summaryrefslogtreecommitdiff
path: root/Build/source/libs/gmp/gmp-6.0.0/mpn/x86/k6/mul_basecase.asm
diff options
context:
space:
mode:
Diffstat (limited to 'Build/source/libs/gmp/gmp-6.0.0/mpn/x86/k6/mul_basecase.asm')
-rw-r--r--Build/source/libs/gmp/gmp-6.0.0/mpn/x86/k6/mul_basecase.asm612
1 files changed, 612 insertions, 0 deletions
diff --git a/Build/source/libs/gmp/gmp-6.0.0/mpn/x86/k6/mul_basecase.asm b/Build/source/libs/gmp/gmp-6.0.0/mpn/x86/k6/mul_basecase.asm
new file mode 100644
index 00000000000..7030001c3f2
--- /dev/null
+++ b/Build/source/libs/gmp/gmp-6.0.0/mpn/x86/k6/mul_basecase.asm
@@ -0,0 +1,612 @@
+dnl AMD K6 mpn_mul_basecase -- multiply two mpn numbers.
+
+dnl Copyright 1999-2003 Free Software Foundation, Inc.
+
+dnl This file is part of the GNU MP Library.
+dnl
+dnl The GNU MP Library is free software; you can redistribute it and/or modify
+dnl it under the terms of either:
+dnl
+dnl * the GNU Lesser General Public License as published by the Free
+dnl Software Foundation; either version 3 of the License, or (at your
+dnl option) any later version.
+dnl
+dnl or
+dnl
+dnl * the GNU General Public License as published by the Free Software
+dnl Foundation; either version 2 of the License, or (at your option) any
+dnl later version.
+dnl
+dnl or both in parallel, as here.
+dnl
+dnl The GNU MP Library is distributed in the hope that it will be useful, but
+dnl WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
+dnl or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
+dnl for more details.
+dnl
+dnl You should have received copies of the GNU General Public License and the
+dnl GNU Lesser General Public License along with the GNU MP Library. If not,
+dnl see https://www.gnu.org/licenses/.
+
+include(`../config.m4')
+
+
+C K6: approx 9.0 cycles per cross product on 30x30 limbs (with 16 limbs/loop
+C unrolling).
+
+
+
+dnl K6: UNROLL_COUNT cycles/product (approx)
+dnl 8 9.75
+dnl 16 9.3
+dnl 32 9.3
+dnl Maximum possible with the current code is 32.
+dnl
+dnl With 16 the inner unrolled loop fits exactly in a 256 byte block, which
+dnl might explain it's good performance.
+
+deflit(UNROLL_COUNT, 16)
+
+
+C void mpn_mul_basecase (mp_ptr wp,
+C mp_srcptr xp, mp_size_t xsize,
+C mp_srcptr yp, mp_size_t ysize);
+C
+C Calculate xp,xsize multiplied by yp,ysize, storing the result in
+C wp,xsize+ysize.
+C
+C This routine is essentially the same as mpn/generic/mul_basecase.c, but
+C it's faster because it does most of the mpn_addmul_1() entry code only
+C once. The saving is about 10-20% on typical sizes coming from the
+C Karatsuba multiply code.
+C
+C Enhancements:
+C
+C The mul_1 loop is about 8.5 c/l, which is slower than mpn_mul_1 at 6.25
+C c/l. Could call mpn_mul_1 when ysize is big enough to make it worthwhile.
+C
+C The main unrolled addmul loop could be shared by mpn_addmul_1, using some
+C extra stack setups and maybe 2 or 3 wasted cycles at the end. Code saving
+C would be 256 bytes.
+
+ifdef(`PIC',`
+deflit(UNROLL_THRESHOLD, 8)
+',`
+deflit(UNROLL_THRESHOLD, 8)
+')
+
+defframe(PARAM_YSIZE,20)
+defframe(PARAM_YP, 16)
+defframe(PARAM_XSIZE,12)
+defframe(PARAM_XP, 8)
+defframe(PARAM_WP, 4)
+
+ TEXT
+ ALIGN(32)
+PROLOGUE(mpn_mul_basecase)
+deflit(`FRAME',0)
+
+ movl PARAM_XSIZE, %ecx
+ movl PARAM_YP, %eax
+
+ movl PARAM_XP, %edx
+ movl (%eax), %eax C yp low limb
+
+ cmpl $2, %ecx
+ ja L(xsize_more_than_two_limbs)
+ je L(two_by_something)
+
+
+ C one limb by one limb
+
+ movl (%edx), %edx C xp low limb
+ movl PARAM_WP, %ecx
+
+ mull %edx
+
+ movl %eax, (%ecx)
+ movl %edx, 4(%ecx)
+ ret
+
+
+C -----------------------------------------------------------------------------
+L(two_by_something):
+ decl PARAM_YSIZE
+ pushl %ebx
+deflit(`FRAME',4)
+
+ movl PARAM_WP, %ebx
+ pushl %esi
+deflit(`FRAME',8)
+
+ movl %eax, %ecx C yp low limb
+ movl (%edx), %eax C xp low limb
+
+ movl %edx, %esi C xp
+ jnz L(two_by_two)
+
+
+ C two limbs by one limb
+
+ mull %ecx
+
+ movl %eax, (%ebx)
+ movl 4(%esi), %eax
+
+ movl %edx, %esi C carry
+
+ mull %ecx
+
+ addl %eax, %esi
+ movl %esi, 4(%ebx)
+
+ adcl $0, %edx
+
+ movl %edx, 8(%ebx)
+ popl %esi
+
+ popl %ebx
+ ret
+
+
+
+C -----------------------------------------------------------------------------
+ ALIGN(16)
+L(two_by_two):
+ C eax xp low limb
+ C ebx wp
+ C ecx yp low limb
+ C edx
+ C esi xp
+ C edi
+ C ebp
+deflit(`FRAME',8)
+
+ mull %ecx C xp[0] * yp[0]
+
+ push %edi
+deflit(`FRAME',12)
+ movl %eax, (%ebx)
+
+ movl 4(%esi), %eax
+ movl %edx, %edi C carry, for wp[1]
+
+ mull %ecx C xp[1] * yp[0]
+
+ addl %eax, %edi
+ movl PARAM_YP, %ecx
+
+ adcl $0, %edx
+
+ movl %edi, 4(%ebx)
+ movl 4(%ecx), %ecx C yp[1]
+
+ movl 4(%esi), %eax C xp[1]
+ movl %edx, %edi C carry, for wp[2]
+
+ mull %ecx C xp[1] * yp[1]
+
+ addl %eax, %edi
+
+ adcl $0, %edx
+
+ movl (%esi), %eax C xp[0]
+ movl %edx, %esi C carry, for wp[3]
+
+ mull %ecx C xp[0] * yp[1]
+
+ addl %eax, 4(%ebx)
+ adcl %edx, %edi
+ adcl $0, %esi
+
+ movl %edi, 8(%ebx)
+ popl %edi
+
+ movl %esi, 12(%ebx)
+ popl %esi
+
+ popl %ebx
+ ret
+
+
+C -----------------------------------------------------------------------------
+ ALIGN(16)
+L(xsize_more_than_two_limbs):
+
+C The first limb of yp is processed with a simple mpn_mul_1 style loop
+C inline. Unrolling this doesn't seem worthwhile since it's only run once
+C (whereas the addmul below is run ysize-1 many times). A call to the
+C actual mpn_mul_1 will be slowed down by the call and parameter pushing and
+C popping, and doesn't seem likely to be worthwhile on the typical 10-20
+C limb operations the Karatsuba code calls here with.
+
+ C eax yp[0]
+ C ebx
+ C ecx xsize
+ C edx xp
+ C esi
+ C edi
+ C ebp
+deflit(`FRAME',0)
+
+ pushl %edi defframe_pushl(SAVE_EDI)
+ pushl %ebp defframe_pushl(SAVE_EBP)
+
+ movl PARAM_WP, %edi
+ pushl %esi defframe_pushl(SAVE_ESI)
+
+ movl %eax, %ebp
+ pushl %ebx defframe_pushl(SAVE_EBX)
+
+ leal (%edx,%ecx,4), %ebx C xp end
+ xorl %esi, %esi
+
+ leal (%edi,%ecx,4), %edi C wp end of mul1
+ negl %ecx
+
+
+L(mul1):
+ C eax scratch
+ C ebx xp end
+ C ecx counter, negative
+ C edx scratch
+ C esi carry
+ C edi wp end of mul1
+ C ebp multiplier
+
+ movl (%ebx,%ecx,4), %eax
+
+ mull %ebp
+
+ addl %esi, %eax
+ movl $0, %esi
+
+ adcl %edx, %esi
+
+ movl %eax, (%edi,%ecx,4)
+ incl %ecx
+
+ jnz L(mul1)
+
+
+ movl PARAM_YSIZE, %edx
+ movl %esi, (%edi) C final carry
+
+ movl PARAM_XSIZE, %ecx
+ decl %edx
+
+ jnz L(ysize_more_than_one_limb)
+
+ popl %ebx
+ popl %esi
+ popl %ebp
+ popl %edi
+ ret
+
+
+L(ysize_more_than_one_limb):
+ cmpl $UNROLL_THRESHOLD, %ecx
+ movl PARAM_YP, %eax
+
+ jae L(unroll)
+
+
+C -----------------------------------------------------------------------------
+C Simple addmul loop.
+C
+C Using ebx and edi pointing at the ends of their respective locations saves
+C a couple of instructions in the outer loop. The inner loop is still 11
+C cycles, the same as the simple loop in aorsmul_1.asm.
+
+ C eax yp
+ C ebx xp end
+ C ecx xsize
+ C edx ysize-1
+ C esi
+ C edi wp end of mul1
+ C ebp
+
+ movl 4(%eax), %ebp C multiplier
+ negl %ecx
+
+ movl %ecx, PARAM_XSIZE C -xsize
+ xorl %esi, %esi C initial carry
+
+ leal 4(%eax,%edx,4), %eax C yp end
+ negl %edx
+
+ movl %eax, PARAM_YP
+ movl %edx, PARAM_YSIZE
+
+ jmp L(simple_outer_entry)
+
+
+ C aligning here saves a couple of cycles
+ ALIGN(16)
+L(simple_outer_top):
+ C edx ysize counter, negative
+
+ movl PARAM_YP, %eax C yp end
+ xorl %esi, %esi C carry
+
+ movl PARAM_XSIZE, %ecx C -xsize
+ movl %edx, PARAM_YSIZE
+
+ movl (%eax,%edx,4), %ebp C yp limb multiplier
+L(simple_outer_entry):
+ addl $4, %edi
+
+
+L(simple_inner):
+ C eax scratch
+ C ebx xp end
+ C ecx counter, negative
+ C edx scratch
+ C esi carry
+ C edi wp end of this addmul
+ C ebp multiplier
+
+ movl (%ebx,%ecx,4), %eax
+
+ mull %ebp
+
+ addl %esi, %eax
+ movl $0, %esi
+
+ adcl $0, %edx
+ addl %eax, (%edi,%ecx,4)
+ adcl %edx, %esi
+
+ incl %ecx
+ jnz L(simple_inner)
+
+
+ movl PARAM_YSIZE, %edx
+ movl %esi, (%edi)
+
+ incl %edx
+ jnz L(simple_outer_top)
+
+
+ popl %ebx
+ popl %esi
+ popl %ebp
+ popl %edi
+ ret
+
+
+C -----------------------------------------------------------------------------
+C Unrolled loop.
+C
+C The unrolled inner loop is the same as in aorsmul_1.asm, see that code for
+C some comments.
+C
+C VAR_COUNTER is for the inner loop, running from VAR_COUNTER_INIT down to
+C 0, inclusive.
+C
+C VAR_JMP is the computed jump into the unrolled loop.
+C
+C PARAM_XP and PARAM_WP get offset appropriately for where the unrolled loop
+C is entered.
+C
+C VAR_XP_LOW is the least significant limb of xp, which is needed at the
+C start of the unrolled loop. This can't just be fetched through the xp
+C pointer because of the offset applied to it.
+C
+C PARAM_YSIZE is the outer loop counter, going from -(ysize-1) up to -1,
+C inclusive.
+C
+C PARAM_YP is offset appropriately so that the PARAM_YSIZE counter can be
+C added to give the location of the next limb of yp, which is the multiplier
+C in the unrolled loop.
+C
+C PARAM_WP is similarly offset so that the PARAM_YSIZE counter can be added
+C to give the starting point in the destination for each unrolled loop (this
+C point is one limb upwards for each limb of yp processed).
+C
+C Having PARAM_YSIZE count negative to zero means it's not necessary to
+C store new values of PARAM_YP and PARAM_WP on each loop. Those values on
+C the stack remain constant and on each loop an leal adjusts them with the
+C PARAM_YSIZE counter value.
+
+
+defframe(VAR_COUNTER, -20)
+defframe(VAR_COUNTER_INIT, -24)
+defframe(VAR_JMP, -28)
+defframe(VAR_XP_LOW, -32)
+deflit(VAR_STACK_SPACE, 16)
+
+dnl For some strange reason using (%esp) instead of 0(%esp) is a touch
+dnl slower in this code, hence the defframe empty-if-zero feature is
+dnl disabled.
+dnl
+dnl If VAR_COUNTER is at (%esp), the effect is worse. In this case the
+dnl unrolled loop is 255 instead of 256 bytes, but quite how this affects
+dnl anything isn't clear.
+dnl
+define(`defframe_empty_if_zero_disabled',1)
+
+L(unroll):
+ C eax yp (not used)
+ C ebx xp end (not used)
+ C ecx xsize
+ C edx ysize-1
+ C esi
+ C edi wp end of mul1 (not used)
+ C ebp
+deflit(`FRAME', 16)
+
+ leal -2(%ecx), %ebp C one limb processed at start,
+ decl %ecx C and ebp is one less
+
+ shrl $UNROLL_LOG2, %ebp
+ negl %ecx
+
+ subl $VAR_STACK_SPACE, %esp
+deflit(`FRAME', 16+VAR_STACK_SPACE)
+ andl $UNROLL_MASK, %ecx
+
+ movl %ecx, %esi
+ shll $4, %ecx
+
+ movl %ebp, VAR_COUNTER_INIT
+ negl %esi
+
+ C 15 code bytes per limb
+ifdef(`PIC',`
+ call L(pic_calc)
+L(unroll_here):
+',`
+ leal L(unroll_entry) (%ecx,%esi,1), %ecx
+')
+
+ movl PARAM_XP, %ebx
+ movl %ebp, VAR_COUNTER
+
+ movl PARAM_WP, %edi
+ movl %ecx, VAR_JMP
+
+ movl (%ebx), %eax
+ leal 4(%edi,%esi,4), %edi C wp adjust for unrolling and mul1
+
+ leal (%ebx,%esi,4), %ebx C xp adjust for unrolling
+
+ movl %eax, VAR_XP_LOW
+
+ movl %ebx, PARAM_XP
+ movl PARAM_YP, %ebx
+
+ leal (%edi,%edx,4), %ecx C wp adjust for ysize indexing
+ movl 4(%ebx), %ebp C multiplier (yp second limb)
+
+ leal 4(%ebx,%edx,4), %ebx C yp adjust for ysize indexing
+
+ movl %ecx, PARAM_WP
+
+ leal 1(%esi), %ecx C adjust parity for decl %ecx above
+
+ movl %ebx, PARAM_YP
+ negl %edx
+
+ movl %edx, PARAM_YSIZE
+ jmp L(unroll_outer_entry)
+
+
+ifdef(`PIC',`
+L(pic_calc):
+ C See mpn/x86/README about old gas bugs
+ leal (%ecx,%esi,1), %ecx
+ addl $L(unroll_entry)-L(unroll_here), %ecx
+ addl (%esp), %ecx
+ ret_internal
+')
+
+
+C -----------------------------------------------------------------------------
+ C Aligning here saves a couple of cycles per loop. Using 32 doesn't
+ C cost any extra space, since the inner unrolled loop below is
+ C aligned to 32.
+ ALIGN(32)
+L(unroll_outer_top):
+ C edx ysize
+
+ movl PARAM_YP, %eax
+ movl %edx, PARAM_YSIZE C incremented ysize counter
+
+ movl PARAM_WP, %edi
+
+ movl VAR_COUNTER_INIT, %ebx
+ movl (%eax,%edx,4), %ebp C next multiplier
+
+ movl PARAM_XSIZE, %ecx
+ leal (%edi,%edx,4), %edi C adjust wp for where we are in yp
+
+ movl VAR_XP_LOW, %eax
+ movl %ebx, VAR_COUNTER
+
+L(unroll_outer_entry):
+ mull %ebp
+
+ C using testb is a tiny bit faster than testl
+ testb $1, %cl
+
+ movl %eax, %ecx C low carry
+ movl VAR_JMP, %eax
+
+ movl %edx, %esi C high carry
+ movl PARAM_XP, %ebx
+
+ jnz L(unroll_noswap)
+ movl %ecx, %esi C high,low carry other way around
+
+ movl %edx, %ecx
+L(unroll_noswap):
+
+ jmp *%eax
+
+
+
+C -----------------------------------------------------------------------------
+ ALIGN(32)
+L(unroll_top):
+ C eax scratch
+ C ebx xp
+ C ecx carry low
+ C edx scratch
+ C esi carry high
+ C edi wp
+ C ebp multiplier
+ C VAR_COUNTER loop counter
+ C
+ C 15 code bytes each limb
+
+ leal UNROLL_BYTES(%edi), %edi
+
+L(unroll_entry):
+deflit(CHUNK_COUNT,2)
+forloop(`i', 0, UNROLL_COUNT/CHUNK_COUNT-1, `
+ deflit(`disp0', eval(i*CHUNK_COUNT*4))
+ deflit(`disp1', eval(disp0 + 4))
+ deflit(`disp2', eval(disp1 + 4))
+
+ movl disp1(%ebx), %eax
+ mull %ebp
+Zdisp( addl, %ecx, disp0,(%edi))
+ adcl %eax, %esi
+ movl %edx, %ecx
+ jadcl0( %ecx)
+
+ movl disp2(%ebx), %eax
+ mull %ebp
+ addl %esi, disp1(%edi)
+ adcl %eax, %ecx
+ movl %edx, %esi
+ jadcl0( %esi)
+')
+
+ decl VAR_COUNTER
+ leal UNROLL_BYTES(%ebx), %ebx
+
+ jns L(unroll_top)
+
+
+ movl PARAM_YSIZE, %edx
+ addl %ecx, UNROLL_BYTES(%edi)
+
+ adcl $0, %esi
+
+ incl %edx
+ movl %esi, UNROLL_BYTES+4(%edi)
+
+ jnz L(unroll_outer_top)
+
+
+ movl SAVE_ESI, %esi
+ movl SAVE_EBP, %ebp
+ movl SAVE_EDI, %edi
+ movl SAVE_EBX, %ebx
+
+ addl $FRAME, %esp
+ ret
+
+EPILOGUE()