circuitikz (23mar20)

git-svn-id: svn://tug.org/texlive/trunk@54506 c570f23f-e606-0410-a88d-b1316a301751

9 files changed, 188 insertions, 73 deletions

diff --git a/Master/texmf-dist/doc/context/third/circuitikz/circuitikz-context.pdf b/Master/texmf-dist/doc/context/third/circuitikz/circuitikz-context.pdf
index de9bb9e6b1b..683b25c31de 100644
--- a/Master/texmf-dist/doc/context/third/circuitikz/circuitikz-context.pdf
+++ b/Master/texmf-dist/doc/context/third/circuitikz/circuitikz-context.pdf
diff --git a/Master/texmf-dist/doc/generic/circuitikz/CHANGELOG.md b/Master/texmf-dist/doc/generic/circuitikz/CHANGELOG.md
index 811518954f4..9963e432d00 100644
--- a/Master/texmf-dist/doc/generic/circuitikz/CHANGELOG.md
+++ b/Master/texmf-dist/doc/generic/circuitikz/CHANGELOG.md
@@ -1,36 +1,36 @@
 <!--- CircuiTikz - Changelog --->
 The major changes among the different circuitikz versions are listed here. See <https://github.com/circuitikz/circuitikz/commits> for a full list of changes.
 
-* Version 1.0.1 (2020-02-22)
-
-Minor fixes and addition to 1.0, in time to catch the freeze for TL2020.
+* Version 1.0.2 (2020-03-22)
 
-- add v1.0 version snapshots
-- added crossed generic impedance (suggested by Radványi Patrik Tamás)
-- added open barrier bipole (suggested by Radványi Patrik Tamás)
-- added two flags to flip the direction of light's arrows on LED and photodiode (suggested by karlkappe on GitHub)
-- added a special key to help with precision loss in case of fractional scaling (thanks to AndreaDiPietro92 on GitHub for noticing and reporting, and to Schrödinger's cat for finding a fix)
-- fixed a nasty bug for the flat file generation for ConTeXt
-
-* Version 1.0 (2020-02-04)
+    - added Schottky transistors (thanks to a suggestion by Jérôme Monclard on GitHub)
+    - fixed formatting of `CHANGELOG.md`
 
-And finally... version 1.0 (2020-02-04) of `circuitikz` is released.
+* Version 1.0.1 (2020-02-22)
 
-The main updates since version 0.8.3, which was the last release before Romano started co-maintaining the project, are the following --- part coded by Romano, part by several collaborators around the internet:
+    Minor fixes and addition to 1.0, in time to catch the freeze for TL2020.
 
-- The manual has been reorganized and extended, with the addition of a tutorial part; tens of examples have been added all over the map.
+    - add v1.0 version snapshots
+    - added crossed generic impedance (suggested by Radványi Patrik Tamás)
+    - added open barrier bipole (suggested by Radványi Patrik Tamás)
+    - added two flags to flip the direction of light's arrows on LED and photodiode (suggested by karlkappe on GitHub)
+    - added a special key to help with precision loss in case of fractional scaling (thanks to AndreaDiPietro92 on GitHub for noticing and reporting, and to Schrödinger's cat for finding a fix)
+    - fixed a nasty bug for the flat file generation for ConTeXt
 
-- Around 74 new shapes where added. Notably, now there are chips, mux-demuxes, multi-terminal transistors, several types of switches, flip-flops, vacuum tubes, 7-segment displays, more amplifiers, and so on.
+* Version 1.0 (2020-02-04)
 
-- Several existing shapes have been enhanced; for example, logic gates have a variable number of inputs, transistors are more configurable, resistors can be shaped more, and more.
+    And finally... version 1.0 (2020-02-04) of `circuitikz` is released.
 
-- You can style your circuit, changing relative sizes, default thickness and fill color, and more details of how you like your circuit to look; the same you can do with labels (voltages, currents, names of components and so on).
+    The main updates since version 0.8.3, which was the last release before Romano started co-maintaining the project, are the following --- part coded by Romano, part by several collaborators around the internet:
 
-- A lot of bugs have been squashed; especially the (very complex) voltage direction conundrum has been clarified and you can choose your preferred style here too.
+    - The manual has been reorganized and extended, with the addition of a tutorial part; tens of examples have been added all over the map.
+    - Around 74 new shapes where added. Notably, now there are chips, mux-demuxes, multi-terminal transistors, several types of switches, flip-flops, vacuum tubes, 7-segment displays, more amplifiers, and so on.
+    - Several existing shapes have been enhanced; for example, logic gates have a variable number of inputs, transistors are more configurable, resistors can be shaped more, and more.
+    - You can style your circuit, changing relative sizes, default thickness and fill color, and more details of how you like your circuit to look; the same you can do with labels (voltages, currents, names of components and so on).
+    - A lot of bugs have been squashed; especially the (very complex) voltage direction conundrum has been clarified and you can choose your preferred style here too.
 
 A detailed list of changes can be seen below.
 
-
 * Version 1.0.0-pre3 (not released)
 
     - Added a Reed switch
diff --git a/Master/texmf-dist/doc/latex/circuitikz/changelog.tex b/Master/texmf-dist/doc/latex/circuitikz/changelog.tex
index af37be95ead..c1dac70eb8a 100644
--- a/Master/texmf-dist/doc/latex/circuitikz/changelog.tex
+++ b/Master/texmf-dist/doc/latex/circuitikz/changelog.tex
@@ -4,62 +4,76 @@ here. See \url{https://github.com/circuitikz/circuitikz/commits} for a
 full list of changes.
 
 \begin{itemize}
-\tightlist
+\item
+  Version 1.0.2 (2020-03-22)
+
+  \begin{itemize}
+  \tightlist
+  \item
+    added Schottky transistors (thanks to a suggestion by Jérôme
+    Monclard on GitHub)
+  \item
+    fixed formatting of \texttt{CHANGELOG.md}
+  \end{itemize}
 \item
   Version 1.0.1 (2020-02-22)
-\end{itemize}
 
-Minor fixes and addition to 1.0, in time to catch the freeze for TL2020.
+  Minor fixes and addition to 1.0, in time to catch the freeze for
+  TL2020.
 
-\begin{itemize}
-\item
-  add v1.0 version snapshots
-\item
-  added crossed generic impedance (suggested by Radványi Patrik Tamás)
-\item
-  added open barrier bipole (suggested by Radványi Patrik Tamás)
-\item
-  added two flags to flip the direction of light's arrows on LED and
-  photodiode (suggested by karlkappe on GitHub)
-\item
-  added a special key to help with precision loss in case of fractional
-  scaling (thanks to AndreaDiPietro92 on GitHub for noticing and
-  reporting, and to Schrödinger's cat for finding a fix)
-\item
-  fixed a nasty bug for the flat file generation for ConTeXt
+  \begin{itemize}
+  \tightlist
+  \item
+    add v1.0 version snapshots
+  \item
+    added crossed generic impedance (suggested by Radványi Patrik Tamás)
+  \item
+    added open barrier bipole (suggested by Radványi Patrik Tamás)
+  \item
+    added two flags to flip the direction of light's arrows on LED and
+    photodiode (suggested by karlkappe on GitHub)
+  \item
+    added a special key to help with precision loss in case of
+    fractional scaling (thanks to AndreaDiPietro92 on GitHub for
+    noticing and reporting, and to Schrödinger's cat for finding a fix)
+  \item
+    fixed a nasty bug for the flat file generation for ConTeXt
+  \end{itemize}
 \item
   Version 1.0 (2020-02-04)
-\end{itemize}
 
-And finally\ldots{} version 1.0 (2020-02-04) of \texttt{circuitikz} is
-released.
+  And finally\ldots{} version 1.0 (2020-02-04) of \texttt{circuitikz} is
+  released.
 
-The main updates since version 0.8.3, which was the last release before
-Romano started co-maintaining the project, are the following --- part
-coded by Romano, part by several collaborators around the internet:
+  The main updates since version 0.8.3, which was the last release
+  before Romano started co-maintaining the project, are the following
+  --- part coded by Romano, part by several collaborators around the
+  internet:
 
-\begin{itemize}
-\item
-  The manual has been reorganized and extended, with the addition of a
-  tutorial part; tens of examples have been added all over the map.
-\item
-  Around 74 new shapes where added. Notably, now there are chips,
-  mux-demuxes, multi-terminal transistors, several types of switches,
-  flip-flops, vacuum tubes, 7-segment displays, more amplifiers, and so
-  on.
-\item
-  Several existing shapes have been enhanced; for example, logic gates
-  have a variable number of inputs, transistors are more configurable,
-  resistors can be shaped more, and more.
-\item
-  You can style your circuit, changing relative sizes, default thickness
-  and fill color, and more details of how you like your circuit to look;
-  the same you can do with labels (voltages, currents, names of
-  components and so on).
-\item
-  A lot of bugs have been squashed; especially the (very complex)
-  voltage direction conundrum has been clarified and you can choose your
-  preferred style here too.
+  \begin{itemize}
+  \tightlist
+  \item
+    The manual has been reorganized and extended, with the addition of a
+    tutorial part; tens of examples have been added all over the map.
+  \item
+    Around 74 new shapes where added. Notably, now there are chips,
+    mux-demuxes, multi-terminal transistors, several types of switches,
+    flip-flops, vacuum tubes, 7-segment displays, more amplifiers, and
+    so on.
+  \item
+    Several existing shapes have been enhanced; for example, logic gates
+    have a variable number of inputs, transistors are more configurable,
+    resistors can be shaped more, and more.
+  \item
+    You can style your circuit, changing relative sizes, default
+    thickness and fill color, and more details of how you like your
+    circuit to look; the same you can do with labels (voltages,
+    currents, names of components and so on).
+  \item
+    A lot of bugs have been squashed; especially the (very complex)
+    voltage direction conundrum has been clarified and you can choose
+    your preferred style here too.
+  \end{itemize}
 \end{itemize}
 
 A detailed list of changes can be seen below.
diff --git a/Master/texmf-dist/doc/latex/circuitikz/circuitikzmanual.pdf b/Master/texmf-dist/doc/latex/circuitikz/circuitikzmanual.pdf
index ded6de75ca5..28e478825c0 100644
--- a/Master/texmf-dist/doc/latex/circuitikz/circuitikzmanual.pdf
+++ b/Master/texmf-dist/doc/latex/circuitikz/circuitikzmanual.pdf
diff --git a/Master/texmf-dist/doc/latex/circuitikz/circuitikzmanual.tex b/Master/texmf-dist/doc/latex/circuitikz/circuitikzmanual.tex
index 1475ffc16f0..dbd67b0d3c3 100644
--- a/Master/texmf-dist/doc/latex/circuitikz/circuitikzmanual.tex
+++ b/Master/texmf-dist/doc/latex/circuitikz/circuitikzmanual.tex
@@ -2350,9 +2350,11 @@ To show that a device is optional, you can dash it. The inner symbol will be kep
 \begin{groupdesc}
     \circuitdesc{npn}{npn}{Q}( B/180/0.2,C/0/0.2,E/0/0.2 )
     \circuitdesc{pnp}{pnp}{}
+    \circuitdesc{npn, schottky base}{schottky npn}{}
+    \circuitdesc{pnp, schottky base}{schottky pnp}{}
     \circuitdesc{npn, bodydiode}{npn}{}(body C in/60/0.2, body E in/-60/0.2,body C out/0/0.3, body E out/-0/0.3)
-    \circuitdesc{npn,photo}{npn}{}( nobase/0/0.4 )
-    \circuitdesc{pnp,photo}{pnp}{}
+    \circuitdesc{npn,photo}{photo npn}{}( nobase/0/0.4 )
+    \circuitdesc{pnp,photo}{photo pnp}{}
     \circuitdesc{nigbt}{nigbt}{Q}
     \circuitdesc{pigbt}{pigbt}{}
     \circuitdesc{Lnigbt}{Lnigbt}{Q}
@@ -2364,7 +2366,7 @@ To show that a device is optional, you can dash it. The inner symbol will be kep
 
 In addition to the standard BJTs transistors, since version~\texttt{0.9.6} the \texttt{bjtnpn} and \texttt{bjtpnp} are also available; these are devices where you can have more collectors and emitters (on the other hand, they have no \texttt{photo} nor \texttt{bodydiode} options --- they are silently ignored).
 
-Basically they are the same as the normal \texttt{npn} and \texttt{pnp}, and they (by default) have similar sizes; the options \texttt{collectors} and \texttt{emitters} will change the number of the relative terminals. The base terminal is connected midway from the collector and the emitter, \emph{not} on the center of the base; a \texttt{cbase} anchor is available if you prefer to use it. The label of the component (the text) is set on the right side, vertically centered around the base terminal.
+Basically they are the same as the normal \texttt{npn} and \texttt{pnp}, and they (by default) have similar sizes; the options \texttt{collectors} and \texttt{emitters} will change the number of the relative terminals. The base terminal is connected midway from the collector and the emitter, \emph{not} on the center of the base; a \texttt{cbase} anchor is available if you prefer to use it. The label of the component (the text) is set on the right side, vertically centered around the base terminal. They will accept the \texttt{schottky base} key.
 
 \begin{groupdesc}
     \circuitdesc{bjtnpn, collectors=1, emitters=2}{bjt npn}{Q}(B/180/0.2, C/45/0.2, E/-45/0.2, C1/0/0.4, E1/0/0.4, E2/0/0.4, nobase/135/0.4, cbase/-135/0.4, center/0/0.6)
@@ -2487,6 +2489,23 @@ You can use the \texttt{body ...} anchors to add more or different things to the
 \end{circuitikz}
 \end{LTXexample}
 
+\paragraph{Schottky transistors.}
+The Schottky transistors are generated by adding the \texttt{schottky base} key (there is also a \texttt{no schottky base} key that can be used if you use the other one as a default).
+You can change the size of the Schottky ``hook'' changing the parameter \texttt{tripoles/schottky base size} with \verb|\ctikzset{}| (default \texttt{0.07}; the unit is the standard resistor length, scaled if needed.)
+
+\begin{LTXexample}[varwidth=true]
+    \begin{circuitikz}
+        \draw (0,4) node[npn]{}
+            ++(2,0) node[npn, schottky base]{};
+        \draw (1,2) node[bjtnpn, collectors=2, emitters=3,
+            schottky base, rotate=90]{};
+        \tikzset{schottky base}
+        \ctikzset{tripoles/schottky base size=0.1}
+        \draw (0,0) node[pnp]{}
+            ++(2,0) node[npn, no schottky base]{};
+    \end{circuitikz}
+\end{LTXexample}
+
 \paragraph{Base/Gate terminal.} The Base/Gate connection of all transistors can be disabled by the options \textit{nogate} or \textit{nobase}, respectively. The Base/Gate anchors are floating, but there is an additional anchor \texttt{nogate}/\texttt{nobase} , which can be used to point to the unconnected base:
 \begin{LTXexample}[varwidth=true]
 \begin{circuitikz}
diff --git a/Master/texmf-dist/tex/context/third/circuitikz/t-circuitikz.tex b/Master/texmf-dist/tex/context/third/circuitikz/t-circuitikz.tex
index f3984d02ee0..ac8bbf4296a 100644
--- a/Master/texmf-dist/tex/context/third/circuitikz/t-circuitikz.tex
+++ b/Master/texmf-dist/tex/context/third/circuitikz/t-circuitikz.tex
@@ -10,8 +10,8 @@
 %
 % See the files gpl-3.0_license.txt and lppl-1-3c_license.txt for more details.
 
-\def\pgfcircversion{1.0.1}
-\def\pgfcircversiondate{2020/02/22}
+\def\pgfcircversion{1.0.2}
+\def\pgfcircversiondate{2020/03/22}
 \writestatus{loading}{\pgfcircversiondate{} The CircuiTikz circuit drawing package version \pgfcircversion}
 
 \usemodule[tikz]
diff --git a/Master/texmf-dist/tex/generic/circuitikz/pgfcirc.defines.tex b/Master/texmf-dist/tex/generic/circuitikz/pgfcirc.defines.tex
index ae0f8ee6426..ad86e496271 100644
--- a/Master/texmf-dist/tex/generic/circuitikz/pgfcirc.defines.tex
+++ b/Master/texmf-dist/tex/generic/circuitikz/pgfcirc.defines.tex
@@ -801,6 +801,15 @@
 \pgfkeys{/tikz/nobase/.add code={}{\pgf@circuit@bpt@drawgatefalse}}
 \ctikzset{nobase/.add code={}{\pgf@circuit@bpt@drawgatefalse}}
 
+% Option draw bpt with schottky base
+\newif\ifpgf@circuit@bpt@schottky
+\pgf@circuit@bpt@schottkyfalse
+\pgfkeys{/tikz/schottky base/.add code={}{\pgf@circuit@bpt@schottkytrue}}
+\ctikzset{schottky base/.add code={}{\pgf@circuit@bpt@schottkytrue}}
+\pgfkeys{/tikz/no schottky base/.add code={}{\pgf@circuit@bpt@schottkyfalse}}
+\ctikzset{no schottky base/.add code={}{\pgf@circuit@bpt@schottkyfalse}}
+\ctikzset{tripoles/schottky base size/.initial=0.07}
+
 % Option draw bpt without base connection
 \newif\ifpgf@circuit@bpt@drawbase
 \pgf@circuit@bpt@drawbasetrue
diff --git a/Master/texmf-dist/tex/generic/circuitikz/pgfcirctripoles.tex b/Master/texmf-dist/tex/generic/circuitikz/pgfcirctripoles.tex
index 9957fdee5af..672cbf78b03 100644
--- a/Master/texmf-dist/tex/generic/circuitikz/pgfcirctripoles.tex
+++ b/Master/texmf-dist/tex/generic/circuitikz/pgfcirctripoles.tex
@@ -1699,6 +1699,7 @@
         {\ctikzvalof{tripoles/#1/base height 2}\pgf@circ@res@up}}
         \pgfusepath{draw}
 
+        % drawing base
         \pgfscope
             \pgfpathmoveto{\pgfpoint
                 {\ctikzvalof{tripoles/#1/base width}\pgf@circ@res@left}
@@ -1707,6 +1708,42 @@
                 {\ctikzvalof{tripoles/#1/base width}\pgf@circ@res@left}
             {\ctikzvalof{tripoles/#1/base height}\pgf@circ@res@down}}
             \pgf@circ@setlinewidth{tripoles}{\pgflinewidth}
+            \ifpgf@circuit@bpt@schottky
+                % upper
+                \pgfpathmoveto{\pgfpoint
+                    {\ctikzvalof{tripoles/#1/base width}\pgf@circ@res@left}
+                    {\ctikzvalof{tripoles/#1/base height}\pgf@circ@res@up}}
+                \pgfpathlineto{\pgfpoint
+                    {\ctikzvalof{tripoles/#1/base width}\pgf@circ@res@left}
+                    {\ctikzvalof{tripoles/#1/base height}\pgf@circ@res@up+
+                    \ctikzvalof{tripoles/schottky base size}\pgf@circ@scaled@Rlen}}
+                \pgfpathlineto{\pgfpoint
+                    {\ctikzvalof{tripoles/#1/base width}\pgf@circ@res@left+
+                        \ctikzvalof{tripoles/schottky base size}\pgf@circ@scaled@Rlen}
+                    {\ctikzvalof{tripoles/#1/base height}\pgf@circ@res@up+
+                        \ctikzvalof{tripoles/schottky base size}\pgf@circ@scaled@Rlen}}
+                \pgfpathlineto{\pgfpoint
+                    {\ctikzvalof{tripoles/#1/base width}\pgf@circ@res@left+
+                        \ctikzvalof{tripoles/schottky base size}\pgf@circ@scaled@Rlen}
+                    {\ctikzvalof{tripoles/#1/base height}\pgf@circ@res@up}}
+                % % lower
+                \pgfpathmoveto{\pgfpoint
+                    {\ctikzvalof{tripoles/#1/base width}\pgf@circ@res@left}
+                    {\ctikzvalof{tripoles/#1/base height}\pgf@circ@res@down}}
+                \pgfpathlineto{\pgfpoint
+                    {\ctikzvalof{tripoles/#1/base width}\pgf@circ@res@left}
+                    {\ctikzvalof{tripoles/#1/base height}\pgf@circ@res@down-
+                    \ctikzvalof{tripoles/schottky base size}\pgf@circ@scaled@Rlen}}
+                \pgfpathlineto{\pgfpoint
+                    {\ctikzvalof{tripoles/#1/base width}\pgf@circ@res@left-
+                        \ctikzvalof{tripoles/schottky base size}\pgf@circ@scaled@Rlen}
+                    {\ctikzvalof{tripoles/#1/base height}\pgf@circ@res@down-
+                    \ctikzvalof{tripoles/schottky base size}\pgf@circ@scaled@Rlen}}
+                \pgfpathlineto{\pgfpoint
+                    {\ctikzvalof{tripoles/#1/base width}\pgf@circ@res@left-
+                        \ctikzvalof{tripoles/schottky base size}\pgf@circ@scaled@Rlen}
+                    {\ctikzvalof{tripoles/#1/base height}\pgf@circ@res@down}}
+                \fi
             \pgfusepath{draw}
         \endpgfscope
 
@@ -2027,6 +2064,42 @@
                     {\ctikzvalof{tripoles/bjt/base width}\pgf@circ@res@left}
                     {\ctikzvalof{tripoles/bjt/base height}\pgf@circ@res@down-(\numdown-1)*\multistep}}
                 \pgf@circ@setlinewidth{tripoles}{\pgflinewidth}
+                \ifpgf@circuit@bpt@schottky
+                    % upper
+                    \pgfpathmoveto{\pgfpoint
+                        {\ctikzvalof{tripoles/bjt/base width}\pgf@circ@res@left}
+                        {\ctikzvalof{tripoles/bjt/base height}\pgf@circ@res@up+(\numup-1)*\multistep}}
+                    \pgfpathlineto{\pgfpoint
+                        {\ctikzvalof{tripoles/bjt/base width}\pgf@circ@res@left}
+                        {\ctikzvalof{tripoles/bjt/base height}\pgf@circ@res@up+(\numup-1)*\multistep+
+                        \ctikzvalof{tripoles/schottky base size}\pgf@circ@scaled@Rlen}}
+                    \pgfpathlineto{\pgfpoint
+                        {\ctikzvalof{tripoles/bjt/base width}\pgf@circ@res@left+
+                            \ctikzvalof{tripoles/schottky base size}\pgf@circ@scaled@Rlen}
+                        {\ctikzvalof{tripoles/bjt/base height}\pgf@circ@res@up+(\numup-1)*\multistep+
+                            \ctikzvalof{tripoles/schottky base size}\pgf@circ@scaled@Rlen}}
+                    \pgfpathlineto{\pgfpoint
+                        {\ctikzvalof{tripoles/bjt/base width}\pgf@circ@res@left+
+                            \ctikzvalof{tripoles/schottky base size}\pgf@circ@scaled@Rlen}
+                        {\ctikzvalof{tripoles/bjt/base height}\pgf@circ@res@up+(\numup-1)*\multistep}}
+                    % lower
+                    \pgfpathmoveto{\pgfpoint
+                        {\ctikzvalof{tripoles/bjt/base width}\pgf@circ@res@left}
+                        {\ctikzvalof{tripoles/bjt/base height}\pgf@circ@res@down-(\numdown-1)*\multistep}}
+                    \pgfpathlineto{\pgfpoint
+                        {\ctikzvalof{tripoles/bjt/base width}\pgf@circ@res@left}
+                        {\ctikzvalof{tripoles/bjt/base height}\pgf@circ@res@down-(\numdown-1)*\multistep-
+                        \ctikzvalof{tripoles/schottky base size}\pgf@circ@scaled@Rlen}}
+                    \pgfpathlineto{\pgfpoint
+                        {\ctikzvalof{tripoles/bjt/base width}\pgf@circ@res@left-
+                            \ctikzvalof{tripoles/schottky base size}\pgf@circ@scaled@Rlen}
+                        {\ctikzvalof{tripoles/bjt/base height}\pgf@circ@res@down-(\numdown-1)*\multistep-
+                        \ctikzvalof{tripoles/schottky base size}\pgf@circ@scaled@Rlen}}
+                    \pgfpathlineto{\pgfpoint
+                        {\ctikzvalof{tripoles/bjt/base width}\pgf@circ@res@left-
+                            \ctikzvalof{tripoles/schottky base size}\pgf@circ@scaled@Rlen}
+                        {\ctikzvalof{tripoles/bjt/base height}\pgf@circ@res@down-(\numdown-1)*\multistep}}
+                \fi
                 \pgfsetroundcap % I like it more...
                 \pgfusepath{draw}
             \endpgfscope
diff --git a/Master/texmf-dist/tex/latex/circuitikz/circuitikz.sty b/Master/texmf-dist/tex/latex/circuitikz/circuitikz.sty
index 0460d13c900..74d8e070ba5 100644
--- a/Master/texmf-dist/tex/latex/circuitikz/circuitikz.sty
+++ b/Master/texmf-dist/tex/latex/circuitikz/circuitikz.sty
@@ -12,8 +12,8 @@
 
 \NeedsTeXFormat{LaTeX2e}
 
-\def\pgfcircversion{1.0.1}
-\def\pgfcircversiondate{2020/02/22}
+\def\pgfcircversion{1.0.2}
+\def\pgfcircversiondate{2020/03/22}
 
 \ProvidesPackage{circuitikz}%
 [\pgfcircversiondate{} The CircuiTikz circuit drawing package version \pgfcircversion]