colophon (16apr18)

git-svn-id: svn://tug.org/texlive/trunk@47542 c570f23f-e606-0410-a88d-b1316a301751

10 files changed, 1222 insertions, 1 deletions

diff --git a/Master/texmf-dist/doc/latex/colophon/CHANGES b/Master/texmf-dist/doc/latex/colophon/CHANGES
new file mode 100644
index 00000000000..2d1fd97935d
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/colophon/CHANGES
@@ -0,0 +1 @@
+13 Apr 1202 (15 Apr 2018):  Initial release.
diff --git a/Master/texmf-dist/doc/latex/colophon/README b/Master/texmf-dist/doc/latex/colophon/README
new file mode 100644
index 00000000000..917c1eb532d
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/colophon/README
@@ -0,0 +1,29 @@
++AMDG
+
+This document is copyright 2015 by Donald P. Goodman, and is
+released publicly under the LaTeX Project Public License.  The
+distribution and modification of this work is constrained by the
+conditions of that license.  See
+	http://www.latex-project.org/lppl.txt
+for the text of the license.  This document is released
+under version 1.3 of that license, and this work may be distributed
+or modified under the terms of that license or, at your option, any
+later version.
+
+This work has the LPPL maintenance status 'maintained'.
+
+The Current Maintainer of this work is Donald P. Goodman
+(dgoodmaniii@gmail.com).
+
+This work consists of the files colophon.ins and
+colophon.dtx, along with derived files colophon.sty and
+colophon.pdf.
+
+The colophon package provides commands for producing a
+*colophon*, or that bit at the end of many books describing
+the production process, along with the font, size, leading,
+and measure.  Every aspect of its production is easily
+configured.
+
+This package should run properly on any properly running LaTeX
+system.
diff --git a/Master/texmf-dist/doc/latex/colophon/colophon.pdf b/Master/texmf-dist/doc/latex/colophon/colophon.pdf
new file mode 100644
index 00000000000..1770f9b9569
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/colophon/colophon.pdf
diff --git a/Master/texmf-dist/doc/latex/colophon/lppl.txt b/Master/texmf-dist/doc/latex/colophon/lppl.txt
new file mode 100644
index 00000000000..22443139013
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/colophon/lppl.txt
@@ -0,0 +1,416 @@
+The LaTeX Project Public License
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+
+LPPL Version 1.3c  2008-05-04
+
+Copyright 1999 2002-2008 LaTeX3 Project
+    Everyone is allowed to distribute verbatim copies of this
+    license document, but modification of it is not allowed.
+
+
+PREAMBLE
+========
+
+The LaTeX Project Public License (LPPL) is the primary license under
+which the LaTeX kernel and the base LaTeX packages are distributed.
+
+You may use this license for any work of which you hold the copyright
+and which you wish to distribute.  This license may be particularly
+suitable if your work is TeX-related (such as a LaTeX package), but 
+it is written in such a way that you can use it even if your work is 
+unrelated to TeX.
+
+The section `WHETHER AND HOW TO DISTRIBUTE WORKS UNDER THIS LICENSE',
+below, gives instructions, examples, and recommendations for authors
+who are considering distributing their works under this license.
+
+This license gives conditions under which a work may be distributed
+and modified, as well as conditions under which modified versions of
+that work may be distributed.
+
+We, the LaTeX3 Project, believe that the conditions below give you
+the freedom to make and distribute modified versions of your work
+that conform with whatever technical specifications you wish while
+maintaining the availability, integrity, and reliability of
+that work.  If you do not see how to achieve your goal while
+meeting these conditions, then read the document `cfgguide.tex'
+and `modguide.tex' in the base LaTeX distribution for suggestions.
+
+
+DEFINITIONS
+===========
+
+In this license document the following terms are used:
+
+   `Work'
+    Any work being distributed under this License.
+    
+   `Derived Work'
+    Any work that under any applicable law is derived from the Work.
+
+   `Modification' 
+    Any procedure that produces a Derived Work under any applicable
+    law -- for example, the production of a file containing an
+    original file associated with the Work or a significant portion of
+    such a file, either verbatim or with modifications and/or
+    translated into another language.
+
+   `Modify'
+    To apply any procedure that produces a Derived Work under any
+    applicable law.
+    
+   `Distribution'
+    Making copies of the Work available from one person to another, in
+    whole or in part.  Distribution includes (but is not limited to)
+    making any electronic components of the Work accessible by
+    file transfer protocols such as FTP or HTTP or by shared file
+    systems such as Sun's Network File System (NFS).
+
+   `Compiled Work'
+    A version of the Work that has been processed into a form where it
+    is directly usable on a computer system.  This processing may
+    include using installation facilities provided by the Work,
+    transformations of the Work, copying of components of the Work, or
+    other activities.  Note that modification of any installation
+    facilities provided by the Work constitutes modification of the Work.
+
+   `Current Maintainer'
+    A person or persons nominated as such within the Work.  If there is
+    no such explicit nomination then it is the `Copyright Holder' under
+    any applicable law.
+
+   `Base Interpreter' 
+    A program or process that is normally needed for running or
+    interpreting a part or the whole of the Work.    
+
+    A Base Interpreter may depend on external components but these
+    are not considered part of the Base Interpreter provided that each
+    external component clearly identifies itself whenever it is used
+    interactively.  Unless explicitly specified when applying the
+    license to the Work, the only applicable Base Interpreter is a
+    `LaTeX-Format' or in the case of files belonging to the 
+    `LaTeX-format' a program implementing the `TeX language'.
+
+
+
+CONDITIONS ON DISTRIBUTION AND MODIFICATION
+===========================================
+
+1.  Activities other than distribution and/or modification of the Work
+are not covered by this license; they are outside its scope.  In
+particular, the act of running the Work is not restricted and no
+requirements are made concerning any offers of support for the Work.
+
+2.  You may distribute a complete, unmodified copy of the Work as you
+received it.  Distribution of only part of the Work is considered
+modification of the Work, and no right to distribute such a Derived
+Work may be assumed under the terms of this clause.
+
+3.  You may distribute a Compiled Work that has been generated from a
+complete, unmodified copy of the Work as distributed under Clause 2
+above, as long as that Compiled Work is distributed in such a way that
+the recipients may install the Compiled Work on their system exactly
+as it would have been installed if they generated a Compiled Work
+directly from the Work.
+
+4.  If you are the Current Maintainer of the Work, you may, without
+restriction, modify the Work, thus creating a Derived Work.  You may
+also distribute the Derived Work without restriction, including
+Compiled Works generated from the Derived Work.  Derived Works
+distributed in this manner by the Current Maintainer are considered to
+be updated versions of the Work.
+
+5.  If you are not the Current Maintainer of the Work, you may modify
+your copy of the Work, thus creating a Derived Work based on the Work,
+and compile this Derived Work, thus creating a Compiled Work based on
+the Derived Work.
+
+6.  If you are not the Current Maintainer of the Work, you may
+distribute a Derived Work provided the following conditions are met
+for every component of the Work unless that component clearly states
+in the copyright notice that it is exempt from that condition.  Only
+the Current Maintainer is allowed to add such statements of exemption 
+to a component of the Work. 
+
+  a. If a component of this Derived Work can be a direct replacement
+     for a component of the Work when that component is used with the
+     Base Interpreter, then, wherever this component of the Work
+     identifies itself to the user when used interactively with that
+     Base Interpreter, the replacement component of this Derived Work
+     clearly and unambiguously identifies itself as a modified version
+     of this component to the user when used interactively with that
+     Base Interpreter.
+     
+  b. Every component of the Derived Work contains prominent notices
+     detailing the nature of the changes to that component, or a
+     prominent reference to another file that is distributed as part
+     of the Derived Work and that contains a complete and accurate log
+     of the changes.
+  
+  c. No information in the Derived Work implies that any persons,
+     including (but not limited to) the authors of the original version
+     of the Work, provide any support, including (but not limited to)
+     the reporting and handling of errors, to recipients of the
+     Derived Work unless those persons have stated explicitly that
+     they do provide such support for the Derived Work.
+
+  d. You distribute at least one of the following with the Derived Work:
+
+       1. A complete, unmodified copy of the Work; 
+          if your distribution of a modified component is made by
+          offering access to copy the modified component from a
+          designated place, then offering equivalent access to copy
+          the Work from the same or some similar place meets this
+          condition, even though third parties are not compelled to
+          copy the Work along with the modified component;
+
+       2. Information that is sufficient to obtain a complete,
+          unmodified copy of the Work.
+
+7.  If you are not the Current Maintainer of the Work, you may
+distribute a Compiled Work generated from a Derived Work, as long as
+the Derived Work is distributed to all recipients of the Compiled
+Work, and as long as the conditions of Clause 6, above, are met with
+regard to the Derived Work.
+
+8.  The conditions above are not intended to prohibit, and hence do not
+apply to, the modification, by any method, of any component so that it
+becomes identical to an updated version of that component of the Work as
+it is distributed by the Current Maintainer under Clause 4, above.
+
+9.  Distribution of the Work or any Derived Work in an alternative
+format, where the Work or that Derived Work (in whole or in part) is
+then produced by applying some process to that format, does not relax or
+nullify any sections of this license as they pertain to the results of
+applying that process.
+     
+10. a. A Derived Work may be distributed under a different license
+       provided that license itself honors the conditions listed in
+       Clause 6 above, in regard to the Work, though it does not have
+       to honor the rest of the conditions in this license.
+      
+    b. If a Derived Work is distributed under a different license, that
+       Derived Work must provide sufficient documentation as part of
+       itself to allow each recipient of that Derived Work to honor the 
+       restrictions in Clause 6 above, concerning changes from the Work.
+
+11. This license places no restrictions on works that are unrelated to
+the Work, nor does this license place any restrictions on aggregating
+such works with the Work by any means.
+
+12.  Nothing in this license is intended to, or may be used to, prevent
+complete compliance by all parties with all applicable laws.
+
+
+NO WARRANTY
+===========
+
+There is no warranty for the Work.  Except when otherwise stated in
+writing, the Copyright Holder provides the Work `as is', without
+warranty of any kind, either expressed or implied, including, but not
+limited to, the implied warranties of merchantability and fitness for a
+particular purpose.  The entire risk as to the quality and performance
+of the Work is with you.  Should the Work prove defective, you assume
+the cost of all necessary servicing, repair, or correction.
+
+In no event unless required by applicable law or agreed to in writing
+will The Copyright Holder, or any author named in the components of the
+Work, or any other party who may distribute and/or modify the Work as
+permitted above, be liable to you for damages, including any general,
+special, incidental or consequential damages arising out of any use of
+the Work or out of inability to use the Work (including, but not limited
+to, loss of data, data being rendered inaccurate, or losses sustained by
+anyone as a result of any failure of the Work to operate with any other
+programs), even if the Copyright Holder or said author or said other
+party has been advised of the possibility of such damages.
+
+
+MAINTENANCE OF THE WORK
+=======================
+
+The Work has the status `author-maintained' if the Copyright Holder
+explicitly and prominently states near the primary copyright notice in
+the Work that the Work can only be maintained by the Copyright Holder
+or simply that it is `author-maintained'.
+
+The Work has the status `maintained' if there is a Current Maintainer
+who has indicated in the Work that they are willing to receive error
+reports for the Work (for example, by supplying a valid e-mail
+address). It is not required for the Current Maintainer to acknowledge
+or act upon these error reports.
+
+The Work changes from status `maintained' to `unmaintained' if there
+is no Current Maintainer, or the person stated to be Current
+Maintainer of the work cannot be reached through the indicated means
+of communication for a period of six months, and there are no other
+significant signs of active maintenance.
+
+You can become the Current Maintainer of the Work by agreement with
+any existing Current Maintainer to take over this role.
+
+If the Work is unmaintained, you can become the Current Maintainer of
+the Work through the following steps:
+
+ 1.  Make a reasonable attempt to trace the Current Maintainer (and
+     the Copyright Holder, if the two differ) through the means of
+     an Internet or similar search.
+
+ 2.  If this search is successful, then enquire whether the Work
+     is still maintained.
+
+  a. If it is being maintained, then ask the Current Maintainer
+     to update their communication data within one month.
+     
+  b. If the search is unsuccessful or no action to resume active
+     maintenance is taken by the Current Maintainer, then announce
+     within the pertinent community your intention to take over
+     maintenance.  (If the Work is a LaTeX work, this could be
+     done, for example, by posting to comp.text.tex.)
+
+ 3a. If the Current Maintainer is reachable and agrees to pass
+     maintenance of the Work to you, then this takes effect
+     immediately upon announcement.
+     
+  b. If the Current Maintainer is not reachable and the Copyright
+     Holder agrees that maintenance of the Work be passed to you,
+     then this takes effect immediately upon announcement.  
+    
+ 4.  If you make an `intention announcement' as described in 2b. above
+     and after three months your intention is challenged neither by
+     the Current Maintainer nor by the Copyright Holder nor by other
+     people, then you may arrange for the Work to be changed so as
+     to name you as the (new) Current Maintainer.
+     
+ 5.  If the previously unreachable Current Maintainer becomes
+     reachable once more within three months of a change completed
+     under the terms of 3b) or 4), then that Current Maintainer must
+     become or remain the Current Maintainer upon request provided
+     they then update their communication data within one month.
+
+A change in the Current Maintainer does not, of itself, alter the fact
+that the Work is distributed under the LPPL license.
+
+If you become the Current Maintainer of the Work, you should
+immediately provide, within the Work, a prominent and unambiguous
+statement of your status as Current Maintainer.  You should also
+announce your new status to the same pertinent community as
+in 2b) above.
+
+
+WHETHER AND HOW TO DISTRIBUTE WORKS UNDER THIS LICENSE
+======================================================
+
+This section contains important instructions, examples, and
+recommendations for authors who are considering distributing their
+works under this license.  These authors are addressed as `you' in
+this section.
+
+Choosing This License or Another License
+----------------------------------------
+
+If for any part of your work you want or need to use *distribution*
+conditions that differ significantly from those in this license, then
+do not refer to this license anywhere in your work but, instead,
+distribute your work under a different license.  You may use the text
+of this license as a model for your own license, but your license
+should not refer to the LPPL or otherwise give the impression that
+your work is distributed under the LPPL.
+
+The document `modguide.tex' in the base LaTeX distribution explains
+the motivation behind the conditions of this license.  It explains,
+for example, why distributing LaTeX under the GNU General Public
+License (GPL) was considered inappropriate.  Even if your work is
+unrelated to LaTeX, the discussion in `modguide.tex' may still be
+relevant, and authors intending to distribute their works under any
+license are encouraged to read it.
+
+A Recommendation on Modification Without Distribution
+-----------------------------------------------------
+
+It is wise never to modify a component of the Work, even for your own
+personal use, without also meeting the above conditions for
+distributing the modified component.  While you might intend that such
+modifications will never be distributed, often this will happen by
+accident -- you may forget that you have modified that component; or
+it may not occur to you when allowing others to access the modified
+version that you are thus distributing it and violating the conditions
+of this license in ways that could have legal implications and, worse,
+cause problems for the community.  It is therefore usually in your
+best interest to keep your copy of the Work identical with the public
+one.  Many works provide ways to control the behavior of that work
+without altering any of its licensed components.
+
+How to Use This License
+-----------------------
+
+To use this license, place in each of the components of your work both
+an explicit copyright notice including your name and the year the work
+was authored and/or last substantially modified.  Include also a
+statement that the distribution and/or modification of that
+component is constrained by the conditions in this license.
+
+Here is an example of such a notice and statement:
+
+  %% pig.dtx
+  %% Copyright 2005 M. Y. Name
+  %
+  % This work may be distributed and/or modified under the
+  % conditions of the LaTeX Project Public License, either version 1.3
+  % of this license or (at your option) any later version.
+  % The latest version of this license is in
+  %   http://www.latex-project.org/lppl.txt
+  % and version 1.3 or later is part of all distributions of LaTeX
+  % version 2005/12/01 or later.
+  %
+  % This work has the LPPL maintenance status `maintained'.
+  % 
+  % The Current Maintainer of this work is M. Y. Name.
+  %
+  % This work consists of the files pig.dtx and pig.ins
+  % and the derived file pig.sty.
+
+Given such a notice and statement in a file, the conditions
+given in this license document would apply, with the `Work' referring
+to the three files `pig.dtx', `pig.ins', and `pig.sty' (the last being
+generated from `pig.dtx' using `pig.ins'), the `Base Interpreter'
+referring to any `LaTeX-Format', and both `Copyright Holder' and
+`Current Maintainer' referring to the person `M. Y. Name'.
+
+If you do not want the Maintenance section of LPPL to apply to your
+Work, change `maintained' above into `author-maintained'.  
+However, we recommend that you use `maintained', as the Maintenance
+section was added in order to ensure that your Work remains useful to
+the community even when you can no longer maintain and support it
+yourself.
+
+Derived Works That Are Not Replacements
+---------------------------------------
+
+Several clauses of the LPPL specify means to provide reliability and
+stability for the user community. They therefore concern themselves
+with the case that a Derived Work is intended to be used as a
+(compatible or incompatible) replacement of the original Work. If
+this is not the case (e.g., if a few lines of code are reused for a
+completely different task), then clauses 6b and 6d shall not apply.
+
+
+Important Recommendations
+-------------------------
+
+ Defining What Constitutes the Work
+
+   The LPPL requires that distributions of the Work contain all the
+   files of the Work.  It is therefore important that you provide a
+   way for the licensee to determine which files constitute the Work.
+   This could, for example, be achieved by explicitly listing all the
+   files of the Work near the copyright notice of each file or by
+   using a line such as:
+
+    % This work consists of all files listed in manifest.txt.
+   
+   in that place.  In the absence of an unequivocal list it might be
+   impossible for the licensee to determine what is considered by you
+   to comprise the Work and, in such a case, the licensee would be
+   entitled to make reasonable conjectures as to which files comprise
+   the Work.
+
diff --git a/Master/texmf-dist/source/latex/colophon/colophon.dtx b/Master/texmf-dist/source/latex/colophon/colophon.dtx
new file mode 100644
index 00000000000..31bdb91260d
--- /dev/null
+++ b/Master/texmf-dist/source/latex/colophon/colophon.dtx
@@ -0,0 +1,552 @@
+% \iffalse
+% +AMDG  This document was begun on E October 11EE, the
+% feast of the Maternity of the Blessed Virgin Mary, and it
+% is humbly dedicated to her and to her Immaculate Heart for
+% her prayers, and to the Sacred Heart of Jesus for His
+% mercy.
+%
+% This document is copyright 2015 by Donald P. Goodman, and is
+% released publicly under the LaTeX Project Public License.  The
+% distribution and modification of this work is constrained by the
+% conditions of that license.  See
+% 	http://www.latex-project.org/lppl.txt
+% for the text of the license.  This document is released
+% under version 1.3 of that license, and this work may be distributed
+% or modified under the terms of that license or, at your option, any
+% later version.
+% 
+% This work has the LPPL maintenance status 'maintained'.
+% 
+% The Current Maintainer of this work is Donald P. Goodman
+% (dgoodmaniii@gmail.com).
+% 
+% This work consists of colophon.dtx, colophon.ins, and
+% derived files colophon.sty and colophon.pdf.
+% \fi
+
+% \iffalse
+%<package>\NeedsTeXFormat{LaTeX2e}[1999/12/01]
+%<package>\ProvidesPackage{colophon}[2018/04/01 v1.0 Support for highly configurable colophons]
+%<*driver>
+\documentclass{ltxdoc}
+
+\usepackage{doc}
+\usepackage{array}
+\usepackage{graphicx}
+\usepackage{lettrine}
+	\setcounter{DefaultLines}{3}
+	\setlength{\DefaultFindent}{2pt}
+	\renewcommand{\LettrineFontHook}{\color{red}}
+\usepackage{url}
+\usepackage{spverbatim}
+\usepackage[typeone]{dozenal}
+\usepackage{lmodern}
+\usepackage[]{colophon}
+\usepackage[colorlinks]{hyperref}
+\usepackage{makeidx}
+\EnableCrossrefs
+\PageIndex
+\CodelineNumbered
+\RecordChanges
+\makeindex
+\DoNotIndex{\?,\{,\},\|,\DeclareFontFamily,\DeclareFontShape,
+	\if,\else,\fi,\def,\divide,\clubpenalty,\widowpenalty,\ifdim,\fi,
+	\ifnum,\fi, \ifx, \fi, \Huge, \Large, \LARGE, \begin, \end,
+	\bfseries, \baselineskip, \begingroup,\endgroup,
+	\jobname, \l@poem,\leftskip, \linewidth, \index,
+	\@dottedtocline, \@firstoftwo, \@ifnextchar, \@starttoc,
+	\addcontentsline, \advance, \everypar, \expandafter,
+	\hangafter, \hangindent, \hbox, \hfil, \hsize, \hskip,
+	\multiply, \linewidth, \llap, \blap, \rlap, \tlap,
+	\makeindex, \newcommand, \newcount, \newcounter,
+	\newdimen, \newif, \newlength, \noindent, \par,
+	\parindent, \penalty, \ProvidesPackage, \relax,
+	\RequirePackage, \setcounter, \setlength, \settowidth,
+	\stepcounter, \textwidth, \the, \today, \value, \vbox,
+	\vskip, \vss, \@afterheading, \@afterindentfalse,
+	\bgroup, \egroup, \csname, \endcsname, \fontsize,
+	\ProcessOptionsX, \DeclareOptionsX, \parfillskip,
+	\rightskip, \vfil, \textheight, \thispagestyle, \scshape,
+	\selectfont,
+}
+
+\long\def\example#1#2{%
+	\bigskip%
+	\hrule%
+	\hbox to\linewidth{%
+		\hbox to0.5\linewidth{%
+			\vbox to2in{\vfil#1\vfil}%
+		}\hbox to0.5\linewidth{%
+			\vbox to2in{\vfil#2\vfil}%
+		}%
+	}%
+	\hrule%
+	\bigskip%
+}
+
+\tracingmacros=3
+\begin{document}
+\DocInput{colophon.dtx}
+\end{document}
+%</driver> \fi
+%
+% \title{The |colophon| Package, v1.0}
+% \author{Donald P.\ Goodman III}
+% \date{\today}
+%
+% \maketitle
+%
+% \begin{abstract}
+% \noindent
+% The \emph{colophon} is fascinating to anyone even slightly
+% interested in typography and document design; and yet
+% incredibly, the best document design system ever produced
+% \emph{has no facilities for producing colophons}.  Hence,
+% the |colophon| package.  
+% \end{abstract}
+%
+% \tableofcontents
+%
+% \section{Introduction}
+%
+% Colophons date back to ancient times, where scribes would
+% simply write in where they'd gotten the text that they'd
+% copied, and what they'd changed in it.  One might see a
+% colophon that read, \textit{A M.\ Tullio Cicerone, e texto
+% G.\ Juliani C\ae{}saris, cum tribus libris novis} (``By
+% Marcus Tullius Cicero, from a text of Gaius Julius
+% Caesar, with three new books.''  Though why Cicero is
+% adding to a book of Julius Caesar, and using a ``j'' long
+% before it became a letter, is a mystery.)
+%
+% When printing was invented, publishers would add a
+% colophon, often at the end (rather than at the beginning,
+% where it typically sits now), noting their identities and
+% addresses.  Over time, particularly with small publishers,
+% colophons got bigger, and contained information about
+% design, font types, and the like.  Too often they're
+% completely omitted now, but I think it's still worth
+% putting them in.  I know that I \emph{love} to see them in
+% the books I read, at least.
+%
+% \section{Default Behavior}
+%
+% By default, |colophon| uses a very simple two-command
+% structure that produces what I, personally, believe to be
+% a well-formatted and attractive colophon.  We begin with
+% the \DescribeEnv{colophon}|colophon| environment, which
+% can be realized by the usual |\begin{colophon}| and
+% |\end{colophon}| pairs.  The contents of the colophon
+% itself will be put in between these two, and the spacing,
+% page style, paragraph styling, and the like will all be
+% taken care of in the way that I, personally, think looks
+% best.
+%
+% If you don't like using environments, feel free to use
+% \DescribeMacro{\colophon}|\colophon| to begin the colophon
+% and \DescribeMacro{\endcolophon}|\endcolophon| to end it.
+% That's how they were defined, and that's what the \LaTeX\
+% environment creation macros produce anyway, so do as you
+% will.  Using one or the other system produces no
+% difference in functionality.
+%
+% By default, this produces a full-page colophon, printed
+% after a |\cleardoublepage| has been executed (in other
+% words, on the next available recto (odd-numbered) page.
+% It does this with a centered heading, which will be the
+% word ``Colophon''.  If you want it to have some other
+% heading, tell the package so with
+% \DescribeMacro{\colophontitle}|\colophontitle|.  E.g., if
+% you want the title to be ``Stuff About the Book,'' run:
+%
+% \begin{quote}
+% |\colophontitle{Stuff About the Book}|
+% \end{quote}
+%
+% Alternatively, you can set the title with the |title|
+% package option:
+%
+% \begin{quote}
+% |\usepackage[title={Stuff About the Book}]{colophon}|
+% \end{quote}
+%
+% The title will also be printed in |\scshape|,
+% once again because I like it that way.  You can change
+% that, too, with either the
+% \DescribeMacro{\colophontitlestyle}|\colophontitlestyle|
+% macro, or with the |titlestyle| package option.  Remember
+% that you should \emph{not} use the backslash with your
+% style command in the package option.  The following two
+% lines are equivalent:
+%
+% \begin{quote}
+% |\colophontitlestyle{\itshape}|\\
+% |\usepackage[titlestyle=itshape]{colophon}|
+% \end{quote}
+%
+% Give titlestyle no option if you just want normal roman
+% type.
+%
+% There are similar options governing the size of the title,
+% \DescribeMacro{\colophontitlesize}|\colophontitlesize| and
+% the |titlesize| package option.  It takes a point size as
+% an argument and sets both font size \emph{and} leading to
+% that amount.  Since it seems unlikely the title will have
+% more than one line, that seemed fine to me; if this breaks
+% your use case, let me know, and I'll fix it.  The
+% following two lines are equivalent:
+%
+% \begin{quote}
+% |\colophontitlesize{60pt}|\\
+% |\usepackage[titlesize=60pt]{colophon}|
+% \end{quote}
+%
+% The default size is |48pt|.
+%
+% There will also be some space between the title and the
+% colophon text.  This can be controlled with either the
+% \DescribeMacro{\colophonmidspace}|\colophonmidspace|
+% command, or the |aftertitle| package option.  The
+% following two are equivalent:
+%
+% \begin{quote}
+% |\colophonmidspace{3em}|\\
+% |\usepackage[aftertitle=3em]{colophon}|
+% \end{quote}
+%
+% By default, the colophon page will have pagestyle |empty|.
+% To change this, use
+% \DescribeMacro{\colophonpagestyle}|\colophonpagestyle| or
+% the package option |pagestyle|.  The following two lines
+% are equivalent:
+%
+% \begin{quote}
+% |\colophonpagestyle{plain}|\\
+% |\usepackage[pagestyle=plain]{colophon}|
+% \end{quote}
+%
+% You can align the title centered, on the left, or on the
+% right, by using
+% \DescribeMacro{\colophontitlealign}|\colophontitlealign|,
+% or the |titlealign| package option.  The options are |c|
+% for centered (the default), |l| for left-aligned, and |r|
+% for right-aligned.  The following two are
+% equivalent:
+%
+% \begin{quote}
+% |\colophontitlealign{c}|\\
+% |\usepackage[titlealign=c]{colophon}|
+% \end{quote}
+%
+% Finally, there are hooks before and after the title which
+% should allow you to run whatever arbitrary code you'd like
+% there.  By default, these are empty; but you can fill them
+% with, for example, font-changing commands.  This spares
+% the package the overhead of having to determine what font
+% system you're using, and what engine, and lets you worry
+% about all that.  The hooks are
+% \DescribeMacro{\colophonpretitlehook}|\colophonpretitlehook|
+% and
+% \DescribeMacro{\colophonposttitlehook}|\colophonposttitlehook|.
+% By default, both are empty; redefine them to whatever you
+% need them to be.
+%
+% The actual texts of the colophon are governed by much the
+% same parameters.  The macros simply have |par| rather than
+% |title| in their names.  There are two additional ones,
+% however, worth noting.  You can set:
+%
+% \begin{itemize}
+%	\item \DescribeMacro{\colophonparstyle}|\colophonparstyle|,
+%	which will govern the style of the text.  By default,
+%	this is empty, yielding whatever your normal font style
+%	is.  Its package option is |parstyle|; remember not to
+%	use the backslash when setting it in the package options,
+%	as with |titlestyle|.
+%	\item \DescribeMacro{\colophonparsize}|\colophonparsize|,
+%	which is the point size of the colophon text.  Its
+%	package option is |parsize|.  By default, |15pt|.
+%	\item \DescribeMacro{\colophonparlead}|\colophonparlead|,
+%	which is the size of the leading of the colophon text
+%	(that is, the distance from one baseline to the next
+%	baseline down.  By default, |18pt|.  Its package option
+%	is |parlead|.
+%  \item \DescribeMacro{\colophonnofirstindent}|\colophonnofirstindent|,
+%	turns off |colophon|'s default behavior of suppressing
+%	the first indent after the title line.  Default is to
+%	suppress the indent.  The package option is
+%	|nofirstindent|.
+%	\item \DescribeMacro{\colophonpreparhook}|\colophonpreparhook|
+%	and its brother, 
+%	\DescribeMacro{\colophonpostparhook}|\colophonpostparhook|,
+%	allows arbitrary commands to be run before and after the
+%	colophon text.  They do not have package option
+%	equivalents.
+%  \item Last but not least,
+%  \DescribeMacro{\colophonparalign}|\colophonparalign|.
+%  This takes more or less arbitrary commands, but it's
+%  designed to permit what I think is a great stylistic
+%  touch with colophons:  a fully justified paragraph, with
+%  the final line containing equal space on either side.  By
+%  default, it achieves this, and is set as follows:
+%  \begin{quote}
+%	|\leftskip=0pt plus.5fil%|\\
+%	|\rightskip=0pt plus-.5fil%|\\
+%	|\parfillskip=0pt plus1fil%|
+%  \end{quote}
+%	This does the trick.  If you don't like this, or want to
+%	do something else with it, change it as you will.  This
+%	also has no package option equivalent.
+% \end{itemize}
+%
+% That gives the default settings.  If for some reason you
+% do not want a full-page colophon (maybe you like it tucked
+% into the bottom of the last page, for example, as was
+% common long ago), use the
+% \DescribeMacro{\colophonnofullpage}|\colophonnofullpage|
+% macro, or the |nofullpage| package option.  Note, however,
+% that this merely means the colophon won't take up a full
+% page; it will still create a new page before it prints.
+% To prevent it from clearing pages, use
+% \DescribeMacro{\colophonnoclrdblpg}|\colophonnoclrdblpg|,
+% or the package option |noclrdblpg|.  Both options together
+% will allow you to tuck your colophon on the bottom of your
+% last page.
+%
+% If you want the colophon to clear one page, but not a double
+% page, use \DescribeMacro{\colophonclrpg}|\colophonclrpg|,
+% or the package option |clrpg|.
+%
+% Note that, if the colophon is not clearing any pages, it
+% will \emph{not} set the colophon page style, so
+% |\colophonpagestyle| and the |pagestyle| package option
+% will do nothing.
+%
+% Note also that, when you're not using a full page, if
+% doesn't mean you can't have the colophon alone on the
+% page; it just means that the colophon won't be vertically
+% centered on the that page.  You can print your colophon,
+% issue a |\newpage|, and have it on the page by itself but
+% not vertically centered.  So to set the spaces above and
+% below the colophon, use
+% \DescribeMacro{\colophontopspace}|\colophontopspace| and
+% its obviously-named brother,
+% \DescribeMacro{\colophonbotspace}|\colophonbotspace|.
+% Their package option equivalents are |topspace| and
+% |botspace|, respectively.  These will insert the requested
+% amount of space before and after the colophon, allowing
+% you to format it however you like.
+%
+% \section{Examples}
+%
+% We've set up two examples, one of a full page and one of a
+% partial page colophon, which will give a good idea of what
+% the capabilities of the |colophon| package are.
+%
+% \begin{tabular}{>{\raggedright}m{0.5\textwidth}m{0.5\textwidth}}
+% |\usepackage[%|
+% |title={Design Information},|
+% |titlestyle=scshape,|
+% |titlesize=30pt,|
+% |titlealign=c,|
+% |parstyle=itshape,|
+% |parsize=12pt,|
+% |parlead=15pt|
+% |]{colophon}| &
+% \fbox{\includegraphics[scale=0.15]{fullpage_ex.pdf}} \\
+% \end{tabular}
+%
+% Here, we've changed a lot of details, and unnecessarily
+% specified |scshape| as our title style (that is the
+% default, after all), but came up with the page shown
+% above.
+%
+% \begin{tabular}{>{\raggedright}m{0.5\textwidth}m{0.5\textwidth}}
+% |\usepackage[%|
+% |title={Design Stuff},|
+% |titlestyle=itshape,|
+% |titlesize=24pt,|
+% |titlealign=r,|
+% |parstyle=upshape,|
+% |parsize=10pt,|
+% |parlead=11pt,|
+% |noclrdblpg,|
+% |nofullpage,|
+% |topspace=2in|
+% |]{colophon}| &
+% \fbox{\includegraphics[scale=0.15]{partpage_ex.pdf}} \\
+% \end{tabular}
+%
+% Here we've turned off the full page and clearing of a
+% double page in order to tuck our colophon into the last
+% part of the page.  The folio is still there, therefore
+% (|colophon| doesn't change page styles unless it has its
+% own page), in accordance with the rest of the document.
+% We've also right-aligned our title, and adjusted our top
+% space to stick it closer to the bottom of the page.
+%
+% Happy \TeX{}ing!
+%
+% \section{Implementation}
+%
+% The first thing we do is load |xkeyval|, so we can
+% implement all those great package-loading options.
+%    \begin{macrocode}
+\RequirePackage{xkeyval}
+%    \end{macrocode}
+% We'll declare the options and process them later, after
+% we've declared a bunch of |\if|s and other defaults.
+% Which we get to next:  declaring all the new conditionals
+% that we'll need, along with the functions that will enable
+% us to alter them without mucking around with the
+% |@|-containing internal commands.
+%    \begin{macrocode}
+\newif\ifclpn@clrpg\clpn@clrpgfalse%
+	\def\colophonclrpg{\clpn@clrpgtrue}%
+\newif\ifclpn@clrdblpg\clpn@clrdblpgtrue%
+	\def\colophonnoclrblpg{\clpn@clrdblpgfalse}%
+\newif\ifclpn@fullpage\clpn@fullpagetrue%
+	\def\colophonnofullpage{\clpn@fullpagefalse}%
+\newif\ifclpn@centertitle\clpn@centertitletrue%
+\newif\ifclpn@lefttitle\clpn@lefttitlefalse%
+\newif\ifclpn@righttitle\clpn@righttitlefalse%
+%    \end{macrocode}
+% The code for |\colophontitlealign| is necessarily more
+% complex than the others, since it has to adjust the
+% settings for multiple conditions.
+%    \begin{macrocode}
+\def\colophontitlealign#1{%
+	\ifx#1c%
+		\clpn@centertitletrue%
+		\clpn@lefttitlefalse%
+		\clpn@righttitlefalse%
+	\fi
+	\ifx#1l%
+		\clpn@centertitlefalse%
+		\clpn@lefttitletrue%
+		\clpn@righttitlefalse%
+	\fi
+	\ifx#1r%
+		\clpn@centertitlefalse%
+		\clpn@lefttitlefalse%
+		\clpn@righttitletrue%
+	\fi
+}%
+\newif\ifclpn@nofirstindent\clpn@nofirstindenttrue%
+	\def\colophonnofirstindent{\clpn@nofirstindentfalse}%
+\def\clpn@overspace{0pt}%
+	\def\colophontopspace#1{\def\clpn@overspace{#1}}%
+\def\clpn@underspace{0pt}%
+	\def\colophonbotspace#1{\def\clpn@underspace{#1}}%
+\def\clpn@undertitle{2em}%
+	\def\colophonmidspace#1{\def\clpn@undertitle{#1}}%
+\def\clpn@pagestyle{empty}%
+	\def\colophonpagestyle#1{\def\clpn@pagestyle{#1}}%
+\def\clpn@titleword{Colophon}%
+	\def\colophontitle#1{\def\clpn@titleword{#1}}%
+\def\clpn@titlesty{\scshape}%
+	\def\colophontitlestyle#1{\def\clpn@titlesty{#1}}%
+\def\clpn@titlesize{48pt}%
+	\def\colophontitlesize#1{\def\clpn@titlesize{#1}}%
+\def\clpn@pretitle{}%
+	\def\colophonpretitlehook#1{\def\clpn@pretitle{#1}}%
+\def\clpn@posttitle{}
+	\def\colophonposttitlehook#1{\def\clpn@posttitle{#1}}%
+\def\clpn@parsty{}%
+	\def\colophonparstyle#1{\def\clpn@parsty{#1}}%
+\def\clpn@parsize{15pt}%
+	\def\colophonparsize#1{\def\clpn@parsize{#1}}%
+\def\clpn@parlead{18pt}%
+	\def\colophonparlead#1{\def\clpn@parlead{#1}}%
+\def\clpn@paralign{%
+	\leftskip=0pt plus.5fil%
+	\rightskip=0pt plus-.5fil%
+	\parfillskip=0pt plus1fil%
+}%
+	\def\colophonparalign#1{\def\clpn@paralign{#1}}%
+\def\clpn@prepar{}%
+	\def\colophonpreparhook#1{\def\clpn@prepar{#1}}%
+\def\clpn@postpar{}
+	\def\colophonpostparhook#1{\def\clpn@postpar{#1}}%
+%    \end{macrocode}
+% As promised, we're now at the option-declaring stage.  We
+% declare options for a everything that we can declare above
+% (at least, reasonably), and finish by parsing them.  We
+% have to do some shenanigans to get the style options to
+% work, in order to insert backslashes, but this is
+% relatively minor.
+%    \begin{macrocode}
+\DeclareOptionX{title}{\def\clpn@titleword{#1}}
+\DeclareOptionX{titlestyle}{%
+	\def\clpn@titlesty{\csname#1\endcsname}%
+}%
+\DeclareOptionX{titlesize}{\def\clpn@titlesize{#1}}
+\DeclareOptionX{aftertitle}{\def\clpn@undertitle{#1}}
+\DeclareOptionX{titlealign}{\colophontitlealign{#1}}
+\DeclareOptionX{parstyle}{%
+	\def\clpn@parsty{\csname#1\endcsname}%
+}%
+\DeclareOptionX{parsize}{\def\clpn@parsize{#1}}
+\DeclareOptionX{parlead}{\def\clpn@parlead{#1}}
+\DeclareOptionX{nofullpage}{\clpn@fullpagefalse}
+\DeclareOptionX{noclrdblpg}{\clpn@clrdblpgfalse}
+\DeclareOptionX{clrpg}{\clpn@clrpgtrue}
+\DeclareOptionX{topspace}{\def\clpn@overspace{#1}}
+\DeclareOptionX{botspace}{\def\clpn@underspace{#1}}
+\DeclareOptionX{nofirstindent}{\clpn@nofirstindentfalse}
+\ProcessOptionsX
+%    \end{macrocode}
+% And now we define the colophon itself, putting all the
+% options above to good use.
+%    \begin{macrocode}
+\def\colophon{%
+	\ifclpn@clrdblpg%
+		\cleardoublepage%
+		\thispagestyle{\clpn@pagestyle}%
+	\fi%
+	\ifclpn@clrpg%
+		\clearpage%
+		\thispagestyle{\clpn@pagestyle}%
+	\fi%
+	\ifclpn@fullpage%
+		\vbox to\textheight\bgroup%
+			\vfil%
+	\fi%
+	\vskip\clpn@overspace%
+	\hbox to\linewidth{%
+		\ifclpn@centertitle\hfil\fi%
+		\ifclpn@righttitle\hfil\fi%
+		\fontsize{\clpn@titlesize}{\clpn@titlesize}\selectfont%
+		\clpn@titlesty%
+		\clpn@pretitle%
+		\clpn@titleword%
+		\clpn@posttitle%
+		\ifclpn@lefttitle\hfil\fi%
+		\ifclpn@centertitle\hfil\fi%
+	}%
+	\vskip\clpn@undertitle%
+	\bgroup%
+	\clpn@parsty%
+	\fontsize{\clpn@parsize}{\clpn@parlead}\selectfont%
+	\clpn@prepar\clpn@paralign%
+	\ifclpn@nofirstindent%
+		\@afterindentfalse\@afterheading%
+	\fi%
+}%
+%    \end{macrocode}
+% Then, finally, we end the colophon.
+%    \begin{macrocode}
+\def\endcolophon{%
+	\clpn@postpar%
+	\egroup%
+	\vskip\clpn@underspace
+	\ifclpn@fullpage%
+		\vfil%
+		\egroup%
+	\fi
+}%
+%    \end{macrocode}
+% And there's the |colophon| package.  I hope it proves
+% useful to someone besides myself.  Happy \TeX{}ing!
+%
+% \PrintIndex
diff --git a/Master/texmf-dist/source/latex/colophon/colophon.ins b/Master/texmf-dist/source/latex/colophon/colophon.ins
new file mode 100644
index 00000000000..d5f573dad57
--- /dev/null
+++ b/Master/texmf-dist/source/latex/colophon/colophon.ins
@@ -0,0 +1,65 @@
+% +AMDG
+% This document was begun on 12 Apr 1202, the feast of St.
+% Justin Martyr, and it is humbly dedicated to him and to
+% the Immaculate Heart of Mary, for their prayers, and to
+% the Sacred Heart of Jesus, for His mercy.
+%
+% This document is copyright 2018 by Donald P. Goodman, and is
+% released publicly under the LaTeX Project Public License.  The
+% distribution and modification of this work is constrained by the
+% conditions of that license.  See
+% 	http://www.latex-project.org/lppl.txt
+% for the text of the license.  This document is released
+% under version 1.3 of that license, and this work may be distributed
+% or modified under the terms of that license or, at your option, any
+% later version.
+% 
+% This work has the LPPL maintenance status 'maintained'.
+% 
+% The Current Maintainer of this work is Donald P. Goodman
+% (dgoodmaniii@gmail.com).
+% 
+% This work consists of colophon.dtx, colophon.ins, and
+% derived files colophon.sty and colophon.pdf.
+
+\input docstrip.tex
+
+\preamble
+This is a generated file.
+
+This document is copyright 2018 by Donald P. Goodman, and is
+released publicly under the LaTeX Project Public License.  The
+distribution and modification of this work is constrained by the
+conditions of that license.  See
+	http://www.latex-project.org/lppl.txt
+for the text of the license.  This document is released
+under version 1.3 of that license, and this work may be distributed
+or modified under the terms of that license or, at your option, any
+later version.
+
+This work has the LPPL maintenance status 'maintained'.
+
+The Current Maintainer of this work is Donald P. Goodman
+(dgoodmaniii@gmail.com).
+
+This work consists of colophon.dtx, colophon.ins, and
+derived files colophon.sty and colophon.pdf.
+\endpreamble
+
+\keepsilent
+\generate{\file{colophon.sty}{\from{colophon.dtx}{package}}}
+
+\Msg{******************************************************}
+\Msg{*}
+\Msg{* To finish the installation you have to move the}
+\Msg{* following file into a directory searched by TeX:}
+\Msg{*}
+\Msg{* \space\space colophon.sty}
+\Msg{*}
+\Msg{* To produce the documentation run the file colophon.dtx}
+\Msg{* through LaTeX.}
+\Msg{*}
+\Msg{* Happy TeXing!}
+\Msg{******************************************************}
+
+\endbatchfile
diff --git a/Master/texmf-dist/tex/latex/colophon/colophon.sty b/Master/texmf-dist/tex/latex/colophon/colophon.sty
new file mode 100644
index 00000000000..454dd39f8dc
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/colophon/colophon.sty
@@ -0,0 +1,157 @@
+%%
+%% This is file `colophon.sty',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% colophon.dtx  (with options: `package')
+%% This is a generated file.
+%% 
+%% This document is copyright 2018 by Donald P. Goodman, and is
+%% released publicly under the LaTeX Project Public License.  The
+%% distribution and modification of this work is constrained by the
+%% conditions of that license.  See
+%% http://www.latex-project.org/lppl.txt
+%% for the text of the license.  This document is released
+%% under version 1.3 of that license, and this work may be distributed
+%% or modified under the terms of that license or, at your option, any
+%% later version.
+%% 
+%% This work has the LPPL maintenance status 'maintained'.
+%% 
+%% The Current Maintainer of this work is Donald P. Goodman
+%% (dgoodmaniii@gmail.com).
+%% 
+%% This work consists of colophon.dtx, colophon.ins, and
+%% derived files colophon.sty and colophon.pdf.
+
+\NeedsTeXFormat{LaTeX2e}[1999/12/01]
+\ProvidesPackage{colophon}[2018/04/01 v1.0 Support for highly configurable colophons]
+\RequirePackage{xkeyval}
+\newif\ifclpn@clrpg\clpn@clrpgfalse%
+\def\colophonclrpg{\clpn@clrpgtrue}%
+\newif\ifclpn@clrdblpg\clpn@clrdblpgtrue%
+\def\colophonnoclrblpg{\clpn@clrdblpgfalse}%
+\newif\ifclpn@fullpage\clpn@fullpagetrue%
+\def\colophonnofullpage{\clpn@fullpagefalse}%
+\newif\ifclpn@centertitle\clpn@centertitletrue%
+\newif\ifclpn@lefttitle\clpn@lefttitlefalse%
+\newif\ifclpn@righttitle\clpn@righttitlefalse%
+\def\colophontitlealign#1{%
+\ifx#1c%
+\clpn@centertitletrue%
+\clpn@lefttitlefalse%
+\clpn@righttitlefalse%
+\fi
+\ifx#1l%
+\clpn@centertitlefalse%
+\clpn@lefttitletrue%
+\clpn@righttitlefalse%
+\fi
+\ifx#1r%
+\clpn@centertitlefalse%
+\clpn@lefttitlefalse%
+\clpn@righttitletrue%
+\fi
+}%
+\newif\ifclpn@nofirstindent\clpn@nofirstindenttrue%
+\def\colophonnofirstindent{\clpn@nofirstindentfalse}%
+\def\clpn@overspace{0pt}%
+\def\colophontopspace#1{\def\clpn@overspace{#1}}%
+\def\clpn@underspace{0pt}%
+\def\colophonbotspace#1{\def\clpn@underspace{#1}}%
+\def\clpn@undertitle{2em}%
+\def\colophonmidspace#1{\def\clpn@undertitle{#1}}%
+\def\clpn@pagestyle{empty}%
+\def\colophonpagestyle#1{\def\clpn@pagestyle{#1}}%
+\def\clpn@titleword{Colophon}%
+\def\colophontitle#1{\def\clpn@titleword{#1}}%
+\def\clpn@titlesty{\scshape}%
+\def\colophontitlestyle#1{\def\clpn@titlesty{#1}}%
+\def\clpn@titlesize{48pt}%
+\def\colophontitlesize#1{\def\clpn@titlesize{#1}}%
+\def\clpn@pretitle{}%
+\def\colophonpretitlehook#1{\def\clpn@pretitle{#1}}%
+\def\clpn@posttitle{}
+\def\colophonposttitlehook#1{\def\clpn@posttitle{#1}}%
+\def\clpn@parsty{}%
+\def\colophonparstyle#1{\def\clpn@parsty{#1}}%
+\def\clpn@parsize{15pt}%
+\def\colophonparsize#1{\def\clpn@parsize{#1}}%
+\def\clpn@parlead{18pt}%
+\def\colophonparlead#1{\def\clpn@parlead{#1}}%
+\def\clpn@paralign{%
+\leftskip=0pt plus.5fil%
+\rightskip=0pt plus-.5fil%
+\parfillskip=0pt plus1fil%
+}%
+\def\colophonparalign#1{\def\clpn@paralign{#1}}%
+\def\clpn@prepar{}%
+\def\colophonpreparhook#1{\def\clpn@prepar{#1}}%
+\def\clpn@postpar{}
+\def\colophonpostparhook#1{\def\clpn@postpar{#1}}%
+\DeclareOptionX{title}{\def\clpn@titleword{#1}}
+\DeclareOptionX{titlestyle}{%
+\def\clpn@titlesty{\csname#1\endcsname}%
+}%
+\DeclareOptionX{titlesize}{\def\clpn@titlesize{#1}}
+\DeclareOptionX{aftertitle}{\def\clpn@undertitle{#1}}
+\DeclareOptionX{titlealign}{\colophontitlealign{#1}}
+\DeclareOptionX{parstyle}{%
+\def\clpn@parsty{\csname#1\endcsname}%
+}%
+\DeclareOptionX{parsize}{\def\clpn@parsize{#1}}
+\DeclareOptionX{parlead}{\def\clpn@parlead{#1}}
+\DeclareOptionX{nofullpage}{\clpn@fullpagefalse}
+\DeclareOptionX{noclrdblpg}{\clpn@clrdblpgfalse}
+\DeclareOptionX{clrpg}{\clpn@clrpgtrue}
+\DeclareOptionX{topspace}{\def\clpn@overspace{#1}}
+\DeclareOptionX{botspace}{\def\clpn@underspace{#1}}
+\DeclareOptionX{nofirstindent}{\clpn@nofirstindentfalse}
+\ProcessOptionsX
+\def\colophon{%
+\ifclpn@clrdblpg%
+\cleardoublepage%
+\thispagestyle{\clpn@pagestyle}%
+\fi%
+\ifclpn@clrpg%
+\clearpage%
+\thispagestyle{\clpn@pagestyle}%
+\fi%
+\ifclpn@fullpage%
+\vbox to\textheight\bgroup%
+\vfil%
+\fi%
+\vskip\clpn@overspace%
+\hbox to\linewidth{%
+\ifclpn@centertitle\hfil\fi%
+\ifclpn@righttitle\hfil\fi%
+\fontsize{\clpn@titlesize}{\clpn@titlesize}\selectfont%
+\clpn@titlesty%
+\clpn@pretitle%
+\clpn@titleword%
+\clpn@posttitle%
+\ifclpn@lefttitle\hfil\fi%
+\ifclpn@centertitle\hfil\fi%
+}%
+\vskip\clpn@undertitle%
+\bgroup%
+\clpn@parsty%
+\fontsize{\clpn@parsize}{\clpn@parlead}\selectfont%
+\clpn@prepar\clpn@paralign%
+\ifclpn@nofirstindent%
+\@afterindentfalse\@afterheading%
+\fi%
+}%
+\def\endcolophon{%
+\clpn@postpar%
+\egroup%
+\vskip\clpn@underspace
+\ifclpn@fullpage%
+\vfil%
+\egroup%
+\fi
+}%
+\endinput
+%%
+%% End of file `colophon.sty'.
diff --git a/Master/tlpkg/bin/tlpkg-ctan-check b/Master/tlpkg/bin/tlpkg-ctan-check
index e28bbba1736..d688367d994 100755
--- a/Master/tlpkg/bin/tlpkg-ctan-check
+++ b/Master/tlpkg/bin/tlpkg-ctan-check
@@ -159,7 +159,7 @@ my @TLP_working = qw(
     cnbwp cnltx cntformats cntperchap
     cochineal codedoc codepage codesection codicefiscaleitaliano
     coelacanth collcell collectbox collref
-    colordoc colorinfo coloring colorsep colorspace colortab
+    colophon colordoc colorinfo coloring colorsep colorspace colortab
     colortbl colorwav colorweb colourchange
     combelow combine combinedgraphics combofont comfortaa comicneue
     comma commado commath comment
diff --git a/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc b/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc
index dbd5541f7c1..fe1f996fc6c 100644
--- a/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc
+++ b/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc
@@ -173,6 +173,7 @@ depend codepage
 depend codesection
 depend collcell
 depend collectbox
+depend colophon
 depend colordoc
 depend colorinfo
 depend coloring
diff --git a/Master/tlpkg/tlpsrc/colophon.tlpsrc b/Master/tlpkg/tlpsrc/colophon.tlpsrc
new file mode 100644
index 00000000000..e69de29bb2d
--- /dev/null
+++ b/Master/tlpkg/tlpsrc/colophon.tlpsrc