summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Master/texmf-dist/tex/latex/lettrine/lettrine.cfg30
-rw-r--r--Master/texmf-dist/tex/latex/lettrine/lettrine.sty212
-rw-r--r--Master/texmf-dist/tex/latex/lettrine/optfile.cfl29
-rw-r--r--Master/texmf-dist/tex/latex/lettrine/pacl.cfl82
-rw-r--r--Master/texmf-dist/tex/latex/lettrine/padl.cfl85
5 files changed, 438 insertions, 0 deletions
diff --git a/Master/texmf-dist/tex/latex/lettrine/lettrine.cfg b/Master/texmf-dist/tex/latex/lettrine/lettrine.cfg
new file mode 100644
index 00000000000..042aab49ccc
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/lettrine/lettrine.cfg
@@ -0,0 +1,30 @@
+%%% lettrine.cfg: configuration file for lettrine.sty
+%%% Daniel Flipo <Daniel.Flipo@univ-lille1.fr>
+
+%%% If you want to customize lettrine, please *do not* hack into the
+%%% code, copy this file to the directory where lettrine.sty lies
+%%% and customize it as you like.
+
+%%% Uncomment these lines and change the parameters' values to fit
+%%% your needs (see lettrine.dtx).
+
+%\setcounter{DefaultLines}{2}
+
+%%% These are *decimal* numbers:
+%\renewcommand{\DefaultLoversize}{0}
+%\renewcommand{\DefaultLraise}{0}
+%\renewcommand{\DefaultLhang}{0}
+
+%%% These are *lengths* (don't forget the unit):
+%\setlength{\DefaultFindent}{0pt}
+%\setlength{\DefaultNindent}{0.5em}
+%\setlength{\DefaultSlope}{0mm}
+
+%%% This is a *flag* (value=true/false):
+%\LettrineImagefalse
+
+%%% In case you want to set parameters for some letters
+%%% in file `optfile.cfl'
+%\renewcommand{\DefaultOptionsFile}{optfile.cfl}
+
+\endinput
diff --git a/Master/texmf-dist/tex/latex/lettrine/lettrine.sty b/Master/texmf-dist/tex/latex/lettrine/lettrine.sty
new file mode 100644
index 00000000000..c327b305bb9
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/lettrine/lettrine.sty
@@ -0,0 +1,212 @@
+%%
+%% This is file `lettrine.sty',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% lettrine.dtx (with options: `code')
+%%
+%% IMPORTANT NOTICE:
+%%
+%% For the copyright see the source file.
+%%
+%% Any modified versions of this file must be renamed
+%% with new filenames distinct from lettrine.sty.
+%%
+%% For distribution of the original source see the terms
+%% for copying and modification in the file lettrine.dtx.
+%%
+%% This generated file may be distributed as long as the
+%% original source files, as listed above, are part of the
+%% same distribution. (The sources need not necessarily be
+%% in the same archive or directory.)
+\ProvidesFile{lettrine.sty}
+ [2004/05/22 v1.6 (D. Flipo)]
+%% Please report errors to: Daniel.Flipo@univ-lille1.fr
+%%
+\NeedsTeXFormat{LaTeX2e}[1995/12/01]
+\RequirePackage{keyval}
+\newcounter{DefaultLines}
+\setcounter{DefaultLines}{2}
+\newcommand*{\DefaultOptionsFile}{\relax}
+\newcommand*{\DefaultLoversize}{0}
+\newcommand*{\DefaultLraise}{0}
+\newcommand*{\DefaultLhang}{0}
+\newdimen\DefaultFindent
+\setlength{\DefaultFindent}{\z@}
+\newdimen\DefaultNindent
+\setlength{\DefaultNindent}{0.5em}
+\newdimen\DefaultSlope
+\setlength{\DefaultSlope}{\z@}
+\newif\ifLettrineImage
+\newsavebox{\L@lbox}
+\newsavebox{\L@tbox}
+\newcounter{L@lines}
+\newdimen\L@Pindent
+\newdimen\L@Findent
+\newdimen\L@Nindent
+\newdimen\L@lraise
+\newdimen\L@first
+\newdimen\L@next
+\newdimen\L@slope
+\newdimen\L@height
+\newcommand*{\L@file}{}
+\newcommand*{\L@hang}{}
+\newcommand*{\L@oversize}{}
+\newcommand*{\L@raise}{}
+\newcommand*{\L@ante}{}
+\newif\ifL@image
+\newcommand*{\LettrineTextFont}{\scshape}
+\def\Lettrine@height{%
+ \@tempdima=\baselineskip
+ \setlength{\L@height}{\theL@lines\@tempdima}%
+ \ifnum\theL@lines>1
+ \addtolength{\L@height}{-\@tempdima}%
+ \fi
+ \sbox{\L@tbox}{\LettrineTextFont x}%
+ \addtolength{\L@height}{\ht\L@tbox}%
+ \addtolength{\L@height}{\L@oversize\L@height}}
+\newcommand*{\LettrineFontHook}{}
+\newcommand*{\LettrineFont}{%
+ \Lettrine@height
+ \sbox{\L@tbox}{\LettrineFontHook\fontsize{\L@height}{\L@height}%
+ \selectfont X}%
+ \@tempcntb=\ht\L@tbox
+ \@tempcnta=\L@height
+ \multiply\@tempcnta by 100
+ \divide\@tempcntb by 100
+ \divide\@tempcnta by \@tempcntb
+ \advance\@tempcnta by -9999
+ \ifnum\@tempcnta>0
+ \def\@tempa{1.\the\@tempcnta}%
+ \else
+ \def\@tempa{1}%
+ \fi
+ \LettrineFontHook
+ \fontsize{\@tempa\L@height}{\@tempa\L@height}%
+ \selectfont
+}
+\newcommand*{\LettrineFontEPS}{%
+ \Lettrine@height\LettrineFontHook
+ \includegraphics[height=\L@height]}
+\define@key{L}{lines}{\setcounter{L@lines}{#1}}
+\define@key{L}{lhang}{\renewcommand*{\L@hang}{#1}}
+\define@key{L}{loversize}{\renewcommand*{\L@oversize}{#1}}
+\define@key{L}{lraise}{\renewcommand*{\L@raise}{#1}}
+\define@key{L}{ante}{\renewcommand*{\L@ante}{#1}}
+\define@key{L}{findent}{\setlength{\L@Findent}{#1}}
+\define@key{L}{nindent}{\setlength{\L@Nindent}{#1}}
+\define@key{L}{slope}{\setlength{\L@slope}{#1}}
+\define@key{L}{image}[true]{\csname L@image#1\endcsname}
+\newcommand*{\LettrineOptionsFor}[2]{\@namedef{l@#1-keys}{#2}}
+\newdimen\LettrineWidth
+\def\lettrine{\@ifnextchar[\@lettrine{\@lettrine[]}}
+\def\@lettrine[#1]#2#3{%
+ \setcounter{L@lines}{\theDefaultLines}%
+ \renewcommand*{\L@hang}{\DefaultLhang}%
+ \renewcommand*{\L@oversize}{\DefaultLoversize}%
+ \renewcommand*{\L@raise}{\DefaultLraise}%
+ \renewcommand*{\L@ante}{}%
+ \setlength{\L@Findent}{\DefaultFindent}%
+ \setlength{\L@Nindent}{\DefaultNindent}%
+ \setlength{\L@slope}{\DefaultSlope}%
+ \ifLettrineImage\L@imagetrue\else\L@imagefalse\fi
+ \if\DefaultOptionsFile\relax
+ \else
+ \begingroup
+ \InputIfFileExists{\DefaultOptionsFile}%
+ {}%
+ {\PackageWarning{lettrine.sty}%
+ {File \DefaultOptionsFile\space not found}%
+ }%
+ \def\color##1##{\l@color{##1}}%
+ \let\l@color\@gobbletwo
+ \def\textcolor##1##{\l@textcolor{##1}}%
+ \def\l@textcolor##1##2##3{##3}%
+ \expandafter\ifx\csname l@#2-keys\endcsname\relax
+ \gdef\l@LOKeys{}%
+ \else
+ \xdef\l@LOKeys{\csname l@#2-keys\endcsname}%
+ \fi
+ \endgroup
+ \def\KV@prefix{KV@L@}%
+ \let\@tempc\relax
+ \expandafter\KV@do\l@LOKeys,\relax,
+ \sbox{\L@lbox}{\LettrineFont #2}%
+ \settowidth{\LettrineWidth}{\usebox{\L@lbox}}%
+ \def\KV@prefix{KV@L@}%
+ \let\@tempc\relax
+ \expandafter\KV@do\l@LOKeys,\relax,
+ \fi
+ \setkeys{L}{#1}%
+ \ifL@image
+ \sbox{\L@lbox}{\LettrineFontEPS{#2}}%
+ \else
+ \sbox{\L@lbox}{\LettrineFont #2}%
+ \fi
+ \sbox{\L@tbox}{\LettrineTextFont{#3}}%
+ \@tempdima=\baselineskip
+ \ifnum\theL@lines=1
+ \setlength{\L@first}{\ht\L@lbox}%
+ \addtolength{\L@first}{-\ht\L@tbox}%
+ \setlength{\L@lraise}{\z@}%
+ \else
+ \setlength{\L@first}{-\theL@lines\@tempdima}%
+ \addtolength{\L@first}{\@tempdima}%
+ \sbox{\@tempboxa}{\LettrineTextFont x}%
+ \addtolength{\L@first}{-\ht\@tempboxa}%
+ \setlength{\L@lraise}{-\L@raise\L@first}%
+ \addtolength{\L@first}{\L@lraise}%
+ \addtolength{\L@first}{\ht\L@lbox}%
+ \addtolength{\L@lraise}{-\theL@lines\@tempdima}%
+ \addtolength{\L@lraise}{\@tempdima}%
+ \fi
+ \par
+ \ifdim\L@first>0.2\p@\vskip\L@first\fi
+ \setlength{\L@Pindent}{\wd\L@lbox}%
+ \addtolength{\L@Pindent}{-\L@hang\wd\L@lbox}%
+ \settowidth{\L@first}{\L@ante}%
+ \addtolength{\L@Pindent}{\L@first}%
+ \addtolength{\L@Pindent}{\L@Findent}%
+ \setlength{\L@first}{\linewidth}%
+ \addtolength{\L@first}{-\L@Pindent}%
+ \addtolength{\L@Nindent}{\L@Pindent}%
+ \setlength{\L@next}{\linewidth}%
+ \addtolength{\L@next}{-\L@Nindent}%
+ \addtolength{\L@Pindent}{\rightmargin}%
+ \addtolength{\L@Nindent}{\rightmargin}%
+ \addtocounter{L@lines}{1}%
+ \def\L@parshape{\c@L@lines \the\L@Pindent \the\L@first}%
+ \@tempcnta=\tw@
+ \@whilenum \@tempcnta<\c@L@lines\do{%
+ \edef\L@parshape{\L@parshape \the\L@Nindent \the\L@next}%
+ \addtolength{\L@Nindent}{\L@slope}%
+ \addtolength{\L@next}{-\L@slope}%
+ \advance\@tempcnta\@ne}%
+ \edef\L@parshape{\L@parshape \rightmargin \the\linewidth}%
+ \noindent\leavevmode
+ \parshape=\L@parshape
+ $\smash{\llap{\mbox{\L@ante}\raisebox{\L@lraise}{\usebox{\L@lbox}}%
+ \hskip \the\L@Findent}}$%
+ \usebox{\L@tbox}}
+\InputIfFileExists{lettrine.cfg}{}{}
+%%
+%% \CharacterTable
+%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%% Digits \0\1\2\3\4\5\6\7\8\9
+%% Exclamation \! Double quote \" Hash (number) \#
+%% Dollar \$ Percent \% Ampersand \&
+%% Acute accent \' Left paren \( Right paren \)
+%% Asterisk \* Plus \+ Comma \,
+%% Minus \- Point \. Solidus \/
+%% Colon \: Semicolon \; Less than \<
+%% Equals \= Greater than \> Question mark \?
+%% Commercial at \@ Left bracket \[ Backslash \\
+%% Right bracket \] Circumflex \^ Underscore \_
+%% Grave accent \` Left brace \{ Vertical bar \|
+%% Right brace \} Tilde \~}
+%%
+\endinput
+%%
+%% End of file `lettrine.sty'.
diff --git a/Master/texmf-dist/tex/latex/lettrine/optfile.cfl b/Master/texmf-dist/tex/latex/lettrine/optfile.cfl
new file mode 100644
index 00000000000..b41acdb4f38
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/lettrine/optfile.cfl
@@ -0,0 +1,29 @@
+%%% This is an example of config file *for syntax only*.
+%%% Copy it to your document's directory and add
+%%% \renewcommand{\DefaultOptionsFile}{optfile.cfl}
+%%% to your document's preamble to use it.
+%%%
+%%% The settings below are just *examples*, they are not meant to be good!
+%%% Proper values heavily depend on the font used!
+%%%
+%%% Letters not listed below, will get either the default parameters,
+%%% or those given as optional argument of \lettrine, if any.
+%%%
+%%% The values of the parameters set in this file can be overridden locally
+%%% using the optional argument of \lettrine.
+
+% A
+\LettrineOptionsFor{A}{slope=0.1\LettrineWidth, findent=-.5em, nindent=.7em}
+% Same parameters for \`A
+\LettrineOptionsFor{\`A}{slope=0.1\LettrineWidth, findent=-.5em, nindent=0.7em}
+% C'
+\LettrineOptionsFor{C'}{nindent=-0.5em}
+% I and J hang into the margin
+\LettrineOptionsFor{I}{lhang=1, nindent=0pt}
+\LettrineOptionsFor{J}{lhang=1, nindent=0pt}
+% Q
+\LettrineOptionsFor{Q}{loversize=0, lraise=0.1}
+% V
+\LettrineOptionsFor{V}{slope=-0.1\LettrineWidth, lhang=0.5, nindent=0pt}
+
+\endinput
diff --git a/Master/texmf-dist/tex/latex/lettrine/pacl.cfl b/Master/texmf-dist/tex/latex/lettrine/pacl.cfl
new file mode 100644
index 00000000000..07644712ea3
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/lettrine/pacl.cfl
@@ -0,0 +1,82 @@
+%%% This is file `pacl.cfl'.
+%%% It is provided under the LPPL. Copyright is hold by Pascal Kockaert.
+%%% If you modify this file you *MUST* change its name.
+%%%
+%%% This file contains config values to simplify the use of the
+%%% ACaslon-SwashItalic (aka pacri8s) font from Adobe
+%%% with the lettrine package by Daniel Flipo.
+%%%
+%%% If you want to use this file, your document should contain
+%%% the two next lines, without the leading percent signs.
+%%% \renewcommand\LettrineFontHook{\fontencoding{T1}\fontfamily{pacl}\selectfont}
+%%% \renewcommand{\DefaultOptionsFile}{pacl.cfl}
+%%%
+%%% The fontfamily pacl is defined through the file T1pacl.fd.
+%%% The contents of T1pacl.fd is listed at the end of this file.
+%%%
+%%% The settings below were defined according to my visual tastes.
+%%% No mathematical rule based on the metrices was applied.
+%%% Though the result may not please you, it should be better
+%%% than the default placement. This said, comments are welcome.
+%%%
+%%% Comments about this file can be sent to Pascal.Kockaert
+%%% at the mail server ulb.ac.be.
+
+
+\ProvidesFile{pacl.cfl}[2003/08/24 v0.1 Pascal Kockaert]
+\LettrineOptionsFor{A}{loversize= 0.15,lraise= 0.02,lhang= 0.30,findent= 0.00\LettrineWidth,nindent= 0.50em}
+\LettrineOptionsFor{B}{loversize= 0.15,lraise= 0.00,lhang= 0.25,findent=-0.05\LettrineWidth,nindent= 0.50em}
+\LettrineOptionsFor{C}{loversize=-0.10,lraise= 0.25,lhang= 0.05,findent= 0.00\LettrineWidth,nindent= 0.50em}
+\LettrineOptionsFor{D}{loversize= 0.15,lraise= 0.00,lhang= 0.20,findent=-0.07\LettrineWidth,nindent= 0.50em}
+\LettrineOptionsFor{E}{loversize= 0.15,lraise= 0.00,lhang= 0.05,findent=-0.10\LettrineWidth,nindent= 0.50em}
+\LettrineOptionsFor{F}{loversize=-0.10,lraise= 0.20,lhang= 0.00,findent= 0.05\LettrineWidth,nindent= 0.50em}
+\LettrineOptionsFor{G}{loversize=-0.10,lraise= 0.20,lhang= 0.05,findent=-0.05\LettrineWidth,nindent= 0.50em}
+\LettrineOptionsFor{H}{loversize= 0.05,lraise= 0.00,lhang= 0.25,findent= 0.00\LettrineWidth,nindent= 0.50em}
+\LettrineOptionsFor{I}{loversize= 0.15,lraise= 0.00,lhang= 0.00,findent= 0.00\LettrineWidth,nindent= 0.50em}
+\LettrineOptionsFor{J}{loversize=-0.10,lraise= 0.20,lhang= 0.00,findent= 0.00\LettrineWidth,nindent= 0.50em}
+\LettrineOptionsFor{K}{loversize=-0.10,lraise= 0.25,lhang= 0.00,findent= 0.00\LettrineWidth,nindent= 0.45\LettrineWidth}
+\LettrineOptionsFor{L}{loversize= 0.00,lraise= 0.20,lhang= 0.00,findent=-0.10\LettrineWidth,nindent= 0.40\LettrineWidth}
+\LettrineOptionsFor{M}{loversize= 0.15,lraise= 0.00,lhang= 0.24,findent=-0.05\LettrineWidth,nindent= 0.10\LettrineWidth}
+\LettrineOptionsFor{N}{loversize=-0.05,lraise= 0.25,lhang= 0.13,findent= 0.05\LettrineWidth,nindent= 0.35\LettrineWidth}
+\LettrineOptionsFor{O}{loversize= 0.15,lraise= 0.00,lhang= 0.05,findent=-0.12\LettrineWidth,nindent= 0.15\LettrineWidth}
+\LettrineOptionsFor{P}{loversize= 0.15,lraise= 0.00,lhang= 0.25,findent= 0.00\LettrineWidth,nindent= 0.50em}
+\LettrineOptionsFor{Q}{loversize=-0.15,lraise= 0.25,lhang= 0.10,findent=-0.05\LettrineWidth,nindent= 0.55\LettrineWidth}
+\LettrineOptionsFor{R}{loversize=-0.15,lraise= 0.25,lhang= 0.20,findent=-0.05\LettrineWidth,nindent= 0.45\LettrineWidth}
+\LettrineOptionsFor{S}{loversize=-0.10,lraise= 0.25,lhang=-0.05,findent=-0.05\LettrineWidth,nindent= 0.50em}
+\LettrineOptionsFor{T}{loversize= 0.15,lraise= 0.00,lhang= 0.15,findent= 0.00\LettrineWidth,nindent= 0.15\LettrineWidth}
+\LettrineOptionsFor{U}{loversize= 0.15,lraise= 0.00,lhang= 0.05,findent= 0.00\LettrineWidth,nindent= 0.50em}
+\LettrineOptionsFor{V}{loversize= 0.15,lraise= 0.00,lhang= 0.20,findent=-0.05\LettrineWidth,nindent= 0.50em}
+\LettrineOptionsFor{W}{loversize= 0.15,lraise= 0.00,lhang= 0.15,findent=-0.05\LettrineWidth,nindent= 0.50em}
+\LettrineOptionsFor{X}{loversize= 0.15,lraise= 0.00,lhang= 0.45,findent= 0.05\LettrineWidth,nindent= 0.15\LettrineWidth}
+\LettrineOptionsFor{Y}{loversize= 0.15,lraise= 0.00,lhang= 0.05,findent= 0.20\LettrineWidth,nindent= 0.25\LettrineWidth}
+\LettrineOptionsFor{Z}{loversize= 0.05,lraise= 0.15,lhang= 0.15,findent= 0.00\LettrineWidth,nindent= 0.30\LettrineWidth}
+\endinput
+
+
+% The installation of the pacl family can be performed using the fontinst package.
+% You must own the font ACaslon-SwashItalic, that is an AFM and a PFB file
+% which should be renamed as padri8w.afm and padri8w.pfb.
+%
+% You should process the file Makepacl.tex (see below) through TeX,
+% and follow the instructions of the fontinst manual to finish the install.
+% The file T1pacl.fd should be defined as below and put with other local FD files.
+
+%%% File Makepacl.tex
+\input fontinst.sty
+\installfonts
+ \declareencoding{T1-SWASH}{T1}
+ \fromafm{pacri8s} %%% File containing metrics of ACaslon-SwashItalic
+ \installfont{pacri9s}{pacri8s}{T1}{T1}{pacl}{m}{n}{}
+\endinstallfonts
+\bye
+%%% End of file Makepacl.tex
+
+% The pacl family is defined by the file T1pacl.fd, as follows
+
+%%% File T1pacl.fd
+%THIS FILE SHOULD BE PUT IN A TEX INPUTS DIRECTORY
+\ProvidesFile{t1pacl.fd}[2003/08/24 v1.0 Pascal Kockaert]
+\DeclareFontFamily{T1}{pacl}{}
+\DeclareFontShape{T1}{pacl}{m}{n}{<->pacri9s}{}
+\endinput
+%%% End of file T1pacl.fd
diff --git a/Master/texmf-dist/tex/latex/lettrine/padl.cfl b/Master/texmf-dist/tex/latex/lettrine/padl.cfl
new file mode 100644
index 00000000000..72eaeb60540
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/lettrine/padl.cfl
@@ -0,0 +1,85 @@
+%%% This is file `padl.cfl'.
+%%% It is provided under the LPPL. Copyright is hold by Pascal Kockaert.
+%%% If you modify this file you *MUST* change its name.
+%%%
+%%% This file contains config values to simplify the use of the
+%%% AGaramondAlt-Italic (aka padri8w) font from Adobe
+%%% with the lettrine package by Daniel Flipo.
+%%%
+%%% If you want to use this file, your document should contain
+%%% the two next lines, without the leading percent signs.
+%%% \renewcommand\LettrineFontHook{\fontencoding{T1}\fontfamily{padl}\selectfont}
+%%% \renewcommand{\DefaultOptionsFile}{padl.cfl}
+%%%
+%%% The fontfamily padl is defined through the file T1padl.fd.
+%%% The contents of T1padl.fd is listed at the end of this file.
+%%%
+%%% The settings below were defined according to my visual tastes.
+%%% No mathematical rule based on the metrices was applied.
+%%% Though the result may not please you, it should be better
+%%% than the default placement. This said, comments are welcome.
+%%%
+%%% Comments about this file can be sent to Pascal.Kockaert
+%%% at the mail server ulb.ac.be.
+
+
+
+\ProvidesFile{padl.cfl}[2003/08/24 v1.0 Pascal Kockaert]
+
+\LettrineOptionsFor{A}{loversize= 0.05,lraise= 0.10,lhang= 0.40,findent= 0.000\LettrineWidth,nindent= 0.50em}
+\LettrineOptionsFor{B}{loversize= 0.10,lraise= 0.00,lhang= 0.30,findent= 0.025\LettrineWidth,nindent= 0.50em}
+\LettrineOptionsFor{C}{loversize= 0.00,lraise= 0.10,lhang= 0.15,findent= 0.175\LettrineWidth,nindent= 0.50em}
+\LettrineOptionsFor{D}{loversize= 0.10,lraise= 0.00,lhang= 0.30,findent=-0.025\LettrineWidth,nindent= 0.50em}
+\LettrineOptionsFor{E}{loversize= 0.10,lraise= 0.00,lhang= 0.10,findent= 0.100\LettrineWidth,nindent= 0.50em}
+\LettrineOptionsFor{F}{loversize= 0.10,lraise= 0.00,lhang= 0.30,findent= 0.100\LettrineWidth,nindent= 0.50em}
+\LettrineOptionsFor{G}{loversize=-0.08,lraise= 0.20,lhang= 0.10,findent= 0.000\LettrineWidth,nindent= 0.50em}
+\LettrineOptionsFor{H}{loversize=-0.01,lraise= 0.00,lhang= 0.00,findent= 0.040\LettrineWidth,nindent= 0.50em}
+\LettrineOptionsFor{I}{loversize= 0.10,lraise= 0.00,lhang= 0.00,findent= 0.050\LettrineWidth,nindent= 0.50em}
+\LettrineOptionsFor{J}{loversize=-0.08,lraise= 0.20,lhang= 0.00,findent=-0.025\LettrineWidth,nindent= 0.50em}
+\LettrineOptionsFor{K}{loversize=-0.05,lraise= 0.25,lhang= 0.00,findent=-0.050\LettrineWidth,nindent= 0.60\LettrineWidth}
+\LettrineOptionsFor{L}{loversize= 0.00,lraise= 0.20,lhang= 0.00,findent= 0.100\LettrineWidth,nindent= 0.40\LettrineWidth}
+\LettrineOptionsFor{M}{loversize= 0.10,lraise= 0.00,lhang= 0.40,findent= 0.040\LettrineWidth,nindent= 0.10\LettrineWidth}
+\LettrineOptionsFor{N}{loversize= 0.00,lraise= 0.20,lhang= 0.20,findent=-0.010\LettrineWidth,nindent= 0.40\LettrineWidth}
+\LettrineOptionsFor{O}{loversize= 0.10,lraise= 0.00,lhang= 0.20,findent=-0.010\LettrineWidth,nindent= 0.50em}
+\LettrineOptionsFor{P}{loversize= 0.10,lraise= 0.00,lhang= 0.30,findent= 0.050\LettrineWidth,nindent= 0.50em}
+\LettrineOptionsFor{Q}{loversize= 0.00,lraise= 0.20,lhang= 0.20,findent= 0.050\LettrineWidth,nindent= 0.70\LettrineWidth}
+\LettrineOptionsFor{R}{loversize=-0.05,lraise= 0.25,lhang= 0.25,nindent= 0.500\LettrineWidth,nindent= 0.50\LettrineWidth}
+\LettrineOptionsFor{S}{loversize= 0.10,lraise= 0.05,lhang= 0.00,findent= 0.000\LettrineWidth,nindent= 0.50em}
+\LettrineOptionsFor{T}{loversize= 0.10,lraise= 0.00,lhang= 0.35,findent= 0.100\LettrineWidth,nindent= 0.50em}
+\LettrineOptionsFor{U}{loversize= 0.10,lraise= 0.00,lhang= 0.20,findent= 0.050\LettrineWidth,nindent= 0.50em}
+\LettrineOptionsFor{V}{loversize= 0.10,lraise= 0.00,lhang= 0.40,findent= 0.050\LettrineWidth,nindent= 0.50em}
+\LettrineOptionsFor{W}{loversize= 0.10,lraise= 0.00,lhang= 0.30,findent= 0.040\LettrineWidth,nindent= 0.50em}
+\LettrineOptionsFor{X}{loversize= 0.10,lraise= 0.00,lhang= 0.40,findent= 0.040\LettrineWidth,nindent= 0.20\LettrineWidth}
+\LettrineOptionsFor{Y}{loversize= 0.10,lraise= 0.00,lhang= 0.20,findent= 0.100\LettrineWidth,nindent= 0.20\LettrineWidth}
+\LettrineOptionsFor{Z}{loversize=-0.05,lraise= 0.25,lhang= 0.00,findent= 0.050\LettrineWidth,nindent= 0.55\LettrineWidth}
+\endinput
+
+
+% The installation of the padl family can be performed using the fontinst package.
+% You must own the font AGaramondAlt-Italic, that is an AFM and a PFB file
+% which should be renamed as padri8w.afm and padri8w.pfb.
+%
+% You should process the file Makepadl.tex (see below) through TeX,
+% and follow the instructions of the fontinst manual to finish the install.
+% The file T1padl.fd should be defined as below and put with other local FD files.
+
+%%% File Makepadl.tex
+\input fontinst.sty
+\installfonts
+ \declareencoding{T1-SWASH}{T1}
+ \fromafm{padri8w} %%% File containing metrics of AGaramondAlt-Italic
+ \gdef\uc#1#2{#1swash}
+ \installfont{padw9w}{padri8w}{T1}{T1}{padl}{m}{n}{}
+\endinstallfonts
+\bye
+%%% End of file Makepadl.tex
+
+% The padl family is defined by the file T1padl.fd, as follows
+
+%%% File T1padl.fd
+%THIS FILE SHOULD BE PUT IN A TEX INPUTS DIRECTORY
+\ProvidesFile{t1padl.fd}[2003/08/24 v0.1 Pascal Kockaert]
+\DeclareFontFamily{T1}{padl}{}
+\DeclareFontShape{T1}{padl}{m}{n}{<->padw9w}{}
+\endinput
+%%% End of file T1padl.fd