diff options
Diffstat (limited to 'Build/source/texk/web2c/omegaware/odvicopy.web')
-rw-r--r-- | Build/source/texk/web2c/omegaware/odvicopy.web | 4688 |
1 files changed, 4688 insertions, 0 deletions
diff --git a/Build/source/texk/web2c/omegaware/odvicopy.web b/Build/source/texk/web2c/omegaware/odvicopy.web new file mode 100644 index 00000000000..cda08cc427f --- /dev/null +++ b/Build/source/texk/web2c/omegaware/odvicopy.web @@ -0,0 +1,4688 @@ +% odvicopy.web: Omega version of file dvicopy.web +% +% This file is part of the Omega project, which +% is based in the web2c distribution of TeX. +% +% Copyright (c) 1994--1998 John Plaice and Yannis Haralambous +% applies only to the changes to the original dvicopy.web. +% +% This program is free software; you can redistribute it and/or modify +% it under the terms of the GNU General Public License as published by +% the Free Software Foundation; either version 1, or (at your option) +% any later version. +% +% You should have received a copy of the GNU General Public License +% along with this program; if not, write to the Free Software +% Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +% +% Version 0.9 was finished May 21, 1990. +% Version 1.0 pixel rounding for real devices (August 6, 1990). +% Version 1.1 major rearrangements for DVIprint (October 7, 1990). +% Version 1.2 fixed some bugs, page selection (February 13, 1991). +% Version 1.3 several more changes, command line options, +% don't load fonts that are never used (August 25, 1992). +% Version 1.4 fixed a typo (March 28, 1995). +% Version 1.5 avoided cur_name_length identifier conflict (October 15, 1995). + +% Here is TeX material that gets inserted after \input webmac +\def\hang{\hangindent 3em\indent\ignorespaces} +\font\ninerm=cmr9 +\let\mc=\ninerm % medium caps for names like SAIL +\def\PASCAL{Pascal} +\font\logo=manfnt % font used for the METAFONT logo +\def\MF{{\logo META}\-{\logo FONT}} +\mathchardef\RA="3221 % right arrow + +\def\(#1){} % this is used to make section names sort themselves better +\def\9#1{} % this is used for sort keys in the index + +\def\title{ODVI\lowercase{copy}} % don't change this line! +\def\contentspagenumber{1} +\def\topofcontents{\null + \def\titlepage{F} % include headline on the contents page + \def\rheader{\mainfont\hfil \contentspagenumber} + \vfill + \centerline{\titlefont The {\ttitlefont ODVIcopy} processor} + \vskip 5pt + \centerline{Copyright (C) 1990,95 Peter Breitenlohner, +1994,97 John Plaice and Yannis Haralambous} + \centerline{Distributed under terms of GNU General Public License} + \vskip 15pt + \centerline{(Version 1.5, March 1997)} + \vfill} +\def\botofcontents{\vfill + \centerline{\hsize 5in\baselineskip9pt + \vbox{\ninerm\noindent + This program was developed at the Max-Planck-Institut f\"ur Physik + (Werner-Heisenberg-Institut), Munich, Germany. + And modified at the Universit\'e Laval, Qu\'ebec, Canada. + `\TeX' is a trademark of the American Mathematical Society. + `{\logo hijklmnj}\kern1pt' is a trademark of Addison-Wesley + Publishing Company.}}} +\pageno=\contentspagenumber \advance\pageno by 1 + +@* Introduction. +The \.{ODVIcopy} utility program copies (selected pages of) binary +device-independent (``\.{DVI}'') files that are produced by document +compilers such as \TeX and $\Omega$, +and replaces all references to characters from +virtual fonts by the typesetting instructions specified for them in +binary virtual-font (``\.{VF}'' or ``OVF'') files. +This program has two chief purposes: (1)~It can be used as preprocessor +for existing \.{DVI}-related software in cases where this software is +unable to handle virtual fonts or (given suitable \.{VF} or \.{OVF} files) +where this software cannot handle fonts with more than 128~characters; +and (2)~it serves as an example of a program that reads \.{DVI}, +\.{VF} and \.{OVF} files correctly, for system programmers who are developing +\.{DVI}-related software. + +Goal number (1) is important since quite a few existing programs have +to be adapted to the extened capabilities of Version~3 of \TeX\ which +will require some time. Moreover some existing programs are `as is' and +the source code is, unfortunately, not available. +Goal number (2) needs perhaps a bit more explanation. Programs for +typesetting need to be especially careful about how they do arithmetic; if +rounding errors accumulate, margins won't be straight, vertical rules +won't line up, and so on (see the documentaion of \.{DVItype} for more +details). This program is written as if it were a \.{DVI}-driver for a +hypothetical typesetting device |out_file|, the output file receiving +the copy of the input |dvi_file|. In addition all code related to +|out_file| is concentrated in two chapters at the end of this program +and quite independent of the rest of the code concerned with the +decoding of \.{DVI}, \.{VF} and \.{OVF} files and with font substitutions. Thus +it should be relatively easy to replace the device dependent code of +this program by the corresponding code required for a real typesetting +device. Having this in mind \.{DVItype}'s pixel rounding algorithms are +included as conditional code not used by \.{ODVIcopy}. + +The \.{ODVIcopy} program is an extension of \.{DVIcopy} that allows +the use of \.{OVF} and \.{OFM} files, which are used by the $\Omega$ +typesetting system. These files allows fonts with 65536 characters, +unlike ordinary \.{VF} and \.{TFM} files, which only allow 256 +characters. The definition for \.{OVF} files is identical to the one for +\.{VF} files. On the other hand, \.{OFM} files are different; their +documentation can be found in the $\Omega$ web. + +Unless the contrary is specified below, all references to \.{TFM} files +also refer to \.{OFM} files, similarly for \.{VF} and \.{OVF} files. +References to \.{DVIcopy} also apply to \.{ODVIcopy}. + + +The |banner| and |preamble_comment| strings defined here should be +changed whenever \.{ODVIcopy} gets modified. + +@d banner=='This is ODVIcopy, Version 1.5' {printed when the program starts} +@d title=='ODVIcopy' {the name of this program, used in some messages} +@d copyright== + '(C) 1990,95 P. Breitenlohner, 1994,97 J. Plaice and Y. Haralambous' +@# +@d preamble_comment=='ODVIcopy 1.5 output from ' +@d comm_length=25 {length of |preamble_comment|} +@d from_length=6 {length of its |' from '| part} + +@ This program is written in standard \PASCAL, except where it is necessary +to use extensions; for example, \.{DVIcopy} must read files whose names +are dynamically specified, and that would be impossible in pure \PASCAL. +All places where nonstandard constructions are used have been listed in +the index under ``system dependencies.'' +@!@^system dependencies@> + +One of the extensions to standard \PASCAL\ that we shall deal with is the +ability to move to a random place in a binary file; another is to +determine the length of a binary file. Such extensions are not necessary +for reading \.{DVI} files; since \.{DVIcopy} is (a model for) a +production program it should, however, be made as efficient as possible +for a particular system. If \.{DVIcopy} is being used with +\PASCAL s for which random file positioning is not efficiently available, +the following definition should be changed from |true| to |false|; in such +cases, \.{DVIcopy} will not include the optional feature that reads the +postamble first. + +@d random_reading==true {should we skip around in the file?} + +@ The program begins with a fairly normal header, made up of pieces that +@^system dependencies@> +will mostly be filled in later. The \.{DVI} input comes from file +|dvi_file|, the \.{DVI} output goes to file |out_file|, and messages +go to \PASCAL's standard |output| file. +The \.{TFM} and \.{VF} files are defined later since their external names +are determined dynamically. + +If it is necessary to abort the job because of a fatal error, the program +calls the `|jump_out|' procedure, which goes to the label |final_end|. + +@d final_end = 9999 {go here to wrap it up} + +@p @t\4@>@<Compiler directives@>@/ +program ODVI_copy(@!dvi_file,@!out_file,@!output); +label final_end; +const @<Constants in the outer block@>@/ +type @<Types in the outer block@>@/ +var @<Globals in the outer block@>@/ +@<Error handling procedures@>@/ +procedure initialize; {this procedure gets things started properly} + var @<Local variables for initialization@>@/ + begin print_ln(banner);@/ + print_ln(copyright); + print_ln('Distributed under terms of GNU General Public License');@/ + @<Set initial values@>@/ + end; + +@ The definition of |max_font_type| should be adapted to the number of +font types used by the program; the first three values have a fixed +meaning: |defined_font=0| indicates that a font has been defined, +|loaded_font=1| indicates that the \.{TFM} file has been loaded but the +font has not yet been used, and |vf_font_type=2| indicates a virtual +font. Font type values |>=real_font=3| indicate real fonts and +different font types are used to distinguish various kinds of font files +(\.{GF} or \.{PK} or \.{PXL}). \.{DVIcopy} uses |out_font_type=3| for +fonts that appear in the output \.{DVI} file. +@!@^font types@> + +@d defined_font=0 {this font has been defined} +@d loaded_font=1 {this font has been defined and loaded} +@d vf_font_type=2 {this font is a virtual font} +@d real_font=3 {smallest font type for real fonts} +@# +@d out_font_type=3 {this font appears in the output file} +@d max_font_type=3 + +@ The following parameters can be changed at compile time to extend or +reduce \.{DVIcopy}'s capacity. + +@d max_select=10 {maximum number of page selection ranges} + +@<Constants...@>= +@!max_fonts=100; {maximum number of distinct fonts} +@!max_chars=10000; {maximum number of different characters among all fonts} +@!max_widths=3000; {maximum number of different characters widths} +@!max_packets=5000; {maximum number of different characters packets; + must be less than 65536} +@!max_bytes=30000; {maximum number of bytes for characters packets} +@!max_recursion=10; {\.{VF} files shouldn't recurse beyond this level} +@!stack_size=100; {\.{DVI} files shouldn't |push| beyond this depth} +@!terminal_line_length=150; {maximum number of characters input in a single + line of input from the terminal} +@!name_length=50; {a file name shouldn't be longer than this} +@!neg_max_chars=-10000; {maximum number of different characters among all fonts} + +@ As mentioned above, \.{DVIcopy} has two chief purposes: (1)~It produces +a copy of the input \.{DVI} file with all references to characters from +virtual fonts replaced by their expansion as specified in the character +packets of \.{VF} files; and (2)~it serves as an example of a program +that reads \.{DVI} and \.{VF} files correctly, for system programmers +who are developing \.{DVI}-related software. + +In fact, a very large section of code (starting with the second chapter +`Introduction (continued)' and ending with the fifteenth chapter +`The main program') is used in identical form in \.{DVIcopy} and in +\.{DVIprint}, a prototype \.{DVI}-driver. This has been made possible +mostly by using several \.{WEB} coding tricks, such as not to make the +resulting \PASCAL\ program inefficient in any way. + +Parts of the program that are needed in \.{DVIprint} but not in +\.{DVIcopy} are delimited by the codewords `$|device|\ldots|ecived|$'; +these are mostly the pixel rounding algorithms used to convert the +\.{DVI} units of a \.{DVI} file to the raster units of a real output +device and have been copied more or less verbatim from \.{DVItype}. + +@d device==@{ {change this to `$\\{device}\equiv\null$' when output + for a real device is produced} +@d ecived==@t@>@} {change this to `$\\{ecived}\equiv\null$' when output + for a real device is produced} +@f device==begin +@f ecived==end + +@* Introduction (continued). +On some systems it is necessary to use various integer subrange types +in order to make \.{\title} efficient; this is true in particular for +frequently used variables such as loop indices. Consider an integer +variable |x| with values in the range |0..255|: on most small systems +|x| should be a one or two byte integer whereas on most large systems +|x| should be a four byte integer. +Clearly the author of a program knows best which range of values is +required for each variable; thus \.{\title} never uses \PASCAL's |integer| +type. All integer variables are declared as one of the integer subrange +types defined below as \.{WEB} macros or \PASCAL\ types; these definitions +can be used without system-dependent changes, provided the signed 32~bit +integers are a subset of the standard type |integer|, and the compiler +automatically uses the optimal representation for integer subranges +(both conditions need not be satisfied for a particular system). +@^system dependencies@> + +The complementary problem of storing large arrays of integer type +variables as compactly as possible is addressed differently; here +\.{\title} uses a \PASCAL\ |type|~declaration for each kind of array +element. + +Note that the primary purpose of these definitions is optimizations, not +range checking. All places where optimization for a particular system is +highly desirable have been listed in the index under ``optimization.'' +@!@^optimization@> + +@d int_32 == integer {signed 32~bit integers} + +@<Types...@>= +@!int_31 = 0..@"7FFFFFFF; {unsigned 31~bit integer} +@!int_24u = 0..@"FFFFFF; {unsigned 24~bit integer} +@!int_24 = -@"800000..@"7FFFFF; {signed 24~bit integer} +@!int_23 = 0..@"7FFFFF; {unsigned 23~bit integer} +@!int_16u = 0..@"FFFF; {unsigned 16~bit integer} +@!int_16 = -@"8000..@"7FFF; {signed 16~bit integer} +@!int_15 = 0..@"7FFF; {unsigned 15~bit integer} +@!int_8u = 0..@"FF; {unsigned 8~bit integer} +@!int_8 = -@"80..@"7F; {signed 8~bit integer} +@!int_7 = 0..@"7F; {unsigned 7~bit integer} + +@ Some of this code is optional for use when debugging only; +such material is enclosed between the delimiters |debug| and $|gubed|$. +Other parts, delimited by |stat| and $|tats|$, are optionally included +if statistics about \.{\title}'s memory usage are desired. + +@d debug==@{ {change this to `$\\{debug}\equiv\null$' when debugging} +@d gubed==@t@>@} {change this to `$\\{gubed}\equiv\null$' when debugging} +@f debug==begin +@f gubed==end +@# +@d stat==@{ {change this to `$\\{stat}\equiv\null$' + when gathering usage statistics} +@d tats==@t@>@} {change this to `$\\{tats}\equiv\null$' + when gathering usage statistics} +@f stat==begin +@f tats==end + +@ The \PASCAL\ compiler used to develop this program has ``compiler +directives'' that can appear in comments whose first character is a dollar sign. +In production versions of \.{\title} these directives tell the compiler that +@^system dependencies@> +it is safe to avoid range checks and to leave out the extra code it inserts +for the \PASCAL\ debugger's benefit, although interrupts will occur if +there is arithmetic overflow. + +@<Compiler directives@>= +@{@&$C-,A+,D-@} {no range check, catch arithmetic overflow, no debug overhead} +@!debug @{@&$C+,D+@}@+ gubed {but turn everything on when debugging} + +@ Labels are given symbolic names by the following definitions. We insert +the label `|exit|:' just before the `\ignorespaces|end|\unskip' of a +procedure in which we have used the `|return|' statement defined below; +the label `|restart|' is occasionally used at the very beginning of a +procedure; and the label `|reswitch|' is occasionally used just prior to +a \&{case} statement in which some cases change the conditions and we wish to +branch to the newly applicable case. +Loops that are set up with the \&{loop} construction defined below are +commonly exited by going to `|done|' or to `|found|' or to `|not_found|', +and they are sometimes repeated by going to `|continue|'. + +@d exit=10 {go here to leave a procedure} +@d restart=20 {go here to start a procedure again} +@d reswitch=21 {go here to start a case statement again} +@d continue=22 {go here to resume a loop} +@d done=30 {go here to exit a loop} +@d found=31 {go here when you've found it} +@d not_found=32 {go here when you've found something else} + +@ The term |print| is used instead of |write| when this program writes on +|output|, so that all such output could easily be redirected if desired; +the term |d_print| is used for conditional output if we are debugging. + +@d print(#)==write(output,#) +@d print_ln(#)==write_ln(output,#) +@d new_line==write_ln(output) {start new line} +@d print_nl(#)== {print information starting on a new line} + begin new_line; print(#); + end +@# +@d d_print(#)==@!debug print(#) @; @+ gubed +@d d_print_ln(#)==@! debug print_ln(#) @; @+ gubed + +@ Here are some macros for common programming idioms. + +@d incr(#) == #:=#+1 {increase a variable by unity} +@d decr(#) == #:=#-1 {decrease a variable by unity} +@# +@d Incr_Decr_end(#)==# +@d Incr(#)==#:=#+Incr_Decr_end {we use |Incr(a)(b)| to increase \dots} +@d Decr(#)==#:=#-Incr_Decr_end {\dots\ and |Decr(a)(b)| to decrease + variable |a| by |b|; this can be optimized for some compilers} +@# +@d loop == @+ while true do@+ {repeat over and over until a |goto| happens} +@d do_nothing == {empty statement} +@d return == goto exit {terminate a procedure call} +@f return == nil +@f loop == xclause + +@ We assume that |case| statements may include a default case that applies +if no matching label is found. Thus, we shall use constructions like +@^system dependencies@> +$$\vbox{\halign{#\hfil\cr +|case x of|\cr +1: $\langle\,$code for $x=1\,\rangle$;\cr +3: $\langle\,$code for $x=3\,\rangle$;\cr +|othercases| $\langle\,$code for |x<>1| and |x<>3|$\,\rangle$\cr +|endcases|\cr}}$$ +since most \PASCAL\ compilers have plugged this hole in the language by +incorporating some sort of default mechanism. For example, the compiler +used to develop \.{WEB} and \TeX\ allows `|others|:' as a default label, +and other \PASCAL s allow syntaxes like `\ignorespaces|else|\unskip' or +`\&{otherwise}' or `\\{otherwise}:', etc. The definitions of |othercases| +and |endcases| should be changed to agree with local conventions. (Of +course, if no default mechanism is available, the |case| statements of +this program must be extended by listing all remaining cases. +Donald~E. Knuth, the author of the \.{WEB} system program \.{TANGLE}, +@^Knuth, Donald Ervin@> +would have taken the trouble to modify \.{TANGLE} so that such extensions +were done automatically, if he had not wanted to encourage \PASCAL\ +compiler writers to make this important change in \PASCAL, where it belongs.) + +@d othercases == others: {default for cases not listed explicitly} +@d endcases == @+end {follows the default case in an extended |case| statement} +@f othercases == else +@f endcases == end + +@* The character set. +Like all programs written with the \.{WEB} system, \.{\title} can be +used with any character set. But it uses ASCII code internally, because +the programming for portable input-output is easier when a fixed internal +code is used, and because \.{DVI} and \.{VF} files use ASCII code for +file names and certain other strings. + +The next few sections of \.{\title} have therefore been copied from the +analogous ones in the \.{WEB} system routines. They have been considerably +simplified, since \.{\title} need not deal with the controversial +ASCII codes less than @'40 or greater than @'176. +If such codes appear in the \.{DVI} file, +they will be printed as question marks. + +@<Types...@>= +@!ASCII_code=" ".."~"; {a subrange of the integers} + +@ The original \PASCAL\ compiler was designed in the late 60s, when six-bit +character sets were common, so it did not make provision for lower case +letters. Nowadays, of course, we need to deal with both upper and lower case +alphabets in a convenient way, especially in a program like \.{\title}. +So we shall assume that the \PASCAL\ system being used for \.{\title} +has a character set containing at least the standard visible characters +of ASCII code (|"!"| through |"~"|). + +Some \PASCAL\ compilers use the original name |char| for the data type +associated with the characters in text files, while other \PASCAL s +consider |char| to be a 64-element subrange of a larger data type that has +some other name. In order to accommodate this difference, we shall use +the name |text_char| to stand for the data type of the characters in the +output file. We shall also assume that |text_char| consists of +the elements |chr(first_text_char)| through |chr(last_text_char)|, +inclusive. The following definitions should be adjusted if necessary. +@^system dependencies@> + +@d text_char == char {the data type of characters in text files} +@d first_text_char=0 {ordinal number of the smallest element of |text_char|} +@d last_text_char=127 {ordinal number of the largest element of |text_char|} + +@<Types...@>= +@!text_file=packed file of text_char; + +@ @<Local variables for init...@>= +@!i:int_16; {loop index for initializations} + +@ The \.{\title} processor converts between ASCII code and +the user's external character set by means of arrays |xord| and |xchr| +that are analogous to \PASCAL's |ord| and |chr| functions. + +@<Globals...@>= +@!xord: array [text_char] of ASCII_code; + {specifies conversion of input characters} +@!xchr: array [0..255] of text_char; + {specifies conversion of output characters} + +@ Under our assumption that the visible characters of standard ASCII are +all present, the following assignment statements initialize the +|xchr| array properly, without needing any system-dependent changes. + +@<Set init...@>= +for i:=0 to @'37 do xchr[i]:='?'; +xchr[@'40]:=' '; +xchr[@'41]:='!'; +xchr[@'42]:='"'; +xchr[@'43]:='#'; +xchr[@'44]:='$'; +xchr[@'45]:='%'; +xchr[@'46]:='&'; +xchr[@'47]:='''';@/ +xchr[@'50]:='('; +xchr[@'51]:=')'; +xchr[@'52]:='*'; +xchr[@'53]:='+'; +xchr[@'54]:=','; +xchr[@'55]:='-'; +xchr[@'56]:='.'; +xchr[@'57]:='/';@/ +xchr[@'60]:='0'; +xchr[@'61]:='1'; +xchr[@'62]:='2'; +xchr[@'63]:='3'; +xchr[@'64]:='4'; +xchr[@'65]:='5'; +xchr[@'66]:='6'; +xchr[@'67]:='7';@/ +xchr[@'70]:='8'; +xchr[@'71]:='9'; +xchr[@'72]:=':'; +xchr[@'73]:=';'; +xchr[@'74]:='<'; +xchr[@'75]:='='; +xchr[@'76]:='>'; +xchr[@'77]:='?';@/ +xchr[@'100]:='@@'; +xchr[@'101]:='A'; +xchr[@'102]:='B'; +xchr[@'103]:='C'; +xchr[@'104]:='D'; +xchr[@'105]:='E'; +xchr[@'106]:='F'; +xchr[@'107]:='G';@/ +xchr[@'110]:='H'; +xchr[@'111]:='I'; +xchr[@'112]:='J'; +xchr[@'113]:='K'; +xchr[@'114]:='L'; +xchr[@'115]:='M'; +xchr[@'116]:='N'; +xchr[@'117]:='O';@/ +xchr[@'120]:='P'; +xchr[@'121]:='Q'; +xchr[@'122]:='R'; +xchr[@'123]:='S'; +xchr[@'124]:='T'; +xchr[@'125]:='U'; +xchr[@'126]:='V'; +xchr[@'127]:='W';@/ +xchr[@'130]:='X'; +xchr[@'131]:='Y'; +xchr[@'132]:='Z'; +xchr[@'133]:='['; +xchr[@'134]:='\'; +xchr[@'135]:=']'; +xchr[@'136]:='^'; +xchr[@'137]:='_';@/ +xchr[@'140]:='`'; +xchr[@'141]:='a'; +xchr[@'142]:='b'; +xchr[@'143]:='c'; +xchr[@'144]:='d'; +xchr[@'145]:='e'; +xchr[@'146]:='f'; +xchr[@'147]:='g';@/ +xchr[@'150]:='h'; +xchr[@'151]:='i'; +xchr[@'152]:='j'; +xchr[@'153]:='k'; +xchr[@'154]:='l'; +xchr[@'155]:='m'; +xchr[@'156]:='n'; +xchr[@'157]:='o';@/ +xchr[@'160]:='p'; +xchr[@'161]:='q'; +xchr[@'162]:='r'; +xchr[@'163]:='s'; +xchr[@'164]:='t'; +xchr[@'165]:='u'; +xchr[@'166]:='v'; +xchr[@'167]:='w';@/ +xchr[@'170]:='x'; +xchr[@'171]:='y'; +xchr[@'172]:='z'; +xchr[@'173]:='{'; +xchr[@'174]:='|'; +xchr[@'175]:='}'; +xchr[@'176]:='~'; +for i:=@'177 to 255 do xchr[i]:='?'; + +@ The following system-independent code makes the |xord| array contain a +suitable inverse to the information in |xchr|. + +@<Set init...@>= +for i:=first_text_char to last_text_char do xord[chr(i)]:=@'40; +for i:=" " to "~" do xord[xchr[i]]:=i; + +@* Reporting errors to the user. +The \.{\title} processor does not verify that every single bit read from +one of its binary input files is meaningful and consistent; there are +other programs, e.g., \.{DVItype}, \.{TFtoPL}, and \.{VFtoPL}, specially +designed for that purpose. + +On the other hand, \.{\title} is designed to avoid unpredictable results +due to undetected arithmetic overflow, or due to violation of integer +subranges or array bounds under {\it all\/} circumstances. Thus a fair +amount of checking is done when reading and analyzing the input data, +even in cases where such checking reduces the efficiency of the program +to some extent. + +@ A global variable called |history| will contain one of four values +at the end of every run: |spotless| means that no unusual messages were +printed; |harmless_message| means that a message of possible interest +was printed but no serious errors were detected; |error_message| means that +at least one error was found; |fatal_message| means that the program +terminated abnormally. The value of |history| does not influence the +behavior of the program; it is simply computed for the convenience +of systems that might want to use such information. + +@d spotless=0 {|history| value for normal jobs} +@d harmless_message=1 {|history| value when non-serious info was printed} +@d error_message=2 {|history| value when an error was noted} +@d fatal_message=3 {|history| value when we had to stop prematurely} +@# +@d mark_harmless==@t@>@+if history=spotless then history:=harmless_message +@d mark_error==history:=error_message +@d mark_fatal==history:=fatal_message + +@<Glob...@>=@!history:spotless..fatal_message; {how bad was this run?} + +@ @<Set init...@>=history:=spotless; + +@ If an input (\.{DVI}, \.{TFM}, \.{VF}, or other) file is badly malformed, +the whole process must be aborted; \.{\title} will give up, after issuing +an error message about what caused the error. These messages will, however, +in most cases just indicate which input file caused the error. One of the +programs \.{DVItype}, \.{TFtoPL} or \.{VFtoVP} should then be used to +diagnose the error in full detail. + +Such errors might be discovered inside of subroutines inside of subroutines, +so a procedure called |jump_out| has been introduced. This procedure, which +transfers control to the label |final_end| at the end of the program, +contains the only non-local |@!goto| statement in \.{\title}. +@^system dependencies@> +Some \PASCAL\ compilers do not implement non-local |goto| statements. In +such cases the |goto final_end| in |jump_out| should simply be replaced +by a call on some system procedure that quietly terminates the program. +@^system dependencies@> + +@d abort(#)==begin print_ln(' ',#,'.'); jump_out; + end + +@<Error handling...@>= +@<Basic printing procedures@>@; +procedure close_files_and_terminate; forward; +@# +procedure jump_out; +begin mark_fatal; close_files_and_terminate; +goto final_end; +end; + +@ Sometimes the program's behavior is far different from what it should +be, and \.{\title} prints an error message that is really for the +\.{\title} maintenance person, not the user. In such cases the program +says |confusion(|indication of where we are|)|. + +@<Error handling...@>= +procedure confusion(@!p:pckt_pointer); +begin print(' !This can''t happen ('); print_packet(p); print_ln(').'); +@.This can't happen@> +jump_out; +end; + +@ An overflow stop occurs if \.{\title}'s tables aren't large enough. + +@<Error handling...@>= +procedure overflow(@!p:pckt_pointer;@!n:int_16u); +begin print(' !Sorry, ',title,' capacity exceeded ['); print_packet(p); +@.Sorry, {\title} capacity exceeded@> +print_ln('=',n:1,'].'); +jump_out; +end; + +@* Binary data and binary files. +A detailed description of the \.{DVI} file format can be found in the +documentation of \TeX, \.{DVItype}, or \.{GFtoDVI}; here we just define +symbolic names for some of the \.{DVI} command bytes. + +@d set_char_0=0 {typeset character 0 and move right} +@d set1=128 {typeset a character and move right} +@d set_rule=132 {typeset a rule and move right} +@d put1=133 {typeset a character} +@d put_rule=137 {typeset a rule} +@d nop=138 {no operation} +@d bop=139 {beginning of page} +@d eop=140 {ending of page} +@d push=141 {save the current positions} +@d pop=142 {restore previous positions} +@d right1=143 {move right} +@d w0=147 {move right by |w|} +@d w1=148 {move right and set |w|} +@d x0=152 {move right by |x|} +@d x1=153 {move right and set |x|} +@d down1=157 {move down} +@d y0=161 {move down by |y|} +@d y1=162 {move down and set |y|} +@d z0=166 {move down by |z|} +@d z1=167 {move down and set |z|} +@d fnt_num_0=171 {set current font to 0} +@d fnt1=235 {set current font} +@d xxx1=239 {extension to \.{DVI} primitives} +@d xxx4=242 {potentially long extension to \.{DVI} primitives} +@d fnt_def1=243 {define the meaning of a font number} +@d pre=247 {preamble} +@d post=248 {postamble beginning} +@d post_post=249 {postamble ending} +@# +@d dvi_id=2 {identifies \.{DVI} files} +@d dvi_pad=223 {pad bytes at end of \.{DVI} file} + +@ A \.{DVI}, \.{VF}, or \.{TFM} file is a sequence of 8-bit bytes. +The bytes appear physically in what is called a `|packed file of 0..255|' +in \PASCAL\ lingo. One, two, three, or four consecutive bytes are often +interpreted as (signed or unsigned) integers. +We might as well define the corresponding data types. +@!@^system dependencies@> + +@<Types...@>= +@!signed_byte=-@"80..@"7F; {signed one-byte quantity} +@!eight_bits=0..@"FF; {unsigned one-byte quantity} +@!signed_pair=-@"8000..@"7FFF; {signed two-byte quantity} +@!sixteen_bits=0..@"FFFF; {unsigned two-byte quantity} +@!signed_trio=-@"800000..@"7FFFFF; {signed three-byte quantity} +@!twentyfour_bits=0..@"FFFFFF; {unsigned three-byte quantity} +@!signed_quad=int_32; {signed four-byte quantity} + +@ Packing is system dependent, and many \PASCAL\ systems fail to implement +such files in a sensible way (at least, from the viewpoint of producing +good production software). For example, some systems treat all +byte-oriented files as text, looking for end-of-line marks and such +things. Therefore some system-dependent code is often needed to deal with +binary files, even though most of the program in this section of +\.{\title} is written in standard \PASCAL. +@^system dependencies@> + +One common way to solve the problem is to consider files of |integer| +numbers, and to convert an integer in the range $-2^{31}\L x<2^{31}$ to +a sequence of four bytes $(a,b,c,d)$ using the following code, which +avoids the controversial integer division of negative numbers: +$$\vbox{\halign{#\hfil\cr +|if x>=0 then a:=x div @'100000000|\cr +|else begin x:=(x+@'10000000000)+@'10000000000; a:=x div @'100000000+128;|\cr +\quad|end|\cr +|x:=x mod @'100000000;|\cr +|b:=x div @'200000; x:=x mod @'200000;|\cr +|c:=x div @'400; d:=x mod @'400;|\cr}}$$ +The four bytes are then kept in a buffer and output one by one. (On 36-bit +computers, an additional division by 16 is necessary at the beginning. +Another way to separate an integer into four bytes is to use/abuse +\PASCAL's variant records, storing an integer and retrieving bytes that are +packed in the same place; {\sl caveat implementor!\/}) It is also desirable +in some cases to read a hundred or so integers at a time, maintaining a +larger buffer. + +@ We shall stick to simple \PASCAL\ in the standard version of this program, +for reasons of clarity, even if such simplicity is sometimes unrealistic. + +@<Types...@>= +@!byte_file=packed file of eight_bits; {files that contain binary data} + +@ For some operating systems it may be convenient or even necessary to +close the input files. + +@d close_in(#)==do_nothing {close an input file} + +@ Character packets extracted from \.{VF} files will be stored in a large +array |byte_mem|. Other packets of bytes, e.g., character packets +extracted from a \.{GF} or \.{PK} or \.{PXL} file could be stored in the +same way. A `|pckt_pointer|' variable, which signifies a packet, +is an index into another array |pckt_start|. The actual sequence of bytes +in the packet pointed to by |p| appears in positions |pckt_start[p]| to +|pckt_start[p+1]-1|, inclusive, in |byte_mem|. + +Packets will also be used to store sequences of |ASCII_code|s; in this +respect the |byte_mem| array is very similar to \TeX's string pool and +part of the following code has, in fact, been copied more or less +verbatim from \TeX. + +In other respects the packets resemble the identifiers used by +\.{TANGLE} and \.{WEAVE} (also stored in an array called |byte_mem|) +since there is, in general, at most one packet with a given contents; +thus part of the code below has been adapted from the corresponding code +in these programs. + +Some \PASCAL\ compilers won't pack integers into a single byte unless the +integers lie in the range |-128..127|. To accommodate such systems we +access the array |byte_mem| only via macros that can easily be redefined. +@^system dependencies@> + +@d bi(#) == # {convert from |eight_bits| to |packed_byte|} +@d bo(#) == # {convert from |packed_byte| to |eight_bits|} + +@<Types...@>= +@!packed_byte = eight_bits; {elements of |byte_mem| array} +@!byte_pointer = 0..max_bytes; {an index into |byte_mem|} +@!pckt_pointer = 0..max_packets; {an index into |pckt_start|} + +@ The global variable |byte_ptr| points to the first unused location in +|byte_mem| and |pckt_ptr| points to the first unused location in +|pckt_start|. + +@<Globals...@>= +@!byte_mem: packed array [byte_pointer] of packed_byte; {bytes of packets} +@!pckt_start: array [pckt_pointer] of byte_pointer; + {directory into |byte_mem|} +@!byte_ptr: byte_pointer; +@!pckt_ptr: pckt_pointer; + +@ Several of the elementary operations with packets are performed using +\.{WEB} macros instead of \PASCAL\ procedures, because many of the +operations are done quite frequently and we want to avoid the +overhead of procedure calls. For example, here is +a simple macro that computes the length of a packet. +@.WEB@> + +@d pckt_length(#)==(pckt_start[#+1]-pckt_start[#]) {the number of bytes + in packet number \#} + +@ Packets are created by appending bytes to |byte_mem|. +The |append_byte| macro, defined here, does not check to see if the +value of |byte_ptr| has gotten too high; this test is supposed to be +made before |append_byte| is used. There is also a |flush_byte| +macro, which erases the last byte appended. + +To test if there is room to append |l| more bytes to |byte_mem|, +we shall write |pckt_room(l)|, which aborts \.{\title} and gives an +apologetic error message if there isn't enough room. + +@d append_byte(#) == {put byte \# at the end of |byte_mem|} +begin byte_mem[byte_ptr]:=bi(#); incr(byte_ptr); +end +@d flush_byte == decr(byte_ptr) {forget the last byte in |byte_mem|} +@d pckt_room(#) == {make sure that |byte_mem| hasn't overflowed} + if max_bytes-byte_ptr<# then overflow(str_bytes,max_bytes) +@# +@d append_one(#) == +begin pckt_room(1); append_byte(#); +end + +@ The length of the current packet is called |cur_pckt_length|: + +@d cur_pckt_length == (byte_ptr - pckt_start[pckt_ptr]) + +@ Once a sequence of bytes has been appended to |byte_mem|, it +officially becomes a packet when the |make_packet| function is called. +This function returns as its value the identification number of either +an existing packet with the same contents or, if no such packet exists, +of the new packet. Thus two packets have the same contents if and only +if they have the same identification number. In order to locate the +packet with a given contents, or to find out that no such packet exists, +we need a hash table. The hash table is kept by the method of simple +chaining, where the heads of the individual lists appear in the |p_hash| +array. If |h| is a hash code, the hash table list starts at |p_hash[h]| +and proceeds through |p_link| pointers. + +@d hash_size=353 {should be prime, must be |>256|} + +@<Types...@>= +@!hash_code=0..hash_size; + +@ @<Glob...@>= +@!p_link:array[pckt_pointer] of pckt_pointer; {hash table} +@!p_hash:array[hash_code] of pckt_pointer; + +@ Initially |byte_mem| and all the hash lists are empty; |empty_packet| +is the empty packet. + +@d empty_packet=0 {the empty packet} +@d invalid_packet==max_packets {used when there is no packet} + +@<Set init...@>= +pckt_ptr:=1; byte_ptr:=1; +pckt_start[0]:=1; pckt_start[1]:=1; +for h:=0 to hash_size-1 do p_hash[h]:=0; + +@ @<Local variables for init...@>= +@!h:hash_code; {index into hash-head arrays} + +@ Here now is the |make_packet| function used to create packets (and +strings). + +@p function make_packet:pckt_pointer; +label found; +var i,@!k:byte_pointer; {indices into |byte_mem|} +@!h:hash_code; {hash code} +@!s,@!l:byte_pointer; {start and length of the given packet} +@!p:pckt_pointer; {where the packet is being sought} +begin s:=pckt_start[pckt_ptr]; l:=byte_ptr-s; {compute start and length} +if l=0 then p:=empty_packet +else begin @<Compute the packet hash code |h|@>; + @<Compute the packet location |p|@>; + if pckt_ptr=max_packets then overflow(str_packets,max_packets); + incr(pckt_ptr); pckt_start[pckt_ptr]:=byte_ptr; + end; +found:make_packet:=p; +end; + +@ A simple hash code is used: If the sequence of bytes is +$b_1b_2\ldots b_n$, its hash value will be +$$(2^{n-1}b_1+2^{n-2}b_2+\cdots+b_n)\,\bmod\,|hash_size|.$$ + +@<Compute the packet hash...@>= +h:=bo(byte_mem[s]); i:=s+1; +while i<byte_ptr do + begin h:=(h+h+bo(byte_mem[i])) mod hash_size; incr(i); + end + +@ If the packet is new, it will be placed in position |p=pckt_ptr|, +otherwise |p| will point to its existing location. + +@<Compute the packet location...@>= +p:=p_hash[h]; +while p<>0 do + begin if pckt_length(p)=l then + @<Compare packet |p| with current packet, |goto found| if equal@>; + p:=p_link[p]; + end; +p:=pckt_ptr; {the current packet is new} +p_link[p]:=p_hash[h]; p_hash[h]:=p {insert |p| at beginning of hash list} + +@ @<Compare packet |p|...@>= +begin i:=s; k:=pckt_start[p]; +while (i<byte_ptr)and(byte_mem[i]=byte_mem[k]) do + begin incr(i); incr(k); + end; +if i=byte_ptr then {all bytes agree} + begin byte_ptr:=pckt_start[pckt_ptr]; goto found; + end; +end + +@ Some packets are initialized with predefined strings of |ASCII_code|s; +a few macros permit us to do the initialization with a compact program. +Since this initialization is done when |byte_mem| is still empty, and +since |byte_mem| is supposed to be large enough for all the predefined +strings, |pckt_room| is used only if we are debugging. + +@d pid0(#)==#:=make_packet +@d pid1(#)==byte_mem[byte_ptr-1]:=bi(#); pid0 +@d pid2(#)==byte_mem[byte_ptr-2]:=bi(#); pid1 +@d pid3(#)==byte_mem[byte_ptr-3]:=bi(#); pid2 +@d pid4(#)==byte_mem[byte_ptr-4]:=bi(#); pid3 +@d pid5(#)==byte_mem[byte_ptr-5]:=bi(#); pid4 +@d pid6(#)==byte_mem[byte_ptr-6]:=bi(#); pid5 +@d pid7(#)==byte_mem[byte_ptr-7]:=bi(#); pid6 +@d pid8(#)==byte_mem[byte_ptr-8]:=bi(#); pid7 +@d pid9(#)==byte_mem[byte_ptr-9]:=bi(#); pid8 +@d pid10(#)==byte_mem[byte_ptr-10]:=bi(#); pid9 +@# +@d pid_init(#)== + @!debug pckt_room(#); @+ gubed @; + Incr(byte_ptr)(#) +@# +@d id1==pid_init(1); pid1 +@d id2==pid_init(2); pid2 +@d id3==pid_init(3); pid3 +@d id4==pid_init(4); pid4 +@d id5==pid_init(5); pid5 +@d id6==pid_init(6); pid6 +@d id7==pid_init(7); pid7 +@d id8==pid_init(8); pid8 +@d id9==pid_init(9); pid9 +@d id10==pid_init(10); pid10 + +@ Here we initialize some strings used as argument of the |overflow| and +|confusion| procedures. + +@<Initialize predefined strings@>= +id5("f")("o")("n")("t")("s")(str_fonts); +id5("c")("h")("a")("r")("s")(str_chars); +id6("w")("i")("d")("t")("h")("s")(str_widths); +id7("p")("a")("c")("k")("e")("t")("s")(str_packets); +id5("b")("y")("t")("e")("s")(str_bytes); +id9("r")("e")("c")("u")("r")("s")("i")("o")("n")(str_recursion); +id5("s")("t")("a")("c")("k")(str_stack); +id10("n")("a")("m")("e")("l")("e")("n")("g")("t")("h")(str_name_length); + +@ @<Glob...@>= +@!str_fonts,@!str_chars,@!str_widths,@!str_packets,@!str_bytes, +@!str_recursion,@!str_stack,@!str_name_length:pckt_pointer; + +@ Some packets, e.g., the preamble comments of \.{DVI} and \.{VF} files, +are needed only temporarily. In such cases |new_packet| is used to +create a packet (which might duplicate an existing packet) and +|flush_packet| is used to discard it; the calls to |new_packet| and +|flush_packet| must occur in balanced pairs, without any intervening +calls to |make_packet|. + +@p function new_packet: pckt_pointer; +begin if pckt_ptr=max_packets then overflow(str_packets,max_packets); +new_packet:=pckt_ptr; incr(pckt_ptr); pckt_start[pckt_ptr]:=byte_ptr; +end; +@# +procedure flush_packet; +begin decr(pckt_ptr); byte_ptr:=pckt_start[pckt_ptr]; +end; + +@ The |print_packet| procedure prints the contents of a packet; such a +packets should, of course, consists of a sequence of |ASCII_code|s. + +@<Basic printing...@>= +procedure print_packet(p:pckt_pointer); +var k:byte_pointer; +begin for k:=pckt_start[p] to pckt_start[p+1]-1 do + print(xchr[bo(byte_mem[k])]); +end; + +@ When we interpret a packet we will use two (global or local) variables: +|cur_loc| will point to the byte to be used next, and |cur_limit| will +point to the start of the next packet. The macro |pckt_extract| will be +used to extract one byte; it should, however, never be used with +|cur_loc>=cur_limit|. + +@d pckt_extract(#) == +@!debug if cur_loc>=cur_limit then confusion(str_packets) @+ else @/ +gubed @; + begin #:=bo(byte_mem[cur_loc]); incr(cur_loc); @+ end + +@<Globals...@>= +@!cur_pckt: pckt_pointer; {the current packet} +@!cur_loc: byte_pointer; {current location in a packet} +@!cur_limit: byte_pointer; {start of next packet} + +@ We will need routines to extract one, two, three, or four bytes from +|byte_mem|, from the \.{DVI} file, or from a \.{VF} file and assemble +them into (signed or unsigned) integers and these routines should be +optimized for efficiency. Here we define \.{WEB} macros to be used for +the body of these routines; thus the changes for system dependent +optimization have to be applied only once. +@^system dependencies@> +@^optimization@> + +In addition we demonstrates how these macros can be used to define +functions that extract one, two, three, or four bytes from a character +packet and assemble them into signed or unsigned integers (assuming that +|cur_loc| and |cur_limit| are initialized suitably). + +@d begin_byte(#) == +var a:eight_bits; +begin #(a) +@d comp_sbyte(#) == if a<128 then #:=a @+ else #:=a-256 +@d comp_ubyte(#) == #:=a +@f begin_byte == begin + +@p function pckt_sbyte:int_8; {returns the next byte, signed} +@!begin_byte(pckt_extract); comp_sbyte(pckt_sbyte); +end; +@# +function pckt_ubyte:int_8u; {returns the next byte, unsigned} +@!begin_byte(pckt_extract); comp_ubyte(pckt_ubyte); +end; + +@ @d begin_pair(#) == +var a,@!b:eight_bits; +begin #(a); #(b) +@d comp_spair(#) == if a<128 then #:=a*256+b @+ else #:=(a-256)*256+b +@d comp_upair(#) == #:=a*256+b +@f begin_pair == begin + +@p function pckt_spair:int_16; {returns the next two bytes, signed} +@!begin_pair(pckt_extract); comp_spair(pckt_spair); +end; +@# +function pckt_upair:int_16u; {returns the next two bytes, unsigned} +@!begin_pair(pckt_extract); comp_upair(pckt_upair); +end; + +@ @d begin_trio(#) == +var a,@!b,@!c:eight_bits; +begin #(a); #(b); #(c) +@d comp_strio(#) == +if a<128 then #:=(a*256+b)*256+c @+ else #:=((a-256)*256+b)*256+c +@d comp_utrio(#) == #:=(a*256+b)*256+c +@f begin_trio == begin + +@p function pckt_strio:int_24; {returns the next three bytes, signed} +@!begin_trio(pckt_extract); comp_strio(pckt_strio); +end; +@# +function pckt_utrio:int_24u; {returns the next three bytes, unsigned} +@!begin_trio(pckt_extract); comp_utrio(pckt_utrio); +end; + +@ @d begin_quad(#) == +var a,@!b,@!c,@!d:eight_bits; +begin #(a); #(b); #(c); #(d) +@d comp_squad(#) == +if a<128 then #:=((a*256+b)*256+c)*256+d +else #:=(((a-256)*256+b)*256+c)*256+d +@f begin_quad == begin + +@p function pckt_squad:int_32; {returns the next four bytes, signed} +@!begin_quad(pckt_extract); comp_squad(pckt_squad); +end; + +@ A similar set of routines is needed for the inverse task of +decomposing a \.{DVI} command into a sequence of bytes to be appended +to |byte_mem| or, in the case of \.{DVIcopy}, to be written to the +output file. Again we define \.{WEB} macros to be used for the body +of these routines; thus the changes for system dependent optimization +have to be applied only once. +@^system dependencies@> +@^optimization@> + +First, the |pckt_one| outputs one byte, negative values are represented +in two's complement notation. + +@d begin_one == begin +@d comp_one(#) == +if x<0 then Incr(x)(256); +#(x) +@f begin_one == begin + +@p @!device +procedure pckt_one(@!x:int_32); {output one byte} +@!begin_one; pckt_room(1); comp_one(append_byte); +end; +ecived + +@ The |pckt_two| outputs two bytes, negative values are represented in +two's complement notation. + +@d begin_two == begin +@d comp_two(#) == +if x<0 then Incr(x)(@"10000); +#(x div @"100); #(x mod @"100) +@f begin_two == begin + +@p @!device +procedure pckt_two(@!x:int_32); {output two byte} +@!begin_two; pckt_room(2); comp_two(append_byte); +end; +ecived + +@ The |pckt_four| procedure outputs four bytes in two's complement +notation, without risking arithmetic overflow. + +@d begin_four == begin +@d comp_four(#) == +if x>=0 then #(x div @"1000000) +else begin Incr(x)(@"40000000); Incr(x)(@"40000000); + #((x div @"1000000) + 128); + end; +x:=x mod @"1000000; #(x div @"10000); +x:=x mod @"10000; #(x div @"100); +#(x mod @"100) +@f begin_four == begin + +@p procedure pckt_four(@!x:int_32); {output four bytes} +@!begin_four; pckt_room(4); comp_four(append_byte); +end; + +@ Next, the |pckt_char| procedure outputs a |set_char| or \\{set} command +or, if |upd=false|, a |put| command. + +@d begin_char == +var o:eight_bits; {|set1| or |put1|} +begin +@d comp_char(#) == +if (res>=0) and (res<@"100) then begin + if (not upd)or(res>127)or(ext<>0) then + begin o:=dvi_char_cmd[upd]; {|set1| or |put1|} + if ext<0 then Incr(ext)(@"1000000); + if ext=0 then #(o) @+ else @; + begin if ext<@"100 then #(o+1) @+ else @; + begin if ext<@"10000 then #(o+2) @+ else @; + begin #(o+3); #(ext div @"10000); ext:=ext mod @"10000; + end; + #(ext div @"100); ext:=ext mod @"100; + end; + #(ext); + end; + end; + #(res) + end +else + begin if (res>=0) and (res<@"10000) then #(o+1) @+ else @; + begin if (res>=0) and (res<@"1000000) then #(o+2) @+ else @; + begin #(o+3); + if res>=0 then #(res div @"1000000) + else begin Incr(res)(@"40000000); Incr(res)(@"40000000); + #((res div @"1000000) + 128); res:=res mod @"1000000; + end; + res:=res mod @"1000000 + end; + #(res div @"10000); res:= res mod @"10000 + end; + #(res div @"100); res:=res mod @"100; #(res) + end + +@f begin_char == begin + +@p procedure pckt_char(@!upd:boolean;@!ext:int_32;@!res:int_32); + {output \\{set} or |put|} +@!begin_char; pckt_room(5); comp_char(append_byte); +end; + +@ Then, the |pckt_unsigned| procedure outputs a |fnt| or |xxx| +command with its first parameter (normally unsigned); a |fnt| command +is converted into |fnt_num| whenever this is possible. + +@d begin_unsigned == begin +@d comp_unsigned(#) == +if (x<@"100)and(x>=0) then + if (o=fnt1)and(x<64) then Incr(x)(fnt_num_0) @+ else #(o) +else + begin if (x<@"10000)and(x>=0) then #(o+1) @+ else @; + begin if (x<@"1000000)and(x>=0) then #(o+2) @+ else @; + begin #(o+3); + if x>=0 then #(x div @"1000000) + else begin Incr(x)(@"40000000); Incr(x)(@"40000000); + #((x div @"1000000) + 128); + end; + x:=x mod @"1000000; + end; + #(x div @"10000); x:=x mod @"10000; + end; + #(x div @"100); x:=x mod @"100; + end; +#(x) +@f begin_unsigned == begin + +@p procedure pckt_unsigned(@!o:eight_bits;@!x:int_32); + {output |fnt_num|, |fnt|, or |xxx|} +@!begin_unsigned; pckt_room(5); comp_unsigned(append_byte); +end; + +@ Finally, the |pckt_signed| procedure outputs a movement (|right|, |w|, +|x|, |down|, |y|, or |z|) command with its (signed) parameter. + +@d begin_signed == +var xx:int_31; {`absolute value' of |x|} +begin +@d comp_signed(#) == +if x>=0 then xx:=x @+ else xx:=-(x+1); +if xx<@"80 then + begin #(o); @+ if x<0 then Incr(x)(@"100); @+ end +else begin if xx<@"8000 then + begin #(o+1); @+ if x<0 then Incr(x)(@"10000); @+ end + else begin if xx<@"800000 then + begin #(o+2); @+ if x<0 then Incr(x)(@"1000000); @+ end + else begin #(o+3); + if x>=0 then #(x div @"1000000) + else begin x:=@"7FFFFFFF-xx; #((x div @"1000000) + 128); @+ end; + x:=x mod @"1000000; + end; + #(x div @"10000); x:=x mod @"10000; + end; + #(x div @"100); x:=x mod @"100; + end; +#(x) +@f begin_signed == begin + +@p procedure pckt_signed(@!o:eight_bits;@!x:int_32); + {output |right|, |w|, |x|, |down|, |y|, or |z|} +@!begin_signed; pckt_room(5); comp_signed(append_byte); +end; + +@ The |hex_packet| procedure prints the contents of a packet in +hexadecimal form. + +@<Basic printing...@>= +@!debug procedure hex_packet(@!p:pckt_pointer); {prints a packet in hex} +var j,@!k,@!l:byte_pointer; {indices into |byte_mem|} +@!d:int_8u; +begin j:=pckt_start[p]-1; k:=pckt_start[p+1]-1; +print_ln(' packet=',p:1,' start=',j+1:1,' length=',k-j:1); +for l:=j+1 to k do + begin d:=(bo(byte_mem[l])) div 16; + if d<10 then print(xchr[d+"0"]) @+ else print(xchr[d-10+"A"]); + d:=(bo(byte_mem[l])) mod 16; + if d<10 then print(xchr[d+"0"]) @+ else print(xchr[d-10+"A"]); + if (l=k)or(((l-j) mod 16)=0) then new_line + else if ((l-j) mod 4)=0 then print(' ') + else print(' '); + end; +end; +gubed + +@* File names. +The structure of file names is different for different systems; therefore +this part of the program will, in most cases, require system dependent +modifications. Here we assume that a file name consists of three parts: +an area or directory specifying where the file can be found, a name +proper and an extension; \.{\title} assumes that these three parts appear +in order stated above but this need not be true in all cases. + +The font names extracted from \.{DVI} and \.{VF} files consist of an area +part and a name proper; these are stored as packets consisting of the +length of the area part followed by the area and the name proper. +When we print an external font name we simple print the area and the name +contained in the `file name packet' without delimiter between them. +This may need to be modified for some systems. +@^system dependencies@> + +@<Basic printing...@>= +procedure print_font(@!f:font_number); +var p:pckt_pointer; {the font name packet} +@!k:byte_pointer; {index into |byte_mem|} +@!m:int_31; {font magnification} +begin print(' = '); p:=font_name(f); +for k:=pckt_start[p]+1 to pckt_start[p+1]-1 do + print(xchr[bo(byte_mem[k])]); +m:=round((font_scaled(f)/font_design(f))*out_mag); +if m<>1000 then print(' scaled ',m:1); +end; + +@ Before a font file can be opened for input we must build a string +with its external name. + +@<Glob...@>= +@!cur_name:packed array[1..name_length] of char; {external name, + with no lower case letters} +@!l_cur_name:int_15; {this many characters are actually relevant in + |cur_name|} + +@ For \.{TFM} and \.{VF} files we just append the apropriate extension +to the file name packet; in addition a system dependent area part +(usually different for \.{TFM} and \.{VF} files) is prepended if +the file name packet contains no area part. +@^system dependencies@> + +@d append_to_name(#)== + if l_cur_name<name_length then + begin incr(l_cur_name); cur_name[l_cur_name]:=#; + end + else overflow(str_name_length,name_length) +@d make_font_name_end(#)== + append_to_name(#[l]); make_name +@d make_font_name(#)== + l_cur_name:=0; for l:=1 to # do make_font_name_end + +@ For files with character raster data (e.g., \.{GF} or \.{PK} files) the +the extension and\slash or area part will in most cases depend on the +resolution of the output device (corrected for font magnification). +If the special character |res_char| occurs in the extension and\slash or +default area, a character string representing the device resolution will +be substituted. +@^system dependencies@> + +@d res_char=='?' {character to be replaced by font resolution} +@d res_ASCII="?" {|xord[res_char]|} +@# +@d append_res_to_name(#)== + begin c:=#; + @!device if c=res_char then + for ll:=n_res_digits downto 1 do append_to_name(res_digits[ll]) + else ecived@;@/ + append_to_name(c); + end +@d make_font_res_end(#)== + append_res_to_name(#[l]); make_name +@d make_font_res(#)== + make_res; l_cur_name:=0; for l:=1 to # do make_font_res_end + +@ @<Glob...@>= +@!device +@!f_res:int_16u; {font resolution} +@!res_digits:array [1..5] of char; +@!n_res_digits:int_7; {number of significant characters in |res_digits|} +ecived + +@ The |make_res| procedure creates a sequence of characters representing +to the font resolution |f_res|. + +@p @!device procedure make_res; +var r:int_16u; +begin n_res_digits:=0; r:=f_res; +repeat incr(n_res_digits); + res_digits[n_res_digits]:=xchr["0"+(r mod 10)]; r:=r div 10; +until r=0; +end; +ecived + +@ The |make_name| procedure used to build the external file name. The +global variable |l_cur_name| contains the length of a default area +which has been copied to |cur_name| before |make_name| is called. +@^system dependencies@> + +@p procedure make_name(@!e:pckt_pointer); +var b:eight_bits; {a byte extracted from |byte_mem|} +@!n:pckt_pointer; {file name packet} +@!cur_loc,@!cur_limit:byte_pointer; {indices into |byte_mem|} +@!device +@!ll:int_15; {loop index} +ecived@;@/ +@!c:char; {a character to be appended to |cur_name|} +begin n:=font_name(cur_fnt); +cur_loc:=pckt_start[n]; cur_limit:=pckt_start[n+1]; +pckt_extract(b); {length of area part} +if b>0 then l_cur_name:=0; +while cur_loc<cur_limit do + begin pckt_extract(b); + if (b>="a")and(b<="z") then Decr(b)("a"-"A"); {convert to upper case} + append_to_name(xchr[b]); + end; +cur_loc:=pckt_start[e]; cur_limit:=pckt_start[e+1]; +while cur_loc<cur_limit do + begin pckt_extract(b); append_res_to_name(xchr[b]); + end; +while l_cur_name<name_length do + begin incr(l_cur_name); cur_name[l_cur_name]:=' '; + end; +end; + +@* Font data. +@ \.{DVI} file format does not include information about character widths, since +that would tend to make the files a lot longer. But a program that reads +a \.{DVI} file is supposed to know the widths of the characters that appear +in \\{set\_char} commands. Therefore \.{\title} looks at the font metric +(\.{TFM}) files for the fonts that are involved. +@.TFM {\rm files}@> +@.OFM {\rm files}@> + +The character-width data appears also in other files (e.g., in \.{VF} files +or in \.{GF} and \.{PK} files that specify bit patterns for digitized +characters); thus, it is usually possible for \.{DVI} reading programs +to get by with accessing only one file per font. For \.{VF} reading +programs there is, however, a problem: (1)~when reading the character +packets from a \.{VF} file the \.{TFM} width for its local fonts should +be known in order to analyze and optimize the packets (e.g., determine +if a packet must indeed be enclosed with |push| and |pop| as implied by +the \.{VF} format); and (2)~ in order to avoid infinite recursion such +programs must not try to read a \.{VF} file for a font before a +character from that font is actually used. Thus \.{\title} reads the +\.{TFM} file whenever a new font is encountered and delays the decision +whether this is a virtual font or not. + +@ First of all we need to know for each font~|f| such things as its +external name, design and scaled size, and the approximate size of +inter-word spaces. In addition we need to know the range |bc..ec| of +valid characters for this font, and for each character~|c| in~|f| we +need to know if this character exists and if so what is the width of~|c|. +Depending on the font type of~|f| we may want to know a few other things +about character~|c| in~|f| such as the character packet from a \.{VF} +file or the raster data from a \.{PK} file. +@^font types@> + +In \.{\title} we want to be able to handle the full range +|@t$-2^{31}$@><=c<@t$2^{31}$@>| of character codes; each character code +is decomposed into a character residue |0<=res<256| and character +extension |@t$-2^{23}$@><=ext<@t$2^{23}$@>| such that |c=256*ext+res|. +At present \.{VFtoVP}, \.{VPtoVF}, and the standard version of \TeX\ use +only characters in the range |0<=c<256| (i.e., |ext=0|), there are, +however, extensions of \TeX\ which use characters with |ext<>0|. +In any case characters with |ext<>0| will be used rather infrequently +and we want to handle this possibility without too much overhead. + +Some of the data for each character~|c| depend only on its residue: +first of all its width and escapement; others, such as \.{VF} packets or +raster data will also depend on its extension. The later will be stored +as packets in |byte_mem|, and the packets for characters with the same +residue but different extension will be chained. + +Thus we have to maintain several variables for each character +residue~|bc<=res<=ec| from each font~|f|; we store each type of variable +in a large array such that the array index |font_chars(f)+res| points to +the value for characters with residue |res| from font~|f|. + +Although \TeX\ was designed to be used with 256 characters, $\Omega$ +has no such restrictions. Therefore when \.{OVF} and \.{OFM} files +are being used, |ext| will remain 0 and |res| will vary over the full +range of values. + +@ Quite often a particular width value is shared by several characters in +a font or even by characters from different fonts; the later will +probably occur in particular for virtual fonts and the local fonts used +by them. Thus the array |widths| is used to store all different \.{TFM} +width values of all legal characters in all fonts; a variable of type +|width_pointer| is an index into |widths| or is zero if a characters does +not exist. + +In order to locate a given width value we use again a hash +table with simple chaining; this time the heads of the individual lists +appear in the |w_hash| array and the lists proceed through |w_link| +pointers. + +@<Types...@>= +@!width_pointer=0..max_widths; {an index into |widths|} + +@ @<Glob...@>= +@!widths:array[width_pointer] of int_32; {the different width values} +@!w_link:array[width_pointer] of width_pointer; {hash table} +@!w_hash:array[hash_code] of width_pointer; +@!n_widths:width_pointer; {first unoccupied position in |widths|} + +@ Initially the |widths| array and all the hash lists are empty, except +for one entry: the width value zero; in addition we set |widths[0]:=0|. + +@d invalid_width=0 {width pointer for invalid characters} +@d zero_width=1 {a width pointer to the value zero} + +@<Set init...@>= +w_hash[0]:=1; w_link[1]:=0; widths[0]:=0; widths[1]:=0; n_widths:=2; +for h:=1 to hash_size-1 do w_hash[h]:=0; + +@ The |make_width| function returns an index into |widths| and, if +necessary, adds a new width value; thus two characters will have the +same |width_pointer| if and only if their widths agree. + +@p function make_width(@!w:int_32):width_pointer; +label found; +var h:hash_code; {hash code} +@!p:width_pointer; {where the identifier is being sought} +@!x:int_16; {intermediate value} +begin widths[n_widths]:=w; +@<Compute the width hash code |h|@>; +@<Compute the width location |p|, |goto| found unless the value is new@>; +if n_widths=max_widths then overflow(str_widths,max_widths); +incr(n_widths); +found:make_width:=p; +end; + +@ A simple hash code is used: If the width value consists of the four +bytes $b_0b_1b_2b_3$, its hash value will be +$$(8*b_0+4*b_1+2*b_2+b_3)\,\bmod\,|hash_size|.$$ + +@<Compute the width hash...@>= +if w>=0 then x:=w div @"1000000 +else begin w:=w+@"40000000; w:=w+@"40000000; x:=(w div @"1000000)+@"80; + end; +w:=w mod @"1000000; x:=x+x+(w div @"10000); +w:=w mod @"10000; x:=x+x+(w div @"100); +h:=(x+x+(w mod @"100)) mod hash_size + +@ If the width is new, it has been placed into position |p=n_widths|, +otherwise |p| will point to its existing location. + +@<Compute the width location...@>= +p:=w_hash[h]; +while p<>0 do + begin if widths[p]=widths[n_widths] then goto found; + p:=w_link[p]; + end; +p:=n_widths; {the current width is new} +w_link[p]:=w_hash[h]; w_hash[h]:=p {insert |p| at beginning of hash list} + +@ The |char_widths| array is used to store the |width_pointer|s for all +different characters among all fonts. The |char_packets| array is used +to store the |pckt_pointer|s for all different characters among all +fonts; they can point to character packets from \.{VF} files or, e.g., +raster packets from \.{PK} files. + +@<Types...@>= +@!char_offset=neg_max_chars..max_chars; {|char_pointer| offset for a font} +@!char_pointer=0..max_chars; {index into |char_widths| or similar arrays} + +@ @<Glob...@>= +@!char_widths:array[char_pointer] of width_pointer; {width pointers} +@!char_packets:array[char_pointer] of pckt_pointer; {packet pointers} +@!n_chars:char_pointer; {first unused position in |char_widths|} + +@ @<Set init...@>= +n_chars:=0; + +@ The current number of known fonts is |nf|; each known font has an +internal number |f|, where |0<=f<nf|. For the moment we need for each +known font: |font_check|, |font_scaled|, |font_design|, |font_name|, +|font_bc|, |font_ec|, |font_chars|, and |font_type|. Here |font_scaled| +and |font_design| are measured in \.{DVI} units and |font_chars| is of +type |char_offset|: the width pointer for character~|c| of the font is +stored in |char_widths[char_offset+c]| (for |font_bc<=c<=font_ec|). +Later on we will need additional information depending on the font type: +\.{VF} or real (\.{GF}, \.{PK} or \.{PXL}). + +@<Types...@>= +@!f_type=defined_font..max_font_type; {type of a font} +@!font_number=0..max_fonts; + +@ @<Glob...@>= +@!nf:font_number; + +@ These data are stored in several arrays and we use \.{WEB} macros +to access the various fields. Thus it would be simple to store the +data in an array of record structures and adapt the \.{WEB} macros +accordingly. + +We will say, e.g., |font_name(f)| for the name field of font~|f|, and +|font_width(f)(c)| for the width pointer of character~|c| in font~|f| +and |font_packet(f)(c)| for its character packet (this character +exists provided |font_bc(f)<=c<=font_ec(f)| and +|font_width(f)(c)<>invalid_width|). The actual width of character~|c| in +font~|f| is stored in |widths[font_width(f)(c)]|. + +@d font_check(#)==fnt_check[#] {checksum} +@d font_scaled(#)==fnt_scaled[#] {scaled or `at' size} +@d font_design(#)==fnt_design[#] {design size} +@d font_name(#)==fnt_name[#] {area plus name packet} +@d font_bc(#)==fnt_bc[#] {first character} +@d font_ec(#)==fnt_ec[#] {last character} +@d font_chars(#)==fnt_chars[#] {character info offset} +@d font_type(#)==fnt_type[#] {type of this font} +@d font_font(#)==fnt_font[#] {use depends on |font_type|} +@# +@d font_width_end(#)==#] +@d font_width(#)==char_widths[font_chars(#)+font_width_end +@d font_packet(#)==char_packets[font_chars(#)+font_width_end +@d font_extend(#)==fnt_extended[#] + +@<Glob...@>= +@!fnt_check:array [font_number] of int_32; {checksum} +@!fnt_scaled:array [font_number] of int_31; {scaled size} +@!fnt_design:array [font_number] of int_31; {design size} +@!device @<Declare device dependent font data arrays@>@; @+ ecived @; @/ +@!fnt_name:array [font_number] of pckt_pointer; {pointer to area plus + name packet} +@!fnt_bc:array [font_number] of int_31; {first character} +@!fnt_ec:array [font_number] of int_31; {last character} +@!fnt_chars:array [font_number] of char_offset; {character info offset} +@!fnt_type:array [font_number] of f_type; {type of font} +@!fnt_font:array [font_number] of font_number; {use depends on |font_type|} +@!fnt_extended:array [font_number] of boolean; {\.{TFM} or \.{OFM} file} + +@ @d invalid_font==max_fonts {used when there is no valid font} + +@<Set init...@>= +@!device @<Initialize device dependent font data@>@; @+ ecived @;@/ +nf:=0; + +@ A \.{VF}, or \.{GF}, or \.{PK} file may contain information for +several characters with the same residue but with different extension; +all except the first of the corresponding packets in |byte_mem| will +contain a pointer to the previous one and |font_packet(f)(res)| +identifies the last such packet. + +A character packet in |byte_mem| starts with a flag byte +$$\hbox{|flag=@"40*ext_flag+@"20*chain_flag+type_flag|}$$ +with |0<=ext_flag<=3|, |0<=chain_flag<=1|, |0<=type_flag<=@"1F|, +followed by |ext_flag| bytes with the character extension for this +packet and, if |chain_flag=1|, by a two byte packet pointer to the +previous packet for the same font and character residue. The actual +character packet follows after these header bytes and the +interpretation of the |type_flag| depends on whether this is a \.{VF} +packet or a packet for raster data. + +The empty packet is interpreted as a special case of a packet with +|flag=0|. + +@d ext_flag=@"40 +@d chain_flag=@"20 + +@<Types...@>= +@!type_flag=0..chain_flag-1; {the range of values for the |type_flag|} + +@ The global variable |cur_fnt| is the internal font number of the +currently selected font, or equals |invalid_font| if no font has +been selected; |cur_res| and |cur_ext| are the residue and extension +part of the current character code. The type of a character packet +located by the |find_packet| function defined below is |cur_type|. +While building a character packet for a character, |pckt_ext| and +|pckt_res| are the extension and residue of this character; |pckt_dup| +indicates whether a packet for this extension exists already. + +@<Glob...@>= +@!cur_fnt:font_number; {the currently selected font} +@!cur_ext:int_24; {the current character extension} +@!cur_res:int_32; {the current character residue} +@!cur_type:type_flag; {type of the current character packet} +@!pckt_ext:int_24; {character extension for the current character packet} +@!pckt_res:int_32; {character residue for the current character packet} +@!pckt_dup:boolean; {is there a previous packet for the same extension?} +@!pckt_prev:pckt_pointer; {a previous packet for the same extension} +@!pckt_m_msg,@!pckt_s_msg,@!pckt_d_msg:int_7; {counts for various character + packet error messages} + +@ @<Set init...@>= +cur_fnt:=invalid_font; pckt_m_msg:=0; pckt_s_msg:=0; pckt_d_msg:=0; + +@ The |find_packet| functions is used to locate the character packet for +the character with residue~|cur_res| and extension~|cur_ext| from +font~|cur_fnt| and returns |false| if no packet exists for any extension; +otherwise the result is |true| and the global variables |cur_packet|, +|cur_type|, |cur_loc|, and |cur_limit| are initialized. In case none of +the character packets has the correct extension, the last one in the +chain (the one defined first) is used instead and |cur_ext| is changed +accordingly. + +@p function find_packet:boolean; +label found,exit; +var p,@!q:pckt_pointer; {current and next packet} +@!f:eight_bits; {a flag byte} +@!e:int_24; {extension for a packet} +begin @<Locate a character packet and |goto found| if found@>; +if font_packet(cur_fnt)(cur_res)=invalid_packet then + begin if pckt_m_msg<10 then {stop telling after first 10 times} + begin print_ln('---missing character packet for character ',cur_res:1, +@.missing character packet...@> + ' font ',cur_fnt:1); + incr(pckt_m_msg); mark_error; + if pckt_m_msg=10 then print_ln('---further messages suppressed.'); + end; + find_packet:=false; return; + end; +if pckt_s_msg<10 then {stop telling after first 10 times} + begin print_ln('---substituted character packet with extension ', +@.substituted character packet...@> + e:1,' instead of ',cur_ext:1,' for character ',cur_res:1, + ' font ',cur_fnt:1); + incr(pckt_s_msg); mark_error; + if pckt_s_msg=10 then print_ln('---further messages suppressed.'); + end; +cur_ext:=e; +found: cur_pckt:=p; cur_type:=f; find_packet:=true; +exit: end; + +@ @<Locate a character packet and |goto found| if found@>= +q:=font_packet(cur_fnt)(cur_res); +while q<>invalid_packet do + begin p:=q; q:=invalid_packet; + cur_loc:=pckt_start[p]; cur_limit:=pckt_start[p+1]; + if p=empty_packet then + begin e:=0; f:=0; + end + else begin pckt_extract(f); + case (f div ext_flag) of + 0: e:=0; + 1: e:=pckt_ubyte; + 2: e:=pckt_upair; + 3: e:=pckt_strio; + end; {there are no other cases} + if (f mod ext_flag)>=chain_flag then q:=pckt_upair; + f:=f mod chain_flag; + end; + if e=cur_ext then goto found; + end + +@ The |start_packet| procedure is used to create the header bytes of a +character packet for the character with residue~|cur_res| and +extension~|cur_ext| from font~|cur_fnt|; if a previous such packet +exists, we try to build an exact duplicate, i.e., use the chain field of +that previous packet. + +@p procedure start_packet(@!t:type_flag); +label found,not_found; +var p,@!q:pckt_pointer; {current and next packet} +@!f:int_8u; {a flag byte} +@!e:int_32; {extension for a packet} +@!cur_loc: byte_pointer; {current location in a packet} +@!cur_limit: byte_pointer; {start of next packet} +begin @<Locate a character packet and |goto found| if found@>; +q:=font_packet(cur_fnt)(cur_res); pckt_dup:=false; goto not_found; +found: pckt_dup:=true; pckt_prev:=p; +not_found: pckt_ext:=cur_ext; pckt_res:=cur_res; pckt_room(6); +@!debug if byte_ptr<>pckt_start[pckt_ptr] then confusion(str_packets); +gubed @;@/ +if q=invalid_packet then f:=t @+ else f:=t+chain_flag; +e:=cur_ext; +if e<0 then Incr(e)(@"1000000); +if e=0 then append_byte(f) @+ else @; + begin if e<@"100 then append_byte(f+ext_flag) @+ else @; + begin if e<@"10000 then append_byte(f+ext_flag+ext_flag) @+ else @; + begin append_byte(f+ext_flag+ext_flag+ext_flag); + append_byte(e div @"10000); e:=e mod @"10000; + end; + append_byte(e div @"100); e:=e mod @"100; + end; + append_byte(e); + end; +if q<>invalid_packet then + begin append_byte(q div @"100); append_byte(q mod @"100); + end; +end; + +@ The |build_packet| procedure is used to finish a character packet. +If a previous packet for the same character extension exists, the new +one is discarded; if the two packets are identical, as it occasionally +occurs for raster files, this is done without an error message. + +@p procedure build_packet; +var k,@!l:byte_pointer; {indices into |byte_mem|} +begin if pckt_dup then + begin k:=pckt_start[pckt_prev+1]; l:=pckt_start[pckt_ptr]; + if (byte_ptr-l)<>(k-pckt_start[pckt_prev]) then pckt_dup:=false; + while pckt_dup and(byte_ptr>l) do + begin flush_byte; decr(k); + if byte_mem[byte_ptr]<>byte_mem[k] then pckt_dup:=false; + end; + if (not pckt_dup)and(pckt_d_msg<10) then {stop telling after first 10 times} + begin print('---duplicate packet for character ',pckt_res:1); +@.duplicate packet for character...@> + if pckt_ext<>0 then print('.',pckt_ext:1); + print_ln(' font ',cur_fnt:1); + incr(pckt_d_msg); mark_error; + if pckt_d_msg=10 then print_ln('---further messages suppressed.'); + end; + byte_ptr:=l; + end +else font_packet(cur_fnt)(pckt_res):=make_packet; +end; + +@* Defining fonts. +A detailed description of the \.{TFM} file format can be found in the +documentation of \TeX, \MF, or \.{TFtoPL}. In order to read \.{TFM} +files the program uses the binary file variable |tfm_file|. + +@<Glob...@>= +@!tfm_file:byte_file; {a \.{TFM} file} +@!tfm_ext:pckt_pointer; {extension for \.{TFM} files} +@!ofm_ext:pckt_pointer; {extension for \.{OFM} files} + +@ @<Initialize predefined strings@>= +id4(".")("T")("F")("M")(tfm_ext); {file name extension for \.{TFM} files} +id4(".")("O")("F")("M")(ofm_ext); {file name extension for \.{OFM} files} + +@ If no font directory has been specified, \.{\title} is supposed to use +the default \.{TFM} directory, which is a system-dependent place where +the \.{TFM} files for standard fonts are kept. +The string variable |TFM_default_area| contains the name of this area. +@^system dependencies@> + +@d TFM_default_area_name=='TeXfonts:' {change this to the correct name} +@d OFM_default_area_name=='TeXfonts:' {change this to the correct name} +@d TFM_default_area_name_length=9 {change this to the correct length} +@d OFM_default_area_name_length=9 {change this to the correct length} + +@<Glob...@>= +@!TFM_default_area:packed array[1..TFM_default_area_name_length] of char; +@!OFM_default_area:packed array[1..OFM_default_area_name_length] of char; + +@ @<Set init...@>= +TFM_default_area:=TFM_default_area_name; +OFM_default_area:=OFM_default_area_name; + +@ If a \.{TFM} file is badly malformed, we say |bad_font|; for a \.{TFM} +file the |bad_tfm| procedure is used to give an error message which +refers the user to \.{TFtoPL} and \.{PLtoTF}, and terminates \.{\title}. + +@<Error handling...@>= +procedure bad_tfm; +begin print('Bad TFM or OFM file'); print_font(cur_fnt); print_ln('!'); +@.Bad TFM or OFM file@> +abort('Use OFM2OPL/OPL2OFM/TFtoPL/PLtoTF to diagnose and correct the problem'); +@.Use OFM2OPL/OPL2OFM/TFtoPL/PLtoTF@> +end; +@# +procedure bad_font; +begin new_line; +case font_type(cur_fnt) of + defined_font: confusion(str_fonts); + loaded_font: bad_tfm; + @<Cases for |bad_font|@>@;@/ + end; {there are no other cases} +end; + +@ To prepare |tfm_file| for input we |reset| it. + +@<TFM: Open |tfm_file|@>= +make_font_name(TFM_default_area_name_length)(TFM_default_area)(tfm_ext); +reset(tfm_file,cur_name); +if eof(tfm_file) then begin + make_font_name(OFM_default_area_name_length)(OFM_default_area)(ofm_ext); + reset(tfm_file,cur_name); + if eof(tfm_file) then +@^system dependencies@> + abort('---not loaded, TFM or OFM file can''t be opened!') + else font_extend(cur_fnt):=true +@.TFM or OFM file can\'t be opened@> + end +else font_extend(cur_fnt):=false + +@ It turns out to be convenient to read four bytes at a time, when we +are inputting from \.{TFM} files. The input goes into global variables +|tfm_b0|, |tfm_b1|, |tfm_b2|, and |tfm_b3|, with |tfm_b0| getting +the first byte and |tfm_b3| the fourth. + +@<Glob...@>= +@!tfm_b0,@!tfm_b1,@!tfm_b2,@!tfm_b3: eight_bits; {four bytes input at once} + +@ Reading a \.{TFM} file should be done as efficient as possible for a +particular system; on many systems this means that a large number of +bytes from |tfm_file| is read into a buffer and will then be extracted +from that buffer. In order to simplify such system dependent changes +we use the \.{WEB} macro |tfm_byte| to extract the next \.{TFM} or \.{OFM} +byte; this macro and |eof(tfm_file)| are used only in the |read_tfm_word| +procedure which sets |tfm_b0| through |tfm_b3| to the next four bytes +in the current \.{TFM} file. Here we give simple-minded definitions in +terms of standard \PASCAL. +@^system dependencies@> +@^optimization@> + +@d tfm_byte(#)==read(tfm_file,#) {read next \.{TFM} byte} + +@p procedure read_tfm_word; +begin tfm_byte(tfm_b0); tfm_byte(tfm_b1); +tfm_byte(tfm_b2); tfm_byte(tfm_b3); +if eof(tfm_file) then bad_font; +end; + +@ Here are three procedures used to check the consistency of font files: +First, the |check_check_sum| procedure compares two check sum values: a +warning is given if they differ and are both non-zero; if the second +value is not zero it may replace the first one. +Next, the |check_design_size| procedure compares two design size +values: a warning is given if they differ by more than a small amount. +Finally, the |check_width| function compares the character width value +for character |cur_res| read from a \.{VF} or raster file for font +|cur_fnt| with the value previously read from the \.{TFM} file and +returns the width pointer for that value; a warning is given if the two +values differ. + +@p procedure check_check_sum(@!c:int_32;@!u:boolean); + {compare |font_check(cur_fnt)| with |c|} +begin if (c<>font_check(cur_fnt))and(c<>0) then + begin + if font_check(cur_fnt)<>0 then + begin new_line; print_ln('---beware: check sums do not agree! (', +@.beware: check sums do not agree@> +@.check sums do not agree@> + c:1,' vs. ',font_check(cur_fnt):1,')'); + mark_harmless; + end; + if u then font_check(cur_fnt):=c; + end; +end; +@# +procedure check_design_size(@!d:int_32); + {compare |font_design(cur_fnt)| with |d|} +begin if abs(d-font_design(cur_fnt))>2 then + begin new_line; print_ln('---beware: design sizes do not agree! (', +@.beware: design sizes do not agree@> +@.design sizes do not agree@> + d:1,' vs. ',font_design(cur_fnt):1,')'); + mark_error; + end; +end; +@# +procedure print_hex(@!num:int_31); +var c:int_31; +begin print('"'); +c:=num div @"10000000; +if (c<10) then print(xchr[c+'0']) else print(xchr[c-10+'a']); +num:=num mod @"10000000; +c:=num div @"1000000; +if (c<10) then print(xchr[c+'0']) else print(xchr[c-10+'a']); +num:=num mod @"1000000; +c:=num div @"100000; +if (c<10) then print(xchr[c+'0']) else print(xchr[c-10+'a']); +num:=num mod @"100000; +c:=num div @"10000; +if (c<10) then print(xchr[c+'0']) else print(xchr[c-10+'a']); +num:=num mod @"10000; +c:=num div @"1000; +if (c<10) then print(xchr[c+'0']) else print(xchr[c-10+'a']); +num:=num mod @"1000; +c:=num div @"100; +if (c<10) then print(xchr[c+'0']) else print(xchr[c-10+'a']); +num:=num mod @"100; +c:=num div @"10; +if (c<10) then print(xchr[c+'0']) else print(xchr[c-10+'a']); +num:=num mod @"10; +c:=num; +if (c<10) then print(xchr[c+'0']) else print(xchr[c-10+'a']); +end; +@# +function check_width(w:int_32):width_pointer; + {compare |widths[font_width(cur_fnt)(cur_res)]| with |w|} +var wp:width_pointer; {pointer to \.{TFM} width value} +begin if (cur_res>=font_bc(cur_fnt))and(cur_res<=font_ec(cur_fnt)) then + wp:=font_width(cur_fnt)(cur_res) +else wp:=invalid_width; +if wp=invalid_width then + begin print_nl('Bad char ',cur_res:1); +@.Bad char c@> + if cur_ext<>0 then print('.',cur_ext:1); + print(' font ',cur_fnt:1); print_font(cur_fnt); + abort(' (compare TFM or OFM file)'); + end; +if w<>widths[wp] then + begin + print_hex(cur_ext); + print(' '); + print_hex(cur_res); + print(': char widths do not agree! ('); +@.beware: char widths do not agree@> +@.char widths do not agree@> + print_hex(w); + print(' vs. '); + print_hex(widths[wp]); + print_ln(')'); + mark_error; + end; +check_width:=wp; +end; + +@ The |load_font| procedure reads the \.{TFM} file for a font and puts +the data extracted into position |cur_fnt| of the font data arrays. + +@p procedure load_font; {reads a \.{TFM} file} +var l,j,lprime:int_32; {loop index} +@!p:char_pointer; {index into |char_widths|} +@!q:width_pointer; {index into |widths|} +@!bc,@!ec:int_31; {first and last character in this font} +@!lf:int_31; {length of file in four byte words} +@!lh:int_31; {length of header in four byte words} +@!nw:int_31; {number of words in width table} +@!w:int_32; {a four byte integer} +@!first_two:int_31; +@!ofm_level:int_32; +@!nco,@!extra_words:int_31; +@!tfm_width:int_31; +@<Variables for scaling computation@>@; +begin print('TFM: font ',cur_fnt:1); print_font(cur_fnt); +font_type(cur_fnt):=loaded_font; +@<TFM: Open |tfm_file|@>; +@<TFM: Read past the header data@>; +@<TFM: Store character-width indices@>; +@<TFM: Read and convert the width values@>; +@<TFM: Convert character-width indices to character-width pointers@>; +close_in(tfm_file); +@!device @<Initialize device dependent data for a font@>@; @+ ecived @; @/ +d_print(' loaded at ',font_scaled(cur_fnt):1,' DVI units'); +print_ln('.'); +end; + +@ @<Glob...@>= +@!tfm_conv:real; {\.{DVI} units per absolute \.{TFM} unit} + +@ We will use the following \.{WEB} macros to construct integers from +two or four of the four bytes read by |read_tfm_word|. +@^system dependencies@> + +@d tfm_b03(#)== {|tfm_b0..tfm_b3| as non-negative integer} +if tfm_b0>127 then bad_font +else #:=tfm_b0*@"1000000+tfm_b1*@"10000+tfm_b2*@"100+tfm_b3 + +@d tfm_b01(#)== {|tfm_b0..tfm_b1| as non-negative integer} +if tfm_b0>127 then bad_font +else #:=tfm_b0*256+tfm_b1 +@d tfm_b23(#)== {|tfm_b2..tfm_b3| as non-negative integer} +if tfm_b2>127 then bad_font +else #:=tfm_b2*256+tfm_b3 +@d tfm_squad(#)== {|tfm_b0..tfm_b3| as signed integer} +if tfm_b0<128 then #:=((tfm_b0*256+tfm_b1)*256+tfm_b2)*256+tfm_b3 +else #:=(((tfm_b0-256)*256+tfm_b1)*256+tfm_b2)*256+tfm_b3 +@d tfm_uquad== {|tfm_b0..tfm_b3| as unsigned integer} +(((tfm_b0*256+tfm_b1)*256+tfm_b2)*256+tfm_b3) + +@d read_tfm_width(#)==begin +read_tfm_word; +if first_two<>0 then tfm_width:=tfm_b0 +else begin + if # then read_tfm_word; + tfm_b01(tfm_width); + end +end + +@<TFM: Read past the header data@>= +read_tfm_word; tfm_b01(first_two); +if (first_two<>0) then begin + ofm_level:=-1; + tfm_b23(lh); + read_tfm_word; tfm_b01(bc); tfm_b23(ec); + if ec<bc then + begin bc:=1; ec:=0; + end + else if ec>255 then bad_font; + read_tfm_word; tfm_b01(nw); + if (nw=0)or(nw>256) then bad_font; + for l:=-2 to lh do + begin read_tfm_word; + if l=1 then + begin tfm_squad(w); check_check_sum(w,true); + end + else if l=2 then + begin if tfm_b0>127 then bad_font; + check_design_size(round(tfm_conv*tfm_uquad)); + end + end + end +else begin + tfm_b23(ofm_level); + read_tfm_word; tfm_b03(lf); + read_tfm_word; tfm_b03(lh); + read_tfm_word; tfm_b03(bc); + read_tfm_word; tfm_b03(ec); + if ec<bc then begin + bc:=1; ec:=0; + end + else if ec>65535 then bad_font; + read_tfm_word; tfm_b03(nw); + if (nw=0)or(nw>65536) then bad_font; + for l:=1 to 8 do + begin if eof(tfm_file) then bad_font; + read_tfm_word; + end; + if ofm_level=1 then begin + read_tfm_word; + nco:=(((tfm_b0*256+tfm_b1)*256+tfm_b2)*256+tfm_b3) div 2; + read_tfm_word; read_tfm_word; + extra_words:=(((tfm_b0*256+tfm_b1)*256+tfm_b2)*256+tfm_b3) div 2; + for l:=1 to 12 do + begin if eof(tfm_file) then bad_font; + read_tfm_word; + end; + end; + for l:=1 to lh do begin + read_tfm_word; + if l=1 then begin + tfm_squad(w); check_check_sum(w,true); + end + else if l=2 then begin + if tfm_b0>127 then bad_font; + check_design_size(round(tfm_conv*tfm_uquad)); + end + end; + if ofm_level>0 then + for l:=1 to (nco-29-lh) do + read_tfm_word; + end + +@ The width indices for the characters are stored in positions |n_chars| +through |n_chars-bc+ec| of the |char_widths| array; if characters on +either end of the range |bc..ec| do not exist, they are ignored and the +range is adjusted accordingly. + +@<TFM: Store character-width indices@>= +if ofm_level<=0 then begin + read_tfm_width(false); + while (tfm_width=0)and(bc<=ec) do + begin incr(bc); read_tfm_width(true); + end; + font_bc(cur_fnt):=bc; font_chars(cur_fnt):=n_chars-bc; + if ec>=max_chars-font_chars(cur_fnt) then overflow(str_chars,max_chars); + for l:=bc to ec do + begin char_widths[n_chars]:=tfm_width; incr(n_chars); read_tfm_width(true); + end; + while (char_widths[n_chars-1]=0)and(ec>=bc) do + begin decr(n_chars); decr(ec); + end; + font_ec(cur_fnt):=ec + end +else begin + font_bc(cur_fnt):=bc; font_chars(cur_fnt):=n_chars-bc; + if ec>=max_chars-font_chars(cur_fnt) then overflow(str_chars,max_chars); + font_ec(cur_fnt):=ec; + l:=bc; + while l<ec do begin + read_tfm_word; + tfm_width:=tfm_b0*256+tfm_b1; + char_widths[n_chars]:=tfm_width; incr(n_chars); + read_tfm_word; read_tfm_word; + lprime:=l+(tfm_b0*256+tfm_b1); + for j:=l+1 to lprime do begin + char_widths[n_chars]:=tfm_width; incr(n_chars); + end; + l:=lprime; + for j:=1 to extra_words do + read_tfm_word; + end; + read_tfm_word; + end + +@ The most important part of |load_font| is the width computation, which +involves multiplying the relative widths in the \.{TFM} file by the +scaling factor in the \.{DVI} file. A similar computation is used for +dimensions read from \.{VF} files. This fixed-point multiplication must +be done with precisely the same accuracy by all \.{DVI}-reading programs, +in order to validate the assumptions made by \.{DVI}-writing programs +like \TeX82. + +Let us therefore summarize what needs to be done. Each width in a \.{TFM} +file appears as a four-byte quantity called a |fix_word|. A |fix_word| +whose respective bytes are $(a,b,c,d)$ represents the number +$$x=\left\{\vcenter{\halign{$#$,\hfil\qquad&if $#$\hfil\cr +b\cdot2^{-4}+c\cdot2^{-12}+d\cdot2^{-20}&a=0;\cr +-16+b\cdot2^{-4}+c\cdot2^{-12}+d\cdot2^{-20}&a=255.\cr}}\right.$$ +(No other choices of $a$ are allowed, since the magnitude of a \.{TFM} +dimension must be less than 16.) We want to multiply this quantity by the +integer~|z|, which is known to be less than $2^{27}$. +If $|z|<2^{23}$, the individual multiplications $b\cdot z$, $c\cdot z$, +$d\cdot z$ cannot overflow; otherwise we will divide |z| by 2, 4, 8, or +16, to obtain a multiplier less than $2^{23}$, and we can compensate for +this later. If |z| has thereby been replaced by $|z|^\prime=|z|/2^e$, let +$\beta=2^{4-e}$; we shall compute +$$\lfloor(b+c\cdot2^{-8}+d\cdot2^{-16})\,z^\prime/\beta\rfloor$$ if $a=0$, +or the same quantity minus $\alpha=2^{4+e}z^\prime$ if $a=255$. +This calculation must be done exactly, for the reasons stated above; the +following program does the job in a system-independent way, assuming +that arithmetic is exact on numbers less than $2^{31}$ in magnitude. We +use \.{WEB} macros for various versions of this computation. +@^system dependencies@> +@^optimization@> + +@d tfm_fix3u== {convert |tfm_b1..tfm_b3| to an unsigned scaled dimension} +(((((tfm_b3*z)div@'400)+(tfm_b2*z))div@'400)+(tfm_b1*z))div beta +@# +@d tfm_fix4(#)== {convert |tfm_b0..tfm_b3| to a scaled dimension} + #:=tfm_fix3u; + if tfm_b0>0 then if tfm_b0=255 then Decr(#)(alpha) else bad_font +@d tfm_fix3(#)== {convert |tfm_b1..tfm_b3| to a scaled dimension} + #:=tfm_fix3u; @+ if tfm_b1>127 then Decr(#)(alpha) +@d tfm_fix2== {convert |tfm_b2..tfm_b3| to a scaled dimension} + if tfm_b2>127 then tfm_b1:=255 else tfm_b1:=0; + tfm_fix3 +@d tfm_fix1== {convert |tfm_b3| to a scaled dimension} + if tfm_b3>127 then tfm_b1:=255 else tfm_b1:=0; + tfm_b2:=tfm_b1; tfm_fix3 + +@<Variables for scaling computation@>= +@!z:int_32; {multiplier} +@!alpha:int_32; {correction for negative values} +@!beta:int_15; {divisor} + +@ @<Replace |z| by $|z|^\prime$ and compute $\alpha,\beta$@>= +alpha:=16; +while z>=@'40000000 do + begin z:=z div 2; alpha:=alpha+alpha; + end; +beta:=256 div alpha; alpha:=alpha*z + +@ The first width value, which indicates that a character does not exist +and which must vanish, is converted to |invalid_width|; the other width +values are scaled by |font_scaled(cur_fnt)| and converted to width +pointers by |make_width|. The resulting width pointers are stored +temporarily in the |char_widths| array, following the with indices. + +@<TFM: Read and convert the width values@>= +if nw-1>max_chars-n_chars then overflow(str_chars,max_chars); +if (tfm_b0<>0)or(tfm_b1<>0)or(tfm_b2<>0)or(tfm_b3<>0) then bad_font + else char_widths[n_chars]:=invalid_width; +z:=font_scaled(cur_fnt); +@<Replace |z|...@>; +for p:=n_chars+1 to n_chars+nw-1 do + begin read_tfm_word; tfm_fix4(w); + char_widths[p]:=make_width(w); + end + +@ We simply translate the width indices into width pointers. In addition +we initialize the character packets with the invalid packet. + +@<TFM: Convert character-width indices to character-width pointers@>= +for p:=font_chars(cur_fnt)+bc to n_chars-1 do + begin q:=char_widths[n_chars+char_widths[p]]; char_widths[p]:=q; + char_packets[p]:=invalid_packet; + end + +@ When processing a font definition we put the data extracted from the +\.{DVI} or \.{VF} file into position |nf| of the font data arrays and +call |define_font| to obtain the internal font number for this font. +The parameter |load| is true if the \.{TFM} file should be loaded. + +@p function define_font(@!load:boolean):font_number; +var save_fnt:font_number; {used to save |cur_fnt|} +begin save_fnt:=cur_fnt; {save} +cur_fnt:=0; +while (font_name(cur_fnt)<>font_name(nf))or@| + (font_scaled(cur_fnt)<>font_scaled(nf)) do incr(cur_fnt); +d_print(' => ',cur_fnt:1); print_font(cur_fnt); +if cur_fnt<nf then + begin check_check_sum(font_check(nf),true); + check_design_size(font_design(nf)); + @!debug if font_type(cur_fnt)=defined_font then print(' defined') + else print(' loaded'); + print(' previously'); + gubed@; + end +else begin if nf=max_fonts then overflow(str_fonts,max_fonts); + incr(nf); font_font(cur_fnt):=invalid_font; + font_type(cur_fnt):=defined_font; + d_print(' defined'); + end; +print_ln('.'); +if load and(font_type(cur_fnt)=defined_font) then load_font; +define_font:=cur_fnt; +cur_fnt:=save_fnt; {restore} +end; + +@* Low-level DVI input routines. +The program uses the binary file variable |dvi_file| for its main input +file; |dvi_loc| is the number of the byte about to be read next from +|dvi_file|. + +@<Glob...@>= +@!dvi_file:byte_file; {the stuff we are \.{\title}ing} +@!dvi_loc:int_32; {where we are about to look, in |dvi_file|} + +@ If the \.{DVI} file is badly malformed, we say |bad_dvi|; this +procedure gives an error message which refers the user to \.{DVItype}, +and terminates \.{\title}. + +@<Error handling...@>= +procedure bad_dvi; +begin new_line; print_ln('Bad DVI file: loc=',dvi_loc:1,'!'); +@.Bad DVI file@> +print(' Use DVItype with output level'); +@.Use DVItype@> +if random_reading then print('=4') @+ else print('<4'); +abort('to diagnose the problem'); +end; + +@ To prepare |dvi_file| for input, we |reset| it. + +@<Open input file(s)@>= +reset(dvi_file); {prepares to read packed bytes from |dvi_file|} +dvi_loc:=0; + +@ Reading the \.{DVI} file should be done as efficient as possible for a +particular system; on many systems this means that a large number of +bytes from |dvi_file| is read into a buffer and will then be extracted +from that buffer. In order to simplify such system dependent changes +we use a pair of \.{WEB} macros: |dvi_byte| extracts the next \.{DVI} +byte and |dvi_eof| is |true| if we have reached the end of the \.{DVI} +file. Here we give simple minded definitions for these macros in terms +of standard \PASCAL. +@^system dependencies@> +@^optimization@> + +@d dvi_eof == eof(dvi_file) {has the \.{DVI} file been exhausted?} +@d dvi_byte(#) == + if dvi_eof then bad_dvi + else read(dvi_file,#) {obtain next \.{DVI} byte} + +@ Next we come to the routines that are used only if |random_reading| is +|true|. The driver program below needs two such routines: |dvi_length| should +compute the total number of bytes in |dvi_file|, possibly also +causing |eof(dvi_file)| to be true; and |dvi_move(n)| should position +|dvi_file| so that the next |dvi_byte| will read byte |n|, starting with +|n=0| for the first byte in the file. +@^system dependencies@> + +Such routines are, of course, highly system dependent. They are implemented +here in terms of two assumed system routines called |set_pos| and |cur_pos|. +The call |set_pos(f,n)| moves to item |n| in file |f|, unless |n| is +negative or larger than the total number of items in |f|; in the latter +case, |set_pos(f,n)| moves to the end of file |f|. +The call |cur_pos(f)| gives the total number of items in |f|, if +|eof(f)| is true; we use |cur_pos| only in such a situation. + +@p function dvi_length:int_32; +begin set_pos(dvi_file,-1); dvi_length:=cur_pos(dvi_file); +end; +@# +procedure dvi_move(@!n:int_32); +begin set_pos(dvi_file,n); dvi_loc:=n; +end; + +@ We need seven simple functions to read the next byte or bytes +from |dvi_file|. + +@p function dvi_sbyte:int_8; {returns the next byte, signed} +@!begin_byte(dvi_byte); incr(dvi_loc); comp_sbyte(dvi_sbyte); +end; +@# +function dvi_ubyte:int_8u; {returns the next byte, unsigned} +@!begin_byte(dvi_byte); incr(dvi_loc); comp_ubyte(dvi_ubyte); +end; +@# +function dvi_spair:int_16; {returns the next two bytes, signed} +@!begin_pair(dvi_byte); Incr(dvi_loc)(2); comp_spair(dvi_spair); +end; +@# +function dvi_upair:int_16u; {returns the next two bytes, unsigned} +@!begin_pair(dvi_byte); Incr(dvi_loc)(2); comp_upair(dvi_upair); +end; +@# +function dvi_strio:int_24; {returns the next three bytes, signed} +@!begin_trio(dvi_byte); Incr(dvi_loc)(3); comp_strio(dvi_strio); +end; +@# +function dvi_utrio:int_24u; {returns the next three bytes, unsigned} +@!begin_trio(dvi_byte); Incr(dvi_loc)(3); comp_utrio(dvi_utrio); +end; +@# +function dvi_squad:int_32; {returns the next four bytes, signed} +@!begin_quad(dvi_byte); Incr(dvi_loc)(4); comp_squad(dvi_squad); +end; + +@ Three other functions are used in cases where a four byte integer +(which is always signed) must have a non-negative value, a positive +value, or is a pointer which must be either positive or |=-1|. + +@p function dvi_uquad:int_31; {result must be non-negative} +var x:int_32; +begin x:=dvi_squad; if x<0 then bad_dvi +else dvi_uquad:=x; +end; +@# +function dvi_pquad:int_31; {result must be positive} +var x:int_32; +begin x:=dvi_squad; if x<=0 then bad_dvi +else dvi_pquad:=x; +end; +@# +function dvi_pointer:int_32; {result must be positive or |=-1|} +var x:int_32; +begin x:=dvi_squad; if (x<=0)and(x<>-1) then bad_dvi +else dvi_pointer:=x; +end; + +@ Given the structure of the \.{DVI} commands it is fairly obvious +that their interpretation consists of two steps: First zero to four +bytes are read in order to obtain the value of the first parameter +(e.g., zero bytes for |set_char_0|, four bytes for |set4|); then, +depending on the command class, a specific action is performed (e.g., +typeset a character but don't move the reference point for |put1..put4|). + +The \.{DVItype} program uses large case statements for both steps; +unfortunately some \PASCAL\ compilers fail to implement large case +statements efficiently -- in particular those as the one used in the +|first_par| function of \.{DVItype}. Here we use a pair of look up tables: +|dvi_par| determines how to obtain the value of the first parameter, and +|dvi_cl| determines the command class. + +A slight complication arises from the fact that we want to decompose the +character code of each character to be typeset into a residue +|0<=char_res<256| and extension: |char_code=char_res+256*char_ext|; +the \.{TFM} widths as well as the pixel widths for a given resolution +are the same for all characters in a font with the same residue. +For \.{OFM} files, |char_res| can have any value and |char_ext=0|. + +@d two_cases(#)==#,#+1 +@d three_cases(#)==#,#+1,#+2 +@d five_cases(#)==#,#+1,#+2,#+3,#+4 + +@ First we define the values used as array elements of |dvi_par|; we +distinguish between pure numbers and dimensions because dimensions read +from a \.{VF} file must be scaled. + +@d char_par=0 {character for \\{set} and |put|} +@d no_par=1 {no parameter} +@d dim1_par=2 {one-byte signed dimension} +@d num1_par=3 {one-byte unsigned number} +@d dim2_par=4 {two-byte signed dimension} +@d num2_par=5 {two-byte unsigned number} +@d dim3_par=6 {three-byte signed dimension} +@d num3_par=7 {three-byte unsigned number} +@d dim4_par=8 {four-byte signed dimension} +@d num4_par=9 {four-byte signed number} +@d numu_par=10 {four-byte non-negative number} +@d rule_par=11 {dimensions for |set_rule| and |put_rule|} +@d fnt_par=12 {font for |fnt_num| commands} +@d max_par=12 {largest possible value} + +@<Types...@>= +@!cmd_par=char_par..max_par; + +@ Here we declare the array |dvi_par|. + +@<Globals...@>= +@!dvi_par:packed array [eight_bits] of cmd_par; + +@ And here we initialize it. + +@<Set init...@>= +for i:=0 to put1+3 do dvi_par[i]:=char_par;@/ +for i:=nop to 255 do dvi_par[i]:=no_par;@/ +dvi_par[set_rule]:=rule_par; dvi_par[put_rule]:=rule_par;@/ +dvi_par[right1]:=dim1_par; dvi_par[right1+1]:=dim2_par; +dvi_par[right1+2]:=dim3_par; dvi_par[right1+3]:=dim4_par;@/ +for i:=fnt_num_0 to fnt_num_0+63 do dvi_par[i]:=fnt_par;@/ +dvi_par[fnt1]:=num1_par; dvi_par[fnt1+1]:=num2_par; +dvi_par[fnt1+2]:=num3_par; dvi_par[fnt1+3]:=num4_par;@/ +dvi_par[xxx1]:=num1_par; dvi_par[xxx1+1]:=num2_par; +dvi_par[xxx1+2]:=num3_par; dvi_par[xxx1+3]:=numu_par;@/ +for i:=0 to 3 do + begin dvi_par[i+w1]:=dvi_par[i+right1]; + dvi_par[i+x1]:=dvi_par[i+right1]; + dvi_par[i+down1]:=dvi_par[i+right1]; + dvi_par[i+y1]:=dvi_par[i+right1]; + dvi_par[i+z1]:=dvi_par[i+right1]; + dvi_par[i+fnt_def1]:=dvi_par[i+fnt1]; + end; + +@ Next we define the values used as array elements of |dvi_cl|; +several \.{DVI} commands (e.g., |nop|, |bop|, |eop|, |pre|, |post|) will +always be treated separately and are therfore assigned to the invalid +class here. + +@d char_cl=0 +@d rule_cl=char_cl+1 +@d xxx_cl=char_cl+2 +@d push_cl=3 +@d pop_cl=4 +@d w0_cl=5 +@d x0_cl=w0_cl+1 +@d right_cl=w0_cl+2 +@d w_cl=w0_cl+3 +@d x_cl=w0_cl+4 +@d y0_cl=10 +@d z0_cl=y0_cl+1 +@d down_cl=y0_cl+2 +@d y_cl=y0_cl+3 +@d z_cl=y0_cl+4 +@d fnt_cl=15 +@d fnt_def_cl=16 +@d invalid_cl=17 +@d max_cl=invalid_cl {largest possible value} + +@<Types...@>= +@!cmd_cl=char_cl..max_cl; + +@ Here we declare the array |dvi_cl|. + +@<Globals...@>= +@!dvi_cl:packed array [eight_bits] of cmd_cl; + +@ And here we initialize it. + +@<Set init...@>= +for i:=set_char_0 to put1+3 do dvi_cl[i]:=char_cl; +dvi_cl[set_rule]:=rule_cl; dvi_cl[put_rule]:=rule_cl;@/ +dvi_cl[nop]:=invalid_cl; +dvi_cl[bop]:=invalid_cl; dvi_cl[eop]:=invalid_cl;@/ +dvi_cl[push]:=push_cl; dvi_cl[pop]:=pop_cl;@/ +dvi_cl[w0]:=w0_cl; dvi_cl[x0]:=x0_cl;@/ +dvi_cl[y0]:=y0_cl; dvi_cl[z0]:=z0_cl;@/ +for i:=0 to 3 do + begin dvi_cl[i+right1]:=right_cl; + dvi_cl[i+w1]:=w_cl; + dvi_cl[i+x1]:=x_cl;@/ + dvi_cl[i+down1]:=down_cl; + dvi_cl[i+y1]:=y_cl; + dvi_cl[i+z1]:=z_cl;@/ + dvi_cl[i+xxx1]:=xxx_cl; + dvi_cl[i+fnt_def1]:=fnt_def_cl; + end; +for i:=fnt_num_0 to fnt1+3 do dvi_cl[i]:=fnt_cl; +for i:=pre to 255 do dvi_cl[i]:=invalid_cl; + +@ A few small arrays are used to generate \.{DVI} commands. + +@<Glob...@>= +@!dvi_char_cmd:array[boolean] of eight_bits; {|put1| and |set1|} +@!dvi_rule_cmd:array[boolean] of eight_bits; {|put_rule| and |set_rule|} +@!dvi_right_cmd:array[right_cl..x_cl] of eight_bits; {|right1|, |w1|, and |x1|} +@!dvi_down_cmd:array[down_cl..z_cl] of eight_bits; {|down1|, |y1|, and |z1|} + +@ @<Set init...@>= +dvi_char_cmd[false]:=put1; +dvi_char_cmd[true]:=set1;@/ +dvi_rule_cmd[false]:=put_rule; +dvi_rule_cmd[true]:=set_rule;@/ +dvi_right_cmd[right_cl]:=right1; +dvi_right_cmd[w_cl]:=w1; +dvi_right_cmd[x_cl]:=x1;@/ +dvi_down_cmd[down_cl]:=down1; +dvi_down_cmd[y_cl]:=y1; +dvi_down_cmd[z_cl]:=z1; + +@ The global variables |cur_cmd|, |cur_parm| and |cur_class| are used +for the current \.{DVI} command, its first parameter (if any), and its +command class respectively. + +@<Glob...@>= +@!cur_cmd:eight_bits; {current \.{DVI} command byte} +@!cur_parm:int_32; {its first parameter (if any)} +@!cur_class:cmd_cl; {its class} + +@ When typesetting a character or rule, the boolean variable |cur_upd| +is |true| for \\{set} commands, |false| for |put| commands. + +@<Glob...@>= +@!cur_cp:char_pointer; {|char_widths| index for the current character} +@!cur_wp:width_pointer; {width pointer of the current character} +@!cur_upd:boolean; {is this a \\{set} or |set_rule| command ?} +@!cur_v_dimen:int_32; {a vertical dimension} +@!cur_h_dimen:int_32; {a horizontal dimension} + +@ @<Set init...@>= +cur_cp:=0; cur_wp:=invalid_width; {so they can be saved and restored!} + +@ The |dvi_first_par| procedure first reads \.{DVI} command bytes into +|cur_cmd| until |cur_cmd<>nop|; then |cur_parm| is set to the value of +the first parameter (if any) and |cur_class| to the command class. + +@d set_cur_char(#)== {set up |cur_res|, |cur_ext|, and |cur_upd|} +begin cur_ext:=0; +if cur_cmd<set1 then + begin cur_res:=cur_cmd; cur_upd:=true + end +else begin cur_res:=#; cur_upd:=(cur_cmd<put1); + Decr(cur_cmd)(dvi_char_cmd[cur_upd]); + if font_extend(cur_fnt) then + begin + cur_ext:=0; + while cur_cmd>0 do + begin + cur_res:=cur_res*256+#; decr(cur_cmd); + end + end + else + while cur_cmd>0 do + begin if cur_cmd=3 then if cur_res>127 then cur_ext:=-1; + cur_ext:=cur_ext*256+cur_res; cur_res:=#; decr(cur_cmd); + end; + end; +end + +@p procedure dvi_first_par; +begin repeat cur_cmd:=dvi_ubyte; +until cur_cmd<>nop; {skip over |nop|s} +case dvi_par[cur_cmd] of +char_par: set_cur_char(dvi_ubyte); +no_par: do_nothing; +dim1_par: cur_parm:=dvi_sbyte; +num1_par: cur_parm:=dvi_ubyte; +dim2_par: cur_parm:=dvi_spair; +num2_par: cur_parm:=dvi_upair; +dim3_par: cur_parm:=dvi_strio; +num3_par: cur_parm:=dvi_utrio; +two_cases(dim4_par): cur_parm:=dvi_squad; {|dim4_par| and |num4_par|} +numu_par: cur_parm:=dvi_uquad; +rule_par: + begin cur_v_dimen:=dvi_squad; cur_h_dimen:=dvi_squad; + cur_upd:=(cur_cmd=set_rule); + end; +fnt_par:cur_parm:=cur_cmd-fnt_num_0; +end; {there are no other cases} +cur_class:=dvi_cl[cur_cmd]; +end; + +@ The global variable |dvi_nf| is used for the number of different +\.{DVI} fonts defined so far; their external font numbers (as extracted +from the \.{DVI} file) are stored in the array |dvi_e_fnts|, the +corresponding internal font numbers used internally by \.{\title} are +stored in the array |dvi_i_fnts|. + +@<Glob...@>= +@!dvi_e_fnts:array[font_number] of int_32; {external font numbers} +@!dvi_i_fnts:array[font_number] of font_number; {corresponding + internal font numbers} +@!dvi_nf:font_number; {number of \.{DVI} fonts defined so far} + +@ @<Set ini...@>= +dvi_nf:=0; + +@ The |dvi_font| procedure sets |cur_fnt| to the internal font number +corresponding to the external font number |cur_parm| (or aborts the +program if such a font was never defined). + +@p procedure dvi_font; {computes |cur_fnt| corresponding to |cur_parm|} +var f:font_number; {where the font is sought} +begin @<DVI: Locate font |cur_parm|@>; +if f=dvi_nf then bad_dvi; +cur_fnt:=dvi_i_fnts[f]; +if font_type(cur_fnt)=defined_font then load_font; +end; + +@ @<DVI: Locate font |cur_parm|@>= +f:=0; dvi_e_fnts[dvi_nf]:=cur_parm; +while cur_parm<>dvi_e_fnts[f] do incr(f) + +@ Finally the |dvi_do_font| procedure is called when one of the command +|fnt_def1..fnt_def4| and its first parameter have been read from the +\.{DVI} file; the argument indicates whether this should be the second +definition of the font (|true|) or not (|false|). + +@p procedure dvi_do_font(@!second:boolean); +var f:font_number; {where the font is sought} +@!k:int_15; {general purpose variable} +begin print('DVI: font ',cur_parm:1); +@<DVI: Locate font |cur_parm|@>; +if (f=dvi_nf)=second then bad_dvi; +font_check(nf):=dvi_squad; +font_scaled(nf):=dvi_pquad; +font_design(nf):=dvi_pquad; +k:=dvi_ubyte; pckt_room(1); append_byte(k); +Incr(k)(dvi_ubyte); pckt_room(k); +while k>0 do begin append_byte(dvi_ubyte); decr(k); + end; +font_name(nf):=make_packet; {the font area plus name} +dvi_i_fnts[dvi_nf]:=define_font(false); +if not second then + begin if dvi_nf=max_fonts then overflow(str_fonts,max_fonts); + incr(dvi_nf); + end +else if dvi_i_fnts[f]<>dvi_i_fnts[dvi_nf] then bad_dvi; +end; + +@* Low-level VF input routines. +A detailed description of the \.{VF} file format can be found in +the documentation of \.{VFtoVP}; here we just define symbolic names for +some of the \.{VF} command bytes. + +@d long_char=242 {\.{VF} command for general character packet} +@# +@d vf_id=202 {identifies \.{VF} files} + +@ The program uses the binary file variable |vf_file| for input from +\.{VF} files; |vf_loc| is the number of the byte about to be read next +from |vf_file|. + +@<Glob...@>= +@!vf_file:byte_file; {a \.{VF} file} +@!vf_loc:int_32; {where we are about to look, in |vf_file|} +@!vf_limit:int_32; {value of |vf_loc| at end of a character packet} +@!vf_ext:pckt_pointer; {extension for \.{VF} files} +@!ovf_ext:pckt_pointer; {extension for \.{OVF} files} +@!vf_cur_fnt:font_number; {current font number in a \.{VF} file} + +@ @<Initialize predefined strings@>= +id3(".")("V")("F")(vf_ext); {file name extension for \.{VF} files} +id4(".")("O")("V")("F")(ovf_ext); {file name extension for \.{OVF} files} + +@ If a \.{VF} file is badly malformed, we say |bad_font|; this procedure +gives an error message which refers the user to \.{VFtoVP} and +\.{OVPtoOVF}, and terminates \.{\title}. + +@<Cases for |bad_font|@>= +vf_font_type: begin print('Bad (O)VF file'); print_font(cur_fnt); +@.Bad (O)VF file@> + print_ln(' loc=',vf_loc:1); + abort( + 'Use OVF2OVP/OVP2OVF/VFtoVP/VPtoVF to diagnose and correct the problem'); +@.Use OVF2OVP/OVP2OVF/VFtoVP/VPtoVF@> + end; + +@ If no font directory has been specified, \.{\title} is supposed to use +the default \.{VF} directory, which is a system-dependent place where +the \.{VF} files for standard fonts are kept. +The string variable |VF_default_area| contains the name of this area. +@^system dependencies@> + +@d VF_default_area_name=='TeXvfonts:' {change this to the correct name} +@d VF_default_area_name_length=10 {change this to the correct length} +@d OVF_default_area_name=='TeXvfonts:' {change this to the correct name} +@d OVF_default_area_name_length=10 {change this to the correct length} + +@<Glob...@>= +@!VF_default_area:packed array[1..VF_default_area_name_length] of char; +@!OVF_default_area:packed array[1..OVF_default_area_name_length] of char; + +@ @<Set init...@>= +VF_default_area:=VF_default_area_name; +OVF_default_area:=OVF_default_area_name; + +@ To prepare |vf_file| for input we |reset| it. + +@<VF: Open |vf_file| or |goto not_found|@>= +make_font_name(VF_default_area_name_length)(VF_default_area)(vf_ext); +reset(vf_file,cur_name); +if eof(vf_file) then begin + make_font_name(OVF_default_area_name_length)(OVF_default_area)(ovf_ext); + reset(vf_file,cur_name); + if eof(vf_file) then +@^system dependencies@> + goto not_found + end; +vf_loc:=0 + +@ Reading a \.{VF} file should be done as efficient as possible for a +particular system; on many systems this means that a large number of +bytes from |vf_file| is read into a buffer and will then be extracted +from that buffer. In order to simplify such system dependent changes +we use a pair of \.{WEB} macros: |vf_byte| extracts the next \.{VF} +byte and |vf_eof| is |true| if we have reached the end of the \.{VF} +file. Here we give simple minded definitions for these macros in terms +of standard \PASCAL. +@^system dependencies@> +@^optimization@> + +@d vf_eof == eof(vf_file) {has the \.{VF} file been exhausted?} +@d vf_byte(#) == + if vf_eof then bad_font + else read(vf_file,#) {obtain next \.{VF} byte} + +@ We need several simple functions to read the next byte or bytes +from |vf_file|. + +@p function vf_ubyte:int_8u; {returns the next byte, unsigned} +@!begin_byte(vf_byte); incr(vf_loc); comp_ubyte(vf_ubyte); +end; +@# +function vf_upair:int_16u; {returns the next two bytes, unsigned} +@!begin_pair(vf_byte); Incr(vf_loc)(2); comp_upair(vf_upair); +end; +@# +function vf_strio:int_24; {returns the next three bytes, signed} +@!begin_trio(vf_byte); Incr(vf_loc)(3); comp_strio(vf_strio); +end; +@# +function vf_utrio:int_24u; {returns the next three bytes, unsigned} +@!begin_trio(vf_byte); Incr(vf_loc)(3); comp_utrio(vf_utrio); +end; +@# +function vf_squad:int_32; {returns the next four bytes, signed} +@!begin_quad(vf_byte); Incr(vf_loc)(4); comp_squad(vf_squad); +end; + +@ All dimensions in a \.{VF} file, except the design sizes of a virtual +font and its local fonts, are |fix_word|s that must be scaled in exactly +the same way as the character widths from a \.{TFM} file; we can use the +same code, but this time |z|, |alpha|, and |beta| are global variables. + +@<Glob...@>= +@<Variables for scaling computation@>@; + +@ We need five functions to read the next byte or bytes and convert a +|fix_word| to a scaled dimension. + +@p function vf_fix1:int_32; {returns the next byte as scaled value} +var x:int_32; {accumulator} +begin vf_byte(tfm_b3); incr(vf_loc); +tfm_fix1(x); vf_fix1:=x; +end; +@# +function vf_fix2:int_32; {returns the next two bytes as scaled value} +var x:int_32; {accumulator} +begin vf_byte(tfm_b2); vf_byte(tfm_b3); Incr(vf_loc)(2); +tfm_fix2(x); vf_fix2:=x; +end; +@# +function vf_fix3:int_32; {returns the next three bytes as scaled value} +var x:int_32; {accumulator} +begin vf_byte(tfm_b1); vf_byte(tfm_b2); vf_byte(tfm_b3); +Incr(vf_loc)(3);@/ +tfm_fix3(x); vf_fix3:=x; +end; +@# +function vf_fix3u:int_32; {returns the next three bytes as scaled value} +begin vf_byte(tfm_b1); vf_byte(tfm_b2); vf_byte(tfm_b3); +Incr(vf_loc)(3);@/ +vf_fix3u:=tfm_fix3u; +end; +@# +function vf_fix4:int_32; {returns the next four bytes as scaled value} +var x:int_32; {accumulator} +begin vf_byte(tfm_b0); vf_byte(tfm_b1); vf_byte(tfm_b2); vf_byte(tfm_b3); +Incr(vf_loc)(4);@/ +tfm_fix4(x); vf_fix4:=x; +end; + +@ Three other functions are used in cases where the result must have a +non-negative value or a positive value. + +@p function vf_uquad:int_31; {result must be non-negative} +var x:int_32; +begin x:=vf_squad; if x<0 then bad_font @+ else vf_uquad:=x; +end; +@# +function vf_pquad:int_31; {result must be positive} +var x:int_32; +begin x:=vf_squad; if x<=0 then bad_font @+ else vf_pquad:=x; +end; +@# +function vf_fixp:int_31; {result must be positive} +var x:int_32; {accumulator} +begin vf_byte(tfm_b0); vf_byte(tfm_b1); vf_byte(tfm_b2); vf_byte(tfm_b3); +Incr(vf_loc)(4);@/ +if tfm_b0>0 then bad_font; +vf_fixp:=tfm_fix3u; +end; + +@ The |vf_first_par| procedure first reads a \.{VF} command byte into +|cur_cmd|; then |cur_parm| is set to the value of the first parameter +(if any) and |cur_class| to the command class. + +@d set_cur_wp_end(#)== if cur_wp=invalid_width then # +@d set_cur_wp(#)== {set |cur_wp| to the char's width pointer} +cur_wp:=invalid_width; +if #<>invalid_font then + if (cur_res>=font_bc(#))and(cur_res<=font_ec(#)) then + begin cur_cp:=font_chars(#)+cur_res; cur_wp:=char_widths[cur_cp]; + end; +set_cur_wp_end + +@p procedure vf_first_par; +begin cur_cmd:=vf_ubyte; +case dvi_par[cur_cmd] of +char_par: + begin set_cur_char(vf_ubyte); set_cur_wp(vf_cur_fnt)(bad_font); + end; +no_par: do_nothing; +dim1_par: cur_parm:=vf_fix1; +num1_par: cur_parm:=vf_ubyte; +dim2_par: cur_parm:=vf_fix2; +num2_par: cur_parm:=vf_upair; +dim3_par: cur_parm:=vf_fix3; +num3_par: cur_parm:=vf_utrio; +dim4_par: cur_parm:=vf_fix4; +num4_par: cur_parm:=vf_squad; +numu_par: cur_parm:=vf_uquad; +rule_par: + begin cur_v_dimen:=vf_fix4; cur_h_dimen:=vf_fix4; + cur_upd:=(cur_cmd=set_rule); + end; +fnt_par:cur_parm:=cur_cmd-fnt_num_0; +end; {there are no other cases} +cur_class:=dvi_cl[cur_cmd]; +end; + +@ For a virtual font we set |font_type(f):=vf_font_type|; in this case +|font_font(f)| is the default font for character packets from virtual +font~|f|. +@^font types@> + +The global variable |vf_nf| is used for the number of different local +fonts defined in a \.{VF} file so far; their external font numbers +(as extracted from the \.{VF} file) are stored in the array |vf_e_fnts|, +the corresponding internal font numbers used internally by \.{\title} are +stored in the array |vf_i_fnts|. + +@<Glob...@>= +@!vf_e_fnts:array[font_number] of int_32; {external font numbers} +@!vf_i_fnts:array[font_number] of font_number; {corresponding + internal font numbers} +@!vf_nf:font_number; {number of local fonts defined so far} +@!lcl_nf:font_number; {largest |vf_nf| value for any \.{VF} file} + +@ @<Set init...@>= +lcl_nf:=0; + +@ The |vf_font| procedure sets |vf_cur_fnt| to the internal font number +corresponding to the external font number |cur_parm| (or aborts the +program if such a font was never defined). + +@p procedure vf_font; {computes |vf_cur_fnt| corresponding to |cur_parm|} +var f:font_number; {where the font is sought} +begin @<VF: Locate font |cur_parm|@>; +if f=vf_nf then bad_font; +vf_cur_fnt:=vf_i_fnts[f]; +end; + +@ @<VF: Locate font |cur_parm|@>= +f:=0; vf_e_fnts[vf_nf]:=cur_parm; +while cur_parm<>vf_e_fnts[f] do incr(f) + +@ Finally the |vf_do_font| procedure is called when one of the command +|fnt_def1..fnt_def4| and its first parameter have been read from the +\.{VF} file. + +@p procedure vf_do_font; +var f:font_number; {where the font is sought} +@!k:int_31; {general purpose variable} +begin +print('VF: font ',cur_parm:1);@/ +@<VF: Locate font |cur_parm|@>; +if f<>vf_nf then bad_font; +font_check(nf):=vf_squad; +font_scaled(nf):=vf_fixp; +font_design(nf):=round(tfm_conv*vf_pquad); +k:=vf_ubyte; pckt_room(1); append_byte(k); +Incr(k)(vf_ubyte); pckt_room(k); +while k>0 do begin append_byte(vf_ubyte); decr(k); + end; +font_name(nf):=make_packet; {the font area plus name} +vf_i_fnts[vf_nf]:=define_font(true); +if vf_nf=lcl_nf then + if lcl_nf=max_fonts then overflow(str_fonts,max_fonts) + else incr(lcl_nf); +incr(vf_nf); +end; + +@* Reading VF and OVF files. +The |do_vf| function attempts to read the \.{VF} file for a font and +returns |false| if the \.{VF} file could not be found; otherwise the +font type is changed to |vf_font_type|. + +@p function do_vf:boolean; {read a \.{VF} file} +label reswitch,done,not_found,exit; +var temp_int:int_32; {integer for temporary variables} +@!temp_byte:int_8u; {byte for temporary variables} +@!k:byte_pointer; {index into |byte_mem|} +@!l:int_15; {general purpose variable} +@!save_ext:int_24; {used to save |cur_ext|} +@!save_res:int_32; {used to save |cur_res|} +@!save_cp:width_pointer; {used to save |cur_cp|} +@!save_wp:width_pointer; {used to save |cur_wp|} +@!save_upd:boolean; {used to save |cur_upd|} +@!vf_wp:width_pointer; {width pointer for the current character packet} +@!vf_fnt:font_number; {current font in the current character packet} +@!move_zero:boolean; {|true| if rule 1 is used} +@!last_pop:boolean; {|true| if final |pop| has been manufactured} +begin @<VF: Open |vf_file| or |goto not_found|@>; +save_ext:=cur_ext; save_res:=cur_res; save_cp:=cur_cp; save_wp:=cur_wp; +save_upd:=cur_upd; {save} +font_type(cur_fnt):=vf_font_type;@/ +@<VF: Process the preamble@>;@/ +@<VF: Process the font definitions@>;@/ +while cur_cmd<=long_char do @<VF: Build a character packet@>; +if cur_cmd<>post then bad_font; +@!debug print('VF file for font ',cur_fnt:1); print_font(cur_fnt); +print_ln(' loaded.'); +gubed @;@/ +close_in(vf_file); +cur_ext:=save_ext; cur_res:=save_res; cur_cp:=save_cp; cur_wp:=save_wp; +cur_upd:=save_upd; {restore} +do_vf:=true; return; +not_found:do_vf:=false; +exit:end; + +@ @<VF: Process the preamble@>= +if vf_ubyte<>pre then bad_font; +if vf_ubyte<>vf_id then bad_font; +temp_byte:=vf_ubyte; pckt_room(temp_byte); +for l:=1 to temp_byte do append_byte(vf_ubyte); +if font_extend(cur_fnt) then print('O'); +print('VF file: '''); print_packet(new_packet); print(''','); +flush_packet;@/ +check_check_sum(vf_squad,false); +check_design_size(round(tfm_conv*vf_pquad));@/ +z:=font_scaled(cur_fnt); +@<Replace |z|...@>;@/ +print_nl(' for font ',cur_fnt:1); print_font(cur_fnt); print_ln('.') + +@ @<VF: Process the font definitions@>= +vf_i_fnts[0]:=invalid_font; vf_nf:=0;@/ +cur_cmd:=vf_ubyte; +while (cur_cmd>=fnt_def1)and(cur_cmd<=fnt_def1+3) do + begin case cur_cmd-fnt_def1 of + 0: cur_parm:=vf_ubyte; + 1: cur_parm:=vf_upair; + 2: cur_parm:=vf_utrio; + 3: cur_parm:=vf_squad; + end; {there are no other cases} + vf_do_font; + cur_cmd:=vf_ubyte; + end; +font_font(cur_fnt):=vf_i_fnts[0] + +@ The \.{VF} format specifies that the interpretation of each packet +begins with |w=x=y=z=0|; any |w0|, |x0|, |y0|, or |z0| command using +these initial values will be ignored. + +@<Types...@>= +@!vf_state=array[0..1,0..1] of boolean; {state of |w|, |x|, |y|, and |z|} + +@ As implied by the \.{VF} format the \.{DVI} commands read from the \.{VF} +file are enclosed by |push| and |pop|; as we read \.{DVI} +commands and append them to |byte_mem|, we perform a set of +transformations in order to simplify the resulting packet: Let |zero| be +any of the commands |put|, |put_rule|, |fnt_num|, |fnt|, or |xxx| which +all leave the current position on the page unchanged, let |move| be any +of the horizontal or vertical movement commands |right1..z4|, and let +|any| be any sequence of commands containing |push| and |pop| in +properly nested pairs; whenever possible we apply one of the following +transformation rules: $$\def\n#1:{\hbox to 3cm{\hfil#1:}} +\leqalignno{ +\hbox{|push| |zero|}&\RA\hbox{|zero| |push|}&\n1:\cr +\hbox{|move| |pop|}&\RA\hbox{|pop|}&\n2:\cr +\hbox{|push| |pop|}&\RA{}&\n3:\cr +\hbox{|push| |set_char| |pop|}&\RA\hbox{|put|}&\n4a:\cr +\hbox{|push| \\{set} |pop|}&\RA\hbox{|put|}&\n4b:\cr +\hbox{|push| |set_rule| |pop|}&\RA\hbox{|put_rule|}&\n4c:\cr +\hbox{|push| |push| |any| |pop|}&\RA\hbox{|push| |any| |pop| |push|}&\n5:\cr +\hbox{|push| |any| |pop| |pop|}&\RA\hbox{|any| |pop|}&\n6:\cr +}$$ + +@ In order to perform these transformations we need a stack which is +indexed by |vf_ptr|, the number of |push| commands without corresponding +|pop| in the packet we are building; the |vf_push_loc| array contains +the locations in |byte_mem| following such |push| commands. +In view of rule~5 consecutive |push| commands are never stored, the +|vf_push_num| array is used to count them. +The |vf_last| array indicates the type of the last non-discardable item: +a character, a rule, or a group enclosed by |push| and |pop|; +the |vf_last_end| array points to the ending locations and, if +|vf_last<>vf_other|, the |vf_last_loc| array points to the starting +locations of these items. + +@d vf_set=0 {|vf_set=char_cl|, last item is a |set_char| or \\{set}} +@d vf_rule=1 {|vf_rule=rule_cl|, last item is a |set_rule|} +@d vf_group=2 {last item is a group enclosed by |push| and |pop|} +@d vf_put=3 {last item is a |put|} +@d vf_other=4 {last item (if any) is none of the above} + +@<Types...@>= +@!vf_type=vf_set..vf_other; + +@ @<Glob...@>= +@!vf_move: array[stack_pointer] of vf_state; {state of |w|, |x|, |y|, and |z|} +@!vf_push_loc: array[stack_pointer] of byte_pointer; {end of a |push|} +@!vf_last_loc: array[stack_pointer] of byte_pointer; {start of an item} +@!vf_last_end: array[stack_pointer] of byte_pointer; {end of an item} +@!vf_push_num: array[stack_pointer] of eight_bits; {|push| count} +@!vf_last: array[stack_pointer] of vf_type; {type of last item} +@!vf_ptr:stack_pointer; {current number of unfinished groups} +@!stack_used:stack_pointer; {largest |vf_ptr| or |stack_ptr| value} + +@ We use two small arrays to determine the item type of a character or a +rule. + +@<Glob...@>= +@!vf_char_type:array[boolean] of vf_type; +@!vf_rule_type:array[boolean] of vf_type; + +@ @<Set init...@>= +vf_move[0][0][0]:=false; vf_move[0][0][1]:=false; +vf_move[0][1][0]:=false; vf_move[0][1][1]:=false;@/ +stack_used:=0;@/ +vf_char_type[false]:=vf_put; vf_char_type[true]:=vf_set;@/ +vf_rule_type[false]:=vf_other; vf_rule_type[true]:=vf_rule; + +@ Here we read the first bytes of a character packet from the \.{VF} or \.{OVF} +file and initialize the packet being built in |byte_mem|; the start of +the whole packet is stored in |vf_push_loc[0]|. When the character +packet is finished, a type is be assigned to it: |vf_simple| if the +packet ends with a character of the correct width, or |vf_complex| +otherwise. Moreover, if such a packet for a character with +extension zero consists of just one character with extension zero and +the same residue, and if there is no previous packet, the whole packet +is replaced by the empty packet. + +@d vf_simple=0 {the packet ends with a character of the correct width} +@d vf_complex=vf_simple+1 {otherwise} + +@<VF: Build a character packet@>= +begin if cur_cmd<long_char then + begin vf_limit:=cur_cmd; + cur_ext:=0; cur_res:=vf_ubyte; vf_wp:=check_width(vf_fix3u); + end +else if font_extend(cur_fnt) then + begin vf_limit:=vf_uquad; + cur_ext:=0; cur_res:=vf_squad; vf_wp:=check_width(vf_fix4); + end +else begin vf_limit:=vf_uquad; + cur_ext:=vf_strio; cur_res:=vf_ubyte; vf_wp:=check_width(vf_fix4); + end; +Incr(vf_limit)(vf_loc); +vf_push_loc[0]:=byte_ptr; vf_last_end[0]:=byte_ptr; +vf_last[0]:=vf_other; vf_ptr:=0;@/ +start_packet(vf_complex); +@<VF: Append \.{DVI} commands to the character packet@>;@/ +k:=pckt_start[pckt_ptr]; +if vf_last[0]=vf_put then if cur_wp=vf_wp then + begin decr(byte_mem[k]); {change |vf_complex| into |vf_simple|} + if (byte_mem[k]=bi(0))and@|(vf_push_loc[0]=vf_last_loc[0])and@| + (cur_ext=0)and@|(cur_res=pckt_res) then byte_ptr:=k; + end; +build_packet; +cur_cmd:=vf_ubyte; +end + +@ For every \.{DVI} command read from the \.{VF} file some action is +performed; in addition the initial |push| and the final |pop| are +manufactured here. + +@<VF: Append \.{DVI} commands to the character packet@>= +vf_cur_fnt:=font_font(cur_fnt); vf_fnt:=vf_cur_fnt;@/ +last_pop:=false; cur_class:=push_cl; {initial |push|} +loop begin +reswitch:case cur_class of + three_cases(char_cl): @<VF: Do a |char|, |rule|, or |xxx|@>; + push_cl: @<VF: Do a |push|@>; + pop_cl: @<VF: Do a |pop|@>; + two_cases(w0_cl): + if vf_move[vf_ptr][0][cur_class-w0_cl] then append_one(cur_cmd); + three_cases(right_cl): + begin pckt_signed(dvi_right_cmd[cur_class],cur_parm); + if cur_class>=w_cl then vf_move[vf_ptr][0][cur_class-w_cl]:=true; + end; + two_cases(y0_cl): + if vf_move[vf_ptr][1][cur_class-y0_cl] then append_one(cur_cmd); + three_cases(down_cl): + begin pckt_signed(dvi_down_cmd[cur_class],cur_parm); + if cur_class>=y_cl then vf_move[vf_ptr][1][cur_class-y_cl]:=true; + end; + fnt_cl: vf_font; + fnt_def_cl: bad_font; + invalid_cl: if cur_cmd<>nop then bad_font; + end; {there are no other cases} + if vf_loc<vf_limit then vf_first_par + else if last_pop then goto done + else begin cur_class:=pop_cl; last_pop:=true; {final |pop|} + end; + end; +done:if (vf_ptr<>0)or(vf_loc<>vf_limit) then bad_font + +@ For a |push| we either increase |vf_push_num| or start a new level and +append a |push|. + +@d incr_stack(#)== +if #=stack_used then + if stack_used=stack_size then overflow(str_stack,stack_size) + else incr(stack_used); +incr(#) + +@<VF: Do a |push|@>= +if (vf_ptr>0)and(vf_push_loc[vf_ptr]=byte_ptr) then + begin if vf_push_num[vf_ptr]=255 then overflow(str_stack,255); + incr(vf_push_num[vf_ptr]); + end +else begin incr_stack(vf_ptr); + @<VF: Start a new level@>; + vf_push_num[vf_ptr]:=0; + end + +@ @<VF: Start a new level@>= +append_one(push); +vf_move[vf_ptr]:=vf_move[vf_ptr-1]; +vf_push_loc[vf_ptr]:=byte_ptr; +vf_last_end[vf_ptr]:=byte_ptr; +vf_last[vf_ptr]:=vf_other + +@ When a character, a rule, or an |xxx| is appended, transformation +rule~1 might be applicable. + +@<VF: Do a |char|, |rule|, or |xxx|@>= +begin if (vf_ptr=0)or(byte_ptr>vf_push_loc[vf_ptr]) then move_zero:=false +else case cur_class of +char_cl: move_zero:=(not cur_upd)or(vf_cur_fnt<>vf_fnt); +rule_cl: move_zero:=not cur_upd; +xxx_cl: move_zero:=true; +end; {there are no other cases} +if move_zero then + begin decr(byte_ptr); decr(vf_ptr); + end; +case cur_class of +char_cl: @<VF: Do a |fnt|, a |char|, or both@>; +rule_cl: @<VF: Do a |rule|@>; +xxx_cl: @<VF: Do an |xxx|@>; +end; {there are no other cases} +vf_last_end[vf_ptr]:=byte_ptr; +if move_zero then + begin incr(vf_ptr); append_one(push); vf_push_loc[vf_ptr]:=byte_ptr; + vf_last_end[vf_ptr]:=byte_ptr; + if cur_class=char_cl then if cur_upd then goto reswitch; + end; +end + +@ A special situation arises if transformation rule~1 is applied to a +|fnt_num| of |fnt| command, but not to the |set_char| or \\{set} command +following it; in this case |cur_upd| and |move_zero| are both |true| and +the |set_char| or \\{set} command will be appended later. + +@<VF: Do a |fnt|, a |char|, or both@>= +begin if vf_cur_fnt<>vf_fnt then + begin vf_last[vf_ptr]:=vf_other; + pckt_unsigned(fnt1,vf_cur_fnt); vf_fnt:=vf_cur_fnt; + end; +if (not move_zero)or(not cur_upd) then + begin vf_last[vf_ptr]:=vf_char_type[cur_upd]; + vf_last_loc[vf_ptr]:=byte_ptr; + pckt_char(cur_upd,cur_ext,cur_res); + end; +end + +@ @<VF: Do a |rule|@>= +begin vf_last[vf_ptr]:=vf_rule_type[cur_upd]; +vf_last_loc[vf_ptr]:=byte_ptr; +append_one(dvi_rule_cmd[cur_upd]); +pckt_four(cur_v_dimen); pckt_four(cur_h_dimen); +end + +@ @<VF: Do an |xxx|@>= +begin vf_last[vf_ptr]:=vf_other; +pckt_unsigned(xxx1,cur_parm); pckt_room(cur_parm); +while cur_parm>0 do + begin append_byte(vf_ubyte); decr(cur_parm); + end; +end + +@ Transformation rules 2--6 are triggered by a |pop|, either read from +the \.{VF} file or manufactured at the end of the packet. + +@<VF: Do a |pop|@>= +begin if vf_ptr<1 then bad_font; +byte_ptr:=vf_last_end[vf_ptr]; {this is rule 2} +if vf_last[vf_ptr]<=vf_rule then + if vf_last_loc[vf_ptr]=vf_push_loc[vf_ptr] then + @<VF: Prepare for rule 4@>; +if byte_ptr=vf_push_loc[vf_ptr] then @<VF: Apply rule 3 or 4@> +else begin if vf_last[vf_ptr]=vf_group then @<VF: Apply rule 6@>; + append_one(pop); decr(vf_ptr); vf_last[vf_ptr]:=vf_group; + vf_last_loc[vf_ptr]:=vf_push_loc[vf_ptr+1]-1; + vf_last_end[vf_ptr]:=byte_ptr; + if vf_push_num[vf_ptr+1]>0 then @<VF: Apply rule 5@>; + end; +end + +@ In order to implement transformation rule~4, we cancel the |set_char|, +\\{set}, or |set_rule|, append a |pop|, and insert a |put| or |put_rule| +with the old parameters. + +@<VF: Prepare for rule 4@>= +begin cur_class:=vf_last[vf_ptr]; cur_upd:=false; +byte_ptr:=vf_push_loc[vf_ptr]; +end + +@ @<VF: Apply rule 3 or 4@>= +begin if vf_push_num[vf_ptr]>0 then + begin decr(vf_push_num[vf_ptr]); + vf_move[vf_ptr]:=vf_move[vf_ptr-1]; + end +else begin decr(byte_ptr); decr(vf_ptr); + end; +if cur_class<>pop_cl then goto reswitch; {this is rule 4} +end + +@ @<VF: Apply rule 6@>= +begin Decr(byte_ptr)(2); +for k:=vf_last_loc[vf_ptr]+1 to byte_ptr do byte_mem[k-1]:=byte_mem[k]; +vf_last[vf_ptr]:=vf_other; vf_last_end[vf_ptr]:=byte_ptr; +end + +@ @<VF: Apply rule 5@>= +begin incr(vf_ptr); +@<VF: Start a new level@>; +decr(vf_push_num[vf_ptr]); +end + +@ The \.{VF} formats specify that after a character packet invoked by a +|set_char| or \\{set} command, ``|h|~is increased by the \.{TFM} width +(properly scaled)---just as if a simple character had been typeset''; +for |vf_simple| packets this is achieved by changing the final |put| +command into |set_char| or \\{set}, but for |vf_complex| packets an +explicit movement must be done. This poses a problem for programs, +such as \.{DVIcopy}, which write a new \.{DVI} file with all references +to characters from virtual fonts replaced by their character packets: +The \.{DVItype} program specifies that the horizontal movements after a +|set_char| or \\{set} command, after a |set_rule| command, and after one +of the commands |right1..x4|, are all treated differently when \.{DVI} +units are converted to pixels. + +Thus we introduce a slight extension of \.{DVItype}'s pixel rounding +algorithm and hope that this extension will become part of the standard +\.{DVItype} program in the near future: If a \.{DVI} file contains a +|set_rule| command for a rule with the negative height |width_dimen|, +then this rule shall be treated in exactly the same way as a ficticious +character whose width is the width of that rule; as value of |width_dimen| +we choose $-2^{31}$, the smallest signed 32-bit integer. + +@<Glob...@>= +@!width_dimen:int_32; {vertical dimension of special rules} + +@ When initializing |width_dimen| we are careful to avoid arithmetic +overflow. + +@<Set init...@>= +width_dimen:=-@"40000000; Decr(width_dimen)(@"40000000); + +@* Terminal communication. +When \.{\title} begins, it engages the user in a brief dialog so that +various options may be specified. This part of \.{\title} requires +nonstandard \PASCAL\ constructions to handle the online interaction; so +it may be preferable in some cases to omit the dialog and simply to +stick to the default options. On other hand, the system-dependent +routines that are needed are not complicated, so it will not be terribly +difficult to introduce them; furthermore they are similar to those in +\.{DVItype}. + +It may be desirable to (optionally) specify all the options in the +command line and skip the dialog with the user, provided the operating +system permits this. Here we just define the system-indepent part of the +code required for this possibility. Since a complete option (a keyword +possibly followed by one or several parameters) may have embedded blanks +it might be necessary to replace these blanks by some other separator, +e.g., by a '/'. Using, e.g., \.{UNIX} style options one might then say +$$\.{\title\space-mag/2000 -sel/17.3/5 -sel/47 ...}$$ +to override the magnification factor that is stated in the \.{DVI} file, +and to select five pages starting with the page numbered~17.3 as well as +all remaining pages starting with the one numbered~47; alternatively one +might simply say +$$\.{\title\space- ...}$$ +to skip the dialog and use the default options. + +The system-dependent initialization code should set the |n_opt| variable +to the number of options found in the command line. If |n_opt=0| the +|input_ln| procedure defined below will promt the user for options. If +|n_opt>0| the |k_opt| variable will be incremented and another piece of +system-dependent code is invoked instead of the dialog; that code should +place the value of command line option number |k_opt| as temporary +string into the |byte-mem| array. This process will be repeated until +|k_opt=n_opt|, indicating that all command line options have been +processed. +@^system dependencies@> + +@d opt_separator="/" {acts as blank when scanning (command line) options} + +@<Set init...@>= +n_opt:=0; {change this to indicate the presence of command line options} +k_opt:=0; {just in case} + +@ The |input_ln| routine waits for the user to type a line at his or her +terminal; then it puts ASCII-code equivalents for the characters on that +line into the |byte_mem| array as a temporary string. \PASCAL's +standard |input| file is used for terminal input, as |output| is used +for terminal output. + +Since the terminal is being used for both input and output, some systems +need a special routine to make sure that the user can see a prompt message +before waiting for input based on that message. (Otherwise the message +may just be sitting in a hidden buffer somewhere, and the user will have +no idea what the program is waiting for.) We shall invoke a system-dependent +subroutine |update_terminal| in order to avoid this problem. +@^system dependencies@> + +@d update_terminal == break(output) {empty the terminal output buffer} +@# +@d scan_blank(#)== {tests for `blank' when scanning (command line) options} + ((byte_mem[#]=bi(" "))or(byte_mem[#]=bi(opt_separator))) +@d scan_skip== {skip `blanks'} + while scan_blank(scan_ptr)and(scan_ptr<byte_ptr) do incr(scan_ptr) +@d scan_init== {initialize |scan_ptr|} + byte_mem[byte_ptr]:=bi(" "); scan_ptr:=pckt_start[pckt_ptr-1]; scan_skip + +@<Action procedures for |dialog|@>= +procedure input_ln; {inputs a line from the terminal} +var k:0..terminal_line_length; +begin if n_opt=0 then + begin print('Enter option: '); update_terminal; reset(input); + if eoln(input) then read_ln(input); + k:=0; pckt_room(terminal_line_length); + while (k<terminal_line_length)and not eoln(input) do + begin append_byte(xord[input^]); incr(k); get(input); + end; + end +else if k_opt<n_opt then + begin incr(k_opt); + {Copy command line option number |k_opt| into |byte_mem| array!} + end; +end; + +@ The global variable |scan_ptr| is used while scanning the temporary +packet; it points to the next byte in |byte_mem| to be examined. + +@<Glob...@>= +@!n_opt:int_16; {number of options found in command line} +@!k_opt:int_16; {number of command line options processed} +@!scan_ptr:byte_pointer; {pointer to next byte to be examined} +@!sep_char:text_char; {|' '| or |xchr[opt_separator]|} + +@ The |scan_keyword| function is used to test for keywords in a character +string stored as temporary packet in |byte_mem|; the result is |true| +(and |scan_ptr| is updated) if the characters starting at position +|scan_ptr| are an abbreviation of a given keyword followed by at least +one blank. + +@<Action procedures for |dialog|@>= +function scan_keyword(@!p:pckt_pointer;@!l:int_7):boolean; +var i,@!j,@!k:byte_pointer; {indices into |byte_mem|} +begin i:=pckt_start[p]; j:=pckt_start[p+1]; k:=scan_ptr; +while (i<j)and((byte_mem[k]=byte_mem[i])or(byte_mem[k]=byte_mem[i]-"a"+"A")) do + begin incr(i); incr(k); + end; +if scan_blank(k)and(i-pckt_start[p]>=l) then + begin scan_ptr:=k; scan_skip; scan_keyword:=true; + end +else scan_keyword:=false; +end; + +@ Here is a routine that scans a (possibly signed) integer and computes +the decimal value. If no decimal integer starts at |scan_ptr|, the +value~0 is returned. The integer should be less than $2^{31}$ in +absolute value. + +@<Action procedures for |dialog|@>= +function scan_int:int_32; +var x:int_32; {accumulates the value} +@!negative:boolean; {should the value be negated?} +begin if byte_mem[scan_ptr]="-" then + begin negative:=true; incr(scan_ptr); + end +else negative:=false; +x:=0; +while (byte_mem[scan_ptr]>="0")and(byte_mem[scan_ptr]<="9") do + begin x:=10*x+byte_mem[scan_ptr]-"0"; incr(scan_ptr); + end; +scan_skip; +if negative then scan_int:=-x @+ else scan_int:=x; +end; + +@ The selected options are put into global variables by the |dialog| +procedure, which is called just as \.{\title} begins. +@^system dependencies@> + +@p @<Action procedures for |dialog|@>@; +procedure dialog; +label exit; +var p:pckt_pointer; {packet being created} +begin @<Initialize options@>@; +loop begin input_ln; p:=new_packet; scan_init; + if scan_ptr=byte_ptr then + begin flush_packet; return; + end@;@/ + @<Cases for options@>@;@/ + else begin if n_opt=0 then sep_char:=' ' + else sep_char:=xchr[opt_separator]; + print_options; + if n_opt>0 then + begin print('Bad command line option: '); + print_packet(p); abort('---run terminated'); + end; + end; + flush_packet; + end; +exit:end; + +@ The |print_options| procedure might be used in a `Usage message' +displaying the command line syntax. + +@<Basic printing...@>= +procedure print_options; +begin print_ln('Valid options are:'); +@<Print valid options@>@; +end; + +@* Subroutines for typesetting commands. +This is the central part of the whole \.{\title} program: +When a typesetting command from the \.{DVI} file or from a \.{VF} packet +has been decoded, one of the typesetting routines defined below is +invoked to execute the command; apart from the necessary book keeping, +these routines invoke device dependent code defined later. + +@p @<Declare typesetting procedures@> + +@ These typesetting routines communicate with the rest of the program +through global variables. + +@<Glob...@>= +@!type_setting:boolean; {|true| while typesetting a page} + +@ @<Set init...@>= +type_setting:=false; + +@ The user may select up to |max_select| ranges of consecutive pages to +be processed. Each starting page specification is recorded in two global +arrays called |start_count| and |start_there|. For example, `\.{1.*.-5}' +is represented by |start_there[0]=true|, |start_count[0]=1|, +|start_there[1]=false|, |start_there[2]=true|, |start_count[2]=-5|. We +also set |start_vals=2|, to indicate that count 2 was the last one +mentioned. The other values of |start_count| and |start_there| are not +important, in this example. The number of pages is recorded in +|max_pages|; a non positive value indicates that there is no limit. + +@d start_count==select_count[cur_select] {count values to select + starting page} +@d start_there==select_there[cur_select] {is the |start_count| value + relevant?} +@d start_vals==select_vals[cur_select] {the last count considered + significant} +@d max_pages==select_max[cur_select] {at most this many |bop..eop| pages + will be printed} + +@<Glob...@>= +@!select_count:array[0..max_select-1,0..9] of int_32; +@!select_there:array[0..max_select-1,0..9] of boolean; +@!select_vals:array[0..max_select-1] of 0..9; +@!select_max:array[0..max_select-1] of int_32; +@!out_mag:int_32; {output maginfication} +@!count:array[0..9] of int_32; {the count values on the current page} +@!num_select:0..max_select; {number of page selection ranges specified} +@!cur_select:0..max_select; {current page selection range} +@!selected:boolean; {has starting page been found?} +@!all_done:boolean; {have all selected pages been processed?} +@!str_mag,@!str_select:pckt_pointer; + +@ Here is a simple subroutine that tests if the current page might be the +starting page. + +@p function start_match:boolean; {does |count| match the starting spec?} +var k:0..9; {loop index} +@!match:boolean; {does everything match so far?} +begin match:=true; +for k:=0 to start_vals do + if start_there[k]and(start_count[k]<>count[k]) then match:=false; +start_match:=match; +end; + +@ @<Initialize options@>= +out_mag:=0; cur_select:=0; max_pages:=0; selected:=true; + +@ @<Print valid options@>= +print_ln(' mag',sep_char,'<new_mag>'); +print_ln(' select',sep_char,'<start_count>',sep_char, + '[<max_pages>] (up to ',max_select:1,' ranges)'); + +@ @<Action procedures for |dialog|@>= +procedure scan_count; {scan a |start_count| value} +begin if byte_mem[scan_ptr]=bi("*") then + begin start_there[start_vals]:=false; incr(scan_ptr); scan_skip; + end +else begin start_there[start_vals]:=true; + start_count[start_vals]:=scan_int; + if cur_select=0 then selected:=false; {don't start at first page} + end; +end; + +@ @<Cases for options@>= +else if scan_keyword(str_mag,3) then out_mag:=scan_int +else if scan_keyword(str_select,3) then + if cur_select=max_select then print_ln('Too many page selections') + else begin start_vals:=0; scan_count; + while (start_vals<9)and(byte_mem[scan_ptr]=bi(".")) do + begin incr(start_vals); incr(scan_ptr); scan_count; + end; + max_pages:=scan_int; incr(cur_select); + end + +@ @<Initialize predefined strings@>= +id3("m")("a")("g")(str_mag); +id6("s")("e")("l")("e")("c")("t")(str_select); + +@ A stack is used to keep track of the current horizonal and vertical +position, |h| and |v|, and the four registers |w|, |x|, |y|, and |z|; +the register pairs |(w,x)| and |(y,z)| are maintained as arrays. + +@<Types...@>= +@!device @<Declare device dependend types@>@; @+ ecived @; @/ +@!stack_pointer=0..stack_size;@/ +@!stack_index=1..stack_size;@/ +@!pair_32=array[0..1] of int_32; {a pair of |int_32| variables} +@!stack_record=record@;@/ + @!h_field:int_32; {horizontal position |h|} + @!v_field:int_32; {vertical position |v|} + @!w_x_field:pair_32; {|w| and |x| register for horizontal movements} + @!y_z_field:pair_32; {|y| and |z| register for vertical movements} + @!device @<Device dependent stack record fields@>@; @+ ecived @; @/ + end; + +@ The current values are kept in |cur_stack|; they are pushed onto and +popped from |stack|. We use \.{WEB} macros to access the current values. + +@d cur_h==cur_stack.h_field {the current |@!h| value} +@d cur_v==cur_stack.v_field {the current |@!v| value} +@d cur_w_x==cur_stack.w_x_field {the current |@!w| and |@!x| value} +@d cur_y_z==cur_stack.y_z_field {the current |@!y| and |@!z| value} + +@<Glob...@>= +@!stack:array[stack_index] of stack_record; {the pushed values} +@!cur_stack:stack_record; {the current values} +@!zero_stack:stack_record; {initial values} +@!stack_ptr:stack_pointer; {last used position in |stack|} + +@ @<Set init...@>= +zero_stack.h_field:=0; zero_stack.v_field:=0; +for i:=0 to 1 do + begin zero_stack.w_x_field[i]:=0; zero_stack.y_z_field[i]:=0; + end; +@!device @<Initialize device dependent stack record fields@>@; @+ ecived @; @/ + +@ When typesetting for a real device we must convert the current +position from \.{DVI} units to pixels, i.e., |cur_h| and |cur_v| into +|cur_hh| and |cur_vv|. This might be a good place to collect everything +related to the conversion from \.{DVI} units to pixels and in particular +all the pixel rounding algorithms. + +@d font_space(#)==fnt_space[#] {boundary between ``small'' and ``large'' + spaces} + +@<Declare device dependent font data arrays@>= +@!fnt_space:array [font_number] of int_32; {boundary between ``small'' + and ``large'' spaces} + +@ @<Initialize device dependent font data@>= +font_space(invalid_font):=0; + +@ @<Initialize device dependent data for a font@>= +font_space(cur_fnt):=font_scaled(cur_fnt) div 6; + {this is a 3-unit ``thin space''} + +@ The |char_pixels| array is used to store the horizontal character +escapements: for \.{PK} or \.{GF} files we use the values given there, +otherwise we must convert the character widths to (horizontal) pixels. +The horizontal escapement of character~|c| in font~|f| is given by +|font_pixel(f)(c)|. + +@d font_pixel(#)==char_pixels[font_chars(#)+font_width_end +@# +@d max_pix_value==@"7FFF {largest allowed pixel value; this range may not + suffice for high resolution output devices} + +@<Declare device dependend types@>= +@!pix_value=-max_pix_value..max_pix_value; {a pixel coordinate or displacement} + +@ @<Glob...@>= +@!device +@!char_pixels:array[char_pointer] of pix_value; {character escapements} +@!h_pixels:pix_value; {a horizontal dimension in pixels} +@!v_pixels:pix_value; {a vertical dimension in pixels} +@!temp_pix:pix_value; {temporary value for pixel rounding} +ecived + +@ @d cur_hh==cur_stack.hh_field {the current |@!hh| value} +@d cur_vv==cur_stack.vv_field {the current |@!vv| value} + +@<Device dependent stack record fields@>= +@!hh_field:pix_value; {horizontal pixel position |hh|} +@!vv_field:pix_value; {vertical pixel position |vv|} + +@ @<Initialize device dependent stack record fields@>= +zero_stack.hh_field:=0; zero_stack.vv_field:=0; + +@ For small movements we round the increment in position, for large +movements we round the incremented position. The same applies to rule +dimensions with the only difference that they will always be rounded +towards larger values. For characters we increment the horizontal +position by the escapement values obtained, e.g., from a \.{PK} file or +by the \.{TFM} width converted to pixels. + +@d h_pixel_round(#)==round(h_conv*(#)) +@d v_pixel_round(#)==round(v_conv*(#)) +@^system dependencies@> +@# +@d large_h_space(#)==(#>=font_space(cur_fnt))or(#<=-4*font_space(cur_fnt)) + {is this a ``large'' horizontal distance?} +@d large_v_space(#)==(abs(#)>=5*font_space(cur_fnt)) + {is this a ``large'' vertical distance?} +@# +@d h_rule_pixels== {converts the rule width |cur_h_dimen| to pixels} +@!device if large_h_space(cur_h_dimen) then + begin h_pixels:=h_pixel_round(cur_h+cur_h_dimen)-cur_hh; + if h_pixels<=0 then if cur_h_dimen>0 then h_pixels:=1; + end +else begin h_pixels:=trunc(h_conv*cur_h_dimen); + if h_pixels<h_conv*cur_h_dimen then incr(h_pixels); + end; +ecived +@# +@d v_rule_pixels== {converts the rule height |cur_v_dimen| to pixels} +@!device if large_v_space(cur_v_dimen) then + begin v_pixels:=cur_vv-v_pixel_round(cur_v-cur_v_dimen); + if v_pixels<=0 then v_pixels:=1; {used only for |cur_v_dimen>0|} + end +else begin v_pixels:=trunc(v_conv*cur_v_dimen); + if v_pixels<v_conv*cur_v_dimen then incr(v_pixels); + end; +ecived + +@ A sequence of consecutive rules, or consecutive characters in a +fixed-width font whose width is not an integer number of pixels, can +cause |hh| to drift far away from a correctly rounded value. \.{\title} +ensures that the amount of drift will never exceed |max_h_drift| pixels; +similarly |vv| shall never drift away from the correctly rounded value +by more than |max_v_drift| pixels. + +@d h_upd_end(#)== {check for proper horizontal pixel rounding} +begin Incr(cur_hh)(#); temp_pix:=h_pixel_round(cur_h); +if abs(temp_pix-cur_hh)>max_h_drift then + if temp_pix>cur_hh then cur_hh:=temp_pix-max_h_drift + else cur_hh:=temp_pix+max_h_drift; +end @+ ecived +@d h_upd_char(#)==Incr(cur_h)(#)@; + @!device; h_upd_end +@d h_upd_move(#)==Incr(cur_h)(#)@; + @!device; if large_h_space(#) then cur_hh:=h_pixel_round(cur_h) + else h_upd_end +@# +@d v_upd_end(#)== {check for proper vertical pixel rounding} +begin Incr(cur_vv)(#); temp_pix:=v_pixel_round(cur_v); +if abs(temp_pix-cur_vv)>max_v_drift then + if temp_pix>cur_vv then cur_vv:=temp_pix-max_v_drift + else cur_vv:=temp_pix+max_v_drift; +end @+ ecived +@d v_upd_move(#)==Incr(cur_v)(#)@; + @!device; if large_v_space(#) then cur_vv:=v_pixel_round(cur_v) + else v_upd_end + +@ The routines defined below use sections named `Declare local variables +(if any) for \dots' or `Declare additional local variables for \dots'; +the former may declare variables (including the keyword \&{var}), whereas +the later must at least contain the keyword \&{var}. In general, both may +start with the declaration of labels, constants, and\slash or types. + +Let us start with the simple cases: +The |do_pre| procedure is called when the preamble has been read from +the \.{DVI} file; the preamble comment has just been converted into a +temporary packet with the |new_packet| procedure. + +@p procedure do_pre;@/ +@<OUT: Declare local variables (if any) for |do_pre|@>@; +begin all_done:=false; num_select:=cur_select; cur_select:=0; +if num_select=0 then max_pages:=0; +@!device +h_conv:=(dvi_num/254000.0)*(h_resolution/dvi_den)*(out_mag/1000.0); +v_conv:=(dvi_num/254000.0)*(v_resolution/dvi_den)*(out_mag/1000.0); +ecived @; @/ +@<OUT: Process the |pre|@>@;@/ +end; + +@ The |do_bop| procedure is called when a |bop| has been read. This +routine determines whether a page shall be processed or skipped and sets +the variable |type_setting| accordingly. + +@p procedure do_bop;@/ +@<OUT: Declare additional local variables |do_bop|@>@; +@!i,@!j:0..9; {indices into |count|} +begin @<Determine whether this page should be processed or skipped@>; +print('DVI: '); +if type_setting then print('process') @+ else print('skipp'); +print('ing page ',count[0]:1); j:=9; +while (j>0)and(count[j]=0) do decr(j); +for i:=1 to j do print('.',count[i]:1); +d_print(' at ',dvi_loc-45:1); +print_ln('.'); +if type_setting then + begin stack_ptr:=0; cur_stack:=zero_stack; cur_fnt:=invalid_font;@/ + @<OUT: Process a |bop|@>@;@/ + end; +end; + +@ Note that the device dependent code `OUT: Process a |bop|' may choose +to set |type_setting| to false even if |selected| is true. + +@<Determine whether this page...@>= +if not selected then selected:=start_match; +type_setting:=selected + +@ The |do_eop| procedure is called in order to process an |eop|; the +stack should be empty. + +@p procedure do_eop;@/ +@<OUT: Declare local variables (if any) for |do_eop|@>@; +begin if stack_ptr<>0 then bad_dvi; +@<OUT: Process an |eop|@>@; +if max_pages>0 then + begin decr(max_pages); + if max_pages=0 then + begin selected:=false; incr(cur_select); + if cur_select=num_select then all_done:=true; + end; + end; +type_setting:=false; +end; + +@ The procedures |do_push| and |do_pop| are called in order to process +|push| and |pop| commands; |do_push| must check for stack overflow, +|do_pop| should never be called when the stack is empty. + +@p procedure do_push; {push onto stack} +@<OUT: Declare local variables (if any) for |do_push|@>@; +begin incr_stack(stack_ptr); stack[stack_ptr]:=cur_stack;@/ +@<OUT: Process a |push|@>@; +end; +@# +procedure do_pop; {pop from stack} +@<OUT: Declare local variables (if any) for |do_pop|@>@; +begin if stack_ptr=0 then bad_dvi; +cur_stack:=stack[stack_ptr]; decr(stack_ptr); +@<OUT: Process a |pop|@>@;@/ +end; + +@ The |do_xxx| procedure is called in order to process a special command. +The bytes of the special string have been put into |byte_mem| as the +current string. They are converted to a temporary packet and discarded +again. + +@p procedure do_xxx;@/ +@<OUT: Declare additional local variables for |do_xxx|@>@; +@!p:pckt_pointer; {temporary packet} +begin p:=new_packet;@/ +@<OUT: Process an |xxx|@>@;@/ +flush_packet; +end; + +@ Next are the movement commands: +The |do_right| procedure is called in order to process the horizontal +movement commands |right|, |w|, and |x|. + + +@p procedure do_right;@/ +@<OUT: Declare local variables (if any) for |do_right|@>@; +begin if cur_class>=w_cl then cur_w_x[cur_class-w_cl]:=cur_parm +else if cur_class<right_cl then cur_parm:=cur_w_x[cur_class-w0_cl]; +@<OUT: Process a |right| or |w| or |x|@>@;@/ +h_upd_move(cur_parm)(h_pixel_round(cur_parm)); +@<OUT: Move right@>@; +end; + +@ The |do_down| procedure is called in order to process the vertical +movement commands |down|, |y|, and |z|. + +@p procedure do_down;@/ +@<OUT: Declare local variables (if any) for |do_down|@>@; +begin if cur_class>=y_cl then cur_y_z[cur_class-y_cl]:=cur_parm +else if cur_class<down_cl then cur_parm:=cur_y_z[cur_class-y0_cl]; +@<OUT: Process a |down| or |y| or |z|@>@;@/ +v_upd_move(cur_parm)(v_pixel_round(cur_parm)); +@<OUT: Move down@>@; +end; + +@ The |do_width| procedure, or actually the |do_a_width| macro, is +called in order to increase the current horizontal position |cur_h| by +|cur_h_dimen| in exactly the same way as if a character of width +|cur_h_dimen| had been typeset. + +@d do_a_width(#)== + begin @!device h_pixels:=#; @+ ecived @; @+ do_width; + end + +@p procedure do_width;@/ +@<OUT: Declare local variables (if any) for |do_width|@>@; +begin @<OUT: Typeset a |width|@>@;@/ +h_upd_char(cur_h_dimen)(h_pixels); +@<OUT: Move right@>@; +end; + +@ Finally we have the commands for the typesetting of rules and characters; +the global variable |cur_upd| is |true| if the horizontal position shall +be updated (\\{set} commands). + +The |do_rule| procedure is called in order to typeset a rule. + +@p procedure do_rule;@/ +@<OUT: Declare additional local variables |do_rule|@>@; +@!visible:boolean; +begin h_rule_pixels@; +if (cur_h_dimen>0)and(cur_v_dimen>0) then + begin visible:=true; v_rule_pixels@; + @<OUT: Typeset a visible |rule|@>@; + end +else begin visible:=false; + @<OUT: Typeset an invisible |rule|@>@; + end; +if cur_upd then + begin h_upd_move(cur_h_dimen)(h_pixels); + @<OUT: Move right@>@; + end; +end; + +@ Last not least the |do_char| procedure is called in order to typeset +character~|cur_res| with extension~|cur_ext| from the real font~|cur_fnt|. + +@p procedure do_char;@/ +@<OUT: Declare local variables (if any) for |do_char|@>@; +begin @<OUT: Typeset a |char|@>@; +if cur_upd then + begin h_upd_char(widths[cur_wp])(char_pixels[cur_cp]); + @<OUT: Move right@>@; + end; +end; + +@ If the program terminates abnormally, the following code may be +invoked in the middle of a page. + +@<Finish output file(s)@>= +begin if type_setting then @<OUT: Finish incomplete page@>; +@<OUT: Finish output file(s)@>@; +end + +@ When the first character of font~|cur_fnt| is about to be typeset, the +|do_font| procedure is called in order to decide whether this is a +virtual font or a real font. + +One step in this decision is the attempt to find and read the \.{VF} +file for this font; other attempts to locate a font file may be +performed before and after that, depending on the nature of the output +device and on the structure of the file system at a particular +installation. For a real device we convert the character widths to +(horizontal) pixels. + +In any case |do_font| must change |font_type(cur_fnt)| to a value +|>defined_font|; as a last resort one might use the \.{TFM} width data +and draw boxes or leave blank spaces in the output. + +@p procedure do_font;@/ +label done;@/ +@<OUT: Declare additional local variables for |do_font|@>@; +@!p:char_pointer; {index into |char_widths| and |char_pixels|} +begin @!debug if font_type(cur_fnt)=defined_font then confusion(str_fonts); +gubed@; +@!device for p:=font_chars(cur_fnt)+font_bc(cur_fnt) + to font_chars(cur_fnt)+font_ec(cur_fnt) do + char_pixels[p]:=h_pixel_round(widths[char_widths[p]]); +ecived@; +@<OUT: Look for a font file before trying to read the \.{VF} file; + if found |goto done|@>@;@/ +if do_vf then goto done; {try to read the \.{VF} file} +@<OUT: Look for a font file after trying to read the \.{VF} file@>@;@/ +done: +@!debug if font_type(cur_fnt)<=loaded_font then confusion(str_fonts); +gubed@; +end; + +@ Before a character of font~|cur_fnt| is typeset the following piece of +code ensures that the font is ready to be used. + +@<Prepare to use font |cur_fnt|@>= +@<OUT: Prepare to use font |cur_fnt|@>@; +if font_type(cur_fnt)<=loaded_font then do_font {|cur_fnt| was not yet used} + +@* Interpreting VF packets. +The |pckt_first_par| procedure first reads a \.{DVI} command byte from +the packet into |cur_cmd|; then |cur_parm| is set to the value of the +first parameter (if any) and |cur_class| to the command class. + +@p procedure pckt_first_par; +begin cur_cmd:=pckt_ubyte; +case dvi_par[cur_cmd] of +char_par: set_cur_char(pckt_ubyte); +no_par: do_nothing; +dim1_par: cur_parm:=pckt_sbyte; +num1_par: cur_parm:=pckt_ubyte; +dim2_par: cur_parm:=pckt_spair; +num2_par: cur_parm:=pckt_upair; +dim3_par: cur_parm:=pckt_strio; +num3_par: cur_parm:=pckt_utrio; +three_cases(dim4_par): cur_parm:=pckt_squad; {|dim4|, |num4|, or |numu|} +rule_par: + begin cur_v_dimen:=pckt_squad; cur_h_dimen:=pckt_squad; + cur_upd:=(cur_cmd=set_rule); + end; +fnt_par:cur_parm:=cur_cmd-fnt_num_0; +end; {there are no other cases} +cur_class:=dvi_cl[cur_cmd]; +end; + +@ The |do_vf_packet| procedure is called in order to interpret the +character packet for a virtual character. Such a packet may contain the +instruction to typeset a character from the same or an other virtual +font; in such cases |do_vf_packet| calls itself recursively. The +recursion level, i.e., the number of times this has happened, is kept +in the global variable |n_recur| and should not exceed |max_recursion|. +@^recursion@> + +@<Types...@>= +@!recur_pointer=0..max_recursion; + +@ The \.{\title} processor should detect an infinite recursion caused by +bad \.{VF} files; thus a new recursion level is entered even in cases +where this could be avoided without difficulty. + +If the recursion level exceeds the allowed maximum, we want to give +a traceback how this has happened; thus some of the global variables +used in different invocations of |do_vf_packet| are saved in a stack, +others are saved as local variables of |do_vf_packet|. + +@<Glob...@>= +@!recur_fnt:array[recur_pointer] of font_number; {this packet's font} +@!recur_ext:array[recur_pointer] of int_24; {this packet's extension} +@!recur_res:array[recur_pointer] of int_32; {this packet's residue} +@!recur_pckt:array[recur_pointer] of pckt_pointer; {the packet} +@!recur_loc:array[recur_pointer] of byte_pointer; {next byte of packet} +@!n_recur:recur_pointer; {current recursion level} +@!recur_used:recur_pointer; {highest recursion level used so far} + +@ @<Set init...@>= +n_recur:=0; recur_used:=0; + +@ Here now is the |do_vf_packet| procedure. + +@p procedure do_vf_packet; +label continue,found,done; +var k:recur_pointer; {loop index} +@!f:int_8u; {packet type flag} +@!save_upd:boolean; {used to save |cur_upd|} +@!save_cp:width_pointer; {used to save |cur_cp|} +@!save_wp:width_pointer; {used to save |cur_wp|} +@!save_limit:byte_pointer; {used to save |cur_limit|} +begin @<VF: Save values on entry to |do_vf_packet|@>;@/ +@<VF: Interpret the \.{DVI} commands in the packet@>@;@/ +if save_upd then + begin cur_h_dimen:=widths[save_wp]; do_a_width(char_pixels[save_cp]); + end; +@<VF: Restore values on exit from |do_vf_packet|@>;@/ +end; + +@ On entry to |do_vf_packet| several values must be saved. + +@<VF: Save values on entry to |do_vf_packet|@>= +save_upd:=cur_upd; save_cp:=cur_cp; save_wp:=cur_wp;@/ +recur_fnt[n_recur]:=cur_fnt; +recur_ext[n_recur]:=cur_ext; +recur_res[n_recur]:=cur_res + +@ Some of these values must be restored on exit from |do_vf_packet|. + +@<VF: Restore values on exit from |do_vf_packet|@>= +cur_fnt:=recur_fnt[n_recur] + +@ If |cur_pckt| is the empty packet, we manufacture a |put| command; +otherwise we read and interpret \.{DVI} commands from the packet. + +@<VF: Interpret the \.{DVI} commands in the packet@>= +if find_packet then f:=cur_type @+ else goto done; +recur_pckt[n_recur]:=cur_pckt; +save_limit:=cur_limit; +cur_fnt:=font_font(cur_fnt); +if cur_pckt=empty_packet then + begin cur_class:=char_cl; goto found; + end; +if cur_loc>=cur_limit then goto done; +continue: pckt_first_par; +found: case cur_class of +char_cl: @<VF: Typeset a |char|@>; +rule_cl: do_rule; +xxx_cl: + begin pckt_room(cur_parm); + while cur_parm>0 do + begin append_byte(pckt_ubyte); decr(cur_parm); + end; + do_xxx; + end; +push_cl: do_push; +pop_cl: do_pop; +five_cases(w0_cl): do_right; {|right|, |w|, or |x|} +five_cases(y0_cl): do_down; {|down|, |y|, or |z|} +fnt_cl: cur_fnt:=cur_parm; +othercases confusion(str_packets); {font definition or invalid} +endcases; +if cur_loc<cur_limit then goto continue; +done: + +@ The final |put| of a simple packet may be changed into |set_char| or +\\{set}. + +@<VF: Typeset a |char|@>= +begin @<Prepare to use font |cur_fnt|@>; +cur_cp:=font_chars(cur_fnt)+cur_res; cur_wp:=char_widths[cur_cp]; +if (cur_loc=cur_limit)and(f=vf_simple) and save_upd then + begin save_upd:=false; cur_upd:=true; + end; +if font_type(cur_fnt)=vf_font_type then + @<VF: Enter a new recursion level@> +else do_char; +end + +@ Before entering a new recursion level we must test for overflow; in +addition a few variables must be saved and restored. +A |set_char| or \\{set} followed by |pop| is changed into |put|. + +@<VF: Enter a new recursion level@>= +begin recur_loc[n_recur]:=cur_loc; {save} +if cur_loc<cur_limit then + if byte_mem[cur_loc]=bi(pop) then cur_upd:=false; +if n_recur=recur_used then + if recur_used=max_recursion then + @<VF: Display the recursion traceback and terminate@> + else incr(recur_used);@/ +incr(n_recur); do_vf_packet; decr(n_recur); {recurse} +cur_loc:=recur_loc[n_recur]; cur_limit:=save_limit; {restore} +end + +@ @<VF: Display the recursion traceback and terminate@>= +begin print_ln(' !Infinite VF recursion?'); +@.Infinite VF recursion?@> +for k:=max_recursion downto 0 do + begin print('level=',k:1,' font'); + d_print('=',recur_fnt[k]:1); + print_font(recur_fnt[k]); + print(' char=',recur_res[k]:1); + if recur_ext[k]<>0 then print('.',recur_ext[k]:1); + new_line; + @!debug hex_packet(recur_pckt[k]); print_ln('loc=',recur_loc[k]:1); + gubed@; + end; +overflow(str_recursion,max_recursion); +end + +@* Interpreting the DVI file. +The |do_dvi| procedure reads the entire \.{DVI} file and initiates +whatever actions may be necessary. + +@p procedure do_dvi; +label done,exit; +var temp_byte:int_8u; {byte for temporary variables} +@!temp_int:int_32; {integer for temporary variables} +@!dvi_start:int_32; {starting location} +@!dvi_bop_post:int_32; {location of |bop| or |post|} +@!dvi_back:int_32; {a back pointer} +@!k:int_15; {general purpose variable} +begin @<DVI: Process the preamble@>; +if random_reading then @<DVI: Process the postamble@>; +repeat dvi_first_par; + while cur_class=fnt_def_cl do + begin dvi_do_font(random_reading); dvi_first_par; + end; + if cur_cmd=bop then @<DVI: Process one page@>; +until cur_cmd<>eop; +if cur_cmd<>post then bad_dvi; +exit:end; + +@ @<DVI: Process the preamble@>= +if dvi_ubyte<>pre then bad_dvi; +if dvi_ubyte<>dvi_id then bad_dvi; +dvi_num:=dvi_pquad; dvi_den:=dvi_pquad; dvi_mag:=dvi_pquad; +tfm_conv:=(25400000.0/dvi_num)*(dvi_den/473628672)/16.0; +temp_byte:=dvi_ubyte; pckt_room(temp_byte); +for k:=1 to temp_byte do append_byte(dvi_ubyte); +print('DVI file: '''); print_packet(new_packet); print_ln(''','); +print(' num=',dvi_num:1,', den=',dvi_den:1,', mag=',dvi_mag:1); +if out_mag<=0 then out_mag:=dvi_mag @+ else print(' => ',out_mag:1); +print_ln('.'); +do_pre; flush_packet + +@ @<Glob...@>= +@!dvi_num:int_31; {numerator} +@!dvi_den:int_31; {denominator} +@!dvi_mag:int_31; {magnification} + +@ @<DVI: Process the postamble@>= +begin dvi_start:=dvi_loc; {remember start of first page} +@<DVI: Find the postamble@>; +d_print_ln('DVI: postamble at ',dvi_bop_post:1); +dvi_back:=dvi_pointer; +if dvi_num<>dvi_pquad then bad_dvi; +if dvi_den<>dvi_pquad then bad_dvi; +if dvi_mag<>dvi_pquad then bad_dvi; +temp_int:=dvi_squad; temp_int:=dvi_squad; +if stack_size<dvi_upair then overflow(str_stack,stack_size); +temp_int:=dvi_upair; +dvi_first_par; +while cur_class=fnt_def_cl do + begin dvi_do_font(false); dvi_first_par; + end; +if cur_cmd<>post_post then bad_dvi; +if not selected then @<DVI: Find the starting page@>; +dvi_move(dvi_start); {go to first or starting page} +end + +@ @<DVI: Find the postamble@>= +temp_int:=dvi_length-5; +repeat if temp_int<49 then bad_dvi; +dvi_move(temp_int); temp_byte:=dvi_ubyte; decr(temp_int); +until temp_byte<>dvi_pad; +if temp_byte<>dvi_id then bad_dvi; +dvi_move(temp_int-4); if dvi_ubyte<>post_post then bad_dvi; +dvi_bop_post:=dvi_pointer; +if (dvi_bop_post<15)or(dvi_bop_post>dvi_loc-34) then bad_dvi; +dvi_move(dvi_bop_post); if dvi_ubyte<>post then bad_dvi + +@ @<DVI: Find the starting page@>= +begin dvi_start:=dvi_bop_post; {just in case} +while dvi_back<>-1 do + begin if (dvi_back<15)or(dvi_back>dvi_bop_post-46) then bad_dvi; + dvi_bop_post:=dvi_back; dvi_move(dvi_back); + if dvi_ubyte<>bop then bad_dvi; + for k:=0 to 9 do count[k]:=dvi_squad; + if start_match then dvi_start:=dvi_bop_post; + dvi_back:=dvi_pointer; + end; +end + +@ When a |bop| has been read, the \.{DVI} commands for one page are +interpreted until an |eop| is found. + +@<DVI: Process one page@>= +begin for k:=0 to 9 do count[k]:=dvi_squad; +temp_int:=dvi_pointer; do_bop; +dvi_first_par; +if type_setting then @<DVI: Process a page; then |goto done|@> +else @<DVI: Skip a page; then |goto done|@>; +done:if cur_cmd<>eop then bad_dvi; +if selected then + begin do_eop; + if all_done then return; + end; +end + +@ All \.{DVI} commands are processed, as long as |cur_class<>invalid_cl|; +then we should have found an |eop|. + +@<DVI: Process a page; then |goto done|@>= +loop begin + case cur_class of + char_cl: @<DVI: Typeset a |char|@>; + rule_cl: + if cur_upd and(cur_v_dimen=width_dimen) then + do_a_width(h_pixel_round(cur_h_dimen)) + else do_rule; + xxx_cl: + begin pckt_room(cur_parm); + while cur_parm>0 do + begin append_byte(dvi_ubyte); decr(cur_parm); + end; + do_xxx; + end; + push_cl: do_push; + pop_cl: do_pop; + five_cases(w0_cl): do_right; {|right|, |w|, or |x|} + five_cases(y0_cl): do_down; {|down|, |y|, or |z|} + fnt_cl: dvi_font; + fnt_def_cl: dvi_do_font(random_reading); + invalid_cl: goto done; + end; {there are no other cases} +dvi_first_par; {get the next command} +end + +@ While skipping a page all commands other than font definitions are +ignored. + +@<DVI: Skip a page; then |goto done|@>= +loop begin + case cur_class of + xxx_cl: while cur_parm>0 do + begin temp_byte:=dvi_ubyte; decr(cur_parm); + end; + fnt_def_cl: dvi_do_font(random_reading); + invalid_cl: goto done; + othercases do_nothing; + endcases; +dvi_first_par; {get the next command} +end + +@ @<DVI: Typeset a |char|@>= +begin @<Prepare to use font |cur_fnt|@>; +set_cur_wp(cur_fnt)(bad_dvi); +if font_type(cur_fnt)=vf_font_type then do_vf_packet @+ else do_char; +end + +@* The main program. +The code for real devices is still rather incomplete. +Moreover several branches of the program have not been tested because +they are never used with \.{DVI} files made by \TeX\ and \.{VF} files +made by \.{VPtoVF}. The same holds true for~$\Omega$. + +@ At the end of the program the output file(s) have to be finished and +on some systems it may be necessary to close input and\slash or output +files. +@^system dependencies@> + +@p procedure close_files_and_terminate; +var k:@!int_15; {general purpose index} +begin close_in(dvi_file); +if history<fatal_message then @<Finish output file(s)@>; +stat @<Print memory usage statistics@>;@+tats@;@/ +@<Close output file(s)@>@; +@<Print the job |history|@>; +end; + +@ Now we are ready to put it all together. +Here is where \.{\title} starts, and where it ends. +@^system dependencies@> + +@p begin initialize; {get all variables initialized} +@<Initialize predefined strings@>@; +dialog; {get options} +@<Open input file(s)@>@; +@<Open output file(s)@>@; +do_dvi; {process the entire \.{DVI} file} +close_files_and_terminate; +final_end:end. + +@ @<Print memory usage statistics@>= +print_ln('Memory usage statistics:'); +print(dvi_nf:1,' dvi, ',lcl_nf:1,' local, '); +@<Print more font usage statistics@>@;@/ +print_ln('and ',nf:1,' internal fonts of ',max_fonts:1); +print_ln(n_widths:1,' widths of ',max_widths:1,' for ', + n_chars:1,' characters of ',max_chars:1); +print_ln(pckt_ptr:1,' byte packets of ',max_packets:1,' with ', + byte_ptr:1,' bytes of ',max_bytes:1); +@<Print more memory usage statistics@>@;@/ +print_ln(stack_used:1,' of ',stack_size:1,' stack and ', + recur_used:1,' of ',max_recursion:1,' recursion levels.') + +@ Some implementations may wish to pass the |history| value to the +operating system so that it can be used to govern whether or not other +programs are started. Here we simply report the history to the user. +@^system dependencies@> + +@<Print the job |history|@>= +case history of +spotless: print_ln('(No errors were found.)'); +harmless_message: print_ln('(Did you see the warning message above?)'); +error_message: print_ln('(Pardon me, but I think I spotted something wrong.)'); +fatal_message: print_ln('(That was a fatal error, my friend.)'); +end {there are no other cases} + +@* Low-level output routines. +The program uses the binary file variable |out_file| for its main output +file; |out_loc| is the number of the byte about to be written next on +|out_file|. + +@<Glob...@>= +@!out_file:byte_file; {the \.{DVI} file we are writing} +@!out_loc:int_32; {where we are about to write, in |out_file|} +@!out_back:int_32; {a back pointer} +@!out_max_v:int_31; {maximum |v| value so far} +@!out_max_h:int_31; {maximum |h| value so far} +@!out_stack:int_16u; {maximum stack depth} +@!out_pages:int_16u; {total number of pages} + +@ @<Set ini...@>= +out_loc:=0; out_back:=-1; +out_max_v:=0; out_max_h:=0; +out_stack:=0; out_pages:=0; + +@ To prepare |out_file| for output, we |rewrite| it. + +@<Open output file(s)@>= +rewrite(out_file); {prepares to write packed bytes to |out_file|} + +@ For some operating systems it may be necessary to close |out_file|. + +@<Close output file(s)@>= + +@ Writing the |out_file| should be done as efficient as possible for a +particular system; on many systems this means that a large number of +bytes will be accumulated in a buffer and is then written from that +buffer to |out_file|. In order to simplify such system dependent changes +we use the \.{WEB} macro |out_byte| to write the next \.{DVI} byte. Here +we give a simple minded definition for this macro in terms of standard +\PASCAL. +@^system dependencies@> +@^optimization@> + +@d out_byte(#) == write(out_file,#) {write next \.{DVI} byte} + +@ The \.{WEB} macro |out_one| is used to write one byte and to update +|out_loc|. + +@d out_one(#) == begin out_byte(#); incr(out_loc); @+ end + +@ First the |out_packet| procedure copies a packet to |out_file|. + +@<Declare typesetting procedures@>= +procedure out_packet(@!p:pckt_pointer); +var k:byte_pointer; {index into |byte_mem|} +begin Incr(out_loc)(pckt_length(p)); +for k:=pckt_start[p] to pckt_start[p+1]-1 do out_byte(bo(byte_mem[k])); +end; + +@ Next are the procedures used to write integer numbers or even complete +\.{DVI} commands to |out_file|; they all keep |out_loc| up to date. + +The |out_four| procedure outputs four bytes in two's complement notation, +without risking arithmetic overflow. + +@<Declare typesetting procedures@>= +procedure out_four(@!x:int_32); {output four bytes} +@!begin_four; comp_four(out_byte); Incr(out_loc)(4); +end; + +@ The |out_char| procedure outputs a |set_char| or \\{set} command or, if +|upd=false|, a |put| command. + +@<Declare typesetting procedures@>= +procedure out_char(@!upd:boolean;@!ext:int_32;@!res:int_32); + {output \\{set} or |put|} +@!begin_char; comp_char(out_one); +end; + +@ The |out_unsigned| procedure outputs a |fnt|, |xxx|, or |fnt_def| +command with its first parameter (normally unsigned); a |fnt| command +is converted into |fnt_num| whenever this is possible. + +@<Declare typesetting procedures@>= +procedure out_unsigned(@!o:eight_bits;@!x:int_32); + {output |fnt_num|, |fnt|, |xxx|, or |fnt_def|} +@!begin_unsigned; comp_unsigned(out_one); +end; + +@ The |out_signed| procedure outputs a movement (|right|, |w|, +|x|, |down|, |y|, or |z|) command with its (signed) parameter. + +@<Declare typesetting procedures@>= +procedure out_signed(@!o:eight_bits;@!x:int_32); + {output |right|, |w|, |x|, |down|, |y|, or |z|} +@!begin_signed; comp_signed(out_one); +end; + +@ For an output font we set |font_type(f):=out_font_type|; in this case +|font_font(f)| is the font number used for font~|f| in |out_file|. +@^font types@> + +The global variable |out_nf| is the number of fonts already used in +|out_file| and the array |out_fnts| contains their internal font numbers; +the current font in |out_file| is called |out_fnt|. + +@<Glob...@>= +@!out_fnts:array[font_number] of font_number; {internal font numbers} +@!out_nf:font_number; {number of fonts used in |out_file|} +@!out_fnt:font_number; {internal font number of current output font} + +@ @<Set init...@>= +out_nf:=0; + +@ @<Print more font usage statistics@>= +print(out_nf:1,' out, '); + +@ The |out_fnt_def| procedure outputs a complete font definition +command. + +@<Declare typesetting procedures@>= +procedure out_fnt_def(@!f:font_number); +var p:pckt_pointer; {the font name packet} +@!k,@!l:byte_pointer; {indices into |byte_mem|} +@!a:eight_bits; {length of area part} +begin out_unsigned(fnt_def1,font_font(f)); out_four(font_check(f)); +out_four(font_scaled(f)); out_four(font_design(f));@/ +p:=font_name(f); k:=pckt_start[p]; l:=pckt_start[p+1]-1; +a:=bo(byte_mem[k]);@/ +Incr(out_loc)(l-k+2); out_byte(a); out_byte(l-k-a); +while k<l do + begin incr(k); out_byte(bo(byte_mem[k])); + end; +end; + +@* Writing the output file. +Here we define the device dependent parts of the typesetting routines +described earlier in this program. + +First we define a few quantities required by the device dependent code +for a real output device in order to demonstrate how they might be +defined and in order to be able to compile \.{DVIcopy} with the device +dependent code included. + +@d h_resolution==300 {horizontal resolution in pixels per inch (dpi)} +@d v_resolution==300 {vertical resolution in pixels per inch (dpi)} + +@d max_h_drift==2 {we insist that |abs(hh-h_pixel_round(h))<=max_h_drift|} +@d max_v_drift==2 {we insist that |abs(vv-v_pixel_round(v))<=max_v_drift|} + +@<Glob...@>= +@!device +@!h_conv:real; {converts \.{DVI} units to horizontal pixels} +@!v_conv:real; {converts \.{DVI} units to vertical pixels} +ecived + +@ These are the local variables (if any) needed for |do_pre|. + +@<OUT: Declare local variables (if any) for |do_pre|@>= +var k:int_15; {general purpose variable} +@!p,@!q,@!r:byte_pointer; {indices into |byte_mem|} +@!comment:packed array[1..comm_length] of char; {preamble comment prefix} + +@ And here is the device dependent code for |do_pre|; the \.{DVI} preamble +comment written to |out_file| is similar to the one produced by \.{GFtoPK}, +but we want to apply our preamble comment prefix only once. + +@<OUT: Process the |pre|@>= +out_one(pre); out_one(dvi_id); +out_four(dvi_num); out_four(dvi_den); out_four(out_mag);@/ +p:=pckt_start[pckt_ptr-1]; q:=byte_ptr; {location of old \.{DVI} comment} +comment:=preamble_comment; pckt_room(comm_length); +for k:=1 to comm_length do append_byte(xord[comment[k]]); +while byte_mem[p]=bi(" ") do incr(p); {remove leading blanks} +if p=q then Decr(byte_ptr)(from_length) +else begin k:=0; + while (k<comm_length)and(byte_mem[p+k]=byte_mem[q+k]) do incr(k); + if k=comm_length then Incr(p)(comm_length); + end; +k:=byte_ptr-p; {total length} +if k>255 then + begin k:=255; q:=p+255-comm_length; {at most 255 bytes} + end; +out_one(k); out_packet(new_packet); flush_packet; +for r:=p to q-1 do out_one(bo(byte_mem[r])); + +@ These are the additional local variables (if any) needed for |do_bop|; +the variables |@!i| and |@!j| are already declared. + +@<OUT: Declare additional local variables |do_bop|@>= +var + +@ And here is the device dependent code for |do_bop|. + +@<OUT: Process a |bop|@>= +out_one(bop); incr(out_pages); +for i:=0 to 9 do out_four(count[i]); +out_four(out_back); out_back:=out_loc-45; +out_fnt:=invalid_font; + +@ These are the local variables (if any) needed for |do_eop|. + +@<OUT: Declare local variables (if any) for |do_eop|@>= + +@ And here is the device dependent code for |do_eop|. + +@<OUT: Process an |eop|@>= +out_one(eop); + +@ These are the local variables (if any) needed for |do_push|. + +@<OUT: Declare local variables (if any) for |do_push|@>= + +@ And here is the device dependent code for |do_push|. + +@<OUT: Process a |push|@>= +if stack_ptr>out_stack then out_stack:=stack_ptr; +out_one(push); + +@ These are the local variables (if any) needed for |do_pop|. + +@<OUT: Declare local variables (if any) for |do_pop|@>= + +@ And here is the device dependent code for |do_pop|. + +@<OUT: Process a |pop|@>= +out_one(pop); + +@ These are the additional local variables (if any) needed for |do_xxx|; +the variable |@!p|, the pointer to the packet containing the special +string, is already declared. + +@<OUT: Declare additional local variables for |do_xxx|@>= +var + +@ And here is the device dependent code for |do_xxx|. + +@<OUT: Process an |xxx|@>= +out_unsigned(xxx1,pckt_length(p)); out_packet(p); + +@ These are the local variables (if any) needed for |do_right|. + +@<OUT: Declare local variables (if any) for |do_right|@>= + +@ And here is the device dependent code for |do_right|. + +@<OUT: Process a |right| or |w| or |x|@>= +if cur_class<right_cl then out_one(cur_cmd) {|w0| or |x0|} +else out_signed(dvi_right_cmd[cur_class],cur_parm); {|right|, |w|, or |x|} + +@ Here we update the |out_max_h| value. + +@<OUT: Move right@>= +if abs(cur_h)>out_max_h then out_max_h:=abs(cur_h); + +@ These are the local variables (if any) needed for |do_down|. + +@<OUT: Declare local variables (if any) for |do_down|@>= + +@ And here is the device dependent code for |do_down|. + +@<OUT: Process a |down| or |y| or |z|@>= +if cur_class<down_cl then out_one(cur_cmd) {|y0| or |z0|} +else out_signed(dvi_down_cmd[cur_class],cur_parm); {|down|, |y|, or |z|} + +@ Here we update the |out_max_v| value. + +@<OUT: Move down@>= +if abs(cur_v)>out_max_v then out_max_v:=abs(cur_v); + +@ These are the local variables (if any) needed for |do_width|. + +@<OUT: Declare local variables (if any) for |do_width|@>= + +@ And here is the device dependent code for |do_width|. + +@<OUT: Typeset a |width|@>= +out_one(set_rule); +out_four(width_dimen); out_four(cur_h_dimen); + +@ These are the additional local variables (if any) needed for |do_rule|; +the variable |@!visible| is already declared. + +@<OUT: Declare additional local variables |do_rule|@>= +var + +@ And here is the device dependent code for |do_rule|. + +@<OUT: Typeset a visible |rule|@>= +out_one(dvi_rule_cmd[cur_upd]); +out_four(cur_v_dimen); out_four(cur_h_dimen); + +@ @<OUT: Typeset an invisible |rule|@>= +@<OUT: Typeset a visible |rule|@> + +@ These are the additional local variables (if any) needed for |do_font|; +the variable |@!p| is already declared. + +@<OUT: Declare additional local variables for |do_font|@>= +var + +@ And here is the device dependent code for |do_font|; if the \.{VF} file +for a font could not be found, we simply assume this must be a real font. + +@<OUT: Look for a font file before trying to read the \.{VF} file; + if found |goto done|@>= + +@ @<OUT: Look for a font file after trying to read the \.{VF} file@>= +if(out_nf>=max_fonts) then overflow(str_fonts,max_fonts); +print('OUT: font ',cur_fnt:1); d_print(' => ',out_nf:1); +print_font(cur_fnt); +d_print(' at ',font_scaled(cur_fnt):1,' DVI units'); print_ln('.'); +font_type(cur_fnt):=out_font_type; font_font(cur_fnt):=out_nf; +out_fnts[out_nf]:=cur_fnt; incr(out_nf); +out_fnt_def(cur_fnt); + +@ And here is some device dependent code used before each character. + +@<OUT: Prepare to use font |cur_fnt|@>= + +@ These are the local variables (if any) needed for |do_char|. + +@<OUT: Declare local variables (if any) for |do_char|@>= + +@ And here is the device dependent code for |do_char|. + +@<OUT: Typeset a |char|@>= +@!debug if font_type(cur_fnt)<>out_font_type then confusion(str_fonts); +gubed @; +if cur_fnt<>out_fnt then + begin out_unsigned(fnt1,font_font(cur_fnt)); out_fnt:=cur_fnt; + end; +out_char(cur_upd,cur_ext,cur_res); + +@ If the program terminates in the middle of a page, we write as many +|pop|s as necessary and one |eop|. + +@<OUT: Finish incomplete page@>= +begin while stack_ptr>0 do + begin out_one(pop); decr(stack_ptr); + end; + out_one(eop); +end + +@ If the output file has been started, we write the postamble; in +addition we print the number of bytes and pages written to |out_file|. + +@<OUT: Finish output file(s)@>= +if out_loc>0 then + begin @<OUT: Write the postamble@>; + k:=7-((out_loc-1) mod 4); {the number of |dvi_pad| bytes} + while k>0 do + begin out_one(dvi_pad); decr(k); + end; + print('OUT file: ',out_loc:1,' bytes, ',out_pages:1,' page'); + if out_pages<>1 then print('s'); + end +else print('OUT file: no output'); +print_ln(' written.'); +if out_pages=0 then mark_harmless; + +@ Here we simply write the values accumulated during the \.{DVI} output. + +@<OUT: Write the postamble@>= +out_one(post); out_four(out_back); out_back:=out_loc-5;@/ +out_four(dvi_num); out_four(dvi_den); out_four(out_mag);@/ +out_four(out_max_v); out_four(out_max_h);@/ +out_one(out_stack div @"100); out_one(out_stack mod @"100);@/ +out_one(out_pages div @"100); out_one(out_pages mod @"100);@/ +k:=out_nf; +while k>0 do + begin decr(k); out_fnt_def(out_fnts[k]); + end; +out_one(post_post); out_four(out_back);@/ +out_one(dvi_id) + +@ Here we could print more memory usage statistics; this possibility is, +however, not used for \.{DVIcopy}. + +@<Print more memory usage statistics@>= + +@* System-dependent changes. +This section should be replaced, if necessary, by changes to the program +that are necessary to make \.{DVIcopy} work at a particular installation. +It is usually best to design your change file so that all changes to +previous sections preserve the section numbering; then everybody's version +will be consistent with the printed program. More extensive changes, +which introduce new sections, can be inserted here; then only the index +itself will get a new section number. +@^system dependencies@> + +@* Index. +Pointers to error messages appear here together with the section numbers +where each ident\-i\-fier is used. + |