summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rwxr-xr-xBuild/source/build-aux/depcomp407
-rwxr-xr-xBuild/source/extra/xz/build-aux/depcomp407
-rwxr-xr-xBuild/source/libs/cairo/cairo-1.12.8/build/depcomp454
3 files changed, 678 insertions, 590 deletions
diff --git a/Build/source/build-aux/depcomp b/Build/source/build-aux/depcomp
index e1f51f482a9..3f02f5d0086 100755
--- a/Build/source/build-aux/depcomp
+++ b/Build/source/build-aux/depcomp
@@ -1,7 +1,7 @@
#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
-scriptversion=2012-07-12.20; # UTC
+scriptversion=2012-10-18.11; # UTC
# Copyright (C) 1999-2012 Free Software Foundation, Inc.
@@ -27,9 +27,9 @@ scriptversion=2012-07-12.20; # UTC
case $1 in
'')
- echo "$0: No command. Try '$0 --help' for more information." 1>&2
- exit 1;
- ;;
+ echo "$0: No command. Try '$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
-h | --h*)
cat <<\EOF
Usage: depcomp [--help] [--version] PROGRAM [ARGS]
@@ -56,11 +56,65 @@ EOF
;;
esac
+# Get the directory component of the given path, and save it in the
+# global variables '$dir'. Note that this directory component will
+# be either empty or ending with a '/' character. This is deliberate.
+set_dir_from ()
+{
+ case $1 in
+ */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
+ *) dir=;;
+ esac
+}
+
+# Get the suffix-stripped basename of the given path, and save it the
+# global variable '$base'.
+set_base_from ()
+{
+ base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
+}
+
+# If no dependency file was actually created by the compiler invocation,
+# we still have to create a dummy depfile, to avoid errors with the
+# Makefile "include basename.Plo" scheme.
+make_dummy_depfile ()
+{
+ echo "#dummy" > "$depfile"
+}
+
+# Factor out some common post-processing of the generated depfile.
+# Requires the auxiliary global variable '$tmpdepfile' to be set.
+aix_post_process_depfile ()
+{
+ # If the compiler actually managed to produce a dependency file,
+ # post-process it.
+ if test -f "$tmpdepfile"; then
+ # Each line is of the form 'foo.o: dependency.h'.
+ # Do two passes, one to just change these to
+ # $object: dependency.h
+ # and one to simply output
+ # dependency.h:
+ # which is needed to avoid the deleted-header problem.
+ { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
+ sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
+ } > "$depfile"
+ rm -f "$tmpdepfile"
+ else
+ make_dummy_depfile
+ fi
+}
+
# A tabulation character.
tab=' '
# A newline character.
nl='
'
+# Character ranges might be problematic outside the C locale.
+# These definitions help.
+upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
+lower=abcdefghijklmnopqrstuvwxyz
+digits=0123456789
+alpha=${upper}${lower}
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
echo "depcomp: Variables source, object and depmode must be set" 1>&2
@@ -88,32 +142,32 @@ if test "$depmode" = hp; then
fi
if test "$depmode" = dashXmstdout; then
- # This is just like dashmstdout with a different argument.
- dashmflag=-xM
- depmode=dashmstdout
+ # This is just like dashmstdout with a different argument.
+ dashmflag=-xM
+ depmode=dashmstdout
fi
cygpath_u="cygpath -u -f -"
if test "$depmode" = msvcmsys; then
- # This is just like msvisualcpp but w/o cygpath translation.
- # Just convert the backslash-escaped backslashes to single forward
- # slashes to satisfy depend.m4
- cygpath_u='sed s,\\\\,/,g'
- depmode=msvisualcpp
+ # This is just like msvisualcpp but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u='sed s,\\\\,/,g'
+ depmode=msvisualcpp
fi
if test "$depmode" = msvc7msys; then
- # This is just like msvc7 but w/o cygpath translation.
- # Just convert the backslash-escaped backslashes to single forward
- # slashes to satisfy depend.m4
- cygpath_u='sed s,\\\\,/,g'
- depmode=msvc7
+ # This is just like msvc7 but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u='sed s,\\\\,/,g'
+ depmode=msvc7
fi
if test "$depmode" = xlc; then
- # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
- gccflag=-qmakedep=gcc,-MF
- depmode=gcc
+ # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
+ gccflag=-qmakedep=gcc,-MF
+ depmode=gcc
fi
case "$depmode" in
@@ -136,8 +190,7 @@ gcc3)
done
"$@"
stat=$?
- if test $stat -eq 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
@@ -163,15 +216,14 @@ gcc)
fi
"$@" -Wp,"$gccflag$tmpdepfile"
stat=$?
- if test $stat -eq 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
- alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
+ # The second -e expression handles DOS-style file names with drive
+ # letters.
sed -e 's/^[^:]*: / /' \
-e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
## This next piece of magic avoids the "deleted header file" problem.
@@ -180,15 +232,15 @@ gcc)
## typically no way to rebuild the header). We avoid this by adding
## dummy dependencies for each header file. Too bad gcc doesn't do
## this for us directly.
- tr ' ' "$nl" < "$tmpdepfile" |
## Some versions of gcc put a space before the ':'. On the theory
## that the space means something, we add a space to the output as
## well. hp depmode also adds that space, but also prefixes the VPATH
## to the object. Take care to not repeat it in the output.
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
- | sed -e 's/$/ :/' >> "$depfile"
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
@@ -206,8 +258,7 @@ sgi)
"$@" -MDupdate "$tmpdepfile"
fi
stat=$?
- if test $stat -eq 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
@@ -215,7 +266,6 @@ sgi)
if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
echo "$object : \\" > "$depfile"
-
# Clip off the initial element (the dependent). Don't try to be
# clever and replace this with sed code, as IRIX sed won't handle
# lines with more than a fixed number of characters (4096 in
@@ -223,19 +273,15 @@ sgi)
# the IRIX cc adds comments like '#:fec' to the end of the
# dependency line.
tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
- tr "$nl" ' ' >> "$depfile"
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
+ | tr "$nl" ' ' >> "$depfile"
echo >> "$depfile"
-
# The second pass generates a dummy entry for each header file.
tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
- >> "$depfile"
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+ >> "$depfile"
else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
+ make_dummy_depfile
fi
rm -f "$tmpdepfile"
;;
@@ -253,9 +299,8 @@ aix)
# current directory. Also, the AIX compiler puts '$object:' at the
# start of each line; $object doesn't have directory information.
# Version 6 uses the directory in both cases.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ set_dir_from "$object"
+ set_base_from "$object"
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.u
tmpdepfile2=$base.u
@@ -268,9 +313,7 @@ aix)
"$@" -M
fi
stat=$?
-
- if test $stat -eq 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
exit $stat
fi
@@ -279,65 +322,37 @@ aix)
do
test -f "$tmpdepfile" && break
done
- if test -f "$tmpdepfile"; then
- # Each line is of the form 'foo.o: dependent.h'.
- # Do two passes, one to just change these to
- # '$object: dependent.h' and one to simply 'dependent.h:'.
- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
+ aix_post_process_depfile
;;
-icc)
- # Intel's C compiler anf tcc (Tiny C Compiler) understand '-MD -MF file'.
- # However on
- # $CC -MD -MF foo.d -c -o sub/foo.o sub/foo.c
- # ICC 7.0 will fill foo.d with something like
- # foo.o: sub/foo.c
- # foo.o: sub/foo.h
- # which is wrong. We want
- # sub/foo.o: sub/foo.c
- # sub/foo.o: sub/foo.h
- # sub/foo.c:
- # sub/foo.h:
- # ICC 7.1 will output
- # foo.o: sub/foo.c sub/foo.h
- # and will wrap long lines using '\':
- # foo.o: sub/foo.c ... \
- # sub/foo.h ... \
- # ...
- # tcc 0.9.26 (FIXME still under development at the moment of writing)
- # will emit a similar output, but also prepend the continuation lines
- # with horizontal tabulation characters.
+tcc)
+ # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
+ # FIXME: That version still under development at the moment of writing.
+ # Make that this statement remains true also for stable, released
+ # versions.
+ # It will wrap lines (doesn't matter whether long or short) with a
+ # trailing '\', as in:
+ #
+ # foo.o : \
+ # foo.c \
+ # foo.h \
+ #
+ # It will put a trailing '\' even on the last line, and will use leading
+ # spaces rather than leading tabs (at least since its commit 0394caf7
+ # "Emit spaces for -MD").
"$@" -MD -MF "$tmpdepfile"
stat=$?
- if test $stat -eq 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
- # Each line is of the form 'foo.o: dependent.h',
- # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'.
- # Do two passes, one to just change these to
- # '$object: dependent.h' and one to simply 'dependent.h:'.
- sed -e "s/^[ $tab][ $tab]*/ /" -e "s,^[^:]*:,$object :," \
- < "$tmpdepfile" > "$depfile"
- sed '
- s/[ '"$tab"'][ '"$tab"']*/ /g
- s/^ *//
- s/ *\\*$//
- s/^[^:]*: *//
- /^$/d
- /:$/d
- s/$/ :/
- ' < "$tmpdepfile" >> "$depfile"
+ # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
+ # We have to change lines of the first kind to '$object: \'.
+ sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
+ # And for each line of the second kind, we have to emit a 'dep.h:'
+ # dummy dependency, to avoid the deleted-header problem.
+ sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
rm -f "$tmpdepfile"
;;
@@ -356,34 +371,37 @@ pgcc)
# foo.o: sub/foo.c ... \
# sub/foo.h ... \
# ...
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
+ set_dir_from "$object"
# Use the source, not the object, to determine the base name, since
# that's sadly what pgcc will do too.
- base=`echo "$source" | sed -e 's|^.*/||' -e 's/\.[-_a-zA-Z0-9]*$//'`
- tmpdepfile="$base.d"
+ set_base_from "$source"
+ tmpdepfile=$base.d
# For projects that build the same source file twice into different object
# files, the pgcc approach of using the *source* file root name can cause
# problems in parallel builds. Use a locking strategy to avoid stomping on
# the same $tmpdepfile.
- lockdir="$base.d-lock"
- trap "echo '$0: caught signal, cleaning up...' >&2; rm -rf $lockdir" 1 2 13 15
+ lockdir=$base.d-lock
+ trap "
+ echo '$0: caught signal, cleaning up...' >&2
+ rmdir '$lockdir'
+ exit 1
+ " 1 2 13 15
numtries=100
i=$numtries
- while test $i -gt 0 ; do
+ while test $i -gt 0; do
# mkdir is a portable test-and-set.
- if mkdir $lockdir 2>/dev/null; then
+ if mkdir "$lockdir" 2>/dev/null; then
# This process acquired the lock.
"$@" -MD
stat=$?
# Release the lock.
- rm -rf $lockdir
+ rmdir "$lockdir"
break
else
- ## the lock is being held by a different process,
- ## wait until the winning process is done or we timeout
- while test -d $lockdir && test $i -gt 0; do
+ # If the lock is being held by a different process, wait
+ # until the winning process is done or we timeout.
+ while test -d "$lockdir" && test $i -gt 0; do
sleep 1
i=`expr $i - 1`
done
@@ -409,8 +427,8 @@ pgcc)
sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
# Some versions of the HPUX 10.20 sed can't process this invocation
# correctly. Breaking it into two sed invocations is a workaround.
- sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
- sed -e 's/$/ :/' >> "$depfile"
+ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
+ | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
@@ -421,9 +439,8 @@ hp2)
# 'foo.d', which lands next to the object file, wherever that
# happens to be.
# Much of this is similar to the tru64 case; see comments there.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ set_dir_from "$object"
+ set_base_from "$object"
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir.libs/$base.d
@@ -434,8 +451,7 @@ hp2)
"$@" +Maked
fi
stat=$?
- if test $stat -eq 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile1" "$tmpdepfile2"
exit $stat
fi
@@ -445,76 +461,61 @@ hp2)
test -f "$tmpdepfile" && break
done
if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+ sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
# Add 'dependent.h:' lines.
sed -ne '2,${
- s/^ *//
- s/ \\*$//
- s/$/:/
- p
- }' "$tmpdepfile" >> "$depfile"
+ s/^ *//
+ s/ \\*$//
+ s/$/:/
+ p
+ }' "$tmpdepfile" >> "$depfile"
else
- echo "#dummy" > "$depfile"
+ make_dummy_depfile
fi
rm -f "$tmpdepfile" "$tmpdepfile2"
;;
tru64)
- # The Tru64 compiler uses -MD to generate dependencies as a side
- # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
- # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
- # dependencies in 'foo.d' instead, so we check for that too.
- # Subdirectories are respected.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
- if test "$libtool" = yes; then
- # With Tru64 cc, shared objects can also be used to make a
- # static library. This mechanism is used in libtool 1.4 series to
- # handle both shared and static libraries in a single compilation.
- # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
- #
- # With libtool 1.5 this exception was removed, and libtool now
- # generates 2 separate objects for the 2 libraries. These two
- # compilations output dependencies in $dir.libs/$base.o.d and
- # in $dir$base.o.d. We have to check for both files, because
- # one of the two compilations can be disabled. We should prefer
- # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
- # automatically cleaned when .libs/ is deleted, while ignoring
- # the former would cause a distcleancheck panic.
- tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
- tmpdepfile2=$dir$base.o.d # libtool 1.5
- tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
- tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
- "$@" -Wc,-MD
- else
- tmpdepfile1=$dir$base.o.d
- tmpdepfile2=$dir$base.d
- tmpdepfile3=$dir$base.d
- tmpdepfile4=$dir$base.d
- "$@" -MD
- fi
-
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
- do
- test -f "$tmpdepfile" && break
- done
- if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
- else
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
+ # The Tru64 compiler uses -MD to generate dependencies as a side
+ # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # dependencies in 'foo.d' instead, so we check for that too.
+ # Subdirectories are respected.
+ set_dir_from "$object"
+ set_base_from "$object"
+
+ if test "$libtool" = yes; then
+ # Libtool generates 2 separate objects for the 2 libraries. These
+ # two compilations output dependencies in $dir.libs/$base.o.d and
+ # in $dir$base.o.d. We have to check for both files, because
+ # one of the two compilations can be disabled. We should prefer
+ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+ # automatically cleaned when .libs/ is deleted, while ignoring
+ # the former would cause a distcleancheck panic.
+ tmpdepfile1=$dir$base.o.d # libtool 1.5
+ tmpdepfile2=$dir.libs/$base.o.d # Likewise.
+ tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504
+ "$@" -Wc,-MD
+ else
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir$base.d
+ tmpdepfile3=$dir$base.d
+ "$@" -MD
+ fi
+
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ # Same post-processing that is required for AIX mode.
+ aix_post_process_depfile
+ ;;
msvc7)
if test "$libtool" = yes; then
@@ -525,8 +526,7 @@ msvc7)
"$@" $showIncludes > "$tmpdepfile"
stat=$?
grep -v '^Note: including file: ' "$tmpdepfile"
- if test "$stat" = 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
@@ -603,13 +603,14 @@ dashmstdout)
# in the target name. This is to cope with DOS-style filenames:
# a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
"$@" $dashmflag |
- sed 's:^['"$tab"' ]*[^:'"$tab"' ][^:][^:]*\:['"$tab"' ]*:'"$object"'\: :' > "$tmpdepfile"
+ sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
- tr ' ' "$nl" < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process this sed invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
@@ -662,10 +663,12 @@ makedepend)
# makedepend may prepend the VPATH from the source file name to the object.
# No need to regex-escape $object, excess matching of '.' is harmless.
sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
- sed '1,2d' "$tmpdepfile" | tr ' ' "$nl" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process the last invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ sed '1,2d' "$tmpdepfile" \
+ | tr ' ' "$nl" \
+ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile" "$tmpdepfile".bak
;;
@@ -701,10 +704,10 @@ cpp)
esac
done
- "$@" -E |
- sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
- -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
- sed '$ s: \\$::' > "$tmpdepfile"
+ "$@" -E \
+ | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ | sed '$ s: \\$::' > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
cat < "$tmpdepfile" >> "$depfile"
@@ -736,15 +739,15 @@ msvisualcpp)
shift
;;
"-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
- set fnord "$@"
- shift
- shift
- ;;
+ set fnord "$@"
+ shift
+ shift
+ ;;
*)
- set fnord "$@" "$arg"
- shift
- shift
- ;;
+ set fnord "$@" "$arg"
+ shift
+ shift
+ ;;
esac
done
"$@" -E 2>/dev/null |
diff --git a/Build/source/extra/xz/build-aux/depcomp b/Build/source/extra/xz/build-aux/depcomp
index e1f51f482a9..3f02f5d0086 100755
--- a/Build/source/extra/xz/build-aux/depcomp
+++ b/Build/source/extra/xz/build-aux/depcomp
@@ -1,7 +1,7 @@
#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
-scriptversion=2012-07-12.20; # UTC
+scriptversion=2012-10-18.11; # UTC
# Copyright (C) 1999-2012 Free Software Foundation, Inc.
@@ -27,9 +27,9 @@ scriptversion=2012-07-12.20; # UTC
case $1 in
'')
- echo "$0: No command. Try '$0 --help' for more information." 1>&2
- exit 1;
- ;;
+ echo "$0: No command. Try '$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
-h | --h*)
cat <<\EOF
Usage: depcomp [--help] [--version] PROGRAM [ARGS]
@@ -56,11 +56,65 @@ EOF
;;
esac
+# Get the directory component of the given path, and save it in the
+# global variables '$dir'. Note that this directory component will
+# be either empty or ending with a '/' character. This is deliberate.
+set_dir_from ()
+{
+ case $1 in
+ */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
+ *) dir=;;
+ esac
+}
+
+# Get the suffix-stripped basename of the given path, and save it the
+# global variable '$base'.
+set_base_from ()
+{
+ base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
+}
+
+# If no dependency file was actually created by the compiler invocation,
+# we still have to create a dummy depfile, to avoid errors with the
+# Makefile "include basename.Plo" scheme.
+make_dummy_depfile ()
+{
+ echo "#dummy" > "$depfile"
+}
+
+# Factor out some common post-processing of the generated depfile.
+# Requires the auxiliary global variable '$tmpdepfile' to be set.
+aix_post_process_depfile ()
+{
+ # If the compiler actually managed to produce a dependency file,
+ # post-process it.
+ if test -f "$tmpdepfile"; then
+ # Each line is of the form 'foo.o: dependency.h'.
+ # Do two passes, one to just change these to
+ # $object: dependency.h
+ # and one to simply output
+ # dependency.h:
+ # which is needed to avoid the deleted-header problem.
+ { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
+ sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
+ } > "$depfile"
+ rm -f "$tmpdepfile"
+ else
+ make_dummy_depfile
+ fi
+}
+
# A tabulation character.
tab=' '
# A newline character.
nl='
'
+# Character ranges might be problematic outside the C locale.
+# These definitions help.
+upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
+lower=abcdefghijklmnopqrstuvwxyz
+digits=0123456789
+alpha=${upper}${lower}
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
echo "depcomp: Variables source, object and depmode must be set" 1>&2
@@ -88,32 +142,32 @@ if test "$depmode" = hp; then
fi
if test "$depmode" = dashXmstdout; then
- # This is just like dashmstdout with a different argument.
- dashmflag=-xM
- depmode=dashmstdout
+ # This is just like dashmstdout with a different argument.
+ dashmflag=-xM
+ depmode=dashmstdout
fi
cygpath_u="cygpath -u -f -"
if test "$depmode" = msvcmsys; then
- # This is just like msvisualcpp but w/o cygpath translation.
- # Just convert the backslash-escaped backslashes to single forward
- # slashes to satisfy depend.m4
- cygpath_u='sed s,\\\\,/,g'
- depmode=msvisualcpp
+ # This is just like msvisualcpp but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u='sed s,\\\\,/,g'
+ depmode=msvisualcpp
fi
if test "$depmode" = msvc7msys; then
- # This is just like msvc7 but w/o cygpath translation.
- # Just convert the backslash-escaped backslashes to single forward
- # slashes to satisfy depend.m4
- cygpath_u='sed s,\\\\,/,g'
- depmode=msvc7
+ # This is just like msvc7 but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u='sed s,\\\\,/,g'
+ depmode=msvc7
fi
if test "$depmode" = xlc; then
- # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
- gccflag=-qmakedep=gcc,-MF
- depmode=gcc
+ # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
+ gccflag=-qmakedep=gcc,-MF
+ depmode=gcc
fi
case "$depmode" in
@@ -136,8 +190,7 @@ gcc3)
done
"$@"
stat=$?
- if test $stat -eq 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
@@ -163,15 +216,14 @@ gcc)
fi
"$@" -Wp,"$gccflag$tmpdepfile"
stat=$?
- if test $stat -eq 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
- alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
+ # The second -e expression handles DOS-style file names with drive
+ # letters.
sed -e 's/^[^:]*: / /' \
-e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
## This next piece of magic avoids the "deleted header file" problem.
@@ -180,15 +232,15 @@ gcc)
## typically no way to rebuild the header). We avoid this by adding
## dummy dependencies for each header file. Too bad gcc doesn't do
## this for us directly.
- tr ' ' "$nl" < "$tmpdepfile" |
## Some versions of gcc put a space before the ':'. On the theory
## that the space means something, we add a space to the output as
## well. hp depmode also adds that space, but also prefixes the VPATH
## to the object. Take care to not repeat it in the output.
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
- | sed -e 's/$/ :/' >> "$depfile"
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
@@ -206,8 +258,7 @@ sgi)
"$@" -MDupdate "$tmpdepfile"
fi
stat=$?
- if test $stat -eq 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
@@ -215,7 +266,6 @@ sgi)
if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
echo "$object : \\" > "$depfile"
-
# Clip off the initial element (the dependent). Don't try to be
# clever and replace this with sed code, as IRIX sed won't handle
# lines with more than a fixed number of characters (4096 in
@@ -223,19 +273,15 @@ sgi)
# the IRIX cc adds comments like '#:fec' to the end of the
# dependency line.
tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
- tr "$nl" ' ' >> "$depfile"
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
+ | tr "$nl" ' ' >> "$depfile"
echo >> "$depfile"
-
# The second pass generates a dummy entry for each header file.
tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
- >> "$depfile"
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+ >> "$depfile"
else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
+ make_dummy_depfile
fi
rm -f "$tmpdepfile"
;;
@@ -253,9 +299,8 @@ aix)
# current directory. Also, the AIX compiler puts '$object:' at the
# start of each line; $object doesn't have directory information.
# Version 6 uses the directory in both cases.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ set_dir_from "$object"
+ set_base_from "$object"
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.u
tmpdepfile2=$base.u
@@ -268,9 +313,7 @@ aix)
"$@" -M
fi
stat=$?
-
- if test $stat -eq 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
exit $stat
fi
@@ -279,65 +322,37 @@ aix)
do
test -f "$tmpdepfile" && break
done
- if test -f "$tmpdepfile"; then
- # Each line is of the form 'foo.o: dependent.h'.
- # Do two passes, one to just change these to
- # '$object: dependent.h' and one to simply 'dependent.h:'.
- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
+ aix_post_process_depfile
;;
-icc)
- # Intel's C compiler anf tcc (Tiny C Compiler) understand '-MD -MF file'.
- # However on
- # $CC -MD -MF foo.d -c -o sub/foo.o sub/foo.c
- # ICC 7.0 will fill foo.d with something like
- # foo.o: sub/foo.c
- # foo.o: sub/foo.h
- # which is wrong. We want
- # sub/foo.o: sub/foo.c
- # sub/foo.o: sub/foo.h
- # sub/foo.c:
- # sub/foo.h:
- # ICC 7.1 will output
- # foo.o: sub/foo.c sub/foo.h
- # and will wrap long lines using '\':
- # foo.o: sub/foo.c ... \
- # sub/foo.h ... \
- # ...
- # tcc 0.9.26 (FIXME still under development at the moment of writing)
- # will emit a similar output, but also prepend the continuation lines
- # with horizontal tabulation characters.
+tcc)
+ # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
+ # FIXME: That version still under development at the moment of writing.
+ # Make that this statement remains true also for stable, released
+ # versions.
+ # It will wrap lines (doesn't matter whether long or short) with a
+ # trailing '\', as in:
+ #
+ # foo.o : \
+ # foo.c \
+ # foo.h \
+ #
+ # It will put a trailing '\' even on the last line, and will use leading
+ # spaces rather than leading tabs (at least since its commit 0394caf7
+ # "Emit spaces for -MD").
"$@" -MD -MF "$tmpdepfile"
stat=$?
- if test $stat -eq 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
- # Each line is of the form 'foo.o: dependent.h',
- # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'.
- # Do two passes, one to just change these to
- # '$object: dependent.h' and one to simply 'dependent.h:'.
- sed -e "s/^[ $tab][ $tab]*/ /" -e "s,^[^:]*:,$object :," \
- < "$tmpdepfile" > "$depfile"
- sed '
- s/[ '"$tab"'][ '"$tab"']*/ /g
- s/^ *//
- s/ *\\*$//
- s/^[^:]*: *//
- /^$/d
- /:$/d
- s/$/ :/
- ' < "$tmpdepfile" >> "$depfile"
+ # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
+ # We have to change lines of the first kind to '$object: \'.
+ sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
+ # And for each line of the second kind, we have to emit a 'dep.h:'
+ # dummy dependency, to avoid the deleted-header problem.
+ sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
rm -f "$tmpdepfile"
;;
@@ -356,34 +371,37 @@ pgcc)
# foo.o: sub/foo.c ... \
# sub/foo.h ... \
# ...
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
+ set_dir_from "$object"
# Use the source, not the object, to determine the base name, since
# that's sadly what pgcc will do too.
- base=`echo "$source" | sed -e 's|^.*/||' -e 's/\.[-_a-zA-Z0-9]*$//'`
- tmpdepfile="$base.d"
+ set_base_from "$source"
+ tmpdepfile=$base.d
# For projects that build the same source file twice into different object
# files, the pgcc approach of using the *source* file root name can cause
# problems in parallel builds. Use a locking strategy to avoid stomping on
# the same $tmpdepfile.
- lockdir="$base.d-lock"
- trap "echo '$0: caught signal, cleaning up...' >&2; rm -rf $lockdir" 1 2 13 15
+ lockdir=$base.d-lock
+ trap "
+ echo '$0: caught signal, cleaning up...' >&2
+ rmdir '$lockdir'
+ exit 1
+ " 1 2 13 15
numtries=100
i=$numtries
- while test $i -gt 0 ; do
+ while test $i -gt 0; do
# mkdir is a portable test-and-set.
- if mkdir $lockdir 2>/dev/null; then
+ if mkdir "$lockdir" 2>/dev/null; then
# This process acquired the lock.
"$@" -MD
stat=$?
# Release the lock.
- rm -rf $lockdir
+ rmdir "$lockdir"
break
else
- ## the lock is being held by a different process,
- ## wait until the winning process is done or we timeout
- while test -d $lockdir && test $i -gt 0; do
+ # If the lock is being held by a different process, wait
+ # until the winning process is done or we timeout.
+ while test -d "$lockdir" && test $i -gt 0; do
sleep 1
i=`expr $i - 1`
done
@@ -409,8 +427,8 @@ pgcc)
sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
# Some versions of the HPUX 10.20 sed can't process this invocation
# correctly. Breaking it into two sed invocations is a workaround.
- sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" |
- sed -e 's/$/ :/' >> "$depfile"
+ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
+ | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
@@ -421,9 +439,8 @@ hp2)
# 'foo.d', which lands next to the object file, wherever that
# happens to be.
# Much of this is similar to the tru64 case; see comments there.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ set_dir_from "$object"
+ set_base_from "$object"
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir.libs/$base.d
@@ -434,8 +451,7 @@ hp2)
"$@" +Maked
fi
stat=$?
- if test $stat -eq 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile1" "$tmpdepfile2"
exit $stat
fi
@@ -445,76 +461,61 @@ hp2)
test -f "$tmpdepfile" && break
done
if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+ sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
# Add 'dependent.h:' lines.
sed -ne '2,${
- s/^ *//
- s/ \\*$//
- s/$/:/
- p
- }' "$tmpdepfile" >> "$depfile"
+ s/^ *//
+ s/ \\*$//
+ s/$/:/
+ p
+ }' "$tmpdepfile" >> "$depfile"
else
- echo "#dummy" > "$depfile"
+ make_dummy_depfile
fi
rm -f "$tmpdepfile" "$tmpdepfile2"
;;
tru64)
- # The Tru64 compiler uses -MD to generate dependencies as a side
- # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
- # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
- # dependencies in 'foo.d' instead, so we check for that too.
- # Subdirectories are respected.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
- if test "$libtool" = yes; then
- # With Tru64 cc, shared objects can also be used to make a
- # static library. This mechanism is used in libtool 1.4 series to
- # handle both shared and static libraries in a single compilation.
- # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
- #
- # With libtool 1.5 this exception was removed, and libtool now
- # generates 2 separate objects for the 2 libraries. These two
- # compilations output dependencies in $dir.libs/$base.o.d and
- # in $dir$base.o.d. We have to check for both files, because
- # one of the two compilations can be disabled. We should prefer
- # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
- # automatically cleaned when .libs/ is deleted, while ignoring
- # the former would cause a distcleancheck panic.
- tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
- tmpdepfile2=$dir$base.o.d # libtool 1.5
- tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
- tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
- "$@" -Wc,-MD
- else
- tmpdepfile1=$dir$base.o.d
- tmpdepfile2=$dir$base.d
- tmpdepfile3=$dir$base.d
- tmpdepfile4=$dir$base.d
- "$@" -MD
- fi
-
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
- do
- test -f "$tmpdepfile" && break
- done
- if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
- else
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
+ # The Tru64 compiler uses -MD to generate dependencies as a side
+ # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # dependencies in 'foo.d' instead, so we check for that too.
+ # Subdirectories are respected.
+ set_dir_from "$object"
+ set_base_from "$object"
+
+ if test "$libtool" = yes; then
+ # Libtool generates 2 separate objects for the 2 libraries. These
+ # two compilations output dependencies in $dir.libs/$base.o.d and
+ # in $dir$base.o.d. We have to check for both files, because
+ # one of the two compilations can be disabled. We should prefer
+ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+ # automatically cleaned when .libs/ is deleted, while ignoring
+ # the former would cause a distcleancheck panic.
+ tmpdepfile1=$dir$base.o.d # libtool 1.5
+ tmpdepfile2=$dir.libs/$base.o.d # Likewise.
+ tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504
+ "$@" -Wc,-MD
+ else
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir$base.d
+ tmpdepfile3=$dir$base.d
+ "$@" -MD
+ fi
+
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ # Same post-processing that is required for AIX mode.
+ aix_post_process_depfile
+ ;;
msvc7)
if test "$libtool" = yes; then
@@ -525,8 +526,7 @@ msvc7)
"$@" $showIncludes > "$tmpdepfile"
stat=$?
grep -v '^Note: including file: ' "$tmpdepfile"
- if test "$stat" = 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
@@ -603,13 +603,14 @@ dashmstdout)
# in the target name. This is to cope with DOS-style filenames:
# a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
"$@" $dashmflag |
- sed 's:^['"$tab"' ]*[^:'"$tab"' ][^:][^:]*\:['"$tab"' ]*:'"$object"'\: :' > "$tmpdepfile"
+ sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
- tr ' ' "$nl" < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process this sed invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
@@ -662,10 +663,12 @@ makedepend)
# makedepend may prepend the VPATH from the source file name to the object.
# No need to regex-escape $object, excess matching of '.' is harmless.
sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
- sed '1,2d' "$tmpdepfile" | tr ' ' "$nl" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process the last invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ sed '1,2d' "$tmpdepfile" \
+ | tr ' ' "$nl" \
+ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile" "$tmpdepfile".bak
;;
@@ -701,10 +704,10 @@ cpp)
esac
done
- "$@" -E |
- sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
- -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
- sed '$ s: \\$::' > "$tmpdepfile"
+ "$@" -E \
+ | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ | sed '$ s: \\$::' > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
cat < "$tmpdepfile" >> "$depfile"
@@ -736,15 +739,15 @@ msvisualcpp)
shift
;;
"-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
- set fnord "$@"
- shift
- shift
- ;;
+ set fnord "$@"
+ shift
+ shift
+ ;;
*)
- set fnord "$@" "$arg"
- shift
- shift
- ;;
+ set fnord "$@" "$arg"
+ shift
+ shift
+ ;;
esac
done
"$@" -E 2>/dev/null |
diff --git a/Build/source/libs/cairo/cairo-1.12.8/build/depcomp b/Build/source/libs/cairo/cairo-1.12.8/build/depcomp
index 25a39e6cd5c..3f02f5d0086 100755
--- a/Build/source/libs/cairo/cairo-1.12.8/build/depcomp
+++ b/Build/source/libs/cairo/cairo-1.12.8/build/depcomp
@@ -1,10 +1,9 @@
#! /bin/sh
# depcomp - compile a program generating dependencies as side-effects
-scriptversion=2012-03-27.16; # UTC
+scriptversion=2012-10-18.11; # UTC
-# Copyright (C) 1999, 2000, 2003, 2004, 2005, 2006, 2007, 2009, 2010,
-# 2011, 2012 Free Software Foundation, Inc.
+# Copyright (C) 1999-2012 Free Software Foundation, Inc.
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
@@ -28,9 +27,9 @@ scriptversion=2012-03-27.16; # UTC
case $1 in
'')
- echo "$0: No command. Try '$0 --help' for more information." 1>&2
- exit 1;
- ;;
+ echo "$0: No command. Try '$0 --help' for more information." 1>&2
+ exit 1;
+ ;;
-h | --h*)
cat <<\EOF
Usage: depcomp [--help] [--version] PROGRAM [ARGS]
@@ -57,11 +56,65 @@ EOF
;;
esac
+# Get the directory component of the given path, and save it in the
+# global variables '$dir'. Note that this directory component will
+# be either empty or ending with a '/' character. This is deliberate.
+set_dir_from ()
+{
+ case $1 in
+ */*) dir=`echo "$1" | sed -e 's|/[^/]*$|/|'`;;
+ *) dir=;;
+ esac
+}
+
+# Get the suffix-stripped basename of the given path, and save it the
+# global variable '$base'.
+set_base_from ()
+{
+ base=`echo "$1" | sed -e 's|^.*/||' -e 's/\.[^.]*$//'`
+}
+
+# If no dependency file was actually created by the compiler invocation,
+# we still have to create a dummy depfile, to avoid errors with the
+# Makefile "include basename.Plo" scheme.
+make_dummy_depfile ()
+{
+ echo "#dummy" > "$depfile"
+}
+
+# Factor out some common post-processing of the generated depfile.
+# Requires the auxiliary global variable '$tmpdepfile' to be set.
+aix_post_process_depfile ()
+{
+ # If the compiler actually managed to produce a dependency file,
+ # post-process it.
+ if test -f "$tmpdepfile"; then
+ # Each line is of the form 'foo.o: dependency.h'.
+ # Do two passes, one to just change these to
+ # $object: dependency.h
+ # and one to simply output
+ # dependency.h:
+ # which is needed to avoid the deleted-header problem.
+ { sed -e "s,^.*\.[$lower]*:,$object:," < "$tmpdepfile"
+ sed -e "s,^.*\.[$lower]*:[$tab ]*,," -e 's,$,:,' < "$tmpdepfile"
+ } > "$depfile"
+ rm -f "$tmpdepfile"
+ else
+ make_dummy_depfile
+ fi
+}
+
# A tabulation character.
tab=' '
# A newline character.
nl='
'
+# Character ranges might be problematic outside the C locale.
+# These definitions help.
+upper=ABCDEFGHIJKLMNOPQRSTUVWXYZ
+lower=abcdefghijklmnopqrstuvwxyz
+digits=0123456789
+alpha=${upper}${lower}
if test -z "$depmode" || test -z "$source" || test -z "$object"; then
echo "depcomp: Variables source, object and depmode must be set" 1>&2
@@ -75,6 +128,9 @@ tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
rm -f "$tmpdepfile"
+# Avoid interferences from the environment.
+gccflag= dashmflag=
+
# Some modes work just like other modes, but use different flags. We
# parameterize here, but still list the modes in the big case below,
# to make depend.m4 easier to write. Note that we *cannot* use a case
@@ -86,32 +142,32 @@ if test "$depmode" = hp; then
fi
if test "$depmode" = dashXmstdout; then
- # This is just like dashmstdout with a different argument.
- dashmflag=-xM
- depmode=dashmstdout
+ # This is just like dashmstdout with a different argument.
+ dashmflag=-xM
+ depmode=dashmstdout
fi
cygpath_u="cygpath -u -f -"
if test "$depmode" = msvcmsys; then
- # This is just like msvisualcpp but w/o cygpath translation.
- # Just convert the backslash-escaped backslashes to single forward
- # slashes to satisfy depend.m4
- cygpath_u='sed s,\\\\,/,g'
- depmode=msvisualcpp
+ # This is just like msvisualcpp but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u='sed s,\\\\,/,g'
+ depmode=msvisualcpp
fi
if test "$depmode" = msvc7msys; then
- # This is just like msvc7 but w/o cygpath translation.
- # Just convert the backslash-escaped backslashes to single forward
- # slashes to satisfy depend.m4
- cygpath_u='sed s,\\\\,/,g'
- depmode=msvc7
+ # This is just like msvc7 but w/o cygpath translation.
+ # Just convert the backslash-escaped backslashes to single forward
+ # slashes to satisfy depend.m4
+ cygpath_u='sed s,\\\\,/,g'
+ depmode=msvc7
fi
if test "$depmode" = xlc; then
- # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency informations.
- gccflag=-qmakedep=gcc,-MF
- depmode=gcc
+ # IBM C/C++ Compilers xlc/xlC can output gcc-like dependency information.
+ gccflag=-qmakedep=gcc,-MF
+ depmode=gcc
fi
case "$depmode" in
@@ -134,8 +190,7 @@ gcc3)
done
"$@"
stat=$?
- if test $stat -eq 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
@@ -143,13 +198,17 @@ gcc3)
;;
gcc)
+## Note that this doesn't just cater to obsosete pre-3.x GCC compilers.
+## but also to in-use compilers like IMB xlc/xlC and the HP C compiler.
+## (see the conditional assignment to $gccflag above).
## There are various ways to get dependency output from gcc. Here's
## why we pick this rather obscure method:
## - Don't want to use -MD because we'd like the dependencies to end
## up in a subdir. Having to rename by hand is ugly.
## (We might end up doing this anyway to support other compilers.)
## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-## -MM, not -M (despite what the docs say).
+## -MM, not -M (despite what the docs say). Also, it might not be
+## supported by the other compilers which use the 'gcc' depmode.
## - Using -M directly means running the compiler twice (even worse
## than renaming).
if test -z "$gccflag"; then
@@ -157,15 +216,14 @@ gcc)
fi
"$@" -Wp,"$gccflag$tmpdepfile"
stat=$?
- if test $stat -eq 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
echo "$object : \\" > "$depfile"
- alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
+ # The second -e expression handles DOS-style file names with drive
+ # letters.
sed -e 's/^[^:]*: / /' \
-e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
## This next piece of magic avoids the "deleted header file" problem.
@@ -174,15 +232,15 @@ gcc)
## typically no way to rebuild the header). We avoid this by adding
## dummy dependencies for each header file. Too bad gcc doesn't do
## this for us directly.
- tr ' ' "$nl" < "$tmpdepfile" |
## Some versions of gcc put a space before the ':'. On the theory
## that the space means something, we add a space to the output as
## well. hp depmode also adds that space, but also prefixes the VPATH
## to the object. Take care to not repeat it in the output.
## Some versions of the HPUX 10.20 sed can't process this invocation
## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
- | sed -e 's/$/ :/' >> "$depfile"
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^\\$//' -e '/^$/d' -e "s|.*$object$||" -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
@@ -200,8 +258,7 @@ sgi)
"$@" -MDupdate "$tmpdepfile"
fi
stat=$?
- if test $stat -eq 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
@@ -209,7 +266,6 @@ sgi)
if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files
echo "$object : \\" > "$depfile"
-
# Clip off the initial element (the dependent). Don't try to be
# clever and replace this with sed code, as IRIX sed won't handle
# lines with more than a fixed number of characters (4096 in
@@ -217,19 +273,15 @@ sgi)
# the IRIX cc adds comments like '#:fec' to the end of the
# dependency line.
tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
- tr "$nl" ' ' >> "$depfile"
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' \
+ | tr "$nl" ' ' >> "$depfile"
echo >> "$depfile"
-
# The second pass generates a dummy entry for each header file.
tr ' ' "$nl" < "$tmpdepfile" \
- | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
- >> "$depfile"
+ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
+ >> "$depfile"
else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
+ make_dummy_depfile
fi
rm -f "$tmpdepfile"
;;
@@ -247,9 +299,8 @@ aix)
# current directory. Also, the AIX compiler puts '$object:' at the
# start of each line; $object doesn't have directory information.
# Version 6 uses the directory in both cases.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ set_dir_from "$object"
+ set_base_from "$object"
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.u
tmpdepfile2=$base.u
@@ -262,9 +313,7 @@ aix)
"$@" -M
fi
stat=$?
-
- if test $stat -eq 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
exit $stat
fi
@@ -273,65 +322,113 @@ aix)
do
test -f "$tmpdepfile" && break
done
- if test -f "$tmpdepfile"; then
- # Each line is of the form 'foo.o: dependent.h'.
- # Do two passes, one to just change these to
- # '$object: dependent.h' and one to simply 'dependent.h:'.
- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
- else
- # The sourcefile does not contain any dependencies, so just
- # store a dummy comment line, to avoid errors with the Makefile
- # "include basename.Plo" scheme.
- echo "#dummy" > "$depfile"
+ aix_post_process_depfile
+ ;;
+
+tcc)
+ # tcc (Tiny C Compiler) understand '-MD -MF file' since version 0.9.26
+ # FIXME: That version still under development at the moment of writing.
+ # Make that this statement remains true also for stable, released
+ # versions.
+ # It will wrap lines (doesn't matter whether long or short) with a
+ # trailing '\', as in:
+ #
+ # foo.o : \
+ # foo.c \
+ # foo.h \
+ #
+ # It will put a trailing '\' even on the last line, and will use leading
+ # spaces rather than leading tabs (at least since its commit 0394caf7
+ # "Emit spaces for -MD").
+ "$@" -MD -MF "$tmpdepfile"
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile"
+ exit $stat
fi
+ rm -f "$depfile"
+ # Each non-empty line is of the form 'foo.o : \' or ' dep.h \'.
+ # We have to change lines of the first kind to '$object: \'.
+ sed -e "s|.*:|$object :|" < "$tmpdepfile" > "$depfile"
+ # And for each line of the second kind, we have to emit a 'dep.h:'
+ # dummy dependency, to avoid the deleted-header problem.
+ sed -n -e 's|^ *\(.*\) *\\$|\1:|p' < "$tmpdepfile" >> "$depfile"
rm -f "$tmpdepfile"
;;
-icc)
- # Intel's C compiler anf tcc (Tiny C Compiler) understand '-MD -MF file'.
- # However on
- # $CC -MD -MF foo.d -c -o sub/foo.o sub/foo.c
- # ICC 7.0 will fill foo.d with something like
- # foo.o: sub/foo.c
- # foo.o: sub/foo.h
- # which is wrong. We want
- # sub/foo.o: sub/foo.c
- # sub/foo.o: sub/foo.h
- # sub/foo.c:
- # sub/foo.h:
- # ICC 7.1 will output
+## The order of this option in the case statement is important, since the
+## shell code in configure will try each of these formats in the order
+## listed in this file. A plain '-MD' option would be understood by many
+## compilers, so we must ensure this comes after the gcc and icc options.
+pgcc)
+ # Portland's C compiler understands '-MD'.
+ # Will always output deps to 'file.d' where file is the root name of the
+ # source file under compilation, even if file resides in a subdirectory.
+ # The object file name does not affect the name of the '.d' file.
+ # pgcc 10.2 will output
# foo.o: sub/foo.c sub/foo.h
- # and will wrap long lines using '\':
+ # and will wrap long lines using '\' :
# foo.o: sub/foo.c ... \
# sub/foo.h ... \
# ...
- # tcc 0.9.26 (FIXME still under development at the moment of writing)
- # will emit a similar output, but also prepend the continuation lines
- # with horizontal tabulation characters.
- "$@" -MD -MF "$tmpdepfile"
- stat=$?
- if test $stat -eq 0; then :
- else
+ set_dir_from "$object"
+ # Use the source, not the object, to determine the base name, since
+ # that's sadly what pgcc will do too.
+ set_base_from "$source"
+ tmpdepfile=$base.d
+
+ # For projects that build the same source file twice into different object
+ # files, the pgcc approach of using the *source* file root name can cause
+ # problems in parallel builds. Use a locking strategy to avoid stomping on
+ # the same $tmpdepfile.
+ lockdir=$base.d-lock
+ trap "
+ echo '$0: caught signal, cleaning up...' >&2
+ rmdir '$lockdir'
+ exit 1
+ " 1 2 13 15
+ numtries=100
+ i=$numtries
+ while test $i -gt 0; do
+ # mkdir is a portable test-and-set.
+ if mkdir "$lockdir" 2>/dev/null; then
+ # This process acquired the lock.
+ "$@" -MD
+ stat=$?
+ # Release the lock.
+ rmdir "$lockdir"
+ break
+ else
+ # If the lock is being held by a different process, wait
+ # until the winning process is done or we timeout.
+ while test -d "$lockdir" && test $i -gt 0; do
+ sleep 1
+ i=`expr $i - 1`
+ done
+ fi
+ i=`expr $i - 1`
+ done
+ trap - 1 2 13 15
+ if test $i -le 0; then
+ echo "$0: failed to acquire lock after $numtries attempts" >&2
+ echo "$0: check lockdir '$lockdir'" >&2
+ exit 1
+ fi
+
+ if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
rm -f "$depfile"
- # Each line is of the form 'foo.o: dependent.h',
- # or 'foo.o: dep1.h dep2.h \', or ' dep3.h dep4.h \'.
+ # Each line is of the form `foo.o: dependent.h',
+ # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'.
# Do two passes, one to just change these to
- # '$object: dependent.h' and one to simply 'dependent.h:'.
- sed -e "s/^[ $tab][ $tab]*/ /" -e "s,^[^:]*:,$object :," \
- < "$tmpdepfile" > "$depfile"
- sed '
- s/[ '"$tab"'][ '"$tab"']*/ /g
- s/^ *//
- s/ *\\*$//
- s/^[^:]*: *//
- /^$/d
- /:$/d
- s/$/ :/
- ' < "$tmpdepfile" >> "$depfile"
+ # `$object: dependent.h' and one to simply `dependent.h:'.
+ sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process this invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" \
+ | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
@@ -342,9 +439,8 @@ hp2)
# 'foo.d', which lands next to the object file, wherever that
# happens to be.
# Much of this is similar to the tru64 case; see comments there.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
+ set_dir_from "$object"
+ set_base_from "$object"
if test "$libtool" = yes; then
tmpdepfile1=$dir$base.d
tmpdepfile2=$dir.libs/$base.d
@@ -355,8 +451,7 @@ hp2)
"$@" +Maked
fi
stat=$?
- if test $stat -eq 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile1" "$tmpdepfile2"
exit $stat
fi
@@ -366,76 +461,61 @@ hp2)
test -f "$tmpdepfile" && break
done
if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," "$tmpdepfile" > "$depfile"
+ sed -e "s,^.*\.[$lower]*:,$object:," "$tmpdepfile" > "$depfile"
# Add 'dependent.h:' lines.
sed -ne '2,${
- s/^ *//
- s/ \\*$//
- s/$/:/
- p
- }' "$tmpdepfile" >> "$depfile"
+ s/^ *//
+ s/ \\*$//
+ s/$/:/
+ p
+ }' "$tmpdepfile" >> "$depfile"
else
- echo "#dummy" > "$depfile"
+ make_dummy_depfile
fi
rm -f "$tmpdepfile" "$tmpdepfile2"
;;
tru64)
- # The Tru64 compiler uses -MD to generate dependencies as a side
- # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
- # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
- # dependencies in 'foo.d' instead, so we check for that too.
- # Subdirectories are respected.
- dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
- test "x$dir" = "x$object" && dir=
- base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
- if test "$libtool" = yes; then
- # With Tru64 cc, shared objects can also be used to make a
- # static library. This mechanism is used in libtool 1.4 series to
- # handle both shared and static libraries in a single compilation.
- # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d.
- #
- # With libtool 1.5 this exception was removed, and libtool now
- # generates 2 separate objects for the 2 libraries. These two
- # compilations output dependencies in $dir.libs/$base.o.d and
- # in $dir$base.o.d. We have to check for both files, because
- # one of the two compilations can be disabled. We should prefer
- # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
- # automatically cleaned when .libs/ is deleted, while ignoring
- # the former would cause a distcleancheck panic.
- tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4
- tmpdepfile2=$dir$base.o.d # libtool 1.5
- tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5
- tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504
- "$@" -Wc,-MD
- else
- tmpdepfile1=$dir$base.o.d
- tmpdepfile2=$dir$base.d
- tmpdepfile3=$dir$base.d
- tmpdepfile4=$dir$base.d
- "$@" -MD
- fi
-
- stat=$?
- if test $stat -eq 0; then :
- else
- rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
- exit $stat
- fi
-
- for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4"
- do
- test -f "$tmpdepfile" && break
- done
- if test -f "$tmpdepfile"; then
- sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
- sed -e 's,^.*\.[a-z]*:['"$tab"' ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
- else
- echo "#dummy" > "$depfile"
- fi
- rm -f "$tmpdepfile"
- ;;
+ # The Tru64 compiler uses -MD to generate dependencies as a side
+ # effect. 'cc -MD -o foo.o ...' puts the dependencies into 'foo.o.d'.
+ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
+ # dependencies in 'foo.d' instead, so we check for that too.
+ # Subdirectories are respected.
+ set_dir_from "$object"
+ set_base_from "$object"
+
+ if test "$libtool" = yes; then
+ # Libtool generates 2 separate objects for the 2 libraries. These
+ # two compilations output dependencies in $dir.libs/$base.o.d and
+ # in $dir$base.o.d. We have to check for both files, because
+ # one of the two compilations can be disabled. We should prefer
+ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is
+ # automatically cleaned when .libs/ is deleted, while ignoring
+ # the former would cause a distcleancheck panic.
+ tmpdepfile1=$dir$base.o.d # libtool 1.5
+ tmpdepfile2=$dir.libs/$base.o.d # Likewise.
+ tmpdepfile3=$dir.libs/$base.d # Compaq CCC V6.2-504
+ "$@" -Wc,-MD
+ else
+ tmpdepfile1=$dir$base.d
+ tmpdepfile2=$dir$base.d
+ tmpdepfile3=$dir$base.d
+ "$@" -MD
+ fi
+
+ stat=$?
+ if test $stat -ne 0; then
+ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ exit $stat
+ fi
+
+ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3"
+ do
+ test -f "$tmpdepfile" && break
+ done
+ # Same post-processing that is required for AIX mode.
+ aix_post_process_depfile
+ ;;
msvc7)
if test "$libtool" = yes; then
@@ -446,8 +526,7 @@ msvc7)
"$@" $showIncludes > "$tmpdepfile"
stat=$?
grep -v '^Note: including file: ' "$tmpdepfile"
- if test "$stat" = 0; then :
- else
+ if test $stat -ne 0; then
rm -f "$tmpdepfile"
exit $stat
fi
@@ -524,13 +603,14 @@ dashmstdout)
# in the target name. This is to cope with DOS-style filenames:
# a dependency such as 'c:/foo/bar' could be seen as target 'c' otherwise.
"$@" $dashmflag |
- sed 's:^['"$tab"' ]*[^:'"$tab"' ][^:][^:]*\:['"$tab"' ]*:'"$object"'\: :' > "$tmpdepfile"
+ sed "s|^[$tab ]*[^:$tab ][^:][^:]*:[$tab ]*|$object: |" > "$tmpdepfile"
rm -f "$depfile"
cat < "$tmpdepfile" > "$depfile"
- tr ' ' "$nl" < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process this sed invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ tr ' ' "$nl" < "$tmpdepfile" \
+ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile"
;;
@@ -583,10 +663,12 @@ makedepend)
# makedepend may prepend the VPATH from the source file name to the object.
# No need to regex-escape $object, excess matching of '.' is harmless.
sed "s|^.*\($object *:\)|\1|" "$tmpdepfile" > "$depfile"
- sed '1,2d' "$tmpdepfile" | tr ' ' "$nl" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly. Breaking it into two sed invocations is a workaround.
- sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
+ # Some versions of the HPUX 10.20 sed can't process the last invocation
+ # correctly. Breaking it into two sed invocations is a workaround.
+ sed '1,2d' "$tmpdepfile" \
+ | tr ' ' "$nl" \
+ | sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' \
+ | sed -e 's/$/ :/' >> "$depfile"
rm -f "$tmpdepfile" "$tmpdepfile".bak
;;
@@ -622,10 +704,10 @@ cpp)
esac
done
- "$@" -E |
- sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
- -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
- sed '$ s: \\$::' > "$tmpdepfile"
+ "$@" -E \
+ | sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \
+ | sed '$ s: \\$::' > "$tmpdepfile"
rm -f "$depfile"
echo "$object : \\" > "$depfile"
cat < "$tmpdepfile" >> "$depfile"
@@ -657,15 +739,15 @@ msvisualcpp)
shift
;;
"-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
- set fnord "$@"
- shift
- shift
- ;;
+ set fnord "$@"
+ shift
+ shift
+ ;;
*)
- set fnord "$@" "$arg"
- shift
- shift
- ;;
+ set fnord "$@" "$arg"
+ shift
+ shift
+ ;;
esac
done
"$@" -E 2>/dev/null |
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 07:50:50 +0000