rm files now in own pkgs

git-svn-id: svn://tug.org/texlive/trunk@18301 c570f23f-e606-0410-a88d-b1316a301751

4 files changed, 0 insertions, 1126 deletions

diff --git a/Master/texmf-dist/doc/latex/seminar/2up.doc b/Master/texmf-dist/doc/latex/seminar/2up.doc
deleted file mode 100644
index 082efec0201..00000000000
--- a/Master/texmf-dist/doc/latex/seminar/2up.doc
+++ /dev/null
@@ -1,549 +0,0 @@
-%% BEGIN 2up.doc
-%%
-%% Documentation for 2up.tex/2up.sty.
-%% Run through LaTeX, with or without the NFSS.
-%%
-%% See below if you want to try out two-up printing.
-%%
-%% LaTeX version of this documentation courtesy of
-%%    H. David Todd <hdtodd@mockingbird.wesleyan.edu>
-%%
-%% This file may be distributed and/or modified under the conditions of
-%% the LaTeX Project Public License, either version 1.2 of this license
-%% or (at your option) any later version.  The latest version of this
-%% license is in:
-%% 
-%%    http://www.latex-project.org/lppl.txt
-%% 
-%% and version 1.2 or later is part of all distributions of LaTeX version
-%% 1999/12/01 or later.
-%%
-%%
-\documentstyle[12pt,twoside]{article}
-
-\def\FileDate{January 28, 1993}
-\def\FileVersion{1.2}
-
-%% INSTRUCTIONS FOR TWO-UP PRINTING.
-%% 1. Change \iffalse below to \iftrue.
-%% 2. Uncomment \special{landscape} if using Rokicki's dvips, or otherwise
-%%      remember to print the document out in landscape mode.
-%% 3. Uncomment one of the booklet options, if desired.
-%%
-\iffalse
-  \input 2up.tex
-  \targetlayout{twosided}
-  \TwoupWrites
-  % \special{landscape}     %% This works with Rokicki's dvips
-  % \targetlayout{Booklet}  %% Booklet printing with 2-sided printer/copier.
-  % \targetlayout{booklet}  %% Booklet printing with 1-sided printer/copier.
-\fi
-
-\makeatletter
-
-%% PAGE NUMBERING:
-%% Adjust page numbering if using booklet layout option.
-\setcounter{page}{0}
-\def\next{\if@leftpage\else\stepcounter{page}\fi}
-\@ifundefined{target@stop}{}{\next}
-
-%% CONTENTS:
-\def\tableofcontents{%
-  \par\begin{center}
-  \large\bf Contents
-  \end{center}
-  \begin{quote}\@starttoc{toc}\end{quote}}
-
-%% PAGE PARAMETERS:
-\setlength{\parindent}{0pt}          % paragraph indent
-\setlength{\parskip}{4pt plus 1pt minus 1pt}
-\setlength{\topmargin}{0pt}
-\setlength{\headheight}{12pt}        % height of running head
-\setlength{\headsep}{30pt}           % distance between header and text
-\setlength{\textheight}{8.2in}        % height of text on page
-
-%% DATES, VERSIONS AND TITLES:
-\def\@maketitle{%
- \begin{center}
-   {\Large\bf \@title \par}
-   \vskip 1.2em {\lineskip .5em
-   \begin{tabular}[t]{c}\@author\end{tabular}\par}
-   \vskip .8em {\@date}%
-  \end{center}
-  \par
-  \vskip .5em}
-
-%% Page Style:
-\pagestyle{myheadings}
-\markboth{Two-Up Style Guide}{Version \FileVersion, \FileDate}
-
-%% Special list:
-\newcommand{\namelistlabel}[1]{\mbox{\bf #1}\hfil}
-\newenvironment{namelist}[1]%
-  {\begin{list}{}%
-    {\let\makelabel\namelistlabel
-    \settowidth{\labelwidth}{#1}
-    \setlength{\leftmargin}{1.1\labelwidth}}}%
- {\end{list}}
-
-%% VERBATIM:
-%%
-\begingroup
-  \catcode`\{=12 \catcode`\}=12
-  \catcode`\(=1 \catcode`\)=2
-  \catcode`\+=0 \catcode`\\=12
-  +gdef+|(\)          % \| = character \
-  +gdef+{({)          % \{ = character {
-  +gdef+}(})          % \} = character }
-+endgroup
-\def\Backslash{\protect\|}
-%%
-%% Define some functional font commands:
-%%
-\def\MainFont{\tt}      % For macro definitions.
-\def\UsageFont{\tt}           % For in-line macro names.
-\def\InlineFont{\tt}          % For other in-line snipets of code.
-\def\MetaFont{\rm\it}            % For meta arguments.
-%%
-%% Short-cuts for font commands:
-%%
-\def\s#1{\string#1}
-\def\t#1{{\InlineFont\string#1}}   % For other in-line code.
-\def\m#1{{\MetaFont #1\/}}         % For just putting things in italics
-\def\M#1{{\InlineFont\{\m{#1}\}}}  % Arg is in italic, enclosed in tt braces.
-\let\N\t                           % For in-line macro names.
-\catcode`\<=13 \def<#1>{\m{#1}}    % <meta>
-\catcode`\"=13\def"{\verb"}        % Short verb
-%%
-%% This is for listing macro definitions in a quote-like environment.
-%%
-\begingroup
-  \catcode`\[=1 \catcode`\]=2
-  \catcode`\{=13 \catcode`\}=12
-  \gdef\@MD[%
-    \catcode`\{=13 \catcode`\}=12
-    \def{##1}[\{[\MetaFont ##1]\}]]
-\endgroup
-\def\MD{%
-  \quote
-  \begingroup
-    \@MD
-    \def\end{\endgroup\end}%
-    \def\\{\@centercr\s}%
-    \MainFont
-    \s}
-\def\endMD{\endquote}
-%%
-
-%% End preamble.
-\catcode`\@=12
-
-\begin{document}
-
-\title{Documentation for 2up.tex:\\
-  Two-up printing for Generic TeX}
-\author{Timothy Van Zandt\thanks{The documentation was put into
-  \LaTeX\ format by David Todd.}\\ Timothy.VAN-ZANDT@insead.edu}
-\date{Version \FileVersion\\[3pt] \FileDate}
-
-\maketitle
-\thispagestyle{empty}
-
-  "2up.tex"/"2up.sty" allows one to print a document two-up, with
-considerable flexibility as to paper size and layout. It produces a standard
-dvi file, and does not involve an additional dvi or PostScript filter. It
-should work with most \TeX\ macro packages.
-
-  {\bf Usage:} Input "2up.tex", or include "2up" as a LaTeX style option.
-There is a good chance you will get the desired layout. (But you will probably
-need to generate new font bitmaps to get high quality output.) See the rest of
-this documentation for detailed information on controlling 2up.tex.
-
-\begingroup
-\def\baselinestretch{.8}\large\normalsize
-\tableofcontents
-\endgroup
-\clearpage
-
-\section{Comparison with other methods}
-
-There are other tools for two-up printing:
-\begin{description}
-\item[PostScript filters]
-These work well as long as you only use PostScript fonts (as opposed to the
-usual Metafont fonts). Otherwise, the PostScript filter scales bitmapped
-fonts, and the quality is lower than with "2up.tex".
-
-\item[Rokicki's dvidvi]
-"dvidvi" is a versatil tool that does much more than
-2up printing. However, if only rearranges the pages, and does not adjust the
-magnification to ensure that the pages fit properly in a two-up format. It
-also adds one more step to the \TeX-dvi-printer cycle. "2up.tex", on the other
-hand, combines the changes to \TeX's magnification and page layout with the
-rearranging of the pages, all with an easy-to-use interface and from within
-your \TeX\ document. (See Section \ref{dvidvi} on using both "2up.tex" and
-"dvidvi" together.)
-\end{description}
-
-\section{A warning about fonts}
-
-Two-up printing generally involves reducing a document, and thus using fonts
-sizes that are not typically found on your system. If you are using bitmapped
-fonts (standard for \TeX\ users), and you do not have and cannot generate the
-extra fonts bitmaps, you will find 2up.sty (and any other method of two-up
-printing) to give very poor quality output.
-
-If you are using a program like Rokicki's "dvips" that can generate extra font
-bitmaps as needed, you will find that it takes a long time to print your 2up
-document the first few times, as "dvips" is busy making the extra fonts. This
-problem will go away. Be thankful you have such an easy way to get extra font
-bitmaps.
-
-\section{Usage}
-
-Input "2up.tex". \LaTeX\ users can include "2up" as a style option.
-
-Then set the target and source layout:
-\begin{MD}
-  \source{mag}{width}{height}\\
-  \target{mag}{width}{height}
-\end{MD}
-
-\begin{itemize}
-\item The ``source'' layout is the layout of your document
-the way it is usually printed.  The ``target'' layout is the layout when it
-is printed two-up.
-
-\item <width> and <height> are the true width and height of the paper,
-when looking at the output right-side-up.
-
-\item <mag> refers to the source and target magnification. It should be an
-integer, equal to 1000 times the magnification factor. There are also some
-magic magnification numbers:
-\begin{description}
-\item[$\setminus$magstep<n>] for a magnification of 1.2$^n$ (n=0,...,5), or
-
-\item[$\setminus$magstepminus<n>] for a magnification of 1.2$^{-n}$
-(n=0,...,5).
-\end{description}
-Using these magnification values will make best use of the available fonts on
-your system.
-\end{itemize}
-
-"2up.tex" takes each source page, and centers in half a target page. To get
-the pages to fit, the magnification of the document typically has to be
-reduced. If you find that the pages are too crowded, try reducing the target
-magnification. If they are too lonely, try increasing the target
-magnification.
-
-If you want to adjust the positioning of the scaled pages, try changing the
-values of "\hoffset" or "\voffset" with "\advance" or \LaTeX's "\addtolength".
-
-Don't change the magnification of your document after using the "\target"
-command, as you will override the settings made by 2up.tex.
-
-You can also specify some options:
-\begin{MD}
-  \targetlayout{options}
-\end{MD}
-where <options> is a comma separated list with no spaces. Valid
-options are:
-\begin{namelist}{topbottomxxx}
-
-\item [topbottom] The two source pages are printed one on top of the other.
-\item [twosided]  Odd pages are always printed on the right or the bottom.
-\item [booklet]   Pages are printed like a booklet. See Section \ref{booklet}.
-\item [Booklet]   Like "booklet", but for two-sided printers/copiers.
-\item [dvidvi]    For arranging in two-up layout with "dvidvi". See Section
-\ref{dvidvi}.
-
-\end{namelist}
-
-The only other changes you might want to make to your document are the
-following:
-\begin{itemize}
-\item You have to see to it that the target output is printed with the
-correct orientation (landscape or portrait). See the documentation for your
-dvi driver for details.
-
-\item "2up.tex" will inserts a line between pages if you change the following
-dimensions:
-\begin{namelist}{pagesepwidthxxx}
-\item [$\setminus$pagesepwidth]   Thickness of line. (Default 0pt)
-\item [$\setminus$pageseplength]  Length of line. (Default 6.5in)
-\item [$\setminus$pagesepoffset]  Distance from bottom of page to bottom of
-line, or (with "topbottom" layout) from side of page to beginning of line.
-(Default 1in)
-\end{namelist}
-
-\item You can, but do not need to, use the following commands:
-\begin{namelist}{twoupemptypagexxx}
-
-\item [$\setminus$twoupemptypage] inserts a completely blank half page
-in the target.
-
-\item [$\setminus$twoupclearpage] \LaTeX\ users: ejects a complete target
-page.
-
-\item [$\setminus$twoupeject] Plain \TeX users: ejects a complete target
-page.
-
-\end{namelist}
-\end{itemize}
-
-\section{Defaults}
-
-  The following commands set the parameters for some common sources and
-targets. The definitions of these commands are also useful examples.
-
-  For A4 paper, just replace "8.5in" and "11in" in the definitions below by
-the width and height of A4 paper.
-
-\begin{description}
-
-\item [$\setminus$twouparticle]
-
-This is the default for \LaTeX.
-\begin{namelist}{Sourcexx}
-
-\item [Source:] A portrait document on 8.5x11 inch paper with wide margins as
-used in \LaTeX's article style, and without marginal notes.
-
-\item [Target:] A landscape document on the same size paper, with the source
-pages printed side by side.
-
-\item [Definition:]\hspace{1pt}
-\begin{verbatim}
-\target{\magstepminus1}{11in}{8.5in}
-\source{\magstep0}{8.5in}{11in}}
-\end{verbatim}
-\end{namelist}
-
-If you use narrower side margins, or if you use marginal notes, then you
-will need to use "\twoupplain" or \\ "\twouplegaltarget", defined below.
-
-\item [$\setminus$twoupplain]
-
-This is the default for non-\LaTeX.
-
-It is the same as "\twouparticle", but for source documents with narrower
-margins.
-\begin{namelist}{Sourcexxx}
-
-\item [Definition:]\hspace{1pt}
-\begin{verbatim}
-\target{\magstepminus2}{11in}{8.5in}
-\source{\magstep0}{8.5in}{11in}
-\end{verbatim}
-\end{namelist}
-
-\item [$\setminus$twouplegaltarget]
-
-\begin{namelist}{Sourcexxx}
-\item [Source:] A portrait document on 8.5x11 inch paper with just about any
-margins and perhaps with marginal notes.
-
-\item [Target:] A landscape document on legal size paper (8.5x14 inches),
-with the source pages printed side by side.
-
-\item [Definition:]\hspace{1pt}
-\begin{verbatim}
-\target{\magstepminus1}{14in}{8.5in}
-\source{\magstep0}{8.5in}{11in}
-\end{verbatim}
-\end{namelist}
-
-\item [$\setminus$twouplandscape]\hspace{1pt}
-\begin{namelist}{Sourcexxx}
-
-\item [Source:] A landscape document on 8.5x11 inch paper with just about any
-margins.
-
-\item [Target:] A portrait document on the same size paper, with the
-source pages stacked vertically.
-
-\item [Definition:]\hspace{1pt}
-\begin{verbatim}
-\target{\magstepminus2}{8.5in}{11in}
-\source{\magstep0}{11in}{8.5in}
-\targetlayout{topbottom}
-\end{verbatim}
-\end{namelist}
-
-\end{description}
-
-
-\section{True Dimensions}
-
-\TeX\ lets you use `true' dimensions, as in
-\begin{verbatim}
-    \topmargin 1truein
-    \setlength{\topmargin}{1truein}
-\end{verbatim}
-This sets the length to 1 inch
-as it appears on the page, no matter what the magnification.
-
-Once you use `true' dimensions, it is impossible to change the
-magnification of your document, and hence it is almost impossible
-to use 2up.tex. You will get an error like:
-\begin{verbatim}
-    ! Incompatible magnification (833);
-      the previous value will be retained (2000).
-\end{verbatim}%
-
-The use of `true' dimensions might be hiding in macros or style files
-you are using. For example, Plain \TeX's "\magnification" command uses
-true dimensions; use "\mag" instead, and then set "\hsize" and
-"\vsize" appropriately scaled. If you can't find the culprit `true'
-dimension in your document or input files, try putting this on the
-(very) first line of your document:
-\begin{verbatim}
-    \mag 143 \voffset 1truein \mag 1000
-\end{verbatim}
-
-You will get the error listed above wherever true dimensions are used
-(and in some other places as well).
-
-
-\section{Page Cross-References}
-
-  Page cross-references (e.g., in an index or table of contents) will not be
-accurate with "2up.tex", because finished pages are not immediately shipped
-out. This can also cause problems with some special \LaTeX\ styles that have
-multiple ".aux" files (e.g., for each chapter).
-
-  To get better, but not perfect, page cross-references, try putting the
-command
-\begin{verbatim}
-    \TwoupWrites
-\end{verbatim}
-at the beginning of your document, after inputting "2up.tex". This is good for
-drafts, and may fix problems with \LaTeX\ styles that have multiple ".aux"
-files. "\TwoupWrites" makes "\write" and "\read" "\immediate", if you know
-what that means. It might cause problems of its own, but try it and see.
-
-  To get accurate page cross-references:
-\begin{enumerate}
-\item Run the job without "2up.tex", until all cross-references
-are properly resolved. Run any index utility at this point.
-
-\item Run the job ONE MORE TIME with "2up.tex"; it will use the
-correct cross-references from the previous runs. (In \LaTeX\ documents,
-it is useful at this point to include the "\nofiles" command, so that
-the correct cross-references are preserved.)
-\end{enumerate}
-
-\section{Booklets\label{booklet}}
-
-Here are some special considerations for making booklets:
-
-\begin{itemize}
-
-\item  Use the "booklet" target layout if your printer or copier cannot print
-two
-sides directly. "2up.tex" prints out the ``tops'' of the pages, and then the
-``bottoms'', so that you can copy or print on both sides by doing one side,
-flipping the output over, and doing the other side.
-
-\item Use "Booklet" if your printer or copier can print directly on two sides.
-
-\item You must have enough memory and box registers to hold all the pages in
-the document. A Big\TeX\ should be able to handle at least a 32-page booklet.
-
-\item Sometimes booklet printing is part of the design of a document, rather
-than an afterthought. In this case, you should set up the margins for the
-target half-page rather than using "2up.tex" to scale the document. For
-example, if using \LaTeX, 8.5x11 inch paper, \LaTeX's twoside style option,
-and headings, try the following page parameter changes:
-\begin{verbatim}
-    \setlength{\oddsidemargin}{-0.2in}
-    \setlength{\evensidemargin}{-0.5in}
-    \setlength{\textwidth}{4.2in}
-    \setlength{\textheight}{6.5in}
-    \setlength{\topmargin}{-.4in}
-\end{verbatim}
-If you do this, "2up.tex" isn't adjusting margins or scaling the
-document. You coould therefore get by without "2up.tex" by using "dvidvi".
-\end{itemize}
-
-\section{Using dvidvi\label{dvidvi}}
-
-  With the "dvidvi" layout option, "2up.tex" takes care of adjusting the
-margins, and you then use "dvidvi" to arrange the pages in a two-up
-format. The advantage is that cross referencing comes out right.
-The disadvantage is that it involves one more step.
-
-Start by \TeX ing your document with "2up.tex" and the "dvidvi" layout option.
-Then run the dvi file through "dvidvi". Specify the offsets for "dvidvi" at
-the middle of the page. E.g., for
-a side-by-side layout on 8.5x11in paper, use
-\begin{verbatim}
-    dvidvi '2:0,1(5.5in,0in)' foo bar
-\end{verbatim}
-For other paper sizes, replace "5.5in" by half the target paper width. For the
-"topbottom" layout, reverse the dimensions, e.g.,
-(0in,5.5in). For booklet printing, see the
-the documentation for "dvidvi".
-
-
-\section{Compatibility\label{compatibility}}
-
-  These macros should work with most \TeX\ macro packages, except for
-the following possible but unlikely compatibility problems:
-
-\begin{itemize}
-
-\item If you use a macro package other than \LaTeX\ that does unusual things
-to end a document and/or that modifies the definition of "\end", you may
-find that the last page is nor printed or that an extra page with headings
-is inserted at the end of the document. This is fixable on a case-by-case
-basis. See the redefinition of "\end" in "2up.tex".
-
-\item "2up.tex" might not work if you meddle with \TeX's "\shipout" primitive
-after loading "2up.tex".
-
-\item If the first page of the source document is not on the first two-up
-target
-page (possible, for example, with two-sided printing and the "booklet"
-option, but generally unlikely), "\special"'s that come at the beginning
-of the document also do not get onto the first page of output. This can mess
-up "\special"'s for landscape printing or
-including a PostScript header file. In this case, you have to specify
-these things as command line options when using your dvi driver.
-
-\end{itemize}
-
-
-\section{Changes}
-\begin{namelist}{V0.9xxx}
-\raggedright
-
-\item [V0.9a] Everything redone. Too many differences to point out.
-
-\item [V0.9b] Interface redone again. "booklet" option added.
-
-\item [V0.9c] Pages ship out a little earlier. A few bugs fixed.
-
-  Parameters "\pageseplength" and "\pagesepthickness" added.
-
-\item [V0.9d] Fixed bug with "\twoupclearpage" and "\twoupeject".
-
-\item [V0.9e] Made pages be counted (from dvi driver's viewpoint) by the
-physical page number.
-
-\item [V0.9f] Parameter "\pagesepoffset" added, and "\pagesepthickness"
-changed to "\pagesepwidth".
-
-\item [V1.0]  None. Just seemed seemed like it was time to call it 1.0
-
-\item [V1.1] Added "Booklet" and "dvidvi" target layouts.
-
-  "\hoffset" and "\voffset" in source document now have expected effect.
-
-\item[V1.2] Fixed incompatibility problem with AmS-\TeX/AmS-\LaTeX.
-
-  Added "\TwoupWrites" command.
-
-\end{namelist}
-\end{document}
-%% END 2up.doc
diff --git a/Master/texmf-dist/tex/latex/seminar/2up.sty b/Master/texmf-dist/tex/latex/seminar/2up.sty
deleted file mode 100644
index ec109716932..00000000000
--- a/Master/texmf-dist/tex/latex/seminar/2up.sty
+++ /dev/null
@@ -1,3 +0,0 @@
-\ProvidesPackage{2up}[1998/03/13 package wrapper for 2up.tex]
-\input 2up.tex
-\endinput
diff --git a/Master/texmf-dist/tex/latex/seminar/2up.tex b/Master/texmf-dist/tex/latex/seminar/2up.tex
deleted file mode 100644
index a6dd259c47c..00000000000
--- a/Master/texmf-dist/tex/latex/seminar/2up.tex
+++ /dev/null
@@ -1,382 +0,0 @@
-%% BEGIN 2up.tex/2up.sty
-%%
-\def\fileversion{1.2}
-\def\filedate{93/01/28}
-%%
-%% COPYRIGHT 1992, 1993 by Timothy Van Zandt, Timothy.VAN-ZANDT@insead.edu
-%%
-%% DESCRIPTION:
-%%   2up.tex/2up.sty provides two-up printing for Generic TeX (e.g.,
-%%   Plain, LaTeX, AmSTeX and AmS-LaTeX). It produces a standard dvi file,
-%%   and does not involve an additional dvi or PostScript filter. It has a
-%%   flexible interface for specifying paper size and layout.
-%%
-%% INSTALLATION:
-%%   Put this file where your TeX looks for inputs, under the name 2up.tex.
-%%   Name a copy 2up.sty to use as a LaTeX style option, or create a file
-%%   2up.sty with the lines:
-%%     \input 2up.tex
-%%     \endinput
-%%
-%% DOCUMENTATION:
-%%   Input 2up.tex, or include 2up as a LaTeX style option. There is a
-%%   good chance you will get the desired layout. (But you will probably
-%%   need to generate new font bitmaps to get high quality output.) See
-%%   2up.doc, which might be appended to this file, for detailed
-%%   documentation.
-%%
-%% This file may be distributed and/or modified under the conditions of
-%% the LaTeX Project Public License, either version 1.2 of this license
-%% or (at your option) any later version.  The latest version of this
-%% license is in:
-%% 
-%%    http://www.latex-project.org/lppl.txt
-%% 
-%% and version 1.2 or later is part of all distributions of LaTeX version
-%% 1999/12/01 or later.
-%%
-%%
-%% CODE:
-%
-\csname TwoUpLoaded\endcsname
-\let\TwoUpLoaded\endinput
-%
-\edef\TheAtCode{\the\catcode`\@}
-\catcode`\@=11\relax
-\message{\space\space v\fileversion\space\space \filedate\space\space <tvz>}
-%
-% Parameter registers:
-\newdimen\@targetwidth
-\newdimen\@targetheight
-\newdimen\@sourcewidth
-\newdimen\@sourceheight
-\newdimen\pageseplength
-\newdimen\pagesepwidth
-\newdimen\pagesepoffset
-\newif\if@sidebyside
-\@sidebysidetrue
-\newif\if@twosided
-%
-% Registers used by output routine.
-\newif\if@leftpage
-\@leftpagetrue
-\newbox\@leftpage
-\newbox\@rightpage
-\newcount\@physicalpage
-%
-% Since pages are shipped out half as often:
-\multiply\maxdeadcycles by 2
-%
-% Registers used only for booklet layout:
-\begingroup
-  \let\newcount\relax
-  \gdef\booklet@registers{%
-    \newcount\bookletpage
-    \bookletpage=0
-    \newcount\leftpagenumber
-    \newcount\rightpagenumber
-    \multiply\maxdeadcycles by 20}
-\endgroup
-%
-% A useful extension of the \magstep macro.
-\def\magstepminus#1{%
-  \ifcase#1 \@m\or 833\or 694\or 579\or 482\or 401\fi\relax}
-%
-% \@targetwidth and \@targetheight are set to the *unmagnified* dimensions
-% of the target page. \inv@targetmag is the inverse of the target
-% magnification.
-{\catcode`\p=12\catcode`\t=12\gdef\@@inv@@mag#1pt#2{\def#2{#1}}}
-\def\target#1#2#3{%
-  \mag #1\relax
-  \@targetwidth=1000pt
-  \divide\@targetwidth by #1\relax
-  \expandafter\@@inv@@mag\the\@targetwidth\inv@targetmag
-  \@targetwidth=#2\relax
-  \@targetwidth=\inv@targetmag\@targetwidth
-  \@targetheight=#3\relax
-  \@targetheight=\inv@targetmag\@targetheight}
-%
-% Like \target, but for the source:
-\def\source#1#2#3{%
-  \@sourcewidth=1000pt
-  \divide\@sourcewidth by #1\relax
-  \expandafter\@@inv@@mag\the\@sourcewidth\inv@sourcemag
-  \@sourcewidth=#2\relax
-  \@sourcewidth=\inv@sourcemag\@sourcewidth
-  \@sourceheight=#3\relax
-  \@sourceheight=\inv@sourcemag\@sourceheight}
-%
-% \targetlayout does a loop that reads the comma separated arguments.
-% There can be no extraneous spaces.
-\def\targetlayout#1{\process@targetlayout#1,stop,}
-\def\process@targetlayout#1,{%
-  \expandafter\let\expandafter\next\csname target@#1\endcsname
-  \ifx\next\relax
-    \begingroup
-      \errhelp{Valid target layouts are "topbottom", "twosided",
-        "booklet", "Booklet" and "dvidvi".}%
-      \errmessage{`#1' is invalid 2up target layout - ignored.}%
-    \endgroup
-    \expandafter\process@targetlayout
-  \else
-    \next
-  \fi}
-\def\target@stop{}
-\def\target@booklet{%
-  \booklet@registers
-  \def\ship@@@leftpage{\save@booklet\@leftpage}%
-  \def\ship@@@rightpage{\save@booklet\@rightpage}%
-  \@leftpagefalse
-  \def\twoup@eject{\twoup@eject@booklet}%
-  \expandafter\process@targetlayout}
-\def\target@Booklet{%
-  \def\booklet@@loop{\Booklet@@loop}%
-  \target@booklet}
-\def\target@twosided{%
-  \@twosidedtrue
-  \expandafter\process@targetlayout}
-\def\target@topbottom{%
-  \def\make@@halfpage{\make@@halftopbottom}%
-  \def\make@fullpage{\make@fulltopbottom}%
-  \@sidebysidefalse
-  \expandafter\process@targetlayout}
-\def\target@dvidvi{%
-  \def\ship@@@leftpage{\ship@dvidvi\@leftpage}%
-  \def\ship@@@rightpage{\ship@dvidvi\@rightpage}%
-  \expandafter\process@targetlayout}
-%
-% TeX's \shipout primitive is saved as \&normal@shipout, and then \shipout
-% is defined to save each page to \@leftpage or \@rightpage and to print out
-% every two. With the twosided layout, filler pages are added when needed.
-\expandafter\let\csname &normal@shipout\endcsname\shipout
-\def\shipout{%
-  \if@leftpage
-    \global\@leftpagefalse
-    \def\next{\afterassignment\ship@leftpage\global\setbox\@leftpage=}%
-    \if@twosided
-      \ifodd\count\z@
-        \global\setbox\@leftpage=\hbox{}%
-        \make@@halfpage\@leftpage\ship@@@leftpage
-        \def\next{\shipout}%
-      \fi
-    \fi
-  \else
-    \global\@leftpagetrue
-    \def\next{\afterassignment\ship@rightpage\global\setbox\@rightpage=}%
-    \if@twosided
-      \ifodd\count\z@
-      \else
-        \global\setbox\@rightpage=\hbox{}%
-        \make@@halfpage\@rightpage\ship@@@rightpage
-        \def\next{\shipout}%
-      \fi
-    \fi
-  \fi
-  \next}
-%
-% The job of \ship@leftpage and \ship@rightpage is to invoke \ship@@leftpage
-% or \ship@@rightpage at the right time. \shipout is followed either
-% (i) by an \hbox, \vbox or \vtop, in which case \ship@leftpage is invoked
-% after the opening {. \@leftpage is void, and \ship@leftpage invokes
-% \ship@@leftpage after the closing }, or
-% (ii) by a \box or \copy, in which case \ship@leftpage is invoked after
-% the full assignment. \@leftpage is not voide, and \ship@leftpage invokes
-% \ship@@leftpage immediately.
-\def\ship@leftpage{%
-  \ifvoid\@leftpage\aftergroup\ship@@leftpage\else\ship@@leftpage\fi}
-\def\ship@rightpage{%
-  \ifvoid\@rightpage\aftergroup\ship@@rightpage\else\ship@@rightpage\fi}
-%
-% \ship@@leftpage/\ship@@rightpage take the output box, and first make it
-% into a fully-size source page (with \make@halfpage) and then this is
-% centered horizontally and vertically in half of a target page (with
-% \make@@halfpage). Then they are shipped individually or together.
-\def\ship@@leftpage{\make@halfpage\@leftpage\ship@@@leftpage}
-\def\ship@@rightpage{\make@halfpage\@rightpage\ship@@@rightpage}
-\def\make@halfpage#1{%
-  \dp#1=\z@
-  \setbox#1=\vbox to\@sourceheight{%
-    \vskip \inv@sourcemag in
-    \vskip \voffset
-    \hbox to\@sourcewidth{\hskip\inv@sourcemag in\hskip\hoffset\box#1\hss}%
-    \vss}%
-  \make@@halfpage#1}
-%
-% The definition of \make@@halfpage depends on the target layout.
-\def\make@@halfsidebyside#1{%
-  \global\setbox#1=\vbox to\@targetheight{\vss
-    \hbox to.5\@targetwidth{\hss\box#1\hss}\vss}}
-\def\make@@halftopbottom#1{%
-  \global\setbox#1=\vbox to.5\@targetheight{\vss
-    \hbox to\@targetwidth{\hss\box#1\hss}\vss}}
-\def\make@@halfpage{\make@@halfsidebyside}
-%
-% The pages are generaly shipped in pairs:
-\def\ship@twoup{%
-  \begingroup
-    \voffset=-\inv@targetmag in
-    \hoffset=\voffset
-    \global\advance\@physicalpage by 1
-    \count\z@=\@physicalpage
-    \csname &normal@shipout\endcsname\make@fullpage
-  \endgroup}
-\let\ship@@@leftpage\relax
-\def\ship@@@rightpage{\ship@twoup}
-%
-% The definition of \make@fullpage depends on the layout:
-\def\make@fullsidebyside{%
-  \hbox{\box\@leftpage\pagesep@sidebyside\box\@rightpage}}
-\def\make@fulltopbottom{%
-  \vbox{\offinterlineskip\box\@leftpage\pagesep@topbottom\box\@rightpage}}
-\def\make@fullpage{\make@fullsidebyside}
-%
-% A vertical or horizontal rule can be inserted. These can be redefined
-% for other tricks:
-\def\pagesep@sidebyside{%
-  \begingroup
-    \advance\pageseplength by \pagesepoffset
-    \pagesepwidth=\inv@targetmag\pagesepwidth
-    \kern -.5\pagesepwidth
-    \vrule height \inv@targetmag\pageseplength
-           depth -\inv@targetmag\pagesepoffset
-           width \pagesepwidth
-    \kern -.5\pagesepwidth
-  \endgroup}
-\def\pagesep@topbottom{%
-  \begingroup
-    \pagesepwidth=\inv@targetmag\pagesepwidth
-    \vskip -.5\pagesepwidth
-    \moveright\inv@targetmag\pagesepoffset\hbox{%
-      \vrule height\pagesepwidth width\inv@targetmag\pageseplength}%
-    \vskip -.5\pagesepwidth
-  \endgroup}
-%
-% With the dvidvi layout, the pages are shipped individually:
-\def\ship@dvidvi#1{%
-  \begingroup
-    \voffset=-\inv@targetmag in
-    \hoffset=\voffset
-    \csname &normal@shipout\endcsname\box#1%
-  \endgroup}
-%
-% With the booklet or Booklet layout, the pages are saved rather than
-% shipped.
-\begingroup
-\let\newbox\relax
-\gdef\save@booklet#1{%
-  \begingroup
-    \globaldefs=1
-    \advance\bookletpage by 1
-    \expandafter\newbox\csname bookletbox\the\bookletpage\endcsname
-    \expandafter\setbox\csname bookletbox\the\bookletpage\endcsname\box#1%
-  \endgroup}
-\endgroup
-%
-% The pages are then printed at the end with the following macros:
-\def\make@bookletpage#1{%
-  \setbox\ifodd#1\@rightpage\else\@leftpage\fi=%
-    \expandafter\box\csname bookletbox\the#1\endcsname}
-\def\booklet@loop{%
-  \count\z@\rightpagenumber
-  \make@bookletpage\leftpagenumber
-  \make@bookletpage\rightpagenumber
-  \ship@twoup
-  \booklet@@loop}
-\def\booklet@@loop{%
-  \advance\rightpagenumber by 2
-  \advance\leftpagenumber by -2
-  \ifnum\leftpagenumber<1\else\expandafter\booklet@loop\fi}
-\def\Booklet@@loop{%
-  \advance\rightpagenumber by 1
-  \advance\leftpagenumber by -1
-  \ifnum\leftpagenumber<\rightpagenumber\else\expandafter\booklet@loop\fi}
-%
-% This one is easy:
-\def\twoupemptypage{\shipout\hbox{}}
-%
-% This clears a whole target page if there is a saved left page. Note that
-% this does not invoke the output routine; i.e., it is not like \clearpage
-% or \supereject. See \twoupclearpage and \twoupeject below.
-\def\twoup@eject{%
-  \if@leftpage\else
-    \global\setbox\@rightpage\hbox{}%
-    \make@@halfpage\@rightpage\ship@@@rightpage
-    \global\@leftpagetrue
-  \fi}
-%
-% This is the definition of \twoup@eject with the booklet option:
-\def\twoup@eject@booklet{%
-  \leftpagenumber\bookletpage
-  \advance\leftpagenumber by 3
-  \divide\leftpagenumber by 4
-  \multiply\leftpagenumber by 4
-  \rightpagenumber=1
-  \ifnum\leftpagenumber>\bookletpage
-    \setbox\@leftpage\hbox{}%
-    \make@@halfpage\@leftpage
-    \loop
-      \setbox\@rightpage\copy\@leftpage
-      \save@booklet\@rightpage
-    \ifnum\leftpagenumber>\bookletpage
-    \repeat
-  \fi
-  \booklet@loop}
-%
-% This modification is needed for \LaTeX in order to get the last page
-% printed out if the final page is a left page (the catcode business is
-% because \enddocument is \let to \bye in amstex):
-\begingroup
-\expandafter\ifx\csname @latexerr\endcsname\relax
-  \catcode`\>=14\else\catcode`\>=9\fi\relax
->>\gdef\twoupclearpage{\clearpage\twoup@eject}
->>\expandafter\@temptokena\expandafter{\enddocument}
->>\xdef\enddocument{\noexpand\twoupclearpage\the\@temptokena}
-\endgroup
-%
-% For most other macro packages we could just leave be and all pages would
-% always be printed because of the way the \end primitive works (except that
-% TeX will go bonkers with the booklet layout). However,
-% sometimes a blank filler page would be printed *with* headings. We prefer
-% the filler page to be truly blank. To achieve this,  we hack the definition
-% of \end. This may cause problems with some macros.
-\expandafter\ifx\csname @latexerr\endcsname\relax
-  \let\twoup@@@end\end
-  \def\end{\twoup@eject\twoup@@@end}
-  \def\twoupeject{\par\vfil\supereject\twoup@eject}
-\fi
-%
-% This is one workaround for the page cross-references problem
-\def\TwoupWrites{%
-  \let\TwoupSaved@write\write
-  \let\TwoupSaved@read\read
-  \let\TwoupSaved@openout\openout
-  \let\TwoupSaved@closeout\closeout
-  \def\write{\TwoupSaved@write-1{}\immediate\TwoupSaved@write}%
-  \def\read{\TwoupSaved@write-1{}\immediate\TwoupSaved@read}%
-  \def\openout{\TwoupSaved@write-1{}\immediate\TwoupSaved@openout}%
-  \def\closeout{\TwoupSaved@write-1{}\immediate\TwoupSaved@closeout}%
-  \let\TwoupWrites\relax}
-%
-% Defaults:
-\def\twouparticle{%
-  \target{\magstepminus1}{11in}{8.5in}%
-  \source{\magstep0}{8.5in}{11in}}
-\def\twoupplain{%
-  \target{\magstepminus2}{11in}{8.5in}%
-  \source{\magstep0}{8.5in}{11in}}
-\def\twouplegaltarget{%
-  \target{\magstepminus1}{14in}{8.5in}%
-  \source{\magstep0}{8.5in}{11in}}%
-\def\twouplandscape{%
-  \target{\magstepminus2}{8.5in}{11in}%
-  \source{\magstep0}{11in}{8.5in}%
-  \targetlayout{topbottom}}
-\expandafter\ifx\csname @latexerr\endcsname\relax
-  \twoupplain\else\twouparticle\fi
-\pagesepwidth 0pt
-\pageseplength 6.5in
-\pagesepoffset 1in
-%
-\expandafter\catcode`\@=\TheAtCode\relax
-\endinput
-%% END 2up.tex/2up.sty
diff --git a/Master/texmf-dist/tex/latex/seminar/xcomment.sty b/Master/texmf-dist/tex/latex/seminar/xcomment.sty
deleted file mode 100644
index a85231d2c00..00000000000
--- a/Master/texmf-dist/tex/latex/seminar/xcomment.sty
+++ /dev/null
@@ -1,192 +0,0 @@
-%%
-%% This is file `xcomment.sty', generated
-%% on <1993/2/17> with the docstrip utility (2.0r).
-%%
-%% The original source files were:
-%%
-%% xcomment.doc
-%%
-\def\fileversion{1.2}
-\def\filedate{93/02/12}
-%%
-%% Style option `xcomment' for use with LaTeX v2.09.
-%% This is a style for comment and "inverse" comment environments.
-%%
-%% COPYRIGHT 1992, 1993 by Timothy Van Zandt, Timothy.VAN-ZANDT@insead.edu
-%%
-%% Input file:                  xcomment.sty.
-%% Documented code:             xcomment.doc.
-%% For printing documentation:  xcomment.tex.
-%%
-%% You may find xcomment.doc and xcomment.tex appended to xcomment.sty.
-%%
-%%
-%% This file may be distributed and/or modified under the conditions of
-%% the LaTeX Project Public License, either version 1.2 of this license
-%% or (at your option) any later version.  The latest version of this
-%% license is in:
-%% 
-%%    http://www.latex-project.org/lppl.txt
-%% 
-%% and version 1.2 or later is part of all distributions of LaTeX version
-%% 1999/12/01 or later.
-%%
-%%
-\@ifundefined{xcomment@@@}{}{\endinput}
-\typeout{Style-Option: `xcomment' v\fileversion \space <\filedate> (tvz) }
-\def\newxcomment{\@ifnextchar [{\@newxcommentwitharg}%
-  {\@newxcomment}}
-\def\@newxcomment#1{%
-  \expandafter\def\csname #1\endcsname##1{\@xcomment{#1}{##1}}}%
-\def\@newxcommentwitharg[#1]#2{%
-  \expandafter\def\csname #2\endcsname{\@xcomment{#2}{#1}}}
-\newxcomment{xcomment}
-\def\envirsep{\par}
-\def\rescanfile#1{\def\@rescanfile{#1}}
-\rescanfile{\jobname.tmp}
-\def\norescanfile{\let\@rescanfile\relax}
-\def\@nofloat#1{\hrule height\z@\nobreak\vfill\vbox\bgroup\def\@captype{#1}}
-\def\end@nofloat{\egroup\nobreak\vfill\nobreak\hrule height\z@\medbreak}
-\def\nofloat#1{\@for\@tempa:=#1\do{\@namedef{#1}{\@nofloat{#1}}%
-  \@namedef{end#1}{\end@nofloat}}}
-\def\xc@makeother#1{%
-  \ifnum\the\catcode`#1=0\catcode`#112%
-  \else \ifnum\the\catcode`#1=1\catcode`#112%
-    \else \ifnum\the\catcode`#1=2\catcode`#112%
-      \else \ifnum\the\catcode`#1=6\catcode`#112%
-  \fi\fi\fi\fi\relax}
-\newwrite\tokout
-\newread\tokin
-\def\rescan#1{%
-  \ifx\@rescanfile\relax\else
-    \ifx\@rescanfile\@empty #1{}\else
-      \immediate\openout\tokout=\@rescanfile
-      \immediate\write\tokout{{\the#1}\relax}%
-      \immediate\closeout\tokout
-      \openin\tokin=\@rescanfile
-      \read\tokin to\@tempd
-      \closein\tokin
-      \expandafter#1\@tempd%
-  \fi\fi}
-\def\@xcomment#1#2{%
-  \ifx\@preamblecmds\@notprerr
-    \def\xc@csname{#1}%
-    \edef\xc@envirlist{#2}%
-    \ifx\xc@envirlist\@empty \@bsphack \else
-      \begingroup
-      \def\@envirsep{}%
-      \@ifundefined{normal@begin}{\let\normal@begin\begin}{}%
-      \@ifundefined{normal@end}{\let\normal@end\end}{}%
-      \def\begin##1{\do@begin{##1}\normal@begin{##1}}%
-      \def\end##1{\normal@end{##1}\do@end}%
-      \def\do@begin##1{\@ifundefined{##1}{}{\def\do@end{}}}%
-      \let\do@end\xc@begin
-    \fi
-    \let\next\xc@begin
-  \else
-    \expandafter\@temptokena\expandafter{\document\@xcomment{@@@}{#2}}%
-    \edef\document{\the\@temptokena}%
-    \let\next\relax
-  \fi
-  \next}
-\def\end@xcomment{\ifx\xc@envirlist\@empty \@esphack \else \endgroup \fi}%
-\def\xc@begin{%
-  \begingroup
-    \let\do\xc@makeother
-    \dospecials
-    \ifx\xcommentchar\@empty\else
-      \expandafter\catcode\expandafter`\xcommentchar=14
-    \fi
-    \catcode`\^^M\active
-    \xcomment@}
-\def\xcommentchar{\%}
-\begingroup
-\catcode`\!=12
-\catcode`\[=12
-\catcode`\]=12
-\catcode`\"=12
-\lccode`\!=`\\
-\lccode`\[=`\{
-\lccode`\]=`\}
-\lccode`\"=`\%
-\catcode`\~=\active
-\lccode`\~=`\^^M
-\lowercase{
-  \gdef\xcomment@#1~{\xcomment@@#1\@nnil!\@nil}
-  \gdef\xcomment@@#1!{\xcomment@@@}
-  \gdef\xcomment@@@#1\@nil{%
-    \def\@tempa{#1}%
-    \ifx\@tempa\@empty
-      \let\next\xcomment@
-    \else
-      \def\next{\xcomment@@#1\@nil}%
-      \@testtrue
-      \xc@checkbegin#1\relax begin[]\relax\relax
-      \if@test
-        \xc@checkend#1\relax end[]\relax\relax
-        \if@test
-          \xc@checkinput#1\relax input[]\relax\relax
-          \if@test
-            \xc@checkinclude#1\relax include[]\relax\relax
-            \if@test
-              \xc@checkendinput#1\relax endinputss\relax\relax
-    \fi\fi\fi\fi\fi
-    \next}
-  \gdef\xc@checkbegin#1begin[#2]#3\relax#4\relax{%
-    \def\@tempa{#1}%
-    \ifx\@tempa\@empty
-      \def\@tempa{#2}%
-      \@for\@tempb:=\xc@envirlist\do{%
-        \ifx\@tempa\@tempb\def\next{\xc@end{#2}#3\@nil}\fi}%
-    \fi}
-  \gdef\xc@checkend#1end[#2]#3\relax#4\relax{%
-    \def\@tempa{#1}%
-    \ifx\@tempa\@empty
-      \@testfalse
-      \def\@tempa{#2}\def\@tempb{document}%
-      \ifx\@tempa\@tempb
-        \def\next{\endgroup\end@xcomment\end{document}}%
-      \else
-        \ifx\@tempa\xc@csname
-          \def\next{\end@@xcomment{#2}#3\@nil}%
-    \fi\fi\fi}
-  \gdef\xc@checkinput#1input[#2]#3\relax#4\relax{%
-    \def\@tempa{#1}%
-    \ifx\@tempa\@empty
-      \def\next{\expandafter\xcomment@\@@input #2 \xcomment@@#3\@nil}%
-      \@testfalse
-    \fi}
-  \gdef\xc@checkendinput#1endinput#2#3\relax#4\relax{%
-    \def\@tempa{#1}%
-    \ifx\@tempa\@empty\ifcat\noexpand#2a\relax\else
-      \let\next\endinput
-    \fi\fi}
-  \gdef\xc@checkinclude#1include[#2]#3\relax#4\relax{%
-    \def\@tempa{#1}%
-    \ifx\@tempa\@empty
-      \def\next{%
-        \global\let\xc@savedinput\@@input
-        \def\@@input{%
-          \global\let\@@input\xc@savedinput
-          \expandafter\xcomment@\@@input}%
-        \include{#2}%
-        \global\let\@@input\xc@savedinput
-        \xcomment@@#3\@nil}%
-      \@testfalse
-    \fi}
-  \gdef\end@@xcomment#1#2\@nnil!\@nil{%
-    \endgroup
-    \toks@{#2 }\rescan{\toks@}%
-    \edef\next{\noexpand\end@xcomment\noexpand\end{#1}\the\toks@}%
-    \next}%
-  \gdef\xc@end#1#2\@nnil!\@nil{%
-    \endgroup
-    \@envirsep \let\@envirsep\envirsep
-    \toks@{#2 }\rescan{\toks@}%
-    \edef\next{\noexpand\normal@begin{#1}\the\toks@}%
-    \next}%
-  }%  END OF LOWERCASE
-\endgroup
-\endinput
-%%
-%% End of file `xcomment.sty'.