summaryrefslogtreecommitdiff
path: root/Master
diff options
context:
space:
mode:
authorKarl Berry <karl@freefriends.org>2010-02-01 23:43:36 +0000
committerKarl Berry <karl@freefriends.org>2010-02-01 23:43:36 +0000
commitb5175a492edaae1f38dd15addcbfeccf76033194 (patch)
tree77937c49ab2cbb89c57955c2073d224c98fb9a4b /Master
parent3556ffda02def0f822bd81adaa1a0f331e850ed6 (diff)
crosswrd update (1feb10)
git-svn-id: svn://tug.org/texlive/trunk@16896 c570f23f-e606-0410-a88d-b1316a301751
Diffstat (limited to 'Master')
-rw-r--r--Master/texmf-dist/doc/latex/crosswrd/README39
-rw-r--r--Master/texmf-dist/doc/latex/crosswrd/crosswrd.pdfbin236506 -> 239279 bytes
-rw-r--r--Master/texmf-dist/doc/latex/crosswrd/grid0.tex30
-rw-r--r--Master/texmf-dist/doc/latex/crosswrd/grid1.tex30
-rw-r--r--Master/texmf-dist/doc/latex/crosswrd/grid2.tex95
-rw-r--r--Master/texmf-dist/doc/latex/crosswrd/test0.tex30
-rw-r--r--Master/texmf-dist/doc/latex/crosswrd/test1.tex32
-rw-r--r--Master/texmf-dist/doc/latex/crosswrd/test2.tex50
-rw-r--r--Master/texmf-dist/source/latex/crosswrd/crosswrd.dtx944
-rw-r--r--Master/texmf-dist/source/latex/crosswrd/crosswrd.ins42
-rw-r--r--Master/texmf-dist/tex/latex/crosswrd/crosswrd.sty275
11 files changed, 879 insertions, 688 deletions
diff --git a/Master/texmf-dist/doc/latex/crosswrd/README b/Master/texmf-dist/doc/latex/crosswrd/README
index 8df5c4b6a6c..e395d67cca0 100644
--- a/Master/texmf-dist/doc/latex/crosswrd/README
+++ b/Master/texmf-dist/doc/latex/crosswrd/README
@@ -1,5 +1,6 @@
Copyright 1989 Brian Hamilton Kelly
-updated for LaTeX2e by Frank Mittelbach 96/12/06
+updated for LaTeX2e by Frank Mittelbach 96/12/06
+upgraded with many new features by Dirk Laurie 10/02/01
This work may be distributed and/or modified under the
conditions of the LaTeX Project Public License, either version 1.3
@@ -12,13 +13,36 @@ version 2005/12/01 or later.
This work has the LPPL maintenance status `unmaintained'.
This work consists of the files crosswrd.dtx, crosswrd.ins and README
-and the derived files test0.tex, test1.tex, grid0.tex, grid1.tex and crosswrd.sty.
+and the derived files test0.tex, test1.tex, test2.tex, grid0.tex,
+grid1.tex, grid2.tex and crosswrd.sty.
Introduction
============
This distribution contains the crosswrd package by Brian Hamilton
-Kelly updated to run with LaTeX2e the standard LaTeX distribution.
+Kelly updated to run with LaTeX2e the standard LaTeX distribution,
+and extended in several ways, one of which Brian himself envisaged
+but did not live to complete. Brian died on 15th September 2005.
+
+Frank Mittelbach's comments and instructions (slightly updated)
+follow after the hline.
+
+I added support for several new features, including barred grids,
+mixed barred/blocked grids, rectangular grids, automatic clue number
+checking and more, and composed a hard cryptic in the Azed/Mephisto
+style demonstrating those.
+
+For the next few months I am willing to support the package.
+
+Enjoy!
+
+Dirk Laurie 10/02/01
+
+PS If you can solve the hard thematic puzzle, let me know. I'd like
+to add the names of the first few solvers to this README.
+ dee pee ell at ess you en dot ay see dot zed ay
+
+-------------------------------------------------------------------
I did change a bit of the coding to allow typesetting an unlimited
number of crosswords and also added two new commands
@@ -32,21 +56,20 @@ Installation
============
to unpack run
-
latex crosswrd.ins
to install place crosswrd.sty into dir searched by LaTeX
-to produce documentation (after unpacking) run
-
+to produce documentation (after unpacking) run
latex crosswrd.dtx
+until there is no "Rerun LaTeX" message
to produce examples (after unpacking) run
-
latex test0
-
or
latex test1
+or
+ latex test2
enjoy
diff --git a/Master/texmf-dist/doc/latex/crosswrd/crosswrd.pdf b/Master/texmf-dist/doc/latex/crosswrd/crosswrd.pdf
index cd81d4fa41c..30ddb0383f7 100644
--- a/Master/texmf-dist/doc/latex/crosswrd/crosswrd.pdf
+++ b/Master/texmf-dist/doc/latex/crosswrd/crosswrd.pdf
Binary files differ
diff --git a/Master/texmf-dist/doc/latex/crosswrd/grid0.tex b/Master/texmf-dist/doc/latex/crosswrd/grid0.tex
index 690d41bf659..5e05af8170a 100644
--- a/Master/texmf-dist/doc/latex/crosswrd/grid0.tex
+++ b/Master/texmf-dist/doc/latex/crosswrd/grid0.tex
@@ -5,31 +5,33 @@
%% The original source files were:
%%
%% crosswrd.dtx (with options: `grid0')
-%%
-%% Copyright 1989 Brian Hamilton Kelly
-%% updated for LaTeX2e by Frank Mittelbach 96/12/06
+%% Copyright C 1989 Brian Hamilton Kelly
%%
%% crossword macros for LaTeX
+%% updated for LaTeX2e by Frank Mittelbach 96/12/06
+%% substantially extended by Dirk Laurie 08/01/18
%%
%% for documentation run latex crosswrd.dtx
%%
-%% This work may be distributed and/or modified under the
-%% conditions of the LaTeX Project Public License, either version 1.3
-%% of this license or (at your option) any later version.
-%% The latest version of this license is in
-%% http://www.latex-project.org/lppl.txt
-%% and version 1.3 or later is part of all distributions of LaTeX
-%% version 2005/12/01 or later.
+%% distribution consist of
%%
-%% This work has the LPPL maintenance status `unmaintained'.
+%% crosswrd.dtx source
+%% crosswrd.ins installation script
+%% 00readme
%%
-%% This work consists of the files crosswrd.dtx, crosswrd.ins and README
-%% and the derived files test0.tex, test1.tex, grid0.tex, grid1.tex and crosswrd.sty.
+%% don't distribute this file without distributing the above
+%% files as well
%%
%% crosswrd.dtx
%% Copyright 1989 Brian Hamilton Kelly
%% updated for LaTeX2e by Frank Mittelbach 96/12/06
%% Updated for LPPL 1.3c or later by Clea F. Rees (for Frank Mittelbach), 2008/10/06.
+%%
+%% Upgraded with many new features by Dirk Laurie 2010/02/01
+
+
+
+
\clue{1}{A}{3}{1}{PERAMBULATOR}{Stroller carrying the baby}{12}
\clue{8}{A}{1}{3}{IMPASSE}{Eastern note returned about predicament resulting
in deadlock}{7}
@@ -74,6 +76,8 @@
\clue{22}{D}{7}{11}{MAHDI}{I would shortly overact, sent up, and the
downfall of Gordon}{5}
+
+
\endinput
%%
%% End of file `grid0.tex'.
diff --git a/Master/texmf-dist/doc/latex/crosswrd/grid1.tex b/Master/texmf-dist/doc/latex/crosswrd/grid1.tex
index 82712add843..06dac322fb2 100644
--- a/Master/texmf-dist/doc/latex/crosswrd/grid1.tex
+++ b/Master/texmf-dist/doc/latex/crosswrd/grid1.tex
@@ -5,31 +5,33 @@
%% The original source files were:
%%
%% crosswrd.dtx (with options: `grid1')
-%%
-%% Copyright 1989 Brian Hamilton Kelly
-%% updated for LaTeX2e by Frank Mittelbach 96/12/06
+%% Copyright C 1989 Brian Hamilton Kelly
%%
%% crossword macros for LaTeX
+%% updated for LaTeX2e by Frank Mittelbach 96/12/06
+%% substantially extended by Dirk Laurie 08/01/18
%%
%% for documentation run latex crosswrd.dtx
%%
-%% This work may be distributed and/or modified under the
-%% conditions of the LaTeX Project Public License, either version 1.3
-%% of this license or (at your option) any later version.
-%% The latest version of this license is in
-%% http://www.latex-project.org/lppl.txt
-%% and version 1.3 or later is part of all distributions of LaTeX
-%% version 2005/12/01 or later.
+%% distribution consist of
%%
-%% This work has the LPPL maintenance status `unmaintained'.
+%% crosswrd.dtx source
+%% crosswrd.ins installation script
+%% 00readme
%%
-%% This work consists of the files crosswrd.dtx, crosswrd.ins and README
-%% and the derived files test0.tex, test1.tex, grid0.tex, grid1.tex and crosswrd.sty.
+%% don't distribute this file without distributing the above
+%% files as well
%%
%% crosswrd.dtx
%% Copyright 1989 Brian Hamilton Kelly
%% updated for LaTeX2e by Frank Mittelbach 96/12/06
%% Updated for LPPL 1.3c or later by Clea F. Rees (for Frank Mittelbach), 2008/10/06.
+%%
+%% Upgraded with many new features by Dirk Laurie 2010/02/01
+
+
+
+
\clue{8}{A}{1}{2}{SWAM}{Points a thousand tested for witchcraft.}{4}
\clue{9}{A}{6}{2}{OHO}{Gourmet's triumphant cry on finding middle-cut
Pacific salmon!}{3}
@@ -81,6 +83,8 @@
that's in bequest.}{6}
\clue{24}{D}{2}{12}{MALL}{}{See {\bf 7}}
+
+
\endinput
%%
%% End of file `grid1.tex'.
diff --git a/Master/texmf-dist/doc/latex/crosswrd/grid2.tex b/Master/texmf-dist/doc/latex/crosswrd/grid2.tex
new file mode 100644
index 00000000000..09545b5d22b
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/crosswrd/grid2.tex
@@ -0,0 +1,95 @@
+%%
+%% This is file `grid2.tex',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% crosswrd.dtx (with options: `grid2')
+%% Copyright C 1989 Brian Hamilton Kelly
+%%
+%% crossword macros for LaTeX
+%% updated for LaTeX2e by Frank Mittelbach 96/12/06
+%% substantially extended by Dirk Laurie 08/01/18
+%%
+%% for documentation run latex crosswrd.dtx
+%%
+%% distribution consist of
+%%
+%% crosswrd.dtx source
+%% crosswrd.ins installation script
+%% 00readme
+%%
+%% don't distribute this file without distributing the above
+%% files as well
+%%
+%% crosswrd.dtx
+%% Copyright 1989 Brian Hamilton Kelly
+%% updated for LaTeX2e by Frank Mittelbach 96/12/06
+%% Updated for LPPL 1.3c or later by Clea F. Rees (for Frank Mittelbach), 2008/10/06.
+%%
+%% Upgraded with many new features by Dirk Laurie 2010/02/01
+
+
+
+
+
+
+ \unitlength 7mm
+ \let\numbersize\scriptsize
+ \centerline{\large{\textbf{T-shirt design} by Dirk Laurie}}
+ \def\Preamble{5 27, and that goes for 17 11 25 and 24A 10 too,
+I'm sure, so the unclued lights should be entered in red.
+The other lights are all
+in the rather ancient edition of Chambers consulted by the composer.}
+\clue{1}{A}{1}{1}{........}{Murderer's lip in an evil act}{8}
+\clue{6}{A}{9}{1}{.....}{Places where vehicles without
+ resistance get bogged down?}{5}
+\clue{10}{A}{2}{2}{..........}{}{}
+\clue{12}{A}{1}{3}{....}{Perhaps 27 die here}{4}
+\clue{14}{A}{5}{3}{.....}{Obstinate at first and after a smack}{5}
+\clue{15}{A}{10}{3}{....}{Seduced girl, as rumoured}{4}
+\clue{16}{A}{1}{5}{........}{Paid an unspecified amount in Johannesburg}{8}
+\clue{17 \noexpand\& 11D \noexpand\& 25D}{A}{9}{5}{.....}{}{See preamble}
+\clue{18}{A}{1}{6}{......}{Butt gives information in a peeve}{6,hyphenated}
+\clue{20}{A}{8}{6}{......}{Big folk appearing in spots last month}{6}
+\clue{24 \noexpand\& 10}{A}{1}{7}{.....}{}{See preamble}
+\clue{26}{A}{6}{7}{........}{Wince after European has knocked back medicine,
+leaving out some}{8}
+\clue{30}{A}{1}{9}{....}{Recidivist is back, getting old in here}{4}
+\clue{31}{A}{5}{9}{.....}{Unwilling to receive a small copper pot}{5}
+\clue{32}{A}{10}{9}{....}{Primal wilderness beside a person from the East
+ ``is Paradise ---''}{4}
+\clue{33}{A}{3}{10}{..........}{Denizen of Africa to suffer in the heat
+when dose insects get in}{10}
+\clue{34}{A}{1}{11}{.....}{Turn around at home and peek outside, like 18?}{5}
+\clue{35}{A}{6}{11}{........}{Such as these two from the back going
+ ahead in copious lovemaking}{8}
+\clue{1}{D}{1}{1}{......}{A disc full of French horn music}{6}
+\clue{2}{D}{2}{1}{....}{Drams served up in Highland drizzle}{4}
+\clue{3}{D}{4}{1}{......}{A gadfly with well-separated feet etc}{6,two words}
+\clue{4}{D}{5}{1}{......}{Not many shooting up, in fact only one}{6}
+\clue{5 \noexpand\& 27}{D}{7}{1}{.....}{}{See preamble,three words}
+\clue{6}{D}{9}{1}{.....}{Tree that will, having had root extracted
+at first, turn into mineral!}{5}
+\clue{7}{D}{10}{1}{....}{Give me a response that I can hear:
+ it's no longer a crisis}{4}
+\clue{8}{D}{12}{1}{......}{What unreformed head wears is right}{6}
+\clue{9}{D}{13}{1}{.....}{Dirk's parrot, found in polar regions}{5}
+\clue{11}{D}{11}{2}{........}{}{}
+\clue{13}{D}{3}{3}{........}{Saying "Be with you shortly", lassie goes inside
+house}{8}
+\clue{19}{D}{2}{6}{......}{Invest ten rand judiciously}{6}
+\clue{21}{D}{9}{6}{......}{Coin Dirk lost on the way up; Henry gets involved}{6}
+\clue{22}{D}{10}{6}{......}{Peek!}{6}
+\clue{23}{D}{13}{6}{......}{Neutral sounds and trite sayings arise all around Switzerland}{6}
+\clue{24}{D}{1}{7}{.....}{Servants genteel at heart? One of them
+is the butler at Blandings Castle!}
+{5}
+\clue{25}{D}{5}{7}{.....}{}{}
+\clue{27}{D}{7}{7}{.....}{}{}
+\clue{28}{D}{4}{8}{....}{Serving up only half a beer is a mistake}{4}
+\clue{29}{D}{12}{8}{....}{Footplay before strong no-trump not allowed}{4}
+
+\endinput
+%%
+%% End of file `grid2.tex'.
diff --git a/Master/texmf-dist/doc/latex/crosswrd/test0.tex b/Master/texmf-dist/doc/latex/crosswrd/test0.tex
index 3a01aa275bb..e8d105e6ed8 100644
--- a/Master/texmf-dist/doc/latex/crosswrd/test0.tex
+++ b/Master/texmf-dist/doc/latex/crosswrd/test0.tex
@@ -5,31 +5,33 @@
%% The original source files were:
%%
%% crosswrd.dtx (with options: `exa0')
-%%
-%% Copyright 1989 Brian Hamilton Kelly
-%% updated for LaTeX2e by Frank Mittelbach 96/12/06
+%% Copyright C 1989 Brian Hamilton Kelly
%%
%% crossword macros for LaTeX
+%% updated for LaTeX2e by Frank Mittelbach 96/12/06
+%% substantially extended by Dirk Laurie 08/01/18
%%
%% for documentation run latex crosswrd.dtx
%%
-%% This work may be distributed and/or modified under the
-%% conditions of the LaTeX Project Public License, either version 1.3
-%% of this license or (at your option) any later version.
-%% The latest version of this license is in
-%% http://www.latex-project.org/lppl.txt
-%% and version 1.3 or later is part of all distributions of LaTeX
-%% version 2005/12/01 or later.
+%% distribution consist of
%%
-%% This work has the LPPL maintenance status `unmaintained'.
+%% crosswrd.dtx source
+%% crosswrd.ins installation script
+%% 00readme
%%
-%% This work consists of the files crosswrd.dtx, crosswrd.ins and README
-%% and the derived files test0.tex, test1.tex, grid0.tex, grid1.tex and crosswrd.sty.
+%% don't distribute this file without distributing the above
+%% files as well
%%
%% crosswrd.dtx
%% Copyright 1989 Brian Hamilton Kelly
%% updated for LaTeX2e by Frank Mittelbach 96/12/06
%% Updated for LPPL 1.3c or later by Clea F. Rees (for Frank Mittelbach), 2008/10/06.
+%%
+%% Upgraded with many new features by Dirk Laurie 2010/02/01
+
+
+
+
\documentclass{article}
\usepackage{crosswrd}
\pagestyle{empty}
@@ -42,6 +44,8 @@
\end{crossword}
\end{document}
+
+
\endinput
%%
%% End of file `test0.tex'.
diff --git a/Master/texmf-dist/doc/latex/crosswrd/test1.tex b/Master/texmf-dist/doc/latex/crosswrd/test1.tex
index 9df2cf39cf2..7b3da7f7123 100644
--- a/Master/texmf-dist/doc/latex/crosswrd/test1.tex
+++ b/Master/texmf-dist/doc/latex/crosswrd/test1.tex
@@ -5,31 +5,33 @@
%% The original source files were:
%%
%% crosswrd.dtx (with options: `exa1')
-%%
-%% Copyright 1989 Brian Hamilton Kelly
-%% updated for LaTeX2e by Frank Mittelbach 96/12/06
+%% Copyright C 1989 Brian Hamilton Kelly
%%
%% crossword macros for LaTeX
+%% updated for LaTeX2e by Frank Mittelbach 96/12/06
+%% substantially extended by Dirk Laurie 08/01/18
%%
%% for documentation run latex crosswrd.dtx
%%
-%% This work may be distributed and/or modified under the
-%% conditions of the LaTeX Project Public License, either version 1.3
-%% of this license or (at your option) any later version.
-%% The latest version of this license is in
-%% http://www.latex-project.org/lppl.txt
-%% and version 1.3 or later is part of all distributions of LaTeX
-%% version 2005/12/01 or later.
+%% distribution consist of
%%
-%% This work has the LPPL maintenance status `unmaintained'.
+%% crosswrd.dtx source
+%% crosswrd.ins installation script
+%% 00readme
%%
-%% This work consists of the files crosswrd.dtx, crosswrd.ins and README
-%% and the derived files test0.tex, test1.tex, grid0.tex, grid1.tex and crosswrd.sty.
+%% don't distribute this file without distributing the above
+%% files as well
%%
%% crosswrd.dtx
%% Copyright 1989 Brian Hamilton Kelly
%% updated for LaTeX2e by Frank Mittelbach 96/12/06
%% Updated for LPPL 1.3c or later by Clea F. Rees (for Frank Mittelbach), 2008/10/06.
+%%
+%% Upgraded with many new features by Dirk Laurie 2010/02/01
+
+
+
+
\documentclass{article}
\usepackage{crosswrd}
\pagestyle{empty}
@@ -38,7 +40,7 @@
\begin{document}
\section*{A Sample Crossword}
\textit{(Chamber's Twentieth Century dictionary)}
- \begin{crossword}{15}{?}
+ \begin{crossword}{15}{N}
\input{grid1}
\end{crossword}
\begin{crossword*}{15}{Solution to grid 0}
@@ -46,6 +48,8 @@
\end{crossword*}
\end{document}
+
+
\endinput
%%
%% End of file `test1.tex'.
diff --git a/Master/texmf-dist/doc/latex/crosswrd/test2.tex b/Master/texmf-dist/doc/latex/crosswrd/test2.tex
new file mode 100644
index 00000000000..d9e388d90c5
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/crosswrd/test2.tex
@@ -0,0 +1,50 @@
+%%
+%% This is file `test2.tex',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% crosswrd.dtx (with options: `exa2')
+%% Copyright C 1989 Brian Hamilton Kelly
+%%
+%% crossword macros for LaTeX
+%% updated for LaTeX2e by Frank Mittelbach 96/12/06
+%% substantially extended by Dirk Laurie 08/01/18
+%%
+%% for documentation run latex crosswrd.dtx
+%%
+%% distribution consist of
+%%
+%% crosswrd.dtx source
+%% crosswrd.ins installation script
+%% 00readme
+%%
+%% don't distribute this file without distributing the above
+%% files as well
+%%
+%% crosswrd.dtx
+%% Copyright 1989 Brian Hamilton Kelly
+%% updated for LaTeX2e by Frank Mittelbach 96/12/06
+%% Updated for LPPL 1.3c or later by Clea F. Rees (for Frank Mittelbach), 2008/10/06.
+%%
+%% Upgraded with many new features by Dirk Laurie 2010/02/01
+
+
+
+
+
+
+\documentclass[a4paper]{article}
+\usepackage{a4wide,charter,crosswrd}
+\topmargin -20mm
+\textheight 240mm
+\begin{document}
+ \thispagestyle{empty}
+ \begin{crossword}[11]{13}{N}
+ \input grid2
+ \end{crossword}
+\end{document}
+
+\endinput
+%%
+%% End of file `test2.tex'.
diff --git a/Master/texmf-dist/source/latex/crosswrd/crosswrd.dtx b/Master/texmf-dist/source/latex/crosswrd/crosswrd.dtx
index edf15c4ca90..741e54f8e87 100644
--- a/Master/texmf-dist/source/latex/crosswrd/crosswrd.dtx
+++ b/Master/texmf-dist/source/latex/crosswrd/crosswrd.dtx
@@ -3,6 +3,8 @@
%% Copyright 1989 Brian Hamilton Kelly
%% updated for LaTeX2e by Frank Mittelbach 96/12/06
%% Updated for LPPL 1.3c or later by Clea F. Rees (for Frank Mittelbach), 2008/10/06.
+%%
+%% Upgraded with many new features by Dirk Laurie 2010/02/01
%
% This work may be distributed and/or modified under the
% conditions of the LaTeX Project Public License, either version 1.3
@@ -22,11 +24,12 @@
\ProvidesFile{crosswrd.dtx}
%</dtx>
%<+package>\NeedsTeXFormat{LaTeX2e}[1995/12/01]
+%<+package>\RequirePackage{ifthen}
%<+package>\ProvidesPackage{crosswrd}
%<*dtx,package>
% \fi
% \ProvidesFile{crosswrd.dtx}
- [1996/12/06 v2.8b Generating crosswords (BHK)]
+ [2010/02/01 v3.0 Generating crosswords (BHK,DPL)]
%
% \iffalse
%</dtx,package>
@@ -40,7 +43,7 @@
%</driver>
% \fi
%
-% \CheckSum{671}
+% \CheckSum{813}
%
% \let\ifBigTeX=\iftrue ^^A Change this in the obvious fashion if an
% ^^A enlarged (>75k maxmem) version of TeX is available
@@ -67,12 +70,17 @@
% \changes{v2.5}{89/09/01}{Final revisions for publication}
% \changes{v2.6}{89/10/13}{Consistent indentation of {\tt\protect\bslash
% def}s}
+% \changes{v2.9}{07/12/19}{Variable dimensions and type sizes, does barred
+% grids, does rectangular grids, tests label compatibility, complete
+% rewrite of grid population code}
+% \changes{v3.0}{10/02/01}{LPPL copyright notice included}
%
% \title{Some Macros to Draw Crosswords\thanks{This file is \fileversion,
% dated \filedate}}
% \author{B Hamilton Kelly\thanks{Especial thanks to my colleague Niel
% Kempson for many helpful suggestions, and to Frank Mittelbach of the
-% Johannes Gutenberg University of Mainz, who saved me two pages of code!}}
+% Johannes Gutenberg University of Mainz, who saved me two pages of code!}
+% \\ Extensions by Dirk Laurie}
% \maketitle
% \begin{abstract}
% The {\sf crossword} environment is intended to be used to typeset
@@ -104,11 +112,20 @@
%
% The macros presented in this document provide a \LaTeX{} method of
% typesetting these, and also assist the composer to ensure that the
-% ``grid'' all goes together correctly. The grid generated is the more
+% ``grid'' all goes together correctly. That is to say, checks
+% are made that crossing lights have the same letter where they cross,
+% lights starting at the same square have the same clue number,
+% and clue numbers are in sequence from 1 upwards when reading
+% from top left to bottom right.
+
+% The grid generated can be the more
% usual form, with black squares separating the ``lights'' which receive the
-% answers to the clues. Work is in hand to be able to handle the {\sl
-% Mephisto/Azed\/} type of grid, in which only thicker grid lines
-% separate the lights.
+% answers to the clues, or the {\sl Mephisto/Azed\/} type of grid,
+% in which only thicker grid lines separate the lights, or even
+% a mixture of these. The user need not specify which type of grid
+% is to be used, since they are both described by the same simple rule:
+% a bar is drawn between every pair of adjacent
+% light squares that do not belong to the same light.
%
% A sample crossword appears as Figure~\ref{crossword:1}; I've left the
% grid blank for those who want some intellectual exercise: those who don't
@@ -118,10 +135,15 @@
%
% \DescribeEnv{crossword}
% The whole crossword, including the \verb+\clue+ commands ({\it q.v}.),
-% is bracketed within the {\sf crossword} environment. This requires that
-% the user specifies two parameters:\begin{description}
-% \item[\meta{gridsize}] This is a number which specifies the columns
-% (and rows) in the square grid.
+% is bracketed within the {\sf crossword} environment. The user may
+% specify one optional and must specify two required parameters:
+% \begin{description}
+% \item[\meta{gridrows}] The number of rows
+% in the rectangular grid. If supplied, it must be enclosed in
+% square brackets. It may be omitted if the number of rows
+% equals the number of columns.
+% \item[\meta{gridcols}] The number of columns
+% in the rectangular grid.
% \item[\meta{visible}] This controls whether the answers are to be
% ``filled in''; obviously of no use for publication, but useful whilst
% composing the crossword. If the parameter provided is the letter `{\tt
@@ -136,10 +158,10 @@
% An analogous environment is provided especially for typesetting a smaller
% version of a grid showing, for example, ``Last Month's Solution''. In
% this of course, the answers {\em always\/} appear, and the clues are not
-% printed. Again it takes two parameters:
+% printed. Again it takes three parameters, the first optional:
% \begin{description}
-% \item[\meta{gridsize}] As before, this specifies the number of squares
-% in each axis.
+% \item[\meta{gridrows, gridcols}] As before, these specify the number
+% of squares in the two axes.
% \item[\meta{header\_text}] Some text which will be set (in {\bf bold})
% above the completed grid.
% \end{description}
@@ -149,10 +171,10 @@
% \protect\TeX's}
% Here is an example of the {\sf crossword*}
% environment:
-%
+% {\centering
% \begin{crossword*}{15}{Last month's solution}
% \MakePercentComment \input{grid0} \MakePercentIgnore
-% \end{crossword*}
+% \end{crossword*}}
% \else
% Figure~\ref{crossword:2} shows an example of the {\sf crossword*}
% environment.
@@ -172,9 +194,12 @@
% \item[\meta{row\_number}] The $y$-coordinate of the first square of the
% light. The top-most row is numbered 1.
% \item[\meta{answer}] The answer to the clue (or that part of it which
-% appears in the light numbered \meta{clue\_number}). This must be a
-% string of upper-case letters {\em only\/}; no spaces, punctuation,
-% hyphens, etc.
+% appears in the light numbered \meta{clue\_number}). Traditionally
+% in a completed grid, this is a
+% string of upper-case letters, but spaces in between are silently ignored,
+% lower case letters are equally OK, and some other characters such as
+% question mark and fullstop are useful as placeholders in an
+% uncompleted grid. No hyphens or apostrophes, though.
% \item[\meta{text}] The text of the clue itself. If you want to use any
% \LaTeX{} macros in this text, such as \verb+\dots+, each such macro must
% be preceded by \verb+\noexpand+. This includes such macros as \verb+\&+,
@@ -183,28 +208,54 @@
% this will most usually be used for giving the length of the answer, such
% as ``7'' or ``2,6,3-3''. Also used when the text of the clue is
% associated with another light when this parameter may say something like
-% ``see 14d''.
+% ``see 14d''. If this parameter is left \emph{absolutely empty},
+% not merely blank, i.e.\ \verb+{}+, the clue (if any)
+% will not be printed at all.
% \end{description}
+%
+% \subsection{Customizing the layout}
+% Some definitions made when entering the {\sf crossword} environment
+% may be overridden by the user inside the environment.
+% \begin{verbatim}
+% \unitlength 6mm
+% \def\Preamble{}
+% \def\cluewidth{70mm}
+% \let\numbersize\tiny
+% \let\cluesize\ninept
+% \def\barwidth{0.1}
+% \end{verbatim}
+% These refer respectively to size of grid cells, text to be set between
+% the diagram and the clues,
+% width of clue columns, typesize of numbers in grid, type size of
+% clues, and width of bars in \verb+\unitlength+s.
+%
+% If you override
+% \verb+\cluesize+ by a \LaTeX\ size command
+% like \verb+\normalsize+, you will probably feel that there is too much
+% vertical space between the clues. The only good solution is to
+% write your own macro by adapting the definition of \verb+\ninept+
+% given below.
%
+
% \subsection{How to Specify Clue Numbers}\label{clue-numbers}
%
% Sometimes the solution to one clue is split amongst a number of
-% ``lights''. To cover this eventuality, provide a \verb+\clue+ for {\em
+% lights. To cover this eventuality, provide a \verb+\clue+ for {\em
% each\/} of the lights involved, with the solution to that light {\em
% alone\/} given as \meta{answer}. All except the \verb+\clue+
% corresponding to the first light of the solution should have a null
-% \meta{text}, and the \meta{help} parameter should be something like
+% \meta{text}, and the \meta{help} parameter might be something like
% ``see 7d''.
%
% \changes{v2.4}{89/08/15}{Support for empty help field}
-% If this final parameter is totally empty, no corresponding clue number
-% is printed: this facility would be used when the current clue is the
-% next consecutive light, when it is usual to omit any further reference
-% to the clue number.
+% If you wish to omit any further reference
+% to the clue number (the usual practice when the current clue
+% applies to consecutive lights, or in hard cryptics),
+% leave the \meta{help} field totally empty.
%
% The \verb+\clue+ for the first light of the solution
% should provide the {\em entire\/} clue as its \meta{text}, and the
-% \meta{help} should say something like ``7,3-3''. The \meta{clue\_number}
+% \meta{help} might say something like ``7,3-3''. The \meta{clue\_number}
% field should consist of the number of that light, followed immediately
% by the text required to describe the other lights, separated from it by
% some non-digit character, for example, a space.
@@ -213,7 +264,7 @@
% \end{multicols}
%
% \begin{figure*}[tp]
-% \begin{crossword}{15}{N}
+% \begin{crossword}{15}{N}
% \MakePercentComment \input{grid1} \MakePercentIgnore
% \end{crossword}
% \caption{A Sample Crossword}\label{crossword:1}
@@ -225,7 +276,7 @@
% for the {\tt\string\&}}
% \begin{verbatim}
% \clue{13}{A}{5}{1}{PARLIAMENT}{}{see 9d}
-% \clue{9 {\noexpand\rm\&} 13a}{D}{1}{10}{ACTOF}%
+% \clue{9 {\noexpand\rm\&} 13a}{D}{1}{10}{ACT OF}%
% {Bill's desired outcome?}{3,2,10}
% \end{verbatim}
% will produce\begin{description}
@@ -245,6 +296,7 @@
% \end{figure}
% \fi
%
+
% \StopEventually{\PrintIndex
% \PrintChanges
% \ifBigTeX
@@ -258,8 +310,8 @@
%
% \begin{macro}{\ninept}
% \begin{macro}{\@listi}
-% We define a new font size to ensure clues are set at 9pt, no matter what
-% style size option is in effect. This command also defines suitable
+% We define a new 9pt font size for setting clues.
+% This command also defines suitable
% parameters for list environments set in this size of type.
%
% \begin{macrocode}
@@ -283,7 +335,7 @@
% \begin{macro}{\numberitfalse}
%
% The {\sf crossword} environment draws a grid (with black and white
-% squares); each ``light'' into which a clue's answer is to be written has
+% squares); each light into which a clue's answer is to be written has
% to be numbered, and this number will be typeset (using \verb+\tiny+) in
% the top-left corner of the first square of the light.
%
@@ -300,21 +352,27 @@
% \end{macro}
% \end{macro}
%
-% \begin{macro}{\gr@dsize}
+% \begin{macro}{\gridr@ws}
+% \begin{macro}{\gridc@ls}
% \changes{v2.3}{89/05/17}{Use a raw \protect\TeX\protect\space counter}
+% \begin{macro}{\p@rsize}
% \begin{macro}{\p@csize}
% \changes{v2.3}{89/05/17}{Use a raw \protect\TeX\protect\space counter}
-% The counter \verb+\gr@dsize+ is used to hold the width of the grid, as the
-% number of squares in each direction.
+% \changes{v2.9}{07/12/05}{Define more counters to allow rectangular grids.}
+% The counters \verb+\gridr@ws+, \verb+\gridc@ls+, are used to hold the
+% width of the grid, as the number of squares in each direction.
%
-% To prevent too much run-time arithmetic, the counter \verb+\p@csize+ is set
-% to be one count higher than \verb+\gr@dsize+.
+% To prevent too much run-time arithmetic, the counters \verb+\p@rsize+,
+% \verb+\p@csize+ are set to be one count higher than \verb+\gridc@ls+,
+% \verb+\gridr@ws+.
% \begin{macrocode}
-\newcount{\gr@dsize}
-\newcount{\p@csize}
+\newcount{\gridr@ws}\newcount{\gridc@ls}
+\newcount{\p@rsize}\newcount{\p@csize}
% \end{macrocode}
% \end{macro}
% \end{macro}
+% \end{macro}
+% \end{macro}
%
% \begin{macro}{\Down}
% \changes{v2.3}{89/05/17}{Use a raw \protect\TeX\protect\space counter}
@@ -370,26 +428,28 @@
% \changes{v2.8a}{96/07/22}{Removed string from \cs{@writefile} arg (FMi)}
% \changes{v2.8a}{96/07/22}{Make clue column texts accessible (FMi)}
% \begin{macrocode}
- \@writefile{acr}{\begin{minipage}[t]{70mm}}%
+ \@writefile{acr}{\begin{minipage}[t]{\cluewidth}}%
\@writefile{acr}{ \centerline{\textbf{\ACROSStext}}}%
\@writefile{acr}{ \sloppy}%
- \@writefile{acr}{ \ninept}%
+ \@writefile{acr}{ \cluesize}%
\@writefile{acr}{ \begin{ClueList}}%
% \end{macrocode}
% Whilst something similar goes into the {\tt.dwn} file.
% \begin{macrocode}
- \@writefile{dwn}{\begin{minipage}[t]{70mm}}%
+ \@writefile{dwn}{\begin{minipage}[t]{\cluewidth}}%
\@writefile{dwn}{ \centerline{\textbf{\DOWNtext}}}%
\@writefile{dwn}{ \sloppy}%
- \@writefile{dwn}{ \ninept}%
+ \@writefile{dwn}{ \cluesize}%
\@writefile{dwn}{ \begin{ClueList}}}
% \end{macrocode}
-% \end{macro}
+% \end{macro}\end{macro}\end{macro}
%
% \begin{macro}{\ACROSStext}
% \changes{v2.8a}{96/07/22}{Make clue column texts accessible (FMi)}
% \begin{macro}{\DOWNtext}
% \changes{v2.8a}{96/07/22}{Make clue column texts accessible (FMi)}
+% You may (e.g.\ if the crossword is not in English) prefer to change
+% the column text headers.
% \begin{macrocode}
\newcommand\ACROSStext{ACROSS}
\newcommand\DOWNtext{DOWN}
@@ -425,8 +485,6 @@
}
% \end{macrocode}
% \end{macro}
-% \end{macro}
-% \end{macro}
%
% \subsection{Tabulating the Clues}
% The auxiliary files contain the texts of the clues, each given as an
@@ -470,17 +528,20 @@
%
% \section{Creating the Grid}
% The remaining commands are concerned with creating (and, optionally,
-% populating) the crossword grid
+% populating) the crossword grid.
%
-% \begin{macro}{\crossword}
+% \begin{macro}{crossword}
+% \begin{macro}{\c@ls}
%
-% The {\sf crossword} environment takes two parameters: {\em viz}.~the
-% size of the matrix, and the indication of whether the grid is to include
-% the answers. (If the latter is omitted, \LaTeX\ will request it
-% interactively.)
+% The {\sf crossword} environment takes three parameters: {\em viz}.~the
+% number of rows (optional, may be omitted if the grid is square) and
+% columns of the matrix, and the indication of whether the grid is to include
+% the answers. (If the latter is not Y or N, \LaTeX\ will request it
+% interactively.) The macro \verb+\c@ls+ is a communication mechanism.
%
% \begin{macrocode}
-\def\crossword#1#2{%
+\newenvironment{crossword}[3][\c@ls]{%
+ \def\c@ls{#2}
% \end{macrocode}
%
% \changes{v2.4}{89/08/15}{Group within \string\crossword\space environment}
@@ -488,20 +549,34 @@
% We start off with a \verb+\vtop+ box and a group to hold everything
% within the environment, so as to ensure that user-entered text remains
% with the crossword.
+% \changes{v2.9}{07/12/04}{Changed to environment syntax, with
+% optional argument for rectangular grids}
%
% \begin{macrocode}
\endgraf\leavevmode
\vtop\bgroup
% \end{macrocode}
%
+% \begin{macro}{\Header}
+% \begin{macro}{\cluewidth}
+% \begin{macro}{\numbersize}
+% \begin{macro}{\cluesize}
+% \begin{macro}{\barwidth}
% The {\sf crossword} environment uses the full-size grid, and has the
% lights numbered. Furthermore it doesn't have any heading to output (see
-% the {\sf crossword*} environment).
+% the {\sf crossword*} environment).
+% Some other macros are given so that the user can customize the layout.
%
% \begin{macrocode}
\unitlength 6mm\numberittrue
\def\Header{}%
+ \def\Preamble{}%
+ \def\cluewidth{70mm}
+ \let\numbersize\tiny
+ \let\cluesize\ninept
+ \def\barwidth{0.1}
% \end{macrocode}
+% \end{macro}\end{macro}\end{macro}\end{macro}\end{macro}
%
% We now open the auxiliary files into which the clues are written, and
% determine (interactively if necessary) whether the answers are to be
@@ -509,21 +584,22 @@
%
% \begin{macrocode}
\OpenClueFiles
- \TestAnswers{#2}%
+ \TestAnswers{#3}%
% \end{macrocode}
%
-% Finally, we generate the necessary macros to describe the grid as being
-% entirely filled with black squares; for each square, a macro whose name is
-% of the form \verb+\RiCi+, \verb+\RxiiCviii+, {\em etc}.\ is created. As
-% the \verb+\clue+ commands are read in, these will be redefined to produce
-% the correct appearance when the macros are later expanded.
-%
+% Finally, we generate the necessary macros to describe the grid.
+% For each square, there are three macros. For example, corresponding
+% to the square in row 4 from the top, column 2 from the
+% left, the macros are: \smallskip \\ \hspace{1cm}
+% \begin{tabular}{ll}
+% \verb+\LetterRivCii+ & Letter in the square; \texttt{!} is used for a black square.\\
+% \verb+\NumberRivCii+ & Number in the square; 0 is used for a numberless square.\\
+% \verb+\BarRivCii+ & Code defining bars around the square, defined below.
+% \end{tabular} \smallskip \\
+%
% \begin{macrocode}
- \SetUpGrid{#1}}
+ \SetUpGrid{#1}{\c@ls}}
% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\endcrossword}
%
% When all the clues have been processed, we can invoke \verb+\FinishGrid+
% to draw the grid. The \verb+\FinishGrid+ and \verb+\PrintClues+ commands
@@ -536,7 +612,7 @@
% we'll print it just above the grid itself.
%
% \begin{macrocode}
-\def\endcrossword{\endgraf
+{\endgraf
\centerline{\Header}%
\hbox{\FinishGrid}%
% \end{macrocode}
@@ -549,24 +625,27 @@
% Finally, we complete the group and the \verb+\vtop+ box.
%
% \begin{macrocode}
+ \ifthenelse {\equal{\Preamble}{}} {}
+ {\centerline{\parbox{\textwidth}{\Preamble}}\medskip}
\CloseClueFiles
\hbox{\PrintClues}%
\egroup
}
% \end{macrocode}
-% \end{macro}
+% \end{macro}\end{macro}
%
-% \begin{macro}{\crossword*}
-% \changes{v2.6}{89/10/13}{Removed {\tt\protect\bslash iffalse} hack}
-% \begin{macro}{\endcrossword*}
-% \changes{v2.1}{89/04/27}{No longer opens {\tt.acr} and {\tt.dwn} files}
+% \begin{macro}{crossword*}
+% \changes{v2.1}{89/04/27}{No longer opens {\tt.acr} and {\tt.dwn} files}
% \changes{v2.6}{89/10/13}{Removed {\tt\protect\bslash iffalse} hack}
+% \changes{v2.9}{07/12/04}{Changed to environment syntax, with
+% optional argument for rectangular grids}
% The {\sf crossword*} environment doesn't need a second parameter to
% control printing of answers, because it {\bf always} populates the grid
% with the answers. Instead, its second parameter provides the text to
% appear above the printed grid. Its actions are as for the {\sf
% crossword} environment except that\begin{itemize}
-% \item It prints the descriptive text above the grid.
+% \item It assumes that there is descriptive text above the grid
+% and allows room for it.
% \item It {\bf always} outputs the answers, without numbers.
% \item It draws them in a smaller box.
% \item It doesn't output the clues (it doesn't even open any
@@ -574,38 +653,92 @@
% \end{itemize}
%
% \begin{macrocode}
-\expandafter\def\csname crossword*\endcsname#1#2{%
+\newenvironment{crossword*}[3][\c@ls]{%
+ \def\c@ls{#2}
\unitlength 4mm\numberitfalse
+ \def\barwidth{0.1}
\endgraf\leavevmode
\vtop\bgroup
- \def\Header{{\bf\strut #2}}%
+ \def\Header{{\bf\strut #3}}%
\def\answer{Y}%
\let\tf@dwn=\relax \let\tf@acr=\relax
- \SetUpGrid{#1}}
-
-\expandafter\def\csname endcrossword*\endcsname{\endgraf
+ \SetUpGrid{#1}{#2}}
+{\endgraf
\centerline{\Header}%
\hbox{\FinishGrid}%
\egroup
}
% \end{macrocode}
% \end{macro}
-% \end{macro}
-%
-% \subsection{Macros used when Populating the Grid}
%
-% \begin{macro}{\laterletter}
-% \changes{v2.1}{89/04/27}{Used to be {\tt\protect\bslash letterput}}
-% The following macro calls this to ``place'' the letters of a solution by
-% defining a macro unique to this square.
-%
+% \subsection{Macros for each square}
+% \changes{v2.9}{07/12/19}{The part of the code dealing with grid details has
+% been completely rewritten. (DPL)}
+% \begin{macro}{\ind@x}
+% \begin{macro}{\arr@yref}
+% \begin{macro}{\value}
+% \begin{macro}{\assign}
+% \begin{macro}{\addto}
+% Crosswords are inherently two-dimensional, and require matrices
+% of related definitions. Since \TeX\ does not allow numbers in
+% a name, each square has a unique text index using \texttt{R} and
+% \texttt{C} followed by roman numerals. Each macro name consists
+% of a prefix (the same for all squares) followed by the unique
+% text index. The original version of this
+% package had only one such macro for each square, with an empty prefix,
+% but in this version we have three: \texttt{Letter}, \texttt{Number}
+% and \texttt{Bar}.
+%
+% For readability of the code, the following macros provide bracket
+% syntax, thereby avoiding the use of \verb+\csname+\ldots\verb+\endcsname+
+% elsewhere.
+% For example, \verb+\value Bar[2,5]+ gives \verb+\BarRiiCv+.
+% A new definition \texttt{NEW} is assigned by \verb+\assign Bar[2,5]=NEW;+.
+% If the contents of \verb+\BarRiiCv+ is a number, you can add 31
+% to it using \verb"\addto Bar[2,5]+=31;". In both cases, the semicolon
+% is essential.
+% \begin{macrocode}
+\def\ind@x#1#2{R\romannumeral #1C\romannumeral#2}
+\def\arr@yref#1#2#3{\csname #1\ind@x{#2}{#3}\endcsname}
+\def\value#1[#2,#3]{\arr@yref{#1}{#2}{#3}}
+\def\assign#1[#2,#3]=#4;%
+{\expandafter\edef\csname #1\ind@x{#2}{#3}\endcsname{#4}}
+\newcount\accumulat@r
+\def\addto#1[#2,#3]+=#4;%
+{\accumulat@r=\value #1[#2,#3] \advance\accumulat@r by #4
+ \assign #1[#2,#3]=\the\accumulat@r;}
+% \end{macrocode}
+% \end{macro}\end{macro}\end{macro}\end{macro}\end{macro}
+
+% We do bars as follows: in addition to \verb+\RiCii+ etc which define the
+% contents of a square, there is a bar code \verb+\BarRiCii+ etc with
+% the following meaning:
+% \begin{enumerate}
+% \item[0:] no bar above or to the left of the square
+% \item[1:] bar above the square
+% \item[2:] bar to the left of the square
+% \item[3:] bars above and to the left of the square
+% \end{enumerate}
+% At the start, all bar codes are set to 3;
+% the bars between letters are erased as we go along.
+
+% \subsection{Macros used while processing the clues}
+
+% \begin{macro}{\lettercount}
+% \begin{macro}{\Barcode}
+% As we move along the letters of the answer, we count
+% the number of letters processed in \verb+\lettercount+.
+% The code for the bar to be erased (1 or 2) is put
+% into \verb+Barcode+ before we start on each answer.
% \begin{macrocode}
-\def\laterletter#1{\setsquare{\lettersquare{#1}}}
+\newcount\lettercount
+\newcount\Barcode
% \end{macrocode}
-%
+% \end{macro}
+% \end{macro}
+
% \begin{macro}{\nextletter}
% \begin{macro}{\nextlet}
-%
% To determine how much space is required for the light corresponding to
% an answer, we need to cycle through each of the characters of the answer
% individually; this macro is called with two parameters --- the first
@@ -615,7 +748,7 @@
% When it is called, this ``second'' parameter is {\em not\/} enclosed in
% braces, so only the first token in it is accessed. The macro calls
% itself recursively to process the remaining characters until the
-% \verb+\@nil+ has been met.
+% \verb+\@nil+ has been met.
%
% \changes{v2.1}{89/04/27}{Can now process {\em first\/} letter of light}
% \begin{macrocode}
@@ -633,11 +766,22 @@
% \end{macrocode}
%
% Otherwise, we have another letter of the \meta{answer} in {\tt\#2}, so we
-% call \verb+\letterput+ to define the macro corresponding to this square,
-% and count one more position occupied in the current direction.
+% save the letter and check that it does not conflict with an earlier letter
+% in the same square.
%
% \begin{macrocode}
- \else\letterput{#2}\advance#1 by \@ne
+ \else \immediate\edef\Before{\value Letter[\Down,\Across]}
+ \assign Letter[\Down,\Across]=#2;
+ \immediate\edef\After{\value Letter[\Down,\Across]}
+ \if \Before ! \else \if \Before \After
+ \else \errhelp{You mistyped an answer, or miscounted the coordinates.}
+ \errmessage{Letter "\After" conflicts with earlier "\Before"
+ in row \the\Down, column \the\Across}
+ \fi \fi
+% If the letter is not the first letter of its answer, we erase a bar.
+ \ifnum \lettercount>0 \addto Bar[\Down,\Across]+=-\Barcode; \fi
+% Advance another position in the current direction.
+ \@gobble{#2} \advance#1 by \@ne \global\advance \lettercount by \@ne
% \end{macrocode}
%
% After we've processed this letter, we want to call this routine
@@ -646,13 +790,6 @@
% \changes{v2.1}{89/04/27}{Change to handle subsequent letters of light}
% \begin{macrocode}
\let\nextlet=\nextletter
-% \end{macrocode}
-%
-% These letters cannot possibly require a starting square number, so we
-% use a simpler macro for these later letters.
-%
-% \begin{macrocode}
- \let\letterput=\laterletter
\fi
% \end{macrocode}
%
@@ -666,214 +803,9 @@
% \end{macrocode}
% \end{macro}
% \end{macro}
-% \end{macro}
-%
-%
-% \begin{macro}{\blacktest}
-% Later we shall want to check that the square into which we are ``putting''
-% a letter is either black (and hence should be changed to contain the
-% character) or has already had the {\em same\/} letter put into it by an
-% intersecting light.
-%
-% We don't want to expand each squares' macros, so these tests have to use
-% the \verb+\ifx+ primitive; therefore, we need a macro which has the same
-% substitution text {\em at the highest level}.
-%
-% \begin{macrocode}
-\def\blacktest{\blacksquare}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\ifneed@d}
-% \begin{macro}{\need@dtrue}
-% \begin{macro}{\need@dfalse}
-% As we create the macros corresponding to each occupied square, we have to
-% decide whether it is necessary to actually perform a (re)definition of the
-% macro; the following permits the code to determine whether such definition
-% takes place (within the \verb+\putsquare+ macro).
-%
-% \begin{macrocode}
-\newif\ifneed@d
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\ifNoerr}
-% \begin{macro}{\Noerrtrue}
-% \begin{macro}{\Noerrfalse}
-% If an error is detected during the placement of the occupied squares,
-% there will probably be other errors; to save pouring out yards of error
-% messages, we arrange to suppress all but the first such; the following
-% \verb+\newif+ provides this facility.
%
-% And of course we start without any errors!
-%
-% \begin{macrocode}
-\newif\ifNoerr
-\Noerrtrue
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\Number}
-% \begin{macro}{\Plain}
-% To determine whether a square has already been occupied, and if so, by
-% what, we require a couple of new tokens which can be tested for as the
-% result of a macro expansion
-% \begin{macrocode}
-\newtoks\Number \newtoks\Plain
-% \end{macrocode}
-%
-% \begin{macro}{\blank}
-% \begin{macro}{\numbered}
-% The next two definitions can be temporarily \verb+\let+ to be the
-% replacements for \verb+\lettersquare+ and \verb+\numbersquare+
-% respectively, for use in conjunction with the aforementioned test.
-%
-% \begin{macrocode}
-\def\blank#1{\Plain}
-\def\numbered#1#2{\Number}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\letterinsquare}
-% \begin{macro}{\letterinnumbersquare}
-% When we first read the clues, we create macros which are unique to each
-% square; later we shall redefine the macros to which the squares' macros
-% expand to actually perform the setting, but during the first phase we
-% require expansions which correspond to the parameters alone. The
-% following definitions are therefore used during the ``filling'' phase.
-%
-% \begin{macrocode}
-\def\letterinsquare#1{#1}
-\def\letterinnumbersquare#1#2{#2}
-% \end{macrocode}
-%
-% \begin{macro}{\setsquare}
-% As we scan the answers for each clue, this macro is called with a
-% parameter which specifies a call of either the \verb+\lettersquare+ or
-% \verb+\numbersquare+ macros (with appropriate parameters).
-%
-% It starts by assuming that no redefinition of the square's macro will be
-% required.
-%
-% \begin{macrocode}
-\def\setsquare#1{%
- \need@dfalse
-% \end{macrocode}
-%
-% This macro is also called during the initialization of the grid, when we
-% populate it with black squares; therefore, we definitely want to perform a
-% definition of the square's macro at this stage.
-%
-% \begin{macrocode}
- \ifx#1\blacksquare
- \need@dtrue
-% \end{macrocode}
-%
-% Otherwise, let's have a look and see what is already in the square's
-% macro. This test will succeed only if the square contains its initial
-% definition (as \verb+\blacksquare+).
-% \begin{macrocode}
- \else
- \expandafter\ifx\csname\ther@w\thec@l\endcsname\blacktest
-% \end{macrocode}
-%
-% in which case we {\em will\/} want to redefine the macro for this square
-%
-% \begin{macrocode}
- \need@dtrue
-% \end{macrocode}
-%
-% If the square has already been redefined, it means we've already ``put'' a
-% letter (or number+letter) into its definition, so we will have to check
-% that this definition doesn't conflict with the new one (which is in
-% {\tt\#1}). We have to expand the macros to perform this test, but don't
-% want that expansion to return anything except the letter which is being
-% (and has been) placed in the square, so we make a temporary replacement
-% for the two macros which might form our {\tt\#1}.
-% \begin{macrocode}
- \else
- \let\lettersquare=\letterinsquare
- \let\numbersquare=\letterinnumbersquare
-% \end{macrocode}
-%
-% Now we {\em expand\/} the original definition and the new one; these
-% should be the same!
-% \changes{v2.6}{89/10/13}{Minor revision of layout}
-%
-% \begin{macrocode}
- \expandafter\if\csname\ther@w\thec@l\endcsname#1
- \else
-% \end{macrocode}
-%
-% If they aren't, it means the compiler of the crossword has made a mistake
-% and has solutions which don't correctly intersect: tell him so (well, the
-% first time anyway). We even provide the user with some help!
-%
-% \begin{macrocode}
- \ifNoerr
- \errhelp{Two intersecting lights tried to
- put different letters^^Jin the same square!
- You've probably confused their coordinates.^^J
- Carry on, and examine the printout.}
- \errmessage{Illegal redefinition of square \ther@w\thec@l.
- Was: \expandafter\meaning\csname\ther@w
- \thec@l\endcsname.
- Now: \noexpand #1}
- \Noerrfalse
- \fi
- \fi
-% \end{macrocode}
-%
-% So far, we don't seem to need to change anything, but if the new {\tt\#1}
-% which has been passed to \verb+\putsquare+ specifies that it be numbered,
-% we must subsume any existing definition which {\em doesn't\/} have a
-% number.
-%
-% Again, we make temporary reassignments for the two potential macros, which
-% is where we make use of the two new tokens that we invented.
-%
-% \begin{macrocode}
- \let\lettersquare=\blank
- \let\numbersquare=\numbered
-% \end{macrocode}
-%
-% If the following test succeeds, we know that the new parameter specifies a
-% number as well as a letter. This code could be expanded to check whether
-% the original definition also specified a number, and if so ensure that
-% they are the same, but would anybody really be silly enough to give
-% different numbers for clues starting from the same square?!
-% \begin{macrocode}
- \expandafter\ifx#1\Number
- \need@dtrue
- \fi
- \fi
- \fi
-% \end{macrocode}
-%
-% Now we know whether we must (re)define the macro which is unique to this
-% square. If we must, we expand our {\tt\#1}, so as to get the actual
-% number and letter passed in through that parameter, but keep the name of
-% the placement macro itself\footnote{This will be the first token of the
-% parameter itself.} unexpanded.
-%
-% \begin{macrocode}
- \ifneed@d
- \expandafter\edef\csname\ther@w\thec@l\endcsname{\noexpand #1}
- \fi
-}
-% \end{macrocode}
-% \end{macro} ^^A \setsquare
-% \end{macro} ^^A \letterinnumbersquare
-% \end{macro} ^^A \letterinsquare
-%
+
% \subsection{The {\tt\protect\bslash clue} Command}
%
% \begin{macro}{\clue}
@@ -885,8 +817,31 @@
%
% \begin{macrocode}
\def\clue#1#2#3#4#5#6#7{%
+% \end{macrocode}
+% The $x$ and $y$ coordinate counters are set from the \meta{column} and
+% \meta{row} parameters.
+%
+% \begin{macrocode}
+ \Across=#3 \Down=#4
+% \end{macrocode}
+% The clue may be spread over more than one number, but the square
+% takes only the first of these.
+% \begin{macrocode}
\findnumber{#1}
% \end{macrocode}
+% Save the clue number, checking that it was not previously defined
+% to be something else.
+% \begin{macrocode}
+ \immediate\edef\Before{\value Number[\Down,\Across]}
+ \assign Number[\Down,\Across]=\cluenumber;
+ \immediate\edef\After{\value Number[\Down,\Across]}
+ \ifnum \Before>0 \ifnum \After=\Before
+ \else \errhelp
+ {You probably made a mistake when typing in one of the clues.}
+ \errmessage{Number {\After} conflicts with earlier {\Before}
+ in row \the\Down, column \the\Across}
+ \fi \fi
+% \end{macrocode}
%
% We now examine the second (\meta{Across/Down}) parameter of the
% \verb+\clue+ command to determine whether this is an Across or Down
@@ -902,13 +857,15 @@
% \meta{Across/Down} parameter is the letter `{\tt A}'. In this case, the
% counter to be incremented is \verb+\Across+.
% \changes{v2.8a}{96/07/22}{Removed string from \cs{@writefile} arg (FMi)}
+% \changes{v2.9}{07/12/19}{Change empty test to use \cs{ifthenelse}.
+% Testing by \cs{if} is a bug. (DPL)}
% \begin{macrocode}
\ifx#2A
- \if\@empty#7\relax\else
+ \global\Barcode=2
+ \ifthenelse{\equal{\@empty}{#7}}{}{
\ifx\tf@acr\relax\else
\@writefile{acr}{ \item[#1] #6 (#7)}%
- \fi
- \fi
+ \fi}
\let\Direction=\Across
\else
% \end{macrocode}
@@ -916,11 +873,11 @@
% file, and the \verb+\Down+ counter is incremented.
% \begin{macrocode}
\ifx#2D
- \if\@empty#7\relax\else
- \ifx\tf@dwn\relax\else
- \@writefile{dwn}{ \item[#1] #6 (#7)}%
- \fi
- \fi
+ \global\Barcode=1
+ \ifthenelse{\equal{\@empty}{#7}}{}{
+ \ifx\tf@dwn\relax\else
+ \@writefile{dwn}{ \item[#1] #6 (#7)}%
+ \fi}
\let\Direction=\Down
\else
% \end{macrocode}
@@ -937,39 +894,15 @@
\fi
% \end{macrocode}
%
-% The $x$ and $y$ coordinate counters are set from the \meta{column} and
-% \meta{row} parameters.
-%
-% \begin{macrocode}
- \Across=#3 \Down=#4
-% \end{macrocode}
-%
-% \begin{macro}{\letterput}
-% \changes{v2.1}{89/04/27}{Replacement for {\tt\protect\bslash firstletter}
-% method}
-%
-% The \verb+\letterput+ macro is defined anew at the start of each clue to
-% create the correct definition for the {\em first\/} square of each
-% light. The \verb+\setsquare+ macro redefines this macro internally for
-% the remaining squares.
-%
-% \begin{macrocode}
- \edef\letterput##1{\noexpand\setsquare
- {\noexpand\numbersquare
- {\noexpand\cluenumber}{##1}}}%
-% \end{macrocode}
-% \end{macro}
-%
% Now we can call \verb+\nextletter+ which will cycle through all the
% letters of the \meta{answer} until meeting the token \verb+\@nil+.
-% As each letter is processed, it creates a definition for the current
-% square, initially using the above definition, and then \verb+\laterletter+
-% for subsequent letters of the \meta{answer}.
-%
+% It will save the current letter and recursively call itself until no
+% letters are left.
% Finally, we ensure that the newlines after \verb+\clue+ commands don't
% lead to unwanted spaces being typeset.
% \changes{v2.6}{89/10/13}{Minor revision of layout}
% \begin{macrocode}
+ \global\lettercount=0
\nextletter{\Direction}#5\@nil
\ignorespaces
}
@@ -1026,7 +959,8 @@
% \changes{v2.6}{89/10/13}{Minor revision of layout}
% If the user did not provide a valid \meta{clue\_number} (i.e.\ something
% starting with a digit), then \verb+clueNumber+ will have zero assigned to
-% it --- seems the user ought to be told about this!
+% it. This will cause a diagnostic message at the stage when it is checked
+% that the clue numbers run consecutively in reading order from 1 upwards.
%
% This completes \verb+\findnumber+.
%
@@ -1055,13 +989,9 @@
% \changes{v2.2}{89/05/17}{Used {\tt\protect\bslash blackenrow} for inner loop}
% \changes{v2.8a}{96/07/22}{Fixed command to save val of \cs{iterate}
% not \cs{body} (FMi)}
-% For each column in a row we create a black square; effectively
-% \verb+\setsquare+ will execute the definition
-% \begin{macrocode}
-% \def\csname\ther@w\thec@l\endcsname{\blacksquare}
-% \end{macrocode}
-% so that for row~3 column~6 of a $15\times15$ grid, for example, we would
-% end up by defining \verb+\def\RiiiCvi{\blacksquare}+.
+% For each column in a row we create a black square by setting the
+% letter in the square to \texttt{!}. We also initialize the \texttt{Number}
+% and \texttt{Bar} macros.
%
% Before starting the inner loop, we need to save the definition of
% \verb+\body+ which was created for the outer loop. We cannot do this by
@@ -1070,12 +1000,14 @@
%
% Actually with \LaTeXe{} we have to save \verb=\iterate= as the internals
% of \verb=\loop= have been streamlined. With the old code only the first
-% row was updated---this is the rpcie for using an unpublished implementation
+% row was updated---this is the price for using an unpublished implementation
% feature.
% \begin{macrocode}
\def\blackenrow{\let\savediterate\iterate
\loop\relax\ifnum\Across>\z@
- \setsquare{\blacksquare}%
+ \assign Bar[\Down,\Across]=3;
+ \assign Letter[\Down,\Across]=!;
+ \assign Number[\Down,\Across]=0;
% \end{macrocode}
%
% We then shift ourselves back to the next column to the left and iterate.
@@ -1092,22 +1024,25 @@
% \end{macrocode}
%
% \begin{macro}{\SetUpGrid}
+% \changes{v2.9}{07/12/05}{Rectangular grids}
%
% This macro creates an empty grid of the appropriate size.
%
% \begin{macrocode}
-\def\SetUpGrid#1{%
+\def\SetUpGrid#1#2{%
% \end{macrocode}
%
-% We firstly make a note of the \meta{gridsize} parameter in the
-% \verb+\gr@dsize+ counter, from which the width and height of the grid
+% We firstly make a note of the \meta{gridcols} parameter in the
+% \verb+\gr@dcols+ counter, from which the width and height of the grid
% may be computed. We also set the \verb+\p@csize+ counter to be one
-% greater than \verb+\gr@dsize+ to save our recomputing this quantity many
-% times over.
+% greater than \verb+\gridc@ls+ to save our recomputing this quantity many
+% times over. Ditto mutatis mutandis for \meta{gridrows}.
%
% \begin{macrocode}
- \gr@dsize=#1
- \p@csize=#1 \advance\p@csize by \@ne
+ \gridr@ws=#1\gridc@ls=#2
+ \p@rsize=#1 \advance\p@rsize by \@ne
+ \p@csize=#2 \advance\p@csize by \@ne
+ \typeout{Grid has #1 rows and #2 columns.}
% \end{macrocode}
%
% Right, this is where we start to generate the grid itself. We start at
@@ -1116,7 +1051,7 @@
% number attainable.
%
% \begin{macrocode}
- \Down=\gr@dsize
+ \Down=\gridr@ws
% \end{macrocode}
%
% We now start a loop, so the following code will be repeated for each row
@@ -1126,7 +1061,7 @@
%
% \begin{macrocode}
\loop
- \Across=\gr@dsize
+ \Across=\gridc@ls
% \end{macrocode}
%
% Provided we haven't decremented down to the 0th row, we start off the
@@ -1155,22 +1090,6 @@
% \end{macro} ^^A \SetUpGrid
% \end{macro} ^^A \blackenrow
%
-% \begin{macro}{\thec@l}
-% \begin{macro}{\ther@w}
-% \verb+\thec@l+ and \verb+\ther@w+ macros generate a string of letters,
-% starting with `{\tt C}' (for column) and `{\tt R}' (for row) respectively.
-% The remainder of the string consists of the lower-case Roman numeral
-% equivalent to the current value of the appropriate counter. Such
-% all-letter strings are used to create the names for macros which can be
-% unique for each square of the grid.
-%
-% \begin{macrocode}
-\def\thec@l{C\romannumeral\Across}
-\def\ther@w{R\romannumeral\Down}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
% \begin{macro}{\TestAnswers}
% This macro interacts with the user, if necessary, to get a yes or no
% indication of whether the answers shall be written into the grid. No
@@ -1195,7 +1114,7 @@
% \end{macrocode}
% We can then extract just the first character
% \begin{macrocode}
- \edef\answer{\expandafter \f@rst \answer .}%
+ \edef\answer{\expandafter \f@rst \answer n.}%
% \end{macrocode}
% The we determine whether it's the letter `{\tt y}' or `{\tt n}'\dots
% \begin{macrocode}
@@ -1212,7 +1131,7 @@
% \begin{macrocode}
\edef\next{\def\noexpand\answer{\answer}}%
\uppercase\expandafter{\next}%
- \edef\answer{\expandafter \f@rst \answer .}%
+ \edef\answer{\expandafter \f@rst \answer n.}%
}
% \end{macrocode}
% \end{macro}
@@ -1221,25 +1140,27 @@
%
% \subsection{Setting the Grid}
%
-% \begin{macro}{\letter}
-% This is the expansion which is used (for \verb+\letterinsquare+,
-% and within the expansion of \verb+\numberedsquare+) when the grid is
-% actually being {\em typeset\/} from the stored squares' macros.
+% \begin{macro}{\putletter}
%
% \changes{v2.8a}{96/07/22}{use \cs{sffamily} (FMi)}
+% These macros put letters, numbers and bars at the current
+% \verb+[\Down,\Across]+ position. Note that \verb+\putletter+
+% would be redefined to \verb+\relax+ if no actual letters are required.
% \begin{macrocode}
-\def\letter#1{{\put(\Across,-\Down){\makebox(1,1){\sffamily #1}}}}
+\def\putletter{{\put(\Across,-\Down){\makebox(1,1)
+ {\sffamily \value Letter[\Down,\Across]}}}}
% \end{macrocode}
-%
-% \begin{macro}{\numberedsquare}
-% This macro is used (for \verb+\numbersquare+) when the lights are being
-% drawn with light numbering enabled. It puts the number (and the letter of
-% the answer too, depending upon the definition of \verb+\letter+ which is
-% current) at the current coordinate position specified by
-% \verb+(\Across,\Down)+.
+% \begin{macro}{\putnumber}
+% The \verb+\putnumber+ macro checks whether the clue number is 0 (which
+% means an unnumbered square) and whether the clue numbers are in
+% sequence. To this end, it makes use of global \verb+\oldnumber+
+% and \texttt{seqtest}.
% \begin{macrocode}
-\def\numberedsquare#1#2{%
- \put(\Across,-\Down){%
+\newcount\oldnumber \oldnumber=0
+\newif\ifseqtest \seqtestfalse
+\def\putnumber{\immediate\def\Number{\value Number[\Down,\Across]}
+ \ifnumberit \ifnum\Number>0
+ \put(\Across,-\Down){%
% \end{macrocode}
%
% To insert the clue number, we generate it within a sub-picture, of size
@@ -1250,37 +1171,57 @@
% \end{macrocode}
%
% We stick the number in the top-left corner of an (invisible) box which
-% fills the central 81\% of the area.
-%
-% \begin{macrocode}
- \put(0.05,0.05){\makebox(0.9,0.9)[tl]{\tiny #1}}
- \end{picture}%
- }
-% \end{macrocode}
-%
-% We also set the letter in the square (depending upon the definition of
-% \verb+\letter+ which applies.
+% fills the central 81\% of the area. In the process, we check whether
+% the clues are properly numbered in reading order.
%
% \begin{macrocode}
- \letter{#2}}
+ \put(0.05,0.05){\makebox(0.9,0.9)[tl]{\numbersize\Number}}
+ \end{picture}}
+ \ifnum \oldnumber>0 \advance\oldnumber by\m@ne
+ \ifnum \oldnumber=\Number {\seqtesttrue} \else
+ \ifseqtest
+ \errhelp{Clues should be numbered consecutively from top left
+ to bottom right.}
+ \errmessage{Found clue number \Number, but expected \the\oldnumber}
% \end{macrocode}
-%
-% \begin{macro}{\unnumberedsquare}
-% Despite its name, this macro is invoked (through \verb+\numbersquare+) for
-% those squares which would ordinarily carry a light's number, were it not
-% for the fact that the numbers have been suppressed by the {\sf crossword*}
-% environment.
-%
-% It just discards the \meta{clue\_number} given in the first parameter and
-% sets the current letter by invoking \verb+\letter+, which uses the second
-% parameter\dots
+% If a clue number was mistyped, it will generate two out-of-sequence
+% errors. We suppress the second of these.
%
% \begin{macrocode}
-\def\unnumberedsquare#1{\letter}
+ \seqtestfalse
+ \else\seqtesttrue\fi
+ \fi
+ \fi
+ \global \oldnumber=\Number
+\fi \fi
+}
% \end{macrocode}
-% \end{macro} ^^A \unnumberedsquare
-% \end{macro} ^^A \numberedsquare
-% \end{macro} ^^A \letter
+% \begin{macro}{\putbars}
+% If there are two adjacent light squares not belonging to the same light,
+% we draw a bar between them. We use two counters for that: one for the
+% previous square, so we can test for its blackness; one for the
+% changing value of the barcode for the current square.
+% \begin{macrocode}
+\newcount \pr@vious
+\newcount \c@de
+\def\putbars{ \linethickness{\barwidth\unitlength}
+ \c@de=\value Bar[\Down,\Across]
+ \ifnum \c@de>1 \advance\c@de by -2
+ \ifnum \Across>1
+ \pr@vious=\Across \advance \pr@vious by -1
+ \immediate\def\pr@vlet{\value Letter[\Down,\pr@vious]}
+ \if \pr@vlet ! \else \put(\Across,-\Down){\line(0,1){1}}
+ \fi \fi \fi
+ \ifnum \c@de>0
+ \ifnum \Down>1
+ \pr@vious=\Down \advance \pr@vious by -1
+ \immediate\def\pr@vlet{\value Letter[\pr@vious,\Across]}
+ \if \pr@vlet ! \else \put(\Across,-\pr@vious){\line(1,0){1}}
+ \fi \fi \fi
+}
+% \end{macrocode}
+%
+% \end{macro}\end{macro}\end{macro}
%
% \begin{macro}{\FinishGrid}
% Now we can process all the stored macros which define the appearance of
@@ -1291,62 +1232,28 @@
% different effects during the filling of the grid.
% \changes{v2.2}{89/05/17}{Removed extraneous opening space after brace}
% \changes{v2.6}{89/10/13}{Minor revision of layout}
+% \changes{v2.9}{07/12/05}{Rectangular grid, top right extra labels}
% \begin{macrocode}
\def\FinishGrid{%
% \end{macrocode}
%
% If the customer doesn't want the letters put into the grid, then we
-% need only throw away any parameter to \verb+letter+.
-%
-% \begin{macrocode}
- \if\answer Y \else \let \letter=\@gobble \fi
-% \end{macrocode}
-%
-% As stated in the introduction, when typesetting the grid in a smaller
-% version, there is insufficient space to include the numbers for the
-% lights; by testing \verb+\ifnumberit+ we can determine whether a macro
-% which expands to \verb+\numbersquare+ shall result in a number being
-% printed or not.
-%
-% \begin{macrocode}
- \ifnumberit
- \let\numbersquare=\numberedsquare
- \else
- \let\numbersquare=\unnumberedsquare
- \fi
-% \end{macrocode}
-%
-% Anything that's been stored as a \verb+\lettersquare+ is ``set'' using the
-% \verb+\letter+ macro (which we might have just \verb+\let+ equal to
-% \verb+\@gobble+).
-%
-% \begin{macrocode}
- \let\lettersquare=\letter
-% \end{macrocode}
-%
-% \begin{macro}{\blacksquare}
-% Any black squares that are still left in the grid are set by means of this
-% command:
+% need only let \verb+\putletter+ do nothing. Since \verb+\FinishGrid+
+% is invoked inside the environment, the original definition will be
+% restored on exit.
%
% \begin{macrocode}
- \def\blacksquare{%
-% \end{macrocode}
-%
-% The black square itself is merely a rule of the appropriate dimensions.
-%
-% \begin{macrocode}
- \put(\Across,-\Down){\rule{\unitlength}{\unitlength}}}
+ \if\answer Y \else \let\putletter\relax \fi
% \end{macrocode}
-% \end{macro}
-%
%
% Now we come to the actual body of \verb+\FinishGrid+.
%
% \changes{v2.6}{89/10/13}{Minor revision of layout}
+% \changes{v2.9}{07/12/05}{Rectangular grid}
% We start off at the bottom-most row of the grid\dots
%
% \begin{macrocode}
- \Down=\gr@dsize
+ \Down=\gridr@ws
% \end{macrocode}
%
% The whole grid is created in a centered \verb+\hbox+ in a {\sf picture}
@@ -1356,7 +1263,7 @@
%
% \begin{macrocode}
\centerline{%
- \begin{picture}(\p@csize,\p@csize)(1,-\p@csize)
+ \begin{picture}(\p@csize,\p@rsize)(1,-\p@rsize)
% \end{macrocode}
%
% We now cycle through each of the rows. The first thing we output is a
@@ -1366,14 +1273,14 @@
%
% \begin{macrocode}
\loop\ifnum\Down>\z@
- \put(1,-\Down){\line(1,0){\the\gr@dsize}}
+ \put(1,-\Down){\line(1,0){\the\gridc@ls}}
% \end{macrocode}
%
% Now we are about to cycle across all the columns of the current row;
% again, it's convenient for us to work backwards to the left\dots
%
% \begin{macrocode}
- \Across=\gr@dsize
+ \Across=\gridc@ls
% \end{macrocode}
%
% To do this we need an inner loop; this has to be inside a group so as to
@@ -1383,13 +1290,16 @@
{\loop \ifnum\Across>\z@
% \end{macrocode}
%
-% To set the appropriate object in this square, we merely invoke the macro
-% which has been associated with the square. Thus we'll end up with a black
-% square, or a numbered or plain square, the latter two of which may also
-% contain a letter.
-%
+% A black square is represented by \texttt{!} instead of a letter.
+% We need an \verb+\immediate+ definition to force the expansion
+% so we can test using \verb+\if+. This test cannot be made inside
+% \verb+\putletter+ because that macro may have been redefined
+% when the lights are empty.
% \begin{macrocode}
- \csname\ther@w\thec@l\endcsname
+ \immediate\def\lett@r{\value Letter[\Down,\Across]}
+ \if \lett@r ! \put(\Across,-\Down){\rule{\unitlength}{\unitlength}}
+ \else \putletter \putnumber \putbars
+ \fi
% \end{macrocode}
%
% Now we advance to the next column and iterate. That's the end of the
@@ -1402,18 +1312,23 @@
% \end{macrocode}
%
% Now we can decrement down to the next row and iterate through the
-% rows.
+% rows. In the process, we encounter all the clue numbers in opposite
+% order, therefore the last clue number found should be 1.
%
% \begin{macrocode}
\advance\Down by \m@ne
\repeat
+ \ifthenelse{\equal{\the\oldnumber}1}{}
+ {\ifnumberit\errhelp{Clues should be numbered consecutively
+ from top left to bottom right.}
+ \errmessage{First clue number is \the\oldnumber, not 1} \fi}
% \end{macrocode}
%
% We've so far drawn a horizontal line {\em under\/} each of the rows; the
% next \verb+\put+ draws a final line {\em above\/} the top-most row.
%
% \begin{macrocode}
- \put(1,0){\line(1,0){\the\gr@dsize}}
+ \put(1,0){\line(1,0){\the\gridc@ls}}
% \end{macrocode}
%
% Similarly, a short loop can draw vertical rules at the left-hand edge of
@@ -1424,7 +1339,7 @@
% \begin{macrocode}
\Across=\p@csize
\loop\ifnum\Across>\z@
- \put(\Across,0){\line(0,-1){\the\gr@dsize}}
+ \put(\Across,0){\line(0,-1){\the\gridr@ws}}
\advance\Across by \m@ne
\repeat
% \end{macrocode}
@@ -1440,12 +1355,20 @@
% \end{macro}
%
%
+%
+% \section{A hard crossword with blocks and bars}
+% \begin{crossword}[11]{13}{N}
+% \MakePercentComment \input{grid2} \MakePercentIgnore
+% \end{crossword}
+
+
+% \section{Sample input files}
% Finally, here's the input which produced the crossword in
-% figure~\ref{crossword:1}
+% Figure~\ref{crossword:1}
%
% \begin{verbatim}
% \begin{crossword}{15}{N}
-% \input{grid-1}
+% \input{grid1}
% \end{crossword}
% \end{verbatim}
%
@@ -1574,7 +1497,6 @@
%</exa0>
% \end{macrocode}
%
-%
%
% \begin{macrocode}
%<*exa1>
@@ -1586,7 +1508,7 @@
\begin{document}
\section*{A Sample Crossword}
\textit{(Chamber's Twentieth Century dictionary)}
- \begin{crossword}{15}{?}
+ \begin{crossword}{15}{N}
\input{grid1}
\end{crossword}
\begin{crossword*}{15}{Solution to grid 0}
@@ -1595,8 +1517,80 @@
\end{document}
%</exa1>
% \end{macrocode}
-%
+
%
% \Finale
-%
+% \endinput
+
+
+%<*exa2>
+\documentclass[a4paper]{article}
+\usepackage{a4wide,charter,crosswrd}
+\topmargin -20mm
+\textheight 240mm
+\begin{document}
+ \thispagestyle{empty}
+ \begin{crossword}[11]{13}{N}
+ \input grid2
+ \end{crossword}
+\end{document}
+%</exa2>
+%<*grid2>
+ \unitlength 7mm
+ \let\numbersize\scriptsize
+ \centerline{\large{\textbf{T-shirt design} by Dirk Laurie}}
+ \def\Preamble{5 27, and that goes for 17 11 25 and 24A 10 too,
+I'm sure, so the unclued lights should be entered in red.
+The other lights are all
+in the rather ancient edition of Chambers consulted by the composer.}
+\clue{1}{A}{1}{1}{........}{Murderer's lip in an evil act}{8}
+\clue{6}{A}{9}{1}{.....}{Places where vehicles without
+ resistance get bogged down?}{5}
+\clue{10}{A}{2}{2}{..........}{}{}
+\clue{12}{A}{1}{3}{....}{Perhaps 27 die here}{4}
+\clue{14}{A}{5}{3}{.....}{Obstinate at first and after a smack}{5}
+\clue{15}{A}{10}{3}{....}{Seduced girl, as rumoured}{4}
+\clue{16}{A}{1}{5}{........}{Paid an unspecified amount in Johannesburg}{8}
+\clue{17 \noexpand\& 11D \noexpand\& 25D}{A}{9}{5}{.....}{}{See preamble}
+\clue{18}{A}{1}{6}{......}{Butt gives information in a peeve}{6,hyphenated}
+\clue{20}{A}{8}{6}{......}{Big folk appearing in spots last month}{6}
+\clue{24 \noexpand\& 10}{A}{1}{7}{.....}{}{See preamble}
+\clue{26}{A}{6}{7}{........}{Wince after European has knocked back medicine,
+leaving out some}{8}
+\clue{30}{A}{1}{9}{....}{Recidivist is back, getting old in here}{4}
+\clue{31}{A}{5}{9}{.....}{Unwilling to receive a small copper pot}{5}
+\clue{32}{A}{10}{9}{....}{Primal wilderness beside a person from the East
+ ``is Paradise ---''}{4}
+\clue{33}{A}{3}{10}{..........}{Denizen of Africa to suffer in the heat
+when dose insects get in}{10}
+\clue{34}{A}{1}{11}{.....}{Turn around at home and peek outside, like 18?}{5}
+\clue{35}{A}{6}{11}{........}{Such as these two from the back going
+ ahead in copious lovemaking}{8}
+\clue{1}{D}{1}{1}{......}{A disc full of French horn music}{6}
+\clue{2}{D}{2}{1}{....}{Drams served up in Highland drizzle}{4}
+\clue{3}{D}{4}{1}{......}{A gadfly with well-separated feet etc}{6,two words}
+\clue{4}{D}{5}{1}{......}{Not many shooting up, in fact only one}{6}
+\clue{5 \noexpand\& 27}{D}{7}{1}{.....}{}{See preamble,three words}
+\clue{6}{D}{9}{1}{.....}{Tree that will, having had root extracted
+at first, turn into mineral!}{5}
+\clue{7}{D}{10}{1}{....}{Give me a response that I can hear:
+ it's no longer a crisis}{4}
+\clue{8}{D}{12}{1}{......}{What unreformed head wears is right}{6}
+\clue{9}{D}{13}{1}{.....}{Dirk's parrot, found in polar regions}{5}
+\clue{11}{D}{11}{2}{........}{}{}
+\clue{13}{D}{3}{3}{........}{Saying "Be with you shortly", lassie goes inside
+house}{8}
+\clue{19}{D}{2}{6}{......}{Invest ten rand judiciously}{6}
+\clue{21}{D}{9}{6}{......}{Coin Dirk lost on the way up; Henry gets involved}{6}
+\clue{22}{D}{10}{6}{......}{Peek!}{6}
+\clue{23}{D}{13}{6}{......}{Neutral sounds and trite sayings arise all around Switzerland}{6}
+\clue{24}{D}{1}{7}{.....}{Servants genteel at heart? One of them
+is the butler at Blandings Castle!}
+{5}
+\clue{25}{D}{5}{7}{.....}{}{}
+\clue{27}{D}{7}{7}{.....}{}{}
+\clue{28}{D}{4}{8}{....}{Serving up only half a beer is a mistake}{4}
+\clue{29}{D}{12}{8}{....}{Footplay before strong no-trump not allowed}{4}
+%</grid2>
+%
diff --git a/Master/texmf-dist/source/latex/crosswrd/crosswrd.ins b/Master/texmf-dist/source/latex/crosswrd/crosswrd.ins
index 01993bdf41a..49acbbf1bdb 100644
--- a/Master/texmf-dist/source/latex/crosswrd/crosswrd.ins
+++ b/Master/texmf-dist/source/latex/crosswrd/crosswrd.ins
@@ -1,44 +1,24 @@
-%% crosswrd.ins
-%% Copyright 1989 Brian Hamilton Kelly
-%% updated for LaTeX2e by Frank Mittelbach 96/12/06
-%
-% This work may be distributed and/or modified under the
-% conditions of the LaTeX Project Public License, either version 1.3
-% of this license or (at your option) any later version.
-% The latest version of this license is in
-% http://www.latex-project.org/lppl.txt
-% and version 1.3 or later is part of all distributions of LaTeX
-% version 2005/12/01 or later.
-%
-% This work has the LPPL maintenance status `unmaintained'.
-%
-% This work consists of the files crosswrd.dtx, crosswrd.ins and README
-% and the derived files test0.tex, test1.tex, grid0.tex, grid1.tex and crosswrd.sty.
-%
+
\def\batchfile{crosswrd.ins}
\input docstrip.tex
\preamble
-
-Copyright 1989 Brian Hamilton Kelly
-updated for LaTeX2e by Frank Mittelbach 96/12/06
+Copyright C 1989 Brian Hamilton Kelly
crossword macros for LaTeX
+updated for LaTeX2e by Frank Mittelbach 96/12/06
+substantially extended by Dirk Laurie 08/01/18
for documentation run latex crosswrd.dtx
-This work may be distributed and/or modified under the
-conditions of the LaTeX Project Public License, either version 1.3
-of this license or (at your option) any later version.
-The latest version of this license is in
- http://www.latex-project.org/lppl.txt
-and version 1.3 or later is part of all distributions of LaTeX
-version 2005/12/01 or later.
+distribution consist of
-This work has the LPPL maintenance status `unmaintained'.
+ crosswrd.dtx source
+ crosswrd.ins installation script
+ 00readme
-This work consists of the files crosswrd.dtx, crosswrd.ins and README
-and the derived files test0.tex, test1.tex, grid0.tex, grid1.tex and crosswrd.sty.
+don't distribute this file without distributing the above
+files as well
\endpreamble
@@ -48,6 +28,8 @@ and the derived files test0.tex, test1.tex, grid0.tex, grid1.tex and crosswrd.st
\file{crosswrd.sty}{\from{crosswrd.dtx}{package}}
\file{test0.tex}{\from{crosswrd.dtx}{exa0}}
\file{test1.tex}{\from{crosswrd.dtx}{exa1}}
+ \file{test2.tex}{\from{crosswrd.dtx}{exa2}}
\file{grid0.tex}{\from{crosswrd.dtx}{grid0}}
\file{grid1.tex}{\from{crosswrd.dtx}{grid1}}
+ \file{grid2.tex}{\from{crosswrd.dtx}{grid2}}
}
diff --git a/Master/texmf-dist/tex/latex/crosswrd/crosswrd.sty b/Master/texmf-dist/tex/latex/crosswrd/crosswrd.sty
index 2ce9fec99f9..69c18210116 100644
--- a/Master/texmf-dist/tex/latex/crosswrd/crosswrd.sty
+++ b/Master/texmf-dist/tex/latex/crosswrd/crosswrd.sty
@@ -5,34 +5,36 @@
%% The original source files were:
%%
%% crosswrd.dtx (with options: `package')
-%%
-%% Copyright 1989 Brian Hamilton Kelly
-%% updated for LaTeX2e by Frank Mittelbach 96/12/06
+%% Copyright C 1989 Brian Hamilton Kelly
%%
%% crossword macros for LaTeX
+%% updated for LaTeX2e by Frank Mittelbach 96/12/06
+%% substantially extended by Dirk Laurie 08/01/18
%%
%% for documentation run latex crosswrd.dtx
%%
-%% This work may be distributed and/or modified under the
-%% conditions of the LaTeX Project Public License, either version 1.3
-%% of this license or (at your option) any later version.
-%% The latest version of this license is in
-%% http://www.latex-project.org/lppl.txt
-%% and version 1.3 or later is part of all distributions of LaTeX
-%% version 2005/12/01 or later.
+%% distribution consist of
%%
-%% This work has the LPPL maintenance status `unmaintained'.
+%% crosswrd.dtx source
+%% crosswrd.ins installation script
+%% 00readme
%%
-%% This work consists of the files crosswrd.dtx, crosswrd.ins and README
-%% and the derived files test0.tex, test1.tex, grid0.tex, grid1.tex and crosswrd.sty.
+%% don't distribute this file without distributing the above
+%% files as well
%%
%% crosswrd.dtx
%% Copyright 1989 Brian Hamilton Kelly
%% updated for LaTeX2e by Frank Mittelbach 96/12/06
%% Updated for LPPL 1.3c or later by Clea F. Rees (for Frank Mittelbach), 2008/10/06.
+%%
+%% Upgraded with many new features by Dirk Laurie 2010/02/01
\NeedsTeXFormat{LaTeX2e}[1995/12/01]
+\RequirePackage{ifthen}
\ProvidesPackage{crosswrd}
- [1996/12/06 v2.8b Generating crosswords (BHK)]
+ [2010/02/01 v3.0 Generating crosswords (BHK,DPL)]
+
+
+
\def\ninept{\@setsize\ninept{11pt}\ixpt\@ixpt
\abovedisplayskip 8.5pt plus 3pt minus 4pt
\belowdisplayskip \abovedisplayskip
@@ -43,8 +45,8 @@
\topsep 4pt plus 2pt minus 2pt
}}
\newif\ifnumberit
-\newcount{\gr@dsize}
-\newcount{\p@csize}
+\newcount{\gridr@ws}\newcount{\gridc@ls}
+\newcount{\p@rsize}\newcount{\p@csize}
\newcount{\Down}
\newcount{\Across}
\newwrite\tf@acr
@@ -52,15 +54,15 @@
\def\OpenClueFiles{%
\immediate\openout \tf@acr \jobname.acr\relax
\immediate\openout \tf@dwn \jobname.dwn\relax
- \@writefile{acr}{\begin{minipage}[t]{70mm}}%
+ \@writefile{acr}{\begin{minipage}[t]{\cluewidth}}%
\@writefile{acr}{ \centerline{\textbf{\ACROSStext}}}%
\@writefile{acr}{ \sloppy}%
- \@writefile{acr}{ \ninept}%
+ \@writefile{acr}{ \cluesize}%
\@writefile{acr}{ \begin{ClueList}}%
- \@writefile{dwn}{\begin{minipage}[t]{70mm}}%
+ \@writefile{dwn}{\begin{minipage}[t]{\cluewidth}}%
\@writefile{dwn}{ \centerline{\textbf{\DOWNtext}}}%
\@writefile{dwn}{ \sloppy}%
- \@writefile{dwn}{ \ninept}%
+ \@writefile{dwn}{ \cluesize}%
\@writefile{dwn}{ \begin{ClueList}}}
\newcommand\ACROSStext{ACROSS}
\newcommand\DOWNtext{DOWN}
@@ -87,104 +89,101 @@
\end{tabular}
}\endgraf
}
-\def\crossword#1#2{%
+\newenvironment{crossword}[3][\c@ls]{%
+ \def\c@ls{#2}
\endgraf\leavevmode
\vtop\bgroup
\unitlength 6mm\numberittrue
\def\Header{}%
+ \def\Preamble{}%
+ \def\cluewidth{70mm}
+ \let\numbersize\tiny
+ \let\cluesize\ninept
+ \def\barwidth{0.1}
\OpenClueFiles
- \TestAnswers{#2}%
- \SetUpGrid{#1}}
-\def\endcrossword{\endgraf
+ \TestAnswers{#3}%
+ \SetUpGrid{#1}{\c@ls}}
+{\endgraf
\centerline{\Header}%
\hbox{\FinishGrid}%
+ \ifthenelse {\equal{\Preamble}{}} {}
+ {\centerline{\parbox{\textwidth}{\Preamble}}\medskip}
\CloseClueFiles
\hbox{\PrintClues}%
\egroup
}
-\expandafter\def\csname crossword*\endcsname#1#2{%
+\newenvironment{crossword*}[3][\c@ls]{%
+ \def\c@ls{#2}
\unitlength 4mm\numberitfalse
+ \def\barwidth{0.1}
\endgraf\leavevmode
\vtop\bgroup
- \def\Header{{\bf\strut #2}}%
+ \def\Header{{\bf\strut #3}}%
\def\answer{Y}%
\let\tf@dwn=\relax \let\tf@acr=\relax
- \SetUpGrid{#1}}
-
-\expandafter\def\csname endcrossword*\endcsname{\endgraf
+ \SetUpGrid{#1}{#2}}
+{\endgraf
\centerline{\Header}%
\hbox{\FinishGrid}%
\egroup
}
-\def\laterletter#1{\setsquare{\lettersquare{#1}}}
+\def\ind@x#1#2{R\romannumeral #1C\romannumeral#2}
+\def\arr@yref#1#2#3{\csname #1\ind@x{#2}{#3}\endcsname}
+\def\value#1[#2,#3]{\arr@yref{#1}{#2}{#3}}
+\def\assign#1[#2,#3]=#4;%
+{\expandafter\edef\csname #1\ind@x{#2}{#3}\endcsname{#4}}
+\newcount\accumulat@r
+\def\addto#1[#2,#3]+=#4;%
+{\accumulat@r=\value #1[#2,#3] \advance\accumulat@r by #4
+ \assign #1[#2,#3]=\the\accumulat@r;}
+
+
+
+\newcount\lettercount
+\newcount\Barcode
+
\def\nextletter#1#2{%
\ifx#2\@nil \let\nextlet=\@gobble
- \else\letterput{#2}\advance#1 by \@ne
+ \else \immediate\edef\Before{\value Letter[\Down,\Across]}
+ \assign Letter[\Down,\Across]=#2;
+ \immediate\edef\After{\value Letter[\Down,\Across]}
+ \if \Before ! \else \if \Before \After
+ \else \errhelp{You mistyped an answer, or miscounted the coordinates.}
+ \errmessage{Letter "\After" conflicts with earlier "\Before"
+ in row \the\Down, column \the\Across}
+ \fi \fi
+ \ifnum \lettercount>0 \addto Bar[\Down,\Across]+=-\Barcode; \fi
+ \@gobble{#2} \advance#1 by \@ne \global\advance \lettercount by \@ne
\let\nextlet=\nextletter
- \let\letterput=\laterletter
\fi
\nextlet{#1}}
-\def\blacktest{\blacksquare}
-\newif\ifneed@d
-\newif\ifNoerr
-\Noerrtrue
-\newtoks\Number \newtoks\Plain
-\def\blank#1{\Plain}
-\def\numbered#1#2{\Number}
-\def\letterinsquare#1{#1}
-\def\letterinnumbersquare#1#2{#2}
-\def\setsquare#1{%
- \need@dfalse
- \ifx#1\blacksquare
- \need@dtrue
- \else
- \expandafter\ifx\csname\ther@w\thec@l\endcsname\blacktest
- \need@dtrue
- \else
- \let\lettersquare=\letterinsquare
- \let\numbersquare=\letterinnumbersquare
- \expandafter\if\csname\ther@w\thec@l\endcsname#1
- \else
- \ifNoerr
- \errhelp{Two intersecting lights tried to
- put different letters^^Jin the same square!
- You've probably confused their coordinates.^^J
- Carry on, and examine the printout.}
- \errmessage{Illegal redefinition of square \ther@w\thec@l.
- Was: \expandafter\meaning\csname\ther@w
- \thec@l\endcsname.
- Now: \noexpand #1}
- \Noerrfalse
- \fi
- \fi
- \let\lettersquare=\blank
- \let\numbersquare=\numbered
- \expandafter\ifx#1\Number
- \need@dtrue
- \fi
- \fi
- \fi
- \ifneed@d
- \expandafter\edef\csname\ther@w\thec@l\endcsname{\noexpand #1}
- \fi
-}
\def\clue#1#2#3#4#5#6#7{%
+ \Across=#3 \Down=#4
\findnumber{#1}
+ \immediate\edef\Before{\value Number[\Down,\Across]}
+ \assign Number[\Down,\Across]=\cluenumber;
+ \immediate\edef\After{\value Number[\Down,\Across]}
+ \ifnum \Before>0 \ifnum \After=\Before
+ \else \errhelp
+ {You probably made a mistake when typing in one of the clues.}
+ \errmessage{Number {\After} conflicts with earlier {\Before}
+ in row \the\Down, column \the\Across}
+ \fi \fi
\ifx#2A
- \if\@empty#7\relax\else
+ \global\Barcode=2
+ \ifthenelse{\equal{\@empty}{#7}}{}{
\ifx\tf@acr\relax\else
\@writefile{acr}{ \item[#1] #6 (#7)}%
- \fi
- \fi
+ \fi}
\let\Direction=\Across
\else
\ifx#2D
- \if\@empty#7\relax\else
- \ifx\tf@dwn\relax\else
- \@writefile{dwn}{ \item[#1] #6 (#7)}%
- \fi
- \fi
+ \global\Barcode=1
+ \ifthenelse{\equal{\@empty}{#7}}{}{
+ \ifx\tf@dwn\relax\else
+ \@writefile{dwn}{ \item[#1] #6 (#7)}%
+ \fi}
\let\Direction=\Down
\else
\errhelp{The second parameter of the \string\clue\space
@@ -193,10 +192,7 @@
for \string\clue.}
\fi
\fi
- \Across=#3 \Down=#4
- \edef\letterput##1{\noexpand\setsquare
- {\noexpand\numbersquare
- {\noexpand\cluenumber}{##1}}}%
+ \global\lettercount=0
\nextletter{\Direction}#5\@nil
\ignorespaces
}
@@ -214,77 +210,112 @@
\def\cluenumber{\the\clueNumber}
\def\blackenrow{\let\savediterate\iterate
\loop\relax\ifnum\Across>\z@
- \setsquare{\blacksquare}%
+ \assign Bar[\Down,\Across]=3;
+ \assign Letter[\Down,\Across]=!;
+ \assign Number[\Down,\Across]=0;
\advance\Across by \m@ne
\repeat
\let\iterate\savediterate
}
-\def\SetUpGrid#1{%
- \gr@dsize=#1
- \p@csize=#1 \advance\p@csize by \@ne
- \Down=\gr@dsize
+\def\SetUpGrid#1#2{%
+ \gridr@ws=#1\gridc@ls=#2
+ \p@rsize=#1 \advance\p@rsize by \@ne
+ \p@csize=#2 \advance\p@csize by \@ne
+ \typeout{Grid has #1 rows and #2 columns.}
+ \Down=\gridr@ws
\loop
- \Across=\gr@dsize
+ \Across=\gridc@ls
\ifnum\Down>\z@
\blackenrow
\advance\Down by \m@ne
\repeat
}
-\def\thec@l{C\romannumeral\Across}
-\def\ther@w{R\romannumeral\Down}
\def\f@rst#1#2.{#1}
\def\TestAnswers#1{\edef\next{\def\noexpand\answer{#1}}%
\lowercase\expandafter{\next}%
- \edef\answer{\expandafter \f@rst \answer .}%
+ \edef\answer{\expandafter \f@rst \answer n.}%
\if\answer y \else \if\answer n \else
\typein[\answer]{Make answers visible? [Y/N]: }\fi
\fi
\edef\next{\def\noexpand\answer{\answer}}%
\uppercase\expandafter{\next}%
- \edef\answer{\expandafter \f@rst \answer .}%
+ \edef\answer{\expandafter \f@rst \answer n.}%
}
-\def\letter#1{{\put(\Across,-\Down){\makebox(1,1){\sffamily #1}}}}
-\def\numberedsquare#1#2{%
- \put(\Across,-\Down){%
+\def\putletter{{\put(\Across,-\Down){\makebox(1,1)
+ {\sffamily \value Letter[\Down,\Across]}}}}
+\newcount\oldnumber \oldnumber=0
+\newif\ifseqtest \seqtestfalse
+\def\putnumber{\immediate\def\Number{\value Number[\Down,\Across]}
+ \ifnumberit \ifnum\Number>0
+ \put(\Across,-\Down){%
\begin{picture}(1,1)(0,0)
- \put(0.05,0.05){\makebox(0.9,0.9)[tl]{\tiny #1}}
- \end{picture}%
- }
- \letter{#2}}
-\def\unnumberedsquare#1{\letter}
-\def\FinishGrid{%
- \if\answer Y \else \let \letter=\@gobble \fi
- \ifnumberit
- \let\numbersquare=\numberedsquare
- \else
- \let\numbersquare=\unnumberedsquare
+ \put(0.05,0.05){\makebox(0.9,0.9)[tl]{\numbersize\Number}}
+ \end{picture}}
+ \ifnum \oldnumber>0 \advance\oldnumber by\m@ne
+ \ifnum \oldnumber=\Number {\seqtesttrue} \else
+ \ifseqtest
+ \errhelp{Clues should be numbered consecutively from top left
+ to bottom right.}
+ \errmessage{Found clue number \Number, but expected \the\oldnumber}
+ \seqtestfalse
+ \else\seqtesttrue\fi
+ \fi
\fi
- \let\lettersquare=\letter
- \def\blacksquare{%
- \put(\Across,-\Down){\rule{\unitlength}{\unitlength}}}
- \Down=\gr@dsize
+ \global \oldnumber=\Number
+\fi \fi
+}
+\newcount \pr@vious
+\newcount \c@de
+\def\putbars{ \linethickness{\barwidth\unitlength}
+ \c@de=\value Bar[\Down,\Across]
+ \ifnum \c@de>1 \advance\c@de by -2
+ \ifnum \Across>1
+ \pr@vious=\Across \advance \pr@vious by -1
+ \immediate\def\pr@vlet{\value Letter[\Down,\pr@vious]}
+ \if \pr@vlet ! \else \put(\Across,-\Down){\line(0,1){1}}
+ \fi \fi \fi
+ \ifnum \c@de>0
+ \ifnum \Down>1
+ \pr@vious=\Down \advance \pr@vious by -1
+ \immediate\def\pr@vlet{\value Letter[\pr@vious,\Across]}
+ \if \pr@vlet ! \else \put(\Across,-\pr@vious){\line(1,0){1}}
+ \fi \fi \fi
+}
+\def\FinishGrid{%
+ \if\answer Y \else \let\putletter\relax \fi
+ \Down=\gridr@ws
\centerline{%
- \begin{picture}(\p@csize,\p@csize)(1,-\p@csize)
+ \begin{picture}(\p@csize,\p@rsize)(1,-\p@rsize)
\loop\ifnum\Down>\z@
- \put(1,-\Down){\line(1,0){\the\gr@dsize}}
- \Across=\gr@dsize
+ \put(1,-\Down){\line(1,0){\the\gridc@ls}}
+ \Across=\gridc@ls
{\loop \ifnum\Across>\z@
- \csname\ther@w\thec@l\endcsname
+ \immediate\def\lett@r{\value Letter[\Down,\Across]}
+ \if \lett@r ! \put(\Across,-\Down){\rule{\unitlength}{\unitlength}}
+ \else \putletter \putnumber \putbars
+ \fi
\advance\Across by \m@ne
\repeat
}%
\advance\Down by \m@ne
\repeat
- \put(1,0){\line(1,0){\the\gr@dsize}}
+ \ifthenelse{\equal{\the\oldnumber}1}{}
+ {\ifnumberit\errhelp{Clues should be numbered consecutively
+ from top left to bottom right.}
+ \errmessage{First clue number is \the\oldnumber, not 1} \fi}
+ \put(1,0){\line(1,0){\the\gridc@ls}}
\Across=\p@csize
\loop\ifnum\Across>\z@
- \put(\Across,0){\line(0,-1){\the\gr@dsize}}
+ \put(\Across,0){\line(0,-1){\the\gridr@ws}}
\advance\Across by \m@ne
\repeat
\end{picture}%
}%
}
+
+
+
\endinput
%%
%% End of file `crosswrd.sty'.