toptesi (9mar13)

git-svn-id: svn://tug.org/texlive/trunk@29321 c570f23f-e606-0410-a88d-b1316a301751

15 files changed, 218 insertions, 165 deletions

diff --git a/Master/texmf-dist/doc/latex/toptesi/README b/Master/texmf-dist/doc/latex/toptesi/README
index ce984f132a8..84934690b8a 100644
--- a/Master/texmf-dist/doc/latex/toptesi/README
+++ b/Master/texmf-dist/doc/latex/toptesi/README
@@ -1,4 +1,4 @@
-TOPtesi bundle version 5.62a of 2013/01/30
+TOPtesi bundle version 5.7 of 2013/03/08
 Copyright 2012 Claudio Beccari
 LaTeX Project Public Licence LPPL v.1.3 (or later)
 
@@ -19,7 +19,7 @@ to the double degree programs of the European Union Erasmus programs.
 This important upgrade is intended to be compliant with XeLaTeX and 
 the documentation explains how to obtain PDF/A-1b archivable files 
 from both pdfLaTeX and XeLaTeX. 
-The version number 5.62 is a stable version.
+The version number 5.70 is a stable version.
 
 For installation, if the package is not already installed in your
 TeX system distribution, either read the Italian documentation in
diff --git a/Master/texmf-dist/doc/latex/toptesi/manifest.txt b/Master/texmf-dist/doc/latex/toptesi/manifest.txt
index f8fa8d60c33..e9f4ae93792 100644
--- a/Master/texmf-dist/doc/latex/toptesi/manifest.txt
+++ b/Master/texmf-dist/doc/latex/toptesi/manifest.txt
@@ -1,4 +1,4 @@
-manifest.txt (version 5.62a)
+manifest.txt (version 5.70)
 Copyright 2008-2012 Claudio Beccari
 
 This work may be distributed and/or modified under the conditions of
diff --git a/Master/texmf-dist/doc/latex/toptesi/toptesi-doc-xetex-a.pdf b/Master/texmf-dist/doc/latex/toptesi/toptesi-doc-xetex-a.pdf
index 5c0f16251c9..c6069fc584c 100644
--- a/Master/texmf-dist/doc/latex/toptesi/toptesi-doc-xetex-a.pdf
+++ b/Master/texmf-dist/doc/latex/toptesi/toptesi-doc-xetex-a.pdf
diff --git a/Master/texmf-dist/doc/latex/toptesi/toptesi-doc-xetex.pdf b/Master/texmf-dist/doc/latex/toptesi/toptesi-doc-xetex.pdf
index abde1dc3e8e..a6f2e3897d0 100755
--- a/Master/texmf-dist/doc/latex/toptesi/toptesi-doc-xetex.pdf
+++ b/Master/texmf-dist/doc/latex/toptesi/toptesi-doc-xetex.pdf
diff --git a/Master/texmf-dist/doc/latex/toptesi/toptesi-doc-xetex.tex b/Master/texmf-dist/doc/latex/toptesi/toptesi-doc-xetex.tex
index 98604288ea1..620e732fac1 100644
--- a/Master/texmf-dist/doc/latex/toptesi/toptesi-doc-xetex.tex
+++ b/Master/texmf-dist/doc/latex/toptesi/toptesi-doc-xetex.tex
@@ -351,11 +351,16 @@ dissertazioni di dottorato da comporre presso il Politecnico di Torino;
 l'acronimo TOP sta per \textcolor{red}{TO}rino \textcolor{red}{P}olitecnico e naturalmente gioca un po' anche sull'altro significato della parola inglese ``top''.
 
 Tuttavia il pacchetto non è  stato creato solo per il Politecnico
-di Torino; le informazioni relative a questo ateneo sono di
-default, così come la facoltà di ingegneria è la facoltà di
-default. Ma i comandi predisposti consentono di personalizzare il
-pacchetto per ogni ateneo e ogni facoltà e, oserei dire, in ogni
-lingua.
+di Torino, il cui nome è il nome preimpostato;  invece  la stringa ``Facoltà di~'' e il nome della facoltà sono vuote. Questo dipende dall'ultima riforma universitaria approvata in Italia, che ha obbligato gli atenei a riformulare gli statuti in modo da eliminare sostanzialmente le facoltà; in alcuni casi strutture didattiche equivalenti alle facoltà sono sopravvissute sotto altro nome, in altri sono sparite definitivamente. In alcuni casi il coordinamento delle attività didattiche è passato ai dipartimenti. Lo studente deve quindi informarsi presso la sua segreteria didattica competente per sapere come debba essere intestato il frontespizio delle monografie, tesi magistrali o dissertazioni di dottorato. I comandi predisposti in questo pacchetto consentono di personalizzare la composizione del proprio lavoro finale per ogni ateneo e ogni struttura didattica e, oserei dire, in ogni lingua.
+
+Presso il Politecnico di Torino, l'ateneo preso come riferimento, le facoltà non esistono più; perciò il valore preimpostato per la stinga ``Facoltà di~'' è nullo; un test per la composizione del frontespizio verifica la presenza di questa stringa nulla e omette completamente di indicare qualsiasi informazione sulla struttura didattica; in altri atenei potrebbe essere utile inserire nel file di configurazione qualcosa come:
+\begin{verbatim*}
+\StrutturaDidattica{Dipartimento di }
+\struttura{Ingegneria Strutturale}
+\corsodilaurea{Ingegneria di Ponti e strade}
+\end{verbatim*}
+Il nome del corso di laurea potrebbe essere facoltativo se la struttura didattica competente cura la didattica per un solo corso di laurea, ma sicuramente questo corso non ha lo stesso nome della struttura didattica, quindi è opportuno specificarlo anche in questi casi; se invece la segreteria competente non richiede il nome di nessuna struttura didattica, allora il corso degli studi deve essere necessariamente indicato. Si noti: per facilitare l'inserimento di queste informazioni sono stati predisposti i comandi \verb|\StrutturaDidattica|, equivalente a \verb|\FacoltaDi|, e \verb|\struttura|, equivalente a \verb|\facolta|.
+
 
 Tenete conto che \textsf{TOPtesi} è già stato usato anche per
 scrivere tesi in filologia classica greca e in filologia copta;
@@ -617,7 +622,7 @@ ancora, fuori dalla carta, sarebbe opportuno che le righe del
 programma non fossero più lunghe di una ottantina di caratteri.
 
 \section{Il logo dell'ateneo}
-Non è generalmente necessario inserire nel frontespizio il logo dell'ateneo; controllate presso la vostra facoltà o presso la vostra segreteria competente le regole fissate per la composizione del frontespizio. Se il logo è richiesto, allora la segreteria vi dice anche quale logo usare e da dove scaricarne il file che ne contiene la descrizione grafica.
+Non è generalmente necessario inserire nel frontespizio il logo dell'ateneo; controllate presso la vostra  la vostra segreteria competente le regole fissate per la composizione del frontespizio. Se il logo è richiesto, allora la segreteria vi dice anche quale logo usare e da dove scaricarne il file che ne contiene la descrizione grafica.
 
 Controllate se è un file vettoriale (estensione \file{.pdf} oppure \file{.eps}) oppure bitmapped (estensione \file{.jpg}, \file{.png}, \file{.bmp}, \file{.wmf}, \file{.tiff},\dots). Ricordate che \prog{pdflatex} e \prog{xelatex} possono incorporare solo i formati \file{.pdf}, \file{eps}\footnote{Dall'edizione di TeX Live 2011 anche \prog{pdflatex} è in grado di incorporare file in formato \file{.eps}, mentre prima era necessario convertirli preventivamente in formato \file{.pdf}.}, \file{.jpg} o \file{.png}). Se il file viene fornito in un formato diverso da questi quattro, è necessario convertirlo in uno di questi formati. 
 
@@ -678,7 +683,7 @@ tesi, la monografia o la dissertazione.
 Qui dirò solo come si comincia a scrivere il file sorgente della
 tesi. Ci sono essenzialmente due vie, ognuna delle quali offre vantaggi e svantaggi, quindi non si può dire a priori quale via sia la più indicata:
 \begin{enumerate}
-\item si compone un unico file come esemplificato con il file \texttt{toptesi-example.tex} allegato alla documentazione di \textsf{TOPtesi}. Questo file permette di sperimentare diverse cose semplicemente mettendo o togliendo dei segni di commento all'inizio delle righe del preambolo che contengono alcuni comandi particolari. Esso è completo di bibliografia e quell'unico file permette di comporre una tesi completa; ovviamente può essere usato come modello per la vostra tesi; basta cambiare il contenuto dei comandi che contengono i nomi dei candidati, dei relatori, del titolo, dell'ateneo, della facoltà, eccetera. Ovviamente bisogna cambiare anche il contenuto dei capitoli e della bibliografia.
+\item si compone un unico file come esemplificato con il file \texttt{toptesi-example.tex} allegato alla documentazione di \textsf{TOPtesi}. Questo file permette di sperimentare diverse cose semplicemente mettendo o togliendo dei segni di commento all'inizio delle righe del preambolo che contengono alcuni comandi particolari. Esso è completo di bibliografia e quell'unico file permette di comporre una tesi completa; ovviamente può essere usato come modello per la vostra tesi; basta cambiare il contenuto dei comandi che contengono i nomi dei candidati, dei relatori, del titolo, dell'ateneo, della eventuale facoltà, eccetera. Ovviamente bisogna cambiare anche il contenuto dei capitoli e della bibliografia.
 
 \item Si spezza il file sorgente in un numero adeguato di file parziali da gestire come specificato qui di seguito; ogni file parziale conterrà solo una parte della tesi, per esempio un solo capitolo; siccome il tutto è gestito dal master file, ciascun file parziale non dovrà più contenere la dichiarazione della classe né il preambolo né le righe \verb|\begin{document}| e \verb|\end{document}|, ma solo il materiale relativo ad uno specifico capitolo cominciando appunto con la riga che ne specifica il titolo:
 \verb|\chapter{Il titolo di questo capitolo}|.
@@ -894,8 +899,8 @@ questo spostamento non solo perché il margine destro resta di una
 certa ampiezza e può accogliere le note
 marginali\marginpar{\small\sffamily\raggedright Questa è  una nota
 marginale}, se si decide di farne uso, ma anche perché, almeno al
-Politecnico di Torino, la copia da depositare nella segreteria di
-facoltà non deve essere realizzata su carta, ma deve essere
+Politecnico di Torino, la copia da depositare nella segreteria 
+didattica non deve essere realizzata su carta, ma deve essere
 registrata su un dischetto o su un CD-ROM in formato \texttt{.pdf}
 (o in formato \texttt{.doc} se non si usa \LaTeX) e chi legge la
 tesi sullo schermo preferisce senz'altro avere il testo centrato
@@ -1298,9 +1303,10 @@ Comando             & Default  &  Scopo               &   Esempio d'uso   \\
                                     \cs{\ateneo\{II Università di Roma\}} \\
 \cs{\nomeateneo\s{...\s}}& nessuno&   Definisce il nome proprio dell'Ateneo &
                                     \cs{\nomeateneo\{Tor Vergata\}}           \\
-\cs{\facolta[...]\s{...\s}}& Ingegneria& Definisce il nome della
+\cs{\facolta[...]\s{...\s}}& nessuno & Definisce il nome della
 Facoltà opzionalmente con l'indicazione dell'ordinale&
                                     \cs{\facolta[III]\d\{Scienze\}}         \\
+\cs{\struttura}				&& sinonimo del comando \cs{\facolta}&\\
 \cs{\corsodilaurea\s{...\s}}& nessuno& Definire il nome del corso di laurea &
                                     \cs{\corsodilaurea\d\{Fisica\}}         \\
 \cs{\corsodidottorato\{...\}}& nessuno&Definisce il nome del corso di dottorato&
@@ -1313,7 +1319,7 @@ Facoltà opzionalmente con l'indicazione dell'ordinale&
                                     \cs{\sottotitolo\{Metodo Barometrico\}} \\
 \cs{\Materia\{...\}}&nessuno&Definisce la materia su cui verte la tesi &
                                     \cs{\Materia\{Remote Sensing\}}         \\
-\cs{\materia\{...\}}&nessuno&sinonimo di \cs{\Materia} &
+\cs{\materia\{...\}}&nessuno&sinonimo del comando \cs{\Materia} &
                                     \cs{\materia\d\{Letteratura ostrogota\}}  \\
 \bottomrule
 \end{tabular}}
@@ -1414,7 +1420,13 @@ tesi di laurea e della dissertazione di dottorato. Comando per comporre il verso
 \makebox[\textwidth]{\small%
 \begin{tabular}{@{}p{.35\textwidth}p{.63\textwidth}@{}}
 \toprule
-\cs{\FacoltaDi\{...\}}\V        & \serve ``Facoltà di'' prima del nome della facoltà \\
+\cs{\FacoltaDi\{...\}}\V        & definisce una stringa con il nome generico della
+                                struttura didattica, per esempio ``Scuola di~'', 
+                                prima del nome della struttura; di default è 
+                                impostata una stringa nulla, cosicché non viene 
+                                scritto nulla nel frontespizio in merito alla struttura
+                                didattica competente\\
+\cs{\StrutturaDidattica\{...\}}	 & sinonimo del comando  \cs{\FacoltaDi}\\
 \cs{\DottoratoIn\{...\}}        & \serve ``Dottorato in'' prima del nome del dottorato\\
 \cs{\CorsoDiLaureaIn\{...\}}    & \serve ``Corso di Laurea in'' prima del nome del corso di laurea\\
 \cs{\TesiDiLaurea\{...\}}       & \serve ``Tesi di Laurea''\\
@@ -1424,7 +1436,7 @@ tesi di laurea e della dissertazione di dottorato. Comando per comporre il verso
 \cs{\CandidateName\{...\}}      & \serve ``Candidato''; per questo e i due comandi
                                 successivi il programma riesce
                                 a scegliere la stringa giusta adattata in numero e genere;
-                                 nel cambiare queste stringhe
+                                nel cambiare queste stringhe
                                 il compositore ha una sola possibilità e deve scegliere
                                 direttamente il genere e il numero.\\
 \cs{\AdvisorName\{...\}}        & \serve ``Relatore''\\
diff --git a/Master/texmf-dist/doc/latex/toptesi/toptesi-example-xetex.pdf b/Master/texmf-dist/doc/latex/toptesi/toptesi-example-xetex.pdf
index d4368f7e60e..60c75f54590 100755
--- a/Master/texmf-dist/doc/latex/toptesi/toptesi-example-xetex.pdf
+++ b/Master/texmf-dist/doc/latex/toptesi/toptesi-example-xetex.pdf
diff --git a/Master/texmf-dist/doc/latex/toptesi/toptesi-example-xetex.tex b/Master/texmf-dist/doc/latex/toptesi/toptesi-example-xetex.tex
index 1dd85916faf..51608dc230d 100755
--- a/Master/texmf-dist/doc/latex/toptesi/toptesi-example-xetex.tex
+++ b/Master/texmf-dist/doc/latex/toptesi/toptesi-example-xetex.tex
@@ -40,7 +40,7 @@
 % Commentare le righe seguenti se NON si non si vogliono i link ipertestuali; in questo
 % caso non usare nemmeno l'opzione pdfa. Se si specifica pdfa e si vogliono i
 % collegamenti ipertestuali, allora conservare solo le righe del comando \hypersetup.
-\csname ifT@Ppdfa\endcsname\else\usepackage{hyperref}\fi
+\usepackage{hyperref}
 \hypersetup{%
     pdfpagemode={UseOutlines},
     bookmarksopen,
diff --git a/Master/texmf-dist/doc/latex/toptesi/toptesi-example.pdf b/Master/texmf-dist/doc/latex/toptesi/toptesi-example.pdf
index e344454ba0f..359775790a9 100644
--- a/Master/texmf-dist/doc/latex/toptesi/toptesi-example.pdf
+++ b/Master/texmf-dist/doc/latex/toptesi/toptesi-example.pdf
diff --git a/Master/texmf-dist/doc/latex/toptesi/toptesi-example.tex b/Master/texmf-dist/doc/latex/toptesi/toptesi-example.tex
index bfc1d53f5e1..e2860c6adbb 100644
--- a/Master/texmf-dist/doc/latex/toptesi/toptesi-example.tex
+++ b/Master/texmf-dist/doc/latex/toptesi/toptesi-example.tex
@@ -4,7 +4,6 @@
 
 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% 1.o Esempio con la classe toptesi
 \documentclass[12pt,twoside,cucitura]{toptesi}
-\usepackage{lipsum}
 %\documentclass[twoside,cucitura,pdfa]{toptesi}
 %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% 2.o Esempio con la classe toptesi
 % \documentclass[11pt,twoside,oldstyle,autoretitolo,classica,greek]{toptesi}
@@ -204,13 +203,6 @@ Essi furono per la prima volta osservati da uno dei candidati mentre
 sperimentava l'efficacia del tubo occhiale che aveva appena inventato
 rielaborando una idea sentita di seconda mano da un viaggiatore appena arrivato
 dai Paesi Bassi.
-
-%\blankpagestyle{headings}
-
-%\lipsum[1-2]
-
-
-
 \chapter{Il barometro}
 \section{Generalit{\`a}}
 \begin{interlinea}{0.87} Il barometro, come dice il nome, serve per
@@ -315,6 +307,7 @@ descritto cost{\`\i}.
 
 
 
+
 \begin{thebibliography}{9}
 \bibitem{gal} G.~Galilei, {\em Nuovi studii sugli astri medicei}, Manunzio,
         Venetia, 1612.
diff --git a/Master/texmf-dist/source/latex/toptesi/toptesi.dtx b/Master/texmf-dist/source/latex/toptesi/toptesi.dtx
index 96286084513..8bf510aed60 100644
--- a/Master/texmf-dist/source/latex/toptesi/toptesi.dtx
+++ b/Master/texmf-dist/source/latex/toptesi/toptesi.dtx
@@ -28,22 +28,24 @@ and the derived files:
 toptesi.cls, toptesi.sty, topfront.sty, topcommand.sty,
 toptesi.cfg, and the English documentation toptesi.pdf.
  
-Furthermore the bundle contains the documentation source file toptesi-doc-xetex.tex  
-and the derived file toptesi-doc-xetex.pdf.
+Furthermore the bundle contains the documentation source
+file toptesi-doc-xetex.tex and the derived file 
+toptesi-doc-xetex.pdf.
 
-The toptesi-example.tex source file is just an example that shows how
-to use the various commands; by commenting or uncommenting certain
-source lines it is possible to typeset different kind of theses and their
-frontpages.
+The toptesi-example.tex source file is just an example 
+that shows how to use the various commands; by commenting 
+or uncommenting certain source lines it is possible to 
+typeset different kind of theses and their frontpages.
 
-The toptesi.cfg file is a sample of a local configuration file that can be
-freely edited and modified.
+The toptesi.cfg file is a sample of a local configuration 
+file that can be freely edited and modified.
 
-By running pdflatex on toptesi.dtx the user gets the class, sty and cfg files
-and the English documentation file in pdf format.
+By running pdflatex on toptesi.dtx the user gets the class, 
+sty and cfg files and the English documentation file in
+ pdf format.
 
-The documentation file toptesi-doc-xetex.pdf is in Italian; its source file is 
-another example of how to use toptesi.
+The documentation file toptesi-doc-xetex.pdf is in Italian; 
+its source file is another example of how to use toptesi.
 \endpostamble
 \askforoverwritefalse
 
@@ -85,7 +87,7 @@ another example of how to use toptesi.
 % \iffalse
 %<*driver>
 \documentclass{ltxdoc}
-\ProvidesFile{toptesi.dtx}[2013/01/29 v.5.62a Documented TeX file for
+\ProvidesFile{toptesi.dtx}[2013/03/08 v.5.70 Documented TeX file for
 the TOPtesi bundle]
 \GetFileInfo{toptesi.dtx}
 \title{The TOPtesi bundle}
@@ -102,7 +104,7 @@ the TOPtesi bundle]
 %</driver>
 % \fi
 %
-% \CheckSum{2635}
+% \CheckSum{2654}
 %
 %% \CharacterTable
 %%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
@@ -693,7 +695,7 @@ the TOPtesi bundle]
 %    \begin{macrocode}
 \NeedsTeXFormat{LaTeX2e}
 \ProvidesClass{toptesi}%
-[2013/01/29 v.5.62a Class for typesetting university theses]
+[2013/03/08 v.5.70 Class for typesetting university theses]
 %    \end{macrocode}
 %
 % The class itself is very simple since it requires just the \texttt{report} document
@@ -747,7 +749,7 @@ the TOPtesi bundle]
 %    \begin{macrocode}
 \NeedsTeXFormat{LaTeX2e}
 \ProvidesPackage{toptesi}%
-[2013/01/29 v.5.62a Extension for toptesi.cls]%
+[2013/03/08 v.5.70 Extension for toptesi.cls]%
 %    \end{macrocode}
 %
 % We start with defining the debugging macros; these trace commands and macros
@@ -1393,22 +1395,26 @@ Skipping any redefinition\MessageBreak}%
 \def\english{\selectlanguage{english}}%
 \let\inglese\english
 %    \end{macrocode}
-% At the beginning of the document the following commands are executed; the general macro
-% |\italiano| sets the summary and the acknowledgements names in Italian, as the default
-% language; and the |\@chapapp| macro is redefined so as to agree with the default language.
-% If a different default language is desired, we recall it again, it is necessary to do the
-% following:
+% At the beginning of the document the following commands are executed;
+% the general macro |\italiano| sets the summary and the acknowledgements
+% names in Italian, as the default language; and the |\@chapapp| macro is
+% redefined so as to agree with the default language. If a different
+% default language is desired, we recall it again, it is necessary to do
+% the following:
 % \begin{itemize}
-% \item specify |\english| \emph{after} the |\begin{document}| statement, if English is
-%     supposed to be the default language, or
-% \item specify the language name, other than Italian or English, among the class options; use
-%     the |\ExtendCaptions| macro for extending the list of sectioning commands infix strings
-%     as explained above; specify with |\selectlanguage| the new language as the default one
+% \item specify |\english| \emph{after} the |\begin{document}| statement,
+%     if English is supposed to be the default language, or
+% \item specify the language name, other than Italian or English, among
+%     the class options; use the |\ExtendCaptions| macro for extending the
+%     list of sectioning commands infix strings as explained above;
+%     specify with |\selectlanguage| the new language as the default one
 %    \emph{after} the |\begin{document}| statement.
-% \item If XeLaTeX is being used for typesetting it suffixes to specify in the preamble the name
-% of the other language to be used, by means of the |setotherlanguage| command, and to define the
-% summary and acknowledgments names in the same way as with pdf\/\LaTeX; the same must be done at
-% the beginning of the document to declare the new language a the default one.
+% \item If XeLaTeX is being used for typesetting it suffixes to specify
+%    in the preamble the name of the other language to be used, by means
+%    of the |setotherlanguage| command, and to define the summary and
+%    acknowledgments names in the same way as with pdf\/\LaTeX; the same
+%    must be done at the beginning of the document to declare the new
+%    language a the default one.
 % \end{itemize}
 %    \begin{macrocode}
 \AtBeginDocument{%
@@ -1417,8 +1423,13 @@ Skipping any redefinition\MessageBreak}%
     }
 %    \end{macrocode}
 %
-% At last the subsidiary and independent packages \texttt{topcoman} and \texttt{topfront}
-% are requested for input. For using XeLaTeX as the typesetting engine it's necessary to load such packages at the ``begin document'' step, so that all a the other settings, especially fonts are already established. May be it should be better done also when using pdf\/\LaTeX\ as the typesetting engine, but the past experience has not shown any inconvenience. 
+% At last the subsidiary and independent packages \texttt{topcoman} and
+% \texttt{topfront} are requested for input. For using XeLaTeX as the
+% typesetting engine it's necessary to load such packages at the ``begin
+% document'' step, so that all a the other settings, especially fonts
+% are already established. May be it should be better done also when
+% using pdf\/\LaTeX\ as the typesetting engine, but the past experience
+% has not shown any inconvenience. 
 %    \begin{macrocode}
 \ifxetex
 	\AtBeginDocument{\RequirePackage{topfront}
@@ -1527,18 +1538,21 @@ Skipping any redefinition\MessageBreak}%
 \fi
 %    \end{macrocode}
 %
-% Since theses in humanities may end up to occupy several volumes (classically ``tomo''
-% in Italian means ``volume'', although the latter spelling is valid also in Italian with
-% the same meaning but appears to be  neglected by the humanists; in English ``tome''
-% indicates a ``large book''; in Italian the meaning nuance of ``tomo'' is a little
-% different because it is used to indicate the volumes into which a large typeset work is
-% divided; the humanists, as usual, know well their words and use them properly!)
-% a mechanism is set up to create a different title page for each volume; we need a volume
-% counter and a command to start each volume; the |\frontespizio| macro typesets the real
-% title page and we have already seen that it can print the volume ordinal. The localization
-% allows to change the infix string that is going to be printed. When several tomes are
-% involved, instead of using the |\frontespizio| macro, use the |\tomo| one, that provides
-% to stepping up the volume counter before actually printing the new tome title page.
+% Since theses in humanities may end up to occupy several volumes (classically
+% ``tomo'' in Italian means ``volume'', although the latter spelling is valid
+% also in Italian with  the same meaning but appears to be  neglected by the
+% humanists; in English ``tome'' indicates a ``large book''; in Italian the
+% meaning nuance of ``tomo'' is a little different because it is used to
+% indicate the volumes into which a large typeset work is divided; the
+% humanists, as usual, know well their words and use them properly!) a
+% mechanism is set up to create a different title page for each volume;
+% we need a volume counter and a command to start each volume; the
+% |\frontespizio| macro typesets the real title page and we have already
+% seen that it can print the volume ordinal. The localization allows to
+% change the infix string that is going to be printed. When several tomes
+% are involved, instead of using the |\frontespizio| macro, use the |\tomo|
+% one, that provides to stepping up the volume counter before actually
+% printing the new tome title page.
 %    \begin{macrocode}
 \newcounter{tomo}
 \newcommand*{\tomo}{\clearpage\stepcounter{tomo}\frontespizio}
@@ -1672,7 +1686,8 @@ Skipping any redefinition\MessageBreak}%
 % sets; of course specialized extensions are available on CTAN, but as a poor man solution
 % the command |\nota| was introduced that inserts a note with a symbol as a note mark;
 % the symbol \emph{must} be a mathematical symbol as the dagger or the double dagger;
-% by default it is the asterisk. At the same time the default definition of the mathematical
+% by default it is the asterisk. At the same time the default definition of the
+% mathematical
 % asterisk is that of a binary operator; I have experienced that the note symbol gets a
 % better positioning if it is used as an ordinary symbol through |\mathord|. This
 % is why its math code is redefined. A final unusual request was to be able to put a blank
@@ -1757,7 +1772,7 @@ Skipping any redefinition\MessageBreak}%
 % \fi
 %    \begin{macrocode}
 \NeedsTeXFormat{LaTeX2e}
-\ProvidesPackage{topfront}[2013/01/29 v.5.62a Title page for TOPtesi]
+\ProvidesPackage{topfront}[2013/03/08 v.5.70 Title page for TOPtesi]
 %    \end{macrocode}
 %
 % The title page information depends on the type of ``thesis' that is being typeset.
@@ -1958,7 +1973,12 @@ Skipping any redefinition\MessageBreak}%
 % in place of ``Facolt\`a di~'', since with recent bills, the administrative structure of
 % all Italian universities has been changed and the activities formally assigned to the
 % Faculties may be now the responsibility of other structures that may have different
-% names in different universities.
+% names in different universities. If the internal command defined by |\FacoltaDi|
+% is empty, no name is printed at all and the title page will not have any indication
+% of a particular faculty or other educational structure. Therefore the Degree Course
+% name, specified with |\corsodilaurea| should be always specified. The alias
+% commands |\StrutturaDidattica| and |\struttura| are defined as equivalent
+% commands to |\FacoltaDi| and |\facolta| respectively.
 %
 % Finally |\logosede| gets the name of the graphic file that contains the information
 % relative to the university logo; it may receive also a list of logo file names, as it
@@ -2009,6 +2029,7 @@ Skipping any redefinition\MessageBreak}%
 \def\ateneo#1{\gdef\@ateneo{\expandafter\uppercase{\expandafter #1}}}
 \def\nomeateneo#1{\gdef\@nomeat{\expandafter\uppercase{\expandafter #1}}}
 \newcommand\facolta[2][]{\gdef\@facname{#2}\gdef\@facnumber{#1}}
+\let\struttura\facolta
 
 \newlength{\TPT@logospace}\TPT@logospace=3em\relax
 \newsavebox{\TPT@logobox}
@@ -2073,6 +2094,7 @@ Skipping any redefinition\MessageBreak}%
 % the adjectives.
 %    \begin{macrocode}
 \newcommand\FacoltaDi[1]{\gdef\@faculty{#1}}
+\let\StrutturaDidattica\FacoltaDi
 \newcommand\DottoratoIn[1]{\gdef\@PhDname{#1}}
 \newcommand\CorsoDiLaureaIn[1]{\gdef\@laureaname{#1}}
 \newcommand\TesiDiLaurea[1]{\gdef\@TesiDiLaurea{#1}}
@@ -2143,9 +2165,9 @@ Skipping any redefinition\MessageBreak}%
 \@ifundefined{@ciclo}{\def\@ciclo{}}{}
 \@ifundefined{@ateneo}{\def\@ateneo{POLITECNICO DI TORINO}}{}
 \@ifundefined{@nomeat}{\def\@nomeat{}}{}% Nome proprio dell'ateneo
-\@ifundefined{@facolta}{\def\@facname{Ingegneria}}{}
+\@ifundefined{@facolta}{\def\@facname{}}{}
 \@ifundefined{@facnumber}{\def\@facnumber{}}{}
-\@ifundefined{@faculty}{\def\@faculty{Facolt\`a di }}{}
+\@ifundefined{@faculty}{\def\@faculty{}}{}
 %
 \@ifundefined{PrimoTomo}{\def\PrimoTomo{Tomo primo}}{}
 \@ifundefined{SecondoTomo}{\def\SecondoTomo{Tomo secondo}}{}
@@ -2234,12 +2256,14 @@ Skipping any redefinition\MessageBreak}%
       \begin{center}
       {\rmfamily\mdseries
       \ifdottorato
-            \large \@phdschool
+            \large \@phdschool\par\medskip
       \else
-            \LARGE\ifx\@facnumber\empty\else\@facnumber\space\fi
-            \@faculty\@facname%
+            \unless\ifx\@faculty\empty
+            	\LARGE\ifx\@facnumber\empty\else\@facnumber\space\fi
+            	\@faculty\@facname\par\medskip
+            \fi%
       \fi
-      \par\medskip}%
+      }%
 %    \end{macrocode}
 % Further specification: it inserts the field of the PhD research or the degree course name;
 % for example it inserts the line ``Philosophy Degree in Applied Tetratricotomy~--~XVI~cycle''
@@ -2539,8 +2563,8 @@ Skipping any redefinition\MessageBreak}%
 %%================================================================
 %%
 \ateneo{Politecnico di Torino}
-\facolta{Ingegneria}
-\FacoltaDi{Facolt\`a di }
+\facolta{}% nessun nome di default
+\FacoltaDi{}% non viene scritta nessuna indicazione per la facoltà
 %%\DottoratoIn{Corso di dottorato in }
 \CorsoDiLaureaIn{Corso di Laurea in }
 \TesiDiLaurea{Tesi di Laurea Magistrale}
@@ -2564,7 +2588,7 @@ Skipping any redefinition\MessageBreak}%
 %    \begin{macrocode}
 \NeedsTeXFormat{LaTeX2e} % lavora solo con LaTeX 2e
 \ProvidesPackage{topcoman}%
-    [2013/01/29 v.5.62a Additional commands for the TOPtesi bundle]
+    [2013/03/08 v.5.70 Additional commands for the TOPtesi bundle]
 %    \end{macrocode}
 % The new command |\DeclareSlantedCapitalGreekLetters| optionally sets the capital
 % Greek letters in math mode with the glyphs taken from the math italic fonts, not from
@@ -2625,16 +2649,25 @@ Skipping any redefinition\MessageBreak}%
 \providecommand{\gradi}{\textormath{\textdegree}{^\circ}}
 %    \end{macrocode}
 %
-% The next set of definitions are used to list a program file. There are better packages to
-% perform this task in the CTAN archives. This set of macros has the advantage that is very
-% short and light on the computer memory; nevertheless it performs its duty pretty well. The
-% font face is the typewriter one; the font size is chosen so as to allow approximately 80
-% characters in the text width of the thesis. It respects the possible indentation tabs (ASCII
-% code 9) by inserting the correct amount of typewriter spaces so as to align every line to
-% the correct boundary which is ``zero modulo eight''. If the program file contains some form
-% feed ASCII characters (ASCII code 12), this \TeX\ code inserts a new page command. The code
-% may appear strange, and it does because it makes heavy use of the dirty tricks of appendix~D 
-% of the \TeX\-book.
+% The next set of definitions are used to list a program file. There are better
+% packages to perform this task in the CTAN archives. This set of macros has the
+% advantage that is very short and light on the computer memory; nevertheless it
+% performs its duty pretty well. The font face is the typewriter one; the font
+% size is chosen so as to allow approximately 80 characters in the text width of
+% the thesis. It respects the possible indentation tabs (ASCII code 9) by
+% inserting the correct amount of typewriter spaces so as to align every line to
+% the correct boundary which is ``zero modulo eight''. If the program file
+% contains some form feed ASCII characters (ASCII code 12), this \TeX\ code
+% inserts a new page command. The code may appear strange, and it does because
+% it makes heavy use of the dirty tricks of appendix~D of the \TeX\-book.
+% for Wahat concern the macro |\obeyspaces| (already defined in the \LaTeXe\ 
+% kernel) we had to change it in order to abolish a conflict with package |ABC|
+% used to typeset music. The latter package is about 15 years younger than
+% |topcoman|, so it should be this latter package duty to avoid conflicts with
+% pre existing packages; on the opposite we accepted the suggestion of Enrico
+% Gregorio, the author of |ABC| whom we thank very much, because his package
+% is much more complicated than this one, so that the conflict is avoided
+% more easily by correcting |topcoman|.
 %    \begin{macrocode}
 \def\listing#1{\par\begingroup
 \programma \input #1 \endgroup}
@@ -2643,6 +2676,7 @@ Skipping any redefinition\MessageBreak}%
 \def\par{\leavevmode\egroup\box0\endgraf}
 \catcode`\`=\active \catcode`\^^I=\active \catcode`\^^L=\active
 \obeylines \uncatcodespecials \obeyspaces
+\begingroup\lccode`~=`\ \lowercase{\endgroup\global\let~}\ %
 \everypar{\startbox}}
 %    \end{macrocode}
 % The above code does the whole work, but the alignment to the tab stops and the
@@ -2653,7 +2687,7 @@ Skipping any redefinition\MessageBreak}%
 \setbox0=\hbox{\ttfamily\footnotesize\space} 
 \tabwidth=8\wd0
 \def\startbox{\setbox0=\hbox\bgroup}
-{\obeyspaces\global\let =\ }
+%{\obeyspaces\global\let =\space}
 {\catcode`\`=\active \gdef`{\relax\lq}}
 {\catcode`\^^I=\active
 \gdef^^I{\leavevmode\egroup \dimen0=\wd0
diff --git a/Master/texmf-dist/tex/latex/toptesi/topcoman.sty b/Master/texmf-dist/tex/latex/toptesi/topcoman.sty
index 78c892824ec..b46e51b3c16 100644
--- a/Master/texmf-dist/tex/latex/toptesi/topcoman.sty
+++ b/Master/texmf-dist/tex/latex/toptesi/topcoman.sty
@@ -29,7 +29,7 @@
 %%   Right brace   \}     Tilde         \~}
 \NeedsTeXFormat{LaTeX2e} % lavora solo con LaTeX 2e
 \ProvidesPackage{topcoman}%
-    [2013/01/29 v.5.62a Additional commands for the TOPtesi bundle]
+    [2013/03/08 v.5.70 Additional commands for the TOPtesi bundle]
 \RequirePackage{ifxetex}
 \ifxetex\else
 \newcommand*\DeclareSlantedCapitalGreekLetters{%
@@ -69,12 +69,12 @@
 \def\par{\leavevmode\egroup\box0\endgraf}
 \catcode`\`=\active \catcode`\^^I=\active \catcode`\^^L=\active
 \obeylines \uncatcodespecials \obeyspaces
+\begingroup\lccode`~=`\ \lowercase{\endgroup\global\let~}\ %
 \everypar{\startbox}}
 \newdimen\tabwidth
 \setbox0=\hbox{\ttfamily\footnotesize\space}
 \tabwidth=8\wd0
 \def\startbox{\setbox0=\hbox\bgroup}
-{\obeyspaces\global\let =\ }
 {\catcode`\`=\active \gdef`{\relax\lq}}
 {\catcode`\^^I=\active
 \gdef^^I{\leavevmode\egroup \dimen0=\wd0
@@ -109,21 +109,23 @@
 %% toptesi.cls, toptesi.sty, topfront.sty, topcommand.sty,
 %% toptesi.cfg, and the English documentation toptesi.pdf.
 %% 
-%% Furthermore the bundle contains the documentation source file toptesi-doc-xetex.tex
-%% and the derived file toptesi-doc-xetex.pdf.
+%% Furthermore the bundle contains the documentation source
+%% file toptesi-doc-xetex.tex and the derived file
+%% toptesi-doc-xetex.pdf.
 %% 
-%% The toptesi-example.tex source file is just an example that shows how
-%% to use the various commands; by commenting or uncommenting certain
-%% source lines it is possible to typeset different kind of theses and their
-%% frontpages.
+%% The toptesi-example.tex source file is just an example
+%% that shows how to use the various commands; by commenting
+%% or uncommenting certain source lines it is possible to
+%% typeset different kind of theses and their frontpages.
 %% 
-%% The toptesi.cfg file is a sample of a local configuration file that can be
-%% freely edited and modified.
+%% The toptesi.cfg file is a sample of a local configuration
+%% file that can be freely edited and modified.
 %% 
-%% By running pdflatex on toptesi.dtx the user gets the class, sty and cfg files
-%% and the English documentation file in pdf format.
+%% By running pdflatex on toptesi.dtx the user gets the class,
+%% sty and cfg files and the English documentation file in
+%%  pdf format.
 %% 
-%% The documentation file toptesi-doc-xetex.pdf is in Italian; its source file is
-%% another example of how to use toptesi.
+%% The documentation file toptesi-doc-xetex.pdf is in Italian;
+%% its source file is another example of how to use toptesi.
 %%
 %% End of file `topcoman.sty'.
diff --git a/Master/texmf-dist/tex/latex/toptesi/topfront.sty b/Master/texmf-dist/tex/latex/toptesi/topfront.sty
index 97c9d520e3f..6ff037ba9ec 100644
--- a/Master/texmf-dist/tex/latex/toptesi/topfront.sty
+++ b/Master/texmf-dist/tex/latex/toptesi/topfront.sty
@@ -28,7 +28,7 @@
 %%   Grave accent  \`     Left brace    \{     Vertical bar  \|
 %%   Right brace   \}     Tilde         \~}
 \NeedsTeXFormat{LaTeX2e}
-\ProvidesPackage{topfront}[2013/01/29 v.5.62a Title page for TOPtesi]
+\ProvidesPackage{topfront}[2013/03/08 v.5.70 Title page for TOPtesi]
 \newif\iffemminile
 \newif\ifdottorato \dottoratofalse
 \newif\iflaureatriennale \laureatriennalefalse
@@ -99,6 +99,7 @@
 \def\ateneo#1{\gdef\@ateneo{\expandafter\uppercase{\expandafter #1}}}
 \def\nomeateneo#1{\gdef\@nomeat{\expandafter\uppercase{\expandafter #1}}}
 \newcommand\facolta[2][]{\gdef\@facname{#2}\gdef\@facnumber{#1}}
+\let\struttura\facolta
 
 \newlength{\TPT@logospace}\TPT@logospace=3em\relax
 \newsavebox{\TPT@logobox}
@@ -125,6 +126,7 @@
 \newcommand\retrofrontespizio[1]{\long\gdef\@retrofrontespizio{#1}}
 \RequirePackage{etoolbox}
 \newcommand\FacoltaDi[1]{\gdef\@faculty{#1}}
+\let\StrutturaDidattica\FacoltaDi
 \newcommand\DottoratoIn[1]{\gdef\@PhDname{#1}}
 \newcommand\CorsoDiLaureaIn[1]{\gdef\@laureaname{#1}}
 \newcommand\TesiDiLaurea[1]{\gdef\@TesiDiLaurea{#1}}
@@ -175,9 +177,9 @@
 \@ifundefined{@ciclo}{\def\@ciclo{}}{}
 \@ifundefined{@ateneo}{\def\@ateneo{POLITECNICO DI TORINO}}{}
 \@ifundefined{@nomeat}{\def\@nomeat{}}{}% Nome proprio dell'ateneo
-\@ifundefined{@facolta}{\def\@facname{Ingegneria}}{}
+\@ifundefined{@facolta}{\def\@facname{}}{}
 \@ifundefined{@facnumber}{\def\@facnumber{}}{}
-\@ifundefined{@faculty}{\def\@faculty{Facolt\`a di }}{}
+\@ifundefined{@faculty}{\def\@faculty{}}{}
 \@ifundefined{PrimoTomo}{\def\PrimoTomo{Tomo primo}}{}
 \@ifundefined{SecondoTomo}{\def\SecondoTomo{Tomo secondo}}{}
 \@ifundefined{TerzoTomo}{\def\TerzoTomo{Tomo terzo}}{}
@@ -226,12 +228,14 @@
       \begin{center}
       {\rmfamily\mdseries
       \ifdottorato
-            \large \@phdschool
+            \large \@phdschool\par\medskip
       \else
-            \LARGE\ifx\@facnumber\empty\else\@facnumber\space\fi
-            \@faculty\@facname%
+            \unless\ifx\@faculty\empty
+             \LARGE\ifx\@facnumber\empty\else\@facnumber\space\fi
+             \@faculty\@facname\par\medskip
+            \fi%
       \fi
-      \par\medskip}%
+      }%
       \ifx\@corso\empty \else{\large
             \ifdottorato
                   \@PhDname\@corso\ifx\@ciclo\empty\else~--~\@ciclo\fi
@@ -423,21 +427,23 @@
 %% toptesi.cls, toptesi.sty, topfront.sty, topcommand.sty,
 %% toptesi.cfg, and the English documentation toptesi.pdf.
 %% 
-%% Furthermore the bundle contains the documentation source file toptesi-doc-xetex.tex
-%% and the derived file toptesi-doc-xetex.pdf.
+%% Furthermore the bundle contains the documentation source
+%% file toptesi-doc-xetex.tex and the derived file
+%% toptesi-doc-xetex.pdf.
 %% 
-%% The toptesi-example.tex source file is just an example that shows how
-%% to use the various commands; by commenting or uncommenting certain
-%% source lines it is possible to typeset different kind of theses and their
-%% frontpages.
+%% The toptesi-example.tex source file is just an example
+%% that shows how to use the various commands; by commenting
+%% or uncommenting certain source lines it is possible to
+%% typeset different kind of theses and their frontpages.
 %% 
-%% The toptesi.cfg file is a sample of a local configuration file that can be
-%% freely edited and modified.
+%% The toptesi.cfg file is a sample of a local configuration
+%% file that can be freely edited and modified.
 %% 
-%% By running pdflatex on toptesi.dtx the user gets the class, sty and cfg files
-%% and the English documentation file in pdf format.
+%% By running pdflatex on toptesi.dtx the user gets the class,
+%% sty and cfg files and the English documentation file in
+%%  pdf format.
 %% 
-%% The documentation file toptesi-doc-xetex.pdf is in Italian; its source file is
-%% another example of how to use toptesi.
+%% The documentation file toptesi-doc-xetex.pdf is in Italian;
+%% its source file is another example of how to use toptesi.
 %%
 %% End of file `topfront.sty'.
diff --git a/Master/texmf-dist/tex/latex/toptesi/toptesi.cfg b/Master/texmf-dist/tex/latex/toptesi/toptesi.cfg
index b1b6bd39cba..6b1365f372a 100644
--- a/Master/texmf-dist/tex/latex/toptesi/toptesi.cfg
+++ b/Master/texmf-dist/tex/latex/toptesi/toptesi.cfg
@@ -44,8 +44,8 @@
 %%================================================================
 %%
 \ateneo{Politecnico di Torino}
-\facolta{Ingegneria}
-\FacoltaDi{Facolt\`a di }
+\facolta{}% nessun nome di default
+\FacoltaDi{}% non viene scritta nessuna indicazione per la facoltà
 %%\DottoratoIn{Corso di dottorato in }
 \CorsoDiLaureaIn{Corso di Laurea in }
 \TesiDiLaurea{Tesi di Laurea Magistrale}
@@ -70,21 +70,23 @@
 %% toptesi.cls, toptesi.sty, topfront.sty, topcommand.sty,
 %% toptesi.cfg, and the English documentation toptesi.pdf.
 %% 
-%% Furthermore the bundle contains the documentation source file toptesi-doc-xetex.tex
-%% and the derived file toptesi-doc-xetex.pdf.
+%% Furthermore the bundle contains the documentation source
+%% file toptesi-doc-xetex.tex and the derived file
+%% toptesi-doc-xetex.pdf.
 %% 
-%% The toptesi-example.tex source file is just an example that shows how
-%% to use the various commands; by commenting or uncommenting certain
-%% source lines it is possible to typeset different kind of theses and their
-%% frontpages.
+%% The toptesi-example.tex source file is just an example
+%% that shows how to use the various commands; by commenting
+%% or uncommenting certain source lines it is possible to
+%% typeset different kind of theses and their frontpages.
 %% 
-%% The toptesi.cfg file is a sample of a local configuration file that can be
-%% freely edited and modified.
+%% The toptesi.cfg file is a sample of a local configuration
+%% file that can be freely edited and modified.
 %% 
-%% By running pdflatex on toptesi.dtx the user gets the class, sty and cfg files
-%% and the English documentation file in pdf format.
+%% By running pdflatex on toptesi.dtx the user gets the class,
+%% sty and cfg files and the English documentation file in
+%%  pdf format.
 %% 
-%% The documentation file toptesi-doc-xetex.pdf is in Italian; its source file is
-%% another example of how to use toptesi.
+%% The documentation file toptesi-doc-xetex.pdf is in Italian;
+%% its source file is another example of how to use toptesi.
 %%
 %% End of file `toptesi.cfg'.
diff --git a/Master/texmf-dist/tex/latex/toptesi/toptesi.cls b/Master/texmf-dist/tex/latex/toptesi/toptesi.cls
index bc326cff2c3..3c701f18b12 100644
--- a/Master/texmf-dist/tex/latex/toptesi/toptesi.cls
+++ b/Master/texmf-dist/tex/latex/toptesi/toptesi.cls
@@ -29,7 +29,7 @@
 %%   Right brace   \}     Tilde         \~}
 \NeedsTeXFormat{LaTeX2e}
 \ProvidesClass{toptesi}%
-[2013/01/29 v.5.62a Class for typesetting university theses]
+[2013/03/08 v.5.70 Class for typesetting university theses]
 \DeclareOption*{\PassOptionsToClass{\CurrentOption}{report}}
 \ProcessOptions\relax
 \LoadClass[a4paper]{report}
@@ -60,21 +60,23 @@
 %% toptesi.cls, toptesi.sty, topfront.sty, topcommand.sty,
 %% toptesi.cfg, and the English documentation toptesi.pdf.
 %% 
-%% Furthermore the bundle contains the documentation source file toptesi-doc-xetex.tex
-%% and the derived file toptesi-doc-xetex.pdf.
+%% Furthermore the bundle contains the documentation source
+%% file toptesi-doc-xetex.tex and the derived file
+%% toptesi-doc-xetex.pdf.
 %% 
-%% The toptesi-example.tex source file is just an example that shows how
-%% to use the various commands; by commenting or uncommenting certain
-%% source lines it is possible to typeset different kind of theses and their
-%% frontpages.
+%% The toptesi-example.tex source file is just an example
+%% that shows how to use the various commands; by commenting
+%% or uncommenting certain source lines it is possible to
+%% typeset different kind of theses and their frontpages.
 %% 
-%% The toptesi.cfg file is a sample of a local configuration file that can be
-%% freely edited and modified.
+%% The toptesi.cfg file is a sample of a local configuration
+%% file that can be freely edited and modified.
 %% 
-%% By running pdflatex on toptesi.dtx the user gets the class, sty and cfg files
-%% and the English documentation file in pdf format.
+%% By running pdflatex on toptesi.dtx the user gets the class,
+%% sty and cfg files and the English documentation file in
+%%  pdf format.
 %% 
-%% The documentation file toptesi-doc-xetex.pdf is in Italian; its source file is
-%% another example of how to use toptesi.
+%% The documentation file toptesi-doc-xetex.pdf is in Italian;
+%% its source file is another example of how to use toptesi.
 %%
 %% End of file `toptesi.cls'.
diff --git a/Master/texmf-dist/tex/latex/toptesi/toptesi.sty b/Master/texmf-dist/tex/latex/toptesi/toptesi.sty
index 01cdac30328..e82ff466279 100644
--- a/Master/texmf-dist/tex/latex/toptesi/toptesi.sty
+++ b/Master/texmf-dist/tex/latex/toptesi/toptesi.sty
@@ -29,7 +29,7 @@
 %%   Right brace   \}     Tilde         \~}
 \NeedsTeXFormat{LaTeX2e}
 \ProvidesPackage{toptesi}%
-[2013/01/29 v.5.62a Extension for toptesi.cls]%
+[2013/03/08 v.5.70 Extension for toptesi.cls]%
 \def\TRON{\tracingcommands \tw@ \tracingmacros \tw@}
 \def\TROFF{\tracingcommands\z@ \tracingmacros \z@}
 \let\TROF\TROFF
@@ -521,21 +521,23 @@ Skipping any redefinition\MessageBreak}%
 %% toptesi.cls, toptesi.sty, topfront.sty, topcommand.sty,
 %% toptesi.cfg, and the English documentation toptesi.pdf.
 %% 
-%% Furthermore the bundle contains the documentation source file toptesi-doc-xetex.tex
-%% and the derived file toptesi-doc-xetex.pdf.
+%% Furthermore the bundle contains the documentation source
+%% file toptesi-doc-xetex.tex and the derived file
+%% toptesi-doc-xetex.pdf.
 %% 
-%% The toptesi-example.tex source file is just an example that shows how
-%% to use the various commands; by commenting or uncommenting certain
-%% source lines it is possible to typeset different kind of theses and their
-%% frontpages.
+%% The toptesi-example.tex source file is just an example
+%% that shows how to use the various commands; by commenting
+%% or uncommenting certain source lines it is possible to
+%% typeset different kind of theses and their frontpages.
 %% 
-%% The toptesi.cfg file is a sample of a local configuration file that can be
-%% freely edited and modified.
+%% The toptesi.cfg file is a sample of a local configuration
+%% file that can be freely edited and modified.
 %% 
-%% By running pdflatex on toptesi.dtx the user gets the class, sty and cfg files
-%% and the English documentation file in pdf format.
+%% By running pdflatex on toptesi.dtx the user gets the class,
+%% sty and cfg files and the English documentation file in
+%%  pdf format.
 %% 
-%% The documentation file toptesi-doc-xetex.pdf is in Italian; its source file is
-%% another example of how to use toptesi.
+%% The documentation file toptesi-doc-xetex.pdf is in Italian;
+%% its source file is another example of how to use toptesi.
 %%
 %% End of file `toptesi.sty'.