summaryrefslogtreecommitdiff
path: root/Build/source/libs/poppler/poppler-src/INSTALL
diff options
context:
space:
mode:
Diffstat (limited to 'Build/source/libs/poppler/poppler-src/INSTALL')
-rw-r--r--Build/source/libs/poppler/poppler-src/INSTALL262
1 files changed, 65 insertions, 197 deletions
diff --git a/Build/source/libs/poppler/poppler-src/INSTALL b/Build/source/libs/poppler/poppler-src/INSTALL
index 56b077d6a0b..a38a8c009a5 100644
--- a/Build/source/libs/poppler/poppler-src/INSTALL
+++ b/Build/source/libs/poppler/poppler-src/INSTALL
@@ -1,236 +1,104 @@
Installation Instructions
*************************
-Copyright (C) 1994, 1995, 1996, 1999, 2000, 2001, 2002, 2004, 2005 Free
-Software Foundation, Inc.
-
-This file is free documentation; the Free Software Foundation gives
-unlimited permission to copy, distribute and modify it.
-
Basic Installation
==================
-These are generic installation instructions.
-
- The `configure' shell script attempts to guess correct values for
-various system-dependent variables used during compilation. It uses
-those values to create a `Makefile' in each directory of the package.
-It may also create one or more `.h' files containing system-dependent
-definitions. Finally, it creates a shell script `config.status' that
-you can run in the future to recreate the current configuration, and a
-file `config.log' containing compiler output (useful mainly for
-debugging `configure').
-
- It can also use an optional file (typically called `config.cache'
-and enabled with `--cache-file=config.cache' or simply `-C') that saves
-the results of its tests to speed up reconfiguring. (Caching is
-disabled by default to prevent problems with accidental use of stale
-cache files.)
-
- If you need to do unusual things to compile the package, please try
-to figure out how `configure' could check whether to do them, and mail
-diffs or instructions to the address given in the `README' so they can
-be considered for the next release. If you are using the cache, and at
-some point `config.cache' contains results you don't want to keep, you
-may remove or edit it.
-
- The file `configure.ac' (or `configure.in') is used to create
-`configure' by a program called `autoconf'. You only need
-`configure.ac' if you want to change it or regenerate `configure' using
-a newer version of `autoconf'.
-
-The simplest way to compile this package is:
-
- 1. `cd' to the directory containing the package's source code and type
- `./configure' to configure the package for your system. If you're
- using `csh' on an old version of System V, you might need to type
- `sh ./configure' instead to prevent `csh' from trying to execute
- `configure' itself.
-
- Running `configure' takes awhile. While running, it prints some
- messages telling which features it is checking for.
-
- 2. Type `make' to compile the package.
-
- 3. Optionally, type `make check' to run any self-tests that come with
- the package.
-
- 4. Type `make install' to install the programs and any data files and
- documentation.
-
- 5. You can remove the program binaries and object files from the
- source code directory by typing `make clean'. To also remove the
- files that `configure' created (so you can compile the package for
- a different kind of computer), type `make distclean'. There is
- also a `make maintainer-clean' target, but that is intended mainly
- for the package's developers. If you use it, you may have to get
- all sorts of other programs in order to regenerate files that came
- with the distribution.
-
-Compilers and Options
-=====================
-
-Some systems require unusual options for compilation or linking that the
-`configure' script does not know about. Run `./configure --help' for
-details on some of the pertinent environment variables.
-
- You can give `configure' initial values for configuration parameters
-by setting variables in the command line or in the environment. Here
-is an example:
-
- ./configure CC=c89 CFLAGS=-O2 LIBS=-lposix
-
- *Note Defining Variables::, for more details.
-
-Compiling For Multiple Architectures
-====================================
-
-You can compile the package for more than one kind of computer at the
-same time, by placing the object files for each architecture in their
-own directory. To do this, you must use a version of `make' that
-supports the `VPATH' variable, such as GNU `make'. `cd' to the
-directory where you want the object files and executables to go and run
-the `configure' script. `configure' automatically checks for the
-source code in the directory that `configure' is in and in `..'.
-
- If you have to use a `make' that does not support the `VPATH'
-variable, you have to compile the package for one architecture at a
-time in the source code directory. After you have installed the
-package for one architecture, use `make distclean' before reconfiguring
-for another architecture.
-
-Installation Names
-==================
+mkdir build
+cd build
+cmake ..
+make
+make install
-By default, `make install' will install the package's files in
-`/usr/local/bin', `/usr/local/man', etc. You can specify an
-installation prefix other than `/usr/local' by giving `configure' the
-option `--prefix=PREFIX'.
- You can specify separate installation prefixes for
-architecture-specific files and architecture-independent files. If you
-give `configure' the option `--exec-prefix=PREFIX', the package will
-use PREFIX as the prefix for installing programs and libraries.
-Documentation and other data files will still use the regular prefix.
+CMake configuration options can be set using the -D option. eg
- In addition, if you use an unusual directory layout you can give
-options like `--bindir=DIR' to specify different values for particular
-kinds of files. Run `configure --help' for a list of the directories
-you can set and what kinds of files go in them.
+ cmake .. -DCMAKE_INSTALL_PREFIX=/usr/local -DCMAKE_BUILD_TYPE=release
- If the package supports it, you can cause programs to be installed
-with an extra prefix or suffix on their names by giving `configure' the
-option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
-Optional Features
-=================
+Build Options
+=============
-Some packages pay attention to `--enable-FEATURE' options to
-`configure', where FEATURE indicates an optional part of the package.
-They may also pay attention to `--with-PACKAGE' options, where PACKAGE
-is something like `gnu-as' or `x' (for the X Window System). The
-`README' should mention any `--enable-' and `--with-' options that the
-package recognizes.
+Set install prefix:
- For packages that use the X Window System, `configure' can usually
-find the X include and library files automatically, but if it doesn't,
-you can use the `configure' options `--x-includes=DIR' and
-`--x-libraries=DIR' to specify their locations.
+ -DCMAKE_INSTALL_PREFIX=<path>
-Specifying the System Type
-==========================
+Set build type. This sets the standard compiler flags for the build
+type.
-There may be some features `configure' cannot figure out automatically,
-but needs to determine by the type of machine the package will run on.
-Usually, assuming the package is built to be run on the _same_
-architectures, `configure' can figure that out, but if it prints a
-message saying it cannot guess the machine type, give it the
-`--build=TYPE' option. TYPE can either be a short name for the system
-type, such as `sun4', or a canonical name which has the form:
+ -DCMAKE_BUILD_TYPE=debug or -DCMAKE_BUILD_TYPE=release
- CPU-COMPANY-SYSTEM
+Set compiler flags:
-where SYSTEM can have one of these forms:
+ -DCMAKE_CXX_FLAGS=<flags> or set CXXFLAGS environment variable
- OS KERNEL-OS
+Set linker flags:
- See the file `config.sub' for the possible values of each field. If
-`config.sub' isn't included in this package, then this package doesn't
-need to know the machine type.
+ -DCMAKE_LD_FLAGS=<flags> or set LDFLAGS environment variable
- If you are _building_ compiler tools for cross-compiling, you should
-use the `--target=TYPE' option to select the type of system they will
-produce code for.
- If you want to _use_ a cross compiler, that generates code for a
-platform different from the build platform, you should specify the
-"host" platform (i.e., that on which the generated programs will
-eventually be run) with `--host=TYPE'.
+Optional Features
+=================
-Sharing Defaults
-================
+ -D<FEATURE>=<ON|OFF>
-If you want to set default values for `configure' scripts to share, you
-can create a site shell script called `config.site' that gives default
-values for variables like `CC', `cache_file', and `prefix'.
-`configure' looks for `PREFIX/share/config.site' if it exists, then
-`PREFIX/etc/config.site' if it exists. Or, you can set the
-`CONFIG_SITE' environment variable to the location of the site script.
-A warning: not all `configure' scripts look for a site script.
+eg
-Defining Variables
-==================
+ -DENABLE_SPLASH=ON -DBUILD_GTK_TESTS=OFF
+
+A list of all options can be display with the commmand:
+
+ egrep '^ *(option|set.*STRING)' CMakeLists.txt
-Variables not defined in a site shell script can be set in the
-environment passed to `configure'. However, some packages may run
-configure again during the build, and the customized values of these
-variables may be lost. In order to avoid this problem, you should set
-them in the `configure' command line, using `VAR=value'. For example:
+Alternatively, the options can be edited by running "ccmake ." in the
+build directory.
- ./configure CC=/usr/local2/bin/gcc
-causes the specified `gcc' to be used as the C compiler (unless it is
-overridden in the site shell script). Here is a another example:
+Cross Compiling
+===============
- /bin/bash ./configure CONFIG_SHELL=/bin/bash
+A toolchain file is required to specify the target specific compiler
+tools. Run cmake with the option:
-Here the `CONFIG_SHELL=/bin/bash' operand causes subsequent
-configuration-related scripts to be executed by `/bin/bash'.
+ -DCMAKE_TOOLCHAIN_FILE=<Toolchain file>
-`configure' Invocation
-======================
+A sample toolchain for a 64-bit mingw build is shown below. Replace
+/path/to/win/root with the install prefix for the target environment.
-`configure' recognizes the following options to control how it operates.
+ set(CMAKE_SYSTEM_NAME Windows)
+ set(CMAKE_C_COMPILER x86_64-w64-mingw32-gcc)
+ set(CMAKE_CXX_COMPILER x86_64-w64-mingw32-g++)
+ set(CMAKE_RC_COMPILER x86_64-w64-mingw32-windres)
+ set(CMAKE_FIND_ROOT_PATH /usr/x86_64-w64-mingw32 /path/to/win/root )
+ set(CMAKE_FIND_ROOT_PATH_MODE_PROGRAM NEVER)
+ set(CMAKE_FIND_ROOT_PATH_MODE_LIBRARY ONLY)
+ set(CMAKE_FIND_ROOT_PATH_MODE_INCLUDE ONLY)
+
+
+Debugging Options
+=================
-`--help'
-`-h'
- Print a summary of the options to `configure', and exit.
+Debug Build Types
+-----------------
+Release build with debugging information:
+ -DCMAKE_BUILD_TYPE=relwithdebinfo
-`--version'
-`-V'
- Print the version of Autoconf used to generate the `configure'
- script, and exit.
+Debug build with optimization except for some code re-ordering optimizations:
+ -DCMAKE_BUILD_TYPE=debug
-`--cache-file=FILE'
- Enable the cache: use and save the results of the tests in FILE,
- traditionally `config.cache'. FILE defaults to `/dev/null' to
- disable caching.
+Debug build with no optimization:
+ -DCMAKE_BUILD_TYPE=debugfull
-`--config-cache'
-`-C'
- Alias for `--cache-file=config.cache'.
+Release build with debugging and profiling information:
+ -DCMAKE_BUILD_TYPE=profile
-`--quiet'
-`--silent'
-`-q'
- Do not print messages saying which checks are being made. To
- suppress all normal output, redirect it to `/dev/null' (any error
- messages will still be shown).
-`--srcdir=DIR'
- Look for the package's source code in directory DIR. Usually
- `configure' can determine that directory automatically.
+Address Sanitizer
+-----------------
+Ensure the extra cmake modules are available (may be a separate
+package) then use -DECM_ENABLE_SANITIZERS to specify the santizers. eg
-`configure' also accepts some other, not widely useful, options. Run
-`configure --help' for more details.
+ -DECM_ENABLE_SANITIZERS='address;leak;undefined'
+Some options may only be available with clang. Use
+-DCMAKE_CXX_COMPILER=clang++ to build with clang.