex) $LEX --version >/dev/null 2>&1 && LEX="$LEX -l" ;; +esac +AC_PROG_RANLIB +AC_CHECK_HEADERS(sys/time.h sys/timeb.h locale.h) +AC_CHECK_FUNCS(strerror gettimeofday ftime mkstemp mktemp setlocale strlcat strlcpy fmax) + +AC_TYPE_SIGNAL + +pb_AC_ASM_UNDERSCORE + +dnl pdfTeX likes inline functions in C code. +AC_C_INLINE + +dnl These are standard among *NIX systems, but not when cross-compiling +AC_DEFUN([CF_SUBST], +[AC_MSG_CHECKING(for $1 (symbol $2)) +AC_CACHE_VAL(cf_cv_subst_$2,[ +test -z "[$]$2" && $2=$3 +cf_cv_subst_$2=[$]$2]) +$2=${cf_cv_subst_$2} +AC_MSG_RESULT([$]$2) +AC_SUBST($2) +])dnl +CF_SUBST(loader,LD,ld) +CF_SUBST(archiver,AR,ar) +CF_SUBST(archiver options,ARFLAGS,rc) + +# Needed on A/UX 3.0. I don't want to pull in other -lposix's, though. +# From: bernt@weinberg.pop.bio.aau.dk (Bernt Guldbrandtsen) +if test `(uname) 2>/dev/null` = aux; then + AC_CHECK_LIB(posix, sigemptyset) +fi + +dnl These tests prevent reliable cross-compilation. Sigh. +dnl Some special hacks are used to make cross-compilation +dnl succeed in one special case. + +AC_UNSET_CC +AC_C_CHAR_UNSIGNED +AC_C_BIGENDIAN +AC_CHECK_SIZEOF(long) +AC_RESET_CC + +# --with and --enable options. +test "x$with_x_toolkit" = xyes && with_x=yes +test "x$with_x_toolkit" = xxt && with_x=yes +test "x$with_x_toolkit" = xathena && with_x=yes +test "x$with_x" = xno && with_x_toolkit=no + +: ${with_x=no} # tell PATH_XTRA no X by default, if not specified. + +sinclude(withenable.ac) +sinclude(../kpathsea/withenable.ac) +sinclude(../../libs/zlib/withenable.ac) +sinclude(../../libs/libpng/withenable.ac) +sinclude(../../libs/zlib/zlib.ac) +sinclude(../../libs/libpng/libpng.ac) +sinclude(../../libs/xpdf/libxpdf.ac) +sinclude(../../libs/obsdcompat/libobsd-compat.ac) +sinclude(../../libs/freetype2/withenable.ac) +sinclude(../../libs/freetype2/freetype2.ac) +sinclude(../../libs/teckit/withenable.ac) +sinclude(../../libs/teckit/teckit.ac) +sinclude(../../libs/icu-xetex/withenable.ac) +sinclude(../../libs/icu-xetex/icu-xetex.ac) +sinclude(../../libs/graphite-engine/withenable.ac) +sinclude(../../libs/graphite-engine/graphite-engine.ac) + +# Whether to build mf-nowin. +: ${with_mf_nowin=no} # Default. +if test "x$with_mf_nowin" = xyes; then + MFN= +else + MFN='#! ' +fi +AC_SUBST(MFN) + +# For Omega. +if test -d $srcdir/omegadir; then + test "${with_omega+set}" = set || with_omega=yes +else + if test "x$with_omega" = xyes; then + AC_MSG_WARN(The Omega sources are not available.) + fi + with_omega=no +fi +if test "x$with_omega" = xyes; then + OMEGA= + KPSE_CONFIG_FILES([omegafonts/Makefile otps/Makefile]) +else + OMEGA='#! ' +fi +AC_SUBST(OMEGA) + +# For Aleph +if test -d $srcdir/alephdir && test -d $srcdir/omegadir; then + test "${with_aleph+set}" = set || with_aleph=yes +else + if test "x$with_aleph" = xyes; then + AC_MSG_WARN(The Aleph sources are not available.) + fi + with_aleph=no +fi +if test "x$with_aleph" = xyes; then + ALEPH= +else + ALEPH='#! ' +fi +AC_SUBST(ALEPH) + +# For pdfTeX. +if test -d $srcdir/pdftexdir; then + # Create build dir, if necessary. + test -d pdftexdir || mkdir pdftexdir + test "${with_pdftex+set}" = set || with_pdftex=yes +else + if test "x$with_pdftex" = xyes; then + AC_MSG_WARN(The pdfTeX sources are not available.) + fi + with_pdftex=no +fi + +# For pdfeTeX +if test -d $srcdir/pdftexdir; then + test "${with_pdfetex+set}" = set || with_pdfetex=yes +else + if test "x$with_pdfetex" = xyes; then + AC_MSG_WARN(Not all sources of pdfeTeX are available.) + fi + with_pdfetex=no +fi + +# For luaTeX. +if test -d $srcdir/luatexdir; then + # Create build dir, if necessary. + test -d luatexdir || mkdir luatexdir + test "${with_luatex+set}" = set || with_luatex=yes +else + if test "x$with_luatex" = xyes; then + AC_MSG_WARN(The luaTeX sources are not available.) + fi + with_luatex=no +fi + +# For XeTeX +if test -d $srcdir/xetexdir \ + && test -d $srcdir/etexdir; then + test "${with_xetex+set}" = set || with_xetex=yes +else + if test "x$with_xetex" = xyes; then + AC_MSG_WARN(Not all sources of XeTeX are available.) + fi + with_xetex=no +fi + +# Check whether C++ compiler works. Prevent exit if it doesn't. +if test "x$with_pdftex" = xyes || + test "x$with_luatex" = xyes || + test "x$with_pdfetex" = xyes || + test "x$with_xetex" = xyes +then + # First test whether the compiler works in a subshell, and if so, + # do it again in the main shell so we see the result. +( + AC_PROG_CXX +) && { + AC_PROG_CXX +} || { + test "x$with_pdftex" = xyes \ + && AC_MSG_WARN(No C++ compiler: pdfTeX will not be compiled.) + test "x$with_pdfetex" = xyes \ + && AC_MSG_WARN(No C++ compiler: pdfeTeX will not be compiled.) + test "x$with_luatex" = xyes \ + && AC_MSG_WARN(No C++ compiler: luaTeX will not be compiled.) + test "x$with_xetex" = xyes \ + && AC_MSG_WARN(No C++ compiler: XeTeX will not be compiled.) + with_pdftex=no + with_pdfetex=no + with_luatex=no + with_xetex=no + true +} +fi + +# Check if we can link the C++ runtime lib statically, if we're building +# some binary that will need it. And, only try the magic hack, if C++ is +# GNU C++ (i.e. if $ac_cv_prog_gxx=yes). The reason for using a static +# C++ runtime is that binaries are more portable. That's important only +# if you are distributing binaries, so it is disabled by default. +# +flags_try1='-nodefaultlibs -Wl,-Bstatic -lstdc++ -Wl,-Bdynamic -lm -lgcc_eh -lgcc -lc -lgcc_eh -lgcc' +flags_try2='-nodefaultlibs -Wl,-Bstatic -lstdc++ -Wl,-Bdynamic -lm -lgcc -lc -lgcc' +CXXLDEXTRA= +CXXHACKLINK='$(kpathsea_cxx_link)' +CXXHACKLDLIBS='$(LOADLIBES)' +if test "x$with_cxx_runtime_hack" = xyes && + { test "x$with_pdftex" = xyes || + test "x$with_luatex" = xyes || + test "x$with_pdfetex" = xyes || + test "x$with_xetex" = xyes; } +then + AC_MSG_CHECKING(for statically linking C++ runtime library) + + cpp_link_hack=false + old_flags=$flags + old_ac_ext=$ac_ext + old_ac_link=$ac_link + if test "$ac_cv_prog_gxx" = yes; then + + # New C++ compilers choke on <iostream.h>, thanks to the + # backward-incompatible standard. At this point, our code is + # using the new-style <iostream>, and so our test should follow suit. + # + ac_ext=C + cat > conftest.$ac_ext << EOF +#include <iostream> + using namespace std; +int main() +{ + cout <<"worksok\n"; +} +EOF + for flags in "$flags_try1" "$flags_try2"; do + ac_link='${CXX-g++} -o conftest${ac_exeext} $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS $flags 1>&5' + if { (eval echo configure: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + case `(./conftest; exit) 2>/dev/null` in + worksok) + cpp_link_hack=true; break;; + esac + else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + fi + done + fi + + if $cpp_link_hack; then + CXXLDEXTRA=$flags + CXXHACKLINK='$(cxx_link_command)' + CXXHACKLDLIBS='$(proglib) $(kpathsea_dir)/.libs/libkpathsea.a $(LIBS) $(XLOADLIBES)' + AC_MSG_RESULT(ok using $flags) + else + AC_MSG_RESULT(not supported) + fi + + flags=$old_flags + ac_ext=$old_ac_ext + ac_link=$old_ac_link +fi +AC_SUBST(CXXLDEXTRA) +AC_SUBST(CXXHACKLINK) +AC_SUBST(CXXHACKLDLIBS) + +if test "x$with_pdftex" = xyes; then + PTEX= +else + PTEX='#! ' +fi +AC_SUBST(PTEX) + +if test "x$with_pdfetex" = xyes; then + PETEX= +else + PETEX='#! ' +fi +AC_SUBST(PETEX) + +if test "x$with_luatex" = xyes; then + LTEX= +else + LTEX='#! ' +fi +AC_SUBST(LTEX) + +if test "x$with_xetex" = xyes; then + XETEX= +else + XETEX='#! ' +fi +AC_SUBST(XETEX) + +sinclude(xetexdir/withenable.ac) +sinclude(xetexdir/tests.ac) + +sinclude(xetexdir/acx_pthread.m4) +ACX_PTHREAD + +# the following is for OpenBSD, where the PTHREAD_CFLAGS setting is defeated by -nodefaultlibs in the xetex link; +# similar hackery might be needed on other systems (groan) -- JK 2007-01-07 +case "${host}" in +*-*-*bsd*) + if test "x$PTHREAD_LIBS" = "x"; then + PTHREAD_LIBS="-lpthread" + fi ;; +esac + +if test "x$with_xetex" = xyes; then + AC_HAS_CARBON + + if test "x$has_carbon" = "xyes"; then + XETEX_MACOSX= + XETEX_GENERIC='#! ' + else + XETEX_MACOSX='#! ' + XETEX_GENERIC= + + AC_HAS_LIBFONTCONFIG + if test "x$LDFONTCONFIG" = "x"; then + AC_MSG_ERROR([ +Cannot build XeTeX without libfontconfig. +Use the --with-fontconfig=DIR option to specify the prefix where +fontconfig is installed. + ]) + fi + AC_SUBST(FONTCONFIGCPPFLAGS) + AC_SUBST(FONTCONFIGLDFLAGS) + AC_SUBST(LDFONTCONFIG) + fi + AC_SUBST(XETEX_MACOSX) + AC_SUBST(XETEX_GENERIC) + + if test "x$with_graphite" = xno; then + XETEX_GRAPHITE='#! ' + else + XETEX_GRAPHITE= + fi + AC_SUBST(XETEX_GRAPHITE) +fi + + +# For e-TeX, three choices: no, yes, and tex. In the latter case, we +# have to comment out the normal TeX build (TEX), as well as enable the +# e-TeX build (ETEX) and the replacement of TeX with e-TeX in compatibilty +# mode(CTEX). +if test -d $srcdir/etexdir; then + # Create build dir, if necessary. + test -d etexdir || mkdir etexdir + test "${with_etex+set}" = set || with_etex=yes +else + if test "x$with_etex" = xyes; then + AC_MSG_WARN(The e-TeX sources are not available.) + fi + with_etex=no +fi +if test "x$with_etex" = xyes; then + ETEX= +else + ETEX='#! ' +fi +AC_SUBST(ETEX) + + +# --with-x* options: Distinguish no X at all, no toolkit, or toolkit. +AC_PATH_XTRA +if test "x$with_x" = xyes; then + if test -n "$x_libraries"; then + XLFLAG="-L$x_libraries" + wlibs="-lX11 $wlibs $XLFLAG" + else + wlibs="-lX11 $wlibs" + fi + if test -z "$x_ext_lib"; then # allow envvar override + AC_CHECK_LIB(Xext, XextCreateExtension, + x_ext_lib=-lXext, :, $wlibs $X_EXTRA_LIBS $XLFLAG) + fi + if test "x$with_mf_x_toolkit" = xno; then + wfile=x11-Xlib.c + else + # Effectively demote --with-x-toolkit=athena to xt since + # the code does not distinguish. + x_tool_libs="-lXt $x_tool_libs" + wfile=x11-Xt.c + fi + test -d window || mkdir window + case "$srcdir" in + /*) wfile=$srcdir/window/$wfile;; + .) ;; + *) wfile=../$srcdir/window/$wfile;; + esac + (cd window && (rm -f x11.c; $LN_S $wfile x11.c)) + AC_DEFINE([X11WIN], 1, [Define to include X11 window in Metafont.]) +fi +AC_SUBST(x_ext_lib) +AC_SUBST(x_tool_libs) +AC_SUBST(wlibs) + +if test "x$enable_fmtutil" = xyes; then + FMU='# ' +else + FMU= +fi +AC_SUBST(FMU) + +# Don't bother with pdflib unless pdf*TeX is requested. +if test "$with_pdftex" = yes || \ + test "$with_pdfetex" = yes +then + KPSE_CONFIG_FILES([pdftexdir/Makefile]) +fi + +# Ditto luatex. +if test "$with_luatex" = yes; then + KPSE_CONFIG_FILES([luatexdir/Makefile]) +fi + +dnl Create tests subdirectory. +test -d tests || mkdir tests + +# Is libm present. FIXME: do we need it at all? +AC_CHECK_LIB(m, main) + +# For cross-compilation. Put at the end so there is a fair chance +# these are still visible when the configure script has finished. + +# The variables we need to build binaries that will run on the build +# machine: BUILDCC, BUILDCFLAGS, BUILDCCLD. +KPSE_CROSS_BUILD_VAR(CC, cc) +KPSE_CROSS_BUILD_VAR(CFLAGS, $(BUILDXCFLAGS)) +KPSE_CROSS_BUILD_VAR(CPPFLAGS, $(BUILDXCPPFLAGS)) +KPSE_CROSS_BUILD_VAR(LDFLAGS, $(BUILDXLDFLAGS)) +KPSE_CROSS_BUILD_VAR(CCLD, $(BUILDCC)) + +# And supporting programs we need to have available on the build +# machine. +KPSE_CROSS_PATH_PROG(TANGLEBOOT, tangle, ./tangleboot) +KPSE_CROSS_PATH_PROG(TANGLE, tangle, ./tangle) +KPSE_CROSS_PATH_PROG(CTANGLEBOOT, ctangle, ./ctangleboot) +KPSE_CROSS_PATH_PROG(CTANGLE, ctangle, ./ctangle) +KPSE_CROSS_PATH_PROG(TIE, tie, ./tie) +if test "x$with_omega" = xyes || test "x$with_aleph" = xyes || test "x$with_xetex" = xyes; then +KPSE_CROSS_PATH_PROG(OTANGLE, otangle, ./otangle) +fi + +AH_TOP([/* c-auto.h: defines for web2c, as determined by configure. + + Copyright 1994-97, 2008 Karl Berry. + Copyright 1997-99, 2002, 2005 Olaf Weber. + + This program is free software: you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation, either version 3 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program. If not, see <http://www.gnu.org/licenses/>. */ + +/* Guard against double inclusion. */ +#ifndef WEB2C_C_AUTO_H +#define WEB2C_C_AUTO_H + +/* web2c: the version string. */ +#define WEB2CVERSION "REPLACE-WITH-WEB2CVERSION"]) +AH_BOTTOM([#endif /* !WEB2C_C_AUTO_H */]) + +dnl Generate `Makefile's, `config.status', and our header file. +KPSE_CONFIG_FILES([Makefile doc/Makefile lib/Makefile man/Makefile mpware/Makefile + mpdir/Makefile web2c/Makefile window/Makefile]) +AC_OUTPUT diff --git a/Build/source/texk/web2c/doc/Makefile.in.orig b/Build/source/texk/web2c/doc/Makefile.in.orig new file mode 100644 index 00000000000..f6ba92e8582 --- /dev/null +++ b/Build/source/texk/web2c/doc/Makefile.in.orig @@ -0,0 +1,64 @@ +# @configure_input@ +# Makefile for Web2c documentation. + +kpse_include ../make/paths.mk +kpse_include ../make/common.mk +kpse_include kpathsea.mk +kpse_include ../make/texi.mk + +info: web2c.info +dvi: web2c.dvi + +web2c.info: install.texi ref.txi +all: web2c.info web2c.dvi + +@MAINT@INSTALL: install.texi +@MAINT@ $(MAKEINFO) $(one_info) $(MAKEINFO_FLAGS) $< -o $@ +@MAINT@ $(SHELL) $(top_srcdir)/../add-info-toc $@ +@MAINT@doc: info INSTALL +@MAINT@ +@MAINT@ref.txi: ref.bbl +@MAINT@ sed -e 's/~/ /g' \ +@MAINT@ -e 's/\\[-`'\''"c^]//g' \ +@MAINT@ -e 's/\\emdash */---/g' \ +@MAINT@ -e 's/metapost/MetaPost/g' \ +@MAINT@ -e 's/\\MF/Metafont/g' \ +@MAINT@ -e 's/\\METAFONT/METAFONT/g' \ +@MAINT@ -e 's/\\TUB/TUGboat/g' \ +@MAINT@ -e 's/\\LaTeX/La@TeX/g' \ +@MAINT@ -e 's/\\AMSTEX/AMS@TeX/g' \ +@MAINT@ -e 's/\\AmSTeX/AMS@TeX/g' \ +@MAINT@ -e 's/\\TeX/@TeX/g' \ +@MAINT@ -e 's/\\noopsort{[^}]*}//g' \ +@MAINT@ -e 's/[{}\]//g' \ +@MAINT@ -e 's/@\[/{/g' \ +@MAINT@ -e 's/@\]/}/g' \ +@MAINT@ -e 's/@TeX/@TeX{}/g' \ +@MAINT@ $< >$@ +@MAINT@ +@MAINT@ref.bbl: ref.aux texinfo.bst +@MAINT@ -bibtex ref +@MAINT@ +@MAINT@ref.aux: ref.tex +@MAINT@ rm -f ref.bbl +@MAINT@ tex '\nonstopmode \input ref' + +Makefile: Makefile.in ../config.status + cd .. && $(SHELL) config.status + +install: install-exec install-data +install-exec: +install-data: web2c.info + $(SHELL) $(top_srcdir)/../mkinstalldirs $(infodir) + $(INSTALL_DATA) $(srcdir)/web2c.i* $(infodir)/ +# + $(POST_INSTALL) + if $(SHELL) -c 'install-info --version' >/dev/null 2>&1; then \ + install-info --info-dir=$(infodir) $(infodir)/web2c.info; \ + else true; fi + +check: all + +#html: texi2html -expandinfo -number -menu -split_chapter + +kpse_include ../make/clean.mk diff --git a/Build/source/texk/web2c/etexdir/am/etex.am b/Build/source/texk/web2c/etexdir/am/etex.am new file mode 100644 index 00000000000..e334bc23b3f --- /dev/null +++ b/Build/source/texk/web2c/etexdir/am/etex.am @@ -0,0 +1,77 @@ +## texk/web2c/etexdir/am/etex.am: Makefile fragment for e-TeX. + +## e-TeX +## +if ETEX +bin_PROGRAMS += etex +endif ETEX + +etex_CPPFLAGS = + +## With --enable-ipc, e-TeX may need to link with -lsocket. +etex_LDADD = $(LDADD) $(socketlibs) + +etex_c_h = etexini.c etex0.c etex1.c etex2.c etexcoerce.h etexd.h +nodist_etex_SOURCES = $(etex_c_h) etex-pool.c etexextra.c etexdir/etexextra.h +$(etex_c_h): etex-web2c +etex-web2c: etex.p $(web2c_texmf) + $(web2c) etex + : $(synctex_convert_etex) + echo timestamp >$@ + touch $(etex_c_h) +etexextra.c: etexdir/etexextra.h lib/texmfmp.c etexd.h + sed s/TEX-OR-MF-OR-MP/etex/ $(srcdir)/lib/texmfmp.c >$@ +etex.p etex.pool: etex-tangle +etex-tangle: tangle etex.web etex.ch + $(tangle) etex etex + echo timestamp >$@ + touch etex.p etex.pool +etex-pool.c: etex.pool $(makecpool) tmf-pool.h + $(makecpool) etex.pool $(srcdir)/tmf-pool.h >$@ || rm -f $@ +## Extract etex version +etexdir/etex.version: etexdir/etex.ch + $(mkdir_p) etexdir + grep '^@d eTeX_version_string==' $(srcdir)/etexdir/etex.ch \ + | sed "s/^.*'-//;s/'.*$$//" >etexdir/etex.version +etexdir/etexextra.h: etexdir/etexextra.in etexdir/etex.version + sed s/ETEX-VERSION/`cat etexdir/etex.version`/ \ + $(srcdir)/etexdir/etexextra.in >$@ +## Generate etex.web +etex.web: $(TIE) $(etex_web_srcs) + $(tie) -m etex.web $(etex_web_srcs) +etex_web_srcs = \ + tex.web \ + etexdir/etex.ch \ + etexdir/etex.fix +## Generate etex.ch +etex.ch: $(TIE) etex.web $(etex_ch_srcs) + $(tie) -c etex.ch etex.web $(etex_ch_srcs) + +etex_ch_srcs = \ + etexdir/tex.ch0 \ + tex.ch \ + $(etex_ch_synctex) \ + etexdir/tex.ch1 \ + etexdir/tex.ech \ + etexdir/etex-binpool.ch +## +EXTRA_DIST += $(etex_web_srcs) $(etex_ch_srcs) etexdir/etexextra.in \ + lib/texmfmp.c tmf-pool.h + +DISTCLEANFILES += $(nodist_etex_SOURCES) etex.web etex.ch etex-web2c \ + etex.p etex.pool etex-tangle etexdir/etex.version + +EXTRA_DIST += \ + etexdir/ChangeLog \ + etexdir/INSTALL \ + etexdir/README \ + etexdir/etex_gen.tex + +## Not used +## +EXTRA_DIST += etexdir/etex.mak + +## Eventually delete these files +## +EXTRA_DIST += etexdir/etex.mk + diff --git a/Build/source/texk/web2c/luatexdir/am/luatex.am b/Build/source/texk/web2c/luatexdir/am/luatex.am new file mode 100644 index 00000000000..6dbeee810fd --- /dev/null +++ b/Build/source/texk/web2c/luatexdir/am/luatex.am @@ -0,0 +1,564 @@ +## texk/web2c/luatexdir/am/luatex.am: Makefile fragment for luaTeX. + +## luaTeX +## +if LUATEX +bin_PROGRAMS += luatex +endif LUATEX + +## Force Automake to use CXXLD for linking +nodist_EXTRA_luatex_SOURCES = dummy.cxx + +luatex_tangle = WEBINPUTS=$(srcdir)/luatexdir $(buildenv) $(LUATANGLE) + +luatex_CPPFLAGS = $(ZLIB_INCLUDES) $(LIBPNG_INCLUDES) $(XPDF_INCLUDES) +luatex_CPPFLAGS += $(OBSDCOMPAT_INCLUDES) -I$(srcdir)/libmd5 +luatex_CPPFLAGS += -Iluatexdir -I$(srcdir)/luatexdir -I$(srcdir)/luatexdir/lua51 +luatex_CPPFLAGS += -Dextra_version_info=`date +-%Y%m%d%H` + +luatex_ldadd = libluatex.a libff.a libluamisc.a libzzip.a liblua51.a +luatex_ldadd += $(LIBPNG_LIBS) $(ZLIB_LIBS) $(XPDF_LIBS) +luatex_ldadd += $(OBSDCOMPAT_LIBS) libmd5.a + +luatex_LDADD = $(luatex_ldadd) $(LDADD) $(socketlibs) + +luatex_DEPENDENCIES = $(proglib) libluatex.a +luatex_DEPENDENCIES += $(LIBPNG_DEPEND) $(ZLIB_DEPEND) $(XPDF_DEPEND) +luatex_DEPENDENCIES += $(OBSDCOMPAT_DEPEND) libmd5.a + +luatex_c_h = luatexini.c luatex0.c luatex1.c luatex2.c luatex3.c luatexcoerce.h luatexd.h +nodist_luatex_SOURCES = $(luatex_c_h) luatex-pool.c luatexextra.c luatexdir/luatexextra.h +$(luatex_c_h): luatex-web2c +luatex-web2c: luatex.p $(web2c_texmf) luatexdir/luatex.defines + $(web2c) luatex + echo timestamp >$@ + touch $(luatex_c_h) +luatexextra.c: luatexd.h luatexdir/luatexextra.h lib/texmfmp.c + sed s/TEX-OR-MF-OR-MP/luatex/ $(srcdir)/lib/texmfmp.c >$@ +luatex_sources = luatexdir/luatex.web luatexdir/luatex.ch +luatex.p luatex.pool: luatex-tangle +luatex-tangle: luatangle $(luatex_sources) + $(luatex_tangle) --underlines luatex luatex + echo timestamp >$@ + touch luatex.p luatex.pool +luatex-pool.c: luatex.pool $(makecpool) luatexdir/ptexlib.h luatexd.h + $(makecpool) luatex.pool luatexdir/ptexlib.h >$@ || rm -f $@ +## Extract luatex version +luatexdir/luatex.version: luatexdir/luatex.web + $(mkdir_p) luatexdir + grep '^@d luatex_version_string==' $(srcdir)/luatexdir/luatex.web \ + | sed "s/^.*=='//;s/'.*$$//" >luatexdir/luatex.version +luatexdir/luatexextra.h: luatexdir/luatexextra.in luatexdir/luatex.version + sed -e s/LUATEX-VERSION/`cat luatexdir/luatex.version`/ \ + $(srcdir)/luatexdir/luatexextra.in >$@ + +EXTRA_DIST += $(luatex_sources) \ + luatexdir/luatex.defines \ + luatexdir/luatexextra.in \ + luatexdir/ptexlib.h + +DISTCLEANFILES += $(nodist_luatex_SOURCES) luatex-web2c \ + luatex.p luatex.pool luatex-tangle luatexdir/luatex.version + +## luatangle +## +if LUATEX +bin_PROGRAMS += luatangle +endif LUATEX + +nodist_luatangle_SOURCES = luatangle.c luatangle.h +luatangle.c luatangle.h: $(web2c_common) $(web2c_programs) luatangle.p + $(web2c) luatangle +EXTRA_DIST += $(luatangle_sources) +luatangle_sources = luatexdir/luatangle.web luatexdir/luatangle.ch +luatangle.p: tangle $(luatangle_sources) + WEBINPUTS=$(srcdir)/luatexdir $(buildenv) $(TANGLE) luatangle luatangle +DISTCLEANFILES += luatangle.c luatangle.h luatangle.p + +## liblua51 +## +EXTRA_LIBRARIES += liblua51.a + +liblua51_a_CPPFLAGS = -I$(top_srcdir)/luatexdir/lua51 +if !MINGW32 +liblua51_a_CPPFLAGS += -DLUA_USE_POSIX +endif !MINGW32 + +liblua51_a_SOURCES = \ + luatexdir/lua51/lapi.c \ + luatexdir/lua51/lapi.h \ + luatexdir/lua51/lauxlib.c \ + luatexdir/lua51/lauxlib.h \ + luatexdir/lua51/lbaselib.c \ + luatexdir/lua51/lcoco.c \ + luatexdir/lua51/lcoco.h \ + luatexdir/lua51/lcode.c \ + luatexdir/lua51/lcode.h \ + luatexdir/lua51/ldblib.c \ + luatexdir/lua51/ldebug.c \ + luatexdir/lua51/ldebug.h \ + luatexdir/lua51/ldo.c \ + luatexdir/lua51/ldo.h \ + luatexdir/lua51/ldump.c \ + luatexdir/lua51/lfunc.c \ + luatexdir/lua51/lfunc.h \ + luatexdir/lua51/lgc.c \ + luatexdir/lua51/lgc.h \ + luatexdir/lua51/linit.c \ + luatexdir/lua51/liolib.c \ + luatexdir/lua51/llex.c \ + luatexdir/lua51/llex.h \ + luatexdir/lua51/llimits.h \ + luatexdir/lua51/lmathlib.c \ + luatexdir/lua51/lmem.c \ + luatexdir/lua51/lmem.h \ + luatexdir/lua51/loadlib.c \ + luatexdir/lua51/lobject.c \ + luatexdir/lua51/lobject.h \ + luatexdir/lua51/lopcodes.c \ + luatexdir/lua51/lopcodes.h \ + luatexdir/lua51/loslib.c \ + luatexdir/lua51/lparser.c \ + luatexdir/lua51/lparser.h \ + luatexdir/lua51/lstate.c \ + luatexdir/lua51/lstate.h \ + luatexdir/lua51/lstring.c \ + luatexdir/lua51/lstring.h \ + luatexdir/lua51/lstrlib.c \ + luatexdir/lua51/ltable.c \ + luatexdir/lua51/ltable.h \ + luatexdir/lua51/ltablib.c \ + luatexdir/lua51/ltm.c \ + luatexdir/lua51/ltm.h \ + luatexdir/lua51/lua.h \ + luatexdir/lua51/luaconf.h \ + luatexdir/lua51/lualib.h \ + luatexdir/lua51/lundump.c \ + luatexdir/lua51/lundump.h \ + luatexdir/lua51/lvm.c \ + luatexdir/lua51/lvm.h \ + luatexdir/lua51/lzio.c \ + luatexdir/lua51/lzio.h + +## Not used +## +EXTRA_DIST += \ + luatexdir/lua51/Makefile \ + luatexdir/lua51/lua.c \ + luatexdir/lua51/luac.c \ + luatexdir/lua51/print.c + +## zziplib +## +EXTRA_LIBRARIES += libzzip.a + +libzzip_a_DEPENDENCIES = liblua51.a + +libzzip_a_CPPFLAGS = \ + $(KPSE_ZLIB_INCLUDES) \ + -I$(top_srcdir)/luatexdir/zziplib + +libzzip_a_SOURCES = \ + luatexdir/zziplib/zzip/__debug.h \ + luatexdir/zziplib/zzip/__dirent.h \ + luatexdir/zziplib/zzip/__fnmatch.h \ + luatexdir/zziplib/zzip/__hints.h \ + luatexdir/zziplib/zzip/__mmap.h \ + luatexdir/zziplib/zzip/_config.h \ + luatexdir/zziplib/zzip/conf.h \ + luatexdir/zziplib/zzip/dir.c \ + luatexdir/zziplib/zzip/err.c \ + luatexdir/zziplib/zzip/fetch.c \ + luatexdir/zziplib/zzip/fetch.h \ + luatexdir/zziplib/zzip/file.c \ + luatexdir/zziplib/zzip/file.h \ + luatexdir/zziplib/zzip/format.h \ + luatexdir/zziplib/zzip/info.c \ + luatexdir/zziplib/zzip/info.h \ + luatexdir/zziplib/zzip/lib.h \ + luatexdir/zziplib/zzip/memdisk.c \ + luatexdir/zziplib/zzip/memdisk.h \ + luatexdir/zziplib/zzip/mmapped.c \ + luatexdir/zziplib/zzip/mmapped.h \ + luatexdir/zziplib/zzip/plugin.c \ + luatexdir/zziplib/zzip/plugin.h \ + luatexdir/zziplib/zzip/stdint.h \ + luatexdir/zziplib/zzip/stat.c \ + luatexdir/zziplib/zzip/types.h \ + luatexdir/zziplib/zzip/write.c \ + luatexdir/zziplib/zzip/zip.c \ + luatexdir/zziplib/zzip/zzip.h + +EXTRA_DIST += \ + luatexdir/zziplib/COPYING.LIB \ + luatexdir/zziplib/ChangeLog \ + luatexdir/zziplib/README \ + luatexdir/zziplib/TODO \ + luatexdir/zziplib/zziplib.spec + +## Not used +## +EXTRA_DIST += \ + luatexdir/zziplib/Makefile.am \ + luatexdir/zziplib/Makefile.in \ + luatexdir/zziplib/Makefile.mk \ + luatexdir/zziplib/SDL \ + luatexdir/zziplib/aclocal.m4 \ + luatexdir/zziplib/bins \ + luatexdir/zziplib/config.h.in \ + luatexdir/zziplib/configure \ + luatexdir/zziplib/configure.ac \ + luatexdir/zziplib/docs \ + luatexdir/zziplib/m4 \ + luatexdir/zziplib/msvc6 \ + luatexdir/zziplib/msvc7 \ + luatexdir/zziplib/msvc8 \ + luatexdir/zziplib/test \ + luatexdir/zziplib/uses \ + luatexdir/zziplib/zzip/Makefile \ + luatexdir/zziplib/zzip/Makefile.am \ + luatexdir/zziplib/zzip/Makefile.in \ + luatexdir/zziplib/zzip/_msvc.h \ + luatexdir/zziplib/zzip/_msvc.sed \ + luatexdir/zziplib/zzip/autoconf.h \ + luatexdir/zziplib/zzip/fseeko.c \ + luatexdir/zziplib/zzip/fseeko.h \ + luatexdir/zziplib/zzip/zziplib.wpj \ + luatexdir/zziplib/zzipback.sed \ + luatexdir/zziplib/zzipwrap + +## libluamisc (luafilesystem, luamd5, luapeg, luazip, luazlib, +## and slnunicode) +EXTRA_LIBRARIES += libluamisc.a + +libluamisc_a_DEPENDENCIES = $(KPSE_ZLIB_DEPEND) libzzip.a + +libluamisc_a_CPPFLAGS = \ + $(KPSE_ZLIB_INCLUDES) \ + -I$(top_srcdir)/luatexdir/lua51 \ + -I$(top_srcdir)/luatexdir/zziplib + +libluamisc_a_SOURCES = \ + luatexdir/luafilesystem/src/lfs.c \ + luatexdir/luafilesystem/src/lfs.h \ + luatexdir/luamd5/md5.c \ + luatexdir/luamd5/md5.h \ + luatexdir/luamd5/md5lib.c \ + luatexdir/luapeg/lpeg.c \ + luatexdir/luazip/src/luazip.c \ + luatexdir/luazip/src/luazip.h \ + luatexdir/luazlib/lgzip.c \ + luatexdir/luazlib/lzlib.c \ + luatexdir/slnunicode/slnunico.c + +## Included by slnunico.c +EXTRA_libluamisc_a_SOURCES = luatexdir/slnunicode/slnudata.c + +## Not used +## +EXTRA_DIST += \ + luatexdir/luafilesystem/Makefile \ + luatexdir/luafilesystem/config \ + luatexdir/luafilesystem/doc \ + luatexdir/luafilesystem/tests \ + luatexdir/luafilesystem/vc6 \ + luatexdir/luamd5/makefile \ + luatexdir/luamd5/md5.html \ + luatexdir/luamd5/md5.lua \ + luatexdir/luamd5/md5tests.lua \ + luatexdir/luazip/Makefile \ + luatexdir/luazip/README \ + luatexdir/luazip/config \ + luatexdir/luazip/doc \ + luatexdir/luazip/tests \ + luatexdir/luazip/vc6 \ + luatexdir/luazip/vc7 \ + luatexdir/luazlib/Makefile \ + luatexdir/luazlib/README \ + luatexdir/luazlib/gzip.lua \ + luatexdir/luazlib/test_gzip.lua \ + luatexdir/luazlib/test_zlib.lua \ + luatexdir/luazlib/zlib.lua \ + luatexdir/slnunicode/unitest + +## luafontforge +## +EXTRA_LIBRARIES += libff.a + +libff_a_DEPENDENCIES = libluamisc.a + +libff_a_CPPFLAGS = \ + -DFONTFORGE_CONFIG_NO_WINDOWING_UI=1 -DLUA_FF_LIB=1 \ + -D_NO_PYTHON=1 -DX_DISPLAY_MISSING=1 -DNODYNAMIC=1 \ + -D_NO_FREETYPE=1 -D_NO_LIBUNINAMESLIST=1 -UHAVE_LIBINTL_H \ + -I$(top_srcdir)/luatexdir/lua51 \ + -I$(top_srcdir)/luatexdir/luafontforge/fontforge/inc \ + -I$(top_srcdir)/luatexdir/luafontforge/fontforge/fontforge + +libff_a_SOURCES = \ + luatexdir/luafontforge/fontforge/Unicode/alphabet.c \ + luatexdir/luafontforge/fontforge/Unicode/char.c \ + luatexdir/luafontforge/fontforge/Unicode/cjk.c \ + luatexdir/luafontforge/fontforge/Unicode/gwwiconv.c \ + luatexdir/luafontforge/fontforge/Unicode/memory.c \ + luatexdir/luafontforge/fontforge/Unicode/ustring.c \ + luatexdir/luafontforge/fontforge/fontforge/autohint.c \ + luatexdir/luafontforge/fontforge/fontforge/charview.c \ + luatexdir/luafontforge/fontforge/fontforge/configure-pfaedit.h \ + luatexdir/luafontforge/fontforge/fontforge/contextchain.c \ + luatexdir/luafontforge/fontforge/fontforge/edgelist.h \ + luatexdir/luafontforge/fontforge/fontforge/edgelist2.h \ + luatexdir/luafontforge/fontforge/fontforge/encoding.c \ + luatexdir/luafontforge/fontforge/fontforge/featurefile.c \ + luatexdir/luafontforge/fontforge/fontforge/fontinfo.c \ + luatexdir/luafontforge/fontforge/fontforge/fontview.c \ + luatexdir/luafontforge/fontforge/fontforge/fvfonts.c \ + luatexdir/luafontforge/fontforge/fontforge/groups.h \ + luatexdir/luafontforge/fontforge/fontforge/kernclass.c \ + luatexdir/luafontforge/fontforge/fontforge/lookups.c \ + luatexdir/luafontforge/fontforge/fontforge/macbinary.c \ + luatexdir/luafontforge/fontforge/fontforge/macenc.c \ + luatexdir/luafontforge/fontforge/fontforge/namelist.c \ + luatexdir/luafontforge/fontforge/fontforge/ofl.h \ + luatexdir/luafontforge/fontforge/fontforge/parsepfa.c \ + luatexdir/luafontforge/fontforge/fontforge/parsettf.c \ + luatexdir/luafontforge/fontforge/fontforge/parsettfatt.c \ + luatexdir/luafontforge/fontforge/fontforge/parsettfvar.c \ + luatexdir/luafontforge/fontforge/fontforge/pfaedit.h \ + luatexdir/luafontforge/fontforge/fontforge/pfaeditui.h \ + luatexdir/luafontforge/fontforge/fontforge/plugins.h \ + luatexdir/luafontforge/fontforge/fontforge/prefs.c \ + luatexdir/luafontforge/fontforge/fontforge/psfont.h \ + luatexdir/luafontforge/fontforge/fontforge/psread.c \ + luatexdir/luafontforge/fontforge/fontforge/pua.c \ + luatexdir/luafontforge/fontforge/fontforge/sd.h \ + luatexdir/luafontforge/fontforge/fontforge/splinefill.c \ + luatexdir/luafontforge/fontforge/fontforge/splinefont.h \ + luatexdir/luafontforge/fontforge/fontforge/splineorder2.c \ + luatexdir/luafontforge/fontforge/fontforge/splineoverlap.c \ + luatexdir/luafontforge/fontforge/fontforge/splinerefigure.c \ + luatexdir/luafontforge/fontforge/fontforge/splinesave.c \ + luatexdir/luafontforge/fontforge/fontforge/splinestroke.c \ + luatexdir/luafontforge/fontforge/fontforge/splineutil.c \ + luatexdir/luafontforge/fontforge/fontforge/splineutil2.c \ + luatexdir/luafontforge/fontforge/fontforge/stamp.c \ + luatexdir/luafontforge/fontforge/fontforge/start.c \ + luatexdir/luafontforge/fontforge/fontforge/stemdb.c \ + luatexdir/luafontforge/fontforge/fontforge/stemdb.h \ + luatexdir/luafontforge/fontforge/fontforge/tottf.c \ + luatexdir/luafontforge/fontforge/fontforge/tottfgpos.c \ + luatexdir/luafontforge/fontforge/fontforge/ttf.h \ + luatexdir/luafontforge/fontforge/fontforge/tottfvar.c \ + luatexdir/luafontforge/fontforge/fontforge/ttfspecial.c \ + luatexdir/luafontforge/fontforge/fontforge/unicoderange.h \ + luatexdir/luafontforge/fontforge/fontforge/views.h \ + luatexdir/luafontforge/fontforge/inc/basics.h \ + luatexdir/luafontforge/fontforge/inc/chardata.h \ + luatexdir/luafontforge/fontforge/inc/charset.h \ + luatexdir/luafontforge/fontforge/inc/dynamic.h \ + luatexdir/luafontforge/fontforge/inc/fileutil.h \ + luatexdir/luafontforge/fontforge/inc/gdraw.h \ + luatexdir/luafontforge/fontforge/inc/gfile.h \ + luatexdir/luafontforge/fontforge/inc/ggadget.h \ + luatexdir/luafontforge/fontforge/inc/gicons.h \ + luatexdir/luafontforge/fontforge/inc/gio.h \ + luatexdir/luafontforge/fontforge/inc/gkeysym.h \ + luatexdir/luafontforge/fontforge/inc/gprogress.h \ + luatexdir/luafontforge/fontforge/inc/gresource.h \ + luatexdir/luafontforge/fontforge/inc/gwidget.h \ + luatexdir/luafontforge/fontforge/inc/gwwiconv.h \ + luatexdir/luafontforge/fontforge/inc/intl.h \ + luatexdir/luafontforge/fontforge/inc/ustring.h \ + luatexdir/luafontforge/fontforge/inc/utype.h \ + luatexdir/luafontforge/src/ffdummies.c \ + luatexdir/luafontforge/src/luafflib.c + +EXTRA_DIST += \ + luatexdir/luafontforge/ChangeLog \ + luatexdir/luafontforge/fontforge/AUTHORS \ + luatexdir/luafontforge/fontforge/INSTALL \ + luatexdir/luafontforge/fontforge/LICENSE \ + luatexdir/luafontforge/fontforge/VERSION + +## Not used +## +EXTRA_DIST += \ + luatexdir/luafontforge/Makefile \ + luatexdir/luafontforge/fontforge/Makefile \ + luatexdir/luafontforge/fontforge/Unicode/Makefile \ + luatexdir/luafontforge/fontforge/Unicode/descrip.mms \ + luatexdir/luafontforge/fontforge/descrip.mms \ + luatexdir/luafontforge/fontforge/fontforge/Makefile \ + luatexdir/luafontforge/fontforge/fontforge/descrip.mms \ + luatexdir/luafontforge/fontforge/fontforge/lff.opt \ + luatexdir/luafontforge/fontforge/fontforge/scriptfuncs.h \ + luatexdir/luafontforge/fontforge/fontforge/scripting.h \ + luatexdir/luafontforge/fontforge/fontforge/sfd1.h \ + luatexdir/luafontforge/fontforge/fontforge/stamper.c \ + luatexdir/luafontforge/fontforge/fontforge/xlib.opt + +## libluatex +## +EXTRA_LIBRARIES += libluatex.a + +libluatex_a_DEPENDENCIES = libff.a + +libluatex_a_CPPFLAGS = $(ZLIB_INCLUDES) $(LIBPNG_INCLUDES) $(XPDF_INCLUDES) +libluatex_a_CPPFLAGS += $(OBSDCOMPAT_INCLUDES) -I$(srcdir)/libmd5 +libluatex_a_CPPFLAGS += -Iluatexdir -I$(srcdir)/luatexdir -I$(srcdir)/luatexdir/lua51 +libluatex_a_CPPFLAGS += -DpdfTeX + +libluatex_a_SOURCES = \ + luatexdir/avl.c \ + luatexdir/avl.h \ + luatexdir/avlstuff.c \ + luatexdir/avlstuff.h \ + luatexdir/font/dofont.c \ + luatexdir/font/luafont.c \ + luatexdir/font/mapfile.c \ + luatexdir/font/pkin.c \ + luatexdir/font/sfnt.c \ + luatexdir/font/sfnt.h \ + luatexdir/font/subfont.c \ + luatexdir/font/texfont.c \ + luatexdir/font/texfont.h \ + luatexdir/font/tfmofm.c \ + luatexdir/font/tounicode.c \ + luatexdir/font/tt_glyf.c \ + luatexdir/font/tt_glyf.h \ + luatexdir/font/tt_table.c \ + luatexdir/font/tt_table.h \ + luatexdir/font/vfovf.c \ + luatexdir/font/vfpacket.c \ + luatexdir/font/writecff.c \ + luatexdir/font/writecff.h \ + luatexdir/font/writeenc.c \ + luatexdir/font/writefont.c \ + luatexdir/font/writet1.c \ + luatexdir/font/writet3.c \ + luatexdir/font/writettf.c \ + luatexdir/font/writettf.h \ + luatexdir/font/writetype0.c \ + luatexdir/font/writetype2.c \ + luatexdir/hyphen.h \ + luatexdir/image/epdf.c \ + luatexdir/image/epdf.h \ + luatexdir/image/image.h \ + luatexdir/image/pdftoepdf.cc \ + luatexdir/image/writeimg.c \ + luatexdir/image/writejbig2.c \ + luatexdir/image/writejbig2.h \ + luatexdir/image/writejpg.c \ + luatexdir/image/writepng.c \ + luatexdir/lang/hnjalloc.c \ + luatexdir/lang/hnjalloc.h \ + luatexdir/lang/hyphen.c \ + luatexdir/lang/texlang.c \ + luatexdir/lua/lcallbacklib.c \ + luatexdir/lua/lfontlib.c \ + luatexdir/lua/limglib.c \ + luatexdir/lua/lkpselib.c \ + luatexdir/lua/llanglib.c \ + luatexdir/lua/llualib.c \ + luatexdir/lua/lmplib.c \ + luatexdir/lua/lnodelib.c \ + luatexdir/lua/loslibext.c \ + luatexdir/lua/lpdflib.c \ + luatexdir/lua/lstatslib.c \ + luatexdir/lua/ltexiolib.c \ + luatexdir/lua/ltexlib.c \ + luatexdir/lua/ltokenlib.c \ + luatexdir/lua/luainit.c \ + luatexdir/lua/luanode.c \ + luatexdir/lua/luastuff.c \ + luatexdir/lua/luatex.c \ + luatexdir/lua/luatoken.c \ + luatexdir/lua/texluac.c \ + luatexdir/luatex-api.h \ + luatexdir/luatex.h \ + luatexdir/managed-sa.c \ + luatexdir/managed-sa.h \ + luatexdir/mathcodes.c \ + luatexdir/nodes.h \ + luatexdir/ptexmac.h \ + luatexdir/svnversion.h \ + luatexdir/tex/linebreak.c \ + luatexdir/tex/postlinebreak.c \ + luatexdir/tex/texnodes.c \ + luatexdir/tex/texpdf.c \ + luatexdir/tex/textoken.c \ + luatexdir/textcodes.c \ + luatexdir/tokens.h \ + luatexdir/utils.c \ + luatexdir/writezip.c + +nodist_libluatex_a_SOURCES = $(lua_mp_c_h) + +## We must create lua_mp_c_h before compiling the libluatex_a_SOURCES, +## but certainly don't want to create lua_mp_c_h if luaTeX is not built. +if LUATEX +$(libluatex_a_SOURCES): $(lua_mp_c_h) +endif LUATEX + +## These files are mutually dependent +lua_mp_c_h = luatexdir/mp.c luatexdir/mplib.h luatexdir/mpmp.h +lua_mp_c_h += luatexdir/mppsout.h luatexdir/psout.c +lua_mp_web = luatexdir/lua/mp.w luatexdir/lua/psout.w +$(lua_mp_c_h): mp-ctangle +mp-ctangle: ctangle $(lua_mp_web) luatexd.h + $(mkdir_p) luatexdir + CWEBINPUTS=$(srcdir)/luatexdir/lua $(ctangle) mp.w + CWEBINPUTS=$(srcdir)/luatexdir/lua $(ctangle) psout.w + rm -f $(lua_mp_c_h) + mv mp.c mplib.h mpmp.h mppsout.h psout.c luatexdir + echo timestamp >$@ + touch $(lua_mp_c_h) + +EXTRA_DIST += $(lua_mp_web) + +DISTCLEANFILES += $(lua_mp_c_h) mp-ctangle + +## included by luatexdir/font/writettf.c +EXTRA_libluatex_a_SOURCES = luatexdir/font/macnames.c + +EXTRA_DIST += \ + luatexdir/ChangeLog \ + luatexdir/NEWS \ + luatexdir/README \ + luatexdir/change-files.txt \ + luatexdir/font/subfont.txt + +## Not used (pdftosrc and ttf2afm) +## +EXTRA_DIST += \ + luatexdir/pdftosrc.1 \ + luatexdir/pdftosrc.cc \ + luatexdir/pdftosrc.rc \ + luatexdir/ttf2afm.c \ + luatexdir/ttf2afm.rc + +## included by luatexdir/ttf2afm.c +EXTRA_DIST += luatexdir/macnames.c + +## Tests + +dist_check_SCRIPTS += luatexdir/luatangle.test + +if LUATEX +TESTS += luatexdir/luatangle.test +endif LUATEX + +DISTCLEANFILES += cftest.p + +## Eventually delete these files +## +EXTRA_DIST += \ + luatexdir/.indent.pro \ + luatexdir/Makefile.in \ + luatexdir/depend.mk \ + luatexdir/font/.indent.pro \ + luatexdir/image/.indent.pro \ + luatexdir/lua/.indent.pro \ + luatexdir/luatex.mk \ + luatexdir/luatexlib.mk + diff --git a/Build/source/texk/web2c/mpdir/Makefile.in.orig b/Build/source/texk/web2c/mpdir/Makefile.in.orig new file mode 100644 index 00000000000..8b51105e713 --- /dev/null +++ b/Build/source/texk/web2c/mpdir/Makefile.in.orig @@ -0,0 +1,41 @@ +# @configure_input@ +# Makefile for libmpost - taco@elvenkind.com, but +# mostly ripped off from Makefile.in from pdftex +# $Id $ + +kpse_include ../make/common.mk +kpse_include ../make/programs.mk +kpse_include ../make/library.mk + +kpathsea_srcdir_parent = $(srcdir)/../.. +kpathsea_dir_parent = ../.. + +ALL_CXXFLAGS = @CXXFLAGS@ @DEFS@ $(XXCFLAGS) -I. -I$(srcdir) -I$(kpathsea_dir_parent) -I$(kpathsea_srcdir_parent) +CXX = @CXX@ + +XCPPFLAGS=-I.. -I$(srcdir)/.. -I../.. -I$(srcdir)/../.. + +OBJS = mapfile.o avl.o avlstuff.o utils.o writeenc.o writet1.o writefont.o turningnumber.o + +all: libmpost.a makecpool + +libmpost.a: $(OBJS) + rm -f $@ + $(AR) $(ARFLAGS) $@ $(OBJS) + $(RANLIB) $@ + +makecpool: makecpool.o + $(link_command) makecpool.o + +kpse_include ../make/clean.mk + +clean:: + rm -f libmpost.a makecpool + +depend: + rm -f $(OBJS) + XXCFLAGS=-MM XCFLAGS=-MM $(MAKE) -k $(OBJS) | \ + grep -v "^$(CC)\|$(CXX)\|$(AR)\|make" | \ + sed 's: [^ ]*/\.\./libs/[^ ]*::g' > $(srcdir)/depend.mk + +kpse_include mpdir/depend.mk diff --git a/Build/source/texk/web2c/mpdir/am/mp.am b/Build/source/texk/web2c/mpdir/am/mp.am new file mode 100644 index 00000000000..eb89d5b0e96 --- /dev/null +++ b/Build/source/texk/web2c/mpdir/am/mp.am @@ -0,0 +1,59 @@ +## texk/web2c/mpdir/am/mp.am: Makefile fragment for MetaPost. + +## MetaPost +## +if MP +bin_PROGRAMS += mpost +endif MP + +mpost_CPPFLAGS = -I$(srcdir)/mpdir +mpost_LDADD = libmpost.a $(LDADD) +mpost_c_h = mpini.c mp0.c mp1.c mp2.c mpcoerce.h mpd.h +nodist_mpost_SOURCES = $(mpost_c_h) mp-pool.c mpextra.c +$(mpost_c_h): mp-web2c +mp-web2c: mp.p $(web2c_texmf) mpdir/mp.defines web2c/cvtmf1.sed web2c/cvtmf2.sed + $(web2c) mp + echo timestamp >$@ + touch $(mpost_c_h) +EXTRA_DIST += mp.web mp.ch lib/texmfmp.c mpdir/mp.defines mpdir/mplib.h +mpextra.c: lib/texmfmp.c mpd.h + sed s/TEX-OR-MF-OR-MP/mp/ $(srcdir)/lib/texmfmp.c >$@ +mp.p mp.pool: mp-tangle +mp-tangle: tangle mp.web mp.ch + $(tangle) mp mp + echo timestamp >$@ + touch mp.p mp.pool +mp-pool.c: mp.pool $(makecpool) mpdir/mplib.h + $(makecpool) mp.pool $(srcdir)/mpdir/mplib.h >$@ || rm -f $@ +DISTCLEANFILES += $(nodist_mpost_SOURCES) mp-web2c \ + mp.p mp.pool mp-tangle + +## libmpost +## +EXTRA_LIBRARIES += libmpost.a + +libmpost_a_CPPFLAGS = -I$(srcdir)/mpdir + +libmpost_a_SOURCES = \ + mpdir/avl.c \ + mpdir/avl.h \ + mpdir/avlstuff.c \ + mpdir/avlstuff.h \ + mpdir/mapfile.c \ + mpdir/mpmac.h \ + mpdir/turningnumber.c \ + mpdir/utils.c \ + mpdir/writeenc.c \ + mpdir/writefont.c \ + mpdir/writet1.c + +## We must create mpd.h before compiling the libmpost_a_SOURCES. +$(libmpost_a_SOURCES): mpd.h + +## Eventually delete these files +## +EXTRA_DIST += \ + metapost.mk \ + mpdir/Makefile.in.orig \ + mpdir/mpostlib.mk + diff --git a/Build/source/texk/web2c/mpware/Makefile.in.orig b/Build/source/texk/web2c/mpware/Makefile.in.orig new file mode 100644 index 00000000000..d898b37884f --- /dev/null +++ b/Build/source/texk/web2c/mpware/Makefile.in.orig @@ -0,0 +1,63 @@ +# @configure_input@ +# Makefile for the MetaPost support programs. + +kpse_include ../make/paths.mk +kpse_include ../make/common.mk +kpse_include ../make/programs.mk +kpse_include kpathsea.mk + +proglib = ../lib/lib.a +programs = dmp mpto newer makempx + +default: all +all: $(programs) + +dmp: dmp.o dmp_ffile.o + $(kpathsea_link) dmp.o dmp_ffile.o $(LOADLIBES) +mpto: mpto.o + $(kpathsea_link) mpto.o +newer: newer.o + $(link_command) newer.o +makempx: makempx.o + $(kpathsea_link) makempx.o $(LOADLIBES) + +dmp.o dmp_ffile.o: dmp.h + +newer.o dmp.o makempx.o: ../c-auto.h + +checkdir = $(srcdir)/../check +check: mpto makempx newer dmp + makempx $(checkdir)/label.mp ../check/xlabel.mpx + ./mpto -tex $(checkdir)/testex.mp | diff $(checkdir)/testex.tex - + sed '16s/^%//' <$(checkdir)/testex.mp >testex1 + -mpto -tex testex1 >/dev/null 2>testex2 + sed '17s/^%//' <$(checkdir)/testex.mp >testex1 + -mpto -tex testex1 >/dev/null 2>>testex2 + sed '18s/^%//' <$(checkdir)/testex.mp >testex1 + -mpto -tex testex1 >/dev/null 2>>testex2 + sed '19s/^%//' <$(checkdir)/testex.mp >testex1 + -mpto -tex testex1 >/dev/null 2>>testex2 + sed '20s/^%//' <$(checkdir)/testex.mp >testex1 + -mpto -tex testex1 >/dev/null 2>>testex2 + diff $(checkdir)/testex.err testex2 + +Makefile: Makefile.in ../config.status + cd .. && $(SHELL) config.status + +install: install-exec install-data +install-exec: $(programs) + $(SHELL) $(top_srcdir)/../mkinstalldirs $(bindir) $(scriptdir) + $(INSTALL_PROGRAM) newer $(bindir)/newer + $(INSTALL_LIBTOOL_PROG) dmp $(bindir) + $(INSTALL_LIBTOOL_PROG) mpto $(bindir) + $(INSTALL_LIBTOOL_PROG) makempx $(bindir) +install-data: + +kpse_include ../make/tkpathsea.mk +kpse_include ../make/clean.mk + +mostlyclean:: + rm -f testex1 testex2 + +kpse_include ../make/rdepend.mk +kpse_include mpware/depend.mk diff --git a/Build/source/texk/web2c/omegadir/am/omega.am b/Build/source/texk/web2c/omegadir/am/omega.am new file mode 100644 index 00000000000..77d97ab50ed --- /dev/null +++ b/Build/source/texk/web2c/omegadir/am/omega.am @@ -0,0 +1,88 @@ +## texk/web2c/omegadir/am/omega.am: Makefile fragment for Omega. + +## Omega +## +if OMEGA +bin_PROGRAMS += omega +endif OMEGA + +## With --enable-ipc, Omega may need to link with -lsocket. +omega_LDADD = $(LDADD) $(socketlibs) + +omega_CPPFLAGS = -I$(srcdir)/omegadir $(AM_CPPFLAGS) +omega_c_h = omegaini.c omega0.c omega1.c omega2.c omega3.c omegacoerce.h omegad.h +nodist_omega_SOURCES = $(omega_c_h) omega-pool.c omegaextra.c +omega_SOURCES = \ + omegadir/omega.c \ + omegadir/omegabis.c \ + omegadir/omegaextra.h \ + omegadir/omegamem.h \ + omegadir/omega-pool.h +## We must create omegad.h before compiling the omega_SOURCES, +## but certainly don't want to create omegad.h if Omega is not built. +if OMEGA +$(omega_SOURCES): omegad.h +endif OMEGA +$(omega_c_h): omega-web2c +omega-web2c: omega.p $(web2c_texmf) omegadir/omega.defines + $(web2c) omega + echo timestamp >$@ + touch $(omega_c_h) +omegaextra.c: lib/texmfmp.c omegad.h + sed s/TEX-OR-MF-OR-MP/omega/ $(srcdir)/lib/texmfmp.c >$@ +omega.p omega.pool: omega-tangle +omega-tangle: otangle omega.web omega.ch + $(otangle) omega omega + echo timestamp >$@ + touch omega.p omega.pool +omega-pool.c: omega.pool $(makecpool) omegadir/omega-pool.h + $(makecpool) omega.pool $(srcdir)/omegadir/omega-pool.h >$@ || rm -f $@ +## Generate omega.web +omega_web_srcs = \ + tex.web \ + omegadir/omnode.ch \ + omegadir/om16bit.ch \ + omegadir/omstr.ch \ + omegadir/omfont.ch \ + omegadir/omchar.ch \ + omegadir/omfi.ch \ + omegadir/ompar.ch \ + omegadir/omocp.ch \ + omegadir/omfilter.ch \ + omegadir/omtrans.ch \ + omegadir/omdir.ch \ + omegadir/omcprt.ch \ + omegadir/omxml.ch +omega.web: $(TIE) $(omega_web_srcs) + $(tie) -m omega.web $(omega_web_srcs) +## Generate omega.ch +omega_ch_srcs = \ + omegadir/comnode.ch \ + omegadir/com16bit.ch \ + omegadir/comstr.ch \ + omegadir/comfont.ch \ + omegadir/comchar.ch \ + omegadir/comfi.ch \ + omegadir/compar.ch \ + omegadir/comocp.ch \ + omegadir/comfilter.ch \ + omegadir/comtrans.ch \ + omegadir/comdir.ch \ + omegadir/comxml.ch \ + omegadir/comsrcspec.ch +omega.ch: $(TIE) omega.web $(omega_ch_srcs) + $(tie) -c omega.ch omega.web $(omega_ch_srcs) +EXTRA_DIST += $(omega_web_srcs) $(omega_ch_srcs) lib/texmfmp.c +DISTCLEANFILES += $(nodist_omega_SOURCES) omega.web omega.ch omega-web2c \ + omega.p omega.pool omega-tangle + +EXTRA_DIST += \ + omegadir/ChangeLog \ + omegadir/README \ + omegadir/omega.defines \ + omegadir/omega.version + +## Eventually delete these files +## +EXTRA_DIST += omegadir/omega.mk + diff --git a/Build/source/texk/web2c/omegafonts/Makefile.in.orig b/Build/source/texk/web2c/omegafonts/Makefile.in.orig new file mode 100644 index 00000000000..9fb8d3f1cf7 --- /dev/null +++ b/Build/source/texk/web2c/omegafonts/Makefile.in.orig @@ -0,0 +1,73 @@ +# @configure_input@ +# Makefile for omegafonts. + +# These get expanded from the parent directory, not this one. +kpse_include ../make/common.mk +kpse_include ../make/programs.mk +kpse_include ../make/paths.mk +kpse_include kpathsea.mk + +LEX = @LEX@ +#LEXLIB = @LEXLIB@ +LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ +YACC = @YACC@ + +proglib = ../lib/lib.a +programs = omfonts +linked_programs = ofm2opl opl2ofm ovf2ovp ovp2ovf +scripts = + +omfonts_objects = omfonts.o y_tab.o $(LEX_OUTPUT_ROOT).o \ + char_routines.o dimen_routines.o error_routines.o \ + header_routines.o ligkern_routines.o list_routines.o \ + out_routines.o param_routines.o print_routines.o \ + font_routines.o extra_routines.o out_ofm.o \ + parse_ofm.o +h_files = char_routines.h dimen_routines.h error_routines.h \ + font_routines.h header_routines.h ligkern_routines.h \ + list_routines.h out_routines.h param_routines.h print_routines.h \ + extra_routines.h manifests.h parser.h out_ofm.h dvi.h \ + parse_ofm.h omfonts.h + +all: $(programs) +$(omfonts_objects): Makefile +omfonts: $(omfonts_objects) + $(kpathsea_link) $(omfonts_objects) $(LEXLIB) $(LOADLIBES) + +omfonts.o: omfonts.c y_tab.h +y_tab.c y_tab.h: pl.y + $(YACC) -d -v $(srcdir)/pl.y + -test -f y.tab.c && mv -f y.tab.c y_tab.c + -test -f y.tab.h && mv -f y.tab.h y_tab.h +$(LEX_OUTPUT_ROOT).o: parser.h y_tab.h +$(LEX_OUTPUT_ROOT).c: pl.l + $(LEX) $(srcdir)/pl.l + + + +$(programs): $(proglib) $(kpathsea) + +$(omfonts_objects): $(h_files) + +install: install-exec +install-exec:: install-links + +install-programs: $(programs) + $(SHELL) $(top_srcdir)/../mkinstalldirs $(bindir) + for p in $(programs); do $(INSTALL_LIBTOOL_PROG) $$p $(bindir); done + +install-links: install-programs + for f in ""$(linked_programs); do \ + cd $(bindir) && (rm -f $$f; $(LN) omfonts $$f); done + +Makefile: Makefile.in ../config.status + cd .. && $(SHELL) config.status + +kpse_include ../make/tkpathsea.mk +kpse_include ../make/clean.mk + +clean:: + rm -f y_tab.c y_tab.h y.out* yacc.* $(LEX_OUTPUT_ROOT).c + +kpse_include ../make/rdepend.mk +kpse_include omegafonts/depend.mk diff --git a/Build/source/texk/web2c/omegaware/am/omegaware.am b/Build/source/texk/web2c/omegaware/am/omegaware.am new file mode 100644 index 00000000000..acb4102d308 --- /dev/null +++ b/Build/source/texk/web2c/omegaware/am/omegaware.am @@ -0,0 +1,106 @@ +## texk/web2c/omegaware/am/omegaware.am: Makefile fragment for omegaware web programs. + +omegaware_tools = odvicopy odvitype otangle +omegaware_font_tools = ofm2opl opl2ofm ovf2ovp ovp2ovf +omegaware_programs = $(omegaware_tools) $(omegaware_font_tools) + +if OTANGLE +bin_PROGRAMS += $(omegaware_tools) +if !OMFONTS +bin_PROGRAMS += $(omegaware_font_tools) +endif !OMFONTS +endif OTANGLE + +EXTRA_DIST += omegaware/ChangeLog +DISTCLEANFILES += $(omegaware_programs:=.c) $(omegaware_programs:=.h) \ + $(omegaware_programs:=.p) $(omegaware_programs:=-web2c) + +ow_tangle = WEBINPUTS=$(srcdir)/omegaware $(buildenv) $(TANGLE) + +nodist_odvicopy_SOURCES = odvicopy.c odvicopy.h +odvicopy.c odvicopy.h: odvicopy-web2c +odvicopy-web2c: $(web2c_common) $(web2c_programs) odvicopy.p + $(web2c) odvicopy + echo timestamp >$@ + touch odvicopy.c odvicopy.h +EXTRA_DIST += $(odvicopy_sources) +odvicopy_sources = omegaware/odvicopy.web omegaware/odvicopy.ch +odvicopy.p: tangle $(odvicopy_sources) + $(ow_tangle) odvicopy odvicopy + +nodist_odvitype_SOURCES = odvitype.c odvitype.h +odvitype.c odvitype.h: odvitype-web2c +odvitype-web2c: $(web2c_common) $(web2c_programs) odvitype.p + $(web2c) odvitype + echo timestamp >$@ + touch odvitype.c odvitype.h +EXTRA_DIST += $(odvitype_sources) +odvitype_sources = omegaware/odvitype.web omegaware/odvitype.ch +odvitype.p: tangle $(odvitype_sources) + $(ow_tangle) odvitype odvitype + +nodist_ofm2opl_SOURCES = ofm2opl.c ofm2opl.h +ofm2opl.c ofm2opl.h: ofm2opl-web2c +ofm2opl-web2c: $(web2c_common) $(web2c_programs) ofm2opl.p + $(web2c) ofm2opl + echo timestamp >$@ + touch ofm2opl.c ofm2opl.h +EXTRA_DIST += $(ofm2opl_sources) +ofm2opl_sources = omegaware/ofm2opl.web omegaware/ofm2opl.ch +ofm2opl.p: tangle $(ofm2opl_sources) + $(ow_tangle) ofm2opl ofm2opl + +nodist_opl2ofm_SOURCES = opl2ofm.c opl2ofm.h +opl2ofm.c opl2ofm.h: opl2ofm-web2c +opl2ofm-web2c: $(web2c_common) $(web2c_programs) opl2ofm.p + $(web2c) opl2ofm + echo timestamp >$@ + touch opl2ofm.c opl2ofm.h +EXTRA_DIST += $(opl2ofm_sources) +opl2ofm_sources = omegaware/opl2ofm.web omegaware/opl2ofm.ch +opl2ofm.p: tangle $(opl2ofm_sources) + $(ow_tangle) opl2ofm opl2ofm + +nodist_otangle_SOURCES = otangle.c otangle.h +otangle.c otangle.h: otangle-web2c +otangle-web2c: $(web2c_common) $(web2c_programs) otangle.p + $(web2c) otangle + echo timestamp >$@ + touch otangle.c otangle.h +EXTRA_DIST += $(otangle_sources) +otangle_sources = omegaware/otangle.web omegaware/otangle.ch +otangle.p: tangle $(otangle_sources) + $(ow_tangle) otangle otangle + +nodist_ovf2ovp_SOURCES = ovf2ovp.c ovf2ovp.h +ovf2ovp.c ovf2ovp.h: ovf2ovp-web2c +ovf2ovp-web2c: $(web2c_common) $(web2c_programs) ovf2ovp.p + $(web2c) ovf2ovp + echo timestamp >$@ + touch ovf2ovp.c ovf2ovp.h +EXTRA_DIST += $(ovf2ovp_sources) +ovf2ovp_sources = omegaware/ovf2ovp.web omegaware/ovf2ovp.ch +ovf2ovp.p: tangle $(ovf2ovp_sources) + $(ow_tangle) ovf2ovp ovf2ovp + +nodist_ovp2ovf_SOURCES = ovp2ovf.c ovp2ovf.h +ovp2ovf.c ovp2ovf.h: ovp2ovf-web2c +ovp2ovf-web2c: $(web2c_common) $(web2c_programs) ovp2ovf.p + $(web2c) ovp2ovf + echo timestamp >$@ + touch ovp2ovf.c ovp2ovf.h +EXTRA_DIST += $(ovp2ovf_sources) +ovp2ovf_sources = omegaware/ovp2ovf.web omegaware/ovp2ovf.ch +ovp2ovf.p: tangle $(ovp2ovf_sources) + $(ow_tangle) ovp2ovf ovp2ovf + +## Tests + +dist_check_SCRIPTS += omegaware/otangle.test + +if OTANGLE +TESTS += omegaware/otangle.test +endif OTANGLE + +DISTCLEANFILES += cftest.p + diff --git a/Build/source/texk/web2c/omegaware/otangle.test b/Build/source/texk/web2c/omegaware/otangle.test new file mode 100755 index 00000000000..e045d106582 --- /dev/null +++ b/Build/source/texk/web2c/omegaware/otangle.test @@ -0,0 +1,7 @@ +#! /bin/sh + +TEXMFCNF=$srcdir/../kpathsea WEBINPUTS=$srcdir/cftests \ + ./otangle cftest cftest || exit 1 + +diff cftest.p $srcdir/cftests/ocftest.p || exit 1 + diff --git a/Build/source/texk/web2c/otps/Makefile.in.orig b/Build/source/texk/web2c/otps/Makefile.in.orig new file mode 100644 index 00000000000..ee81a2d2a9c --- /dev/null +++ b/Build/source/texk/web2c/otps/Makefile.in.orig @@ -0,0 +1,53 @@ +# @configure_input@ +# Makefile for otps. + +# These get expanded from the parent directory, not this one. +kpse_include ../make/common.mk +kpse_include ../make/programs.mk +kpse_include ../make/paths.mk +kpse_include kpathsea.mk + +LEX = @LEX@ +LEXLIB = @LEXLIB@ +LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ +YACC = @YACC@ + +proglib = ../lib/lib.a +programs = otp2ocp outocp +scripts = mkocp mkofm + +otp2ocp_objects = otp2ocp.o routines.o y_tab.o $(LEX_OUTPUT_ROOT).o +all: $(programs) +otp2ocp: $(otp2ocp_objects) + $(kpathsea_link) $(otp2ocp_objects) $(LEXLIB) $(LOADLIBES) + +otp2ocp.o: otp2ocp.c y_tab.h +y_tab.c y_tab.h: otp.y + $(YACC) -d -v $(srcdir)/otp.y + -test -f y.tab.c && mv -f y.tab.c y_tab.c + -test -f y.tab.h && mv -f y.tab.h y_tab.h +$(LEX_OUTPUT_ROOT).o: otp.h +$(LEX_OUTPUT_ROOT).c: otp.l + $(LEX) $(srcdir)/otp.l + +outocp: outocp.o + $(kpathsea_link) outocp.o $(LOADLIBES) + +$(programs): $(proglib) $(kpathsea) + +install-programs: $(programs) + $(SHELL) $(top_srcdir)/../mkinstalldirs $(bindir) + for p in $(programs); do $(INSTALL_LIBTOOL_PROG) $$p $(bindir); done + for p in $(scripts); do $(INSTALL_SCRIPT) $(srcdir)/$$p $(scriptdir); done + +Makefile: Makefile.in ../config.status + cd .. && $(SHELL) config.status + +kpse_include ../make/tkpathsea.mk +kpse_include ../make/clean.mk + +clean:: + rm -f y_tab.c y_tab.h y.out* yacc.* $(LEX_OUTPUT_ROOT).c + +kpse_include ../make/rdepend.mk +kpse_include otps/depend.mk diff --git a/Build/source/texk/web2c/pdftexdir/Makefile.in.orig b/Build/source/texk/web2c/pdftexdir/Makefile.in.orig new file mode 100644 index 00000000000..23b083a5be0 --- /dev/null +++ b/Build/source/texk/web2c/pdftexdir/Makefile.in.orig @@ -0,0 +1,71 @@ +# Makefile for libpdf - te@dbs.uni-hannover.de +# $Id$ + +kpse_include ../make/common.mk +kpse_include ../make/programs.mk +kpse_include ../make/library.mk + +kpathsea_srcdir_parent = $(srcdir)/../.. +kpathsea_dir_parent = ../.. + +ALL_CXXFLAGS = @CXXFLAGS@ @DEFS@ $(XXCFLAGS) \ + -I. -I$(srcdir) \ + -I$(kpathsea_dir_parent) -I$(kpathsea_srcdir_parent) \ + @LIBXPDFCPPFLAGS@ \ + -I$(LIBOBSDCOMPATDIR) -I$(LIBOBSDCOMPATDIR)/.. \ + -I$(LIBOBSDCOMPATSRCDIR) -I$(LIBOBSDCOMPATSRCDIR)/.. \ + -DPDF_PARSER_ONLY +CXX = @CXX@ + +.SUFFIXES: .cc .o +.cc.o: + $(CXX) $(ALL_CXXFLAGS) -c $< + +# XCFLAGS=-Wstrict-prototypes -Wmissing-prototypes + +LIBPNGDIR=../../../libs/libpng +LIBPNGSRCDIR=$(srcdir)/$(LIBPNGDIR) + +ZLIBDIR=../../../libs/zlib +ZLIBSRCDIR=$(srcdir)/$(ZLIBDIR) + +LIBXPDFDIR=../../../libs/xpdf +LIBXPDFSRCDIR=$(srcdir)/$(LIBXPDFDIR) + +LIBMD5DIR=../../../libs/md5 +LIBMD5SRCDIR=$(srcdir)/$(LIBMD5DIR) + +LIBOBSDCOMPATDIR=../../../libs/obsdcompat +LIBOBSDCOMPATSRCDIR=$(srcdir)/$(LIBOBSDCOMPATDIR) + +XCPPFLAGS=-I.. -I$(srcdir)/.. -I../.. -I$(srcdir)/../.. -I$(LIBMD5DIR) \ + -I$(LIBMD5SRCDIR) @LIBPNGCPPFLAGS@ @ZLIBCPPFLAGS@ \ + -I$(LIBXPDFDIR) -I$(LIBXPDFDIR)/.. -I$(LIBXPDFSRCDIR) -I$(LIBXPDFSRCDIR)/.. \ + -I$(LIBOBSDCOMPATDIR) -I$(LIBOBSDCOMPATDIR)/.. -I$(LIBOBSDCOMPATSRCDIR) \ + -I$(LIBOBSDCOMPATSRCDIR)/.. -DpdfTeX + +OBJS = epdf.o mapfile.o utils.o vfpacket.o pkin.o \ +writefont.o writet1.o writet3.o writezip.o writeenc.o writettf.o \ +writejpg.o writejbig2.o writepng.o writeimg.o pdftoepdf.o avl.o avlstuff.o subfont.o tounicode.o + +all: libpdf.a + +pdftosrc.o: $(srcdir)/pdftosrc.cc + +libpdf.a: $(OBJS) + rm -f $@ + $(AR) $(ARFLAGS) $@ $(OBJS) + $(RANLIB) $@ + +kpse_include ../make/clean.mk + +clean:: + rm -f libpdf.a ttf2afm pdftosrc + +depend: + rm -f $(OBJS) ttf2afm.o pdftosrc.o + XXCFLAGS=-MM XCFLAGS=-MM $(MAKE) -k $(OBJS) ttf2afm.o pdftosrc.o | \ + grep -v "^$(CC)\|$(CXX)\|$(AR)\|make\" | \ + sed 's: [^ ]*/\.\./libs/[^ ]*::g' > $(srcdir)/depend.mk + +kpse_include pdftexdir/depend.mk diff --git a/Build/source/texk/web2c/pdftexdir/am/pdftex.am b/Build/source/texk/web2c/pdftexdir/am/pdftex.am new file mode 100644 index 00000000000..f51b3a3e4af --- /dev/null +++ b/Build/source/texk/web2c/pdftexdir/am/pdftex.am @@ -0,0 +1,163 @@ +## texk/web2c/pdftexdir/am/pdftex.am: Makefile fragment for pdfTeX. + +pdftex_cppflags = $(ZLIB_INCLUDES) $(LIBPNG_INCLUDES) $(XPDF_INCLUDES) +pdftex_cppflags += $(OBSDCOMPAT_INCLUDES) -I$(srcdir)/libmd5 +pdftex_cppflags += -I$(srcdir)/pdftexdir + +pdftex_ldadd = libpdftex.a $(LIBPNG_LIBS) $(ZLIB_LIBS) $(XPDF_LIBS) +pdftex_ldadd += $(OBSDCOMPAT_LIBS) libmd5.a + +pdftex_dependencies = $(proglib) +pdftex_dependencies += $(LIBPNG_DEPEND) $(ZLIB_DEPEND) $(XPDF_DEPEND) +pdftex_dependencies += $(OBSDCOMPAT_DEPEND) libmd5.a + +## pdfTeX +## +if PDFTEX +bin_PROGRAMS += pdftex +endif PDFTEX + +## Force Automake to use CXXLD for linking +nodist_EXTRA_pdftex_SOURCES = dummy.cxx + +pdf_tangle = WEBINPUTS=.:$(srcdir)/pdftexdir $(buildenv) $(TANGLE) + +pdftex_CPPFLAGS = $(pdftex_cppflags) + +pdftex_LDADD = $(pdftex_ldadd) $(LDADD) $(socketlibs) + +pdftex_DEPENDENCIES = $(pdftex_dependencies) libpdftex.a + +pdftex_c_h = pdftexini.c pdftex0.c pdftex1.c pdftex2.c pdftex3.c pdftexcoerce.h pdftexd.h +nodist_pdftex_SOURCES = $(pdftex_c_h) pdftex-pool.c pdftexextra.c pdftexdir/pdftexextra.h +$(pdftex_c_h): pdftex-web2c +pdftex-web2c: pdftex.p $(web2c_texmf) pdftexdir/pdftex.defines + $(web2c) pdftex + : $(synctex_convert_pdftex) + echo timestamp >$@ + touch $(pdftex_c_h) +pdftexextra.c: pdftexd.h pdftexdir/pdftexextra.h lib/texmfmp.c pdftexd.h + sed s/TEX-OR-MF-OR-MP/pdftex/ $(srcdir)/lib/texmfmp.c >$@ +pdftex.p pdftex.pool: pdftex-tangle +pdftex-tangle: tangle pdftexdir/pdftex.web pdftex.ch + $(pdf_tangle) pdftex pdftex + echo timestamp >$@ + touch pdftex.p pdftex.pool +pdftex-pool.c: pdftex.pool $(makecpool) pdftexdir/ptexlib.h pdftexd.h + $(makecpool) pdftex.pool pdftexdir/ptexlib.h >$@ || rm -f $@ +## Extract pdftex version +pdftexdir/pdftex.version: pdftexdir/pdftex.web + $(mkdir_p) pdftexdir + grep '^@d pdftex_version_string==' $(srcdir)/pdftexdir/pdftex.web \ + | sed "s/^.*'-//;s/'.*$$//" >pdftexdir/pdftex.version +pdftexdir/pdftexextra.h: pdftexdir/pdftexextra.in pdftexdir/pdftex.version etexdir/etex.version + sed -e s/PDFTEX-VERSION/`cat $(pdftexdir)/pdftex.version`/ \ + -e s/ETEX-VERSION/`cat etexdir/etex.version`/ \ + $(srcdir)/pdftexdir/pdftexextra.in >$@ +## Generate pdftex.ch +pdftex.ch: $(TIE) $(pdftex_ch_srcs) + $(tie) -c pdftex.ch $(pdftex_ch_srcs) +pdftex_ch_srcs = \ + pdftexdir/pdftex.web \ + pdftexdir/tex.ch0 \ + tex.ch \ + $(pdftex_ch_synctex) \ + pdftexdir/pdftex.ch +## +EXTRA_DIST += $(pdftex_ch_srcs) \ + pdftexdir/pdftex.defines pdftexdir/pdftex.h pdftexdir/pdftexextra.in + +DISTCLEANFILES += $(nodist_pdftex_SOURCES) pdftex.ch pdftex-web2c \ + pdftex.p pdftex.pool pdftex-tangle pdftexdir/pdftex.version + +## ttf2afm +## +bin_PROGRAMS += ttf2afm + +ttf2afm_CPPFLAGS = -I$(srcdir)/pdftexdir + +ttf2afm_SOURCES = pdftexdir/ttf2afm.c + +## included by pdftexdir/ttf2afm.c +EXTRA_ttf2afm_SOURCES = pdftexdir/macnames.c + +## pdftosrc +## +bin_PROGRAMS += pdftosrc + +## Force Automake to use CXXLD for linking +nodist_EXTRA_pdftosrc_SOURCES = dummy.cxx + +pdftosrc_CPPFLAGS = $(pdftex_cppflags) + +pdftosrc_SOURCES = pdftexdir/pdftosrc.cc + +pdftosrc_LDADD = $(pdftex_ldadd) $(LDADD) + +pdftosrc_DEPENDENCIES = $(pdftex_dependencies) libpdftex.a + +## libpdftex +## +EXTRA_LIBRARIES += libpdftex.a + +libpdftex_a_CPPFLAGS = $(pdftex_cppflags) + +libpdftex_a_SOURCES = \ + pdftexdir/avl.c \ + pdftexdir/avl.h \ + pdftexdir/avlstuff.c \ + pdftexdir/avlstuff.h \ + pdftexdir/epdf.c \ + pdftexdir/epdf.h \ + pdftexdir/image.h \ + pdftexdir/mapfile.c \ + pdftexdir/pdftex.h \ + pdftexdir/pdftoepdf.cc \ + pdftexdir/pkin.c \ + pdftexdir/ptexlib.h \ + pdftexdir/ptexmac.h \ + pdftexdir/subfont.c \ + pdftexdir/tounicode.c \ + pdftexdir/utils.c \ + pdftexdir/vfpacket.c \ + pdftexdir/writeenc.c \ + pdftexdir/writefont.c \ + pdftexdir/writeimg.c \ + pdftexdir/writejbig2.c \ + pdftexdir/writejbig2.h \ + pdftexdir/writejpg.c \ + pdftexdir/writepng.c \ + pdftexdir/writet1.c \ + pdftexdir/writet3.c \ + pdftexdir/writettf.c \ + pdftexdir/writettf.h \ + pdftexdir/writezip.c + +## We must create pdftexd.h before compiling the libpdftex_a_SOURCES, +## but certainly don't want to create pdftexd.h if pdfTeX is not built. +if PDFTEX +$(libpdftex_a_SOURCES): pdftexd.h +endif PDFTEX + +## included by pdftexdir/writettf.c +EXTRA_libpdftex_a_SOURCES = pdftexdir/macnames.c + +EXTRA_DIST += \ + pdftexdir/ChangeLog \ + pdftexdir/NEWS \ + pdftexdir/README \ + pdftexdir/change-files.txt + +## Not used +## +EXTRA_DIST += \ + pdftexdir/.indent.pro \ + pdftexdir/pdftex.mak + +## Eventually delete these files +## +EXTRA_DIST += \ + pdftexdir/Makefile.in.orig \ + pdftexdir/pdftex.mk \ + pdftexdir/pdftexlib.mk + diff --git a/Build/source/texk/web2c/synctexdir/am/synctex.am b/Build/source/texk/web2c/synctexdir/am/synctex.am new file mode 100644 index 00000000000..03d793eac69 --- /dev/null +++ b/Build/source/texk/web2c/synctexdir/am/synctex.am @@ -0,0 +1,172 @@ +## texk/web2c/synctexdir/am/synctex.am: Makefile fragment for SyncTeX. + +## The SyncTeX tool + +bin_PROGRAMS += synctex + +synctex_SOURCES = \ + synctexdir/synctex_main.c \ + synctexdir/synctex_parser.c \ + synctexdir/synctex_parser.h \ + synctexdir/synctex_parser_local.h + +synctex_CPPFLAGS = -I$(srcdir)/synctexdir $(ZLIB_INCLUDES) -DSYNCTEX_USE_LOCAL_HEADER + +synctex_LDADD = $(ZLIB_LIBS) + +synctex_DEPENDENCIES = $(ZLIB_DEPEND) + +dist_man_MANS += synctexdir/man1/synctex.1 synctexdir/man5/synctex.5 + +EXTRA_DIST += \ + synctexdir/INSTALL \ + synctexdir/Makefile \ + synctexdir/Makefile.in \ + synctexdir/README.txt + +## SyncTeX infrastructure: common for all engines + +EXTRA_DIST += \ + synctexdir/synctex-common.h \ + synctexdir/synctex-convert.sh \ + synctexdir/synctex.c \ + synctexdir/synctex.defines \ + synctexdir/synctex.h + +## SyncTeX infrastructure: TeX + +if TEX_SYNCTEX + +tex_CPPFLAGS += -I$(srcdir)/synctexdir $(ZLIB_INCLUDES) + +tex_LDADD += $(ZLIB_LIBS) + +tex_ch_synctex = \ + synctexdir/synctex-mem.ch0 \ + synctexdir/synctex-mem.ch1 \ + synctexdir/synctex-mem.ch2 \ + synctexdir/synctex-rec.ch0 \ + synctexdir/synctex-rec.ch1 \ + synctexdir/synctex-rec.ch2 + +dist_tex_SOURCES = \ + synctexdir/synctex.h \ + synctexdir/synctex-common.h \ + synctexdir/synctex-tex.h + +nodist_tex_SOURCES += \ + synctex.c + +synctex_convert_tex = && $(SHELL) $(srcdir)/synctexdir/synctex-convert.sh tex + +else !TEX_SYNCTEX + +synctex_convert_tex = && echo "warning: SyncTeX for TeX is NOT enabled" + +endif !TEX_SYNCTEX + +synctex.c: texd.h synctexdir/synctex.c $(dist_tex_SOURCES) + sed s/TEX-OR-MF-OR-MP/tex/ $(srcdir)/synctexdir/synctex.c >$@ + +EXTRA_DIST += \ + synctexdir/synctex-mem.ch0 \ + synctexdir/synctex-mem.ch1 \ + synctexdir/synctex-mem.ch2 \ + synctexdir/synctex-rec.ch0 \ + synctexdir/synctex-rec.ch1 \ + synctexdir/synctex-rec.ch2 + +## SyncTeX infrastructure: e-TeX + +if ETEX_SYNCTEX + +etex_CPPFLAGS += -I$(srcdir)/synctexdir $(ZLIB_INCLUDES) + +etex_LDADD += $(ZLIB_LIBS) + +etex_ch_synctex = \ + synctexdir/synctex-mem.ch0 \ + synctexdir/synctex-mem.ch1 \ + synctexdir/synctex-e-mem.ch0 \ + synctexdir/synctex-e-mem.ch1 \ + synctexdir/synctex-rec.ch0 \ + synctexdir/synctex-rec.ch1 \ + synctexdir/synctex-e-rec.ch0 \ + synctexdir/synctex-e-rec.ch1 + +dist_etex_SOURCES = \ + synctexdir/synctex.h \ + synctexdir/synctex-common.h \ + synctexdir/synctex-etex.h + +nodist_etex_SOURCES += \ + synctex-e.c + +synctex_convert_etex = && $(SHELL) $(srcdir)/synctexdir/synctex-convert.sh etex + +else !ETEX_SYNCTEX + +synctex_convert_etex = && echo "warning: SyncTeX for e-TeX is NOT enabled" + +endif !ETEX_SYNCTEX + +synctex-e.c: etexd.h synctexdir/synctex.c $(dist_etex_SOURCES) + sed s/TEX-OR-MF-OR-MP/etex/ $(srcdir)/synctexdir/synctex.c >$@ + +EXTRA_DIST += \ + synctexdir/synctex-e-mem.ch0 \ + synctexdir/synctex-e-mem.ch1 \ + synctexdir/synctex-e-rec.ch0 \ + synctexdir/synctex-e-rec.ch1 + +## SyncTeX infrastructure: pdfTeX + +if PDFTEX_SYNCTEX + +pdftex_CPPFLAGS += -I$(srcdir)/synctexdir + +pdftex_ch_synctex = \ + synctexdir/synctex-mem.ch0 \ + synctexdir/synctex-mem.ch1 \ + synctexdir/synctex-e-mem.ch0 \ + synctexdir/synctex-e-mem.ch1 \ + synctexdir/synctex-rec.ch0 \ + synctexdir/synctex-rec.ch1 \ + synctexdir/synctex-e-rec.ch0 \ + synctexdir/synctex-e-rec.ch1 \ + synctexdir/synctex-pdf-rec.ch2 + +dist_pdftex_SOURCES = \ + synctexdir/synctex.h \ + synctexdir/synctex-common.h \ + synctexdir/synctex-pdftex.h + +nodist_pdftex_SOURCES += \ + synctex-pdf.c + +synctex_convert_pdftex = && $(SHELL) $(srcdir)/synctexdir/synctex-convert.sh pdftex + +else !PDFTEX_SYNCTEX + +synctex_convert_pdftex = && echo "warning: SyncTeX for pdfTeX is NOT enabled" + +endif !PDFTEX_SYNCTEX + +synctex-pdf.c: pdftexd.h synctexdir/synctex.c $(dist_pdftex_SOURCES) + sed s/TEX-OR-MF-OR-MP/pdftex/ $(srcdir)/synctexdir/synctex.c >$@ + +EXTRA_DIST += \ + synctexdir/synctex-pdf-rec.ch2 + +## SyncTeX infrastructure: XeTeX + +EXTRA_DIST += \ + synctexdir/synctex-xe-mem.ch2 \ + synctexdir/synctex-xe-rec.ch2 \ + synctexdir/synctex-xe-rec.ch3 \ + synctexdir/synctex-xetex.h + +## Eventually delete these files +## +EXTRA_DIST += synctexdir/am/synctex.mk synctexdir/synctex.mk + diff --git a/Build/source/texk/web2c/synctexdir/am/synctex.mk b/Build/source/texk/web2c/synctexdir/am/synctex.mk new file mode 100644 index 00000000000..3f3c4a0293a --- /dev/null +++ b/Build/source/texk/web2c/synctexdir/am/synctex.mk @@ -0,0 +1,42 @@ + +### SyncTeX support in xetex +# Actually, xetex cannot build without SyncTeX because the tex.web +# code does not provide proper entry points +# list of change files +xetex_ch_srcs-with_synctex-mem_only = \ + $(synctex_dir)/synctex-mem.ch0 \ + $(synctex_dir)/synctex-e-mem.ch0 \ + $(synctex_dir)/synctex-e-mem.ch1 \ + $(synctex_dir)/synctex-xe-mem.ch2 +xetex_ch_srcs-with_synctex = \ + $(xetex_ch_srcs-with_synctex-mem_only) \ + $(synctex_dir)/synctex-rec.ch0 \ + $(synctex_dir)/synctex-e-rec.ch0 \ + $(synctex_dir)/synctex-xe-rec.ch2 +xetex_ch_srcs-without_synctex = +xetex_post_ch_srcs-with_synctex = \ + $(synctex_dir)/synctex-xe-rec.ch3 +xetex_post_ch_srcs-without_synctex = +# The C sources and headers +xetex_o-with_synctex = synctex-xe.o +xetex_o-without_synctex = +synctex-xe.h: $(synctex_dir)/synctex.h + cat $(synctex_dir)/synctex.h >$@ +synctex-xetex.h: $(synctex_dir)/$@ + cat $(synctex_dir)/$@ >$@ +synctex-xe.c: xetexd.h $(synctex_dir)/synctex.c synctex-xetex.h + sed s/TEX-OR-MF-OR-MP/xetex/ $(synctex_dir)/synctex.c >$@ +xetexd.h-with_synctex = if test -z "`grep __SyncTeX__ xetexd.h`";\ + then\ + $(synctex_common_texd);\ + sed -f synctex_sed_command.txt xetexd.h > synctex_xetexd.h;\ + mv synctex_xetexd.h xetexd.h;\ + if test -z "`grep __SyncTeX__ xetexd.h`";\ + then\ + echo "warning: SyncTeX activation FAILED";\ + exit 1;\ + fi;\ + echo "warning: SyncTeX is enabled";\ + fi +xetexd.h-without_synctex = echo "warning: SyncTeX is NOT enabled" + diff --git a/Build/source/texk/web2c/tiedir/tie.test b/Build/source/texk/web2c/tiedir/tie.test new file mode 100755 index 00000000000..7f25fdc4e64 --- /dev/null +++ b/Build/source/texk/web2c/tiedir/tie.test @@ -0,0 +1,12 @@ +#! /bin/sh + +TEXMFCNF=$srcdir/../kpathsea WEBINPUTS=$srcdir/tiedir \ + ./tie -c tie.outc tie.tie tie.cf1 tie.cf2 tie.cf3 || exit 1 + +diff tie.outc $srcdir/tiedir/tie.chf.gen || exit 1 + +TEXMFCNF=$srcdir/../kpathsea WEBINPUTS=$srcdir/tiedir \ + ./tie -m tie.outm tie.tie tie.cf1 tie.cf2 tie.cf3 || exit 1 + +diff tie.outm $srcdir/tiedir/tie.master.gen || exit 1 + diff --git a/Build/source/texk/web2c/web2c/native/config.h b/Build/source/texk/web2c/web2c/native/config.h new file mode 100644 index 00000000000..c9b4d5dbc4d --- /dev/null +++ b/Build/source/texk/web2c/web2c/native/config.h @@ -0,0 +1,119 @@ +/* config.h: All .c files include this first. + +Copyright (C) 1995, 1996, 2006, 2007 Karl Berry. + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2, or (at your option) +any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, see <http://www.gnu.org/licenses/. */ + +#ifndef WEB2C_CONFIG_H +#define WEB2C_CONFIG_H + +#if defined (TEX_DLL) && (defined (WIN32) || defined (__CYGWIN__)) +#ifdef MAKE_TEX_DLL +#define TEXDLL __declspec (dllexport) +#else /* ! MAKE_TEX_DLL */ +#define TEXDLL __declspec (dllimport) +#endif +#else /* ! (TEX_DLL && (WIN32 || __CYGWIN__)) */ +#define TEXDLL +#endif + +/* The stuff from the path searching library. */ +#include <kpathsea/config.h> +#include <kpathsea/c-auto.h> +#include <kpathsea/c-vararg.h> + +/* How to open a binary file. */ +#include <kpathsea/c-fopen.h> + +/* The smallest signed type: use `signed char' if ANSI C, `short' if + char is unsigned, otherwise `char'. */ +#ifndef SCHAR_TYPE +#if __STDC__ +#define SCHAR_TYPE signed char +#else /* not __STDC */ +#ifdef __CHAR_UNSIGNED__ +#define SCHAR_TYPE short +#else +#define SCHAR_TYPE char +#endif +#endif /* not __STDC__ */ +#endif /* not SCHAR_TYPE */ +typedef SCHAR_TYPE schar; + +/* The type `integer' must be a signed integer capable of holding at + least the range of numbers (-2^31)..(2^31-1). If your compiler goes + to great lengths to make programs fail, you might have to change this + definition. If this changes, you may have to modify + web2c/fixwrites.c, since it generates code to do integer output using + "%ld", and casts all integral values to be printed to `long'. + + If you define your own INTEGER_TYPE, you have to define your own + INTEGER_MAX and INTEGER_MIN, too. */ +#ifndef INTEGER_TYPE + +#if SIZEOF_LONG > 4 && !defined (NO_DUMP_SHARE) +/* If we have 64-bit longs and want to share format files (with 32-bit + machines), use `int'. */ +#define INTEGER_IS_INT +#endif + +#ifdef INTEGER_IS_INT +#define INTEGER_TYPE int +#define INTEGER_MAX INT_MAX +#define INTEGER_MIN INT_MIN +#else +#define INTEGER_TYPE long +#define INTEGER_MAX LONG_MAX +#define INTEGER_MIN LONG_MIN +#endif /* not INTEGER_IS_INT */ + +#endif /* not INTEGER_TYPE */ + +typedef INTEGER_TYPE integer; + +/* We need a type that's at least off_t wide */ +typedef off_t longinteger; + + +/* I don't want to write a configure test for remove when all Unix + machines have unlink. But, for the sake of non-Unix machines that + support ANSI C... */ +#if !defined (unix) && !defined (__unix__) && defined (__STDC__) && !defined (unlink) +#define unlink remove +#endif + +/* Window support on the Amiga is just for the Amiga. */ +#ifdef AMIGA +#define AMIGAWIN +#endif + +/* Window support for WIN32 machines. */ +#ifdef WIN32 +#define WIN32WIN +#endif + +/* strtol.c */ +#ifndef HAVE_STRTOL +extern long strtol P3H(const char *, char **, int); +#endif + +/* From uexit.c. This is here because the lib/ and web2c/ routines + themselves can use it, but they don't need cpascal.h. */ +extern void uexit P1H(int status); + +/* usage.c */ +extern void usage P1H(const_string progname); +extern void usagehelp P2H(const_string *message, const_string bug_email); + +#endif /* not WEB2C_CONFIG_H */ diff --git a/Build/source/texk/web2c/web2c/native/kpathsea/c-auto.in b/Build/source/texk/web2c/web2c/native/kpathsea/c-auto.in new file mode 100644 index 00000000000..85a564101fd --- /dev/null +++ b/Build/source/texk/web2c/web2c/native/kpathsea/c-auto.in @@ -0,0 +1,181 @@ +/* native/kpathsea/c-auto.in. Generated from configure.ac by autoheader. */ + +/* Define to 1 if the `closedir' function returns void instead of `int'. */ +#undef CLOSEDIR_VOID + +/* Define to 1 if you have the <assert.h> header file. */ +#undef HAVE_ASSERT_H + +/* Define to 1 if you have the `bcmp' function. */ +#undef HAVE_BCMP + +/* Define to 1 if you have the `bcopy' function. */ +#undef HAVE_BCOPY + +/* Define to 1 if you have the `bzero' function. */ +#undef HAVE_BZERO + +/* Define to 1 if you have the <dirent.h> header file, and it defines `DIR'. + */ +#undef HAVE_DIRENT_H + +/* Define to 1 if you have the <dlfcn.h> header file. */ +#undef HAVE_DLFCN_H + +/* Define to 1 if you have the <errno.h> header file. */ +#undef HAVE_ERRNO_H + +/* Define to 1 if you have the <float.h> header file. */ +#undef HAVE_FLOAT_H + +/* Define to 1 if fseeko (and presumably ftello) exists and is declared. */ +#undef HAVE_FSEEKO + +/* Define to 1 if you have the `getcwd' function. */ +#undef HAVE_GETCWD + +/* Define to 1 if you have the `getwd' function. */ +#undef HAVE_GETWD + +/* Define to 1 if you have the `index' function. */ +#undef HAVE_INDEX + +/* Define to 1 if you have the <inttypes.h> header file. */ +#undef HAVE_INTTYPES_H + +/* Define to 1 if you have the <limits.h> header file. */ +#undef HAVE_LIMITS_H + +/* Define to 1 if you have the `memcmp' function. */ +#undef HAVE_MEMCMP + +/* Define to 1 if you have the `memcpy' function. */ +#undef HAVE_MEMCPY + +/* Define to 1 if you have the <memory.h> header file. */ +#undef HAVE_MEMORY_H + +/* Define to 1 if you have the <ndir.h> header file, and it defines `DIR'. */ +#undef HAVE_NDIR_H + +/* Define to 1 if you are using GNU libc or otherwise have global variables + `program_invocation_name' and `program_invocation_short_name'. */ +#undef HAVE_PROGRAM_INVOCATION_NAME + +/* Define to 1 if your compiler understands prototypes. */ +#undef HAVE_PROTOTYPES + +/* Define to 1 if you have the `putenv' function. */ +#undef HAVE_PUTENV + +/* Define to 1 if you have the <pwd.h> header file. */ +#undef HAVE_PWD_H + +/* Define to 1 if you have the `rindex' function. */ +#undef HAVE_RINDEX + +/* Define to 1 if you have the <stdint.h> header file. */ +#undef HAVE_STDINT_H + +/* Define to 1 if you have the <stdlib.h> header file. */ +#undef HAVE_STDLIB_H + +/* Define to 1 if you have the `strcasecmp' function. */ +#undef HAVE_STRCASECMP + +/* Define to 1 if you have the `strchr' function. */ +#undef HAVE_STRCHR + +/* Define to 1 if you have the `strerror' function. */ +#undef HAVE_STRERROR + +/* Define to 1 if you have the <strings.h> header file. */ +#undef HAVE_STRINGS_H + +/* Define to 1 if you have the <string.h> header file. */ +#undef HAVE_STRING_H + +/* Define to 1 if you have the `strrchr' function. */ +#undef HAVE_STRRCHR + +/* Define to 1 if you have the `strstr' function. */ +#undef HAVE_STRSTR + +/* Define to 1 if you have the `strtol' function. */ +#undef HAVE_STRTOL + +/* Define to 1 if `st_mtim' is member of `struct stat'. */ +#undef HAVE_STRUCT_STAT_ST_MTIM + +/* Define to 1 if you have the <sys/dir.h> header file, and it defines `DIR'. + */ +#undef HAVE_SYS_DIR_H + +/* Define to 1 if you have the <sys/ndir.h> header file, and it defines `DIR'. + */ +#undef HAVE_SYS_NDIR_H + +/* Define to 1 if you have the <sys/param.h> header file. */ +#undef HAVE_SYS_PARAM_H + +/* Define to 1 if you have the <sys/stat.h> header file. */ +#undef HAVE_SYS_STAT_H + +/* Define to 1 if you have the <sys/types.h> header file. */ +#undef HAVE_SYS_TYPES_H + +/* Define to 1 if you have the <unistd.h> header file. */ +#undef HAVE_UNISTD_H + +/* Define to the sub-directory in which libtool stores uninstalled libraries. + */ +#undef LT_OBJDIR + +/* Name of package */ +#undef PACKAGE + +/* Define to the address where bug reports for this package should be sent. */ +#undef PACKAGE_BUGREPORT + +/* Define to the full name of this package. */ +#undef PACKAGE_NAME + +/* Define to the full name and version of this package. */ +#undef PACKAGE_STRING + +/* Define to the one symbol short name of this package. */ +#undef PACKAGE_TARNAME + +/* Define to the version of this package. */ +#undef PACKAGE_VERSION + +/* The size of `int', as computed by sizeof. */ +#undef SIZEOF_INT + +/* Define to 1 if you have the ANSI C header files. */ +#undef STDC_HEADERS + +/* Version number of package */ +#undef VERSION + +/* Define to 1 if `lex' declares `yytext' as a `char *' by default, not a + `char[]'. */ +#undef YYTEXT_POINTER + +/* Number of bits in a file offset, on hosts where this is settable. */ +#undef _FILE_OFFSET_BITS + +/* Define to 1 to make fseeko visible on some hosts (e.g. glibc 2.2). */ +#undef _LARGEFILE_SOURCE + +/* Define for large files, on AIX-style hosts. */ +#undef _LARGE_FILES + +/* Define to empty if `const' does not conform to ANSI C. */ +#undef const + +/* Define to `__inline__' or `__inline' if that's what the C compiler + calls it, or to nothing if 'inline' is not supported under any name. */ +#ifndef __cplusplus +#undef inline +#endif diff --git a/Build/source/texk/web2c/xetexdir/am/xetex.am b/Build/source/texk/web2c/xetexdir/am/xetex.am new file mode 100644 index 00000000000..62aff84e37c --- /dev/null +++ b/Build/source/texk/web2c/xetexdir/am/xetex.am @@ -0,0 +1,71 @@ +## texk/web2c/xetexdir/am/xetex.am: Makefile fragment for XeTeX. + +## XeTeX +## +EXTRA_DIST += \ + xetexdir/FontTableCache.cpp \ + xetexdir/FontTableCache.h \ + xetexdir/MathTable.h \ + xetexdir/XeTeXFontInst.cpp \ + xetexdir/XeTeXFontInst.h \ + xetexdir/XeTeXFontInst_FT2.cpp \ + xetexdir/XeTeXFontInst_FT2.h \ + xetexdir/XeTeXFontInst_Mac.cpp \ + xetexdir/XeTeXFontInst_Mac.h \ + xetexdir/XeTeXFontMgr.cpp \ + xetexdir/XeTeXFontMgr.h \ + xetexdir/XeTeXFontMgr_FC.cpp \ + xetexdir/XeTeXFontMgr_FC.h \ + xetexdir/XeTeXFontMgr_Mac.h \ + xetexdir/XeTeXFontMgr_Mac.mm \ + xetexdir/XeTeXGrLayout.cpp \ + xetexdir/XeTeXGrLayout.h \ + xetexdir/XeTeXLayoutInterface.cpp \ + xetexdir/XeTeXLayoutInterface.h \ + xetexdir/XeTeXOTLayoutEngine.cpp \ + xetexdir/XeTeXOTLayoutEngine.h \ + xetexdir/XeTeXOTMath.cpp \ + xetexdir/XeTeXOTMath.h \ + xetexdir/XeTeX_ext.c \ + xetexdir/XeTeX_ext.h \ + xetexdir/XeTeX_mac.c \ + xetexdir/XeTeX_pic.c \ + xetexdir/XeTeXswap.h \ + xetexdir/appleGlyphNames.c \ + xetexdir/bmpimage.c \ + xetexdir/bmpimage.h \ + xetexdir/cmaps.cpp \ + xetexdir/cmaps.h \ + xetexdir/jpegimage.c \ + xetexdir/jpegimage.h \ + xetexdir/mfileio.c \ + xetexdir/mfileio.h \ + xetexdir/numbers.c \ + xetexdir/numbers.h \ + xetexdir/pdfimage.cpp \ + xetexdir/pdfimage.h \ + xetexdir/pngimage.c \ + xetexdir/pngimage.h \ + xetexdir/pool2c.pl \ + xetexdir/sfnt.h \ + xetexdir/trans.c \ + xetexdir/trans.h \ + xetexdir/unicode-char-prep.pl \ + xetexdir/xetex.ch \ + xetexdir/xetex.defines \ + xetexdir/xetex.h \ + xetexdir/xetexextra.in + +## Not used +## +EXTRA_DIST += \ + xetexdir/LICENSE.txt + +## Eventually delete these files +## +EXTRA_DIST += \ + xetexdir/acx_pthread.m4 \ + xetexdir/tests.ac \ + xetexdir/withenable.ac \ + xetexdir/xetex.mk + diff --git a/Build/source/texk/xdv2pdf/Makefile.in.orig b/Build/source/texk/xdv2pdf/Makefile.in.orig new file mode 100644 index 00000000000..1b1183e6562 --- /dev/null +++ b/Build/source/texk/xdv2pdf/Makefile.in.orig @@ -0,0 +1,80 @@ +# @configure_input@ + +kpse_include ../make/paths.mk +kpse_include ../make/common.mk +kpse_include ../make/programs.mk + +CXX = c++ +OBJC = cc +CXXLD = $(CXX) +cxx_link_command = $(CXXLD) -o $@ $(LDFLAGS) +kpathsea_cxx_link = $(LIBTOOL) --mode=link $(cxx_link_command) + +ALL_CXXFLAGS = @CXXFLAGS@ @DEFS@ $(XXCFLAGS) -I. -I$(srcdir) +ALL_OBJCFLAGS = @DEFS@ $(XXOBJCFLAGS) -I. -I$(srcdir) + +.SUFFIXES: .cpp .o .m +.cpp.o: + $(CXX) $(ALL_CXXFLAGS) -c $< +.m.o: + $(OBJC) $(ALL_OBJCFLAGS) -c $< + +FRAMEWORKS = \ + -framework Carbon \ + -framework QuickTime + +FRAMEWORKS_t1w = -framework Cocoa +LIBS_t1w = # -lm + +program = xdv2pdf +t1wrap = T1Wrap +programs = $(program) $(t1wrap) +default all: $(programs) + +objects=xdv2pdf_main.o xdv2pdf.o xdv2pdf_specials.o + +objects_t1w=T1Wrap.o SimplePSInterpreter.o + +$(objects): Makefile +$(objects_t1m): Makefile + +$(program): $(objects) $(kpathsea) $(ALL_LIBS_DEP) + $(kpathsea_cxx_link) $(objects) $(FRAMEWORKS) $(LOADLIBES) + +$(t1wrap): $(objects_t1w) + $(kpathsea_cxx_link) $(objects_t1w) $(FRAMEWORKS_t1w) $(LOADLIBES) + +T1Wrap.o: $(srcdir)/T1Wrap.m + $(OBJC) $(ALL_OBJCFLAGS) -c $< + +SimplePSInterpreter.o: $(srcdir)/SimplePSInterpreter.m + $(OBJC) $(ALL_OBJCFLAGS) -c $< + +kpse_include ../make/tkpathsea.mk + +install: install-exec install-data +uninstall: uninstall-exec uninstall-data + +distclean:: + $(RM) c-auto.h + +install-exec: + $(SHELL) $(top_srcdir)/../mkinstalldirs $(bindir) + $(INSTALL_LIBTOOL_PROG) $(program) $(bindir) + $(INSTALL) $(t1wrap) $(bindir) + +uninstall-exec: + cd $(bindir); rm -f $(programs) + +install-data: + $(SHELL) $(top_srcdir)/../mkinstalldirs $(man1dir) + +uninstall-data: + +kpse_include ../make/config.mk + +info dvi check: + +kpse_include ../make/clean.mk +kpse_include ../make/rdepend.mk +kpse_include depend.mk diff --git a/Build/source/texk/xdv2pdf/ac/withenable.ac b/Build/source/texk/xdv2pdf/ac/withenable.ac new file mode 100644 index 00000000000..5cf14d7e517 --- /dev/null +++ b/Build/source/texk/xdv2pdf/ac/withenable.ac @@ -0,0 +1,3 @@ +## texk/xdv2pdf/ac/withenable.ac +## configure options and TL libraries required for xdv2pdf +KPSE_WITH_PROG([xdv2pdf], [kpathsea]) diff --git a/Build/source/texk/xdv2pdf/configure.in.orig b/Build/source/texk/xdv2pdf/configure.in.orig new file mode 100644 index 00000000000..5e89a2cd668 --- /dev/null +++ b/Build/source/texk/xdv2pdf/configure.in.orig @@ -0,0 +1,66 @@ +dnl Process this file with autoconf to produce a configure script. +AC_INIT(xdv2pdf.cpp) + +define([_version_],"0.998") + +VERSION=_version_ +AC_SUBST(VERSION) +AC_DEFINE(VERSION, _version_, [package version]) +AC_DEFINE(PACKAGE, "xdv2pdf", [package name]) + +AC_CONFIG_HEADERS([c-auto.h:c-auto.in], [date >stamp-auto]) + +dnl Disable maintainer portions of included makefile fragments +MAINT='#' +AC_SUBST(MAINT) + +dnl First, check if we're configuring on Mac OS X -- can't build elsewhere + +sinclude(../web2c/xetexdir/tests.ac) + +AC_HAS_CARBON +if test "x$has_carbon" = xno; then + with_xdv2pdf=no + exit +fi + +AC_HAS_QUICKTIME +if test "x$has_quicktime" = xno; then + with_xdv2pdf=no + exit +fi + +dnl Checks for programs. +AC_PROG_CC +AC_PROG_CXX +AC_PROG_CPP +AC_PROG_INSTALL +AC_PROG_LN_S +AC_PROG_MAKE_SET + +AC_DEFINE([KPATHSEA], 1, [define if you have kpathsea]) +AC_DEFINE([HAVE_KPATHSEA], 1, [define if you have kpathsea]) +AC_DEFINE([HAVE_KPSE_FORMATS], 1, [define if kpathsea supports type1 and vf formats]) + +TTF_OPT='' +AC_SUBST(TTF_OPT) + +dnl Checks for header files. +AC_HEADER_STDC +AC_CHECK_HEADERS(unistd.h) + +dnl Checks for typedefs, structures, and compiler characteristics. +AC_C_CONST +AC_TYPE_SIZE_T +AC_STRUCT_TM + +AC_C_BIGENDIAN + +dnl Checks for library functions. +AC_FUNC_MEMCMP +AC_CHECK_FUNCS(strspn system) +AC_CHECK_LIB(m, main) + +KPSE_CONFIG_FILES([Makefile]) + +AC_OUTPUT diff --git a/Build/source/texk/xdvipdfmx/Makefile.in.orig b/Build/source/texk/xdvipdfmx/Makefile.in.orig new file mode 100644 index 00000000000..5c9d9716c63 --- /dev/null +++ b/Build/source/texk/xdvipdfmx/Makefile.in.orig @@ -0,0 +1,660 @@ +# Makefile.in generated by automake 1.10.1 from Makefile.am. +# @configure_input@ + +# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, +# 2003, 2004, 2005, 2006, 2007, 2008 Free Software Foundation, Inc. +# This Makefile.in is free software; the Free Software Foundation +# gives unlimited permission to copy and/or distribute it, +# with or without modifications, as long as this notice is preserved. + +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY, to the extent permitted by law; without +# even the implied warranty of MERCHANTABILITY or FITNESS FOR A +# PARTICULAR PURPOSE. + +@SET_MAKE@ + +# SUBDIRS = data src +VPATH = @srcdir@ +pkgdatadir = $(datadir)/@PACKAGE@ +pkglibdir = $(libdir)/@PACKAGE@ +pkgincludedir = $(includedir)/@PACKAGE@ +am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd +install_sh_DATA = $(install_sh) -c -m 644 +install_sh_PROGRAM = $(install_sh) -c +install_sh_SCRIPT = $(install_sh) -c +INSTALL_HEADER = $(INSTALL_DATA) +transform = $(program_transform_name) +NORMAL_INSTALL = : +PRE_INSTALL = : +POST_INSTALL = : +NORMAL_UNINSTALL = : +PRE_UNINSTALL = : +POST_UNINSTALL = : +build_triplet = @build@ +host_triplet = @host@ +subdir = . +DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ + $(srcdir)/Makefile.in $(srcdir)/config.h.in \ + $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \ + TODO compile config.guess config.sub depcomp install-sh \ + ltmain.sh missing mkinstalldirs +ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +am__aclocal_m4_deps = $(top_srcdir)/m4/cho-kpse.m4 \ + $(top_srcdir)/m4/cho-libs.m4 $(top_srcdir)/m4/jfk-macos.m4 \ + $(top_srcdir)/m4/maw-time.m4 \ + $(top_srcdir)/../../libs/zlib/withenable.ac \ + $(top_srcdir)/../../libs/zlib/zlib.ac \ + $(top_srcdir)/../../libs/libpng/withenable.ac \ + $(top_srcdir)/../../libs/libpng/libpng.ac \ + $(top_srcdir)/../../libs/freetype2/withenable.ac \ + $(top_srcdir)/../../libs/freetype2/freetype2.ac \ + $(top_srcdir)/configure.in +am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ + $(ACLOCAL_M4) +am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ + configure.lineno config.status.lineno +mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +CONFIG_HEADER = config.h +CONFIG_CLEAN_FILES = +SOURCES = +DIST_SOURCES = +RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ + html-recursive info-recursive install-data-recursive \ + install-dvi-recursive install-exec-recursive \ + install-html-recursive install-info-recursive \ + install-pdf-recursive install-ps-recursive install-recursive \ + installcheck-recursive installdirs-recursive pdf-recursive \ + ps-recursive uninstall-recursive +RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \ + distclean-recursive maintainer-clean-recursive +ETAGS = etags +CTAGS = ctags +DIST_SUBDIRS = $(SUBDIRS) +DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) +distdir = $(PACKAGE)-$(VERSION) +top_distdir = $(distdir) +am__remove_distdir = \ + { test ! -d $(distdir) \ + || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ + && rm -fr $(distdir); }; } +DIST_ARCHIVES = $(distdir).tar.gz +GZIP_ENV = --best +distuninstallcheck_listfiles = find . -type f -print +distcleancheck_listfiles = find . -type f -print +ACLOCAL = @ACLOCAL@ +AMTAR = @AMTAR@ +AR = @AR@ +AUTOCONF = @AUTOCONF@ +AUTOHEADER = @AUTOHEADER@ +AUTOMAKE = @AUTOMAKE@ +AWK = @AWK@ +CC = @CC@ +CCDEPMODE = @CCDEPMODE@ +CFLAGS = @CFLAGS@ +CPP = @CPP@ +CPPFLAGS = @CPPFLAGS@ +CXX = @CXX@ +CXXCPP = @CXXCPP@ +CXXDEPMODE = @CXXDEPMODE@ +CXXFLAGS = @CXXFLAGS@ +CYGPATH_W = @CYGPATH_W@ +DEFS = @DEFS@ +DEPDIR = @DEPDIR@ +DSYMUTIL = @DSYMUTIL@ +ECHO = @ECHO@ +ECHO_C = @ECHO_C@ +ECHO_N = @ECHO_N@ +ECHO_T = @ECHO_T@ +EGREP = @EGREP@ +EXEEXT = @EXEEXT@ +F77 = @F77@ +FFLAGS = @FFLAGS@ +FREETYPE2CPPFLAGS = @FREETYPE2CPPFLAGS@ +FREETYPE2DEP = @FREETYPE2DEP@ +GREP = @GREP@ +INSTALL = @INSTALL@ +INSTALL_DATA = @INSTALL_DATA@ +INSTALL_PROGRAM = @INSTALL_PROGRAM@ +INSTALL_SCRIPT = @INSTALL_SCRIPT@ +INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ +LDFLAGS = @LDFLAGS@ +LDFREETYPE2 = @LDFREETYPE2@ +LDLIBPNG = @LDLIBPNG@ +LDZLIB = @LDZLIB@ +LIBOBJS = @LIBOBJS@ +LIBPNGCPPFLAGS = @LIBPNGCPPFLAGS@ +LIBPNGDEP = @LIBPNGDEP@ +LIBS = @LIBS@ +LIBTOOL = @LIBTOOL@ +LN_S = @LN_S@ +LTLIBOBJS = @LTLIBOBJS@ +MAINT = @MAINT@ +MAKEINFO = @MAKEINFO@ +MKDIR_P = @MKDIR_P@ +NMEDIT = @NMEDIT@ +OBJEXT = @OBJEXT@ +PACKAGE = @PACKAGE@ +PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ +PACKAGE_NAME = @PACKAGE_NAME@ +PACKAGE_STRING = @PACKAGE_STRING@ +PACKAGE_TARNAME = @PACKAGE_TARNAME@ +PACKAGE_VERSION = @PACKAGE_VERSION@ +PATH_SEPARATOR = @PATH_SEPARATOR@ +RANLIB = @RANLIB@ +SED = @SED@ +SET_MAKE = @SET_MAKE@ +SHELL = @SHELL@ +STRIP = @STRIP@ +VERSION = @VERSION@ +ZLIBCPPFLAGS = @ZLIBCPPFLAGS@ +ZLIBDEP = @ZLIBDEP@ +abs_builddir = @abs_builddir@ +abs_srcdir = @abs_srcdir@ +abs_top_builddir = @abs_top_builddir@ +abs_top_srcdir = @abs_top_srcdir@ +ac_ct_CC = @ac_ct_CC@ +ac_ct_CXX = @ac_ct_CXX@ +ac_ct_F77 = @ac_ct_F77@ +am__include = @am__include@ +am__leading_dot = @am__leading_dot@ +am__quote = @am__quote@ +am__tar = @am__tar@ +am__untar = @am__untar@ +bindir = @bindir@ +build = @build@ +build_alias = @build_alias@ +build_cpu = @build_cpu@ +build_os = @build_os@ +build_vendor = @build_vendor@ +builddir = @builddir@ +datadir = @datadir@ +datarootdir = @datarootdir@ +docdir = @docdir@ +dvidir = @dvidir@ +dvipdfmx_LDFLAGS = @dvipdfmx_LDFLAGS@ +exec_prefix = @exec_prefix@ +host = @host@ +host_alias = @host_alias@ +host_cpu = @host_cpu@ +host_os = @host_os@ +host_vendor = @host_vendor@ +htmldir = @htmldir@ +includedir = @includedir@ +infodir = @infodir@ +install_sh = @install_sh@ +libdir = @libdir@ +libexecdir = @libexecdir@ +localedir = @localedir@ +localstatedir = @localstatedir@ +mandir = @mandir@ +mkdir_p = @mkdir_p@ +oldincludedir = @oldincludedir@ +pdfdir = @pdfdir@ +prefix = @prefix@ +program_transform_name = @program_transform_name@ +psdir = @psdir@ +sbindir = @sbindir@ +sharedstatedir = @sharedstatedir@ +srcdir = @srcdir@ +sysconfdir = @sysconfdir@ +target_alias = @target_alias@ +top_build_prefix = @top_build_prefix@ +top_builddir = @top_builddir@ +top_srcdir = @top_srcdir@ +xdvipdfmx_LDFLAGS = @xdvipdfmx_LDFLAGS@ + +# skip the data subdir; we rely on dvipdfmx to provide those files +SUBDIRS = src +ACLOCAL_AMFLAGS = -I m4 +all: config.h + $(MAKE) $(AM_MAKEFLAGS) all-recursive + +.SUFFIXES: +am--refresh: + @: +$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(am__configure_deps) + @for dep in $?; do \ + case '$(am__configure_deps)' in \ + *$$dep*) \ + echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ + cd $(srcdir) && $(AUTOMAKE) --gnu \ + && exit 0; \ + exit 1;; \ + esac; \ + done; \ + echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ + cd $(top_srcdir) && \ + $(AUTOMAKE) --gnu Makefile +.PRECIOUS: Makefile +Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status + @case '$?' in \ + *config.status*) \ + echo ' $(SHELL) ./config.status'; \ + $(SHELL) ./config.status;; \ + *) \ + echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ + cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ + esac; + +$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck + +$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(srcdir) && $(AUTOCONF) +$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps) + cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) + +config.h: stamp-h1 + @if test ! -f $@; then \ + rm -f stamp-h1; \ + $(MAKE) $(AM_MAKEFLAGS) stamp-h1; \ + else :; fi + +stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status + @rm -f stamp-h1 + cd $(top_builddir) && $(SHELL) ./config.status config.h +$(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) + cd $(top_srcdir) && $(AUTOHEADER) + rm -f stamp-h1 + touch $@ + +distclean-hdr: + -rm -f config.h stamp-h1 + +mostlyclean-libtool: + -rm -f *.lo + +clean-libtool: + -rm -rf .libs _libs + +distclean-libtool: + -rm -f libtool + +# This directory's subdirectories are mostly independent; you can cd +# into them and run `make' without going through this Makefile. +# To change the values of `make' variables: instead of editing Makefiles, +# (1) if the variable is set in `config.status', edit `config.status' +# (which will cause the Makefiles to be regenerated when you run `make'); +# (2) otherwise, pass the desired values on the `make' command line. +$(RECURSIVE_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + dot_seen=yes; \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ + fi; test -z "$$fail" + +$(RECURSIVE_CLEAN_TARGETS): + @failcom='exit 1'; \ + for f in x $$MAKEFLAGS; do \ + case $$f in \ + *=* | --[!k]*);; \ + *k*) failcom='fail=yes';; \ + esac; \ + done; \ + dot_seen=no; \ + case "$@" in \ + distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ + *) list='$(SUBDIRS)' ;; \ + esac; \ + rev=''; for subdir in $$list; do \ + if test "$$subdir" = "."; then :; else \ + rev="$$subdir $$rev"; \ + fi; \ + done; \ + rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ + if test "$$subdir" = "."; then \ + local_target="$$target-am"; \ + else \ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ + || eval $$failcom; \ + done && test -z "$$fail" +tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done +ctags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ + done + +ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) + list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonemtpy = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + mkid -fID $$unique +tags: TAGS + +TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ + if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ + include_option=--etags-include; \ + empty_fix=.; \ + else \ + include_option=--include; \ + empty_fix=; \ + fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test ! -f $$subdir/TAGS || \ + tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ + fi; \ + done; \ + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ + test -n "$$unique" || unique=$$empty_fix; \ + $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ + $$tags $$unique; \ + fi +ctags: CTAGS +CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ + $(TAGS_FILES) $(LISP) + tags=; \ + list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ + unique=`for i in $$list; do \ + if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ + done | \ + $(AWK) '{ files[$$0] = 1; nonempty = 1; } \ + END { if (nonempty) { for (i in files) print i; }; }'`; \ + test -z "$(CTAGS_ARGS)$$tags$$unique" \ + || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ + $$tags $$unique + +GTAGS: + here=`$(am__cd) $(top_builddir) && pwd` \ + && cd $(top_srcdir) \ + && gtags -i $(GTAGS_ARGS) $$here + +distclean-tags: + -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +distdir: $(DISTFILES) + $(am__remove_distdir) + test -d $(distdir) || mkdir $(distdir) + @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \ + list='$(DISTFILES)'; \ + dist_files=`for file in $$list; do echo $$file; done | \ + sed -e "s|^$$srcdirstrip/||;t" \ + -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \ + case $$dist_files in \ + */*) $(MKDIR_P) `echo "$$dist_files" | \ + sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \ + sort -u` ;; \ + esac; \ + for file in $$dist_files; do \ + if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ + if test -d $$d/$$file; then \ + dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \ + if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ + cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ + fi; \ + cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ + || cp -p $$d/$$file $(distdir)/$$file \ + || exit 1; \ + fi; \ + done + list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ + test -d "$(distdir)/$$subdir" \ + || $(MKDIR_P) "$(distdir)/$$subdir" \ + || exit 1; \ + distdir=`$(am__cd) $(distdir) && pwd`; \ + top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ + (cd $$subdir && \ + $(MAKE) $(AM_MAKEFLAGS) \ + top_distdir="$$top_distdir" \ + distdir="$$distdir/$$subdir" \ + am__remove_distdir=: \ + am__skip_length_check=: \ + distdir) \ + || exit 1; \ + fi; \ + done + -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ + ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ + ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \ + || chmod -R a+r $(distdir) +dist-gzip: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + +dist-bzip2: distdir + tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 + $(am__remove_distdir) + +dist-lzma: distdir + tardir=$(distdir) && $(am__tar) | lzma -9 -c >$(distdir).tar.lzma + $(am__remove_distdir) + +dist-tarZ: distdir + tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z + $(am__remove_distdir) + +dist-shar: distdir + shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz + $(am__remove_distdir) + +dist-zip: distdir + -rm -f $(distdir).zip + zip -rq $(distdir).zip $(distdir) + $(am__remove_distdir) + +dist dist-all: distdir + tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz + $(am__remove_distdir) + +# This target untars the dist file and tries a VPATH configuration. Then +# it guarantees that the distribution is self-contained by making another +# tarfile. +distcheck: dist + case '$(DIST_ARCHIVES)' in \ + *.tar.gz*) \ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ + *.tar.bz2*) \ + bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ + *.tar.lzma*) \ + unlzma -c $(distdir).tar.lzma | $(am__untar) ;;\ + *.tar.Z*) \ + uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ + *.shar.gz*) \ + GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ + *.zip*) \ + unzip $(distdir).zip ;;\ + esac + chmod -R a-w $(distdir); chmod a+w $(distdir) + mkdir $(distdir)/_build + mkdir $(distdir)/_inst + chmod a-w $(distdir) + dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ + && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ + && cd $(distdir)/_build \ + && ../configure --srcdir=.. --prefix="$$dc_install_base" \ + $(DISTCHECK_CONFIGURE_FLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) \ + && $(MAKE) $(AM_MAKEFLAGS) dvi \ + && $(MAKE) $(AM_MAKEFLAGS) check \ + && $(MAKE) $(AM_MAKEFLAGS) install \ + && $(MAKE) $(AM_MAKEFLAGS) installcheck \ + && $(MAKE) $(AM_MAKEFLAGS) uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ + distuninstallcheck \ + && chmod -R a-w "$$dc_install_base" \ + && ({ \ + (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ + && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ + distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ + } || { rm -rf "$$dc_destdir"; exit 1; }) \ + && rm -rf "$$dc_destdir" \ + && $(MAKE) $(AM_MAKEFLAGS) dist \ + && rm -rf $(DIST_ARCHIVES) \ + && $(MAKE) $(AM_MAKEFLAGS) distcleancheck + $(am__remove_distdir) + @(echo "$(distdir) archives ready for distribution: "; \ + list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ + sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x' +distuninstallcheck: + @cd $(distuninstallcheck_dir) \ + && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ + || { echo "ERROR: files left after uninstall:" ; \ + if test -n "$(DESTDIR)"; then \ + echo " (check DESTDIR support)"; \ + fi ; \ + $(distuninstallcheck_listfiles) ; \ + exit 1; } >&2 +distcleancheck: distclean + @if test '$(srcdir)' = . ; then \ + echo "ERROR: distcleancheck can only run from a VPATH build" ; \ + exit 1 ; \ + fi + @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ + || { echo "ERROR: files left in build directory after distclean:" ; \ + $(distcleancheck_listfiles) ; \ + exit 1; } >&2 +check-am: all-am +check: check-recursive +all-am: Makefile config.h +installdirs: installdirs-recursive +installdirs-am: +install: install-recursive +install-exec: install-exec-recursive +install-data: install-data-recursive +uninstall: uninstall-recursive + +install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am + +installcheck: installcheck-recursive +install-strip: + $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ + install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ + `test -z '$(STRIP)' || \ + echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install +mostlyclean-generic: + +clean-generic: + +distclean-generic: + -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + +maintainer-clean-generic: + @echo "This command is intended for maintainers to use" + @echo "it deletes files that may require special tools to rebuild." +clean: clean-recursive + +clean-am: clean-generic clean-libtool mostlyclean-am + +distclean: distclean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -f Makefile +distclean-am: clean-am distclean-generic distclean-hdr \ + distclean-libtool distclean-tags + +dvi: dvi-recursive + +dvi-am: + +html: html-recursive + +info: info-recursive + +info-am: + +install-data-am: + +install-dvi: install-dvi-recursive + +install-exec-am: + +install-html: install-html-recursive + +install-info: install-info-recursive + +install-man: + +install-pdf: install-pdf-recursive + +install-ps: install-ps-recursive + +installcheck-am: + +maintainer-clean: maintainer-clean-recursive + -rm -f $(am__CONFIG_DISTCLEAN_FILES) + -rm -rf $(top_srcdir)/autom4te.cache + -rm -f Makefile +maintainer-clean-am: distclean-am maintainer-clean-generic + +mostlyclean: mostlyclean-recursive + +mostlyclean-am: mostlyclean-generic mostlyclean-libtool + +pdf: pdf-recursive + +pdf-am: + +ps: ps-recursive + +ps-am: + +uninstall-am: + +.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) install-am \ + install-strip + +.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \ + all all-am am--refresh check check-am clean clean-generic \ + clean-libtool ctags ctags-recursive dist dist-all dist-bzip2 \ + dist-gzip dist-lzma dist-shar dist-tarZ dist-zip distcheck \ + distclean distclean-generic distclean-hdr distclean-libtool \ + distclean-tags distcleancheck distdir distuninstallcheck dvi \ + dvi-am html html-am info info-am install install-am \ + install-data install-data-am install-dvi install-dvi-am \ + install-exec install-exec-am install-html install-html-am \ + install-info install-info-am install-man install-pdf \ + install-pdf-am install-ps install-ps-am install-strip \ + installcheck installcheck-am installdirs installdirs-am \ + maintainer-clean maintainer-clean-generic mostlyclean \ + mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ + tags tags-recursive uninstall uninstall-am + +# Tell versions [3.59,3.63) of GNU make to not export all variables. +# Otherwise a system limit (for SysV at least) may be exceeded. +.NOEXPORT: diff --git a/Build/source/texk/xdvipdfmx/ac/withenable.ac b/Build/source/texk/xdvipdfmx/ac/withenable.ac new file mode 100644 index 00000000000..f7c6cb26807 --- /dev/null +++ b/Build/source/texk/xdvipdfmx/ac/withenable.ac @@ -0,0 +1,3 @@ +## texk/xdvipdfmx/ac/withenable.ac +## configure options and TL libraries required for xdvipdfmx +KPSE_WITH_PROG([xdvipdfmx], [kpathsea freetype2 libpng]) diff --git a/Build/source/texk/xdvipdfmx/configure.in.orig b/Build/source/texk/xdvipdfmx/configure.in.orig new file mode 100644 index 00000000000..0f9f4a615bb --- /dev/null +++ b/Build/source/texk/xdvipdfmx/configure.in.orig @@ -0,0 +1,181 @@ +dnl Process this file with autoconf to produce a configure script. +AC_INIT(src/dvipdfmx.c) +AM_INIT_AUTOMAKE(xdvipdfmx, 0.7.3) +AM_CONFIG_HEADER(config.h) +AM_MAINTAINER_MODE + +dnl Checks for programs. +AC_PROG_CC +AM_PROG_CC_C_O +AC_PROG_INSTALL +AC_PROG_LN_S +AC_PROG_MAKE_SET +AC_PROG_LIBTOOL + +AC_SYS_LARGEFILE +AC_FUNC_FSEEKO + +# Building inside teTeX or TeX Live? +AC_ARG_ENABLE(tetex-build, [ --enable-tetex-build build as part of a teTeX installation]) + + +dnl Check for kpathsea library. (required) +if test "x$enable_tetex_build" = xyes; then + # In teTeX and TeX Live, LDFLAGS is passed by texk/Makefile and + # reserved for the user. Therefore we need another variable for the + # loader flags to find the local kpathsea. We use xdvipdfmx_LDFLAGS + # since Automake already sets that up in the link command. + xdvipdfmx_LDFLAGS= + AC_SUBST(xdvipdfmx_LDFLAGS) + + if test ! -d $srcdir/../../texk/kpathsea; then + AC_MSG_ERROR([ +========================================= + +You specified --enable-tetex-build, but I can't find the kpathsea +directory. I expected it to be in $srcdir/../../texk/kpathsea. + +=========================================]) + fi + CPPFLAGS="$CPPFLAGS -I\$(top_builddir)/../../texk -I\$(top_srcdir)/../../texk" + xdvipdfmx_LDFLAGS="-L\$(top_builddir)/../../texk/kpathsea/.libs" + + AM_CONDITIONAL(TDS_VERSION_11, true) + AC_DEFINE([__TDS_VERSION__], 0x200406L) +else + dnl Don't bother going further if we don't have kpse installed. + AC_ARG_WITH(kpathsea, + [ --with-kpathsea=DIR use kpathsea include/library files from DIR], [ + if test -d "$withval"; then + CPPFLAGS="$CPPFLAGS -I$withval/include" + LDFLAGS="$LDFLAGS -L$withval/lib" + fi + ], [ + if test -d "$prefix"; then + CPPFLAGS="$CPPFLAGS -I$prefix/include" + LDFLAGS="$LDFLAGS -L$prefix/lib" + else + CPPFLAGS="$CPPFLAGS -I$ac_default_prefix/include" + LDFLAGS="$LDFLAGS -L$ac_default_prefix/lib" + fi + ]) + + AC_CHECK_LIB(kpathsea, kpse_find_file, [LIBS="-lkpathsea $LIBS"], + AC_MSG_ERROR([kpathsea library not found +This version of xdvipdfmx requires the kpathsea library and its headers. If +you know where it is you might try setting the LDFLAGS environment variable +with -L pointing to the directory containing libkpathsea.a. + ]) + ) + + dnl Check kpathsea support for required formats and funcs. + CHO_CHECK_KPSE_SUPPORT([xdvipdfmx]) + + dnl Check for TDS version kpathsea library supports. + CHO_CHECK_KPSE_TDS_VERSION + + dnl Check for libfreetype, required for xdvipdfmx features + CHO_CHECK_LIBFREETYPE([xdvipdfmx]) +fi + +dnl Checks for header files. +AC_HEADER_STDC +AC_CHECK_HEADERS(unistd.h) +AC_CHECK_HEADERS(stdint.h inttypes.h sys/types.h) + +dnl Checks for library functions. +AC_FUNC_MEMCMP +AC_CHECK_FUNCS(open close system getenv mkstemp basename) + +dnl Checks for typedefs, structures, and compiler characteristics. +MAW_EXT_TIMEZONE +MAW_TZ_HAS_TM_GMTOFF + +AC_C_CONST +AC_C_INLINE +AC_TYPE_SIZE_T +AC_STRUCT_TM +AC_STRUCT_TIMEZONE +AC_C_BIGENDIAN + +AC_CHECK_SIZEOF(char) +AC_CHECK_SIZEOF(short) +AC_CHECK_SIZEOF(int) +AC_CHECK_SIZEOF(long) + + +dnl Check for additonal libraries. + +JFK_HAS_APP_SERVICES +if test "x$have_app_services" = xno; then + CHO_HAS_LIBFONTCONFIG +fi + +# check that it's valid to define XETEX and possibly XETEX_MAC +if test "x$have_app_services" = xyes; then + AC_DEFINE([XETEX], [], [Define if part of a teTeX/TeX live build.]) + AC_DEFINE([XETEX_MAC], [], [Define if part of a teTeX/TeX live build for Mac OS X.]) +elif test "x$have_libfontconfig" = xyes; then + AC_DEFINE([XETEX]) +else + AC_MSG_ERROR([fontconfig library or ApplicationServices framework not found. +This version of xdvipdfmx requires either ApplicationServices (on Mac OS X) +or the fontconfig library (on other platforms) to be available, otherwise it +cannot support XeTeX output using standard system-installed fonts. + ]) +fi + +if test "x$enable_tetex_build" = xyes; then + # Get these common libraries from the sources, too. + # Seems like it would be simpler to treat kpathsea this way too, but + # we're just starting from what lcdf-typetools did. + sinclude(../../libs/zlib/withenable.ac) + sinclude(../../libs/zlib/zlib.ac) + + sinclude(../../libs/libpng/withenable.ac) + sinclude(../../libs/libpng/libpng.ac) + + sinclude(../../libs/freetype2/withenable.ac) + sinclude(../../libs/freetype2/freetype2.ac) + + # yes, we have zlib and png. + AC_DEFINE(HAVE_ZLIB) + AC_DEFINE(HAVE_LIBPNG) + AC_DEFINE([HAVE_FREETYPE2], [], [Define if you have freetype2 and its headers]) + + # You must define HAVE_ZLIB_COMPRESS2 to enable '-z' option for controlling + # zlib compression level, but zlib.ac included above does not do this test. + # We assume zlib always has compress2() here although that's not always true. + AC_DEFINE([HAVE_ZLIB_COMPRESS2], 1) + + # tetex/tex live build; this always has kpathsea, xbasename, etc., + # as we're building from current sources. Do this stuff at the end so + # other configure tests don't try to link with kpathsea (which doesn't + # exist at configure time). + LIBS="-lkpathsea -lm $LIBS" + xdvipdfmx_LDFLAGS="$xdvipdfmx_LDFLAGS $FONTCONFIGLDFLAGS" + AC_SUBST(xdvipdfmx_LDFLAGS) + AC_MSG_NOTICE([tetex build enabled, LIBS now: $LIBS]) +else + CHO_HAS_LIBPAPER + CHO_HAS_ZLIB + CHO_HAS_LIBPNG + +dnl these variables are defined in the tetex case and used in src/Makefile.am. +dnl just let them be empty. + AC_SUBST(LIBPNGCPPFLAGS) + AC_SUBST(LDLIBPNG) + AC_SUBST(LIBPNGDEP) + AC_SUBST(ZLIBCPPFLAGS) + AC_SUBST(LDZLIB) + AC_SUBST(ZLIBDEP) + AC_SUBST(FREETYPE2CPPFLAGS) + AC_SUBST(LDFREETYPE2) + AC_SUBST(FREETYPE2DEP) + AC_SUBST(dvipdfmx_LDFLAGS) + AC_SUBST(xdvipdfmx_LDFLAGS) +fi + +AC_CONFIG_FILES([Makefile data/Makefile src/Makefile]) +AC_OUTPUT + |