padcount (5may18)

git-svn-id: svn://tug.org/texlive/trunk@47621 c570f23f-e606-0410-a88d-b1316a301751

10 files changed, 769 insertions, 1 deletions

diff --git a/Master/texmf-dist/doc/latex/padcount/CHANGES b/Master/texmf-dist/doc/latex/padcount/CHANGES
new file mode 100644
index 00000000000..b0c0514b9cc
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/padcount/CHANGES
@@ -0,0 +1 @@
+4 May 1202 (4 May 2018):  Initial release.
diff --git a/Master/texmf-dist/doc/latex/padcount/README b/Master/texmf-dist/doc/latex/padcount/README
new file mode 100644
index 00000000000..3e5efa59c92
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/padcount/README
@@ -0,0 +1,26 @@
++AMDG
+
+This document is copyright 2018 by Donald P. Goodman, and is
+released publicly under the LaTeX Project Public License.  The
+distribution and modification of this work is constrained by the
+conditions of that license.  See
+	http://www.latex-project.org/lppl.txt
+for the text of the license.  This document is released
+under version 1.3c of that license, and this work may be distributed
+or modified under the terms of that license or, at your option, any
+later version.
+
+This work has the LPPL maintenance status 'maintained'.
+
+The Current Maintainer of this work is Donald P. Goodman
+(dgoodmaniii@gmail.com).
+
+This work consists of the files padcount.ins and
+padcount.dtx, along with derived files padcount.sty and
+padcount.pdf.
+
+The padcount package provides plain-TeX-compatible commands
+for padding counters with arbitary characters.
+
+This package should run properly on any properly running TeX
+or LaTeX system.
diff --git a/Master/texmf-dist/doc/latex/padcount/lppl.txt b/Master/texmf-dist/doc/latex/padcount/lppl.txt
new file mode 100644
index 00000000000..22443139013
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/padcount/lppl.txt
@@ -0,0 +1,416 @@
+The LaTeX Project Public License
+=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
+
+LPPL Version 1.3c  2008-05-04
+
+Copyright 1999 2002-2008 LaTeX3 Project
+    Everyone is allowed to distribute verbatim copies of this
+    license document, but modification of it is not allowed.
+
+
+PREAMBLE
+========
+
+The LaTeX Project Public License (LPPL) is the primary license under
+which the LaTeX kernel and the base LaTeX packages are distributed.
+
+You may use this license for any work of which you hold the copyright
+and which you wish to distribute.  This license may be particularly
+suitable if your work is TeX-related (such as a LaTeX package), but 
+it is written in such a way that you can use it even if your work is 
+unrelated to TeX.
+
+The section `WHETHER AND HOW TO DISTRIBUTE WORKS UNDER THIS LICENSE',
+below, gives instructions, examples, and recommendations for authors
+who are considering distributing their works under this license.
+
+This license gives conditions under which a work may be distributed
+and modified, as well as conditions under which modified versions of
+that work may be distributed.
+
+We, the LaTeX3 Project, believe that the conditions below give you
+the freedom to make and distribute modified versions of your work
+that conform with whatever technical specifications you wish while
+maintaining the availability, integrity, and reliability of
+that work.  If you do not see how to achieve your goal while
+meeting these conditions, then read the document `cfgguide.tex'
+and `modguide.tex' in the base LaTeX distribution for suggestions.
+
+
+DEFINITIONS
+===========
+
+In this license document the following terms are used:
+
+   `Work'
+    Any work being distributed under this License.
+    
+   `Derived Work'
+    Any work that under any applicable law is derived from the Work.
+
+   `Modification' 
+    Any procedure that produces a Derived Work under any applicable
+    law -- for example, the production of a file containing an
+    original file associated with the Work or a significant portion of
+    such a file, either verbatim or with modifications and/or
+    translated into another language.
+
+   `Modify'
+    To apply any procedure that produces a Derived Work under any
+    applicable law.
+    
+   `Distribution'
+    Making copies of the Work available from one person to another, in
+    whole or in part.  Distribution includes (but is not limited to)
+    making any electronic components of the Work accessible by
+    file transfer protocols such as FTP or HTTP or by shared file
+    systems such as Sun's Network File System (NFS).
+
+   `Compiled Work'
+    A version of the Work that has been processed into a form where it
+    is directly usable on a computer system.  This processing may
+    include using installation facilities provided by the Work,
+    transformations of the Work, copying of components of the Work, or
+    other activities.  Note that modification of any installation
+    facilities provided by the Work constitutes modification of the Work.
+
+   `Current Maintainer'
+    A person or persons nominated as such within the Work.  If there is
+    no such explicit nomination then it is the `Copyright Holder' under
+    any applicable law.
+
+   `Base Interpreter' 
+    A program or process that is normally needed for running or
+    interpreting a part or the whole of the Work.    
+
+    A Base Interpreter may depend on external components but these
+    are not considered part of the Base Interpreter provided that each
+    external component clearly identifies itself whenever it is used
+    interactively.  Unless explicitly specified when applying the
+    license to the Work, the only applicable Base Interpreter is a
+    `LaTeX-Format' or in the case of files belonging to the 
+    `LaTeX-format' a program implementing the `TeX language'.
+
+
+
+CONDITIONS ON DISTRIBUTION AND MODIFICATION
+===========================================
+
+1.  Activities other than distribution and/or modification of the Work
+are not covered by this license; they are outside its scope.  In
+particular, the act of running the Work is not restricted and no
+requirements are made concerning any offers of support for the Work.
+
+2.  You may distribute a complete, unmodified copy of the Work as you
+received it.  Distribution of only part of the Work is considered
+modification of the Work, and no right to distribute such a Derived
+Work may be assumed under the terms of this clause.
+
+3.  You may distribute a Compiled Work that has been generated from a
+complete, unmodified copy of the Work as distributed under Clause 2
+above, as long as that Compiled Work is distributed in such a way that
+the recipients may install the Compiled Work on their system exactly
+as it would have been installed if they generated a Compiled Work
+directly from the Work.
+
+4.  If you are the Current Maintainer of the Work, you may, without
+restriction, modify the Work, thus creating a Derived Work.  You may
+also distribute the Derived Work without restriction, including
+Compiled Works generated from the Derived Work.  Derived Works
+distributed in this manner by the Current Maintainer are considered to
+be updated versions of the Work.
+
+5.  If you are not the Current Maintainer of the Work, you may modify
+your copy of the Work, thus creating a Derived Work based on the Work,
+and compile this Derived Work, thus creating a Compiled Work based on
+the Derived Work.
+
+6.  If you are not the Current Maintainer of the Work, you may
+distribute a Derived Work provided the following conditions are met
+for every component of the Work unless that component clearly states
+in the copyright notice that it is exempt from that condition.  Only
+the Current Maintainer is allowed to add such statements of exemption 
+to a component of the Work. 
+
+  a. If a component of this Derived Work can be a direct replacement
+     for a component of the Work when that component is used with the
+     Base Interpreter, then, wherever this component of the Work
+     identifies itself to the user when used interactively with that
+     Base Interpreter, the replacement component of this Derived Work
+     clearly and unambiguously identifies itself as a modified version
+     of this component to the user when used interactively with that
+     Base Interpreter.
+     
+  b. Every component of the Derived Work contains prominent notices
+     detailing the nature of the changes to that component, or a
+     prominent reference to another file that is distributed as part
+     of the Derived Work and that contains a complete and accurate log
+     of the changes.
+  
+  c. No information in the Derived Work implies that any persons,
+     including (but not limited to) the authors of the original version
+     of the Work, provide any support, including (but not limited to)
+     the reporting and handling of errors, to recipients of the
+     Derived Work unless those persons have stated explicitly that
+     they do provide such support for the Derived Work.
+
+  d. You distribute at least one of the following with the Derived Work:
+
+       1. A complete, unmodified copy of the Work; 
+          if your distribution of a modified component is made by
+          offering access to copy the modified component from a
+          designated place, then offering equivalent access to copy
+          the Work from the same or some similar place meets this
+          condition, even though third parties are not compelled to
+          copy the Work along with the modified component;
+
+       2. Information that is sufficient to obtain a complete,
+          unmodified copy of the Work.
+
+7.  If you are not the Current Maintainer of the Work, you may
+distribute a Compiled Work generated from a Derived Work, as long as
+the Derived Work is distributed to all recipients of the Compiled
+Work, and as long as the conditions of Clause 6, above, are met with
+regard to the Derived Work.
+
+8.  The conditions above are not intended to prohibit, and hence do not
+apply to, the modification, by any method, of any component so that it
+becomes identical to an updated version of that component of the Work as
+it is distributed by the Current Maintainer under Clause 4, above.
+
+9.  Distribution of the Work or any Derived Work in an alternative
+format, where the Work or that Derived Work (in whole or in part) is
+then produced by applying some process to that format, does not relax or
+nullify any sections of this license as they pertain to the results of
+applying that process.
+     
+10. a. A Derived Work may be distributed under a different license
+       provided that license itself honors the conditions listed in
+       Clause 6 above, in regard to the Work, though it does not have
+       to honor the rest of the conditions in this license.
+      
+    b. If a Derived Work is distributed under a different license, that
+       Derived Work must provide sufficient documentation as part of
+       itself to allow each recipient of that Derived Work to honor the 
+       restrictions in Clause 6 above, concerning changes from the Work.
+
+11. This license places no restrictions on works that are unrelated to
+the Work, nor does this license place any restrictions on aggregating
+such works with the Work by any means.
+
+12.  Nothing in this license is intended to, or may be used to, prevent
+complete compliance by all parties with all applicable laws.
+
+
+NO WARRANTY
+===========
+
+There is no warranty for the Work.  Except when otherwise stated in
+writing, the Copyright Holder provides the Work `as is', without
+warranty of any kind, either expressed or implied, including, but not
+limited to, the implied warranties of merchantability and fitness for a
+particular purpose.  The entire risk as to the quality and performance
+of the Work is with you.  Should the Work prove defective, you assume
+the cost of all necessary servicing, repair, or correction.
+
+In no event unless required by applicable law or agreed to in writing
+will The Copyright Holder, or any author named in the components of the
+Work, or any other party who may distribute and/or modify the Work as
+permitted above, be liable to you for damages, including any general,
+special, incidental or consequential damages arising out of any use of
+the Work or out of inability to use the Work (including, but not limited
+to, loss of data, data being rendered inaccurate, or losses sustained by
+anyone as a result of any failure of the Work to operate with any other
+programs), even if the Copyright Holder or said author or said other
+party has been advised of the possibility of such damages.
+
+
+MAINTENANCE OF THE WORK
+=======================
+
+The Work has the status `author-maintained' if the Copyright Holder
+explicitly and prominently states near the primary copyright notice in
+the Work that the Work can only be maintained by the Copyright Holder
+or simply that it is `author-maintained'.
+
+The Work has the status `maintained' if there is a Current Maintainer
+who has indicated in the Work that they are willing to receive error
+reports for the Work (for example, by supplying a valid e-mail
+address). It is not required for the Current Maintainer to acknowledge
+or act upon these error reports.
+
+The Work changes from status `maintained' to `unmaintained' if there
+is no Current Maintainer, or the person stated to be Current
+Maintainer of the work cannot be reached through the indicated means
+of communication for a period of six months, and there are no other
+significant signs of active maintenance.
+
+You can become the Current Maintainer of the Work by agreement with
+any existing Current Maintainer to take over this role.
+
+If the Work is unmaintained, you can become the Current Maintainer of
+the Work through the following steps:
+
+ 1.  Make a reasonable attempt to trace the Current Maintainer (and
+     the Copyright Holder, if the two differ) through the means of
+     an Internet or similar search.
+
+ 2.  If this search is successful, then enquire whether the Work
+     is still maintained.
+
+  a. If it is being maintained, then ask the Current Maintainer
+     to update their communication data within one month.
+     
+  b. If the search is unsuccessful or no action to resume active
+     maintenance is taken by the Current Maintainer, then announce
+     within the pertinent community your intention to take over
+     maintenance.  (If the Work is a LaTeX work, this could be
+     done, for example, by posting to comp.text.tex.)
+
+ 3a. If the Current Maintainer is reachable and agrees to pass
+     maintenance of the Work to you, then this takes effect
+     immediately upon announcement.
+     
+  b. If the Current Maintainer is not reachable and the Copyright
+     Holder agrees that maintenance of the Work be passed to you,
+     then this takes effect immediately upon announcement.  
+    
+ 4.  If you make an `intention announcement' as described in 2b. above
+     and after three months your intention is challenged neither by
+     the Current Maintainer nor by the Copyright Holder nor by other
+     people, then you may arrange for the Work to be changed so as
+     to name you as the (new) Current Maintainer.
+     
+ 5.  If the previously unreachable Current Maintainer becomes
+     reachable once more within three months of a change completed
+     under the terms of 3b) or 4), then that Current Maintainer must
+     become or remain the Current Maintainer upon request provided
+     they then update their communication data within one month.
+
+A change in the Current Maintainer does not, of itself, alter the fact
+that the Work is distributed under the LPPL license.
+
+If you become the Current Maintainer of the Work, you should
+immediately provide, within the Work, a prominent and unambiguous
+statement of your status as Current Maintainer.  You should also
+announce your new status to the same pertinent community as
+in 2b) above.
+
+
+WHETHER AND HOW TO DISTRIBUTE WORKS UNDER THIS LICENSE
+======================================================
+
+This section contains important instructions, examples, and
+recommendations for authors who are considering distributing their
+works under this license.  These authors are addressed as `you' in
+this section.
+
+Choosing This License or Another License
+----------------------------------------
+
+If for any part of your work you want or need to use *distribution*
+conditions that differ significantly from those in this license, then
+do not refer to this license anywhere in your work but, instead,
+distribute your work under a different license.  You may use the text
+of this license as a model for your own license, but your license
+should not refer to the LPPL or otherwise give the impression that
+your work is distributed under the LPPL.
+
+The document `modguide.tex' in the base LaTeX distribution explains
+the motivation behind the conditions of this license.  It explains,
+for example, why distributing LaTeX under the GNU General Public
+License (GPL) was considered inappropriate.  Even if your work is
+unrelated to LaTeX, the discussion in `modguide.tex' may still be
+relevant, and authors intending to distribute their works under any
+license are encouraged to read it.
+
+A Recommendation on Modification Without Distribution
+-----------------------------------------------------
+
+It is wise never to modify a component of the Work, even for your own
+personal use, without also meeting the above conditions for
+distributing the modified component.  While you might intend that such
+modifications will never be distributed, often this will happen by
+accident -- you may forget that you have modified that component; or
+it may not occur to you when allowing others to access the modified
+version that you are thus distributing it and violating the conditions
+of this license in ways that could have legal implications and, worse,
+cause problems for the community.  It is therefore usually in your
+best interest to keep your copy of the Work identical with the public
+one.  Many works provide ways to control the behavior of that work
+without altering any of its licensed components.
+
+How to Use This License
+-----------------------
+
+To use this license, place in each of the components of your work both
+an explicit copyright notice including your name and the year the work
+was authored and/or last substantially modified.  Include also a
+statement that the distribution and/or modification of that
+component is constrained by the conditions in this license.
+
+Here is an example of such a notice and statement:
+
+  %% pig.dtx
+  %% Copyright 2005 M. Y. Name
+  %
+  % This work may be distributed and/or modified under the
+  % conditions of the LaTeX Project Public License, either version 1.3
+  % of this license or (at your option) any later version.
+  % The latest version of this license is in
+  %   http://www.latex-project.org/lppl.txt
+  % and version 1.3 or later is part of all distributions of LaTeX
+  % version 2005/12/01 or later.
+  %
+  % This work has the LPPL maintenance status `maintained'.
+  % 
+  % The Current Maintainer of this work is M. Y. Name.
+  %
+  % This work consists of the files pig.dtx and pig.ins
+  % and the derived file pig.sty.
+
+Given such a notice and statement in a file, the conditions
+given in this license document would apply, with the `Work' referring
+to the three files `pig.dtx', `pig.ins', and `pig.sty' (the last being
+generated from `pig.dtx' using `pig.ins'), the `Base Interpreter'
+referring to any `LaTeX-Format', and both `Copyright Holder' and
+`Current Maintainer' referring to the person `M. Y. Name'.
+
+If you do not want the Maintenance section of LPPL to apply to your
+Work, change `maintained' above into `author-maintained'.  
+However, we recommend that you use `maintained', as the Maintenance
+section was added in order to ensure that your Work remains useful to
+the community even when you can no longer maintain and support it
+yourself.
+
+Derived Works That Are Not Replacements
+---------------------------------------
+
+Several clauses of the LPPL specify means to provide reliability and
+stability for the user community. They therefore concern themselves
+with the case that a Derived Work is intended to be used as a
+(compatible or incompatible) replacement of the original Work. If
+this is not the case (e.g., if a few lines of code are reused for a
+completely different task), then clauses 6b and 6d shall not apply.
+
+
+Important Recommendations
+-------------------------
+
+ Defining What Constitutes the Work
+
+   The LPPL requires that distributions of the Work contain all the
+   files of the Work.  It is therefore important that you provide a
+   way for the licensee to determine which files constitute the Work.
+   This could, for example, be achieved by explicitly listing all the
+   files of the Work near the copyright notice of each file or by
+   using a line such as:
+
+    % This work consists of all files listed in manifest.txt.
+   
+   in that place.  In the absence of an unequivocal list it might be
+   impossible for the licensee to determine what is considered by you
+   to comprise the Work and, in such a case, the licensee would be
+   entitled to make reasonable conjectures as to which files comprise
+   the Work.
+
diff --git a/Master/texmf-dist/doc/latex/padcount/padcount.pdf b/Master/texmf-dist/doc/latex/padcount/padcount.pdf
new file mode 100644
index 00000000000..c28c07b28be
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/padcount/padcount.pdf
diff --git a/Master/texmf-dist/source/latex/padcount/padcount.dtx b/Master/texmf-dist/source/latex/padcount/padcount.dtx
new file mode 100644
index 00000000000..7da1eff746a
--- /dev/null
+++ b/Master/texmf-dist/source/latex/padcount/padcount.dtx
@@ -0,0 +1,190 @@
+% \iffalse
+% +AMDG  This document was begun on 1 May 1202, the
+% feast of St. Joseph the Worker, and it
+% is humbly dedicated to him and to the Immaculate Heart of
+% Mary for their prayers, and to the Sacred Heart of Jesus 
+% for His mercy.
+%
+% This document is copyright 2018 by Donald P. Goodman, and is
+% released publicly under the LaTeX Project Public License.  The
+% distribution and modification of this work is constrained by the
+% conditions of that license.  See
+% 	http://www.latex-project.org/lppl.txt
+% for the text of the license.  This document is released
+% under version 1.3c of that license, and this work may be distributed
+% or modified under the terms of that license or, at your option, any
+% later version.
+% 
+% This work has the LPPL maintenance status 'maintained'.
+% 
+% The Current Maintainer of this work is Donald P. Goodman
+% (dgoodmaniii@gmail.com).
+% 
+% This work consists of padcount.dtx, padcount.ins, and
+% derived files padcount.sty and padcount.pdf.
+% \fi
+
+% \iffalse
+%<package>\NeedsTeXFormat{LaTeX2e}[1999/12/01]
+%<package>\ProvidesPackage{padcount}[2018/05/04 v1.0 Pad numbers with arbitrary characters]
+%<*driver>
+\documentclass{ltxdoc}
+
+\usepackage{doc}
+\usepackage{padcount}
+\usepackage{fancyvrb}
+\usepackage{fvrb-ex}
+\usepackage{booktabs}
+
+\begin{document}
+\DocInput{padcount.dtx}
+\end{document}
+%</driver> \fi
+%
+% \title{The |padcount| Package, v1.0}
+% \author{Donald P.\ Goodman III}
+% \date{\today}
+%
+% \maketitle
+%
+% \begin{abstract}
+% \noindent
+% Sometimes a plain number is fine; other times, you want it
+% \emph{padded}, either with zeroes or some other character.
+% This small package makes it easy to do that.  It works not
+% only on 
+% arabic numerals, but on any expanded list of tokens passed
+% to it.  This makes it suitable for, among other things,
+% counters of all kinds.
+% \end{abstract}
+%
+% \section{Usage}
+%
+% About as simply as possible, the package centers on the
+% \DescribeMacro{\padnum}|\padnum| macro, which is defined
+% as follows:
+%
+% \begin{quote}
+% \cmd{\padnum} \marg{stuff}
+% \end{quote}
+%
+% The argument can be anything that \TeX\ will recognize as
+% a list of tokens, though it's anticipated that it'll be
+% used mostly for numbers.  By default,
+% |padcount| pads to two digits, and it does that
+% padding with the character |0|.
+%
+% The examples in this document assume the existence of a
+% \TeX\ count register |\tmp| (created by |\newcount\tmp|)
+% and a \LaTeX\ counter |temp| (created by
+% |\newcounter{temp}|).
+%
+% \newcount\tmp
+% \newcounter{temp}
+% \begin{center}\tabcolsep=0pt
+% \begin{tabular}{p{2in}lp{0.4in}p{2in}l}
+% |\padnum{4}| & \padnum{4} & {} & |\padnum{47}| & \padnum{47} \\
+% |\tmp=8\padnum{\the\tmp}| & \tmp=8\padnum{\the\tmp} & {} &
+%		|\tmp=16\padnum{\the\tmp}| & \tmp=16\padnum{\the\tmp} \\
+% |\setcounter{temp}{8}| |\padnum{\thetemp}| &
+%		\setcounter{temp}{8}\padnum{\thetemp} & {} &
+%		|\setcounter{temp}{16}| |\padnum{\thetemp}| &
+%		\setcounter{temp}{16}\padnum{\thetemp} \\
+% \end{tabular}
+% \end{center}
+%
+% You can change the number of digits you'd like to pad to
+% with the macro \DescribeMacro{\setpadnum}|\setpadnum|,
+% which takes a single integer as its argument.  By default,
+% this is |2|; but any integer whatsoever will work.
+%
+% \begin{center}\tabcolsep=0pt
+% \begin{tabular}{p{2in}r}
+% |\setpadnum{4}\padnum{4}| & \setpadnum{4}\padnum{4} \\
+% |\setpadnum{8}\padnum{42424}| & \setpadnum{8}\padnum{42424} \\
+% \end{tabular}
+% \end{center}
+%
+% You can set the character that will be used for padding
+% with \DescribeMacro{\setpadchar}|\setpadchar|.  In fact,
+% this need not be a character; it can be any expansible set
+% of tokens.
+%
+% \begin{center}\tabcolsep=0pt
+% \begin{tabular}{p{3.65in}r}
+% |\setpadnum{4}\setpadchar{*}=\padnum{4}=| &
+%		\setpadnum{4}\setpadchar{*}=\padnum{4}= \\
+% |\setpadnum{4}\setpadchar{\hskip1.2ex}=\padnum{4}=| &
+%		\setpadnum{4}\setpadchar{\hskip1.2ex}=\padnum{4}= \\
+% |\setpadnum{4}\setpadchar{*}=\padnum{\roman{temp}}=| &
+%		\setpadnum{4}\setpadchar{*}=\padnum{\roman{temp}}= \\
+% \end{tabular}
+% \end{center}
+%
+% That last example, incidentally, also demonstrates that we
+% can send a counter in any format, without regard to base,
+% and |padcount| will do its job.
+%
+% And that's it; just a small utility package.  Hope it's
+% useful in some way.
+%
+% \section{Implementation}
+%
+% We start with the macros to count characters, which we've
+% gently adapted from those of David Carlisle's answer on
+% \url{tex.stackexchange.com}, question 57598.
+%    \begin{macrocode}
+\newcount\pad@charcount%
+\def\pad@expandloop#1{%
+	\pad@xloop#1\relax
+}
+\def\pad@xloop#1{%
+	\ifx\relax#1%
+	\else%
+		\advance\pad@charcount by1%
+	\expandafter\pad@xloop%
+	\fi%
+}%
+\def\pad@countchar#1{%
+	\pad@charcount=0%
+	\expandafter\expandafter\pad@expandloop{#1}%
+}%
+%    \end{macrocode}
+% Now, we can set the defaults.  Set the padding level to
+% two characters and the padding character to |0|.  Also
+% define some throwaway counters for loops and
+% value-holding.
+%    \begin{macrocode}
+\newcount\pad@tmp%
+\newcount\pad@tmpi%
+\newcount\pad@num\pad@num=2%
+\def\pad@char{0}%
+%    \end{macrocode}
+% Now, the money:  count the characters, determine how many
+% new characters we need to print, then loop the appropriate
+% number of times to print them.
+%    \begin{macrocode}
+\def\padnum#1{%
+	\edef\pad@yy{#1}%
+	\expandafter\pad@countchar{\pad@yy}%
+	\pad@tmp=\pad@charcount%
+	\multiply\pad@tmp by-1%
+	\advance\pad@tmp by\pad@num%
+	\pad@tmpi=0%
+	\ifnum\pad@tmp>0%
+		\loop%
+			\ifnum\pad@tmpi<\pad@tmp%
+				\pad@char%
+				\advance\pad@tmpi by1%
+		\repeat%
+	\fi%
+	\leavevmode#1%
+}%
+%    \end{macrocode}
+% Lastly, some macros to reset the internal values used by
+% |\padnum|.
+%    \begin{macrocode}
+\def\setpadnum#1{\pad@num=#1}%
+\def\setpadchar#1{\def\pad@char{#1}}%
+%    \end{macrocode}
+% Happy \TeX{}ing!
diff --git a/Master/texmf-dist/source/latex/padcount/padcount.ins b/Master/texmf-dist/source/latex/padcount/padcount.ins
new file mode 100644
index 00000000000..e6081d84f95
--- /dev/null
+++ b/Master/texmf-dist/source/latex/padcount/padcount.ins
@@ -0,0 +1,65 @@
+% +AMDG
+% This document was begun on 12 Apr 1202, the feast of St.
+% Justin Martyr, and it is humbly dedicated to him and to
+% the Immaculate Heart of Mary, for their prayers, and to
+% the Sacred Heart of Jesus, for His mercy.
+%
+% This document is copyright 2018 by Donald P. Goodman, and is
+% released publicly under the LaTeX Project Public License.  The
+% distribution and modification of this work is constrained by the
+% conditions of that license.  See
+% 	http://www.latex-project.org/lppl.txt
+% for the text of the license.  This document is released
+% under version 1.3c of that license, and this work may be distributed
+% or modified under the terms of that license or, at your option, any
+% later version.
+% 
+% This work has the LPPL maintenance status 'maintained'.
+% 
+% The Current Maintainer of this work is Donald P. Goodman
+% (dgoodmaniii@gmail.com).
+% 
+% This work consists of padcount.dtx, padcount.ins, and
+% derived files padcount.sty and padcount.pdf.
+
+\input docstrip.tex
+
+\preamble
+This is a generated file.
+
+This document is copyright 2018 by Donald P. Goodman, and is
+released publicly under the LaTeX Project Public License.  The
+distribution and modification of this work is constrained by the
+conditions of that license.  See
+	http://www.latex-project.org/lppl.txt
+for the text of the license.  This document is released
+under version 1.3c of that license, and this work may be distributed
+or modified under the terms of that license or, at your option, any
+later version.
+
+This work has the LPPL maintenance status 'maintained'.
+
+The Current Maintainer of this work is Donald P. Goodman
+(dgoodmaniii@gmail.com).
+
+This work consists of padcount.dtx, padcount.ins, and
+derived files padcount.sty and padcount.pdf.
+\endpreamble
+
+\keepsilent
+\generate{\file{padcount.sty}{\from{padcount.dtx}{package}}}
+
+\Msg{******************************************************}
+\Msg{*}
+\Msg{* To finish the installation you have to move the}
+\Msg{* following file into a directory searched by TeX:}
+\Msg{*}
+\Msg{* \space\space padcount.sty}
+\Msg{*}
+\Msg{* To produce the documentation run the file padcount.dtx}
+\Msg{* through LaTeX.}
+\Msg{*}
+\Msg{* Happy TeXing!}
+\Msg{******************************************************}
+
+\endbatchfile
diff --git a/Master/texmf-dist/tex/latex/padcount/padcount.sty b/Master/texmf-dist/tex/latex/padcount/padcount.sty
new file mode 100644
index 00000000000..48e7aa28495
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/padcount/padcount.sty
@@ -0,0 +1,69 @@
+%%
+%% This is file `padcount.sty',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% padcount.dtx  (with options: `package')
+%% This is a generated file.
+%% 
+%% This document is copyright 2018 by Donald P. Goodman, and is
+%% released publicly under the LaTeX Project Public License.  The
+%% distribution and modification of this work is constrained by the
+%% conditions of that license.  See
+%% http://www.latex-project.org/lppl.txt
+%% for the text of the license.  This document is released
+%% under version 1.3c of that license, and this work may be distributed
+%% or modified under the terms of that license or, at your option, any
+%% later version.
+%% 
+%% This work has the LPPL maintenance status 'maintained'.
+%% 
+%% The Current Maintainer of this work is Donald P. Goodman
+%% (dgoodmaniii@gmail.com).
+%% 
+%% This work consists of padcount.dtx, padcount.ins, and
+%% derived files padcount.sty and padcount.pdf.
+
+\NeedsTeXFormat{LaTeX2e}[1999/12/01]
+\ProvidesPackage{padcount}[2018/05/04 v1.0 Pad numbers with arbitrary characters]
+\newcount\pad@charcount%
+\def\pad@expandloop#1{%
+\pad@xloop#1\relax
+}
+\def\pad@xloop#1{%
+\ifx\relax#1%
+\else%
+\advance\pad@charcount by1%
+\expandafter\pad@xloop%
+\fi%
+}%
+\def\pad@countchar#1{%
+\pad@charcount=0%
+\expandafter\expandafter\pad@expandloop{#1}%
+}%
+\newcount\pad@tmp%
+\newcount\pad@tmpi%
+\newcount\pad@num\pad@num=2%
+\def\pad@char{0}%
+\def\padnum#1{%
+\edef\pad@yy{#1}%
+\expandafter\pad@countchar{\pad@yy}%
+\pad@tmp=\pad@charcount%
+\multiply\pad@tmp by-1%
+\advance\pad@tmp by\pad@num%
+\pad@tmpi=0%
+\ifnum\pad@tmp>0%
+\loop%
+\ifnum\pad@tmpi<\pad@tmp%
+\pad@char%
+\advance\pad@tmpi by1%
+\repeat%
+\fi%
+\leavevmode#1%
+}%
+\def\setpadnum#1{\pad@num=#1}%
+\def\setpadchar#1{\def\pad@char{#1}}%
+\endinput
+%%
+%% End of file `padcount.sty'.
diff --git a/Master/tlpkg/bin/tlpkg-ctan-check b/Master/tlpkg/bin/tlpkg-ctan-check
index 5246474e17f..cdac113af90 100755
--- a/Master/tlpkg/bin/tlpkg-ctan-check
+++ b/Master/tlpkg/bin/tlpkg-ctan-check
@@ -476,7 +476,7 @@ my @TLP_working = qw(
     opteng optidef optional options
     ordinalpt orkhun oscola ot-tableau othello othelloboard
     oubraces outline outliner outlines outlining overlays overlock overpic
-  pacioli padauk pagecolor pagecont pagenote pagerange pageslts
+  pacioli padauk pagecolor pagecont padcount pagenote pagerange pageslts
     paper papercdcase papermas papertex
     paracol parades paralist parallel paratype
     paresse parnotes parrun parselines parskip
diff --git a/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc b/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc
index b11850b4da9..74151bce5de 100644
--- a/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc
+++ b/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc
@@ -794,6 +794,7 @@ depend outlines
 depend outlining
 depend overlays
 depend overpic
+depend padcount
 depend pagecolor
 depend pagecont
 depend pagenote
diff --git a/Master/tlpkg/tlpsrc/padcount.tlpsrc b/Master/tlpkg/tlpsrc/padcount.tlpsrc
new file mode 100644
index 00000000000..e69de29bb2d
--- /dev/null
+++ b/Master/tlpkg/tlpsrc/padcount.tlpsrc