association-matrix (25oct20)

git-svn-id: svn://tug.org/texlive/trunk@56759 c570f23f-e606-0410-a88d-b1316a301751

9 files changed, 1150 insertions, 1 deletions

diff --git a/Master/texmf-dist/doc/latex/association-matrix/DEPENDS.txt b/Master/texmf-dist/doc/latex/association-matrix/DEPENDS.txt
new file mode 100644
index 00000000000..1f65d892c32
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/association-matrix/DEPENDS.txt
@@ -0,0 +1,5 @@
+hard etoolbox
+hard forloop
+hard ifthen
+hard textcomp
+hard xparse
diff --git a/Master/texmf-dist/doc/latex/association-matrix/LICENCE b/Master/texmf-dist/doc/latex/association-matrix/LICENCE
new file mode 100644
index 00000000000..f8b699e6eb5
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/association-matrix/LICENCE
@@ -0,0 +1,415 @@
+The LaTeX Project Public License
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+
+LPPL Version 1.3c  2008-05-04
+
+Copyright 1999 2002-2008 LaTeX3 Project
+    Everyone is allowed to distribute verbatim copies of this
+    license document, but modification of it is not allowed.
+
+
+PREAMBLE
+========
+
+The LaTeX Project Public License (LPPL) is the primary license under
+which the LaTeX kernel and the base LaTeX packages are distributed.
+
+You may use this license for any work of which you hold the copyright
+and which you wish to distribute.  This license may be particularly
+suitable if your work is TeX-related (such as a LaTeX package), but
+it is written in such a way that you can use it even if your work is
+unrelated to TeX.
+
+The section `WHETHER AND HOW TO DISTRIBUTE WORKS UNDER THIS LICENSE',
+below, gives instructions, examples, and recommendations for authors
+who are considering distributing their works under this license.
+
+This license gives conditions under which a work may be distributed
+and modified, as well as conditions under which modified versions of
+that work may be distributed.
+
+We, the LaTeX3 Project, believe that the conditions below give you
+the freedom to make and distribute modified versions of your work
+that conform with whatever technical specifications you wish while
+maintaining the availability, integrity, and reliability of
+that work.  If you do not see how to achieve your goal while
+meeting these conditions, then read the document `cfgguide.tex'
+and `modguide.tex' in the base LaTeX distribution for suggestions.
+
+
+DEFINITIONS
+===========
+
+In this license document the following terms are used:
+
+   `Work'
+    Any work being distributed under this License.
+
+   `Derived Work'
+    Any work that under any applicable law is derived from the Work.
+
+   `Modification'
+    Any procedure that produces a Derived Work under any applicable
+    law -- for example, the production of a file containing an
+    original file associated with the Work or a significant portion of
+    such a file, either verbatim or with modifications and/or
+    translated into another language.
+
+   `Modify'
+    To apply any procedure that produces a Derived Work under any
+    applicable law.
+
+   `Distribution'
+    Making copies of the Work available from one person to another, in
+    whole or in part.  Distribution includes (but is not limited to)
+    making any electronic components of the Work accessible by
+    file transfer protocols such as FTP or HTTP or by shared file
+    systems such as Sun's Network File System (NFS).
+
+   `Compiled Work'
+    A version of the Work that has been processed into a form where it
+    is directly usable on a computer system.  This processing may
+    include using installation facilities provided by the Work,
+    transformations of the Work, copying of components of the Work, or
+    other activities.  Note that modification of any installation
+    facilities provided by the Work constitutes modification of the Work.
+
+   `Current Maintainer'
+    A person or persons nominated as such within the Work.  If there is
+    no such explicit nomination then it is the `Copyright Holder' under
+    any applicable law.
+
+   `Base Interpreter'
+    A program or process that is normally needed for running or
+    interpreting a part or the whole of the Work.
+
+    A Base Interpreter may depend on external components but these
+    are not considered part of the Base Interpreter provided that each
+    external component clearly identifies itself whenever it is used
+    interactively.  Unless explicitly specified when applying the
+    license to the Work, the only applicable Base Interpreter is a
+    `LaTeX-Format' or in the case of files belonging to the
+    `LaTeX-format' a program implementing the `TeX language'.
+
+
+
+CONDITIONS ON DISTRIBUTION AND MODIFICATION
+===========================================
+
+1.  Activities other than distribution and/or modification of the Work
+are not covered by this license; they are outside its scope.  In
+particular, the act of running the Work is not restricted and no
+requirements are made concerning any offers of support for the Work.
+
+2.  You may distribute a complete, unmodified copy of the Work as you
+received it.  Distribution of only part of the Work is considered
+modification of the Work, and no right to distribute such a Derived
+Work may be assumed under the terms of this clause.
+
+3.  You may distribute a Compiled Work that has been generated from a
+complete, unmodified copy of the Work as distributed under Clause 2
+above, as long as that Compiled Work is distributed in such a way that
+the recipients may install the Compiled Work on their system exactly
+as it would have been installed if they generated a Compiled Work
+directly from the Work.
+
+4.  If you are the Current Maintainer of the Work, you may, without
+restriction, modify the Work, thus creating a Derived Work.  You may
+also distribute the Derived Work without restriction, including
+Compiled Works generated from the Derived Work.  Derived Works
+distributed in this manner by the Current Maintainer are considered to
+be updated versions of the Work.
+
+5.  If you are not the Current Maintainer of the Work, you may modify
+your copy of the Work, thus creating a Derived Work based on the Work,
+and compile this Derived Work, thus creating a Compiled Work based on
+the Derived Work.
+
+6.  If you are not the Current Maintainer of the Work, you may
+distribute a Derived Work provided the following conditions are met
+for every component of the Work unless that component clearly states
+in the copyright notice that it is exempt from that condition.  Only
+the Current Maintainer is allowed to add such statements of exemption
+to a component of the Work.
+
+  a. If a component of this Derived Work can be a direct replacement
+     for a component of the Work when that component is used with the
+     Base Interpreter, then, wherever this component of the Work
+     identifies itself to the user when used interactively with that
+     Base Interpreter, the replacement component of this Derived Work
+     clearly and unambiguously identifies itself as a modified version
+     of this component to the user when used interactively with that
+     Base Interpreter.
+
+  b. Every component of the Derived Work contains prominent notices
+     detailing the nature of the changes to that component, or a
+     prominent reference to another file that is distributed as part
+     of the Derived Work and that contains a complete and accurate log
+     of the changes.
+
+  c. No information in the Derived Work implies that any persons,
+     including (but not limited to) the authors of the original version
+     of the Work, provide any support, including (but not limited to)
+     the reporting and handling of errors, to recipients of the
+     Derived Work unless those persons have stated explicitly that
+     they do provide such support for the Derived Work.
+
+  d. You distribute at least one of the following with the Derived Work:
+
+       1. A complete, unmodified copy of the Work;
+          if your distribution of a modified component is made by
+          offering access to copy the modified component from a
+          designated place, then offering equivalent access to copy
+          the Work from the same or some similar place meets this
+          condition, even though third parties are not compelled to
+          copy the Work along with the modified component;
+
+       2. Information that is sufficient to obtain a complete,
+          unmodified copy of the Work.
+
+7.  If you are not the Current Maintainer of the Work, you may
+distribute a Compiled Work generated from a Derived Work, as long as
+the Derived Work is distributed to all recipients of the Compiled
+Work, and as long as the conditions of Clause 6, above, are met with
+regard to the Derived Work.
+
+8.  The conditions above are not intended to prohibit, and hence do not
+apply to, the modification, by any method, of any component so that it
+becomes identical to an updated version of that component of the Work as
+it is distributed by the Current Maintainer under Clause 4, above.
+
+9.  Distribution of the Work or any Derived Work in an alternative
+format, where the Work or that Derived Work (in whole or in part) is
+then produced by applying some process to that format, does not relax or
+nullify any sections of this license as they pertain to the results of
+applying that process.
+
+10. a. A Derived Work may be distributed under a different license
+       provided that license itself honors the conditions listed in
+       Clause 6 above, in regard to the Work, though it does not have
+       to honor the rest of the conditions in this license.
+
+    b. If a Derived Work is distributed under a different license, that
+       Derived Work must provide sufficient documentation as part of
+       itself to allow each recipient of that Derived Work to honor the
+       restrictions in Clause 6 above, concerning changes from the Work.
+
+11. This license places no restrictions on works that are unrelated to
+the Work, nor does this license place any restrictions on aggregating
+such works with the Work by any means.
+
+12.  Nothing in this license is intended to, or may be used to, prevent
+complete compliance by all parties with all applicable laws.
+
+
+NO WARRANTY
+===========
+
+There is no warranty for the Work.  Except when otherwise stated in
+writing, the Copyright Holder provides the Work `as is', without
+warranty of any kind, either expressed or implied, including, but not
+limited to, the implied warranties of merchantability and fitness for a
+particular purpose.  The entire risk as to the quality and performance
+of the Work is with you.  Should the Work prove defective, you assume
+the cost of all necessary servicing, repair, or correction.
+
+In no event unless required by applicable law or agreed to in writing
+will The Copyright Holder, or any author named in the components of the
+Work, or any other party who may distribute and/or modify the Work as
+permitted above, be liable to you for damages, including any general,
+special, incidental or consequential damages arising out of any use of
+the Work or out of inability to use the Work (including, but not limited
+to, loss of data, data being rendered inaccurate, or losses sustained by
+anyone as a result of any failure of the Work to operate with any other
+programs), even if the Copyright Holder or said author or said other
+party has been advised of the possibility of such damages.
+
+
+MAINTENANCE OF THE WORK
+=======================
+
+The Work has the status `author-maintained' if the Copyright Holder
+explicitly and prominently states near the primary copyright notice in
+the Work that the Work can only be maintained by the Copyright Holder
+or simply that it is `author-maintained'.
+
+The Work has the status `maintained' if there is a Current Maintainer
+who has indicated in the Work that they are willing to receive error
+reports for the Work (for example, by supplying a valid e-mail
+address). It is not required for the Current Maintainer to acknowledge
+or act upon these error reports.
+
+The Work changes from status `maintained' to `unmaintained' if there
+is no Current Maintainer, or the person stated to be Current
+Maintainer of the work cannot be reached through the indicated means
+of communication for a period of six months, and there are no other
+significant signs of active maintenance.
+
+You can become the Current Maintainer of the Work by agreement with
+any existing Current Maintainer to take over this role.
+
+If the Work is unmaintained, you can become the Current Maintainer of
+the Work through the following steps:
+
+ 1.  Make a reasonable attempt to trace the Current Maintainer (and
+     the Copyright Holder, if the two differ) through the means of
+     an Internet or similar search.
+
+ 2.  If this search is successful, then enquire whether the Work
+     is still maintained.
+
+  a. If it is being maintained, then ask the Current Maintainer
+     to update their communication data within one month.
+
+  b. If the search is unsuccessful or no action to resume active
+     maintenance is taken by the Current Maintainer, then announce
+     within the pertinent community your intention to take over
+     maintenance.  (If the Work is a LaTeX work, this could be
+     done, for example, by posting to comp.text.tex.)
+
+ 3a. If the Current Maintainer is reachable and agrees to pass
+     maintenance of the Work to you, then this takes effect
+     immediately upon announcement.
+
+  b. If the Current Maintainer is not reachable and the Copyright
+     Holder agrees that maintenance of the Work be passed to you,
+     then this takes effect immediately upon announcement.
+
+ 4.  If you make an `intention announcement' as described in 2b. above
+     and after three months your intention is challenged neither by
+     the Current Maintainer nor by the Copyright Holder nor by other
+     people, then you may arrange for the Work to be changed so as
+     to name you as the (new) Current Maintainer.
+
+ 5.  If the previously unreachable Current Maintainer becomes
+     reachable once more within three months of a change completed
+     under the terms of 3b) or 4), then that Current Maintainer must
+     become or remain the Current Maintainer upon request provided
+     they then update their communication data within one month.
+
+A change in the Current Maintainer does not, of itself, alter the fact
+that the Work is distributed under the LPPL license.
+
+If you become the Current Maintainer of the Work, you should
+immediately provide, within the Work, a prominent and unambiguous
+statement of your status as Current Maintainer.  You should also
+announce your new status to the same pertinent community as
+in 2b) above.
+
+
+WHETHER AND HOW TO DISTRIBUTE WORKS UNDER THIS LICENSE
+======================================================
+
+This section contains important instructions, examples, and
+recommendations for authors who are considering distributing their
+works under this license.  These authors are addressed as `you' in
+this section.
+
+Choosing This License or Another License
+----------------------------------------
+
+If for any part of your work you want or need to use *distribution*
+conditions that differ significantly from those in this license, then
+do not refer to this license anywhere in your work but, instead,
+distribute your work under a different license.  You may use the text
+of this license as a model for your own license, but your license
+should not refer to the LPPL or otherwise give the impression that
+your work is distributed under the LPPL.
+
+The document `modguide.tex' in the base LaTeX distribution explains
+the motivation behind the conditions of this license.  It explains,
+for example, why distributing LaTeX under the GNU General Public
+License (GPL) was considered inappropriate.  Even if your work is
+unrelated to LaTeX, the discussion in `modguide.tex' may still be
+relevant, and authors intending to distribute their works under any
+license are encouraged to read it.
+
+A Recommendation on Modification Without Distribution
+-----------------------------------------------------
+
+It is wise never to modify a component of the Work, even for your own
+personal use, without also meeting the above conditions for
+distributing the modified component.  While you might intend that such
+modifications will never be distributed, often this will happen by
+accident -- you may forget that you have modified that component; or
+it may not occur to you when allowing others to access the modified
+version that you are thus distributing it and violating the conditions
+of this license in ways that could have legal implications and, worse,
+cause problems for the community.  It is therefore usually in your
+best interest to keep your copy of the Work identical with the public
+one.  Many works provide ways to control the behavior of that work
+without altering any of its licensed components.
+
+How to Use This License
+-----------------------
+
+To use this license, place in each of the components of your work both
+an explicit copyright notice including your name and the year the work
+was authored and/or last substantially modified.  Include also a
+statement that the distribution and/or modification of that
+component is constrained by the conditions in this license.
+
+Here is an example of such a notice and statement:
+
+  %% pig.dtx
+  %% Copyright 2005 M. Y. Name
+  %
+  % This work may be distributed and/or modified under the
+  % conditions of the LaTeX Project Public License, either version 1.3
+  % of this license or (at your option) any later version.
+  % The latest version of this license is in
+  %   http://www.latex-project.org/lppl.txt
+  % and version 1.3 or later is part of all distributions of LaTeX
+  % version 2005/12/01 or later.
+  %
+  % This work has the LPPL maintenance status `maintained'.
+  %
+  % The Current Maintainer of this work is M. Y. Name.
+  %
+  % This work consists of the files pig.dtx and pig.ins
+  % and the derived file pig.sty.
+
+Given such a notice and statement in a file, the conditions
+given in this license document would apply, with the `Work' referring
+to the three files `pig.dtx', `pig.ins', and `pig.sty' (the last being
+generated from `pig.dtx' using `pig.ins'), the `Base Interpreter'
+referring to any `LaTeX-Format', and both `Copyright Holder' and
+`Current Maintainer' referring to the person `M. Y. Name'.
+
+If you do not want the Maintenance section of LPPL to apply to your
+Work, change `maintained' above into `author-maintained'.
+However, we recommend that you use `maintained', as the Maintenance
+section was added in order to ensure that your Work remains useful to
+the community even when you can no longer maintain and support it
+yourself.
+
+Derived Works That Are Not Replacements
+---------------------------------------
+
+Several clauses of the LPPL specify means to provide reliability and
+stability for the user community. They therefore concern themselves
+with the case that a Derived Work is intended to be used as a
+(compatible or incompatible) replacement of the original Work. If
+this is not the case (e.g., if a few lines of code are reused for a
+completely different task), then clauses 6b and 6d shall not apply.
+
+
+Important Recommendations
+-------------------------
+
+ Defining What Constitutes the Work
+
+   The LPPL requires that distributions of the Work contain all the
+   files of the Work.  It is therefore important that you provide a
+   way for the licensee to determine which files constitute the Work.
+   This could, for example, be achieved by explicitly listing all the
+   files of the Work near the copyright notice of each file or by
+   using a line such as:
+
+    % This work consists of all files listed in manifest.txt.
+
+   in that place.  In the absence of an unequivocal list it might be
+   impossible for the licensee to determine what is considered by you
+   to comprise the Work and, in such a case, the licensee would be
+   entitled to make reasonable conjectures as to which files comprise
+   the Work.
diff --git a/Master/texmf-dist/doc/latex/association-matrix/README.md b/Master/texmf-dist/doc/latex/association-matrix/README.md
new file mode 100644
index 00000000000..221403ab8b3
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/association-matrix/README.md
@@ -0,0 +1,11 @@
+# *association-matrix*: LaTeX support for creating association matrices
+
+The `association-matrix` package allow the creation of association matrices in an clear and concise fashion, without having to deal with manually generating and modifying the tables while working.
+By simply specifying the rows and the columns by their unique identifier, and then set which cells should be marked as associated.
+Then, the `\amxgenerate` command generates a table that is similar in nature to:
+
+
+|  Thesis name             | [1] | [2] | [3] |
+|:-------------------------|:---:|:---:|:---:|
+| 1. Awesome thesis        |  •  |  •  |     |
+| 2. The Standard Model    |     |  •  |  •  |
diff --git a/Master/texmf-dist/doc/latex/association-matrix/association-matrix.pdf b/Master/texmf-dist/doc/latex/association-matrix/association-matrix.pdf
new file mode 100644
index 00000000000..fe97c4b9719
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/association-matrix/association-matrix.pdf
diff --git a/Master/texmf-dist/doc/latex/association-matrix/association-matrix.tex b/Master/texmf-dist/doc/latex/association-matrix/association-matrix.tex
new file mode 100644
index 00000000000..bea65f80ced
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/association-matrix/association-matrix.tex
@@ -0,0 +1,344 @@
+%% association-matrix.sty
+%% Copyright 2020 Whisperity
+%
+% This work may be distributed and/or modified under the
+% conditions of the LaTeX Project Public License, either version 1.3c
+% of this license or (at your option) any later version.
+% The latest version of this license is in
+%   http://www.latex-project.org/lppl.txt
+% and version 1.3c or later is part of all distributions of LaTeX
+% version 2008/05/04 or later.
+%
+% This work has the LPPL maintenance status `maintained'.
+%
+% The Current Maintainer of this work is Whisperity.
+%
+% This work consists of the files association-matrix.sty
+% and association-matrix.tex.
+%
+\documentclass{article}
+\usepackage{association-matrix} % Own package! :3
+
+\usepackage{etoolbox}
+\usepackage{hyperref}
+    \hypersetup{
+        pdftitle={The 'association-matrix' Package},    % title
+        pdfauthor={Whisperity},     % author
+        pdfsubject={An easy and clear assocation matrix generator},   % subject of the document
+        pdfnewwindow=true,      % links in new window
+        hidelinks,              % disable link borders
+        %colorlinks=false,       % false: boxed links; true: colored links
+    }
+\usepackage[capitalize]{cleveref}
+\usepackage{minted}
+    \usemintedstyle{borland}
+    \setminted{autogobble}
+\usepackage{xcolor}
+
+\newrobustcmd{\release}[3]{%
+    \subsection{\emph{#1}: \texttt{#2} - #3}\label{release-#2}%
+}
+
+\newrobustcmd{\command}[3]{%
+    \paragraph{\textsf{#1}} \textbf{\color{blue} \texttt{#2}}
+
+    #3
+}
+
+% Turn off the execution of \amxgenerate.
+% This is used internally in the document to prevent code examples from firing the matrix when loaded.
+\newrobustcmd{\amxDisable}{%
+    \let\theOldAMX\amxgenerate%
+    \def\amxgenerate{}%
+}
+\newrobustcmd{\amxEnable}{%
+    \let\amxgenerate\theOldAMX
+}
+
+% Escaped special characters for \texttt and the \write calls.
+% (via http://tex.stackexchange.com/a/223089)
+\def\atchar#1{}
+\edef\atchar{\expandafter\atchar\string\@}
+\def\bslchar#1{}
+\edef\bslchar{\expandafter\bslchar\string\\}
+\def\spchar#1{}
+\edef\spchar{\expandafter\spchar\string\ }
+\def\lbchar#1{}
+\edef\lbchar{\expandafter\lbchar\string\{}
+\def\rbchar#1{}
+\edef\rbchar{\expandafter\rbchar\string\}}
+\def\hschar#1{}
+\edef\hschar{\expandafter\hschar\string\#}
+
+\newwrite\tempfile
+
+\begin{document}
+
+\vspace*{0in}
+\begin{center}
+    \LARGE The \textsf{association-matrix} Package \\
+    \small \rule{0in}{1em} An easy and clear association matrix generator \\
+    \large \rule{0in}{2em} Whisperity \\
+    % \\
+    \rule{0em}{2em}\amxDate \\
+    Version \amxVersion
+\end{center}
+
+\tableofcontents
+
+
+\section{Introduction}\label{intro}
+The \textsf{association-matrix} package allows the convenient creation of association matrices.
+The package aims to automate the generation, without the user having to manually write the table's code and have to deal with the inefficiency of copy-pasting information.
+The package's interface is simple, the user needs to define the table's contents (\cref{define}) and then can generate the table (\cref{tablegen}).
+
+Note that it is important to have \emph{every} necessary row entries and column headings defined \textbf{before} the first call to a table generation, otherwise, only a partial table will be generated.
+
+\subsection{Association matrix}\label{association-mx}
+At the author's University, it is customary for Ph.D.\ students to write their doctoral dissertation organised into individual \emph{theses} (corresponding to chapters), and to provide a breakdown on which of their publications are ``proof'' behind the thesis (chapter).
+Originally, the package \textsc{theses-vs-publications} had been devised, but then we turned it to a more generic solution.
+
+Commonly, the dissertation's \emph{``Introduction''} and \emph{``Summary''} chapters will provide the full table.
+In addition, at the end of each individual thesis chapters will provide a table with the current thesis's row in the table \emph{highlighted}.
+
+An example usage and association matrix is provided in \cref{example}.
+
+\subsection{Licence}
+Copyright \textcopyright\ 2020 Whisperity.
+Permission is granted to copy, distribute and\slash or modify this software under the terms of the \emph{\LaTeX{} Project Public License}, version \emph{1.3c} or newer.\footnote{%
+    \url{http://www.latex-project.org/lppl}%
+}
+
+\subsection{Example}\label{example}
+The definitions (\cref{define}) should be done early in the document, but at least before the first table render (\cref{tablegen}) call.
+
+\immediate\openout\tempfile=assoc-mx-example.aux
+    \immediate\write\tempfile{\bslchar amxrow{association-matrix}{Association Matrices}}
+    \immediate\write\tempfile{\bslchar amxrow{latex}{\bslchar LaTeX}}
+    \immediate\write\tempfile{}
+    \makeatletter
+       \immediate\write\tempfile{\@percentchar\spchar Using the bibliography at the end of document!}
+    \makeatother
+    \immediate\write\tempfile{\bslchar amxcol{amxdoc}{\bslchar cite{associationmatrix}}}
+    \immediate\write\tempfile{\bslchar amxcol{latexdoc}{\bslchar cite{latex}}}
+    \immediate\write\tempfile{\bslchar amxcol{etoolboxdoc}{\bslchar cite{etoolbox}}}
+    \immediate\write\tempfile{}
+    \immediate\write\tempfile{\bslchar amxassociate{amxdoc}{association-matrix}}
+    \immediate\write\tempfile{\bslchar amxassociate{etoolboxdoc}{association-matrix}}
+    \immediate\write\tempfile{\bslchar amxassociate{latexdoc}{latex}}
+    \immediate\write\tempfile{\bslchar amxassociate{etoolboxdoc}{latex}}
+    \immediate\write\tempfile{}
+    \immediate\write\tempfile{\detokenize{\amxgenerate}}
+\immediate\closeout\tempfile
+
+\amxDisable
+\input{assoc-mx-example.aux}
+\amxEnable
+\begin{figure}[H]
+    \centering
+    \inputminted{latex}{assoc-mx-example.aux}
+    \amxgenerate
+\end{figure}
+
+\clearpage
+\section{Commands}\label{commands}
+\subsection{Registering entries}\label{define}
+
+\command{amxrow}{\bslchar amxrow\lbchar <key>\rbchar\lbchar <text>\rbchar}{%
+Registers the row entry named \texttt{<key>} with the given \texttt{<text>}.
+The \emph{title} of the entry is printed in the first cell of the row, \textbf{in the order of} \texttt{\bslchar amxrow} calls.
+}
+
+\command{amxcol}{\bslchar amxcol\lbchar <key>\rbchar\lbchar <text>\rbchar}{%
+Registers the column named \texttt{<key>} with the given \texttt{<text>}.
+The contents of \emph{body} is printed as the column headings of the table, \textbf{in the order of} \texttt{\bslchar amxcol} calls.
+}
+
+\command{amxassociate}{\bslchar amxassociate\lbchar <col-key>\rbchar\lbchar <row-key>\rbchar}{%
+Registers the association between \texttt{<col-key>} and \texttt{<row-key>}.
+The cells at the intersection of the row and the column will have a \textbullet{}, indicating the relevancy.
+}
+
+\subsection{Queries}\label{query}
+
+\command{amxrows}{\bslchar amxrows}{%
+    Returns the number of rows defined.
+}
+
+\command{amxcols}{\bslchar amxcols}{%
+    Returns the number of columns defined.
+}
+
+\command{amxrowtext}{\bslchar amxrowtext\lbchar <key>\rbchar}{%
+    Returns the registered \emph{text} for the \textbf{row} registered with \texttt{<key>}.
+}
+
+\command{amxcoltext}{\bslchar amxcoltext\lbchar <key>\rbchar}{%
+        Returns the registered \emph{text} for the \textbf{column} registered with \texttt{<key>}.
+}
+
+\subsection{Table generator: \texttt{amxgenerate}}\label{tablegen}
+
+\command{amxgenerate}{\bslchar amxgenerate[<row>]}{%
+    Generates the full table incorporating the previously registered data.
+    Internally, a \texttt{tabular} environment is created with the table's data generated by the package.
+    It is the user's responsibility to wrap this into a floating \texttt{table}, if they so wish.
+    
+    If \texttt{[<row>]} is given a row's \emph{key}, the row for that key will be \textbf{highlighted}.
+    Highlighting is done by typesetting the row's \emph{text} in \textbf{bold face}, and changing every \textbullet{} in the \emph{other} rows to \textopenbullet{}.
+    
+    \begin{figure}[H]
+        \centering
+        \amxgenerate[latex]
+    \end{figure}
+}
+
+
+% Let's use an example of 2×2 matrix for the customisations.
+\newcommand{\docExampleResetTableTwoByTwo}{%
+    \amxReset%
+    \amxrow{sample}{Sample}%
+    \amxrow{simple}{Simple}%
+    \amxcol{x}{x}%
+    \amxcol{y}{y}%
+    \amxassociate{x}{sample}%
+    \amxassociate{y}{simple}%
+}
+\newcommand{\loadAndRenderResettingExample}[2][0]{%
+    \begin{figure}[H]
+        \centering
+        \inputminted{latex}{#2}
+
+        \docExampleResetTableTwoByTwo
+        \input{#2}
+        \amxgenerate[#1]
+    \end{figure}%
+}
+
+\subsection{Customisation}\label{customise}
+All aspects on how the individual elements in the table are rendered can be customised by setting \emph{renderer} control sequences.
+
+\makeatletter
+    \def\defaultTopCorner{\amx@Renderer@Default@TopCorner}
+\makeatother
+\command{amxsetTopCorner}{\bslchar amxsetTopCorner\lbchar <new-heading>\rbchar}{%
+    Sets the rendered table's top left cell value (by default, ``\emph{\defaultTopCorner}'') to the given \texttt{<new-heading>} value.
+
+    \immediate\openout\tempfile=settopcorner-example.aux
+        \immediate\write\tempfile{\bslchar amxsetTopCorner{Correlations}}
+    \immediate\closeout\tempfile
+    \loadAndRenderResettingExample{settopcorner-example.aux}
+}
+
+\command{amxsetColumnHeading}{\bslchar amxsetColumnHeading\lbchar<render-command>\rbchar}{%
+    Sets the rendered table's top row's cells to be rendered via passing the column heading's text (see \cref{query}) to the given \texttt{<render-command>}.
+    This command must be a command that takes \textbf{1} argument, defined by the user earlier.
+
+    \immediate\openout\tempfile=setcolheading-example.aux
+        \immediate\write\tempfile{\bslchar newcommand{\bslchar ttColHead}[1]{\bslchar texttt{\hschar1}}}
+        \immediate\write\tempfile{\bslchar amxsetColumnHeading{\bslchar ttColHead}}
+    \immediate\closeout\tempfile
+    \loadAndRenderResettingExample{setcolheading-example.aux}
+}
+
+\command{amxsetRowFormat}{\bslchar amxsetRowFormat(Highlighted)\lbchar<render-command>\rbchar}{%
+    Sets the rendered table's left cells' to be rendered via passing the row's index and text (see \cref{query}) to the given \texttt{<render-command>}.
+    This command must be a command that takes \textbf{2} arguments, defined by the user earlier.
+    The \texttt{Highlighted} version sets the renderer for the highlighted row, if highlighted rendering (see \cref{tablegen}) is done.
+
+    \immediate\openout\tempfile=setrowformat-example.aux
+        \immediate\write\tempfile{\bslchar newcommand{\bslchar parenRow}[2]{(\hschar1) \bslchar emph{\hschar2}}}
+        \immediate\write\tempfile{\bslchar newcommand{\bslchar parenRowBl}[2]{!\hschar1! \bslchar texttt{\hschar2}}}
+        \immediate\write\tempfile{\bslchar amxsetRowFormat{\bslchar parenRow}}
+        \immediate\write\tempfile{\bslchar amxsetRowFormatHighlighted{\bslchar parenRowBl}}
+    \immediate\closeout\tempfile
+    \loadAndRenderResettingExample[simple]{setrowformat-example.aux}
+}
+
+\clearpage
+\makeatletter
+    \def\defaultIndicator{\amx@Renderer@Default@Indicator}
+\makeatother
+\command{amxsetIndicator}{\bslchar amxsetIndicator\lbchar<indicator>\rbchar}{%
+    Sets the indicators of association in the matrix in \emph{non-highlighting} mode to the result of the \texttt{<indicator>}.
+    The default indicator is: \defaultIndicator{}.
+
+    \immediate\openout\tempfile=setindicator-example.aux
+        \immediate\write\tempfile{\bslchar amxsetIndicator{a}}
+    \immediate\closeout\tempfile
+    \loadAndRenderResettingExample{setindicator-example.aux}
+}
+
+\makeatletter
+    \def\defaultIndicatorHC{\amx@Renderer@Default@Indicator@Highlighted@Current}
+    \def\defaultIndicatorHO{\amx@Renderer@Default@Indicator@Highlighted@Other}
+\makeatother
+\command{amxsetIndicatorHighlighted}{\linebreak\bslchar amxsetIndicatorHighlighted\lbchar<hl-indicator>\rbchar\lbchar<ot-indicator>\rbchar}{%
+    Sets the indicators of association in the matrix in \emph{highlighting} mode to the result of the \texttt{<hl-indicator>} for the \textbf{highlighted row} and \texttt{<ot-indicator>} for every other row.
+    The default indicators are: \defaultIndicatorHC{} and \defaultIndicatorHO{}, respectively.
+
+    \immediate\openout\tempfile=setindicator-hl-example.aux
+        \immediate\write\tempfile{\bslchar amxsetIndicatorHighlighted{c}{o}}
+    \immediate\closeout\tempfile
+    \loadAndRenderResettingExample[simple]{setindicator-hl-example.aux}
+}
+
+\subsection{Multiple distinct tables: \texttt{amxReset}}
+
+\command{amxReset}{\bslchar amxReset}{%
+    Clears \textbf{all} internal data structures and customisations for the package, allowing the user to later typeset a different, independent matrix.
+    The previously defined entries are lost, and in case the ``previous'' matrix is needed, it must be set up again with a sequence of definition commands (see \cref{define}).
+    
+    For example, putting the code in \cref{example} and the one below into the same source file will create the smaller matrix at the second invocation of \texttt{\bslchar amxgenerate}.
+    
+    \immediate\openout\tempfile=reset-example.aux
+        \immediate\write\tempfile{\bslchar amxReset}
+        \immediate\write\tempfile{\bslchar amxrow{sample}{Sample}}
+        \immediate\write\tempfile{\bslchar amxcol{x}{x}}
+        \immediate\write\tempfile{\bslchar amxassociate{x}{sample}}
+        \immediate\write\tempfile{\detokenize{\amxgenerate}}
+    \immediate\closeout\tempfile
+    
+    \amxDisable
+    \input{reset-example.aux}
+    \amxEnable
+    
+    \begin{figure}[H]
+        \centering
+        \inputminted{latex}{reset-example.aux}
+        \amxgenerate
+    \end{figure}
+}
+
+\clearpage
+\section{Development}
+The development of \textsf{association-matrix} is done on GitHub: \url{http://github.com/whisperity/association-matrix}.
+Please report issues and submit patches here.
+
+Note that this document acts as a \textbf{test file} to the package, not only a user-facing documentation.
+Any new command or change should be supplemented with appropriate documentation, and the check of the rendered examples.
+If there is a discrepancy or regression in the looks of \emph{this document} that is not explained by the changes, it should be investigated!
+
+\section{Changelog}\label{changelog}
+\release{2020/10/25}{v1.0}{Initial release}
+\begin{itemize}
+    \item Basic functionality of defining entries, rendering tables, and customising the renderers are implemented.
+\end{itemize}
+
+\begin{thebibliography}{3}
+\bibitem{associationmatrix}
+Whisperity. \textit{The \textsf{association-matrix} Package -- An easy and clear association matrix generator}.
+Online, \url{http://ctan.org/pkg/association-matrix} (accessed 2020/10/25), 2020.
+
+\bibitem{latex} 
+Leslie B.\ Lamport, Donald E.\ Knuth et al. 
+\textit{\LaTeX{} -- A document preparation system}. 
+Online, \url{http://latex-project.org/} (accessed 2020/10/25), 1984.
+
+\bibitem{etoolbox} 
+Philipp Lehman, Joseph Wright.
+\textit{The \textsf{etoolbox} Package -- An e-\TeX{} Toolbox for Class and Package Authors}
+Online, \url{http://ctan.org/pkg/etoolbox} (accessed 2020/10/25), 2007.
+\end{thebibliography}
+
+\end{document}
diff --git a/Master/texmf-dist/tex/latex/association-matrix/association-matrix.sty b/Master/texmf-dist/tex/latex/association-matrix/association-matrix.sty
new file mode 100644
index 00000000000..07b73659b63
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/association-matrix/association-matrix.sty
@@ -0,0 +1,373 @@
+%% association-matrix.sty
+%% Copyright 2020 Whisperity
+%
+% This work may be distributed and/or modified under the
+% conditions of the LaTeX Project Public License, either version 1.3c
+% of this license or (at your option) any later version.
+% The latest version of this license is in
+%   http://www.latex-project.org/lppl.txt
+% and version 1.3c or later is part of all distributions of LaTeX
+% version 2008/05/04 or later.
+%
+% This work has the LPPL maintenance status `maintained'.
+%
+% The Current Maintainer of this work is Whisperity.
+%
+% This work consists of the files association-matrix.sty
+% and association-matrix.tex.
+%
+\NeedsTeXFormat{LaTeX2e}[2017/01/01]
+\ProvidesPackage{association-matrix}[2020/10/25 v1.0 Association matrix generator]
+
+\RequirePackage{etoolbox}
+\RequirePackage{forloop}
+\RequirePackage{ifthen}
+\RequirePackage{textcomp}
+\RequirePackage{xparse}
+
+\newrobustcmd{\amxDate}{2020/10/25}
+\newrobustcmd{\amxVersion}{1.0}
+
+\ExplSyntaxOn
+% (via http://tex.stackexchange.com/a/300215)
+\NewExpandableDocumentCommand{\egreg@Repeat}{O{}mm}
+ {
+  \int_compare:nT { #2 > 0 }
+   {
+    #3 \prg_replicate:nn { #2 - 1 } { #1#3 }
+   }
+ }
+\ExplSyntaxOff
+
+%%%
+%%%    FIELDS, REPRESENTATION AND DEFINITION FUNCTIONS
+%%%
+
+%% Internal cursors that are used for various iteration purposes.
+\newcounter{amx@CursorR}
+\newcounter{amx@CursorC}
+\newcounter{amx@Cursor}
+
+%% Internal data structure holding the row keys.
+\newcommand{\amx@Rows}{}
+%% The total number of theses defined.
+\newcounter{amx@RowCount}
+%%
+%% Internal data structure holding the column keys.
+\newcommand{\amx@Cols}{}
+%% The total number of columns defined.
+\newcounter{amx@ColumnCount}
+%%
+%% Internal data structure holding the row-to-column assignments.
+\newcommand{\amx@Associations}{}
+%%
+%% Returns the number of theses that are defined.
+\newrobustcmd{\amxrows}{\the\value{amx@RowCount}}
+%% Returns the number of columns that are defined.
+\newrobustcmd{\amxcols}{\the\value{amx@ColumnCount}}
+%%
+%% Retrieve the name for the <index>th row.
+\newcommand{\amx@RowKey}[1]{\csname amx@Rows@#1\endcsname}
+%% Retrieve the text for the <index>th row.
+\newcommand{\amx@RowText}[1]{\csname amx@RowTexts@#1\endcsname}
+%% Retrieve the name for the <index>th column.
+\newcommand{\amx@ColumnKey}[1]{\csname amx@Cols@#1\endcsname}
+%% Retrieve the text for the <index>th column.
+\newcommand{\amx@ColumnText}[1]{\csname amx@ColTexts@#1\endcsname}
+%%
+
+%% Registers the row with the given key, and text.
+\newrobustcmd{\amx@NewRow}[2]{%
+    \stepcounter{amx@RowCount}%
+    % 
+    \listcsgadd{amx@Rows}{#1}%
+    \expandafter\def\csname amx@Rows@\theamx@RowCount\endcsname{#1}%
+    \expandafter\def\csname amx@RowTexts@\theamx@RowCount\endcsname{#2}%
+}
+%% \amxrow{<key>}{<text>}
+%% registers the row of <key> to be <text>
+\newrobustcmd{\amxrow}[2]{%
+    \amx@NewRow{#1}{#2}%
+}
+
+%% Retrieve the text for the row defined as <key>.
+\newrobustcmd{\amxrowtext}[1]{%
+    \amx@FindRowIndex{#1}%
+    \amx@RowText{\theamx@CursorR}%
+}
+
+%% Registers the public with the given key, and body.
+\newrobustcmd{\amx@NewColumn}[2]{%
+    \stepcounter{amx@ColumnCount}%
+    % 
+    \listcsgadd{amx@Cols}{#1}%
+    \expandafter\def\csname amx@Cols@\theamx@ColumnCount\endcsname{#1}%
+    \expandafter\def\csname amx@ColTexts@\theamx@ColumnCount\endcsname{#2}%
+}
+%% \amxcol{<key>}{<text>}
+%% registers the column of <key> to be <text>
+\newrobustcmd{\amxcol}[2]{%
+    \amx@NewColumn{#1}{#2}%
+}
+
+%% Retrieve the text for the column defined as <key>.
+\newrobustcmd{\amxcoltext}[1]{%
+    \amx@FindColumnIndex{#1}%
+    \amx@ColumnText{\theamx@CursorC}%
+}
+
+%% Sets that #1 col is related to #2 row (both args are keys).
+\newrobustcmd{\amx@AssociateRowToCol}[2]{%
+    \amx@FindRowIndex{#1}     % CursorR set.
+    \amx@FindColumnIndex{#2}  % CursorC set.
+    % Format is: (row,column) pairs in the list.
+    \listcsxadd{amx@Associations}{(\amx@RowKey{\theamx@CursorR},\amx@ColumnKey{\theamx@CursorC})}%
+}
+%% \amxassociate <column-key> <row-key>
+%% assigns the given column to be relevant for the given row.
+\newrobustcmd{\amxassociate}[2]{%
+    \amx@AssociateRowToCol{#2}{#1}%
+}
+
+%%
+%%    ALGORITHMS & ITERATORS
+%%
+
+%% Internal command which sets the counter amx@CursorR to the index of the row with the given <key>.
+\newcommand\amx@FindRowIndex[1]{%
+    \renewcommand*{\do}[1]{%
+        \ifstrequal{##1}{#1}%
+            {\listbreak}%
+            {\stepcounter{amx@CursorR}}%
+    }%
+    \setcounter{amx@CursorR}{0}%
+    \dolistcsloop{amx@Rows}%
+    \stepcounter{amx@CursorR}%
+    %
+    \ifnumgreater{\value{amx@CursorR}}{\value{amx@RowCount}}{%
+        \PackageError{association-matrix}{Requested information about row '#1' but it doesn't exist}{%
+            Check that functions such as \detokenize{\amxrowtext} are not given undefined row keys!}%
+    }%
+}
+
+%% Internal command which sets the counter amx@CursorC to the index of the
+%% column with the given <key>.
+\newcommand\amx@FindColumnIndex[1]{%
+    \renewcommand*{\do}[1]{%
+        \ifstrequal{##1}{#1}%
+            {\listbreak}%
+            {\stepcounter{amx@CursorC}}%
+    }%
+    \setcounter{amx@CursorC}{0}%
+    \dolistcsloop{amx@Cols}%
+    \stepcounter{amx@CursorC}%
+    %
+    \ifnumgreater{\value{amx@CursorC}}{\value{amx@ColumnCount}}{%
+        \PackageError{association-matrix}{Requested information about column '#1' but it doesn't exist}{%
+            Check that functions such as \detokenize{\amxcoltext} are not given undefined column keys!}%
+    }%
+}
+
+%% amx@RowColAssigned {<row-key>} {<column-key>} {<if-true>} {<if-false>}
+%% If the column given is assigned by the client to the row given, executes <if-true>, otherwise, <if-false>.
+\newcommand{\amx@RowColAssigned}[4]{%
+    \xifinlistcs{(#1,#2)}{amx@Associations}{#3}{#4}%
+}
+
+%%
+%%    RENDERERS AND FORMAT CUSTOMISATION
+%%
+
+%% Renderer for the table's 1st cell.
+\newcommand{\amx@Renderer@Default@TopCorner}{Associations}
+\newcommand{\amx@Renderer@TopCorner}{} % Dummy.
+\newrobustcmd{\amxsetTopCorner}[1]{%
+    \renewcommand{\amx@Renderer@TopCorner}{#1}%
+}
+%%
+%% Renderer for the title text entries in the rows.
+\newcommand{\amx@Renderer@Default@Row}[2]{%
+    #1. #2%
+}
+\newcommand{\amx@Renderer@Default@Row@Highlighted}[2]{%
+    #1. \textbf{#2}%
+}
+\newcommand{\amx@Renderer@Row}{} % Dummy.
+\newcommand{\amx@Renderer@Row@Highlighted}{} % Dummy.
+\newrobustcmd{\amxsetRowFormat}[1]{%
+    \renewcommand{\amx@Renderer@Row}{#1}%
+}
+\newrobustcmd{\amxsetRowFormatHighlighted}[1]{%
+    \renewcommand{\amx@Renderer@Row@Highlighted}{#1}%
+}
+%%
+%% Renderer for the columns' first cells.
+\newcommand{\amx@Renderer@Default@ColumnHeading}[1]{#1}
+\newcommand{\amx@Renderer@ColumnHeading}{} % Dummy.
+\newrobustcmd{\amxsetColumnHeading}[1]{%
+    \renewcommand{\amx@Renderer@ColumnHeading}{#1}%
+}
+%%
+%% Renderer for the indicators in the rows.
+\newcommand{\amx@Renderer@Default@Indicator}{%
+    \textbullet%
+}
+\newcommand{\amx@Renderer@Default@Indicator@Highlighted@Current}{%
+    \textbullet%
+}
+\newcommand{\amx@Renderer@Default@Indicator@Highlighted@Other}{%
+    \textopenbullet%
+}
+\newcommand{\amx@Renderer@Indicator}{} % Dummy.
+\newcommand{\amx@Renderer@Indicator@Highlighted@Current}{} % Dummy.
+\newcommand{\amx@Renderer@Indicator@Highlighted@Other}{} % Dummy.
+\newrobustcmd{\amxsetIndicator}[1]{%
+    \renewcommand{\amx@Renderer@Indicator}{#1}%
+}
+\newrobustcmd{\amxsetIndicatorHighlighted}[2]{%
+    \renewcommand{\amx@Renderer@Indicator@Highlighted@Current}{#1}%
+    \renewcommand{\amx@Renderer@Indicator@Highlighted@Other}{#2}%
+}
+
+%%
+%%    RENDERING
+%%
+
+%% Internal toggle that specifies whether the current row of \RowsVSCols
+%% should be highlighted or not.
+\newtoggle{amx@AreAnyHighlightSet}
+\newtoggle{amx@IsCurrentRowHighlighted}
+%
+\newcommand{\amx@amx@RowRenderHELPER}[1]{} % Dummy.
+
+%% Renders the heading of the table.
+\newcommand{\amx@amx@RenderHeading}{%
+    \setcounter{amx@CursorC}{\value{amx@ColumnCount}}%
+    \stepcounter{amx@CursorC}%
+    %
+    \amx@Renderer@TopCorner{}%
+    \forloop{amx@Cursor}{1}{\value{amx@Cursor} < \value{amx@CursorC}}{%
+        & \amx@Renderer@ColumnHeading{\amx@ColumnText{\theamx@Cursor}}%
+    }%
+}
+
+%% amx@amx@Indicator{<row-key>}{<column-key>}
+%% Returns the visual blip part of the generated table.
+\newcommand{\amx@amx@Indicator}[2]{%
+    \amx@RowColAssigned{#1}{#2}{%
+        \iftoggle{amx@AreAnyHighlightSet}{%
+            \iftoggle{amx@IsCurrentRowHighlighted}{%
+                \amx@Renderer@Indicator@Highlighted@Current{}%
+            }{%
+                \amx@Renderer@Indicator@Highlighted@Other{}%
+            }%
+        }{%
+            \amx@Renderer@Indicator{}%
+        }%
+    }{%
+        % This field is intentionally left blank.
+    }%
+}
+
+%% amx@amx@RenderRow{<key>}
+%% Renders the row for <key>.
+\newcommand{\amx@amx@RenderRow}[1]{%
+    \amx@FindRowIndex{#1}%
+    \iftoggle{amx@AreAnyHighlightSet}{%
+        \iftoggle{amx@IsCurrentRowHighlighted}{%
+            \amx@Renderer@Row@Highlighted{\theamx@CursorR}{\amx@RowText{\theamx@CursorR}}%
+        }{%
+            \amx@Renderer@Row{\theamx@CursorR}{\amx@RowText{\theamx@CursorR}}%
+        }%
+    }{%
+        \amx@Renderer@Row{\theamx@CursorR}{\amx@RowText{\theamx@CursorR}}%
+    }%
+    %
+    \setcounter{amx@CursorC}{\value{amx@ColumnCount}}%
+    \stepcounter{amx@CursorC}%
+    \forloop{amx@Cursor}{1}{\value{amx@Cursor} < \value{amx@CursorC}}{%
+        & \amx@amx@Indicator{#1}{\amx@ColumnKey{\theamx@Cursor}}%
+    }%
+}
+
+%% Typesets the Rows vs. Cols table, highlighting the row for the given key, or highlighting no rows if #1 is 0.
+\newcommand{\amx@amx@MakeTabular}[1]{%
+    \renewcommand{\amx@amx@RowRenderHELPER}[1]{%
+        % Set the global toggle whether highlighting is enabled or not.
+        \ifthenelse{\equal{#1}{0}}{%
+            \global\togglefalse{amx@AreAnyHighlightSet}%
+        }{%
+            \global\toggletrue{amx@AreAnyHighlightSet}%
+            % 
+            % Set highlight for current row.
+            \ifthenelse{\equal{##1}{#1}}{%
+                \global\toggletrue{amx@IsCurrentRowHighlighted}%
+            }{%
+                \global\togglefalse{amx@IsCurrentRowHighlighted}%
+            }%
+        }%
+        %
+        \amx@amx@RenderRow{##1} \\
+        \hline%
+    }%
+    %
+    \begin{tabular}{|l|%
+        \egreg@Repeat[|]{\expandafter\theamx@ColumnCount}{c}%
+        |%
+    }
+        \hline
+        \amx@amx@RenderHeading \\
+        \hline
+        \forlistcsloop{\amx@amx@RowRenderHELPER}{amx@Rows}%
+    \end{tabular}%
+}
+\newrobustcmd{\amxgenerate}[1][0]{%
+    \amx@amx@MakeTabular{#1}%
+}
+
+%%
+%%    CLEARING / RESET
+%%
+
+%% Clear all the internal data structures, undefine all commands, and reset all counters.
+\newrobustcmd{\amx@Reset}{%
+    % Clear the data store macros:
+    \forloop[-1]{amx@Cursor}{\value{amx@RowCount}}{\value{amx@Cursor} > 0}{%
+        \expandafter\def\csname amx@Rows@\theamx@Cursor\endcsname{}%
+        \expandafter\def\csname amx@RowTexts@\theamx@Cursor\endcsname{}%
+    }%
+    \forloop[-1]{amx@Cursor}{\value{amx@ColumnCount}}{\value{amx@Cursor} > 0}{%
+        \expandafter\def\csname amx@Cols@\theamx@Cursor\endcsname{}%
+        \expandafter\def\csname amx@ColTexts@\theamx@Cursor\endcsname{}%
+    }%
+    % Reset the lists and counters:
+    \renewcommand{\amx@Rows}{}%
+    \setcounter{amx@RowCount}{0}%
+    \renewcommand{\amx@Cols}{}%
+    \setcounter{amx@ColumnCount}{0}%
+    \renewcommand{\amx@Associations}{}%
+    %
+    \setcounter{amx@CursorR}{0}%
+    \setcounter{amx@CursorC}{0}%
+    \setcounter{amx@Cursor}{0}%
+    % Reset customisation.
+    \amx@Renderer@Reset%
+}
+%% DANGEROUS! Clear the internal data structures!
+\newrobustcmd{\amxReset}{%
+    \amx@Reset%
+}
+%% Resets the renderers to their default versions.
+\newcommand{\amx@Renderer@Reset}{%
+    \renewcommand{\amx@Renderer@TopCorner}{\amx@Renderer@Default@TopCorner}%
+    \renewcommand{\amx@Renderer@ColumnHeading}[1]{\amx@Renderer@Default@ColumnHeading{##1}}%
+    \renewcommand{\amx@Renderer@Row}[2]{\amx@Renderer@Default@Row{##1}{##2}}%
+    \renewcommand{\amx@Renderer@Row@Highlighted}[2]{\amx@Renderer@Default@Row@Highlighted{##1}{##2}}%
+    \renewcommand{\amx@Renderer@Indicator}{\amx@Renderer@Default@Indicator}%
+    \renewcommand{\amx@Renderer@Indicator@Highlighted@Current}{\amx@Renderer@Default@Indicator@Highlighted@Current}%
+    \renewcommand{\amx@Renderer@Indicator@Highlighted@Other}{\amx@Renderer@Default@Indicator@Highlighted@Other}%
+}
+% Start the document with the renderers having the default version.
+\amx@Renderer@Reset
+
+\endinput
diff --git a/Master/tlpkg/bin/tlpkg-ctan-check b/Master/tlpkg/bin/tlpkg-ctan-check
index 05c6db11f38..1f7464eb1ae 100755
--- a/Master/tlpkg/bin/tlpkg-ctan-check
+++ b/Master/tlpkg/bin/tlpkg-ctan-check
@@ -54,7 +54,7 @@ my @TLP_working = qw(
     arydshln articleingud
     asaetr asapsym ascelike ascii-chart ascii-font asciilist ascmac
     askinclude askmaps asmeconf asmejour aspectratio
-    assignment assoccnt astro asyfig
+    assignment association-matrix assoccnt astro asyfig
     asymptote-faq-zh-cn asymptote-by-example-zh-cn asymptote-manual-zh-cn
     asypictureb atbegshi atenddvi atveryend attachfile attachfile2
     aucklandthesis augie auncial-new aurical aurl
diff --git a/Master/tlpkg/tlpsrc/association-matrix.tlpsrc b/Master/tlpkg/tlpsrc/association-matrix.tlpsrc
new file mode 100644
index 00000000000..e69de29bb2d
--- /dev/null
+++ b/Master/tlpkg/tlpsrc/association-matrix.tlpsrc
diff --git a/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc b/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc
index 7e8d07ceb17..6e9c265f986 100644
--- a/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc
+++ b/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc
@@ -53,6 +53,7 @@ depend asciilist
 depend askinclude
 depend assignment
 depend assoccnt
+depend association-matrix
 depend atenddvi
 depend attachfile
 depend aurl