trunk/Master/texmf-dist/source/latex/listliketab

git-svn-id: svn://tug.org/texlive/trunk@360 c570f23f-e606-0410-a88d-b1316a301751

2 files changed, 610 insertions, 0 deletions

diff --git a/Master/texmf-dist/source/latex/listliketab/listliketab.dtx b/Master/texmf-dist/source/latex/listliketab/listliketab.dtx
new file mode 100644
index 00000000000..4c81e0d6dd0
--- /dev/null
+++ b/Master/texmf-dist/source/latex/listliketab/listliketab.dtx
@@ -0,0 +1,555 @@
+% \iffalse meta-comment
+%
+% Copyright (C) 2005 by Scott Pakin <scott+llt@pakin.org>
+% -------------------------------------------------------
+%
+% This file may be distributed and/or modified under the
+% conditions of the LaTeX Project Public License, either version 1.2
+% of this license or (at your option) any later version.
+% The latest version of this license is in:
+%
+%    http://www.latex-project.org/lppl.txt
+%
+% and version 1.2 or later is part of all distributions of LaTeX
+% version 1999/12/01 or later.
+%
+% \fi
+%
+% \iffalse
+%<*driver>
+\ProvidesFile{listliketab.dtx}
+%</driver>
+%<package>\NeedsTeXFormat{LaTeX2e}[1999/12/01]
+%<package>\ProvidesPackage{listliketab}
+%<*package>
+    [2005/01/09 v1.0a Create list-like tabulars]
+%</package>
+%
+%<*driver>
+\documentclass{ltxdoc}
+\usepackage{listliketab}
+\usepackage{tabularx}
+\usepackage{amstext}
+\usepackage{hyperref}
+\EnableCrossrefs
+\CodelineIndex
+\RecordChanges
+\begin{document}
+  \DocInput{listliketab.dtx}
+  \phantomsection
+  \addcontentsline{toc}{section}{Change History}
+  \PrintChanges
+  \phantomsection
+  \addcontentsline{toc}{section}{Index}
+  \PrintIndex
+\end{document}
+%</driver>
+% \fi
+%
+% \CheckSum{100}
+%
+% \CharacterTable
+%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%   Digits        \0\1\2\3\4\5\6\7\8\9
+%   Exclamation   \!     Double quote  \"     Hash (number) \#
+%   Dollar        \$     Percent       \%     Ampersand     \&
+%   Acute accent  \'     Left paren    \(     Right paren   \)
+%   Asterisk      \*     Plus          \+     Comma         \,
+%   Minus         \-     Point         \.     Solidus       \/
+%   Colon         \:     Semicolon     \;     Less than     \<
+%   Equals        \=     Greater than  \>     Question mark \?
+%   Commercial at \@     Left bracket  \[     Backslash     \\
+%   Right bracket \]     Circumflex    \^     Underscore    \_
+%   Grave accent  \`     Left brace    \{     Vertical bar  \|
+%   Right brace   \}     Tilde         \~}
+%
+%
+% \changes{v1.0}{2000/09/08}{Initial version}
+% \changes{v1.0a}{2005/01/09}{Cleaned up the \string\texttt{.dtx} file}
+%
+% \GetFileInfo{listliketab.dtx}
+%
+% \DoNotIndex{\begin,\catcode,\DeclareRobustCommand,\def,\dp,\end}
+% \DoNotIndex{\expandafter,\gdef,\global,\hfill,\hspace,\ht}
+% \DoNotIndex{\ignorespaces,\ignorespacesafterend,\item}
+% \DoNotIndex{\newenvironment,\newlength,\newsavebox,\noindent}
+% \DoNotIndex{\ratio,\renewcommand,\setlength,\strip@pt,\strutbox}
+% \DoNotIndex{\vspace,\xdef}
+%
+%
+% \title{The \textsf{listliketab} package\thanks{This document
+%   corresponds to \textsf{listliketab}~\fileversion, dated \filedate.}}
+% \author{Scott Pakin \\ \texttt{scott+llt@pakin.org}}
+%
+% \hypersetup{^^A
+%   pdftitle={The listliketab package},
+%   pdfauthor={Scott Pakin <scott+llt@pakin.org>},
+%   pdfsubject={LaTeX package to make tabulars look like lists},
+%   pdfkeywords={tabulars, tables, lists, itemize, enumerate, columns}
+% }
+%
+% \maketitle
+% \sloppy
+%
+% ^^A Define an environment for command/environment delcarations.
+% \newsavebox{\declbox}
+% \newenvironment{decl}{%
+%   \begin{lrbox}{\declbox}\begin{tabular}{l}}{%
+%   \end{tabular}\end{lrbox}%
+%   \vspace{3ex}\noindent\hspace*{-3em}\fbox{\usebox{\declbox}}\vspace*{2ex}}
+%
+% \begin{abstract}
+%   The \texttt{listliketab} package helps the user make list-like
+%   \texttt{tabular}s, i.e., a \texttt{tabular} that is indistinguishable
+%   from an \texttt{itemize} or \texttt{enumerate} environment.
+%   The advantage of using a \texttt{tabular} is that the user can add
+%   additional columns to each entry in the list.
+% \end{abstract}
+%
+% \section{Introduction}
+%
+% Here's an itemized list:
+%
+% \begin{itemize}
+%   \item Fee
+%   \item Fi
+%   \item Fo
+%   \item Fum
+% \end{itemize}
+%
+% \noindent
+% Here's another itemized list:
+%
+% \storestyleof{itemize}
+% \begin{listliketab}
+% \begin{tabular}{LlR}
+%   \textbullet & Fee \\
+%   \textbullet & Fi \\
+%   \textbullet & Fo \\
+%   \textbullet & Fum
+% \end{tabular}
+% \end{listliketab}
+%
+% What's the difference?  The two look identical, but the first was typeset
+% in the ordinary way, with an \texttt{itemize} environment.  The second
+% was typeset within a \texttt{tabular} environment, using the
+% \texttt{listliketab} package.  Because the second is a \texttt{tabular},
+% it can contain additional columns on each line:
+%
+% \begin{listliketab}
+% \begin{tabular}{Ll@{\hspace*{2cm}}|lR}
+%   \textbullet & Fee &
+%      We can have additional text (and rules) with each item. \\
+%   \textbullet & Fi &
+%      Try doing \emph{that} in an \texttt{itemize} environment! \\
+%   \textbullet & Fo \\
+%   \textbullet & Fum &
+%      Not so easy, is it?
+% \end{tabular}
+% \end{listliketab}
+%
+% \texttt{listliketab} works with enumerated lists, too:
+%
+% \storestyleof{enumerate}
+% \begin{listliketab}
+% \newcounter{lltenum}\setcounter{lltenum}{0}
+% \newcommand{\nextnum}{\addtocounter{lltenum}{1}\thelltenum.}
+% \begin{tabularx}{\linewidth}{LX@{\qquad}lR}
+%           & & \multicolumn{1}{c}{Due date} \\ \cline{3-3}
+%   \nextnum & Clean desk.                                   & 2005/01/10 \\
+%   \nextnum & Sort ``in'' pile.                             & 2005/01/11 \\
+%   \nextnum & Discard random applications from ``in'' pile. & 2005/01/11 \\
+%   \nextnum & Move applications from ``in'' pile to ``out'' pile, stamping
+%             each one with a different official-looking stamp.
+%                                                            & 2005/01/15 \\
+%   \nextnum & Write and mail meaningless memos.             & 2005/01/16 \\
+%   \nextnum & Update r\'esum\'e.                            & 2005/01/20 \\
+% \end{tabularx}
+% \end{listliketab}
+%
+% \section{Usage}
+%
+% There are two steps involved in making list-like \texttt{tabulars}:
+% First, you store a list environment's parameters.  And second, you
+% create a \texttt{tabular} using the stored parameters.  The following
+% are the commands and environments needed to perform these operations.
+%
+% \begin{decl}
+%   |\storestyleof| \marg{environment}
+% \end{decl}
+%
+% |\storestyleof| is the easier to use of the two commands that store a list's
+% formatting style.  Merely pass this command the name of an existing list
+% environment---generally either \texttt{itemize} or \texttt{enumerate}---as
+% its \meta{environment} parameter.  |\storestyleof| will then remember the
+% formatting of that list environment for later use in a \texttt{tabular}.
+%
+% \begin{decl}
+%   |\storeliststyle|
+% \end{decl}
+%
+% Sometimes, you have a list environment that takes parameters.
+% |\storestyleof| has no mechanism for passing parameters to such an
+% environment.  In this situation, you can manually create a list of the
+% appropriate type and call |\storeliststyle| from within that list.
+% For example:
+%
+% \begin{verbatim}
+%     \begin{mylistenvironment}{something}{something else}
+%       \item[] \storeliststyle{}
+%     \end{mylistenvironment}
+% \end{verbatim}
+% \vspace*{-\baselineskip}
+%
+% Note that the above will probably leave some blank space in your document.
+% |\storestyleof|---which uses |\storeliststyle|, incidentally---gets around
+% that problem by building the list within a \texttt{minipage} within an
+% \texttt{lrbox}.  As you can tell, |\storestyleof| is a lot more convenient
+% to use, when applicable.
+%
+% \begin{decl}
+%   |\begin{listliketab}| \\
+%   \meta{tabular} \\
+%   |\end{listliketab}|
+% \end{decl}
+%
+% Once you've stored a list environment's style with |\storestyleof| or
+% |\storeliststyle|, you're ready to typeset list-like \texttt{tablular}s.
+% The \texttt{listliketab} environment adjusts the internal and external
+% spacing of a \texttt{tablular} to match that of the previously given list.
+% It also defines two new field types: |L| and |R|\@.  |L| inserts spacing
+% corresponding to the list's left margin, a right-justified parbox of the
+% same size as the list's label field, and spacing to separate the label
+% from the remaining fields.  |R| inserts spacing corresponding to the list's
+% right margin, and is more useful in \texttt{tabularx} environments than
+% in ordinary \texttt{tabular}s.
+%
+% Speaking of which, the \meta{tabular} you put inside \texttt{listliketab}
+% can be any environment that's compatible with the \texttt{array} package.
+% This includes \texttt{tabular}, \texttt{tabularx}, \texttt{longtable}, and
+% probably others, as well.  Basically, \texttt{listliketab} needs to call
+% |\newcolumntype| to define the |L| and |R| fields.
+%
+% The styles stored by |\storestyleof| and |\storeliststyle| are valid
+% until the next call to one of those commands.  Hence, any number of
+% \texttt{listliketab} environments can follow a single  |\storestyleof|
+% or |\storeliststyle|.
+%
+% \section{Examples}
+%
+% Here's a simple bullet list:
+%
+% \begin{verbatim}
+%    \storestyleof{itemize}
+%    \begin{listliketab}
+%    \begin{tabular}{Ll}
+%      \textbullet & One \\
+%      \textbullet & Two \\
+%      \textbullet & Three \\
+%    \end{tabular}
+%    \end{listliketab}
+% \end{verbatim}
+% \vspace*{-\baselineskip}
+%
+% \noindent
+% and its output:
+%
+%    \storestyleof{itemize}
+%    \begin{listliketab}
+%    \begin{tabular}{Ll}
+%      \textbullet & One \\
+%      \textbullet & Two \\
+%      \textbullet & Three \\
+%    \end{tabular}
+%    \end{listliketab}
+%
+% \bigskip\noindent
+% Here's an enumerated list that contains multiple columns after the label:
+%
+% \begin{verbatim}
+%    \storestyleof{enumerate}
+%    \begin{listliketab}
+%      \newcounter{tabenum}\setcounter{tabenum}{0}
+%      \newcommand{\nextnum}{\addtocounter{tabenum}{1}\thetabenum.}
+%      \begin{tabular}{L>{\bf}l@{~or~}>{\bf}l@{~or~}>{\bf}l}
+%        \nextnum & Red   & green & blue \\
+%        \nextnum & Short & stout & tall \\
+%        \nextnum & Happy & sad   & confused \\
+%      \end{tabular}
+%    \end{listliketab}
+% \end{verbatim}
+% \vspace*{-\baselineskip}
+%
+% \noindent
+% and what it produces:
+%
+%    \storestyleof{enumerate}
+%    \begin{listliketab}
+%      \newcounter{tabenum}\setcounter{tabenum}{0}
+%      \newcommand{\nextnum}{\addtocounter{tabenum}{1}\thetabenum.}
+%      \begin{tabular}{L>{\bf}l@{~or~}>{\bf}l@{~or~}>{\bf}l}
+%        \nextnum & Red   & green & blue \\
+%        \nextnum & Short & stout & tall \\
+%        \nextnum & Happy & sad   & confused \\
+%      \end{tabular}
+%    \end{listliketab}
+%
+% \bigskip\noindent
+% And finally, here's an example using \texttt{tabularx}:
+%
+% \begin{verbatim}
+%    \storestyleof{itemize}
+%    \begin{listliketab}
+%      \begin{tabularx}{0.5\linewidth}{%
+%          LX@{\raisebox{-2pt}{\framebox(12,12){}}}R}
+%        \textbullet & Milk \\
+%        \textbullet & Flour \\
+%        \textbullet & Sugar \\
+%        \textbullet & Butter \\
+%        \textbullet & Eggs \\
+%      \end{tabularx}
+%    \end{listliketab}
+% \end{verbatim}
+% \vspace*{-\baselineskip}
+%
+% \noindent
+% and the generated list:
+%
+%    \storestyleof{itemize}
+%    \begin{listliketab}
+%      \begin{tabularx}{0.5\linewidth}{%
+%          LX@{\raisebox{-2pt}{\framebox(12,12){}}}R}
+%        \textbullet & Milk \\
+%        \textbullet & Flour \\
+%        \textbullet & Sugar \\
+%        \textbullet & Butter \\
+%        \textbullet & Eggs \\
+%      \end{tabularx}
+%    \end{listliketab}
+%
+% \StopEventually{^^A
+%   \section{Future work}
+%
+%   The \texttt{listliketab} environment is too inflexible in terms of
+%   defining the |L| and |R| column types for the user's \texttt{tabular}
+%   environments.  First, the user should be able to choose what letters
+%   to use, in case he has already assigned a meaning to |L| or |R|\@.
+%   Second, |L| always formats the label as a right-justified parbox,
+%   while there may be a case in which the user wants the label to be
+%   formatted differently.
+%
+%   The next limitation that should be addressed in a later version of
+%   \texttt{listliketab} is that the user must manually insert
+%   |\textbullet|s (when mimicking \texttt{itemize}) or numbers (when
+%   mimicking \texttt{enumerate}) into the ``label'' field of his
+%   \texttt{tabular}.  It would be nice if the \texttt{listliketab}
+%   environment could do this automatically.
+%
+%   Finally, there is no support for nested lists.  Those would probably
+%   be tricky to mimic properly in a \texttt{tabular}, but could
+%   occasionally be useful to have.
+% }
+%
+%
+% \section{Implementation}
+%
+% This section contains the complete source code for \texttt{listliketab}.
+% Most users will not get much out of it, but it should be of use to
+% those who need more precise documentation and those who want to extend
+% the \texttt{listliketab} package.
+%
+% \subsection{Required packages}
+% \label{sec:packages}
+%
+% \texttt{listliketab} requires that the following packages be loaded:
+%
+%    \begin{macrocode}
+\RequirePackage{calc}
+\RequirePackage{array}
+%    \end{macrocode}
+%
+% \subsection{List parameter storage}
+%
+% Once we're inside a list environment, we'll need some (global) locations
+% in which to store the local values of various list parameters.
+%
+% \begin{macro}{\llt@labelwidth}
+% \begin{macro}{\llt@labelsep}
+% \begin{macro}{\llt@topsep}
+% \begin{macro}{\llt@rightmargin}
+% These are the global equivalents of |\labelwidth|, |\labelsep|, |\topsep|,
+% and |\rightmargin|, respectively.  They're stored by the |\storeliststyle|
+% command from within a list environment.
+%    \begin{macrocode}
+\newlength{\llt@labelwidth}
+\newlength{\llt@labelsep}
+\newlength{\llt@topsep}
+\newlength{\llt@rightmargin}
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\llt@tab@indent}
+% |\llt@tab@indent| is the indentation of the entire list.  It
+% corresponds to the space to the left of the label or, more precisely,
+% |\leftmargin|-|\labelsep|-|\labelwidth|.
+%    \begin{macrocode}
+\newlength{\llt@tab@indent}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\llt@bot@sep}
+% |\llt@bot@sep| is the amount of space to add at the end of a list.
+% It is set to |\itemsep|+|\parsep| by |\storeliststyle|.
+% (I'm not actually positive this is the right amount of space to add,
+% but it looks okay to me.)
+%    \begin{macrocode}
+\newlength{\llt@bot@sep}
+%    \end{macrocode}
+% \end{macro}
+%
+% \subsection{Other variables}
+%
+% \begin{macro}{\llt@arraystretch}
+% \begin{macro}{\llt@arraystretch@clean}
+% |\llt@arraystretch| is the value we need to assign to |\arraystretch| to
+% make \texttt{tabular} spacing mimic the spacing used in the given list.
+% |\llt@arraystretch@clean| is the same as |\llt@arraystretch|, except it
+% is ordinary text instead of a length and does not end in ``|pt|''.
+%    \begin{macrocode}
+\newlength{\llt@arraystretch}
+\def\llt@arraystretch@clean{}
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\llt@list@box}
+% This box is used by |\storestyleof| to hold a throwaway list.
+%    \begin{macrocode}
+\newsavebox{\llt@list@box}
+%    \end{macrocode}
+% \end{macro}
+%
+% \subsection{Author commands and environments}
+%
+% \begin{macro}{\storeliststyle}
+% When |\storeliststyle| is invoked within a list environment, it does
+% two things.  First, it copies the current settings of various list
+% parameters into global variables, so they can be used outside the list.
+% And second, it calculates a value for |\arraystretch| to match the list's
+% inter-item spacing.
+%    \begin{macrocode}
+\DeclareRobustCommand{\storeliststyle}{
+%    \end{macrocode}
+% Storing list parameters is fairly straightforward.
+%    \begin{macrocode}
+  \setlength{\llt@tab@indent}{\leftmargin-\labelsep-\labelwidth}
+  \global\llt@tab@indent=\llt@tab@indent
+  \setlength{\llt@bot@sep}{\itemsep+\parsep}
+  \global\llt@bot@sep=\llt@bot@sep
+
+  \global\llt@labelwidth=\labelwidth
+  \global\llt@labelsep=\labelsep
+  \global\llt@rightmargin=\rightmargin
+  \global\llt@topsep=\topsep
+%    \end{macrocode}
+% Determining an appropriate value for |\arraystretch| takes a bit of
+% explanation.  Rows of a \texttt{tabular} environment normally have the
+% same height and depth as a strut.  Entries in a list are also one strut
+% high/deep, but are separated by |\itemsep|+|\parsep|'s worth of glue.
+% Hence, to get the new value of |\arraystretch|, we have to take:
+% \newcommand{\strutfunc}[1]{\text{#1}(\text{strut})}
+%    \begin{eqnarray*}
+%      |\arraystretch| & = & \frac{\text{total space between baselines in a
+%                                  list}}%
+%                                 {\text{total space between baselines in a
+%                                  \texttt{tabular}}} \\[2ex]
+%                      & = & \frac{\text{item height + item depth +
+%                                  inter-item spacing}}%
+%                                 {\text{row height + row depth}} \\[2ex]
+%                      & = & \frac{\strutfunc{height} + \strutfunc{depth} +
+%                                  \texttt{\bslash itemsep} +
+%                                  \texttt{\bslash parsep}}%
+%                                 {\strutfunc{height} + \strutfunc{depth}}
+%    \end{eqnarray*}
+%    \begin{macrocode}
+  \setlength{\llt@arraystretch}{%
+    1.0pt*\ratio{\ht\strutbox+\dp\strutbox+\itemsep+\parsep}
+                {\ht\strutbox+\dp\strutbox}}
+%    \end{macrocode}
+% |\arraystretch| takes a unitless fixed-point number as an argument.
+% Unfortunately, \TeX\ doesn't support such a thing.  So we use
+% \LaTeXe's |\strip@pt| macro to convert from a length to the equivalent
+% text, dropping the units in the process.
+% ^^A
+% \makeatletter
+% \changes{v1.0a}{2005/01/09}{Modified to use \string\LaTeXe's
+%   \string\texttt\string{\string\string\string\strip@pt\string} macro
+%   instead of defining the equivalent ourselves.}
+% \makeatother
+%    \begin{macrocode}
+  \xdef\llt@arraystretch@clean{\strip@pt\llt@arraystretch}%
+}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\storestyleof}
+% The problem with |\storeliststyle| is that it can be called only from
+% within a list.  What if you don't have a list to use as a template?  Well,
+% you have to make one.  Unfortunately, that list then winds up in your
+% document.  |\storestyleof| to the rescue!  This convenience function creates
+% a list of type |#1| (probably either \texttt{itemize} or \texttt{enumerate})
+% containing a call to |\storeliststyle|, but then discards the list
+% environment, so you never see it.  (More accurately, |\storelist|
+% constructs the list within an \texttt{lrbox} that it never typesets.)
+%    \begin{macrocode}
+\DeclareRobustCommand{\storestyleof}[1]{%
+  \begin{lrbox}{\llt@list@box}
+  \noindent
+  \begin{minipage}{\linewidth}
+    \begin{#1}
+      \item[] \storeliststyle{}
+    \end{#1}
+  \end{minipage}
+\end{lrbox}\ignorespacesafterend
+}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{environment}{listliketab}
+% The \texttt{listliketab} environment defines a new \texttt{tabular}
+% column type, |L|, which corresponds to the list's indentation, the label
+% (a right justified parbox), and the separation between the label and the
+% list body.  |L| should be the first field in the user's \texttt{tabular}
+% environment.  Similarly, \text{listliketab} defines |R|, which is the
+% spacing on the right side of the list.  |R| is useful when the user is
+% using \texttt{tabularx} instead of \texttt{tabular}.  In that case, a good
+% \texttt{tabularx} format string is ``|LXR|'', possibly with other fields
+% between the |X| and the |R|.
+%
+% \texttt{listliketab} also stretches the array appropriately and suppresses
+% paragraph indentation.  (The |L| field will ensure the \texttt{tabular} is
+% properly indented.)
+%    \begin{macrocode}
+\newenvironment{listliketab}{%
+  \newcolumntype{L}{%
+    @{\hspace*{\llt@tab@indent}}%
+    >{\hfill}p{\llt@labelwidth}%
+    @{\hspace*{\llt@labelsep}}}%
+  \newcolumntype{R}{%
+    @{\hspace*{\llt@rightmargin}}}%
+  \renewcommand{\arraystretch}{\llt@arraystretch@clean}%
+  \vspace{\llt@topsep}%
+  \noindent\ignorespaces
+}{%
+  \vspace{\llt@bot@sep}%
+}
+%    \end{macrocode}
+% \end{environment}
+%
+%
+% \Finale
+\endinput
diff --git a/Master/texmf-dist/source/latex/listliketab/listliketab.ins b/Master/texmf-dist/source/latex/listliketab/listliketab.ins
new file mode 100644
index 00000000000..826f3f30d77
--- /dev/null
+++ b/Master/texmf-dist/source/latex/listliketab/listliketab.ins
@@ -0,0 +1,55 @@
+%%
+%% Copyright (C) 2005 by Scott Pakin <scott+llt@pakin.org>
+%%
+%% This file may be distributed and/or modified under the conditions of
+%% the LaTeX Project Public License, either version 1.2 of this license
+%% or (at your option) any later version.  The latest version of this
+%% license is in:
+%%
+%%    http://www.latex-project.org/lppl.txt
+%%
+%% and version 1.2 or later is part of all distributions of LaTeX version
+%% 1999/12/01 or later.
+%%
+
+\input docstrip.tex
+\keepsilent
+
+\usedir{tex/latex/listliketab}
+
+\preamble
+
+This is a generated file.
+
+Copyright (C) 2005 by Scott Pakin <scott+llt@pakin.org>
+
+This file may be distributed and/or modified under the conditions of
+the LaTeX Project Public License, either version 1.2 of this license
+or (at your option) any later version.  The latest version of this
+license is in:
+
+   http://www.latex-project.org/lppl.txt
+
+and version 1.2 or later is part of all distributions of LaTeX version
+1999/12/01 or later.
+
+\endpreamble
+
+\generate{\file{listliketab.sty}{\from{listliketab.dtx}{package}}}
+
+\obeyspaces
+\Msg{*************************************************************}
+\Msg{*                                                           *}
+\Msg{* To finish the installation you have to move the following *}
+\Msg{* file into a directory searched by TeX:                    *}
+\Msg{*                                                           *}
+\Msg{*     listliketab.sty                                       *}
+\Msg{*                                                           *}
+\Msg{* To produce the documentation run the file listliketab.dtx *}
+\Msg{* through LaTeX.                                            *}
+\Msg{*                                                           *}
+\Msg{* Happy TeXing!                                             *}
+\Msg{*                                                           *}
+\Msg{*************************************************************}
+
+\endbatchfile