new generic package texapi (17jun10)

git-svn-id: svn://tug.org/texlive/trunk@19035 c570f23f-e606-0410-a88d-b1316a301751

8 files changed, 2791 insertions, 2 deletions

diff --git a/Master/texmf-dist/doc/generic/texapi/README b/Master/texmf-dist/doc/generic/texapi/README
new file mode 100644
index 00000000000..83581ee38ba
--- /dev/null
+++ b/Master/texmf-dist/doc/generic/texapi/README
@@ -0,0 +1,23 @@
+This is the README file for the texapi package.
+Author: Paul Isambert.
+E-mail: zappathustra AT free DOT fr
+Comments and suggestions are welcome.
+Date: June 2010.
+
+The package is set of macros to write
+format-independent (and -aware) packages.
+It is, of course, format-independent,
+and requires e-TeX.
+Relevant information can be found in texapi-doc.pdf
+
+Files in this distributions:
+
+texapi.tex     => The package (no wrapper files for format, of course).
+texapi-doc.tex => The source of the documentation.
+texapi-doc.pdf => The typeset documentation.
+
+To process the documentation source, you need the 
+piTeX files (available on CTAN) on top of plain TeX
+with LuaTeX at least v.0.6. Non-free fonts are used.
+
+Licensing of this package is covered by LPPL.
\ No newline at end of file
diff --git a/Master/texmf-dist/doc/generic/texapi/texapi-doc.pdf b/Master/texmf-dist/doc/generic/texapi/texapi-doc.pdf
new file mode 100644
index 00000000000..f0ca5546c18
--- /dev/null
+++ b/Master/texmf-dist/doc/generic/texapi/texapi-doc.pdf
diff --git a/Master/texmf-dist/doc/generic/texapi/texapi-doc.tex b/Master/texmf-dist/doc/generic/texapi/texapi-doc.tex
new file mode 100644
index 00000000000..b50b850f928
--- /dev/null
+++ b/Master/texmf-dist/doc/generic/texapi/texapi-doc.tex
@@ -0,0 +1,1865 @@
+\input pitex % which \input's texapi (and YaX)
+
+\directlua{
+  fonts.expansions.setups['threepercent'].shrink  = 4
+  fonts.expansions.setups['threepercent'].stretch = 4
+  }
+
+\setparameter document:
+  author   = "Paul Isambert"
+  title    = \texapi
+  pdftitle = TeXapi
+  version  = 1.0 % hopefully...
+  date     = "\the\month/\the\day/\the\year"
+  subject  = "The TeXapi documentation."
+  display  = outlines
+
+\setparameter page:
+  pagewidth    = 32cm
+  pageheight   = 30cm
+  lines        = 45
+  hsize        = 10cm
+  baselineskip = 14pt
+  left         = 10cm
+  top          = 5cm
+  parindent    = 2em
+
+\setparameter font:
+  command = \titlefont
+  name    = ChaparralPro-
+  size    = 20pt
+  roman   = Regular
+
+\setparameter font:
+  command = \tmainfont
+  name    = ChaparralPro-
+  size    = 12pt
+  roman   = Regular
+  bold    = Bold
+  italic  = Italic
+
+\setparameter font:
+  command = \csmainfont
+  name    = ChaparralPro-
+  size    = 11pt
+  roman   = Italic
+  bold    = Bold
+  italic  = Regular
+
+\def\mainfont{%
+  \ifcslist \csmainfont
+  \else \tmainfont \fi}
+
+\setparameter font:
+  command = \tcodefont
+  name    = ltype
+  size    = 9.5pt
+  type    = ttf
+  roman   = {}
+  bold    = b
+  italic  = o
+
+\setparameter font:
+  command = \cscodefont
+  name    = ltype
+  size    = 8.5pt
+  type    = ttf
+  roman   = {}
+  bold    = b
+  italic  = o
+  
+\def\codefont{%
+  \ifcslist \cscodefont
+  \else \tcodefont\fi}
+\def\tcode#1{{\codefont#1}}%
+
+% 
+%
+% OUTPUT
+%
+\newbox\codebox
+\newdimen\sepdim
+\sepdim=1.2pc
+
+\output={%
+  \setbox255=\vtop{\unvbox255}
+  \setbox\codebox=\vtop{\unvbox\codebox}
+  \ht255=\baselineskip
+  \ht\codebox=\baselineskip
+  \unless\ifx\bookmarktitle\prevbookmarktitle
+    {\def\TeX{TeX}\pdfoutline goto num \count0 {\bookmarktitle}}
+  \fi
+  \global\let\prevbookmarktitle\bookmarktitle
+  \shipout\vbox{%
+    \vbox to 0pt{%
+      \vss
+      \kern-20pt\hbox{\kern-120pt \pdfdest num \count0 xyz}\kern20pt
+      \hbox to \hsize{%
+        \spaceskip .8em plus .6em minus .3em
+        \titlefont\sc\descriptiontitle}
+      \kern2\baselineskip}%
+    \hbox{%
+      \box255
+      \kern\sepdim
+      \pdfliteral{
+        q
+        .95 g
+        -3 200 300 -1000 re f
+        Q
+      }
+      \box\codebox
+      }%
+    }
+  \advancepageno
+  }
+
+%
+%
+% \cslist
+
+\def\red{\color{.9 0 0}}
+\def\rcom#1{\red{\com#1}}
+\newbox\cslistbox
+\newife\ifexpcs
+\newif\ifcslist
+\newbox\tempbox
+\newdimen\tempdimen
+\newdimen\cswidth
+\newcount\cslistcount
+\def\zilch{\zilch}
+\extraboxspace=1.5pt
+\def\macrobox{\colorbox{.92 .92 .92}}
+\def\definecs#1#2{
+  \quitvmode
+  \hbox  to\cswidth{\iffexpcs\macrobox{\unless\ifx#1\zilch\rcom#1\fi}\hfill}%
+  \setcatcodes{/=13}%
+  \scantextokens{#2}%
+  \restorecatcodes
+  }
+\def\longdefinecs#1#2\end{\definecs#1{#2}}
+\def\getwidth#1#2\end{%
+  \bgroup
+    \setbox0=\hbox{\codefont\string#1}%
+    \ifdim\wd0>\cswidth
+      \global\cswidth=\wd0
+    \fi
+  \egroup
+  }
+\def\cslist#1{%
+  \vskip\baselineskip
+  \cslisttrue \cslistcount=0
+  \cswidth=0pt
+  \dofornoempty{#1,}##1,{%
+    \deftrim\temp{##1}%
+    \passexpanded{\iffprefix!}{\temp}
+             {\passexpanded{\removeprefixin!}{\temp}\temp}%
+    \expandafter\getwidth\temp\end
+    }{}%
+%
+  \tempdimen=0pt
+  \dofornoempty{#1,}##1,{%
+    \advance\cslistcount1
+    \deftrim\temp{##1}%
+    \passexpanded{\ifprefix!}{\temp}
+             {\expcstrue\passexpanded{\removeprefixin!}{\temp}\temp}
+             {\expcsfalse}%
+    \setbox\tempbox\hbox{\expandafter\longdefinecs\temp\end\kern\sepdim}%
+    \ifdim\wd\tempbox>\tempdimen
+      \tempdimen=\wd\tempbox
+    \fi
+    }{}%
+%
+  \setbox\cslistbox=\vtop{%
+    \dofornoempty{#1,}##1,{%
+      \deftrim\temp{##1}%
+      \passexpanded{\ifprefix!}{\temp}
+               {\expcstrue\passexpanded{\removeprefixin!}{\temp}\temp}
+               {\expcsfalse}%
+      \llap{\hbox to\tempdimen{\expandafter\longdefinecs\temp\end\hfil}}%
+      }{}%
+    }%
+  \dp\cslistbox=0pt
+  \noindent \box\cslistbox
+  \def\par{%
+    \endgraf
+    \let\par\endgraf
+    \ifnum\prevgraf<\cslistcount
+      \vskip\the\numexpr(\cslistcount-\prevgraf)\baselineskip
+    \fi}%
+  \cslistfalse \ignorespaces
+  }
+%
+\bgroup
+\setcatcodes{/=13}
+\gdef/#1/{\arg{#1}}
+\egroup
+
+\def\true{\arg{true}}
+\def\false{\arg{false}}
+\def\csarg{\arg{csname}}
+\def\comarg{\arg{command}}
+
+
+%
+% EXAMPLES
+%
+
+\def\processexample{%
+  \global\setbox\codebox=\vbox{%
+    \parindent0pt
+    \ifvoid\codebox
+      \quitvmode\vrule height \topskip depth 0pt width 0pt
+    \else
+      \dimen0=\dp\codebox
+      \box\codebox
+      \vskip\baselineskip
+      \color{1 1 1}{\hrule width \hsize height 1pt depth 1pt}%
+      \kern-2pt
+      \vskip\baselineskip
+      \prevdepth=\dimen0
+    \fi
+    \let\exampleskip\relax
+    \cslisttrue \codefont
+    \typesetexample
+    \vskip\baselineskip
+    \mainfont
+    \doexample
+    }%
+  }
+
+\newblock\description
+  {\getdescriptiontitle}
+  {\penalty-10000\relax}
+
+\def\getdescriptiontitle#1{%
+  \def\bookmarktitle{#1}%
+  \def\descriptiontitle{}%
+  \dofor{#1 }##1 {%
+    \dofor{##1}####1{%
+      \addright\descriptiontitle{\lowercase{####1}\hskip0pt plus 8pt minus 2pt}%
+      }{}%
+    \addright\descriptiontitle{\unskip\spacecs}%
+    }{}%
+  \addright\descriptiontitle{\unskip}%
+  }
+\def\texapi{%
+  {\codefont texapi}%
+  \antigobblespace
+  }
+
+
+\mainfont
+
+
+
+\description{Writing macros with texapi}
+
+\setbox\codebox=\vbox to \hsize{%
+  \csmainfont
+  \hfill \vrule height\topskip width0pt Author: \usevalue document : author \par
+  \hfill Version: \usevalue document : version \par
+  \hfill Date: \usevalue document : date \par
+  \vskip\baselineskip
+  \noindent Typeset in Chaparral Pro (Carol Twombly)
+  and Lucida Sans Typewriter (Charles Bigelow and Kris Holmes)
+  with Lua\TeX\ v.\the\luatexversion.\luatexrevision.
+
+  }
+
+The first motivation for this set of macros is selfish:
+after rewriting the same lines over and over and wasting
+so many excruciating (yes!) hours debugging intricate loops
+with one typo, I decided I could use a toolkit containing
+the painful code without errors (hopefully) and use it
+for future packages.
+
+The second motivation is more ambitious: I think it's a pity
+so many packages are written for one format and are thus
+unusable outside it, even though those packages could be useful
+to anybody. This is so, I believe, because a format mixes two
+different things: decisions about typesetting (mainly) and utility macros.
+The former are the essence of a format, whereas the latter are just
+shorthands you can use or not, replace, or ignore completely.
+But the fact is that users of a format tend to use the utility macros
+shipped with it, and thus writes macros that can't be reused elsewhere,
+even though nothing crucial hinges on what utility macros one uses.
+Thus, \texapi aims at providing a good deal of this kind of macros
+whitout relying on any particular format, so that one can write
+code without having to take into account how it will be used.
+Moreover, \texapi is also format-aware, meaning some commands
+are defined differently depending on the format being used,
+and one doesn't have to create as many macros as there are formats.
+
+There is at least one basic assumptions, namely that formats
+should contain plain \TeX's allocation macros. This the case for
+all formats I know.
+
+\vskip\baselineskip
+In what follows, commands have a \macrobox{grey background} when they
+are fully expandable, e.g. they can be used inside \com\csname...\com\endcsname,
+provided you don't use them with unexpandable arguments, of course.
+On the other hand, all unexpandable commands are protected.
+
+Arguments are denoted by \arg{text}, where `text' makes the intended use
+clearer and doesn't denote any particular type of argument, except in
+the case of \comarg, which denotes a control sequence (something expandable,
+actually), and \csarg, which denotes an argument suitable to \com\csname.
+Braces are indicated only when mandatory, but of course they can be used to delimit
+arguments as usual.
+
+\description/
+
+
+
+\description{Engine and format detection}
+
+\cslist{
+  \texenginenumber
+  }
+This is a \com\chardef'ined number set according to the
+engine used: 0 means e-\TeX, or an unknown engine with
+e-\TeX\ extensions; 1 means Xe\TeX\ (detected because
+\com\XeTeXinterchartoks exists); 2 means pdf\TeX\ (detected
+thanks to \com\pdfstrcmp); 3 means Lua\TeX\ (detected thanks
+to \com\directlua). Numbering here allows one to detect a
+pdf\TeX-based engine with \com\texenginenumber>1. Con\TeX t
+has an equivalent \com\texengine, with pdf\TeX=1 and Xe\TeX=2,
+though.
+
+\cslist{
+  \formatnumber
+  }
+This number does the same with formats. Here, 0 means an unknown
+format, 1 means plain (because \com\fmtname is `\tcode{plain}'),
+2 means eplain (because \com\fmtname is `\tcode{eplain}'),
+3 means Con\TeX t (because there exists an \com\inspectnextoptionalcharacter
+command), 4 means La\TeX2e (because \com\fmtname is `\tcode{LaTeX2e}')
+and 5 means La\TeX3 (because there exists an \com\ExplSyntaxOn command).
+There's no distinction yet between La\TeX3 on top of La\TeX2e and La\TeX3
+as a format per se. Since \com\formatnumber is set only if it doesn't
+already exist, you can write your package with, say, \tcode{code.tex}
+containing the main code and \tcode{code.sty} and \tcode{t-code.tex}
+as wrapper files for La\TeX\ and Con\TeX t respectively, with \com\formatnumber
+already set accordingly.
+
+\Example
+\def\myengine{%
+  \ifcase\texenginenumber
+    e-\or Xe\or pdf\or Lua\fi\TeX 
+  }
+\def\myformat{%
+  \ifcase\formatnumber
+    unknown\or plain\or eplain\or
+    ConTeXt\or LaTeX\or LaTeX3\fi
+  }
+This documentation has been typeset
+with \myformat\ under \myengine.
+\Example/
+
+\cslist{
+  \priminput,
+  \primunexpanded
+  }
+Both La\TeX\ and Con\TeX t redefines \com\input, and in Con\TeX t
+\com\unexpanded has not the meaning of the e-\TeX\ primitive. These
+two commands are thus the primitive \com\input and \com\unexpanded
+respectively.
+
+\cslist{
+  \loadmacrofile/file/
+  }
+The behavior of this command depends on \com\formatnumber. The \arg{file}
+should be given without extension, and the following happens: in Con\TeX t,
+\com\usemodule\tcode{[\arg{file}]} is executed, in La\TeX\ \com\RequirePackage\barg{file}
+is used, and in other formats it is simply \com\input\arg{file}\tcode{.tex}.
+This makes sense only with packages that are distributed as described above,
+i.e. with the main code in one file and wrapper files for La\TeX\ and Con\TeX t,
+like Ti\ital{k}Z or \ital{librarian}.
+
+\cslist{
+  \senderror/package//message/
+  }
+This sends an error message according to the format's custom. In \tcode{plain}
+and \tcode{eplain} (and in an unknown format), it produces
+\tcode{\com\errmessage\string{\arg{package} error: \arg{message}\string}}.
+In La\TeX, we get \com\PackageError\barg{package}\barg{message}{\codefont\string{\string}}
+(no help message) and in Con\TeX t
+\tcode{\com\writestatus\string{\arg{package} error\string}}\barg{message}
+(which is far from Con\TeX t's sophisticated communication system but, well...).
+
+\description/
+
+
+
+
+
+
+
+\description{Argument manipulation}
+
+\cslist{
+  !\emptycs,
+  !\spacecs,
+  \spacechar
+  }
+Pretty useful macros whose meaning is clear, but whatever: \com\emptycs is
+an emptily defined command, \com\spacecs expands to a space, and \com\spacechar
+denotes a space, i.e. it is an implicit space and not really a macro.
+
+\cslist{
+  !\gobbleone,
+  !\gobbleoneand/code/
+  }
+Those, as you might imagine, gobble the following argument; the second version
+also excutes \arg{code} afterwards. There are actually nine
+such commands in each case, and they are (for the sake of completeness)
+\com\gobbleone, \com\gobbletwo, \com\gobblethree, \com\gobblefour,
+\com\gobblefive, \com\gobblesix, \com\gobbleseven, \com\gobbleeight\
+(watch out, two \ital{e}'s) and \com\gobblenine for the first version,
+and \com\gobbleoneand, \com\gobbletwoand, \com\gobblethreeand,
+\com\gobblefourand, \com\gobblefiveand, \com\gobblesixand,
+\com\gobblesevenand, \com\gobbleeightand and \com\gobblenineand. Note
+that \com\gobblenineand\arg{code} takes two expansion steps to
+return \arg{code}, instead of only one in the other cases.
+
+\Example
+This is \gobbletwoand{very } uninteresting.
+\Example/
+
+\cslist{
+  !\unbrace/code/
+  }
+This is the kind of command you probably can't see the point of until
+you need it. It returns its \arg{code} untouched, but with outermost
+braces removed if any.
+
+\cslist{
+  !\swapargs/arg1//arg2/,
+  !\swapbraced/arg1//arg2/,
+  !\swapleftbraced/arg1//arg2/,
+  !\swaprightbraced/arg1//arg2/
+  }
+The first of those returns \arg{arg2}\arg{arg1} into the stream, without
+any brace to delimit them.
+On the contrary, \com\swapbraced returns \barg{arg2}\barg{arg1}. And, as
+you might imagine, \com\swapleftbraced returns
+\barg{arg2}\arg{arg1} whereas \com\swaprightbraced returns \arg{arg2}\barg{arg1}.
+
+\cslist{
+  !\passexpanded/arg1//arg2/,
+  !\passexpandednobraces/arg1//arg2/
+  }
+The first one returns \arg{arg1}\barg{arg2 expanded once} and the second
+\arg{arg1}\arg{arg2 expanded once}. It's some sort
+of long \com\expandafter built on \com\swapargs and associates,
+and if \arg{arg1} is a single token it's faster to use \com\expandafter
+itself. It's not a real \com\expandafter, though, since \arg{arg2} is
+expanded to the left of \arg{arg1} and then moved back to its
+right. Which, with e.g. an \com\else as \arg{arg2}, will lead
+to results you probably haven't foreseen and expected.
+If \arg{arg2} is some material you want to turn into a command with
+\com\csname, see \com\passcs below.
+
+\Example
+\def\foo#1#2{\detokenize{(1=#1,2=#2)}}
+\def\bar{two}
+\foo{one}\bar
+\passexpanded{\foo{one}}\bar
+\Example/
+
+\description/
+
+
+
+
+
+
+
+
+
+\description{Defining \& using commands}
+
+\cslist{
+  \defcs\csarg/parameter text/\barg{definition},
+  \edefcs\csarg/parameter text/\barg{definition},
+  \gdefcs\csarg/parameter text/\barg{definition},
+  \xdefcs\csarg/parameter text/\barg{definition}
+  }
+These work exactly like \com\def, \com\edef, \com\gdef
+and \com\xdef, except they define a command with name
+\csarg. The \arg{parameter text} is the usual one,
+and any the space at the beginning is significant. I.e.
+\verb/\defcs{foo}#1{...}/ and \verb/\defcs{foo} #1{...}/
+aren't equivalent at all. Prefixes can be appended as with
+\com\def.
+
+\Example
+\defcs{foo}#1{This is foo: #1.}
+\foo{bar}
+\Example/
+
+
+\cslist{
+  \letcs\csarg\comarg,
+  \lettocs\comarg\csarg,
+  \letcstocs\csarg\csarg
+  }
+These \com\let the first command or command named \csarg\ to
+the meaning of the second one. In both \com\lettocs and \com\letcstocs,
+if the command with name \csarg\ is undefined, it is not let to \com\relax.
+So these are different from \com\let with \com\expandafter's. The \com\letcs
+command can also be used to create an implicit character, of course.
+
+\Example
+\expandafter\let\expandafter\foo
+                \csname undefined\endcsname
+\lettocs\bar{reallyundefined}
+\letcstocs{reallyundefined}{reallyundefined}
+
+Compare this: \meaning\foo,
+and that: \meaning\bar.
+And better yet: \meaning\reallyundefined.
+\Example/
+
+
+\cslist{
+  \addleft\comarg/material/,
+  \addleftcs\csarg/material/,
+  \eaddleft\comarg/material/,
+  \eaddleftcs\csarg/material/
+  }
+This redefines \comarg\ or a command named \csarg\ to
+itself with \arg{material} added at the beginning. The e-variant
+performs an \com\edef so that \arg{material} is fully expanded
+(but not \comarg). The usual prefixes can be appended.
+
+\cslist{
+  \addright\comarg/material/,
+  \addrightcs\csarg/material/,
+  \eaddright\comarg/material/,
+  \eaddrightcs\csarg/material/
+  }
+This is the same thing as above, but the material is added 
+at the end. In both the left and right version, the command
+thus redefined should be a simple command working by itself
+(i.e. no argument and no delimiter). In the \csarg\ case,
+no check is performed to ensure that \csarg\ is defined
+(but in the worst case it ends up as \com\relax, because of
+its being called after the implicit \com\def\ (get it?)).
+
+\Example
+\defcs{foo}{bar}
+\addleftcs{foo}{In a }
+\addright\foo{ (how fascinating).}
+\foo
+\Example/
+
+\cslist{
+  !\usecs\csarg,
+  !\usecsafter\csarg,
+  !\passcs/code/\csarg,
+  !\passexpandedcs/code/\csarg,
+  \noexpandcs\csarg,
+  \unexpandedcs\csarg
+  }
+Various ways to use a command with name \csarg:
+\com\usecs performs a simple \com\csname\csarg\com\endcsname\
+(and doesn't even check whether \csarg\ is defined or not, so
+this might relax it a little bit), \com\usecsafter does the equivalent
+of \com\expandafter\com\command, \com\passcs puts \csarg\ as a real
+(unbraced) command after \arg{code}, whereas \com\passexpandedcs passes
+the expansion of the control sequence with name \csarg\ to \arg{code}; \com\noexpandcs and \com\unexpandedcs
+return \csarg\ with a \com\noexpand prefix or its expansion as argument to
+\com\unexpanded\ (\com\primunexpanded, really).
+
+\Example
+\def\bar{whatever} \def\foo#1{[#1]}
+I use it: \usecs{bar}, 
+I use it after: \usecsafter{foo}\bar,
+and I pass it: \passcs\foo{bar}.
+\Example/
+\Example
+\def\foo{\bar}
+I don't expand it:
+\edef\foobar{\noexpandcs{foo}}%
+\meaning\foobar.
+Or just a little bit:
+\edef\foobar{\unexpandedcs{foo}}%
+\meaning\foobar.
+\Example/
+
+\cslist{
+  !\commandtoname\comarg
+  }
+This returns the name of \comarg, i.e. \comarg\ without its backslash
+(and made of catcode-12 characters, since it's based on \com\string).
+
+\description/
+
+
+
+
+
+
+
+
+
+\description{Tests with commands}
+
+\cslist{
+  !\reverse
+  }
+Conditionals in \texapi\ (not only those on this page) can
+be prefixed with \com\reverse, so that if they're true the
+\false\ argument is executed (if specified), and if they're
+false, the \true\ argument is executed. So this is equivalent
+to \com\unless.
+
+\cslist{
+  !\ifcommand\comarg\true\false,
+  !\iffcommand\comarg\true
+  }
+This conditional executes \true\ if \comarg\ is defined.
+So it is a straight version of \com\ifdefined. The \com\iff...
+version, like all \texapi's \com\iff..., considers only the
+\true\ case (which becomes the \false\ case if the conditional
+is prefixed with \com\reverse).
+
+\Example
+\ifcommand\TeX{Cool}{Too bad}.
+Nothing: \iffcommand\undefined{Whatever}.
+\Example/
+
+\cslist{
+  !\ifcs\csarg\true\false,
+  !\iffcs\csarg\true
+  }
+Same as above, but with an \com\ifcsname this time.
+It goes without saying that \csarg\ isn't let to \com\relax
+thereafter if it was undefined.
+
+\Example
+\reverse\iffcs{undefined}{This command is undefined.}
+\Example/
+
+\cslist{
+  !\ifemptycommand\comarg\true\false,
+  !\iffemptycommand\comarg\true
+  }
+This is true if \comarg\ is defined with an empty
+definition text, i.e. it is equivalent to \com\emptycs.
+This is not true if \comarg\ takes arguments, though,
+so \com\gobbleone isn't empty in this sense.
+
+\cslist{
+  !\ifemptycs\csarg\true\false,
+  !\iffemptycs\csarg\true
+  }
+Same as above with a command named \csarg.
+
+\Example
+\def\foo{}
+\ifemptycommand\foo{Empty}{Not empty}.
+\reverse\iffemptycs{gobbleone}{It ain't empty}.
+\Example/
+
+
+
+\cslist{
+  !\ifxcs\csarg\comarg\true\false,
+  !\iffxcs\csarg\comarg\true
+  }
+This is true if \csarg\ has the same definition as \comarg,
+or they're both undefined.
+
+\cslist{
+  !\ifxcscs\csarg\csarg\true\false,
+  !\iffxcscs\csarg\csarg\true
+  }
+This is true if both \csarg's have the same definition,
+or they're both undefined.
+
+\Example
+\iffxcs{undefined}\undefinedtoo
+       {Same definitions.}
+\ifxcscs{foo}{TeX}
+        {These are the same}
+        {These are different}.
+\Example/
+
+\description/
+
+
+
+
+
+
+
+
+
+
+\description{Various conditionals}
+
+\cslist{
+  \newife\comarg
+  }
+This defines a conditional like plain \TeX's \verb/\newif/,
+except it takes two arguments (the \true\ and \false\ values)
+instead of an \com\else ... \com\fi structure. Besides,
+this conditional is reversible with \com\reverse, and
+a `double-f\kern1pt' (i.e. \com\iff...) version is also created,
+which takes the \true\ part only. As with
+\verb/\newif/, \comarg\ must begin with \tcode{if}.
+(The \ital{e} means \ital{expandable}, although there's
+nothing more expandable in the conditionals thus constructed
+than in those defined with \verb/\newif/, but anyway.)
+
+\Example
+\newife\iffoo
+\iffoo{There is foo}{There is no foo}.
+\footrue
+\reverse\iffoo{There is no foo}{There is foo}.
+\ifffoo{With three f's in a row}.
+\Example/
+
+\cslist{
+  !\straightenif/\TeX\ conditional//arg/\true\false,
+  !\straighteniff/\TeX\ conditional//arg/\true
+  }
+Apart from \com\ifdefined and \com\ifcsname\ (in the guise
+of \com\ifcommand and \com\ifcs respectively), none of \TeX's
+primitive conditionals are redefined in a straight fashion,
+i.e. with two arguments instead of \com\else ... \com\fi.
+These commands let you use \TeX's conditional in such a way.
+\arg{\TeX\ conditional} means such a primitive without a
+backslash (so this construction can be used inside real
+conditionals), e.g. \tcode{ifnum} or \tcode{ifvoid}.
+The \arg{arg} is whatever you normally feed to this conditional.
+It is brutally concatenated, and you're the one in charge
+of adding space if needed, as for instance with \tcode{ifnum}.
+Chaos will ensue if you fail to do so. With conditionals that don't
+require anything, e.g. \tcode{iftrue} or \tcode{ifvmode},
+leave \arg{arg} empty (but don't forget it).
+Finally, \true\ and \false\ are executed accordingly, and the
+whole macro can be prefixed with \com\reverse.
+
+\Example
+                       % See this space?
+\straightenif{ifnum}{1=1 }{Reality is preserved}
+                          {Bad news}.
+\reverse\straighteniff{if}{ab}
+             {Different letters, obviously.}
+\straightenif{iftrue}{}{Good}{Bad}.
+\Example/
+
+
+
+
+\cslist{
+  !\afterfi/code/,
+  !\afterdummyfi/code/
+  }
+You shouldn't use these. The first one closes the
+current conditional and executes \arg{code}. The second
+one lets go one \com\fi and executes \arg{code}. So these
+are kinds of \com\expandafter's when \arg{code} isn't just
+a command. Anything before the incoming \com\fi is gobbled.
+The reason why you should use one or the other
+should be clear to you, otherwise you'll probably be messing
+with a conditional.
+
+\Example
+\iftrue
+  \afterdummyfi{\afterfi{Here we are.}}
+\else
+  \iffalse
+    Whatever.
+  \fi
+\fi
+\Example/
+
+\description/
+
+
+
+
+
+
+
+
+\description{Poking at what comes next}
+
+\cslist{
+  \nospace/code/
+  }
+This gobbles any incoming space, if any, and executes \arg{code}.
+Of course it doesn't require there to be any space to work properly.
+
+\vskip\baselineskip
+
+All the following conditionals can be prefixed with \com\reverse.
+And in case your head's buzzing, their names are quite regular:
+take an \com\if, \com\ifcat or \com\ifx, add `\tcode{next}', and create
+variants by doubling the \tcode{f} and/or adding \tcode{nospace}
+at the end.
+
+\Example
+\nospace{foo} bar
+\Example/
+
+\cslist{
+  \ifnext/token/\true\false,
+  \iffnext/token/\true,
+  \ifnextnospace/token/\true\false,
+  \iffnextnospace/token/\true
+  }
+These poke at the next token and see whether it
+has the same character code as \arg{token}. In other
+words, an \com\if test is performed between \arg{token}
+and the next token in the input stream. However, neither
+\arg{token} nor the incoming token are expanded, so that
+they can be control sequences and no unwanted expansion 
+will occur. Control sequences are all equal according to
+this test (which can very well take an undefined control
+sequence as \arg{token}). The nospace version must be
+pretty clear: the macro discards all incoming spaces until
+it finds a non-space token to test (unfortunately,
+an implicit space and a space character are undistinguishable
+as far as this test (and the next ones) is concerned, so in
+the very unlikely case where an implicit space was waiting
+in the stream, it'll be gobbled in the nospace variant).
+
+\Example
+Here comes \ifnext e{an }{a }e.
+Here comes \reverse\ifnext e{a }{an }b.
+Here comes
+\iffnextnospace\foo{a control sequence: } \TeX.
+\Example/
+
+\cslist{
+  \ifcatnext/token/\true\false,
+  \iffcatnext/token/\true,
+  \ifcatnextnospace/token/\true\false,
+  \iffcatnextnospace/token/\true
+  }
+These are the same as above with an \com\ifcat test
+instead of \com\if. Again, control sequences aren't expanded
+and they all have the same category code.
+
+\Example
+\def\tex{\TeX\iffcatnext a{ }}
+A \tex is a \tex is a \tex.
+\Example/
+
+\cslist{
+  \ifxnext/token/\true\false,
+  \iffxnext/token/\true,
+  \ifxnextnospace/token/\true\false,
+  \iffxnextnospace/token/\true
+  }
+Once again like the previous commands, this time with
+an \com\ifx, i.e. the definitions of control sequences
+are compared, and in case \arg{token} and/or the next
+token are unexpandable thing, both character code and
+category code are compared. So these are performing 
+real \com\ifx tests.
+
+\Example
+\def\foo{not \string\TeX}
+\reverse\iffxnextnospace\TeX
+  {The incoming command isn't \string\TeX: } \foo.
+\Example/
+
+\description/
+
+
+
+
+
+
+\description{String manipulation}
+
+\cslist{
+  !\ifstring/string1//string2/\true\false,
+  !\iffstring/string1//string2/\true
+  }
+These return \true\ if the two strings are identical.
+Category codes aren't taken into account when strings
+are compared.
+
+\Example
+Two \ifstring{abc}{abc}{equal}{unequal} strings
+and an \reverse\iffemptystring{something}{unempty} one.
+\Example/
+
+
+\cslist{
+  !\ifemptystring/string/\true\false,
+  !\iffemptystring/string/\true
+  }
+These return \true\ if \arg{string} is empty.
+
+
+
+
+\cslist{
+  \newstring/string/
+  }
+The following operations (\com\ifprefix, \com\removesuffix, etc.)
+aren't fully expandable by default. However, if a string has been
+previously declared with \com\newstring, they magically become
+fully expandable.
+
+So, in what follows, macros aren't marked as expandable, although
+they can be if the preceding condition is fulfilled. Besides, these
+macro aren't \com\protected even though their default behavior would
+require that they be. But you can always append a \com\noexpand to
+an unprotected command, whereas you cannot force the execution of a
+protected one. (This protecting issue is of course totally irrelevant
+for the \com\removeprefixin and \com\removesuffixin commands, which aren't
+expandable by definition and are thus protected.)
+
+
+
+
+\cslist{
+  \ifprefix/prefix//string/\true\false,
+  \iffprefix/prefix//string/\true
+  }
+This test is true if \arg{string} begins with \arg{prefix}.
+Category codes do matter. 
+
+\Example
+\newstring{abc}
+\edef\foo{\ifprefix{abc}{abcd}{True}{False}.}
+\edef\bar{\reverse\iffsuffix{abc}{whatever}{No suffix}.}
+\edef\foobar{\ifcontains{abc}{gee}{Yes}{No}.}
+\meaning\foo\par
+\meaning\bar\par
+\meaning\foobar
+\Example/
+
+\cslist{
+  \ifsuffix/suffix//string/\true\false,
+  \iffsuffix/suffix//string/\true
+  }
+True if \arg{string} ends with \arg{suffix}.
+
+\cslist{
+  \ifcontains/string1//string2/\true\false,
+  \iffcontains/string1//string2/\true
+  }
+Finally, this is true if \arg{string2} contains \arg{string1}.
+
+
+\cslist{
+  \removeprefix/prefix//string/,
+  \removesuffix/suffix//string/
+  }
+These return \arg{string} without \arg{prefix} (resp.
+\arg{suffix}). No test is performed to check that
+\arg{string} indeed begins (resp. ends) with \arg{prefix}
+(resp \arg{suffix}), so these macros make sense only after
+the adequate tests.
+
+\cslist{
+  \removeprefixand/prefix//string//code/,
+  \removesuffixand/suffix//string//code/
+  }
+These do the same as the previous one, but feed the
+resulting string to \arg{code}, between braces. Once again,
+no test is performed beforehand.
+
+\cslist{
+  \removeprefixin/prefix//string/\comarg,
+  \removesuffixin/suffix//string/\comarg
+  }
+These define \comarg\ as \arg{string} without \arg{prefix}
+(resp. \arg{suffix}). No test either. Sorry.
+
+\cslist{
+  \splitstring/string1//string2//code/
+  }
+This cuts \arg{string2} in two at \arg{string1}'s first occurrence 
+and passes the two parts as braced arguments to \arg{code}. And,
+again: no test.
+
+\Example
+\def\record#1 : #2.{%
+  \par\bgroup
+    \it\ifprefix*{#1}{\removeprefix*{#1} [live]}{#1}
+  \egroup
+  (\ifcontains/{#2}{\splitstring/{#2}{\dodate}}{#2})
+  }
+\def\dodate#1#2{recorded #1, released #2}
+
+A somewhat incomplete list of fantastic
+records by Frank Zappa:
+\record Absolutely Free : 1967.
+\record The Grand Wazoo : 1972.
+\record L\"ather : 1977/1996.
+\record *Make a Jazz Noise Here : 1988/1991.
+\Example/
+
+\description/
+
+
+
+
+
+
+\description{Various things on the same page}
+
+\cslist{
+  \setcatcodes\barg{list}
+  }
+The \arg{list} argument here means comma separated
+\arg{characters}\verb/=/\arg{category code}, with
+an \ital{s} to \ital{characters} because you can
+concatenate them if you want them to share the same
+\arg{category code}. So, as you might have guessed,
+this set all \arg{characters} to characters with
+catcode \arg{category code}. And it also sets 
+\com\restorecatcodes accordingly. The changes are
+local. The \verb/#/ character requires a backslash
+(so do braces and the backslash itself, but that's obvious).
+
+\cslist{
+  \resetcatcodes
+  }
+This restores the catcodes of the characters changed
+with the previous command, which is cumulative, i.e.
+\com\restorecatcodes restores catcodes changed by all preceding
+\com\setcatcodes commands, not only the last one. Since
+changes are local, \com\restorecatcodes may be useless in a group
+(and the effect of \com\restorecatcodes itself is local too).
+
+\Example
+\setcatcodes{\\\#\{\}\%=12,\|=0}
+Hey, were're verbatimizing:
+\def\foo#1{\bar{#1}}%
+|restorecatcodes
+\Example/
+
+\Example
+\bgroup
+And now in a group:\par
+\setcatcodes{z=13}
+\defz{ZZZZZZZZZZZZZZZZZZZZZZZZZZ}
+I'm sleeping: z.\par
+\egroup
+And I'm not: z.
+\Example/
+
+
+
+\vskip\baselineskip
+The trimming macros below are adapted from
+Will Robertson's \tcode{trimspace} package.
+
+
+\cslist{
+  !\trimleft/string/,
+  !\trimright/string/,
+  !\trim/string/
+  }
+These return \arg{string} with one space removed at the beginning
+or end or both. There's no need to check beforehand whether there
+are indeed such spaces.
+
+\Example
++\trim{ bar }+
+\Example/
+
+\cslist{
+  !\passtrimleft/string//code/,
+  !\passtrimright/string//code/,
+  !\passtrim/string//code/
+  }
+These return \arg{string} trimmed of spaces as a braced argument to
+\arg{code}.
+
+\cslist{
+  \deftrimleft\comarg/string/,
+  \deftrimright\comarg/string/,
+  \deftrim\comarg/string/
+  }
+The same thing again, except now those commands define \comarg\
+to \arg{string}, etc.
+
+\Example
+\deftrimleft\foo{ bar }
++\foo+
+\Example/
+
+\description/
+
+
+
+
+
+
+
+\description{While statements}
+
+\cslist{%
+  !\repeatuntil/number//code/
+  }
+This executes \arg{code} \arg{number} times. The \arg{number}
+argument can be a \com\count register, an integer defined with
+\com\chardef, etc., and of course a string of digits. In any case,
+it is really an argument and must be surrounded by braces if it is
+made of more than one token.
+
+\Example
+We have seen \repeatuntil\pageno{I} pages.\par
+\edef\foo{\repeatuntil3{.}}
+\meaning\foo
+\Example/
+
+
+\cslist{
+  !\dowhile/condition//code/
+  }
+This repeats \arg{code} while \arg{condition} is true. The latter
+must be a `straight' \tcode{if}, i.e. either one of \texapi's
+\com\if... or a \com\straightenif\barg{\TeX\ conditional} construction,
+in both cases without the \true\ and \false\ arguments, because \true\ is actually
+\arg{code}, and \false\ would make no sense. Finally, the conditional
+must be a simple \com\if..., not an \com\iff... version. Once again, this
+makes sense: the \ital{if and only if} clause is implicit in a \ital{while}
+statement. If you use an \com\iff..., you'll end up with many empty braces,
+which is harmless unless you're in a context of expansion. You can use \com\reverse
+in \arg{condition}.
+
+\Example
+\newife\ifbreakloop \def\foo{}
+\dowhile{\reverse\ifbreakloop}
+        {\addleft\foo{a}%
+         \passexpanded\iffstring\foo{aaaa}
+                      \breaklooptrue}
+\foo
+\Example/
+
+\Example
+\edef\foo{%
+  The inconvenience of iff...:
+  \dowhile{\straighteniff{ifnum}{4=5 }}
+          {whatever}
+  }
+\meaning\foo
+\Example/
+
+
+
+\cslist{
+  \newwhile\comarg/number//transformations//code/
+  }
+The \com\dowhile macro is not very powerful since
+you must generally change something somewhere to make
+it stops, and thus its expandability is somewhat perfunctory.
+That's why there is \com\newwhile. It creates an expandable \comarg\ which takes
+\arg{number} arguments (up to 9, as usual) and repeats \arg{code}
+indefinetely. So, at first sight, it's bad news. But the point
+is \arg{code} is supposed to launch the \com\breakwhile macro below sooner or
+later, i.e. stop the loop. Besides, on each iteration (barring the first), \arg{transformations}
+are applied to the arguments, and this means: the first argument is
+replaced by the first transformation, the second argument by the second
+transformation, etc. So there must be as many transformations as there
+are arguments, transformations themselves being just code that can
+make reference to the arguments. If you don't want to transform an
+argument, just repeat it in the transformation.
+
+\cslist{
+  !\breakwhile/code/
+  }
+This breaks the current while loop and executes \arg{code}, which can make
+reference to the arguments of the loop.
+
+\cslist{
+  !\changewhile/new arguments/
+  }
+This replaces the default \arg{transformations} defined with \com\newwhile
+and passes the \arg{new arguments} for the next iteration. There
+must be as many arguments as required by the loop. The original
+\arg{transformations} remain in force for the next iterations.
+
+\Example
+                        % Transformations.
+\newwhile\largestsquare2{\numexpr(#1+1)}{#2}{%
+  \reverse\straighteniff{ifnum}{\numexpr(#1*#1)<#2 }
+                     {The largest number whose square
+                      is smaller than #2 is
+                      \breakwhile{\the\numexpr(#1-1).}}}
+\largestsquare{1}{50}\par
+\largestsquare{1}{200}
+\Example/
+
+
+\description/
+
+
+
+
+\description{For statements on the fly}
+
+\cslist{
+  \dofor/list//parameter text/\barg{definition}/coda/
+  }
+This runs \arg{definition} on each occurrence of 
+\arg{parameter text} in \arg{list}. The \arg{parameter text}
+is a real one, hence the braces around \arg{definition}.
+The \arg{coda} is executed if and only if the loop goes
+to its natural end, i.e. it is not terminated by one of
+the commands below. It must be present, even if you don't
+want one (in which case, leave it empty), and it can't make
+any reference to the arguments of the parameter text.
+A loop thus executed is absolutely
+not expandable. You can embed as many loops as you want
+(but don't forget to double the \verb/#/).
+
+\cslist{
+  \dofornoempty
+  }
+This is the same as above, except \arg{definition} is not executed
+when the \ital{first} argument is empty.
+
+
+\cslist{
+  \breakfor/code/
+  }
+This breaks the current loop and executes \arg{code};
+the \arg{coda} of the loop is not executed.
+
+\cslist{
+  \retrieverest/code/
+  }
+This also breaks the loop, but it retrieves the remaining
+arguments in the list and pass them as a braced argument
+to \arg{code}.
+
+\cslist{
+  \pausefor/code/
+  }
+This interrupts the loop and executes \arg{code}; the loop
+being interrupted means you're in the middle of the list, and
+you can process it. Such a pause must be terminated by a
+\com\resumefor if you don't want nasty internal code
+to surface.
+
+\cslist{
+  \resumefor\com\dofor
+  }
+This restarts the current loop. It is necessary to specify
+\com\dofor, because \com\resumefor is more general and is
+used to restart any kind of loop, especially those defined
+with \com\newfor (see next page).
+
+\Example
+\dofor{a,b,c,}#1,{[#1]}{}
+\Example/
+
+\Example
+\dofor{(a=13)(b=3)(c=54)(d=33)(e=22)}(#1=#2){%
+  \straighteniff{ifnum}{#2>50 }
+    {\breakfor{There's a number larger than 50: #1=#2.}}}
+  {No number larger than 50.}
+\Example/
+
+\Example
+\dofornoempty{dd,e,,acb,3,ee4,,,}#1,{%
+  \dofor{#1}##1{[##1]}{}...%
+  }{}
+\Example/
+
+\vskip\baselineskip
+
+The \com\dofor loop does not perform any kind of normalisation
+on the list. I.e. the list must be exactly designed to match
+the parameter text, including spaces and other unwelcome guests.
+
+The \com\dofor macro is useful for straightforward loops used once
+or twice in a document. But for fully fledged total-control
+fully expandable hey-that's-too-cool loops, you should use the
+\com\newfor construction.
+
+
+\description/
+
+
+
+
+
+
+
+
+
+
+
+
+
+\description{For statements: first steps}
+
+\cslist{
+  \newfor\comarg\barg{optional passed arguments},
+  \zilch\kern-4em/parameter text/\barg{definition}[/optional coda/]
+  }
+This creates a recursive \comarg\ that will consume all input
+with structure \arg{parameter text}. Let's forget
+\barg{optional arguments} for a while, since they're optional
+(albeit braced). Let's forget the optional coda as well. So
+it boils down to:
+
+\vskip\baselineskip
+\noindent\com\newfor\comarg\arg{parameter text}\barg{definition}
+\vskip\baselineskip
+
+\noindent so that basically \com\newfor works like \com\def.
+The \arg{parameter text} is a real parameter
+text as with \com\def, just like \barg{definition} is a real
+definition, hence the braces. The only difference is there must
+be at least one argument,  because we need something to loop
+upon. I.e. \arg{parameter text} is at least \verb/#1/.
+
+Now you can launch \comarg\ on an argument which is made of as
+many occurrences of \arg{parameter text} as you wish, and on each
+occurrence \arg{definition} will be executed. So you've created
+a loop. And the good news is that this loop is fully expandable.
+
+It is your job to make sure that what is fed to \comarg\ has
+the correct argument structure.
+
+If \arg{coda} is specified, it is executed when the loop ends,
+if it ends naturally, i.e. by exhausting its input, and not
+by some of the loop-breaking commands on the next page. There
+can be no call to arguments of \arg{parameter text} in the 
+\arg{coda}, e.g.
+
+\example
+\newfor\foo#1{...}[...#1...]
+\example/
+
+\noindent is impossible. (You'll get raw inner code.) Such
+reference to arguments in the \arg{coda} is possible only
+with passed arguments, as you'll see in two pages
+from here.
+
+(Note that if there's no \arg{coda}, any space will be gobbled
+after \barg{definition}. This is so because I thought it was better
+to be able to write \tcode{[\arg{code}]} after a space, e.g.
+a line end, than to stick it to \barg{definition}, even though
+that brings this little inconvenience, which is probably harmless
+since \com\newfor is very unlikely to end up anywhere in horizontal
+mode, i.e. in a paragraph.)
+
+Macro thus created can be freely embedded into one another.
+
+\Example
+\newfor\foo#1,{(#1)}
+\foo{a,b,c,}
+\Example/
+
+
+\cslist{
+  \newfornoempty
+  }
+The \com\newfornoempty is similar to \com\newfor, except \arg{definition}
+is not executed in the case the \ital{first} argument is empty.
+
+
+\Example
+\newfornoempty\foo(#1,#2){[#1/#2]}
+                         [Input exhausted.]
+\edef\bar{\foo{(a,b)(c,d)(,e)(f,)}}
+\meaning\bar
+\Example/
+
+\Example
+\newfor\values#1=#2,{%
+  The value of #1 is #2.\par
+  }
+\def\setvalues#1{%
+  \ifsuffix,{#1}{\values{#1}}
+                {\values{#1,}}%
+  }
+\setvalues{A=12,B=45,}
+\setvalues{C=34}
+\Example/
+
+\Example
+\newstring, % \pdfliteral requires full expansion!
+\def\drawline#1{
+  0 0 m % Initializes the path
+  \ifsuffix,{#1}{\drawlinefor{#1}}
+                {\drawlinefor{#1,}}
+  }                             % l = line
+\newfor\drawlinefor#1 #2,{#1 #2 l }[S]% S = draw path
+\pdfliteral{
+  q  % kind of PDF \bgroup
+  1 0 0 RG \drawline{20 10, 40 -15, 100 0,}
+  0 1 0 RG \drawline{30 -15, 60 10, 130 0}
+  Q} % kind of PDF \egroup
+\Example/
+
+\description/
+
+
+
+
+
+
+
+
+\description{For statements: interruptions}
+
+\noindent (The commands on this page are the same as those
+introduced with \com\dofor; they're explained
+more thoroughly here.)
+
+\cslist{
+  !\breakfor/code/
+  }
+Used inside a loop created with \com\newfor, this
+interrupts it, gobbles the remaining input, and 
+executes \arg{code}. If the loop had a \arg{coda},
+it is not executed. Any material between the \com\breakfor
+command and the end of the definition of the loop
+is gobbled. It is especially bad with conditionals,
+so you should use \com\afterfi, or better yet a
+\com\straightenif version.
+
+\Example
+\newfor\foo#1{%
+  \straighteniff{if}{\noexpand#1z}
+    {\breakfor{There is a `z'!}}
+    #1... % This will be gobbled.
+  }[There is no `z'...]
+
+\foo{abcdef}\par
+\foo{abzdef}
+\Example/
+
+\cslist{
+  !\retrieverest/code/
+  }
+This does the same thing as \com\breakfor, i.e. breaks the
+current loop, but it passes the rest of the material initially
+passed to the loop as a braced argument to \arg{code}. Arguments
+in that remaining material
+aren't extracted from their surrounding delimiters, if any.
+
+\Example
+\def\remainder#1{(And `#1' was still to come.)}
+\newfor\foo#1=#2,{%
+  \unless\ifnum#1=#2 
+    \afterfi{% Thrilling...
+      \retrieverest{There is a false equation!
+                    \remainder}}%
+  \fi}
+\foo{3=3,2=2,451=451,7=4,78=78,9=0,}
+\Example/
+
+
+\cslist{
+  !\pausefor/code/,
+  !\resumefor/loop command/
+  }
+The \com\pausefor command stops the loop and executes \arg{code}.
+That means that you're in the middle of the material being processed and
+you can act on it. It is useful if the material isn't totally
+regular. For instance, a typical Bib\TeX\ entry is a list of
+`\tcode{\arg{field}=\arg{value}}' pairs, with each pair
+terminated by a comma and the \arg{value} either between braces
+or quotes. Thus, you can't have a simple
+
+\example
+\newfor\bibfor#1=#2,{#1...#2}
+\example/{}{}
+
+\noindent to process the entry, because a \arg{value} may be delimited
+by quotes and still contain a comma, and quotes mean nothing to \TeX,
+so the comma will be mistaken for the delimiter. An oversimplified
+solution with \com\pausefor can be seen on the right. The loop actually
+works on the predictable part only (before the equal sign), is interrupted,
+the value is retrieved, and the loop is resumed.
+(Why one would want to process a Bib\TeX\ entry
+with \TeX\ in the first place is a question I can personally answer.)
+
+Once \com\pausefor is used, there must be somewhere down your code
+a \com\resumefor\comarg\ statement, to launch the loop again, otherwise
+you'll end up stumbling on some nasty internal code. It is impossible
+to know (in a perfectly expandable way) the loop we're currently in, hence
+the \comarg\ as a argument to \com\resumefor: it is the loop one wants to
+start again. Yes, it means you can also process the rest of the material
+with another loop, the consequences of which I leave it to you to ponder.
+
+
+\Example
+\newfor\bibfor#1={%
+  \pausefor{\getvalue{#1}}}
+\def\getvalue#1{%
+  \trim{#1}:
+  \ifnextnospace"{\getquotevalue}
+                 {\getcommavalue}
+  }
+\def\getquotevalue"#1",{\showvalue{#1}}
+\def\getcommavalue#1,{\showvalue{#1}}
+\def\showvalue#1{%
+  {\it\trim{#1}}.\par\resumefor\bibfor}
+
+\bibfor{
+  Author = {John Doe},
+  Title  = "Me, myself and I",
+  Year   = 1978,}
+\Example/
+
+\description/
+
+
+
+
+
+
+
+
+
+
+\description{For statements: passed arguments}
+
+
+Suppose you want to retrieve the largest number in
+a list a numbers. The first example on the right shows
+you how to do so. But this solution won't work
+if you need the loop to be expandable, because there's
+a number assignment.
+
+\Example
+\newcount\largest
+\newfor\findlargest#1,{%
+  \ifnum#1>\largest
+    \largest=#1
+  \fi}
+  [The largest number is \the\largest.]
+
+\findlargest{45,33,1,4844,12,655,}
+\Example/
+
+That's why loops defined with \com\newfor can pass
+arguments from one iteration to the next. The number of those arguments
+are the \barg{optional passed arguments} in the description
+of \com\newfor two pages ago. So, a typical fully-fledged
+use of \com\newfor is:
+
+\example
+\newfor\myloop{2}#3=#4,{...#1...#2...#3...#4...}
+                       [...#1...#2...]
+\example/
+
+\noindent which means that \com\myloop takes four arguments,
+two of which are actually passed arguments, the third and the
+four being in the recursive list that \com\myloop runs on.
+Besides, as you can see, passed arguments can appear in
+\arg{coda}.
+Now a call to \com\myloop looks like:
+
+\example
+\myloop{one}{two}{a=1,b=2,...}
+\example/
+
+\noindent where \tcode{one} and \tcode{two} are passed
+arguments. There can be up to 8 passed arguments (since there must
+be at least one argument to loop on), and if there are
+{\it n} of them, numbering of arguments in \arg{parameter text} must
+start at {\it n}+1, as in the above example.
+
+
+\cslist{
+  \passarguments/arg1//arg2/...
+  }
+Passed arguments are automatically retrieved from one iteration
+to the next. However, if you can't change them, they aren't very
+interesting. Hence this command: it passes \arg{arg1}, \arg{arg2}, etc.,
+to the next iteration, replacing the previous ones. There
+must be as many arguments to \com\passarguments as required
+by the loop, even if you don't want to pass new values for
+all (in which case, just pass the previous value).
+Beware: \com\passarguments ends the current iteration, just
+like \com\breakfor,
+and any remaining material in the definition of the loop
+is gobbled.
+
+Thus, the second version of our \com\findlargest command
+works as follows: it takes one harmless passed argument,
+and loops on the following list. Obviously, 45 is larger
+than 0, so it is passed as the new first argument; then,
+33 is not larger than 45, so nothing happen, and 45 is
+implicitly passed again as the first argument, and so
+on and so forth, until finally the \arg{coda} prints
+the largest number in the list. And, as illustrated
+by the \com\edef, everything expands nicely.
+
+\Example
+\newfor\findlargest{1}#2,{%
+  \straighteniff{ifnum}{#2>#1 }
+                {\passarguments{#2}}%
+  }
+  [The largest number is #1.]
+
+\edef\foo{\findlargest{0}{45,33,1,4844,12,655,}}
+\meaning\foo
+\Example/
+
+\description/
+
+
+
+
+
+
+
+
+\description{For statements: examples}
+
+
+Loops created with \com\newfor are somewhat tricky
+to get a hand on, so here are some examples. First
+of all, you might think that it would be nice to
+be able to define a loop whose argument structure
+is defined but not its replacement text, so that you
+can call it on similar lists but with different
+operations. For instance, a generic loop that works
+on all comma-separated lists. You can't do that exactly
+with \com\newfor, but you can easily use passed arguments
+to do something similar, e.g.:
+
+\example
+\newfor\commalist{1}#2,{#1{#2}}
+\commalist\tree{leaf,fruit,twig,}
+\commalist\scale{b minor,f sharp,whatever lydian}
+\example/
+
+\noindent with \com\tree and \com\scale defined to
+process one argument: \com\commalist itself has no real
+definition, and you don't have to bother about passed
+arguments (although you can still use them).
+
+\Example
+\newfor\sortnum{1}#2,{%
+  \subsortnum{#2}{}{#1}%
+  }[Sorted list: #1]
+\newfor\subsortnum{2}#3,{%
+  \straightenif{ifnum}{#1<#3 }
+         {\retrieverest{\passtosortnum{#2#1,#3,}}}
+         {\passarguments{#1}{#2#3,}}%
+  }[\passarguments{#2#1,}]
+\def\passtosortnum#1#2{\passarguments{#1#2}}
+
+\sortnum{}{5,12,-161,3,0,63,22,-45,}
+\Example/
+
+The first example sorts a list of numbers separated
+by commas. The first loop, \com\sortnum, takes a passed
+argument which contains the numbers already sorted (so
+it is empty at the beginning) and it runs on the list
+to be sorted. The second loop, \com\subsortnum, takes
+two passed arguments: the first one is the number under
+investigation, the second one is the list of numbers
+smaller than the number under investigation (so it is
+empty too at the beginning), and it is updated each
+time we find such a number as the third, non-passed
+arguments to \com\subsortnum, which is an element of
+the list of already sorted numbers as preserved in
+\com\sortnum's first passed argument... got that?
+
+Let's follow some iterations. The first call is:
+
+\example
+            % incoming arguments 
+\sortnum{}5,12,-161,3,0,63,22,-45,
+\example/
+
+\noindent and it calls
+
+\example
+\subsortnum{5}{}{}
+\example/
+
+\noindent so that \com\subsortnum terminates immediately:
+it has no input. So it calls its coda:
+
+\example
+\passarguments{5,}
+\example/
+
+\noindent (where \tcode{5} is really the first argument following
+the empty second one). Since \com\subsortnum has terminated, this
+call to \com\passarguments is for \com\sortnum, hence the following
+iteration is:
+
+\example
+              % incoming arguments
+\sortnum{5,}12,-161,3,0,63,22,-45,
+--> \subsortnum{12}{}5,
+\example/
+
+\noindent Ah, something new. 12 is larger than 5, so the conditional
+is false. So \com\subsortnum passes the following to itself:
+
+\example
+\passarguments{12}{5,}
+--> \subsortnum{12}{5,}{}
+\example/
+
+\noindent and once again it terminates, hence:
+
+\example
+\passarguments{5,12,}   % incoming arguments
+--> \sortnum{5,12,}-161,3,0,63,22,-45,
+                         % incoming argument
+--> \subsortnum{-161}{}5,12,
+\example/
+
+\noindent and obviously -161 is smaller than 5, so the rest of the list
+is retrieved with \com\retrieverest and passed as the second argument of
+\com\passtosortnum. Once again, since this terminates \com\subsortnum,
+\com\passarguments in \com\passtosortnum is for \com\sortnum:
+
+\example
+\passtosortnum{-161,5,}{12,}
+                          % incoming arguments
+--> \sortnum{-161,5,12,}3,0,63,22,-45,
+                         % incoming arguments
+--> \subsortnum{3}{}-161,5,12,
+--> \subsortnum{3}{-161,}5,12,
+--> \passarguments{161,3,5,12,}
+--> \sortnum{-161,3,5,12,}0,63,22,-45,
+...
+\example/
+
+
+\noindent and so on and so forth.
+
+Replace the test with any other one and you
+have a generic sorting function, as in the example
+on the right, which sorts entries alphabetically
+or chronologically. It is possible to make things both 
+cleverer and simpler. (The Lua code compares two
+strings, and it could very well have handled the
+\com\year version.)
+
+\Example
+\newfor\sortbooks{2}#3(#4),{%
+  \subsortbooks#1{#3(#4)}{}{#2}
+  }[\bgroup\it#2\egroup]
+\newfor\subsortbooks{3}#4(#5),{%
+  #1#2{#4}{#5}{#3}
+  }[\passarguments#1{#3#2,}]
+
+\def\alpha#1(#2)#3#4#5{%
+  \directlua{
+    if "#1"<"#3" then 
+      tex.print("\noexpand\\firstoftwo")
+    else 
+      tex.print("\noexpand\\secondoftwo")
+    end}
+    {\retrieverest{%
+      \passtosortbooks\alpha{#5#1(#2),#3(#4),}}}
+    {\passarguments\alpha{#1(#2)}{#5#3(#4),}}
+  }
+\def\year#1(#2)#3#4#5{
+  \straightenif{ifnum}{#2<#4 }
+      {\retrieverest{%
+        \passtosortbooks\year{#5#1(#2),#3(#4),}}}
+      {\passarguments\year{#1(#2)}{#5#3(#4),}}
+  }
+\def\passtosortbooks#1#2#3{\passarguments#1{#2#3}}
+
+\def\books{
+  Oblivion (2004),
+  Infinite Jest (1996),
+  Brief Interviews with Hideous Men (1999),
+  Girl with Curious Hair (1989),
+  The Broom of the System (1987),
+  The Pale King (2011),
+  }
+David Foster Wallace's books in alphabetical order:\par
+\passexpanded{\sortbooks\alpha{}}\books \par
+David Foster Wallace's books ordered by date:\par
+\passexpanded{\sortbooks\year{}}\books 
+\Example/
+
+\vskip\baselineskip
+
+The next example is a palindrome detector: it returns
+true if the string it is fed is made of a string followed
+by itself reverse (which is not the exact definition of
+a palindrome, which is a string that is its own reverse,
+but we keep things simple).
+
+The first loop, \com\palincount, simply counts the number
+of characters in the string; it also reaccumulates it
+as its second argument, something that could be avoided
+if there was a wrapper macro. Once it is finished, it
+passes the original string along with half the number
+of characters to \com\palincheck, which simply accumulates
+in reverse this number of characters, by decreasing it
+on each iteration. Once this number is exhausted, it
+compares what it has accumulated to what there remains
+to be processed, and if both strings match, the original
+string is a palindrome.
+
+\Example
+\newfor\palincount{2}#3{%
+  \passarguments{\numexpr(#1+1)}{#2#3}%
+  }[\palincheck{\numexpr(#1/2)}{}{#2}]
+\newfor\palincheck{2}#3{%
+  \reverse\straightenif{ifnum}{\numexpr(#1-1)>0 }
+               {\retrieverest{\compare{#3#2}}}
+               {\passarguments{\numexpr(#1-1)}{#3#2}}%
+  }
+\def\compare#1#2{%
+  \ifstring{#1}{#2}{TRUE}{FALSE}%
+  }
+
+\edef\foo{\palincount{0}{}{abcdeffedcba}}
+\edef\bar{\palincount{0}{}{abcdff}}
+\meaning\foo, \meaning\bar
+\Example/
+
+
+\description/
+
+
+\bye
+
+
+
+
+
+
+
+
+
+
+\sortbooks{}{%
+  The Broom of the System (1987),%
+  Infinite Jest (1995),%
+  Girl with Curious Hair (1989),%
+  Brief Interviews with Hideous Men (1999),%
+  Oblivion (2004),%
+  The Pale King (2011),}
+
+\newfor\palin{2}#3{%
+  \passargs{\numexpr(#1+1)}{#2#3}%
+  }{\palincheck{\numexpr(#1/2)}{}{#2}}
+\newfor\palincheck{2}#3{%
+  \reverse\straightenif{ifnum}{\numexpr(#1-1)>0 }
+               {\retrievefor{\compare{#3#2}}}
+               {\passargs{\numexpr(#1-1)}{#3#2}}
+  }{}
+\def\compare#1#2{%
+  \ifstring{#1}{#2}{TRUE}{FALSE}%
+  }
+
+
++\edef\foo{\palin{0}{}{in noctes .. setconni}}+\foo
diff --git a/Master/texmf-dist/tex/generic/texapi/texapi.tex b/Master/texmf-dist/tex/generic/texapi/texapi.tex
new file mode 100644
index 00000000000..11b31c9eadf
--- /dev/null
+++ b/Master/texmf-dist/tex/generic/texapi/texapi.tex
@@ -0,0 +1,899 @@
+% This is the texapi package.
+% Relevant information can be found in texapi-doc.pdf
+%
+% Author: Paul Isambert.
+% E-mail: zappathustra AT free DOT fr
+% Comments and suggestions are welcome.
+% Date: June 2010.
+%
+\ifx\texapialreadyloaded\somethingtotallyundefined
+\else
+  \expandafter\endinput
+\fi
+\let\texapialreadyloaded\relax
+\ifx\eTeXversion\somethingtotallyundefined
+  \errmessage{texapi error: You need eTeX to run this. I quit}
+  \expandafter\endinput
+\fi
+%
+\expandafter\edef\csname pi@restorecatcodes\endcsname{%
+  \catcode`\noexpand\@=\the\catcode`@\relax
+  \catcode`\noexpand\_=\the\catcode`_\relax
+  }
+\catcode`\@=11 \catcode`\_=11
+%
+%
+%
+%
+%
+% ENGINES
+% 
+\chardef\texenginenumber=0
+\ifdefined\XeTeXinterchartoks
+  \chardef\texenginenumber=1
+\else
+% LuaTeX doesn't have \pdfstrcmp anymore.
+  \ifdefined\directlua
+    \chardef\texenginenumber=3
+  \else
+    \ifdefined\pdfstrcmp
+      \chardef\texenginenumber=2
+    \fi
+  \fi
+\fi
+%
+%
+%
+%
+% FORMATS
+%
+% It'd be safer if \formatnumber was already
+% defined in a wrapper file for ConTeXt and LaTeX.
+% 
+\unless\ifdefined\formatnumber
+  \chardef\formatnumber=0
+  \def\pi@temp{plain}
+  \ifx\fmtname\pi@temp
+    \chardef\formatnumber=1
+  \else
+    \def\pi@temp{eplain}
+    \ifx\fmtname\pi@temp
+      \chardef\formatnumber=2
+    \else
+      % I'm not sure what ConTeXt's doing with \fmtname,
+      % so I make do with this lovely control sequence.
+      \ifdefined\inspectnextoptionalcharacter
+        \chardef\formatnumber=3
+      \else
+        \def\fmtname{LaTeX2e}
+        \ifx\fmtname\pi@temp
+          \chardef\formatnumber=4
+          \ifdefined\ExplSyntaxOn
+            \chardef\formatnumber=5
+          \fi
+        \fi
+      \fi
+    \fi
+  \fi
+\fi
+%
+% We need to get some primitives back.
+% More should be done, probably.
+%
+\ifnum\formatnumber=3
+  % ConTeXt
+  \let\priminput\normalinput
+  \let\primunexpanded\normalunexpanded
+  \def\loadmacrofile#1{\usemodule[#1]}
+  \def\senderror#1#2{%
+    \writestatus{#1 error}{#2}%
+    }
+\else
+  \ifnum\formatnumber=4
+    % LaTeX2e
+    \let\priminput\@@input
+    \let\primunexpanded\unexpanded
+    \let\loadmacrofile\RequirePackage
+    \def\senderror#1#2{%
+      \PackageError{#1}{#2}{}%
+      }
+  \else
+    \ifnum\formatnumber=5
+      % LaTeX3
+      % I don't know if this is of any good.
+      % LaTeX3 will either not rename those primitives,
+      % or turn all primitives to error messages (nightmare),
+      % as far as I can see.
+      \expandafter\let\expandafter\priminput\csname tex_input:D\endcsname
+      \expandafter\let\expandafter\primunexpanded\csname etex_unexpanded:D\endcsname
+      \let\loadmacrofile\RequirePackage
+      \def\senderror#1#2{%
+        \PackageError{#1}{#2}{}%
+        }
+    \else
+      % Plain and eplain, or an unknown format.
+      \let\priminput\input
+      \let\primunexpanded\unexpanded
+      \def\loadmacrofile#1{\priminput#1 }
+      \def\senderror#1#2{%
+        \errmessage{#1 error: #2}%
+        }
+    \fi
+  \fi
+\fi
+%
+%
+%
+%
+% INTERNAL UTILITIES
+%
+\def\pdef{\protected\def}
+\def\pi@terminator{\senderror{texapi}{This shouldn't be happening}}
+\long\def\pi@gobbletoterminator#1#2\pi@terminator{#1} % I generally want something to happen after a terminator.
+%
+%
+%
+% 
+% ARGUMENTS MANIPULATION
+%
+\long\def\gobbleone#1{}               \long\def\gobbletwo#1#2{}               \long\def\gobblethree#1#2#3{}
+\long\def\gobblefour#1#2#3#4{}        \long\def\gobblefive#1#2#3#4#5{}        \long\def\gobblesix#1#2#3#4#5#6{}
+\long\def\gobbleseven#1#2#3#4#5#6#7{} \long\def\gobbleeight#1#2#3#4#5#6#7#8{} \long\def\gobblenine#1#2#3#4#5#6#7#8#9{}
+%
+\long\def\gobbleoneand#1#2{#1}               \long\def\gobbletwoand#1#2#3{#1}               \long\def\gobblethreeand#1#2#3#4{#1}
+\long\def\gobblefourand#1#2#3#4#5{#1}        \long\def\gobblefiveand#1#2#3#4#5#6{#1}        \long\def\gobblesixand#1#2#3#4#5#6#7{#1}
+\long\def\gobblesevenand#1#2#3#4#5#6#7#8{#1} \long\def\gobbleeightand#1#2#3#4#5#6#7#8#9{#1}
+\long\def\gobblenineand#1#2#3#4#5#6#7#8#9{\gobbleoneand{#1}}
+%
+\long\def\unbrace#1{#1} \long\def\firstoftwo#1#2{#1} \long\def\secondoftwo#1#2{#2}
+%
+\long\def\swapargs#1#2{#2#1}         \long\def\swapbraced#1#2{{#2}{#1}}
+\long\def\swapleftbraced#1#2{{#2}#1} \long\def\swaprightbraced#1#2{#2{#1}}
+%
+\long\def\passexpanded#1#2{\expandafter\swaprightbraced\expandafter{#2}{#1}}
+\long\def\passexpandednobraces#1#2{\expandafter\swapargs\expandafter{#2}{#1}}
+%
+\def\emptycs{} \def\spacecs{ }
+\bgroup
+\def\:{\global\let\spacechar= }\: %
+\egroup
+%
+%
+%
+%
+% COMMAND DEFINITIONS
+%
+% All the \...cs stuff must be \long, because
+% even though \par is (generally) unexpandable
+% it can be \string'ed.
+\long\def\usecs#1{\csname#1\endcsname} 
+\long\def\usecsafter#1{\expandafter\expandafter\csname#1\endcsname}
+\long\def\noexpandcs#1{\expandafter\noexpand\csname#1\endcsname}
+\long\def\unexpandedcs#1{\primunexpanded\expandafter\expandafter\expandafter{\csname#1\endcsname}}
+\long\def\passcs#1#2{\expandafter\swapargs\csname#2\endcsname{#1}}
+\long\def\passexpandedcs#1#2{\passcs{\passexpanded{#1}}{#2}}
+\long\def\commandtoname#1{\expandafter\gobbleone\string#1}
+%
+\long\pdef\defcs#1{\expandafter\def  \csname#1\endcsname}
+\long\pdef\edefcs#1{\expandafter\edef \csname#1\endcsname}
+\long\pdef\gdefcs#1{\expandafter\gdef \csname#1\endcsname}
+\long\pdef\xdefcs#1{\expandafter\xdef \csname#1\endcsname}
+\long\pdef\letcs#1{\expandafter\let  \csname#1\endcsname}
+% If \csname#2\endcsname is undefined,
+% we don't want to set it to \relax.
+\long\pdef\lettocs   #1#2{\ifcs{#2}{\expandafter\let\expandafter#1\csname#2\endcsname}{\let#1\somethingtottallyundefined}}
+\long\pdef\letcstocs #1#2{%
+  \ifcs{#2}
+       {\expandafter\expandafter\expandafter\let\expandafter\expandafter\csname#1\endcsname\csname#2\endcsname}
+       {\expandafter\let\csname#1\endcsname\somethingtotallyundefined}%
+  }
+%
+\long\pdef\addleft#1#2{%
+  \edef#1{\primunexpanded{#2}\primunexpanded\expandafter{#1}}%
+  }
+\long\pdef\eaddleft#1#2{%
+  \edef#1{#2\primunexpanded\expandafter{#1}}%
+  }
+\long\pdef\addleftcs#1#2{%
+  \edefcs{#1}{\primunexpanded{#2}\unexpandedcs{#1}}%
+  }
+\long\pdef\eaddleftcs#1#2{%
+  \edefcs{#1}{#2\unexpandedcs{#1}}%
+  }
+\long\pdef\addright#1#2{%
+  \edef#1{\primunexpanded\expandafter{#1}\primunexpanded{#2}}%
+  }
+\long\pdef\eaddright#1#2{%
+  \edef#1{\primunexpanded\expandafter{#1}#2}%
+  }
+\long\pdef\addrightcs#1#2{%
+  \edefcs{#1}{\unexpandedcs{#1}\primunexpanded{#2}}%
+  }
+\long\pdef\eaddrightcs#1#2{%
+  \edefcs{#1}{\unexpandedcs{#1}#2}%
+  }
+%
+%
+%
+% COMMAND TESTING 
+%
+%
+\def\reverse#1{%
+  \ifcs{pi@reverse_\commandtoname#1}
+    {\usecs{pi@reverse_\commandtoname#1}}
+    {\senderror{texapi}{You can't use `\string\reverse' before `\string#1'}#1}%
+  }
+%
+\def\pi@ifdef_simple#1#2{%
+  \long\def#1##1{%
+    #2%
+      \expandafter\firstoftwo
+    \else
+      \expandafter\secondoftwo
+    \fi
+  }%
+  \defcs{pi@reverse_\commandtoname#1}{\expandafter\unless#1}%
+  % \iff... version
+  \long\defcs{if\expandafter\gobbletwo\string#1}##1{%
+    #2%
+      \expandafter\unbrace
+    \else
+      \expandafter\gobbleone
+    \fi
+    }%
+  \defcs{pi@reverse_if\expandafter\gobbletwo\string#1}{\passcs{\expandafter\unless}{if\expandafter\gobbletwo\string#1}}%
+  }
+%
+\pi@ifdef_simple\ifcommand{\ifdefined#1}
+\pi@ifdef_simple\ifcs{\ifcsname#1\endcsname}
+\pi@ifdef_simple\ifemptycommand{\ifx#1\emptycs}
+%
+\def\pi@ifdef_onearg#1{%
+  \long\defcs{pi@reverse_\commandtoname#1}##1##2##3{#1{##1}{##3}{##2}}%
+  % This is the \iff... version
+  \long\defcs{if\expandafter\gobbletwo\string#1}##1##2{#1{##1}{##2}{}}%
+  \long\defcs{pi@reverse_if\expandafter\gobbletwo\string#1}##1##2{#1{##1}{}{##2}}%
+  % In many cases, \long is better, otherwise it does no real harm.
+  \long\def#1##1%
+  }
+\pi@ifdef_onearg\ifemptycs{%
+  \ifcs{#1}
+% No point using \ifxcs, that would run useless tests.
+       {\expandafter\ifx\csname#1\endcsname\emptycs
+          \expandafter\firstoftwo
+        \else
+          \expandafter\secondoftwo
+        \fi}
+       \secondoftwo
+  }
+\def\pi@ifdef_twoarg#1{%
+  \long\defcs{pi@reverse_\commandtoname#1}##1##2##3##4{#1{##1}{##2}{##4}{##3}}%
+  \long\defcs{if\expandafter\gobbletwo\string#1}##1##2##3{#1{##1}{##2}{##3}{}}%
+  \long\defcs{pi@reverse_if\expandafter\gobbletwo\string#1}##1##2##3{#1{##1}{##2}{}{##3}}%
+  \long\def#1##1##2%
+  }
+%
+\pi@ifdef_twoarg\ifxcs{%
+  \ifcs{#1}
+       {\expandafter\ifx\csname#1\endcsname#2%
+          \expandafter\firstoftwo
+        \else
+          \expandafter\secondoftwo
+        \fi}
+       {\ifcommand#2\secondoftwo\firstoftwo}
+  }
+%
+\pi@ifdef_twoarg\ifxcscs{%
+  \ifcs{#1}
+       {\ifcs{#2}
+             {\passcs{\expandafter\ifx\csname#1\endcsname}{#2}%
+                \expandafter\firstoftwo\else\expandafter\secondoftwo\fi}
+             {\secondoftwo}}
+       {\ifcs{#2}
+             {\secondoftwo}
+             {\firstoftwo}}
+  }
+%
+%
+%
+%
+% CUSTOM \IF'S
+%
+\pdef\newife#1{%
+  \expandafter\passexpandednobraces\expandafter\pi@newif_strip\expandafter{\expandafter\gobbleone\string#1\pi@terminator}
+  }
+\bgroup
+\uccode`2=`i \uccode`3=`f
+\uppercase{
+  \gdef\pi@newif_strip23#1\pi@terminator{%
+    \pi@newif_def{#1}%
+    }
+  }
+\egroup
+%
+\def\pi@newif_def#1{%
+  \letcs{if#1}\secondoftwo
+  \long\edefcs{pi@reverse_if#1}##1##2{\noexpandcs{if#1}{##2}{##1}}%
+  \edefcs{iff#1}{\noexpandcs{if#1}\noexpand\unbrace\noexpand\gobbleone}%
+  \edefcs{pi@reverse_iff#1}{\noexpandcs{if#1}\noexpand\gobbleone\noexpand\unbrace}%
+  \defcs{#1true}{%
+    \letcs{if#1}\firstoftwo
+    }%
+  \defcs{#1false}{%
+    \letcs{if#1}\secondoftwo
+    }%
+  }
+%
+\long\def\straightenif#1#2{%
+  \usecs{#1}#2%
+    \expandafter\firstoftwo
+  \else
+    \expandafter\secondoftwo
+  \fi
+  }
+\long\def\straighteniff#1#2{%
+  \usecs{#1}#2%
+    \expandafter\unbrace
+  \else
+    \expandafter\gobbleone
+  \fi
+  }
+\long\def\pi@reverse_straightenif#1#2{%
+  \usecs{#1}#2%
+    \expandafter\secondoftwo
+  \else
+    \expandafter\firstoftwo
+  \fi
+  }
+\long\def\pi@reverse_straighteniff#1#2{%
+  \usecs{#1}#2%
+    \expandafter\gobbleone
+  \else
+    \expandafter\unbrace
+  \fi
+  }
+%
+%
+%
+%
+% This is dangerous. But useful to get 
+% material across a conditional.
+%
+\long\def\afterfi#1#2\fi{\fi#1}
+\long\def\afterdummyfi#1#2\fi{#1}
+%
+%
+%
+%
+% WHAT COMES NEXT
+%
+\newtoks\pi@temp_tokenA
+\newtoks\pi@temp_tokenB
+\long\pdef\nospace#1{%
+  \pi@temp_tokenA={#1}%
+  \def\pi@nospace_repeat{%
+    \expandafter\nospace\expandafter{\the\pi@temp_tokenA}%
+    }%
+  \futurelet\pi@temp\pi@nospace_check
+  }
+\def\pi@nospace_check{%
+  \ifx\pi@temp\spacechar
+    \afterfi{%
+      \afterassignment\pi@nospace_repeat
+      \let\pi@temp= }%
+  \else
+    \expandafter\the\expandafter\pi@temp_tokenA
+  \fi
+  }
+%
+\def\pi@ifdef_next#1#2#3{%
+  \pdef#1{\pi@ifnext_any#2}%
+  \protected\defcs{\commandtoname#1nospace}{\pi@ifnext_nospace#2}%
+  \protected\defcs{if\expandafter\gobbletwo\string#1}{\pi@iffnext_any#2}%
+  \protected\defcs{if\expandafter\gobbletwo\string#1nospace}{\pi@iffnext_nospace#2}%
+% \reverse version
+  \protected\defcs{pi@reverse_\commandtoname#1}{\pi@ifnext_any#3}%
+  \protected\defcs{pi@reverse_\commandtoname#1nospace}{\pi@ifnext_nospace#3}%
+  \protected\defcs{pi@reverse_if\expandafter\gobbletwo\string#1}{\pi@iffnext_any#3}%
+  \protected\defcs{pi@reverse_if\expandafter\gobbletwo\string#1nospace}{\pi@iffnext_nospace#3}%
+  }
+%
+\def\pi@unlessif{\unless\if}
+\pi@ifdef_next\ifnext\if\pi@unlessif
+\def\pi@unlessifcat{\unless\ifcat}
+\pi@ifdef_next\ifcatnext\ifcat\pi@unlessifcat
+\def\pi@unlessifx{\expandafter\unless\pi@ifx}
+\pi@ifdef_next\ifxnext\pi@ifx\pi@unlessifx
+% We remove the \noexpand's.
+\long\def\pi@ifx#1#2#3#4{\ifx#2#4}
+% Would the following be faster?
+% \long\def\pi@ifx\noexpand#1\noexpand#2{\ifx#1#2}
+% I wonder.
+\long\def\pi@ifnext_any#1#2#3#4{%
+  \let\pi@ifnext_test=#1%
+  \let\pi@ifnext_token= #2%
+  \pi@temp_tokenA={#3}%
+  \pi@temp_tokenB={#4}%
+  \futurelet\pi@temp\pi@ifnext_do
+  }
+\long\def\pi@ifnext_nospace#1#2#3#4{%
+  \nospace{\pi@ifnext_any#1#2{#3}{#4}}%
+  }
+\long\def\pi@iffnext_any#1#2#3{%
+  \pi@ifnext_any#1#2{#3}{}%
+  }
+\long\def\pi@iffnext_nospace#1#2#3{%
+  \nospace{\pi@ifnext_any#1#2{#3}{}}%
+  }
+\def\pi@ifnext_do{%
+  \pi@ifnext_test\noexpand\pi@temp\noexpand\pi@ifnext_token
+    \expandafter\the\expandafter\pi@temp_tokenA
+  \else
+    \expandafter\the\expandafter\pi@temp_tokenB
+  \fi
+  }
+%
+%
+%
+%
+% FOR LOOPS
+%
+\newcount\pi@dofor_count
+\newif\ifpi@dofor_noempty
+\pdef\dofor{%
+  \pi@dofor_noemptyfalse\pi@dofor_getlist
+  }
+\pdef\dofornoempty{%
+  \pi@dofor_noemptytrue\pi@dofor_getlist
+  }
+\long\def\pi@dofor_getlist#1{%
+  \nospace{\pi@dofor_getparameter{#1}}%
+  }
+\long\def\pi@dofor_getparameter#1#2#{%
+  \pi@dofor_dolist{#1}{#2}%
+  }
+\long\def\pi@dofor_dolist#1#2#3{%
+% We keep count so loops can be nested.
+  \global\advance\pi@dofor_count1
+  \ifpi@dofor_noempty
+    \long\defcs{pi@dofor_loop\the\pi@dofor_count}#2{%
+      \ifemptystring{##1}
+                    {\pi@dofor_control}
+                    {#3\pi@newfor_markloop{pi@dofor_control}}%
+      }%
+  \else
+    \long\defcs{pi@dofor_loop\the\pi@dofor_count}#2{#3\pi@newfor_markloop{pi@dofor_control}}%
+  \fi
+  \pi@dofor_control#1\pi@terminator
+  }
+\def\pi@dofor_control{%
+  \ifxnext\pi@terminator
+          {\global\advance\pi@dofor_count-1
+%          Unbrace the fourth argument.
+           \pi@gobbletoterminator\unbrace}
+          {\usecs{pi@dofor_loop\the\pi@dofor_count}}%
+  }
+\let\pi@dofor_originalcontrol\pi@dofor_control
+\let\resumedofor\pi@dofor_control
+\long\pdef\breakdofor#1#2\pi@dofor_control#3\pi@terminator{%
+  \global\advance\pi@dofor_count-1
+  %   Gobble the fourth argument (executed if the loop lives to its own natural end).
+  \gobbleoneand{#1}%
+  }
+\def\pi@dofor_retrieverest#1#2\pi@terminator{%
+  \global\advance\pi@dofor_count-1
+  \gobbleoneand{#1{#2}}%
+  }%
+\long\pdef\pausedofor#1#2\pi@dofor_control{#1}
+%
+%
+%
+%
+% CUSTOM FOR LOOPS
+% And here's the big one.
+%
+\pdef\newfor#1{%
+  \pi@dofor_noemptyfalse
+  \ifcatnext\bgroup{\pi@newfor_pass{#1}}
+                   {\pi@newfor_pass{#1}{0}}%
+  }
+\pdef\newfornoempty#1{%
+  \pi@dofor_noemptytrue
+  \ifcatnext\bgroup{\nospace{\pi@newfor_pass{#1}}}
+                   {\nospace{\pi@newfor_pass{#1}{0}}}%
+  }
+\long\def\pi@newfor_pass#1#2#3#{%
+  \pi@newfor_getcoda{#1}{#2}{#3}
+  }
+\long\def\pi@newfor_getcoda#1#2#3#4{%
+  \ifnextnospace[{\pi@newfor_create{#1}{#2}{#3}{#4}}
+                 {\pi@newfor_create{#1}{#2}{#3}{#4}[]}%
+  }
+\let\pi@newfor_pi@nf_tm_\relax
+\let\pi@nf_tm\pi@terminator
+\let\pi@newfor_preloop\emptycs
+\long\def\pi@newfor_create#1#2#3#4[#5]{%
+  \def\pi@temp##1##2##3##4##5##6##7##8##9{#3}%
+  \pi@temp_tokenA={\pi@newfor_define#1{#3}{#4}{#5}}%
+  \ifcase#2\relax
+      \the\pi@temp_tokenA 1{}{}{\pi@nf_tm\pi@nf_tm\pi@nf_tm\pi@nf_tm\pi@nf_tm\pi@nf_tm\pi@nf_tm\pi@nf_tm\pi@nf_tm}\unbrace
+  \or \the\pi@temp_tokenA 2{##1}{{##1}}{{}\pi@nf_tm\pi@nf_tm\pi@nf_tm\pi@nf_tm\pi@nf_tm\pi@nf_tm\pi@nf_tm\pi@nf_tm}\gobbleoneand
+  \or \the\pi@temp_tokenA 3{##1##2}{{##1}{##2}}{{}{}\pi@nf_tm\pi@nf_tm\pi@nf_tm\pi@nf_tm\pi@nf_tm\pi@nf_tm\pi@nf_tm}\gobbletwoand
+  \or \the\pi@temp_tokenA 4{##1##2##3}{{##1}{##2}{##3}}{{}{}{}\pi@nf_tm\pi@nf_tm\pi@nf_tm\pi@nf_tm\pi@nf_tm\pi@nf_tm}\gobblethreeand
+  \or \the\pi@temp_tokenA 5{##1##2##3##4}{{##1}{##2}{##3}{##4}}{{}{}{}{}\pi@nf_tm\pi@nf_tm\pi@nf_tm\pi@nf_tm\pi@nf_tm}\gobblefourand
+  \or \the\pi@temp_tokenA 6{##1##2##3##4##5}{{##1}{##2}{##3}{##4}{##5}}{{}{}{}{}{}\pi@nf_tm\pi@nf_tm\pi@nf_tm\pi@nf_tm}\gobblefiveand
+  \or \the\pi@temp_tokenA 7{##1##2##3##4##5##6}{{##1}{##2}{##3}{##4}{##5}{##6}}{{}{}{}{}{}{}\pi@nf_tm\pi@nf_tm\pi@nf_tm}\gobblesixand
+  \or \the\pi@temp_tokenA 8{##1##2##3##4##5##6##7}{{##1}{##2}{##3}{##4}{##5}{##6}{##7}}{{}{}{}{}{}{}{}\pi@nf_tm\pi@nf_tm}\gobblesevenand
+  \or \the\pi@temp_tokenA 9{##1##2##3##4##5##6##7##8}{{##1}{##2}{##3}{##4}{##5}{##6}{##7}{##8}}{{}{}{}{}{}{}{}{}\pi@nf_tm}\gobbleeightand
+  \else \senderror{texapi}{You can't have more than 8 passed arguments. Definition aborted}%
+  \fi
+  }
+%
+% \newfor\foo{<n>}<parameters>{<definition>}{<coda>}
+%        |#1      |#2         |#3           |#4
+% #5 = <n>+1
+% #6 = ##1##2...##n
+% #7 = {##1}{##2}...{##n}
+% #8 = <parameters> with terminators as arguments, to mark the end of the loop.
+% #9 = \gobble<n>and
+% 
+% So, for instance, something like \edef#1#6###5 means
+% (without the double hashes):
+% \edef\foo#1#2...#n#<n+1>, e.g. with n=3
+% \edef\foo#1#2#3#4
+% hence \foo{<first>}{<second>}{<third>}{<list>}
+%           |_________ passed _________|
+%
+% and this calls:
+% \pi@newfor_userdefined:foo#7###5
+% => \pi@newfor_userdefined:foo{#1}{#2}{#3}#4<terminators>
+% => \pi@newfor_userdefined:foo{<first>}{<second>}{<third>}<list><terminators>
+% and of course \pi@newfor_userdefined:foo sees only the head of <list>.
+% 
+% The first argument of <list> is tested to check whether it's a terminator
+% (and whether it's empty in the noempty case) in which case the <coda>,
+% i.e. #4, is executed. Otherwise <definition>, i.e. #3, is launched.
+%
+% \pi@newfor_markloop is just \usecs; but it's also a delimiter for
+% \breakfor, \passarguments, etc., i.e. it delimits the code to be gobbled.
+% \pi@newdor_preloop is a dummy macro that expands to nothing but which
+% is useful in one special case: viz. \passarguments{<arg>} with only one
+% argument passed, and at the end of a loop so that there's no intervening
+% code; \passarguments calls \getargs@pi@newfor_userdefined:foo on its
+% arguments, which should be properly braced; but because TeX removes
+% braces around delimited arguments that fit exactly into the delimiters,
+% \passarguments as just described would pass an unbraced argument, hence kertwang.
+% \pi@newfor_preloop ensures that <arg> is never the sole properly fitted
+% and hence unbracing-prone argument. It is then used by \getargs@pi@newfor_userdefined:foo
+% to remove remaining code, if any.
+% 
+%
+%
+% The definition is pretty ugly, but it works, and
+% you should've seen what it looked like when I started.
+%
+\long\def\pi@newfor_define#1#2#3#4#5#6#7#8#9{%
+  \long\edef#1#6###5{%
+    \noexpandcs{pi@newfor_userdefined:\commandtoname#1}%
+    #7###5\primunexpanded\expandafter{\pi@temp#8\pi@terminator}%
+    }%
+  \ifpi@dofor_noempty
+    \long\defcs{pi@newfor_userdefined:\commandtoname#1}#6#2{%
+      \ifcs{pi@newfor_\commandtoname###5_}
+           {\pi@gobbletoterminator{#4}}%
+           {\ifemptystring{###5}
+                          {\usecs{pi@newfor_userdefined:\commandtoname#1}#7}
+                          {#3\pi@newfor_preloop\pi@newfor_markloop{pi@newfor_userdefined:\commandtoname#1}#7}}%
+      }%
+  \else
+    \long\defcs{pi@newfor_userdefined:\commandtoname#1}#6#2{%
+        \ifcs{pi@newfor_\commandtoname###5_}
+             {\pi@gobbletoterminator{#4}}
+             {#3\pi@newfor_preloop\pi@newfor_markloop{pi@newfor_userdefined:\commandtoname#1}#7}%
+        }%
+  \fi
+  \long\defcs{getargs@pi@newfor_userdefined:\commandtoname#1}#6###5\pi@newfor_preloop{%
+    #9{\usecs{pi@newfor_userdefined:\commandtoname#1}#7}%
+    }%
+  \passexpandednobraces{\long\defcs{retrievefor@pi@newfor_userdefined:\commandtoname#1}##1##2}%
+                       {\pi@temp#8\pi@terminator}%
+                       {\passexpanded{##1}{#9{}##2}}%
+  }
+%
+\long\def\pi@newfor_markloop#1{\usecs{#1}}
+\long\def\passarguments#1\pi@newfor_markloop#2{%
+  \usecs{getargs@#2}#1%
+  }
+\long\def\breakfor#1#2\pi@newfor_markloop#3#4\pi@terminator{%
+  \ifstring{#3}{pi@dofor_control}%
+    {\gobbleoneand{#1}}
+    {#1}%
+  }
+\long\def\pausefor#1#2\pi@newfor_markloop#3{#1}
+\long\def\resumefor#1{%
+  \ifstring{#1}{\dofor}
+    {\pi@dofor_control}
+    {\usecs{pi@newfor_userdefined:\commandtoname#1}}%
+  }
+\long\def\retrieverest#1#2\pi@newfor_markloop#3{%
+  \ifstring{#3}{pi@dofor_control}%
+    {\pi@dofor_retrieverest{#1}}
+    {\usecs{retrievefor@#3}{#1}}%
+  }
+%
+%
+%
+%
+% WHILE LOOPS
+%
+\long\def\repeatuntil#1{%
+  \pi@repeatuntil_loop{\numexpr(0)}{#1}%
+  }
+\long\def\pi@repeatuntil_loop#1#2#3{%
+  \ifnum#2>#1\relax
+    \expandafter\unbrace
+  \else
+    \expandafter\gobbleone
+  \fi
+  {#3\pi@repeatuntil_loop{\numexpr(#1+1)}{#2}{#3}}%
+  }
+%
+\long\def\dowhile#1#2{%
+  #1{#2\dowhile{#1}{#2}}{}%
+  }
+%
+%
+%
+%
+% CUSTOM WHILE LOOPS
+%
+% \newdowhile\foo<nb of args><trarg_1>...<trarg_n><body>
+% where <trarg_1>...<trarg_n> are the transformations of <arg_1>...<arg_n>
+% from one iteration to the next.
+%
+% The \newhile is basically a simple version of \newfor.
+%
+\long\pdef\newwhile#1#2{%
+  \def\pi@temp{#1}%
+  \ifcase#2
+  \expandafter\pi@newwhile_getzero
+  \or\expandafter\pi@newwhile_getone
+  \or\expandafter\pi@newwhile_gettwo
+  \or\expandafter\pi@newwhile_getthree
+  \or\expandafter\pi@newwhile_getfour
+  \or\expandafter\pi@newwhile_getfive
+  \or\expandafter\pi@newwhile_getsix
+  \or\expandafter\pi@newwhile_getseven
+  \or\expandafter\pi@newwhile_geteight
+  \or\expandafter\pi@newwhile_getnine
+  \fi
+  }
+\long\def\pi@newwhile_getzero{%
+  \expandafter\pi@newwhile_create\pi@temp{}{}{}\unbrace}
+\long\def\pi@newwhile_getone#1{%
+  \expandafter\pi@newwhile_create
+    \pi@temp{##1}{{##1}}{{#1}}\gobbleoneand}
+\long\def\pi@newwhile_gettwo#1#2{%
+  \expandafter\pi@newwhile_create
+    \pi@temp{##1##2}{{##1}{##2}}{{#1}{#2}}\gobbletwoand}
+\long\def\pi@newwhile_getthree#1#2#3{%
+  \expandafter\pi@newwhile_create
+    \pi@temp{##1##2##3}{{##1}{##2}{##3}}{{#1}{#2}{#3}}\gobblethreeand}
+\long\def\pi@newwhile_getfour#1#2#3#4{%
+  \expandafter\pi@newwhile_create
+    \pi@temp{##1##2##3##4}{{##1}{##2}{##3}{##4}}{{#1}{#2}{#3}{#4}}\gobblefourand}
+\long\def\pi@newwhile_getfive#1#2#3#4#5{%
+  \expandafter\pi@newwhile_create
+    \pi@temp{##1##2##3##4##5}{{##1}{##2}{##3}{##4}{##5}}{{#1}{#2}{#3}{#4}{#5}}\gobblefiveand}
+\long\def\pi@newwhile_getsix#1#2#3#4#5#6{%
+  \expandafter\pi@newwhile_create
+    \pi@temp{##1##2##3##4##5##6}{{##1}{##2}{##3}{##4}{##5}{##6}}{{#1}{#2}{#3}{#4}{#5}{#6}}\gobblesixand}
+\long\def\pi@newwhile_getseven#1#2#3#4#5#6#7{%
+  \expandafter\pi@newwhile_create
+    \pi@temp{##1##2##3##4##5##6##7}{{##1}{##2}{##3}{##4}{##5}{##6}{##7}}{{#1}{#2}{#3}{#4}{#5}{#6}{#7}}\gobblesevenand}
+\long\def\pi@newwhile_geteight#1#2#3#4#5#6#7#8{%
+  \expandafter\pi@newwhile_create
+    \pi@temp{##1##2##3##4##5##6##7##8}{{##1}{##2}{##3}{##4}{##5}{##6}{##7}{##8}}{{#1}{#2}{#3}{#4}{#5}{#6}{#7}{#8}}\gobbleeightand}
+\long\def\pi@newwhile_getnine#1#2#3#4#5#6#7#8#9{%
+  \expandafter\pi@newwhile_create
+    \pi@temp{##1##2##3##4##5##6##7##8##9}{{##1}{##2}{##3}{##4}{##5}{##6}{##7}{##8}{##9}}{{#1}{#2}{#3}{#4}{#5}{#6}{#7}{#8}{#9}}\gobblenineand}
+%
+% 
+% \newwhile\foo<n><trans_1><trans_2>...<trans_n><body>
+% 
+% Below:
+% #1 = \foo
+% #2 = ##1##2...##n
+% #3 = {##1}{##2}...{##n}
+% #4 = <trans_1><trans_2>...<trans_n>
+% #5 = \gobble<n>and
+% #6 = <body>
+%
+% ... so that \foo (#1) takes <n> arguments (#2), executes <body> (#6),
+% and runs its internal version (...newhile_userdefined...) on these same arguments
+% properly braced (#3). This internal version takes of course <n> arguments
+% and returns \foo with the arguments transformed (#4).
+% ..._preloop and ..._markloop are just markers, although the is equivalent to \usecs
+% so as to launch the following macro.
+%
+\long\def\pi@newwhile_create#1#2#3#4#5#6{%
+  \long\def#1#2{%
+    #6\pi@newwhile_preloop\pi@newwhile_markloop{pi@newwhile_userdefined:\commandtoname#1}#3%
+    }%
+  \long\defcs{pi@newwhile_userdefined:\commandtoname#1}#2{#1#4}%
+  \long\defcs{changewhile@pi@newwhile_userdefined:\commandtoname#1}#2{\pi@gobbletoterminator{#5{#1#3}}}%
+  \letcs{breakwhile@pi@newwhile_userdefined:\commandtoname#1}#5%
+  }
+%
+\let\pi@newwhile_preloop\emptycs
+\let\pi@newwhile_markloop\usecs
+\long\def\changewhile#1\pi@newwhile_markloop#2{%
+  \usecs{changewhile@#2}#1\pi@terminator
+  }
+\long\def\breakwhile#1#2\pi@newwhile_markloop#3{%
+  \usecs{breakwhile@#3}{#1}%
+  }
+%
+%
+%
+%
+% CATCODE SETTINGS
+%
+\pdef\setcatcodes#1{%
+  \ifsuffix,{#1}{\pi@setcatcodes_loop{#1}}
+                {\pi@setcatcodes_loop{#1,}}%
+  }
+\def\restorecatcodes{%
+  \def\restorecatcodes{}%
+  }
+\def\pi@setcatcodes_loop#1{%
+  \dofor{#1}##1=##2,{%
+    \dofor{##1}####1{%
+      \ifemptycommand\restorecatcodes
+              {\def\restorecatcodes{\def\restorecatcodes{}}}%
+              {}%
+      \eaddright\restorecatcodes{%
+        \catcode`\noexpand####1=\the\catcode`####1\relax}%
+      \catcode`####1=##2\relax}{}}{}%
+  }
+%
+%
+%
+%
+% STRINGS
+%
+\let\pi@thisisjustanemptystring_donottouchit\relax
+\pi@ifdef_simple\ifemptystring{\ifcsname pi@thisisjustanemptystring_donottouchit\detokenize{#1}\endcsname}
+%
+\pi@ifdef_twoarg\ifstring{%
+  \passcs\gobbleone{pi@ifstring_string\detokenize{#1:#1}}%
+  \ifcs{pi@ifstring_string\detokenize{#1:#2}}
+  }
+%
+\long\pdef\newstring#1{%
+  \long\gdefcs{pi@strings_ifprefix:\detokenize{#1}}##1#1##2\pi@terminator{%
+    \ifemptystring{##1}\firstoftwo\secondoftwo}%
+  \long\gdefcs{pi@strings_removeprefix:\detokenize{#1}}#1##1\pi@terminator{##1}%
+  \long\gdefcs{pi@strings_removeprefixand:\detokenize{#1}}#1##1\pi@terminator##2{##2{##1}}%
+%
+  \long\gdefcs{pi@strings_ifsuffix:\detokenize{#1}}##1#1\pi@terminator##2\pi@terminator{%
+    \ifemptystring{##2}\secondoftwo{\pi@gobbletoterminator\firstoftwo}}%
+  \long\gdefcs{pi@strings_removesuffix:\detokenize{#1}}##1#1\pi@terminator{##1}%
+  \long\gdefcs{pi@strings_removesuffixand:\detokenize{#1}}##1#1\pi@terminator##2{##2{##1}}%
+%
+  \long\gdefcs{pi@strings_ifcontains:\detokenize{#1}}##1#1##2\pi@terminator{%
+    \ifemptystring{##2}\secondoftwo\firstoftwo}%
+  \long\gdefcs{pi@strings_splitstring:\detokenize{#1}}##1#1##2\pi@terminator##3{%
+    ##3{##1}{##2}}%
+  }
+%
+\pi@ifdef_twoarg\ifprefix{%
+  \ifemptystring{#1}\firstoftwo
+                    {\ifcs{pi@strings_ifprefix:\detokenize{#1}}
+                          {\usecs{pi@strings_ifprefix:\detokenize{#1}}#2#1\pi@terminator}
+                          {\long\def\pi@temp##1#1##2\pi@terminator{\ifemptystring{##1}\firstoftwo\secondoftwo}%
+                           \pi@temp#2#1\pi@terminator}}
+  }
+%
+\pi@ifdef_twoarg\ifsuffix{%
+  \ifemptystring{#1}\firstoftwo % An empty string is always a suffix. And it'd ruin the test.
+                    {\ifcs{pi@strings_ifsuffix:\detokenize{#1}}
+                          {\usecs{pi@strings_ifsuffix:\detokenize{#1}}#2\pi@terminator#1\pi@terminator\pi@terminator}
+                          {\long\def\pi@temp##1#1\pi@terminator##2\pi@terminator{\ifemptystring{##2}\secondoftwo{\pi@gobbletoterminator\firstoftwo}}%
+                           \pi@temp#2\pi@terminator#1\pi@terminator\pi@terminator}}
+  }
+%
+\pi@ifdef_twoarg\ifcontains{%
+  \ifemptystring{#1}\firstoftwo
+                    {\ifcs{pi@strings_ifcontains:\detokenize{#1}}
+                          {\usecs{pi@strings_ifcontains:\detokenize{#1}}#2#1\pi@terminator}
+                          {\long\def\pi@temp##1#1##2\pi@terminator{\ifemptystring{##2}\secondoftwo\firstoftwo}%
+                           \pi@temp#2#1\pi@terminator}}
+  }
+%
+\long\def\removeprefix#1#2{%
+  \ifcs{pi@strings_removeprefix:\detokenize{#1}}
+       {\usecs{pi@strings_removeprefix:\detokenize{#1}}#2\pi@terminator}
+       {\long\def\pi@temp#1##1\pi@terminator{##1}%
+        \pi@temp#2\pi@terminator}%
+  }
+\long\def\removeprefixand#1#2#3{%
+  \ifcs{pi@strings_removeprefixand:\detokenize{#1}}
+       {\usecs{pi@strings_removeprefixand:\detokenize{#1}}#2\pi@terminator{#3}}
+       {\long\def\pi@temp#1##1\pi@terminator{#3{##1}}%
+        \pi@temp#2\pi@terminator}%
+  }
+\long\pdef\removeprefixin#1#2#3{%
+  \long\def\pi@temp#1##1\pi@terminator{\def#3{##1}}%
+  \pi@temp#2\pi@terminator
+  }
+%
+\long\def\removesuffix#1#2{%
+  \ifcs{pi@strings_removesuffix:\detokenize{#1}}
+       {\usecs{pi@strings_removesuffix:\detokenize{#1}}#2\pi@terminator}
+       {\long\def\pi@temp##1#1\pi@terminator{##1}%
+        \pi@temp#2\pi@terminator}%
+  }
+\long\def\removesuffixand#1#2#3{%
+  \ifcs{pi@strings_removesuffixand:\detokenize{#1}}
+       {\usecs{pi@strings_removesuffixand:\detokenize{#1}}#2\pi@terminator{#3}}
+       {\long\def\pi@temp##1#1\pi@terminator{#3{##1}}%
+        \pi@temp#2\pi@terminator}%
+  }
+\long\pdef\removesuffixin#1#2#3{%
+  \long\def\pi@temp##1#1\pi@terminator{\def#3{##1}}%
+  \pi@temp#2\pi@terminator
+  }
+%
+\long\def\splitstring#1#2#3{%
+  \ifcs{pi@strings_splitstring:\detokenize{#1}}
+       {\usecs{pi@strings_splitstring:\detokenize{#1}}#2\pi@terminator{#3}}
+       {\long\def\pi@temp##1#1##2\pi@terminator{#3{##1}{##2}}%
+        \pi@temp#2\pi@terminator}%
+  }
+%
+%
+%
+%
+% TRIMMING 
+% (adapted from Will Robertson's trimspace)
+%
+\long\def\passtrimleft#1#2{%
+  \expandafter\swaprightbraced\expandafter{\romannumeral-`\.\noexpand#1}{#2}%
+  }
+\def\trimleft#1{%
+  \passtrimleft{#1}\unbrace
+  }
+\bgroup
+\catcode`\Q=3
+\long\gdef\passtrimright#1{%
+  \pi@passtrimright_first#1Q Q%
+  }%
+\long\gdef\pi@passtrimright_first#1 Q{%
+  \pi@passtrimright_second#1Q%
+  }
+\long\gdef\pi@passtrimright_second#1Q#2#3{%
+  #3{#1}%
+  }
+\egroup
+\def\trimright#1{%
+  \passtrimright{#1}\unbrace
+  }
+\long\def\passtrim#1{%
+  \passtrimleft{#1}\passtrimright
+  }
+\def\trim#1{%
+  \passtrim{#1}\unbrace
+  }
+\long\pdef\deftrimleft#1#2{%
+  \passtrimleft{#2}{\def#1}
+  }
+\long\pdef\deftrimright#1#2{%
+  \passtrimright{#2}{\def#1}
+  }
+\long\pdef\deftrim#1#2{%
+  \passtrim{#2}{\def#1}%
+  }
+
+\pi@restorecatcodes
+\endinput
\ No newline at end of file
diff --git a/Master/tlpkg/bin/tlpkg-ctan-check b/Master/tlpkg/bin/tlpkg-ctan-check
index bd3627b89a1..9e1eced71cb 100755
--- a/Master/tlpkg/bin/tlpkg-ctan-check
+++ b/Master/tlpkg/bin/tlpkg-ctan-check
@@ -302,7 +302,7 @@ my @TLP_working = qw(
     tamethebeast tapir tdclock tdsfrmath
     technics ted templates-fenn templates-sommer tengwarscript
     tensor termcal termlist teubner
-    tex-ewd tex-font-errors-cheatsheet tex-gyre tex-label texcount
+    tex-ewd tex-font-errors-cheatsheet tex-gyre tex-label texapi texcount
     texdiff texdirflatten texilikechaps texilikecover
     texloganalyser texmate texments
     texpower texshade
@@ -339,7 +339,7 @@ my @TLP_working = qw(
     xkeyval xlop xltxtra xmpincl xnewcommand xoptarg xpackages
     xq xskak xstring xtab xtcapts xunicode
     xwatermark xyling xypdf xypic xypic-tut-pt xytree
-  yagusylo ydoc york-thesis youngtab yplan
+  yagusylo yax ydoc york-thesis youngtab yplan
   zed-csp zefonts ziffer zhmetrics zhspacing zwgetfdate zwpagelayout
 ); 
 
diff --git a/Master/tlpkg/libexec/ctan2tds b/Master/tlpkg/libexec/ctan2tds
index 88082cc36f7..12900331313 100755
--- a/Master/tlpkg/libexec/ctan2tds
+++ b/Master/tlpkg/libexec/ctan2tds
@@ -985,6 +985,7 @@ $standardtex='\.(.bx|cfg|sty|clo|ldf|cls|def|fd|cmap|4ht)$';
  'tabto-generic','tabto.tex',
  'taylor',	'diagrams.tex',
  'tex-ewd',	'dotnot.tex',
+ 'texapi',	'texapi\.tex',
  'texsis',	'\.txs|TXS.*tex|texsis.tex',
  'thesis-titlepage-fhac',	'LOGO.*|' . $standardtex,
  'threeparttable',	'^..[^s].*\.sty', # not miscdoc.sty
diff --git a/Master/tlpkg/tlpsrc/collection-genericextra.tlpsrc b/Master/tlpkg/tlpsrc/collection-genericextra.tlpsrc
index bc3591c8cb6..a9e350d80b0 100644
--- a/Master/tlpkg/tlpsrc/collection-genericextra.tlpsrc
+++ b/Master/tlpkg/tlpsrc/collection-genericextra.tlpsrc
@@ -26,6 +26,7 @@ depend ofs
 depend pdf-trans
 depend shade
 depend tabto-generic
+depend texapi
 depend vrb
 depend vtex
 depend xlop
diff --git a/Master/tlpkg/tlpsrc/texapi.tlpsrc b/Master/tlpkg/tlpsrc/texapi.tlpsrc
new file mode 100644
index 00000000000..e69de29bb2d
--- /dev/null
+++ b/Master/tlpkg/tlpsrc/texapi.tlpsrc