diff options
Diffstat (limited to 'Build/source/libs/freetype2/freetype-2.4.11/src/cff/cffgload.c')
-rw-r--r-- | Build/source/libs/freetype2/freetype-2.4.11/src/cff/cffgload.c | 2972 |
1 files changed, 2972 insertions, 0 deletions
diff --git a/Build/source/libs/freetype2/freetype-2.4.11/src/cff/cffgload.c b/Build/source/libs/freetype2/freetype-2.4.11/src/cff/cffgload.c new file mode 100644 index 00000000000..84847fda570 --- /dev/null +++ b/Build/source/libs/freetype2/freetype-2.4.11/src/cff/cffgload.c @@ -0,0 +1,2972 @@ +/***************************************************************************/ +/* */ +/* cffgload.c */ +/* */ +/* OpenType Glyph Loader (body). */ +/* */ +/* Copyright 1996-2012 by */ +/* David Turner, Robert Wilhelm, and Werner Lemberg. */ +/* */ +/* This file is part of the FreeType project, and may only be used, */ +/* modified, and distributed under the terms of the FreeType project */ +/* license, LICENSE.TXT. By continuing to use, modify, or distribute */ +/* this file you indicate that you have read the license and */ +/* understand and accept it fully. */ +/* */ +/***************************************************************************/ + + +#include <ft2build.h> +#include FT_INTERNAL_DEBUG_H +#include FT_INTERNAL_STREAM_H +#include FT_INTERNAL_SFNT_H +#include FT_OUTLINE_H + +#include "cffobjs.h" +#include "cffload.h" +#include "cffgload.h" + +#include "cfferrs.h" + + + /*************************************************************************/ + /* */ + /* The macro FT_COMPONENT is used in trace mode. It is an implicit */ + /* parameter of the FT_TRACE() and FT_ERROR() macros, used to print/log */ + /* messages during execution. */ + /* */ +#undef FT_COMPONENT +#define FT_COMPONENT trace_cffgload + + + typedef enum CFF_Operator_ + { + cff_op_unknown = 0, + + cff_op_rmoveto, + cff_op_hmoveto, + cff_op_vmoveto, + + cff_op_rlineto, + cff_op_hlineto, + cff_op_vlineto, + + cff_op_rrcurveto, + cff_op_hhcurveto, + cff_op_hvcurveto, + cff_op_rcurveline, + cff_op_rlinecurve, + cff_op_vhcurveto, + cff_op_vvcurveto, + + cff_op_flex, + cff_op_hflex, + cff_op_hflex1, + cff_op_flex1, + + cff_op_endchar, + + cff_op_hstem, + cff_op_vstem, + cff_op_hstemhm, + cff_op_vstemhm, + + cff_op_hintmask, + cff_op_cntrmask, + cff_op_dotsection, /* deprecated, acts as no-op */ + + cff_op_abs, + cff_op_add, + cff_op_sub, + cff_op_div, + cff_op_neg, + cff_op_random, + cff_op_mul, + cff_op_sqrt, + + cff_op_blend, + + cff_op_drop, + cff_op_exch, + cff_op_index, + cff_op_roll, + cff_op_dup, + + cff_op_put, + cff_op_get, + cff_op_store, + cff_op_load, + + cff_op_and, + cff_op_or, + cff_op_not, + cff_op_eq, + cff_op_ifelse, + + cff_op_callsubr, + cff_op_callgsubr, + cff_op_return, + + /* Type 1 opcodes: invalid but seen in real life */ + cff_op_hsbw, + cff_op_closepath, + cff_op_callothersubr, + cff_op_pop, + cff_op_seac, + cff_op_sbw, + cff_op_setcurrentpoint, + + /* do not remove */ + cff_op_max + + } CFF_Operator; + + +#define CFF_COUNT_CHECK_WIDTH 0x80 +#define CFF_COUNT_EXACT 0x40 +#define CFF_COUNT_CLEAR_STACK 0x20 + + /* count values which have the `CFF_COUNT_CHECK_WIDTH' flag set are */ + /* used for checking the width and requested numbers of arguments */ + /* only; they are set to zero afterwards */ + + /* the other two flags are informative only and unused currently */ + + static const FT_Byte cff_argument_counts[] = + { + 0, /* unknown */ + + 2 | CFF_COUNT_CHECK_WIDTH | CFF_COUNT_EXACT, /* rmoveto */ + 1 | CFF_COUNT_CHECK_WIDTH | CFF_COUNT_EXACT, + 1 | CFF_COUNT_CHECK_WIDTH | CFF_COUNT_EXACT, + + 0 | CFF_COUNT_CLEAR_STACK, /* rlineto */ + 0 | CFF_COUNT_CLEAR_STACK, + 0 | CFF_COUNT_CLEAR_STACK, + + 0 | CFF_COUNT_CLEAR_STACK, /* rrcurveto */ + 0 | CFF_COUNT_CLEAR_STACK, + 0 | CFF_COUNT_CLEAR_STACK, + 0 | CFF_COUNT_CLEAR_STACK, + 0 | CFF_COUNT_CLEAR_STACK, + 0 | CFF_COUNT_CLEAR_STACK, + 0 | CFF_COUNT_CLEAR_STACK, + + 13, /* flex */ + 7, + 9, + 11, + + 0 | CFF_COUNT_CHECK_WIDTH, /* endchar */ + + 2 | CFF_COUNT_CHECK_WIDTH, /* hstem */ + 2 | CFF_COUNT_CHECK_WIDTH, + 2 | CFF_COUNT_CHECK_WIDTH, + 2 | CFF_COUNT_CHECK_WIDTH, + + 0 | CFF_COUNT_CHECK_WIDTH, /* hintmask */ + 0 | CFF_COUNT_CHECK_WIDTH, /* cntrmask */ + 0, /* dotsection */ + + 1, /* abs */ + 2, + 2, + 2, + 1, + 0, + 2, + 1, + + 1, /* blend */ + + 1, /* drop */ + 2, + 1, + 2, + 1, + + 2, /* put */ + 1, + 4, + 3, + + 2, /* and */ + 2, + 1, + 2, + 4, + + 1, /* callsubr */ + 1, + 0, + + 2, /* hsbw */ + 0, + 0, + 0, + 5, /* seac */ + 4, /* sbw */ + 2 /* setcurrentpoint */ + }; + + + /*************************************************************************/ + /*************************************************************************/ + /*************************************************************************/ + /********** *********/ + /********** *********/ + /********** GENERIC CHARSTRING PARSING *********/ + /********** *********/ + /********** *********/ + /*************************************************************************/ + /*************************************************************************/ + /*************************************************************************/ + + + /*************************************************************************/ + /* */ + /* <Function> */ + /* cff_builder_init */ + /* */ + /* <Description> */ + /* Initializes a given glyph builder. */ + /* */ + /* <InOut> */ + /* builder :: A pointer to the glyph builder to initialize. */ + /* */ + /* <Input> */ + /* face :: The current face object. */ + /* */ + /* size :: The current size object. */ + /* */ + /* glyph :: The current glyph object. */ + /* */ + /* hinting :: Whether hinting is active. */ + /* */ + static void + cff_builder_init( CFF_Builder* builder, + TT_Face face, + CFF_Size size, + CFF_GlyphSlot glyph, + FT_Bool hinting ) + { + builder->path_begun = 0; + builder->load_points = 1; + + builder->face = face; + builder->glyph = glyph; + builder->memory = face->root.memory; + + if ( glyph ) + { + FT_GlyphLoader loader = glyph->root.internal->loader; + + + builder->loader = loader; + builder->base = &loader->base.outline; + builder->current = &loader->current.outline; + FT_GlyphLoader_Rewind( loader ); + + builder->hints_globals = 0; + builder->hints_funcs = 0; + + if ( hinting && size ) + { + CFF_Internal internal = (CFF_Internal)size->root.internal; + + + builder->hints_globals = (void *)internal->topfont; + builder->hints_funcs = glyph->root.internal->glyph_hints; + } + } + + builder->pos_x = 0; + builder->pos_y = 0; + + builder->left_bearing.x = 0; + builder->left_bearing.y = 0; + builder->advance.x = 0; + builder->advance.y = 0; + } + + + /*************************************************************************/ + /* */ + /* <Function> */ + /* cff_builder_done */ + /* */ + /* <Description> */ + /* Finalizes a given glyph builder. Its contents can still be used */ + /* after the call, but the function saves important information */ + /* within the corresponding glyph slot. */ + /* */ + /* <Input> */ + /* builder :: A pointer to the glyph builder to finalize. */ + /* */ + static void + cff_builder_done( CFF_Builder* builder ) + { + CFF_GlyphSlot glyph = builder->glyph; + + + if ( glyph ) + glyph->root.outline = *builder->base; + } + + + /*************************************************************************/ + /* */ + /* <Function> */ + /* cff_compute_bias */ + /* */ + /* <Description> */ + /* Computes the bias value in dependence of the number of glyph */ + /* subroutines. */ + /* */ + /* <Input> */ + /* in_charstring_type :: The `CharstringType' value of the top DICT */ + /* dictionary. */ + /* */ + /* num_subrs :: The number of glyph subroutines. */ + /* */ + /* <Return> */ + /* The bias value. */ + static FT_Int + cff_compute_bias( FT_Int in_charstring_type, + FT_UInt num_subrs ) + { + FT_Int result; + + + if ( in_charstring_type == 1 ) + result = 0; + else if ( num_subrs < 1240 ) + result = 107; + else if ( num_subrs < 33900U ) + result = 1131; + else + result = 32768U; + + return result; + } + + + /*************************************************************************/ + /* */ + /* <Function> */ + /* cff_decoder_init */ + /* */ + /* <Description> */ + /* Initializes a given glyph decoder. */ + /* */ + /* <InOut> */ + /* decoder :: A pointer to the glyph builder to initialize. */ + /* */ + /* <Input> */ + /* face :: The current face object. */ + /* */ + /* size :: The current size object. */ + /* */ + /* slot :: The current glyph object. */ + /* */ + /* hinting :: Whether hinting is active. */ + /* */ + /* hint_mode :: The hinting mode. */ + /* */ + FT_LOCAL_DEF( void ) + cff_decoder_init( CFF_Decoder* decoder, + TT_Face face, + CFF_Size size, + CFF_GlyphSlot slot, + FT_Bool hinting, + FT_Render_Mode hint_mode ) + { + CFF_Font cff = (CFF_Font)face->extra.data; + + + /* clear everything */ + FT_MEM_ZERO( decoder, sizeof ( *decoder ) ); + + /* initialize builder */ + cff_builder_init( &decoder->builder, face, size, slot, hinting ); + + /* initialize Type2 decoder */ + decoder->cff = cff; + decoder->num_globals = cff->global_subrs_index.count; + decoder->globals = cff->global_subrs; + decoder->globals_bias = cff_compute_bias( + cff->top_font.font_dict.charstring_type, + decoder->num_globals ); + + decoder->hint_mode = hint_mode; + } + + + /* this function is used to select the subfont */ + /* and the locals subrs array */ + FT_LOCAL_DEF( FT_Error ) + cff_decoder_prepare( CFF_Decoder* decoder, + CFF_Size size, + FT_UInt glyph_index ) + { + CFF_Builder *builder = &decoder->builder; + CFF_Font cff = (CFF_Font)builder->face->extra.data; + CFF_SubFont sub = &cff->top_font; + FT_Error error = CFF_Err_Ok; + + + /* manage CID fonts */ + if ( cff->num_subfonts ) + { + FT_Byte fd_index = cff_fd_select_get( &cff->fd_select, glyph_index ); + + + if ( fd_index >= cff->num_subfonts ) + { + FT_TRACE4(( "cff_decoder_prepare: invalid CID subfont index\n" )); + error = CFF_Err_Invalid_File_Format; + goto Exit; + } + + FT_TRACE3(( "glyph index %d (subfont %d):\n", glyph_index, fd_index )); + + sub = cff->subfonts[fd_index]; + + if ( builder->hints_funcs && size ) + { + CFF_Internal internal = (CFF_Internal)size->root.internal; + + + /* for CFFs without subfonts, this value has already been set */ + builder->hints_globals = (void *)internal->subfonts[fd_index]; + } + } +#ifdef FT_DEBUG_LEVEL_TRACE + else + FT_TRACE3(( "glyph index %d:\n", glyph_index )); +#endif + + decoder->num_locals = sub->local_subrs_index.count; + decoder->locals = sub->local_subrs; + decoder->locals_bias = cff_compute_bias( + decoder->cff->top_font.font_dict.charstring_type, + decoder->num_locals ); + + decoder->glyph_width = sub->private_dict.default_width; + decoder->nominal_width = sub->private_dict.nominal_width; + + Exit: + return error; + } + + + /* check that there is enough space for `count' more points */ + static FT_Error + check_points( CFF_Builder* builder, + FT_Int count ) + { + return FT_GLYPHLOADER_CHECK_POINTS( builder->loader, count, 0 ); + } + + + /* add a new point, do not check space */ + static void + cff_builder_add_point( CFF_Builder* builder, + FT_Pos x, + FT_Pos y, + FT_Byte flag ) + { + FT_Outline* outline = builder->current; + + + if ( builder->load_points ) + { + FT_Vector* point = outline->points + outline->n_points; + FT_Byte* control = (FT_Byte*)outline->tags + outline->n_points; + + + point->x = x >> 16; + point->y = y >> 16; + *control = (FT_Byte)( flag ? FT_CURVE_TAG_ON : FT_CURVE_TAG_CUBIC ); + } + + outline->n_points++; + } + + + /* check space for a new on-curve point, then add it */ + static FT_Error + cff_builder_add_point1( CFF_Builder* builder, + FT_Pos x, + FT_Pos y ) + { + FT_Error error; + + + error = check_points( builder, 1 ); + if ( !error ) + cff_builder_add_point( builder, x, y, 1 ); + + return error; + } + + + /* check space for a new contour, then add it */ + static FT_Error + cff_builder_add_contour( CFF_Builder* builder ) + { + FT_Outline* outline = builder->current; + FT_Error error; + + + if ( !builder->load_points ) + { + outline->n_contours++; + return CFF_Err_Ok; + } + + error = FT_GLYPHLOADER_CHECK_POINTS( builder->loader, 0, 1 ); + if ( !error ) + { + if ( outline->n_contours > 0 ) + outline->contours[outline->n_contours - 1] = + (short)( outline->n_points - 1 ); + + outline->n_contours++; + } + + return error; + } + + + /* if a path was begun, add its first on-curve point */ + static FT_Error + cff_builder_start_point( CFF_Builder* builder, + FT_Pos x, + FT_Pos y ) + { + FT_Error error = CFF_Err_Ok; + + + /* test whether we are building a new contour */ + if ( !builder->path_begun ) + { + builder->path_begun = 1; + error = cff_builder_add_contour( builder ); + if ( !error ) + error = cff_builder_add_point1( builder, x, y ); + } + + return error; + } + + + /* close the current contour */ + static void + cff_builder_close_contour( CFF_Builder* builder ) + { + FT_Outline* outline = builder->current; + FT_Int first; + + + if ( !outline ) + return; + + first = outline->n_contours <= 1 + ? 0 : outline->contours[outline->n_contours - 2] + 1; + + /* We must not include the last point in the path if it */ + /* is located on the first point. */ + if ( outline->n_points > 1 ) + { + FT_Vector* p1 = outline->points + first; + FT_Vector* p2 = outline->points + outline->n_points - 1; + FT_Byte* control = (FT_Byte*)outline->tags + outline->n_points - 1; + + + /* `delete' last point only if it coincides with the first */ + /* point and if it is not a control point (which can happen). */ + if ( p1->x == p2->x && p1->y == p2->y ) + if ( *control == FT_CURVE_TAG_ON ) + outline->n_points--; + } + + if ( outline->n_contours > 0 ) + { + /* Don't add contours only consisting of one point, i.e., */ + /* check whether begin point and last point are the same. */ + if ( first == outline->n_points - 1 ) + { + outline->n_contours--; + outline->n_points--; + } + else + outline->contours[outline->n_contours - 1] = + (short)( outline->n_points - 1 ); + } + } + + + static FT_Int + cff_lookup_glyph_by_stdcharcode( CFF_Font cff, + FT_Int charcode ) + { + FT_UInt n; + FT_UShort glyph_sid; + + + /* CID-keyed fonts don't have glyph names */ + if ( !cff->charset.sids ) + return -1; + + /* check range of standard char code */ + if ( charcode < 0 || charcode > 255 ) + return -1; + + /* Get code to SID mapping from `cff_standard_encoding'. */ + glyph_sid = cff_get_standard_encoding( (FT_UInt)charcode ); + + for ( n = 0; n < cff->num_glyphs; n++ ) + { + if ( cff->charset.sids[n] == glyph_sid ) + return n; + } + + return -1; + } + + + static FT_Error + cff_get_glyph_data( TT_Face face, + FT_UInt glyph_index, + FT_Byte** pointer, + FT_ULong* length ) + { +#ifdef FT_CONFIG_OPTION_INCREMENTAL + /* For incremental fonts get the character data using the */ + /* callback function. */ + if ( face->root.internal->incremental_interface ) + { + FT_Data data; + FT_Error error = + face->root.internal->incremental_interface->funcs->get_glyph_data( + face->root.internal->incremental_interface->object, + glyph_index, &data ); + + + *pointer = (FT_Byte*)data.pointer; + *length = data.length; + + return error; + } + else +#endif /* FT_CONFIG_OPTION_INCREMENTAL */ + + { + CFF_Font cff = (CFF_Font)(face->extra.data); + + + return cff_index_access_element( &cff->charstrings_index, glyph_index, + pointer, length ); + } + } + + + static void + cff_free_glyph_data( TT_Face face, + FT_Byte** pointer, + FT_ULong length ) + { +#ifndef FT_CONFIG_OPTION_INCREMENTAL + FT_UNUSED( length ); +#endif + +#ifdef FT_CONFIG_OPTION_INCREMENTAL + /* For incremental fonts get the character data using the */ + /* callback function. */ + if ( face->root.internal->incremental_interface ) + { + FT_Data data; + + + data.pointer = *pointer; + data.length = length; + + face->root.internal->incremental_interface->funcs->free_glyph_data( + face->root.internal->incremental_interface->object, &data ); + } + else +#endif /* FT_CONFIG_OPTION_INCREMENTAL */ + + { + CFF_Font cff = (CFF_Font)(face->extra.data); + + + cff_index_forget_element( &cff->charstrings_index, pointer ); + } + } + + + static FT_Error + cff_operator_seac( CFF_Decoder* decoder, + FT_Pos asb, + FT_Pos adx, + FT_Pos ady, + FT_Int bchar, + FT_Int achar ) + { + FT_Error error; + CFF_Builder* builder = &decoder->builder; + FT_Int bchar_index, achar_index; + TT_Face face = decoder->builder.face; + FT_Vector left_bearing, advance; + FT_Byte* charstring; + FT_ULong charstring_len; + FT_Pos glyph_width; + + + if ( decoder->seac ) + { + FT_ERROR(( "cff_operator_seac: invalid nested seac\n" )); + return CFF_Err_Syntax_Error; + } + + adx += decoder->builder.left_bearing.x; + ady += decoder->builder.left_bearing.y; + +#ifdef FT_CONFIG_OPTION_INCREMENTAL + /* Incremental fonts don't necessarily have valid charsets. */ + /* They use the character code, not the glyph index, in this case. */ + if ( face->root.internal->incremental_interface ) + { + bchar_index = bchar; + achar_index = achar; + } + else +#endif /* FT_CONFIG_OPTION_INCREMENTAL */ + { + CFF_Font cff = (CFF_Font)(face->extra.data); + + + bchar_index = cff_lookup_glyph_by_stdcharcode( cff, bchar ); + achar_index = cff_lookup_glyph_by_stdcharcode( cff, achar ); + } + + if ( bchar_index < 0 || achar_index < 0 ) + { + FT_ERROR(( "cff_operator_seac:" + " invalid seac character code arguments\n" )); + return CFF_Err_Syntax_Error; + } + + /* If we are trying to load a composite glyph, do not load the */ + /* accent character and return the array of subglyphs. */ + if ( builder->no_recurse ) + { + FT_GlyphSlot glyph = (FT_GlyphSlot)builder->glyph; + FT_GlyphLoader loader = glyph->internal->loader; + FT_SubGlyph subg; + + + /* reallocate subglyph array if necessary */ + error = FT_GlyphLoader_CheckSubGlyphs( loader, 2 ); + if ( error ) + goto Exit; + + subg = loader->current.subglyphs; + + /* subglyph 0 = base character */ + subg->index = bchar_index; + subg->flags = FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES | + FT_SUBGLYPH_FLAG_USE_MY_METRICS; + subg->arg1 = 0; + subg->arg2 = 0; + subg++; + + /* subglyph 1 = accent character */ + subg->index = achar_index; + subg->flags = FT_SUBGLYPH_FLAG_ARGS_ARE_XY_VALUES; + subg->arg1 = (FT_Int)( adx >> 16 ); + subg->arg2 = (FT_Int)( ady >> 16 ); + + /* set up remaining glyph fields */ + glyph->num_subglyphs = 2; + glyph->subglyphs = loader->base.subglyphs; + glyph->format = FT_GLYPH_FORMAT_COMPOSITE; + + loader->current.num_subglyphs = 2; + } + + FT_GlyphLoader_Prepare( builder->loader ); + + /* First load `bchar' in builder */ + error = cff_get_glyph_data( face, bchar_index, + &charstring, &charstring_len ); + if ( !error ) + { + /* the seac operator must not be nested */ + decoder->seac = TRUE; + error = cff_decoder_parse_charstrings( decoder, charstring, + charstring_len ); + decoder->seac = FALSE; + + cff_free_glyph_data( face, &charstring, charstring_len ); + + if ( error ) + goto Exit; + } + + /* Save the left bearing, advance and glyph width of the base */ + /* character as they will be erased by the next load. */ + + left_bearing = builder->left_bearing; + advance = builder->advance; + glyph_width = decoder->glyph_width; + + builder->left_bearing.x = 0; + builder->left_bearing.y = 0; + + builder->pos_x = adx - asb; + builder->pos_y = ady; + + /* Now load `achar' on top of the base outline. */ + error = cff_get_glyph_data( face, achar_index, + &charstring, &charstring_len ); + if ( !error ) + { + /* the seac operator must not be nested */ + decoder->seac = TRUE; + error = cff_decoder_parse_charstrings( decoder, charstring, + charstring_len ); + decoder->seac = FALSE; + + cff_free_glyph_data( face, &charstring, charstring_len ); + + if ( error ) + goto Exit; + } + + /* Restore the left side bearing, advance and glyph width */ + /* of the base character. */ + builder->left_bearing = left_bearing; + builder->advance = advance; + decoder->glyph_width = glyph_width; + + builder->pos_x = 0; + builder->pos_y = 0; + + Exit: + return error; + } + + + /*************************************************************************/ + /* */ + /* <Function> */ + /* cff_decoder_parse_charstrings */ + /* */ + /* <Description> */ + /* Parses a given Type 2 charstrings program. */ + /* */ + /* <InOut> */ + /* decoder :: The current Type 1 decoder. */ + /* */ + /* <Input> */ + /* charstring_base :: The base of the charstring stream. */ + /* */ + /* charstring_len :: The length in bytes of the charstring stream. */ + /* */ + /* <Return> */ + /* FreeType error code. 0 means success. */ + /* */ + FT_LOCAL_DEF( FT_Error ) + cff_decoder_parse_charstrings( CFF_Decoder* decoder, + FT_Byte* charstring_base, + FT_ULong charstring_len ) + { + FT_Error error; + CFF_Decoder_Zone* zone; + FT_Byte* ip; + FT_Byte* limit; + CFF_Builder* builder = &decoder->builder; + FT_Pos x, y; + FT_Fixed seed; + FT_Fixed* stack; + FT_Int charstring_type = + decoder->cff->top_font.font_dict.charstring_type; + + T2_Hints_Funcs hinter; + + + /* set default width */ + decoder->num_hints = 0; + decoder->read_width = 1; + + /* compute random seed from stack address of parameter */ + seed = (FT_Fixed)( ( (FT_PtrDist)(char*)&seed ^ + (FT_PtrDist)(char*)&decoder ^ + (FT_PtrDist)(char*)&charstring_base ) & + FT_ULONG_MAX ) ; + seed = ( seed ^ ( seed >> 10 ) ^ ( seed >> 20 ) ) & 0xFFFFL; + if ( seed == 0 ) + seed = 0x7384; + + /* initialize the decoder */ + decoder->top = decoder->stack; + decoder->zone = decoder->zones; + zone = decoder->zones; + stack = decoder->top; + + hinter = (T2_Hints_Funcs)builder->hints_funcs; + + builder->path_begun = 0; + + zone->base = charstring_base; + limit = zone->limit = charstring_base + charstring_len; + ip = zone->cursor = zone->base; + + error = CFF_Err_Ok; + + x = builder->pos_x; + y = builder->pos_y; + + /* begin hints recording session, if any */ + if ( hinter ) + hinter->open( hinter->hints ); + + /* now execute loop */ + while ( ip < limit ) + { + CFF_Operator op; + FT_Byte v; + + + /********************************************************************/ + /* */ + /* Decode operator or operand */ + /* */ + v = *ip++; + if ( v >= 32 || v == 28 ) + { + FT_Int shift = 16; + FT_Int32 val; + + + /* this is an operand, push it on the stack */ + if ( v == 28 ) + { + if ( ip + 1 >= limit ) + goto Syntax_Error; + val = (FT_Short)( ( (FT_Short)ip[0] << 8 ) | ip[1] ); + ip += 2; + } + else if ( v < 247 ) + val = (FT_Int32)v - 139; + else if ( v < 251 ) + { + if ( ip >= limit ) + goto Syntax_Error; + val = ( (FT_Int32)v - 247 ) * 256 + *ip++ + 108; + } + else if ( v < 255 ) + { + if ( ip >= limit ) + goto Syntax_Error; + val = -( (FT_Int32)v - 251 ) * 256 - *ip++ - 108; + } + else + { + if ( ip + 3 >= limit ) + goto Syntax_Error; + val = ( (FT_Int32)ip[0] << 24 ) | + ( (FT_Int32)ip[1] << 16 ) | + ( (FT_Int32)ip[2] << 8 ) | + ip[3]; + ip += 4; + if ( charstring_type == 2 ) + shift = 0; + } + if ( decoder->top - stack >= CFF_MAX_OPERANDS ) + goto Stack_Overflow; + + val <<= shift; + *decoder->top++ = val; + +#ifdef FT_DEBUG_LEVEL_TRACE + if ( !( val & 0xFFFFL ) ) + FT_TRACE4(( " %ld", (FT_Int32)( val >> 16 ) )); + else + FT_TRACE4(( " %.2f", val / 65536.0 )); +#endif + + } + else + { + /* The specification says that normally arguments are to be taken */ + /* from the bottom of the stack. However, this seems not to be */ + /* correct, at least for Acroread 7.0.8 on GNU/Linux: It pops the */ + /* arguments similar to a PS interpreter. */ + + FT_Fixed* args = decoder->top; + FT_Int num_args = (FT_Int)( args - decoder->stack ); + FT_Int req_args; + + + /* find operator */ + op = cff_op_unknown; + + switch ( v ) + { + case 1: + op = cff_op_hstem; + break; + case 3: + op = cff_op_vstem; + break; + case 4: + op = cff_op_vmoveto; + break; + case 5: + op = cff_op_rlineto; + break; + case 6: + op = cff_op_hlineto; + break; + case 7: + op = cff_op_vlineto; + break; + case 8: + op = cff_op_rrcurveto; + break; + case 9: + op = cff_op_closepath; + break; + case 10: + op = cff_op_callsubr; + break; + case 11: + op = cff_op_return; + break; + case 12: + { + if ( ip >= limit ) + goto Syntax_Error; + v = *ip++; + + switch ( v ) + { + case 0: + op = cff_op_dotsection; + break; + case 1: /* this is actually the Type1 vstem3 operator */ + op = cff_op_vstem; + break; + case 2: /* this is actually the Type1 hstem3 operator */ + op = cff_op_hstem; + break; + case 3: + op = cff_op_and; + break; + case 4: + op = cff_op_or; + break; + case 5: + op = cff_op_not; + break; + case 6: + op = cff_op_seac; + break; + case 7: + op = cff_op_sbw; + break; + case 8: + op = cff_op_store; + break; + case 9: + op = cff_op_abs; + break; + case 10: + op = cff_op_add; + break; + case 11: + op = cff_op_sub; + break; + case 12: + op = cff_op_div; + break; + case 13: + op = cff_op_load; + break; + case 14: + op = cff_op_neg; + break; + case 15: + op = cff_op_eq; + break; + case 16: + op = cff_op_callothersubr; + break; + case 17: + op = cff_op_pop; + break; + case 18: + op = cff_op_drop; + break; + case 20: + op = cff_op_put; + break; + case 21: + op = cff_op_get; + break; + case 22: + op = cff_op_ifelse; + break; + case 23: + op = cff_op_random; + break; + case 24: + op = cff_op_mul; + break; + case 26: + op = cff_op_sqrt; + break; + case 27: + op = cff_op_dup; + break; + case 28: + op = cff_op_exch; + break; + case 29: + op = cff_op_index; + break; + case 30: + op = cff_op_roll; + break; + case 33: + op = cff_op_setcurrentpoint; + break; + case 34: + op = cff_op_hflex; + break; + case 35: + op = cff_op_flex; + break; + case 36: + op = cff_op_hflex1; + break; + case 37: + op = cff_op_flex1; + break; + default: + FT_TRACE4(( " unknown op (12, %d)\n", v )); + break; + } + } + break; + case 13: + op = cff_op_hsbw; + break; + case 14: + op = cff_op_endchar; + break; + case 16: + op = cff_op_blend; + break; + case 18: + op = cff_op_hstemhm; + break; + case 19: + op = cff_op_hintmask; + break; + case 20: + op = cff_op_cntrmask; + break; + case 21: + op = cff_op_rmoveto; + break; + case 22: + op = cff_op_hmoveto; + break; + case 23: + op = cff_op_vstemhm; + break; + case 24: + op = cff_op_rcurveline; + break; + case 25: + op = cff_op_rlinecurve; + break; + case 26: + op = cff_op_vvcurveto; + break; + case 27: + op = cff_op_hhcurveto; + break; + case 29: + op = cff_op_callgsubr; + break; + case 30: + op = cff_op_vhcurveto; + break; + case 31: + op = cff_op_hvcurveto; + break; + default: + FT_TRACE4(( " unknown op (%d)\n", v )); + break; + } + + if ( op == cff_op_unknown ) + continue; + + /* check arguments */ + req_args = cff_argument_counts[op]; + if ( req_args & CFF_COUNT_CHECK_WIDTH ) + { + if ( num_args > 0 && decoder->read_width ) + { + /* If `nominal_width' is non-zero, the number is really a */ + /* difference against `nominal_width'. Else, the number here */ + /* is truly a width, not a difference against `nominal_width'. */ + /* If the font does not set `nominal_width', then */ + /* `nominal_width' defaults to zero, and so we can set */ + /* `glyph_width' to `nominal_width' plus number on the stack */ + /* -- for either case. */ + + FT_Int set_width_ok; + + + switch ( op ) + { + case cff_op_hmoveto: + case cff_op_vmoveto: + set_width_ok = num_args & 2; + break; + + case cff_op_hstem: + case cff_op_vstem: + case cff_op_hstemhm: + case cff_op_vstemhm: + case cff_op_rmoveto: + case cff_op_hintmask: + case cff_op_cntrmask: + set_width_ok = num_args & 1; + break; + + case cff_op_endchar: + /* If there is a width specified for endchar, we either have */ + /* 1 argument or 5 arguments. We like to argue. */ + set_width_ok = ( num_args == 5 ) || ( num_args == 1 ); + break; + + default: + set_width_ok = 0; + break; + } + + if ( set_width_ok ) + { + decoder->glyph_width = decoder->nominal_width + + ( stack[0] >> 16 ); + + if ( decoder->width_only ) + { + /* we only want the advance width; stop here */ + break; + } + + /* Consumed an argument. */ + num_args--; + } + } + + decoder->read_width = 0; + req_args = 0; + } + + req_args &= 0x000F; + if ( num_args < req_args ) + goto Stack_Underflow; + args -= req_args; + num_args -= req_args; + + /* At this point, `args' points to the first argument of the */ + /* operand in case `req_args' isn't zero. Otherwise, we have */ + /* to adjust `args' manually. */ + + /* Note that we only pop arguments from the stack which we */ + /* really need and can digest so that we can continue in case */ + /* of superfluous stack elements. */ + + switch ( op ) + { + case cff_op_hstem: + case cff_op_vstem: + case cff_op_hstemhm: + case cff_op_vstemhm: + /* the number of arguments is always even here */ + FT_TRACE4(( + op == cff_op_hstem ? " hstem\n" : + ( op == cff_op_vstem ? " vstem\n" : + ( op == cff_op_hstemhm ? " hstemhm\n" : " vstemhm\n" ) ) )); + + if ( hinter ) + hinter->stems( hinter->hints, + ( op == cff_op_hstem || op == cff_op_hstemhm ), + num_args / 2, + args - ( num_args & ~1 ) ); + + decoder->num_hints += num_args / 2; + args = stack; + break; + + case cff_op_hintmask: + case cff_op_cntrmask: + FT_TRACE4(( op == cff_op_hintmask ? " hintmask" : " cntrmask" )); + + /* implement vstem when needed -- */ + /* the specification doesn't say it, but this also works */ + /* with the 'cntrmask' operator */ + /* */ + if ( num_args > 0 ) + { + if ( hinter ) + hinter->stems( hinter->hints, + 0, + num_args / 2, + args - ( num_args & ~1 ) ); + + decoder->num_hints += num_args / 2; + } + + /* In a valid charstring there must be at least one byte */ + /* after `hintmask' or `cntrmask' (e.g., for a `return' */ + /* instruction). Additionally, there must be space for */ + /* `num_hints' bits. */ + + if ( ( ip + ( ( decoder->num_hints + 7 ) >> 3 ) ) >= limit ) + goto Syntax_Error; + + if ( hinter ) + { + if ( op == cff_op_hintmask ) + hinter->hintmask( hinter->hints, + builder->current->n_points, + decoder->num_hints, + ip ); + else + hinter->counter( hinter->hints, + decoder->num_hints, + ip ); + } + +#ifdef FT_DEBUG_LEVEL_TRACE + { + FT_UInt maskbyte; + + + FT_TRACE4(( " (maskbytes:" )); + + for ( maskbyte = 0; + maskbyte < (FT_UInt)( ( decoder->num_hints + 7 ) >> 3 ); + maskbyte++, ip++ ) + FT_TRACE4(( " 0x%02X", *ip )); + + FT_TRACE4(( ")\n" )); + } +#else + ip += ( decoder->num_hints + 7 ) >> 3; +#endif + args = stack; + break; + + case cff_op_rmoveto: + FT_TRACE4(( " rmoveto\n" )); + + cff_builder_close_contour( builder ); + builder->path_begun = 0; + x += args[-2]; + y += args[-1]; + args = stack; + break; + + case cff_op_vmoveto: + FT_TRACE4(( " vmoveto\n" )); + + cff_builder_close_contour( builder ); + builder->path_begun = 0; + y += args[-1]; + args = stack; + break; + + case cff_op_hmoveto: + FT_TRACE4(( " hmoveto\n" )); + + cff_builder_close_contour( builder ); + builder->path_begun = 0; + x += args[-1]; + args = stack; + break; + + case cff_op_rlineto: + FT_TRACE4(( " rlineto\n" )); + + if ( cff_builder_start_point ( builder, x, y ) || + check_points( builder, num_args / 2 ) ) + goto Fail; + + if ( num_args < 2 ) + goto Stack_Underflow; + + args -= num_args & ~1; + while ( args < decoder->top ) + { + x += args[0]; + y += args[1]; + cff_builder_add_point( builder, x, y, 1 ); + args += 2; + } + args = stack; + break; + + case cff_op_hlineto: + case cff_op_vlineto: + { + FT_Int phase = ( op == cff_op_hlineto ); + + + FT_TRACE4(( op == cff_op_hlineto ? " hlineto\n" + : " vlineto\n" )); + + if ( num_args < 0 ) + goto Stack_Underflow; + + /* there exist subsetted fonts (found in PDFs) */ + /* which call `hlineto' without arguments */ + if ( num_args == 0 ) + break; + + if ( cff_builder_start_point ( builder, x, y ) || + check_points( builder, num_args ) ) + goto Fail; + + args = stack; + while ( args < decoder->top ) + { + if ( phase ) + x += args[0]; + else + y += args[0]; + + if ( cff_builder_add_point1( builder, x, y ) ) + goto Fail; + + args++; + phase ^= 1; + } + args = stack; + } + break; + + case cff_op_rrcurveto: + { + FT_Int nargs; + + + FT_TRACE4(( " rrcurveto\n" )); + + if ( num_args < 6 ) + goto Stack_Underflow; + + nargs = num_args - num_args % 6; + + if ( cff_builder_start_point ( builder, x, y ) || + check_points( builder, nargs / 2 ) ) + goto Fail; + + args -= nargs; + while ( args < decoder->top ) + { + x += args[0]; + y += args[1]; + cff_builder_add_point( builder, x, y, 0 ); + x += args[2]; + y += args[3]; + cff_builder_add_point( builder, x, y, 0 ); + x += args[4]; + y += args[5]; + cff_builder_add_point( builder, x, y, 1 ); + args += 6; + } + args = stack; + } + break; + + case cff_op_vvcurveto: + { + FT_Int nargs; + + + FT_TRACE4(( " vvcurveto\n" )); + + if ( num_args < 4 ) + goto Stack_Underflow; + + /* if num_args isn't of the form 4n or 4n+1, */ + /* we enforce it by clearing the second bit */ + + nargs = num_args & ~2; + + if ( cff_builder_start_point( builder, x, y ) ) + goto Fail; + + args -= nargs; + + if ( nargs & 1 ) + { + x += args[0]; + args++; + nargs--; + } + + if ( check_points( builder, 3 * ( nargs / 4 ) ) ) + goto Fail; + + while ( args < decoder->top ) + { + y += args[0]; + cff_builder_add_point( builder, x, y, 0 ); + x += args[1]; + y += args[2]; + cff_builder_add_point( builder, x, y, 0 ); + y += args[3]; + cff_builder_add_point( builder, x, y, 1 ); + args += 4; + } + args = stack; + } + break; + + case cff_op_hhcurveto: + { + FT_Int nargs; + + + FT_TRACE4(( " hhcurveto\n" )); + + if ( num_args < 4 ) + goto Stack_Underflow; + + /* if num_args isn't of the form 4n or 4n+1, */ + /* we enforce it by clearing the second bit */ + + nargs = num_args & ~2; + + if ( cff_builder_start_point( builder, x, y ) ) + goto Fail; + + args -= nargs; + if ( nargs & 1 ) + { + y += args[0]; + args++; + nargs--; + } + + if ( check_points( builder, 3 * ( nargs / 4 ) ) ) + goto Fail; + + while ( args < decoder->top ) + { + x += args[0]; + cff_builder_add_point( builder, x, y, 0 ); + x += args[1]; + y += args[2]; + cff_builder_add_point( builder, x, y, 0 ); + x += args[3]; + cff_builder_add_point( builder, x, y, 1 ); + args += 4; + } + args = stack; + } + break; + + case cff_op_vhcurveto: + case cff_op_hvcurveto: + { + FT_Int phase; + FT_Int nargs; + + + FT_TRACE4(( op == cff_op_vhcurveto ? " vhcurveto\n" + : " hvcurveto\n" )); + + if ( cff_builder_start_point( builder, x, y ) ) + goto Fail; + + if ( num_args < 4 ) + goto Stack_Underflow; + + /* if num_args isn't of the form 8n, 8n+1, 8n+4, or 8n+5, */ + /* we enforce it by clearing the second bit */ + + nargs = num_args & ~2; + + args -= nargs; + if ( check_points( builder, ( nargs / 4 ) * 3 ) ) + goto Stack_Underflow; + + phase = ( op == cff_op_hvcurveto ); + + while ( nargs >= 4 ) + { + nargs -= 4; + if ( phase ) + { + x += args[0]; + cff_builder_add_point( builder, x, y, 0 ); + x += args[1]; + y += args[2]; + cff_builder_add_point( builder, x, y, 0 ); + y += args[3]; + if ( nargs == 1 ) + x += args[4]; + cff_builder_add_point( builder, x, y, 1 ); + } + else + { + y += args[0]; + cff_builder_add_point( builder, x, y, 0 ); + x += args[1]; + y += args[2]; + cff_builder_add_point( builder, x, y, 0 ); + x += args[3]; + if ( nargs == 1 ) + y += args[4]; + cff_builder_add_point( builder, x, y, 1 ); + } + args += 4; + phase ^= 1; + } + args = stack; + } + break; + + case cff_op_rlinecurve: + { + FT_Int num_lines; + FT_Int nargs; + + + FT_TRACE4(( " rlinecurve\n" )); + + if ( num_args < 8 ) + goto Stack_Underflow; + + nargs = num_args & ~1; + num_lines = ( nargs - 6 ) / 2; + + if ( cff_builder_start_point( builder, x, y ) || + check_points( builder, num_lines + 3 ) ) + goto Fail; + + args -= nargs; + + /* first, add the line segments */ + while ( num_lines > 0 ) + { + x += args[0]; + y += args[1]; + cff_builder_add_point( builder, x, y, 1 ); + args += 2; + num_lines--; + } + + /* then the curve */ + x += args[0]; + y += args[1]; + cff_builder_add_point( builder, x, y, 0 ); + x += args[2]; + y += args[3]; + cff_builder_add_point( builder, x, y, 0 ); + x += args[4]; + y += args[5]; + cff_builder_add_point( builder, x, y, 1 ); + args = stack; + } + break; + + case cff_op_rcurveline: + { + FT_Int num_curves; + FT_Int nargs; + + + FT_TRACE4(( " rcurveline\n" )); + + if ( num_args < 8 ) + goto Stack_Underflow; + + nargs = num_args - 2; + nargs = nargs - nargs % 6 + 2; + num_curves = ( nargs - 2 ) / 6; + + if ( cff_builder_start_point ( builder, x, y ) || + check_points( builder, num_curves * 3 + 2 ) ) + goto Fail; + + args -= nargs; + + /* first, add the curves */ + while ( num_curves > 0 ) + { + x += args[0]; + y += args[1]; + cff_builder_add_point( builder, x, y, 0 ); + x += args[2]; + y += args[3]; + cff_builder_add_point( builder, x, y, 0 ); + x += args[4]; + y += args[5]; + cff_builder_add_point( builder, x, y, 1 ); + args += 6; + num_curves--; + } + + /* then the final line */ + x += args[0]; + y += args[1]; + cff_builder_add_point( builder, x, y, 1 ); + args = stack; + } + break; + + case cff_op_hflex1: + { + FT_Pos start_y; + + + FT_TRACE4(( " hflex1\n" )); + + /* adding five more points: 4 control points, 1 on-curve point */ + /* -- make sure we have enough space for the start point if it */ + /* needs to be added */ + if ( cff_builder_start_point( builder, x, y ) || + check_points( builder, 6 ) ) + goto Fail; + + /* record the starting point's y position for later use */ + start_y = y; + + /* first control point */ + x += args[0]; + y += args[1]; + cff_builder_add_point( builder, x, y, 0 ); + + /* second control point */ + x += args[2]; + y += args[3]; + cff_builder_add_point( builder, x, y, 0 ); + + /* join point; on curve, with y-value the same as the last */ + /* control point's y-value */ + x += args[4]; + cff_builder_add_point( builder, x, y, 1 ); + + /* third control point, with y-value the same as the join */ + /* point's y-value */ + x += args[5]; + cff_builder_add_point( builder, x, y, 0 ); + + /* fourth control point */ + x += args[6]; + y += args[7]; + cff_builder_add_point( builder, x, y, 0 ); + + /* ending point, with y-value the same as the start */ + x += args[8]; + y = start_y; + cff_builder_add_point( builder, x, y, 1 ); + + args = stack; + break; + } + + case cff_op_hflex: + { + FT_Pos start_y; + + + FT_TRACE4(( " hflex\n" )); + + /* adding six more points; 4 control points, 2 on-curve points */ + if ( cff_builder_start_point( builder, x, y ) || + check_points( builder, 6 ) ) + goto Fail; + + /* record the starting point's y-position for later use */ + start_y = y; + + /* first control point */ + x += args[0]; + cff_builder_add_point( builder, x, y, 0 ); + + /* second control point */ + x += args[1]; + y += args[2]; + cff_builder_add_point( builder, x, y, 0 ); + + /* join point; on curve, with y-value the same as the last */ + /* control point's y-value */ + x += args[3]; + cff_builder_add_point( builder, x, y, 1 ); + + /* third control point, with y-value the same as the join */ + /* point's y-value */ + x += args[4]; + cff_builder_add_point( builder, x, y, 0 ); + + /* fourth control point */ + x += args[5]; + y = start_y; + cff_builder_add_point( builder, x, y, 0 ); + + /* ending point, with y-value the same as the start point's */ + /* y-value -- we don't add this point, though */ + x += args[6]; + cff_builder_add_point( builder, x, y, 1 ); + + args = stack; + break; + } + + case cff_op_flex1: + { + FT_Pos start_x, start_y; /* record start x, y values for */ + /* alter use */ + FT_Fixed dx = 0, dy = 0; /* used in horizontal/vertical */ + /* algorithm below */ + FT_Int horizontal, count; + FT_Fixed* temp; + + + FT_TRACE4(( " flex1\n" )); + + /* adding six more points; 4 control points, 2 on-curve points */ + if ( cff_builder_start_point( builder, x, y ) || + check_points( builder, 6 ) ) + goto Fail; + + /* record the starting point's x, y position for later use */ + start_x = x; + start_y = y; + + /* XXX: figure out whether this is supposed to be a horizontal */ + /* or vertical flex; the Type 2 specification is vague... */ + + temp = args; + + /* grab up to the last argument */ + for ( count = 5; count > 0; count-- ) + { + dx += temp[0]; + dy += temp[1]; + temp += 2; + } + + if ( dx < 0 ) + dx = -dx; + if ( dy < 0 ) + dy = -dy; + + /* strange test, but here it is... */ + horizontal = ( dx > dy ); + + for ( count = 5; count > 0; count-- ) + { + x += args[0]; + y += args[1]; + cff_builder_add_point( builder, x, y, + (FT_Bool)( count == 3 ) ); + args += 2; + } + + /* is last operand an x- or y-delta? */ + if ( horizontal ) + { + x += args[0]; + y = start_y; + } + else + { + x = start_x; + y += args[0]; + } + + cff_builder_add_point( builder, x, y, 1 ); + + args = stack; + break; + } + + case cff_op_flex: + { + FT_UInt count; + + + FT_TRACE4(( " flex\n" )); + + if ( cff_builder_start_point( builder, x, y ) || + check_points( builder, 6 ) ) + goto Fail; + + for ( count = 6; count > 0; count-- ) + { + x += args[0]; + y += args[1]; + cff_builder_add_point( builder, x, y, + (FT_Bool)( count == 4 || count == 1 ) ); + args += 2; + } + + args = stack; + } + break; + + case cff_op_seac: + FT_TRACE4(( " seac\n" )); + + error = cff_operator_seac( decoder, + args[0], args[1], args[2], + (FT_Int)( args[3] >> 16 ), + (FT_Int)( args[4] >> 16 ) ); + + /* add current outline to the glyph slot */ + FT_GlyphLoader_Add( builder->loader ); + + /* return now! */ + FT_TRACE4(( "\n" )); + return error; + + case cff_op_endchar: + FT_TRACE4(( " endchar\n" )); + + /* We are going to emulate the seac operator. */ + if ( num_args >= 4 ) + { + /* Save glyph width so that the subglyphs don't overwrite it. */ + FT_Pos glyph_width = decoder->glyph_width; + + + error = cff_operator_seac( decoder, + 0L, args[-4], args[-3], + (FT_Int)( args[-2] >> 16 ), + (FT_Int)( args[-1] >> 16 ) ); + + decoder->glyph_width = glyph_width; + } + else + { + if ( !error ) + error = CFF_Err_Ok; + + cff_builder_close_contour( builder ); + + /* close hints recording session */ + if ( hinter ) + { + if ( hinter->close( hinter->hints, + builder->current->n_points ) ) + goto Syntax_Error; + + /* apply hints to the loaded glyph outline now */ + hinter->apply( hinter->hints, + builder->current, + (PSH_Globals)builder->hints_globals, + decoder->hint_mode ); + } + + /* add current outline to the glyph slot */ + FT_GlyphLoader_Add( builder->loader ); + } + + /* return now! */ + FT_TRACE4(( "\n" )); + return error; + + case cff_op_abs: + FT_TRACE4(( " abs\n" )); + + if ( args[0] < 0 ) + args[0] = -args[0]; + args++; + break; + + case cff_op_add: + FT_TRACE4(( " add\n" )); + + args[0] += args[1]; + args++; + break; + + case cff_op_sub: + FT_TRACE4(( " sub\n" )); + + args[0] -= args[1]; + args++; + break; + + case cff_op_div: + FT_TRACE4(( " div\n" )); + + args[0] = FT_DivFix( args[0], args[1] ); + args++; + break; + + case cff_op_neg: + FT_TRACE4(( " neg\n" )); + + args[0] = -args[0]; + args++; + break; + + case cff_op_random: + { + FT_Fixed Rand; + + + FT_TRACE4(( " rand\n" )); + + Rand = seed; + if ( Rand >= 0x8000L ) + Rand++; + + args[0] = Rand; + seed = FT_MulFix( seed, 0x10000L - seed ); + if ( seed == 0 ) + seed += 0x2873; + args++; + } + break; + + case cff_op_mul: + FT_TRACE4(( " mul\n" )); + + args[0] = FT_MulFix( args[0], args[1] ); + args++; + break; + + case cff_op_sqrt: + FT_TRACE4(( " sqrt\n" )); + + if ( args[0] > 0 ) + { + FT_Int count = 9; + FT_Fixed root = args[0]; + FT_Fixed new_root; + + + for (;;) + { + new_root = ( root + FT_DivFix( args[0], root ) + 1 ) >> 1; + if ( new_root == root || count <= 0 ) + break; + root = new_root; + } + args[0] = new_root; + } + else + args[0] = 0; + args++; + break; + + case cff_op_drop: + /* nothing */ + FT_TRACE4(( " drop\n" )); + + break; + + case cff_op_exch: + { + FT_Fixed tmp; + + + FT_TRACE4(( " exch\n" )); + + tmp = args[0]; + args[0] = args[1]; + args[1] = tmp; + args += 2; + } + break; + + case cff_op_index: + { + FT_Int idx = (FT_Int)( args[0] >> 16 ); + + + FT_TRACE4(( " index\n" )); + + if ( idx < 0 ) + idx = 0; + else if ( idx > num_args - 2 ) + idx = num_args - 2; + args[0] = args[-( idx + 1 )]; + args++; + } + break; + + case cff_op_roll: + { + FT_Int count = (FT_Int)( args[0] >> 16 ); + FT_Int idx = (FT_Int)( args[1] >> 16 ); + + + FT_TRACE4(( " roll\n" )); + + if ( count <= 0 ) + count = 1; + + args -= count; + if ( args < stack ) + goto Stack_Underflow; + + if ( idx >= 0 ) + { + while ( idx > 0 ) + { + FT_Fixed tmp = args[count - 1]; + FT_Int i; + + + for ( i = count - 2; i >= 0; i-- ) + args[i + 1] = args[i]; + args[0] = tmp; + idx--; + } + } + else + { + while ( idx < 0 ) + { + FT_Fixed tmp = args[0]; + FT_Int i; + + + for ( i = 0; i < count - 1; i++ ) + args[i] = args[i + 1]; + args[count - 1] = tmp; + idx++; + } + } + args += count; + } + break; + + case cff_op_dup: + FT_TRACE4(( " dup\n" )); + + args[1] = args[0]; + args += 2; + break; + + case cff_op_put: + { + FT_Fixed val = args[0]; + FT_Int idx = (FT_Int)( args[1] >> 16 ); + + + FT_TRACE4(( " put\n" )); + + if ( idx >= 0 && idx < CFF_MAX_TRANS_ELEMENTS ) + decoder->buildchar[idx] = val; + } + break; + + case cff_op_get: + { + FT_Int idx = (FT_Int)( args[0] >> 16 ); + FT_Fixed val = 0; + + + FT_TRACE4(( " get\n" )); + + if ( idx >= 0 && idx < CFF_MAX_TRANS_ELEMENTS ) + val = decoder->buildchar[idx]; + + args[0] = val; + args++; + } + break; + + case cff_op_store: + FT_TRACE4(( " store\n")); + + goto Unimplemented; + + case cff_op_load: + FT_TRACE4(( " load\n" )); + + goto Unimplemented; + + case cff_op_dotsection: + /* this operator is deprecated and ignored by the parser */ + FT_TRACE4(( " dotsection\n" )); + break; + + case cff_op_closepath: + /* this is an invalid Type 2 operator; however, there */ + /* exist fonts which are incorrectly converted from probably */ + /* Type 1 to CFF, and some parsers seem to accept it */ + + FT_TRACE4(( " closepath (invalid op)\n" )); + + args = stack; + break; + + case cff_op_hsbw: + /* this is an invalid Type 2 operator; however, there */ + /* exist fonts which are incorrectly converted from probably */ + /* Type 1 to CFF, and some parsers seem to accept it */ + + FT_TRACE4(( " hsbw (invalid op)\n" )); + + decoder->glyph_width = decoder->nominal_width + ( args[1] >> 16 ); + + decoder->builder.left_bearing.x = args[0]; + decoder->builder.left_bearing.y = 0; + + x = decoder->builder.pos_x + args[0]; + y = decoder->builder.pos_y; + args = stack; + break; + + case cff_op_sbw: + /* this is an invalid Type 2 operator; however, there */ + /* exist fonts which are incorrectly converted from probably */ + /* Type 1 to CFF, and some parsers seem to accept it */ + + FT_TRACE4(( " sbw (invalid op)\n" )); + + decoder->glyph_width = decoder->nominal_width + ( args[2] >> 16 ); + + decoder->builder.left_bearing.x = args[0]; + decoder->builder.left_bearing.y = args[1]; + + x = decoder->builder.pos_x + args[0]; + y = decoder->builder.pos_y + args[1]; + args = stack; + break; + + case cff_op_setcurrentpoint: + /* this is an invalid Type 2 operator; however, there */ + /* exist fonts which are incorrectly converted from probably */ + /* Type 1 to CFF, and some parsers seem to accept it */ + + FT_TRACE4(( " setcurrentpoint (invalid op)\n" )); + + x = decoder->builder.pos_x + args[0]; + y = decoder->builder.pos_y + args[1]; + args = stack; + break; + + case cff_op_callothersubr: + /* this is an invalid Type 2 operator; however, there */ + /* exist fonts which are incorrectly converted from probably */ + /* Type 1 to CFF, and some parsers seem to accept it */ + + FT_TRACE4(( " callothersubr (invalid op)\n" )); + + /* subsequent `pop' operands should add the arguments, */ + /* this is the implementation described for `unknown' other */ + /* subroutines in the Type1 spec. */ + /* */ + /* XXX Fix return arguments (see discussion below). */ + args -= 2 + ( args[-2] >> 16 ); + if ( args < stack ) + goto Stack_Underflow; + break; + + case cff_op_pop: + /* this is an invalid Type 2 operator; however, there */ + /* exist fonts which are incorrectly converted from probably */ + /* Type 1 to CFF, and some parsers seem to accept it */ + + FT_TRACE4(( " pop (invalid op)\n" )); + + /* XXX Increasing `args' is wrong: After a certain number of */ + /* `pop's we get a stack overflow. Reason for doing it is */ + /* code like this (actually found in a CFF font): */ + /* */ + /* 17 1 3 callothersubr */ + /* pop */ + /* callsubr */ + /* */ + /* Since we handle `callothersubr' as a no-op, and */ + /* `callsubr' needs at least one argument, `pop' can't be a */ + /* no-op too as it basically should be. */ + /* */ + /* The right solution would be to provide real support for */ + /* `callothersubr' as done in `t1decode.c', however, given */ + /* the fact that CFF fonts with `pop' are invalid, it is */ + /* questionable whether it is worth the time. */ + args++; + break; + + case cff_op_and: + { + FT_Fixed cond = args[0] && args[1]; + + + FT_TRACE4(( " and\n" )); + + args[0] = cond ? 0x10000L : 0; + args++; + } + break; + + case cff_op_or: + { + FT_Fixed cond = args[0] || args[1]; + + + FT_TRACE4(( " or\n" )); + + args[0] = cond ? 0x10000L : 0; + args++; + } + break; + + case cff_op_eq: + { + FT_Fixed cond = !args[0]; + + + FT_TRACE4(( " eq\n" )); + + args[0] = cond ? 0x10000L : 0; + args++; + } + break; + + case cff_op_ifelse: + { + FT_Fixed cond = ( args[2] <= args[3] ); + + + FT_TRACE4(( " ifelse\n" )); + + if ( !cond ) + args[0] = args[1]; + args++; + } + break; + + case cff_op_callsubr: + { + FT_UInt idx = (FT_UInt)( ( args[0] >> 16 ) + + decoder->locals_bias ); + + + FT_TRACE4(( " callsubr(%d)\n", idx )); + + if ( idx >= decoder->num_locals ) + { + FT_ERROR(( "cff_decoder_parse_charstrings:" + " invalid local subr index\n" )); + goto Syntax_Error; + } + + if ( zone - decoder->zones >= CFF_MAX_SUBRS_CALLS ) + { + FT_ERROR(( "cff_decoder_parse_charstrings:" + " too many nested subrs\n" )); + goto Syntax_Error; + } + + zone->cursor = ip; /* save current instruction pointer */ + + zone++; + zone->base = decoder->locals[idx]; + zone->limit = decoder->locals[idx + 1]; + zone->cursor = zone->base; + + if ( !zone->base || zone->limit == zone->base ) + { + FT_ERROR(( "cff_decoder_parse_charstrings:" + " invoking empty subrs\n" )); + goto Syntax_Error; + } + + decoder->zone = zone; + ip = zone->base; + limit = zone->limit; + } + break; + + case cff_op_callgsubr: + { + FT_UInt idx = (FT_UInt)( ( args[0] >> 16 ) + + decoder->globals_bias ); + + + FT_TRACE4(( " callgsubr(%d)\n", idx )); + + if ( idx >= decoder->num_globals ) + { + FT_ERROR(( "cff_decoder_parse_charstrings:" + " invalid global subr index\n" )); + goto Syntax_Error; + } + + if ( zone - decoder->zones >= CFF_MAX_SUBRS_CALLS ) + { + FT_ERROR(( "cff_decoder_parse_charstrings:" + " too many nested subrs\n" )); + goto Syntax_Error; + } + + zone->cursor = ip; /* save current instruction pointer */ + + zone++; + zone->base = decoder->globals[idx]; + zone->limit = decoder->globals[idx + 1]; + zone->cursor = zone->base; + + if ( !zone->base || zone->limit == zone->base ) + { + FT_ERROR(( "cff_decoder_parse_charstrings:" + " invoking empty subrs\n" )); + goto Syntax_Error; + } + + decoder->zone = zone; + ip = zone->base; + limit = zone->limit; + } + break; + + case cff_op_return: + FT_TRACE4(( " return\n" )); + + if ( decoder->zone <= decoder->zones ) + { + FT_ERROR(( "cff_decoder_parse_charstrings:" + " unexpected return\n" )); + goto Syntax_Error; + } + + decoder->zone--; + zone = decoder->zone; + ip = zone->cursor; + limit = zone->limit; + break; + + default: + Unimplemented: + FT_ERROR(( "Unimplemented opcode: %d", ip[-1] )); + + if ( ip[-1] == 12 ) + FT_ERROR(( " %d", ip[0] )); + FT_ERROR(( "\n" )); + + return CFF_Err_Unimplemented_Feature; + } + + decoder->top = args; + + if ( decoder->top - stack >= CFF_MAX_OPERANDS ) + goto Stack_Overflow; + + } /* general operator processing */ + + } /* while ip < limit */ + + FT_TRACE4(( "..end..\n\n" )); + + Fail: + return error; + + Syntax_Error: + FT_TRACE4(( "cff_decoder_parse_charstrings: syntax error\n" )); + return CFF_Err_Invalid_File_Format; + + Stack_Underflow: + FT_TRACE4(( "cff_decoder_parse_charstrings: stack underflow\n" )); + return CFF_Err_Too_Few_Arguments; + + Stack_Overflow: + FT_TRACE4(( "cff_decoder_parse_charstrings: stack overflow\n" )); + return CFF_Err_Stack_Overflow; + } + + + /*************************************************************************/ + /*************************************************************************/ + /*************************************************************************/ + /********** *********/ + /********** *********/ + /********** COMPUTE THE MAXIMUM ADVANCE WIDTH *********/ + /********** *********/ + /********** The following code is in charge of computing *********/ + /********** the maximum advance width of the font. It *********/ + /********** quickly processes each glyph charstring to *********/ + /********** extract the value from either a `sbw' or `seac' *********/ + /********** operator. *********/ + /********** *********/ + /*************************************************************************/ + /*************************************************************************/ + /*************************************************************************/ + + +#if 0 /* unused until we support pure CFF fonts */ + + + FT_LOCAL_DEF( FT_Error ) + cff_compute_max_advance( TT_Face face, + FT_Int* max_advance ) + { + FT_Error error = CFF_Err_Ok; + CFF_Decoder decoder; + FT_Int glyph_index; + CFF_Font cff = (CFF_Font)face->other; + + + *max_advance = 0; + + /* Initialize load decoder */ + cff_decoder_init( &decoder, face, 0, 0, 0, 0 ); + + decoder.builder.metrics_only = 1; + decoder.builder.load_points = 0; + + /* For each glyph, parse the glyph charstring and extract */ + /* the advance width. */ + for ( glyph_index = 0; glyph_index < face->root.num_glyphs; + glyph_index++ ) + { + FT_Byte* charstring; + FT_ULong charstring_len; + + + /* now get load the unscaled outline */ + error = cff_get_glyph_data( face, glyph_index, + &charstring, &charstring_len ); + if ( !error ) + { + error = cff_decoder_prepare( &decoder, size, glyph_index ); + if ( !error ) + error = cff_decoder_parse_charstrings( &decoder, + charstring, + charstring_len ); + + cff_free_glyph_data( face, &charstring, &charstring_len ); + } + + /* ignore the error if one has occurred -- skip to next glyph */ + error = CFF_Err_Ok; + } + + *max_advance = decoder.builder.advance.x; + + return CFF_Err_Ok; + } + + +#endif /* 0 */ + + + FT_LOCAL_DEF( FT_Error ) + cff_slot_load( CFF_GlyphSlot glyph, + CFF_Size size, + FT_UInt glyph_index, + FT_Int32 load_flags ) + { + FT_Error error; + CFF_Decoder decoder; + TT_Face face = (TT_Face)glyph->root.face; + FT_Bool hinting, force_scaling; + CFF_Font cff = (CFF_Font)face->extra.data; + + FT_Matrix font_matrix; + FT_Vector font_offset; + + + force_scaling = FALSE; + + /* in a CID-keyed font, consider `glyph_index' as a CID and map */ + /* it immediately to the real glyph_index -- if it isn't a */ + /* subsetted font, glyph_indices and CIDs are identical, though */ + if ( cff->top_font.font_dict.cid_registry != 0xFFFFU && + cff->charset.cids ) + { + /* don't handle CID 0 (.notdef) which is directly mapped to GID 0 */ + if ( glyph_index != 0 ) + { + glyph_index = cff_charset_cid_to_gindex( &cff->charset, + glyph_index ); + if ( glyph_index == 0 ) + return CFF_Err_Invalid_Argument; + } + } + else if ( glyph_index >= cff->num_glyphs ) + return CFF_Err_Invalid_Argument; + + if ( load_flags & FT_LOAD_NO_RECURSE ) + load_flags |= FT_LOAD_NO_SCALE | FT_LOAD_NO_HINTING; + + glyph->x_scale = 0x10000L; + glyph->y_scale = 0x10000L; + if ( size ) + { + glyph->x_scale = size->root.metrics.x_scale; + glyph->y_scale = size->root.metrics.y_scale; + } + +#ifdef TT_CONFIG_OPTION_EMBEDDED_BITMAPS + + /* try to load embedded bitmap if any */ + /* */ + /* XXX: The convention should be emphasized in */ + /* the documents because it can be confusing. */ + if ( size ) + { + CFF_Face cff_face = (CFF_Face)size->root.face; + SFNT_Service sfnt = (SFNT_Service)cff_face->sfnt; + FT_Stream stream = cff_face->root.stream; + + + if ( size->strike_index != 0xFFFFFFFFUL && + sfnt->load_eblc && + ( load_flags & FT_LOAD_NO_BITMAP ) == 0 ) + { + TT_SBit_MetricsRec metrics; + + + error = sfnt->load_sbit_image( face, + size->strike_index, + glyph_index, + (FT_Int)load_flags, + stream, + &glyph->root.bitmap, + &metrics ); + + if ( !error ) + { + glyph->root.outline.n_points = 0; + glyph->root.outline.n_contours = 0; + + glyph->root.metrics.width = (FT_Pos)metrics.width << 6; + glyph->root.metrics.height = (FT_Pos)metrics.height << 6; + + glyph->root.metrics.horiBearingX = (FT_Pos)metrics.horiBearingX << 6; + glyph->root.metrics.horiBearingY = (FT_Pos)metrics.horiBearingY << 6; + glyph->root.metrics.horiAdvance = (FT_Pos)metrics.horiAdvance << 6; + + glyph->root.metrics.vertBearingX = (FT_Pos)metrics.vertBearingX << 6; + glyph->root.metrics.vertBearingY = (FT_Pos)metrics.vertBearingY << 6; + glyph->root.metrics.vertAdvance = (FT_Pos)metrics.vertAdvance << 6; + + glyph->root.format = FT_GLYPH_FORMAT_BITMAP; + + if ( load_flags & FT_LOAD_VERTICAL_LAYOUT ) + { + glyph->root.bitmap_left = metrics.vertBearingX; + glyph->root.bitmap_top = metrics.vertBearingY; + } + else + { + glyph->root.bitmap_left = metrics.horiBearingX; + glyph->root.bitmap_top = metrics.horiBearingY; + } + return error; + } + } + } + +#endif /* TT_CONFIG_OPTION_EMBEDDED_BITMAPS */ + + /* return immediately if we only want the embedded bitmaps */ + if ( load_flags & FT_LOAD_SBITS_ONLY ) + return CFF_Err_Invalid_Argument; + + /* if we have a CID subfont, use its matrix (which has already */ + /* been multiplied with the root matrix) */ + + /* this scaling is only relevant if the PS hinter isn't active */ + if ( cff->num_subfonts ) + { + FT_ULong top_upm, sub_upm; + FT_Byte fd_index = cff_fd_select_get( &cff->fd_select, + glyph_index ); + + if ( fd_index >= cff->num_subfonts ) + fd_index = (FT_Byte)( cff->num_subfonts - 1 ); + + top_upm = cff->top_font.font_dict.units_per_em; + sub_upm = cff->subfonts[fd_index]->font_dict.units_per_em; + + + font_matrix = cff->subfonts[fd_index]->font_dict.font_matrix; + font_offset = cff->subfonts[fd_index]->font_dict.font_offset; + + if ( top_upm != sub_upm ) + { + glyph->x_scale = FT_MulDiv( glyph->x_scale, top_upm, sub_upm ); + glyph->y_scale = FT_MulDiv( glyph->y_scale, top_upm, sub_upm ); + + force_scaling = TRUE; + } + } + else + { + font_matrix = cff->top_font.font_dict.font_matrix; + font_offset = cff->top_font.font_dict.font_offset; + } + + glyph->root.outline.n_points = 0; + glyph->root.outline.n_contours = 0; + + hinting = FT_BOOL( ( load_flags & FT_LOAD_NO_SCALE ) == 0 && + ( load_flags & FT_LOAD_NO_HINTING ) == 0 ); + + glyph->root.format = FT_GLYPH_FORMAT_OUTLINE; /* by default */ + + { + FT_Byte* charstring; + FT_ULong charstring_len; + + + cff_decoder_init( &decoder, face, size, glyph, hinting, + FT_LOAD_TARGET_MODE( load_flags ) ); + + if ( load_flags & FT_LOAD_ADVANCE_ONLY ) + decoder.width_only = TRUE; + + decoder.builder.no_recurse = + (FT_Bool)( load_flags & FT_LOAD_NO_RECURSE ); + + /* now load the unscaled outline */ + error = cff_get_glyph_data( face, glyph_index, + &charstring, &charstring_len ); + if ( error ) + goto Glyph_Build_Finished; + + error = cff_decoder_prepare( &decoder, size, glyph_index ); + if ( error ) + goto Glyph_Build_Finished; + + error = cff_decoder_parse_charstrings( &decoder, + charstring, + charstring_len ); + + cff_free_glyph_data( face, &charstring, charstring_len ); + + if ( error ) + goto Glyph_Build_Finished; + +#ifdef FT_CONFIG_OPTION_INCREMENTAL + /* Control data and length may not be available for incremental */ + /* fonts. */ + if ( face->root.internal->incremental_interface ) + { + glyph->root.control_data = 0; + glyph->root.control_len = 0; + } + else +#endif /* FT_CONFIG_OPTION_INCREMENTAL */ + + /* We set control_data and control_len if charstrings is loaded. */ + /* See how charstring loads at cff_index_access_element() in */ + /* cffload.c. */ + { + CFF_Index csindex = &cff->charstrings_index; + + + if ( csindex->offsets ) + { + glyph->root.control_data = csindex->bytes + + csindex->offsets[glyph_index] - 1; + glyph->root.control_len = charstring_len; + } + } + + Glyph_Build_Finished: + /* save new glyph tables, if no error */ + if ( !error ) + cff_builder_done( &decoder.builder ); + /* XXX: anything to do for broken glyph entry? */ + } + +#ifdef FT_CONFIG_OPTION_INCREMENTAL + + /* Incremental fonts can optionally override the metrics. */ + if ( !error && + face->root.internal->incremental_interface && + face->root.internal->incremental_interface->funcs->get_glyph_metrics ) + { + FT_Incremental_MetricsRec metrics; + + + metrics.bearing_x = decoder.builder.left_bearing.x; + metrics.bearing_y = 0; + metrics.advance = decoder.builder.advance.x; + metrics.advance_v = decoder.builder.advance.y; + + error = face->root.internal->incremental_interface->funcs->get_glyph_metrics( + face->root.internal->incremental_interface->object, + glyph_index, FALSE, &metrics ); + + decoder.builder.left_bearing.x = metrics.bearing_x; + decoder.builder.advance.x = metrics.advance; + decoder.builder.advance.y = metrics.advance_v; + } + +#endif /* FT_CONFIG_OPTION_INCREMENTAL */ + + if ( !error ) + { + /* Now, set the metrics -- this is rather simple, as */ + /* the left side bearing is the xMin, and the top side */ + /* bearing the yMax. */ + + /* For composite glyphs, return only left side bearing and */ + /* advance width. */ + if ( load_flags & FT_LOAD_NO_RECURSE ) + { + FT_Slot_Internal internal = glyph->root.internal; + + + glyph->root.metrics.horiBearingX = decoder.builder.left_bearing.x; + glyph->root.metrics.horiAdvance = decoder.glyph_width; + internal->glyph_matrix = font_matrix; + internal->glyph_delta = font_offset; + internal->glyph_transformed = 1; + } + else + { + FT_BBox cbox; + FT_Glyph_Metrics* metrics = &glyph->root.metrics; + FT_Vector advance; + FT_Bool has_vertical_info; + + + /* copy the _unscaled_ advance width */ + metrics->horiAdvance = decoder.glyph_width; + glyph->root.linearHoriAdvance = decoder.glyph_width; + glyph->root.internal->glyph_transformed = 0; + +#ifdef FT_CONFIG_OPTION_OLD_INTERNALS + has_vertical_info = FT_BOOL( face->vertical_info && + face->vertical.number_Of_VMetrics > 0 && + face->vertical.long_metrics ); +#else + has_vertical_info = FT_BOOL( face->vertical_info && + face->vertical.number_Of_VMetrics > 0 ); +#endif + + /* get the vertical metrics from the vtmx table if we have one */ + if ( has_vertical_info ) + { + FT_Short vertBearingY = 0; + FT_UShort vertAdvance = 0; + + + ( (SFNT_Service)face->sfnt )->get_metrics( face, 1, + glyph_index, + &vertBearingY, + &vertAdvance ); + metrics->vertBearingY = vertBearingY; + metrics->vertAdvance = vertAdvance; + } + else + { + /* make up vertical ones */ + if ( face->os2.version != 0xFFFFU ) + metrics->vertAdvance = (FT_Pos)( face->os2.sTypoAscender - + face->os2.sTypoDescender ); + else + metrics->vertAdvance = (FT_Pos)( face->horizontal.Ascender - + face->horizontal.Descender ); + } + + glyph->root.linearVertAdvance = metrics->vertAdvance; + + glyph->root.format = FT_GLYPH_FORMAT_OUTLINE; + + glyph->root.outline.flags = 0; + if ( size && size->root.metrics.y_ppem < 24 ) + glyph->root.outline.flags |= FT_OUTLINE_HIGH_PRECISION; + + glyph->root.outline.flags |= FT_OUTLINE_REVERSE_FILL; + + if ( !( font_matrix.xx == 0x10000L && + font_matrix.yy == 0x10000L && + font_matrix.xy == 0 && + font_matrix.yx == 0 ) ) + FT_Outline_Transform( &glyph->root.outline, &font_matrix ); + + if ( !( font_offset.x == 0 && + font_offset.y == 0 ) ) + FT_Outline_Translate( &glyph->root.outline, + font_offset.x, font_offset.y ); + + advance.x = metrics->horiAdvance; + advance.y = 0; + FT_Vector_Transform( &advance, &font_matrix ); + metrics->horiAdvance = advance.x + font_offset.x; + + advance.x = 0; + advance.y = metrics->vertAdvance; + FT_Vector_Transform( &advance, &font_matrix ); + metrics->vertAdvance = advance.y + font_offset.y; + + if ( ( load_flags & FT_LOAD_NO_SCALE ) == 0 || force_scaling ) + { + /* scale the outline and the metrics */ + FT_Int n; + FT_Outline* cur = &glyph->root.outline; + FT_Vector* vec = cur->points; + FT_Fixed x_scale = glyph->x_scale; + FT_Fixed y_scale = glyph->y_scale; + + + /* First of all, scale the points */ + if ( !hinting || !decoder.builder.hints_funcs ) + for ( n = cur->n_points; n > 0; n--, vec++ ) + { + vec->x = FT_MulFix( vec->x, x_scale ); + vec->y = FT_MulFix( vec->y, y_scale ); + } + + /* Then scale the metrics */ + metrics->horiAdvance = FT_MulFix( metrics->horiAdvance, x_scale ); + metrics->vertAdvance = FT_MulFix( metrics->vertAdvance, y_scale ); + } + + /* compute the other metrics */ + FT_Outline_Get_CBox( &glyph->root.outline, &cbox ); + + metrics->width = cbox.xMax - cbox.xMin; + metrics->height = cbox.yMax - cbox.yMin; + + metrics->horiBearingX = cbox.xMin; + metrics->horiBearingY = cbox.yMax; + + if ( has_vertical_info ) + metrics->vertBearingX = metrics->horiBearingX - + metrics->horiAdvance / 2; + else + { + if ( load_flags & FT_LOAD_VERTICAL_LAYOUT ) + ft_synthesize_vertical_metrics( metrics, + metrics->vertAdvance ); + } + } + } + + return error; + } + + +/* END */ |