diff options
8 files changed, 1774 insertions, 1 deletions
diff --git a/Master/texmf-dist/doc/latex/brandeis-dissertation/brandeis-dissertation.pdf b/Master/texmf-dist/doc/latex/brandeis-dissertation/brandeis-dissertation.pdf Binary files differnew file mode 100644 index 00000000000..38652fd1deb --- /dev/null +++ b/Master/texmf-dist/doc/latex/brandeis-dissertation/brandeis-dissertation.pdf diff --git a/Master/texmf-dist/doc/latex/brandeis-dissertation/brandeis-dissertation.tex b/Master/texmf-dist/doc/latex/brandeis-dissertation/brandeis-dissertation.tex new file mode 100644 index 00000000000..857c2c58be3 --- /dev/null +++ b/Master/texmf-dist/doc/latex/brandeis-dissertation/brandeis-dissertation.tex @@ -0,0 +1,65 @@ +%% +%% This is file `brandeis-dissertation.tex', +%% generated with the docstrip utility. +%% +%% The original source files were: +%% +%% brandeis-dissertation.dtx (with options: `driver') +%% +%% IMPORTANT NOTICE: +%% +%% For the copyright see the source file. +%% +%% Any modified versions of this file must be renamed +%% with new filenames distinct from brandeis-dissertation.tex. +%% +%% For distribution of the original source see the terms +%% for copying and modification in the file brandeis-dissertation.dtx. +%% +%% This generated file may be distributed as long as the +%% original source files, as listed above, are part of the +%% same distribution. (The sources need not necessarily be +%% in the same archive or directory.) +%% \RCS$Id: brandeis-dissertation.dtx,v 2.0 2004/10/27 00:47:04 turtle Exp $ +%% \RCS$Revision: 2.0 $ +%% \RCS$Date: 2013/10/17 00:47:04 $ +%% +%% (C) 2000 Andy Garland (aeg@cs.brandeis.edu) +%% (C) 2001 Pablo Funes (pablo@cs.brandeis.edu) +%% (C) 2004 Peter Møller Neergaard +%% (C) 2013 Meg Peck and John Burt +%% +%% This program may be distributed and/or modified under the +%% conditions of the LaTeX Project Public License, either version 1.2 +%% of this license or (at your option) any later version. +%% The latest version of this license is in +%% http://www.latex-project.org/lppl.txt +%% and version 1.2 or later is part of all distributions of LaTeX +%% version 1999/12/01 or later. +\documentclass{ltxdoc} +\usepackage{url} +\usepackage{alltt} + \OnlyDescription % Comment this line out for full documentation + % \EnableCrossrefs % Uncomment for full documentation + % \RecordChanges + \typeout{Expect some Under- and overfull boxes} +\makeatletter +\def\RCS$#1: #2 ${\@namedef{RCS#1}{#2}} +\let\bd@saved@cmd\cmd +\renewcommand{\cmd}{\bgroup\makeatletter\bd@cmd@i} +\newcommand{\bd@cmd@i}[1]{\bd@saved@cmd{#1}\egroup} +\newcommand{\mcmd}{\bgroup\makeatletter\mcmd@i} +\newcommand{\mcmd@i}[1]{\textbf{\hbox{\bd@saved@cmd#1}}\egroup} +\newcommand{\mcs}[1]{\textbf{\hbox{\cs{#1}}}} +\let\org@marg\marg +\renewcommand{\marg}[1]{\textbf{\org@marg{#1}}} +\newcommand{\ostar}{\texttt{*}} +\newcommand{\package}[1]{\textsf{#1}} +\makeatother +\begin{document} + \DocInput{brandeis-dissertation.dtx} +\end{document} + +\endinput +%% +%% End of file `brandeis-dissertation.tex'. diff --git a/Master/texmf-dist/source/latex/brandeis-dissertation/brandeis-dissertation.dtx b/Master/texmf-dist/source/latex/brandeis-dissertation/brandeis-dissertation.dtx new file mode 100644 index 00000000000..ce4f36d2aa2 --- /dev/null +++ b/Master/texmf-dist/source/latex/brandeis-dissertation/brandeis-dissertation.dtx @@ -0,0 +1,1266 @@ +%\iffalse -*- doctex -*- \fi +% +%% \RCS$Id: brandeis-dissertation.dtx,v 2.0 2004/10/27 00:47:04 turtle Exp $ +%% \RCS$Revision: 2.0 $ +%% \RCS$Date: 2013/10/17 00:47:04 $ +% +%\iffalse metacomment +% -*- latex-mode -*- +%% +%% (C) 2000 Andy Garland (aeg@cs.brandeis.edu) +%% (C) 2001 Pablo Funes (pablo@cs.brandeis.edu) +%% (C) 2004 Peter Møller Neergaard +%% (C) 2013 Meg Peck and John Burt +%% +%% This program may be distributed and/or modified under the +%% conditions of the LaTeX Project Public License, either version 1.2 +%% of this license or (at your option) any later version. +%% The latest version of this license is in +%% http://www.latex-project.org/lppl.txt +%% and version 1.2 or later is part of all distributions of LaTeX +%% version 1999/12/01 or later. +% +% This program consists of the file brandeis-dissertation.cls. +% +%\fi +% +% \CheckSum{667} +% \CharacterTable +% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z +% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z +% Digits \0\1\2\3\4\5\6\7\8\9 +% Exclamation \! Double quote \" Hash (number) \# +% Dollar \$ Percent \% Ampersand \& +% Acute accent \' Left paren \( Right paren \) +% Asterisk \* Plus \+ Comma \, +% Minus \- Point \. Solidus \/ +% Colon \: Semicolon \; Less than \< +% Equals \= Greater than \> Question mark \? +% Commercial at \@ Left bracket \[ Backslash \\ +% Right bracket \] Circumflex \^ Underscore \_ +% Grave accent \` Left brace \{ Vertical bar \| +% Right brace \} Tilde \~} +% +% \MakeShortVerb{\"} +% \DeleteShortVerb{\|} +% +% \title{The \package{brandeis-dissertation} class\thanks +% {This file has CVS revision \RCSRevision, dated \RCSDate. The +% class has been redesigned by the author based on previous +% work by Pablo Funes, Andy Garland, LFBrown 30Aug87, and RJLuoma. Some final fiddling by John Burt.}} +% \author{% +% Meghan Peck\thanks{\texttt{mcpeck@brandeis.}}} +% \maketitle +% +% \begin{abstract} +% This \LaTeXe-class file contains to design to typeset your +% dissertation according to the guidelines of GSAS of Brandeis University. +% \end{abstract} +% +% \newif\ifmulticols +% \IfFileExists{multicol.sty}{\multicolstrue}{} +% +% \ifmulticols +% \begin{multicols}{2} +% \fi +% {\parskip 0pt ^^A We have to reset \parskip +% ^^A (bug in \LaTeX) +% \tableofcontents +% } +% \ifmulticols +% \end{multicols} +% \fi +% +% You have done all the research. The ideas are in your +% head. All you are missing is that little thing called a +% dissertation, which you are gung-ho on writing using \LaTeX. This is +% where this class file enters: it allows you to use \LaTeX\ while +% adhering to the formatting guidelines of Brandeis University +% Graduate School of Arts and Sciences (GSAS). In +% particular, it allows you to get the front matter correct. +% +% The features are as follows: +% \begin{itemize} +% \item It provides correct margins for either single-paged +% output or double-paged output. +% \item It typesets the text with double-spaced line. However, footnotes, +% long quotations (the environment "quotation"), the bibliography, and +% the index is singe-spaced. +% \item It provides commands to produce the front matter. +% \end{itemize} +% +% To use the class, you should begin your document file with +% \begin{verbatim} +% \documentclass{brandeis-dissertation}\end{verbatim} +% instead of your usual document class declaration. The various +% options are described below in section~\ref{sec:class-options}. +% +% \section{Front Matter} +% +% The front matter is all the pages that comes before the main text of +% your dissertation, e.g., title page, dedication, abstract, table of +% contents. For the class to typeset the front matter, you should +% specify the formalities regarding your dissertation in the preamble +% of your document. You do this with the following commands. +% \begin{description} +% \item[\cmd{\title}\marg{title}:]\DescribeMacro{\title} +% The title of your dissertation. +% \item[\cmd{\author}\marg{name}:]\DescribeMacro{\author} +% Your full name. +% \item[\cmd{\department}\marg{department}:]\DescribeMacro{\department} +% Your department. +% \item[\cmd{\advisor}\meta{advisor}:]\DescribeMacro{\advisor} +% The full name of you advisor (chair of your +% committee) . +% \item[\cmd{\reader}\meta{reader}:]\DescribeMacro{\reader} Adds +% \meta{reader} to your committee. You should have one +% \cmd{\reader}-command for each reader on the committee. You should +% provide them in the order you want them to appear on the signature +% page. You should also include the school and department of every +% reader. +% \item[\cmd{\dean}\meta{name}:]\DescribeMacro{\dean} +% The full name of the dean who eventually +% signs off on the dissertation. +% \item[\cmd{\graduationyear}\meta{year}:]\DescribeMacro{\graduationyear} +% The year of your dissertation. +% \item[\cmd{\graduationmonth}\meta{month}:]\DescribeMacro{\graduationmonth} +% The month of your dissertation. +% \item[\cmd{\othercopyright}\meta{text} (optional):] Uses \meta{text} +% to acknowledge other people's copyright on your copyright page. +% This is only printed if you print a copyright page. +% \end{description} +% As an example, the following is an except from the preamble of my +% dissertation: +% \begin{verbatim} +% \title{Complexity Aspects of Programming Language Design} +% \author{Peter M{\o}ller Neergaard} +% \dean{Adam B. Jaffe} +% \advisor{Harry G. Mairson} +% \department{Michtom School of Computer Science} +% \reader{Peter Clote} +% \reader{Simone Martini} +% \reader{Timothy J. Hickey}\end{verbatim} +% +% \DescribeMacro{\thesisfront}The command +% \cmd{\thesisfront}\oarg{options} should be used at the very +% beginning of your document to produce all the front +% matter for you, e.g., +% \begin{verbatim} +% \begin{document} +% \thesisfront\end{verbatim} +% +% You need to specify the abstract and possible also the preface, +% dedication, and acknowledgments using the following commands: +% \begin{description} +% \item[\mcmd{\thesisabstract}\marg{text}:]\DescribeMacro{\thesisabstract} +% Uses \meta{text} as your abstract. +% \item[\mcmd{\dedication}\marg{dedication} (optional):]\DescribeMacro{\dedication} +% The dedication of your dissertation to \meta{dedication} appears +% on separate page. +% \item[\mcmd{\acknowledgments}\marg{text} +% (optional):]\DescribeMacro{\acknowledgments} +% \meta{text} is used as your acknowledgment. +% \item[\cmd{\preface}\marg{text} (optional):]\DescribeMacro{\preface} +% The preface of your dissertation. +% \end{description} +% As the abstract, preface and acknowledgments might by fairly long, +% it can be convenient to keep them in a separate file and include +% them using \cmd{\input}, e.g. +% \begin{verbatim} +% \thesisabstract{\input{abstract}}\end{verbatim} +% where the abstract in stored in the file "abstract.tex". +% +% \label{p:thesisfront-options} +% You can fine tune the behavior of \cmd{\thesisfront} with the following +% options. You provide them in an optional argument as a +% comma-separated list: +% \begin{description} +% \item[\texttt{onlinesubmission}:] The signature page is typeset for +% online submission (default). +% \item[\texttt{papersubmission}:] The signature page is typeset for +% paper submission. +% \item[\texttt{copyright}:] Print a copyright page (default). +% \item[\texttt{nocopyright}:] Do not print a copyright page. +% \item[\texttt{lot}:] Print a list of tables. +% \item[\texttt{nolot}:] Do not print a list of tables (default) +% \item[\texttt{lof}:] Print a list of figures. +% \item[\texttt{nolof}:] Do not print a list of figures (default). +% \end{description} +% For instance, the command to produce the front matter for a paper +% submission with a list of tables is: +% \begin{verbatim} +% \thesisfront[lot,papersubmission]\end{verbatim} +% +% \DescribeMacro{\signaturepage} +% When submitting online, you need to produce a signature page to be +% signed before your defense. You can do this using "\signaturepage*" +% in front of \cmd{\thesisfront} sometimes before you make the final +% version. +% +% \subsection{Your Own Front Matter Layout} +% +% Instead of using \cmd{\thesisfront} to produce the front matter, you +% can build the front matter yourself with the command below. +% \emph{However, this option is not recommended and you should ensure +% that you adhere to all the GSAS guidelines}. +% +% \begin{description} +% \item[\mcmd{\thesistitlepage}:]\DescribeMacro{\thesistitlepage} This +% command produces the front page of your dissertation. +% +% \item[\mcmd{\signaturetitlepage}\ostar:]\DescribeMacro{\signaturepage} +% This produces a signature page. The unstarred version is for +% online submission, while the starred version is for paper submission. +% +% \item[\mcmd{\copyrightpage}\marg{your name}\marg{year}:] +% \DescribeMacro{\copyrightpage} This produces the copyright page. +% +% \item[\mcmd{\dedicationpage}\marg{dedication}:] +% \DescribeMacro{\dedicationpage}This produces a page with the +% dedication. +% \end{description} +% +% \DescribeEnv{optionalpage} +% \DescribeEnv{optionalpage*} +% The environments "optionalpage" and "optionalpage*" produce other +% parts of the front matter, for instance the preface. The part will +% be typeset as if it was a chapter. They take the title of the part +% as a single argument. You can thus produce a preface as follows: +% \begin{alltt}\cs{begin}\{optionalpage\}\{Preface\}\par \(...\)\par\cs{end}\{optionalpage\}\end{alltt} +% By default an entry is added to the table of contents. This can be +% disabled by using the starred form. +% +% When printing double-sided, you might \cmd{\cleardoublepage} to +% get the pages positioned on a right hand side. +% +% \section{Margins and Line-spacing} +% +% \begin{table} +% \caption{The two options for margins} +% \begin{tabular}{l|r|r} +% & Minimum margins & Consistent 1.5in \\\hline +% Left margin & 1in & 1.5in \\ +% Right margin & 1in & 1.5in \\ +% Top margin & 1in & 1.5in \\ +% Bottom margin & 1in & 1.5in +% \end{tabular} +% \label{tbl:margins} +% \end{table} +% +% The GSAS guidelines call for the minimum margins given in +% Table~\ref{tbl:margins}. This is the default margins for the +% class. If you prefer, you can get a consistent 1.5in +% margins by using the class option "15margins" (see below). +% +% The class uses the package \package{geometry} to set the +% margins. This provides a very simple way to change the paper layout, +% e.g., to change the margins to 2 inches you just need to use: +% \begin{verbatim} +% \geometry{top=2in, bottom=2in, left=2in, right=2in }\end{verbatim} +% Note that the \cmd{\geometry} can only be used only in the document +% preamble. +% +% By default, the dissertation class uses page style "brandeisheadings". This page style will place +% the page number, centered, in +% the footer. If +% you change the page style (to "headings" or "myheadings") in the preamble, the dissertation class +% will adjust the margins accordingly. However, if you use a +% non-standard heading (for instance from \package{fancyhdr}) you will +% need to adjust the margins accordingly. +% +% \DescribeEnv{singlespacing}You can use the environment +% "singlespacing" to single-space a block of text. +% +% \section{Class Options} +% \label{sec:class-options} +% +% The class takes the following options provided as optional arguments +% to the \cmd{\documentclass} command: +% \begin{description} +% \item[\texttt{minmargins}:] Use the minimum margins called for by +% GSAS (default). +% \item[\texttt{15margins}:] Use a consistent 1.5in margin. +% \item[\texttt{oneside}:] Single-sided output (from \package{book} +% class, default). +% \item[\texttt{twoside}:] Double-sided output. This gives different +% headers on left and right pages. Some pages might be left blank to have +% chapters start on right pages (from the \package{book} class). +% +% You are prone to get some overfull +% \cmd{\vbox} warnings when using this option.\footnote{With +% double-sided printing, \LaTeX\ attempts to fill every page to +% the bottom to avoid ragged bottoms. Its main remedy for this is +% to stretch the spacing between paragraphs. When this does not +% provide enough extra space, you get an underfull \cmd{\vbox}.} +% They can be avoided by using \cmd{\raggedbottom}, but the result +% can be very aesthetically unpleasant as you get facing pages with +% different text height. Therefore, you are recommended to ignore +% the overfull boxes if you cannot rearrange the paragraphs to avoid +% them. +% +% \item[\texttt{draft}:] Draft version---this marks overfull boxes and might +% also effect other packages (from the \package{book} class). +% \item[\texttt{final}:] Final version (from the \package{book} class, default). +% \item[\texttt{openright}:] For double-sided printing: chapters +% always open on the right page (from the \package{book} class, default). +% \item[\texttt{openany}:] For double-sided printing: chapters can +% open on either a left or a right page (from the \package{book} class). +% \item[\texttt{blankcleared}:] For double-sided printing: when a page +% is cleared to make a chapter start on a right page, leave out page +% number and headers. +% \item[\texttt{numbercleared}:]For double-sided printing: when a page +% is cleared to make a chapter start on a right page, put page +% number and headings on the cleared page. +% \item[\texttt{leqno}:] Equation number are placed to the left (from +% \package{book} class). +% \item[\texttt{fleqno}:] Equation number are placed flushed to the +% left (from the \package{book} class). +% \item[\texttt{openbib}:] A more open layout of the bibliography (from the \package{book} class). +% \item[\texttt{12pt}:] The main text is set in 12pt font size (from the \package{book} class, default) +% \item[\texttt{11pt}:] The main text is set in 11pt font size; +% \cmd{\small} and \cmd{\footnotesize} do not change the font size +% (essentially from the \package{book} class, \emph{not recommended by +% GSAS).} +% \item[\texttt{10pt}:] The main text is set in 11pt font size; +% \cmd{\small} and \cmd{\footnotesize} do not change the font size +% (essentially from the \package{book} class, \emph{not recommended by +% GSAS).} +% \end{description} +% +% \section{Issues To Be Aware Of} +% +% The following is a list of issues you should be aware. It might be +% a little {\TeX}nichal so skip it, if it does not apply to your +% dissertation. +% +% \subsection{Margin Notes} +% +% While the class allows margin notes set with the \LaTeX\ command +% \cmd{\marginpar}, the margins are not designed for margin +% notes. +% +% If you use margin notes they will comes as close as .35in from the +% border of the paper. If you use them extensively, this is unlikely to +% be kosher and you should adjust the margin parameters. You can +% solve this by including the following in your preamble. +% \begin{alltt}\cs{geometry}\{marginparwidth=\(w\), marginparsep=\(s\), includemp\}\end{alltt} +% where~$w$ is the width of your margin notes and $s$ their separation +% from the text +% +% You should check with the GSAS for more guidance. +% +% \StopEventually{} +% +% \section{Driver Producing Documentation} +% +% We want to distribution the documented class file as a single +% file even though the file is used for two very different purposes: +% \begin{enumerate} +% \item \label{it:documentation}To produce the documentation of the class. +% \item \label{it:class}To provide the class for users. +% \end{enumerate} +% We accomplish this with a bit of code taken from the +% \package{doc} package: We test whether a \cmd{\documentclass}-command has +% already been processed (we exploit that \LaTeX\ binds +% \cmd{\documentclass} to \cmd{\@twoclasseserror} when it start to +% process \cmd{\documentclass}). If so, we know that we are in +% Case~\ref{it:class}, otherwise we use the driver to produce the +% documentation. +% +% This is implemented with the following trickery. If the condition +% below is false, i.e., \cmd{\documentclass} is not bound ot +% \cmd{\@twoclasseserror}, then a \cs{fi} is constructed on the fly +% and \LaTeX\ continues processing the code following "\csname fi\endcsname". On the other hand, if the condition is true, \LaTeX\ +% searches for a \cs{fi}, but has no clue that "\csname fi\endcsname" +% stands for \cs{fi}. Therefore, it skips until it finds the +% \cs{fi} following "\end{document}". +% +% Additionally, these parts are enclosed in a guard "gobble" to +% prevent the trickery to end up in files coming out of +% \package{docstrip}. +% \begin{macrocode} +%<*driver> +%<*gobble> +\makeatletter +\ifx\documentclass\@twoclasseserror +\else \makeatother\csname fi\endcsname +%</gobble> +% \end{macrocode} +% Otherwise we process the following lines which will produced the +% formatted the documentation. +% +% \begin{macrocode} +\documentclass{ltxdoc} +\usepackage{url} +\usepackage{alltt} +% \end{macrocode} +% By default we only want the user documentation: +% \begin{macrocode} + \OnlyDescription % Comment this line out for full documentation +% \end{macrocode} +% For the full documentation, the following lines should be uncommented: +% \begin{macrocode} + % \EnableCrossrefs % Uncomment for full documentation + % \RecordChanges +% \end{macrocode} +% which produces a cross-referenced index of the macros' definitions +% and usage and a history of changes. +% +% We tell the user not to worry about underfull/overfull boxes. +% \begin{macrocode} + \typeout{Expect some Under- and overfull boxes} +% \end{macrocode} +% Finally, we define some commands to typeset the documentation: First, a +% command to typeset the RCS tags generated by the version control. +% \begin{macro}{\RCS} +% \mcmd{\RCS}"$"\meta{ID}": "\meta{description}" $" defines +% \cs{RCS\meta{ID}} to expand to \meta{description}. +% \begin{macrocode} +\makeatletter +\def\RCS$#1: #2 ${\@namedef{RCS#1}{#2}} +% \end{macrocode} +% \end{macro}^^A \RCS +% +% \begin{macro}{\cmd} +% \begin{macro}{\mcmd} +% \begin{macro}{\mcs} +% \begin{macro}{\marg} +% \begin{macro}{\ostar} +% \begin{macro}{\package} +% Second, some commands for formatting the various parts of the +% documentation: We fix the \cmd{\cmd} so it includes "@" in the +% command names (necessary when we define commands \cs{if@$\ldots$}), +% \cmd{\mcmd}\marg{\cs{command}} for the mandatory command name set as +% with \cmd{\cmd}, \cmd{\mcs}\marg{name} for the mandatory command +% name set as with \cmd{\cs}, \cmd{\marg}\marg{argument} for a +% mandatory argument, \cmd{\ostar} for an optional start, and +% \cmd{\package}\marg{package name} for a package name. +% \begin{macrocode} +\let\bd@saved@cmd\cmd +\renewcommand{\cmd}{\bgroup\makeatletter\bd@cmd@i} +\newcommand{\bd@cmd@i}[1]{\bd@saved@cmd{#1}\egroup} +\newcommand{\mcmd}{\bgroup\makeatletter\mcmd@i} +\newcommand{\mcmd@i}[1]{\textbf{\hbox{\bd@saved@cmd#1}}\egroup} +\newcommand{\mcs}[1]{\textbf{\hbox{\cs{#1}}}} +\let\org@marg\marg +\renewcommand{\marg}[1]{\textbf{\org@marg{#1}}} +\newcommand{\ostar}{\texttt{*}} +\newcommand{\package}[1]{\textsf{#1}} +\makeatother +% \end{macrocode} +% \end{macro}^^A \package +% \end{macro}^^A \ostar +% \end{macro}^^A \marg +% \end{macro}^^A \mcs +% \end{macro}^^A \mcmd +% \end{macro}^^A \cmd +% +% \begin{macrocode} +\begin{document} + \DocInput{brandeis-dissertation.dtx} +\end{document} +%<*gobble> +\fi +%</gobble> +%</driver> +% \end{macrocode} +% +% \section{Class Code} +% +% \begin{macrocode} +%<*class> +\NeedsTeXFormat{LaTeX2e} +\ProvidesClass{brandeis-dissertation}% + [2004/10/21 v1.0 Brandeis dissertation settings] +% \end{macrocode} +% We declare the various options along with flags for them. +% \begin{macrocode} +\newif\ifbd@blankclear +\DeclareOption{blankcleared}{\bd@blankcleartrue} +\DeclareOption{numbercleared}{\bd@blankclearfalse} +\newif\ifbd@minmar +\DeclareOption{minmargins}{\bd@minmartrue} +\DeclareOption{15margins}{\bd@minmarfalse} +% \end{macrocode} +% \changes{v1.0}{2004/10/25}{Dropped the margin changing options for \package{geometry}} +% +% \begin{macro}{\bd@book@size} +% \begin{macro}{\bd@book@side} +% \begin{macro}{\bd@book@final} +% Finally, we shadow a few of the options given by +% \package{book}. Since \package{book} uses the unstarred +% "\ProcessOptions", we cannot pass mutually exclusive options like +% "twoside" and "oneside" to \package{book} as the one declared latest +% in \package{book} will always take precedence. We therefore store +% the choice in flags. +% +% GSAS recommend a 12pt font size, but allow font sizes down to 10pt. We +% therefore include the smaller font sizes, but change them so +% \cmd{\small} and \cmd{\footnotesize} do not reduce the font size. +% \begin{macrocode} +\newif\ifbd@nochange@small@ftnt +\DeclareOption{12pt}{\def\bd@book@size{12pt}% + \bd@nochange@small@ftntfalse} +\DeclareOption{11pt}{\def\bd@book@size{11pt}% + \bd@nochange@small@ftnttrue} +\DeclareOption{10pt}{\def\bd@book@size{10}% + \bd@nochange@small@ftnttrue} +\DeclareOption{oneside}{\def\bd@book@side{oneside}} +\DeclareOption{twoside}{\def\bd@book@side{twoside}} +\DeclareOption{draft}{\def\bd@book@final{draft}} +\DeclareOption{final}{\def\bd@book@final{final}} +\DeclareOption{openright}{\def\bd@book@openrght{openright}} +\DeclareOption{openany}{\def\bd@book@openrght{openany}} +% \end{macrocode} +% The "leqno", "fleqno", and the "openbib" does not have any +% excluding option. +% \begin{macrocode} +\DeclareOption{leqno}{\PassOptionsToClass{book}{\currentoption}} +\DeclareOption{fleqno}{\PassOptionsToClass{book}{\currentoption}} +\DeclareOption{openbib}{\PassOptionsToClass{book}{\currentoption}} +\DeclareOption{openbib}{\def\bd@book@openbib{openbib}} +% \end{macrocode} +% \end{macro}^^A \bd@book@final +% \end{macro}^^A \bd@book@side +% \end{macro}^^A \bd@book@size +% +% We process the options and we can then load the book class with the +% the default options of 12pt font and letter paper. +% \begin{macrocode} +\ExecuteOptions{12pt,openright,final,oneside,% + minmargins,copyright,nolot,lof} +\ProcessOptions* +\LoadClass[letterpaper,\bd@book@size,\bd@book@side,% + \bd@book@final,\bd@book@openrght]{book} +% \end{macrocode} +% +% After loading the \package{book} class, fonts have been set up. If +% needed for font sizes 10pt and 11pt, we now make \cmd{\small} and +% \cmd{\footnotesize} the same as the normal font size. +% \begin{macrocode} +\ifbd@nochange@small@ftnt + \let\small\normalsize + \let\footnotesize\normalsize +\fi +% \end{macrocode} +% +% \begin{macro}{\bd@cleardoublepageblank} +% \begin{macro}{\bd@cleardoublepage@save} +% The \cmd{\clearblank} is an alternative to +% \cmd{\cleardoublepage} that leaves the facing left-hand page (if +% any) completely blank, i.e., without a page number. We do so +% by temporarily changing the pagestyle to "empty". +% \begin{macrocode} +\let\bd@cleardoublepage@save\cleardoublepage +\newcommand{\bd@cleardoublepageblank}{% + \clearpage + \thispagestyle{empty}% + \bd@cleardoublepage@save} +\ifbd@blankclear + \AtBeginDocument{\let\cleardoublepage\bd@cleardoublepageblank} +\fi +% \end{macrocode} +% \end{macro}^^A \bd@cleardoublepage@save +% \end{macro}^^A \bd@cleardoublepageblank +% +% \subsection{Spacing} +% +% From the Brandeis web page: ``Double-space all textual material and +% all preliminary pages.''. Switching between single and double +% spacing can be painful, but the package \package{setspace} takes +% out most of the sting. +% \begin{macrocode} +\RequirePackage[doublespacing]{setspace} +% \end{macrocode} +% +% From the Brandeis web page: ``Notes, bibliographic references, and +% long quotations may be single-spaced.''. +% +% \begin{environment}{thebibliography} +% \begin{environment}{theindex} +% \begin{environment}{quotation} +% \begin{macro}{\bd@thebibliography} +% \begin{macro}{\bd@endthebibliography} +% \begin{macro}{\bd@theindex} +% \begin{macro}{\bd@endtheindex} +% \begin{macro}{\bd@quotation} +% \begin{macro}{\bd@endquotation} +% \package{setspace} is smart enough to single-space footnotes for +% you. We adapt +% the bibliography, index, and "quotation" environment\footnote{From the +% \LaTeX-book: ``The "quotation" environment is used for quotations +% of more than one paragraph''} to produce single-spaced output: +% \begin{macrocode} +\let\bd@thebibliography\thebibliography +\let\bd@endthebibliography\endthebibliography +\renewenvironment{thebibliography}% + {\begin{singlespace}\bd@thebibliography}% + {\bd@endthebibliography\end{singlespace}} +\let\bd@theindex\theindex +\let\bd@endtheindex\endtheindex +\renewenvironment{theindex}{% + \addcontentsline{toc}{chapter}% + {\protect\numberline{}\indexname}% + \bd@theindex\begin{singlespace}\small}% + {\end{singlespace}\bd@endtheindex} +\let\bd@quotation\quotation +\let\bd@endquotation\endquotation +\renewenvironment{quotation}% + {\begin{singlespace}\bd@quotation}% + {\bd@endquotation\end{singlespace}} +% \end{macrocode} +% \end{macro}^^A \bd@endquotation +% \end{macro}^^A \bd@quotation +% \end{macro}^^A \bd@endtheindex +% \end{macro}^^A \bd@theindex +% \end{macro}^^A \bd@endthebibliography +% \end{macro}^^A \bd@thebibliography +% \end{environment}^^A quotation +% \end{environment}^^A theindex +% \end{environment}^^A thebibliography +% +% Finally, we also decrease the line spacing smaller in math displays +% as displays otherwise look odd. +% \begin{macrocode} +\everydisplay\expandafter{% + \the\everydisplay + \def\baselinestretch{1.2}\selectfont} +% \end{macrocode} +% Finally, we adjust to skip amounts to reflect the increased line spacing. +% \begin{macrocode} +\smallskipamount=2pt plus 1.5pt minus 1.5pt +\smallskipamount=4pt plus 3pt minus 3pt +\bigskipamount=8pt plus 6pt minus 6pt +% \end{macrocode} +% \section{Margins} +% +% We simplify matters by using the \package{geometry}. The GSAS +% guidelines calls for letter paper ($8 \times 11.5$ inch) and the +% margins given in the table on p.~\pageref{tbl:margins}. +% Furthermore, the guidelines call for the top margin of the first +% page of each chapter to be at least 2in. The latter is more than +% provided for by the \package{book} class which hard codes a 50pt +% vertical space on top of the chapter heading. +% \begin{macrocode} +\RequirePackage[letterpaper]{geometry} +\ifbd@minmar + \geometry{left=1in, top=1in, right=1in, bottom=1in, + marginparwidth=.5in} +\else + \geometry{margin=1.5in,marginparwidth=1in} +\fi +% \end{macrocode} +% define the brandeisheadings page style +% \begin{macro}{\ps@brandeisheadings} +% \begin{macrocode} +\if@twoside + \def\ps@brandeisheadings{% + \def\@evenfoot{\hfil\thepage\hfil}% + \def\@oddfoot{\hfil\thepage\hfil}% + \def\@evenhead{\relax}% + \def\@oddhead{\relax}% + % \def\@evenhead{\hfil{\slhape\leftmark}\hfil}% + % \def\@oddhead{\hfil{\slshape\rightmark}\hfil}% + \let\@mkboth\markboth + \def\chaptermark##1{% + \markboth {\MakeUppercase{% + \ifnum \c@secnumdepth >\m@ne + \if@mainmatter + \@chapapp\ \thechapter. \ % + \fi + \fi + ##1}}{}}% + \def\sectionmark##1{% + \markright {\MakeUppercase{% + \ifnum \c@secnumdepth >\z@ + \thesection. \ % + \fi + ##1}}}} +\else + \def\ps@brandeisheadings{% + + \def\@oddfoot{\hfil\thepage\hfil}% + \def\@oddhead{\hfil{\slshape\rightmark}\hfil}% + \let\@mkboth\markboth + \def\chaptermark##1{% + \markright {\MakeUppercase{% + \ifnum \c@secnumdepth >\m@ne + \if@mainmatter + \@chapapp\ \thechapter. \ % + \fi + \fi + ##1}}}} +\fi +% \end{macro}{\ps@brandeisheadings} +% \end{macrocode} +% \begin{macro}{\bd@ps@plain@saved} +% \begin{macro}{\bd@ps@empty@saved} +% \begin{macro}{\bd@ps@headings@saved} +% \begin{macro}{\bd@ps@myheadings@saved} +% \begin{macro}{\bd@ps@brandeisheadings@saved} +% To get the margin calculations right, we let the page style commands +% change the constraints while we are in the preamble: +% \begin{macrocode} +\let\bd@ps@plain@saved\ps@plain +\let\bd@ps@empty@saved\ps@empty +\let\bd@ps@headings@saved\ps@headings +\let\bd@ps@myheadings@saved\ps@myheadings +\let\bd@ps@brandeisheadings@saved\ps@brandeisheadings +\def\ps@plain{\geometry{includehead=false,includefoot}% + \bd@ps@plain@saved} +\def\ps@pempty{\geometry{includehead=false,includefoot=false}% + \bd@ps@empty@saved} +\def\ps@headings{\geometry{includehead,includefoot=false}% + \bd@ps@headings@saved} +\def\ps@myheadings{\geometry{includehead,includefoot=false}% + \bd@ps@myheadings@saved} +\def\ps@brandeisheadings{\geometry{includehead,includefoot}% + \bd@ps@brandeisheadings@saved} +\AtBeginDocument{% + \let\ps@plain\bd@ps@plain@saved + \let\ps@empty\bd@ps@empty@saved + \let\ps@headings\bd@ps@headings@saved + \let\ps@myheadings\bd@ps@myheadings@saved + \let\ps@brandeisheadings\bd@ps@brandeisheadings@saved + \let\bd@ps@plain\@undefined + \let\bd@ps@empty\@undefined + \let\bd@ps@headings\@undefined + \let\bd@ps@myheadings\@undefined + \let\bd@ps@brandeisheadings\@undefined} +% \end{macrocode} +% \end{macro}^^A \bd@ps@brandeisheadings@saved +% \end{macro}^^A \bd@ps@myheadings@saved +% \end{macro}^^A \bd@ps@headings@saved +% \end{macro}^^A \bd@ps@empty@saved +% \end{macro}^^A \bd@ps@plain@saved +% +% We choose the default page style to be brandeisheadings: +% \begin{macrocode} +\pagestyle{brandeisheadings} +% \end{macrocode} +% +% \section{Front Matter} +% +% \begin{macro}{\thesisfront} +% \cmd{\thesisfront}\oarg{options} produces the front page based on +% the parameters set in the preamble. \meta{options} is a +% comma-separated list of options as described on +% p.~\pageref{p:thesisfront-options}. +% +% We first process the options. Each valid option is defined below +% as a macro \cs{bd@tf@\meta{option}} that is to be executed for the +% option. +% \begin{macrocode} +\newcommand{\thesisfront}[1][]{% + \@for\bd@option:=#1\do{% + \@ifundefined{bd@tf@\bd@option}{% + \@latex@error{\@backslashchar thesisfront: option `\bd@option' + unknown}% + {The option you have specified is unknown. Check the spelling +and \MessageBreak consult the documentation for the\MessageBreak +brandeis-dissertation class.}}% + {\@nameuse{bd@tf@\bd@option}}}% +% \end{macrocode} +% We mark that this is the front matter. +% \begin{macrocode} + \frontmatter +% \end{macrocode} +% The pages from the title page and until the acknowledgments should +% be counted, but not numbered. We start a group so we can +% change the page style without worries. +% \begin{macrocode} + \bgroup + \pagestyle{empty} + \thesistitlepage\cleardoublepage +% \end{macrocode} +% When submitting online, the signature page only mentions the +% committee's names, otherwise we need signature lines. +% \begin{macrocode} + \if@bd@onlinesubmission{\signaturepage}{\signaturepage*}% + \cleardoublepage + \if@bd@crpage{\copyrightpage{\@author}{\@graduationyear}% + \cleardoublepage}% + \ifx\@dedication\@empty\else + \dedicationpage{\@dedication}% + \cleardoublepage + \fi + \cleardoublepage + \egroup + \bd@optpage*{Acknowledgments}{\@acknowledgments}% + \cleardoublepage + \bd@abstract{\@thesisabstract}% + \cleardoublepage + \bd@optpage{Preface}{\@preface}% + \cleardoublepage + \tableofcontents + \cleardoublepage + \if@bd@lot{\listoftables\cleardoublepage}% + \if@bd@lof{\listoffigures\cleardoublepage}% + \mainmatter} +% \end{macrocode} +% \end{macro}^^A \thesisfront +% +% We then define the various options: +% \begin{macro}{\if@bd@onlinesubmission} +% \begin{macro}{\bd@tf@onlinesubmission} +% \begin{macro}{\bd@tf@papersubmission} +% \cmd{\if@bd@onlinesubmission} is the flag for whether we prepare +% for online or paper submission. The corresponding options are +% "onlinesubmission" and "papersubmission" +% \begin{macrocode} +\let\if@bd@onlinesubmission\@firstoftwo +\newcommand{\bd@tf@onlinesubmission}{% + \let\if@bd@onlinesubmission\@firstoftwo} +\newcommand{\bd@tf@papersubmission}{% + \let\if@bd@onlinesubmission\@secondoftwo} +% \end{macrocode} +% \end{macro}^^A \bd@tf@papersubmission +% \end{macro}^^A \bd@tf@onlinesubmission +% \end{macro}^^A \if@bd@onlinesubmission +% +% \begin{macro}{\if@bd@crpage} +% \begin{macro}{\bd@tf@copyrightpage} +% \begin{macro}{\bd@tf@nocopyrightpage} +% \cmd{\if@bd@crpage} is the flag for whether we include a copyright +% page. The corresponding options are +% "copyrightpage" and "nocopyrightpage". +% \begin{macrocode} +\let\if@bd@crpage\@iden +\newcommand{\bd@tf@copyrightpage}{\let\if@bd@crpage\@iden} +\newcommand{\bd@tf@nocopyrightpage}{\let\if@bd@crpage\@gobble} +% \end{macrocode} +% \end{macro}^^A \bd@tf@nocopyrightpage +% \end{macro}^^A \bd@tf@copyrightpage +% \end{macro}^^A \if@bd@crpage +% +% \begin{macro}{\if@bd@lot} +% \begin{macro}{\bd@tf@lot} +% \begin{macro}{\bd@tf@nolot} +% \cmd{\if@bd@lot} is the flag for whether we include a list of +% tables. The corresponding options are +% "lot" and "nolot". +% \begin{macrocode} +\let\if@bd@lot\@gobble +\newcommand{\bd@tf@lot}{\let\if@bd@lot\@iden} +\newcommand{\bd@tf@nolot}{\let\if@bd@lot\@gobble} +% \end{macrocode} +% \end{macro}^^A \bd@tf@nolot +% \end{macro}^^A \bd@tf@lot +% \end{macro}^^A \if@bd@lot +% +% \begin{macro}{\if@bd@lof} +% \begin{macro}{\bd@tf@lof} +% \begin{macro}{\bd@tf@nolof} +% \cmd{\if@bd@lof} is the flag for whether we include a list of +% figures. The corresponding options are +% "lof" and "nolof". +% \begin{macrocode} +\let\if@bd@lof\@gobble +\newcommand{\bd@tf@lof}{\let\if@bd@lof\@iden} +\newcommand{\bd@tf@nolof}{\let\if@bd@lof\@gobble} +% \end{macrocode} +% \end{macro}^^A \bd@tf@nolof +% \end{macro}^^A \bd@tf@lof +% \end{macro}^^A \if@bd@lof +% +% \begin{macro}{\tableofcontents} +% \begin{macro}{\listoftables} +% \begin{macro}{\listoffigures} +% We adopt \cmd{\tableofcontents}, \cmd{\listoftables}, and +% \cmd{\listoffigures} to typeset the table of contents, list of tables, +% and list of figures single-spaced. We only include chapters sand +% sections in the table of contents as in the example in the +% dissertation examples. +% \begin{macrocode} +\setcounter{tocdepth}{1} +\let\bd@org@tableofcontents\tableofcontents +\renewcommand{\tableofcontents}{% + \begin{singlespace} + \bd@org@tableofcontents + \end{singlespace}} +\let\bd@org@listoftables\listoftables +\renewcommand{\listoftables}{% + \begin{singlespace} + \bd@org@listoftables + \end{singlespace}} +\let\bd@org@listoffigures\listoffigures +\renewcommand{\listoffigures}{% + \begin{singlespace} + \bd@org@listoffigures + \end{singlespace}} +% \end{macrocode} +% \end{macro}^^A \listoffigures +% \end{macro}^^A \listoftables +% \changes{07/01/2004}{1.0}{PMN: added Table of Contents to Table of Contents.} +% \end{macro}^^A \tableofcontents +% +% \begin{macro}{\mainmatter} +% The dissertation guidelines does not call for a blank page between +% front matter and main matter. We therefore adopt the +% \textsf{book}'s definition accordingly. +% \begin{macrocode} +\renewcommand\mainmatter{% + \clearpage + \@mainmattertrue + \pagenumbering{arabic}} +% \end{macrocode} +% \end{macro}^^A \mainmatter +% +% \begin{macro}{\acknowledgments} +% \begin{macro}{\@acknowledgments} +% \begin{macro}{\advisor} +% \begin{macro}{\@advisor} +% \begin{macro}{\dean} +% \begin{macro}{\@dean} +% \begin{macro}{\dedication} +% \begin{macro}{\@dedication} +% \begin{macro}{\department} +% \begin{macro}{\@department} +% \begin{macro}{\graduationmonth} +% \begin{macro}{\@graduationmonth} +% \begin{macro}{\graduationyear} +% \begin{macro}{\@graduationyear} +% \begin{macro}{\othercopyright} +% \begin{macro}{\@othercopyright} +% \begin{macro}{\preface} +% \begin{macro}{\@preface} +% \begin{macro}{\thesisabstract} +% \begin{macro}{\@thesisabstract} +% We define the commands for the formal parameters of the +% dissertation. For each \meta{parameter}, the command +% \cs{\meta{parameter}} records \meta{parameter} by storing it in +% \cs{@\meta{parameter}}. +% \begin{macrocode} +\gdef\@acknowledgments{} +\gdef\@advisor{} +\gdef\@dean{} +\gdef\@dedication{} +\gdef\@department{} +\gdef\@graduationmonth{May} +\xdef\@graduationyear{\the\year} +\gdef\@othercopyright{} +\gdef\@preface{} +\gdef\@thesisabstract{} +\newcommand{\acknowledgments}[1]{\gdef\@acknowledgments{#1}} +\newcommand{\advisor}[1]{\gdef\@advisor{#1}} +\newcommand{\dean}[1]{\gdef\@dean{#1}} +\newcommand{\dedication}[1]{\gdef\@dedication{#1}} +\newcommand{\department}[1]{\gdef\@department{#1}} +\newcommand{\graduationmonth}[1]{\gdef\@graduationmonth{#1}} +\newcommand{\graduationyear}[1]{\gdef\@graduationyear{#1}} +\newcommand{\othercopyright}[1]{\gdef\@othercopyright{#1}} +\newcommand{\preface}[1]{\gdef\@preface{#1}} +\newcommand{\thesisabstract}[1]{\gdef\@thesisabstract{#1}} +% \end{macrocode} +% \end{macro}^^A \@thesisabstract +% \end{macro}^^A \thesisabstract +% \end{macro}^^A \@preface +% \end{macro}^^A \preface +% \end{macro}^^A \@othercopyright +% \end{macro}^^A \othercopyright +% \end{macro}^^A \@graduationyear +% \end{macro}^^A \graduationyear +% \end{macro}^^A \@graduationmonth +% \end{macro}^^A \graduationmonth +% \end{macro}^^A \@department +% \end{macro}^^A \department +% \end{macro}^^A \@dedication +% \end{macro}^^A \dedication +% \end{macro}^^A \@dean +% \end{macro}^^A \dean +% \end{macro}^^A \@advisor +% \end{macro}^^A \advisor +% \end{macro}^^A \@acknowledgments +% \end{macro}^^A \acknowledgments +% +% \begin{macro}{\reader} +% \begin{macro}{\@committee} +% The \mcmd{\reader}\marg{reader} adds \meta{reader} as a reader to +% the committee. This is done by collection the readers in +% \cmd{\@committee} enclosed by \cmd{\do}. +% \begin{macrocode} +\newcommand{\reader}[1]{% + \expandafter\gdef + \expandafter\@committee + \expandafter{\@committee\do{#1}}} +\gdef\@committee{} +% \end{macrocode} +% \end{macro}^^A \@committee +% \end{macro}^^A \reader +% +% \section{Title Page} +% +% \begin{macro}{\thesistitlepage} +% \mcmd{\thesistitlepage} typesets the title page of the +% dissertation on a page without page number. +% \begin{macrocode} +\newcommand{\thesistitlepage}{ + \thispagestyle{empty}% + \begin{center} + \vspace*{.25in}% + {\Huge \bf\baselineskip=.8\baselineskip \@title\\} + \vspace*{.5in}% + A Dissertation\\ + \vspace*{.25in}% + Presented to\\ + The Faculty of the Graduate School of Arts and Sciences\\ + Brandeis University\\ + \@department\\ + \@advisor, Advisor\\ + \vspace*{.5in} + In Partial Fulfillment\\ + of the Requirements for the Degree\\ + Doctor of Philosophy\\ + \vspace*{.5in} + by\\ + \@author\\ + \@graduationmonth, \@graduationyear\\ + \end{center}% + \clearpage} +% \end{macrocode} +% \end{macro}^^A \thesistitlepage +% +% \section{Copyright Page} +% +% \begin{macro}{\copyrightpage} +% \mcmd{\copyrightpage}\marg{name}\marg{year} produces the thesis +% copyright page on a page with the page number omitted. +% \begin{macrocode} +\newcommand{\copyrightpage}[2]{% + \thispagestyle{empty}% + \begin{center} + \vspace*{2.5in} + \copyright Copyright by \\ + \vspace*{.05in} + #1 \\ + \vspace*{.05in} + #2 + \end{center} + \vspace{0pt}\vfill% + \begin{singlespace} + \begin{raggedright} + \small + \@othercopyright + \end{raggedright} + \end{singlespace} + \clearpage} +% \end{macrocode} +% \changes{07/01/2004}{v0.1}{Added \cmd{\othercopyright}.} +% \end{macro}^^A \copyrightpage +% +% \begin{macro}{\dedicationpage} +% \mcmd{\dedicationpage}\marg{dedication} produces a dedication page +% on a page with the page number omitted. +% \begin{macrocode} +\newcommand{\dedicationpage}[1]{% + \thispagestyle{empty}% + \vspace*{2.5in}% + \begin{center}% + #1 + \end{center}% + \clearpage} +% \end{macrocode} +% \end{macro}^^A \dedicationpage +% +% \section{Abstract} +% +% \begin{environment}{abstract} +% "abstract" is the environment for typesetting the abstract of the +% dissertation. +% \begin{macrocode} +\newenvironment{abstract}{% + \addcontentsline{toc}{chapter}{Abstract} + \begin{singlespace} + \thispagestyle{plain} + \begin{center} + {\Huge\bf Abstract\\}% + \vspace*{.2in}% + {\large\bf \@title \\}% + \vspace*{.1in}% + \noindent + A dissertation presented to the Faculty of \\ + the Graduate School of Arts and Sciences of \\ + Brandeis University, Waltham, Massachusetts \\ + \vspace*{0.1in} + by \@author + \end{center} + \end{singlespace}% + \begin{doublespace} + \noindent}% + {\end{doublespace}% + \clearpage} +% \end{macrocode} +% \end{environment} +% +% \begin{macro}{\bd@abstract} +% \mcmd{\bd@abstract}\marg{abstract} uses \meta{abstract} as the +% abstract of the dissertation. +% \begin{macrocode} +\newcommand{\bd@abstract}[1]{% + \begin{abstract}#1\end{abstract}} +% \end{macrocode} +% \end{macro}^^A \bd@abstract +% +% \section{Signature Page} +% +% \begin{macro}{\signaturepage} +% \begin{macro}{\bd@sig@page} +% \begin{macro}{\if@bd@sig@lines} +% \mcmd{\signaturepage}\ostar produces the signature page. +% +% The starred version produces the one to be signed on the day of +% the defense while the unstarred version produces the one to appear +% in the printed version. The choice is recorded by +% \cmd{\if@bd@sig@lines}. +% \begin{macrocode} +\let\if@bd@sig@lines\@secondoftwo +\newcommand{\signaturepage}{% + \@ifstar{\let\if@bd@sig@lines\@firstoftwo\bd@sig@page}% + {\let\if@bd@sig@lines\@secondoftwo\bd@sig@page}} +\newcommand{\bd@sig@page}{% +% \end{macrocode} +% \label{p:sigpage-comm-sign-length}We first find the widest entry +% for a committee member; this is the length of the signature lines for +% the committee. +% \begin{macrocode} + \bd@upd@signline@lngth{\@advisor, Chair} + \let\do\bd@upd@signline@lngth\@committee +% \end{macrocode} +% We remove page numbering and typeset the introduction text. +% \begin{macrocode} + \thispagestyle{empty}% + \begin{flushleft}% + \vspace*{.15in}% + This dissertation, directed and approved by \@author's + committee, has been accepted and approved by the Graduate + Faculty of Brandeis University in partial fulfillment of the + requirements for the degree of: + \vspace*{0.25in}% + \begin{flushright}% + \centerline{\bfseries DOCTOR OF PHILOSOPHY}% + \par + \parbox{3.6in}{% + \vspace{.8in}% + \if@bd@sig@lines{\bd@signline{2.9in}}{}% + \@dean, Dean of Arts and Sciences}% + \end{flushright}% + \vspace*{0.4in}% +% \end{macrocode} +% The preamble stores the list of committee members in +% \cmd{\@committee} with each reader +% enclosed in \cmd{\do}\{\meta{reader}\}. We list the committee +% (with their possible signature lines) by setting \cmd{\do} be +% \cmd{\bd@sig@page@item}. +% \begin{macrocode} + Dissertation Committee: + \par + \bd@sig@page@item{\@advisor, Chair}% + {\let\do\bd@sig@page@item\@committee}% + \end{flushleft} + \clearpage} +% \end{macrocode} +% \end{macro}^^A \if@bd@sig@lines +% \end{macro}^^A \bd@sig@page +% \end{macro}^^A \signaturepage +% +% \begin{macro}{\bd@sig@page@item} +% \mcmd{\bd@sig@page@item}\marg{member} typesets \meta{member} as a +% committee member. It uses \cmd{\if@bd@sig@lines} to decide +% whether to add signature lines. +% \begin{macrocode} +\newcommand{\bd@sig@page@item}[1]{% + \if@bd@sig@lines{% + \penalty10000\vskip.6in minus 1in% + \bd@signline{\bd@comm@signline@lngth}}% + {\par}% + #1} +% \end{macrocode} +% \end{macro}^^A \bd@sig@page@item +% +% \subsection{Signature Line} +% +% The following macros manages signature lines. We start with +% \cmd{\bd@signline} to typeset a signature line. +% \begin{macro}{\bd@signline} +% \mcmd{\bd@signline}\marg{witdh} produces a line of width \meta{width} for signatures. +% \begin{macrocode} +\newcommand{\bd@signline}[1]{% + \rule[.5\baselineskip]{#1}{0.4pt}\hskip-#1\relax\ignorespaces} +% \end{macrocode} +% \end{macro}^^A \bd@signline +% +% \begin{macro}{\bd@comm@signline@lngth} +% \begin{macro}{\bd@upd@signline@lngth} +% To get the same length on the signature lines for the committee, +% we process the committee (see \cmd{\signaturepage} on +% p.~\pageref{p:sigpage-comm-sign-length} +% \begin{macrocode} +\newlength{\bd@comm@signline@lngth} +\setlength{\bd@comm@signline@lngth}{2.5in} +\newcommand{\bd@upd@signline@lngth}[1]{% + {\setbox0=\hbox{#1}% + \ifdim \wd0>\bd@comm@signline@lngth + \global\bd@comm@signline@lngth=\wd0 + \fi}} +% \end{macrocode} +% \end{macro}^^A \bd@upd@signline@lngth +% \end{macro}^^A bd@comm@signline@lngth +% +% \begin{environment}{optionalpage*} +% \begin{environment}{optionalpage} +% These environments are used for optional pages: dedication, +% acknowledgments, preface. They take \meta{title} as their single +% argument. +% +% The unstarred version adds an entry to +% the table of contents. +% \begin{macrocode} +\newenvironment{optionalpage}[1]{% + \chapter{#1}}% + {\clearpage} +\newenvironment{optionalpage*}[1]{% + \chapter*{#1}}% + {\clearpage} +% \end{macrocode} +% We do not use \cmd{\chapter}\ostar as +% this has a large space on the top of the page. +% The output will be double-spaced, but you can easily change that. +% \end{environment}^^A optionalpage +% \end{environment}^^A optionalpage* +% +% \section{Optional Pages} +% \begin{macro}{\bd@optpage} +% \begin{macro}{\bd@optpage@i} +% \mcmd{\bd@optpage}\ostar\textbf{\cs{\meta{command}}}\marg{title} +% typesets an optional page titled \meta{title} with contents of +% \cs{\meta{command}} provided that the expansion of \cs{\meta{command}} +% is not-empty. +% \begin{macrocode} +\newcommand{\bd@optpage}{% + \@ifstar{\bd@optpage@i{optionalpage*}}{\bd@optpage@i{optionalpage}}} +% \end{macrocode} +% We test for the optional star to decide on the environment to +% use. Then \cmd{\bd@optpage@i} does the actual typesetting. +% \begin{macrocode} +\newcommand{\bd@optpage@i}[3]{% + \ifx\@empty#3 + \expandafter\@gobble + \else + \expandafter\@iden + \fi + {\begin{#1}{#2}#3\end{#1}}} +% \end{macrocode} +% \end{macro}^^A \bd@optpage@i +% \end{macro}^^A \bd@optpage +% +%^^A \section{Obsolete \package{book} Commands} +%^^A Various features of the \package{book} class conflict with the +%^^A commands in this class and we disable them +% \begin{macrocode} +%</class> +% \end{macrocode} +% \Finale \sloppy \PrintChanges +% +% \endinput +% ^^A LocalWords: minmargins papersubmission + diff --git a/Master/texmf-dist/source/latex/brandeis-dissertation/brandeis-dissertation.ins b/Master/texmf-dist/source/latex/brandeis-dissertation/brandeis-dissertation.ins new file mode 100644 index 00000000000..422fef2d0f0 --- /dev/null +++ b/Master/texmf-dist/source/latex/brandeis-dissertation/brandeis-dissertation.ins @@ -0,0 +1,35 @@ +%% CVSId: $Id: brandeis-dissertation.ins,v 1.1 2004/10/27 00:49:52 turtle Exp $ +%% brandeis-dissertation.ins (c)2004 Peter Møller Neergaard +% +% This program may be distributed and/or modified under the +% conditions of the LaTeX Project Public License, either version 1.2 +% of this license or (at your option) any later version. +% The latest version of this license is in +% http://www.latex-project.org/lppl.txt +% and version 1.2 or later is part of all distributions of LaTeX +% version 1999/12/01 or later. +% +% This program consists of the files brandeis-dissertation.dtx and +% brandeis-dissertation.ins. +% +% This file is the driver program used to install the +% brandeis-dissertation class from the file brandeis-dissertation.dtx. +% +% You install the package by running tex on brandeis-dissertation.ins, +% i.e., +% +% tex brandeis-dissertation.ins +% +% You can then produce the documentation by +% +% latex brandeis-dissertation.tex + +\def\batchfile{brandeis-dissertation.ins} +\input docstrip + +\keepsilent + +\generate{% + \file{brandeis-dissertation.cls}{\from{brandeis-dissertation.dtx}{class}} + \file{brandeis-dissertation.tex}{\from{brandeis-dissertation.dtx}{driver}}} + diff --git a/Master/texmf-dist/tex/latex/brandeis-dissertation/brandeis-dissertation.cls b/Master/texmf-dist/tex/latex/brandeis-dissertation/brandeis-dissertation.cls new file mode 100644 index 00000000000..49b06df2ea7 --- /dev/null +++ b/Master/texmf-dist/tex/latex/brandeis-dissertation/brandeis-dissertation.cls @@ -0,0 +1,405 @@ +%% +%% This is file `brandeis-dissertation.cls', +%% generated with the docstrip utility. +%% +%% The original source files were: +%% +%% brandeis-dissertation.dtx (with options: `class') +%% +%% IMPORTANT NOTICE: +%% +%% For the copyright see the source file. +%% +%% Any modified versions of this file must be renamed +%% with new filenames distinct from brandeis-dissertation.cls. +%% +%% For distribution of the original source see the terms +%% for copying and modification in the file brandeis-dissertation.dtx. +%% +%% This generated file may be distributed as long as the +%% original source files, as listed above, are part of the +%% same distribution. (The sources need not necessarily be +%% in the same archive or directory.) +%% \RCS$Id: brandeis-dissertation.dtx,v 2.0 2004/10/27 00:47:04 turtle Exp $ +%% \RCS$Revision: 2.0 $ +%% \RCS$Date: 2013/10/17 00:47:04 $ +%% +%% (C) 2000 Andy Garland (aeg@cs.brandeis.edu) +%% (C) 2001 Pablo Funes (pablo@cs.brandeis.edu) +%% (C) 2004 Peter Møller Neergaard +%% (C) 2013 Meg Peck and John Burt +%% +%% This program may be distributed and/or modified under the +%% conditions of the LaTeX Project Public License, either version 1.2 +%% of this license or (at your option) any later version. +%% The latest version of this license is in +%% http://www.latex-project.org/lppl.txt +%% and version 1.2 or later is part of all distributions of LaTeX +%% version 1999/12/01 or later. +\NeedsTeXFormat{LaTeX2e} +\ProvidesClass{brandeis-dissertation}% + [2004/10/21 v1.0 Brandeis dissertation settings] +\newif\ifbd@blankclear +\DeclareOption{blankcleared}{\bd@blankcleartrue} +\DeclareOption{numbercleared}{\bd@blankclearfalse} +\newif\ifbd@minmar +\DeclareOption{minmargins}{\bd@minmartrue} +\DeclareOption{15margins}{\bd@minmarfalse} +\newif\ifbd@nochange@small@ftnt +\DeclareOption{12pt}{\def\bd@book@size{12pt}% + \bd@nochange@small@ftntfalse} +\DeclareOption{11pt}{\def\bd@book@size{11pt}% + \bd@nochange@small@ftnttrue} +\DeclareOption{10pt}{\def\bd@book@size{10}% + \bd@nochange@small@ftnttrue} +\DeclareOption{oneside}{\def\bd@book@side{oneside}} +\DeclareOption{twoside}{\def\bd@book@side{twoside}} +\DeclareOption{draft}{\def\bd@book@final{draft}} +\DeclareOption{final}{\def\bd@book@final{final}} +\DeclareOption{openright}{\def\bd@book@openrght{openright}} +\DeclareOption{openany}{\def\bd@book@openrght{openany}} +\DeclareOption{leqno}{\PassOptionsToClass{book}{\currentoption}} +\DeclareOption{fleqno}{\PassOptionsToClass{book}{\currentoption}} +\DeclareOption{openbib}{\PassOptionsToClass{book}{\currentoption}} +\DeclareOption{openbib}{\def\bd@book@openbib{openbib}} +\ExecuteOptions{12pt,openright,final,oneside,% + minmargins,copyright,nolot,lof} +\ProcessOptions* +\LoadClass[letterpaper,\bd@book@size,\bd@book@side,% + \bd@book@final,\bd@book@openrght]{book} +\ifbd@nochange@small@ftnt + \let\small\normalsize + \let\footnotesize\normalsize +\fi +\let\bd@cleardoublepage@save\cleardoublepage +\newcommand{\bd@cleardoublepageblank}{% + \clearpage + \thispagestyle{empty}% + \bd@cleardoublepage@save} +\ifbd@blankclear + \AtBeginDocument{\let\cleardoublepage\bd@cleardoublepageblank} +\fi +\RequirePackage[doublespacing]{setspace} +\let\bd@thebibliography\thebibliography +\let\bd@endthebibliography\endthebibliography +\renewenvironment{thebibliography}% + {\begin{singlespace}\bd@thebibliography}% + {\bd@endthebibliography\end{singlespace}} +\let\bd@theindex\theindex +\let\bd@endtheindex\endtheindex +\renewenvironment{theindex}{% + \addcontentsline{toc}{chapter}% + {\protect\numberline{}\indexname}% + \bd@theindex\begin{singlespace}\small}% + {\end{singlespace}\bd@endtheindex} +\let\bd@quotation\quotation +\let\bd@endquotation\endquotation +\renewenvironment{quotation}% + {\begin{singlespace}\bd@quotation}% + {\bd@endquotation\end{singlespace}} +\everydisplay\expandafter{% + \the\everydisplay + \def\baselinestretch{1.2}\selectfont} +\smallskipamount=2pt plus 1.5pt minus 1.5pt +\smallskipamount=4pt plus 3pt minus 3pt +\bigskipamount=8pt plus 6pt minus 6pt +\RequirePackage[letterpaper]{geometry} +\ifbd@minmar + \geometry{left=1in, top=1in, right=1in, bottom=1in, + marginparwidth=.5in} +\else + \geometry{margin=1.5in,marginparwidth=1in} +\fi +\if@twoside + \def\ps@brandeisheadings{% + \def\@evenfoot{\hfil\thepage\hfil}% + \def\@oddfoot{\hfil\thepage\hfil}% + \def\@evenhead{\relax}% + \def\@oddhead{\relax}% + % \def\@evenhead{\hfil{\slhape\leftmark}\hfil}% + % \def\@oddhead{\hfil{\slshape\rightmark}\hfil}% + \let\@mkboth\markboth + \def\chaptermark##1{% + \markboth {\MakeUppercase{% + \ifnum \c@secnumdepth >\m@ne + \if@mainmatter + \@chapapp\ \thechapter. \ % + \fi + \fi + ##1}}{}}% + \def\sectionmark##1{% + \markright {\MakeUppercase{% + \ifnum \c@secnumdepth >\z@ + \thesection. \ % + \fi + ##1}}}} +\else + \def\ps@brandeisheadings{% + + \def\@oddfoot{\hfil\thepage\hfil}% + \def\@oddhead{\hfil{\slshape\rightmark}\hfil}% + \let\@mkboth\markboth + \def\chaptermark##1{% + \markright {\MakeUppercase{% + \ifnum \c@secnumdepth >\m@ne + \if@mainmatter + \@chapapp\ \thechapter. \ % + \fi + \fi + ##1}}}} +\fi +\let\bd@ps@plain@saved\ps@plain +\let\bd@ps@empty@saved\ps@empty +\let\bd@ps@headings@saved\ps@headings +\let\bd@ps@myheadings@saved\ps@myheadings +\let\bd@ps@brandeisheadings@saved\ps@brandeisheadings +\def\ps@plain{\geometry{includehead=false,includefoot}% + \bd@ps@plain@saved} +\def\ps@pempty{\geometry{includehead=false,includefoot=false}% + \bd@ps@empty@saved} +\def\ps@headings{\geometry{includehead,includefoot=false}% + \bd@ps@headings@saved} +\def\ps@myheadings{\geometry{includehead,includefoot=false}% + \bd@ps@myheadings@saved} +\def\ps@brandeisheadings{\geometry{includehead,includefoot}% + \bd@ps@brandeisheadings@saved} +\AtBeginDocument{% + \let\ps@plain\bd@ps@plain@saved + \let\ps@empty\bd@ps@empty@saved + \let\ps@headings\bd@ps@headings@saved + \let\ps@myheadings\bd@ps@myheadings@saved + \let\ps@brandeisheadings\bd@ps@brandeisheadings@saved + \let\bd@ps@plain\@undefined + \let\bd@ps@empty\@undefined + \let\bd@ps@headings\@undefined + \let\bd@ps@myheadings\@undefined + \let\bd@ps@brandeisheadings\@undefined} +\pagestyle{brandeisheadings} +\newcommand{\thesisfront}[1][]{% + \@for\bd@option:=#1\do{% + \@ifundefined{bd@tf@\bd@option}{% + \@latex@error{\@backslashchar thesisfront: option `\bd@option' + unknown}% + {The option you have specified is unknown. Check the spelling +and \MessageBreak consult the documentation for the\MessageBreak +brandeis-dissertation class.}}% + {\@nameuse{bd@tf@\bd@option}}}% + \frontmatter + \bgroup + \pagestyle{empty} + \thesistitlepage\cleardoublepage + \if@bd@onlinesubmission{\signaturepage}{\signaturepage*}% + \cleardoublepage + \if@bd@crpage{\copyrightpage{\@author}{\@graduationyear}% + \cleardoublepage}% + \ifx\@dedication\@empty\else + \dedicationpage{\@dedication}% + \cleardoublepage + \fi + \cleardoublepage + \egroup + \bd@optpage*{Acknowledgments}{\@acknowledgments}% + \cleardoublepage + \bd@abstract{\@thesisabstract}% + \cleardoublepage + \bd@optpage{Preface}{\@preface}% + \cleardoublepage + \tableofcontents + \cleardoublepage + \if@bd@lot{\listoftables\cleardoublepage}% + \if@bd@lof{\listoffigures\cleardoublepage}% + \mainmatter} +\let\if@bd@onlinesubmission\@firstoftwo +\newcommand{\bd@tf@onlinesubmission}{% + \let\if@bd@onlinesubmission\@firstoftwo} +\newcommand{\bd@tf@papersubmission}{% + \let\if@bd@onlinesubmission\@secondoftwo} +\let\if@bd@crpage\@iden +\newcommand{\bd@tf@copyrightpage}{\let\if@bd@crpage\@iden} +\newcommand{\bd@tf@nocopyrightpage}{\let\if@bd@crpage\@gobble} +\let\if@bd@lot\@gobble +\newcommand{\bd@tf@lot}{\let\if@bd@lot\@iden} +\newcommand{\bd@tf@nolot}{\let\if@bd@lot\@gobble} +\let\if@bd@lof\@gobble +\newcommand{\bd@tf@lof}{\let\if@bd@lof\@iden} +\newcommand{\bd@tf@nolof}{\let\if@bd@lof\@gobble} +\setcounter{tocdepth}{1} +\let\bd@org@tableofcontents\tableofcontents +\renewcommand{\tableofcontents}{% + \begin{singlespace} + \bd@org@tableofcontents + \end{singlespace}} +\let\bd@org@listoftables\listoftables +\renewcommand{\listoftables}{% + \begin{singlespace} + \bd@org@listoftables + \end{singlespace}} +\let\bd@org@listoffigures\listoffigures +\renewcommand{\listoffigures}{% + \begin{singlespace} + \bd@org@listoffigures + \end{singlespace}} +\renewcommand\mainmatter{% + \clearpage + \@mainmattertrue + \pagenumbering{arabic}} +\gdef\@acknowledgments{} +\gdef\@advisor{} +\gdef\@dean{} +\gdef\@dedication{} +\gdef\@department{} +\gdef\@graduationmonth{May} +\xdef\@graduationyear{\the\year} +\gdef\@othercopyright{} +\gdef\@preface{} +\gdef\@thesisabstract{} +\newcommand{\acknowledgments}[1]{\gdef\@acknowledgments{#1}} +\newcommand{\advisor}[1]{\gdef\@advisor{#1}} +\newcommand{\dean}[1]{\gdef\@dean{#1}} +\newcommand{\dedication}[1]{\gdef\@dedication{#1}} +\newcommand{\department}[1]{\gdef\@department{#1}} +\newcommand{\graduationmonth}[1]{\gdef\@graduationmonth{#1}} +\newcommand{\graduationyear}[1]{\gdef\@graduationyear{#1}} +\newcommand{\othercopyright}[1]{\gdef\@othercopyright{#1}} +\newcommand{\preface}[1]{\gdef\@preface{#1}} +\newcommand{\thesisabstract}[1]{\gdef\@thesisabstract{#1}} +\newcommand{\reader}[1]{% + \expandafter\gdef + \expandafter\@committee + \expandafter{\@committee\do{#1}}} +\gdef\@committee{} +\newcommand{\thesistitlepage}{ + \thispagestyle{empty}% + \begin{center} + \vspace*{.25in}% + {\Huge \bf\baselineskip=.8\baselineskip \@title\\} + \vspace*{.5in}% + A Dissertation\\ + \vspace*{.25in}% + Presented to\\ + The Faculty of the Graduate School of Arts and Sciences\\ + Brandeis University\\ + \@department\\ + \@advisor, Advisor\\ + \vspace*{.5in} + In Partial Fulfillment\\ + of the Requirements for the Degree\\ + Doctor of Philosophy\\ + \vspace*{.5in} + by\\ + \@author\\ + \@graduationmonth, \@graduationyear\\ + \end{center}% + \clearpage} +\newcommand{\copyrightpage}[2]{% + \thispagestyle{empty}% + \begin{center} + \vspace*{2.5in} + \copyright Copyright by \\ + \vspace*{.05in} + #1 \\ + \vspace*{.05in} + #2 + \end{center} + \vspace{0pt}\vfill% + \begin{singlespace} + \begin{raggedright} + \small + \@othercopyright + \end{raggedright} + \end{singlespace} + \clearpage} +\newcommand{\dedicationpage}[1]{% + \thispagestyle{empty}% + \vspace*{2.5in}% + \begin{center}% + #1 + \end{center}% + \clearpage} +\newenvironment{abstract}{% + \addcontentsline{toc}{chapter}{Abstract} + \begin{singlespace} + \thispagestyle{plain} + \begin{center} + {\Huge\bf Abstract\\}% + \vspace*{.2in}% + {\large\bf \@title \\}% + \vspace*{.1in}% + \noindent + A dissertation presented to the Faculty of \\ + the Graduate School of Arts and Sciences of \\ + Brandeis University, Waltham, Massachusetts \\ + \vspace*{0.1in} + by \@author + \end{center} + \end{singlespace}% + \begin{doublespace} + \noindent}% + {\end{doublespace}% + \clearpage} +\newcommand{\bd@abstract}[1]{% + \begin{abstract}#1\end{abstract}} +\let\if@bd@sig@lines\@secondoftwo +\newcommand{\signaturepage}{% + \@ifstar{\let\if@bd@sig@lines\@firstoftwo\bd@sig@page}% + {\let\if@bd@sig@lines\@secondoftwo\bd@sig@page}} +\newcommand{\bd@sig@page}{% + \bd@upd@signline@lngth{\@advisor, Chair} + \let\do\bd@upd@signline@lngth\@committee + \thispagestyle{empty}% + \begin{flushleft}% + \vspace*{.15in}% + This dissertation, directed and approved by \@author's + committee, has been accepted and approved by the Graduate + Faculty of Brandeis University in partial fulfillment of the + requirements for the degree of: + \vspace*{0.25in}% + \begin{flushright}% + \centerline{\bfseries DOCTOR OF PHILOSOPHY}% + \par + \parbox{3.6in}{% + \vspace{.8in}% + \if@bd@sig@lines{\bd@signline{2.9in}}{}% + \@dean, Dean of Arts and Sciences}% + \end{flushright}% + \vspace*{0.4in}% + Dissertation Committee: + \par + \bd@sig@page@item{\@advisor, Chair}% + {\let\do\bd@sig@page@item\@committee}% + \end{flushleft} + \clearpage} +\newcommand{\bd@sig@page@item}[1]{% + \if@bd@sig@lines{% + \penalty10000\vskip.6in minus 1in% + \bd@signline{\bd@comm@signline@lngth}}% + {\par}% + #1} +\newcommand{\bd@signline}[1]{% + \rule[.5\baselineskip]{#1}{0.4pt}\hskip-#1\relax\ignorespaces} +\newlength{\bd@comm@signline@lngth} +\setlength{\bd@comm@signline@lngth}{2.5in} +\newcommand{\bd@upd@signline@lngth}[1]{% + {\setbox0=\hbox{#1}% + \ifdim \wd0>\bd@comm@signline@lngth + \global\bd@comm@signline@lngth=\wd0 + \fi}} +\newenvironment{optionalpage}[1]{% + \chapter{#1}}% + {\clearpage} +\newenvironment{optionalpage*}[1]{% + \chapter*{#1}}% + {\clearpage} +\newcommand{\bd@optpage}{% + \@ifstar{\bd@optpage@i{optionalpage*}}{\bd@optpage@i{optionalpage}}} +\newcommand{\bd@optpage@i}[3]{% + \ifx\@empty#3 + \expandafter\@gobble + \else + \expandafter\@iden + \fi + {\begin{#1}{#2}#3\end{#1}}} + +\endinput +%% +%% End of file `brandeis-dissertation.cls'. diff --git a/Master/tlpkg/bin/tlpkg-ctan-check b/Master/tlpkg/bin/tlpkg-ctan-check index 1aba71d86e5..c367f8ca834 100755 --- a/Master/tlpkg/bin/tlpkg-ctan-check +++ b/Master/tlpkg/bin/tlpkg-ctan-check @@ -92,7 +92,8 @@ my @TLP_working = qw( booktabs booktabs-de booktabs-fr boolexpr boondox bophook borceux bosisio boxedminipage boxhandler bpchem bpolynomial - bracketkey braids braille braket breakcites breakurl bropd brushscr + bracketkey braids braille braket brandeis-dissertation + breakcites breakurl bropd brushscr bullcntr bundledoc burmese bussproofs bxbase bxcjkjatype bxdpx-beamer bxeepic bxjscls bytefield c-pascal cabin cachepic calcage calctab calculator diff --git a/Master/tlpkg/tlpsrc/brandeis-dissertation.tlpsrc b/Master/tlpkg/tlpsrc/brandeis-dissertation.tlpsrc new file mode 100644 index 00000000000..e69de29bb2d --- /dev/null +++ b/Master/tlpkg/tlpsrc/brandeis-dissertation.tlpsrc diff --git a/Master/tlpkg/tlpsrc/collection-publishers.tlpsrc b/Master/tlpkg/tlpsrc/collection-publishers.tlpsrc index 2feae0b3499..d241d023275 100644 --- a/Master/tlpkg/tlpsrc/collection-publishers.tlpsrc +++ b/Master/tlpkg/tlpsrc/collection-publishers.tlpsrc @@ -25,6 +25,7 @@ depend asaetr depend ascelike depend beamer-FUBerlin depend bgteubner +depend brandeis-dissertation depend cascadilla depend chem-journal depend classicthesis |