summaryrefslogtreecommitdiff
path: root/Build/source/extra/xz/po/cs.po
diff options
context:
space:
mode:
Diffstat (limited to 'Build/source/extra/xz/po/cs.po')
-rw-r--r--Build/source/extra/xz/po/cs.po566
1 files changed, 409 insertions, 157 deletions
diff --git a/Build/source/extra/xz/po/cs.po b/Build/source/extra/xz/po/cs.po
index bbeaff599f7..28292a1d257 100644
--- a/Build/source/extra/xz/po/cs.po
+++ b/Build/source/extra/xz/po/cs.po
@@ -1,9 +1,13 @@
+# XZ Utils Czech translation
+# This file is put in the public domain.
+# Marek Černocký <marek@manet.cz>, 2010.
+#
msgid ""
msgstr ""
"Project-Id-Version: xz-utils\n"
"Report-Msgid-Bugs-To: lasse.collin@tukaani.org\n"
-"POT-Creation-Date: 2010-06-11 10:41+0300\n"
-"PO-Revision-Date: 2009-12-05 13:51+0100\n"
+"POT-Creation-Date: 2011-04-01 08:48+0300\n"
+"PO-Revision-Date: 2010-12-03 11:32+0100\n"
"Last-Translator: Marek Černocký <marek@manet.cz>\n"
"Language-Team: Czech <diskuze@lists.l10n.cz>\n"
"Language: cs\n"
@@ -14,33 +18,32 @@ msgstr ""
"X-Poedit-Language: Czech\n"
"X-Poedit-SourceCharset: utf-8\n"
-#: src/xz/args.c:303
+#: src/xz/args.c:333
#, c-format
msgid "%s: Unknown file format type"
msgstr "%s: Neznámý typ formátu souboru"
-#: src/xz/args.c:326 src/xz/args.c:334
+#: src/xz/args.c:356 src/xz/args.c:364
#, c-format
msgid "%s: Unsupported integrity check type"
msgstr "%s: Neznámý typ kontroly integrity"
-#: src/xz/args.c:352
-#, fuzzy
+#: src/xz/args.c:382
msgid "Only one file can be specified with `--files' or `--files0'."
-msgstr "Můžete zadat pouze jeden soubor spolu s přepínači „--files“ nebo „--files0“"
+msgstr "Spolu s přepínači „--files“ nebo „--files0“ může být zadán pouze jeden soubor"
-#: src/xz/args.c:411
-msgid "The environment variable XZ_OPT contains too many arguments"
-msgstr "Proměnná prostředí XZ_OPT obsahuje příliš mnoho argumentů"
+#: src/xz/args.c:445
+#, c-format
+msgid "The environment variable %s contains too many arguments"
+msgstr "Proměnná prostředí %s obsahuje příliš mnoho argumentů"
#: src/xz/coder.c:95
msgid "Maximum number of filters is four"
msgstr "Maximální počet filtrů je čtyři"
#: src/xz/coder.c:108
-#, fuzzy
msgid "Memory usage limit is too low for the given filter setup."
-msgstr "Omezení použitelné paměti (%<PRIu64> MiB) je příliš malé pro dané nastavení filtru (%<PRIu64> MiB)"
+msgstr "Omezení použitelné paměti je příliš malé pro dané nastavení filtru."
#: src/xz/coder.c:129
msgid "Using a preset in raw mode is discouraged."
@@ -50,23 +53,27 @@ msgstr "Použití přednastavení v režimu raw je nevhodné."
msgid "The exact options of the presets may vary between software versions."
msgstr "Přesné volby u přednastavení se mohou lišit mezi různými verzemi softwaru."
-#: src/xz/coder.c:159
+#: src/xz/coder.c:157
msgid "The .lzma format supports only the LZMA1 filter"
msgstr "Formát .lzma podporuje pouze filtr LZMA1"
-#: src/xz/coder.c:167
+#: src/xz/coder.c:165
msgid "LZMA1 cannot be used with the .xz format"
msgstr "LZMA1 nelze použít s formátem .xz"
-#: src/xz/coder.c:184
-#, fuzzy
+#: src/xz/coder.c:182
msgid "Unsupported filter chain or filter options"
-msgstr "Nepodporovaná volba"
+msgstr "Nepodporovaný omezující filtr nebo volby filtru"
+
+#: src/xz/coder.c:190
+#, c-format
+msgid "Decompression will need %s MiB of memory."
+msgstr "Dekomprimace bude vyžadovat %s MiB paměti."
-#: src/xz/coder.c:245
+#: src/xz/coder.c:247
#, c-format
msgid "Adjusted LZMA%c dictionary size from %s MiB to %s MiB to not exceed the memory usage limit of %s MiB"
-msgstr ""
+msgstr "Přizpůsobit velikost slovníku LZMA%c z %s MiB na %s MiB, tak aby nebylo překročeno omezení použitelné paměti %s MiB"
#. TRANSLATORS: When compression or decompression finishes,
#. and xz is going to remove the source file, xz first checks
@@ -79,9 +86,9 @@ msgstr ""
#. of the original file, and in that case it obviously
#. shouldn't be removed.
#: src/xz/file_io.c:137
-#, fuzzy, c-format
+#, c-format
msgid "%s: File seems to have been moved, not removing"
-msgstr "%s: Vypadá to, že soubor byl přesunut, neodstraní se"
+msgstr "%s: Vypadá to, že soubor byl přesunut, proto nebude odstraněn"
#: src/xz/file_io.c:144 src/xz/file_io.c:589
#, c-format
@@ -103,12 +110,12 @@ msgstr "%s: Nelze nastavit skupinu souboru: %s"
msgid "%s: Cannot set the file permissions: %s"
msgstr "%s: Nelze nastavit oprávnění souboru: %s"
-#: src/xz/file_io.c:337 src/xz/file_io.c:419
+#: src/xz/file_io.c:337 src/xz/file_io.c:420
#, c-format
msgid "%s: Is a symbolic link, skipping"
msgstr "%s: Jedná se o symbolický odkaz, vynechává se"
-#: src/xz/file_io.c:454
+#: src/xz/file_io.c:455
#, c-format
msgid "%s: Is a directory, skipping"
msgstr "%s: Jedná se o složku, vynechává se"
@@ -146,7 +153,7 @@ msgstr "%s: Selhalo zavření souboru: %s"
#: src/xz/file_io.c:761 src/xz/file_io.c:945
#, c-format
msgid "%s: Seeking failed when trying to create a sparse file: %s"
-msgstr "%s: Selhalo nastavení pozice při pokusu o vytvoření záložního souboru: %s"
+msgstr "%s: Selhalo nastavení pozice při pokusu o vytvoření souboru řídké matice: %s"
#: src/xz/file_io.c:820
#, c-format
@@ -154,20 +161,230 @@ msgid "%s: Read error: %s"
msgstr "%s: Chyba čtení: %s"
#: src/xz/file_io.c:843
-#, fuzzy, c-format
+#, c-format
msgid "%s: Error seeking the file: %s"
-msgstr "%s: Chyba při čtení názvů souborů: %s"
+msgstr "%s: Chyba při posunu v rámci souboru: %s"
#: src/xz/file_io.c:853
-#, fuzzy, c-format
+#, c-format
msgid "%s: Unexpected end of file"
-msgstr "Neočekávaný konec vstupu"
+msgstr "%s: Neočekávaný konec souboru"
#: src/xz/file_io.c:903
#, c-format
msgid "%s: Write error: %s"
msgstr "%s: Chyba zápisu: %s"
+#: src/xz/hardware.c:100
+msgid "Disabled"
+msgstr "Vypnuto"
+
+#. TRANSLATORS: Test with "xz --info-memory" to see if
+#. the alignment looks nice.
+#: src/xz/hardware.c:119
+msgid "Total amount of physical memory (RAM): "
+msgstr "Celkové množství fyzické paměti (RAM): "
+
+#: src/xz/hardware.c:121
+msgid "Memory usage limit for compression: "
+msgstr "Omezení použitelné paměti pro komprimaci: "
+
+#: src/xz/hardware.c:123
+msgid "Memory usage limit for decompression: "
+msgstr "Omezení použitelné paměti pro dekomprimaci:"
+
+#. TRANSLATORS: Indicates that there is no integrity check.
+#. This string is used in tables, so the width must not
+#. exceed ten columns with a fixed-width font.
+#: src/xz/list.c:62
+msgid "None"
+msgstr "žádná"
+
+#. TRANSLATORS: Indicates that integrity check name is not known,
+#. but the Check ID is known (here 2). This and other "Unknown-N"
+#. strings are used in tables, so the width must not exceed ten
+#. columns with a fixed-width font. It's OK to omit the dash if
+#. you need space for one extra letter, but don't use spaces.
+#: src/xz/list.c:69
+msgid "Unknown-2"
+msgstr "neznámá-2"
+
+#: src/xz/list.c:70
+msgid "Unknown-3"
+msgstr "neznámá-3"
+
+#: src/xz/list.c:72
+msgid "Unknown-5"
+msgstr "neznámá-5"
+
+#: src/xz/list.c:73
+msgid "Unknown-6"
+msgstr "neznámá-6"
+
+#: src/xz/list.c:74
+msgid "Unknown-7"
+msgstr "neznámá-7"
+
+#: src/xz/list.c:75
+msgid "Unknown-8"
+msgstr "neznámá-8"
+
+#: src/xz/list.c:76
+msgid "Unknown-9"
+msgstr "neznámá-9"
+
+#: src/xz/list.c:78
+msgid "Unknown-11"
+msgstr "neznámá-11"
+
+#: src/xz/list.c:79
+msgid "Unknown-12"
+msgstr "neznámá-12"
+
+#: src/xz/list.c:80
+msgid "Unknown-13"
+msgstr "neznámá-13"
+
+#: src/xz/list.c:81
+msgid "Unknown-14"
+msgstr "neznámá-14"
+
+#: src/xz/list.c:82
+msgid "Unknown-15"
+msgstr "neznámá-15"
+
+#: src/xz/list.c:126
+#, c-format
+msgid "%s: File is empty"
+msgstr "%s: Soubor je prázdný"
+
+#: src/xz/list.c:131
+#, c-format
+msgid "%s: Too small to be a valid .xz file"
+msgstr "%s: Je příliš malý na to, aby to mohl být platný soubor .xz"
+
+#. TRANSLATORS: These are column headings. From Strms (Streams)
+#. to Ratio, the columns are right aligned. Check and Filename
+#. are left aligned. If you need longer words, it's OK to
+#. use two lines here. Test with "xz -l foo.xz".
+#: src/xz/list.c:612
+msgid "Strms Blocks Compressed Uncompressed Ratio Check Filename"
+msgstr "Proud Bloky Komprim Nekomprim Poměr Kontrl Název souboru"
+
+#: src/xz/list.c:652
+#, c-format
+msgid " Streams: %s\n"
+msgstr " Proudů: %s\n"
+
+#: src/xz/list.c:654
+#, c-format
+msgid " Blocks: %s\n"
+msgstr " Bloků: %s\n"
+
+#: src/xz/list.c:656
+#, c-format
+msgid " Compressed size: %s\n"
+msgstr " Komprimovaná velikost: %s\n"
+
+#: src/xz/list.c:659
+#, c-format
+msgid " Uncompressed size: %s\n"
+msgstr " Nekomprimovaná velikost: %s\n"
+
+#: src/xz/list.c:662
+#, c-format
+msgid " Ratio: %s\n"
+msgstr " Poměr komprimace: %s\n"
+
+#: src/xz/list.c:664
+#, c-format
+msgid " Check: %s\n"
+msgstr " Typ kontroly: %s\n"
+
+#: src/xz/list.c:665
+#, c-format
+msgid " Stream padding: %s\n"
+msgstr " Zarovnání proudu: %s\n"
+
+#. TRANSLATORS: The second line is column headings. All except
+#. Check are right aligned; Check is left aligned. Test with
+#. "xz -lv foo.xz".
+#: src/xz/list.c:693
+msgid ""
+" Streams:\n"
+" Stream Blocks CompOffset UncompOffset CompSize UncompSize Ratio Check Padding"
+msgstr ""
+" Proudy:\n"
+" Proud Bloky KomprPozice NekomprPozice KomprVelikost NekomprVelikost Poměr Kontrola Zarovnání"
+
+#. TRANSLATORS: The second line is column headings. All
+#. except Check are right aligned; Check is left aligned.
+#: src/xz/list.c:748
+#, c-format
+msgid ""
+" Blocks:\n"
+" Stream Block CompOffset UncompOffset TotalSize UncompSize Ratio Check"
+msgstr ""
+" Bloky:\n"
+" Proud Blok KomprPozice NekomprPozice CelkVelikost NekomprVelikost Poměr Kontrola"
+
+#. TRANSLATORS: These are additional column headings
+#. for the most verbose listing mode. CheckVal
+#. (Check value), Flags, and Filters are left aligned.
+#. Header (Block Header Size), CompSize, and MemUsage
+#. are right aligned. %*s is replaced with 0-120
+#. spaces to make the CheckVal column wide enough.
+#. Test with "xz -lvv foo.xz".
+#: src/xz/list.c:760
+#, c-format
+msgid " CheckVal %*s Header Flags CompSize MemUsage Filters"
+msgstr " KontrHod %*s Hlavič Příznaky KomprVel PoužiPam Filtry"
+
+#: src/xz/list.c:838 src/xz/list.c:1007
+#, c-format
+msgid " Memory needed: %s MiB\n"
+msgstr " Potřebná paměť: %s MiB\n"
+
+#: src/xz/list.c:840 src/xz/list.c:1009
+#, c-format
+msgid " Sizes in headers: %s\n"
+msgstr " Velikosti v hlavičkách: %s\n"
+
+#: src/xz/list.c:841 src/xz/list.c:1010
+msgid "Yes"
+msgstr "Ano"
+
+#: src/xz/list.c:841 src/xz/list.c:1010
+msgid "No"
+msgstr "Ne"
+
+#. TRANSLATORS: %s is an integer. Only the plural form of this
+#. message is used (e.g. "2 files"). Test with "xz -l foo.xz bar.xz".
+#: src/xz/list.c:986
+#, c-format
+msgid "%s file\n"
+msgid_plural "%s files\n"
+msgstr[0] "%s soubor\n"
+msgstr[1] "%s soubory\n"
+msgstr[2] "%s souborů\n"
+
+#: src/xz/list.c:999
+msgid "Totals:"
+msgstr "Celkem:"
+
+#: src/xz/list.c:1000
+#, c-format
+msgid " Number of files: %s\n"
+msgstr " Počet souborů: %s\n"
+
+#: src/xz/list.c:1072
+msgid "--list works only on .xz files (--format=xz or --format=auto)"
+msgstr "--list pracuje pouze se soubory .xz (--format=xz nebo --format=auto)"
+
+#: src/xz/list.c:1078
+msgid "--list does not support reading from standard input"
+msgstr "--list nepodporuje čtení ze standardního vstupu"
+
#: src/xz/main.c:89
#, c-format
msgid "%s: Error reading filenames: %s"
@@ -191,63 +408,58 @@ msgstr "Komprimace a dekomprimace s přepínačem --robot není zatím podporova
msgid "Cannot read data from standard input when reading filenames from standard input"
msgstr "Ze standardního vstupu nelze číst data, když se ze standardního vstupu načítají názvy souborů"
-#: src/xz/message.c:788 src/xz/message.c:832
+#: src/xz/message.c:792 src/xz/message.c:842
msgid "Internal error (bug)"
msgstr "Interní chyba"
-#: src/xz/message.c:795
+#: src/xz/message.c:799
msgid "Cannot establish signal handlers"
msgstr "Nelze ustanovit ovladač signálu"
-#: src/xz/message.c:804
+#: src/xz/message.c:808
msgid "No integrity check; not verifying file integrity"
msgstr "Žádná kontrola integrity; integrita souboru se nebude ověřovat"
-#: src/xz/message.c:807
+#: src/xz/message.c:811
msgid "Unsupported type of integrity check; not verifying file integrity"
msgstr "Nepodporovaný typ kontroly integrity; integrita souboru se nebude ověřovat"
-#: src/xz/message.c:814
+#: src/xz/message.c:818
msgid "Memory usage limit reached"
msgstr "Dosaženo omezení použitelné paměti"
-#: src/xz/message.c:817
+#: src/xz/message.c:821
msgid "File format not recognized"
msgstr "Formát souboru nebyl rozpoznán"
-#: src/xz/message.c:820
+#: src/xz/message.c:824
msgid "Unsupported options"
msgstr "Nepodporovaná volba"
-#: src/xz/message.c:823
+#: src/xz/message.c:827
msgid "Compressed data is corrupt"
msgstr "Komprimovaná data jsou poškozená"
-#: src/xz/message.c:826
+#: src/xz/message.c:830
msgid "Unexpected end of input"
msgstr "Neočekávaný konec vstupu"
-#: src/xz/message.c:872
-#, fuzzy, c-format
+#: src/xz/message.c:881
+#, c-format
msgid "%s MiB of memory is required. The limit is %s."
-msgstr "Je vyžadováno %s MiB (%s B) paměti pro každé vlákno, limit je %s MiB (%s B)"
+msgstr "Je vyžadováno %s MiB paměti. Limit je %s."
-#: src/xz/message.c:1038
-#, fuzzy, c-format
+#: src/xz/message.c:1048
+#, c-format
msgid "%s: Filter chain: %s\n"
-msgstr "%s: Omezující filtr:"
+msgstr "%s: Omezující filtr: %s\n"
-#: src/xz/message.c:1049
+#: src/xz/message.c:1058
#, c-format
msgid "Try `%s --help' for more information."
msgstr "Zkuste „%s --help“ pro více informací"
-#: src/xz/message.c:1061
-#, c-format
-msgid "%s MiB (%s bytes)\n"
-msgstr "%s MiB (%s bajtů)\n"
-
-#: src/xz/message.c:1090
+#: src/xz/message.c:1084
#, c-format
msgid ""
"Usage: %s [OPTION]... [FILE]...\n"
@@ -258,27 +470,27 @@ msgstr ""
"Komprimuje nebo dekomprimuje SOUBORy ve formátu xz.\n"
"\n"
-#: src/xz/message.c:1094
+#: src/xz/message.c:1091
msgid "Mandatory arguments to long options are mandatory for short options too.\n"
msgstr "Povinné argumenty pro dlouhé přepínače jsou povinné rovněž pro krátké přepínače.\n"
-#: src/xz/message.c:1098
+#: src/xz/message.c:1095
msgid " Operation mode:\n"
msgstr "Operační režim:\n"
-#: src/xz/message.c:1101
+#: src/xz/message.c:1098
msgid ""
" -z, --compress force compression\n"
" -d, --decompress force decompression\n"
" -t, --test test compressed file integrity\n"
-" -l, --list list information about files"
+" -l, --list list information about .xz files"
msgstr ""
" -z, --compress provést komprimaci\n"
" -d, --decompress provést dekomprimaci\n"
" -t, --test testovat integritu komprimovaného souboru\n"
-" -l, --list vypsat informace o souborech"
+" -l, --list vypsat informace o souborech .xz"
-#: src/xz/message.c:1107
+#: src/xz/message.c:1104
msgid ""
"\n"
" Operation modifiers:\n"
@@ -286,7 +498,7 @@ msgstr ""
"\n"
"Modifikátory operací:\n"
-#: src/xz/message.c:1110
+#: src/xz/message.c:1107
msgid ""
" -k, --keep keep (don't delete) input files\n"
" -f, --force force overwrite of output file and (de)compress links\n"
@@ -296,23 +508,23 @@ msgstr ""
" -f, --force vynutit přepis výstupního souboru a de/komprimovat odkazy\n"
" -c, --stdout zapisovat na standardní výstup a nemazat vstupní soubory"
-#: src/xz/message.c:1116
+#: src/xz/message.c:1113
msgid ""
" --no-sparse do not create sparse files when decompressing\n"
" -S, --suffix=.SUF use the suffix `.SUF' on compressed files\n"
-" --files=[FILE] read filenames to process from FILE; if FILE is\n"
+" --files[=FILE] read filenames to process from FILE; if FILE is\n"
" omitted, filenames are read from the standard input;\n"
" filenames must be terminated with the newline character\n"
-" --files0=[FILE] like --files but use the null character as terminator"
+" --files0[=FILE] like --files but use the null character as terminator"
msgstr ""
-" --no-sparse nevytvářet při dekomprimaci záložní soubory\n"
-" -S, --suffix=.SUF použít u komprimovaných souborů příponu „.SUF“\n"
-" --files=[SOUBOR] číst názvy souborů, které se mají zpracovat, ze SOUBORu;\n"
+" --no-sparse nevytvářet při dekomprimaci soubory řídkých matic\n"
+" -S, --suffix=.PRIP použít u komprimovaných souborů příponu „.PRIP“\n"
+" --files[=SOUBOR] číst názvy souborů, které se mají zpracovat, ze SOUBORu;\n"
" pokud není SOUBOR zadán, čte se ze standardního vstupu;\n"
" názvy souborů musí být zakončeny znakem nového řádku\n"
-" --files0=[SOUBOR] stejné jako --files, ale použít k zakončování nulový znak"
+" --files0[=SOUBOR] stejné jako --files, ale použít k zakončování nulový znak"
-#: src/xz/message.c:1124
+#: src/xz/message.c:1121
msgid ""
"\n"
" Basic file format and compression options:\n"
@@ -320,44 +532,59 @@ msgstr ""
"\n"
"Základní přepínače pro formát souboru a komprimaci:\n"
-#: src/xz/message.c:1126
+#: src/xz/message.c:1123
msgid ""
" -F, --format=FMT file format to encode or decode; possible values are\n"
" `auto' (default), `xz', `lzma', and `raw'\n"
-" -C, --check=CHECK integrity check type: `crc32', `crc64' (default),\n"
-" `sha256', or `none' (use with caution)"
+" -C, --check=CHECK integrity check type: `none' (use with caution),\n"
+" `crc32', `crc64' (default), or `sha256'"
msgstr ""
" -F, --format=FORMÁT formát souboru k zakódování nebo dekódování; možné\n"
" hodnoty jsou „auto“ (výchozí), „xz“, „lzma“ a „raw“\n"
-" -C, --check=KONTROLA typ kontroly integrity: „crc32“, „crc64“ (výchozí),\n"
-" „sha256“ nebo „none“ (používejte s rozmyslem)"
+" -C, --check=KONTROLA typ kontroly integrity: „none“ (používejte s rozmyslem),\n"
+" „crc32“, „crc64“ (výchozí) nebo „sha256“"
-#: src/xz/message.c:1133
+#: src/xz/message.c:1130
msgid ""
-" -0 .. -9 compression preset; 0-2 fast compression, 3-5 good\n"
-" compression, 6-9 excellent compression; default is 6"
+" -0 ... -9 compression preset; default is 6; take compressor *and*\n"
+" decompressor memory usage into account before using 7-9!"
msgstr ""
-" -0 .. -9 přednastavení komprimace; 0-2 rychlá komprimace, 3-5\n"
-" dobrá komprimace, 6-9 skvělá komprimace; výchozí je 6"
+" -0 .. -9 přednastavení komprimace; výchozí je 6; než použijete\n"
+" hodnoty 7 – 9, vezměte do úvahy množství použité paměti"
-#: src/xz/message.c:1137
+#: src/xz/message.c:1134
msgid ""
-" -e, --extreme use more CPU time when encoding to increase compression\n"
-" ratio without increasing memory usage of the decoder"
+" -e, --extreme try to improve compression ratio by using more CPU time;\n"
+" does not affect decompressor memory requirements"
msgstr ""
-" -e, --extreme využít více procesorového času pro kódování, čímž se\n"
-" zvýší kompresní poměr bez zvýšení paměti použité kodérem"
+" -e, --extreme zkusit zlepšit poměr komprimace využitím více času\n"
+" procesoru; nemá vliv na paměťové nároky dekomprimace"
-#: src/xz/message.c:1142
+#: src/xz/message.c:1139
#, no-c-format
msgid ""
-" -M, --memory=NUM use roughly NUM bytes of memory at maximum; 0 indicates\n"
-" the default setting, which is 40 % of total RAM"
+" --memlimit-compress=LIMIT\n"
+" --memlimit-decompress=LIMIT\n"
+" -M, --memlimit=LIMIT\n"
+" set memory usage limit for compression, decompression,\n"
+" or both; LIMIT is in bytes, % of RAM, or 0 for defaults"
msgstr ""
-" -M, --memory=POČ použít zhruba POČ bajtů paměti jako maximum; 0 znamená\n"
-" výchozí nastavení, což je 40% celkového množství paměti"
+" --memlimit-compress=LIMIT\n"
+" --memlimit-decompress=LIMIT\n"
+" -M, --memlimit=LIMIT\n"
+" nastaví omezení použitelné paměti pro komprimaci,\n"
+" dekomprimaci nebo obojí; LIMIT je v bajtech, % z paměti\n"
+" RAM nebo 0 pro výchozí"
+
+#: src/xz/message.c:1146
+msgid ""
+" --no-adjust if compression settings exceed the memory usage limit,\n"
+" give an error instead of adjusting the settings downwards"
+msgstr ""
+" --no-adjust pokud nastavení komprimace přesáhne omezení použitelné\n"
+" paměti, předat chybu namísto snížení nastavení"
-#: src/xz/message.c:1147
+#: src/xz/message.c:1152
msgid ""
"\n"
" Custom filter chain for compression (alternative for using presets):"
@@ -365,12 +592,12 @@ msgstr ""
"\n"
"Vlastní omezující filtr pro komprimaci (alternativa k použití přednastavených):"
-#: src/xz/message.c:1152
+#: src/xz/message.c:1161
msgid ""
"\n"
" --lzma1[=OPTS] LZMA1 or LZMA2; OPTS is a comma-separated list of zero or\n"
" --lzma2[=OPTS] more of the following options (valid values; default):\n"
-" preset=NUM reset options to preset number NUM (0-9)\n"
+" preset=PRE reset options to a preset (0-9[e])\n"
" dict=NUM dictionary size (4KiB - 1536MiB; 8MiB)\n"
" lc=NUM number of literal context bits (0-4; 3)\n"
" lp=NUM number of literal position bits (0-4; 0)\n"
@@ -383,24 +610,23 @@ msgstr ""
"\n"
" --lzma1[=VOLBY] LZMA1 nebo LZMA2; VOLBY je čárkou oddělovaný seznam žádné\n"
" --lzma2[=VOLBY] nebo více následujících voleb (platné hodnoty; výchozí):\n"
-" preset=POČ obnovení voleb na přednastavený POČet (0-9)\n"
-" dict=POČ velikost slovníku (4 KiB - 1536 MiB; 8 MiB)\n"
-" lc=POČ počet kontextových bitů literálu (0-4; 3)\n"
-" lp=POČ počet pozičních bitů literálu (0-4; 0)\n"
-" pb=POČ počet pozičních bitů (0-4; 2)\n"
+" preset=PŘE změnit volby na PŘEdnastavené (0 – 9[e])\n"
+" dict=POČ velikost slovníku (4 KiB – 1536 MiB; 8 MiB)\n"
+" lc=POČ počet kontextových bitů literálu (0 – 4; 3)\n"
+" lp=POČ počet pozičních bitů literálu (0 – 4; 0)\n"
+" pb=POČ počet pozičních bitů (0 – 4; 2)\n"
" mode=REŽIM režim komprimace (fast, normal; normal)\n"
-" nice=POČ příznivá délka shody (2-273; 64)\n"
-" mf=NÁZEV vyhledávač shod (hc3, hc4, bt2, bt3, bt4;\n"
-" bt4)\n"
+" nice=NUM příznivá délka shody (2 – 273; 64)\n"
+" mf=NÁZEV hledání shod (hc3, hc4, bt2, bt3, bt4; bt4)\n"
" depth=POČ maximální hloubka prohledávání;\n"
-" 0=automaticky (výchozí)"
+" 0 = automaticky (výchozí)"
-#: src/xz/message.c:1167
+#: src/xz/message.c:1176
msgid ""
"\n"
-" --x86[=OPTS] x86 BCJ filter\n"
+" --x86[=OPTS] x86 BCJ filter (32-bit and 64-bit)\n"
" --powerpc[=OPTS] PowerPC BCJ filter (big endian only)\n"
-" --ia64[=OPTS] IA64 (Itanium) BCJ filter\n"
+" --ia64[=OPTS] IA-64 (Itanium) BCJ filter\n"
" --arm[=OPTS] ARM BCJ filter (little endian only)\n"
" --armthumb[=OPTS] ARM-Thumb BCJ filter (little endian only)\n"
" --sparc[=OPTS] SPARC BCJ filter\n"
@@ -408,7 +634,7 @@ msgid ""
" start=NUM start offset for conversions (default=0)"
msgstr ""
"\n"
-" --x86[=VOLBY] Filtr x86 BCJ\n"
+" --x86[=VOLBY] Filtr x86 BCJ (32bitový a 64bitový)\n"
" --powerpc[=VOLBY] Filtr PowerPC BCJ (pouze big endian)\n"
" --ia64[=VOLBY] Filtr IA64 (Itanium) BCJ\n"
" --arm[=VOLBY] Filtr ARM BCJ (pouze little endian)\n"
@@ -417,7 +643,7 @@ msgstr ""
" Platné volby pro všechny filtry BCJ:\n"
" start=POČ počáteční posun pro převody (výchozí=0)"
-#: src/xz/message.c:1179
+#: src/xz/message.c:1188
msgid ""
"\n"
" --delta[=OPTS] Delta filter; valid OPTS (valid values; default):\n"
@@ -427,9 +653,9 @@ msgstr ""
"\n"
" --delta[=VOLBY] Filtr Delta; platné VOLBY (platné hodnoty; výchozí):\n"
" dist=POČ vzdálenost mezi bajty, které jsou odečítány\n"
-" jeden od druhého (1-256; 1)"
+" jeden od druhého (1 – 256; 1)"
-#: src/xz/message.c:1187
+#: src/xz/message.c:1196
msgid ""
"\n"
" Other options:\n"
@@ -437,7 +663,7 @@ msgstr ""
"\n"
" Ostatní přepínače:\n"
-#: src/xz/message.c:1190
+#: src/xz/message.c:1199
msgid ""
" -q, --quiet suppress warnings; specify twice to suppress errors too\n"
" -v, --verbose be verbose; specify twice for even more verbose"
@@ -446,19 +672,25 @@ msgstr ""
" -v, --verbose podrobnější zprávy; zadáním dvakrát, budou ještě\n"
" podrobnější"
-#: src/xz/message.c:1195
+#: src/xz/message.c:1204
msgid " -Q, --no-warn make warnings not affect the exit status"
msgstr " -Q, --no-warn způsobí, že varování neovlivní stav ukončení"
-#: src/xz/message.c:1197
+#: src/xz/message.c:1206
msgid " --robot use machine-parsable messages (useful for scripts)"
-msgstr " --robot použít strojově analyzovatelné zprávy (užitečné pro skripty)"
+msgstr ""
+" --robot použít strojově analyzovatelné zprávy (užitečné pro\n"
+" skripty)"
-#: src/xz/message.c:1200
-msgid " --info-memory display the memory usage limit and exit"
-msgstr " --info-memory zobrazit omezení využití paměti a skončit"
+#: src/xz/message.c:1209
+msgid ""
+" --info-memory display the total amount of RAM and the currently active\n"
+" memory usage limits, and exit"
+msgstr ""
+" --info-memory zobrazit celkové množství paměti RAM a současné aktivní\n"
+" omezení použitelné paměti a skončit"
-#: src/xz/message.c:1202
+#: src/xz/message.c:1212
msgid ""
" -h, --help display the short help (lists only the basic options)\n"
" -H, --long-help display this long help and exit"
@@ -466,7 +698,7 @@ msgstr ""
" -h, --help zobrazit krátkou nápovědu (vypíše jen základní přepínače)\n"
" -H, --long-help zobrazit tuto úplnou nápovědu a skončit"
-#: src/xz/message.c:1206
+#: src/xz/message.c:1216
msgid ""
" -h, --help display this short help and exit\n"
" -H, --long-help display the long help (lists also the advanced options)"
@@ -474,11 +706,11 @@ msgstr ""
" -h, --help zobrazit tuto zkrácenou nápovědu a skončit\n"
" -H, --long-help zobrazit úplnou nápovědu (vypíše i pokročilé přepínače)"
-#: src/xz/message.c:1211
+#: src/xz/message.c:1221
msgid " -V, --version display the version number and exit"
msgstr " -V, --version zobrazit číslo verze a skončit"
-#: src/xz/message.c:1213
+#: src/xz/message.c:1223
msgid ""
"\n"
"With no FILE, or when FILE is -, read standard input.\n"
@@ -486,33 +718,16 @@ msgstr ""
"\n"
"Pokud SOUBOR není zadán nebo pokud je -, bude se číst ze standardního vstupu.\n"
-#: src/xz/message.c:1217
-#, c-format
-msgid ""
-"On this system and configuration, this program will use a maximum of roughly\n"
-"%s MiB RAM and "
-msgstr ""
-"Na tomto systému a s tímto nastavením použije tento program maximum ze zhruba\n"
-"%s MiB RAM a "
-
-#: src/xz/message.c:1219
-msgid ""
-"one thread.\n"
-"\n"
-msgstr ""
-"jedno vlákno.\n"
-"\n"
-
#. TRANSLATORS: This message indicates the bug reporting address
#. for this package. Please add _another line_ saying
#. "Report translation bugs to <...>\n" with the email or WWW
#. address for translation bugs. Thanks.
-#: src/xz/message.c:1228
+#: src/xz/message.c:1229
#, c-format
msgid "Report bugs to <%s> (in English or Finnish).\n"
msgstr "Chyby hlaste na <%s> (v angličtině nebo finštině).\n"
-#: src/xz/message.c:1230
+#: src/xz/message.c:1231
#, c-format
msgid "%s home page: <%s>\n"
msgstr "Domovská stránka %s: <%s>\n"
@@ -537,71 +752,94 @@ msgstr "%s: Neplatná hodnota volby"
msgid "Unsupported LZMA1/LZMA2 preset: %s"
msgstr "Nepodporované přednastavení LZMA1/LZMA2: %s"
-#: src/xz/options.c:365
-msgid "The sum of lc and lp must be at maximum of 4"
-msgstr "Součet lc a lp musí být maximálně 4"
+#: src/xz/options.c:355
+msgid "The sum of lc and lp must not exceed 4"
+msgstr "Součet lc a lp nesmí překročit hodnotu 4"
-#: src/xz/options.c:370
+#: src/xz/options.c:359
#, c-format
msgid "The selected match finder requires at least nice=%<PRIu32>"
msgstr "Vybraný vyhledávač shod vyžaduje minimálně nice=%<PRIu32>"
-#: src/xz/suffix.c:79 src/xz/suffix.c:164
+#: src/xz/suffix.c:101 src/xz/suffix.c:194
#, c-format
msgid "%s: With --format=raw, --suffix=.SUF is required unless writing to stdout"
-msgstr "%s: S --format=raw je vyžadováno --sufix=.SUF, vyjma zápisu do standardního výstupu"
+msgstr "%s: S přepínačem --format=raw je vyžadován --sufix=.PRIP, vyjma zápisu do standardního výstupu"
-#: src/xz/suffix.c:99
+#: src/xz/suffix.c:121
#, c-format
msgid "%s: Filename has an unknown suffix, skipping"
msgstr "%s: Název souboru má neznámou příponu, vynechává se"
-#: src/xz/suffix.c:154
+#: src/xz/suffix.c:175 src/xz/suffix.c:184
#, c-format
msgid "%s: File already has `%s' suffix, skipping"
msgstr "%s: Soubor již má příponu „%s“, vynechává se"
-#: src/xz/suffix.c:205
+#: src/xz/suffix.c:235
#, c-format
msgid "%s: Invalid filename suffix"
msgstr "%s: Neplatná přípona názvu souboru"
-#: src/xz/util.c:54
+#: src/xz/util.c:61
#, c-format
msgid "%s: Value is not a non-negative decimal integer"
msgstr "%s: Hodnota není nezáporné desítkové číslo"
-#: src/xz/util.c:90
-#, fuzzy, c-format
+#: src/xz/util.c:103
+#, c-format
msgid "%s: Invalid multiplier suffix"
-msgstr "%s: Neplatná přípona názvu souboru"
+msgstr "%s: Neplatná jednotka s předponou"
-#: src/xz/util.c:92
+#: src/xz/util.c:105
msgid "Valid suffixes are `KiB' (2^10), `MiB' (2^20), and `GiB' (2^30)."
-msgstr ""
+msgstr "Platné jednotky s předponami jsou „KiB“ (2^10 B), „MiB“ (2^20 B) a „GiB“ (2^30 B)."
-#: src/xz/util.c:109
+#: src/xz/util.c:122
#, c-format
msgid "Value of the option `%s' must be in the range [%<PRIu64>, %<PRIu64>]"
msgstr "Hodnota volby „%s“ musí být v rozsahu [%<PRIu64>, %<PRIu64>]"
-#: src/xz/util.c:283
+#: src/xz/util.c:247
msgid "Empty filename, skipping"
msgstr "Prázdný název souboru, vynechává se"
-#: src/xz/util.c:297
-#, fuzzy
+#: src/xz/util.c:261
msgid "Compressed data cannot be read from a terminal"
-msgstr "Komprimovaná data se nečtou z terminálu, vyjma použití volby „--force“."
+msgstr "Z terminálu nelze číst komprimovaná data"
-#: src/xz/util.c:310
-#, fuzzy
+#: src/xz/util.c:274
msgid "Compressed data cannot be written to a terminal"
-msgstr "Komprimovaná data se nezapisují do terminálu, vyjma použití volby „--force“."
+msgstr "Do terminálu nelze zapisovat komprimovaná data"
+
+#: src/common/tuklib_exit.c:39
+msgid "Writing to standard output failed"
+msgstr "Zápis do standardního výstupu selhal"
+
+#: src/common/tuklib_exit.c:42
+msgid "Unknown error"
+msgstr "Neznámá chyba"
#~ msgid "Limit was %s MiB, but %s MiB would have been needed"
#~ msgstr "Limit byl %s MiB, ale bylo by zapotřebí %s MiB"
+#~ msgid "%s MiB (%s bytes)\n"
+#~ msgstr "%s MiB (%s bajtů)\n"
+
+#~ msgid ""
+#~ " -e, --extreme use more CPU time when encoding to increase compression\n"
+#~ " ratio without increasing memory usage of the decoder"
+#~ msgstr ""
+#~ " -e, --extreme využít více procesorového času pro kódování, čímž se\n"
+#~ " zvýší kompresní poměr bez zvýšení paměti použité kodérem"
+
+#~ msgid ""
+#~ " -M, --memory=NUM use roughly NUM bytes of memory at maximum; 0 indicates\n"
+#~ " the default setting, which is 40 % of total RAM"
+#~ msgstr ""
+#~ " -M, --memory=POČ použít zhruba POČ bajtů paměti jako maximum; 0 znamená\n"
+#~ " výchozí nastavení, což je 40% celkového množství paměti"
+
#~ msgid ""
#~ "\n"
#~ " --subblock[=OPTS] Subblock filter; valid OPTS (valid values; default):\n"
@@ -615,5 +853,19 @@ msgstr "Komprimovaná data se nezapisují do terminálu, vyjma použití volby
#~ " (1 - 256 Mi; 4 Ki)\n"
#~ " rle=POČ velikost dávky pro kodér run-length (0-256; 0)"
+#~ msgid ""
+#~ "On this system and configuration, this program will use a maximum of roughly\n"
+#~ "%s MiB RAM and "
+#~ msgstr ""
+#~ "Na tomto systému a s tímto nastavením použije tento program maximum ze zhruba\n"
+#~ "%s MiB RAM a "
+
+#~ msgid ""
+#~ "one thread.\n"
+#~ "\n"
+#~ msgstr ""
+#~ "jedno vlákno.\n"
+#~ "\n"
+
#~ msgid "%s: Invalid multiplier suffix. Valid suffixes:"
#~ msgstr "%s: Neplatná přípona. Platné přípony jsou:"