diff options
| -rw-r--r-- | Master/texmf-dist/doc/latex/siggraph/README | 78 | ||||
| -rw-r--r-- | Master/texmf-dist/source/latex/siggraph/siggraph.dtx | 1289 | ||||
| -rw-r--r-- | Master/texmf-dist/source/latex/siggraph/siggraph.ins | 4 | ||||
| -rw-r--r-- | Master/texmf-dist/tex/latex/siggraph/siggraph.cls | 435 | ||||
| -rwxr-xr-x | Master/tlpkg/bin/tlpkg-ctan-check | 2 | ||||
| -rwxr-xr-x | Master/tlpkg/libexec/ctan2tds | 1 | ||||
| -rw-r--r-- | Master/tlpkg/tlpsrc/collection-publishers.tlpsrc | 1 | ||||
| -rw-r--r-- | Master/tlpkg/tlpsrc/siggraph.tlpsrc | 0 |
8 files changed, 2 insertions, 1808 deletions
diff --git a/Master/texmf-dist/doc/latex/siggraph/README b/Master/texmf-dist/doc/latex/siggraph/README deleted file mode 100644 index 4f0b572ee32..00000000000 --- a/Master/texmf-dist/doc/latex/siggraph/README +++ /dev/null @@ -1,78 +0,0 @@ -SIGGRAPH class, version 1.1.1, January 17, 1996 -Written by Daniel Kartch - Program of Computer Graphics - Cornell University - dan@graphics.cornell.edu - -The latest version of these files can be found at - http://www.graphics.cornell.edu/~dan/texstuff/siggraph/ - -This distribution provides a document class for formatting papers -according to the specifications for submission to the annual -ACM Siggraph conference. It contains three files: - -README - this file -siggraph.dtx - documented source code -siggraph.ins - installation driver - -To install it, type - latex siggraph.ins -Then place the resulting siggraph.cls file somewhere where TeX can find it. - -To generate the user's guide, type - latex siggraph.dtx - makeindex -s gglo.ist -o siggraph.gls siggraph.glo - (If you don't have the makeindex program, you may skip this step. - The user's guide will be produced without the Change History.) - latex siggraph.dtx - -This package is distributed in the hope that it will be useful, -and to promote compatibility of documents created at different sites, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. -Please see the siggraph.dtx file for copyright and distribution information. - -============================================================================= - -CHANGE HISTORY: - -v1.1.1 Changed copyright space to 1.5 inches. - -v1.1.0 Added \keywords and \estpages commands. - Disabled \passport command. - Changed \acmcategory/\acmformat commands to \category/\format. - -v1.0.0 Added preprint option. - Changed \acmpassport command to \passport. - -v0.9.0 Added \teaser command to allow pictures placed between the - title block and the start of the text. - Added \titlespace and \teaserspace to control spacing - between title block, teaser, and text. - -v0.8.3 Added \sectionfont command. - Added singlespace and doublespace options - Lots of internal changes in implementation - -v0.8.1 Made copyright space 1 inch - -v0.8.0 I really hated having to use the \acmopening command to - instead of \maketitle and the abstract environment in order - to get the abstract to appear on both the cover page and - in the paper. I finally figured out how to modify the - abstract environment to store its contents for use on - the cover page, so the \acmopening command has now - been eliminated. - -v0.7.0 Added `widereview' option for one-column, double-spaced, - 12-point review papers - -v0.6.3 Fixed one-column mode - Put page numbers back in for review papers - -v0.6.2 Fixed missing affiliation in title block - -v0.6.1 Made titles bold - Minor corrections in user's guide - - diff --git a/Master/texmf-dist/source/latex/siggraph/siggraph.dtx b/Master/texmf-dist/source/latex/siggraph/siggraph.dtx deleted file mode 100644 index 0596c3a3e14..00000000000 --- a/Master/texmf-dist/source/latex/siggraph/siggraph.dtx +++ /dev/null @@ -1,1289 +0,0 @@ -% \iffalse meta-comment -% -% file: siggraph.dtx -% version: 1.1.1 -% date: January 17, 1996 -% -% Provides `siggraph' document class for use with LaTeX2e. -% Formats a document according to ACM Siggraph conference proceedings -% specifications. -% -%% -%% Copyright (C) 1996 Daniel Kartch -%% Program of Computer Graphics -%% Cornell University -%% dan@graphics.cornell.edu -%% -%% This file is distributed in the hope that it will be useful, -%% but WITHOUT ANY WARRANTY; without even the implied warranty of -%% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. -%% -% -% This file may be freely copied in whole or in part under the following -% conditions: -% 1) Unmodified copies may be freely distributed separately or as part -% of larger packages. -% 2) You may make modified copies of this file for you own personal use, -% but you may not distribute modified copies. You may place modifications -% in a siggraph.cfg file (see the documentation), and distribute that -% file individually or along with this source. However, if you do -% so, the .cfg file must contain code to issue a warning when it is -% invoked by LaTeX that states: -% a) The fact that it is being loaded and it is not part of the -% standard distribution -% b) What it does (briefly) -% c) That it can be disabled by removing or renaming the .cfg file -% 3) Excerpts from this file may be freely used and distributed as part -% of other macro packages. -% -% Portions of this file (namely the \@maketitle macro and the commands to -% set up 9pt type) are modified versions of those provided with the standard -% LaTeX files article.cls file and size10.clo, and their distribution may -% be further restricted by the LaTeX copyright. (Probably not, but better -% safe than sorry.) -% -%% -%% NOTE: -%% This is a beta release and hasn't been thoroughly tested yet. Please -%% send me any bug reports, suggestions for improvement, or other comments. -%% I will do my best to fix any problems before the Siggraph submission -%% deadline, but I make no promises. The likelihood of my responding to -%% any given comment is directly proportional to the amount of time before -%% the deadline that the comment is received. -%% -% \fi -% -% \CheckSum{814} -%% \CharacterTable -%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z -%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z -%% Digits \0\1\2\3\4\5\6\7\8\9 -%% Exclamation \! Double quote \" Hash (number) \# -%% Dollar \$ Percent \% Ampersand \& -%% Acute accent \' Left paren \( Right paren \) -%% Asterisk \* Plus \+ Comma \, -%% Minus \- Point \. Solidus \/ -%% Colon \: Semicolon \; Less than \< -%% Equals \= Greater than \> Question mark \? -%% Commercial at \@ Left bracket \[ Backslash \\ -%% Right bracket \] Circumflex \^ Underscore \_ -%% Grave accent \` Left brace \{ Vertical bar \| -%% Right brace \} Tilde \~} -%% -% -% \iffalse -% \begin{macrocode} -%<+class>\NeedsTeXFormat{LaTeX2e}[1994/06/01] -%<+class>\ProvidesClass{siggraph} -%<*driver> - \ProvidesFile{siggraph.drv} -%</driver> - [1996/01/17 v1.1.1 -%<+class> Siggraph proceedings document class] -%<*driver> -] -%</driver> -% \end{macrocode} -% -% \section{Driver for this document} -% -% The following contains the driver for generating this document. -% It can be extracted from the |.dtx| file with the \dst{} program. -% -% \begin{macrocode} -%<*driver> -\documentclass{ltxdoc} -\GetFileInfo{siggraph.drv} -%\DisableCrossrefs -\RecordChanges -\OnlyDescription % comment out for full source description -\begin{document} - \DocInput{siggraph.dtx} -\end{document} -%</driver> -% \end{macrocode} -%\fi -% -% \newenvironment{mylist}{% -% \begin{list}{\labelitemi}{% -% \addtolength{\leftmargin}{2em}% -% \setlength{\itemindent}{-1em}% -% \setlength{\parsep}{0in}% -% \setlength{\itemsep}{0.5ex}}}{\end{list}} -% -% \changes{v0.6.1}{1994/12/26}{Minor modifications to user's guide} -% -% \title{The |siggraph| Document Class Users' Guide\thanks{ -% This file has version number \fileversion{} dated \filedate{}. -% The most recent version can be found at -% {\ttfamily http://www.graphics.cornell.edu/\~{}dan/texstuff/siggraph/}}} -% -% \author{Daniel Kartch\thanks{dan@graphics.cornell.edu}} -% -% \date{\filedate} -% -% \maketitle -% -% \begin{abstract} -% This document class modifies the standard |article| class to conform to -% the specifications for papers published in the proceedings of the annual -% ACM Siggraph conference. -% It sets all the necessary layout parameters and handles the differences -% in format between a paper being submitted for blind review and a camera -% ready copy of an accepted paper. -% Several additional features are also provided. -% -% \vspace{\baselineskip} -% \begin{quote} -% DISCLAIMER: This class is distributed in the hope that it will be useful, -% and to promote compatibility of documents created at different sites. -% However it is provided WITHOUT ANY WARRANTY; without even the implied -% warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. -% Please see the |siggraph.dtx| source file for copyright and distribution -% information. -% \end{quote} -% \end{abstract} -% -% \section{Introduction} -% -% This document describes the |siggraph| document class, for use with \LaTeXe{}. -% It is intended as a replacement for the various versions of the old -% |siggraph.sty| file that have been floating around for years. -% It loads in the |article| class and modifies several parameters -% to comply with the layout specifications for a paper submitted to -% the ACM Siggraph conference. -% Currently, these specifications are: -% \begin{mylist} -% \label{layoutlist} -% \item $\frac{3}{4}$ inch margins on top and sides, 1 inch margin on bottom -% \item two column mode with 2 pica column separation -% \item space for copyright is 1.5 inch -% \changes{v0.8.1}{1995/03/22}{Made copyright space 1 inch} -% \changes{v1.1.1}{1996/01/17}{Made copyright space 1.5 inch} -% \item 9 point type on 10 point baselines -% \item no page numbers -% \changes{v0.6.3}{1995/01/06}{Put page numbers back in for review option} -% \end{mylist} -% Also set by the class but not part of the siggraph specifications are: -% \begin{mylist} -% \changes{v0.6.1}{1994/12/26}{Made titles bold} -% \item titles and section headings are bold sans serif -% \item 1 em paragraph indentation -% \item |flushbottom| mode -% \end{mylist} -% -% The class also allows the user to specify whether the paper is being -% submitted for blind review or as a final, camera-ready document. -% When review mode is specified, it will automatically generate a -% cover sheet for the paper, modify the title block on the first page -% to protect anonymity, and (optionally) switch to a more widely spaced -% layout. -% Mechanisms are also provided to allow the user to introduce text conditional -% on the chosen submission mode. -% -% \section{Usage} -% -% To use this class, specify -% \begin{verbatim} \documentclass{siggraph} \end{verbatim} -% at the beginning of your document. -% The following options may be included in the |\documentclass| command: -% -% \begin{mylist} -% \item \DescribeMacro{cameraready}|cameraready|, -% \DescribeMacro{preprint}|preprint|, -% \DescribeMacro{review}|review|, or -% \DescribeMacro{widereview}|widereview| -% \changes{v0.7.0}{1995/01/23}{Added widereview option} -% \changes{v1.0.0}{1995/12/18}{Added preprint option} -% \newline These specify the submission mode for the paper. -% |cameraready|, the default, sets the layout parameters as -% described in section~\ref{layoutlist}. -% The |preprint| option adds page numbers and prints the message -% ``To appear in the SIGGRAPH conference proceedings'' in the top -% margin. This message can be changed with the -% \DescribeMacro{\preprinttext}|\preprinttext{|\meta{message}|}| -% command. -% The |review| option uses the same layout as |cameraready| but -% adds page numbers and modifies the title block as described -% in the next section. -% The |widereview| option is for people who prefer review papers -% that have a more widely spaced layout. -% It uses one-column mode with 12 point, double-spaced type. -% Other effects of these options will be described later. -% -% \item \DescribeMacro{onecolumn}|onecolumn| or -% \DescribeMacro{twocolumn}|twocolumn| -% \changes{v0.6.3}{1995/01/09}{Fixed onecolumn option} -% \item \DescribeMacro{singlespace}|singlespace| or -% \DescribeMacro{doublespace}|doublespace| -% \changes{v0.8.3}{1995/03/27}{Added singlespace and doublespace options} -% \item \DescribeMacro{9pt}|9pt|, -% \DescribeMacro{10pt}|10pt|, -% \DescribeMacro{11pt}|11pt|, or -% \DescribeMacro{12pt}|12pt| -% \newline These three sets of options will override the default -% settings for the number of columns, line spacing, and point size -% determined by the submission mode. -% Overriding the settings when in camera-ready mode, while allowed, -% is a violation of the submission specifications and will produce -% a warning message. -% -% \item \DescribeMacro{version1996}|version1996| or -% \DescribeMacro{version1994}|version1994| -% \newline The submission specifications can change from year to -% year, and I will try to keep this class updated to match them. -% However, since many papers are painstakingly typeset to fit -% the allotted pages exactly, small changes in the format can -% radically change their appearance. This class therefore includes -% a specification date to allow old documents to maintain their -% appearance even if the specs change. Although the most recent -% version is always the default, I recommend including it in the -% options list anyways, so that you won't have to think about -% it several years down the road. -% (The only difference between the 94 and 96 versions is that -% the space for the copyright is now a half inch larger.) -% -% \item Additionally, any other options supported by the |article| class -% may be used, except for |landscape| and |titlepage|, which are -% disabled. -% \end{mylist} -% -% -% \section{Title Block, Abstract, and Cover Page} -% -% \subsection{Data fields} -% -% In addition to the |\title| and |\author| commands provided by the |article| -% class, several other pieces of information can be set. -% Each of these commands takes a single argument, the value to which the -% corresponding field should be set. -% \begin{mylist} -% \item \DescribeMacro{\affiliation}|\affiliation| -% -% If all the authors share an affiliation, it can be set with this -% command rather than individually within the author command. -% The affiliation will appear centered below the author list. -% -% \item \DescribeMacro{\category}|\category| and -% \DescribeMacro{\format}|\format| -% \changes{v1.1.0}{1996/01/08}{Replaced acmcategory/acmformat with -% category/format. Old versions still enabled.} -% -% The paper category (research, systems, ...) and format (print, video). -% -% \item \DescribeMacro{\contactname}|\contactname|, -% \DescribeMacro{\contactaddress}|\contactaddress|, -% \DescribeMacro{\contactphone}|\contactphone|, -% \DescribeMacro{\contactfax}|\contactfax|, -% \DescribeMacro{\contactemail}|\contactemail| -% -% These should be used to set the information about the person to -% be contacted about the paper. -% -% \item \DescribeMacro{\passport}|\passport| -% \changes{v1.0.0}{1995/12/18}{Replaced acmpassport with passport. -% Old version still enabled.} -% \changes{v1.1.0}{1996/01/08}{Disabled passport command; no longer required.} -% -% The author who will receive compensation if the paper is accepted. -% \emph{As of 1996, this is no longer requested when submitting papers -% for review and the command has been disabled.} -% -% \item \DescribeMacro{\keywords}|\keywords| -% \changes{v1.1.0}{1996/01/08}{Added keywords command} -% -% A list of keywords to be printed on the cover page -% -% \item \DescribeMacro{\estpages}|\estpages| -% \changes{v1.1.0}{1996/01/08}{Added estpages command} -% -% The estimated number of pages that the paper would require in the -% conference proceedings. -% -% \end{mylist} -% -% \subsection{Title block} -% -% The title block is generated with the normal \LaTeX{} -% \DescribeMacro{\maketitle}|\maketitle| command. -% For a camera ready document it will contain: -% \begin{mylist} -% \item Title -% \item Authors -% \item Affiliation (if any) -% \changes{v0.6.2}{1995/01/05}{Fixed missing affiliation in title block} -% \end{mylist} -% -% For a review paper it will instead contain: -% \begin{mylist} -% \item Title -% \item Paper category -% \end{mylist} -% \changes{v1.1.0}{1996/01/08}{Removed paper format from first page of paper.} -% The review options will also suppress printing of any information -% specified with the |\thanks| command. -% -% \changes{v0.9.0}{1994/04/20}{Added teaser} -% Some authors like to include a pretty picture of their results between -% the title block and the start of the text to act as a teaser. -% Because of the way \LaTeX's float placement scheme works, this seemingly -% simple task is apparently impossible to do in a two column document -% without making the picture part of the |\maketitle| command. -% Therefore, that's exactly what I've done. -% The class provides a \DescribeMacro{\teaser}|\teaser{|\meta{figure}|}| -% command, whose contents will appear as a figure centered below the -% title block. -% Theoretically, anything that can appear in a |figure| environment can -% appear here. -% However, the current implementation is a bit of a kludge, so some things -% might not work. -% I've already been told that it isn't compatible with the |float| package. -% I'll see what I can do to improve it when I get the chance. -% -% \changes{v0.9.0}{1994/04/20}{Added \cmd{\titlespace} and \cmd{\teaserspace}} -% The space between the title block text and the rest of the document, and -% between the teaser (if any) and the start of the main text are controlled -% by the length parameters \DescribeMacro{\titlespace}|\titlespace| and -% \DescribeMacro{\teaserspace}|\teaserspace|. -% They both default to $\frac{1}{4}$ inch, but can be changed with the -% normal \LaTeX{} length setting commands. -% -% \subsection{Abstract} -% -% The abstract should be specified with the |abstract| environment. -% In addition to appearing in the paper itself, its contents will stored -% and will appear on the cover page (in review mode). -% -% \subsection{Cover page} -% -% When the |review| or |widereview| option is specified, -% a cover sheet will automatically be generated at the end of the document. -% Placing the \DescribeMacro{\suppresscover}|\suppresscover| command -% in the preamble will prevent this. -% The cover sheet will contain: -% \begin{mylist} -% \item Title -% \item Authors -% \item Affiliation (if any) -% \item Paper category -% \item Contact information -% \item A copy of the abstract -% \item List of keywords -% \item Estimated number of pages -% \end{mylist} -% -% \subsection{Obsolete command} -% -% In previous versions of this class, it was necessary to use a command -% called \DescribeMacro{\acmopening}|\acmopening| in place of the -% |\maketitle| command and -% \changes{v0.8.0}{1995/03/07}{Eliminated \cmd{\acmopening} command} -% |abstract| environment in order to get the abstract to appear on the -% cover page as well as in the text. -% This is no longer necessary, and users should switch back to -% the normal commands. -% -% -% \section{Other Features} -% -% \subsection{Copyright notice} -% -% As with the old |siggraph.sty|, this class provides a -% \DescribeMacro{\copyrightspace}|\copyrightspace| -% command to leave space at the bottom of the first column for the copyright -% notice. -% This command should be placed after the last footnote that will appear in -% the first column. -% As of yet, there is no way to have this done automatically, but I am looking -% into it. -% -% \subsection{Title and section heading font} -% -% By default, this class uses bold sans-serif for the title and -% section heading font. -% This behavior can be altered with the -% \DescribeMacro{\sectionfont}|\sectionfont{|\meta{fontcommands}|}| command. -% \changes{v0.8.3}{1995/03/27}{Added \cmd{\sectionfont} command} -% \meta{fontcommands} should be one or more font changing commands, -% for instance ``|\rmfamily\scshape|'' or ``|\fontfamily{pcr}\selectfont|''. -% -% \subsection{Conditional text} -% -% \DescribeMacro{\ifcamera}\DescribeMacro{\ifreview} -% \DescribeMacro{\ifcameraelse}\DescribeMacro{\ifreviewelse} -% The class also provides the following four commands for writing text -% conditional on whether camera-ready or review mode has been -% chosen: -% \begin{quote} -% |\ifcamera{|\meta{thenclause}|}| -% -% |\ifreview{|\meta{thenclause}|}| -% -% |\ifcameraelse{|\meta{thenclause}|}{|\meta{elseclause}|}| -% -% |\ifreviewelse{|\meta{thenclause}|}{|\meta{elseclause}|}| -% \end{quote} -% The first two will generate the \meta{thenclause} if camera-ready -% (resp. review) mode is chosen, otherwise they resolve to a null string. -% The second two are the same as the first two but generate the -% \meta{elseclause} instead of a null string if the condition is not met. -% -% These can be used for writing the paper so as to protect anonymity for -% a submission for review, without having to worry about going back over it -% months later to put the identifying information back in if the paper -% is accepted. For example: -% \begin{quote}^^A -% |In \cite{FooBar1994}, \ifcameraelse{we}{Foo and Bar} showed that ...| -% \end{quote} -% or -% \begin{quote}^^A -% |as illustrated in the following \ifcameraelse{three}{two} images:| -% -% [include generic image] -% -% |\ifcamera{| [include our logo] |}| -% -% [include another generic image] -% \end{quote} -% -% \subsection{Configuration file} -% -% Individual users or sites may wish to modify the behavior of this -% class (for instance, to use a particular set of fonts.) -% Rather than having people hack the |.cls| file, which can lead to -% various incompatible versions at different sites, the class provides -% for a configuration file. -% After the class has finished loading, it will check to see if a -% |siggraph.cfg| file exists in the \TeX{} search path. -% If so, it will be input. -% Any user-- or site--specific modifications should be placed in this file. -% \textit{(See the copyright notice in the |siggraph.dtx| source file for -% information on distribution of configuration files.)} -% -% \StopEventually{\PrintChanges} -% -% \iffalse -%<*class> -% \fi -% -% \section{Implementation} -% -% \begin{quote} -% Warning: The implementation is a work in progress and may undergo radical -% alterations before the first non-beta release. Do not count on any of -% the internal representations remaining the same. Any suggestions for -% improving any aspects of the implementation are welcome. -% \end{quote} -% -% \subsection{Initial stuff} -% -% \begin{macro}{\ifacm@camera} -% \begin{macro}{\acm@columnmode} -% \begin{macro}{\acm@pointsize} -% \begin{macro}{\ifacm@doublespaced} -% First off, we need to initialize a few variables. -% |acm@camera| is a boolean which determines whether or not we're in -% camera ready mode. -% |\acm@preprint|, |\acm@columnmode|, |\acm@pointsize| -% and |acm@doublespaced| are pretty obvious. -% \begin{macrocode} -\newif\ifacm@camera -\newif\ifacm@preprint -\newcommand{\acm@columnmode}{} -\newcommand{\acm@pointsize}{} -\newif\ifacm@doublespaced -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \subsection{Option processing} -% -% \subsubsection{Submission mode} -% -% \begin{macro}{cameraready} -% \begin{macro}{preprint} -% \begin{macro}{review} -% \begin{macro}{widereview} -% The |cameraready|, |preprint|, |review|, and |widereview| options set the -% variables defined above appropriately. -% \begin{macrocode} -\DeclareOption{cameraready}{% - \acm@cameratrue% - \acm@preprintfalse% - \renewcommand{\acm@columnmode}{twocolumn}% - \acm@doublespacedfalse% - \renewcommand{\acm@pointsize}{9pt}} -\DeclareOption{review}{% - \acm@camerafalse% - \renewcommand{\acm@columnmode}{twocolumn}% - \acm@doublespacedfalse% - \renewcommand{\acm@pointsize}{9pt}} -\DeclareOption{widereview}{% - \acm@camerafalse% - \renewcommand{\acm@columnmode}{onecolumn}% - \acm@doublespacedtrue% - \renewcommand{\acm@pointsize}{12pt}} -\DeclareOption{preprint}{% - \acm@preprinttrue} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% By default, |cameraready| mode should be used. -% \begin{macrocode} -\ExecuteOptions{cameraready} -% \end{macrocode} -% -% \subsubsection{Layout parameters} -% -% \begin{macro}{\acm@optwarning} -% The |\acm@optwarning| command produces a warning message when one -% tries to override the default layout parameters while in camera-ready -% mode. -% \begin{macrocode} -\newcommand{\acm@optwarning}[1]{% - \ifacm@camera - \ClassWarningNoLine{siggraph}% - {#1 option used in camera-ready mode.\MessageBreak - This violates submission specifications} - \fi -} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{onecolumn} -% \begin{macro}{twocolumn} -% \begin{macro}{9pt} -% \begin{macro}{10pt} -% \begin{macro}{11pt} -% \begin{macro}{12pt} -% \begin{macro}{doublespace} -% \begin{macro}{singlespace} -% The various layout parameters can be set individually, overriding the -% values set by the specified submission mode. -% \begin{macrocode} -\DeclareOption{onecolumn}{% - \acm@optwarning{onecolumn} - \renewcommand{\acm@columnmode}{onecolumn}} -\DeclareOption{twocolumn}{% - \renewcommand{\acm@columnmode}{twocolumn}} -\DeclareOption{9pt}{% - \renewcommand{\acm@pointsize}{9pt}} -\DeclareOption{10pt}{% - \acm@optwarning{10pt} - \renewcommand{\acm@pointsize}{10pt}} -\DeclareOption{11pt}{% - \acm@optwarning{11pt} - \renewcommand{\acm@pointsize}{11pt}} -\DeclareOption{12pt}{% - \acm@optwarning{12pt} - \renewcommand{\acm@pointsize}{12pt}} -\DeclareOption{singlespace}{% - \acm@doublespacedfalse} -\DeclareOption{doublespace}{% - \acm@optwarning{doublespace} - \acm@doublespacedtrue} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \subsubsection{Version} -% -% \begin{macro}{\acm@specversion} -% \begin{macro}{version1994} -% \begin{macro}{version1996} -% Set the version number. -% \begin{macrocode} -\newcount\acm@specversion -\DeclareOption{version1996}{\acm@specversion=1996} -\DeclareOption{version1994}{\acm@specversion=1994} -\ExecuteOptions{version1996} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \subsubsection{Remaining options} -% -% Disable the |titlepage| and |landscape| options, and pass any remaining -% options on to the |article| class. -% -% \begin{macrocode} -\DeclareOption{titlepage}{% - \OptionNotUsed% - \ClassWarningNoLine{siggraph}{titlepage option not allowed}} -\DeclareOption{landscape}{% - \OptionNotUsed% - \ClassWarningNoLine{siggraph}{landscape option not allowed}} -\DeclareOption*{\PassOptionsToClass{\CurrentOption}{article}} -% \end{macrocode} -% -% \subsubsection{Option processing} -% -% Process the options, cause the appropriate column and point size options -% to be passed to the |article| class, and load the |article| class. -% -% \begin{macrocode} -\ProcessOptions -\PassOptionsToClass{\acm@columnmode}{article} -\ifdim\acm@pointsize>9pt - \PassOptionsToClass{\acm@pointsize}{article} -\fi -\LoadClass{article} -% \end{macrocode} -% -% \subsection{Conditional text} -% \begin{macro}{\preprinttext} -% Set up default message for preprints and command to change it. -% \begin{macrocode} -\newcommand{\acm@preprinttext}{To appear in the SIGGRAPH conference proceedings} -\newcommand{\preprinttext}[1]{\renewcommand{\acm@preprinttext}{#1}} -% \end{macrocode} -% \end{macro} -% -% -% \subsection{Conditional text} -% -% \begin{macro}{\ifcamera} -% \begin{macro}{\ifreview} -% \begin{macro}{\ifcameraelse} -% \begin{macro}{\ifreviewelse} -% Here we define the commands to include text conditionally, based on -% the submission mode. -% \begin{macrocode} -\newcommand{\ifcamera}[1]{\ifacm@camera #1 \fi} -\newcommand{\ifreview}[1]{\ifacm@camera \else #1 \fi} -\newcommand{\ifcameraelse}[2]{\ifacm@camera #1 \else #2 \fi} -\newcommand{\ifreviewelse}[2]{\ifacm@camera #2 \else #1 \fi} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \subsection{Page layout} -% -% Set the margins, header and footer sizes, column separation, and indentation. -% -% \begin{macrocode} -\setlength{\textheight}{9.25in} -\setlength{\topmargin}{-0.700in} -\setlength{\headheight}{0.2in} -\setlength{\headsep}{0.250in} -\setlength{\footskip}{0.5in} -\flushbottom -\setlength{\textwidth}{7in} -\setlength{\oddsidemargin}{-0.25in} -\setlength{\evensidemargin}{-0.25in} -\setlength{\columnsep}{2pc} -\setlength{\parindent}{1em} -% \end{macrocode} -% -% Modify plain and empty page styles to turn off page numbering or turn on -% preprint message. -% -% \begin{macrocode} -\renewcommand{\ps@plain}% - {% - \ifacm@preprint% - \renewcommand{\@oddhead}{\hfil\textit{\large\acm@preprinttext}\hfil}% - \else% - \renewcommand{\@oddhead}{}% - \fi% - \ifacm@camera% - \ifacm@preprint% - \renewcommand{\@oddfoot}{\hfil\textrm{\thepage}\hfil}% - \else% - \renewcommand{\@oddfoot}{}% - \fi% - \else% - \renewcommand{\@oddfoot}{\hfil\textrm{\thepage}\hfil}% - \fi% - \renewcommand{\@evenhead}{\@oddhead}% - \renewcommand{\@evenfoot}{\@oddfoot}% - } -\renewcommand{\ps@empty}% - {% - \ifacm@preprint% - \renewcommand{\@oddhead}{\hfil\textit{\large\acm@preprinttext}\hfil}% - \else% - \renewcommand{\@oddhead}{}% - \fi% - \renewcommand{\@oddfoot}{}% - \renewcommand{\@evenhead}{\@oddhead}% - \renewcommand{\@evenfoot}{\@oddfoot}% - } -\pagestyle{plain} -% \end{macrocode} -% -% \subsection{Setting up 9pt point type} -% -% The code in this section is a modified version of that found in the -% |size10.clo| file from the June 1994 \LaTeX{} distribution, with values -% taken from the old |siggraph.sty| file. -% -% \begin{macro}{\acm@setninepoint} -% The |\acm@setninepoint| command sets the type size to 9pt. -% \begin{macrocode} -\newcommand{\acm@setninepoint}{ -% \end{macrocode} -% -% Redefine |\normalsize| to 9 points. -% -% \begin{macrocode} - \renewcommand\normalsize{% - \@setfontsize\normalsize\@ixpt\@xpt - \abovedisplayskip 9\p@ \@plus2\p@ \@minus4\p@ - \abovedisplayshortskip \z@ \@plus3\p@ - \belowdisplayshortskip 6\p@ \@plus3\p@ \@minus3\p@ - \belowdisplayskip \abovedisplayskip - \let\@listi\@listI} -% \end{macrocode} -% -% Redefine |\small| to 8 points. -% -% \begin{macrocode} - \renewcommand\small{% - \@setfontsize\small\@viipt\@ixpt - \abovedisplayskip 8.5\p@ \@plus3\p@ \@minus4\p@ - \abovedisplayshortskip \z@ \@plus2\p@ - \belowdisplayshortskip 4\p@ \@plus2\p@ \@minus2\p@ - \def\@listi{\leftmargin\leftmargini - \topsep 4\p@ \@plus2\p@ \@minus2\p@ - \parsep 2\p@ \@plus\p@ \@minus\p@ - \itemsep \parsep}% - \belowdisplayskip \abovedisplayskip} -% \end{macrocode} -% -% |\footnotesize|, |\scriptsize|, and |\tiny| remain the same as for -% 10 point documents. -% -% \begin{macrocode} - \renewcommand\footnotesize{% - \@setfontsize\footnotesize\@viiipt{9.5}% - \abovedisplayskip 6\p@ \@plus2\p@ \@minus4\p@ - \abovedisplayshortskip \z@ \@plus\p@ - \belowdisplayshortskip 3\p@ \@plus\p@ \@minus2\p@ - \def\@listi{\leftmargin\leftmargini - \topsep 3\p@ \@plus\p@ \@minus\p@ - \parsep 2\p@ \@plus\p@ \@minus\p@ - \itemsep \parsep}% - \belowdisplayskip \abovedisplayskip} - \renewcommand\scriptsize{\@setfontsize\scriptsize\@viipt\@viiipt} - \renewcommand\tiny{\@setfontsize\tiny\@vpt\@vipt} -% \end{macrocode} -% -% All the larger than normal sizes get decremented one step from their -% values in 10 point documents. -% -% \begin{macrocode} - \renewcommand\large{\@setfontsize\large\@xpt\@xiipt} - \renewcommand\Large{\@setfontsize\Large\@xiipt{14}} - \renewcommand\LARGE{\@setfontsize\LARGE\@xivpt{18}} - \renewcommand\huge{\@setfontsize\huge\@xviipt{22}} - \renewcommand\Huge{\@setfontsize\Huge\@xxpt{25}} -% \end{macrocode} -% -% To make sure the size changes are loaded immediately, we call |\selectfont|. -% \begin{macrocode} - \selectfont -} -% \end{macrocode} -% \end{macro} -% -% If not overridden, set type size to 9 points. -% -% \begin{macrocode} -\ifdim\acm@pointsize=9pt - \acm@setninepoint -\fi -% \end{macrocode} -% -% \subsection{Section headings} -% -% \begin{macro}{\sectionfont} -% The |\sectionfont| command lets the user modify the font used for -% section headings and the title. -% \begin{macrocode} -\newcommand{\acm@sectionfont}{} -\newcommand{\sectionfont}[1]{\renewcommand{\acm@sectionfont}{#1}} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\section} -% \begin{macro}{\subsection} -% \begin{macro}{\subsubsection} -% \begin{macro}{\paragraph} -% \begin{macro}{\subparagraph} -% We redefine the section headings to use bold sans serif type plus -% any modifications set with |\sectionfont|. (Otherwise -% these are the same definitions given in the |classes.dtx| file.) -% \begin{macrocode} -\renewcommand\section{\@startsection {section}{1}{\z@}% - {-3.5ex \@plus -1ex \@minus -.2ex}% - {2.3ex \@plus.2ex}% - {\reset@font\Large\sffamily\bfseries\acm@sectionfont}} -\renewcommand\subsection{\@startsection{subsection}{2}{\z@}% - {-3.25ex\@plus -1ex \@minus -.2ex}% - {1.5ex \@plus .2ex}% - {\reset@font\large\sffamily\bfseries\acm@sectionfont}} -\renewcommand\subsubsection{\@startsection{subsubsection}{3}{\z@}% - {-3.25ex\@plus -1ex \@minus -.2ex}% - {1.5ex \@plus .2ex}% - {\reset@font\normalsize\sffamily\bfseries\acm@sectionfont}} -\renewcommand\paragraph{\@startsection{paragraph}{4}{\z@}% - {3.25ex \@plus1ex \@minus.2ex}% - {-1em}% - {\reset@font\normalsize\sffamily\bfseries\acm@sectionfont}} -\renewcommand\subparagraph{\@startsection{subparagraph}{5}{\parindent}% - {3.25ex \@plus1ex \@minus .2ex}% - {-1em}% - {\reset@font\normalsize\sffamily\bfseries\acm@sectionfont}} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% -% -% \subsection{Title block} -% -% \begin{macro}{\acm@empty} -% This is used to check whether the affiliation and teaser have been set. -% \begin{macrocode} -\newcommand{\acm@empty}{} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\affiliation} -% \begin{macro}{\acm@affiliation} -% We define the |\affiliation| macro to set the authors' affiliation, -% and the |\acm@affiliation| macro to hold it. -% \begin{macrocode} -\newcommand{\acm@affiliation}{} -\newcommand{\affiliation}[1]{\renewcommand{\acm@affiliation}{#1}} -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\category} -% \begin{macro}{\acm@category} -% \begin{macro}{\format} -% \begin{macro}{\acm@format} -% These macros set and hold the paper's category and format. -% \begin{macrocode} -\newcommand{\acm@category}{} -\newcommand{\category}[1]{\renewcommand{\acm@category}{#1}} -\newcommand{\acmcategory}[1]{\category{#1}} -\newcommand{\acm@format}{} -\newcommand{\format}[1]{\renewcommand{\acm@format}{#1}} -\newcommand{\acmformat}[1]{\format{#1}} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\teaser} -% \begin{macro}{\acm@teaser} -% These macros hold the teaser (if any). -% \begin{macrocode} -\newcommand{\acm@teaser}{} -\newcommand{\teaser}[1]{\renewcommand{\acm@teaser}{#1}} -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\titlespace} -% \begin{macro}{\teaserspace} -% We also need to set up lengths for the distance between the title block -% and teaser from the rest of the text. We initialize them to -% $\frac{1}{4}$ inches. -% \begin{macrocode} -\newlength{\titlespace} -\setlength{\titlespace}{0.25in} -\newlength{\teaserspace} -\setlength{\teaserspace}{0.25in} -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\@maketitle} -% Now we redefine the \@maketitle command to properly format the title block. -% For camera-ready papers, it should have the title, authors, and affiliation. -% For review papers, it should have the title, paper category and format, -% plus all information specified with the |\thanks| command should be -% suppressed. -% \begin{macrocode} -\ifacm@camera - \renewcommand{\@maketitle}{% - \begin{center}% - {\LARGE\sffamily\bfseries\acm@sectionfont \@title \par}% - \vspace{1\baselineskip}% - \large - \begin{tabular}[t]{c}% - \@author - \end{tabular}\par% - \ifx\acm@affiliaton\acm@empty \else% - \vspace{1\baselineskip}% - \acm@affiliation\par% - \fi% - \vspace{\titlespace}% - \ifx\acm@teaser\acm@empty \else% - \begingroup% - \def\@captype{figure}% - \acm@teaser% - \endgroup\par% - \vspace{\teaserspace}% - \fi% - \end{center} \par% - } -\else - \renewcommand{\@maketitle}{% - \begin{center}% - \renewcommand{\thanks}[1]{} - {\LARGE\sffamily\bfseries\acm@sectionfont \@title \par}% - \vspace{1\baselineskip}% - {Category: \acm@category \par}% -% \vspace{0.25\baselineskip}% % no longer needed (1996) -% {Format: \acm@format \par}% % no longer needed (1996) - \vspace{\titlespace}% - \ifx\acm@teaser\acm@empty \else% - \begingroup% - \def\@captype{figure}% - \acm@teaser% - \endgroup\par% - \vspace{\teaserspace}% - \fi% - \end{center} \par% - } -\fi -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\maketitle} -% We also need to make several modifications to the |\maketitle| command. -% Since |\maketitle| wipes out the values of the title, author, etc\ldots, -% we have to make sure a copy gets saved. -% After the title block is output, -% the page numbering for the first page should be turned off, and -% double spacing, if selected, should be turned on. -% \begin{macrocode} -\let\acm@origmaketitle\maketitle -\renewcommand{\maketitle}{% - \let\acm@title\@title% - \let\acm@author\@author% - \acm@origmaketitle% - \thispagestyle{empty}% - \ifacm@doublespaced% - \renewcommand{\baselinestretch}{1.66}\selectfont% - \fi -} -% \end{macrocode} -% \end{macro} -% -% -% -% \subsection{Capturing the abstract} -% -% \begin{environment}{abstract} -% In order to have the abstract appear on the cover sheet, we need to -% redefine the |abstract| environment to store its contents so that -% the can be used later. -% This seemingly trivial problem is actually quite difficult. -% The code to do it is a modified version of the |\@collectbody| stuff -% from the AMS-\LaTeX{} source code. -% See that code for a more detailed explanation of how it works. -% -% \begin{macro}{\acm@abs} -% The |\acm@abs| token list is used to store the text of the abstract. -% \begin{macrocode} -\newtoks\acm@abs -% \end{macrocode} -% \end{macro} -% -% We only make these modifications if we are in review mode. -% \begin{macrocode} -\ifacm@camera\else -% \end{macrocode} -% -% \begin{macro}{\acm@add} -% The |\acm@add| command appends its argument to |\acm@abs|. -% \begin{macrocode} - \long\def\acm@add#1{\global\acm@abs\expandafter{\the\acm@abs#1}} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\acm@collect} -% \begin{macro}{\acm@@collect} -% The |\acm@collect| and |\acm@@collect| commands scan the input for the -% |\end{abstract}| command and place all input tokens leading up to it -% into |\acm@abs|. -% \begin{macrocode} - \long\def\acm@collect{% - \global\acm@abs{}% - \let\abstract\acm@@collect - \abstract - } - \long\def\acm@@collect#1\end#2{% - \def\@tempa{#2}% - \ifx\@tempa\@currenvir - \acm@add{#1}% - \edef\abstract{\noexpand\end{\@tempa}}% - \else - \acm@add{#1\end{#2}}% - \fi - \abstract - } -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\acm@modify} -% The |\acm@modify| command makes the actual modifications to the |abstract| -% environment. -% The new |abstract| stores its contents with the above macros, then -% outputs the abstract using its original definition. -% \begin{macrocode} - \newcommand{\acm@modify}{% - \let\acm@origabs\abstract% - \let\acm@origendabs\endabstract% - \renewenvironment{abstract}% - {\acm@collect}% - {\begingroup - \let\abstract\acm@origabs - \let\endabstract\acm@origendabs - \begin{abstract} \the\acm@abs \end{abstract} - \endgroup}% - } -% \end{macrocode} -% \end{macro} -% -% We want to allow the user to redefine the appearance of the |abstract| -% environment however he/she likes, so we hold off actually making the -% modifications to |abstract| until after the preamble. -% \begin{macrocode} - \AtBeginDocument{\acm@modify} -% \end{macrocode} -% -% End of review mode conditional: -% \begin{macrocode} -\fi -% \end{macrocode} -% \end{environment} -% -% -% -% \subsection{Copyright notice and footnote rule} -% -% \begin{macro}{\copyrightspace} -% The |\copyrightspace| macro creates an empty footnote tall enough -% for the copyright notice. -% \begin{macrocode} -\newlength{\acm@copyrightlength} -\ifnum\acm@specversion=1994 - \setlength{\acm@copyrightlength}{1in} -\else - \setlength{\acm@copyrightlength}{1.5in} -\fi -\newcommand{\copyrightspace}{% - \renewcommand{\thefootnote}{}% - \footnotetext[0]{\rule[\acm@copyrightlength]{2.71828in}{0in}}% - \renewcommand{\thefootnote}{\arabic{footnote}} -} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\footnoterule} -% I wanted a way to tell how many of the papers published in Siggraph -% are using my class, so I changed the size of the footnote rule from 40\% -% of the column width to 45\%. -% This doesn't make a noticable change in the paper's appearance, but -% can be quickly checked with a ruler. -% Thanks go to the devious little mind of Pete Shirley for suggesting -% this sneaky hack. -% \begin{macrocode} -\renewcommand{\footnoterule}{% - \kern-3pt - \hrule width 0.45\columnwidth - \kern 2.6pt} -% \end{macrocode} -% \end{macro} -% -% -% -% \subsection{Cover page} -% -% \begin{macro}{\contactname} -% \begin{macro}{\acm@contactname} -% \begin{macro}{\contactaddress} -% \begin{macro}{\acm@contactaddress} -% \begin{macro}{\contactphone} -% \begin{macro}{\acm@contactphone} -% \begin{macro}{\contactfax} -% \begin{macro}{\acm@contactfax} -% \begin{macro}{\contactemail} -% \begin{macro}{\acm@contactemail} -% \begin{macro}{\passport} -% \begin{macro}{\acm@passport} -% \begin{macro}{\acmpassport} -% \begin{macro}{\keywords} -% \begin{macro}{\acm@keywords} -% \begin{macro}{\estpages} -% \begin{macro}{\acm@estpages} -% We define macros to set and hold all the information about the person -% to be contacted about the paper and the author to receive compensation. -% \begin{macrocode} -\newcommand{\acm@contactname}{} -\newcommand{\contactname}[1]{\renewcommand{\acm@contactname}{#1}} -\newcommand{\acm@contactaddress}{} -\newcommand{\contactaddress}[1]{\renewcommand{\acm@contactaddress}{#1}} -\newcommand{\acm@contactphone}{} -\newcommand{\contactphone}[1]{\renewcommand{\acm@contactphone}{#1}} -\newcommand{\acm@contactfax}{} -\newcommand{\contactfax}[1]{\renewcommand{\acm@contactfax}{#1}} -\newcommand{\acm@contactemail}{} -\newcommand{\contactemail}[1]{\renewcommand{\acm@contactemail}{#1}} -%\newcommand{\acm@passport}{} -%\newcommand{\passport}[1]{\renewcommand{\acm@passport}{#1}} -\newcommand{\passport}[1]{% - \ClassWarningNoLine{siggraph}{% - You no longer need to specify which author should \MessageBreak% - receive a free conference passport when submitting \MessageBreak% - papers for review.\MessageBreak% - The passport command has therefore been disabled}} -\newcommand{\acmpassport}[1]{\passport{#1}} -\newcommand{\acm@keywords}{} -\newcommand{\keywords}[1]{\renewcommand{\acm@keywords}{#1}} -\newcommand{\acm@estpages}{} -\newcommand{\estpages}[1]{\renewcommand{\acm@estpages}{#1}} -% \end{macrocode} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% \end{macro} -% -% \begin{macro}{acm@cover} -% Set up a control to determine whether or not to print the cover page. -% \begin{macrocode} -\newif\ifacm@cover -\ifacm@camera - \acm@coverfalse -\else - \acm@covertrue -\fi -\newcommand{\suppresscover}{\acm@coverfalse} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\acm@coverpage} -% The |\acm@coverpage| macro handles the formatting of the cover page. -% \begin{macrocode} -\newcommand{\acm@coverpage}{% - \begin{titlepage}% - \def\thanks##1{} - \acm@setninepoint\normalsize - \renewcommand{\baselinestretch}{1}\selectfont - \begin{center}% - \vspace*{\fill} - {\LARGE\sffamily\bfseries\acm@sectionfont \acm@title \par}% - \vspace{2\baselineskip}% - {\large - \begin{tabular}[t]{c}% - \acm@author - \end{tabular}\par% - }% - \vspace{1\baselineskip}% - {\large \acm@affiliation \par}% - \addvspace{3\baselineskip}% - {Category: \acm@category \par}% - \vspace{0.5\baselineskip}% - {Format: \acm@format \par}% - \vspace{3\baselineskip}% - \begin{tabular}{ll} - Contact: & \acm@contactname \\[1\baselineskip] - & \begin{tabular}[b]{@{}l@{}} - \acm@contactaddress - \end{tabular} \\[1\baselineskip] - phone: & \acm@contactphone \\ - fax: & \acm@contactfax \\ - email: & \acm@contactemail - \end{tabular}\par% -% \vspace{3\baselineskip}% -% Author to receive compensation: \acm@passport \par% - \vspace*{3\baselineskip}% - {Estimated \# of pages: \acm@estpages \par}% - \vspace*{\baselineskip}% - {Keywords: \acm@keywords \par}% - \vspace*{\fill}% - \begin{minipage}{5in}% - \the\acm@abs - \end{minipage}\par% - \vspace*{\fill} - \end{center}% - \end{titlepage}% -} -% \end{macrocode} -% \end{macro} -% -% We cause the cover page to be generated at the end of the paper. -% \begin{macrocode} -\AtEndDocument{\ifacm@cover \acm@coverpage \fi} -% \end{macrocode} -% -% -% -% \subsection{Obsolete commands} -% -% The |\acmopening| command was needed before I figured out how to -% get the abstract environment to save its contents. It is no longer -% used, and now produces an error message. -% -% \begin{macrocode} -\newcommand{\acmopening}[1]{% - \ClassError{siggraph}{% - The acmopening command is no longer needed.\MessageBreak% - Switch to the maketitle command and abstract environment}{}} -% \end{macrocode} -% -% \subsection{Configurations file} -% -% Finally, we load the configuration file if it exists. -% -% \begin{macrocode} -\InputIfFileExists{siggraph.cfg} - {\typeout{***************************************^^J% - * Local config file siggraph.cfg used *^^J% - ***************************************}} - {} -% \end{macrocode} -% -% \iffalse -%</class> -% \fi -% -% \Finale diff --git a/Master/texmf-dist/source/latex/siggraph/siggraph.ins b/Master/texmf-dist/source/latex/siggraph/siggraph.ins deleted file mode 100644 index 49967e5eede..00000000000 --- a/Master/texmf-dist/source/latex/siggraph/siggraph.ins +++ /dev/null @@ -1,4 +0,0 @@ -\def\batchfile{siggraph.ins} -\input docstrip.tex -\keepsilent -\generateFile{siggraph.cls}{t}{\from{siggraph.dtx}{class}} diff --git a/Master/texmf-dist/tex/latex/siggraph/siggraph.cls b/Master/texmf-dist/tex/latex/siggraph/siggraph.cls deleted file mode 100644 index 8ca0ec0ad89..00000000000 --- a/Master/texmf-dist/tex/latex/siggraph/siggraph.cls +++ /dev/null @@ -1,435 +0,0 @@ -%% -%% This is file `siggraph.cls', -%% generated with the docstrip utility. -%% -%% The original source files were: -%% -%% siggraph.dtx (with options: `class') -%% -%% IMPORTANT NOTICE: -%% -%% For the copyright see the source file. -%% -%% Any modified versions of this file must be renamed -%% with new filenames distinct from siggraph.cls. -%% -%% For distribution of the original source see the terms -%% for copying and modification in the file siggraph.dtx. -%% -%% This generated file may be distributed as long as the -%% original source files, as listed above, are part of the -%% same distribution. (The sources need not necessarily be -%% in the same archive or directory.) -%% -%% Copyright (C) 1996 Daniel Kartch -%% Program of Computer Graphics -%% Cornell University -%% dan@graphics.cornell.edu -%% -%% This file is distributed in the hope that it will be useful, -%% but WITHOUT ANY WARRANTY; without even the implied warranty of -%% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. -%% -%% -%% NOTE: -%% This is a beta release and hasn't been thoroughly tested yet. Please -%% send me any bug reports, suggestions for improvement, or other comments. -%% I will do my best to fix any problems before the Siggraph submission -%% deadline, but I make no promises. The likelihood of my responding to -%% any given comment is directly proportional to the amount of time before -%% the deadline that the comment is received. -%% -%% \CharacterTable -%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z -%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z -%% Digits \0\1\2\3\4\5\6\7\8\9 -%% Exclamation \! Double quote \" Hash (number) \# -%% Dollar \$ Percent \% Ampersand \& -%% Acute accent \' Left paren \( Right paren \) -%% Asterisk \* Plus \+ Comma \, -%% Minus \- Point \. Solidus \/ -%% Colon \: Semicolon \; Less than \< -%% Equals \= Greater than \> Question mark \? -%% Commercial at \@ Left bracket \[ Backslash \\ -%% Right bracket \] Circumflex \^ Underscore \_ -%% Grave accent \` Left brace \{ Vertical bar \| -%% Right brace \} Tilde \~} -%% -\NeedsTeXFormat{LaTeX2e}[1994/06/01] -\ProvidesClass{siggraph} -[1996/01/17 v1.1.1 - Siggraph proceedings document class] -\newif\ifacm@camera -\newif\ifacm@preprint -\newcommand{\acm@columnmode}{} -\newcommand{\acm@pointsize}{} -\newif\ifacm@doublespaced -\DeclareOption{cameraready}{% - \acm@cameratrue% - \acm@preprintfalse% - \renewcommand{\acm@columnmode}{twocolumn}% - \acm@doublespacedfalse% - \renewcommand{\acm@pointsize}{9pt}} -\DeclareOption{review}{% - \acm@camerafalse% - \renewcommand{\acm@columnmode}{twocolumn}% - \acm@doublespacedfalse% - \renewcommand{\acm@pointsize}{9pt}} -\DeclareOption{widereview}{% - \acm@camerafalse% - \renewcommand{\acm@columnmode}{onecolumn}% - \acm@doublespacedtrue% - \renewcommand{\acm@pointsize}{12pt}} -\DeclareOption{preprint}{% - \acm@preprinttrue} -\ExecuteOptions{cameraready} -\newcommand{\acm@optwarning}[1]{% - \ifacm@camera - \ClassWarningNoLine{siggraph}% - {#1 option used in camera-ready mode.\MessageBreak - This violates submission specifications} - \fi -} -\DeclareOption{onecolumn}{% - \acm@optwarning{onecolumn} - \renewcommand{\acm@columnmode}{onecolumn}} -\DeclareOption{twocolumn}{% - \renewcommand{\acm@columnmode}{twocolumn}} -\DeclareOption{9pt}{% - \renewcommand{\acm@pointsize}{9pt}} -\DeclareOption{10pt}{% - \acm@optwarning{10pt} - \renewcommand{\acm@pointsize}{10pt}} -\DeclareOption{11pt}{% - \acm@optwarning{11pt} - \renewcommand{\acm@pointsize}{11pt}} -\DeclareOption{12pt}{% - \acm@optwarning{12pt} - \renewcommand{\acm@pointsize}{12pt}} -\DeclareOption{singlespace}{% - \acm@doublespacedfalse} -\DeclareOption{doublespace}{% - \acm@optwarning{doublespace} - \acm@doublespacedtrue} -\newcount\acm@specversion -\DeclareOption{version1996}{\acm@specversion=1996} -\DeclareOption{version1994}{\acm@specversion=1994} -\ExecuteOptions{version1996} -\DeclareOption{titlepage}{% - \OptionNotUsed% - \ClassWarningNoLine{siggraph}{titlepage option not allowed}} -\DeclareOption{landscape}{% - \OptionNotUsed% - \ClassWarningNoLine{siggraph}{landscape option not allowed}} -\DeclareOption*{\PassOptionsToClass{\CurrentOption}{article}} -\ProcessOptions -\PassOptionsToClass{\acm@columnmode}{article} -\ifdim\acm@pointsize>9pt - \PassOptionsToClass{\acm@pointsize}{article} -\fi -\LoadClass{article} -\newcommand{\acm@preprinttext}{To appear in the SIGGRAPH conference proceedings} -\newcommand{\preprinttext}[1]{\renewcommand{\acm@preprinttext}{#1}} -\newcommand{\ifcamera}[1]{\ifacm@camera #1 \fi} -\newcommand{\ifreview}[1]{\ifacm@camera \else #1 \fi} -\newcommand{\ifcameraelse}[2]{\ifacm@camera #1 \else #2 \fi} -\newcommand{\ifreviewelse}[2]{\ifacm@camera #2 \else #1 \fi} -\setlength{\textheight}{9.25in} -\setlength{\topmargin}{-0.700in} -\setlength{\headheight}{0.2in} -\setlength{\headsep}{0.250in} -\setlength{\footskip}{0.5in} -\flushbottom -\setlength{\textwidth}{7in} -\setlength{\oddsidemargin}{-0.25in} -\setlength{\evensidemargin}{-0.25in} -\setlength{\columnsep}{2pc} -\setlength{\parindent}{1em} -\renewcommand{\ps@plain}% - {% - \ifacm@preprint% -\renewcommand{\@oddhead}{\hfil\textit{\large\acm@preprinttext}\hfil}% - \else% -\renewcommand{\@oddhead}{}% - \fi% - \ifacm@camera% -\ifacm@preprint% - \renewcommand{\@oddfoot}{\hfil\textrm{\thepage}\hfil}% -\else% - \renewcommand{\@oddfoot}{}% -\fi% - \else% -\renewcommand{\@oddfoot}{\hfil\textrm{\thepage}\hfil}% - \fi% - \renewcommand{\@evenhead}{\@oddhead}% - \renewcommand{\@evenfoot}{\@oddfoot}% - } -\renewcommand{\ps@empty}% - {% - \ifacm@preprint% -\renewcommand{\@oddhead}{\hfil\textit{\large\acm@preprinttext}\hfil}% - \else% -\renewcommand{\@oddhead}{}% - \fi% - \renewcommand{\@oddfoot}{}% - \renewcommand{\@evenhead}{\@oddhead}% - \renewcommand{\@evenfoot}{\@oddfoot}% - } -\pagestyle{plain} -\newcommand{\acm@setninepoint}{ - \renewcommand\normalsize{% - \@setfontsize\normalsize\@ixpt\@xpt - \abovedisplayskip 9\p@ \@plus2\p@ \@minus4\p@ - \abovedisplayshortskip \z@ \@plus3\p@ - \belowdisplayshortskip 6\p@ \@plus3\p@ \@minus3\p@ - \belowdisplayskip \abovedisplayskip - \let\@listi\@listI} - \renewcommand\small{% - \@setfontsize\small\@viipt\@ixpt - \abovedisplayskip 8.5\p@ \@plus3\p@ \@minus4\p@ - \abovedisplayshortskip \z@ \@plus2\p@ - \belowdisplayshortskip 4\p@ \@plus2\p@ \@minus2\p@ - \def\@listi{\leftmargin\leftmargini - \topsep 4\p@ \@plus2\p@ \@minus2\p@ - \parsep 2\p@ \@plus\p@ \@minus\p@ - \itemsep \parsep}% - \belowdisplayskip \abovedisplayskip} - \renewcommand\footnotesize{% - \@setfontsize\footnotesize\@viiipt{9.5}% - \abovedisplayskip 6\p@ \@plus2\p@ \@minus4\p@ - \abovedisplayshortskip \z@ \@plus\p@ - \belowdisplayshortskip 3\p@ \@plus\p@ \@minus2\p@ - \def\@listi{\leftmargin\leftmargini - \topsep 3\p@ \@plus\p@ \@minus\p@ - \parsep 2\p@ \@plus\p@ \@minus\p@ - \itemsep \parsep}% - \belowdisplayskip \abovedisplayskip} - \renewcommand\scriptsize{\@setfontsize\scriptsize\@viipt\@viiipt} - \renewcommand\tiny{\@setfontsize\tiny\@vpt\@vipt} - \renewcommand\large{\@setfontsize\large\@xpt\@xiipt} - \renewcommand\Large{\@setfontsize\Large\@xiipt{14}} - \renewcommand\LARGE{\@setfontsize\LARGE\@xivpt{18}} - \renewcommand\huge{\@setfontsize\huge\@xviipt{22}} - \renewcommand\Huge{\@setfontsize\Huge\@xxpt{25}} - \selectfont -} -\ifdim\acm@pointsize=9pt - \acm@setninepoint -\fi -\newcommand{\acm@sectionfont}{} -\newcommand{\sectionfont}[1]{\renewcommand{\acm@sectionfont}{#1}} -\renewcommand\section{\@startsection {section}{1}{\z@}% - {-3.5ex \@plus -1ex \@minus -.2ex}% - {2.3ex \@plus.2ex}% - {\reset@font\Large\sffamily\bfseries\acm@sectionfont}} -\renewcommand\subsection{\@startsection{subsection}{2}{\z@}% - {-3.25ex\@plus -1ex \@minus -.2ex}% - {1.5ex \@plus .2ex}% - {\reset@font\large\sffamily\bfseries\acm@sectionfont}} -\renewcommand\subsubsection{\@startsection{subsubsection}{3}{\z@}% - {-3.25ex\@plus -1ex \@minus -.2ex}% - {1.5ex \@plus .2ex}% - {\reset@font\normalsize\sffamily\bfseries\acm@sectionfont}} -\renewcommand\paragraph{\@startsection{paragraph}{4}{\z@}% - {3.25ex \@plus1ex \@minus.2ex}% - {-1em}% - {\reset@font\normalsize\sffamily\bfseries\acm@sectionfont}} -\renewcommand\subparagraph{\@startsection{subparagraph}{5}{\parindent}% - {3.25ex \@plus1ex \@minus .2ex}% - {-1em}% - {\reset@font\normalsize\sffamily\bfseries\acm@sectionfont}} -\newcommand{\acm@empty}{} -\newcommand{\acm@affiliation}{} -\newcommand{\affiliation}[1]{\renewcommand{\acm@affiliation}{#1}} -\newcommand{\acm@category}{} -\newcommand{\category}[1]{\renewcommand{\acm@category}{#1}} -\newcommand{\acmcategory}[1]{\category{#1}} -\newcommand{\acm@format}{} -\newcommand{\format}[1]{\renewcommand{\acm@format}{#1}} -\newcommand{\acmformat}[1]{\format{#1}} -\newcommand{\acm@teaser}{} -\newcommand{\teaser}[1]{\renewcommand{\acm@teaser}{#1}} -\newlength{\titlespace} -\setlength{\titlespace}{0.25in} -\newlength{\teaserspace} -\setlength{\teaserspace}{0.25in} -\ifacm@camera - \renewcommand{\@maketitle}{% - \begin{center}% - {\LARGE\sffamily\bfseries\acm@sectionfont \@title \par}% - \vspace{1\baselineskip}% - \large - \begin{tabular}[t]{c}% - \@author - \end{tabular}\par% - \ifx\acm@affiliaton\acm@empty \else% - \vspace{1\baselineskip}% - \acm@affiliation\par% - \fi% - \vspace{\titlespace}% - \ifx\acm@teaser\acm@empty \else% - \begingroup% - \def\@captype{figure}% - \acm@teaser% - \endgroup\par% - \vspace{\teaserspace}% - \fi% - \end{center} \par% - } -\else - \renewcommand{\@maketitle}{% - \begin{center}% - \renewcommand{\thanks}[1]{} - {\LARGE\sffamily\bfseries\acm@sectionfont \@title \par}% - \vspace{1\baselineskip}% - {Category: \acm@category \par}% - \vspace{\titlespace}% - \ifx\acm@teaser\acm@empty \else% - \begingroup% - \def\@captype{figure}% - \acm@teaser% - \endgroup\par% - \vspace{\teaserspace}% - \fi% - \end{center} \par% - } -\fi -\let\acm@origmaketitle\maketitle -\renewcommand{\maketitle}{% - \let\acm@title\@title% - \let\acm@author\@author% - \acm@origmaketitle% - \thispagestyle{empty}% - \ifacm@doublespaced% - \renewcommand{\baselinestretch}{1.66}\selectfont% - \fi -} -\newtoks\acm@abs -\ifacm@camera\else - \long\def\acm@add#1{\global\acm@abs\expandafter{\the\acm@abs#1}} - \long\def\acm@collect{% - \global\acm@abs{}% - \let\abstract\acm@@collect - \abstract - } - \long\def\acm@@collect#1\end#2{% - \def\@tempa{#2}% - \ifx\@tempa\@currenvir - \acm@add{#1}% - \edef\abstract{\noexpand\end{\@tempa}}% - \else - \acm@add{#1\end{#2}}% - \fi - \abstract - } - \newcommand{\acm@modify}{% - \let\acm@origabs\abstract% - \let\acm@origendabs\endabstract% - \renewenvironment{abstract}% - {\acm@collect}% - {\begingroup - \let\abstract\acm@origabs - \let\endabstract\acm@origendabs - \begin{abstract} \the\acm@abs \end{abstract} - \endgroup}% - } - \AtBeginDocument{\acm@modify} -\fi -\newlength{\acm@copyrightlength} -\ifnum\acm@specversion=1994 - \setlength{\acm@copyrightlength}{1in} -\else - \setlength{\acm@copyrightlength}{1.5in} -\fi -\newcommand{\copyrightspace}{% - \renewcommand{\thefootnote}{}% - \footnotetext[0]{\rule[\acm@copyrightlength]{2.71828in}{0in}}% - \renewcommand{\thefootnote}{\arabic{footnote}} -} -\renewcommand{\footnoterule}{% - \kern-3pt - \hrule width 0.45\columnwidth - \kern 2.6pt} -\newcommand{\acm@contactname}{} -\newcommand{\contactname}[1]{\renewcommand{\acm@contactname}{#1}} -\newcommand{\acm@contactaddress}{} -\newcommand{\contactaddress}[1]{\renewcommand{\acm@contactaddress}{#1}} -\newcommand{\acm@contactphone}{} -\newcommand{\contactphone}[1]{\renewcommand{\acm@contactphone}{#1}} -\newcommand{\acm@contactfax}{} -\newcommand{\contactfax}[1]{\renewcommand{\acm@contactfax}{#1}} -\newcommand{\acm@contactemail}{} -\newcommand{\contactemail}[1]{\renewcommand{\acm@contactemail}{#1}} -\newcommand{\passport}[1]{% - \ClassWarningNoLine{siggraph}{% - You no longer need to specify which author should \MessageBreak% - receive a free conference passport when submitting \MessageBreak% - papers for review.\MessageBreak% - The passport command has therefore been disabled}} -\newcommand{\acmpassport}[1]{\passport{#1}} -\newcommand{\acm@keywords}{} -\newcommand{\keywords}[1]{\renewcommand{\acm@keywords}{#1}} -\newcommand{\acm@estpages}{} -\newcommand{\estpages}[1]{\renewcommand{\acm@estpages}{#1}} -\newif\ifacm@cover -\ifacm@camera - \acm@coverfalse -\else - \acm@covertrue -\fi -\newcommand{\suppresscover}{\acm@coverfalse} -\newcommand{\acm@coverpage}{% - \begin{titlepage}% - \def\thanks##1{} - \acm@setninepoint\normalsize - \renewcommand{\baselinestretch}{1}\selectfont - \begin{center}% - \vspace*{\fill} - {\LARGE\sffamily\bfseries\acm@sectionfont \acm@title \par}% - \vspace{2\baselineskip}% - {\large - \begin{tabular}[t]{c}% - \acm@author - \end{tabular}\par% - }% - \vspace{1\baselineskip}% - {\large \acm@affiliation \par}% - \addvspace{3\baselineskip}% - {Category: \acm@category \par}% - \vspace{0.5\baselineskip}% - {Format: \acm@format \par}% - \vspace{3\baselineskip}% - \begin{tabular}{ll} - Contact: & \acm@contactname \\[1\baselineskip] - & \begin{tabular}[b]{@{}l@{}} - \acm@contactaddress - \end{tabular} \\[1\baselineskip] - phone: & \acm@contactphone \\ - fax: & \acm@contactfax \\ - email: & \acm@contactemail - \end{tabular}\par% - \vspace*{3\baselineskip}% - {Estimated \# of pages: \acm@estpages \par}% - \vspace*{\baselineskip}% - {Keywords: \acm@keywords \par}% - \vspace*{\fill}% - \begin{minipage}{5in}% - \the\acm@abs - \end{minipage}\par% - \vspace*{\fill} - \end{center}% - \end{titlepage}% -} -\AtEndDocument{\ifacm@cover \acm@coverpage \fi} -\newcommand{\acmopening}[1]{% - \ClassError{siggraph}{% - The acmopening command is no longer needed.\MessageBreak% - Switch to the maketitle command and abstract environment}{}} -\InputIfFileExists{siggraph.cfg} - {\typeout{***************************************^^J% - * Local config file siggraph.cfg used *^^J% - ***************************************}} - {} -\endinput -%% -%% End of file `siggraph.cls'. diff --git a/Master/tlpkg/bin/tlpkg-ctan-check b/Master/tlpkg/bin/tlpkg-ctan-check index 0a33d023244..499e94bcf60 100755 --- a/Master/tlpkg/bin/tlpkg-ctan-check +++ b/Master/tlpkg/bin/tlpkg-ctan-check @@ -292,7 +292,7 @@ my @TLP_working = qw( seqsplit setspace seuthesis sf298 sffms sfg sfheaders sfmath sgame shadbox shade shadethm shadow shapepar shipunov shorttoc show2e showdim showexpl showlabels showtags shuffle - sidecap sides siggraph silence simplecd simplecv simplewick siunitx + sidecap sides silence simplecd simplecv simplewick siunitx skak skaknew skb skeycommand skeyval slantsc slashbox slideshow smalltableof smartref snapshot songbook sort-by-letters soton soul soyombo diff --git a/Master/tlpkg/libexec/ctan2tds b/Master/tlpkg/libexec/ctan2tds index 82fd1993abe..3b789b10d3c 100755 --- a/Master/tlpkg/libexec/ctan2tds +++ b/Master/tlpkg/libexec/ctan2tds @@ -651,6 +651,7 @@ $Master = "$mydir/../.."; 'shortlst', "die 'skipping, nosell license'", 'showexpl', "&MAKEflatten", 'siam', "die 'skipping, nonfree license'", + 'siggraph', "die 'skipping, nonfree license'", 'skak', "&MAKEflatten", 'slidenotes', "die 'skipping, nonfree'", 'smflatex', "die 'skipping, nosource'", diff --git a/Master/tlpkg/tlpsrc/collection-publishers.tlpsrc b/Master/tlpkg/tlpsrc/collection-publishers.tlpsrc index 6a563883fa1..e18cb763fa7 100644 --- a/Master/tlpkg/tlpsrc/collection-publishers.tlpsrc +++ b/Master/tlpkg/tlpsrc/collection-publishers.tlpsrc @@ -61,7 +61,6 @@ depend revtex4 depend ryethesis depend sageep depend seuthesis -depend siggraph depend soton depend spie depend stellenbosch diff --git a/Master/tlpkg/tlpsrc/siggraph.tlpsrc b/Master/tlpkg/tlpsrc/siggraph.tlpsrc deleted file mode 100644 index e69de29bb2d..00000000000 --- a/Master/tlpkg/tlpsrc/siggraph.tlpsrc +++ /dev/null |