crosswrd update (1feb10)

git-svn-id: svn://tug.org/texlive/trunk@16896 c570f23f-e606-0410-a88d-b1316a301751
author: Karl Berry <karl@freefriends.org> 2010-02-01 23:43:36 +0000
committer: Karl Berry <karl@freefriends.org> 2010-02-01 23:43:36 +0000
commit: b5175a492edaae1f38dd15addcbfeccf76033194 (patch)
tree: 77937c49ab2cbb89c57955c2073d224c98fb9a4b /Master
parent: 3556ffda02def0f822bd81adaa1a0f331e850ed6 (diff)
11 files changed, 879 insertions, 688 deletions
diff --git a/Master/texmf-dist/doc/latex/crosswrd/README b/Master/texmf-dist/doc/latex/crosswrd/README
index 8df5c4b6a6c..e395d67cca0 100644
--- a/Master/texmf-dist/doc/latex/crosswrd/README
+++ b/Master/texmf-dist/doc/latex/crosswrd/README
@@ -1,5 +1,6 @@
 Copyright 1989 Brian Hamilton Kelly
-updated for LaTeX2e by Frank Mittelbach 96/12/06 
+updated for LaTeX2e by Frank Mittelbach 96/12/06
+upgraded with many new features by Dirk Laurie 10/02/01 
 
 This work may be distributed and/or modified under the
 conditions of the LaTeX Project Public License, either version 1.3
@@ -12,13 +13,36 @@ version 2005/12/01 or later.
 This work has the LPPL maintenance status `unmaintained'.
 
 This work consists of the files crosswrd.dtx, crosswrd.ins and README 
-and the derived files test0.tex, test1.tex, grid0.tex, grid1.tex and crosswrd.sty.
+and the derived files test0.tex, test1.tex, test2.tex, grid0.tex, 
+grid1.tex, grid2.tex and crosswrd.sty.
 
 Introduction
 ============
 
 This distribution contains the crosswrd package by Brian Hamilton
-Kelly updated to run with LaTeX2e the standard LaTeX distribution.
+Kelly updated to run with LaTeX2e the standard LaTeX distribution,
+and extended in several ways, one of which Brian himself envisaged
+but did not live to complete.  Brian died on 15th September 2005.
+
+Frank Mittelbach's comments and instructions (slightly updated) 
+follow after the hline.
+
+I added support for several new features, including barred grids,
+mixed barred/blocked grids, rectangular grids, automatic clue number
+checking and more, and composed a hard cryptic in the Azed/Mephisto
+style demonstrating those.
+
+For the next few months I am willing to support the package.
+
+Enjoy!
+
+Dirk Laurie  10/02/01
+
+PS If you can solve the hard thematic puzzle, let me know.  I'd like
+to add the names of the first few solvers to this README. 
+    dee pee ell at ess you en dot ay see dot zed ay
+
+-------------------------------------------------------------------
 
 I did change a bit of the coding to allow typesetting an unlimited
 number of crosswords and also added two new commands
@@ -32,21 +56,20 @@ Installation
 ============
 
 to unpack run
-
    latex crosswrd.ins
 
 to install place crosswrd.sty into dir searched by LaTeX
 
-to produce documentation (after unpacking) run
-
+to produce documentation (after unpacking) run 
    latex crosswrd.dtx
+until there is no "Rerun LaTeX" message
 
 to produce examples (after unpacking) run
-
    latex test0
-
 or 
    latex test1
+or
+   latex test2
 
 
 enjoy
diff --git a/Master/texmf-dist/doc/latex/crosswrd/crosswrd.pdf b/Master/texmf-dist/doc/latex/crosswrd/crosswrd.pdf
index cd81d4fa41c..30ddb0383f7 100644
--- a/Master/texmf-dist/doc/latex/crosswrd/crosswrd.pdf
+++ b/Master/texmf-dist/doc/latex/crosswrd/crosswrd.pdf
diff --git a/Master/texmf-dist/doc/latex/crosswrd/grid0.tex b/Master/texmf-dist/doc/latex/crosswrd/grid0.tex
index 690d41bf659..5e05af8170a 100644
--- a/Master/texmf-dist/doc/latex/crosswrd/grid0.tex
+++ b/Master/texmf-dist/doc/latex/crosswrd/grid0.tex
@@ -5,31 +5,33 @@
 %% The original source files were:
 %%
 %% crosswrd.dtx  (with options: `grid0')
-%% 
-%% Copyright 1989 Brian Hamilton Kelly
-%% updated for LaTeX2e by Frank Mittelbach 96/12/06
+%% Copyright C 1989 Brian Hamilton Kelly
 %% 
 %% crossword macros for LaTeX
+%% updated for LaTeX2e by Frank Mittelbach 96/12/06
+%% substantially extended by Dirk Laurie 08/01/18
 %% 
 %% for documentation run latex crosswrd.dtx
 %% 
-%% This work may be distributed and/or modified under the
-%% conditions of the LaTeX Project Public License, either version 1.3
-%% of this license or (at your option) any later version.
-%% The latest version of this license is in
-%%   http://www.latex-project.org/lppl.txt
-%% and version 1.3 or later is part of all distributions of LaTeX
-%% version 2005/12/01 or later.
+%% distribution consist of
 %% 
-%% This work has the LPPL maintenance status `unmaintained'.
+%%   crosswrd.dtx       source
+%%   crosswrd.ins       installation script
+%%   00readme
 %% 
-%% This work consists of the files crosswrd.dtx, crosswrd.ins and README
-%% and the derived files test0.tex, test1.tex, grid0.tex, grid1.tex and crosswrd.sty.
+%% don't distribute this file without distributing the above
+%% files as well
 %% 
 %% crosswrd.dtx
 %% Copyright 1989 Brian Hamilton Kelly
 %% updated for LaTeX2e by Frank Mittelbach 96/12/06
 %% Updated for LPPL 1.3c or later by Clea F. Rees (for Frank Mittelbach), 2008/10/06.
+%%
+%% Upgraded with many new features by Dirk Laurie 2010/02/01
+
+
+
+
 \clue{1}{A}{3}{1}{PERAMBULATOR}{Stroller carrying the baby}{12}
 \clue{8}{A}{1}{3}{IMPASSE}{Eastern note returned about predicament resulting
                            in deadlock}{7}
@@ -74,6 +76,8 @@
 \clue{22}{D}{7}{11}{MAHDI}{I would shortly overact, sent up, and the
                            downfall of Gordon}{5}
 
+
+
 \endinput
 %%
 %% End of file `grid0.tex'.
diff --git a/Master/texmf-dist/doc/latex/crosswrd/grid1.tex b/Master/texmf-dist/doc/latex/crosswrd/grid1.tex
index 82712add843..06dac322fb2 100644
--- a/Master/texmf-dist/doc/latex/crosswrd/grid1.tex
+++ b/Master/texmf-dist/doc/latex/crosswrd/grid1.tex
@@ -5,31 +5,33 @@
 %% The original source files were:
 %%
 %% crosswrd.dtx  (with options: `grid1')
-%% 
-%% Copyright 1989 Brian Hamilton Kelly
-%% updated for LaTeX2e by Frank Mittelbach 96/12/06
+%% Copyright C 1989 Brian Hamilton Kelly
 %% 
 %% crossword macros for LaTeX
+%% updated for LaTeX2e by Frank Mittelbach 96/12/06
+%% substantially extended by Dirk Laurie 08/01/18
 %% 
 %% for documentation run latex crosswrd.dtx
 %% 
-%% This work may be distributed and/or modified under the
-%% conditions of the LaTeX Project Public License, either version 1.3
-%% of this license or (at your option) any later version.
-%% The latest version of this license is in
-%%   http://www.latex-project.org/lppl.txt
-%% and version 1.3 or later is part of all distributions of LaTeX
-%% version 2005/12/01 or later.
+%% distribution consist of
 %% 
-%% This work has the LPPL maintenance status `unmaintained'.
+%%   crosswrd.dtx       source
+%%   crosswrd.ins       installation script
+%%   00readme
 %% 
-%% This work consists of the files crosswrd.dtx, crosswrd.ins and README
-%% and the derived files test0.tex, test1.tex, grid0.tex, grid1.tex and crosswrd.sty.
+%% don't distribute this file without distributing the above
+%% files as well
 %% 
 %% crosswrd.dtx
 %% Copyright 1989 Brian Hamilton Kelly
 %% updated for LaTeX2e by Frank Mittelbach 96/12/06
 %% Updated for LPPL 1.3c or later by Clea F. Rees (for Frank Mittelbach), 2008/10/06.
+%%
+%% Upgraded with many new features by Dirk Laurie 2010/02/01
+
+
+
+
 \clue{8}{A}{1}{2}{SWAM}{Points a thousand tested for witchcraft.}{4}
 \clue{9}{A}{6}{2}{OHO}{Gourmet's triumphant cry on finding middle-cut
                        Pacific salmon!}{3}
@@ -81,6 +83,8 @@
                              that's in bequest.}{6}
 \clue{24}{D}{2}{12}{MALL}{}{See {\bf 7}}
 
+
+
 \endinput
 %%
 %% End of file `grid1.tex'.
diff --git a/Master/texmf-dist/doc/latex/crosswrd/grid2.tex b/Master/texmf-dist/doc/latex/crosswrd/grid2.tex
new file mode 100644
index 00000000000..09545b5d22b
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/crosswrd/grid2.tex
@@ -0,0 +1,95 @@
+%%
+%% This is file `grid2.tex',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% crosswrd.dtx  (with options: `grid2')
+%% Copyright C 1989 Brian Hamilton Kelly
+%% 
+%% crossword macros for LaTeX
+%% updated for LaTeX2e by Frank Mittelbach 96/12/06
+%% substantially extended by Dirk Laurie 08/01/18
+%% 
+%% for documentation run latex crosswrd.dtx
+%% 
+%% distribution consist of
+%% 
+%%   crosswrd.dtx       source
+%%   crosswrd.ins       installation script
+%%   00readme
+%% 
+%% don't distribute this file without distributing the above
+%% files as well
+%% 
+%% crosswrd.dtx
+%% Copyright 1989 Brian Hamilton Kelly
+%% updated for LaTeX2e by Frank Mittelbach 96/12/06
+%% Updated for LPPL 1.3c or later by Clea F. Rees (for Frank Mittelbach), 2008/10/06.
+%%
+%% Upgraded with many new features by Dirk Laurie 2010/02/01
+
+
+
+
+
+
+    \unitlength 7mm
+    \let\numbersize\scriptsize
+    \centerline{\large{\textbf{T-shirt design} by Dirk Laurie}}
+    \def\Preamble{5 27, and that goes for 17 11 25 and 24A 10 too,
+I'm sure, so the unclued lights should be entered in red.
+The other lights are all
+in the rather ancient edition of Chambers consulted by the composer.}
+\clue{1}{A}{1}{1}{........}{Murderer's lip in an evil act}{8}
+\clue{6}{A}{9}{1}{.....}{Places where vehicles without
+   resistance get bogged down?}{5}
+\clue{10}{A}{2}{2}{..........}{}{}
+\clue{12}{A}{1}{3}{....}{Perhaps 27 die here}{4}
+\clue{14}{A}{5}{3}{.....}{Obstinate at first and after a smack}{5}
+\clue{15}{A}{10}{3}{....}{Seduced girl, as rumoured}{4}
+\clue{16}{A}{1}{5}{........}{Paid an unspecified amount in Johannesburg}{8}
+\clue{17 \noexpand\& 11D \noexpand\& 25D}{A}{9}{5}{.....}{}{See preamble}
+\clue{18}{A}{1}{6}{......}{Butt gives information in a peeve}{6,hyphenated}
+\clue{20}{A}{8}{6}{......}{Big folk appearing in spots last month}{6}
+\clue{24 \noexpand\& 10}{A}{1}{7}{.....}{}{See preamble}
+\clue{26}{A}{6}{7}{........}{Wince after European has knocked back medicine,
+leaving out some}{8}
+\clue{30}{A}{1}{9}{....}{Recidivist is back, getting old in here}{4}
+\clue{31}{A}{5}{9}{.....}{Unwilling to receive a small copper pot}{5}
+\clue{32}{A}{10}{9}{....}{Primal wilderness beside a person from the East
+ ``is Paradise ---''}{4}
+\clue{33}{A}{3}{10}{..........}{Denizen of Africa to suffer in the heat
+when dose insects get in}{10}
+\clue{34}{A}{1}{11}{.....}{Turn around at home and peek outside, like 18?}{5}
+\clue{35}{A}{6}{11}{........}{Such as these two from the back going
+   ahead in copious lovemaking}{8}
+\clue{1}{D}{1}{1}{......}{A disc full of French horn music}{6}
+\clue{2}{D}{2}{1}{....}{Drams served up in Highland drizzle}{4}
+\clue{3}{D}{4}{1}{......}{A gadfly with well-separated feet etc}{6,two words}
+\clue{4}{D}{5}{1}{......}{Not many shooting up, in fact only one}{6}
+\clue{5 \noexpand\& 27}{D}{7}{1}{.....}{}{See preamble,three words}
+\clue{6}{D}{9}{1}{.....}{Tree that will, having had root extracted
+at first, turn into mineral!}{5}
+\clue{7}{D}{10}{1}{....}{Give me a response that I can hear:
+  it's no longer a crisis}{4}
+\clue{8}{D}{12}{1}{......}{What unreformed head wears is right}{6}
+\clue{9}{D}{13}{1}{.....}{Dirk's parrot, found in polar regions}{5}
+\clue{11}{D}{11}{2}{........}{}{}
+\clue{13}{D}{3}{3}{........}{Saying "Be with you shortly", lassie goes inside
+house}{8}
+\clue{19}{D}{2}{6}{......}{Invest ten rand judiciously}{6}
+\clue{21}{D}{9}{6}{......}{Coin Dirk lost on the way up; Henry gets involved}{6}
+\clue{22}{D}{10}{6}{......}{Peek!}{6}
+\clue{23}{D}{13}{6}{......}{Neutral sounds and trite sayings arise all around Switzerland}{6}
+\clue{24}{D}{1}{7}{.....}{Servants genteel at heart?  One of them
+is the butler at Blandings Castle!}
+{5}
+\clue{25}{D}{5}{7}{.....}{}{}
+\clue{27}{D}{7}{7}{.....}{}{}
+\clue{28}{D}{4}{8}{....}{Serving up only half a beer is a mistake}{4}
+\clue{29}{D}{12}{8}{....}{Footplay before strong no-trump not allowed}{4}
+
+\endinput
+%%
+%% End of file `grid2.tex'.
diff --git a/Master/texmf-dist/doc/latex/crosswrd/test0.tex b/Master/texmf-dist/doc/latex/crosswrd/test0.tex
index 3a01aa275bb..e8d105e6ed8 100644
--- a/Master/texmf-dist/doc/latex/crosswrd/test0.tex
+++ b/Master/texmf-dist/doc/latex/crosswrd/test0.tex
@@ -5,31 +5,33 @@
 %% The original source files were:
 %%
 %% crosswrd.dtx  (with options: `exa0')
-%% 
-%% Copyright 1989 Brian Hamilton Kelly
-%% updated for LaTeX2e by Frank Mittelbach 96/12/06
+%% Copyright C 1989 Brian Hamilton Kelly
 %% 
 %% crossword macros for LaTeX
+%% updated for LaTeX2e by Frank Mittelbach 96/12/06
+%% substantially extended by Dirk Laurie 08/01/18
 %% 
 %% for documentation run latex crosswrd.dtx
 %% 
-%% This work may be distributed and/or modified under the
-%% conditions of the LaTeX Project Public License, either version 1.3
-%% of this license or (at your option) any later version.
-%% The latest version of this license is in
-%%   http://www.latex-project.org/lppl.txt
-%% and version 1.3 or later is part of all distributions of LaTeX
-%% version 2005/12/01 or later.
+%% distribution consist of
 %% 
-%% This work has the LPPL maintenance status `unmaintained'.
+%%   crosswrd.dtx       source
+%%   crosswrd.ins       installation script
+%%   00readme
 %% 
-%% This work consists of the files crosswrd.dtx, crosswrd.ins and README
-%% and the derived files test0.tex, test1.tex, grid0.tex, grid1.tex and crosswrd.sty.
+%% don't distribute this file without distributing the above
+%% files as well
 %% 
 %% crosswrd.dtx
 %% Copyright 1989 Brian Hamilton Kelly
 %% updated for LaTeX2e by Frank Mittelbach 96/12/06
 %% Updated for LPPL 1.3c or later by Clea F. Rees (for Frank Mittelbach), 2008/10/06.
+%%
+%% Upgraded with many new features by Dirk Laurie 2010/02/01
+
+
+
+
 \documentclass{article}
 \usepackage{crosswrd}
 \pagestyle{empty}
@@ -42,6 +44,8 @@
     \end{crossword}
 \end{document}
 
+
+
 \endinput
 %%
 %% End of file `test0.tex'.
diff --git a/Master/texmf-dist/doc/latex/crosswrd/test1.tex b/Master/texmf-dist/doc/latex/crosswrd/test1.tex
index 9df2cf39cf2..7b3da7f7123 100644
--- a/Master/texmf-dist/doc/latex/crosswrd/test1.tex
+++ b/Master/texmf-dist/doc/latex/crosswrd/test1.tex
@@ -5,31 +5,33 @@
 %% The original source files were:
 %%
 %% crosswrd.dtx  (with options: `exa1')
-%% 
-%% Copyright 1989 Brian Hamilton Kelly
-%% updated for LaTeX2e by Frank Mittelbach 96/12/06
+%% Copyright C 1989 Brian Hamilton Kelly
 %% 
 %% crossword macros for LaTeX
+%% updated for LaTeX2e by Frank Mittelbach 96/12/06
+%% substantially extended by Dirk Laurie 08/01/18
 %% 
 %% for documentation run latex crosswrd.dtx
 %% 
-%% This work may be distributed and/or modified under the
-%% conditions of the LaTeX Project Public License, either version 1.3
-%% of this license or (at your option) any later version.
-%% The latest version of this license is in
-%%   http://www.latex-project.org/lppl.txt
-%% and version 1.3 or later is part of all distributions of LaTeX
-%% version 2005/12/01 or later.
+%% distribution consist of
 %% 
-%% This work has the LPPL maintenance status `unmaintained'.
+%%   crosswrd.dtx       source
+%%   crosswrd.ins       installation script
+%%   00readme
 %% 
-%% This work consists of the files crosswrd.dtx, crosswrd.ins and README
-%% and the derived files test0.tex, test1.tex, grid0.tex, grid1.tex and crosswrd.sty.
+%% don't distribute this file without distributing the above
+%% files as well
 %% 
 %% crosswrd.dtx
 %% Copyright 1989 Brian Hamilton Kelly
 %% updated for LaTeX2e by Frank Mittelbach 96/12/06
 %% Updated for LPPL 1.3c or later by Clea F. Rees (for Frank Mittelbach), 2008/10/06.
+%%
+%% Upgraded with many new features by Dirk Laurie 2010/02/01
+
+
+
+
 \documentclass{article}
 \usepackage{crosswrd}
 \pagestyle{empty}
@@ -38,7 +40,7 @@
 \begin{document}
     \section*{A Sample Crossword}
     \textit{(Chamber's Twentieth Century dictionary)}
-    \begin{crossword}{15}{?}
+    \begin{crossword}{15}{N}
       \input{grid1}
     \end{crossword}
     \begin{crossword*}{15}{Solution to grid 0}
@@ -46,6 +48,8 @@
     \end{crossword*}
 \end{document}
 
+
+
 \endinput
 %%
 %% End of file `test1.tex'.
diff --git a/Master/texmf-dist/doc/latex/crosswrd/test2.tex b/Master/texmf-dist/doc/latex/crosswrd/test2.tex
new file mode 100644
index 00000000000..d9e388d90c5
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/crosswrd/test2.tex
@@ -0,0 +1,50 @@
+%%
+%% This is file `test2.tex',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% crosswrd.dtx  (with options: `exa2')
+%% Copyright C 1989 Brian Hamilton Kelly
+%% 
+%% crossword macros for LaTeX
+%% updated for LaTeX2e by Frank Mittelbach 96/12/06
+%% substantially extended by Dirk Laurie 08/01/18
+%% 
+%% for documentation run latex crosswrd.dtx
+%% 
+%% distribution consist of
+%% 
+%%   crosswrd.dtx       source
+%%   crosswrd.ins       installation script
+%%   00readme
+%% 
+%% don't distribute this file without distributing the above
+%% files as well
+%% 
+%% crosswrd.dtx
+%% Copyright 1989 Brian Hamilton Kelly
+%% updated for LaTeX2e by Frank Mittelbach 96/12/06
+%% Updated for LPPL 1.3c or later by Clea F. Rees (for Frank Mittelbach), 2008/10/06.
+%%
+%% Upgraded with many new features by Dirk Laurie 2010/02/01
+
+
+
+
+
+
+\documentclass[a4paper]{article}
+\usepackage{a4wide,charter,crosswrd}
+\topmargin -20mm
+\textheight 240mm
+\begin{document}
+   \thispagestyle{empty}
+  \begin{crossword}[11]{13}{N}
+   \input grid2
+ \end{crossword}
+\end{document}
+
+\endinput
+%%
+%% End of file `test2.tex'.
diff --git a/Master/texmf-dist/source/latex/crosswrd/crosswrd.dtx b/Master/texmf-dist/source/latex/crosswrd/crosswrd.dtx
index edf15c4ca90..741e54f8e87 100644
--- a/Master/texmf-dist/source/latex/crosswrd/crosswrd.dtx
+++ b/Master/texmf-dist/source/latex/crosswrd/crosswrd.dtx
@@ -3,6 +3,8 @@
 %% Copyright 1989 Brian Hamilton Kelly
 %% updated for LaTeX2e by Frank Mittelbach 96/12/06 
 %% Updated for LPPL 1.3c or later by Clea F. Rees (for Frank Mittelbach), 2008/10/06.
+%% 
+%% Upgraded with many new features by Dirk Laurie 2010/02/01
 %
 % This work may be distributed and/or modified under the
 % conditions of the LaTeX Project Public License, either version 1.3
@@ -22,11 +24,12 @@
           \ProvidesFile{crosswrd.dtx}
 %</dtx>
 %<+package>\NeedsTeXFormat{LaTeX2e}[1995/12/01]
+%<+package>\RequirePackage{ifthen}
 %<+package>\ProvidesPackage{crosswrd}
 %<*dtx,package>
 % \fi
 %         \ProvidesFile{crosswrd.dtx}
-          [1996/12/06 v2.8b Generating crosswords (BHK)]
+          [2010/02/01 v3.0 Generating crosswords (BHK,DPL)]
 %
 % \iffalse
 %</dtx,package>
@@ -40,7 +43,7 @@
 %</driver>
 % \fi
 %
-% \CheckSum{671}
+% \CheckSum{813}
 %
 % \let\ifBigTeX=\iftrue ^^A Change this in the obvious fashion if an
 %                       ^^A enlarged (>75k maxmem) version of TeX is available
@@ -67,12 +70,17 @@
 % \changes{v2.5}{89/09/01}{Final revisions for publication}
 % \changes{v2.6}{89/10/13}{Consistent indentation of {\tt\protect\bslash
 % def}s}
+% \changes{v2.9}{07/12/19}{Variable dimensions and type sizes, does barred
+% grids, does rectangular grids, tests label compatibility, complete
+% rewrite of grid population code}
+% \changes{v3.0}{10/02/01}{LPPL copyright notice included}
 % 
 % \title{Some Macros to Draw Crosswords\thanks{This file is \fileversion,
 % dated \filedate}}
 % \author{B Hamilton Kelly\thanks{Especial thanks to my colleague Niel
 %   Kempson for many helpful suggestions, and to Frank Mittelbach of the
-%   Johannes Gutenberg University of Mainz, who saved me two pages of code!}}
+%   Johannes Gutenberg University of Mainz, who saved me two pages of code!}
+%  \\ Extensions by Dirk Laurie}
 % \maketitle
 % \begin{abstract}
 %   The {\sf crossword} environment is intended to be used to typeset
@@ -104,11 +112,20 @@
 %
 % The macros presented in this document provide a \LaTeX{} method of
 % typesetting these, and also assist the composer to ensure that the
-% ``grid'' all goes together correctly.  The grid generated is the more
+% ``grid'' all goes together correctly.  That is to say, checks
+% are made that crossing lights have the same letter where they cross, 
+% lights starting at the same square have the same clue number,
+% and clue numbers are in sequence from 1 upwards when reading
+% from top left to bottom right.  
+
+% The grid generated can be the more
 % usual form, with black squares separating the ``lights'' which receive the
-% answers to the clues.  Work is in hand to be able to handle the {\sl
-% Mephisto/Azed\/} type of grid, in which only thicker grid lines
-% separate the lights.
+% answers to the clues, or the {\sl Mephisto/Azed\/} type of grid, 
+% in which only thicker grid lines separate the lights, or even 
+% a mixture of these.  The user need not specify which type of grid 
+% is to be used, since they are both described by the same simple rule: 
+% a bar is drawn between every pair of adjacent 
+% light squares that do not belong to the same light.
 %
 %  A sample crossword appears as Figure~\ref{crossword:1}; I've left the
 %  grid blank for those who want some intellectual exercise: those who don't
@@ -118,10 +135,15 @@
 % 
 % \DescribeEnv{crossword}
 %  The whole crossword, including the \verb+\clue+ commands ({\it q.v}.),
-%  is bracketed within the {\sf crossword} environment.  This requires that
-%  the user specifies two parameters:\begin{description}
-%    \item[\meta{gridsize}] This is a number which specifies the columns
-%    (and rows) in the square grid.
+%  is bracketed within the {\sf crossword} environment.  The user may
+%  specify one optional and must specify two required parameters:
+%  \begin{description}
+%    \item[\meta{gridrows}] The number of rows
+%       in the rectangular grid.  If supplied, it must be enclosed in 
+%       square brackets.  It may be omitted if the number of rows
+%       equals the number of columns.
+%       \item[\meta{gridcols}] The number of columns
+%       in the rectangular grid.  
 %    \item[\meta{visible}] This controls whether the answers are to be
 %    ``filled in''; obviously of no use for publication, but useful whilst
 %    composing the crossword.  If the parameter provided is the letter `{\tt
@@ -136,10 +158,10 @@
 % An analogous environment is provided especially for typesetting a smaller
 % version of a grid showing, for example, ``Last Month's Solution''.  In
 % this of course, the answers {\em always\/} appear, and the clues are not
-% printed.  Again it takes two parameters:
+% printed.  Again it takes three parameters,  the first optional:
 % \begin{description}
-%   \item[\meta{gridsize}] As before, this specifies the number of squares
-%   in each axis.
+%   \item[\meta{gridrows, gridcols}] As before, these specify the number 
+%      of squares in the two axes.
 %   \item[\meta{header\_text}] Some text which will be set (in {\bf bold})
 %   above the completed grid.
 % \end{description}
@@ -149,10 +171,10 @@
 % \protect\TeX's}
 % Here is an example of the {\sf crossword*}
 % environment:
-%
+%   {\centering
 %   \begin{crossword*}{15}{Last month's solution}
 %     \MakePercentComment \input{grid0} \MakePercentIgnore
-%   \end{crossword*}
+%   \end{crossword*}}
 % \else
 % Figure~\ref{crossword:2} shows an example of the {\sf crossword*}
 % environment.
@@ -172,9 +194,12 @@
 %   \item[\meta{row\_number}] The $y$-coordinate of the first square of the
 %   light.  The top-most row is numbered 1.
 %   \item[\meta{answer}] The answer to the clue (or that part of it which
-%   appears in the light numbered \meta{clue\_number}).  This must be a
-%   string of upper-case letters {\em only\/}; no spaces, punctuation,
-%   hyphens, etc.
+%   appears in the light numbered \meta{clue\_number}).  Traditionally 
+%   in a completed grid, this is a
+%   string of upper-case letters, but spaces in between are silently ignored,
+%   lower case letters are equally OK, and some other characters such as
+%   question mark and fullstop are useful as placeholders in an
+%   uncompleted grid.  No hyphens or apostrophes, though.
 %   \item[\meta{text}] The text of the clue itself.  If you want to use any
 %   \LaTeX{} macros in this text, such as \verb+\dots+, each such macro must
 %   be preceded by \verb+\noexpand+.  This includes such macros as \verb+\&+,
@@ -183,28 +208,54 @@
 %   this will most usually be used for giving the length of the answer, such
 %   as ``7'' or ``2,6,3-3''.  Also used when the text of the clue is
 %   associated with another light when this parameter may say something like
-%   ``see 14d''.
+%   ``see 14d''.  If this parameter is left \emph{absolutely empty}, 
+%   not merely blank, i.e.\ \verb+{}+, the clue (if any)
+%   will not be printed at all.
 % \end{description}
+% 
+% \subsection{Customizing the layout}
+% Some definitions made when entering the {\sf crossword} environment
+% may be overridden by the user inside the environment.
+% \begin{verbatim}
+%     \unitlength 6mm
+%     \def\Preamble{}
+%     \def\cluewidth{70mm} 
+%     \let\numbersize\tiny 
+%     \let\cluesize\ninept    
+%     \def\barwidth{0.1}
+% \end{verbatim}
+% These refer respectively to size of grid cells, text to be set between
+% the diagram and the clues,
+% width of clue columns, typesize of numbers in grid, type size of 
+% clues, and width of bars in \verb+\unitlength+s.  
+%
+%   If you override 
+%   \verb+\cluesize+ by a \LaTeX\ size command
+%   like \verb+\normalsize+, you will probably feel that there is too much
+%   vertical space between the clues.  The only good solution is to
+%   write your own macro by adapting the definition of \verb+\ninept+
+%   given below.  
 %   
+  
 % \subsection{How to Specify Clue Numbers}\label{clue-numbers}
 % 
 %   Sometimes the solution to one clue is split amongst a number of
-%   ``lights''.  To cover this eventuality, provide a \verb+\clue+ for {\em
+%   lights.  To cover this eventuality, provide a \verb+\clue+ for {\em
 %   each\/} of the lights involved, with the solution to that light {\em
 %   alone\/} given as \meta{answer}.  All except the \verb+\clue+
 %   corresponding to the first light of the solution should have a null
-%   \meta{text}, and the \meta{help} parameter should be something like
+%   \meta{text}, and the \meta{help} parameter might be something like
 %   ``see 7d''.
 % 
 % \changes{v2.4}{89/08/15}{Support for empty help field}
-%   If this final parameter is totally empty, no corresponding clue number
-%   is printed: this facility would be used when the current clue is the
-%   next consecutive light, when it is usual to omit any further reference
-%   to the clue number.
+%   If you wish to omit any further reference
+%   to the clue number (the usual practice when the current clue 
+%   applies to consecutive lights, or in hard cryptics), 
+%   leave the \meta{help} field totally empty.
 %
 %   The \verb+\clue+ for the first light of the solution
 %   should provide the {\em entire\/} clue as its \meta{text}, and the
-%   \meta{help} should say something like ``7,3-3''.  The \meta{clue\_number}
+%   \meta{help} might say something like ``7,3-3''.  The \meta{clue\_number}
 %   field should consist of the number of that light, followed immediately
 %   by the text required to describe the other lights, separated from it by
 %   some non-digit character, for example, a space.
@@ -213,7 +264,7 @@
 % \end{multicols}
 % 
 %  \begin{figure*}[tp]
-%     \begin{crossword}{15}{N}
+%     \begin{crossword}{15}{N} 
 %        \MakePercentComment \input{grid1} \MakePercentIgnore
 %     \end{crossword}
 %     \caption{A Sample Crossword}\label{crossword:1}
@@ -225,7 +276,7 @@
 %   for the {\tt\string\&}}
 %    \begin{verbatim}
 %          \clue{13}{A}{5}{1}{PARLIAMENT}{}{see 9d}
-%          \clue{9 {\noexpand\rm\&} 13a}{D}{1}{10}{ACTOF}%
+%          \clue{9 {\noexpand\rm\&} 13a}{D}{1}{10}{ACT OF}%
 %                {Bill's desired outcome?}{3,2,10}
 %    \end{verbatim}
 %   will produce\begin{description}
@@ -245,6 +296,7 @@
 % \end{figure}
 % \fi
 % 
+
 % \StopEventually{\PrintIndex
 %                 \PrintChanges
 % 		  \ifBigTeX
@@ -258,8 +310,8 @@
 %
 % \begin{macro}{\ninept}
 % \begin{macro}{\@listi}
-% We define a new font size to ensure clues are set at 9pt, no matter what
-% style size option is in effect.  This command also defines suitable
+% We define a new 9pt font size for setting clues.
+% This command also defines suitable
 % parameters for list environments set in this size of type.
 % 
 %    \begin{macrocode}
@@ -283,7 +335,7 @@
 %  \begin{macro}{\numberitfalse}
 %
 %  The {\sf crossword} environment draws a grid (with black and white
-%  squares); each ``light'' into which a clue's answer is to be written has
+%  squares); each light into which a clue's answer is to be written has
 %  to be numbered, and this number will be typeset (using \verb+\tiny+) in
 %  the top-left corner of the first square of the light.
 %
@@ -300,21 +352,27 @@
 % \end{macro}
 % \end{macro}
 %
-% \begin{macro}{\gr@dsize}
+% \begin{macro}{\gridr@ws}
+% \begin{macro}{\gridc@ls}
 % \changes{v2.3}{89/05/17}{Use a raw \protect\TeX\protect\space counter}
+% \begin{macro}{\p@rsize}
 % \begin{macro}{\p@csize}
 % \changes{v2.3}{89/05/17}{Use a raw \protect\TeX\protect\space counter}
-% The counter \verb+\gr@dsize+ is used to hold the width of the grid, as the
-% number of squares  in each direction.
+% \changes{v2.9}{07/12/05}{Define more counters to allow rectangular grids.}
+% The counters \verb+\gridr@ws+, \verb+\gridc@ls+, are used to hold the 
+% width of the grid, as the number of squares in each direction.
 %
-% To prevent too much run-time arithmetic, the counter \verb+\p@csize+ is set
-% to be one count higher than \verb+\gr@dsize+.
+% To prevent too much run-time arithmetic, the counters \verb+\p@rsize+,
+% \verb+\p@csize+ are set to be one count higher than \verb+\gridc@ls+,
+% \verb+\gridr@ws+.
 %    \begin{macrocode}
-\newcount{\gr@dsize}
-\newcount{\p@csize}
+\newcount{\gridr@ws}\newcount{\gridc@ls}
+\newcount{\p@rsize}\newcount{\p@csize}
 %    \end{macrocode}
 % \end{macro}
 % \end{macro}
+% \end{macro}
+% \end{macro}
 %
 % \begin{macro}{\Down}
 % \changes{v2.3}{89/05/17}{Use a raw \protect\TeX\protect\space counter}
@@ -370,26 +428,28 @@
 %  \changes{v2.8a}{96/07/22}{Removed string from \cs{@writefile} arg (FMi)}
 %  \changes{v2.8a}{96/07/22}{Make clue column texts accessible (FMi)}
 %    \begin{macrocode}
-  \@writefile{acr}{\begin{minipage}[t]{70mm}}%
+  \@writefile{acr}{\begin{minipage}[t]{\cluewidth}}%
   \@writefile{acr}{ \centerline{\textbf{\ACROSStext}}}%
   \@writefile{acr}{ \sloppy}%
-  \@writefile{acr}{ \ninept}%
+  \@writefile{acr}{ \cluesize}%
   \@writefile{acr}{ \begin{ClueList}}%
 %    \end{macrocode}
 %  Whilst something similar goes into the {\tt.dwn} file.
 %    \begin{macrocode}
-  \@writefile{dwn}{\begin{minipage}[t]{70mm}}%
+  \@writefile{dwn}{\begin{minipage}[t]{\cluewidth}}%
   \@writefile{dwn}{ \centerline{\textbf{\DOWNtext}}}%
   \@writefile{dwn}{ \sloppy}%
-  \@writefile{dwn}{ \ninept}%
+  \@writefile{dwn}{ \cluesize}%
   \@writefile{dwn}{ \begin{ClueList}}}
 %    \end{macrocode}
-% \end{macro}
+% \end{macro}\end{macro}\end{macro}
 %
 % \begin{macro}{\ACROSStext}
 %  \changes{v2.8a}{96/07/22}{Make clue column texts accessible (FMi)}
 % \begin{macro}{\DOWNtext}
 %  \changes{v2.8a}{96/07/22}{Make clue column texts accessible (FMi)}
+%  You may (e.g.\ if the crossword is not in English) prefer to change
+%  the column text headers.
 %    \begin{macrocode}
 \newcommand\ACROSStext{ACROSS}
 \newcommand\DOWNtext{DOWN}
@@ -425,8 +485,6 @@
 }
 %    \end{macrocode}
 % \end{macro}
-% \end{macro}
-%  \end{macro}
 %
 % \subsection{Tabulating the Clues}
 % The auxiliary files contain the texts of the clues, each given as an
@@ -470,17 +528,20 @@
 %
 % \section{Creating the Grid}
 % The remaining commands are concerned with creating (and, optionally,
-% populating) the crossword grid
+% populating) the crossword grid.
 % 
-% \begin{macro}{\crossword}
+% \begin{macro}{crossword}
+% \begin{macro}{\c@ls}
 % 
-%  The {\sf crossword} environment takes two parameters: {\em viz}.~the
-%  size of the matrix, and the indication of whether the grid is to include
-%  the answers.  (If the latter is omitted, \LaTeX\ will request it
-%  interactively.)
+%  The {\sf crossword} environment takes three parameters: {\em viz}.~the
+%  number of rows (optional, may be omitted if the grid is square) and 
+%  columns of the matrix, and the indication of whether the grid is to include
+%  the answers.  (If the latter is not Y or N, \LaTeX\ will request it
+%  interactively.)  The macro \verb+\c@ls+ is a communication mechanism.  
 %
 %    \begin{macrocode}
-\def\crossword#1#2{%
+\newenvironment{crossword}[3][\c@ls]{%
+    \def\c@ls{#2}    
 %    \end{macrocode}
 %
 % \changes{v2.4}{89/08/15}{Group within \string\crossword\space environment}
@@ -488,20 +549,34 @@
 %  We start off with a \verb+\vtop+ box and a group to hold everything
 %  within the environment, so as to ensure that user-entered text remains
 %  with the crossword.  
+% \changes{v2.9}{07/12/04}{Changed to environment syntax, with
+%    optional argument for rectangular grids}
 %  
 %    \begin{macrocode}
   \endgraf\leavevmode
   \vtop\bgroup
 %    \end{macrocode}
 %
+% \begin{macro}{\Header}
+% \begin{macro}{\cluewidth}
+% \begin{macro}{\numbersize}
+% \begin{macro}{\cluesize}
+% \begin{macro}{\barwidth}
 % The {\sf crossword} environment uses the full-size grid, and has the
 % lights numbered.  Furthermore it doesn't have any heading to output (see
-% the {\sf crossword*} environment).
+% the {\sf crossword*} environment). 
+% Some other macros are given so that the user can customize the layout.
 % 
 %    \begin{macrocode}
     \unitlength 6mm\numberittrue
     \def\Header{}%
+    \def\Preamble{}%
+    \def\cluewidth{70mm}
+    \let\numbersize\tiny
+    \let\cluesize\ninept
+    \def\barwidth{0.1}
 %    \end{macrocode}
+% \end{macro}\end{macro}\end{macro}\end{macro}\end{macro}
 %
 % We now open the auxiliary files into which the clues are written, and
 % determine (interactively if necessary) whether the answers are to be
@@ -509,21 +584,22 @@
 % 
 %    \begin{macrocode}
     \OpenClueFiles
-    \TestAnswers{#2}%
+    \TestAnswers{#3}%
 %    \end{macrocode}
 %
-% Finally, we generate the necessary macros to describe the grid as being
-% entirely filled with black squares; for each square, a macro whose name is
-% of the form \verb+\RiCi+, \verb+\RxiiCviii+, {\em etc}.\ is created.  As
-% the \verb+\clue+ commands are read in, these will be redefined to produce
-% the correct appearance when the macros are later expanded.
-% 
+% Finally, we generate the necessary macros to describe the grid.
+% For each square, there are three macros.  For example,  corresponding 
+% to the square in row 4 from the top, column 2 from the
+% left, the macros are: \smallskip \\ \hspace{1cm}
+% \begin{tabular}{ll}
+%   \verb+\LetterRivCii+ & Letter in the square; \texttt{!} is used for a black square.\\
+%   \verb+\NumberRivCii+ & Number in the square; 0 is used for a numberless square.\\
+%   \verb+\BarRivCii+  & Code defining bars around the square, defined below. 
+% \end{tabular} \smallskip \\
+%
 %    \begin{macrocode}
-    \SetUpGrid{#1}}
+    \SetUpGrid{#1}{\c@ls}}
 %    \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\endcrossword}
 %
 % When all the clues have been processed, we can invoke \verb+\FinishGrid+
 % to draw the grid.  The \verb+\FinishGrid+ and \verb+\PrintClues+ commands
@@ -536,7 +612,7 @@
 % we'll print it just above the grid itself.
 % 
 %    \begin{macrocode}
-\def\endcrossword{\endgraf
+{\endgraf
     \centerline{\Header}%
     \hbox{\FinishGrid}%
 %    \end{macrocode}
@@ -549,24 +625,27 @@
 % Finally, we complete the group and the \verb+\vtop+ box.
 % 
 %    \begin{macrocode}
+    \ifthenelse {\equal{\Preamble}{}} {} 
+       {\centerline{\parbox{\textwidth}{\Preamble}}\medskip}
     \CloseClueFiles
     \hbox{\PrintClues}%
   \egroup
 }
 %    \end{macrocode}
-% \end{macro}
+% \end{macro}\end{macro}
 %
-% \begin{macro}{\crossword*}
-% \changes{v2.6}{89/10/13}{Removed {\tt\protect\bslash iffalse} hack}
-% \begin{macro}{\endcrossword*}
-%  \changes{v2.1}{89/04/27}{No longer opens {\tt.acr} and {\tt.dwn} files}
+% \begin{macro}{crossword*}
+% \changes{v2.1}{89/04/27}{No longer opens {\tt.acr} and {\tt.dwn} files}
 % \changes{v2.6}{89/10/13}{Removed {\tt\protect\bslash iffalse} hack}
+% \changes{v2.9}{07/12/04}{Changed to environment syntax, with
+%    optional argument for rectangular grids}
 %  The {\sf crossword*} environment doesn't need a second parameter to
 %  control printing of answers, because it {\bf always} populates the grid
 %  with the answers.  Instead, its second parameter provides the text to
 %  appear above the printed grid.  Its actions are as for the {\sf
 %  crossword} environment except that\begin{itemize}
-%  \item It prints the descriptive text above the grid.
+%  \item It assumes that there is descriptive text above the grid
+%          and allows room for it.
 %  \item It {\bf always} outputs the answers, without numbers.
 %  \item It draws them in a smaller box.
 %  \item It doesn't output the clues (it doesn't even open any
@@ -574,38 +653,92 @@
 % \end{itemize}
 %
 %    \begin{macrocode}
-\expandafter\def\csname crossword*\endcsname#1#2{%
+\newenvironment{crossword*}[3][\c@ls]{%
+  \def\c@ls{#2}  
   \unitlength 4mm\numberitfalse
+  \def\barwidth{0.1}
   \endgraf\leavevmode
   \vtop\bgroup
-    \def\Header{{\bf\strut #2}}%
+    \def\Header{{\bf\strut #3}}%
     \def\answer{Y}%
     \let\tf@dwn=\relax \let\tf@acr=\relax
-    \SetUpGrid{#1}}
-
-\expandafter\def\csname endcrossword*\endcsname{\endgraf
+    \SetUpGrid{#1}{#2}}
+{\endgraf
     \centerline{\Header}%
     \hbox{\FinishGrid}%
   \egroup
 }
 %    \end{macrocode}
 %  \end{macro}
-%  \end{macro}
-%
-%  \subsection{Macros used when Populating the Grid}
 %
-% \begin{macro}{\laterletter}
-% \changes{v2.1}{89/04/27}{Used to be {\tt\protect\bslash letterput}}
-% The following macro calls this to ``place'' the letters of a solution by
-% defining a macro unique to this square.
-% 
+% \subsection{Macros for each square}
+% \changes{v2.9}{07/12/19}{The part of the code dealing with grid details has
+%   been completely rewritten.  (DPL)}   
+% \begin{macro}{\ind@x}
+% \begin{macro}{\arr@yref}
+% \begin{macro}{\value}
+% \begin{macro}{\assign}
+% \begin{macro}{\addto}
+% Crosswords are inherently two-dimensional, and require matrices
+% of related definitions.  Since \TeX\ does not allow numbers in
+% a name, each square has a unique text index using \texttt{R} and 
+% \texttt{C} followed by roman numerals.  Each macro name consists
+% of a prefix (the same for all squares) followed by the unique
+% text index.  The original version of this
+% package had only one such macro for each square, with an empty prefix,
+% but in this version we have three: \texttt{Letter}, \texttt{Number}
+% and \texttt{Bar}.
+%
+% For readability of the code, the following macros provide bracket 
+% syntax, thereby avoiding the use of \verb+\csname+\ldots\verb+\endcsname+  
+% elsewhere.
+% For example, \verb+\value Bar[2,5]+ gives \verb+\BarRiiCv+.
+% A new definition \texttt{NEW} is assigned by \verb+\assign Bar[2,5]=NEW;+. 
+% If the contents of  \verb+\BarRiiCv+ is a number, you can add 31
+% to it using \verb"\addto Bar[2,5]+=31;".  In both cases, the semicolon
+% is essential.
+%    \begin{macrocode}
+\def\ind@x#1#2{R\romannumeral #1C\romannumeral#2}
+\def\arr@yref#1#2#3{\csname #1\ind@x{#2}{#3}\endcsname}
+\def\value#1[#2,#3]{\arr@yref{#1}{#2}{#3}}
+\def\assign#1[#2,#3]=#4;%
+{\expandafter\edef\csname #1\ind@x{#2}{#3}\endcsname{#4}}
+\newcount\accumulat@r
+\def\addto#1[#2,#3]+=#4;%
+{\accumulat@r=\value #1[#2,#3]  \advance\accumulat@r by #4
+  \assign #1[#2,#3]=\the\accumulat@r;}
+%    \end{macrocode}
+% \end{macro}\end{macro}\end{macro}\end{macro}\end{macro}
+
+% We do bars as follows: in addition to \verb+\RiCii+ etc which define the
+% contents of a square, there is a bar code \verb+\BarRiCii+ etc with 
+% the following meaning:
+% \begin{enumerate}
+%   \item[0:] no bar above or to the left of the square
+%   \item[1:] bar above the square
+%   \item[2:] bar to the left of the square
+%   \item[3:] bars above and to the left of the square
+% \end{enumerate}
+% At the start, all bar codes are set to 3; 
+% the bars between letters are erased as we go along.  
+
+% \subsection{Macros used while processing the clues}
+
+% \begin{macro}{\lettercount}
+% \begin{macro}{\Barcode}
+% As we move along the letters of the answer, we count
+% the number of letters processed in \verb+\lettercount+.
+% The code for the bar to be erased (1 or 2) is put
+% into \verb+Barcode+ before we start on each answer.
 %    \begin{macrocode}
-\def\laterletter#1{\setsquare{\lettersquare{#1}}}
+\newcount\lettercount 
+\newcount\Barcode
 %    \end{macrocode}
-% 
+% \end{macro}
+% \end{macro}
+
 % \begin{macro}{\nextletter}
 % \begin{macro}{\nextlet}
-% 
 %  To determine how much space is required for the light corresponding to
 %  an answer, we need to cycle through each of the characters of the answer
 %  individually; this macro is called with two parameters --- the first
@@ -615,7 +748,7 @@
 %  When it is called, this ``second'' parameter is {\em not\/} enclosed in
 %  braces, so only the first token in it is accessed.  The macro calls
 %  itself recursively to process the remaining characters until the
-%  \verb+\@nil+ has been met.
+%  \verb+\@nil+ has been met.  
 %
 %  \changes{v2.1}{89/04/27}{Can now process {\em first\/} letter of light}
 %    \begin{macrocode}
@@ -633,11 +766,22 @@
 %    \end{macrocode}
 %
 % Otherwise, we have another letter of the \meta{answer} in {\tt\#2}, so we
-% call \verb+\letterput+ to define the macro corresponding to this square,
-% and count one more position occupied in the current direction.
+% save the letter and check that it does not conflict with an earlier letter
+% in the same square. 
 % 
 %    \begin{macrocode}
-  \else\letterput{#2}\advance#1 by \@ne
+  \else \immediate\edef\Before{\value Letter[\Down,\Across]}
+      \assign Letter[\Down,\Across]=#2;
+      \immediate\edef\After{\value Letter[\Down,\Across]}  
+      \if \Before ! \else \if \Before \After
+      \else \errhelp{You mistyped an answer, or miscounted the coordinates.}
+      \errmessage{Letter "\After" conflicts with earlier "\Before"
+         in row \the\Down, column \the\Across}
+      \fi \fi
+% If the letter is not the first letter of its answer, we erase a bar.
+     \ifnum \lettercount>0 \addto Bar[\Down,\Across]+=-\Barcode; \fi
+% Advance another position in the current direction.
+      \@gobble{#2} \advance#1 by \@ne \global\advance \lettercount by \@ne
 %    \end{macrocode}
 %
 % After we've processed this letter, we want to call this routine
@@ -646,13 +790,6 @@
 % \changes{v2.1}{89/04/27}{Change to handle subsequent letters of light}
 %    \begin{macrocode}
     \let\nextlet=\nextletter
-%    \end{macrocode}
-%    
-%  These letters cannot possibly require a starting square number, so we
-%  use a simpler macro for these later letters.
-% 
-%    \begin{macrocode}
-    \let\letterput=\laterletter
   \fi
 %    \end{macrocode}
 %
@@ -666,214 +803,9 @@
 %    \end{macrocode}
 % \end{macro}
 % \end{macro}
-% \end{macro}
-%
-%
-% \begin{macro}{\blacktest}
-% Later we shall want to check that the square into which we are ``putting''
-% a letter is either black (and hence should be changed to contain the
-% character) or has already had the {\em same\/} letter put into it by an
-% intersecting light.
-%
-% We don't want to expand each squares' macros, so these tests have to use
-% the \verb+\ifx+ primitive; therefore, we need a macro which has the same
-% substitution text {\em at the highest level}. 
-% 
-%    \begin{macrocode}
-\def\blacktest{\blacksquare}
-%    \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\ifneed@d}
-% \begin{macro}{\need@dtrue}
-% \begin{macro}{\need@dfalse}
-% As we create the macros corresponding to each occupied square, we have to
-% decide whether it is necessary to actually perform a (re)definition of the
-% macro; the following permits the code to determine whether such definition
-% takes place (within the \verb+\putsquare+ macro).
-% 
-%    \begin{macrocode}
-\newif\ifneed@d
-%    \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\ifNoerr}
-% \begin{macro}{\Noerrtrue}
-% \begin{macro}{\Noerrfalse}
-% If an error is detected during the placement of the occupied squares,
-% there will probably be other errors; to save pouring out yards of error
-% messages, we arrange to suppress all but the first such; the following
-% \verb+\newif+ provides this facility.
 %
-% And of course we start without any errors!
-% 
-%    \begin{macrocode}
-\newif\ifNoerr
-\Noerrtrue
-%    \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\Number}
-% \begin{macro}{\Plain}
-% To determine whether a square has already been occupied, and if so, by
-% what, we require a couple of new tokens which can be tested for as the
-% result of a macro expansion
-%    \begin{macrocode}
-\newtoks\Number \newtoks\Plain
-%    \end{macrocode}
-%
-% \begin{macro}{\blank}
-% \begin{macro}{\numbered}
-% The next two definitions can be temporarily \verb+\let+ to be the
-% replacements for \verb+\lettersquare+ and \verb+\numbersquare+
-% respectively, for use in conjunction with the aforementioned test.
-% 
-%    \begin{macrocode}
-\def\blank#1{\Plain}
-\def\numbered#1#2{\Number}
-%    \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\letterinsquare}
-% \begin{macro}{\letterinnumbersquare}
-% When we first read the clues, we create macros which are unique to each
-% square; later we shall redefine the macros to which the squares' macros
-% expand to actually perform the setting, but during the first phase we
-% require expansions which correspond to the parameters alone.  The
-% following definitions are therefore used during the ``filling'' phase.
-% 
-%    \begin{macrocode}
-\def\letterinsquare#1{#1}
 
-\def\letterinnumbersquare#1#2{#2}
-%    \end{macrocode}
-%
-% \begin{macro}{\setsquare}
-% As we scan the answers for each clue, this macro is called with a
-% parameter which specifies a call of either the \verb+\lettersquare+ or
-% \verb+\numbersquare+ macros (with appropriate parameters).
-%
-% It starts by assuming that no redefinition of the square's macro will be
-% required.
-% 
-%    \begin{macrocode}
-\def\setsquare#1{%
-  \need@dfalse
-%    \end{macrocode}
-%
-% This macro is also called during the initialization of the grid, when we
-% populate it with black squares; therefore, we definitely want to perform a
-% definition of the square's macro at this stage.
-% 
-%    \begin{macrocode}
-  \ifx#1\blacksquare
-    \need@dtrue
-%    \end{macrocode}
-%
-% Otherwise, let's have a look and see what is already in the square's
-% macro.  This test will succeed only if the square contains its initial
-% definition (as \verb+\blacksquare+).
-%    \begin{macrocode}
-  \else
-    \expandafter\ifx\csname\ther@w\thec@l\endcsname\blacktest
-%    \end{macrocode}
-%
-% in which case we {\em will\/} want to redefine the macro for this square
-% 
-%    \begin{macrocode}
-      \need@dtrue
-%    \end{macrocode}
-%
-% If the square has already been redefined, it means we've already ``put'' a
-% letter (or number+letter) into its definition, so we will have to check
-% that this definition doesn't conflict with the new one (which is in
-% {\tt\#1}).  We have to expand the macros to perform this test, but don't
-% want that expansion to return anything except the letter which is being
-% (and has been) placed in the square, so we make a temporary replacement
-% for the two macros which might form our {\tt\#1}.
-%    \begin{macrocode}
-    \else
-      \let\lettersquare=\letterinsquare
-      \let\numbersquare=\letterinnumbersquare
-%    \end{macrocode}
-%
-% Now we {\em expand\/} the original definition and the new one; these
-% should be the same!
-% \changes{v2.6}{89/10/13}{Minor revision of layout}
-% 
-%    \begin{macrocode}
-      \expandafter\if\csname\ther@w\thec@l\endcsname#1
-      \else
-%    \end{macrocode}
-%
-% If they aren't, it means the compiler of the crossword has made a mistake
-% and has solutions which don't correctly intersect: tell him so (well, the
-% first time anyway).  We even provide the user with some help!
-% 
-%    \begin{macrocode}
-        \ifNoerr
-          \errhelp{Two intersecting lights tried to
-                   put different letters^^Jin the same square!
-                   You've probably confused their coordinates.^^J
-                   Carry on, and examine the printout.}
-          \errmessage{Illegal redefinition of square \ther@w\thec@l.
-                   Was: \expandafter\meaning\csname\ther@w
-                                                \thec@l\endcsname.
-                   Now: \noexpand #1}
-          \Noerrfalse
-        \fi
-      \fi
-%    \end{macrocode}
-%
-% So far, we don't seem to need to change anything, but if the new {\tt\#1}
-% which has been passed to \verb+\putsquare+ specifies that it be numbered,
-% we must subsume any existing definition which {\em doesn't\/} have a
-% number.
-%
-% Again, we make temporary reassignments for the two potential macros, which
-% is where we make use of the two new tokens that we invented.
-% 
-%    \begin{macrocode}
-      \let\lettersquare=\blank
-      \let\numbersquare=\numbered
-%    \end{macrocode}
-%
-% If the following test succeeds, we know that the new parameter specifies a
-% number as well as a letter.  This code could be expanded to check whether
-% the original definition also specified a number, and if so ensure that
-% they are the same, but would anybody really be silly enough to give
-% different numbers for clues starting from the same square?!
-%    \begin{macrocode}
-      \expandafter\ifx#1\Number
-        \need@dtrue
-      \fi
-    \fi
-  \fi
-%    \end{macrocode}
-%
-%  Now we know whether we must (re)define the macro which is unique to this
-%  square.  If we must, we expand our {\tt\#1}, so as to get the actual
-%  number and letter passed in through that parameter, but keep the name of
-%  the placement macro itself\footnote{This will be the first token of the
-%  parameter itself.} unexpanded.
-% 
-%    \begin{macrocode}
-  \ifneed@d
-     \expandafter\edef\csname\ther@w\thec@l\endcsname{\noexpand #1}
-  \fi
-}
-%    \end{macrocode}
-% \end{macro}  ^^A \setsquare
-% \end{macro}  ^^A \letterinnumbersquare
-% \end{macro}  ^^A \letterinsquare
-%
+
 % \subsection{The {\tt\protect\bslash clue} Command}
 %
 % \begin{macro}{\clue}
@@ -885,8 +817,31 @@
 % 
 %    \begin{macrocode}
 \def\clue#1#2#3#4#5#6#7{%
+%    \end{macrocode}
+% The $x$ and $y$ coordinate counters are set from the \meta{column} and
+% \meta{row} parameters.
+% 
+%    \begin{macrocode}
+  \Across=#3 \Down=#4 
+%    \end{macrocode}
+% The clue may be spread over more than one number, but the square
+% takes only the first of these.
+%    \begin{macrocode}
   \findnumber{#1}
 %    \end{macrocode}
+% Save the clue number, checking that it was not previously defined
+% to be something else.
+%    \begin{macrocode}
+  \immediate\edef\Before{\value Number[\Down,\Across]}
+  \assign Number[\Down,\Across]=\cluenumber;
+  \immediate\edef\After{\value Number[\Down,\Across]}
+  \ifnum \Before>0 \ifnum \After=\Before
+  \else \errhelp
+     {You probably made a mistake when typing in one of the clues.}
+     \errmessage{Number {\After} conflicts with earlier {\Before}
+      in row \the\Down, column \the\Across} 
+     \fi \fi
+%    \end{macrocode}
 %
 %  We now examine the second (\meta{Across/Down}) parameter of the
 %  \verb+\clue+ command to determine whether this is an Across or Down
@@ -902,13 +857,15 @@
 %  \meta{Across/Down} parameter is the letter `{\tt A}'.  In this case, the
 %  counter to be incremented is \verb+\Across+.
 %  \changes{v2.8a}{96/07/22}{Removed string from \cs{@writefile} arg (FMi)}
+%  \changes{v2.9}{07/12/19}{Change empty test to use \cs{ifthenelse}.
+%    Testing by \cs{if} is a bug. (DPL)}
 %    \begin{macrocode}
   \ifx#2A
-    \if\@empty#7\relax\else
+    \global\Barcode=2
+    \ifthenelse{\equal{\@empty}{#7}}{}{
       \ifx\tf@acr\relax\else
         \@writefile{acr}{  \item[#1] #6 (#7)}%
-      \fi
-    \fi
+      \fi}    
     \let\Direction=\Across
   \else
 %    \end{macrocode}
@@ -916,11 +873,11 @@
 %  file, and the \verb+\Down+ counter is incremented.
 %    \begin{macrocode}
     \ifx#2D
-      \if\@empty#7\relax\else
-        \ifx\tf@dwn\relax\else
-          \@writefile{dwn}{  \item[#1] #6 (#7)}%
-        \fi
-      \fi
+      \global\Barcode=1
+    \ifthenelse{\equal{\@empty}{#7}}{}{
+      \ifx\tf@dwn\relax\else
+        \@writefile{dwn}{  \item[#1] #6 (#7)}%
+      \fi}   
       \let\Direction=\Down
     \else
 %    \end{macrocode}
@@ -937,39 +894,15 @@
   \fi
 %    \end{macrocode}
 %
-% The $x$ and $y$ coordinate counters are set from the \meta{column} and
-% \meta{row} parameters.
-% 
-%    \begin{macrocode}
-  \Across=#3 \Down=#4
-%    \end{macrocode}
-%    
-% \begin{macro}{\letterput}
-% \changes{v2.1}{89/04/27}{Replacement for {\tt\protect\bslash firstletter}
-%                          method}
-%
-%  The \verb+\letterput+ macro is defined anew at the start of each clue to
-%  create the correct definition for the {\em first\/} square of each
-%  light.  The \verb+\setsquare+ macro redefines this macro internally for
-%  the remaining squares.
-% 
-%    \begin{macrocode}
-  \edef\letterput##1{\noexpand\setsquare
-                         {\noexpand\numbersquare
-                                  {\noexpand\cluenumber}{##1}}}%
-%    \end{macrocode}
-%  \end{macro}
-%
 % Now we can call \verb+\nextletter+ which will cycle through all the
 % letters of the \meta{answer} until meeting the token \verb+\@nil+.
-% As each letter is processed, it creates a definition for the current
-% square, initially using the above definition, and then \verb+\laterletter+
-% for subsequent letters of the \meta{answer}.
-%
+% It will save the current letter and recursively call  itself until no
+% letters are left.
 % Finally, we ensure that the newlines after \verb+\clue+ commands don't
 % lead to unwanted spaces being typeset.
 % \changes{v2.6}{89/10/13}{Minor revision of layout}
 %    \begin{macrocode}
+  \global\lettercount=0
   \nextletter{\Direction}#5\@nil
   \ignorespaces
 }
@@ -1026,7 +959,8 @@
 % \changes{v2.6}{89/10/13}{Minor revision of layout}
 % If the user did not provide a valid \meta{clue\_number} (i.e.\ something
 % starting with a digit), then \verb+clueNumber+ will have zero assigned to
-% it --- seems the user ought to be told about this!
+% it.  This will cause a diagnostic message at the stage when it is checked
+% that the clue numbers run consecutively in reading order from 1 upwards.
 % 
 % This completes \verb+\findnumber+.
 % 
@@ -1055,13 +989,9 @@
 % \changes{v2.2}{89/05/17}{Used {\tt\protect\bslash blackenrow} for inner loop}
 % \changes{v2.8a}{96/07/22}{Fixed command to save val of \cs{iterate} 
 %                           not \cs{body} (FMi)}
-% For each column in a row we create a black square; effectively
-% \verb+\setsquare+ will execute the definition
-%    \begin{macrocode}
-% \def\csname\ther@w\thec@l\endcsname{\blacksquare}
-%    \end{macrocode}
-% so that for row~3 column~6 of a $15\times15$ grid, for example, we would
-% end up by defining \verb+\def\RiiiCvi{\blacksquare}+.
+% For each column in a row we create a black square by setting the
+% letter in the square to \texttt{!}.  We also initialize the \texttt{Number}
+% and \texttt{Bar} macros.
 %
 % Before starting the inner loop, we need to save the definition of
 % \verb+\body+ which was created for the outer loop.  We cannot do this by
@@ -1070,12 +1000,14 @@
 % 
 % Actually with \LaTeXe{} we have to save \verb=\iterate= as the internals 
 % of \verb=\loop= have been streamlined. With the old code only the first
-% row was updated---this is the rpcie for using an unpublished implementation
+% row was updated---this is the price for using an unpublished implementation
 % feature.
 %    \begin{macrocode}
 \def\blackenrow{\let\savediterate\iterate
   \loop\relax\ifnum\Across>\z@
-    \setsquare{\blacksquare}%
+    \assign Bar[\Down,\Across]=3;
+    \assign Letter[\Down,\Across]=!;
+    \assign Number[\Down,\Across]=0;
 %    \end{macrocode}
 %
 % We then shift ourselves back to the next column to the left and iterate.
@@ -1092,22 +1024,25 @@
 %    \end{macrocode}
 %
 % \begin{macro}{\SetUpGrid}
+% \changes{v2.9}{07/12/05}{Rectangular grids}
 %
 % This macro creates an empty grid of the appropriate size.
 % 
 %    \begin{macrocode}
-\def\SetUpGrid#1{%
+\def\SetUpGrid#1#2{%
 %    \end{macrocode}
 %
-%  We firstly make a note of the \meta{gridsize} parameter in the
-%  \verb+\gr@dsize+ counter, from which the width and height of the grid
+%  We firstly make a note of the \meta{gridcols} parameter in the
+%  \verb+\gr@dcols+ counter, from which the width and height of the grid
 %  may be computed.  We also set the \verb+\p@csize+ counter to be one
-%  greater than \verb+\gr@dsize+ to save our recomputing this quantity many
-%  times over.
+%  greater than \verb+\gridc@ls+ to save our recomputing this quantity many
+%  times over.  Ditto mutatis mutandis for \meta{gridrows}.
 %
 %    \begin{macrocode}
-  \gr@dsize=#1
-  \p@csize=#1 \advance\p@csize by \@ne
+  \gridr@ws=#1\gridc@ls=#2
+  \p@rsize=#1 \advance\p@rsize by \@ne
+  \p@csize=#2 \advance\p@csize by \@ne
+  \typeout{Grid has #1 rows and #2 columns.}
 %    \end{macrocode}
 %    
 % Right, this is where we start to generate the grid itself.  We start at
@@ -1116,7 +1051,7 @@
 % number attainable.
 % 
 %    \begin{macrocode}
-  \Down=\gr@dsize
+  \Down=\gridr@ws
 %    \end{macrocode}
 %
 % We now start a loop, so the following code will be repeated for each row
@@ -1126,7 +1061,7 @@
 % 
 %    \begin{macrocode}
   \loop
-    \Across=\gr@dsize
+    \Across=\gridc@ls
 %    \end{macrocode}
 %
 %  Provided we haven't decremented down to the 0th row, we start off the
@@ -1155,22 +1090,6 @@
 % \end{macro}  ^^A \SetUpGrid
 % \end{macro}  ^^A \blackenrow
 %
-% \begin{macro}{\thec@l}
-% \begin{macro}{\ther@w}
-% \verb+\thec@l+ and \verb+\ther@w+ macros generate a string of letters,
-% starting with `{\tt C}' (for column) and `{\tt R}' (for row) respectively.
-% The remainder of the string consists of the lower-case Roman numeral
-% equivalent to the current value of the appropriate counter.  Such
-% all-letter strings are used to create the names for macros which can be
-% unique for each square of the grid.
-% 
-%    \begin{macrocode}
-\def\thec@l{C\romannumeral\Across}
-\def\ther@w{R\romannumeral\Down}
-%    \end{macrocode}
-%    \end{macro}
-%    \end{macro}
-%
 % \begin{macro}{\TestAnswers}
 % This macro interacts with the user, if necessary, to get a yes or no
 % indication of whether the answers shall be written into the grid.  No
@@ -1195,7 +1114,7 @@
 %    \end{macrocode}
 %    We can then extract just the first character
 %    \begin{macrocode}
-  \edef\answer{\expandafter \f@rst \answer .}%
+  \edef\answer{\expandafter \f@rst \answer n.}%
 %    \end{macrocode}
 %    The we determine whether it's the letter `{\tt y}' or `{\tt n}'\dots
 %    \begin{macrocode}
@@ -1212,7 +1131,7 @@
 %    \begin{macrocode}
   \edef\next{\def\noexpand\answer{\answer}}%
   \uppercase\expandafter{\next}%
-  \edef\answer{\expandafter \f@rst \answer .}%
+  \edef\answer{\expandafter \f@rst \answer n.}%
 }
 %    \end{macrocode}
 % \end{macro}
@@ -1221,25 +1140,27 @@
 %
 % \subsection{Setting the Grid}
 %
-% \begin{macro}{\letter}
-% This is the expansion which is used (for \verb+\letterinsquare+,
-% and within the expansion of \verb+\numberedsquare+) when the grid is
-% actually being {\em typeset\/} from the stored squares' macros.
+% \begin{macro}{\putletter}
 % 
 %  \changes{v2.8a}{96/07/22}{use \cs{sffamily} (FMi)}
+% These macros put letters, numbers and bars at the current
+% \verb+[\Down,\Across]+ position.  Note that \verb+\putletter+
+% would be redefined to \verb+\relax+ if no actual letters are required.
 %    \begin{macrocode}
-\def\letter#1{{\put(\Across,-\Down){\makebox(1,1){\sffamily #1}}}}
+\def\putletter{{\put(\Across,-\Down){\makebox(1,1)
+   {\sffamily \value Letter[\Down,\Across]}}}}
 %    \end{macrocode}
-% 
-% \begin{macro}{\numberedsquare}
-% This macro is used (for \verb+\numbersquare+) when the lights are being
-% drawn with light numbering enabled.  It puts the number (and the letter of
-% the answer too, depending upon the definition of \verb+\letter+ which is
-% current) at the current coordinate position specified by
-% \verb+(\Across,\Down)+.
+% \begin{macro}{\putnumber}
+% The \verb+\putnumber+ macro checks whether the clue number is 0 (which
+% means an unnumbered square) and whether the clue numbers are in
+% sequence.  To this end, it makes use of global \verb+\oldnumber+
+% and \texttt{seqtest}.
 %    \begin{macrocode}
-\def\numberedsquare#1#2{%
-  \put(\Across,-\Down){%
+\newcount\oldnumber \oldnumber=0  
+\newif\ifseqtest \seqtestfalse
+\def\putnumber{\immediate\def\Number{\value Number[\Down,\Across]}
+   \ifnumberit \ifnum\Number>0
+   \put(\Across,-\Down){%
 %    \end{macrocode}
 %
 % To insert the clue number, we generate it within a sub-picture, of size
@@ -1250,37 +1171,57 @@
 %    \end{macrocode}
 %
 % We stick the number in the top-left corner of an (invisible) box which
-% fills the central 81\% of the area.
-% 
-%    \begin{macrocode}
-      \put(0.05,0.05){\makebox(0.9,0.9)[tl]{\tiny #1}}
-    \end{picture}%
-  }
-%    \end{macrocode}
-%
-% We also set the letter in the square (depending upon the definition of
-% \verb+\letter+ which applies.
+% fills the central 81\% of the area.  In the process, we check whether
+% the clues are properly numbered in reading order.
 % 
 %    \begin{macrocode}
-  \letter{#2}}
+       \put(0.05,0.05){\makebox(0.9,0.9)[tl]{\numbersize\Number}}
+    \end{picture}}
+  \ifnum \oldnumber>0 \advance\oldnumber by\m@ne
+    \ifnum \oldnumber=\Number {\seqtesttrue} \else 
+      \ifseqtest 
+      \errhelp{Clues should be numbered consecutively from top left 
+               to bottom right.}
+      \errmessage{Found clue number \Number, but expected \the\oldnumber} 
 %    \end{macrocode}
-%
-% \begin{macro}{\unnumberedsquare}
-% Despite its name, this macro is invoked (through \verb+\numbersquare+) for
-% those squares which would ordinarily carry a light's number, were it not
-% for the fact that the numbers have been suppressed by the {\sf crossword*}
-% environment.
-%
-% It just discards the \meta{clue\_number} given in the first parameter and
-% sets the current letter by invoking \verb+\letter+, which uses the second
-% parameter\dots
+% If a clue number was mistyped, it will generate two out-of-sequence
+% errors.  We suppress the second of these.
 % 
 %    \begin{macrocode}
-\def\unnumberedsquare#1{\letter}
+      \seqtestfalse
+      \else\seqtesttrue\fi
+    \fi 
+  \fi 
+  \global \oldnumber=\Number
+\fi \fi
+}
 %    \end{macrocode}
-% \end{macro}  ^^A \unnumberedsquare
-% \end{macro}  ^^A \numberedsquare
-% \end{macro}  ^^A \letter
+% \begin{macro}{\putbars}
+% If there are two adjacent light squares not belonging to the same light,
+% we draw a bar between them.  We use two counters for that: one for the
+% previous square, so we can test for its blackness; one for the
+% changing value of the barcode for the current square. 
+%    \begin{macrocode}
+\newcount \pr@vious
+\newcount \c@de
+\def\putbars{ \linethickness{\barwidth\unitlength}
+  \c@de=\value Bar[\Down,\Across]
+  \ifnum \c@de>1 \advance\c@de by -2 
+     \ifnum \Across>1
+       \pr@vious=\Across \advance \pr@vious by -1
+       \immediate\def\pr@vlet{\value Letter[\Down,\pr@vious]}
+       \if \pr@vlet ! \else \put(\Across,-\Down){\line(0,1){1}}
+   \fi \fi \fi
+  \ifnum \c@de>0  
+     \ifnum \Down>1
+       \pr@vious=\Down \advance \pr@vious by -1
+       \immediate\def\pr@vlet{\value Letter[\pr@vious,\Across]}
+       \if \pr@vlet ! \else \put(\Across,-\pr@vious){\line(1,0){1}}
+   \fi \fi \fi
+}    
+%    \end{macrocode}
+%
+% \end{macro}\end{macro}\end{macro}  
 %
 % \begin{macro}{\FinishGrid}
 % Now we can process all the stored macros which define the appearance of
@@ -1291,62 +1232,28 @@
 % different effects during the filling of the grid.
 % \changes{v2.2}{89/05/17}{Removed extraneous opening space after brace}
 % \changes{v2.6}{89/10/13}{Minor revision of layout}
+% \changes{v2.9}{07/12/05}{Rectangular grid, top right extra labels}
 %    \begin{macrocode}
 \def\FinishGrid{%
 %    \end{macrocode}
 %
 % If the customer doesn't want the letters put into the grid, then we
-% need only throw away any parameter to \verb+letter+.
-% 
-%    \begin{macrocode}
-  \if\answer Y \else \let \letter=\@gobble \fi
-%    \end{macrocode}
-%
-% As stated in the introduction, when typesetting the grid in a smaller
-% version, there is insufficient space to include the numbers for the
-% lights; by testing \verb+\ifnumberit+ we can determine whether a macro
-% which expands to \verb+\numbersquare+ shall result in a number being
-% printed or not.
-% 
-%    \begin{macrocode}
-  \ifnumberit
-    \let\numbersquare=\numberedsquare
-  \else
-    \let\numbersquare=\unnumberedsquare
-  \fi
-%    \end{macrocode}
-%
-% Anything that's been stored as a \verb+\lettersquare+ is ``set'' using the
-% \verb+\letter+ macro (which we might have just \verb+\let+ equal to
-% \verb+\@gobble+).
-% 
-%    \begin{macrocode}
-  \let\lettersquare=\letter
-%    \end{macrocode}
-%
-% \begin{macro}{\blacksquare}
-% Any black squares that are still left in the grid are set by means of this
-% command:
+% need only let \verb+\putletter+ do nothing.  Since \verb+\FinishGrid+
+% is invoked inside the environment, the original definition will be
+% restored on exit.
 % 
 %    \begin{macrocode}
-  \def\blacksquare{%
-%    \end{macrocode}
-%  
-%  The black square itself is merely a rule of the appropriate dimensions.
-%  
-%    \begin{macrocode}
-    \put(\Across,-\Down){\rule{\unitlength}{\unitlength}}}
+  \if\answer Y \else \let\putletter\relax \fi
 %    \end{macrocode}
-% \end{macro}
-%
 %
 % Now we come to the actual body of \verb+\FinishGrid+.
 % 
 % \changes{v2.6}{89/10/13}{Minor revision of layout}
+% \changes{v2.9}{07/12/05}{Rectangular grid}
 % We start off at the bottom-most row of the grid\dots
 % 
 %    \begin{macrocode}
-  \Down=\gr@dsize
+  \Down=\gridr@ws
 %    \end{macrocode}
 %
 % The whole grid is created in a centered \verb+\hbox+ in a {\sf picture}
@@ -1356,7 +1263,7 @@
 % 
 %    \begin{macrocode}
   \centerline{%
-    \begin{picture}(\p@csize,\p@csize)(1,-\p@csize)
+    \begin{picture}(\p@csize,\p@rsize)(1,-\p@rsize)
 %    \end{macrocode}
 %
 % We now cycle through each of the rows.  The first thing we output is a
@@ -1366,14 +1273,14 @@
 % 
 %    \begin{macrocode}
     \loop\ifnum\Down>\z@
-      \put(1,-\Down){\line(1,0){\the\gr@dsize}}
+      \put(1,-\Down){\line(1,0){\the\gridc@ls}}
 %    \end{macrocode}
 %
 % Now we are about to cycle across all the columns of the current row;
 % again, it's convenient for us to work backwards to the left\dots
 % 
 %    \begin{macrocode}
-      \Across=\gr@dsize
+      \Across=\gridc@ls
 %    \end{macrocode}
 %
 % To do this we need an inner loop; this has to be inside a group so as to
@@ -1383,13 +1290,16 @@
       {\loop \ifnum\Across>\z@
 %    \end{macrocode}
 %
-% To set the appropriate object in this square, we merely invoke the macro
-% which has been associated with the square.  Thus we'll end up with a black
-% square, or a numbered or plain square, the latter two of which may also
-% contain a letter.  
-% 
+% A black square is represented by \texttt{!} instead of a letter.
+% We need an \verb+\immediate+ definition to force the expansion 
+% so we can test using \verb+\if+. This test cannot be made inside
+% \verb+\putletter+ because that macro may have been redefined
+% when the lights are empty.
 %    \begin{macrocode}
-         \csname\ther@w\thec@l\endcsname
+        \immediate\def\lett@r{\value Letter[\Down,\Across]}
+        \if \lett@r ! \put(\Across,-\Down){\rule{\unitlength}{\unitlength}}
+        \else \putletter \putnumber \putbars
+        \fi
 %    \end{macrocode}
 %
 %  Now we advance to the next column and iterate.  That's the end of the
@@ -1402,18 +1312,23 @@
 %    \end{macrocode}
 %
 % Now we can decrement down to the next row and iterate through the
-% rows.
+% rows.  In the process, we encounter all the clue numbers in opposite
+% order, therefore the last clue number found should be 1.
 % 
 %    \begin{macrocode}
       \advance\Down by \m@ne
     \repeat
+    \ifthenelse{\equal{\the\oldnumber}1}{}
+     {\ifnumberit\errhelp{Clues should be numbered consecutively 
+        from top left to bottom right.}
+      \errmessage{First clue number is \the\oldnumber, not 1} \fi}
 %    \end{macrocode}
 %
 % We've so far drawn a horizontal line {\em under\/} each of the rows; the
 % next \verb+\put+ draws a final line {\em above\/} the top-most row.
 % 
 %    \begin{macrocode}
-    \put(1,0){\line(1,0){\the\gr@dsize}}
+    \put(1,0){\line(1,0){\the\gridc@ls}}
 %    \end{macrocode}
 %
 % Similarly, a short loop can draw vertical rules at the left-hand edge of
@@ -1424,7 +1339,7 @@
 %    \begin{macrocode}
     \Across=\p@csize
     \loop\ifnum\Across>\z@
-      \put(\Across,0){\line(0,-1){\the\gr@dsize}}
+      \put(\Across,0){\line(0,-1){\the\gridr@ws}}
       \advance\Across by \m@ne
     \repeat
 %    \end{macrocode}
@@ -1440,12 +1355,20 @@
 % \end{macro}
 %
 %
+%
+% \section{A hard crossword with blocks and bars}
+%     \begin{crossword}[11]{13}{N} 
+%        \MakePercentComment \input{grid2} \MakePercentIgnore
+%     \end{crossword}
+
+
+% \section{Sample input files}
 % Finally, here's the input which produced the crossword in
-%  figure~\ref{crossword:1} 
+%  Figure~\ref{crossword:1} 
 %
 %    \begin{verbatim}
 %      \begin{crossword}{15}{N}
-%         \input{grid-1}
+%         \input{grid1}
 %      \end{crossword}
 %    \end{verbatim}
 %
@@ -1574,7 +1497,6 @@
 %</exa0>
 %    \end{macrocode}
 %
-%
 % 
 %    \begin{macrocode}
 %<*exa1>
@@ -1586,7 +1508,7 @@
 \begin{document}
     \section*{A Sample Crossword}
     \textit{(Chamber's Twentieth Century dictionary)}
-    \begin{crossword}{15}{?}
+    \begin{crossword}{15}{N}
       \input{grid1}
     \end{crossword}
     \begin{crossword*}{15}{Solution to grid 0}
@@ -1595,8 +1517,80 @@
 \end{document}
 %</exa1>
 %    \end{macrocode}
-%
+
 %
 %  \Finale
-%  
+%  \endinput
+
+
+%<*exa2>
+\documentclass[a4paper]{article}
+\usepackage{a4wide,charter,crosswrd}
+\topmargin -20mm
+\textheight 240mm
+\begin{document}
+   \thispagestyle{empty}
+  \begin{crossword}[11]{13}{N}
+   \input grid2 
+ \end{crossword}
+\end{document}
+%</exa2>
+%<*grid2>
+    \unitlength 7mm    
+    \let\numbersize\scriptsize
+    \centerline{\large{\textbf{T-shirt design} by Dirk Laurie}}
+    \def\Preamble{5 27, and that goes for 17 11 25 and 24A 10 too,
+I'm sure, so the unclued lights should be entered in red.  
+The other lights are all
+in the rather ancient edition of Chambers consulted by the composer.} 
+\clue{1}{A}{1}{1}{........}{Murderer's lip in an evil act}{8}
+\clue{6}{A}{9}{1}{.....}{Places where vehicles without 
+   resistance get bogged down?}{5}
+\clue{10}{A}{2}{2}{..........}{}{}
+\clue{12}{A}{1}{3}{....}{Perhaps 27 die here}{4}
+\clue{14}{A}{5}{3}{.....}{Obstinate at first and after a smack}{5}
+\clue{15}{A}{10}{3}{....}{Seduced girl, as rumoured}{4}
+\clue{16}{A}{1}{5}{........}{Paid an unspecified amount in Johannesburg}{8}
+\clue{17 \noexpand\& 11D \noexpand\& 25D}{A}{9}{5}{.....}{}{See preamble}
+\clue{18}{A}{1}{6}{......}{Butt gives information in a peeve}{6,hyphenated}
+\clue{20}{A}{8}{6}{......}{Big folk appearing in spots last month}{6}
+\clue{24 \noexpand\& 10}{A}{1}{7}{.....}{}{See preamble}
+\clue{26}{A}{6}{7}{........}{Wince after European has knocked back medicine, 
+leaving out some}{8}
+\clue{30}{A}{1}{9}{....}{Recidivist is back, getting old in here}{4}
+\clue{31}{A}{5}{9}{.....}{Unwilling to receive a small copper pot}{5}
+\clue{32}{A}{10}{9}{....}{Primal wilderness beside a person from the East
+ ``is Paradise ---''}{4}
+\clue{33}{A}{3}{10}{..........}{Denizen of Africa to suffer in the heat 
+when dose insects get in}{10}
+\clue{34}{A}{1}{11}{.....}{Turn around at home and peek outside, like 18?}{5}
+\clue{35}{A}{6}{11}{........}{Such as these two from the back going 
+   ahead in copious lovemaking}{8}
+\clue{1}{D}{1}{1}{......}{A disc full of French horn music}{6}
+\clue{2}{D}{2}{1}{....}{Drams served up in Highland drizzle}{4}
+\clue{3}{D}{4}{1}{......}{A gadfly with well-separated feet etc}{6,two words}
+\clue{4}{D}{5}{1}{......}{Not many shooting up, in fact only one}{6}
+\clue{5 \noexpand\& 27}{D}{7}{1}{.....}{}{See preamble,three words}
+\clue{6}{D}{9}{1}{.....}{Tree that will, having had root extracted 
+at first, turn into mineral!}{5}
+\clue{7}{D}{10}{1}{....}{Give me a response that I can hear: 
+  it's no longer a crisis}{4}
+\clue{8}{D}{12}{1}{......}{What unreformed head wears is right}{6}
+\clue{9}{D}{13}{1}{.....}{Dirk's parrot, found in polar regions}{5}
+\clue{11}{D}{11}{2}{........}{}{}
+\clue{13}{D}{3}{3}{........}{Saying "Be with you shortly", lassie goes inside 
+house}{8}
+\clue{19}{D}{2}{6}{......}{Invest ten rand judiciously}{6}
+\clue{21}{D}{9}{6}{......}{Coin Dirk lost on the way up; Henry gets involved}{6}
+\clue{22}{D}{10}{6}{......}{Peek!}{6}
+\clue{23}{D}{13}{6}{......}{Neutral sounds and trite sayings arise all around Switzerland}{6}
+\clue{24}{D}{1}{7}{.....}{Servants genteel at heart?  One of them
+is the butler at Blandings Castle!}
+{5}
+\clue{25}{D}{5}{7}{.....}{}{}
+\clue{27}{D}{7}{7}{.....}{}{}
+\clue{28}{D}{4}{8}{....}{Serving up only half a beer is a mistake}{4}
+\clue{29}{D}{12}{8}{....}{Footplay before strong no-trump not allowed}{4}   
+%</grid2>
+%
 
diff --git a/Master/texmf-dist/source/latex/crosswrd/crosswrd.ins b/Master/texmf-dist/source/latex/crosswrd/crosswrd.ins
index 01993bdf41a..49acbbf1bdb 100644
--- a/Master/texmf-dist/source/latex/crosswrd/crosswrd.ins
+++ b/Master/texmf-dist/source/latex/crosswrd/crosswrd.ins
@@ -1,44 +1,24 @@
-%% crosswrd.ins
-%% Copyright 1989 Brian Hamilton Kelly
-%% updated for LaTeX2e by Frank Mittelbach 96/12/06 
-%
-% This work may be distributed and/or modified under the
-% conditions of the LaTeX Project Public License, either version 1.3
-% of this license or (at your option) any later version.
-% The latest version of this license is in
-%   http://www.latex-project.org/lppl.txt
-% and version 1.3 or later is part of all distributions of LaTeX
-% version 2005/12/01 or later.
-%
-% This work has the LPPL maintenance status `unmaintained'.
-% 
-% This work consists of the files crosswrd.dtx, crosswrd.ins and README 
-% and the derived files test0.tex, test1.tex, grid0.tex, grid1.tex and crosswrd.sty.
-%
+
 \def\batchfile{crosswrd.ins}
 \input docstrip.tex
 
 \preamble
-
-Copyright 1989 Brian Hamilton Kelly
-updated for LaTeX2e by Frank Mittelbach 96/12/06 
+Copyright C 1989 Brian Hamilton Kelly
 
 crossword macros for LaTeX
+updated for LaTeX2e by Frank Mittelbach 96/12/06
+substantially extended by Dirk Laurie 08/01/18
 
 for documentation run latex crosswrd.dtx
 
-This work may be distributed and/or modified under the
-conditions of the LaTeX Project Public License, either version 1.3
-of this license or (at your option) any later version.
-The latest version of this license is in
-  http://www.latex-project.org/lppl.txt
-and version 1.3 or later is part of all distributions of LaTeX
-version 2005/12/01 or later.
+distribution consist of
 
-This work has the LPPL maintenance status `unmaintained'.
+  crosswrd.dtx       source
+  crosswrd.ins       installation script
+  00readme
 
-This work consists of the files crosswrd.dtx, crosswrd.ins and README 
-and the derived files test0.tex, test1.tex, grid0.tex, grid1.tex and crosswrd.sty.
+don't distribute this file without distributing the above
+files as well
 
 \endpreamble
 
@@ -48,6 +28,8 @@ and the derived files test0.tex, test1.tex, grid0.tex, grid1.tex and crosswrd.st
   \file{crosswrd.sty}{\from{crosswrd.dtx}{package}}
   \file{test0.tex}{\from{crosswrd.dtx}{exa0}}
   \file{test1.tex}{\from{crosswrd.dtx}{exa1}}
+  \file{test2.tex}{\from{crosswrd.dtx}{exa2}}
   \file{grid0.tex}{\from{crosswrd.dtx}{grid0}}
   \file{grid1.tex}{\from{crosswrd.dtx}{grid1}}
+  \file{grid2.tex}{\from{crosswrd.dtx}{grid2}}
 }
diff --git a/Master/texmf-dist/tex/latex/crosswrd/crosswrd.sty b/Master/texmf-dist/tex/latex/crosswrd/crosswrd.sty
index 2ce9fec99f9..69c18210116 100644
--- a/Master/texmf-dist/tex/latex/crosswrd/crosswrd.sty
+++ b/Master/texmf-dist/tex/latex/crosswrd/crosswrd.sty
@@ -5,34 +5,36 @@
 %% The original source files were:
 %%
 %% crosswrd.dtx  (with options: `package')
-%% 
-%% Copyright 1989 Brian Hamilton Kelly
-%% updated for LaTeX2e by Frank Mittelbach 96/12/06
+%% Copyright C 1989 Brian Hamilton Kelly
 %% 
 %% crossword macros for LaTeX
+%% updated for LaTeX2e by Frank Mittelbach 96/12/06
+%% substantially extended by Dirk Laurie 08/01/18
 %% 
 %% for documentation run latex crosswrd.dtx
 %% 
-%% This work may be distributed and/or modified under the
-%% conditions of the LaTeX Project Public License, either version 1.3
-%% of this license or (at your option) any later version.
-%% The latest version of this license is in
-%%   http://www.latex-project.org/lppl.txt
-%% and version 1.3 or later is part of all distributions of LaTeX
-%% version 2005/12/01 or later.
+%% distribution consist of
 %% 
-%% This work has the LPPL maintenance status `unmaintained'.
+%%   crosswrd.dtx       source
+%%   crosswrd.ins       installation script
+%%   00readme
 %% 
-%% This work consists of the files crosswrd.dtx, crosswrd.ins and README
-%% and the derived files test0.tex, test1.tex, grid0.tex, grid1.tex and crosswrd.sty.
+%% don't distribute this file without distributing the above
+%% files as well
 %% 
 %% crosswrd.dtx
 %% Copyright 1989 Brian Hamilton Kelly
 %% updated for LaTeX2e by Frank Mittelbach 96/12/06
 %% Updated for LPPL 1.3c or later by Clea F. Rees (for Frank Mittelbach), 2008/10/06.
+%%
+%% Upgraded with many new features by Dirk Laurie 2010/02/01
 \NeedsTeXFormat{LaTeX2e}[1995/12/01]
+\RequirePackage{ifthen}
 \ProvidesPackage{crosswrd}
-          [1996/12/06 v2.8b Generating crosswords (BHK)]
+          [2010/02/01 v3.0 Generating crosswords (BHK,DPL)]
+
+
+
 \def\ninept{\@setsize\ninept{11pt}\ixpt\@ixpt
   \abovedisplayskip 8.5pt plus 3pt minus 4pt
   \belowdisplayskip \abovedisplayskip
@@ -43,8 +45,8 @@
     \topsep 4pt plus 2pt minus 2pt
 }}
 \newif\ifnumberit
-\newcount{\gr@dsize}
-\newcount{\p@csize}
+\newcount{\gridr@ws}\newcount{\gridc@ls}
+\newcount{\p@rsize}\newcount{\p@csize}
 \newcount{\Down}
 \newcount{\Across}
 \newwrite\tf@acr
@@ -52,15 +54,15 @@
 \def\OpenClueFiles{%
   \immediate\openout \tf@acr \jobname.acr\relax
   \immediate\openout \tf@dwn \jobname.dwn\relax
-  \@writefile{acr}{\begin{minipage}[t]{70mm}}%
+  \@writefile{acr}{\begin{minipage}[t]{\cluewidth}}%
   \@writefile{acr}{ \centerline{\textbf{\ACROSStext}}}%
   \@writefile{acr}{ \sloppy}%
-  \@writefile{acr}{ \ninept}%
+  \@writefile{acr}{ \cluesize}%
   \@writefile{acr}{ \begin{ClueList}}%
-  \@writefile{dwn}{\begin{minipage}[t]{70mm}}%
+  \@writefile{dwn}{\begin{minipage}[t]{\cluewidth}}%
   \@writefile{dwn}{ \centerline{\textbf{\DOWNtext}}}%
   \@writefile{dwn}{ \sloppy}%
-  \@writefile{dwn}{ \ninept}%
+  \@writefile{dwn}{ \cluesize}%
   \@writefile{dwn}{ \begin{ClueList}}}
 \newcommand\ACROSStext{ACROSS}
 \newcommand\DOWNtext{DOWN}
@@ -87,104 +89,101 @@
     \end{tabular}
   }\endgraf
 }
-\def\crossword#1#2{%
+\newenvironment{crossword}[3][\c@ls]{%
+    \def\c@ls{#2}
   \endgraf\leavevmode
   \vtop\bgroup
     \unitlength 6mm\numberittrue
     \def\Header{}%
+    \def\Preamble{}%
+    \def\cluewidth{70mm}
+    \let\numbersize\tiny
+    \let\cluesize\ninept
+    \def\barwidth{0.1}
     \OpenClueFiles
-    \TestAnswers{#2}%
-    \SetUpGrid{#1}}
-\def\endcrossword{\endgraf
+    \TestAnswers{#3}%
+    \SetUpGrid{#1}{\c@ls}}
+{\endgraf
     \centerline{\Header}%
     \hbox{\FinishGrid}%
+    \ifthenelse {\equal{\Preamble}{}} {}
+       {\centerline{\parbox{\textwidth}{\Preamble}}\medskip}
     \CloseClueFiles
     \hbox{\PrintClues}%
   \egroup
 }
-\expandafter\def\csname crossword*\endcsname#1#2{%
+\newenvironment{crossword*}[3][\c@ls]{%
+  \def\c@ls{#2}
   \unitlength 4mm\numberitfalse
+  \def\barwidth{0.1}
   \endgraf\leavevmode
   \vtop\bgroup
-    \def\Header{{\bf\strut #2}}%
+    \def\Header{{\bf\strut #3}}%
     \def\answer{Y}%
     \let\tf@dwn=\relax \let\tf@acr=\relax
-    \SetUpGrid{#1}}
-
-\expandafter\def\csname endcrossword*\endcsname{\endgraf
+    \SetUpGrid{#1}{#2}}
+{\endgraf
     \centerline{\Header}%
     \hbox{\FinishGrid}%
   \egroup
 }
-\def\laterletter#1{\setsquare{\lettersquare{#1}}}
+\def\ind@x#1#2{R\romannumeral #1C\romannumeral#2}
+\def\arr@yref#1#2#3{\csname #1\ind@x{#2}{#3}\endcsname}
+\def\value#1[#2,#3]{\arr@yref{#1}{#2}{#3}}
+\def\assign#1[#2,#3]=#4;%
+{\expandafter\edef\csname #1\ind@x{#2}{#3}\endcsname{#4}}
+\newcount\accumulat@r
+\def\addto#1[#2,#3]+=#4;%
+{\accumulat@r=\value #1[#2,#3]  \advance\accumulat@r by #4
+  \assign #1[#2,#3]=\the\accumulat@r;}
+
+
+
+\newcount\lettercount
+\newcount\Barcode
+
 \def\nextletter#1#2{%
   \ifx#2\@nil \let\nextlet=\@gobble
-  \else\letterput{#2}\advance#1 by \@ne
+  \else \immediate\edef\Before{\value Letter[\Down,\Across]}
+      \assign Letter[\Down,\Across]=#2;
+      \immediate\edef\After{\value Letter[\Down,\Across]}
+      \if \Before ! \else \if \Before \After
+      \else \errhelp{You mistyped an answer, or miscounted the coordinates.}
+      \errmessage{Letter "\After" conflicts with earlier "\Before"
+         in row \the\Down, column \the\Across}
+      \fi \fi
+     \ifnum \lettercount>0 \addto Bar[\Down,\Across]+=-\Barcode; \fi
+      \@gobble{#2} \advance#1 by \@ne \global\advance \lettercount by \@ne
     \let\nextlet=\nextletter
-    \let\letterput=\laterletter
   \fi
   \nextlet{#1}}
-\def\blacktest{\blacksquare}
-\newif\ifneed@d
-\newif\ifNoerr
-\Noerrtrue
-\newtoks\Number \newtoks\Plain
-\def\blank#1{\Plain}
-\def\numbered#1#2{\Number}
-\def\letterinsquare#1{#1}
 
-\def\letterinnumbersquare#1#2{#2}
-\def\setsquare#1{%
-  \need@dfalse
-  \ifx#1\blacksquare
-    \need@dtrue
-  \else
-    \expandafter\ifx\csname\ther@w\thec@l\endcsname\blacktest
-      \need@dtrue
-    \else
-      \let\lettersquare=\letterinsquare
-      \let\numbersquare=\letterinnumbersquare
-      \expandafter\if\csname\ther@w\thec@l\endcsname#1
-      \else
-        \ifNoerr
-          \errhelp{Two intersecting lights tried to
-                   put different letters^^Jin the same square!
-                   You've probably confused their coordinates.^^J
-                   Carry on, and examine the printout.}
-          \errmessage{Illegal redefinition of square \ther@w\thec@l.
-                   Was: \expandafter\meaning\csname\ther@w
-                                                \thec@l\endcsname.
-                   Now: \noexpand #1}
-          \Noerrfalse
-        \fi
-      \fi
-      \let\lettersquare=\blank
-      \let\numbersquare=\numbered
-      \expandafter\ifx#1\Number
-        \need@dtrue
-      \fi
-    \fi
-  \fi
-  \ifneed@d
-     \expandafter\edef\csname\ther@w\thec@l\endcsname{\noexpand #1}
-  \fi
-}
 \def\clue#1#2#3#4#5#6#7{%
+  \Across=#3 \Down=#4
   \findnumber{#1}
+  \immediate\edef\Before{\value Number[\Down,\Across]}
+  \assign Number[\Down,\Across]=\cluenumber;
+  \immediate\edef\After{\value Number[\Down,\Across]}
+  \ifnum \Before>0 \ifnum \After=\Before
+  \else \errhelp
+     {You probably made a mistake when typing in one of the clues.}
+     \errmessage{Number {\After} conflicts with earlier {\Before}
+      in row \the\Down, column \the\Across}
+     \fi \fi
   \ifx#2A
-    \if\@empty#7\relax\else
+    \global\Barcode=2
+    \ifthenelse{\equal{\@empty}{#7}}{}{
       \ifx\tf@acr\relax\else
         \@writefile{acr}{  \item[#1] #6 (#7)}%
-      \fi
-    \fi
+      \fi}
     \let\Direction=\Across
   \else
     \ifx#2D
-      \if\@empty#7\relax\else
-        \ifx\tf@dwn\relax\else
-          \@writefile{dwn}{  \item[#1] #6 (#7)}%
-        \fi
-      \fi
+      \global\Barcode=1
+    \ifthenelse{\equal{\@empty}{#7}}{}{
+      \ifx\tf@dwn\relax\else
+        \@writefile{dwn}{  \item[#1] #6 (#7)}%
+      \fi}
       \let\Direction=\Down
     \else
       \errhelp{The second parameter of the \string\clue\space
@@ -193,10 +192,7 @@
                   for \string\clue.}
     \fi
   \fi
-  \Across=#3 \Down=#4
-  \edef\letterput##1{\noexpand\setsquare
-                         {\noexpand\numbersquare
-                                  {\noexpand\cluenumber}{##1}}}%
+  \global\lettercount=0
   \nextletter{\Direction}#5\@nil
   \ignorespaces
 }
@@ -214,77 +210,112 @@
 \def\cluenumber{\the\clueNumber}
 \def\blackenrow{\let\savediterate\iterate
   \loop\relax\ifnum\Across>\z@
-    \setsquare{\blacksquare}%
+    \assign Bar[\Down,\Across]=3;
+    \assign Letter[\Down,\Across]=!;
+    \assign Number[\Down,\Across]=0;
     \advance\Across by \m@ne
   \repeat
   \let\iterate\savediterate
 }
-\def\SetUpGrid#1{%
-  \gr@dsize=#1
-  \p@csize=#1 \advance\p@csize by \@ne
-  \Down=\gr@dsize
+\def\SetUpGrid#1#2{%
+  \gridr@ws=#1\gridc@ls=#2
+  \p@rsize=#1 \advance\p@rsize by \@ne
+  \p@csize=#2 \advance\p@csize by \@ne
+  \typeout{Grid has #1 rows and #2 columns.}
+  \Down=\gridr@ws
   \loop
-    \Across=\gr@dsize
+    \Across=\gridc@ls
     \ifnum\Down>\z@
         \blackenrow
         \advance\Down by \m@ne
   \repeat
 }
-\def\thec@l{C\romannumeral\Across}
-\def\ther@w{R\romannumeral\Down}
 \def\f@rst#1#2.{#1}
 \def\TestAnswers#1{\edef\next{\def\noexpand\answer{#1}}%
   \lowercase\expandafter{\next}%
-  \edef\answer{\expandafter \f@rst \answer .}%
+  \edef\answer{\expandafter \f@rst \answer n.}%
   \if\answer y \else \if\answer n \else
     \typein[\answer]{Make answers visible? [Y/N]: }\fi
   \fi
   \edef\next{\def\noexpand\answer{\answer}}%
   \uppercase\expandafter{\next}%
-  \edef\answer{\expandafter \f@rst \answer .}%
+  \edef\answer{\expandafter \f@rst \answer n.}%
 }
-\def\letter#1{{\put(\Across,-\Down){\makebox(1,1){\sffamily #1}}}}
-\def\numberedsquare#1#2{%
-  \put(\Across,-\Down){%
+\def\putletter{{\put(\Across,-\Down){\makebox(1,1)
+   {\sffamily \value Letter[\Down,\Across]}}}}
+\newcount\oldnumber \oldnumber=0
+\newif\ifseqtest \seqtestfalse
+\def\putnumber{\immediate\def\Number{\value Number[\Down,\Across]}
+   \ifnumberit \ifnum\Number>0
+   \put(\Across,-\Down){%
     \begin{picture}(1,1)(0,0)
-      \put(0.05,0.05){\makebox(0.9,0.9)[tl]{\tiny #1}}
-    \end{picture}%
-  }
-  \letter{#2}}
-\def\unnumberedsquare#1{\letter}
-\def\FinishGrid{%
-  \if\answer Y \else \let \letter=\@gobble \fi
-  \ifnumberit
-    \let\numbersquare=\numberedsquare
-  \else
-    \let\numbersquare=\unnumberedsquare
+       \put(0.05,0.05){\makebox(0.9,0.9)[tl]{\numbersize\Number}}
+    \end{picture}}
+  \ifnum \oldnumber>0 \advance\oldnumber by\m@ne
+    \ifnum \oldnumber=\Number {\seqtesttrue} \else
+      \ifseqtest
+      \errhelp{Clues should be numbered consecutively from top left
+               to bottom right.}
+      \errmessage{Found clue number \Number, but expected \the\oldnumber}
+      \seqtestfalse
+      \else\seqtesttrue\fi
+    \fi
   \fi
-  \let\lettersquare=\letter
-  \def\blacksquare{%
-    \put(\Across,-\Down){\rule{\unitlength}{\unitlength}}}
-  \Down=\gr@dsize
+  \global \oldnumber=\Number
+\fi \fi
+}
+\newcount \pr@vious
+\newcount \c@de
+\def\putbars{ \linethickness{\barwidth\unitlength}
+  \c@de=\value Bar[\Down,\Across]
+  \ifnum \c@de>1 \advance\c@de by -2
+     \ifnum \Across>1
+       \pr@vious=\Across \advance \pr@vious by -1
+       \immediate\def\pr@vlet{\value Letter[\Down,\pr@vious]}
+       \if \pr@vlet ! \else \put(\Across,-\Down){\line(0,1){1}}
+   \fi \fi \fi
+  \ifnum \c@de>0
+     \ifnum \Down>1
+       \pr@vious=\Down \advance \pr@vious by -1
+       \immediate\def\pr@vlet{\value Letter[\pr@vious,\Across]}
+       \if \pr@vlet ! \else \put(\Across,-\pr@vious){\line(1,0){1}}
+   \fi \fi \fi
+}
+\def\FinishGrid{%
+  \if\answer Y \else \let\putletter\relax \fi
+  \Down=\gridr@ws
   \centerline{%
-    \begin{picture}(\p@csize,\p@csize)(1,-\p@csize)
+    \begin{picture}(\p@csize,\p@rsize)(1,-\p@rsize)
     \loop\ifnum\Down>\z@
-      \put(1,-\Down){\line(1,0){\the\gr@dsize}}
-      \Across=\gr@dsize
+      \put(1,-\Down){\line(1,0){\the\gridc@ls}}
+      \Across=\gridc@ls
       {\loop \ifnum\Across>\z@
-         \csname\ther@w\thec@l\endcsname
+        \immediate\def\lett@r{\value Letter[\Down,\Across]}
+        \if \lett@r ! \put(\Across,-\Down){\rule{\unitlength}{\unitlength}}
+        \else \putletter \putnumber \putbars
+        \fi
          \advance\Across by \m@ne
        \repeat
       }%
       \advance\Down by \m@ne
     \repeat
-    \put(1,0){\line(1,0){\the\gr@dsize}}
+    \ifthenelse{\equal{\the\oldnumber}1}{}
+     {\ifnumberit\errhelp{Clues should be numbered consecutively
+        from top left to bottom right.}
+      \errmessage{First clue number is \the\oldnumber, not 1} \fi}
+    \put(1,0){\line(1,0){\the\gridc@ls}}
     \Across=\p@csize
     \loop\ifnum\Across>\z@
-      \put(\Across,0){\line(0,-1){\the\gr@dsize}}
+      \put(\Across,0){\line(0,-1){\the\gridr@ws}}
       \advance\Across by \m@ne
     \repeat
     \end{picture}%
   }%
 }
 
+
+
+
 \endinput
 %%
 %% End of file `crosswrd.sty'.
author	Karl Berry <karl@freefriends.org>	2010-02-01 23:43:36 +0000
committer	Karl Berry <karl@freefriends.org>	2010-02-01 23:43:36 +0000
commit	b5175a492edaae1f38dd15addcbfeccf76033194 (patch)
tree	77937c49ab2cbb89c57955c2073d224c98fb9a4b /Master
parent	3556ffda02def0f822bd81adaa1a0f331e850ed6 (diff)