diff options
19 files changed, 2 insertions, 4137 deletions
diff --git a/Master/texmf-dist/doc/latex/sagetex/README b/Master/texmf-dist/doc/latex/sagetex/README deleted file mode 100644 index d677252b478..00000000000 --- a/Master/texmf-dist/doc/latex/sagetex/README +++ /dev/null @@ -1,56 +0,0 @@ -This is the SageTeX package. It allows you to embed code, results of -computations, and plots from the Sage mathematics software suite -(http://sagemath.org) into LaTeX documents. -==================================================================== - -The recommended way to acquire and install SageTeX is by installing the -Sage spkg; visit http://sagemath.org/packages/optional/, find the -current version number, and run "sage -i sagetex-[version]" in a -terminal. Then you'll need to make the file sagetex.sty known to TeX; -that file will be in SAGE_ROOT/local/share/texmf/tex/generic/sagetex, -along with documentation and examples. - -If you can't or don't want to install SageTeX by using Sage, you can use -this CTAN package. If sagetex.py and sagetex.sty haven't been extracted -from the .dtx file, you'll need to do: - - 0. Run `latex sagetexpackage.ins' - -If a PDF file of the documentation wasn't included with this -distribution of SageTeX, you will need to build the documentation -yourself. To do that: - - 1. Run `latex sagetexpackage.dtx' - 2. Run `sage sagetexpackage.sage' - 3. Run the indexing commands that the .ins file told you about. - 4. Run `latex sagetexpackage.dtx' again. - -You can skip step 3 if you don't care about the index. You will need the -pgf and tikz packages installed to typeset the figures. - -The file example.tex has, as you likely guessed, a bunch of examples -showing you how this package works. You can compile it using a another -latex-sage-latex cycle as in steps 1-2-4 above. Note that example.tex -includes some PNG graphics which latex cannot use; to see those, use -pdflatex instead of regular latex or enable the imagemagick option. (See -the documentation.) - -To use the SageTeX package with your own documents, see the -"Installation" section of the documentation. - -SageTeX now includes `remote-sagetex.py', a plain Python script that -allows you to use a remote Sage server instead of a local Sage -installation, so now you can use SageTeX on any computer with TeX and -Python 2.6 installed. - -This work builds on a lot of work by others; see the "Credits" section -of the documentation for credits. The source code may be modified and -distributed under the terms of the GPL, v2 or later; the documentation -may be modified and distributed under a Creative Commons Attribution - -Noncommercial - Share Alike 3.0 License. See the "Copying and licenses" -section of the documentation. - -Please let me know if you find any bugs or have any ideas for -improvement! - -- Dan Drake <http://mathsci.kaist.ac.kr/~drake/> diff --git a/Master/texmf-dist/doc/latex/sagetex/example.pdf b/Master/texmf-dist/doc/latex/sagetex/example.pdf Binary files differdeleted file mode 100644 index 270018177db..00000000000 --- a/Master/texmf-dist/doc/latex/sagetex/example.pdf +++ /dev/null diff --git a/Master/texmf-dist/doc/latex/sagetex/example.tex b/Master/texmf-dist/doc/latex/sagetex/example.tex deleted file mode 100644 index d9c67589fbc..00000000000 --- a/Master/texmf-dist/doc/latex/sagetex/example.tex +++ /dev/null @@ -1,264 +0,0 @@ -% General example LaTeX file for including Sage calculations and plots -% Build with: -% -% (pdf)latex example.tex; sage example.sage; pdflatex example.tex -% -% Please read README and the documentation of the SageTeX package for -% more information! - -\documentclass{article} -\title{Examples of embedding Sage in \LaTeX{} with \textsf{Sage\TeX}} -\author{Dan Drake and others} -\usepackage{amsmath} -\usepackage{sagetex} -% -% If you want SageTeX to use Imagemagick's `convert' utility to make eps -% files from png files when generating a dvi file, add the "imagemagick" -% option above: -% -% \usepackage[imagemagick]{sagetex} - -\setlength{\sagetexindent}{10ex} - -\begin{document} -\maketitle - -\section{Inline Sage, code blocks} - -This is an example $2+2=\sage{2+2}$. If you raise the current year mod -$100$ (which equals $\sage{mod(\the\year, 100)}$) to the power of the -current day ($\the\day$), you get $\sage{Integer(mod(\the\year, -100))^\the\day}$. Also, $\the\year$ modulo $42$ is $\sage{\the\year -\percent 42}$. - -Code block which uses a variable \texttt{s} to store the solutions: -\begin{sageblock} - 1+1 - var('a,b,c') - eqn = [a+b*c==1, b-a*c==0, a+b==5] - s = solve(eqn, a,b,c) -\end{sageblock} - -Solutions of $\mbox{eqn}=\sage{eqn}$: -\[ -\sage{s[0]} -\] -\[ -\sage{s[1]} -\] - -Now we evaluate the following block: -\begin{sageblock} -E = EllipticCurve("37a") -\end{sageblock} -You can't do assignment inside \verb|\sage| macros, since Sage doesn't -know how to typeset the output of such a thing. So you have to use a -code block. The elliptic curve $E$ given by $\sage{E}$ has discriminant -$\sage{E.discriminant()}$. - -You can do anything in a code block that you can do in Sage and/or -Python. Here we save an elliptic curve into a file. -\begin{sageblock} -try: - E = load('E2') -except IOError: - E = EllipticCurve([1,2,3,4,5]) - E.anlist(100000) - E.save('E2') -\end{sageblock} - -The 9999th Fourier coefficient of $\sage{E}$ is -$\sage{E.anlist(100000)[9999]}$. - -The following code block doesn't appear in the typeset file\dots -\begin{sagesilent} - e = 2 - e = 3*e + 1 -\end{sagesilent} -but we can refer to whatever we did in that code block: $e=\sage{e}$. - -\begin{sageblock} - var('x') - f(x) = log(sin(x)/x) -\end{sageblock} -The Taylor Series of $f$ begins: $\sage{ f.taylor(x, 0, 10) }$. - -\section{Plotting} - -Here's a plot of the elliptic curve $E$. - -\sageplot{E.plot(-3,3)} - -\begin{sagesilent} - # the var line is unecessary unless you've defined x to be something - # other than a symbolic variable - var('x') - f(x) = -x^3+3*x^2+7*x-4 -\end{sagesilent} - -You can use variables to hold plot objects and do stuff with them. -\begin{sageblock} - p = plot(f, x, -5, 5) -\end{sageblock} - -Here's a small plot of $f$ from $-5$ to $5$, which I've centered: - -\begin{center} \sageplot[scale=.2]{p} \end{center} - -On second thought, use the default size of $3/4$ the \verb|\textwidth| -and don't use axes: - -\sageplot{p, axes=False} - -Remember, you're using Sage, and can therefore call upon any of the -software packages Sage is built out of. -\begin{sageblock} -f = maxima('sin(x)^2*exp(x)') -g = f.integrate('x') -\end{sageblock} -Plot $g(x)$, but don't typeset it. -\begin{sagesilent} - # g is a Maxima thingy, it needs to get converted into a Sage object - plot1 = plot(g.sage(),x,-1,2*pi) -\end{sagesilent} - -You can specify a file format and options for \verb|includegraphics|. -The default is for EPS and PDF files, which are the best choice in -almost all situations. (Although see the section on 3D plotting.) - -\sageplot[angle=45, width=.5\textwidth][png]{plot1} - -If you use regular \verb|latex| to make a DVI file, you'll see a box, -because DVI files can't include PNG files. If you use \verb|pdflatex| -that will work. See the documentation for details. - -When using \verb|\sageplot|, you can pass in just about anything that -Sage can call \verb|.save()| on to produce a graphics file: - -\begin{center} -\sageplot{plot1 + plot(f.sage(),x,-1,2*pi,rgbcolor=hue(0.4)), figsize=[1,2]} -\end{center} - -\sageplot{graphs.FlowerSnark().plot()} - -\begin{sageblock} -G4 = DiGraph({1:[2,2,3,5], 2:[3,4], 3:[4], 4:[5,7], 5:[6]},\ - multiedges=True) -G4plot = G4.plot(layout='circular') -\end{sageblock} - -\sageplot{G4plot, axes=False} - -Indentation and so on works fine. -\begin{sageblock} - s = 7 - s2 = 2^s - P.<x> = GF(2)[] - M = matrix(parent(x),s2) - for i in range(s2): - p = (1+x)^i - pc = p.coeffs() - a = pc.count(1) - for j in range(a): - idx = pc.index(1) - M[i,idx+j] = pc.pop(idx) - - matrixprogram = matrix_plot(M,cmap='Greys') -\end{sageblock} -And here's the picture: - -\sageplot{matrixprogram} - -Reset \texttt{x} in Sage so that it's not a generator for the polynomial -ring: \sage{var('x')} - -\subsection{3D plotting} - -3D plotting right now is problematic because there's no convenient way -to produce vector graphics. We can make PNGs, though, and since the -\verb|sageplot| command defaults to EPS and PDF, \emph{you must specify -a valid format for 3D plotting}. Sage right now (version 3.4.2) can't -produce EPS or PDF files from plot3d objects, so if you don't specify a -valid format, things will go badly. You can specify the -``\texttt{imagemagick}'' option, which will use the Imagemagick -\texttt{convert} utility to make EPS files. See the documentation for -details. - -Here's the famous Sage cube graph: - -\begin{sageblock} - G = graphs.CubeGraph(5) -\end{sageblock} - -% need empty [] so sageplot knows you want png format, and aren't -% passing an option to includegraphics -\sageplot[][png]{G.plot3d(engine='tachyon')} - -\section{Pausing Sage\TeX} -\label{sec:pausing-sagetex} - -Sometimes you want to ``pause'' for a bit while writing your document if -you have embedded a long calculation or just want to concentrate on the -\LaTeX{} and ignore any Sage stuff. You can use the \verb|\sagetexpause| -and \verb|\sagetexunpause| macros to do that. - -\sagetexpause - -A calculation: $\sage{factor(2^325 + 1)}$ and a code environment that -simulates a time-consuming calculation. While paused, this will get -skipped over. -\begin{sageblock} - import time - time.sleep(15) -\end{sageblock} - -Graphics are also skipped: \sageplot{plot(2*sin(x^2) + x^2, (x, 0, 5))} - -\sagetexunpause - -\section{Make Sage write your \LaTeX{} for you} - -With \textsf{Sage\TeX}, you can not only have Sage do your math for you, -it can write parts of your \LaTeX{} document for you! For example, I -hate writing \texttt{tabular} environments; there's too many fiddly -little bits of punctuation and whatnot\ldots and what if you want to add -a column? It's a pain---or rather, it \emph{was} a pain. Here's how to -make Pascal's triangle. It requires the \texttt{amsmath} package because -of what Sage does when producing a \LaTeX{} representation of a string. -(It puts it inside a \verb|\text| macro.) - -\begin{sageblock} -def pascals_triangle(n): - # start of the table - s = r"\begin{tabular}{cc|" + "r" * (n+1) + "}" - s += r" & & $k$: & \\" - # second row, with k values: - s += r" & " - for k in [0..n]: - s += "& %d " % k - s += r"\\" - # the n = 0 row: - s += r"\hline" + "\n" + r"$n$: & 0 & 1 & \\" - # now the rest of the rows - for r in [1..n]: - s += " & %d " % r - for k in [0..r]: - s += "& %d " % binomial(r, k) - s += r"\\" - # add the last line and return - s += r"\end{tabular}" - return s - -# how big should the table be? -n = 8 -\end{sageblock} - -Okay, now here's the table. To change the size, edit \texttt{n} above. -If you have several tables, you can use this to get them all the same -size, while changing only one thing. - -\begin{center} - \sage{pascals_triangle(n)} -\end{center} - -\end{document} diff --git a/Master/texmf-dist/doc/latex/sagetex/extractsagecode.py b/Master/texmf-dist/doc/latex/sagetex/extractsagecode.py deleted file mode 100644 index 62200d42d68..00000000000 --- a/Master/texmf-dist/doc/latex/sagetex/extractsagecode.py +++ /dev/null @@ -1,84 +0,0 @@ -#!/usr/bin/env python -## -## This is file `extractsagecode.py', -## generated with the docstrip utility. -## -## The original source files were: -## -## scripts.dtx (with options: `extractscript') -## -## This is a generated file. It is part of the SageTeX package. -## -## Copyright (C) 2009 by Dan Drake <ddrake@member.ams.org> -## -## This program is free software: you can redistribute it and/or modify it -## under the terms of the GNU General Public License as published by the -## Free Software Foundation, either version 2 of the License, or (at your -## option) any later version. -## -## This program is distributed in the hope that it will be useful, but -## WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General -## Public License for more details. -## -## You should have received a copy of the GNU General Public License along -## with this program. If not, see <http://www.gnu.org/licenses/>. -## -import sys -import time -import getopt -import os.path -from sagetexparse import SageCodeExtractor - -def usage(): - print("""Usage: %s [-h|--help] [-o|--overwrite] inputfile [outputfile] - -Extracts Sage code from `inputfile'. - -`inputfile' can include the .tex extension or not. If you provide -`outputfile', the results will be written to a file of that name, -otherwise the result will be printed to stdout. - -Specify `-o' or `--overwrite' to overwrite the file if it exists. - -See the SageTeX documentation for more details.""" % sys.argv[0]) - -try: - opts, args = getopt.getopt(sys.argv[1:], 'ho', ['help', 'overwrite']) -except getopt.GetoptError, err: - print str(err) - usage() - sys.exit(2) - -overwrite = False -for o, a in opts: - if o in ('-h', '--help'): - usage() - sys.exit() - elif o in ('-o', '--overwrite'): - overwrite = True - -if len(args) == 0 or len(args) > 2: - print('Error: wrong number of arguments. Make sure to specify options first.\n') - usage() - sys.exit(2) - -if len(args) == 2 and (os.path.exists(args[1]) and not overwrite): - print('Error: %s exists and overwrite option not specified.' % args[1]) - sys.exit(1) - -src, ext = os.path.splitext(args[0]) -sagecode = SageCodeExtractor(src) -header = """\ -# This file contains Sage code extracted from %s%s. -# Processed %s. - -""" % (src, ext, time.strftime('%a %d %b %Y %H:%M:%S', time.localtime())) - -if len(args) == 2: - dest = open(args[1], 'w') -else: - dest = sys.stdout - -dest.write(header) -dest.write(sagecode.result) diff --git a/Master/texmf-dist/doc/latex/sagetex/makestatic.py b/Master/texmf-dist/doc/latex/sagetex/makestatic.py deleted file mode 100644 index 2121d9b78c5..00000000000 --- a/Master/texmf-dist/doc/latex/sagetex/makestatic.py +++ /dev/null @@ -1,84 +0,0 @@ -#!/usr/bin/env python -## -## This is file `makestatic.py', -## generated with the docstrip utility. -## -## The original source files were: -## -## scripts.dtx (with options: `staticscript') -## -## This is a generated file. It is part of the SageTeX package. -## -## Copyright (C) 2009 by Dan Drake <ddrake@member.ams.org> -## -## This program is free software: you can redistribute it and/or modify it -## under the terms of the GNU General Public License as published by the -## Free Software Foundation, either version 2 of the License, or (at your -## option) any later version. -## -## This program is distributed in the hope that it will be useful, but -## WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General -## Public License for more details. -## -## You should have received a copy of the GNU General Public License along -## with this program. If not, see <http://www.gnu.org/licenses/>. -## -import sys -import time -import getopt -import os.path -from sagetexparse import DeSageTex - -def usage(): - print("""Usage: %s [-h|--help] [-o|--overwrite] inputfile [outputfile] - -Removes SageTeX macros from `inputfile' and replaces them with the -Sage-computed results to make a "static" file. You'll need to have run -Sage on `inputfile' already. - -`inputfile' can include the .tex extension or not. If you provide -`outputfile', the results will be written to a file of that name. -Specify `-o' or `--overwrite' to overwrite the file if it exists. - -See the SageTeX documentation for more details.""" % sys.argv[0]) - -try: - opts, args = getopt.getopt(sys.argv[1:], 'ho', ['help', 'overwrite']) -except getopt.GetoptError, err: - print str(err) - usage() - sys.exit(2) - -overwrite = False -for o, a in opts: - if o in ('-h', '--help'): - usage() - sys.exit() - elif o in ('-o', '--overwrite'): - overwrite = True - -if len(args) == 0 or len(args) > 2: - print('Error: wrong number of arguments. Make sure to specify options first.\n') - usage() - sys.exit(2) - -if len(args) == 2 and (os.path.exists(args[1]) and not overwrite): - print('Error: %s exists and overwrite option not specified.' % args[1]) - sys.exit(1) - -src, ext = os.path.splitext(args[0]) -desagetexed = DeSageTex(src) -header = """\ -## SageTeX commands have been automatically removed from this file and -## replaced with plain LaTeX. Processed %s. - -""" % time.strftime('%a %d %b %Y %H:%M:%S', time.localtime()) - -if len(args) == 2: - dest = open(args[1], 'w') -else: - dest = sys.stdout - -dest.write(header) -dest.write(desagetexed.result) diff --git a/Master/texmf-dist/doc/latex/sagetex/remote-sagetex.py b/Master/texmf-dist/doc/latex/sagetex/remote-sagetex.py deleted file mode 100644 index e8946bd1814..00000000000 --- a/Master/texmf-dist/doc/latex/sagetex/remote-sagetex.py +++ /dev/null @@ -1,344 +0,0 @@ -#!/usr/bin/env python -## -## This is file `remote-sagetex.py', -## generated with the docstrip utility. -## -## The original source files were: -## -## remote-sagetex.dtx (with options: `remotesagetex') -## -## This is a generated file. It is part of the SageTeX package. -## -## Copyright (C) 2009 by Dan Drake <ddrake@member.ams.org> -## -## This program is free software: you can redistribute it and/or modify it -## under the terms of the GNU General Public License as published by the -## Free Software Foundation, either version 2 of the License, or (at your -## option) any later version. -## -## This program is distributed in the hope that it will be useful, but -## WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General -## Public License for more details. -## -## You should have received a copy of the GNU General Public License along -## with this program. If not, see <http://www.gnu.org/licenses/>. -## -from __future__ import print_function -import json -import sys -import time -import re -import urllib -import hashlib -import os -import os.path -import shutil -import getopt -from contextlib import closing - -######################################################################### -# You can provide a filename here and the script will read your login # -# information from that file. The format must be: # -# # -# server = 'http://foo.com:8000' # -# username = 'my_name' # -# password = 's33krit' # -# # -# You can omit one or more of those lines, use " quotes, and put hash # -# marks at the beginning of a line for comments. Command-line args # -# take precedence over information from the file. # -######################################################################### -login_info_file = None # e.g. '/home/foo/Private/sagetex-login.txt' - -usage = """Process a SageTeX-generated .sage file using a remote Sage server. - -Usage: {0} [options] inputfile.sage - -Options: - - -h, --help: print this message - -s, --server: the Sage server to contact - -u, --username: username on the server - -p, --password: your password - -f, --file: get login information from a file - -If the server does not begin with the four characters `http', then -`https://' will be prepended to the server name. - -You can hard-code the filename from which to read login information into -the remote-sagetex script. Command-line arguments take precedence over -the contents of that file. See the SageTeX documentation for formatting -details. - -If any of the server, username, and password are omitted, you will be -asked to provide them. - -See the SageTeX documentation for more details on usage and limitations -of remote-sagetex.""".format(sys.argv[0]) - -server, username, password = (None,) * 3 - -try: - opts, args = getopt.getopt(sys.argv[1:], 'hs:u:p:f:', - ['help', 'server=', 'user=', 'password=', 'file=']) -except getopt.GetoptError as err: - print(str(err), usage, sep='\n\n') - sys.exit(2) - -for o, a in opts: - if o in ('-h', '--help'): - print(usage) - sys.exit() - elif o in ('-s', '--server'): - server = a - elif o in ('-u', '--user'): - username = a - elif o in ('-p', '--password'): - password = a - elif o in ('-f', '--file'): - login_info_file = a - -if len(args) != 1: - print('Error: must specify exactly one file. Please specify options first.', - usage, sep='\n\n') - sys.exit(2) - -jobname = os.path.splitext(args[0])[0] -traceback_str = 'Exception in SageTeX session {0}:'.format(time.time()) -def parsedotsage(fn): - with open(fn, 'r') as f: - inline = re.compile(r" _st_.inline\((?P<num>\d+), (?P<code>.*)\)") - plot = re.compile(r" _st_.plot\((?P<num>\d+), (?P<code>.*)\)") - goboom = re.compile(r" _st_.goboom\((?P<num>\d+)\)") - pausemsg = re.compile(r"print.'(?P<msg>SageTeX (un)?paused.*)'") - blockbegin = re.compile(r"_st_.blockbegin\(\)") - ignore = re.compile(r"(try:)|(except):") - in_comment = False - in_block = False - cmds = [] - for line in f.readlines(): - if line.startswith('"""'): - in_comment = not in_comment - elif not in_comment: - m = pausemsg.match(line) - if m: - cmds.append({'type': 'pause', - 'msg': m.group('msg')}) - m = inline.match(line) - if m: - cmds.append({'type': 'inline', - 'num': m.group('num'), - 'code': m.group('code')}) - m = plot.match(line) - if m: - cmds.append({'type': 'plot', - 'num': m.group('num'), - 'code': m.group('code')}) - m = goboom.match(line) - if m: - cmds[-1]['goboom'] = m.group('num') - if in_block: - in_block = False - if in_block and not ignore.match(line): - cmds[-1]['code'] += line - if blockbegin.match(line): - cmds.append({'type': 'block', - 'code': ''}) - in_block = True - return cmds -debug = False -class RemoteSage: - def __init__(self, server, user, password): - self._srv = server.rstrip('/') - sep = '___S_A_G_E___' - self._response = re.compile('(?P<header>.*)' + sep + - '\n*(?P<output>.*)', re.DOTALL) - self._404 = re.compile('404 Not Found') - self._session = self._get_url('login', - urllib.urlencode({'username': user, - 'password': - password}))['session'] - self._codewrap = """try: -{{0}} -except: - print('{0}') - traceback.print_exc()""".format(traceback_str) - self.do_block(""" - import traceback - def __st_plot__(counter, _p_, format='notprovided', **kwargs): - if format == 'notprovided': - formats = ['eps', 'pdf'] - else: - formats = [format] - for fmt in formats: - plotfilename = 'plot-%s.%s' % (counter, fmt) - _p_.save(filename=plotfilename, **kwargs)""") - - def _encode(self, d): - return 'session={0}&'.format(self._session) + urllib.urlencode(d) - - def _get_url(self, action, u): - with closing(urllib.urlopen(self._srv + '/simple/' + action + - '?' + u)) as h: - data = self._response.match(h.read()) - result = json.loads(data.group('header')) - result['output'] = data.group('output').rstrip() - return result - - def _get_file(self, fn, cell, ofn=None): - with closing(urllib.urlopen(self._srv + '/simple/' + 'file' + '?' + - self._encode({'cell': cell, 'file': fn}))) as h: - myfn = ofn if ofn else fn - data = h.read() - if not self._404.search(data): - with open(myfn, 'w') as f: - f.write(data) - else: - print('Remote server reported {0} could not be found:'.format( - fn)) - print(data) - def _do_cell(self, code): - realcode = self._codewrap.format(code) - result = self._get_url('compute', self._encode({'code': realcode})) - if result['status'] == 'computing': - cell = result['cell_id'] - while result['status'] == 'computing': - sys.stdout.write('working...') - sys.stdout.flush() - time.sleep(10) - result = self._get_url('status', self._encode({'cell': cell})) - if debug: - print('cell: <<<', realcode, '>>>', 'result: <<<', - result['output'], '>>>', sep='\n') - return result - - def do_inline(self, code): - return self._do_cell(' print(latex({0}))'.format(code)) - - def do_block(self, code): - result = self._do_cell(code) - for fn in result['files']: - self._get_file(fn, result['cell_id']) - return result - - def do_plot(self, num, code, plotdir): - result = self._do_cell(' __st_plot__({0}, {1})'.format(num, code)) - for fn in result['files']: - self._get_file(fn, result['cell_id'], os.path.join(plotdir, fn)) - return result - def close(self): - sys.stdout.write('Logging out of {0}...'.format(server)) - sys.stdout.flush() - self._get_url('logout', self._encode({})) - print('done') -def do_plot_setup(plotdir): - printc('initializing plots directory...') - if os.path.isdir(plotdir): - shutil.rmtree(plotdir) - os.mkdir(plotdir) - return True - -did_plot_setup = False -plotdir = 'sage-plots-for-' + jobname + '.tex' - -def labelline(n, s): - return r'\newlabel{@sageinline' + str(n) + '}{{' + s + '}{}{}{}{}}\n' - -def printc(s): - print(s, end='') - sys.stdout.flush() - -error = re.compile("(^" + traceback_str + ")|(^Syntax Error:)", re.MULTILINE) - -def check_for_error(string, line): - if error.search(string): - print(""" -**** Error in Sage code on line {0} of {1}.tex! -{2} -**** Running Sage on {1}.sage failed! Fix {1}.tex and try again.""".format( - line, jobname, string)) - sys.exit(1) -print('Processing Sage code for {0}.tex using remote Sage server.'.format( - jobname)) - -if login_info_file: - with open(login_info_file, 'r') as f: - print('Reading login information from {0}.'.format(login_info_file)) - get_val = lambda x: x.split('=')[1].strip().strip('\'"') - for line in f: - print(line) - if not line.startswith('#'): - if line.startswith('server') and not server: - server = get_val(line) - if line.startswith('username') and not username: - username = get_val(line) - if line.startswith('password') and not password: - password = get_val(line) - -if not server: - server = raw_input('Enter server: ') - -if not server.startswith('http'): - server = 'https://' + server - -if not username: - username = raw_input('Enter username: ') - -if not password: - from getpass import getpass - password = getpass('Please enter password for user {0} on {1}: '.format( - username, server)) - -printc('Parsing {0}.sage...'.format(jobname)) -cmds = parsedotsage(jobname + '.sage') -print('done.') - -sout = '% This file was *autogenerated* from the file {0}.sage.\n'.format( - os.path.splitext(jobname)[0]) - -printc('Logging into {0} and starting session...'.format(server)) -with closing(RemoteSage(server, username, password)) as sage: - print('done.') - for cmd in cmds: - if cmd['type'] == 'inline': - printc('Inline formula {0}...'.format(cmd['num'])) - result = sage.do_inline(cmd['code']) - check_for_error(result['output'], cmd['goboom']) - sout += labelline(cmd['num'], result['output']) - print('done.') - if cmd['type'] == 'block': - printc('Code block begin...') - result = sage.do_block(cmd['code']) - check_for_error(result['output'], cmd['goboom']) - print('end.') - if cmd['type'] == 'plot': - printc('Plot {0}...'.format(cmd['num'])) - if not did_plot_setup: - did_plot_setup = do_plot_setup(plotdir) - result = sage.do_plot(cmd['num'], cmd['code'], plotdir) - check_for_error(result['output'], cmd['goboom']) - print('done.') - if cmd['type'] == 'pause': - print(cmd['msg']) - if int(time.time()) % 2280 == 0: - printc('Unscheduled offworld activation; closing iris...') - time.sleep(1) - print('end.') - -with open(jobname + '.sage', 'r') as sagef: - h = hashlib.md5() - for line in sagef: - if (not line.startswith(' _st_.goboom') and - not line.startswith("print 'SageT")): - h.update(line) - sout += """%{0}% md5sum of corresponding .sage file -{1} (minus "goboom" and pause/unpause lines) -""".format(h.hexdigest(), '%') - -printc('Writing .sout file...') -with open(jobname + '.sout', 'w') as soutf: - soutf.write(sout) - print('done.') -print('Sage processing complete. Run LaTeX on {0}.tex again.'.format(jobname)) - diff --git a/Master/texmf-dist/doc/latex/sagetex/sagetex.py b/Master/texmf-dist/doc/latex/sagetex/sagetex.py deleted file mode 100644 index 576847894f7..00000000000 --- a/Master/texmf-dist/doc/latex/sagetex/sagetex.py +++ /dev/null @@ -1,124 +0,0 @@ -## -## This is file `sagetex.py', -## generated with the docstrip utility. -## -## The original source files were: -## -## sagetexpackage.dtx (with options: `python') -## py-and-sty.dtx (with options: `python') -## -## This is a generated file. It is part of the SageTeX package. -## -## Copyright (C) 2009 by Dan Drake <ddrake@member.ams.org> -## -## This program is free software: you can redistribute it and/or modify it -## under the terms of the GNU General Public License as published by the -## Free Software Foundation, either version 2 of the License, or (at your -## option) any later version. -## -## This program is distributed in the hope that it will be useful, but -## WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General -## Public License for more details. -## -## You should have received a copy of the GNU General Public License along -## with this program. If not, see <http://www.gnu.org/licenses/>. -## -__version__ = """ - [2009/06/17 v2.2.1 embedding Sage into LaTeX documents] -""" -import sys -if __name__ == "__main__": - print("""This file is part of the SageTeX package. -It is not meant to be called directly. - -This file will be automatically used by Sage scripts generated from a -LaTeX document using the SageTeX package.""") - sys.exit() -from sage.misc.latex import latex -import os -import os.path -import hashlib -import traceback -import subprocess -import shutil -class SageTeXProcessor(): - def __init__(self, jobname): - self.progress('Processing Sage code for %s.tex...' % jobname) - self.didinitplot = False - self.useimagemagick = False - self.useepstopdf = False - self.plotdir = 'sage-plots-for-' + jobname + '.tex' - self.filename = jobname - self.souttmp = open(self.filename + '.sout.tmp', 'w') - s = '% This file was *autogenerated* from the file ' + \ - os.path.splitext(jobname)[0] + '.sage.\n' - self.souttmp.write(s) - def progress(self, t,linebreak=True): - if linebreak: - print(t) - else: - sys.stdout.write(t) - sys.stdout.flush() - def initplot(self): - self.progress('Initializing plots directory') - if os.path.isdir(self.plotdir): - shutil.rmtree(self.plotdir) - os.mkdir(self.plotdir) - self.didinitplot = True - def inline(self, counter, s): - self.progress('Inline formula %s' % counter) - self.souttmp.write('\\newlabel{@sageinline' + str(counter) + '}{{' + \ - latex(s).rstrip() + '}{}{}{}{}}\n') - def blockbegin(self): - self.progress('Code block begin...', False) - def blockend(self): - self.progress('end') - def plot(self, counter, _p_, format='notprovided', **kwargs): - if not self.didinitplot: - self.initplot() - self.progress('Plot %s' % counter) - if format == 'notprovided': - formats = ['eps', 'pdf'] - else: - formats = [format] - for fmt in formats: - if fmt == 'pdf' and self.useepstopdf: - epsfile = os.path.join(self.plotdir, 'plot-%s.eps' % counter) - self.progress('Calling epstopdf to convert plot-%s.eps to PDF' % \ - counter) - subprocess.check_call(['epstopdf', epsfile]) - continue - plotfilename = os.path.join(self.plotdir, 'plot-%s.%s' % (counter, fmt)) - _p_.save(filename=plotfilename, **kwargs) - if format != 'notprovided' and self.useimagemagick: - self.progress('Calling Imagemagick to convert plot-%s.%s to EPS' % \ - (counter, format)) - self.toeps(counter, format) - def toeps(self, counter, ext): - subprocess.check_call(['convert',\ - '%s/plot-%s.%s' % (self.plotdir, counter, ext), \ - '%s/plot-%s.eps' % (self.plotdir, counter)]) - def goboom(self, line): - print('\n**** Error in Sage code on line %s of %s.tex! Traceback\ - follows.' % (line, self.filename)) - traceback.print_exc() - print('\n**** Running Sage on %s.sage failed! Fix %s.tex and try\ - again.' % ((self.filename,) * 2)) - self.souttmp.close() - os.remove(self.filename + '.sout.tmp') - sys.exit(int(1)) - def endofdoc(self): - sagef = open(self.filename + '.sage', 'r') - m = hashlib.md5() - for line in sagef: - if line[0:12] != " _st_.goboom" and line[0:12] != "print 'SageT": - m.update(line) - s = '%' + m.hexdigest() + '% md5sum of corresponding .sage file\ - (minus "goboom" and pause/unpause lines)\n' - self.souttmp.write(s) - self.souttmp.close() - os.rename(self.filename + '.sout.tmp', self.filename + '.sout') - self.progress('Sage processing complete. Run LaTeX on %s.tex again.' %\ - self.filename) - diff --git a/Master/texmf-dist/doc/latex/sagetex/sagetexpackage.pdf b/Master/texmf-dist/doc/latex/sagetex/sagetexpackage.pdf Binary files differdeleted file mode 100644 index 2f9fc546ecd..00000000000 --- a/Master/texmf-dist/doc/latex/sagetex/sagetexpackage.pdf +++ /dev/null diff --git a/Master/texmf-dist/doc/latex/sagetex/sagetexparse.py b/Master/texmf-dist/doc/latex/sagetex/sagetexparse.py deleted file mode 100644 index c1927348032..00000000000 --- a/Master/texmf-dist/doc/latex/sagetex/sagetexparse.py +++ /dev/null @@ -1,151 +0,0 @@ -## -## This is file `sagetexparse.py', -## generated with the docstrip utility. -## -## The original source files were: -## -## scripts.dtx (with options: `parsermod') -## -## This is a generated file. It is part of the SageTeX package. -## -## Copyright (C) 2009 by Dan Drake <ddrake@member.ams.org> -## -## This program is free software: you can redistribute it and/or modify it -## under the terms of the GNU General Public License as published by the -## Free Software Foundation, either version 2 of the License, or (at your -## option) any later version. -## -## This program is distributed in the hope that it will be useful, but -## WITHOUT ANY WARRANTY; without even the implied warranty of -## MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General -## Public License for more details. -## -## You should have received a copy of the GNU General Public License along -## with this program. If not, see <http://www.gnu.org/licenses/>. -## -import sys -from pyparsing import * -def skipToMatching(opener, closer): - nest = nestedExpr(opener, closer) - nest.setParseAction(lambda l, s, t: l[s:getTokensEndLoc()]) - return nest - -curlybrackets = skipToMatching('{', '}') -squarebrackets = skipToMatching('[', ']') -sagemacroparser = r'\sage' + curlybrackets('code') -sageplotparser = (r'\sageplot' - + Optional(squarebrackets)('opts') - + Optional(squarebrackets)('format') - + curlybrackets('code')) -sagetexpause = Literal(r'\sagetexpause') -sagetexunpause = Literal(r'\sagetexunpause') -class SoutParser(): - def __init__(self, fn): - self.label = [] - parselabel = (r'\newlabel{@sageinline' - + Word(nums)('num') - + '}{' - + curlybrackets('result') - + '{}{}{}{}}') - parselabel.ignore('%' + restOfLine) - parselabel.setParseAction(self.newlabel) - try: - OneOrMore(parselabel).parseFile(fn) - except IOError: - print 'Error accessing %s; exiting. Does your .sout file exist?' % fn - sys.exit(1) - def newlabel(self, s, l, t): - self.label.append(t.result[1:-1]) -class DeSageTex(): - def __init__(self, fn): - self.sagen = 0 - self.plotn = 0 - self.fn = fn - self.sout = SoutParser(fn + '.sout') - smacro = sagemacroparser - smacro.setParseAction(self.sage) - usepackage = (r'\usepackage' - + Optional(squarebrackets) - + '{sagetex}') - usepackage.setParseAction(replaceWith(r"""% "\usepackage{sagetex}" line was here: -\RequirePackage{verbatim} -\RequirePackage{graphicx} -\newcommand{\sagetexpause}{\relax} -\newcommand{\sagetexunpause}{\relax}""")) - splot = sageplotparser - splot.setParseAction(self.plot) - beginorend = oneOf('begin end') - blockorverb = 'sage' + oneOf('block verbatim') - blockorverb.setParseAction(replaceWith('verbatim')) - senv = '\\' + beginorend + '{' + blockorverb + '}' - silent = Literal('sagesilent') - silent.setParseAction(replaceWith('comment')) - ssilent = '\\' + beginorend + '{' + silent + '}' - stexindent = Suppress(r'\setlength{\sagetexindent}' + curlybrackets) - doit = smacro | senv | ssilent | usepackage | splot | stexindent - doit.ignore('%' + restOfLine) - doit.ignore(r'\begin{verbatim}' + SkipTo(r'\end{verbatim}')) - doit.ignore(r'\begin{comment}' + SkipTo(r'\end{comment}')) - doit.ignore(r'\sagetexpause' + SkipTo(r'\sagetexunpause')) - str = ''.join(open(fn + '.tex', 'r').readlines()) - self.result = doit.transformString(str) - def sage(self, s, l, t): - self.sagen += 1 - return self.sout.label[self.sagen - 1] - def plot(self, s, l, t): - self.plotn += 1 - if len(t.opts) == 0: - opts = r'[width=.75\textwidth]' - else: - opts = t.opts[0] - return (r'\includegraphics%s{sage-plots-for-%s.tex/plot-%s}' % - (opts, self.fn, self.plotn - 1)) -class SageCodeExtractor(): - def __init__(self, fn): - smacro = sagemacroparser - smacro.setParseAction(self.macroout) - - splot = sageplotparser - splot.setParseAction(self.plotout) - env_names = oneOf('sageblock sageverbatim sagesilent') - senv = r'\begin{' + env_names('env') + '}' + SkipTo( - r'\end{' + matchPreviousExpr(env_names) + '}')('code') - senv.leaveWhitespace() - senv.setParseAction(self.envout) - - spause = sagetexpause - spause.setParseAction(self.pause) - - sunpause = sagetexunpause - sunpause.setParseAction(self.unpause) - - doit = smacro | splot | senv | spause | sunpause - - str = ''.join(open(fn + '.tex', 'r').readlines()) - self.result = '' - - doit.transformString(str) - - def macroout(self, s, l, t): - self.result += '# \\sage{} from line %s\n' % lineno(l, s) - self.result += t.code[1:-1] + '\n\n' - - def plotout(self, s, l, t): - self.result += '# \\sageplot{} from line %s:\n' % lineno(l, s) - if t.format is not '': - self.result += '# format: %s' % t.format[0][1:-1] + '\n' - self.result += t.code[1:-1] + '\n\n' - - def envout(self, s, l, t): - self.result += '# %s environment from line %s:' % (t.env, - lineno(l, s)) - self.result += t.code[0] + '\n' - - def pause(self, s, l, t): - self.result += ('# SageTeX (probably) paused on input line %s.\n\n' % - (lineno(l, s))) - - def unpause(self, s, l, t): - self.result += ('# SageTeX (probably) unpaused on input line %s.\n\n' % - (lineno(l, s))) - diff --git a/Master/texmf-dist/source/latex/sagetex/py-and-sty.dtx b/Master/texmf-dist/source/latex/sagetex/py-and-sty.dtx deleted file mode 100644 index 3798ec58547..00000000000 --- a/Master/texmf-dist/source/latex/sagetex/py-and-sty.dtx +++ /dev/null @@ -1,907 +0,0 @@ -% \section{Implementation} -% \label{sec:implementation} -% -% There are two pieces to this package: a \LTX style file, and a -% Python module. They are mutually interdependent, so it makes sense to -% document them both here. -% -% \subsection{The style file} -% \label{sec:sty-file} -% -% \iffalse -% tell docstrip to put code into the .sty file -%<*latex> -% \fi -% -% All macros and counters intended for use internal to this package -% begin with ``|ST@|''. -% -% \subsubsection{Initialization} -% -% Let's begin by loading some packages. The key bits of |sageblock| and -% friends are stol---um, adapted from the |verbatim| package manual. So -% grab the |verbatim| package. -% \begin{macrocode} -\RequirePackage{verbatim} -% \end{macrocode} -% Unsurprisingly, the |\sageplot| command works poorly without graphics -% support. -% \begin{macrocode} -\RequirePackage{graphicx} -% \end{macrocode} -% The |makecmds| package gives us a |\provideenvironment| which we need, -% and we use |ifpdf| and |ifthen| in |\sageplot| so we know what kind of -% files to look for. -% \begin{macrocode} -\RequirePackage{makecmds} -\RequirePackage{ifpdf} -\RequirePackage{ifthen} -% \end{macrocode} -% -% Next set up the counters, default indent, and flags. -% \begin{macrocode} -\newcounter{ST@inline} -\newcounter{ST@plot} -\setcounter{ST@inline}{0} -\setcounter{ST@plot}{0} -\newlength{\sagetexindent} -\setlength{\sagetexindent}{5ex} -\newif\ifST@paused -\ST@pausedfalse -% \end{macrocode} -% Set up the file stuff, which will get run at the beginning of the -% document, after we know what's happening with the |final| option. -% First, we open the |.sage| file: -% \begin{macrocode} -\AtBeginDocument{\@ifundefined{ST@final}{% -\newwrite\ST@sf% -\immediate\openout\ST@sf=\jobname.sage% -% \end{macrocode} -% \begin{macro}{\ST@wsf} -% We will write a lot of stuff to that file, so make a convenient -% abbreviation, then use it to put the initial commands into the -% |.sage| file. The hash mark below gets doubled when written to the -% file, for some obscure reason related to parameter expansion. It's -% valid Python, though, so I haven't bothered figuring out how to get -% a single hash. We are assuming that the extension is |.tex|; see the -% |initplot| documentation on page~\pageref{initplot} for discussion -% of file extensions. The ``|(\jobname.sage)|'' business is there -% because the comment below will get pulled into the autogenerated -% |.py| file (second order autogeneration!) and I'd like to reduce -% possible confusion if someone is looking around in those files. -% \begin{macrocode} -\newcommand{\ST@wsf}[1]{\immediate\write\ST@sf{#1}}% -\ST@wsf{# This file (\jobname.sage) was *autogenerated* from the file \jobname.tex.}% -\ST@wsf{import sagetex}% -\ST@wsf{_st_ = sagetex.SageTeXProcessor('\jobname')}}% -% \end{macrocode} -% On the other hand, if the |ST@final| flag is set, don't bother with -% any of the file stuff, and make |\ST@wsf| a no-op. -% \begin{macrocode} -{\newcommand{\ST@wsf}[1]{\relax}}} -% \end{macrocode} -% \end{macro} -% Now we declare our options, which mostly just set flags that we check -% at the beginning of the document, and when running the |.sage| file. -% \changes{v2.0}{2008/04/04}{Add \texttt{epstopdf} option} -% \changes{v2.0}{2008/12/16}{Add \texttt{final} option} -% -% The |final| option controls whether or not we write the |.sage| file; -% the |imagemagick| and |epstopdf| options both want to write something -% to that same file. So we put off all the actual file stuff until the -% beginning of the document---by that time, we'll have processed the -% |final| option (or not) and can check the |\ST@final| flag to see what -% to do. (We must do this because we can't specify code that runs if an -% option \emph{isn't} defined.) -% -% For |final|, we set a flag for other guys to check, and if there's no -% |.sout| file, we warn the user that something fishy is going on. -% \begin{macrocode} -\DeclareOption{final}{% - \newcommand{\ST@final}{x}% - \IfFileExists{\jobname.sout}{}{\AtEndDocument{\PackageWarningNoLine{sagetex}% - {`final' option provided, but \jobname.sout^^Jdoesn't exist! No Sage - input will appear in your document. Remove the `final'^^Joption and - rerun LaTeX on your document}}}} -% \end{macrocode} -% For |imagemagick|, we set two flags: one for \LTX and one for Sage. -% It's important that we set |ST@useimagmagick| \emph{before} the -% beginning of the document, so that the graphics commands can check -% that. We do wait until the beginning of the document to do file -% writing stuff. -% \begin{macrocode} -\DeclareOption{imagemagick}{% - \newcommand{\ST@useimagemagick}{x}% - \AtBeginDocument{% - \@ifundefined{ST@final}{% - \ST@wsf{_st_.useimagemagick = True}}{}}} -% \end{macrocode} -% For |epstopdf|, we just set a flag for Sage. Then, process the options. -% \begin{macrocode} -\DeclareOption{epstopdf}{% -\AtBeginDocument{% -\@ifundefined{ST@final}{% - \ST@wsf{_st_.useepstopdf = True}}{}}} -\ProcessOptions\relax -% \end{macrocode} -% The |\relax| is a little incantation suggested by the ``\LaTeXe{} for -% class and package writers'' manual, section 4.7. -% -% Pull in the |.sout| file if it exists, or do nothing if it doesn't. I -% suppose we could do this inside an |AtBeginDocument| but I don't see -% any particular reason to do that. It will work whenever we load it. If -% the |.sout| file isn't found, print the usual \TeX-style message. This -% allows programs -% (\href{http://www.phys.psu.edu/~collins/software/latexmk-jcc/}{\texttt{Latexmk}}, for example) -% that read the |.log| file or terminal output to detect -% the need for another typesetting run to do so. If the ``\texttt{No -% file foo.sout}'' line doesn't work for some software package, please -% let me know and I can change it to use |PackageInfo| or whatever. -% \begin{macrocode} -\InputIfFileExists{\jobname.sout}{}{\typeout{No file \jobname.sout.}} -% \end{macrocode} -% \changes{v2.1.1}{2009/05/14}{Add typeout if .sout file not found} -% -% The user might load the |hyperref| package after this one (indeed, the -% |hyperref| documentation insists that it be loaded last) or not at -% all---so when we hit the beginning of the document, provide a dummy -% |NoHyper| environment if one hasn't been defined by the |hyperref| -% package. We need this for the |\sage| macro below. -% \begin{macrocode} -\AtBeginDocument{\provideenvironment{NoHyper}{}{}} -% \end{macrocode} -% -% \subsubsection{The \texttt{\protect\bslash sage} macro} -% \label{sec:sagemacro} -% -% \begin{macro}{\sage} -% This macro combines |\ref|, |\label|, and Sage all at once. First, we -% use Sage to get a \LTX representation of whatever you give this -% function. The Sage script writes a |\newlabel| line into the |.sout| -% file, and we read the output using the |\ref| command. Usually, |\ref| -% pulls in a section or theorem number, but it will pull in arbitrary -% text just as well. -% -% The first thing it does it write its argument into the |.sage| file, -% along with a counter so we can produce a unique label. We wrap a -% try/except around the function call so that we can provide a more -% helpful error message in case something goes wrong. (In particular, we -% can tell the user which line of the |.tex| file contains the offending -% code.) We can use |^^J| to put linebreaks into the |.sage| file, but -% \LTX wants to put a space after that, which is why we don't put the -% ``except'' on its own line here in the source. -% \begin{macrocode} -\newcommand{\sage}[1]{\ST@wsf{% -try:^^J - _st_.inline(\theST@inline, #1)^^Jexcept:^^J - _st_.goboom(\the\inputlineno)}% -% \end{macrocode} -% The |inline| function of the Python module is documented on page -% \pageref{inlinefn}. Back in \LTX-land: if paused, say so. -% \begin{macrocode} -\ifST@paused - \mbox{(Sage\TeX{} is paused)}% -% \end{macrocode} -% Otherwise\ldots our use of |\newlabel| and |\ref| seems awfully clever -% until you load the |hyperref| package, which gleefully tries to -% hyperlink the hell out of everything. This is great until it hits one -% of our special |\newlabel|s and gets deeply confused. Fortunately the -% |hyperref| folks are willing to accomodate people like us, and give us -% a |NoHyper| environment. -% \begin{macrocode} -\else - \begin{NoHyper}\ref{@sageinline\theST@inline}\end{NoHyper} -% \end{macrocode} -% Now check if the label has already been defined. (The internal -% implementation of labels in \LTX involves defining a macro called -% ``|r@@labelname|''.) If it hasn't, we set a flag so that we can tell -% the user to run Sage on the |.sage| file at the end of the run. -% \begin{macrocode} - \@ifundefined{r@@sageinline\theST@inline}{\gdef\ST@rerun{x}}{} -\fi -% \end{macrocode} -% In any case, the last thing to do is step the counter. -% \begin{macrocode} -\stepcounter{ST@inline}} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\percent} -% A macro that inserts a percent sign. This is more-or-less stolen from the -% \textsf{Docstrip} manual; there they change the catcode inside a group -% and use |gdef|, but here we try to be more \LaTeX y and use -% |\newcommand|. -% \begin{macrocode} -\catcode`\%=12 -\newcommand{\percent}{%} -\catcode`\%=14 -% \end{macrocode} -% \end{macro} -% -% \subsubsection{The \texttt{\protect\bslash sageplot} macro and friends} -% \label{sec:sageplotmacro} -% -% Plotting is rather more complicated, and requires several helper -% macros that accompany |\sageplot|. -% -% \begin{macro}{\ST@plotdir} -% A little abbreviation for the plot directory. We don't use -% |\graphicspath| because it's -% \href{http://www.tex.ac.uk/cgi-bin/texfaq2html?label=graphicspath}{ -% apparently slow}---also, since we know right where our plots are -% going, no need to have \LTX looking for them. -% \begin{macrocode} -\newcommand{\ST@plotdir}{sage-plots-for-\jobname.tex} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\ST@missingfilebox} -% The code that makes the ``file not found'' box. This shows up in a -% couple places below, so let's just define it once. -% \begin{macrocode} -\newcommand{\ST@missingfilebox}{\framebox[2cm]{\rule[-1cm]{0cm}{2cm}\textbf{??}}} -% \end{macrocode} -% \end{macro} -% \begin{macro}{\sageplot} -% \changes{v1.3}{2008/03/08}{Iron out warnings, cool \TikZ flowchart} -% This function is similar to |\sage|. The neat thing that we take -% advantage of is that commas aren't special for arguments to \LTX -% commands, so it's easy to capture a bunch of keyword arguments that -% get passed right into a Python function. -% -% This macro has two optional arguments, which can't be defined using -% \LTX's |\newcommand|; we use Scott Pakin's brilliant -% \href{http://tug.ctan.org/tex-archive/support/newcommand/}{|newcommand|} -% package to create this macro; the options I fed to his script were -% similar to this: -%\begin{center} -% |MACRO sageplot OPT[#1={width}] OPT[#2={notprovided}] #3| -%\end{center} -% Observe that we are using a Python script to write \LTX code which -% writes Python code which writes \LTX code. Crazy! -% -% Here's the wrapper command which does whatever magic we need to get -% two optional arguments. -% \begin{macrocode} -\newcommand{\sageplot}[1][width=.75\textwidth]{% - \@ifnextchar[{\ST@sageplot[#1]}{\ST@sageplot[#1][notprovided]}} -% \end{macrocode} -% The first optional argument |#1| will get shoved right into the -% optional argument for |\includegraphics|, so the user has easy control -% over the \LTX aspects of the plotting. We define a default size of -% $3/4$ the textwidth, which seems reasonable. (Perhaps a future version -% of \ST will allow the user to specify in the package options a set of -% default options to be used throughout.) The second optional argument -% |#2| is the file format and allows us to tell what files to look for. -% It defaults to ``notprovided'', which tells the Python module to -% create EPS and PDF files. Everything in |#3| gets put into the Python -% function call, so the user can put in keyword arguments there which -% get interpreted correctly by Python. -% -% \begin{macro}{\ST@sageplot} -% \changes{v2.0}{2008/12/16}{Change to use only keyword arguments: see issue -% 2 on bitbucket tracker} -% Let's see the real code here. We write a couple lines to the |.sage| -% file, including a counter, input line number, and all of the mandatory -% argument; all this is wrapped in another try/except. -% \begin{macrocode} -\def\ST@sageplot[#1][#2]#3{\ST@wsf{try:^^J - _st_.plot(\theST@plot, format='#2', _p_=#3)^^Jexcept:^^J - _st_.goboom(\the\inputlineno)}% -% \end{macrocode} -% The Python |plot| function is documented on page~\pageref{plotfn}. -% -% Now we include the appropriate graphics file. Because the user might -% be producing DVI or PDF files, and have supplied a file format or not, -% and so on, the logic we follow is a bit complicated. -% \autoref{f:sageplottree} shows what we do; for completeness---and -% because I think drawing trees with \TikZ is really cool---we show what -% |\ST@inclgrfx| does in \autoref{f:stig}. This entire complicated -% business is intended to avoid doing an |\includegraphics| command on a -% file that doesn't exist, and to issue warnings appropriate to the -% situation. -% -% \begin{figure} -% \centering -% \begin{tikzpicture} -% \tikzstyle{level 1}=[sibling distance=6cm] -% \tikzstyle{level 2}=[sibling distance=3cm] -% \node [box] {DVI or PDF?} -% child {node [box] {Format provided?} -% child {node [box] {STig EPS} -% edge from parent node[left] {no}} -% child {node [box] {IM option set?} -% child {node [box, text width=3cm] {Warn that DVI + PNG = bad} -% edge from parent node[left] {no}} -% child {node [box] {STig EPS} -% edge from parent node[right] {yes}} -% edge from parent node[right] {yes}} -% edge from parent node[left] {DVI}} -% child {node [box] {Format provided?} -% child {node [box] {STig PDF} -% edge from parent node[left] {no}} -% child {node [box] {STig \texttt{\#2}} -% edge from parent node[right] {yes}} -% edge from parent node[right] {PDF}}; -% \end{tikzpicture} -% \caption{The logic tree that \texttt{\bslash sageplot} uses to -% decide whether to run \texttt{\bslash includegraphics} or to yell at -% the user. ``Format'' is the \texttt{\#2} argument to \texttt{\bslash -% sageplot}, ``STig ext'' -% means a call to \texttt{\bslash ST@inclgrfx} with ``ext'' as the -% second argument, and ``IM'' is Imagemagick.} -% \label{f:sageplottree} -% \end{figure} -% -% If we are creating a PDF, we check to see if the user asked for a -% different format, and use that if necessary: -% \begin{macrocode} -\ifpdf - \ifthenelse{\equal{#2}{notprovided}}% - {\ST@inclgrfx{#1}{pdf}}% - {\ST@inclgrfx{#1}{#2}}% -% \end{macrocode} -% Otherwise, we are creating a DVI file, which only supports EPS. If the -% user provided a format anyway, don't include the file (since it won't -% work) and warn the user about this. (Unless the file doesn't exist, in -% which case we do the same thing that |\ST@inclgrfx| does.) -% \begin{macrocode} -\else - \ifthenelse{\equal{#2}{notprovided}}% - {\ST@inclgrfx{#1}{eps}}% -% \end{macrocode} -% If a format is provided, we check to see if we're using the -% imagemagick option. If not, we're going to issue some sort of warning, -% depending on whether the file exists yet or not. -% \begin{macrocode} - {\@ifundefined{ST@useimagemagick}% - {\IfFileExists{\ST@plotdir/plot-\theST@plot.#2}% - {\ST@missingfilebox% - \PackageWarning{sagetex}{Graphics file - \ST@plotdir/plot-\theST@plot.#2\space on page \thepage\space - cannot be used with DVI output. Use pdflatex or create an EPS - file. Plot command is}}% - {\ST@missingfilebox% - \PackageWarning{sagetex}{Graphics file - \ST@plotdir/plot-\theST@plot.#2\space on page \thepage\space - does not exist. Plot command is}% - \gdef\ST@rerun{x}}}% -% \end{macrocode} -% Otherwise, we are using Imagemagick, so try to include an EPS file -% anyway. -% \begin{macrocode} - {\ST@inclgrfx{#1}{eps}}}% -\fi -% \end{macrocode} -% Step the counter and we're done with the usual work. -% \begin{macrocode} -\stepcounter{ST@plot}} -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{\ST@inclgrfx} -% This command includes the requested graphics file (|#2| is the -% extension) with the requested options (|#1|) if the file exists. Note -% that it just needs to know the extension, since we use a counter for -% the filename. If we are paused, it just puts in a little box saying -% so. -% \begin{macrocode} -\newcommand{\ST@inclgrfx}[2]{\ifST@paused - \fbox{\rule[-1cm]{0cm}{2cm}Sage\TeX{} is paused; no graphic} -\else - \IfFileExists{\ST@plotdir/plot-\theST@plot.#2}% - {\includegraphics[#1]{\ST@plotdir/plot-\theST@plot.#2}}% -% \end{macrocode} -% If the file doesn't exist, we insert a little box to indicate it -% wasn't found, issue a warning that we didn't find a graphics file, -% then set a flag that, at the end of the run, tells the user to run -% Sage again. -% \begin{macrocode} - {\ST@missingfilebox% - \PackageWarning{sagetex}{Graphics file - \ST@plotdir/plot-\theST@plot.#2\space on page \thepage\space does not - exist. Plot command is}% - \gdef\ST@rerun{x}} -\fi} -% \end{macrocode} -% \autoref{f:stig} makes this a bit clearer. -% \begin{figure} -% \centering -% \begin{tikzpicture} -% \tikzstyle{level 1}=[sibling distance=4cm] -% \node [box] {Paused?} -% child {node [box] {Insert ``we're paused'' box} -% edge from parent node[left] {yes}} -% child {node [box] {Does EXT file exist?} -% child {node [box, text width = 2.125cm] {Warn user to rerun Sage} -% edge from parent node[left] {no}} -% child {node [box] {Use \texttt{includegraphics}} -% edge from parent node[right] {yes}} -% edge from parent node[right] {no}}; -% \end{tikzpicture} -% \caption{The logic used by the \texttt{\bslash ST@inclgrfx} -% command.} -% \label{f:stig} -% \end{figure} -% \end{macro} -% -% \subsubsection{Verbatim-like environments} -% \label{sec:verbatim-envs} -% -% \begin{macro}{\ST@beginsfbl} -% This is ``begin |.sage| file block'', an internal-use abbreviation -% that sets things up when we start writing a chunk of Sage code to -% the |.sage| file. It begins with some \TeX{} magic that fixes -% spacing, then puts the start of a try/except block in the |.sage| -% file---this not only allows the user to indent code without -% Sage/Python complaining about indentation, but lets us tell the user -% where things went wrong. The |blockbegin| and |blockend| functions -% are documented on page~\pageref{blocksbeginend}. The last bit is some -% magic from the |verbatim| package manual that makes \LTX respect -% line breaks. -% \begin{macrocode} -\newcommand{\ST@beginsfbl}{% - \@bsphack\ST@wsf{% -_st_.blockbegin()^^Jtry:}% - \let\do\@makeother\dospecials\catcode`\^^M\active} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{\ST@endsfbl} -% The companion to |\ST@beginsfbl|. -% \begin{macrocode} -\newcommand{\ST@endsfbl}{% -\ST@wsf{except:^^J - _st_.goboom(\the\inputlineno)^^J_st_.blockend()}} -% \end{macrocode} -% \end{macro} -% -% Now let's define the ``verbatim-like'' environments. There are four -% possibilities, corresponding to the two independent choices of -% typesetting the code or not, and writing to the |.sage| file or not. -% -% \begin{environment}{sageblock} -% This environment does both: it typesets your code and puts it into the -% |.sage| file for execution by Sage. -% \begin{macrocode} -\newenvironment{sageblock}{\ST@beginsfbl% -% \end{macrocode} -% The space between |\ST@wsf{| and |\the| is crucial! It, along with the -% ``|try:|'', is what allows the user to indent code if they like. This -% line sends stuff to the |.sage| file. -% \begin{macrocode} -\def\verbatim@processline{\ST@wsf{ \the\verbatim@line}% -% \end{macrocode} -% Next, we typeset your code and start the verbatim environment. -% \begin{macrocode} -\hspace{\sagetexindent}\the\verbatim@line\par}% -\verbatim}% -% \end{macrocode} -% At the end of the environment, we put a chunk into the |.sage| file -% and stop the verbatim environment. -% \begin{macrocode} -{\ST@endsfbl\endverbatim} -% \end{macrocode} -% \end{environment} -% -% \begin{environment}{sagesilent} -% This is from the |verbatim| package manual. It's just like the above, -% except we don't typeset anything. -% \begin{macrocode} -\newenvironment{sagesilent}{\ST@beginsfbl% -\def\verbatim@processline{\ST@wsf{ \the\verbatim@line}}% -\verbatim@start}% -{\ST@endsfbl\@esphack} -% \end{macrocode} -% \end{environment} -% -% \begin{environment}{sageverbatim} -% The opposite of |sagesilent|. This is exactly the same as the verbatim -% environment, except that we include some indentation to be consistent -% with other typeset Sage code. -% \begin{macrocode} -\newenvironment{sageverbatim}{% -\def\verbatim@processline{\hspace{\sagetexindent}\the\verbatim@line\par}% -\verbatim}% -{\endverbatim} -% \end{macrocode} -% \end{environment} -% -% Logically, we now need an environment which neither typesets -% \emph{nor} writes code to the |.sage| file. The verbatim package's -% |comment| environment does that.\\ -% -% \subsubsection{Pausing \ST} -% \label{sec:pausing-sagetex} -% -% How can one have Sage to stop processing \ST output for a little -% while, and then start again? At first I thought I would need some sort -% of ``goto'' statement in Python, but later realized that there's a -% dead simple solution: write triple quotes to the |.sage| file to -% comment out the code. Okay, so this isn't \emph{really} commenting out -% the code; PEP 8 says block comments should use ``|#|'' and Sage will -% read in the ``commented-out'' code as a string literal. For the -% purposes of \ST, I think this is a good decision, though, since (1) -% the pausing mechanism is orthogonal to everything else, which makes it -% easier to not screw up other code, and (2) it will always work. -% -% This illustrates what I really like about \ST: it mixes \LTX and -% Sage/Python, and often what is difficult or impossible in one system -% is trivial in the other. -% -% \begin{macro}{sagetexpause} -% This macro pauses \ST by effectively commenting out code in the -% |.sage| file. When running the corresponding |.sage| file, Sage will -% skip over any commands issued while \ST is paused. -% \begin{macrocode} -\newcommand{\sagetexpause}{\ifST@paused\relax\else -\ST@wsf{print 'SageTeX paused on \jobname.tex line \the\inputlineno'^^J"""} -\ST@pausedtrue -\fi} -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{sagetexunpause} -% This is the obvious companion to |\sagetexpause|. -% \begin{macrocode} -\newcommand{\sagetexunpause}{\ifST@paused -\ST@wsf{"""^^Jprint 'SageTeX unpaused on \jobname.tex line \the\inputlineno'} -\ST@pausedfalse -\fi} -% \end{macrocode} -% \end{macro} -% -% \subsubsection{End-of-document cleanup} -% \label{sec:end-of-doc-cleanup} -% -% We tell the Sage script to write some information to the |.sout| file, -% then check to see if |ST@rerun| ever got defined. If not, all the -% inline formulas and plots worked, so do nothing. We check to see if -% we're paused first, so that we can finish the triple-quoted string in -% the |.sage| file. -% \begin{macrocode} -\AtEndDocument{\ifST@paused -\ST@wsf{"""^^Jprint 'SageTeX unpaused at end of \jobname.tex'} -\fi -\ST@wsf{_st_.endofdoc()}% -\@ifundefined{ST@rerun}{}% -% \end{macrocode} -% Otherwise, we issue a warning to tell the user to run Sage on the -% |.sage| file. Part of the reason we do this is that, by using |\ref| -% to pull in the inlines, \LTX will complain about undefined references -% if you haven't run the Sage script---and for many \LTX users, myself -% included, the warning ``there were undefined references'' is a signal -% to run \LTX again. But to fix these particular undefined references, -% you need to run \emph{Sage}. We also suppressed file-not-found errors -% for graphics files, and need to tell the user what to do about that. -% -% At any rate, we tell the user to run Sage if it's necessary. -% \begin{macrocode} -{\PackageWarningNoLine{sagetex}{There were undefined Sage formulas -and/or plots.^^JRun Sage on \jobname.sage, and then run -LaTeX on \jobname.tex again}}} -% \end{macrocode} -% -% -% \subsection{The Python module} -% \label{sec:py-file} -% -% \iffalse -% Hey, docstrip! Stop putting code into the .sty file, and start -% putting it into the .py file. -%</latex> -%<*python> -% Thanks. -% \fi -% -% The style file writes things to the |.sage| file and reads them from -% the |.sout| file. The Python module provides functions that help -% produce the |.sout| file from the |.sage| file. -% -% \paragraph{A note on Python and \textsf{Docstrip}} There is one tiny -% potential source of confusion when documenting Python code with -% \textsf{Docstrip}: the percent sign. If you have a long line of Python -% code which includes a percent sign for string formatting and you break -% the line with a backslash and begin the next line with a percent sign, -% that line \emph{will not} be written to the output file. This is only -% a problem if you \emph{begin} the line with a (single) percent sign; -% there are no troubles otherwise.\\ -% -% On to the code: the |sagetex.py| file is intended to be used as a -% module and doesn't do anything useful when called directly, so if -% someone does that, warn them. We do this right away so that we print -% this and exit before trying to import any Sage modules; that way, this -% error message gets printed whether you run the script with Sage or -% with Python. -% \begin{macrocode} -import sys -if __name__ == "__main__": - print("""This file is part of the SageTeX package. -It is not meant to be called directly. - -This file will be automatically used by Sage scripts generated from a -LaTeX document using the SageTeX package.""") - sys.exit() -% \end{macrocode} -% Import what we need: -% \begin{macrocode} -from sage.misc.latex import latex -import os -import os.path -import hashlib -import traceback -import subprocess -import shutil -% \end{macrocode} -% We define a class so that it's a bit easier to carry around internal -% state. We used to just have some global variables and a bunch of -% functions, but this seems a bit nicer and easier. -% \begin{macrocode} -class SageTeXProcessor(): - def __init__(self, jobname): - self.progress('Processing Sage code for %s.tex...' % jobname) - self.didinitplot = False - self.useimagemagick = False - self.useepstopdf = False - self.plotdir = 'sage-plots-for-' + jobname + '.tex' - self.filename = jobname -% \end{macrocode} -% Open a |.sout.tmp| file and write all our output to that. Then, when -% we're done, we move that to |.sout|. The ``autogenerated'' line is -% basically the same as the lines that get put at the top of preparsed -% Sage files; we are automatically generating a file with Sage, so it -% seems reasonable to add it. -% \begin{macrocode} - self.souttmp = open(self.filename + '.sout.tmp', 'w') - s = '% This file was *autogenerated* from the file ' + \ - os.path.splitext(jobname)[0] + '.sage.\n' - self.souttmp.write(s) -% \end{macrocode} -% -% \begin{macro}{progress} -% This function just prints stuff. It allows us to not print a -% linebreak, so you can get ``|start...|'' (little time spent -% processing) ``|end|'' on one line. -% \begin{macrocode} - def progress(self, t,linebreak=True): - if linebreak: - print(t) - else: - sys.stdout.write(t) - sys.stdout.flush() -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{initplot} -% \phantomsection\label{initplot} -% We only want to create the plots directory if the user actually plots -% something. This function creates the directory and sets the -% |didinitplot| flag after doing so. We make a directory based on the -% \LTX file being processed so that if there are multiple |.tex| files -% in a directory, we don't overwrite plots from another file. -% \begin{macrocode} - def initplot(self): - self.progress('Initializing plots directory') -% \end{macrocode} -% We hard-code the |.tex| extension, which is fine in the overwhelming -% majority of cases, although it does cause minor confusion when -% building the documentation. If it turns out lots of people use, say, a -% |ltx| extension or whatever, We could find out the correct extension, -% but it would involve a lot of irritating mucking around---on -% |comp.text.tex|, the best solution I found for finding the file -% extension is to look through the |.log| file. -% \begin{macrocode} - if os.path.isdir(self.plotdir): - shutil.rmtree(self.plotdir) - os.mkdir(self.plotdir) - self.didinitplot = True -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{inline} -% \phantomsection\label{inlinefn} -% This function works with |\sage| from the style file (see -% \autoref{sec:sagemacro}) to put Sage output into your \LTX file. -% Usually, when you use |\label|, it writes a line such as -% \begin{center} -% |\newlabel{labelname}{{section number}{page number}}| -% \end{center} -% to the |.aux| file. When you use the |hyperref| package, there are -% more fields in the second argument, but the first two are the same. -% The |\ref| command just pulls in what's in the first field of the -% second argument, so we can hijack this mechanism for our own nefarious -% purposes. The function writes a |\newlabel| line with a label made -% from a counter and the text from running Sage on |s|. -% -% We print out the line number so if something goes wrong, the user can -% more easily track down the offending |\sage| command in the source -% file. -% -% That's a lot of explanation for a very short function: -% \begin{macrocode} - def inline(self, counter, s): - self.progress('Inline formula %s' % counter) - self.souttmp.write('\\newlabel{@sageinline' + str(counter) + '}{{' + \ - latex(s).rstrip() + '}{}{}{}{}}\n') -% \end{macrocode} -% We are using five fields, just like |hyperref| does, because that -% works whether or not |hyperref| is loaded. Using two fields, as in -% plain \LTX, doesn't work if |hyperref| is loaded. -% \end{macro} -% -% \begin{macro}{blockbegin} -% \begin{macro}{blockend} -% \phantomsection\label{blocksbeginend} -% This function and its companion used to write stuff to the |.sout| -% file, but now they just update the user on our progress evaluating a -% code block. The verbatim-like environments of -% \autoref{sec:verbatim-envs} use these functions. -% \begin{macrocode} - def blockbegin(self): - self.progress('Code block begin...', False) - def blockend(self): - self.progress('end') -% \end{macrocode} -% \end{macro} -% \end{macro} -% -% \begin{macro}{plot} -% \phantomsection\label{plotfn} -% I hope it's obvious that this function does plotting. It's the Python -% counterpart of |\ST@sageplot| described in \autoref{sec:sageplotmacro}. As -% mentioned in the |\sageplot| code, we're taking advantage of two -% things: first, that \LTX doesn't treat commas and spaces in macro -% arguments specially, and second, that Python (and Sage plotting -% functions) has nice support for keyword arguments. The |#3| argument -% to |\sageplot| becomes |_p_| and |**kwargs| below. -% \begin{macrocode} - def plot(self, counter, _p_, format='notprovided', **kwargs): - if not self.didinitplot: - self.initplot() - self.progress('Plot %s' % counter) -% \end{macrocode} -% If the user says nothing about file formats, we default to producing -% PDF and EPS. This allows the user to transparently switch between -% using a DVI previewer (which usually automatically updates when the -% DVI changes, and has support for source specials, which makes the -% writing process easier) and making PDFs.\footnote{Yes, there's -% \texttt{pdfsync}, but full support for that is still rare in Linux, so -% producing EPS and PDF is the best solution for now.} -% \begin{macrocode} - if format == 'notprovided': - formats = ['eps', 'pdf'] - else: - formats = [format] - for fmt in formats: -% \end{macrocode} -% If we're making a PDF and have been told to use |epstopdf|, do so, -% then skip the rest of the loop. -% \begin{macrocode} - if fmt == 'pdf' and self.useepstopdf: - epsfile = os.path.join(self.plotdir, 'plot-%s.eps' % counter) - self.progress('Calling epstopdf to convert plot-%s.eps to PDF' % \ - counter) - subprocess.check_call(['epstopdf', epsfile]) - continue - plotfilename = os.path.join(self.plotdir, 'plot-%s.%s' % (counter, fmt)) - _p_.save(filename=plotfilename, **kwargs) -% \end{macrocode} -% If the user provides a format \emph{and} specifies the |imagemagick| -% option, we try to convert the newly-created file into EPS format. -% \begin{macrocode} - if format != 'notprovided' and self.useimagemagick: - self.progress('Calling Imagemagick to convert plot-%s.%s to EPS' % \ - (counter, format)) - self.toeps(counter, format) -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{toeps} -% This function calls the Imagmagick utility |convert| to, well, convert -% something into EPS format. This gets called when the user has -% requested the ``|imagemagick|'' option to the \ST\ style file and is -% making a graphic file with a nondefault extension. -% \begin{macrocode} - def toeps(self, counter, ext): - subprocess.check_call(['convert',\ - '%s/plot-%s.%s' % (self.plotdir, counter, ext), \ - '%s/plot-%s.eps' % (self.plotdir, counter)]) -% \end{macrocode} -% We are blindly assuming that the |convert| command exists and will do -% the conversion for us; the |check_call| function raises an exception -% which, since all these calls get wrapped in try/excepts in the |.sage| -% file, should result in a reasonable error message if something strange -% happens. -% \end{macro} -% -% \begin{macro}{goboom} -% \phantomsection\label{macro:goboom} -% When a chunk of Sage code blows up, this function bears the bad news -% to the user. Normally in Python the traceback is good enough for -% this, but in this case, we start with a |.sage| file (which is -% autogenerated) which itself autogenerates a |.py| file---and the -% tracebacks the user sees refer to that file, whose line numbers are -% basically useless. We want to tell them where in the \LTX file -% things went bad, so we do that, give them the traceback, and exit -% after removing the |.sout.tmp| file. -% \begin{macrocode} - def goboom(self, line): - print('\n**** Error in Sage code on line %s of %s.tex! Traceback\ - follows.' % (line, self.filename)) - traceback.print_exc() - print('\n**** Running Sage on %s.sage failed! Fix %s.tex and try\ - again.' % ((self.filename,) * 2)) - self.souttmp.close() - os.remove(self.filename + '.sout.tmp') - sys.exit(int(1)) -% \end{macrocode} -% We use |int(1)| above to make sure |sys.exit| sees a Python integer; -% see -% \href{http://trac.sagemath.org/sage_trac/ticket/2861#comment:5}{ticket -% \#2861}. -% \changes{v2.0.2}{2008/04/21}{Make sure sys.exit sees a Python integer} -% \end{macro} -% -% \begin{macro}{endofdoc} -% When we're done processing, we have some cleanup tasks. We -% want to put the MD5 sum of the |.sage| file that produced the |.sout| -% file we're about to write into the |.sout| file, so that external -% programs that build \LTX documents can determine if they need to call Sage -% to update the |.sout| file. But there is a problem: we write line -% numbers to the |.sage| file so that we can provide useful error -% messages---but that means that adding non-\ST text to your -% source file will change the MD5 sum, and your program will think it -% needs to rerun Sage even though none of the actual \ST macros -% changed. -% -% How do we include line numbers for our error messages but still allow -% a program to discover a ``genuine'' change to the |.sage| file? -% -% The answer is to only find the MD5 sum of \emph{part} of the |.sage| -% file. By design, the source file line numbers only appear in calls to -% |goboom| and pause/unpause lines, so we will strip those lines out. -% What we do below is exactly equivalent to running -% \begin{center} -% \verb+egrep '^( _st_.goboom|print .SageT)' filename.sage | md5sum+ -% \end{center} -% in a shell. -% \begin{macrocode} - def endofdoc(self): - sagef = open(self.filename + '.sage', 'r') - m = hashlib.md5() - for line in sagef: - if line[0:12] != " _st_.goboom" and line[0:12] != "print 'SageT": - m.update(line) - s = '%' + m.hexdigest() + '% md5sum of corresponding .sage file\ - (minus "goboom" and pause/unpause lines)\n' - self.souttmp.write(s) -% \end{macrocode} -% Now, we do issue warnings to run Sage on the |.sage| file and an -% external program might look for those to detect the need to rerun -% Sage, but those warnings do not quite capture all situations. (If -% you've already produced the |.sout| file and change a |\sage| call, no -% warning will be issued since all the |\ref|s find a |\newlabel|.) -% Anyway, I think it's easier to grab an MD5 sum out of the end of the -% file than parse the output from running |latex| on your file. (The -% regular expression |^%[0-9a-f]{32}%| will find the MD5 sum. Note that -% there are percent signs on each side of the hex string.) -% -% Now we are done with the |.sout.tmp| file. Close it, rename it, and -% tell the user we're done. -% \begin{macrocode} - self.souttmp.close() - os.rename(self.filename + '.sout.tmp', self.filename + '.sout') - self.progress('Sage processing complete. Run LaTeX on %s.tex again.' %\ - self.filename) -% \end{macrocode} -% % \changes{v2.1.1}{2009/05/14}{Fix bug in finding md5 sum introduced by -% pause facility} -% \end{macro} - -% \endinput -%</python> -% Local Variables: -% mode: doctex -% TeX-master: "sagetexpackage" -% End: diff --git a/Master/texmf-dist/source/latex/sagetex/remote-sagetex.dtx b/Master/texmf-dist/source/latex/sagetex/remote-sagetex.dtx deleted file mode 100644 index 2360e220277..00000000000 --- a/Master/texmf-dist/source/latex/sagetex/remote-sagetex.dtx +++ /dev/null @@ -1,438 +0,0 @@ -% \section{The \texttt{remote-sagetex} script} -% \label{sec:remote-sagetex-code} -% -% -% Here we describe the Python code for |remote-sagetex.py|. Since its -% job is to replicate the functionality of using Sage and |sagetex.py|, -% there is some overlap with the Python module. -% -% \iffalse -%<*remotesagetex> -% \fi -% -% The |#!/usr/bin/env python| line is provided for us by the |.ins| -% file's preamble, so we don't put it here. -% \begin{macrocode} -from __future__ import print_function -import json -import sys -import time -import re -import urllib -import hashlib -import os -import os.path -import shutil -import getopt -from contextlib import closing - -######################################################################### -# You can provide a filename here and the script will read your login # -# information from that file. The format must be: # -# # -# server = 'http://foo.com:8000' # -# username = 'my_name' # -# password = 's33krit' # -# # -# You can omit one or more of those lines, use " quotes, and put hash # -# marks at the beginning of a line for comments. Command-line args # -# take precedence over information from the file. # -######################################################################### -login_info_file = None # e.g. '/home/foo/Private/sagetex-login.txt' - - -usage = """Process a SageTeX-generated .sage file using a remote Sage server. - -Usage: {0} [options] inputfile.sage - -Options: - - -h, --help: print this message - -s, --server: the Sage server to contact - -u, --username: username on the server - -p, --password: your password - -f, --file: get login information from a file - -If the server does not begin with the four characters `http', then -`https://' will be prepended to the server name. - -You can hard-code the filename from which to read login information into -the remote-sagetex script. Command-line arguments take precedence over -the contents of that file. See the SageTeX documentation for formatting -details. - -If any of the server, username, and password are omitted, you will be -asked to provide them. - -See the SageTeX documentation for more details on usage and limitations -of remote-sagetex.""".format(sys.argv[0]) - -server, username, password = (None,) * 3 - -try: - opts, args = getopt.getopt(sys.argv[1:], 'hs:u:p:f:', - ['help', 'server=', 'user=', 'password=', 'file=']) -except getopt.GetoptError as err: - print(str(err), usage, sep='\n\n') - sys.exit(2) - -for o, a in opts: - if o in ('-h', '--help'): - print(usage) - sys.exit() - elif o in ('-s', '--server'): - server = a - elif o in ('-u', '--user'): - username = a - elif o in ('-p', '--password'): - password = a - elif o in ('-f', '--file'): - login_info_file = a - -if len(args) != 1: - print('Error: must specify exactly one file. Please specify options first.', - usage, sep='\n\n') - sys.exit(2) - -jobname = os.path.splitext(args[0])[0] -% \end{macrocode} -% When we send things to the server, we get everything back as a string, -% including tracebacks. We can search through output using regexps to -% look for typical traceback strings, but there's a more robust way: put -% in a special string that changes every time and is printed when -% there's an error, and look for that. Then it is massively unlikely -% that a user's code could produce output that we'll mistake for an -% actual traceback. System time will work well enough for these -% purposes. We produce this string now, and we it when parsing the -% |.sage| file (we insert it into code blocks) and when parsing the -% output that the remote server gives us. -% \begin{macrocode} -traceback_str = 'Exception in SageTeX session {0}:'.format(time.time()) -% \end{macrocode} -% \begin{macro}{parsedotsage} -% To figure out what commands to send the remote server, we actually -% read in the |.sage| file as strings and parse it. This seems a bit -% strange, but since we know exactly what the format of that file is, we -% can parse it with a couple flags and a handful of regexps. -% \begin{macrocode} -def parsedotsage(fn): - with open(fn, 'r') as f: -% \end{macrocode} -% Here are the regexps we use to snarf the interesting bits out of the -% |.sage| file. Below we'll use the |re| module's |match| function so we -% needn't anchor any of these at the beginning of the line. -% \begin{macrocode} - inline = re.compile(r" _st_.inline\((?P<num>\d+), (?P<code>.*)\)") - plot = re.compile(r" _st_.plot\((?P<num>\d+), (?P<code>.*)\)") - goboom = re.compile(r" _st_.goboom\((?P<num>\d+)\)") - pausemsg = re.compile(r"print.'(?P<msg>SageTeX (un)?paused.*)'") - blockbegin = re.compile(r"_st_.blockbegin\(\)") - ignore = re.compile(r"(try:)|(except):") - in_comment = False - in_block = False - cmds = [] -% \end{macrocode} -% Okay, let's go through the file. We're going to make a list of -% dictionaries. Each dictionary corresponds to something we have to do -% with the remote server, except for the pause/unpause ones, which we -% only use to print out information for the user. All the dictionaries -% have a |type| key, which obviously tells you type they are. The -% pause/unpause dictionaries then just have a |msg| which we toss out to -% the user. The ``real'' dictionaries all have the following keys: -% \begin{itemize} -% \item |type|: one of |inline|, |plot|, and |block|. -% \item |goboom|: used to help the user pinpoint errors, just like the -% |goboom| function (page \pageref{macro:goboom}) does. -% \item |code|: the code to be executed. -% \end{itemize} -% Additionally, the |inline| and |plot| dicts have a |num| key for the -% label we write to the |.sout| file. -% -% Here's the whole parser loop. The interesting bits are for parsing -% blocks because there we need to accumulate several lines of code. -% \begin{macrocode} - for line in f.readlines(): - if line.startswith('"""'): - in_comment = not in_comment - elif not in_comment: - m = pausemsg.match(line) - if m: - cmds.append({'type': 'pause', - 'msg': m.group('msg')}) - m = inline.match(line) - if m: - cmds.append({'type': 'inline', - 'num': m.group('num'), - 'code': m.group('code')}) - m = plot.match(line) - if m: - cmds.append({'type': 'plot', - 'num': m.group('num'), - 'code': m.group('code')}) -% \end{macrocode} -% The order of the next three ``if''s is important, since we need the -% ``goboom'' line and the ``blockbegin'' line to \emph{not} get included -% into the block's code. Note that the lines in the |.sage| file already -% have some indentation, which we'll use when sending the block to the -% server---we wrap the text in a try/except. -% \begin{macrocode} - m = goboom.match(line) - if m: - cmds[-1]['goboom'] = m.group('num') - if in_block: - in_block = False - if in_block and not ignore.match(line): - cmds[-1]['code'] += line - if blockbegin.match(line): - cmds.append({'type': 'block', - 'code': ''}) - in_block = True - return cmds -% \end{macrocode} -% \end{macro} -% Parsing the |.sage| file is simple enough so that we can write one -% function and just do it. Interacting with the remote server is a bit -% more complicated, and requires us to carry some state, so let's make a -% class. -% -% \begin{macro}{RemoteSage} -% \changes{v2.2.1}{2009/06/20}{Fix stupid bug in \texttt{do\_inline()} -% so that we actually write output to .sout file} -% -% This is pretty simple; it's more or less a translation of the examples -% in \texttt{sage/server/simple/twist.py}. -% \begin{macrocode} -debug = False -class RemoteSage: - def __init__(self, server, user, password): - self._srv = server.rstrip('/') - sep = '___S_A_G_E___' - self._response = re.compile('(?P<header>.*)' + sep + - '\n*(?P<output>.*)', re.DOTALL) - self._404 = re.compile('404 Not Found') - self._session = self._get_url('login', - urllib.urlencode({'username': user, - 'password': - password}))['session'] -% \end{macrocode} -% In the string below, we want to do ``partial formatting'': we format -% in the traceback string now, and want to be able to format in the code -% later. The double braces get ignored by |format()| now, and are picked -% up by |format()| when we use this later. -% \begin{macrocode} - self._codewrap = """try: -{{0}} -except: - print('{0}') - traceback.print_exc()""".format(traceback_str) - self.do_block(""" - import traceback - def __st_plot__(counter, _p_, format='notprovided', **kwargs): - if format == 'notprovided': - formats = ['eps', 'pdf'] - else: - formats = [format] - for fmt in formats: - plotfilename = 'plot-%s.%s' % (counter, fmt) - _p_.save(filename=plotfilename, **kwargs)""") - - def _encode(self, d): - return 'session={0}&'.format(self._session) + urllib.urlencode(d) - - def _get_url(self, action, u): - with closing(urllib.urlopen(self._srv + '/simple/' + action + - '?' + u)) as h: - data = self._response.match(h.read()) - result = json.loads(data.group('header')) - result['output'] = data.group('output').rstrip() - return result - - def _get_file(self, fn, cell, ofn=None): - with closing(urllib.urlopen(self._srv + '/simple/' + 'file' + '?' + - self._encode({'cell': cell, 'file': fn}))) as h: - myfn = ofn if ofn else fn - data = h.read() - if not self._404.search(data): - with open(myfn, 'w') as f: - f.write(data) - else: - print('Remote server reported {0} could not be found:'.format( - fn)) - print(data) -% \end{macrocode} -% The |code| below gets stuffed between a try/except, so make sure it's -% indented! -% \begin{macrocode} - def _do_cell(self, code): - realcode = self._codewrap.format(code) - result = self._get_url('compute', self._encode({'code': realcode})) - if result['status'] == 'computing': - cell = result['cell_id'] - while result['status'] == 'computing': - sys.stdout.write('working...') - sys.stdout.flush() - time.sleep(10) - result = self._get_url('status', self._encode({'cell': cell})) - if debug: - print('cell: <<<', realcode, '>>>', 'result: <<<', - result['output'], '>>>', sep='\n') - return result - - def do_inline(self, code): - return self._do_cell(' print(latex({0}))'.format(code)) - - def do_block(self, code): - result = self._do_cell(code) - for fn in result['files']: - self._get_file(fn, result['cell_id']) - return result - - def do_plot(self, num, code, plotdir): - result = self._do_cell(' __st_plot__({0}, {1})'.format(num, code)) - for fn in result['files']: - self._get_file(fn, result['cell_id'], os.path.join(plotdir, fn)) - return result -% \end{macrocode} -% When using the simple server API, it's important to log out so the -% server doesn't accumulate idle sessions that take up lots of memory. -% We define a |close()| method and use this class with the |closing| -% context manager that always calls |close()| on the way out. -% \begin{macrocode} - def close(self): - sys.stdout.write('Logging out of {0}...'.format(server)) - sys.stdout.flush() - self._get_url('logout', self._encode({})) - print('done') -% \end{macrocode} -% \end{macro} -% Next we have a little pile of miscellaneous functions and variables -% that we want to have at hand while doing our work. Note that we again -% use the traceback string in the error-finding regular expression. -% \begin{macrocode} -def do_plot_setup(plotdir): - printc('initializing plots directory...') - if os.path.isdir(plotdir): - shutil.rmtree(plotdir) - os.mkdir(plotdir) - return True - -did_plot_setup = False -plotdir = 'sage-plots-for-' + jobname + '.tex' - -def labelline(n, s): - return r'\newlabel{@sageinline' + str(n) + '}{{' + s + '}{}{}{}{}}\n' - -def printc(s): - print(s, end='') - sys.stdout.flush() - -error = re.compile("(^" + traceback_str + ")|(^Syntax Error:)", re.MULTILINE) - -def check_for_error(string, line): - if error.search(string): - print(""" -**** Error in Sage code on line {0} of {1}.tex! -{2} -**** Running Sage on {1}.sage failed! Fix {1}.tex and try again.""".format( - line, jobname, string)) - sys.exit(1) -% \end{macrocode} -% Now let's actually start doing stuff. -% \begin{macrocode} -print('Processing Sage code for {0}.tex using remote Sage server.'.format( - jobname)) - -if login_info_file: - with open(login_info_file, 'r') as f: - print('Reading login information from {0}.'.format(login_info_file)) - get_val = lambda x: x.split('=')[1].strip().strip('\'"') - for line in f: - print(line) - if not line.startswith('#'): - if line.startswith('server') and not server: - server = get_val(line) - if line.startswith('username') and not username: - username = get_val(line) - if line.startswith('password') and not password: - password = get_val(line) - -if not server: - server = raw_input('Enter server: ') - -if not server.startswith('http'): - server = 'https://' + server - -if not username: - username = raw_input('Enter username: ') - -if not password: - from getpass import getpass - password = getpass('Please enter password for user {0} on {1}: '.format( - username, server)) - -printc('Parsing {0}.sage...'.format(jobname)) -cmds = parsedotsage(jobname + '.sage') -print('done.') - -sout = '% This file was *autogenerated* from the file {0}.sage.\n'.format( - os.path.splitext(jobname)[0]) - -printc('Logging into {0} and starting session...'.format(server)) -with closing(RemoteSage(server, username, password)) as sage: - print('done.') - for cmd in cmds: - if cmd['type'] == 'inline': - printc('Inline formula {0}...'.format(cmd['num'])) - result = sage.do_inline(cmd['code']) - check_for_error(result['output'], cmd['goboom']) - sout += labelline(cmd['num'], result['output']) - print('done.') - if cmd['type'] == 'block': - printc('Code block begin...') - result = sage.do_block(cmd['code']) - check_for_error(result['output'], cmd['goboom']) - print('end.') - if cmd['type'] == 'plot': - printc('Plot {0}...'.format(cmd['num'])) - if not did_plot_setup: - did_plot_setup = do_plot_setup(plotdir) - result = sage.do_plot(cmd['num'], cmd['code'], plotdir) - check_for_error(result['output'], cmd['goboom']) - print('done.') - if cmd['type'] == 'pause': - print(cmd['msg']) - if int(time.time()) % 2280 == 0: - printc('Unscheduled offworld activation; closing iris...') - time.sleep(1) - print('end.') - -with open(jobname + '.sage', 'r') as sagef: - h = hashlib.md5() - for line in sagef: - if (not line.startswith(' _st_.goboom') and - not line.startswith("print 'SageT")): - h.update(line) -% \end{macrocode} -% Putting the |{1}| in the string, just to replace it with |%|, seems a -% bit weird, but if I put a single percent sign there, Docstrip won't -% put that line into the resulting |.py| file---and if I put two percent -% signs, it replaces them with |\MetaPrefix| which is |##| when this -% file is generated. This is a quick and easy workaround. -% \begin{macrocode} - sout += """%{0}% md5sum of corresponding .sage file -{1} (minus "goboom" and pause/unpause lines) -""".format(h.hexdigest(), '%') - -printc('Writing .sout file...') -with open(jobname + '.sout', 'w') as soutf: - soutf.write(sout) - print('done.') -print('Sage processing complete. Run LaTeX on {0}.tex again.'.format(jobname)) -% \end{macrocode} - -% \endinput -%</remotesagetex> -% Local Variables: -% mode: doctex -% TeX-master: "sagetexpackage" -% End: diff --git a/Master/texmf-dist/source/latex/sagetex/sagetexpackage.dtx b/Master/texmf-dist/source/latex/sagetex/sagetexpackage.dtx deleted file mode 100644 index 6b6acfd8f4e..00000000000 --- a/Master/texmf-dist/source/latex/sagetex/sagetexpackage.dtx +++ /dev/null @@ -1,974 +0,0 @@ -% \iffalse meta-comment -% -% Copyright (C) 2009 by Dan Drake <ddrake (at) member (dot) ams (dot) org> -% ------------------------------------------------------- -% -% See the "Copying and licenses" section in this file for the terms -% under which this source code and documentation may be modified and -% distributed. -% -% This package is not licensed under the LPPL, but it seems reasonable -% to say: -% -% This work has the LPPL maintenance status `maintained'. -% -% The Current Maintainer of this work is Dan Drake. -% -% This work consists of the files sagetexpackage.dtx, py-and-sty.dtx, -% scripts.dtx, remote-sagetex.dtx, sagetexpackage.ins, example.tex, -% and the derived files sagetex.sty, sagetex.py, sagetexparse.py, -% makestatic.py, extractsagecode.py, and remote-sagetex.py. -% -% \fi -% -% \iffalse -%<*driver> -\ProvidesFile{sagetexpackage.dtx} -%</driver> -%<latex>\NeedsTeXFormat{LaTeX2e} -%<latex>\ProvidesPackage{sagetex} -%<python>__version__ = """ -%<*latex|python> - [2009/06/17 v2.2.1 embedding Sage into LaTeX documents] -%</latex|python> -%<python>""" -%<*driver> -\documentclass{ltxdoc} -\usepackage{sagetex} -\usepackage{xspace} -\usepackage{tikz} -\usepackage{hyperref} -% \iffalse -% Work around a problem with using Docstrip and hyperref; for macros and -% such described with DescribeMacro and friends, plain Docstrip puts -% something like this into the .idx file: -% -% \indexentry{sage=\verb!*+\sage+|usage}{5} -% -% and defines \usage{}. hyperref comes along and sneakily alters those -% lines and adds: -% -% \indexentry{sage=\verb!*+\sage+|usage|hyperpage}{5} -% -% and makeindex gets confused because you can't have two | things in one -% indexentry. I could probably figure out how to fix this in LaTeX, but -% it's easier to run sed on the .idx file to remove the extra | and -% define a new macro that makes the text italic and puts in the -% hyperlink. -% -% Another option is to forget about all this and just pass the -% hyperindex=false option to hyperref, but then you don't get -% hyperlinked page numbers. -% \fi -\newcommand{\usagehyperpage}[1]{\textit{\hyperpage{#1}}} - -\renewcommand{\subsubsectionautorefname}{section} -\renewcommand{\subsectionautorefname}{section} -\EnableCrossrefs -\CodelineIndex -\RecordChanges -\begin{document} -\DocInput{sagetexpackage.dtx} -\StopEventually{ -\section{Credits and acknowledgments} - -According to the original README file, this system was originally done -by Gonzalo Tornaria and Joe Wetherell. Later Harald Schilly made some -improvements and modifications. Almost all the examples in the -|example.tex| file are from Harald. - -Dan Drake rewrote and extended the style file (there is effectively zero -original code there), made significant changes to the Python module, put -both files into \textsf{Docstrip} format, and wrote all the -documentation and extra Python scripts. - -Many thanks to Jason Grout for his numerous comments, suggestions, and -feedback. - -\section{Copying and licenses} -\label{sec:copying-licenses} - -If you are unnaturally curious about the current state of the \ST -package, you can visit \url{http://www.bitbucket.org/ddrake/sagetex/}. -There is a Mercurial repository and other stuff there. - -As for the terms and conditions under which you can copy and modify \ST: - -The \emph{source code} of the \ST package may be redistributed and/or -modified under the terms of the GNU General Public License as published -by the Free Software Foundation, either version 2 of the License, or (at -your option) any later version. To view a copy of this license, see -\url{http://www.gnu.org/licenses/} or send a letter to the Free Software -Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA -02110-1301, USA. - -The \emph{documentation} of the \ST package is licensed under the -Creative Commons Attribution-Noncommercial-Share Alike 3.0 License. To -view a copy of this license, visit -\url{http://creativecommons.org/licenses/by-nc-sa/3.0/} or send a letter -to Creative Commons, 171 Second Street, Suite 300, San Francisco, -California, 94105, USA. - -\iffalse meta-comment - I've run into a situation where the index wants to start on the very - last line of the page, and I actually get errors: ``Package multicol - Error: Error saving partial page.'' The problem goes away if I fiddle - with some lines so that the index starts elsewhere. Putting in a - clearpage below makes the index start nicely in the middle of a page - (until my change history gets too long!) and solves all those - problems. It can be removed/pulled into this comment if you're - confident the page break problems won't occur. -\clearpage -\fi -} - -\DocInput{py-and-sty.dtx} -\DocInput{scripts.dtx} -\DocInput{remote-sagetex.dtx} -\Finale -\PrintChanges -\PrintIndex -\end{document} -%</driver> -% \fi -% -% \CheckSum{335} -% -% \CharacterTable -% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z -% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z -% Digits \0\1\2\3\4\5\6\7\8\9 -% Exclamation \! Double quote \" Hash (number) \# -% Dollar \$ Percent \% Ampersand \& -% Acute accent \' Left paren \( Right paren \) -% Asterisk \* Plus \+ Comma \, -% Minus \- Point \. Solidus \/ -% Colon \: Semicolon \; Less than \< -% Equals \= Greater than \> Question mark \? -% Commercial at \@ Left bracket \[ Backslash \\ -% Right bracket \] Circumflex \^ Underscore \_ -% Grave accent \` Left brace \{ Vertical bar \| -% Right brace \} Tilde \~} -% -% \changes{v1.0}{2008/03/03}{Initial version} -% \changes{v1.1}{2008/03/05}{Wrapped user-provided Sage code in -% try/except clauses; plotting now has optional format argument} -% \changes{v1.2}{2008/03/07}{Imagemagick option; better documentation} -% \changes{v1.3.1}{2008/03/10}{Internal variables renamed; fixed typos} -% \changes{v1.4}{2008/03/11}{MD5 fix, percent sign macro, CTAN upload} -% \changes{v2.0}{2008/12/16}{External Python scripts for parsing -% SageTeX-ified documents, tons of documentation improvements, -% sagetex.py refactored, include in Sage as spkg} -% \changes{v2.0}{2009/01/09}{Miscellaneous fixes, final 2.0 version} -% \changes{v2.1}{2009/05/12}{Add pausing support} -% \changes{v2.1}{2009/05/12}{Get version written to .py file} -% \changes{v2.2}{2009/06/17}{Add remote-sagetex.py script} -% -% \GetFileInfo{sagetex.sty} -% -% \DoNotIndex{\newcommand,\newenvironment,\the} -% -% \newcommand{\ST}{\textsf{Sage\TeX}\xspace} -% \iffalse -% so I don't have to put \ or {} after \LaTeX: -% \fi -% \newcommand{\LTX}{\LaTeX\xspace} -% -% \newcommand{\TikZ}{Ti\emph{k}Z\xspace} -% -% \newcommand{\warningbox}[1]{\colorbox[rgb]{1, 0.6, 0.6}% -% {\parbox{.97\textwidth}{#1}}} -% -% \tikzstyle{box}=[draw, shape=rectangle, thick] -% -% \title{The \ST{} package\thanks{This document corresponds to -% \ST \fileversion, dated \filedate.}} -% -% \author{Dan Drake and others\thanks{Author's website: -% \href{http://mathsci.kaist.ac.kr/~drake/} -% {\texttt{mathsci.kaist.ac.kr/$\sim$drake/}}.}} -% -% \iffalse -% Don't put any other code from this file into the .sty or .py -% file: -%<*!latex&!python> -% This lets us use verbatim environments in the documentation. -% \fi -% -% \maketitle -% -% \section{Introduction} -% -% Why should the Haskell and R folks have all the fun? -% \href{http://www.haskell.org/haskellwiki/Literate_programming}{Literate -% Haskell} is a popular way to mix Haskell source code and \LTX -% documents. (Actually any kind of text or document, but here we're -% concerned only with \LTX.) You can even embed Haskell code in your -% document that writes part of your document for you. Similarly, the R -% statistical computing environment includes -% \href{http://tug.org/pracjourn/2008-1/zahn/}{Sweave}, which lets you -% do the same thing with R code and \LTX. -% -% The \ST package allows you to do (roughly) the same thing with the -% Sage mathematics software suite (see \url{http://sagemath.org}) and -% \LTX. (If you know how to write literate Haskell: the |\eval| command -% corresponds to |\sage|, and the |code| environment to the |sageblock| -% environment.) As a simple example, imagine in your document you are -% writing about how to count license plates with three letters and three -% digits. With this package, you can write something like this: -% \begin{quote} -% |There are $26$ choices for each letter, and $10$ choices for|\\ -% |each digit, for a total of $26^3 \cdot 10^3 =|\\ -% |\sage{26^3*10^3}$ license plates.| -% \end{quote} -% and it will produce -% \begin{quote} -% There are $26$ choices for each letter, and $10$ choices for each -% digit, for a total of $26^3 \cdot 10^3 = \sage{26^3 * 10^3}$ license -% plates. -% \end{quote} -% The great thing is, you don't have to do the multiplication. Sage does -% it for you. This process mirrors one of the great aspects of \LTX: -% when writing a \LTX document, you can concentrate on the logical -% structure of the document and trust \LTX and its army of packages to -% deal with the presentation and typesetting. Similarly, with \ST, you -% can concentrate on the mathematical structure (``I need the product of -% $26^3$ and $10^3$'') and let Sage deal with the base-$10$ presentation -% of the number. -% -% A less trivial, and perhaps more useful example is plotting. You can -% include a plot of the sine curve without manually producing a plot, -% saving an EPS or PDF file, and doing the |\includegraphics| business -% with the correct filename yourself. If you write this: -% \begin{quote} -% |Here is a lovely graph of the sine curve:| -% -% |\sageplot{plot(sin(x), x, 0, 2*pi)}| -% \end{quote} -% in your \LTX file, it produces -% \begin{quote} -% Here is a lovely graph of the sine curve: -% -% \sageplot{plot(sin(x), x, 0, 2*pi)} -% \end{quote} -% Again, you need only worry about the logical/mathematical structure of -% your document (``I need a plot of the sine curve over the interval -% $[0, 2\pi]$ here''), while \ST{} takes care of the gritty details of -% producing the file and sourcing it into your document. -% -% \paragraph{But \texttt{\bslash sageplot} isn't magic} I just tried to -% convince you that \ST makes putting nice graphics into your document -% very easy; let me turn around and warn you that using graphics -% \emph{well} is not easy, and no \LTX package or Python script will -% ever make it easy. What \ST does is make it easy to \emph{use Sage} to -% create graphics; it doesn't magically make your graphics good, -% appropriate, or useful. (For instance, look at the sine plot above---I -% would say that a truly lovely plot of the sine curve would not mark -% integer points on the $x$-axis, but rather $\pi/2$, $\pi$, $3\pi/2$, -% and $2\pi$.) -% -% Till Tantau has some good commentary on the use of graphics in -% \href{http://www.ctan.org/tex-archive/graphics/pgf/}{section 6 of the -% \textsc{pgf} manual}. You should always give careful thought and -% attention to creating graphics for your document; I have in mind that -% a good workflow for using \ST for plotting is something like this: -% -% \begin{enumerate} -% \item Figure out what sort of graphic you need to communicate your -% ideas or information. -% \item Fiddle around in Sage until you get a graphics object and set -% of options that produce the graphic you need. -% \item Copy those commands and options into \ST commands in your -% \LTX document. -% \end{enumerate} -% -% The \ST{} package's plotting capabilities don't help you find those -% Sage commands to make your lovely plot, but they do eliminate the need -% to muck around with saving the result to a file, remembering the -% filename, including it into your document, and so on. In -% \autoref{sec:usage}, we will see what what we can do with \ST. -% -% -% \section{Installation} -% \label{sec:installation} -% \changes{v2.0}{2009/01/14}{Fixed up installation section, final -% \emph{final} 2.0} -% -% To install \ST, you need to do two things: make \ST known to Sage, and -% to \LTX. There are two basic methods to do those two things. -% -% \newcommand{\sageroot}{\$SAGE\_ROOT} -% -% In what follows, ``\texttt{\sageroot}'' refers to the root directory -% of your Sage installation. -% -% \subsection{As a Sage spkg} -% \label{sec:install-spkg} -% -% The easiest way to install \ST is by using Sage's own spkg -% installation facility; visit the -% \href{http://sagemath.org/packages/optional/}{optional packages page} -% and run \texttt{sage -i} with the appropriate file name. This will let -% Sage know about \ST; you still need to let \LTX know about it. -% -% The simplest way to ``install'' \ST for \LTX is to copy the file -% |sagetex.sty| from \texttt{\sageroot/local/share/texmf} to the same -% directory as your document. This will always work, as \LTX always -% searches the current directory for files. -% -% Rather than make lots of copies of |sagetex.sty|, you can keep it (and -% the rest of the \ST documentation) in a |texmf| directory. The easiest -% thing to do is to create a |texmf| directory in your home directory -% and use the |texhash| utility so that your \TeX{} system can find the -% new files. See -% \href{http://www.tex.ac.uk/cgi-bin/texfaq2html?label=privinst} -% {\texttt{www.tex.ac.uk/cgi-bin/texfaq2html?label=privinst}} which -% describes the basic ideas, and also -% \href{http://www.tex.ac.uk/cgi-bin/texfaq2html?label=what-TDS} -% {\texttt{www.tex.ac.uk/cgi-bin/texfaq2html?label=what-TDS}} which has -% some information specific to MiK\TeX. Linux/Unix users can use -% |$HOME/texmf| and users of Mac\TeX{} should use |$HOME/Library/texmf|. -% -% To copy the files that \LTX needs into your |texmf| directory, simply -% do -% \begin{quote} -% \texttt{cp -r \sageroot/local/share/texmf/* HOMEPREFIX/texmf/} -% \end{quote} -% where |HOMEPREFIX| is the appropriate prefix for your own |texmf| -% tree. Then you need to make \TeX{} aware of the new files by running -% \begin{quote} -% \texttt{texhash HOMEPREFIX/texmf/} -% \end{quote} -% -% \subsection{From CTAN} -% \label{sec:install-ctan} -% -% You can also get \ST from \href{http://tug.ctan.org/pkg/sagetex}{its -% CTAN page}. This is not the recommended way to get \ST, but it will -% work. -% -% If you get \ST from CTAN, you will need to make the |sagetex.sty| file -% available to \LTX using any of the methods described above, and you -% will also need to make |sagetex.py| known to Sage. You can either keep -% a copy of that file in the same directory as your document or put it -% where Sage will find it. You can use the |$SAGE_PATH| environment -% variable (which is analogous to the |$PYTHONPATH| variable) to tell -% Sage where the file is, or manually copy |sagetex.py| into -% \texttt{\sageroot/local/lib/python/site-packages}. -% -% \subsection{Using \TeX Shop} -% \label{sec:using-texshop} -% \changes{v2.0.1}{2009/03/10}{Add \TeX Shop info} -% -% Starting with version 2.25, -% \href{http://www.uoregon.edu/~koch/texshop/}{\TeX Shop} includes -% support for \ST. If you move the file |sage.engine| from -% |~/Library/TeXShop/Engines/Inactive/Sage| to -% |~/Library/TeXShop/Engines| and put the line -% \begin{quotation} -% |%!TEX TS-program = sage| -% \end{quotation} -% at the top of your document, then \TeX Shop will automatically run Sage -% for you when compiling your document. -% -% Note that you will need to make |sagetex.sty| and |sagetex.py| known -% to \LTX and Sage using any of the methods described above (although -% note that \TeX Shop includes copies of these files for you). You also -% might need to edit the |sage.engine| script to reflect the location of -% your Sage installation. -% -% \subsection{Other scripts included with \ST} -% \label{sec:inst-other-scripts} -% -% \ST includes several Python files which may be useful for working with -% ``\ST-ified'' documents. The |remote-sagetex.py| script allows you to -% use \ST on a computer that doesn't have Sage installed; see -% \autoref{sec:remote-sagetex} for more information. -% -% Also included are |makestatic.py| and |extractsagecode.py|, which are -% convenience scripts that you can use after you've written your -% document. See \autoref{sec:makestatic-usage} and -% \autoref{sec:extractsagecode} for information on using those scripts. -% The file |sagetexparse.py| is a module used by both those scripts. -% These three files are independent of \ST. If you install from a spkg, -% these scripts can be found in \texttt{\sageroot/local/share/texmf/}. -% -% \section{Usage} -% \label{sec:usage} -% -% Let's begin with a rough description of how \ST works. Naturally the -% very first step is to put |\usepackage{sagetex}| in the preamble of -% your document. When you use macros from this package and run \LTX on -% your file, along with the usual zoo of auxiliary files, a |.sage| file -% is written with the same basename as your document. This is a Sage -% source file that uses the Python module from this package and when you -% run Sage on that file, it will produce a |.sout| file. That file -% contains \LTX code that, when you run \LTX on your source file again, -% will pull in all the results of Sage's computation. -% -% All you really need to know is that to typeset your document, you need -% to run \LTX, then run Sage, then run \LTX again. You can even ``run -% Sage'' on a computer that doesn't have Sage installed by using the -% |remote-sagetex.py| script; see \autoref{sec:remote-sagetex}. Whenever -% this manual says ``run Sage'', you can either directly run Sage, or -% use the |remote-sagetex.py| script. -% -% Also keep in mind that everything you send to Sage is done within one -% Sage session. This means you can define variables and reuse them -% throughout your \LTX document; if you tell Sage that |foo| is -% $12$, then anytime afterwards you can use |foo| in your Sage code and -% Sage will remember that it's $12$---just like in a regular Sage -% session. -% -% Now that you know that, let's describe what macros \ST provides and -% how to use them. If you are the sort of person who can't be bothered -% to read documentation until something goes wrong, you can also just -% look through the |example.tex| file included with this -% package.\footnote{Then again, if you're such a person, you're probably -% not reading this, and are already fiddling with -% \texttt{example.tex}\dots}\\ -% -% \noindent\warningbox{\textbf{WARNING!} When you run \LTX on a file -% named \texttt{\meta{filename}.tex}, the file -% \texttt{\meta{filename}.sage} is created---and will be -% \emph{automatically overwritten} if it already exists. If you keep -% Sage scripts in the same directory as your \ST-ified \LTX documents, -% use a different file name!} -% -% \paragraph{The final option} On a similar note, \ST, like many \LTX -% packages, accepts the |final| option. When passed this option, either -% directly in the |\usepackage| line, or from the |\documentclass| line, -% \ST will not write a |.sage| file. It will try to read in the |.sout| -% file so that the \ST macros can pull in their results. However, this -% will not allow you to have an independent Sage script with the same -% basename as your document, since to get the |.sout| file, you need the -% |.sage| file. -% -% \subsection{Inline Sage} -% \label{sec:sagemacro-usage} -% -% \DescribeMacro{sage} -% \fbox{\texttt{\bslash sage}\marg{Sage code}} -% takes whatever Sage code you give it, runs Sage's |latex| function on -% it, and puts the result into your document. -% -% For example, if you do |\sage{matrix([[1, 2], [3,4]])^2}|, then that -% macro will get replaced by -% \begin{quote} -% |\left(\begin{array}{rr}|\\ -% |7 & 10 \\|\\ -% |15 & 22|\\ -% |\end{array}\right)| -% \end{quote} -% in your document---that \LTX code is exactly exactly what you get -% from doing -% \begin{center} -% |latex(matrix([[1, 2], [3,4]])^2)| -% \end{center} -% in Sage. -% -% Note that since \LTX will do macro expansion on whatever you give -% to |\sage|, you can mix \LTX variables and Sage variables! If -% you have defined the Sage variable |foo| to be $12$ (using, say, the -% |sageblock| environment), then you can do something like this: -% \begin{quote} -% |The prime factorization of the current page number plus foo|\\ -% |is $\sage{factor(foo + \thepage)}$|. -% \end{quote} -% -% Here, I'll do just that right now: the prime factorization of the -% current page number plus $12$ is $\sage{factor(\thepage + 12)}$. -% (Wrong answer? See footnote.\footnote{Is the above factorization -% wrong? If the current page number plus $12$ is one larger than the -% claimed factorization, another Sage/\LTX cycle on this source file -% should fix it. Why? The first time you run \LTX on this file, the -% sine graph isn't available, so the text where I've talked about the -% prime factorization is back one page. Then you run Sage, and it -% creates the sine graph and does the factorization. When you run \LTX -% again, the sine graph pushes the text onto the next page, but it -% uses the Sage-computed value from the previous page. Meanwhile, the -% |.sage| file has been rewritten with the correct page number, so if -% you do another Sage/\LTX cycle, you should get the correct value -% above. However, in some cases, even \emph{that} doesn't work because -% of some kind of \TeX{} weirdness in ending the one page a bit short -% and starting another.}) The |\sage| command doesn't automatically -% use math mode for its output, so be sure to use dollar signs or a -% displayed math environment -% as appropriate.\\ -% -% \DescribeMacro{\percent} If you are doing modular arithmetic or string -% formatting and need a percent sign in a call to |\sage| (or -% |\sageplot|), you can use |\percent|. Using a bare percent sign won't -% work because \LTX will think you're starting a comment and get -% confused; prefixing the percent sign with a backslash won't work -% because then ``|\%|'' will be written to the |.sage| file and Sage -% will get confused. The |\percent| macro makes everyone happy. -% -% Note that using |\percent| inside the verbatim-like environments -% described in \autoref{sec:codeblockenv} isn't necessary; a literal -% ``\percent'' inside such an environment will get written, uh, verbatim -% to the |.sage| file. -% -% \subsection{Graphics and plotting} -% \label{sec:graphics-plotting} -% -% \noindent \DescribeMacro{\sageplot} -% \fbox{\texttt{\bslash sageplot}\oarg{ltx opts}\oarg{fmt}\{\meta{graphics -% obj}, \meta{keyword args}\}} -% plots the given Sage graphics object and runs an -% |\includegraphics| command to put it into your document. It does not -% have to actually be a plot of a function; it can be any Sage graphics -% object. The options are described in \autoref{t:sageplotopts}. -% -% \begin{table}[h] -% \centering -% \begin{tabular}{l p{8cm}} -% Option & Description \\ -% \hline -% \meta{ltx options} & Any text here is passed directly into the -% optional arguments (between the square brackets) of an -% |\includegraphics| command. If not specified, -% ``|width=.75\textwidth|'' will be used.\\ -% \meta{fmt} & You can optionally specify a file extension here; Sage -% will then try to save the graphics object to a file with extension -% \emph{fmt}. If not specified, \ST\ will save to EPS and PDF files.\\ -% \meta{graphics obj} & A Sage object on which you can call |.save()| -% with a graphics filename.\\ -% \meta{keyword args} & Any keyword arguments you put here will -% all be put into the call to |.save()|. -% \end{tabular} -% \caption{Explanation of options for the \texttt{\bslash sageplot} -% command.} -% \label{t:sageplotopts} -% \end{table} -% -% This setup allows you to control both the Sage side of things, and the -% \LTX side. For instance, the command -% \begin{quote} -% |\sageplot[angle=30, width=5cm]{plot(sin(x), 0, pi), axes=False,|\\ -% |chocolate=True}| -% \end{quote} -% will run the following command in Sage: -% \begin{quote} -% |sage: plot(sin(x), 0, pi).save(filename=autogen, axes=False,|\\ -% |chocolate=True)| -% \end{quote} -% Then, in your \LTX file, the following command will be issued -% automatically: -% \begin{center} -% |\includegraphics[angle=30, width=5cm]{autogen}| -% \end{center} -% You can specify a file format if you like. This must be the -% \emph{second} optional argument, so you must use empty brackets if -% you're not passing anything to |\includegraphics|: -% \begin{center} -% |\sageplot[][png]{plot(sin(x), x, 0, pi)}| -% \end{center} -% The filename is automatically generated, and unless you specify a -% format, both EPS and PDF files will be generated. This allows you to -% freely switch between using, say, a DVI viewer (many of which have -% support for automatic reloading, source specials and make the writing -% process easier) and creating PDFs for posting on the web or emailing -% to colleagues. -% -% If you ask for, say, a PNG file, keep in mind that ordinary |latex| -% and DVI files have no support for PNG files; \ST detects this and will -% warn you that it cannot find a suitable file if using -% |latex|.\footnote{We use a typewriter font here to indicate the -% executables which produce DVI and PDF files, respectively, as -% opposed to ``\LTX'' which refers to the entire typesetting system.} -% If you use |pdflatex|, there will be no problems because PDF files can -% include PNG graphics. -% -% When \ST cannot find a graphics file, it inserts this into your -% document: -% -% \begin{center} -% \framebox[2cm]{\rule[-1cm]{0cm}{2cm}\textbf{??}} -% \end{center} -% -% \noindent That's supposed to resemble the image-not-found graphics -% used by web browsers and use the traditional ``\textbf{??}'' that \LTX -% uses to indicate missing references. -% -% You needn't worry about the filenames; they are automatically -% generated and will be put into the directory -% |sage-plots-for-filename.tex|. You can safely delete that directory -% anytime; if \ST can't find the files, it will warn you to run Sage to -% regenerate them.\\ -% -% \noindent\warningbox{\textbf{WARNING!} When you run Sage on your -% |.sage| file, all files in the -% \texttt{sage-plots-for-\meta{filename}.tex} directory \emph{will be -% deleted!} Do not put any files into that directory that you do not -% want to get automatically deleted.} -% -% \paragraph{The epstopdf option} One of the graphics-related options -% supported by \ST is |epstopdf|. This option causes \ST to use the -% |epstopdf| command to convert EPS files into PDF files. Like with the -% |imagemagick| option, it doesn't check to see if the |epstopdf| -% command exists or add options: it just runs the command. This option -% was motivated by a bug in the matplotlib PDF backend which caused it -% to create invalid PDFs. Ideally, this option should never be -% necessary; if you do need to use it, file a bug! -% -% \subsubsection{3D plotting} -% -% Right now there is, to put it nicely, a bit of tension between the -% sort of graphics formats supported by |latex| and |pdflatex|, and the -% graphics formats supported by Sage's 3D plotting systems. \LTX is -% happiest, and produces the best output, with EPS and PDF files, which -% are vector formats. Tachyon, Sage's 3D plotting system, produces -% bitmap formats like BMP and PNG. -% -% Because of this, when producing 3D plots with |\sageplot|, \emph{you -% must specify a file format}. The PNG format is compressed and lossless -% and is by far the best choice, so use that whenever possible. (Right -% now, it is always possible.) If you do not specify a file format, or -% specify one that Tachyon does not understand, it will produce files in -% the Targa format with an incorrect extension and \LTX (both |latex| -% and |pdflatex|) will be profoundly confused. Don't do that. -% -% Since |latex| does not support PNGs, when using 3D plotting (and -% therefore a bitmap format like PNG), \ST will always issue a warning -% about incompatible graphics if you use |latex|, provided you've -% processed the |.sage| file and the PNG file exists. The only exception -% is if you're using the |imagemagick| option below. (Running |pdflatex| -% on the same file will work, since PDF files can include PNG files.) -% -% \paragraph{The imagemagick option} As a response to the above issue, -% the \ST package has an |imagemagick| option. If you specify this -% option in the preamble of your document with the usual -% ``|\usepackage[imagemagick]{sagetex}|'', then when you are compiling -% your document using |latex|, any |\sageplot| command which requests a -% non-default format will cause the \ST Python script to convert the -% resulting file to EPS using the Imagemagick |convert| utility. It does -% this by executing ``|convert filename.EXT filename.eps|'' in a -% subshell. It doesn't add any options, check to see if the |convert| -% command exists or belongs to Imagemagick---it just runs the command. -% -% The resulting EPS files are not very high quality, but they will work. -% This option is not intended to produce good graphics, but to allow you -% to see your graphics when you use |latex| and DVI files while writing -% your document. -% -% \subsubsection{But that's not good enough!} -% \label{sec:notgoodenough} -% -% The |\sageplot| command tries to be both flexible and easy to use, but -% if you are just not happy with it, you can always do things manually: -% inside a |sagesilent| environment (see the next section) you could do -% \begin{quote} -% |your special commands|\\ -% |x = your graphics object|\\ -% |x.save(filename=myspecialfile.ext, options, etc)| -% \end{quote} -% and then, in your source file, do your own |\includegraphics| command. -% The \ST package gives you full access to Sage and Python and doesn't -% turn off anything in \LTX, so you can always do things manually. -% -% \subsection{Verbatim-like environments} -% \label{sec:codeblockenv} -% -% The \ST package provides several environments for typesetting and -% executing blocks of Sage code.\\ -% -% \DescribeEnv{sageblock} Any text between |\begin{sageblock}| and -% |\end{sageblock}| will be typeset into your file, and also written into -% the |.sage| file for execution. This means you can do something like -% this: -% \begin{quote} -% |\begin{sageblock}|\\ -% | var('x')|\\ -% | f(x) = sin(x) - 1|\\ -% | g(x) = log(x)|\\ -% | h(x) = diff(f(x) * g(x), x)|\\ -% |\end{sageblock}| -% \end{quote} -% and then anytime later write in your source file -% \begin{quote} -% |We have $h(2) = \sage{h(2)}$, where $h$ is the derivative of|\\ -% |the product of $f$ and $g$.| -% \end{quote} -% and the |\sage| call will get correctly replaced by $\sage{ -% diff((sin(x) - 1)*log(x), x)(x=1)}$. You can use any Sage or Python -% commands inside a |sageblock|; all the commands get sent directly to -% Sage.\\ -% -% \iffalse meta-comment -% Sadly, we can't use sageblock or similar environments in this file! -% If you prefix the lines inside the environment with percent signs, -% then those percent signs get written to your .sage file. If you -% *don't* prefix the lines with percent signs, those lines get written -% into the .sty or .py file. It's just too tricky to get docstrip and -% the verbatim stuff to play nicely together. I'd have to redefine how -% those environments work, and get them to strip off initial percents. -% \fi -% -% \DescribeEnv{sagesilent} This environment is like |sageblock|, but it -% does not typeset any of the code; it just writes it to the |.sage| -% file. This is useful if you have to do some setup in Sage that is not -% interesting or relevant to the document you are writing.\\ -% -% \DescribeEnv{sageverbatim} This environment is the opposite of the one -% above: whatever you type will be typeset, but not written into the -% |.sage| file. This allows you to typeset psuedocode, code that will -% fail, or take too much time to execute, or whatever.\\ -% -% \DescribeEnv{comment} Logically, we now need an environment that -% neither typesets nor executes your Sage code\ldots but the |verbatim| -% package, which is always loaded when using \ST, provides such an -% environment: |comment|. Another way to do this is to put stuff between -% |\iffalse| and |\fi|.\\ -% -% \DescribeMacro{\sagetexindent} There is one final bit to our -% verbatim-like environments: the indentation. The \ST package defines a -% length |\sagetexindent|, which controls how much the Sage code is -% indented when typeset. You can change this length however you like -% with |\setlength|: do |\setlength{\sagetexindent}{6ex}| or whatever. -% -% \subsection{Pausing \ST} -% \label{sec:pausing-st-usage} -% -% Sometimes when you are writing a document, you may wish to temporarily -% turn off or pause \ST to concentrate more on your document than on the -% Sage computations, or to simply have your document typeset faster. You -% can do this with the following commands. -% -% \DescribeMacro{\sagetexpause} \DescribeMacro{\sagetexunpause} Use -% these macros to ``pause'' and ``unpause'' \ST. After issuing this -% macro, \ST will simply skip over the corresponding calculations. -% Anywhere a |\sage| macro is used while paused, you will simply see -% \sagetexpause ``\sage{dummy call to sage to illustrate -% pausing}'', and anywhere a |\sageplot| macro is used, you will see:\\ -% -% \noindent -% \sageplot{dummy call to sageplot to illustrate pausing} -% \sagetexunpause\\ -% -% \noindent Anything in the verbatim-like environments of -% \autoref{sec:codeblockenv} will be typeset or not as usual, but none -% of the Sage code will be executed. -% -% Obviously, you use |\sagetexunpause| to unpause \ST and return to the -% usual state of affairs. Both commands are idempotent; issuing them -% twice or more in a row is the same as issuing them once. This means -% you don't need to precisely match pause and unpause commands: once -% paused, \ST stays paused until it sees |\sagetexunpause| and -% vice versa. -% -% \section{Other notes} -% -% Here are some other notes on using \ST. -% -% \subsection{Using Beamer} -% -% The \textsc{beamer} package does not play nicely with verbatim-like -% environments unless you ask it to. To use code block environments in a -% \textsc{beamer} presentation, do: -% \begin{quote} -% |\begin{frame}[fragile]|\\ -% |\begin{sageblock}|\\ -% |# sage stuff|\\ -% |# more stuff \end{sageblock}|\\ -% |\end{frame}|\\ -% \end{quote} -% For some reason, \textsc{beamer} inserts an extra line break at the -% end of the environment; if you put the |\end{sageblock}| on the same -% line as the last line of your code, it works properly. See section -% 12.9, ``Verbatim and Fragile Text'', in the \textsc{beamer} manual. -% -% Thanks to Franco Saliola for reporting this. -% -% \subsection{Plotting from Mathematica, Maple, etc.} -% -% Sage can use Mathematica, Maple, and friends and can tell them to do -% plotting, but since it cannot get those plots into a Sage graphics -% object, you cannot use |\sageplot| to use such graphics. You'll need -% to use the method described in ``But that's not good enough!'' -% (\autoref{sec:notgoodenough}) with some additional bits to get the -% directory right---otherwise your file will get saved to someplace in a -% hidden directory. -% -% For Mathematica, you can do something like this inside a |sagesilent| -% or |sageblock| environment: -% \begin{quote} -% |mathematica('myplot = commands to make your plot')|\\ -% |mathematica('Export["%s/graphicsfile.eps", myplot]' % os.getcwd())| -% \end{quote} -% then put |\includegraphics[opts]{graphicsfile}| in your file. -% -% For Maple, you'll need something like -% \begin{quote} -% |maple('plotsetup(ps, plotoutput=`%s/graphicsfile.eps`, \|\\ -% | plotoptions=`whatever`);' % os.getcwd())|\\ -% |maple('plot(function, x=1..whatever);')| -% \end{quote} -% and then |\includegraphics| as necessary. -% -% These interfaces, especially when plotting, can be finicky. The above -% commands are just meant to be a starting point. -% -% \subsection{Sending \ST files to others who don't use Sage} -% \label{sec:makestatic-usage} -% -% What can you do when sending a \LTX document that uses \ST to a -% colleague who doesn't use Sage?\footnote{Or who cannot use Sage, since -% currently \ST is not very useful on Windows.} The best option is to -% bring your colleague into the light and get him or her using Sage! But -% this may not be feasible, because some (most?) mathematicians are -% fiercely crotchety about their choice of computer algebra system, or -% you may be sending a paper to a journal or the arXiv, and such places -% will not run Sage just so they can typeset your paper---at least not -% until Sage is much closer to its goal of world domination. -% -% How can you send your \ST-enabled document to someone else who doesn't -% use Sage? The easiest way is to simply include with your document the -% following files: -% \begin{enumerate} -% \item |sagetex.sty| -% \item the generated |.sout| file -% \item the \texttt{sage-plots-for-\meta{filename}.tex} directory and -% its contents -% \end{enumerate} -% As long as |sagetex.sty| is available, your document can be typeset -% using any reasonable \LTX system. Since it is very common to include -% graphics files with a paper submission, this is a solution that should -% always work. (In particular, it will work with arXiv submissions.) -% -% There is another option, and that is to use the |makestatic.py| script -% included with \ST. -% -% Use of the script is quite simple. Copy it and |sagetexparse.py| to -% the directory with your document, and run -% \begin{quote} -% |python makestatic.py inputfile [outputfile]| -% \end{quote} -% where |inputfile| is your document. (You can also set the executable -% bit of |makestatic.py| and use |./makestatic.py|.) This script needs -% the \href{http://pyparsing.wikispaces.com}{pyparsing} module to be -% installed.\footnote{If you don't have pyparsing installed, you can -% simply copy the file -% \texttt{\sageroot/local/lib/python/matplotlib/pyparsing.py} into -% your directory.} You may optionally specify |outputfile|; if you do -% so, the results will be written to that file. If the file exists, it -% won't be overwritten unless you also specify the |-o| switch. -% -% You will need to run this after you've compiled your document and run -% Sage on the |.sage| file. The script reads in the |.sout| file and -% replaces all the calls to |\sage| and |\sageplot| with their plain -% \LTX equivalent, and turns the |sageblock| and |sageverbatim| -% environments into |verbatim| environments. Any |sagesilent| -% environment is turned into a |comment| environment. The resulting -% document should compile to something identical, or very nearly so, to -% the original file. -% -% One large limitation of this script is that it can't change anything -% while \ST is paused, since Sage doesn't compute anything for such -% parts of your document. It also doesn't check to see if pause and -% unpause commands are inside comments or verbatim environments. If -% you're going to use |makestatic.py|, just remove all pause/unpause -% statements. -% -% The parsing that |makestatic.py| does is pretty good, but not perfect. -% Right now it doesn't support having a comma-separated list of -% packages, so you can't have |\usepackage{sagetex, foo}|. You need to -% have just |\usepackage{sagetex}|. (Along with package options; those -% are handled correctly.) If you find other parsing errors, please let -% me know. -% -% \subsection{Extracting the Sage code from a document} -% \label{sec:extractsagecode} -% -% This next script is probably not so useful, but having done the above, -% this was pretty easy. The |extractsagecode.py| script does the -% opposite of |makestatic.py|, in some sense: given a document, it -% extracts all the Sage code and removes all the \LTX. -% -% Its usage is the same as |makestatic.py|. -% -% Note that the resulting file will almost certainly \emph{not} be a -% runnable Sage script, since there might be \LTX commands in it, the -% indentation may not be correct, and the plot options just get written -% verbatim to the file. Nevertheless, it might be useful if you just -% want to look at the Sage code in a file. -% -% \section{Using \ST without Sage installed} -% \label{sec:remote-sagetex} -% -% You may want to edit and typeset a \ST-ified file on a computer that -% doesn't have Sage installed. How can you do that? We need to somehow -% run Sage on the |.sage| file. The included script -% \texttt{remote-sagetex.py} takes advantage of Sage's network -% transparency and will use a remote server to do all the computations. -% Anywhere in this manual where you are told to ``run Sage'', instead of -% actually running Sage, you can run -% \begin{center} -% \texttt{python remote-sagetex.py filename.sage} -% \end{center} -% The script will ask you for a server, username, and password, then -% process all your code and write a |.sout| file and graphics files -% exactly as if you had used a local copy of Sage to process the |.sage| -% script. (With some minor limitations and differences; see below.) -% -% One important point: \emph{the script requires Python 2.6}. It will -% not work with earlier versions. (It will work with Python 3.0 or later -% with some trivial changes.) -% -% You can provide the server, username and password with the -% command-line switches |--server|, |--username|, and |--password|, or -% you can put that information into a file and use the |--file| switch -% to specify that file. The format of the file must be like the -% following: -% \begin{verbatim} - # hash mark at beginning of line marks a comment - server = "http://example.com:1234" - username = 'my_user_name' - password = 's33krit'\end{verbatim} -% As you can see, it's really just like assigning a string to a variable -% in Python. You can use single or double quotes and use hash marks to -% start comments. You can't have comments on the same line as an -% assignment, though. You can omit any of those pieces of information -% information; the script will ask for anything it needs to know. -% Information provided as a command line switch takes precedence over -% anything found in the file. -% -% You can keep this file separate from your \LTX documents in a secure -% location; for example, on a USB thumb drive or in an automatically -% encrypted directory (like |~/Private| in Ubuntu). This makes it much -% harder to accidentally upload your private login information to the -% arXiv, put it on a website, send it to a colleague, or otherwise make -% your private information public. -% -% \subsection{Limitations of \texttt{remote-sagetex.py}} -% \label{sec:remote-sagetex-limitations} -% -% The |remote-sagetex.py| script has several limitations. It completely -% ignores the |epstopdf| and |imagemagick| flags. The |epstopdf| flag is -% not a big deal, since it was originally introduced to work around a -% matplotlib bug which has since been fixed. Not having |imagemagick| -% support means that you cannot automatically convert 3D graphics to eps -% format; using |pdflatex| to make PDFs works around this issue. -% -% -% \subsection{Other caveats} -% \label{sec:remote-sagetex-caveats} -% -% Right now, the ``simple server API'' that |remote-sagetex.py| uses is -% not terribly robust, and if you interrupt the script, it's possible to -% leave an idle session running on the server. If many idle sessions -% accumulate on the server, it can use up a lot of memory and cause the -% server to be slow, unresponsive, or maybe even crash. For now, I -% recommend that you only run the script manually. It's probably best to -% not configure your \TeX{} editing environment to automatically run -% |remote-sagetex.py| whenever you typeset your document, at least not -% without showing you the output or alerting you about errors. -% - - -% \iffalse -% Local Variables: -% mode: doctex -% TeX-master: t -% End: -% \fi diff --git a/Master/texmf-dist/source/latex/sagetex/sagetexpackage.ins b/Master/texmf-dist/source/latex/sagetex/sagetexpackage.ins deleted file mode 100644 index f759ec4ad71..00000000000 --- a/Master/texmf-dist/source/latex/sagetex/sagetexpackage.ins +++ /dev/null @@ -1,124 +0,0 @@ -%% This is `sagetexpackage.ins', part of the sagetex package. -%% -%% Copyright (C) 2009 by Dan Drake <ddrake@member.ams.org> -%% -%% This program is free software: you can redistribute it and/or modify -%% it under the terms of the GNU General Public License as published by -%% the Free Software Foundation, either version 2 of the License, or (at -%% your option) any later version. -%% -%% This program is distributed in the hope that it will be useful, but -%% WITHOUT ANY WARRANTY; without even the implied warranty of -%% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -%% General Public License for more details. -%% -%% You should have received a copy of the GNU General Public License -%% along with this program. If not, see <http://www.gnu.org/licenses/>. - -\input docstrip.tex -\keepsilent - -\usedir{tex/latex/sagetex} - -\declarepreamble\defaultpreamble - -This is a generated file. It is part of the SageTeX package. - -Copyright (C) 2009 by Dan Drake <ddrake@member.ams.org> - -This program is free software: you can redistribute it and/or modify it -under the terms of the GNU General Public License as published by the -Free Software Foundation, either version 2 of the License, or (at your -option) any later version. - -This program is distributed in the hope that it will be useful, but -WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General -Public License for more details. - -You should have received a copy of the GNU General Public License along -with this program. If not, see <http://www.gnu.org/licenses/>. - -\endpreamble - -% We use a name other than `sagetex' because when using the sagetex -% package in a file called `foo.dtx', a file `foo.py' will be -% produced---and below, we generate a file called sagetex.py. Thus we -% use a name other than `sagetex.dtx' so that building the documentation -% doesn't clobber the very Python file we need to build the -% documentation! - -\generate{\file{sagetex.sty}{\from{sagetexpackage.dtx}{latex} - \from{py-and-sty.dtx}{latex}}} - -% Define a new preamble with #'s as comment characters for the Python -% files. I hate copying the same text, but defining a "\boilerplate" -% macro requires me to manually do \MetaPrefix\space and ^^J everywhere -% and it's more annoying than this. - -\catcode`\#=12 -\def\hash{#} -\catcode`\#=6 - -\def\MetaPrefix{\hash\hash} -\declarepreamble\pypreamble - -This is a generated file. It is part of the SageTeX package. - -Copyright (C) 2009 by Dan Drake <ddrake@member.ams.org> - -This program is free software: you can redistribute it and/or modify it -under the terms of the GNU General Public License as published by the -Free Software Foundation, either version 2 of the License, or (at your -option) any later version. - -This program is distributed in the hope that it will be useful, but -WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General -Public License for more details. - -You should have received a copy of the GNU General Public License along -with this program. If not, see <http://www.gnu.org/licenses/>. - -\endpreamble -\usepreamble\pypreamble -\nopostamble - -\generate{\file{sagetex.py}{\from{sagetexpackage.dtx}{python} - \from{py-and-sty.dtx}{python}}} -\generate{\file{sagetexparse.py}{\from{scripts.dtx}{parsermod}}} - -% Now define a new preamble with the shebang line at the top. - -\def\envpypreamble{\hash!/usr/bin/env python^^J\pypreamble} -\usepreamble\envpypreamble - -\generate{\file{makestatic.py}{\from{scripts.dtx}{staticscript}}} -\generate{\file{extractsagecode.py}{\from{scripts.dtx}{extractscript}}} -\generate{\file{remote-sagetex.py}{\from{remote-sagetex.dtx}{remotesagetex}}} - -\obeyspaces -\Msg{******************************************************************} -\Msg{* *} -\Msg{* To finish the installation, move the following files *} -\Msg{* into directories searched by TeX and Sage, respectively: *} -\Msg{* *} -\Msg{* sagetex.sty *} -\Msg{* sagetex.py *} -\Msg{* *} -\Msg{* See the documentation for complete installation details. *} -\Msg{* *} -\Msg{* To produce the documentation run the file sagetex.dtx through *} -\Msg{* LaTeX. To produce the change history, run *} -\Msg{* *} -\Msg{* makeindex -s gglo.ist -o sagetexpackage.gls sagetexpackage.glo *} -\Msg{* *} -\Msg{* and to get the regular index, do *} -\Msg{* *} -\Msg{* makeindex -s gind.ist -o sagetexpackage.ind sagetexpackage.idx *} -\Msg{* *} -\Msg{* Happy TeXing...and, uh, Saging? *} -\Msg{* *} -\Msg{******************************************************************} - -\endbatchfile diff --git a/Master/texmf-dist/source/latex/sagetex/scripts.dtx b/Master/texmf-dist/source/latex/sagetex/scripts.dtx deleted file mode 100644 index 40914a4165b..00000000000 --- a/Master/texmf-dist/source/latex/sagetex/scripts.dtx +++ /dev/null @@ -1,424 +0,0 @@ -% \section{Included Python scripts} -% \label{sec:included-scripts} -% -% Here we describe the Python code for |makestatic.py|, which removes -% \ST commands to produce a ``static'' file, and |extractsagecode.py|, -% which extracts all the Sage code from a |.tex| file. -% -% \subsection{makestatic.py} -% \label{sec:makestatic} -% \iffalse -%<*staticscript> -% \fi -% -% First, |makestatic.py| script. It's about the most basic, generic -% Python script taking command-line arguments that you'll find. The -% |#!/usr/bin/env python| line is provided for us by the |.ins| file's -% preamble, so we don't put it here. -% \begin{macrocode} -import sys -import time -import getopt -import os.path -from sagetexparse import DeSageTex - -def usage(): - print("""Usage: %s [-h|--help] [-o|--overwrite] inputfile [outputfile] - -Removes SageTeX macros from `inputfile' and replaces them with the -Sage-computed results to make a "static" file. You'll need to have run -Sage on `inputfile' already. - -`inputfile' can include the .tex extension or not. If you provide -`outputfile', the results will be written to a file of that name. -Specify `-o' or `--overwrite' to overwrite the file if it exists. - -See the SageTeX documentation for more details.""" % sys.argv[0]) - -try: - opts, args = getopt.getopt(sys.argv[1:], 'ho', ['help', 'overwrite']) -except getopt.GetoptError, err: - print str(err) - usage() - sys.exit(2) - -overwrite = False -for o, a in opts: - if o in ('-h', '--help'): - usage() - sys.exit() - elif o in ('-o', '--overwrite'): - overwrite = True - -if len(args) == 0 or len(args) > 2: - print('Error: wrong number of arguments. Make sure to specify options first.\n') - usage() - sys.exit(2) - -if len(args) == 2 and (os.path.exists(args[1]) and not overwrite): - print('Error: %s exists and overwrite option not specified.' % args[1]) - sys.exit(1) - -src, ext = os.path.splitext(args[0]) -% \end{macrocode} -% All the real work gets done in the line below. Sorry it's not more -% exciting-looking. -% \begin{macrocode} -desagetexed = DeSageTex(src) -% \end{macrocode} -% This part is cool: we need double percent signs at the beginning of -% the line because Python needs them (so they get turned into single -% percent signs) \emph{and} because \textsf{Docstrip} needs them (so the -% line gets passed into the generated file). It's perfect! -% \begin{macrocode} -header = """\ -%% SageTeX commands have been automatically removed from this file and -%% replaced with plain LaTeX. Processed %s. - -""" % time.strftime('%a %d %b %Y %H:%M:%S', time.localtime()) - -if len(args) == 2: - dest = open(args[1], 'w') -else: - dest = sys.stdout - -dest.write(header) -dest.write(desagetexed.result) -% \end{macrocode} -% -% \iffalse -%</staticscript> -%<*extractscript> -% \fi -% -% \subsection{extractsagecode.py} -% -% Same idea as |makestatic.py|, except this does basically the opposite -% thing. -% \begin{macrocode} -import sys -import time -import getopt -import os.path -from sagetexparse import SageCodeExtractor - -def usage(): - print("""Usage: %s [-h|--help] [-o|--overwrite] inputfile [outputfile] - -Extracts Sage code from `inputfile'. - -`inputfile' can include the .tex extension or not. If you provide -`outputfile', the results will be written to a file of that name, -otherwise the result will be printed to stdout. - -Specify `-o' or `--overwrite' to overwrite the file if it exists. - -See the SageTeX documentation for more details.""" % sys.argv[0]) - -try: - opts, args = getopt.getopt(sys.argv[1:], 'ho', ['help', 'overwrite']) -except getopt.GetoptError, err: - print str(err) - usage() - sys.exit(2) - -overwrite = False -for o, a in opts: - if o in ('-h', '--help'): - usage() - sys.exit() - elif o in ('-o', '--overwrite'): - overwrite = True - -if len(args) == 0 or len(args) > 2: - print('Error: wrong number of arguments. Make sure to specify options first.\n') - usage() - sys.exit(2) - -if len(args) == 2 and (os.path.exists(args[1]) and not overwrite): - print('Error: %s exists and overwrite option not specified.' % args[1]) - sys.exit(1) - -src, ext = os.path.splitext(args[0]) -sagecode = SageCodeExtractor(src) -header = """\ -# This file contains Sage code extracted from %s%s. -# Processed %s. - -""" % (src, ext, time.strftime('%a %d %b %Y %H:%M:%S', time.localtime())) - -if len(args) == 2: - dest = open(args[1], 'w') -else: - dest = sys.stdout - -dest.write(header) -dest.write(sagecode.result) -% \end{macrocode} -% -% \iffalse -%</extractscript> -%<*parsermod> -% \fi -% -% \subsection{The parser module} -% \changes{v2.2}{2009/06/17}{Update parser module to handle pause/unpause} -% -% Here's the module that does the actual parsing and replacing. It's -% really quite simple, thanks to the awesome -% \href{http://pyparsing.wikispaces.com}{Pyparsing module}. The parsing -% code below is nearly self-documenting! Compare that to fancy regular -% expressions, which sometimes look like someone sneezed punctuation all -% over the screen. -% \begin{macrocode} -import sys -from pyparsing import * -% \end{macrocode} -% First, we define this very helpful parser: it finds the matching -% bracket, and doesn't parse any of the intervening text. It's basically -% like hitting the percent sign in Vim. This is useful for parsing \LTX -% stuff, when you want to just grab everything enclosed by matching -% brackets. -% \begin{macrocode} -def skipToMatching(opener, closer): - nest = nestedExpr(opener, closer) - nest.setParseAction(lambda l, s, t: l[s:getTokensEndLoc()]) - return nest - -curlybrackets = skipToMatching('{', '}') -squarebrackets = skipToMatching('[', ']') -% \end{macrocode} -% Next, parser for |\sage|, |\sageplot|, and pause/unpause calls: -% \begin{macrocode} -sagemacroparser = r'\sage' + curlybrackets('code') -sageplotparser = (r'\sageplot' - + Optional(squarebrackets)('opts') - + Optional(squarebrackets)('format') - + curlybrackets('code')) -sagetexpause = Literal(r'\sagetexpause') -sagetexunpause = Literal(r'\sagetexunpause') -% \end{macrocode} -% -% With those defined, let's move on to our classes. -% -% \begin{macro}{SoutParser} -% Here's the parser for the generated |.sout| file. The code below does -% all the parsing of the |.sout| file and puts the results into a -% list. Notice that it's on the order of 10 lines of code---hooray -% for Pyparsing! -% \begin{macrocode} -class SoutParser(): - def __init__(self, fn): - self.label = [] -% \end{macrocode} -% A label line looks like -% \begin{quote} -% |\newlabel{@sageinline|\meta{integer}|}{|\marg{bunch of \LTX code}|{}{}{}{}}| -% \end{quote} -% which makes the parser definition below pretty obvious. We assign some -% names to the interesting bits so the |newlabel| method can make the -% \meta{integer} and \meta{bunch of \LTX code} into the keys and values -% of a dictionary. The |DeSageTeX| class then uses that dictionary to -% replace bits in the |.tex| file with their Sage-computed results. -% \begin{macrocode} - parselabel = (r'\newlabel{@sageinline' - + Word(nums)('num') - + '}{' - + curlybrackets('result') - + '{}{}{}{}}') -% \end{macrocode} -% We tell it to ignore comments, and hook up the list-making method. -% \begin{macrocode} - parselabel.ignore('%' + restOfLine) - parselabel.setParseAction(self.newlabel) -% \end{macrocode} -% A |.sout| file consists of one or more such lines. Now go parse the -% file we were given. -% \begin{macrocode} - try: - OneOrMore(parselabel).parseFile(fn) - except IOError: - print 'Error accessing %s; exiting. Does your .sout file exist?' % fn - sys.exit(1) -% \end{macrocode} -% Pyparser's parse actions get called with three arguments: the string -% that matched, the location of the beginning, and the resulting parse -% object. Here we just add a new key-value pair to the dictionary, -% remembering to strip off the enclosing brackets from the ``result'' -% bit. -% \begin{macrocode} - def newlabel(self, s, l, t): - self.label.append(t.result[1:-1]) -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{DeSageTeX} -% Now we define a parser for \LTX files that use \ST commands. We assume -% that the provided |fn| is just a basename. -% \begin{macrocode} -class DeSageTex(): - def __init__(self, fn): - self.sagen = 0 - self.plotn = 0 - self.fn = fn - self.sout = SoutParser(fn + '.sout') -% \end{macrocode} -% Parse |\sage| macros. We just need to pull in the result from the -% |.sout| file and increment the counter---that's what |self.sage| does. -% \begin{macrocode} - smacro = sagemacroparser - smacro.setParseAction(self.sage) -% \end{macrocode} -% Parse the |\usepackage{sagetex}| line. Right now we don't support -% comma-separated lists of packages. -% \begin{macrocode} - usepackage = (r'\usepackage' - + Optional(squarebrackets) - + '{sagetex}') - usepackage.setParseAction(replaceWith(r"""% "\usepackage{sagetex}" line was here: -\RequirePackage{verbatim} -\RequirePackage{graphicx} -\newcommand{\sagetexpause}{\relax} -\newcommand{\sagetexunpause}{\relax}""")) -% \end{macrocode} -% Parse |\sageplot| macros. -% \begin{macrocode} - splot = sageplotparser - splot.setParseAction(self.plot) -% \end{macrocode} -% The printed environments (|sageblock| and |sageverbatim|) get turned -% into |verbatim| environments. -% \begin{macrocode} - beginorend = oneOf('begin end') - blockorverb = 'sage' + oneOf('block verbatim') - blockorverb.setParseAction(replaceWith('verbatim')) - senv = '\\' + beginorend + '{' + blockorverb + '}' -% \end{macrocode} -% The non-printed |sagesilent| environment gets commented out. We could -% remove all the text, but this works and makes going back to \ST -% commands (de-de-\ST{}ing?) easier. -% \begin{macrocode} - silent = Literal('sagesilent') - silent.setParseAction(replaceWith('comment')) - ssilent = '\\' + beginorend + '{' + silent + '}' -% \end{macrocode} -% The |\sagetexindent| macro is no longer relevant, so remove it from -% the output (``suppress'', in Pyparsing terms). -% \begin{macrocode} - stexindent = Suppress(r'\setlength{\sagetexindent}' + curlybrackets) -% \end{macrocode} -% Now we define the parser that actually goes through the file. It just -% looks for any one of the above bits, while ignoring anything that -% should be ignored. -% \begin{macrocode} - doit = smacro | senv | ssilent | usepackage | splot | stexindent - doit.ignore('%' + restOfLine) - doit.ignore(r'\begin{verbatim}' + SkipTo(r'\end{verbatim}')) - doit.ignore(r'\begin{comment}' + SkipTo(r'\end{comment}')) - doit.ignore(r'\sagetexpause' + SkipTo(r'\sagetexunpause')) -% \end{macrocode} -% We can't use the |parseFile| method, because that expects a ``complete -% grammar'' in which everything falls into some piece of the parser. -% Instead we suck in the whole file as a single string, and run -% |transformString| on it, since that will just pick out the interesting -% bits and munge them according to the above definitions. -% \begin{macrocode} - str = ''.join(open(fn + '.tex', 'r').readlines()) - self.result = doit.transformString(str) -% \end{macrocode} -% That's the end of the class constructor, and it's all we need to do -% here. You access the results of parsing via the |result| string. -% -% We do have two methods to define. The first does the same thing that -% |\ref| does in your \LTX file: returns the content of the label and -% increments a counter. -% \begin{macrocode} - def sage(self, s, l, t): - self.sagen += 1 - return self.sout.label[self.sagen - 1] -% \end{macrocode} -% The second method returns the appropriate |\includegraphics| command. -% It does need to account for the default argument. -% \begin{macrocode} - def plot(self, s, l, t): - self.plotn += 1 - if len(t.opts) == 0: - opts = r'[width=.75\textwidth]' - else: - opts = t.opts[0] - return (r'\includegraphics%s{sage-plots-for-%s.tex/plot-%s}' % - (opts, self.fn, self.plotn - 1)) -% \end{macrocode} -% \end{macro} -% -% \begin{macro}{SageCodeExtractor} -% This class does the opposite of the first: instead of removing Sage -% stuff and leaving only \LTX, this removes all the \LTX and leaves only -% Sage. -% \begin{macrocode} -class SageCodeExtractor(): - def __init__(self, fn): - smacro = sagemacroparser - smacro.setParseAction(self.macroout) - - splot = sageplotparser - splot.setParseAction(self.plotout) -% \end{macrocode} -% Above, we used the general parsers for |\sage| and |\sageplot|. We -% have to redo the environment parsers because it seems too hard to -% define one parser object that will do both things we want: above, we -% just wanted to change the environment name, and here we want to suck -% out the code. Here, it's important that we find matching begin/end -% pairs; above it wasn't. At any rate, it's not a big deal to redo this -% parser. -% \begin{macrocode} - env_names = oneOf('sageblock sageverbatim sagesilent') - senv = r'\begin{' + env_names('env') + '}' + SkipTo( - r'\end{' + matchPreviousExpr(env_names) + '}')('code') - senv.leaveWhitespace() - senv.setParseAction(self.envout) - - spause = sagetexpause - spause.setParseAction(self.pause) - - sunpause = sagetexunpause - sunpause.setParseAction(self.unpause) - - doit = smacro | splot | senv | spause | sunpause - - str = ''.join(open(fn + '.tex', 'r').readlines()) - self.result = '' - - doit.transformString(str) - - def macroout(self, s, l, t): - self.result += '# \\sage{} from line %s\n' % lineno(l, s) - self.result += t.code[1:-1] + '\n\n' - - def plotout(self, s, l, t): - self.result += '# \\sageplot{} from line %s:\n' % lineno(l, s) - if t.format is not '': - self.result += '# format: %s' % t.format[0][1:-1] + '\n' - self.result += t.code[1:-1] + '\n\n' - - def envout(self, s, l, t): - self.result += '# %s environment from line %s:' % (t.env, - lineno(l, s)) - self.result += t.code[0] + '\n' - - def pause(self, s, l, t): - self.result += ('# SageTeX (probably) paused on input line %s.\n\n' % - (lineno(l, s))) - - def unpause(self, s, l, t): - self.result += ('# SageTeX (probably) unpaused on input line %s.\n\n' % - (lineno(l, s))) -% \end{macrocode} -% \end{macro} - -% \endinput -%</parsermod> -% Local Variables: -% mode: doctex -% TeX-master: "sagetexpackage" -% End: diff --git a/Master/texmf-dist/tex/latex/sagetex/sagetex.sty b/Master/texmf-dist/tex/latex/sagetex/sagetex.sty deleted file mode 100644 index 79fccf61d07..00000000000 --- a/Master/texmf-dist/tex/latex/sagetex/sagetex.sty +++ /dev/null @@ -1,161 +0,0 @@ -%% -%% This is file `sagetex.sty', -%% generated with the docstrip utility. -%% -%% The original source files were: -%% -%% sagetexpackage.dtx (with options: `latex') -%% py-and-sty.dtx (with options: `latex') -%% -%% This is a generated file. It is part of the SageTeX package. -%% -%% Copyright (C) 2009 by Dan Drake <ddrake@member.ams.org> -%% -%% This program is free software: you can redistribute it and/or modify it -%% under the terms of the GNU General Public License as published by the -%% Free Software Foundation, either version 2 of the License, or (at your -%% option) any later version. -%% -%% This program is distributed in the hope that it will be useful, but -%% WITHOUT ANY WARRANTY; without even the implied warranty of -%% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General -%% Public License for more details. -%% -%% You should have received a copy of the GNU General Public License along -%% with this program. If not, see <http://www.gnu.org/licenses/>. -%% -\NeedsTeXFormat{LaTeX2e} -\ProvidesPackage{sagetex} - [2009/06/17 v2.2.1 embedding Sage into LaTeX documents] -\RequirePackage{verbatim} -\RequirePackage{graphicx} -\RequirePackage{makecmds} -\RequirePackage{ifpdf} -\RequirePackage{ifthen} -\newcounter{ST@inline} -\newcounter{ST@plot} -\setcounter{ST@inline}{0} -\setcounter{ST@plot}{0} -\newlength{\sagetexindent} -\setlength{\sagetexindent}{5ex} -\newif\ifST@paused -\ST@pausedfalse -\AtBeginDocument{\@ifundefined{ST@final}{% -\newwrite\ST@sf% -\immediate\openout\ST@sf=\jobname.sage% -\newcommand{\ST@wsf}[1]{\immediate\write\ST@sf{#1}}% -\ST@wsf{# This file (\jobname.sage) was *autogenerated* from the file \jobname.tex.}% -\ST@wsf{import sagetex}% -\ST@wsf{_st_ = sagetex.SageTeXProcessor('\jobname')}}% -{\newcommand{\ST@wsf}[1]{\relax}}} -\DeclareOption{final}{% - \newcommand{\ST@final}{x}% - \IfFileExists{\jobname.sout}{}{\AtEndDocument{\PackageWarningNoLine{sagetex}% - {`final' option provided, but \jobname.sout^^Jdoesn't exist! No Sage - input will appear in your document. Remove the `final'^^Joption and - rerun LaTeX on your document}}}} -\DeclareOption{imagemagick}{% - \newcommand{\ST@useimagemagick}{x}% - \AtBeginDocument{% - \@ifundefined{ST@final}{% - \ST@wsf{_st_.useimagemagick = True}}{}}} -\DeclareOption{epstopdf}{% -\AtBeginDocument{% -\@ifundefined{ST@final}{% - \ST@wsf{_st_.useepstopdf = True}}{}}} -\ProcessOptions\relax -\InputIfFileExists{\jobname.sout}{}{\typeout{No file \jobname.sout.}} -\AtBeginDocument{\provideenvironment{NoHyper}{}{}} -\newcommand{\sage}[1]{\ST@wsf{% -try:^^J - _st_.inline(\theST@inline, #1)^^Jexcept:^^J - _st_.goboom(\the\inputlineno)}% -\ifST@paused - \mbox{(Sage\TeX{} is paused)}% -\else - \begin{NoHyper}\ref{@sageinline\theST@inline}\end{NoHyper} - \@ifundefined{r@@sageinline\theST@inline}{\gdef\ST@rerun{x}}{} -\fi -\stepcounter{ST@inline}} -\catcode`\%=12 -\newcommand{\percent}{%} -\catcode`\%=14 -\newcommand{\ST@plotdir}{sage-plots-for-\jobname.tex} -\newcommand{\ST@missingfilebox}{\framebox[2cm]{\rule[-1cm]{0cm}{2cm}\textbf{??}}} -\newcommand{\sageplot}[1][width=.75\textwidth]{% - \@ifnextchar[{\ST@sageplot[#1]}{\ST@sageplot[#1][notprovided]}} -\def\ST@sageplot[#1][#2]#3{\ST@wsf{try:^^J - _st_.plot(\theST@plot, format='#2', _p_=#3)^^Jexcept:^^J - _st_.goboom(\the\inputlineno)}% -\ifpdf - \ifthenelse{\equal{#2}{notprovided}}% - {\ST@inclgrfx{#1}{pdf}}% - {\ST@inclgrfx{#1}{#2}}% -\else - \ifthenelse{\equal{#2}{notprovided}}% - {\ST@inclgrfx{#1}{eps}}% - {\@ifundefined{ST@useimagemagick}% - {\IfFileExists{\ST@plotdir/plot-\theST@plot.#2}% - {\ST@missingfilebox% - \PackageWarning{sagetex}{Graphics file - \ST@plotdir/plot-\theST@plot.#2\space on page \thepage\space - cannot be used with DVI output. Use pdflatex or create an EPS - file. Plot command is}}% - {\ST@missingfilebox% - \PackageWarning{sagetex}{Graphics file - \ST@plotdir/plot-\theST@plot.#2\space on page \thepage\space - does not exist. Plot command is}% - \gdef\ST@rerun{x}}}% - {\ST@inclgrfx{#1}{eps}}}% -\fi -\stepcounter{ST@plot}} -\newcommand{\ST@inclgrfx}[2]{\ifST@paused - \fbox{\rule[-1cm]{0cm}{2cm}Sage\TeX{} is paused; no graphic} -\else - \IfFileExists{\ST@plotdir/plot-\theST@plot.#2}% - {\includegraphics[#1]{\ST@plotdir/plot-\theST@plot.#2}}% - {\ST@missingfilebox% - \PackageWarning{sagetex}{Graphics file - \ST@plotdir/plot-\theST@plot.#2\space on page \thepage\space does not - exist. Plot command is}% - \gdef\ST@rerun{x}} -\fi} -\newcommand{\ST@beginsfbl}{% - \@bsphack\ST@wsf{% -_st_.blockbegin()^^Jtry:}% - \let\do\@makeother\dospecials\catcode`\^^M\active} -\newcommand{\ST@endsfbl}{% -\ST@wsf{except:^^J - _st_.goboom(\the\inputlineno)^^J_st_.blockend()}} -\newenvironment{sageblock}{\ST@beginsfbl% -\def\verbatim@processline{\ST@wsf{ \the\verbatim@line}% -\hspace{\sagetexindent}\the\verbatim@line\par}% -\verbatim}% -{\ST@endsfbl\endverbatim} -\newenvironment{sagesilent}{\ST@beginsfbl% -\def\verbatim@processline{\ST@wsf{ \the\verbatim@line}}% -\verbatim@start}% -{\ST@endsfbl\@esphack} -\newenvironment{sageverbatim}{% -\def\verbatim@processline{\hspace{\sagetexindent}\the\verbatim@line\par}% -\verbatim}% -{\endverbatim} -\newcommand{\sagetexpause}{\ifST@paused\relax\else -\ST@wsf{print 'SageTeX paused on \jobname.tex line \the\inputlineno'^^J"""} -\ST@pausedtrue -\fi} -\newcommand{\sagetexunpause}{\ifST@paused -\ST@wsf{"""^^Jprint 'SageTeX unpaused on \jobname.tex line \the\inputlineno'} -\ST@pausedfalse -\fi} -\AtEndDocument{\ifST@paused -\ST@wsf{"""^^Jprint 'SageTeX unpaused at end of \jobname.tex'} -\fi -\ST@wsf{_st_.endofdoc()}% -\@ifundefined{ST@rerun}{}% -{\PackageWarningNoLine{sagetex}{There were undefined Sage formulas -and/or plots.^^JRun Sage on \jobname.sage, and then run -LaTeX on \jobname.tex again}}} -\endinput -%% -%% End of file `sagetex.sty'. diff --git a/Master/tlpkg/bin/tlpkg-ctan-check b/Master/tlpkg/bin/tlpkg-ctan-check index c61f998d84f..904d1744552 100755 --- a/Master/tlpkg/bin/tlpkg-ctan-check +++ b/Master/tlpkg/bin/tlpkg-ctan-check @@ -230,7 +230,7 @@ my @WorkingTLP = qw( rjlparshap robustcommand robustindex romannum rotating rsc rsfs rtkinenc rtklage ryethesis - sageep sagetex sauerj sauterfonts savefnmark savesym savetrees scale + sageep sauerj sauterfonts savefnmark savesym savetrees scale scalebar schemabloc scientificpaper sciposter screenplay script sdrt sectionbox sectsty selectp semantic semaphor seminar semioneside seqsplit setspace sf298 sffms sfg sfheaders diff --git a/Master/tlpkg/libexec/ctan2tds b/Master/tlpkg/libexec/ctan2tds index e91b3fa7ed2..001de0fd5d3 100755 --- a/Master/tlpkg/libexec/ctan2tds +++ b/Master/tlpkg/libexec/ctan2tds @@ -546,6 +546,7 @@ $Master = "$mydir/../.."; 'rsfs', "&MAKEflatten", 'rst', "die 'skipping, nonfree license'", 'sae', "die 'skipping, nosell'", + 'sagetex', "die 'skipping, omitted at author request (25 Jan 2010 19:50:16)'", 'schedule', "die 'skipping, noinfo, too old to matter'", 'scripttex', "die 'skipping, nosell'", 'seminar', "&MAKEseminar", diff --git a/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc b/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc index f4b87894fb5..777f900eadb 100644 --- a/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc +++ b/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc @@ -477,7 +477,6 @@ depend romannum depend rotfloat depend rotpages depend rtkinenc -depend sagetex depend sauerj depend savefnmark depend savesym diff --git a/Master/tlpkg/tlpsrc/sagetex.tlpsrc b/Master/tlpkg/tlpsrc/sagetex.tlpsrc deleted file mode 100644 index e69de29bb2d..00000000000 --- a/Master/tlpkg/tlpsrc/sagetex.tlpsrc +++ /dev/null |