summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Master/texmf-dist/doc/latex/fancyhdr/README49
-rw-r--r--Master/texmf-dist/doc/latex/fancyhdr/fancyhdr.pdfbin312991 -> 378142 bytes
-rw-r--r--Master/texmf-dist/doc/latex/fancyhdr/fancyhdr.tex285
-rw-r--r--Master/texmf-dist/tex/latex/fancyhdr/extramarks.sty14
-rw-r--r--Master/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty56
5 files changed, 198 insertions, 206 deletions
diff --git a/Master/texmf-dist/doc/latex/fancyhdr/README b/Master/texmf-dist/doc/latex/fancyhdr/README
index f0371cf8943..8ce4276df34 100644
--- a/Master/texmf-dist/doc/latex/fancyhdr/README
+++ b/Master/texmf-dist/doc/latex/fancyhdr/README
@@ -1,31 +1,32 @@
-This is fancyhdr, a replacement for fancyheadings.
+fancyhdr – Extensive control of page headers and footers in LaTeX2ε
-I still still intend to make sometime in the future a real .dtx of it,
-including the minimal documentation. The current documentation is in
-fancyhdr.tex, but this contains much more material than the fancyhdr doc.
-When the fancyhdr.dtx is ready, I will rename fancyhdr.tex into something
-like pagelayout.tex to get it more in line with the title (Page Layout in
-LaTeX).
+The package provides extensive facilities, both for constructing headers and footers, and for controlling their use (for example, at times when LaTeX would automatically change the heading style in use).
-fancyhdr is 99% compatible with fancyheadings. The only incompatibility is
-that \headrulewidth and \footrulewidth and their \plain... versions are no
-longer length parameters, but normal macros (to be changed with
-\renewcommand rather than \setlength).
+The package consists of the following files:
-Although all the other old fancyheadings commands continue to work you are
-advised to use the new syntax as described in fancyhdr.tex, because this is
-much easier to use in complicated cases. The old way of doing is no longer
-described in the manual, except for the simplest use of \lhead etc.
+README This file
+fancyhdr.sty the LaTeX package
+fancyhdr.tex extensive documentation file
+fancyhdr.pdf PDF of the above
+fancyheadings.sty this loads fancyhdr with a warning message
+extramarks.sty a package for additional marks
-In order to latex the documentation you need to install a copy of
-tex-archive/macros/latex/contrib/other/misc/boxedminipage.sty
+Fancyhdr is a replacement for the old LaTeX2 package fancyheadings. That
+one should not be used anymore. The package fancyheadings included here
+just loads fancyhdr with a warning message.
-The fixmarks.sty is now obsolete, as it is superseded by David Carlisle's
-fix2col.sty (tex-archive/macros/latex/contrib/supported/carlisle/) so it is
-no longer included here.
+The documentation (fancyhdr.tex/fancyhdr.pdf) describes both
+fancyhdr.sty and extramarks.sty.
+In order to latex the documentation you need to have a copy of
+boxedminipage.sty (CTAN:/macros/latex/contrib/boxedminipage) installed.
-fancyhdr.sty version 3 and extramarks.sty version 2 are the packages
-as described in the second edition of The LaTeX Companion.
+There used to be a package fixmarks.sty, but that is obsolete. It fixed
+a problem in LaTeX, but that is now solved in the LaTeX2ε system itself.
+So it is no longer included.
+
+fancyhdr.sty version 3 and extramarks.sty version 2 are the packages as
+described in the second edition of The LaTeX Companion. But that
+documentation should also suffice for the newer versions.
LICENCE: All files in this package may be distributed under the terms of
the LaTeX Project Public License, as described in lppl.txt in the base
@@ -33,7 +34,7 @@ LaTeX distribution. Either version 1 or, at your option, any later
version.
--
Piet van Oostrum.
-<piet@cs.ruu.nl>
-http://www.cs.ruu.nl/~piet
+<piet@vanoostrum.org>
+http://www.pietvanoostrum.com/
diff --git a/Master/texmf-dist/doc/latex/fancyhdr/fancyhdr.pdf b/Master/texmf-dist/doc/latex/fancyhdr/fancyhdr.pdf
index 0d9a94b2a0c..49b2aef326c 100644
--- a/Master/texmf-dist/doc/latex/fancyhdr/fancyhdr.pdf
+++ b/Master/texmf-dist/doc/latex/fancyhdr/fancyhdr.pdf
Binary files differ
diff --git a/Master/texmf-dist/doc/latex/fancyhdr/fancyhdr.tex b/Master/texmf-dist/doc/latex/fancyhdr/fancyhdr.tex
index 3ac345cf493..910136ece15 100644
--- a/Master/texmf-dist/doc/latex/fancyhdr/fancyhdr.tex
+++ b/Master/texmf-dist/doc/latex/fancyhdr/fancyhdr.tex
@@ -6,18 +6,13 @@
\usepackage{array}
\usepackage{a4wide}
\usepackage{boxedminipage}
-%%\usepackage{fancyheadings}
-%%\pagestyle{fancy}
-%%\lhead{\rightmark}
-%%\rhead{\thepage}
-%%\cfoot{}
\makeindex
\title{Page layout in \LaTeX}
\author{Piet van Oostrum\thanks{A considerable part of this article was
written by George
Gr\"atzer (University of Manitoba) in \emph{Notices Amer. Math. Soc.}
Thanks, George!}\\
- Dept.\ of Computer Science\\
+ Dept.\ of Computer Science\thanks{This was my employer at the time I developed this package. I am now retired.}\\
Utrecht University}
\def\latex/{\protect\LaTeX{}}
\def\tex/{\TeX}
@@ -58,12 +53,9 @@
Originally this was the documentation of the \textsf{fancyheadings}
package. It did contain also other info, e.g. advanced use of marks.
It has now been upgraded to include more, e.g. the handling of floats.
- The fancyheadings documentation has been upgraded to conform to version 2
- of this package\footnote{this version is due to be released Real Soon Now}. For reasons of compatibility with certain operating systems, the
- name of the package has been changed to \textsf{fancyhdr}.
+ The documentation describes version 3.6 or later of the \textsf{fancyhdr} package
+ and version 2.1 or later of the \textsf{extramarks} package.
- Although this paper uses \LaTeXe{} commands, most of the techniques can
- be used with older \LaTeX versions with appropriate changes.
\end{abstract}
\tableofcontents
@@ -94,7 +86,7 @@ to accomplish things that cannot be done in another way. You should use
these packages to get the desired result rather than fiddling with the
output routine yourself.
-There a a number of things that you must be aware of:
+There are a number of things that you must be aware of:
\begin{enumerate}
\item The margins on the left are not called \Cmd{leftmargin}, but
\Cmd{evensidemargin} (on even-numbered pages) and \Cmd{oddsidemargin}
@@ -201,22 +193,6 @@ define:
Of course, you also have complete control over fonts, uppercase
and lowercase displays, etc.
-%%% \section{Where to get it?}\label{get}
-%%% You only need the file \verb|fancyhdr.sty| which you can find at the
-%%% \index{ftp}
-%%% CTAN sites: \verb|ftp.shsu.edu| (U.S.), \verb|ftp.tex.ac.uk| (U.K.), and
-%%% \verb|ftp.dante.de| (Germany).
-%%% You will find it in the directory\\
-%%% \verb|/tex-archive/macros/latex209/contrib/fancyhdr|. Although
-%%% \textsf{fancyhdr}
-%%% is a \latex/ 2.09 style file, it will work with \LaTeXe{}. Also this
-%%% \TTindex{fixmarks.sty}
-%%% \TTindex{extramarks.sty}
-%%% article and the two packages \texttt{fixmarks} and \texttt{extramarks} can
-%%% be found there. (The code for these packages given in this article is a
-%%% simplified version.)
-
-
\section{Simple use of \textsf{fancyhdr}} To use this package in a
\LaTeXe\ document, place the file \verb|fancyhdr.sty| in a
directory/folder where \tex/ can find it (normally in the input
@@ -226,9 +202,7 @@ after
\begin{verbatim}
\documentclass{...}
\end{verbatim}
-the commands\footnote{For LaTeX2.09 you should specify \texttt{[fancyhdr]}
- in the \Cmd{documentstyle} instead of the \Cmd{usepackage}
- command.}:
+the commands:
\PSindex{fancy}
\begin{verbatim}
@@ -261,8 +235,8 @@ A. Smith, on ``The performance of new graduates'' with the
following page layout:
\begin{fblock}
-\noindent\makebox[\textwidth]{\hfill\bfseries The performance of new
-graduates}
+\noindent\makebox[\textwidth]{\hfill\textbf{The performance of new
+graduates}}
\noindent\makebox[\textwidth]{\hrulefill}\\[\baselineskip]
\noindent\makebox[\textwidth]{\hfill page body\hfill}\\[\baselineskip]
\noindent\makebox[\textwidth]{\hrulefill}
@@ -287,7 +261,7 @@ This is accomplished by these commands following \Cmd{pagestyle\{fancy\}}
\begin{verbatim}
\lhead{}
\chead{}
-\rhead{\bfseries The performance of new graduates}
+\rhead{\textbf{The performance of new graduates}}
\lfoot{From: K. Grant}
\cfoot{To: Dean A. Smith}
\rfoot{\thepage}
@@ -295,7 +269,7 @@ This is accomplished by these commands following \Cmd{pagestyle\{fancy\}}
\renewcommand{\footrulewidth}{0.4pt}
\end{verbatim}
(The \Cmd{thepage} macro displays the current page number.
-\Cmd{bfseries} is the \LaTeXe's way of selecting bold face.)
+\Cmd{textbf} puts it in bold face.)
This is now fine, except that the first page does not need
all these headers and footers. To eliminate all but the
@@ -337,8 +311,8 @@ following for the even (left-side) pages:
\begin{fblock}
-\noindent\makebox[\textwidth]{\bfseries The performance of new
-graduates\hfill}
+\noindent\makebox[\textwidth]{\textbf{The performance of new
+graduates}\hfill}
\noindent\makebox[\textwidth]{\hrulefill}\\[\baselineskip]
\noindent\makebox[\textwidth]{\hfill page body\hfill}\\[\baselineskip]
\noindent\makebox[\textwidth]{\hrulefill}
@@ -352,7 +326,7 @@ Here are the commands:
\begin{verbatim}
\fancyhead{} % clear all header fields
-\fancyhead[RO,LE]{\bfseries The performance of new graduates}
+\fancyhead[RO,LE]{\textbf{The performance of new graduates}}
\fancyfoot{} % clear all footer fields
\fancyfoot[LE,RO]{\thepage}
\fancyfoot[LO,CE]{From: K. Grant}
@@ -437,7 +411,7 @@ making the page number bold.
\begin{verbatim}
\fancypagestyle{plain}{%
\fancyhf{} % clear all header and footer fields
-\fancyfoot[C]{\bfseries \thepage} % except the center
+\fancyfoot[C]{\textbf{\thepage}} % except the center
\renewcommand{\headrulewidth}{0pt}
\renewcommand{\footrulewidth}{0pt}}
\end{verbatim}
@@ -458,7 +432,7 @@ the footer; there is no header, and there are no decorative lines.
On an even page, we get the layout:
\begin{fblock}
-\noindent\makebox[\textwidth]{\sl 1.2 EVALUATION\hfill
+\noindent\makebox[\textwidth]{\textsl{1.2 EVALUATION}\hfill
CHAPTER 1. INTRODUCTION}
\noindent\makebox[\textwidth]{\hrulefill}\\[\baselineskip]
\noindent\makebox[\textwidth]{\hfill page body\hfill}\\[\baselineskip]
@@ -469,7 +443,7 @@ On an even page, we get the layout:
On an odd page, we get the layout:
\begin{fblock}
-\noindent\makebox[\textwidth]{\sl CHAPTER 1. INTRODUCTION\hfill
+\noindent\makebox[\textwidth]{\textsl{CHAPTER 1. INTRODUCTION}\hfill
1.2 EVALUATION}
\noindent\makebox[\textwidth]{\hrulefill}\\[\baselineskip]
\noindent\makebox[\textwidth]{\hfill page body\hfill}\\[\baselineskip]
@@ -484,8 +458,8 @@ This default layout is produced by the following commands:
\CmdIndex{rightmark}
\CmdIndex{leftmark}
\begin{verbatim}
-\fancyhead[LE,RO]{\slshape \rightmark}
-\fancyhead[LO,RE]{\slshape \leftmark}
+\fancyhead[LE,RO]{\textsl{\rightmark}}
+\fancyhead[LO,RE]{\textsl{\leftmark}}
\fancyfoot[C]{\thepage}
\end{verbatim}
@@ -749,11 +723,6 @@ Fortunately the \texttt{ifthen} package works well:
\fancyhead[LO,RE]{\thepage}
\end{verbatim}
-Dictionaries are often done with two columns. Unfortunately there is a bug
-in \latex/'s twocolumn option which causes some marks to be lost. If you
-use David Carlisle's fix2col.sty\TTindex{fix2col.sty} this will be solved.
-
-
\section{Fancy layouts}
\index{multi-line}
@@ -814,72 +783,50 @@ of the footer text line. By default it is set to 30\% of the normal line
distance. You may want to adjust it if you use unusally large or small
fonts in the footer. Change it with \Cmd{renewcommand}.
+\section{Two book examples}
+The following definitions give an approximation of the style
+used in L. Lamport's \latex/ book.
-\section{The width of the headers and footers}
-
+Lamport's header overhangs the outside margin. This is done as follows.
The width of headers and footers is \Cmd{headwidth}, which by default
equals the width of the text: \Cmd{textwidth}. You can make the width
\CmdIndex{headwidth}
-wider (or narrower) by using the commands
-\CmdIndex{fancyheadoffset}
-\CmdIndex{fancyfootoffset}
-\CmdIndex{fancyhfoffset}
-\Cmd{fancyheadoffset}, \Cmd{fancyfootoffset} and \Cmd{fancyhfoffset}%
-\footnote{These commands are defined since fancyhdr version 3.0. In older
- versions you just changed \Cmd{headwidth} with the
-\Cmd{setlength} and \Cmd{addtolength} commands. You are encouraged to use
- these newer offset commands instead. You certainly can't mix the two
- approaches.}.
-These are similar to \Cmd{fancyhead}, \Cmd{fancyfoot} and \Cmd{fancyhf}.
-The only difference is that the offsets don't accept the C option.
-
-Usage: \Cmd{fancyhfoffset[place]\{length\}}
-and similar for the others.
-
-It defines offsets to be applied to the header/footer to let it stick into
-the margins if length $>$ 0 and to be smaller if length $<$ 0.
-place is like in \Cmd{fancyhead}, except that only E,O,L,R (or the lowercase)
-can be used.
-
-With these commands \Cmd{headwidth} will be dynamically calculated in
-the headers/footers to be \Cmd{textwidth} + left offset + right offset, so
-that e.g. you can use the following to define a red line in the header
-and a blue line in the footer (please note that the width of the footer is
-also called \Cmd{headwidth} although it may differ from the width of the
-header):
+wider (or narrower) by redefining \Cmd{headwidth} with the
+\Cmd{setlength} and \Cmd{addtolength} commands.
+To overhang the outside margin where the marginal notes are
+\CmdIndex{marginparsep}
+\CmdIndex{marginparwidth}
+printed, add both \Cmd{marginparsep} and \Cmd{marginparwidth} to
+\Cmd{headwidth} with the commands:
\begin{verbatim}
-\renewcommand{\headrule}{{\color{red}%
- \hrule width\headwidth height\headrulewidth \vskip-\headrulewidth}}
-
-\setlength{\footrulewidth}{\headrulewidth}
-
-\renewcommand{\footrule}{{\color{blue}%
- \vskip-\footruleskip\vskip-\footrulewidth
-\hrule width\headwidth height\footrulewidth\vskip\footruleskip}}
+\addtolength{\headwidth}{\marginparsep}
+\addtolength{\headwidth}{\marginparwidth}
\end{verbatim}
-\section{Two book examples}
+\begin{flushleft}
+You must issue these commands \emph{after} the first
+\Cmd{pagestyle\{fancy\}} command as this
+will establish the default for \Cmd{headwidth}\footnote{In version 2 of
+ \textsf{fancyhdr} it is usually safe to do it before, but it is still
+ advised to do after.}.
+\end{flushleft}
-The following definitions give an approximation of the style
-used in Leslie Lamport's \latex/ book.
-
-Lamport's header overhangs the outside margin. This is done with the
-offset commands described in the previous section.
+And now a complete definition of Lamport's book style:
\begin{verbatim}
\documentclass{book}
\usepackage{fancyhdr}
\pagestyle{fancy}
-\usepackage{calc}
-\fancyheadoffset[LE,RO]{\marginparsep+\marginparwidth}
+\addtolength{\headwidth}{\marginparsep}
+\addtolength{\headwidth}{\marginparwidth}
\renewcommand{\chaptermark}[1]{\markboth{#1}{}}
\renewcommand{\sectionmark}[1]{\markright{\thesection\ #1}}
\fancyhf{}
-\fancyhead[LE,RO]{\bfseries\thepage}
-\fancyhead[LO]{\bfseries\rightmark}
-\fancyhead[RE]{\bfseries\leftmark}
+\fancyhead[LE,RO]{\textbf{\thepage}}
+\fancyhead[LO]{\textbf{\rightmark}}
+\fancyhead[RE]{\textbf{\leftmark}}
\fancypagestyle{plain}{%
\fancyhead{} % get rid of headers
\renewcommand{\headrulewidth}{0pt} % and the line
@@ -890,6 +837,20 @@ offset commands described in the previous section.
Notice that the \Cmd{chaptermark} and \Cmd{sectionmark} commands have
been redefined to eliminate the chapter numbers and the uppercaseness.
+For more control about the horizontal position of the headers and/or footers, \textsf{fancyhdr} has additional commands to specify the offset of the header and/or footer elements. Use \Cmd{fancyhfoffset[place]\{length\}}
+\CmdIndex{fancyhfoffset}
+to offset one or more elements. The \texttt{place} parameter is like the optional parameter of \Cmd{fancyhf}, like \texttt{L R E O}, except that \texttt{C} cannot be used. It specifies for which elements the offset should be applied. The \texttt{length} parameter specifies the actual offset. Positive values move the element outward (into the margin), negative values inward. There are also specialised commands \Cmd{fancyheadoffset} and \Cmd{fancyfootoffset}, which have the \texttt{H} and \texttt{F} parameter pre-applied, respectively.
+\CmdIndex{fancyheadoffset}
+\CmdIndex{fancyfootoffset}
+
+When you use these commands, \latex/ will recalculate \Cmd{headwidth}, based on the given parameters.
+
+So the above example could also have been done with (N.B. You can only use such an expression as a length parameter if the \textsf{calc} package is used):
+
+\begin{verbatim}
+\fancyheadoffset[LE,RO]{\marginparsep+\marginparwidth}
+\end{verbatim}
+
For the second example, we take the \amslatex/ book.% \cite{gG93B}.
% George Gratzer, Math into LaTeX, An Introduction to LaTeX and AMS-LaTeX,
% Birkhauser Boston, ISBN 0-8176-3805-9
@@ -1034,12 +995,7 @@ page then you must redefine the \Cmd{cleardoublepage} command.
\label{sec:nofm}
Some document writers prefer the pages to be numbered as \textsf{n} of
-\textsf{m} where \textsf{m} is the number of pages in the document. There
-\TTindex{nofm.sty}
-is a package \texttt{nofm.sty} available, but some versions of it are
-defective, and most don't work with fancyhdr because they take over the
-\TTindex{lastpage.sty}
-complete page layout. For \LaTeXe{} there is a package \texttt{lastpage}
+\textsf{m} where \textsf{m} is the number of pages in the document. There is a package \texttt{lastpage}
available which you can use with \textsf{fancyhdr} as follows:
\begin{verbatim}
@@ -1048,24 +1004,11 @@ available which you can use with \textsf{fancyhdr} as follows:
\cfoot{\thepage\ of \pageref{LastPage}}
\end{verbatim}
-If you are still using \latex/2.09 and you are not able to switch to
-\LaTeXe{} you can use the \latex/2.09 compatible \texttt{lastpage209.sty}.
-which is defined as
-follows:
-
-\begin{verbatim}
-\let\origenddocument=\enddocument
-\def\enddocument{\clearpage\if@filesw
- {\addtocounter{page}{-1} \immediate\write\@mainaux
- {\string\newlabel{LastPage}{{}{\thepage}}}}\origenddocument}
-\end{verbatim}
-
The value of the \texttt{LastPage} label can be used to
make different headers or footers on the last page of a document. E.g.\ if
you want the footer of every odd page, except if it is the last one, to
contain the text ``please turn over'', this can be done as
-follows\footnote{This requires a reasonably recent version of the
- \texttt{ifthen} package.}:
+follows:
\begin{verbatim}
\usepackage{lastpage}
@@ -1080,18 +1023,30 @@ follows\footnote{This requires a reasonably recent version of the
In technical documentation very often page numbers are used of the form
2-10 where the first number is the chapter number and the second is the
pagenumber relative to the chapter. Sometimes section is used rather than
-chapter. The package \textsf{chappg} can be used to get this format. If you
-want to change the layout e.g. use a dot rather than a dash, or a section
-rather than a chapter, you should make a private copy and edit it.
-
-This package redefines \Cmd{thepage} as
-\Cmd{arabic\{chapter\}-}\Cmd{arabic\{page\}}.
-Unfortunately this gives numbers rather than letters for appendices. A
-better definition would be \Cmd{thechapter-}\Cmd{arabic\{page\}} but you can
-give this definition yourself after the \Cmd{usepackage\{chappg\}} command.
+chapter. The package \textsf{chappg} can be used to get this format.
+
+Basically this package redefines \Cmd{thepage} as
+\Cmd{thechapter}\Cmd{chappgsep}\Cmd{arabic\{page\}}, where \Cmd{chappgsep} by default is ``-''. If you want do use a different separator, you must redefine \Cmd{chappgsep}, for example to use an en-dash:
+
+\begin{verbatim}
+\renewcommand{\chappgsep}{--}
+\end{verbatim}
+
+To use a different prefix, for example the section number, use the \Cmd{pagenumbering\{bychapter\}} command with an optional argument specifying the prefix.
+\CmdIndex{pagenumbering}
+
+\begin{verbatim}
+\pagenumbering[\thesection]{bychapter}
+\end{verbatim}
+
What the package also does is reset the page number to 1 at the beginning
of each chapter.
+There is a caveat when you have appendixes in your document. Before the
+\Cmd{appendix} command you should give a \Cmd{clearpage} or
+\Cmd{cleardoublepage}. See the \textsf{chappg} documentation for
+details.
+
There is a fundamental difference between the page numbering of the style
``\emph{m} of \emph{n}'' as described in the previous section and the
current one. The \emph{m} of \emph{n} style is only used in the page header
@@ -1123,7 +1078,7 @@ any of the above mentioned changes. If this is not possible you can use the
\texttt{afterpage} package with:\\
\Cmd{afterpage\{}\Cmd{lhead\{new value\}\}} or
\CmdIndex{pagenumbering}
-\Cmd{afterpage\{}\Cmd{pagenumbering\{roman\}}. You cannot use \Cmd{afterpage}
+\Cmd{afterpage\{}\Cmd{pagenumbering\{roman\}\}}. You cannot use \Cmd{afterpage}
to change the \Cmd{pagestyle} as the commands issued by \Cmd{afterpage}
are local in a group, and the \Cmd{pagestyle} command makes only local
changes. The \Cmd{pagenumbering} and the \textsf{fancyhdr} commands
@@ -1180,11 +1135,8 @@ the following:
You cannot use \latex/'s mark mechanisms for this if you also want to use
chapter and section information.
-The fancyhdr distribution includes a package that gives you
-two extra marks that can be used in this situation\footnote{After I made
- this package I discovered a package \texttt{secret.sty} that does a
- similar thing to mark confidential paragraphs if they cross a page
- boundary. It does it, however, by changing the output routine.}.
+The \textsf{extramarks} package gives you
+two extra marks that can be used in this situation.
Here is a way to use this package:
\begin{verbatim}
@@ -1207,32 +1159,24 @@ be broken at that boundary and the extramarks would come on the wrong page.
There are two new marks that can be used in the page layout with this
package: If commands of the form
\verb|\extramarks{|$m_1$\verb|}{|$m_2$\verb|}| are given
-\CmdIndex{firstleftxmark}
-\Cmd{firstleftxmark}\footnote{%
- In extramarks.sty before version 2.0 only the shorthand commands
- \Cmd{firstxmark} and \Cmd{lastxmark} were defined.}
-gives you the first $m_1$ value,
+\CmdIndex{firstxmark}
+\CmdIndex{lastxmark}
+\Cmd{firstxmark} gives you the first $m_1$ value and
+\Cmd{lastxmark} gives you the last $m_2$ value
+of the current page.
+
+In case you want the last $m_1$ value or the first $m_2$ value, you can use the \Cmd{lastleftxmark} or \Cmd{firstrightxmark}, respectively. For symmetry reasons there are also commands \Cmd{firstleftxmark} (=\Cmd{firstxmark}), \Cmd{lastrightxmark} (=\Cmd{lastxmark}), \Cmd{topleftxmark} (=\Cmd{topxmark}) and \Cmd{toprightxmark}.
\CmdIndex{lastleftxmark}
-\Cmd{lastleftxmark} gives you the last $m_1$ value,
\CmdIndex{firstrightxmark}
-\Cmd{firstrightxmark} gives you the first $m_2$ value and
+\CmdIndex{firstleftxmark}
\CmdIndex{lastrightxmark}
-\Cmd{lastrightxmark} gives you the last $m_2$ value
-of the current page.
-\CmdIndex{firstxmark}
-Also for convenience (similar to the standard \latex/ marks)
-\Cmd{firstxmark} is an alias for \Cmd{firstleftxmark} and
-\CmdIndex{lastxmark}
-\Cmd{lastxmark} is an alias for \Cmd{lastrightxmark}.
-There is also a \Cmd{topxmark} or \Cmd{topleftxmark} similar to \tex/'s
-\Cmd{topmark} but it probably is not of much use.
+\CmdIndex{topleftxmark}
+\CmdIndex{toprightxmark}
+The package also gives you the \Cmd{firstleftmark} and \Cmd{lastrightmark}
+commands that complement the standard \latex/ marks.
\CmdIndex{firstleftmark}
\CmdIndex{lastrightmark}
-Finally it also gives you the \Cmd{firstleftmark} and \Cmd{lastrightmark}
-commands that complement the standard \latex/ marks.
-
-
To stress the point that marks are the correct way to do this, let me
give you a ``solution'' that will not work\footnote{Actually there is
@@ -1560,8 +1504,7 @@ There are a number of ways to prevent this:
next page.
\item use the \texttt{flafter} package which causes floats never to be
placed ``backwards''.
-\item use the command \Cmd{suppressfloats[t]}\footnote{This command and the
- ``!'' placement parameter are not defined in \LaTeX2.09.}. This
+\item use the command \Cmd{suppressfloats[t]}. This
command will cause floats for the top position \emph{on this page} to be
moved to the next page. This can also be done with \texttt{[b]} or
without parameter for all floats on this page.
@@ -1588,10 +1531,9 @@ give the command:
\end{verbatim}
in the preamble. Now you will be able to
specify \texttt{[H]} as the position parameter, which will mean ``HERE and only
-HERE''. This may cause an unwanted page break however\footnote{There used
-to be a \texttt{here.sty} with the same effect, but this is incompatible
-with \LaTeXe}. If you want to avoid the unwanted pagebreak, i.e. let
-\LaTeX{} move the float only if it doesn't fit on the page, the use the
+HERE''. This may cause an unwanted page break however.
+If you want to avoid the unwanted pagebreak, i.e. let
+\LaTeX{} move the float only if it doesn't fit on the page, then use the
\textsf{afterpage} package with:
\begin{verbatim}
\afterpage{\clearpage \begin{figure}[H] ... \end{figure}}
@@ -1710,13 +1652,28 @@ start your multipage figure on an even page, however.
\section{Contact information}
Piet van Oostrum\\
-Dept.\ of Computer Science\\
-Utrecht University\\
-P.O. Box 80.089\\
-3508 TB Utrecht, The Netherlands\\
-Telephone: +31 30 2532180 Telefax: +31 30 2513791\\
-E-mail: piet@cs.uu.nl \\
-WWW: http://www.cs.uu.nl/people/piet
+E-mail: piet@vanoostrum.org \\
+WWW: http://www.pietvanoostrum.com
+
+\section{Version information}
+\begin{itemize}
+\item Version 1.0. March 11, 2003. This is the version that was distributed for a
+ long time on CTAN. Version history before this has been lost.
+\item Version 2.0. August 27, 2016:
+ \begin{itemize}
+ \item Removed references to fixmarks.sty as that is no longer used.
+ \item References to older \LaTeX{} versions removed.
+ \item Removed obsolete source code of \texttt{extramarks.sty}
+ \item Changed font commands to \Cmd{textbf} and \Cmd{textsl}.
+ \item Added description of the \Cmd{fancy\ldots offset} commands.
+ \item Added various \Cmd{\ldots xmark} commands from \texttt{extramarks.sty}.
+ \item Various corrections applied.
+ \item Updated contact information.
+ \item Added Version information. :)
+ \end{itemize}
+
+\end{itemize}
+
\printindex
diff --git a/Master/texmf-dist/tex/latex/fancyhdr/extramarks.sty b/Master/texmf-dist/tex/latex/fancyhdr/extramarks.sty
index 4f4070d5b00..0f0a97ebb2c 100644
--- a/Master/texmf-dist/tex/latex/fancyhdr/extramarks.sty
+++ b/Master/texmf-dist/tex/latex/fancyhdr/extramarks.sty
@@ -1,8 +1,8 @@
-% Extra marks for latex. Version 2.0.
+% Extra marks for latex. Version 2.1.
% Piet van Oostrum,
-% Dept of Computer and Information Sciences, University of Utrecht,
-% Padualaan 14, P.O. Box 80.089, 3508 TB Utrecht, The Netherlands
-% Telephone: +31 30 2532180. Email: piet@cs.uu.nl
+% [Formerly] Dept of Computer and Information Sciences, University of Utrecht,
+% Email: piet@vanoostrum.org
+% WWW: http://www.pietvanoostrum.com
% ========================================================================
% LICENCE:
% This file may be distributed under the terms of the LaTeX Project Public
@@ -24,6 +24,10 @@
% March 3, 2004
% version 2.0
% Release.
+% Aug. 27, 2016
+% version 2.1
+% Added a \ProvidesPackage line.
+% Updated contact information.
% This package gives you two additional marks.
% \extramarks{m1}{m2} define two extra marks for headers/footers
@@ -58,6 +62,8 @@
% if marginpars or floats are used, as LaTeX clobbers TeX's topmark in this
% case.
+\NeedsTeXFormat{LaTeX2e}[1995/06/01]%
+\ProvidesPackage{extramarks}[2016/08/27 2.1 Extra marks]%
\newtoks\@temptokenb
%Just in case.
diff --git a/Master/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty b/Master/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty
index 77ed4e3012d..11b894e713d 100644
--- a/Master/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty
+++ b/Master/texmf-dist/tex/latex/fancyhdr/fancyhdr.sty
@@ -1,9 +1,9 @@
-% fancyhdr.sty version 3.2
+% fancyhdr.sty version 3.6
% Fancy headers and footers for LaTeX.
% Piet van Oostrum,
-% Dept of Computer and Information Sciences, University of Utrecht,
-% Padualaan 14, P.O. Box 80.089, 3508 TB Utrecht, The Netherlands
-% Telephone: +31 30 2532180. Email: piet@cs.uu.nl
+% [Formerly] Dept of Computer and Information Sciences, University of Utrecht,
+% Email: piet@vanoostrum.org
+% WWW: http://www.pietvanoostrum.com
% ========================================================================
% LICENCE:
% This file may be distributed under the terms of the LaTeX Project Public
@@ -145,6 +145,29 @@
% reset \everypar (the real one) in \fancy@reset because spanish.ldf does
% strange things with \everypar between << and >>.
+% Aug 20, 2016
+% version 3.3
+% Replace `\@ifundefined{chapter}' with `\ifx\chapter\@undefined'
+% because the former subtly make \chapter equal to \relax, which may be
+% undesirable in some cases.
+
+% Aug 21, 2016
+% version 3.4
+% Replace \rm by \normalfont\rmfamily
+% and \sl by \normalfont\slshape
+
+% Aug 21, 2016
+% version 3.5
+% Don't define \footruleskip if it is already defined
+
+% Aug. 27, 2016
+% version 3.6
+% Added a \ProvidesPackage line.
+% Updated contact information.
+
+\NeedsTeXFormat{LaTeX2e}[1995/06/01]%
+\ProvidesPackage{fancyhdr}[2016/08/27 3.6 Extensive control of page headers and footers]%
+
\def\ifancy@mpty#1{\def\temp@a{#1}\ifx\temp@a\@empty}
\def\fancy@def#1#2{\ifancy@mpty{#2}\fancy@gbl\def#1{\leavevmode}\else
@@ -299,7 +322,9 @@
\newlength{\f@ncyO@orf}
\newcommand{\headrulewidth}{0.4pt}
\newcommand{\footrulewidth}{0pt}
-\newcommand{\footruleskip}{.3\normalbaselineskip}
+%% Memoir also define \footruleskip.
+%% Don't define \footruleskip if it is already defined
+\@ifundefined{footruleskip}{\newcommand{\footruleskip}{.3\normalbaselineskip}}{}
% Fancyplain stuff shouldn't be used anymore (rather
% \fancypagestyle{plain} should be used), but it must be present for
@@ -337,13 +362,13 @@
% lefthead empty on ``plain'' pages, \rightmark on even, \leftmark on odd pages
% evenhead empty on ``plain'' pages, \leftmark on even, \rightmark on odd pages
\if@twoside
- \fancyhead[el,or]{\fancyplain{}{\sl\rightmark}}
- \fancyhead[er,ol]{\fancyplain{}{\sl\leftmark}}
+ \fancyhead[el,or]{\fancyplain{}{\normalfont\slshape\rightmark}}
+ \fancyhead[er,ol]{\fancyplain{}{\normalfont\slshape\leftmark}}
\else
- \fancyhead[l]{\fancyplain{}{\sl\rightmark}}
- \fancyhead[r]{\fancyplain{}{\sl\leftmark}}
+ \fancyhead[l]{\fancyplain{}{\normalfont\slshape\rightmark}}
+ \fancyhead[r]{\fancyplain{}{\normalfont\slshape\leftmark}}
\fi
-\fancyfoot[c]{\rm\thepage} % page number
+\fancyfoot[c]{\normalfont\rmfamily\thepage} % page number
% Use box 0 as a temp box and dimen 0 as temp dimen.
% This can be done, because this code will always
@@ -396,15 +421,18 @@
% the version 1 documentation) will still work.
%
\@ifundefined{MakeUppercase}{\def\MakeUppercase{\uppercase}}{}%
-\@ifundefined{chapter}{\def\sectionmark##1{\markboth
+\ifx\chapter\@undefined
+\def\sectionmark##1{\markboth
{\MakeUppercase{\ifnum \c@secnumdepth>\z@
\thesection\hskip 1em\relax \fi ##1}}{}}%
\def\subsectionmark##1{\markright {\ifnum \c@secnumdepth >\@ne
- \thesubsection\hskip 1em\relax \fi ##1}}}%
-{\def\chaptermark##1{\markboth {\MakeUppercase{\ifnum \c@secnumdepth>\m@ne
+ \thesubsection\hskip 1em\relax \fi ##1}}%
+\else
+\def\chaptermark##1{\markboth {\MakeUppercase{\ifnum \c@secnumdepth>\m@ne
\@chapapp\ \thechapter. \ \fi ##1}}{}}%
\def\sectionmark##1{\markright{\MakeUppercase{\ifnum \c@secnumdepth >\z@
- \thesection. \ \fi ##1}}}}%
+ \thesection. \ \fi ##1}}}%
+\fi
%\csname ps@headings\endcsname % use \ps@headings defaults if they exist
\ps@@fancy
\gdef\ps@fancy{\@fancyplainfalse\ps@@fancy}%