rm eurofont, support for nonfree fonts from Adobe, and/or old nonfree latex notices, and/or obsolete versions

git-svn-id: svn://tug.org/texlive/trunk@22193 c570f23f-e606-0410-a88d-b1316a301751

33 files changed, 1 insertions, 6582 deletions

diff --git a/Master/texmf-dist/doc/fonts/eurofont/README.europs b/Master/texmf-dist/doc/fonts/eurofont/README.europs
deleted file mode 100644
index f59e98140ac..00000000000
--- a/Master/texmf-dist/doc/fonts/eurofont/README.europs
+++ /dev/null
@@ -1,156 +0,0 @@
-Adobe's Euro currency fonts for LaTeX
-=====================================
-
-[ Note: this Europs package has been merged with the fonts/euro package
-so the paths in this documentation aren't correct any more.  You find all
-support files apart from the Adobe fonts itself in the directory
-CTAN:/tex-archive/fonts/euro.
-
-Reinhard Zierke, 09-Aug-1999 ]
-
-
-1. Introduction
----------------
-
-This is yet another attempt to provide the Euro currency symbol for LaTeX.
-There are already several solutions, but each with limited possibilities:
-
- - The package marvosym (by Thomas Henlich) provides a PostScript font with
-   four glyphs: The official Euro symbol, and three not-so-official shapes
-   which are more convenient when using the symbol together with Times,
-   Helvetica or Courier.
-
- - The package eurosym (by Henrik Theiling) provides the Euro symbol in
-   several shapes, among them one that is constructed from the exact
-   specifications. The font itself is done with Metafont, which is not
-   a problem by itself. But if you want to create PDFs containing the Euro
-   symbol, you're bound for trouble.
-
- - Finally, there is a set of tfm files for Adobe's Euro fonts, which were
-   placed on CTAN on behalf of Y&Y. The included (plain) TeX-example works,
-   but leaves much to be desired.
-
-
-2. This Package
----------------
-
-So, several solutions, but every single one has it's drawbacks. So I decided
-to try to hack something together, and that's what I came up with:
-
- - I use the twelve fonts distributed by Adobe, as the Y&Y package does.
-
- - The font names conform to Karl Berry's naming scheme. The following
-   list gives the PostScript names and the corresponding TeX names. The
-   two other file names in the list are used later:
-
-     PostScript            TeX            PC             Macintosh
-
-     EuroSans-Regular      zpeurs.pfb     _1______.PFB   EuroSanReg
-     EuroSans-Italic       zpeuris.pfb    _1I_____.PFB   EuroSanIta
-     EuroSans-Bold         zpeubs.pfb     _1B_____.PFB   EuroSanBol
-     EuroSans-BoldItalic   zpeubis.pfb    _1BI____.PFB   EuroSanBolIta
-
-     EuroSerif-Regular     zpeur.pfb      _3______.PFB   EuroSerReg
-     EuroSerif-Italic      zpeuri.pfb     _3I_____.PFB   EuroSerIta
-     EuroSerif-Bold        zpeub.pfb      _3B_____.PFB   EuroSerBol
-     EuroSerif-BoldItalic  zpeubi.pfb     _3BI____.PFB   EuroSerBolIta
-
-     EuroMono-Regular      zpeurt.pfb     _2______.PFB   EuroMonReg
-     EuroMono-Italic       zpeurit.pfb    _2I_____.PFB   EuroMonIta
-     EuroMono-Bold         zpeubt.pfb     _2B_____.PFB   EuroMonBol
-     EuroMono-BoldItalic   zpeubit.pfb    _2BI____.PFB   EuroMonBolIta
-
- - I have included fd files, so that within each of the three font families
-   the usual NFSS commands for changing series and shape work.
-
- - The file europs.sty defines five commands for selecting the Euro symbol:
-
-     \EURhv     selects EuroSans
-     \EURtm     selects EuroSerif
-     \EURcr     selects EuroMono
-     \EUR       selects one of the three above, depending on the current
-                context
-     \EURofc    selects EuroSans Regular independent of context
-                N.B.: This is the only "official" Euro symbol. If you
-                      want to conform with the rules of the EU (or
-                      whoever), you may only use this symbol.
-
-   The first four names are stolen from marvosym. Although the association
-   with Helvetica, Times and Courier is not necessarily intelligent, these
-   names are easy to remember.
-
-So, you can simply say
-
-   \textsf{just my 2 \EUR}
-   \textbf{\textit{just my 2 \EUR}}
-
-and you get the symbol you expect.
-
-
-3. Installation
----------------
-
-This archive consists of the following files:
-
-   dvips
-      zpeu.map
-   pdftex
-      zpeu.pdfmap
-   tex
-      europs.dtx      europs.ins
-      eutest.ps       eutest.tex
-   tfm
-      zpeub.tfm       zpeubi.tfm      zpeubis.tfm      zpeubit.tfm
-      zpeubs.tfm      zpeubt.tfm      zpeur.tfm        zpeuri.tfm
-      zpeuris.tfm     zpeurit.tfm     zpeurs.tfm       zpeurt.tfm
-
-Install the tfm files in the appropriate place, depending on your TeX version.
-
-You will need the Type 1 files from Adobe. For legal reasons they cannot be
-included in this package. You have to fetch them personally, e.g. from
-
-   http://www.adobe.com/type/eurofont.html
-
-or
-
-   ftp://ftp.adobe.com/pub/adobe/type/win/all/eurofont.exe
-   ftp://ftp.adobe.com/pub/adobe/type/mac/all/eurofont.sea.hqx
-
-You can either unpack one of these archives on an appropriate computer, or
-you can use the freely distributable "unzip" to extract the files from the
-file "eurofont.exe". Once you've done this, you have to rename the fonts
-according to the table shown above, i.e. _1______.PFB is renamed to
-zpeurs.pfb, and so on. If you have downloaded and unpacked the Macintosh
-archive, you have to extract the POST part from the resource fork of the
-fonts. This can e.g. be done with the program "macfont". It is available
-at your nearest CTAN mirror. Once you got the PFB files, put them into the
-type1 directory of your TeX installation.
-
-Append(!!) zpeu.map to psfonts.map, and, if you are using pdfTeX, zpeu.pdfmap
-to the appropriate mapping file, so that dvips and pdfTeX know how to handle
-these fonts. Note: dvips prior to 5.80 has problems with partial font
-downloading in general, and with Adobe's Euro fonts in particular. You can
-say "dvips -j0 ..." to switch off partial font downloading completely, but
-this may increase the size of the generated PostScript file. You should
-really get the most recent version of dvips, which can be found at
-
-   http://www.radicaleye.com/
-
-Most TeX distributions include new versions of the individual programs quite
-fast, so you may want to check your distribution for a recent version of
-dvips.
-
-Process europs.ins with TeX or LaTeX. This will produce a style file and
-three font definition files. Move them to a place where LaTeX can find them.
-
-Now you should be able to use the Euro currency symbol.
-
-
-4. Bugs
--------
-
-Probably many. If you find one, or want a feature to be added, please contact
-
-   Joern Clausen
-   University of Bielefeld, Faculty of Technology
-   joern@TechFak.Uni-Bielfeld.DE
diff --git a/Master/texmf-dist/doc/fonts/eurofont/README.eurosans b/Master/texmf-dist/doc/fonts/eurofont/README.eurosans
deleted file mode 100644
index e20363f1556..00000000000
--- a/Master/texmf-dist/doc/fonts/eurofont/README.eurosans
+++ /dev/null
@@ -1,149 +0,0 @@
-============================================================
-                 The LaTeX package eurosans
-                        version 3.0
-============================================================
-                                              Walter Schmidt
-                                               was@VR-Web.de
-                                                  2002-01-09
-
-Usage
------
-The LaTeX package "eurosans" provides a convenient LaTeX
-interface for the free Adobe Euro symbol fonts in Type 1
-(PostScript) format.  Loading of the package
-
-  \usepackage{eurosans}
-  
-provides a new command
-
-  \euro
-  
-which typesets an Euro symbol.  The weight (medium or
-boldface), shape (upright or oblique) and width (regular or
-condensed) varies according to the font currently selected.
-The symbol blends well with most typefaces, except for
-typewriter fonts.  The medium/upright/regular variant meets
-the official design by the EC.
-
-The Euro Fonts can be scaled, in order to match the other
-fonts in the document, by loading the package with the
-option [scaled=...].  For instance, to use the Euro fonts at
-90% of their `natural' size:
-
-  \usepackage[scaled=0.9]{eurosans}
-
-The eurosans package requires the package keyval.sty, which
-is part of the `graphics' bundle and should be available
-with any decent LaTeX system.
-
-
-
-The font family "eurosans"
---------------------------
-The command \euro switches to a particular font family named
-"eurosans", which is set up with the encoding "U" only.
-
-NFSS classification:
-
-  series   shapes      PostScript FontName
-  --------------------------------------------------------
-  m        n,it,sl     EuroSans-Regular, EuroSans-Italic
-  b,bx     n,it,sl     EuroSans-Bold, EuroSans-BoldItalic
-  mc       n,it,sl     EuroMono-Regular, EuroMono-Italic
-  sbc,bc   n,it,sl     EuroMono-Bold, EuroMono-BoldItalic         
-
-(The EuroMono typefaces are actually condensed versions of
-EuroSans.)
-
-
-
-Obtaning and installing the Euro Fonts
---------------------------------------
-
-(1) Install the font metrics (.tfm files), to be found in
-the CTAN directory fonts/euro/tfm.
-
-(2) Install a font map file for dvips, pdfTeX etc, to be found
-in the CTAN directory fonts/euro/dvips.
-
-A font map file and the .tfm files for the Euro fonts may
-already be provided in your TeX system, so that you need not
-install them manually; please, consult its documentation!
-
-(3) Due to legal reasons, the actual Type1 fonts (.pfb and
-.afm files) are _not_ distributed from CTAN.  They can be
-obtained from free from Adobe:
-
-  <http://www.adobe.com/type/eurofont.html>
-  
-You will receive a self-extracting archive "eurofont.exe" for
-DOS/Win, which can be unpacked using Info-Zip's "unzip"
-program, too.  The archive file can also be downloaded
-immediately:
-
-  ftp://ftp.adobe.com/pub/adobe/type/win/all/eurofont.exe
-  ftp://ftp-pac.adobe.com/pub/adobe/type/win/all/eurofont.exe
-
-(4) Move the .pfb and .afm files from the archive to a
-suitable directory of your TeX system.  When using the map
-file "zpeu.map", you also have to rename the files as
-follows:
-
-  _1______.PFB  ->  zpeurs.pfb
-  _1B_____.PFB  ->  zpeubs.pfb
-  _1I_____.PFB  ->  zpeuris.pfb
-  _1BI____.PFB  ->  zpeubis.pfb
-  _2______.PFB  ->  zpeurt.pfb
-  _2B_____.PFB  ->  zpeubt.pfb
-  _2I_____.PFB  ->  zpeurit.pfb
-  _2BI____.PFB  ->  zpeubit.pfb
-  _3______.PFB  ->  zpeur.pfb
-  _3B_____.PFB  ->  zpeub.pfb
-  _3I_____.PFB  ->  zpeuri.pfb
-  _3BI____.PFB  ->  zpeubi.pfb
-
-...and ditto for the .AFM files!
-
-When using the map file "zpeu-origname.map", you need NOT
-rename the files; however, on Unix you should make sure that
-the names are lower case.
-
-
-
-Known problems
---------------
-With dvips prior to version 5.83, partial font downloading
-will fail with an error message like this one:
-
-  File <_1bi____.pfb> ended before all chars have been found
-  We scan 0 Chars from 226
-  Lst seen token was '/Euro'
-
-Partial font downloading can be turned off by calling dvips
-with the option -j0 or by specifying j0 in the dvips
-configuration file.
-
-This bug has been fixed with dvips version 5.83.
-
-
-
-History
--------
-v3.0 2002-01-09
-  optional scaling 
-  
-v2.1 2000-06-15
-  the EuroMono fonts are used for the condensed series
-  
-v2.0 1999-07-21
-  changed the font names acording to "Karl Berry" scheme
-  
-v1.0 1999-01-19
-  \euro is now robust; 
-  documentation update
-
-v0.9 1998-11-09 
-  first public version
-
-
--- finis
diff --git a/Master/texmf-dist/doc/fonts/eurofont/dvidrive.txt b/Master/texmf-dist/doc/fonts/eurofont/dvidrive.txt
deleted file mode 100644
index 05bb1bb5013..00000000000
--- a/Master/texmf-dist/doc/fonts/eurofont/dvidrive.txt
+++ /dev/null
@@ -1,189 +0,0 @@
-%% LaTeX2e file `dvidrive.txt'
-%% generated by the `filecontents' environment
-%% from source `eurofont' on 1999/02/02.
-%%
-File dvidrive.txt
-Copyright 1998 Rowland McDonnell
-email rebecca@astrid.u-net.com
-
-
-This file contains information on how to configure dvips and OzTeX to use
-Adobe's Eurofonts and the Marvosym fount.  I believe that pdfTeX can use
-dvips entries.
-
-If there are any problems with the information below, or if you have
-information on how to configure other dvi drivers, please let me know by
-emailing: rebecca@astrid.u-net.com
-
-
-DVI DRIVER CONFIGURATION LINES FOR ADOBE'S EUROFONTS
-====================================================
-
-Note that versions of dvips before v5.83 have trouble doing partial fount
-downloading with Adobe's Eurofonts. Because of this, I have listed the
-dvips psfont.map entries with `|<<|' and with `|<|': the `|<<|'
-entries prevent dvips attempting to do partial fount downloading with
-that particular fount.
-
-The `<<' syntax does not work with all versions of dvips; it does work
-with dvips v5.78, but doesn't work with v5.70. If you're using a pre
-`<<' dvips, you should use the entries with `<' and don't use partial
-fount downloading with any document containing Adobe's Eurofonts;
-passing the -j0 switch to dvips will prevent it from doing partial
-fount downloading if this is normally turned on.
-
-I've asked the author of dvips when the `<<' syntax was first
-introduced, and he can't remember.
-
-I am told that pdftex can do partial fount downloading using Adobe's
-Eurofonts.
-
-Eurofont configuration lines for Windows/Unix/any others?
-=========================================================
-
-(you need to re-name the *.PFB files *.pfb; thanks to Stefan Ulrich
-<ulrich@cis.uni-muenchen.de> for this and the following entries)
-
-
-psfonts.map entries for Windows/Unix/other
-dvips v5.78 or similar
-
-zpeurs  EuroSans-Regular     <<_1______.pfb
-zpeubs  EuroSans-Bold        <<_1B_____.pfb
-zpeuris EuroSans-Italic      <<_1I_____.pfb
-zpeubis EuroSans-BoldItalic  <<_1BI____.pfb
-zpeurt  EuroMono-Regular     <<_2______.pfb
-zpeubt  EuroMono-Bold        <<_2B_____.pfb
-zpeurit EuroMono-Italic      <<_2I_____.pfb
-zpeubit EuroMono-BoldItalic  <<_2BI____.pfb
-zpeur   EuroSerif-Regular    <<_3______.pfb
-zpeub   EuroSerif-Bold       <<_3B_____.pfb
-zpeuri  EuroSerif-Italic     <<_3I_____.pfb
-zpeubi  EuroSerif-BoldItalic <<_3BI____.pfb
-
-
-psfonts.map entries for Windows/Unix/other
-dvips v5.70 or before, dvips v5.83 and above, and pdftex:
-
-(note that I don't use pdftex; this suggestion might not work)
-
-zpeurs  EuroSans-Regular     <_1______.pfb
-zpeubs  EuroSans-Bold        <_1B_____.pfb
-zpeuris EuroSans-Italic      <_1I_____.pfb
-zpeubis EuroSans-BoldItalic  <_1BI____.pfb
-zpeurt  EuroMono-Regular     <_2______.pfb
-zpeubt  EuroMono-Bold        <_2B_____.pfb
-zpeurit EuroMono-Italic      <_2I_____.pfb
-zpeubit EuroMono-BoldItalic  <_2BI____.pfb
-zpeur   EuroSerif-Regular    <_3______.pfb
-zpeub   EuroSerif-Bold       <_3B_____.pfb
-zpeuri  EuroSerif-Italic     <_3I_____.pfb
-zpeubi  EuroSerif-BoldItalic <_3BI____.pfb
-
-
-Eurofont configuration lines for Macs
-=====================================
-
-
-Macintosh psfonts.map entries for dvips v5.78 or similar
-
-zpeur   EuroSerif-Regular     <<EuroSerReg
-zpeuri  EuroSerif-Italic      <<EuroSerIta
-zpeub   EuroSerif-Bold        <<EuroSerBol
-zpeubi  EuroSerif-BoldItalic  <<EuroSerBolIta
-zpeurs  EuroSans-Regular      <<EuroSanReg
-zpeuris EuroSans-Italic       <<EuroSanIta
-zpeubs  EuroSans-Bold         <<EuroSanBol
-zpeubis EuroSans-BoldItalic   <<EuroSanBolIta
-zpeurt  EuroMono-Regular      <<EuroMonReg
-zpeurit EuroMono-Italic       <<EuroMonIta
-zpeubt  EuroMono-Bold         <<EuroMonBol
-zpeubit EuroMono-BoldItalic   <<EuroMonBolIta
-
-
-Macintosh psfonts.map entries for
-dvips v5.70 or before, dvips v5.83 and above, and pdftex:
-
-(note that I don't use pdftex; this suggestion might not work)
-
-zpeur   EuroSerif-Regular     <EuroSerReg
-zpeuri  EuroSerif-Italic      <EuroSerIta
-zpeub   EuroSerif-Bold        <EuroSerBol
-zpeubi  EuroSerif-BoldItalic  <EuroSerBolIta
-zpeurs  EuroSans-Regular      <EuroSanReg
-zpeuris EuroSans-Italic       <EuroSanIta
-zpeubs  EuroSans-Bold         <EuroSanBol
-zpeubis EuroSans-BoldItalic   <EuroSanBolIta
-zpeurt  EuroMono-Regular      <EuroMonReg
-zpeurit EuroMono-Italic       <EuroMonIta
-zpeubt  EuroMono-Bold         <EuroMonBol
-zpeubit EuroMono-BoldItalic   <EuroMonBolIta
-
-
-OzTeX config file entries
-
-zpeur     EuroSerif-Regular        "Euro Serif"                  nil
-zpeuri    EuroSerif-Italic         "Euro Serif"                  nil i
-zpeub     EuroSerif-Bold           "Euro Serif"                  nil b
-zpeubi    EuroSerif-BoldItalic     "Euro Serif"                  nil bi
-zpeurs    EuroSans-Regular         "Euro Sans"                   nil
-zpeuris   EuroSans-Italic          "Euro Sans"                   nil i
-zpeubs    EuroSans-Bold            "Euro Sans"                   nil b
-zpeubis   EuroSans-BoldItalic      "Euro Sans"                   nil bi
-zpeurt    EuroMono-Regular         "Euro Monospace"              nil
-zpeurit   EuroMono-Italic          "Euro Monospace"              nil i
-zpeubt    EuroMono-Bold            "Euro Monospace"              nil b
-zpeubit   EuroMono-BoldItalic      "Euro Monospace"              nil bi
-
-
-DVI DRIVER CONFIGURATION LINES FOR MARVOSYM
-===========================================
-
-Here are some lines to configure dvips to use the Marvosym fount:
-
-Dvips psfonts.map entries for the original Marvosym fount:
-
-fmvr8x  Martin_Vogels_Symbole                   <marvosym.pfb
-fmvri8x Martin_Vogels_Symbole " .167 SlantFont" <marvosym.pfb
-
-
-Dvips psfonts.map entries for the Y&Y `ATM compatible'
-re-worked Marvosym fount:
-
-fmvr8x   Marvosym                    <marvosym.pfb
-fmvri8x  Marvosym " .167 SlantFont"  <marvosym.pfb
-
-
-I have assumed that all dvi drivers that can use PostScript Type 1
-founts can also produce fake italic founts by slanting an upright
-version. Because of this, I have made no provision for dvi drivers
-that can't do this. If you have a dvi driver that can't fake an
-italic, please let me know and I'll modify the eurofont package to
-take this into account, probably by adding another option and writing
-a new fd file.
-
-Note for Macintosh users
-
-A Mac version of the Marvosym fount has been created in PostScript Type 1
-and TrueType versions. It uses the Y&Y names as above, and these lines are
-be needed for dvips's psfonts.map file:
-
-fmvr8x   Marvosym                    <Marvo
-fmvri8x  Marvosym " .167 SlantFont"  <Marvo
-
-And these lines for OzTeX's default config file:
-
-fmvr8x    Marvosym     Marvosym     nil
-fmvri8x   Marvosym     Marvosym     nil i
-
-
-If a version of the original Marvosym fount is ever released for Macs,
-these  lines will be needed for dvips's psfonts.map file:
-
-fmvr8x  Martin_Vogels_Symbole                   <MartiVogSym
-fmvri8x Martin_Vogels_Symbole " .167 SlantFont" <MartiVogSym
-
-And these lines for OzTeX's default config file:
-
-fmvr8x    MartiVogSym  "Martin Vogels Symbole"       nil
-fmvri8x   MartiVogSym  "Martin Vogels Symbole"       nil i
diff --git a/Master/texmf-dist/doc/fonts/eurofont/eurofont.dtx b/Master/texmf-dist/doc/fonts/eurofont/eurofont.dtx
deleted file mode 100644
index 57800578f5f..00000000000
--- a/Master/texmf-dist/doc/fonts/eurofont/eurofont.dtx
+++ /dev/null
@@ -1,4148 +0,0 @@
-%%\iffalse
-%% File eurofont.sty
-%% copyright Rowland McDonnell 1998
-%% email rebecca@astrid.u-net.com
-%%\This file is part of the eurofont distribution.  You can distribute it 
-%% freely provided that you include the rest of the eurofont distribution 
-%% with this file and make no more than a nominal charge to cover the 
-%% costs of distributing it.
-%%
-%% If you would like to change the contents of this file, please make a 
-%% copy of it under a different name and change that instead. Keep my 
-%% copyright notice attached, but make it clear that the new file is your 
-%% responsibility so you get the credit for the improvements and I don't 
-%% get blamed for the bugs.
-%
-% Remove \OnlyDescription to get the code typeset.
-%
-% Note to me: comment out \OnlyDescription to get the checksum right, 
-% and then uncomment it.  Maybe.
-% 
-%\fi
-%\iffalse
-%<*driver>
-\documentclass[a4paper,10pt]{ltxdoc}
-\usepackage{tabularx,varioref,xspace}
-\usepackage[OT1]{fontenc}
-% \OnlyDescription
-\begin{document}
- \DocInput{eurofont.dtx}
-\end{document}
-%</driver>
-%\fi
-%\iffalse
-%<*package>
-%\fi
-%% \CheckSum{1267}
-%% \CharacterTable
-%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
-%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
-%%   Digits        \0\1\2\3\4\5\6\7\8\9
-%%   Exclamation   \!     Double quote  \"     Hash (number) \#
-%%   Dollar        \$     Percent       \%     Ampersand     \&
-%%   Acute accent  \'     Left paren    \(     Right paren   \)
-%%   Asterisk      \*     Plus          \+     Comma         \,
-%%   Minus         \-     Point         \.     Solidus       \/
-%%   Colon         \:     Semicolon     \;     Less than     \<
-%%   Equals        \=     Greater than  \>     Question mark \?
-%%   Commercial at \@     Left bracket  \[     Backslash     \\
-%%   Right bracket \]     Circumflex    \^     Underscore    \_
-%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
-%%   Right brace   \}     Tilde         \~}
-%
-% \author{Rowland McDonnell\\ \texttt{rebecca@astrid.u-net.com}}
-% \title{The \packname{eurofont} package v1.1.3}
-% \date{30th January 1999}
-% 
-% \newcommand*{\packname}[1]{{\sffamily #1}}
-% \newcommand*{\classname}[1]{{\ttfamily #1}}
-% \newcommand*{\optname}[1]{{\ttfamily #1}}
-% \newcommand*{\lfntname}[1]{{\ttfamily #1}}
-% \newcommand*{\filename}[1]{{\ttfamily #1}}
-% \DeclareRobustCommand*{\filename}[1]{{\ttfamily#1}}
-% \newcommand*{\OzTeX}{O\kern-.03em z\kern-.15em\TeX}
-% \newcommand{\PS}{PostScript\xspace}
-% \newcommand{\dvidriver}{dvi driver\xspace}
-% \newcommand{\Dvidriver}{Dvi driver\xspace}
-%
-%\makeatletter
-%\iffalse
-% The instances of ^^A are `real' comment characters to suppress the 
-% end-of-line space in the middle of the command definitions.
-%\fi
-%
-%\newcommand{\ttlb}{{\ttfamily\def\@tempcmda{OT1}^^A
-%\ifx\f@encoding\@tempcmda\char"7B\else\{\fi}}
-%
-%\newcommand{\ttrb}{{\ttfamily\def\@tempcmda{OT1}^^A
-%\ifx\f@encoding\@tempcmda\char"7D\else\}\fi}}
-%
-%\newcommand{\ttbs}{{\ttfamily\def\@tempcmda{OT1}^^A
-%\ifx\f@encoding\@tempcmda\char`\\\else\textbackslash\fi}}
-% 
-%\newcommand*{\comname}[2][VF500F2E]{{\ttfamily\ttbs #2^^A
-%\def\@tempcmda{VF500F2E}\def\@tempcmdb{#1}^^A
-%\ifx\@tempcmda\@tempcmdb\else\comarg{#1}\fi}}
-%
-%\newcommand*{\comarg}[1]{{\ttfamily\ttlb$\langle$^^A
-%{\rmfamily\itshape#1}\/$\rangle$\ttrb}}
-%
-%\newcommand*{\comoptarg}[1]{{\ttfamily[$\langle$^^A
-%{\rmfamily\itshape#1}\/$\rangle$]}}
-%
-%\makeatother
-%
-% \maketitle
-% 
-% \tableofcontents
-%
-% \section{Introduction}
-%  
-% The \packname{eurofont} package was written to do two complementary 
-% jobs: firstly, to automate the process of using a euro symbol from any 
-% source in any fount\footnote{I am one of the last people in the world 
-% to use this spelling of the word to refer to `a set of type in one 
-% size and style'.}; secondly, to generate a `faked' euro symbol from a C 
-% with two lines across it, which can be used automatically when no 
-% suitable real euro symbol exists.
-% 
-% Despite the name, the \packname{eurofont} package does not itself 
-% have a fount containing euro symbols: it's meant to help you use 
-% founts with euro symbols.
-% 
-% The \packname{eurofont} package defines two commands meant to be used 
-% in documents: the \comname{euro} command which prints a euro symbol, 
-% and the \comname[amount]{euros} command which prints a euro symbol 
-% next to its argument -- normally a number -- with a small space in 
-% between the two. The particular euro symbol printed depends on the way 
-% \packname{eurofont} has been set up: the decision made is based on the 
-% fount in use at the time you use the command. The \comname{euros} 
-% command uses the \comname{euro} command to print the euro symbol, so 
-% these commands print the same symbol under the same circumstances.
-% 
-% There are several ways of controlling which particular euro symbol you 
-% get with any given fount; the idea is that -- with a bit of luck -- 
-% most users won't need to do anything more complicated than passing 
-% options to \packname{eurofont} and making minor changes to the 
-% configuration file, \filename{eurofont.cfg}.
-% 
-% Note for \OzTeX\ users (and perhaps others): throughout this document, 
-% I refer to the standard set of \PS Type 1 founts (Times, Helvetica, 
-% Courier, etc). If, like me, you use TrueType versions of Times, 
-% Palatino, etc., instead of \PS Type 1 versions, the difference doesn't 
-% matter.
-% 
-% This is the second public release of the \packname{eurofont} package; 
-% as I had expected, at least one bug did escape my notice in the first 
-% release (it was a problem with the advice given on configuring dvips). 
-% I've fixed the problem reported, but there's probably a few more bugs 
-% lurking in the package; if you do spot any bugs, have any trouble with 
-% the documentation, you'd like to tell me how to configure the 
-% \dvidriver \emph{you} use (I'd love to hear from Amiga or Archimedes 
-% \TeX\ users in particular), or you'd just like to make a comment or 
-% suggestion about the \packname{eurofont} package, I'd appreciate an 
-% email at: |rebecca@astrid.u-net.com|.
-% 
-% \subsection{What else do I need?}
-% 
-% The only thing you must have to use the \packname{eurofont} package is 
-% a working \LaTeX2e\ installation. This package has only been tested 
-% with the June 1998 release of \LaTeX2e, but will probably work 
-% correctly with earlier versions. \packname{Eurofont} will not work 
-% with \LaTeX~2.09.
-% 
-% The \packname{eurofont} package can be configured to produce useful 
-% euro symbols in the absence of any founts containing real euro 
-% symbols, but you will need to edit the configuration file if you want 
-% this; an introduction to configuring this package can be found in 
-% section~\vref{sec:config_intro}.
-% 
-% In its default configuration, \packname{eurofont} expects to find 
-% Adobe's Eurofonts installed. If you want to avoid these, you can pass 
-% the \optname{marvosym} option to \packname{eurofont} and it'll expect 
-% the Marvosym fount instead. Adobe's Eurofonts have italic, bold, and 
-% bold italic variants which Marvosym lacks.
-% 
-% Both Marvosym and the Eurofonts are \PS Type 1 founts: you can use 
-% them if you have a \PS printer, ATM (Adobe Type Manager), or a \PS 
-% emulator like Ghostscript. Section~\vref{sec:getPSfounts} has more on 
-% these founts and how to get them.
-% 
-% The \packname{eurosym} and \packname{China2e} packages both have euro 
-% symbols in Metafont format which can be used by \packname{eurofont}. 
-% You'll get \packname{eurosym}'s euro symbol if you pass the 
-% \optname{eurosym} option to \packname{eurofont} -- this gives you 
-% \packname{eurosym}'s euro symbol instead of Adobe's Eurofonts or 
-% Marvosym's euro symbols, and also replaces the euro symbols you get 
-% with the Computer Modern founts. You will need to edit the 
-% configuration file if you want to use the euro symbol from the China2e 
-% fount.
-% 
-% 
-% \subsection{How to install the package -- in brief}
-% 
-% \begin{enumerate}
-% \item Run \LaTeX\ on \filename{eurofont.ins}.
-% \item Put \filename{eurofont.sty}, \filename{eurofont.cfg}, and all 
-% the files ending in \filename{.fd} into a directory on your 
-% tex-inputs search path.
-% \item (optional) Get and install Adobe's Eurofonts, and/or the 
-% marvosym fount, and/or the \packname{China2e} package, and/or the EC 
-% founts (the T1 encoded re-working of the original Computer Modern 
-% founts), and/or the \packname{Eurosym} package. See 
-% section~\vref{sec:getfounts} for details.
-% \item (optional) If you want to use Adobe's Eurofont's, put the 
-% \filename{zpeu...tfm} files into a directory on your tex-fonts search 
-% path, and the \filename{zpeu...vf} files into a directory on your vf 
-% (virtual founts) search path.
-% \item (optional) If you intend to use the marvosym fount, put one 
-% of the two files \filename{fmvri8x.tfm} into a directory on your 
-% tex-fonts search path; put it with the file \filename{fmvr8x.tfm} that 
-% comes with the \packname{marvosym} distribution.
-% \item (optional) Copy the appropriate lines from 
-% \filename{dvidrive.txt} to the appropriate file on your system to 
-% configure your \dvidriver to use marvosym and/or Adobe's Eurofonts. 
-% This procedure is also covered in section~\vref{sec:dvidriver_config}.
-% \item (optional) Modify the file \filename{eurofont.cfg} as you like.
-% \end{enumerate}
-% 
-% \subsection{How to use the package -- a brief introduction}
-% 
-% This is how to use \packname{eurofont} in your document:
-%\begin{verbatim}
-%    \documentclass[a4paper]{article}
-%      \usepackage{eurofont}
-%      \begin{document}
-%        The euro symbol looks like this: \euro.  A sum of money can
-%        be written like this: \euros{500}.
-%      \end{document}
-%\end{verbatim}
-% The \comname{euro} command prints the euro symbol; the \comname{euros} 
-% command is meant to be used to typeset a sum of money in euros: it 
-% prints the euro symbol to the left (by default) of its argument, with 
-% a small amount of space between the symbol and the text of the 
-% argument. If you give the \packname{eurofont} package the 
-% \optname{right} option, the euro symbol will be on the right.
-% 
-% The \packname{eurofont} package's default setup assumes that you've 
-% got Adobe's Eurofonts installed. If you want use to euro symbols from 
-% the Marvosym fount instead, use the \optname{marvosym} option:
-%\begin{verbatim}
-%    \usepackage[marvosym]{eurofont}
-%\end{verbatim}
-% 
-% The next question is: what do you get when you use the \comname{euro} 
-% or \comname{euros} command? The \packname{eurofont} package decides 
-% which euro symbol to use depending on the fount in use at the place 
-% where the \comname{euro} command is encountered.  The way the package 
-% is set up initially, you get this:
-% \begin{itemize}
-% \item All bar one of the `standard' set of \PS founts get a 
-% euro symbol from one of Adobe's Eurofonts: Bookman, Times, Palatino, New 
-% Century Schoolbook, and Utopia use Euroserif; Avant Garde, Helvetica, 
-% Symbol, and Zapf Dingbats use Eurosans; and Courier uses Euromono.
-% \item Zapf Chancery (the one exception) uses a euro symbol faked with 
-% medium rules.
-% \item Each of the three Computer Modern text fount families (Computer 
-% Modern Roman, Computer Modern Sanserif, and Computer Modern 
-% Typewriter (\lfntname{cmr}, \lfntname{cmss}, and \lfntname{cmtt}) uses 
-% either the appropriate euro symbol from the matching `text companion' (TC) 
-% fount (if installed); or, if the TC founts appear to be missing, 
-% \packname{eurofont} will print a faked euro symbol instead.
-% \item Everything else gets a euro symbol faked with medium weight 
-% rules.
-% \end{itemize}
-% The \optname{marvosym} option tells \packname{eurofont} to use the 
-% Marvosym fount's euro symbols in place of Adobe's Eurofonts.
-% 
-% The faked euro symbols I refer to above are euro symbols produced by 
-% superimposing a pair of horizontal lines over a letter `C'.  The 
-% result can be surprisingly tolerable in some cases.
-% 
-% \subsubsection{Options}
-% 
-% This is my best guess at the options most new users are likely to 
-% want to know about first, not a full list of all the options -- you 
-% can find that in section~\vref{sec:all_options}.
-% \begin{description}
-% \item[\optname{left}] This option makes the \comname{euros} command 
-% print the euro symbol to the left of its argument, which is normally a 
-% number; the \comname{euros} command is meant for typesetting sums of 
-% money. This is the default behaviour.
-% 
-% \item[\optname{right}] This option makes the \comname{euros} command 
-% print the euro symbol to the right of its argument, which is normally 
-% a number; the \comname{euros} command is meant for typesetting sums of 
-% money.
-% 
-% \item[\optname{marvosym}] This option tells \packname{eurofont} to use 
-% the Marvosym fount's euro symbols for the standard set of \PS 
-% Type 1 founts. The \packname{eurofont} package automatically fakes a 
-% bold version when needed, and you'll also get a decent faked 
-% italic/slanted version if your \dvidriver can slant a fount.
-% 
-% \item[\optname{eurosym}] This option tells \packname{eurofont} to use 
-% the \packname{eurosym} package's euro symbol for the Computer Modern 
-% families and for the standard set of \PS Type 1 founts. If the 
-% \packname{eurosym} package isn't available, \packname{eurofont} 
-% complains and all euro symbols are created using the normal 
-% \packname{eurofont} code for printing faked euro symbols.
-% \end{description}
-% 
-% \subsection{Some founts with euro symbols}\label{sec:someeurofounts}
-% 
-% It's a good idea to get some founts containing the euro symbol. 
-% Section~\vref{sec:getfounts} has more details of some freely available 
-% founts. In brief, the founts with euro symbols in that I know about are:
-% \begin{center}
-% \begin{tabularx}{\textwidth}{@{}ll>{\raggedright\arraybackslash}X@{}}
-% \textbf{Fount}  & \textbf{Format}  & \textbf{Notes} \\[1ex]
-% Adobe Eurofonts & PS Type 1        & Seriffed, sanserif, and 
-%                                      monospaced all in upright,
-%                                      italic, bold, and bold italic\\
-% Marvosym        & pfa and pfb only & Seriffed, sanserif, and monospaced 
-%                                      in upright medium only\\[0.5ex]
-% China2e         & Metafont         & A single beautiful upright euro 
-%                                      symbol \\[0.5ex]
-% Eurosym         & Metafont         & The official euro and an 
-%                                      alternative approach to printing a 
-%                                      faked euro\\[0.5ex]
-% Text Companion  & Metafont         & Founts containing extra 
-%                                      symbols that come with the T1 
-%                                      encoded version of the Computer
-%                                      Modern founts \\
-% \end{tabularx}
-% \end{center}
-% If you know of other founts containing euro symbols that are used 
-% with \LaTeX\, do please let me know and I'll add them to this list.
-% 
-% The \packname{china2e} and \packname{marvosym} packages come with 
-% founts in one shape and weight only: medium upright. Despite this, the 
-% \packname{eurofont} package will print what looks like a bold euro symbol 
-% from either fount, and can (with a bit of help from your \dvidriver) 
-% also manage italic and bold italic euro symbols from \packname{marvosym}.
-% 
-% The way it works is this: \packname{eurofont} comes with two 
-% \filename{tfm} files -- both called \filename{fmvri8x.tfm} -- for a 
-% slanted version of the Marvosym fount\footnote{Use the \filename{tfm} 
-% file from the \filename{original} directory if you're using the 
-% original version of Marvosym (the \filename{pfa} or \filename{pfb} 
-% files from CTAN or the TrueType version from Martin Vogel's Web site); 
-% and use the \filename{tfm} file from the \filename{yandy} folder if 
-% you're using the Y\&Y version of Marvosym -- either downloaded from 
-% the Y\&Y Web site, or the Macintosh version from CTAN.}. This fount 
-% doesn't really exist, but some \dvidriver{}s can create a slanted 
-% fount from an upright one by leaning it to one side.
-% 
-% Assuming your \dvidriver can create a slanted fount (dvips can -- see 
-% section~\ref{sec:dvidriver_config:mvs} for more details), this extra 
-% \filename{tfm} file means you can use the Marvosym fount's euro 
-% symbols with slanted or italic founts: the results you get with this 
-% should be good enough for all practical purposes. \packname{Eurofont} 
-% also has two commands to print a `poor man's bold' version of a euro 
-% symbol; one of these is used automatically to print bold versions of 
-% the Marvosym or China2e euro symbols, which are missing bold variants. 
-% These poor man's bold commands print six copies of the requested 
-% symbol, each offset from the others by a very small amount in a 
-% hexagonal arrangement. There's a bit more detail in 
-% section~\vref{sec:howitworks:EFpmb}.
-% 
-% If you want to use the euro symbol from China2e, you could do worse 
-% than to read section~\vref{sec:config_intro}.
-% 
-% \subsection{How to change what you get -- a brief 
-% intro}\label{sec:config_intro}
-% 
-% The \packname{eurofont} package comes with a configuration file called 
-% \filename{eurofont.cfg}. The idea is that you can change this file as 
-% much as you like to meet your preferences.
-% 
-% But before diving in and changing anything, there are several options 
-% that can change what the package does. There's a brief description of 
-% some of them in section~\vref{sec:someeurofounts}, and 
-% section~\vref{sec:all_options} tells all.
-% 
-% The basic idea behind \packname{eurofont}'s \comname{euro} command is 
-% this: there are several lists which have their contents defined in the 
-% file \filename{eurofont.cfg}. When you use the \comname{euro} or 
-% \comname{euros} command, the current fount family is checked against 
-% each list in turn. If the fount family matches an entry in a list, 
-% then the command corresponding to that list is executed. This command 
-% prints a particular euro symbol. The first match you get decides which 
-% euro symbol you get: you can't get two euro symbols if one fount 
-% family is listed in, say, the \comname{chinaelist} and the 
-% \comname{seriflist}
-% 
-% So, for example, the fount family \lfntname{ptm} (Adobe Times) is 
-% listed in \comname{seriflist}. If you use the \comname{euro} command 
-% in the middle of some text typeset in Times, the command 
-% \comname{makeserifeuro} is executed, and you get a euro symbol from 
-% Adobe's Euroserif fount (by default, that is; if you've used the 
-% \optname{marvosym} option, you'll get Marvosym's seriffed euro 
-% symbol). I'll explain how to find out the internal fount family name 
-% of each fount in a bit.
-% 
-% The configuration file (\filename{eurofont.cfg}) contains this by 
-% default:
-%\begin{verbatim}
-%%
-%%    List contents                                Corresponding command
-%%
-%   \EFaddtolist{\userlist}{}%                     \makeusereuro
-%   \EFaddtolist{\texteurolist}{}%                 \maketexteuro
-%   \EFaddtolist{\chinaelist}{}%                   \makechinaeeuro
-%   \EFaddtolist{\cmlist}{cmr,cmss,cmtt}%          \makecmeuro
-%   \EFaddtolist{\seriflist}{pbk,pnc,ppl,ptm,put}% \makeserifeuro
-%   \EFaddtolist{\sanslist}{pag,phv,psy,pzd}%      \makesanseuro
-%   \EFaddtolist{\monolist}{pcr}%                  \makemonoeuro
-%   \EFaddtolist{\fakemediumlist}{pzc}%            \makefakemediumeuro
-%   \EFaddtolist{\fakelightlist}{}%                \makefakelighteuro
-%   \EFaddtolist{\fakeheavylist}{}%                \makefakeheavyeuro
-%\end{verbatim}
-% The lists are created at the start of the \packname{eurofont} 
-% package with nothing in them: the code above tells you 
-% the full story about what's in each list.  You can use the 
-% \comname{EFaddtolist} command anywhere after the \packname{eurofont} 
-% package has been loaded; you can use it in individual document 
-% preambles if you like, as well as in \filename{eurofont.cfg}.
-% 
-% Each fount in \LaTeX\ belongs to a fount family. For example, Bookman 
-% Roman, Bookman Italic, Bookman Bold, and Bookman Bold Italic are all 
-% different founts, but they belong to the Bookman family. This family 
-% has an internal \LaTeX\ name: \lfntname{pbk}. One way of discovering 
-% the name of a fount family is to use \packname{eurofont}'s 
-% \comname{showfontfamily} command in your document: it displays the 
-% internal name of the current fount family on the screen and in the log 
-% file.
-% 
-% Before going any further, remember this: each list is a list of fount 
-% family names. If you're using a fount family that's in a particular 
-% list, you get the euro symbol generated by the command corresponding 
-% to that list. Section~\vref{sec:fountfamilies} has more notes on 
-% \LaTeX\ fount families.
-% 
-% If, for example, you don't like the euro symbol that you get with 
-% Computer Modern Roman, and you'd rather have the euro symbol from 
-% China2e with Computer Modern Roman, you can do this by changing two lines.  
-% Where the configuration file says this:
-%\begin{verbatim}
-%    \EFaddtolist{\chinaelist}{}
-%    \EFaddtolist{\cmlist}{cmr,cmss,cmtt}
-%\end{verbatim}
-% you should change it to this:
-%\begin{verbatim}
-%    \EFaddtolist{\chinaelist}{cmr}
-%    \EFaddtolist{\cmrlist}{cmss,cmtt}
-%\end{verbatim}
-% 
-%    You might have a new \PS fount that you'd like to use Adobe's 
-% Euroserif euro symbol with. If that fount is, say, Monotype Joanna 
-% (fount family name \lfntname{mjo}), you can do this by adding 
-% \lfntname{mjo} to the \comname{seriflist}:
-%\begin{verbatim}
-%    \EFaddtolist{\seriflist}{pbk,pnc,ppl,ptm,put,mjo}
-%\end{verbatim}
-% 
-% Or you might be using (say) Bitstream Bernhard Modern (family name 
-% \lfntname{bb7}) which you might think doesn't go well with any of the 
-% real euro symbols on offer. You might prefer a euro symbol faked with 
-% light rules in this case. You can get this by saying:
-%\begin{verbatim}
-%    \EFaddtolist{\fakelightlist}{bb7}
-%\end{verbatim}
-% 
-% Then again, you might have a fount that has a real euro symbol in it: 
-% call it Adobe Xyzzy (\lfntname{pxy}) for the sake of argument. If this 
-% fount has been set up properly for use with \LaTeX, the euro symbol 
-% will be available using the \comname{texteuro} command. Rather than 
-% having to use a different command to select the euro symbol if you're 
-% using this fount family, you can say:
-%\begin{verbatim}
-%    \EFaddtolist{\texteurolist}{pxy}
-%\end{verbatim}
-% 
-% There are mechanisms that allow you to bypass the standard behaviours. 
-% You can, for example, use \comname{newcommand} in the configuration 
-% file to define any of the \comname{make...euro} commands to anything 
-% you like. You could, for example, say:
-%\begin{verbatim}
-%    \newcommand{\makesanseuro}
-%        {{\fontfamily{phv}\selectfont\makefakeeuro}}
-%\end{verbatim}
-% and all fount families in the \comname{sanseurolist} would have a euro 
-% symbol faked from a C in Helvetica with two rules drawn across it.
-% 
-% Alternatively, you could put a fount in \comname{usereurolist}, and 
-% you'd get a euro symbol generated by the \comname{makeusereuro} 
-% command. This is meant to be defined by you: by default, it prints a 
-% euro symbol faked with medium weight rules and displays on the screen a 
-% message explaining that you should have defined the 
-% \comname{makeusereuro} command to do what you want it to do.  For 
-% example, the following lines in the configuration file:
-%\begin{verbatim}
-%    \newcommand{\makeusereuro}
-%        {EUR}
-%\end{verbatim}
-% will give you `EUR' -- the standard international currency 
-% abbreviation for the euro currency unit -- for the euro symbol in all 
-% fount families listed in the \comname{usereurolist}.
-% 
-% \comname{usereurolist} is the first list looked at: if a fount 
-% family is listed in the \comname{usereurolist} as well as another 
-% list, what you get is the euro symbol produced by 
-% \comname{makeusereuro}.
-% 
-% Immediately after \comname{usereurolist} is examined, the 
-% \comname{euro} command looks to see if a command of the form 
-% \comname{<fam>euro} exists (where |<fam>| is the name of the 
-% current fount family). If it does, this command is executed and the 
-% \comname{euro} command finishes. For example, assume you've designed a 
-% euro symbol to match URW's Arnold Boecklin fount (family name 
-% \lfntname{uab}). Let's say you've written a command 
-% \comname{arnoldboecklineuro} to print this symbol. You could say this:
-%\begin{verbatim}
-%    \newcommand{\uabeuro}{\arnoldboecklineuro}
-%\end{verbatim}
-% and the \comname{euro} command would print your new euro symbol 
-% whenever you were using Arnold Boecklin.
-% 
-% \subsection{About this package and document}
-% 
-% The original aim of the \packname{eurofont} package was to provide a 
-% trivial interface to allow one to use the euro symbols from Adobe's 
-% Eurofonts with any fount. The package has grown a bit since the 
-% original idea, which might explain a few things. While their 
-% contributions to the final code might look small, this package 
-% couldn't have been started (let alone finished) without the help of 
-% Donald Arseneau and Stefan Ulrich (in alphabetical order, in case 
-% you're wondering).  They provided the list handling code which is at 
-% the heart of the package.
-% 
-% The biggest problem I had with this package was documenting it.  I've 
-% no idea whether or not the documentation has `hit the right note' -- 
-% if you've any comments at all to make about the documentation (or the 
-% package for that matter), do please email me and let me know what you 
-% think.  Comments, suggestions, and bug reports are all very much 
-% welcome.  To say that writing the documentation was a headache is 
-% putting it mildly.  If you read the documentation from start to 
-% finish, you'll notice that there's a certain amount of repetition.  
-% This is deliberate, and is meant to make it easier to use the 
-% documentation.
-% 
-% One problem that this package will face is that more and more founts 
-% containing euro symbols will appear as time goes on. With a bit of 
-% luck, it's flexible enough for you to be able to configure it to deal 
-% with these new founts. If not, or if you've had a thought about what 
-% might be done with one or more of these new founts, do please let me 
-% know by email -- if it's practical, it would be nice to modify this 
-% package to make it more useful.
-% 
-% \section{Installing the \packname{eurofont} package}
-% \label{sec:installation}
-% 
-% The \packname{eurofont} package proper comes in two files: 
-% \filename{eurofont.dtx} and \filename{eurofont.ins}.  Running 
-% \LaTeX\ on \filename{eurofont.dtx} produces this document, so I'll 
-% assume you've done that.  Running \LaTeX\ on \filename{eurofont.ins} 
-% generates:
-% \begin{center}
-% \begin{tabularx}{\textwidth}{@{}l>{\raggedright\arraybackslash}X@{}}
-% \filename{dvidrive.txt}& Information on configuring \dvidriver{}s to
-%                          use Adobe's Eurofonts and the Marvosym fount. \\
-% \filename{eurofont.cfg}& The configuration file: edit this file to change
-%                          \packname{eurofont}'s behaviour. \\
-% \filename{eurofont.sty}& The package file proper. \\
-% \filename{uzmvs.fd}    & \LaTeX\ code for selecting the Marvosym fount. \\
-% \filename{uzpeur.fd}   & \LaTeX\ code for selecting Adobe's Euroserif fount.\\
-% \filename{uzpeuss.fd}  & \LaTeX\ code for selecting Adobe's Eurosans fount.\\
-% \filename{uzpeutt.fd}  & \LaTeX\ code for selecting Adobe's Euromono fount.\\
-% \end{tabularx}
-% \end{center}
-% \filename{eurofont.cfg} and \filename{eurofont.sty} should be put in  
-% a directory on your tex-inputs search path: they're both essential.  
-% If you're using either Adobe's Eurofonts or the Marvosym fount, read 
-% \filename{dvidrive.txt}.  Once you've used it, you can discard it.
-% 
-% The \filename{fd} files are only needed if you're using the founts in 
-% question. What they're for is this: \TeX\ can only typeset text in a 
-% particular fount if it has a \filename{tfm} file corresponding to that 
-% fount to look at. \LaTeX\ \filename{fd} files contain code to select a 
-% \filename{tfm} file when you ask for a particular fount using \LaTeX\ 
-% commands. For example, you might ask for `U encoded Adobe Euroserif in 
-% bold italic'. \LaTeX\ would then look at the file 
-% \filename{uzpeur.fd}, and discover that this request corresponded to 
-% \filename{zpeubi.tfm}.
-% 
-% If you intend to use the Marvosym fount, put the file 
-% \filename{uzmvs.fd} into a directory on your tex-inputs search path. 
-% This file is named so that it won't clash with the original Marvosym 
-% fount definitions: you don't have to worry about the 
-% \packname{marvosym} package getting confused because the 
-% \packname{eurofont} package uses the \packname{marvosym} fount 
-% differently.
-% 
-% If you intend to use Adobe's Eurofonts, put the three 
-% \filename{uzpeu...fd} files into a directory on your tex-inputs search 
-% path. If you already have files with these names from a different 
-% source, I suggest that you replace the older files with the 
-% \filename{fd} files that come with \packname{eurofont}. If this causes 
-% any problems, please let me know by emailing 
-% \texttt{rebecca@astrid.u-net.com}.
-% 
-% \subsection{Using Marvosym and Adobe's Eurofonts}
-% 
-% How to get these founts is covered in section~\vref{sec:getfounts}. To 
-% use them with the \packname{eurofont} package, you need to install the 
-% appropriate \filename{fd} files and configure your \dvidriver, as 
-% explained above. Assuming you have installed the actual fount files on 
-% your computer, you then need \filename{tfm} files for these founts: 
-% these are the files that tells \TeX\ exactly what size each letter is, 
-% and allows it to produce output with a given fount.
-% 
-% The \packname{eurofont} package comes with suitable \filename{tfm} 
-% files for Adobe's Eurofonts, and two extra \filename{tfm} files for 
-% the Marvosym fount. Which of these two \filename{tfm} files you should 
-% use depends on which version of the Marvosym fount you have.
-% 
-% \subsubsection{Using Adobe's Eurofonts}
-% 
-% If you intend to use Adobe's Eurofonts, you should put all 12 files in 
-% the \filename{adobeuro/tfmfiles/} directory into a tex-fonts 
-% directory. These files should exist happily alongside any other 
-% \filename{tfm} files generated for Adobe's Eurofonts: being generated 
-% by \packname{afm2tfm}, they should be identical to any others you 
-% might have. I suggest that you remove any other \filename{tfm} files 
-% you might have for these founts unless you know that you need to keep 
-% them installed. If this advice causes you any problems, please email 
-% me and let me know.
-% 
-% \subsubsection{Using the Marvosym fount}
-%
-% The Marvosym fount comes with a \filename{tfm} file of its own, and 
-% the \packname{eurofont} package includes two extra \filename{tfm} 
-% files: you should use one of these to allow you access to a faked 
-% italic/slanted version of Marvosym, assuming that your \dvidriver can 
-% produce a faked italic by slanting an upright fount. Both dvips and 
-% \OzTeX\ can do this.
-% 
-% If you are using a version of the original Marvosym fount (the 
-% original \filename{pfa} or \filename{pfb} files from CTAN, or the 
-% Truetype version from Martin Vogel's Web site), then you should take 
-% the file \filename{fmvri8x.tfm} from the directory 
-% \filename{marvosym/tfmfiles/original}, and put it in the same 
-% tex-fonts directory as the file \filename{fmvr8x.tfm} which came with 
-% the \packname{marvosym} package.
-% 
-% If you are using one of the ATM-compatible versions of the Marvosym 
-% fount from Y\&Y (either from Y\&Y's Web site or any of the Mac 
-% versions from CTAN), things are slightly more complicated. In this 
-% case, you might be using the Y\&Y supplied \filename{tfm} file 
-% \filename{marvosym.tfm} to use this fount. If so, leave 
-% \filename{marvosym.tfm} alone: take the files \filename{fmvr8x.tfm} 
-% and \filename{fmvri8x.tfm} from the directory 
-% \filename{marvosym/tfmfiles/yandy}, and put them in the tex-fonts 
-% directory which contains \filename{marvosym.tfm}. If you have changed 
-% the name of the Y\&Y supplied \filename{tfm} file to 
-% \filename{fmvr8x.tfm}, just add \filename{fmvri8x.tfm}.
-% 
-% Note that you should not use the file \filename{fmvr8x.tfm} supplied 
-% for the original Marvosym fount with any of the Y\&Y versions of 
-% Marvosym, or vice versa: the founts are very, very similar, but differ 
-% in tiny details which affect the metrics file very slightly. You 
-% should therefore use the \filename{tfm} file supplied with the 
-% particular fount you're using. If you're not sure of the source of the 
-% Marvosym \filename{tfm} file already installed on your computer, you 
-% might prefer to replace it with the appropriate version of 
-% \filename{fmvr8x.tfm} supplied with the \packname{eurofont} package.
-% 
-% The original \PS version of the Marvosym fount has the \PS name 
-% \texttt{Martin\_Vogels\_Symbole}, while the Y\&Y re-worked version has 
-% the \PS name \texttt{Marvosym}; this leads to different \dvidriver 
-% configuration file entries which should help you avoid any confusion 
-% over which version you've got.
-% 
-% \section{All the options}\label{sec:all_options}
-% 
-% Here are all of \packname{eurofont}'s options, presented in no 
-% particular order.
-% \begin{description}
-% \item[\optname{left}] This option makes the \comname{euros} command 
-% print the euro symbol to the left of its argument. When you use this 
-% option, it's also passed to the \packname{eurosym} package, so that 
-% \packname{eurosym}'s \comname{EUR} command will also print the euro 
-% symbol to the left of its argument. This is the default behaviour.
-% 
-% \item[\optname{right}] This option makes the \comname{euros} command 
-% print the euro symbol to the right of its argument.  When you use this 
-% option, it's also passed to the \packname{eurosym} package, so that 
-% \packname{eurosym}'s \comname{EUR} command will also print the euro 
-% symbol to the right of its argument. 
-% 
-% \item[\optname{marvosym}] This option tells \packname{eurofont} to use 
-% the Marvosym fount's euro symbols for the standard set of \PS 
-% Type 1 founts. The \packname{eurofont} package automatically fakes a 
-% bold version when needed, and you'll also get a decent faked 
-% italic/slanted version if your \dvidriver can slant a fount.  This 
-% option counteracts the \optname{adobeeurofonts} option, and can be 
-% over-ridden by the \optname{eurosym} option.
-% 
-% \item[\optname{adobeeurofonts}] This option tells \packname{eurofont} 
-% to use Adobe's Eurofonts to supply the euro symbols for the standard 
-% set of \PS Type 1 founts; this setting is used by default. This 
-% option counteracts the \optname{marvosym} option, and can be 
-% over-ridden by the \optname{eurosym} option.
-% 
-% \item[\optname{eurosym}] This option tells \packname{eurofont} to use 
-% the \packname{eurosym} package's euro symbol for the Computer Modern 
-% families, and the standard set of \PS Type 1 founts. If the 
-% \packname{eurosym} package isn't available, \packname{eurofont} 
-% complains and all euro symbols are created using the normal 
-% \packname{eurofont} code for printing faked euro symbols.
-% 
-% \item[\optname{noeurosym}] This option counteracts the 
-% \optname{eurosym} option; if (for example) you have a configuration 
-% file that says \comname{ExecuteOptions\ttlb eurosym\ttrb}, you can tell 
-% \packname{eurofont} \emph{not} to use \packname{eurosym}'s euro 
-% symbols, and use the normal founts -- typically Adobe's Eurofonts and 
-% the Text Companion founts. This is the default behaviour.
-% \end{description}
-% 
-% These next four options only affect what you get when you've given the 
-% \packname{eurofont} package the \optname{eurosym} option. See the 
-% \packname{eurosym} package's documentation for more details.
-% \begin{description}
-% \item[\optname{official}]This option is passed to the 
-% \packname{eurosym} package, and tells it to give you the official euro 
-% symbol.
-%                    
-% \item[\optname{gen}]This option is passed to the \packname{eurosym} 
-% package, and tells it to give you a faked euro symbol.
-%               
-% \item[\optname{gennarrow}] This option is passed to the 
-% \packname{eurosym} package, and tells it to give you a faked euro 
-% symbol with narrow cross-strokes.
-%                     
-% \item[\optname{genwide}]This option is passed to the 
-% \packname{eurosym} package, and tells it to give you a faked euro 
-% symbol with wide cross-strokes.
-% \end{description}
-% 
-% The following three options affect how \packname{eurofont} produces 
-% faked euro symbols.
-% \begin{description}
-% \item[\optname{noslantfakeeuro}] \packname{Eurofont}'s faked euro 
-% symbols are produced with two rules of the same length.
-% 
-% \item[\optname{normalslantfakeeuro}] \packname{Eurofont}'s faked euro 
-% symbols are produced with two rules of slightly different length: the 
-% lower rule is the shorter of the two.  This is the default 
-% behaviour; it approximates the difference in length of the two rules 
-% in the official euro symbol.
-% 
-% \item[\optname{bigslantfakeeuro}] \packname{Eurofont}'s faked euro 
-% symbols are produced with two rules of greatly different length: the 
-% lower rule is by far the shorter of the two.  This was inspired by 
-% the China2e fount's euro symbol.
-% \end{description}
-% 
-% And finally, some options which don't seem to belong with anything 
-% else.
-% \begin{description}
-% \item[\optname{notextcomp}] This option tells the \packname{eurofont} 
-% package not to load the \packname{textcomp} package; it counteracts 
-% the \optname{textcomp} option. You might want to use this option if 
-% you find that some characters or accents are unexpectedly wrong when 
-% using the \packname{eurofont} package -- this sort of thing can be 
-% caused by loading the \packname{textcomp} package.  See also the 
-% \optname{fixtieaccent} option.
-% 
-% \item[\optname{textcomp}] This option tells the \packname{eurofont} 
-% package to load the \packname{textcomp} package (part of the standard 
-% \LaTeX\ distribution) if it is available. This package defines the 
-% \comname{texteuro} command (amongst other things). Trying to load 
-% \packname{textcomp} is the default behaviour. One possibly unwanted 
-% effect of loading \packname{textcomp} is that tie accents are 
-% typically messed up if you're using \PS Type 1 founts; the 
-% \optname{fixtieaccent} option can help out with this.
-% 
-% \item[\optname{fixtieaccent}] This option counteracts the 
-% \optname{nofixtieaccent} option: it makes \packname{eurofont} define 
-% the tie accent to work the way it does as standard when the 
-% \packname{textcomp} package hasn't been loaded. If you find tie 
-% accents no longer work when using \packname{eurofont}, you can use 
-% either this option or the \optname{notextcomp} option to fix things.
-% 
-% \item[\optname{nofixtieaccent}] This option counteracts the 
-% \optname{fixtieaccent} option: it stops \packname{eurofont} defining 
-% the tie accent to work the way it does as standard when the 
-% \packname{textcomp} package hasn't been loaded. This is the default 
-% behaviour.
-% 
-% \item[\optname{debugreport}] This option tells the 
-% \packname{eurofont} package to print all sorts of debugging 
-% information out when you use its commands.  I added this option for my 
-% own benefit, but you might find it useful if you're configuring 
-% \packname{eurofont} in strange fashions and not getting what you want.
-% 
-% \item[\optname{nodebugreport}]This option tells the 
-% \packname{eurofont} package not to print out any debugging 
-% information.  This is the default behaviour.
-% \end{description}
-% 
-% For those who might be interested: the following lines are executed 
-% just before loading the configuration file:
-%{\small
-%\begin{verbatim}
-% \ExecuteOptions{adobeeurofonts}%      Use Adobe's Eurofonts
-% \ExecuteOptions{noeurosym}%           Don't use eurosym
-% \ExecuteOptions{left}%                Euro symbol on left
-% \ExecuteOptions{normalslantfakeeuro}% Fake euros with slight slant
-% \ExecuteOptions{nodebugreport}%       No debugging reports
-% \ExecuteOptions{textcomp}%            Load the textcomp package
-% \ExecuteOptions{nofixtieaccent}%      Don't modify tie accents
-%\end{verbatim}
-%}
-% You can therefore over-ride any of these defaults by placing a 
-% subsequent \comname{ExecuteOptions} statement in the configuration 
-% file.  For example, to make the \comname{euros} command place the 
-% euro symbol on the right of the sum by default, add:
-%\begin{verbatim}
-%    \ExecuteOptions{right}
-%\end{verbatim}
-% to the configuration file, \filename{eurofont.cfg}.
-% 
-% \section{Configuring the \packname{eurofont} package}\label{sec:config}
-% 
-% There are three main mechanisms for changing the behaviour of 
-% \packname{eurofont}'s \comname{euro} command: passing an option to 
-% the \packname{eurofont} package, adding a fount family name to one 
-% of \packname{eurofont}'s lists, and re-defining the \comname{make...} 
-% commands used by the \comname{euro} command to print euro symbols.  
-% Options have been covered in section~\vref{sec:all_options}; the 
-% other two are covered here.
-% 
-% The \packname{eurofont} package comes with a configuration file -- 
-% \filename{eurofont.cfg} -- that's meant to be changed to match your 
-% preferences. If you want to add a fount family to a list, or re-define 
-% some commands, you can make the changes in the configuration file. You 
-% can also put code to do these jobs in a document file if you like.  
-% Please don't change \filename{eurofont.sty} itself, unless you change 
-% its name to something else.
-% 
-% The way the \comname{euro} command works is this: when you use the 
-% \comname{euro} command, it compares the current fount family name with 
-% the contents of a series of lists. If the current fount family name is 
-% in a given list, the command corresponding to that list is executed. 
-% This prints a particular euro symbol, and the \comname{euro} command 
-% finishes. If you don't know what a fount family name is in \LaTeX, 
-% have a look at section~\vref{sec:fountfamilies}.
-% 
-% The lists are created at the start of the \packname{eurofont} package, 
-% and have fount family names entered into them by the 
-% \comname{EFaddtolist} command. There's more than just the lists I've 
-% mentioned in section~\ref{sec:config_intro}, though. The configuration 
-% file contains the following lines by default:
-%\begin{verbatim}
-%%
-%%    List contents                                Corresponding command
-%%
-%   \EFaddtolist{\userlist}{}%                     \makeusereuro
-%   \EFaddtolist{\texteurolist}{}%                 \maketexteuro
-%   \EFaddtolist{\chinaelist}{}%                   \makechinaeeuro
-%   \EFaddtolist{\cmlist}{cmr,cmss,cmtt}%          \makecmeuro
-%   \EFaddtolist{\seriflist}{pbk,pnc,ppl,ptm,put}% \makeserifeuro
-%   \EFaddtolist{\sanslist}{pag,phv,psy,pzd}%      \makesanseuro
-%   \EFaddtolist{\monolist}{pcr}%                  \makemonoeuro
-%   \EFaddtolist{\fakemediumlist}{pzc}%            \makefakemediumeuro
-%   \EFaddtolist{\fakelightlist}{}%                \makefakelighteuro
-%   \EFaddtolist{\fakeheavylist}{}%                \makefakeheavyeuro
-% 
-%   \EFaddtolist{\faketexteurolist}{}
-% 
-%% Put all the standard LaTeX weights (and likely extras)
-%% into one of the following lists:
-% 
-%   \EFaddtolist{\EFlightserieslist}{ul,el,l,ulc,elc,lc,ulx,elx,lx}
-%   \EFaddtolist{\EFmediumserieslist}
-%                        {m,mb,db,sb,mc,mbc,dbc,sbc,mx,mbx,dbx,sbx}
-%   \EFaddtolist{\EFboldserieslist}{b,bx,bc}
-%   \EFaddtolist{\EFultraboldserieslist}{eb,ub,ebc,ubc,ebx,ubx}
-%\end{verbatim}
-% The point of the configuration file is that you should change it any 
-% way you like. But what do all these lines mean? In brief, what goes on 
-% is this: when you use the \comname{euro} command (and remember that 
-% the \comname{euro} command is used by the \comname{euros} command so 
-% this discussion applies to both commands), the current \LaTeX\ fount 
-% family name is compared to the contents of each of the lists above, in 
-% the order given, with an extra test I'll mention in a bit. If, for 
-% example, you're using New Century Schoolbook (fount family name 
-% \lfntname{pnc}), what happens with the default settings is this:
-% \begin{enumerate}
-% \item \comname{userlist} is examined. It's empty, so no match is 
-% found, and the command continues.
-% \item This is the extra test mentioned above: a test is made to see if 
-% the command \comname{pnceuro} exists (in general, the command 
-% \comname{<fam>euro} is looked for, where |<fam>| is the \LaTeX\ fount 
-% family name of the current fount). If this command exists, it's 
-% executed and the \comname{euro} command terminates. In this case, the 
-% command doesn't exist, so the command continues.
-% \item \comname{texteurolist} is examined.  It's empty, so the 
-% \comname{euro} command continues.
-% \item \comname{chinaelist} is examined.  It's empty, so the 
-% \comname{euro} command continues.
-% \item \comname{cmlist} is examined. It's not empty: the current fount 
-% family is \lfntname{pnc}, but the list contains \lfntname{cmr}, 
-% \lfntname{cmss}, and \lfntname{cmtt}. No match is found, so the 
-% \comname{euro} command continues.
-% \item \comname{seriflist} is examined. It's not empty: the current 
-% fount family is \lfntname{pnc}, and the list contains \lfntname{pbk}, 
-% \lfntname{pnc}, \lfntname{ppl}, \lfntname{ptm}, and \lfntname{put}. A 
-% match is found, so \comname{makeserifeuro} -- the command 
-% corresponding to this list -- is executed, which prints a euro symbol 
-% from one of Adobe's Euroserif founts, and the \comname{euro} command 
-% finishes.
-% \end{enumerate}
-% You might be wondering what the \comname{faketexteuro} list is for. If 
-% a fount family is listed in \comname{faketexteuro}, the 
-% \comname{maketexteuro} command will always execute the 
-% \comname{makefakeeuro} command to generate a faked euro symbol for 
-% that fount family. It prevents the \comname{euro} command from 
-% printing a euro symbol using the \comname{texteuro} command. I'm not 
-% sure that this is particularly useful, but it seemed like a good idea 
-% at the time.
-% 
-% Another unanswered question is: what happens if the \comname{euro} 
-% command has made all its tests and not printed a euro symbol? In this 
-% case, the \comname{makedefaulteuro} command is executed. By default, 
-% this command executes the \comname{makefakeeuro} command which prints 
-% a euro symbol faked with medium weight rules. You can of course 
-% re-define the \comname{makedefaulteuro} and \comname{makefakeeuro} 
-% commands any way you like.
-% 
-% The \comname{EF...serieslist} commands are used by the commands that 
-% print faked euro symbols; these commands are slightly more involved 
-% than you might think. I'll deal with this in detail in a bit.
-% 
-% \subsection{The \comname{make...euro} commands}\label{sec:config-makeeuro}
-% 
-% It might be that you want to do something that can't be done 
-% conveniently by just changing which fount families are listed in the 
-% lists above. If so, you'll probably find it most convenient to play 
-% around with the definitions of the various \comname{make...euro} 
-% commands; please do cut-and-paste the original definitions into the 
-% configuration file and modify them there if you think this will help. 
-% I used the \comname{providecommand} command to define all the 
-% \comname{make...euro} commands so that the definitions in 
-% \filename{eurofont.sty} won't have any effect if the commands have 
-% been defined earlier. There's more detail on what these commands do in 
-% section~\vref{sec:how_it_works} and in the commented source code.
-% 
-% The \comname{euro} command works like this: the current fount family 
-% name is compared against the contents of a series of lists. If the 
-% current fount family is present in a particular list, the command 
-% corresponding to that list is executed. The first match ends the 
-% execution of the \comname{euro} command: you'll not get two euro 
-% symbols if the current fount family is in two lists. You can see what 
-% I mean in section~\vref{sec:how_euro_works}.
-% 
-% One anomaly is the second test made in the \comname{euro} command, 
-% directly after looking in \comname{userlist}: this second test doesn't 
-% check for a match in a list, but instead checks for the existence of a 
-% command \comname{<fam>euro}, where |<fam>| is the current fount family 
-% name. If this command exists, it's executed and the \comname{euro} 
-% command ends. For example, if you define:
-%\begin{verbatim}
-%    \newcommand{\pcreuro}{EUR}
-%\end{verbatim}
-% every time you use the \comname{euro} or \comname{euros} command while 
-% using Courier -- which has the fount family name \lfntname{pcr} -- 
-% you'll get `EUR' printed (the standard international abbreviation for 
-% the euro) rather than a euro symbol of any sort.
-% 
-% This table is a partial summary of what goes on:
-% \begin{center}\small
-% \begin{tabularx}{\textwidth}{@{}ll>{\raggedright\arraybackslash}X@{}}
-% \textbf{List name}       & \textbf{Command executed}
-%                          & \textbf{What you get by default}      \\[1ex]
-% \comname{userlist}       & \comname{makeusereuro}   
-%                          & Fakes a euro and prints a warning.      \\
-%                          & \comname{<fam>euro}
-%                          & If it exists, \comname{<fam>euro} is 
-%                            executed.                               \\
-% \comname{texteurolist  } & \comname{maketexteuro}    
-%                          & Prints a euro symbol from the current 
-%                            fount or a faked euro symbol.           \\
-% \comname{chinaelist}     &  \comname{makechinaeeuro}
-%                          & Prints the euro from the China2e fount. \\
-% \comname{cmlist}         &  \comname{makecmeuro}
-%                          & Prints a euro symbol from the current
-%                            fount or a faked euro symbol.           \\
-% \comname{seriflist}      &  \comname{makeserifeuro}  
-%                          & Prints a euro from Adobe Euroserif.     \\
-% \comname{sanslist}       &  \comname{makesanseuro}  
-%                          & Prints a euro from Adobe Eurosans.      \\ 
-% \comname{monolist}       &  \comname{makemonoeuro}  
-%                          & Prints a euro from Adobe Euromono.      \\ 
-% \comname{fakelightlist}  &  \comname{makefakelighteuro}   
-%                          & Fakes a euro with light weight rules.   \\
-% \comname{fakemediumlist} &  \comname{makefakemediumeuro} 
-%                          & Fakes a euro with medium weight rules.  \\
-% \comname{fakeheavylist}  &  \comname{makefakeheavyeuro}   
-%                          & Fakes a euro with heavy weight rules.   \\
-% \end{tabularx}
-% \end{center}
-% What happens when you use the \comname{euro} command is that each list 
-% is considered in turn, starting with the \comname{userlist}. If the 
-% fount family being used at that point in the document is in that list, 
-% a euro symbol is generated by the specified command and that's the end 
-% of the command. If the fount family being used isn't in the first 
-% list, the next list is looked at and so on. If this explanation is 
-% less than crystal clear, you might find it useful to read 
-% section~\vref{sec:how_euro_works}.
-% 
-% If each list has been checked and the current fount family hasn't been 
-% found in any of them, the \comname{makedefaulteuro} command is 
-% executed. This produces a faked euro symbol: the \packname{eurofont} package 
-% has commands to make these by drawing two rules over a letter C; they 
-% can be surprisingly acceptable particularly if made with a sanserif 
-% fount.
-% 
-% A brief description of what each of the \comname{make...euro} command 
-% does is:
-% 
-% \begin{description}
-% \item[\comname{makefakeeuro}] This command doesn't correspond to a 
-% list, but is used by the \comname{makedefaulteuro} command and other 
-% parts of the \packname{eurofont} package. What it does is this: it 
-% first checks to see if the command \comname{<fam>fakeeuro} exists, 
-% where |<fam>| is the current \LaTeX\ fount family name. If this 
-% command exists, it's executed; if not, the current fount family name 
-% is checked against (in this order) the \comname{fakelightlist}, 
-% \comname{fakemediumlist}, and \comname{fakeheavylist}. If there's a 
-% match, it executes \comname{makefakelighteuro}, 
-% \comname{makefakemediumeuro}, or \comname{makefakeheavyeuro} 
-% (depending on which list had the match). If it finds no match, it 
-% executes \comname{makefakemediumeuro}.
-% 
-% The \comname{makefake...euro} commands produce euro symbols faked by 
-% placing a pair of rules over a letter `C'.
-% 
-% For example, if you were using Zapf Chancery, which has an internal 
-% \LaTeX\ fount family name of \lfntname{pzc}, and 
-% \comname{makefakeeuro} were executed, the first test would be to see 
-% if \comname{pzcfakeeuro} existed. Since \packname{eurofont} does 
-% define this command, it exists, and is executed.
-% 
-% \item[\comname{makeusereuro}] Meant to be defined by you; by default, 
-% this command generates an on-screen warning and executes the 
-% \comname{fakemediumrule\-euro} command which prints a euro symbol 
-% faked with medium rules.
-% 
-% \item[\comname{maketexteuro}]\label{item:maketexteuro:config}
-% This command executes the \comname{texteuro} command if these three 
-% conditions are met: the current \LaTeX\ fount family is not listed in 
-% the \comname{faketexteurolist}, the \comname{texteuro} command exists 
-% (it's defined by the \packname{textcomp} package which 
-% \packname{eurofont} tries to load by default), and the fount 
-% definition file |ts1<fam>.fd| exists (where |<fam>| is the current 
-% \LaTeX\ fount family name -- this \filename{fd} file will normally 
-% exist if the fount does have a euro symbol available). If these 
-% conditions are not met, it executes \comname{makefakeeuro} instead of 
-% \comname{texteuro}.
-% 
-% The \comname{texteuro} command, defined by \packname{textcomp}, prints 
-% a euro symbol from the current fount, assuming everything's working 
-% right; the \comname{makefakeeuro} command prints a euro symbol faked 
-% by placing two rules over a letter `C'.
-% 
-% \item[\comname{makechinaeeuro}] This command prints the euro symbol 
-% from the China2e fount. If the current fount series is listed as light 
-% or medium by being in either \comname{EFlightserieslist} or 
-% \comname{EFmediumserieslist} you'll get the straight China2e euro 
-% symbol; if the current fount series is listed as bold or ultra bold by 
-% being in either \comname{EFbold\-series\-list} or 
-% \comname{EFultraboldserieslist} you'll get a faked bold China2e euro 
-% symbol. If the current fount series isn't listed in any of these 
-% lists, you'll get a straight China2e euro symbol.
-% 
-% The \comname{makechinaeeuro} command checks for the \packname{china2e} 
-% package: if it's missing, you'll get a warning message and a faked 
-% euro symbol.
-% 
-% \item[\comname{makecmeuro}] This command normally has the same effect 
-% as \comname{maketexteuro}: it executes the \comname{texteuro} command 
-% if the three conditions are met (see above, in the 
-% \comname{maketexteuro} entry on 
-% page~\pageref{item:maketexteuro:config}); otherwise, it executes 
-% \comname{makefakeeuro} -- this command fakes a euro symbol from a C 
-% over-printed with two rules. This behaviour can be changed using an 
-% option: if you've passed the \packname{eurosym} option to 
-% \packname{eurofont}, the \comname{makecmeuro} command prints Eurosym's 
-% euro symbol instead.
-% 
-% \item[\comname{makeserifeuro}]
-% This command normally prints a euro symbol from one of Adobe's 
-% Euroserif founts (medium, italic, bold, or bold italic). If you've 
-% passed the \optname{marvosym} option to \packname{eurofont}, you'll 
-% get a seriffed euro symbol from the Marvosym fount instead. Since 
-% Marvosym doesn't have real bold euro symbols, you'll get a faked bold 
-% euro symbol if the current fount series is listed in  
-% \comname{EFboldserieslist} or \comname{EFultraboldserieslist} (as 
-% with the \comname{makechinaeeuro} command).
-% 
-% If you've passed the \optname{eurosym} option to \packname{eurofont}, 
-% you'll get a euro symbol generated by \packname{eurosym}'s 
-% \comname{euro} command: this option over-rides both the 
-% \optname{marvosym} option and the default \optname{adobeeurofonts} 
-% option.
-% 
-% The commands \comname{makeserifeuro}, \comname{makesanseuro}, and 
-% \comname{makemonoeuro} are very similar.
-% 
-% \item[\comname{makesanseuro}] 
-% This command normally prints a euro symbol from one of Adobe's 
-% Eurosans founts (medium, italic, bold, or bold italic). If you've 
-% passed the \optname{marvosym} option to \packname{eurofont}, you'll 
-% get a sanserif euro symbol from the Marvosym fount instead. Since 
-% Marvosym doesn't have real bold euro symbols, you'll get a faked bold 
-% euro symbol if the current fount series is listed in 
-% \comname{EFboldserieslist} or \comname{EFultraboldserieslist} (as 
-% with the \comname{makechinaeeuro} command).
-% 
-% If you've passed the \optname{eurosym} option to \packname{eurofont}, 
-% you'll get a euro symbol generated by \packname{eurosym}'s \comname{euro} 
-% command: this option over-rides both the \optname{marvosym} option and 
-% the default \optname{adobeeurofonts} option.
-% 
-% The commands \comname{makeserifeuro}, \comname{makesanseuro}, and 
-% \comname{makemonoeuro} are very similar.
-% 
-% \item[\comname{makemonoeuro}] 
-% This command normally prints a euro symbol from one of Adobe's 
-% Euromono founts (medium, italic, bold, or bold italic). If you've 
-% passed the \optname{marvosym} option to \packname{eurofont}, you'll 
-% get a monospaced euro symbol from the Marvosym fount instead. Since 
-% Marvosym doesn't have real bold euro symbols, you'll get a faked bold 
-% euro symbol if the current fount series is listed in 
-% \comname{EFboldserieslist} or \comname{EFultraboldserieslist} (as 
-% with the \comname{makechinaeeuro} command).
-% 
-% If you've passed the \optname{eurosym} option to \packname{eurofont}, 
-% you'll get a euro symbol generated by \packname{eurosym}'s \comname{euro} 
-% command: this option over-rides both the \optname{marvosym} option and 
-% the default \optname{adobeeurofonts} option.
-% 
-% The commands \comname{makeserifeuro}, \comname{makesanseuro}, and 
-% \comname{makemonoeuro} are very similar.
-% 
-% \item[\comname{makefakelighteuro}] 
-% First checks to see if the command \comname{<fam>fakeeuro} exists 
-% (where |<fam>| is the name of the current fount family); if so, it 
-% executes \comname{<fam>fakeeuro} (as with \comname{makefakeeuro}). If 
-% not, it executes \comname{fakelighteuro} -- this gives you a euro 
-% symbol faked with light rules.
-% 
-% The particular weight (or thickness) of these rules varies depending 
-% on which \comname{EF...serieslist} the current fount series is in: the 
-% rules are lightest if the current fount series is listed in 
-% \comname{EFlightserieslist}, progressively heavier if listed in 
-% \comname{EFmediumseries} and \comname{EFboldseries}, and heaviest if 
-% listed in \comname{EFultraboldseries}. If the current fount series 
-% isn't listed in any of these lists, you get the rules you'd get if the 
-% current series were listed in \comname{EFmediumseries}.
-% 
-% This command is very similar to the commands 
-% \comname{makefakemediumeuro} and \comname{makefakeheavyeuro}.
-% 
-% \item[\comname{makefakemediumeuro}] 
-% First checks to see if the command \comname{<fam>fakeeuro} exists 
-% (where |<fam>| is the name of the current fount family); if so, it 
-% executes \comname{<fam>fakeeuro} (as with \comname{makefakeeuro}). If 
-% not, it executes \comname{fakemediumeuro} -- this gives you a euro 
-% symbol faked with medium weight rules.
-% 
-% The particular weight (or thickness) of these rules varies depending 
-% on which \comname{EF...serieslist} the current fount series is in: the 
-% rules are lightest if the current fount series is listed in 
-% \comname{EFlightserieslist}, progressively heavier if listed in 
-% \comname{EFmediumseries} and \comname{EFboldseries}, and heaviest if 
-% listed in \comname{EFultraboldseries}. If the current fount series 
-% isn't listed in any of these lists, you get the rules you'd get if the 
-% current series were listed in \comname{EFmediumseries}.
-% 
-% This command is very similar to the commands 
-% \comname{makefakemediumeuro} and \comname{makefakeheavyeuro}.
-% 
-% \item[\comname{makefakeheavyeuro}] 
-% First checks to see if the command \comname{<fam>fakeeuro} exists 
-% (where |<fam>| is the name of the current fount family); if so, it 
-% executes \comname{<fam>fakeeuro} (as with \comname{makefakeeuro}). If 
-% not, it executes \comname{fakeheavyeuro} -- this gives you a euro 
-% symbol faked with heavy rules.
-% 
-% The particular weight (or thickness) of these rules varies depending 
-% on which \comname{EF...serieslist} the current fount series is in: the 
-% rules are lightest if the current fount series is listed in 
-% \comname{EFlightserieslist}, progressively heavier if listed in 
-% \comname{EFmediumseries} and \comname{EFboldseries}, and heaviest if 
-% listed in \comname{EFultraboldseries}. If the current fount series 
-% isn't listed in any of these lists, you get the rules you'd get if the 
-% current series were listed in \comname{EFmediumseries}.
-% 
-% This command is very similar to the commands 
-% \comname{makefakemediumeuro} and \comname{makefakeheavyeuro}.
-% 
-% \item[\comname{makedefaulteuro}] 
-% This command normally prints a faked euro symbol generated with the 
-% \comname{makefakeeuro} command.
-% 
-% If you've passed the \optname{eurosym} option to \packname{eurofont}, 
-% the \comname{makedefaulteuro} command prints a euro symbol generated 
-% by \packname{eurosym}'s \comname{euro} command. Otherwise, the 
-% \comname{makedefaulteuro} command prints a faked euro symbol generated 
-% with the \comname{makefakeeuro} command.
-% 
-% For the curious: \packname{eurofont} defines the \comname{ESeuro} 
-% command to be whatever \packname{eurosym} defined the \comname{euro} 
-% command to be. \packname{Eurofont} can then define the \comname{euro} 
-% command to be something else, but \packname{eurosym}'s \comname{euro} 
-% code is still accessible by using the \comname{ESeuro} command.
-% 
-% \end{description}
-% 
-% \section{Founts containing euro symbols}\label{sec:getfounts}
-% 
-% This section was written in October 1998: I know that there are founts 
-% other than the ones I've noted below that contain euro symbols, but 
-% these are the only ones I know of that are convenient to use with 
-% \LaTeX. As far as I know, the founts currently included with `euro 
-% compatible' versions of MS-Windows and the MacOS have a euro symbol 
-% that is close to the official euro symbol. This doesn't match the 
-% fount it's included with in most cases. It seems to me that there is 
-% nothing to be gained by using these euro symbols with \LaTeX. I expect 
-% this situation will change in time, and matching euro symbols are 
-% designed for more founts.
-% 
-% Aside from the Text Companion founts which accompany the EC founts 
-% (the relatively new T1 encoded versions of the standard Computer 
-% Modern founts used by \LaTeX -- I think they are included with all 
-% recent \LaTeX\ distributions), Metafont euro symbols are included in 
-% two other founts available from CTAN: China2e, which has a single very 
-% lovely euro symbol; and Eurosym, which has the official euro symbol. 
-% You can find out how to get all of these in 
-% section~\vref{sec:getMFfounts}.
-% 
-% The euro symbols in the Text Companion founts were designed before 
-% the final official euro symbol was decided on, and might be considered 
-% a bit eccentric by some.
-% 
-% I know of two sets of \PS Type 1 founts containing euro 
-% symbols: Adobe's Eurofonts, a set of 12 founts providing seriffed, 
-% sanserif, and monospaced euro symbols in medium upright, italic, bold, 
-% and bold italic version; and the Marvosym fount, which has three euro 
-% symbols, very similar to the medium upright seriffed, sanserif, and 
-% monospaced euro symbols from Adobe.
-% 
-% Your \TeX\ system's documentation should tell you if you can use \PS 
-% Type 1 founts. Typically, you need either: a \PS printer or \PS 
-% interpreter on your computer such as Ghostscript; or Adobe Type 
-% Manager (ATM) installed on your computer and a \dvidriver (such as 
-% \OzTeX's) which can take advantage of this.
-% 
-% \subsection{Getting Marvosym or Adobe's Eurofonts}\label{sec:getPSfounts}
-% 
-% Adobe's Eurofonts are available (October 1998) in a Mac version 
-% from here:
-%\begin{verbatim}
-% ftp://ftp.adobe.com/pub/adobe/type/mac/all/eurofont.sea.hqx
-% ftp://ftp-pac.adobe.com/pub/adobe/type/mac/all/eurofont.sea.hqx
-%\end{verbatim}
-% Textures users on Macs should also download these files from CTAN:
-%\begin{verbatim}
-% systems/mac/textures/contrib/IdealFonts/EuroDefs.sit.hqx
-% systems/mac/textures/contrib/IdealFonts/README.IF
-%\end{verbatim}
-% You should still download Adobe's Eurofonts separately.
-% 
-% Adobe's Eurofonts are available (October 1998) in a version suitable 
-% for MS-Windows PCs and Unix from here:
-%\begin{verbatim}
-% ftp://ftp.adobe.com/pub/adobe/type/win/all/eurofont.exe
-% ftp://ftp-pac.adobe.com/pub/adobe/type/win/all/eurofont.exe
-%\end{verbatim}
-% These files are self-extracting archives on MS-Windows computers which 
-% can be decompressed on Unix computers with the \verb|unzip| command.
-% 
-% The Marvosym fount is available from CTAN in \filename{pfb} and 
-% \filename{pfa} versions, and I gather these versions won't work with 
-% ATM. There are also Mac versions based on the Y\&Y re-working of 
-% Marvosym mentioned below -- a Truetype version and a Mac PS Type 1 
-% version that will work with ATM.
-% 
-% The Marvosym fount and package are (October 1998) in this location at 
-% CTAN:
-% site (October 1998):
-%\begin{verbatim}
-%    /fonts/psfonts/marvosym/
-%\end{verbatim}
-%
-% A version which is apparently ATM compatible (implying the original 
-% version from CTAN isn't) is available from here:
-%\begin{verbatim}
-%    http://www.YandY.com/download/marvosym.zip
-%\end{verbatim}
-% Note that the metrics for this version of Marvosym are slightly 
-% different to the original; to use this version of Marvosym with 
-% \packname{eurofont}, you should re-name the file 
-% \filename{marvosym.tfm} to \filename{fmvr8x.tfm} and put it on your 
-% tex-fonts path.
-% 
-% Martin Vogel's Web page contains a TrueType version of Marvosym, in 
-% a format suitable for MS-Windows computers:
-%\begin{verbatim}
-%   http://www.fh-bochum.de/fb1/vogel/marvosym.html
-%\end{verbatim}
-% 
-% \subsection{\Dvidriver configuration for 
-% Adobe's Eurofonts and the Marvosym fount} \label{sec:dvidriver_config}
-% 
-% This section contains information on how to configure dvips and 
-% \OzTeX\ to use Adobe's Eurofonts and the Marvosym fount. I believe 
-% that pdf\TeX\ can use dvips entries.
-% 
-% You might find it useful to refer to the file \filename{dvidrive.txt} 
-% that is created by running \LaTeX\ on \filename{eurofont.ins}: 
-% \filename{dvidrive.txt} contains a plain text version of this 
-% \dvidriver configuration information, so you can cut and paste the 
-% lines you need to the appropriate file on your computer.
-% 
-% If you have any problems with this information, or if you have 
-% information on how to configure other \dvidriver{}s, please let me 
-% know by email.
-% 
-% \subsubsection{\Dvidriver configuration lines for Adobe's Eurofonts}
-% 
-% This section contains information for configuring \dvidriver{}s to use 
-% these \PS Type 1 founts; what you need to do is add the given 
-% lines to a file so that your \dvidriver knows which \PS Type 1 fount 
-% file (and so on) corresponds to a particular \filename{tfm} file in a 
-% \filename{dvi} file. In the case of dvips, the file you add lines to 
-% is typically called \filename{psfonts.map}. In the case of \OzTeX, you 
-% will normally add lines to the \filename{Default} configuration file 
-% -- if you also use dvips, you'll add lines to \filename{psfonts.map} 
-% as well.
-% 
-% Note that versions of dvips before v5.83 have trouble doing partial fount 
-% downloading with Adobe's Eurofonts. Because of this, I have listed the 
-% dvips psfont.map entries with `|<<|' and with `|<|': the `|<<|' 
-% entries prevent dvips attempting to do partial fount downloading with 
-% that particular fount.
-% 
-% The `|<<|' syntax does not work with all versions of dvips; it does 
-% work with dvips~v5.78, but doesn't work with v5.70. If you're using a 
-% pre `|<<|' dvips, you should use the entries with `|<|' and don't use 
-% partial fount downloading with any document containing Adobe's 
-% Eurofonts; passing the |-j0| switch to dvips will prevent it from 
-% doing partial fount downloading if this is normally turned on.
-% 
-% I've asked the author of dvips when the `|<<|' syntax was first introduced, 
-% and he can't remember.
-% 
-% I am told that pdf\TeX\ can do partial fount downloading using Adobe's 
-% Eurofonts.
-% 
-% \paragraph{Eurofont configuration lines for MS-Windows and Unix}
-% 
-% The following lines were supplied by Stefan Ulrich 
-% |<ulrich@cis.uni-muenchen.de>|, who tells me that you need to re-name 
-% the \filename{PFB} files \filename{pfb}.
-% 
-% If these lines work with computers other than those running 
-% MS-Windows and Unix, please let me know so I can change the 
-% documentation to suit.
-% 
-% The following entries are for dvips~v5.78 and possibly some other 
-% versions:
-%\begin{verbatim}
-%    zpeurs  EuroSans-Regular     <<_1______.pfb
-%    zpeubs  EuroSans-Bold        <<_1B_____.pfb
-%    zpeuris EuroSans-Italic      <<_1I_____.pfb
-%    zpeubis EuroSans-BoldItalic  <<_1BI____.pfb
-%    zpeurt  EuroMono-Regular     <<_2______.pfb
-%    zpeubt  EuroMono-Bold        <<_2B_____.pfb
-%    zpeurit EuroMono-Italic      <<_2I_____.pfb
-%    zpeubit EuroMono-BoldItalic  <<_2BI____.pfb
-%    zpeur   EuroSerif-Regular    <<_3______.pfb
-%    zpeub   EuroSerif-Bold       <<_3B_____.pfb
-%    zpeuri  EuroSerif-Italic     <<_3I_____.pfb
-%    zpeubi  EuroSerif-BoldItalic <<_3BI____.pfb
-%\end{verbatim}
-% 
-% The following entries are for dvips~v5.70 or earlier, probably dvips 
-% v5.79 and above, and pdf\TeX. Since that I don't use pdf\TeX, this 
-% suggestion might not work -- please let me know if you have any 
-% problems.
-%\begin{verbatim}
-%    zpeurs  EuroSans-Regular     <_1______.pfb
-%    zpeubs  EuroSans-Bold        <_1B_____.pfb
-%    zpeuris EuroSans-Italic      <_1I_____.pfb
-%    zpeubis EuroSans-BoldItalic  <_1BI____.pfb
-%    zpeurt  EuroMono-Regular     <_2______.pfb
-%    zpeubt  EuroMono-Bold        <_2B_____.pfb
-%    zpeurit EuroMono-Italic      <_2I_____.pfb
-%    zpeubit EuroMono-BoldItalic  <_2BI____.pfb
-%    zpeur   EuroSerif-Regular    <_3______.pfb
-%    zpeub   EuroSerif-Bold       <_3B_____.pfb
-%    zpeuri  EuroSerif-Italic     <_3I_____.pfb
-%    zpeubi  EuroSerif-BoldItalic <_3BI____.pfb
-%\end{verbatim}
-% 
-% \paragraph{Eurofont configuration lines for Macs}
-% 
-% Macintosh \filename{psfonts.map} entries for dvips v5.78 and possibly 
-% some other versions:
-%\begin{verbatim}
-%    zpeur   EuroSerif-Regular     <<EuroSerReg
-%    zpeuri  EuroSerif-Italic      <<EuroSerIta
-%    zpeub   EuroSerif-Bold        <<EuroSerBol
-%    zpeubi  EuroSerif-BoldItalic  <<EuroSerBolIta
-%    zpeurs  EuroSans-Regular      <<EuroSanReg
-%    zpeuris EuroSans-Italic       <<EuroSanIta
-%    zpeubs  EuroSans-Bold         <<EuroSanBol
-%    zpeubis EuroSans-BoldItalic   <<EuroSanBolIta
-%    zpeurt  EuroMono-Regular      <<EuroMonReg
-%    zpeurit EuroMono-Italic       <<EuroMonIta
-%    zpeubt  EuroMono-Bold         <<EuroMonBol
-%    zpeubit EuroMono-BoldItalic   <<EuroMonBolIta
-%\end{verbatim}
-% 
-% 
-% Macintosh \filename{psfonts.map} entries for dvips~v5.70 or before, 
-% probably dvips v5.79 and above, and pdf\TeX. Since that I don't use 
-% pdf\TeX, this suggestion might not work -- please let me know if you 
-% have any problems.
-%\begin{verbatim}
-%    zpeur   EuroSerif-Regular     <EuroSerReg
-%    zpeuri  EuroSerif-Italic      <EuroSerIta
-%    zpeub   EuroSerif-Bold        <EuroSerBol
-%    zpeubi  EuroSerif-BoldItalic  <EuroSerBolIta
-%    zpeurs  EuroSans-Regular      <EuroSanReg
-%    zpeuris EuroSans-Italic       <EuroSanIta
-%    zpeubs  EuroSans-Bold         <EuroSanBol
-%    zpeubis EuroSans-BoldItalic   <EuroSanBolIta
-%    zpeurt  EuroMono-Regular      <EuroMonReg
-%    zpeurit EuroMono-Italic       <EuroMonIta
-%    zpeubt  EuroMono-Bold         <EuroMonBol
-%    zpeubit EuroMono-BoldItalic   <EuroMonBolIta
-%\end{verbatim}
-% 
-% 
-% \OzTeX\ config file entries: these lines are normally added to the 
-% \filename{Default} config file in \OzTeX's \filename{Configs} folder. 
-% These lines should work with any version of \OzTeX\ from at least 
-% version~1.7 onwards. Please let me know if you have any problems.
-%\begin{verbatim}
-%    zpeur    EuroSerif-Regular     "Euro Serif"      nil   
-%    zpeuri   EuroSerif-Italic      "Euro Serif"      nil i 
-%    zpeub    EuroSerif-Bold        "Euro Serif"      nil b 
-%    zpeubi   EuroSerif-BoldItalic  "Euro Serif"      nil bi
-%    zpeurs   EuroSans-Regular      "Euro Sans"       nil   
-%    zpeuris  EuroSans-Italic       "Euro Sans"       nil i 
-%    zpeubs   EuroSans-Bold         "Euro Sans"       nil b 
-%    zpeubis  EuroSans-BoldItalic   "Euro Sans"       nil bi
-%    zpeurt   EuroMono-Regular      "Euro Monospace"  nil   
-%    zpeurit  EuroMono-Italic       "Euro Monospace"  nil i 
-%    zpeubt   EuroMono-Bold         "Euro Monospace"  nil b 
-%    zpeubit  EuroMono-BoldItalic   "Euro Monospace"  nil bi
-%\end{verbatim}
-% 
-% \subsubsection{\Dvidriver configuration lines for 
-% Marvosym}\label{sec:dvidriver_config:mvs}
-% 
-% I have been greatly confused while trying to work out how to configure 
-% \dvidriver{}s to use Marvosym. I think I've got it right, but I can't 
-% test on anything but my Mac. I'd appreciate an email if you find that 
-% any of the information below turns out to be wrong.
-% 
-% There are two versions of the Marvosym out there in network land: the 
-% original, and a version that's been re-worked by Y\&Y. As far as I can 
-% work out, the Y\&Y version of Marvosym has identical glyphs to the 
-% original, and differs in that it works properly with ATM and has 
-% better hinting. This means that the new version should render better 
-% at low and medium resolutions. In other words, I think the Y\&Y 
-% version is better than the original.  The metrics for the two 
-% versions are very slightly different to each other, so you should make 
-% sure you're using the \filename{tfm} file that came with the version 
-% of the Marvosym fount that you're using.
-% 
-% Dvips \filename{psfonts.map} entries for the original Marvosym fount:
-%\begin{verbatim}
-%  fmvr8x  Martin_Vogels_Symbole                   <marvosym.pfb
-%  fmvri8x Martin_Vogels_Symbole " .167 SlantFont" <marvosym.pfb
-%\end{verbatim}
-%
-% Dvips \filename{psfonts.map} entries for the Y\&Y `ATM compatible' 
-% re-worked Marvosym fount:
-%\begin{verbatim}
-%  fmvr8x   Marvosym                    <marvosym.pfb
-%  fmvri8x  Marvosym " .167 SlantFont"  <marvosym.pfb
-%\end{verbatim}
-%
-% I have assumed that all \dvidriver{}s that can use \PS Type 1 founts 
-% can also produce fake italic founts by slanting an upright version.  
-% Because of this, I have made no provision for \dvidriver{}s that can't 
-% do this.  If you have a \dvidriver that can't fake an italic, please 
-% let me know and I'll modify the \packname{eurofont} package to take 
-% this into account, probably by adding another option and writing a 
-% new \filename{fd} file.
-% 
-% \paragraph{Note for Macintosh users}
-%
-% A Mac version of the Marvosym fount has been created in \PS Type 1 and 
-% TrueType versions. It uses the Y\&Y names as above, and 
-% these lines are be needed for dvips's \filename{psfonts.map} file:
-%\begin{verbatim}
-%  fmvr8x   Marvosym                    <Marvo
-%  fmvri8x  Marvosym " .167 SlantFont"  <Marvo
-%\end{verbatim}
-% And these lines for \OzTeX's default config file:
-%\begin{verbatim}
-%  fmvr8x    Marvosym     Marvosym     nil
-%  fmvri8x   Marvosym     Marvosym     nil i
-%\end{verbatim}
-%
-% If a version of the original Marvosym fount is ever released for Macs, 
-% these  lines will be needed for dvips's \filename{psfonts.map} file:
-%\begin{verbatim}
-%  fmvr8x  Martin_Vogels_Symbole                   <MartiVogSym
-%  fmvri8x Martin_Vogels_Symbole " .167 SlantFont" <MartiVogSym
-%\end{verbatim}
-% And these lines for \OzTeX's default config file:
-%\begin{verbatim}
-%  fmvr8x    MartiVogSym  "Martin Vogels Symbole"       nil
-%  fmvri8x   MartiVogSym  "Martin Vogels Symbole"       nil i
-%\end{verbatim}
-% 
-% \subsection{Metafont founts containing euro symbols}\label{sec:getMFfounts}
-% 
-% The three Metafont sources of euro symbols that I know of are the 
-% Text Companion founts, the China2e fount, and the Eurosym fount.  If 
-% you know of others, I'd appreciate an email to tell me about them.
-% 
-% The current (October 1998) version of \LaTeX\ is set up to work with 
-% the relatively new T1 (and TS1) encoded versions of the usual Computer 
-% Modern founts. If you don't have the `European Computer Modern' and 
-% `Text Companion' founts -- otherwise known as the EC and TC founts -- 
-% it might be a good idea to get them now: the TS1 encoded Text 
-% Companion founts are the ones containing euro symbols. 
-% 
-% If the above paragraph doesn't make much sense to you, you can find 
-% out if your \LaTeX\ has access to the European Computer Modern and 
-% Text Companion founts by \LaTeX ing this file:
-%\begin{verbatim}
-%    \documentclass{article}
-%      \usepackage[T1]{fontenc}
-%      \usepackage{textcomp}
-%      \begin{document}
-%        Hello world.  \texteuro.
-%      \end{document}
-%\end{verbatim}
-% If you get no error messages, you have access to both the European 
-% Computer Modern (EC) and Text Companion (TC) founts.
-% 
-% If not, you can get these founts, as well as the Eurosym and China2e 
-% founts and packages, from these locations at your nearest CTAN 
-% site:
-%\begin{verbatim} 
-%    /fonts/ec/
-%    /fonts/eurosym/
-%    /macros/latex/contrib/supported/china2e/
-%\end{verbatim}
-% 
-% \section{Potentially useful extra information}
-% 
-% Most of the ideas in the \packname{eurofont} package are not my own 
-% invention, and are documented elsewhere. \LaTeX's fount selection 
-% scheme, for example, is documented in the file 
-% \filename{fntguide.tex} which is part of the standard \LaTeX\ 
-% distribution. The file \filename{simple-nfss.tex} kept in the
-% \filename{info/} directory at CTAN is also useful.
-% 
-% If you're interested in understanding the details of the source code, 
-% you'll probably find it useful to read \filename{clsguide.tex} (also 
-% part of the standard \LaTeX\ distribution), as well as Leslie 
-% Lamport's `\LaTeX, a document preparation system', 2nd edition, 
-% Addison-Wesley.  Donald Knuth's `The \TeX book', also published by 
-% Addison-Wesley, is probably essential reading.  Goosens, Mittlebach, 
-% and Samarin's `The \LaTeX\ Companion', published by Addison-Wesley, is 
-% apparently a useful source of documentation on the internals of 
-% \LaTeX; I've found the commented \LaTeX\ source code an adequate 
-% substitute for this book.
-% 
-% \subsection{Fount families and series}\label{sec:fountfamilies}
-% 
-% \LaTeXe\ comes with a way of selecting founts called the New Fount 
-% Selection Scheme (NFSS). Each fount you use is specified by five 
-% things: encoding, family, series, shape, and size. A typical 
-% specification is |OT1/ptm/m/n at 12pt|. This means an \lfntname{OT1} 
-% encoded version of \lfntname{ptm} (Adobe Times) family, \lfntname{m} 
-% (medium) series, \lfntname{n} (normal upright roman) shape, in a size 
-% of 12pt. The point of the NFSS is to take a particular fount 
-% specification -- like |OT1/ptm/m/n at 12pt| -- and work out which 
-% \filename{tfm} file should be used.
-% 
-% This job is essential, because as far as \TeX\ is concerned, a 
-% \filename{tfm} file \emph{is} a fount: without a \filename{tfm} file, 
-% you get no letters on the page. A \filename{tfm} file is just a list 
-% of sizes of each letter and things like that; the actual letter shapes 
-% are kept elsewhere. The \dvidriver needs to know which \filename{tfm} 
-% file corresponds to which `real' fount, which is what dvips's 
-% \filename{psfonts.map} is for.
-% 
-% What the NFSS does is add a high-level interface to let you select a 
-% particular \filename{tfm} file without having to deal with any of the 
-% awkward details -- \LaTeX\ has always had some sort of interface to 
-% allow this sort of thing, but the NFSS is much better than earlier 
-% efforts, and much, much easier to set up for a new set of founts.
-% 
-% The precise details of exactly which \filename{tfm} file is to be used 
-% for each fount specification are contained in the various 
-% \filename{fd} files installed on your computer (they're kept somewhere 
-% on the tex-inputs path). \filename{ot1ptm.fd}, for example, is 
-% consulted in the above example. It says that \filename{ptm7t.tfm} 
-% should be used for |OT1/ptm/m/n| at all sizes. This doesn't mean that 
-% you can only get Adobe Times in one size, because \TeX\ will scale the 
-% fount to the appropriate size -- the instruction to do this is 
-% included in the \filename{fd} file.
-% 
-% You might be wondering what an encoding is. Well, when you type 
-% information into a computer, each character you type is given a number 
-% and this number is stored in memory: this number `is' the character 
-% you have just typed. The relationship between the characters and 
-% numbers is called an encoding. ASCII encoding, for example, says that 
-% the letter `A' has the number 65; `B' has the number 66, and so on. In 
-% the case of \LaTeX, you have two encodings: the input encoding -- 
-% which is used to translate the input file into \TeX's internal 
-% encoding (which you can forget about for now); and the output 
-% encoding, which is used to create the \filename{dvi} file. For 
-% example, a Mac user might type an \"{o} (number 194) into a 
-% \filename{tex} file. Assuming that he'd said 
-% \comname{usepackage[applemac]\ttlb inputenc\ttrb}, that would result 
-% in the appropriate character appearing in the \filename{dvi} file. 
-% This character would be represented in the \filename{dvi} file by a 
-% number 246 if you were using a \lfntname{T1} encoded fount at that 
-% point. If you were using an \lfntname{OT1} encoded fount, it would be 
-% represented by a combination of character number 128 (umlaut) placed 
-% over character number 111 (the letter o). There are many other output 
-% and input encodings that are commonly used. It is, for example, common 
-% to use ASCII input encoding, so you have to type |\"{o}| to get \"{o}. 
-% \LaTeX\ usually sorts out all the details for you so you don't have 
-% to think about encodings that often.
-% 
-% From the point of view of configuring the \packname{eurofont} package, 
-% you can probably ignore encodings. The two most common text fount 
-% encodings used with \LaTeX\ are \lfntname{OT1} and \lfntname{T1}: 
-% the original 7-bit standard encoding and the newer 8-bit standard 
-% encoding respectively.
-% 
-% What \packname{eurofont} is most interested in is the fount family 
-% name. This comes after the encoding: |OT1/ptm|, and is usually a three 
-% letter abbreviation like \lfntname{ptm} for Adobe Times. The full 
-% explanation of the naming scheme is presented in the fontname 
-% documentation\footnote{Available from CTAN: \texttt{/info/fontname/}}. 
-% In brief, the first letter of this family usually indicates the firm 
-% that made the fount. Adobe is indicated by a `\lfntname{p}' (for \PS, 
-% because Adobe created \PS). The next two letters indicates the name of 
-% the fount. Times is indicated by `\lfntname{tm}'. Not all fount 
-% families follow this pattern: the Computer Modern families pre-date 
-% the fontname naming scheme, so (for example) the Computer Modern 
-% Sanserif family has the name `\lfntname{cmss}'. And some fount families 
-% named according to the fontname scheme have very strange names. The 
-% Adobe Euroserif family has the name `\lfntname{zpeur}', the letter 
-% \lfntname{z} being a prefix meaning `bizarre'.
-% 
-% There's effectively an unlimited range of fount family names. One way 
-% of finding out what the name is of a particular fount family is using 
-% \packname{eurofont}'s \comname{showfontfamily} command in your 
-% document: it'll print the current fount family on the console and in 
-% the log file. For example, if you \LaTeX\ this file:
-%\begin{verbatim}
-%  \documentclass{article}
-%    \usepackage{otherfont}% A fictitious package to select a fount
-%    \usepackage{eurofont}
-%    \begin{document}
-%      Blah blah blah
-%     \showfontfamily
-%    \end{document}
-%\end{verbatim}
-% You'll get a message in the log file and the terminal output telling 
-% you what the fount family used to typeset `Blah blah blah' is.
-% 
-% Another way of finding out a particular fount family name is this: 
-% files for using different founts with \LaTeX\ -- such as 
-% \filename{times.sty} -- tend to contain lines like:
-%\begin{verbatim}
-%    \renewcommand{\sfdefault}{phv}
-%    \renewcommand{\rmdefault}{ptm}
-%    \renewcommand{\ttdefault}{pcr}
-%\end{verbatim}
-% This means that the \lfntname{phv} (Adobe Helvetica) family is used 
-% for \comname{sffamily}, the \lfntname{ptm} family (Adobe Times) family 
-% is used for \comname{rmfamily}, and the \lfntname{pcr} family (Adobe 
-% Courier) is used for \comname{ttfamily}. This means you can find out 
-% which fount family is used by examining the package file you use to 
-% select it.
-% 
-% If you're interested in the details of producing faked euro 
-% symbols, the fount series becomes relevant.  The normally available 
-% fount series are just different weights:
-% \begin{center}
-% \begin{tabular}{ll|ll}
-% ul & ultra light      & sb & semi bold    \\
-% el & extra light      & b  & bold         \\
-% l  & light            & bx & bold extended\\
-% m  & normal (medium)  & eb & extra bold   \\
-% mb & medium bold      & ub & ultra bold   \\
-% db & demi bold        &                   \\
-% \end{tabular}
-% \end{center}
-% Of these, only two are selectable with normal commands. 
-% \comname{bfseries}, for example, selects the \lfntname{bx} (bold 
-% extended) series; and \comname{mdseries} selects the \lfntname{m} 
-% (normal `medium' weight). Most fount families come in two different 
-% weights only. No normal founts are available in the range of weights 
-% just listed, although Multiple Master founts (those with a weight 
-% design axis) can be used in any number of different weights over 
-% almost any range. If you have produced a Multiple Master fount setup 
-% that gives you access to the full standard range of \LaTeX\ fount 
-% series, you are clearly mad\footnote{And probably called something 
-% like Melissa or Sebastian} and equally clearly don't need me to 
-% explain anything about the NFSS.
-% 
-% If you want to select something like ultrabold, one way is to say:
-%\begin{verbatim}
-%    \fontseries{ub}\selectfont
-%\end{verbatim}
-% 
-% A complication is that some fount families have condensed versions, 
-% and this has to be indicated by the fount series too.  This means 
-% that the list of `standard' series can be extended to include:
-% \begin{center}
-% \begin{tabular}{ll|ll}
-% ulc & ultra light condensed     & dbc & demi bold condensed       \\
-% elc & extra light condensed     & sbc & semi bold condensed       \\
-% lc  & light condensed           & bc  & bold condensed            \\
-% mc  & normal (medium) condensed & ebc & extra bold condensed      \\
-% mbc & medium bold  condensed    & ubc & ultra bold condensed      \\
-% \end{tabular}
-% \end{center}
-% Likewise, a fount family might have extended version of some weights 
-% (Computer Modern Roman's Bold Extended is an example of this), so the 
-% `standard' list of series must also include variants like 
-% \lfntname{ulx} for ultra light extended. This is only relevant to 
-% \packname{eurofont} when it's asked to create a faked euro symbol: it 
-% has to know which series are bold (or whatever) to decide what 
-% thickness lines to draw across the C.
-% 
-% \section{How \packname{eurofont} works -- in detail}
-% \label{sec:how_it_works}
-%
-% This section is not meant to be a replacement for the rest of the 
-% documentation for \TeX nical people. The idea is that this is an 
-% intermediate step between the usual user documentation and the rather 
-% eccentrically-commented source code -- it's probably a good idea to 
-% read the earlier parts of this document before digging in to this 
-% section.
-%
-% The \packname{eurofont} package provides two commands meant to be used 
-% in documents for generating a euro symbol: \comname{euro} which just 
-% prints a euro symbol, and \comname[amount]{euros} which prints a euro 
-% symbol (generated by the \comname{euro} command) next to the argument 
-% of the command, with a small space between the two. The euro symbol is 
-% to the left of the argument by default: if you pass the 
-% \optname{right} option to the \packname{eurofont} package, the euro 
-% symbol is printed to the right of the argument of the command.
-%
-% The \comname{euros} command uses the \comname{euro} command to 
-% generate the euro symbol, so everything that applies to the 
-% \comname{euro} command also applies to the \comname{euros} command.
-%
-% I see the package code as being in several main parts: the code for 
-% handling the lists, the \comname{euro} command and supporting 
-% \comname{make...} commands, the other commands for selecting and 
-% printing euro symbols, and the code to construct fake euro symbols.  
-% This is an entirely arbitrary division; I mention it in the hope that 
-% it might explain the way I've divided up this part of the documentation.
-% 
-% Note that the \comname{make...euro} commands are all meant to be 
-% called directly by the \comname{euro} command; the idea is to give you 
-% a `top level' set of commands to modify in the configuration file any 
-% way you like, while still allowing access to any of the euro symbols 
-% the \packname{eurofont} package is set up to work with by default: 
-% the \comname{make...euro} commands are all defined in terms of other 
-% commands, and it's these other commands that do the job of actually 
-% printing a euro symbol.  You might, for example, change the 
-% \comname{makechinaeeuro} command to print `EUR':
-%\begin{verbatim}
-%    \newcommand{\makechinaeeuro}{EUR}
-%\end{verbatim}
-% and use entries in the \comname{chinaeeuro} list to select this, rather 
-% than the euro symbol I intended.  Even so, the `lower level' command 
-% \comname{chinaeeuro} will be unaffected: it will still produce the 
-% euro symbol from the China2e fount, and you will still be able to use 
-% it.  For example, you might say:
-%\begin{verbatim}
-%    \newcommand{\pgyeuro}{\chinaeeuro}
-%\end{verbatim}
-% to get a euro symbol from the China2e fount with Adobe Goudy (family 
-% name \lfntname{pgy})
-% 
-% A point that might be useful to know is this: the \packname{eurofont} 
-% package doesn't define the \comname{euro} command when it's loaded 
-% using the \comname{usepackage\ttlb eurofont\ttrb} command. What 
-% happens is that \packname{eurofont} defines the \comname{EFeuro} 
-% command to begin with: \comname{EFeuro} is just \packname{eurofont}'s 
-% \comname{euro} command under a different name. The \packname{eurofont} 
-% package arranges for the \comname{euro} command that you use in your 
-% document to be created later. The way it's done is this: 
-% \packname{eurofont} adds some code to the \comname{AtBeginDocument} 
-% hook. This code uses \TeX's \comname{let} command to make the 
-% \comname{euro} command identical to \comname{EFeuro} at the 
-% \comname{begin\ttlb document\ttrb} command. Immediately before this, 
-% the code added by \packname{eurofont} uses \TeX's \comname{let} 
-% command again to make the \comname{oldeuro} command identical to the 
-% \comname{euro} command. This means that \packname{eurofont}'s 
-% definition of \comname{euro} will over-ride any earlier definitions, 
-% while saving any earlier definitions for you to use. This might also 
-% explain strange behaviour you encounter if trying to re-define 
-% \comname{euro} yourself in a document preamble. It's probably best to 
-% do something like this:
-% \label{sec:how_it_works:redefine_euro}
-%\begin{verbatim}
-%  \documentclass{whateveryouwant}
-%    ...
-%    \usepackage{eurofont}
-%    \newcommand{\myeuro}{Some code}
-%    \AtBeginDocument{\let\euro\myeuro}
-%    ...
-%    \begin{document}
-%\end{verbatim}
-% The \packname{eurosym} package is a special case: if you pass the 
-% \optname{eurosym} option to \packname{eurofont}, \packname{eurofont} 
-% uses \comname{let} to make the \comname{ESeuro} command identical to 
-% \packname{eurosym}'s \comname{euro} command just after 
-% \packname{eurofont} has loaded \packname{eurosym}. This 
-% \comname{ESeuro} command appears in \packname{eurofont}'s code in 
-% various places: remember that it's defined to be whatever the 
-% \packname{eurosym} package defined the \comname{euro} command to be.
-% 
-% \subsection{The \comname{euro} command}\label{sec:how_euro_works}
-% 
-% The \comname{euro} command works like this: it looks at the current 
-% fount family (I shall call this \verb|<fam>| for now -- \lfntname{ptm} 
-% for Adobe Times, \lfntname{cmr} for Computer Modern Roman, and so on), 
-% and performs the following sequence of tests:
-%\begin{verbatim}
-%If <fam> is in \userlist, \makeusereuro
-% else
-% if \<fam>euro exists, \<fam>euro
-%  else
-%  if <fam> is in \texteurolist, \maketexteuro
-%   else
-%   if <fam> is in \chinaelist, \makechinaeeuro
-%    else
-%    if <fam> is in \cmlist, \makecmeuro
-%     else
-%     if <fam> is in \serifeurolist, \makeserifeuro
-%      else
-%      if <fam> is in \sanseurolist, \makesanseuro
-%       else
-%       if <fam> is in \monoeurolist, \makemonoeuro
-%        else
-%        if <fam> is in \makefakelighteurolist, \makefakelighteuro
-%         else
-%         if <fam> is in \makefakemediumeurolist, \makefakemediumeuro
-%          else
-%          if <fam> is in \makefakeheavyeurolist, \makefakeheavyeuro
-%           else \makedefaulteuro
-%           fi fi fi fi fi fi fi fi fi fi fi
-%\end{verbatim} 
-% In other words, it first looks to see if the current fount family is 
-% listed in the \comname{usereurolist}. If it is, it executes the 
-% \comname{usereuro} command and finishes. If not, it looks to see if a 
-% command \comname{<fam>euro} exists. For example, if you're typesetting 
-% with Adobe Times at that point (family name \lfntname{ptm}), it'll 
-% look for the \comname{ptmeuro} command. If this command exists, it is 
-% executed and the \comname{euro} command finishes. If not, it looks to 
-% see if the current fount family is in the \comname{texteurolist}. If 
-% it is, the \comname{texteuro} command is executed, and the 
-% \comname{euro} command finishes. This continues to the final test: if 
-% the current fount family is in the \comname{makefakeheavyeurolist}, 
-% the \comname{makefakeheavyeuro} command is executed, and the 
-% \comname{euro}command finishes. If it's got to the end of the tests 
-% and no match has been found, the \comname{defaulteuro} command is 
-% executed.
-% 
-% It's up to you to define the \comname{makeusereuro} and 
-% \comname{<fam>euro} commands.  All the other \comname{make...euro} 
-% commands may be re-defined as you see fit, but are defined by the 
-% \packname{eurofont} package to produce euro symbols.
-% 
-% \subsection{The \comname{make...euro} commands}
-% 
-% What each of these commands does by default is this:
-% 
-% \subsubsection{\comname{maketexteuro}}
-% Executes either the \comname{texteuro} command or the 
-% \comname{makefakeeuro} command. The \comname{texteuro} command is 
-% normally defined by the \packname{textcomp} package (part of the 
-% standard \LaTeX\ distribution) to print a euro symbol from the TS1 
-% encoded complement to the current fount. This TS1 encoded complement 
-% often does not exist, and even if it does exist, it usually (October 
-% 1998) does not have a euro symbol. The \comname{makefakeeuro} command 
-% is described in section~\vref{sec:howitworks:makefakeeuro}. The 
-% \packname{eurofont} package tries to load the \packname{textcomp} 
-% package by default; see section~\vref{sec:all_options} for more 
-% details.
-% 
-% The decision on whether to execute \comname{texteuro} or 
-% \comname{makefakeeuro} is made like this: the \comname{texteuro} 
-% command is executed if these three conditions are met: 1)~the current 
-% fount family is not listed in \comname{faketext\-eurolist}, 2)~the 
-% \packname{textcomp} package has been loaded, and 3)~that the fount 
-% definition file \filename{ts1<fam>.fd} exists (where |<fam>| is the 
-% current fount family name). That \filename{fd} file is the thing that 
-% tells \LaTeX\ where to find the symbol asked for in the 
-% \comname{texteuro} command defined by the \packname{textcomp} package: 
-% if it doesn't exist, the current fount family certainly doesn't have a 
-% euro symbol available in the expected place.
-% 
-% The decision isn't foolproof: there's no way that \TeX\ can check for 
-% the existence of a real glyph in a fount (the matter is complicated 
-% greatly by virtual founts and `missing glyph' rule boxes), so 
-% \comname{maketexteuro}'s checks mustn't be relied on.
-% 
-% \subsubsection{\comname{makefakeeuro}}
-% \label{sec:howitworks:makefakeeuro}
-% This command first checks to see if the command 
-% \comname{<fam>fakeeuro} exists, where |<fam>| is the name of the 
-% current fount family; if this command exists, it's executed. If not, 
-% \comname{makefakeeuro} then checks for the presence of the current 
-% fount family name in (in this order) \comname{EFfakelightlist}, 
-% \comname{EFfakemediumlist}, and \comname{EFfake\-heavylist}. If it finds 
-% a match, it executes the corresponding \comname{makefake...euro} 
-% command; these are explained below. If it finds no match, it executes 
-% the \comname{makefakemediumeuro} command. \comname{makefakeeuro} 
-% doesn't appear directly in the definition of the \comname{euro} 
-% command.
-% 
-% \subsubsection{\comname{makechinaeeuro}}
-% \label{sec:howitworks:makechinaeeuro}
-% Executes the \comname{chinaeeuro} command, which prints a fake 
-% bold euro symbol created from the China2e fount's euro symbol if the 
-% current \comname{fontseries} is listed in the 
-% \comname{EFbold\-serieslist} or the \comname{EFultraboldserieslist}, 
-% and a straight euro symbol from the China2e fount otherwise.  The 
-% \comname{chinaeeuro} command is described in 
-% section~\vref{sec:howitworks:chinaeeuro}.
-% 
-% \subsubsection{\comname{makecmeuro}} 
-% \label{sec:howitworks:makecmeuro}
-% If you've given the \optname{eurosym} option to the 
-% \packname{eurofont} package and the \packname{eurosym} package has 
-% been loaded successfully, \comname{makecmeuro} executes the 
-% \comname{ESeuro} command which prints the specified \packname{eurosym} 
-% euro symbol, as described in section~\vref{sec:howitworks:makecmeuro}. 
-% Otherwise, the \comname{cmeuro} command is executed, which gives you 
-% either a euro symbol from the text companion founts, or a faked euro 
-% symbol; this faked euro symbol is made with light rules for Computer 
-% Modern Roman and medium weight rules for Computer Modern Sanserif 
-% and Typewriter. The \comname{cmeuro} command is described in 
-% section~\vref{sec:howitworks:cmeuro}.
-% 
-% \subsubsection{\comname{makeserifeuro}} 
-% \label{sec:howitworks:makeserifeuro}
-% This executes the \comname{serifeuro} command, described in 
-% section~\vref{sec:howitworks:serifeuro}. By default, 
-% \comname{serifeuro} executes the \comname{zpeureuro} command, 
-% described in section~\vref{sec:howitworks:zpeureuro}, which prints a 
-% euro symbol from Adobe's Euroserif fount. If you have given the 
-% \optname{marvosym} option to \packname{eurofont} and you have not used 
-% the \optname{eurosym} option, the \comname{serifeuro} command will 
-% instead execute the \comname{marvosymserifeuro} command, described in 
-% section~\vref{sec:howitworks:marvosymserifeuro}: this will try to 
-% print a seriffed euro symbol from the Marvosym fount. If the current 
-% fount series is in \comname{EFboldserieslist} or 
-% \comname{EFultraboldserieslist}, you'll get a faked bold euro from the 
-% Marvosym fount. The default setup assumes that your \dvidriver can 
-% print a faked italic version of the Marvosym fount.
-% 
-% If you've given the \optname{eurosym} option to the 
-% \packname{eurofont} package and the \packname{eurosym} package has 
-% been loaded successfully, the \comname{serifeuro} command prints the 
-% specified \packname{eurosym} euro symbol by executing the 
-% \comname{ESeuro} command. The \comname{ESeuro} command is described in 
-% section~\vref{sec:howitworks:ESeuro}.
-% 
-% \subsubsection{\comname{makesanseuro}}
-% \label{sec:howitworks:makesanseuro}
-% This executes the \comname{sanseuro} command, described in 
-% section~\vref{sec:howitworks:sanseuro}. By default, \comname{sanseuro} 
-% executes the \comname{zpeusseuro} command, described in 
-% section~\vref{sec:howitworks:zpeusseuro}, which prints a euro symbol 
-% from Adobe's Eurosans fount. If you have given the \optname{marvosym} 
-% option to \packname{eurofont} and you have not used the 
-% \optname{eurosym} option, the \comname{sanseuro} command will instead 
-% execute the \comname{marvosymsanseuro} command, described in 
-% section~\vref{sec:howitworks:marvosymsanseuro}: this will try to print 
-% a sanserif euro symbol from the Marvosym fount. If the current fount 
-% series is in \comname{EFboldserieslist} or the 
-% \comname{EFultraboldserieslist}, you'll get a faked bold euro from the 
-% Marvosym fount. The default setup assumes that your \dvidriver can 
-% print a faked italic version of the Marvosym fount.
-% 
-% If you've given the \optname{eurosym} option to the 
-% \packname{eurofont} package and the \packname{eurosym} package has 
-% been loaded successfully, the \comname{sanseuro} command prints the 
-% specified \packname{eurosym} euro symbol by executing the \comname{ESeuro} 
-% command.
-% 
-% \subsubsection{\comname{makemonoeuro}} 
-% \label{sec:howitworks:makemonoeuro}
-% This executes the \comname{monoeuro} command, described in 
-% section~\vref{sec:howitworks:monoeuro}. By default, 
-% \comname{monoeuro} executes the \comname{zpeutteuro} command, 
-% described in section~\vref{sec:howitworks:zpeutteuro}, which prints a 
-% euro symbol from Adobe's Euroserif fount. If you have given the 
-% \optname{marvosym} option to \packname{eurofont} and you have not used 
-% the \optname{eurosym} option, the \comname{monoeuro} command will 
-% instead execute the \comname{marvosymmonoeuro} command, described in 
-% section~\vref{sec:howitworks:marvosymserifeuro}: this will try to 
-% print a monospaced euro symbol from the Marvosym fount. If the current 
-% fount series is in \comname{EFboldserieslist} or 
-% \comname{EFultraboldserieslist}, you'll get a faked bold euro from the 
-% Marvosym fount. The default setup assumes that your \dvidriver can 
-% print a faked italic version of the Marvosym fount.
-% 
-% If you've given the \optname{eurosym} option to the 
-% \packname{eurofont} package and the \packname{eurosym} package has 
-% been loaded successfully, the \comname{sanseuro} command prints the 
-% specified \packname{eurosym} euro symbol by executing the \comname{ESeuro} 
-% command.
-% 
-% \subsubsection{\comname{makefakelighteuro}} 
-% \label{sec:howitworks:makefakelighteuro}
-% If the command \comname{<fam>fakeeuro} exists (where |<fam>| is the 
-% name of the current fount family), execute it. Otherwise, execute the 
-% \comname{fakelighteuro} command, which prints a euro symbol faked from 
-% a letter C with two light rules printed over it; you can find out more 
-% about this in section~\vref{sec:howitworks:fakelighteuro}. The 
-% \comname{makefakelighteuro} command is unaffected by the 
-% \optname{eurosym} option.
-% 
-% 
-% \subsubsection{\comname{makefakemediumeuro}} 
-% \label{sec:howitworks:makefakemediumeuro}
-% If the command \comname{<fam>fakeeuro} exists (where |<fam>| is the 
-% name of the current fount family), execute it. Otherwise, execute the 
-% \comname{fakemediumeuro} command, which prints a euro symbol faked 
-% from a letter C with two light rules printed over it; you can find out 
-% more about this in section~\vref{sec:howitworks:fakemediumeuro}. The 
-% \comname{makefakemediumeuro} command is unaffected by the 
-% \optname{eurosym} option.
-% 
-% \subsubsection{\comname{makefakeheavyeuro}} 
-% \label{sec:howitworks:makefakeheavyeuro}
-% If the command \comname{<fam>fakeeuro} exists (where |<fam>| is the 
-% name of the current fount family), execute it. Otherwise, execute the 
-% \comname{fakeheavyeuro} command, which prints a euro symbol faked 
-% from a letter C with two light rules printed over it; you can find out 
-% more about this in section~\vref{sec:howitworks:fakeheavyeuro}. The 
-% \comname{makefakeheavyeuro} command is unaffected by the 
-% \optname{eurosym} option.
-% 
-% \subsubsection{\comname{makedefaulteuro}}
-% \label{sec:howitworks:makedefaulteuro}
-% Executes the \comname{makefakeeuro} command. This usually prints a 
-% euro faked with medium weight rules. See 
-% section~\vref{sec:howitworks:makefakeeuro} for more details.
-% 
-% \subsection{Other commands to print euro symbols}
-% 
-% \subsubsection{\comname{chinaeeuro}}
-% \label{sec:howitworks:chinaeeuro}
-% 
-% This prints the euro symbol from the China2e fount. There is only one 
-% euro character available, in the upright shape and medium weight only. 
-% This command uses the \comname{SelectOnWeight} command to print either 
-% a China2e euro symbol in its natural state (for light and medium 
-% weights), or a `poor man's bold' version for bold and ultra bold 
-% weights.
-% 
-% The \comname{SelectOnWeight} command is described in 
-% section~\vref{sec:howitworks:selectonweight}.
-% 
-% \subsubsection{\comname{cmeuro}}
-% \label{sec:howitworks:cmeuro}
-% 
-% The \comname{cmeuro} command executes the \comname{texteuro} command to 
-% print a euro symbol from the TS1 encoded complement of the current 
-% fount if these three conditions are met: 1) the current fount family 
-% is not in the \comname{faketexteurolist}; 2) the command 
-% \comname{texteuro} exists; and 3) the file \filename{ts1<fam>.fd} 
-% exists, where \filename{<fam>} is the name of the current fount 
-% family. If all three conditions are not met, \comname{cmeuro} executes 
-% the \comname{makefakeeuro} command to print a faked euro symbol; this 
-% command is described in section~\vref{sec:howitworks:makefakeeuro}.
-%
-% \subsubsection{\comname{EFeuro}}
-% \label{sec:howitworks:EFeuro}
-% 
-% This is the name under which the \comname{euro} command is defined 
-% originally; the \packname{eurofont} package adds some code to the 
-% standard \LaTeX\ \comname{AtBeginDocument} hook that makes the 
-% \comname{euro} command equivalent to the \comname{EFeuro} command 
-% (using the primitive \TeX\ \comname{let} command). This code added to 
-% the \comname{AtBeginDocument} hook is executed, unsurprisingly, at the 
-% \comname{begin\ttlb document\ttrb} command. It's best not to use the 
-% \comname{EFeuro} command yourself unless you have a particular need 
-% to, but if you're writing a class or package file that uses 
-% \packname{eurofont}, you might have such a need.
-% 
-% The \comname{EFeuro} command is identical to the \comname{euro} 
-% command, but they are different commands. If you want to change the 
-% \comname{euro} command in your document, you should do so after the 
-% \comname{begin\ttlb document\ttrb} command. One suggestion on how to 
-% do this is in section~\vref{sec:how_it_works:redefine_euro}. This way 
-% of re-defining the \comname{euro} command means you still have access 
-% to \packname{eurofont}'s original \comname{euro} command under the 
-% name \comname{EFeuro}. The \comname{EFeuro} command shouldn't be used 
-% directly in a \LaTeX\ document. It's not that anything terrible will 
-% happen if you do, just that \LaTeX\ convention states that commands 
-% with mixed-case names are meant for use by class and package writers 
-% only, and it seemed right to me to add this restriction to the 
-% \comname{EFeuro} command.
-% 
-% \subsubsection{\comname{ESeuro}}
-% \label{sec:howitworks:ESeuro}
-% 
-% If you tell the \packname{eurofont} package to load the 
-% \packname{eurosym} package, \packname{eurofont} makes the 
-% \comname{ESeuro} command identical to the \comname{euro} command 
-% defined by \packname{eurosym}. This means that \packname{eurosym}'s 
-% \comname{euro} command is still available as \comname{ESeuro}, even 
-% though \packname{eurofont} re-defines the \comname{euro} command to be 
-% something completely different. It's probably best not to use the 
-% \comname{ESeuro} command unless you have no choice in the matter, as 
-% is often the case when writing package files.
-% 
-% In case you're wondering, the \comname{ESeuro} command will be the 
-% same as the \comname{oldeuro} command if \packname{eurofont} has 
-% loaded \packname{eurosym}.
-% 
-% \subsubsection{\comname{oldeuro}}
-% \label{sec:howitworks:oldeuro}
-% 
-% The \packname{eurofont} package adds another bit of code to the 
-% \comname{AtBeginDocument} hook: this code not only sets the 
-% \comname{euro} command to be whatever \comname{EFeuro} has been 
-% defined as (as mentioned in section~\vref{sec:howitworks:EFeuro}), but 
-% just before that, the code sets the \comname{oldeuro} command to be 
-% whatever the \comname{euro} command was at that instant. This means 
-% that any package which has defined a \comname{euro} command has not 
-% wasted its effort: its command is still available as 
-% \comname{oldeuro}.
-% 
-% As mentioned above, the \comname{ESeuro} command will be the 
-% same as the \comname{oldeuro} command if \packname{eurofont} has 
-% loaded \packname{eurosym}.
-% 
-% 
-% \subsubsection{\comname{sanseuro}}
-% \label{sec:howitworks:sanseuro}
-% 
-% Depending on what you've asked for in the options to the 
-% \packname{eurofont} package, this command executes one of three 
-% commands. By default, or if you've used the \optname{adobeeurofonts} 
-% option, it executes \comname{zpeusseuro}; if you've used the 
-% \optname{marvosym} option, it executes \comname{marvosymsanseuro}; and 
-% if you've used the eurosym option (which over-rides the other two), it 
-% executes \comname{ESeuro}.
-%
-% The \comname{zpeusseuro} command is described in 
-% section~\vref{sec:howitworks:zpeusseuro}; the 
-% \comname{marvosymsans\-euro} is described in 
-% section~\vref{sec:howitworks:marvosymsanseuro}; and the 
-% \comname{ESeuro} command is described in 
-% section~\vref{sec:howitworks:ESeuro}.
-% 
-% \subsubsection{\comname{serifeuro}}
-% \label{sec:howitworks:serifeuro}
-% 
-% Depending on what you've asked for in the options to the 
-% \packname{eurofont} package, this command executes one of three 
-% commands. By default, or if you've used the \optname{adobeeurofonts} 
-% option, it executes \comname{zpeureuro}; if you've used the 
-% \optname{marvosym} option, it executes \comname{marvosymserifeuro}; and 
-% if you've used the eurosym option (which over-rides the other two), it 
-% executes \comname{ESeuro}.
-%
-% The \comname{zpeureuro} command is described in 
-% section~\vref{sec:howitworks:zpeureuro}; the 
-% \comname{marvosymserif\-euro} is described in 
-% section~\vref{sec:howitworks:marvosymserifeuro}; and the 
-% \comname{ESeuro} command is described in 
-% section~\vref{sec:howitworks:ESeuro}.
-% 
-% \subsubsection{\comname{monoeuro}}
-% \label{sec:howitworks:monoeuro}
-% 
-% Depending on what you've asked for in the options to the 
-% \packname{eurofont} package, this command executes one of three 
-% commands. By default, or if you've used the \optname{adobeeurofonts} 
-% option, it executes \comname{zpeutteuro}; if you've used the 
-% \optname{marvosym} option, it executes \comname{marvosymmonoeuro}; and 
-% if you've used the eurosym option (which over-rides the other two), it 
-% executes \comname{ESeuro}.
-%
-% The \comname{zpeutteuro} command is described in 
-% section~\vref{sec:howitworks:zpeureuro}; the 
-% \comname{marvosymmono\-euro} is described in 
-% section~\vref{sec:howitworks:marvosymmonoeuro}; and the 
-% \comname{ESeuro} command is described in 
-% section~\vref{sec:howitworks:ESeuro}.
-% 
-% \subsubsection{\comname{zpeureuro}}
-% \label{sec:howitworks:zpeureuro}
-% 
-% This command prints a euro symbol from one of Adobe's four Euroserif 
-% founts (Roman, Italic, Bold, or Bold Italic).  The selection is done 
-% using \LaTeX's usual fount selection mechanism.
-% 
-% \subsubsection{\comname{zpeusseuro}}
-% \label{sec:howitworks:zpeusseuro}
-% 
-% This command prints a euro symbol from one of Adobe's four Eurosans 
-% founts (Roman, Italic, Bold, or Bold Italic).  The selection is done 
-% using \LaTeX's usual fount selection mechanism.
-%
-% \subsubsection{\comname{zpeutteuro}}
-% \label{sec:howitworks:zpeutteuro}
-% 
-% This command prints a euro symbol from one of Adobe's four Euromono 
-% founts (Roman, Italic, Bold, or Bold Italic).  The selection is done 
-% using \LaTeX's usual fount selection mechanism.
-% 
-% \subsubsection[\comname{marvosymeuro}]
-% {\comname{marvosymeuro}\comarg{char}}
-% \label{sec:howitworks:marvosymeuro}
-% 
-% This command is used by \comname{marvosymserifeuro} (and friends) to 
-% print a euro symbol from the Marvosym fount. Like the 
-% \comname{chinaeeuro} command, it uses the \comname{SelectOnWeight} 
-% command -- covered in section~\vref{sec:howitworks:selectonweight} -- 
-% to print a normal euro symbol for medium and light weight founts, and 
-% produces a `poor man's bold' version when you're using a bold or ultra 
-% bold fount.
-% 
-% The \comname{marvosymeuro} command takes a single argument, which is 
-% the number of the character to be printed: 99 for the sanserif euro symbol, 
-% 100 for the monospaced euro symbol, and 101 for the seriffed euro symbol.
-% 
-% \subsubsection{\comname{marvosymsanseuro}}
-% \label{sec:howitworks:marvosymsanseuro}
-% 
-% The \comname{marvosymsanseuro} command prints a sanserif euro 
-% symbol from the Marvosym fount by executing 
-% \comname{marvosymeuro\ttlb 99\ttrb}.
-% 
-% \subsubsection{\comname{marvosymserifeuro}}
-% \label{sec:howitworks:marvosymserifeuro}
-% 
-% The \comname{marvosymsanseuro} command prints a seriffed euro 
-% symbol from the Marvosym fount by executing 
-% \comname{marvosymeuro\ttlb 101\ttrb}.
-% 
-% \subsubsection{\comname{marvosymmonoeuro}}
-% \label{sec:howitworks:marvosymmonoeuro}
-% 
-% The \comname{marvosymsanseuro} command prints a monospaced euro 
-% symbol from the Marvosym fount by executing 
-% \comname{marvosymeuro\ttlb 100\ttrb}.
-% 
-% \subsubsection{\comname{cmrfakeeuro}}
-% \label{sec:howitworks:cmrfakeeuro}
-% 
-% This command creates a euro symbol faked with light rules, using the 
-% \comname{fakelight\-euro} command which is described in 
-% section~\vref{sec:howitworks:fakelighteuro}. Note that the 
-% \comname{euro} command will execute \comname{<fam>fakeeuro} (where 
-% |<fam>| is the current fount family) if it's asked to fake a euro 
-% symbol using any of the \comname{makefake...euro} commands. This means 
-% that you need to re-define \comname{cmrfakeeuro} if you want to change 
-% the sort of faked euro symbol you get with Computer Modern Roman; just 
-% putting |cmr| in (say) \comname{fakemediumlist} won't do the job.
-% 
-% \subsubsection{\comname{cmssfakeeuro}}
-% \label{sec:howitworks:cmssfakeeuro}
-% 
-% This command creates a euro symbol faked with medium rules, using the 
-% \comname{fake\-mediumeuro} command which is described in 
-% section~\vref{sec:howitworks:fakemediumeuro}. Note that the 
-% \comname{euro} command will execute \comname{<fam>fakeeuro} (where 
-% |<fam>| is the current fount family) if it's asked to fake a euro 
-% symbol using any of the \comname{makefake...euro} commands. This means 
-% that you need to re-define \comname{cmssfakeeuro} if you want to 
-% change the sort of faked euro symbol you get with Computer Modern 
-% Sanserif; just putting |cmss| in (say) \comname{fakelightlist} won't 
-% do the job.
-% 
-% \subsubsection{\comname{cmttfakeeuro}}
-% \label{sec:howitworks:cmttfakeeuro}
-% 
-% This command creates a euro symbol faked with medium rules, using the 
-% \comname{fake\-mediumeuro} command which is described in 
-% section~\vref{sec:howitworks:fakemediumeuro}. Note that the 
-% \comname{euro} command will execute \comname{<fam>fakeeuro} (where 
-% |<fam>| is the current fount family) if it's asked to fake a euro 
-% symbol using any of the \comname{makefake...euro} commands. This means 
-% that you need to re-define \comname{cmttfakeeuro} if you want to 
-% change the sort of faked euro symbol you get with Computer Modern 
-% Typewriter; just putting |cmtt| in (say) \comname{fakelightlist} won't 
-% do the job.
-% 
-% \subsubsection{\comname{pzcfakeeuro}}
-% \label{sec:howitworks:pzcfakeeuro}
-% 
-% This command creates a euro symbol faked with medium rules, using the 
-% \comname{fakemediumeuro[-0.1ex]} command. The optional argument 
-% lowers the height of the cross-strokes by 0.1\,ex to match the C in 
-% Zapf Chancery.
-% 
-% Note that the \comname{euro} command will execute 
-% \comname{<fam>fakeeuro} (where |<fam>| is the current fount family) if 
-% it's asked to fake a euro symbol using any of the 
-% \comname{makefake...euro} commands. This means that you need to 
-% re-define \comname{pzcfakeeuro} if you want to change the sort of 
-% faked euro symbol you get with Zapf Chancery; just putting |pzc| in 
-% (say) \comname{fakelightlist} won't do the job.
-% 
-% \subsection{Commands used to produce faked euro symbols}
-% 
-% \subsubsection[\comname{fakeheavyeuro}]
-% {\comname{fakeheavyeuro}\comoptarg{lift}\comoptarg{slant corr}}
-% \label{sec:howitworks:fakeheavyeuro}
-% 
-% This is one of three similar commands: this command prints a euro 
-% symbol faked with heavy rules. It's executed by the \comname{euro} 
-% command if the current fount family is in the \comname{fakeheavylist}. 
-% It takes two optional arguments: the first one, \comoptarg{lift}, 
-% lifts the cross-strokes of the faked euro symbol by the specified 
-% length; the default length is 0\,pt. The second optional argument, 
-% \comoptarg{slant corr}, is a percentage factor by which the nominal 
-% slant of the fount is multiplied by before calculating the horizontal 
-% position of the rules. Its default value is 100 (i.e., multiply the 
-% slant by $100/100 = 1$); this argument never has any effect on upright 
-% founts because they have no slant.
-% 
-% If you pass one optional argument to \comname{fakeheavyeuro}, it is 
-% interpreted as being the \comoptarg{lift} argument.
-% 
-% \comname{fakeheavyeuro} is defined to be one of these three:
-% \begin{center}
-% \begin{tabular}{ll}
-% \textbf{Option}                & \textbf{Command}                \\[1ex]
-% \optname{noslantfakeeuro}      & \comname{heavyruleeuronoslant}  \\
-% \optname{normalslantfakeeuro}  & \comname{heavyruleeuronorm}     \\
-% \optname{bigslantfakeeuro}     & \comname{heavyruleeurobigslant} \\
-% \end{tabular}
-% \end{center}
-% The optional argument to \comname{fakeheavyeuro} is passed as the 
-% first argument (rule lift) to the given \comname{heavyrule\-euro...} 
-% command; it's 0\,ex by default.  The second argument (slant 
-% correction factor) to the \comname{heavyrule\-euro...} command is 
-% left blank, so it defaults to 100.  See 
-% section~\vref{sec:howitworks:EFruleeuro} for more about this.
-% 
-% This command was written for the sake of symmetry more than 
-% anything else; I would be surprised if anyone found a real use for 
-% it.
-% 
-% \subsubsection[\comname{fakelighteuro}]
-% {\comname{fakelighteuro}\comoptarg{lift}\comoptarg{slant corr}}
-% \label{sec:howitworks:fakelighteuro}
-% 
-% This is one of three similar commands: this command prints a euro symbol 
-% faked with light rules. It's executed by the \comname{euro} command if 
-% the current fount family is in the \comname{fakelightlist}. It takes 
-% two optional arguments: the first one, \comoptarg{lift}, lifts the 
-% cross-strokes of the faked euro symbol by the specified length; the 
-% default length is 0\,pt. The second optional argument, \comoptarg{slant 
-% corr}, is a percentage factor by which the nominal slant of the fount 
-% is multiplied by before calculating the horizontal position of the 
-% rules. Its default value is 100 (i.e., multiply the 
-% slant by $100/100 = 1$); this argument never has any effect on upright 
-% founts because they have no slant.
-% 
-% If you pass one optional argument to \comname{fakeheavyeuro}, it is 
-% interpreted as being the \comoptarg{lift} argument.
-% 
-% \comname{fakelighteuro} is defined by the options in 
-% \packname{eurofont} to be one of these three; 
-% \comname{lightruleeuronorm} by default.
-% \begin{center}
-% \begin{tabular}{ll}
-% \textbf{Option}                & \textbf{Command}                \\[1ex]
-% \optname{noslantfakeeuro}      & \comname{lightruleeuronoslant}  \\
-% \optname{normalslantfakeeuro}  & \comname{lightruleeuronorm}     \\
-% \optname{bigslantfakeeuro}     & \comname{lightruleeurobigslant} \\
-% \end{tabular}
-% \end{center}
-% The optional argument to \comname{fakelighteuro} is passed as the 
-% first argument (rule lift) to the given \comname{lightrule\-euro...} 
-% command; it's 0\,ex by default.  The second argument (slant 
-% correction factor) to the \comname{lightrule\-euro...} command is 
-% left blank, so it defaults to 100.  See 
-% section~\vref{sec:howitworks:EFruleeuro} for more about this.
-% 
-% \subsubsection[\comname{fakemediumeuro}]
-% {\comname{fakemediumeuro}\comoptarg{lift}\comoptarg{slant corr}}
-% \label{sec:howitworks:fakemediumeuro}
-% 
-% This is one of three similar commands: this command prints a euro symbol 
-% faked with light rules. It's executed by the \comname{euro} command if 
-% the current fount family is in the \comname{fakemediumlist}. It takes 
-% two optional arguments: the first one, \comoptarg{lift}, lifts the 
-% cross-strokes of the faked euro symbol by the specified length; the 
-% default length is 0\,pt. The second optional argument, \comoptarg{slant 
-% corr}, is a percentage factor by which the nominal slant of the fount 
-% is multiplied by before calculating the horizontal position of the 
-% rules.  Its default value is 100 (i.e., multiply the 
-% slant by $100/100 = 1$); this argument never has any effect on upright 
-% founts because they have no slant.
-% 
-% If you pass one optional argument to \comname{fakeheavyeuro}, it is 
-% interpreted as being the \comoptarg{lift} argument.
-% 
-% \comname{fakemediumeuro} is defined by the options in 
-% \packname{eurofont} to be one of these three; 
-% \comname{lightruleeuronorm} by default.
-% \begin{center}
-% \begin{tabular}{ll}
-% \textbf{Option}                & \textbf{Command}                 \\[1ex]
-% \optname{noslantfakeeuro}      & \comname{mediumruleeuronoslant}  \\
-% \optname{normalslantfakeeuro}  & \comname{mediumruleeuronorm}     \\
-% \optname{bigslantfakeeuro}     & \comname{mediumruleeurobigslant} \\
-% \end{tabular}
-% \end{center}
-% The optional argument to \comname{fakemediumeuro} is passed as the 
-% first argument (rule lift) to the given \comname{mediumrule\-euro...} 
-% command; it's 0\,ex by default.  The second argument (slant 
-% correction factor) to the \comname{mediumrule\-euro...} command is 
-% left blank, so it defaults to 100. See 
-% section~\vref{sec:howitworks:EFruleeuro} for more about this.
-% 
-% \subsubsection{\comname{EFruleeuro}}\label{sec:EFruleeuro}
-% \label{sec:howitworks:EFruleeuro}
-% 
-% The command generates a euro symbol from a `C' with a pair of rules 
-% drawn on top of it. \comname{EFruleeuro} is not meant to be used in 
-% documents directly; if you need it, you should follow the 
-% \packname{eurofont} package's example and use it in the definition of 
-% a new command to generate a euro symbol. The 
-% \comname{mediumruleeuronorm} command and others show you a way of 
-% doing this.
-% 
-% \comname{EFruleeuro} has six arguments:
-% \begin{center}
-%\begin{tabbing}
-%    \comname{EFruleeuro}\= \\
-%      \> \comarg{backshift \%age}\comarg{top rule width \%age}\relax
-%                                 \comarg{bottom rule width \%age}\\
-%      \> \comarg{rule thickness}\comarg{rule vertical spacing}\relax
-%                                  \comarg{rule vertical offset}\\
-%      \> \comarg{slant correction factor \%age}\\
-%\end{tabbing}
-% \end{center}
-% 
-% The first three arguments are numbers which are interpreted as a 
-% percentage of the width of a letter `C' in the current fount. The next 
-% three arguments are normal \LaTeX\ lengths. The final argument is 
-% another number that's interpreted as a percentage: it's the percentage 
-% by which the nominal slant of a fount (as specified in the 
-% \filename{tfm} file) is multiplied by before working out the 
-% horizontal position of the cross-strokes of a faked euro symbol; if 
-% this slant correction factor argument is left blank, it defaults to 
-% 100 (multiply by $100/100 = 1$, so it has no effect), which is what it 
-% should be most of the time. This slant correction factor never has any 
-% effect on upright founts, since they have a slant of 0.
-% 
-% The \comarg{rule vertical offset} and \comarg{slant correction factor 
-% \%age} arguments are needed because the letters as printed are 
-% sometimes not quite what the metrics files would have you believe.
-% 
-% The way the whole thing works is this: the \comname{EFruleeuro} 
-% command begins by putting a letter `C' on the page. It then backs up 
-% by |<backshift>|, and draws the two rules. Each rule is
-% |<rule thickness>| thick, and the centre lines of the rules are 
-% separated by a vertical distance of |<rule spacing>| (if this 
-% dimension is 0\,pt, the rules are printed on top of each other and it 
-% appears that you only have one rule printed). The top rule has a 
-% horizontal length of |<top rule width>|, and the bottom rule has a 
-% horizontal length of |<bottom rule width>|. The rules are positioned 
-% half-way up the `C', plus |<rule vertical offset>|; this parameter is 
-% needed because some letters have metrics that don't quite tie up with 
-% reality. For example, the C in Zapf Chancery is actually lower than 
-% the metrics would suggest, so \packname{eurofont}'s calculations go 
-% awry and a `hand-correction' of -0.1\,ex needs to be applied. The 
-% following code is executed by \packname{eurofont}'s 
-% \comname{pzcfakeeuro} command:
-%\begin{verbatim}
-%    \EFruleeuro{110}{80}{72}{0.04ex}{0.27ex}{-0.1ex}{}
-%\end{verbatim}
-% This creates a euro symbol faked from a `C' with a pair of horizontal 
-% rules drawn across it.
-% 
-% These rules have their left-hand edge 110\% of the width of the C to 
-% the left of the right-hand edge of the C. The top rule has a width of 
-% 80\% of the width of the C; the bottom rule has a width of 72\% of the 
-% width of the C.
-% 
-% The rules are 0.04\,ex thick, and the distance between the centre 
-% lines of the rules is 0.27\,ex. The centre line of the pair of rules 
-% is usually half way up the C according to the fount metrics; in this 
-% case, these rules are shifted down from this position by 0.1\,ex.
-% 
-% If the C used by \comname{EFruleeuro} is an italic C, the code to 
-% place the rules takes this into account: it shifts the rules an 
-% appropriate amount to the right. The rules are also staggered slightly 
-% to match the slant of the C -- rather than put both rules directly 
-% above each other at the specified position (taking the italic 
-% correction into account), the top rule is placed a touch to the 
-% right and the bottom rule a touch to the left.
-% 
-% And this brings me on to the final parameter: the slant correction 
-% factor.  This is needed because some founts have italic or oblique 
-% versions in which the slant angle specified in the fount metrics file 
-% doesn't match the real slant of the printed letters.  I have no idea 
-% why this is the case, but I do know that it means that 
-% \comname{EFruleeuro}'s careful calculations to place the rules 
-% correctly produce ugly results when working with these slanted 
-% founts.  This slant correction factor is the percentage by which the 
-% slant parameter is scaled by.  If the rules are being printed too far 
-% to the left (so that they protrude out the back of the C too far), you 
-% might try something like this:
-%\begin{verbatim}
-%    \EFruleeuro{110}{80}{72}{0.04ex}{0.27ex}{0ex}{200}
-%\end{verbatim}
-% which works very well with Adobe Optima -- the line above tells the 
-% command to work on the basis that the slant is twice as great as 
-% specified in the metrics file. Since the \packname{fontinst}-generated 
-% \filename{tfm} file has the slant as $11^{\circ}$ ($1^{\circ}$ less 
-% than in the \filename{afm} file due to rounding errors), and the slant 
-% I measured is $21^{\circ}$, you can see that this should work well; 
-% if you have this fount youself, you will see that it does indeed work 
-% very well.
-% 
-% On the other hand, Bitstream Optima has a specified slant of 
-% $10^{\circ}$, but a measured slant of $5^{\circ}$.  This means the 
-% rules are placed too far to the right, so they don't protrude out the 
-% back of the C far enough.  The obvious thing to try in this case is:
-%\begin{verbatim}
-%    \EFruleeuro{110}{80}{72}{0.04ex}{0.27ex}{0ex}{50}
-%\end{verbatim}
-% which is a definite improvement but far from perfect. This is because 
-% the italic C in this fount is positioned further to the left than 
-% expected for reasons which are rather involved.  There's no easy 
-% and good way to deal with this without adding yet another parameter to 
-% the \comname{EFruleeuro} command, which I decided wasn't justified. In 
-% the case of Bitstream Optima, you might prefer the results you get 
-% with a slant correction factor of 25\% or perhaps even 0\%.
-% 
-% A final note: in an attempt to reduce the Byzantine complexity of the 
-% \comname{EFruleeuro} command to manageable levels, I have assumed that 
-% the cross-strokes do not extend beyond the right-hand limit of the 
-% letter `C' which they're printed over. This shouldn't cause any 
-% problems unless you do something strange.
-%
-% \subsubsection[\comname{mediumruleeuronorm}]
-% {\comname{mediumruleeuronorm}\comarg{lift}\comarg{slant corr}}
-% \label{sec:howitworks:mediumruleeuronorm}
-% 
-% This command uses the \comname{SelectOnWeight} command (see 
-% section~\vref{sec:howitworks:selectonweight}) to print a faked euro 
-% symbol intended to match a medium weight fount family like Times: 
-% thicker rules are used for bolder founts in the family, and thinner 
-% rules are used for lighter founts in the family. The two rules drawn 
-% across the C have slightly different lengths, approximately the same 
-% as in the official euro symbol.
-% 
-% \comname{mediumruleeuronorm} takes two arguments: the first, the 
-% length \comarg{lift}, raises the cross-stroke rules by the specified 
-% amount from their default position half way up the `C'; and the 
-% second, the number \comarg{slant corr}, is interpreted as the 
-% percentage by which the specified slant of the current fount is 
-% multiplied before calculating the horizontal position of the 
-% cross-strokes. See the explanation of \comname{EFruleeuro} in 
-% section~\vref{sec:howitworks:EFruleeuro} for a fuller description of 
-% these parameters with examples.
-% 
-% \subsubsection[\comname{mediumruleeuronoslant}]
-% {\comname{mediumruleeuronoslant}\comarg{lift}\comarg{slant corr}}
-% \label{sec:howitworks:mediumruleeuronoslant}
-% 
-% This command uses the \comname{SelectOnWeight} command (see 
-% section~\vref{sec:howitworks:selectonweight}) to print a faked euro 
-% symbol intended to match a medium weight fount family like Times: 
-% thicker rules are used for bolder founts in the family, and thinner 
-% rules are used for lighter founts in the family. The two rules drawn 
-% across the C have the same length.
-% 
-% \comname{mediumruleeuronoslant} takes two arguments: the first, the 
-% length \comarg{lift}, raises the cross-stroke rules by the specified 
-% amount from their default position half way up the `C'; and the 
-% second, the number \comarg{slant corr}, is interpreted as the 
-% percentage by which the specified slant of the current fount is 
-% multiplied before calculating the horizontal position of the 
-% cross-strokes. See the explanation of \comname{EFruleeuro} in 
-% section~\vref{sec:howitworks:EFruleeuro} for a fuller description of 
-% these parameters with examples.
-% 
-% \subsubsection[\comname{mediumruleeurobigslant}]
-% {\comname{mediumruleeurobigslant}\comarg{lift}\comarg{slant corr}}
-% \label{sec:howitworks:mediumruleeurobigslant}
-% 
-% This command uses the \comname{SelectOnWeight} command (see 
-% section~\vref{sec:howitworks:selectonweight}) to print a faked euro 
-% symbol intended to match a medium weight fount family like Times: 
-% heavier rules are used for bolder founts in the family, and lighter 
-% rules are used for lighter founts in the family. The two rules drawn 
-% across the C have quite different lengths, following the example of 
-% the China2e euro symbol.
-% 
-% \comname{mediumruleeurobigslant}takes two arguments: the first, the 
-% length \comarg{lift}, raises the cross-stroke rules by the specified 
-% amount from their default position half way up the `C'; and the 
-% second, the number \comarg{slant corr}, is interpreted as the 
-% percentage by which the specified slant of the current fount is 
-% multiplied before calculating the horizontal position of the 
-% cross-strokes. See the explanation of \comname{EFruleeuro} in 
-% section~\vref{sec:howitworks:EFruleeuro} for a fuller description of 
-% these parameters with examples.
-% 
-% \subsubsection[\comname{lightruleeuronorm}]
-% {\comname{lightruleeuronorm}\comarg{lift}\comarg{slant corr}}
-% \label{sec:howitworks:lightruleeuronorm}
-% 
-% This command behaves the same as \comname{mediumruleeuronorm} (see 
-% section~\vref{sec:howitworks:mediumruleeuronorm}), but uses lighter 
-% rules meant to match a fount family like Computer Modern Roman.
-% 
-% \subsubsection[\comname{lightruleeuronoslant}]
-% {\comname{lightruleeuronoslant}\comarg{lift}\comarg{slant corr}}
-% \label{sec:howitworks:lightruleeuronoslant}
-% 
-% This command behaves the same as \comname{mediumruleeuronoslant} (see 
-% section~\vref{sec:howitworks:mediumruleeuronoslant}), but uses lighter rules 
-% meant to match a fount family like Computer Modern Roman.
-% 
-% \subsubsection[\comname{lightruleeurobigslant}]
-% {\comname{lightruleeurobigslant}\comarg{lift}\comarg{slant corr}}
-% \label{sec:howitworks:lightruleeurobigslant}
-% 
-% This command behaves the same as \comname{mediumruleeurobigslant} (see 
-% section~\vref{sec:howitworks:mediumruleeurobigslant}), but uses 
-% lighter rules meant to match a fount family like Computer Modern 
-% Roman.
-% 
-% \subsubsection[\comname{heavyruleeuronorm}]
-% {\comname{heavyruleeuronorm}\comarg{lift}\comarg{slant corr}}
-% \label{sec:howitworks:heavyruleeuronorm}
-% 
-% This command behaves the same as \comname{mediumruleeuronorm} (see 
-% section~\vref{sec:howitworks:mediumruleeuronorm}), but uses heavier 
-% rules that aren't likely to match anything but a few display founts.
-% 
-% \subsubsection[\comname{heavyruleeuronoslant}]
-% {\comname{heavyruleeuronoslant}\comarg{lift}\comarg{slant corr}}
-% \label{sec:howitworks:heavyruleeuronoslant}
-% 
-% This command behaves the same as \comname{mediumruleeuronoslant} (see 
-% section~\vref{sec:howitworks:mediumruleeuronoslant}), but uses heavier 
-% rules that aren't likely to match anything but a few display founts.
-% 
-% \subsubsection[\comname{heavyruleeurobigslant}]
-% {\comname{heavyruleeurobigslant}\comarg{lift}\comarg{slant corr}}
-% \label{sec:howitworks:heavyruleeurobigslant}
-% 
-% This command behaves the same as \comname{mediumruleeurobigslant} (see 
-% section~\vref{sec:howitworks:mediumruleeurobigslant}), but uses 
-% heavier rules that aren't likely to match anything but a few display 
-% founts.
-% 
-% \subsection{Other supporting commands}
-% 
-% \subsubsection{\comname{showfontfamily}}
-% \label{sec:howitworks:showfontfamily}
-% 
-% This command displays the current fount family name on the console, 
-% and also notes the same information in the log file.  It's meant to 
-% be used if you're configuring \packname{eurofont}, but aren't sure 
-% what a particular fount family name is.
-% 
-% If you don't know what a fount family name is in \LaTeX, have a look 
-% at section~\vref{sec:fountfamilies}.
-% 
-% \subsubsection[\comname{SelectOnWeight}]
-% {\comname{SelectOnWeight}
-% \comarg{light}\comarg{medium}\comarg{bold}\comarg{ultrabold}}
-% \label{sec:howitworks:selectonweight}
-% 
-% This command takes four arguments: the first is executed if the 
-% current fount series is listed in \comname{lightserieslist}; the 
-% second if the current fount series is in the 
-% \comname{mediumserieslist}; the third if it's in the 
-% \comname{boldserieslist}; and the fourth if it's in the 
-% \comname{ultraboldserieslist}. If the current fount series isn't 
-% listed in any of these lists, the second argument (used for medium 
-% weight founts) is executed.
-% 
-% A typical use of \comname{SelectOnWeight} is this:
-%\begin{verbatim}
-% \newcommand{\mediumruleeuronorm}[2]{%
-% \SelectOnWeight%
-% {\EFruleeuro{110}{80}{72}{0.04ex}{0.27ex}{#1}{#2}}% light
-% {\EFruleeuro{110}{80}{72}{0.07ex}{0.27ex}{#1}{#2}}% medium
-% {\EFruleeuro{110}{80}{72}{0.14ex}{0.27ex}{#1}{#2}}% bold
-% {\EFruleeuro{110}{80}{72}{0.18ex}{0.27ex}{#1}{#2}}% ultra bold
-% }
-%\end{verbatim}
-% This defines the \comname{mediumruleeuro} command so that it'll print 
-% one of four different faked euro symbols, depending on the weight of the 
-% current fount: lighter weight founts get a euro symbol faked with lighter 
-% rules; the heavier the fount, the heavier the rules.  If the fount 
-% series isn't in any of the lists, you get the rules used for the medium 
-% weight series.
-% 
-% Section~\vref{sec:config} shows what's in the four different 
-% \comname{EF...serieslist} commands by default.
-% 
-% \subsubsection[\comname{EFaddtolist}]
-% {\comname{EFaddtolist}\comarg{list name}\comarg{items to add}}
-% \label{sec:howitworks:EFaddtolist}
-% 
-% This command takes two arguments: the first argument is the name of a 
-% list (which must have already been defined as a \TeX\ command), and 
-% the second argument is a comma delimited list of items to add to the 
-% list.  For example:
-%\begin{verbatim}
-%    \EFaddtolist{\sanslist}{pag,phv,psy,pzd}
-%\end{verbatim}
-% adds four items to the list called \comname{sanslist}. The list ends 
-% up containing the given items with a special delimiter to make it 
-% easier to examine the list using \TeX\ code. A check is made to ensure 
-% that each item is unique: if you tried to put (say) \lfntname{ptm} 
-% (Adobe Times) onto the list twice, you'd only end up with one instance 
-% of \lfntname{ptm} in the list. No warnings are made when this happens.
-% 
-% \subsubsection[\comname{EFiftexteuroexists}]
-% {\comname{EFiftexteuroexists}\comarg{if true}\comarg{if false}}
-% \label{sec:howitworks:EFiftexteuroexists}
-% 
-% This command takes two arguments.  It's used by \comname{maketexteuro} 
-% and \comname{cmeuro} like this:
-%\begin{verbatim}
-%    \EFiftexteuroexists{\texteuro}{\makefakeeuro}}
-%\end{verbatim}
-% What happens is that three tests are made: if the current fount family 
-% is not listed in the \comname{faketexteurolist}, the 
-% \comname{texteuro} command exists, and a TS1 encoded \filename{fd} file 
-% exists for the current fount family, then the first argument is 
-% executed (\comname{texteuro} in this example). If any of these tests 
-% fails, then the second argument (\comname{makefakeeuro} in this 
-% example) is executed.
-% 
-% The idea is that if there's a good chance that the \comname{texteuro} 
-% command will print something useful, then the first argument is 
-% executed; the second argument is executed otherwise.
-% 
-% The \comname{texteuro} command is defined by the standard 
-% \LaTeX\ \packname{textcomp} package which \packname{eurofont} tries to 
-% load by default.  The TS1 encoded \filename{fd} file searched for is 
-% \filename{ts1<fam>.fd}, where |<fam>| is the name of the current fount 
-% family.
-% \subsubsection[\comname{EF@pmb}]{\comname{EF@pmb}\comarg{text}}
-% \label{sec:howitworks:EFpmb}
-% This command, not meant to be used in documents, is one of the two 
-% commands the \packname{eurofont} package uses to print faked bold 
-% characters. What it does is print six copies of its argument, each 
-% copy offset from the others by a small amount in a hexagonal 
-% arrangement. The other command to do this job, \comname{EF@pmsb}, is 
-% identical except that it uses a slightly smaller vertical offset to 
-% produce better results with the Marvosym euro symbols.
-% 
-% This fakery is no substitute for a real bold symbol, but it's much 
-% better than the `poor man's bold' used in the TeXbook and the standard 
-% \LaTeX\ \packname{bm} package. The \packname{eurofont} package's 
-% \comname{EF@pmb} command produces tolerable results over the full 
-% range I've tested it: sizes from 5\,pt to 90\,pt; whereas the 
-% alternative three copy poor man's bold doesn't work at all well at 
-% large sizes. Thanks are due to Donald Arseneau for suggesting a six 
-% copy method.
-% 
-% If you're interested, the actual code can be found in 
-% section~\vref{sec:code:EFpmb}.
-% 
-% \StopEventually{}
-% 
-%\iffalse
-%
-% 1999/01/30 v1.1.3 Made \EFeuro (and hence \euro) robust.  Added note 
-%      about dvips v5.83 being able to partially download Adobe's 
-%      eurofonts correctly.  Changed backslash printing in \comname.
-% 1999/01/18 v1.1.2 Corrected a trivial literal error.  Unreleased.
-% 1998/11/14 v1.1.1 Corrected \ttrb command.
-% 1998/11/10 v1.1 Congratulations to "Walter Schmidt" <wschmi@ibm.net> 
-%      for reporting the first bug *and* telling me how to fix it: say 
-%      Marvosym not marvosym in dvips map file entries.  Done this, 
-%      and made some very minor documentation mods.
-% 1998/11/03 v1.0 <gulp>  This is it...  Minor doc changes, commented 
-%      out some typeouts, and off we go (maybe).
-% 1998/11/03 v0.32beta more documentation changes.  Sorted out some of 
-%      the readmes.
-% 1998/10/31 v0.31beta Spooky, eh?  Changed the \fake...euro commands 
-%      to have two option arguments (thanks to Heiko Oberdiek 
-%      <oberdiek@ruf.uni-freiburg.de> for the method).  Documentation 
-%      mods to match the code mods.  Clobbered some extra spaces that 
-%      had crept in somehow
-% 1998/10/30 v0.30beta Some documentation changes again - dealing with 
-%      slantfudge.  The washing machine has changed colour.
-% 1998/10/29 v0.29beta I've got a (silver) washing machine, and I'm 
-%      still feeling mean.  Changed \EFruleeuro to include 
-%      slantfudge.  
-% 1998/10/28 v0.28beta More documentation changes.  Fixed 
-%      \makeusereuro bug.  Added \EF@pmsb command for Marvosym euro 
-%      symbols.  Added \f@family etc to \EFeuro debugrep.
-% 1998/10/22 v0.27beta More documentation changes.  Getting there...  
-%      Modified \showfontfamily message.  Added \comarg and \comoptarg; 
-%      modified \comname.
-% 1998/10/21 v0.26beta More documentation changes; added note to 
-%      dvidrive.txt about dvips fix. Does anybody want to buy a 
-%      Starfighter?
-% 1998/10/19 v0.25beta Added a documentation note about LaTeX 
-%      versions - why did it take me so long to spot the need for 
-%      this?  
-% 1998/10/17 v0.24beta Added \EF@fakeeurobase to replace literal `C' 
-%      in fake euro code.  \EFeuro now \providecommanded.  Brought 
-%      config file replacement in eurofont.sty into line with current 
-%      eurofont.cfg; did something similar with driver section.  
-%      Dealt with overfull \hboxes one way or another, and documented
-%      the overfullness and cheating in the code section.
-% 1998/10/16 v0.23beta More documentation mods; fiddled with pmb 
-%      code; fiddled with heavyruleeuros; fiddled with normruleeuro 
-%      slant
-% 1998/10/15 v0.22beta Did a spelling check :-)  More documentation 
-%      changes.
-% 1998/10/14 v0.21beta More documentation changes.
-% 1998/10/13 v0.20beta More documentation.  The end is in sight.
-% 1998/10/12 v0.19beta More documentation.  Is there never going to be 
-%      an end to all this?  Added a test for china2e.sty to the 
-%      \chinaeeuro command.
-% 1998/10/06 v0.18beta More documentation.  Tidied up some redundant 
-%     comments and code.  Improved bold faking.  Swapped some \defs 
-%     for \providecommands.  Swapped debug reports around in 
-%     \SelectOnWeight
-% 1998/10/04 v0.17beta Yet more bloody documentation.  Added 
-%     fixtieaccent and nofixtieaccent options.
-% 1998/10/03 v0.16beta More documentation.  Modified \EFruleeuro and 
-%     \EF@crosstrokes: they both now take C depth into account.
-% 1998/10/01 v0.15beta Yet more documentation; \EF@crosstrokes now 
-%     staggers the rules if the fount slants.  My head hurts.  Why is 
-%     arithmetic in TeX such a pain, Dr Knuth?
-% 1998/09/30 v0.14beta More documentation; added psy and pzd to 
-%     seriflist
-% 1998/09/29 v0.13beta More documentation; replaced cmr/ss/tteuro 
-%     lists with single cmeuro list.
-% 1998/09/28 v0.12beta changed \notexteuro to \faketexteuro; more 
-%     documentation; got rid of \let\ESeuro at end; made textcomp 
-%     loading optional; re-named \rightappenditem->\EF@rightappenditem.
-% 1998/09/24 v0.11beta corrected \makesansesuro typo; added 
-%     optargs to \fake...euro commands; modified ruleeuro commands.  
-%     My brain hurts.
-% 1998/09/24 v0.10beta Added \typeouts announcing beta status
-% 1998/09/23 v0.9beta Changed values for ultrabold fakemedium and 
-%     fakeheavy, and added \nobreaks to \euros commands
-% 1998/09/22 v0.8beta Played about with faking code some more: added 
-%     heavy stuff, and stuff for variant rules in fake euros 
-%     controlled by options.  Removed the odd bug.  Added debugreport 
-%     option and code.  Changed behaviour of eurosym option: almost 
-%     all \makeeuro commands are now affected.
-% 1998/09/17 v0.7beta Changed docs; made more \make... commands;
-% 1998/09/12 v0.6beta Changed code docs; made \@ruleeuro->\EFruleeuro; 
-%     added stuff for China2e euro; dropped \EUR and made \euros instead
-% 1998/09/10 v0.5beta Added \notexteurolist and modified \texteuro 
-%     stuff: new test.  Modifed \EFruleeuro to have different length 
-%     cross-strokes.
-% 1998/09/09 v0.4beta Added eurosym stuff; modified faking stuff 
-%     (added four different weight lists, added support for 
-%     \<fam>fakeeuro, and changed other bits too but my brain hurts 
-%     now); added support for <fam>euro.  Changed \cmreuro (etc) to 
-%     \makecmreuro.  Added some \AtBeginDocument stuff so \euro is 
-%     always eurofont's \euro when eurosym is loaded; \EFeuro is 
-%     defined here, and \let\euro\EFeuro \AtBeginDocument does the 
-%     job.  eurosym's \euro is (also) saved if needed: 
-%     \let\ESeuro\euro. 
-% 1998/09/07 v0.3beta Added cfg file, eurosym options, and some more docs.
-% 1998/09/07 v0.2beta First attempt to keep track of changes; added ui 
-%     stuff to marvosym fd bits and farmed the whole lot out to an fd 
-%     file.  Improved \EF@pmb a bit.  Added the start of the 
-%     documentation and doc/docstrip-isation. Corrected an incredibly 
-%     stupid fd file mistake. Changed some \defs to \providecommands in 
-%     anticipation of the cfg file.
-% 1998/08/something-1998/09/04 v0.1beta And so it grew...
-% 
-%\fi
-%
-% \section{The code itself}
-% 
-% To the interested reader: the code below grew rather than being 
-% designed and constructed according to a plan. This is reflected in the 
-% curious structure and eccentric comments; the comments were written 
-% for the chap who wrote the code, rather than anyone else. There's a 
-% fair bit of redundant code left (commented out) and quite a lot of 
-% debugging reports and development notes left in -- these are me 
-% talking to myself, so don't be worried if you see something 
-% inexplicable.
-%
-% One problem with the documented code is that the visual formatting I 
-% used means that quite a lot of lines are longer than 72 characters, so 
-% they won't fit within the normal width of the text. There are 
-% therefore rather a lot of overfull \comname{hboxes} below. I can't see 
-% any easy way round this, so I have cheated and set \comname{hfuzz} to 
-% a large value to suppress the warnings.
-% 
-% Say `hello' to the nice \LaTeX\ program. Who am I, and what do I need? 
-% This package might work with any version of \LaTeXe, but I've 
-% only tested it with the June 1998 release.  For best results, you 
-% need the ec founts andthe  \packname{textcomp} package (part of recent 
-% \LaTeX s).
-%
-%
-%    \begin{macrocode}
-\NeedsTeXFormat{LaTeX2e}[1998/06/01]
-\ProvidesPackage{eurofont}[1999/01/30 v1.1.3 A package for using euro 
-symbols]
-%    \end{macrocode}
-%
-% Get all these defined before loading the config file which might 
-% want to use them.
-%
-%    \begin{macrocode}
-\def\userlist{}
-\def\texteurolist{}
-\def\chinaelist{}
-\def\cmlist{}
-\def\seriflist{}
-\def\sanslist{}
-\def\monolist{}
-\def\fakemediumlist{}
-\def\fakelightlist{}
-\def\fakeheavylist{}
-\def\faketexteurolist{}
-% begin with list of what's light, medium, bold, and ultra bold
-\def\EFlightserieslist{}
-\def\EFmediumserieslist{}
-\def\EFboldserieslist{}
-\def\EFultraboldserieslist{}
-%    \end{macrocode}
-%\begin{macro}{\ifEF@debugreport}
-%\begin{macro}{\EF@debugrep}
-%
-%Flag and command to allow option switching of debugging reports
-%
-%    \begin{macrocode}
-\newif\ifEF@debugreport
-\EF@debugreportfalse% Debugging reports off by default
-\def\EF@debugrep#1{\ifEF@debugreport\typeout{eurofont: #1}\fi}
-%    \end{macrocode}
-%\end{macro}
-%\end{macro}
-%
-% \subsection{List handling code}
-% Needed by the config file etc., which is why it's here.
-%\begin{verbatim}
-% \EFaddtolist{\listname}{comma delimited list of items to add}
-% \EF@checkiflisted{item}{\listname}
-%   this sets \ifEF@listed to true or false
-%\end{verbatim}
-%
-% Code from Stefan Ulrich |<ulrich@cis.uni-muenchen.de>|:
-%
-%\begin{macro}{\EF@checkiflisted}
-%    \begin{macrocode}
-\newif\ifEF@listed
-%
-\def\EF@checkiflisted#1#2{% check if element #1 is in list #2
-\EF@listedfalse%
-\edef\thiselem{#1}% changed to edef from def RJMM 1/9/98
-\let\@@elt\@elt% Save \@elt (in case this command is executed 
-%                  somewhere strange)
-\def\@elt##1{\def\testelem{##1}%
-\ifx\thiselem\testelem\EF@listedtrue\fi}%
-#2\let\@elt\@@elt}% execute list and restore \@elt
-%    \end{macrocode}
-%\end{macro}
-%
-%\begin{macro}{\EFaddtolist}
-%    \begin{macrocode}
-\newcommand{\EFaddtolist}[2]{% #1 = list name;
-%                            #2 = comma-delimited list of items to add
-% \typeout{elements to add: #2}% debugging code; retain
-%   \expandafter%%% this seems redundant
-\EF@addtolist#2,:#1\end}
-%    \end{macrocode}
-%\end{macro}
-%
-%
-%\begin{macro}{\EF@addtolist}
-%    \begin{macrocode}
-\def\EF@addtolist#1,#2:#3\end{% #3 is the list now
-\def\@tempcmda{#2}%
-\ifx\@tempcmda\@empty%
-   \EF@debugrep{Last elem: #1}\relax% if #2 is empty, do this.
-    \EF@addMember{#1}{#3}%            if #2 is empty, do this
-    \else
-     \EF@debugrep{elem: #1}\relax% if #2 is not empty, do this
-      \EF@addMember{#1}{#3}%       if #2 is not empty, do this
-%     \expandafter%%% this seems redundant
-      \EF@addtolist#2:#3\end\fi}%  if #2 is not empty, do this
-%    \end{macrocode}
-%\end{macro}
-%
-%   
-%\begin{macro}{\EF@addMember}
-%    \begin{macrocode}
-\newcommand{\EF@addMember}[2]{%
-    %%% add #1 only if it isn't yet in the list
-    %%% it surely would be more efficient without the check...
-    {\EF@checkiflisted{#1}{#2}\relax% to suppress space
-    \ifEF@listed
-    \EF@debugrep{#1 already in the list}\relax%
-    \else
-    \EF@debugrep{adding #1 to \string #2}\relax%
-    \EF@rightappenditem{#1}{#2}\fi}}
-%    \end{macrocode}
-%\end{macro}
-%
-%\begin{macro}{\EF@rightappenditem}
-%    \begin{macrocode}
-\newtoks\EF@tokb% token list register for temp use
-\newcommand{\EF@rightappenditem}[2]%
-{\@temptokena={\@elt{#1}}\EF@tokb=\expandafter{#2}%
-\xdef#2{\the\EF@tokb\the\@temptokena}}% change the list globally
-%    \end{macrocode}
-%\end{macro}
-%
-% End Stefan's bit
-%
-% \subsection{Options}
-% 
-% Some options: select between Adobe's Eurofonts (typographically 
-% better) or the Marvosym fount for |\serifeuro|, |\sanseuro|, and |\monoeuro|.
-%
-%    \begin{macrocode}
-\newif\ifEF@marvosym\EF@marvosymfalse% Adobe Eurofonts by default
-\newif\ifEF@eurosym\EF@eurosymfalse%   Don't use eurosym by default
-\newif\ifEF@textcomp\EF@textcomptrue% Load the textcomp package if 
-%                                     possible (by default)
-\newif\ifEF@fixtieaccent\EF@fixtieaccentfalse% Don't re-define tie 
-%                                     accent by default
-%
-\DeclareOption{marvosym}      {\EF@marvosymtrue}
-\DeclareOption{adobeeurofonts}{\EF@marvosymfalse}
-%
-\DeclareOption{eurosym}  {\EF@eurosymtrue}
-\DeclareOption{noeurosym}{\EF@eurosymfalse}
-%
-\DeclareOption{debugreport}{\EF@debugreporttrue}
-\DeclareOption{nodebugreport}{\EF@debugreportfalse}
-%
-\DeclareOption{notextcomp}{\EF@textcompfalse}
-\DeclareOption{textcomp}{\EF@textcomptrue}
-%
-\DeclareOption{fixtieaccent}{\EF@fixtieaccenttrue}
-\DeclareOption{nofixtieaccent}{\EF@fixtieaccentfalse}
-%    \end{macrocode}
-%
-%\begin{macro}{\fakelighteuro}
-%\begin{macro}{\fakemediumeuro}
-%\begin{macro}{\fakeheavyeuro}
-%
-% These commands were defined in the options: they're used by 
-% \comname{makefake\-mediumeuro}, \comname{makefakelighteuro}, and 
-% \comname{makefakeheavyeuro} commands later on.
-%
-% They all take two optional arguments:
-%\begin{verbatim}
-% \fake...euro[lift][slant correction factor%]
-%\end{verbatim}
-% The first argument is a normal dimension; the second is a 
-% percentage.  Default values are 0\,pt and 100 respectively.  The 
-% lift is the amount by which the cross-strokes are raised above the 
-% nominal vertical centre line of the C; the slant correction factor is 
-% the factor by which the nominal slant of an italic or oblique C is 
-% multiplied by before working out where to put the cross-strokes.  
-% Some founts have metrics that disagree with reality quite wildly in 
-% terms of the specified italic angle. If the cross-strokes are too 
-% far to the right in the case of slanted versions of a fake euro, this 
-% second optional argument should be set to something less than 100 (50 
-% or 25 are good values to try to begin with); if the cross-strokes are 
-% too far to the left, this second optional argument should be set to 
-% something more than 100 to begin with (200 is a good value to try to 
-% begin with).
-%{\hfuzz=10.0376pt
-%    \begin{macrocode}
-\newcommand*{\fakelighteuro}[1][0ex]{\def\EF@tmprlift{#1}\@fakelighteuro}
-\newcommand*{\fakemediumeuro}[1][0ex]{\def\EF@tmprlift{#1}\@fakemediumeuro}
-\newcommand*{\fakeheavyeuro}[1][0ex]{\def\EF@tmprlift{#1}\@fakeheavyeuro}
-%    \end{macrocode}
-%}
-%\end{macro}
-%\end{macro}
-%\end{macro}
-%
-%
-%\begin{macro}{\@fakelighteuro}
-%\begin{macro}{\@fakemediumeuro}
-%\begin{macro}{\@fakeheavyeuro}
-% These commands are the ones that change depending on which sort 
-% of slant you want on the rules; it's done like this so you can 
-% effectively have two optional arguments for the \comname{fake...euro} 
-% commands, which is awkward to arrange using \comname{newcommand}. 
-% These commands are meant to be called only from the three 
-% \comname{fake...euro} commands above.
-%    \begin{macrocode}
-\DeclareOption{noslantfakeeuro} {%
-    \def\EF@fakeslant{0}% in case anyone's interested
-    \newcommand*{\@fakemediumeuro}[1][100]
-                {\mediumruleeuronoslant{\EF@tmprlift}{#1}}
-    \newcommand*{\@fakelighteuro}[1][100]
-                {\lightruleeuronoslant{\EF@tmprlift}{#1}}
-    \newcommand*{\@fakeheavyeuro}[1][100]
-                {\heavyruleeuronoslant{\EF@tmprlift}{#1}}}
-\DeclareOption{normalslantfakeeuro} {%
-    \def\EF@fakeslant{1}% in case anyone's interested
-    \newcommand*{\@fakemediumeuro}[1][100]
-                {\mediumruleeuronorm{\EF@tmprlift}{#1}}
-    \newcommand*{\@fakelighteuro}[1][100]
-                {\lightruleeuronorm{\EF@tmprlift}{#1}}
-    \newcommand*{\@fakeheavyeuro}[1][100]
-                {\heavyruleeuronorm{\EF@tmprlift}{#1}}}
-\DeclareOption{bigslantfakeeuro} {%
-    \def\EF@fakeslant{2}% in case anyone's interested
-    \newcommand*{\@fakemediumeuro}[1][100]
-                {\mediumruleeurobigslant{\EF@tmprlift}{#1}}
-    \newcommand*{\@fakelighteuro}[1][100]
-                {\lightruleeurobigslant{\EF@tmprlift}{#1}}
-    \newcommand*{\@fakeheavyeuro}[1][100]
-                {\heavyruleeurobigslant{\EF@tmprlift}{#1}}}
-%    \end{macrocode}
-%\end{macro}
-%\end{macro}
-%\end{macro}
-%
-% The |\euros| command was more-or-less stolen from eurosym.sty:
-% The Euro Symbol Package for \LaTeX\ by
-% Henrik Theiling |<theiling@coli.uni-sb.de>|,
-%\begin{verbatim}
-% http://www.coli.uni-sb.de/~theiling
-% \ProvidesPackage{eurosymbol}
-%     [1998/08/06 v1.1 European currency symbol ``Euro'']
-%\end{verbatim}
-% {\hfuzz=19.48749pt
-%    \begin{macrocode}
-\DeclareOption{left}{\PassOptionsToPackage{left}{eurosym}%
-\DeclareRobustCommand{\euros}[1]{\euro\nobreak\,#1}}
-\DeclareOption{right}{\PassOptionsToPackage{right}{eurosym}%
-\DeclareRobustCommand{\euros}[1]{#1\nobreak\,\euro}}
-\DeclareOption{official}{\PassOptionsToPackage{official}{eurosym}}
-\DeclareOption{gen}{\PassOptionsToPackage{gen}{eurosym}}
-\DeclareOption{gennarrow}{\PassOptionsToPackage{gennarrow}{eurosym}}
-\DeclareOption{genwide}{\PassOptionsToPackage{genwide}{eurosym}}
-%
-\ExecuteOptions{adobeeurofonts}% Use Adobe's Eurofonts by default
-\ExecuteOptions{noeurosym}%      Don't use eurosym by default
-\ExecuteOptions{left}%           Euro symbol on left by default
-\ExecuteOptions{normalslantfakeeuro}% Fake euros with slight slant by default
-\ExecuteOptions{nodebugreport}%  No debugging reports by default
-\ExecuteOptions{textcomp}%  Load the textcomp package by default
-\ExecuteOptions{nofixtieaccent}%  Don't re-define the tie accent by 
-%                                 default
-%    \end{macrocode}
-%}
-% 
-%    \begin{macrocode}
-\InputIfFileExists{eurofont.cfg}{}%
-{\PackageWarningNoLine{eurofont}%
-{I can't find the eurofont.cfg configuration file.\MessageBreak
-Perhaps something is wrong with this installation?\MessageBreak
-The \protect\euro\space command will work with default settings}%
-\EFaddtolist{\userlist}{}
-\EFaddtolist{\texteurolist}{}
-\EFaddtolist{\chinaelist}{}
-\EFaddtolist{\cmlist}{cmr,cmss,cmtt}
-\EFaddtolist{\seriflist}{pbk,pnc,ppl,ptm,put}
-\EFaddtolist{\sanslist}{pag,phv,psy,pzd}
-\EFaddtolist{\monolist}{pcr}
-\EFaddtolist{\fakemediumlist}{pzc}
-\EFaddtolist{\fakelightlist}{}
-\EFaddtolist{\fakeheavylist}{}
-%
-\EFaddtolist{\faketexteurolist}{}
-%    \end{macrocode}
-% The following lists are used to decide which thickness line should be used 
-% for producing faked euro symbols.  demibold and semibold are in the 
-% medium list because I reckon it's better to have a line that's a 
-% touch too light than too heavy.
-% {\hfuzz=10.0376pt
-%    \begin{macrocode}
-\EFaddtolist{\EFlightserieslist}{ul,el,l,ulc,elc,lc,ulx,elx,lx}
-\EFaddtolist{\EFmediumserieslist}{m,mb,db,sb,mc,mbc,dbc,sbc,mx,mbx,dbx,sbx}
-\EFaddtolist{\EFboldserieslist}{b,bx,bc}
-\EFaddtolist{\EFultraboldserieslist}{eb,ub,ebc,ubc,ebx,ubx}%
-%
-% And two non-standard series:
-%
-\EFaddtolist{\EFultraboldserieslist}{xb,ebd}
-}
-%    \end{macrocode}
-%}
-%
-% Note: the stuff above should include more-or-less everything in the 
-% default config file.
-%
-%
-%    \begin{macrocode}
-\ProcessOptions
-%    \end{macrocode}
-%
-% If requested (as it is by default), load textcomp.sty if it exists; 
-% this conditional code and subsequent checking for 
-% \filename{textcomp.sty} should allow eurofont.sty to work with old or 
-% OT1-only \LaTeX s.
-%
-%{\hfuzz=0.5877pt
-%    \begin{macrocode}
-\ifEF@textcomp\IfFileExists{textcomp.sty}{\RequirePackage{textcomp}}{}\fi
-%    \end{macrocode}
-%} 
-%
-% If the textcomp package is going to be loaded, it'll be loaded by 
-% now, so now is the time to re-define the tie accent (if this has been 
-% asked for):
-%    \begin{macrocode}
-\ifEF@fixtieaccent \DeclareTextAccentDefault{\t}{OML}\fi
-%    \end{macrocode}
-%
-%    \begin{macrocode}
-\ifEF@eurosym%
-%    \end{macrocode}
-% even if eurosym can't be loaded, ensure that some sort of euro is 
-% printed:
-%    \begin{macrocode}
-\def\euro{\makefakeeuro}
-%    \end{macrocode}
-% Load eurosym if asked and if possible
-%    \begin{macrocode}
-\IfFileExists{eurosym.sty}{\RequirePackage{eurosym}}{%
-\PackageError{eurofont}{I can't find the eurosym package}%
-{You've used the eurosym option; this requires the eurosym package 
-which doesn't appear to be installed}}%
-%    \end{macrocode}
-% Save eurosym's |\euro| as |\ESeuro|; if eurosym couldn't be 
-% loaded, |\euro| is still defined as |\makefakeeuro| (see above), so a 
-% sort of |\euro| symbol will be printed
-%    \begin{macrocode}
-\let\ESeuro\euro
-\fi
-%    \end{macrocode}
-% 
-% \subsection{A spare command or more?}
-%
-% \begin{macro}{\showfontfamily}
-%    \begin{macrocode}
-\newcommand{\showfontfamily}{
-\typeout{**********************************}
-\typeout{* \protect\showfontfamily:
-      \space\space\space\space\space\space
-      \space\space\space\space\space\space
-      \space\space\space*}
-\typeout{*\space\space\space\space\space\space
-          \space\space\space\space\space\space
-      \space\space\space\space\space\space
-      \space\space\space\space\space\space
-      \space\space\space\space\space\space
-      \space\space\space*}
-\typeout{* The current font family is: \f@family\space *}
-\typeout{*\space\space\space\space\space\space
-          \space\space\space\space\space\space
-      \space\space\space\space\space\space
-      \space\space\space\space\space\space
-      \space\space\space\space\space\space
-      \space\space\space*}
-\typeout{***********************************}
-}
-%    \end{macrocode}
-% \end{macro}
-%
-%
-% \subsection{Code to fudge a euro if needed}
-% 
-% The author commands to generate faked euro symbols now select one of four 
-% weights of cross-stroke to match light, medium, bold, and ultrabold. 
-% This should do.
-%
-%\begin{macro}{\EF@crossstrokes}
-%
-% Arguments as noted; this is the command that draws the horizontal 
-% strokes for a fake euro symbol.
-% \hfuzz=14.76254pt
-%    \begin{macrocode}
-\def\EF@crossstrokes#1#2#3#4#5#6#7#8#9{%
-%                   #1 = width of C
-%                   #2 = height of C
-%                   #3 = depth of C
-%                   #4 = back shift as percentage of #1
-%                   #5 = strokelen as percentage of #1
-%                   #6 = strokelen of bottom rule as percentage of #1
-%                   #7 = thickness of cross-strokes
-%                   #8 = centre line spacing of cross-strokes
-%                   #9 = extra rule lift
-% Need to lift cross strokes by 1/2 (height C - height cross-strokes)
-%
-% N.B. slanted founts are an interesting thingy.
-% The metrics often lie about the slant, so \EF@slantcorr is a 
-% percentage to multiply the slant/point figure from the tfm file by.  
-% Start out by ensuring that it exists:
-\@ifundefined{EF@slantcorr}{\def\EF@slantcorr{100}}{}%
-% \fontdimen1 is slant per point (in points).
-\@tempdima=#8%
-% \typeout{rule spacing = \the\@tempdima}%
-\@tempdima=\fontdimen1\font%
-% \typeout{slant per point = \the\@tempdima}%
-% now apply fudge factor:
-\@tempdima=0.1\@tempdima%
-\@tempdima=\EF@slantcorr\@tempdima%
-\@tempdima=0.1\@tempdima%
-% (the eccentric multiplication is to reduce rounding error and 
-% reduce the risk of the dimen getting too big)
-\edef\@tempcmda{\strip@pt\@tempdima}%
-% \typeout{fudged slant per point/points = \@tempcmda}%
-% \@tempdima=#1%
-\@tempdima=#2% Changed from width #1 to height #2
-\@tempdima=\@tempcmda\@tempdima%
-% \typeout{Width of C = #1}%
-% \typeout{Height of C = #2}%
-% \typeout{slant in points (for C) = \the\@tempdima}%
-\@tempdima=0.5\@tempdima%
-% \typeout{half slant in points (for C) = \the\@tempdima}%
-% % now apply fudge factor:
-% \@tempdima=0.1\@tempdima%
-% \@tempdima=\EF@slantcorr\@tempdima%
-% \@tempdima=0.1\@tempdima%
-% % (the eccentric multiplication is to reduce rounding error and 
-% % reduce the risk of the dimen getting too big)
-\edef\EF@slantC{\the\@tempdima}%
-% \typeout{final half slant in points (for C) = \EF@slantC}%
-%
-% \EF@slantC is now 1/2 the slant of a C;
-% need this for shifting back and forth
-%
-% Now calculate horizontal offset between rules
-% \@tempcmda is still the fudged slant per point/points, so...
-\@tempdimb=#8% centre line spacing of rules
-\@tempdimb=\@tempcmda\@tempdimb%
-\@tempdimb=0.5\@tempdimb%
-\edef\EF@rulehoffset{\the\@tempdimb}%
-%
-% below is the old, mad, and incorrect (?) calc
-%
-% \begin{madness}
-%
-% \@tempdima=#2
-% \@tempdima=100\@tempdima
-% \advance\@tempdima by0.5pt\@settopoint\@tempdima
-% \edef\@tempcmda{\strip@pt\@tempdima}%
-% \@tempdima=100pt%
-% \divide\@tempdima by\@tempcmda%
-% \edef\@tempcmda{\strip@pt\@tempdima}%
-% \@tempdima=#8%
-% \@tempdima=\@tempcmda\@tempdima%
-% \@tempdimb=\EF@slantC%
-% \@tempdimb=2\@tempdimb% since \EF@slantC is actually 1/2 slantC
-% \edef\@tempcmda{\strip@pt\@tempdimb}%
-% \@tempdima=\@tempcmda\@tempdima%
-% \@tempdima=0.5\@tempdima%
-% %
-% \edef\EF@rulehoffset{\the\@tempdima}%
-%
-% \end{madness}
-%
-% \typeout{\protect\EF@rulehoffset\space = \EF@rulehoffset}%
-%
-% \EF@ruleoffset is now 1/2 the horizontal offset between rules;
-% need this for shifting back and forth even more.
-%
-\@tempdima=#1%             \
-\@tempdima=0.01\@tempdima%  \
-\@tempdima=#4\@tempdima%     } move back to add cross-strokes
-\kern-\@tempdima%           /
-\kern\EF@slantC%           /  Slant correction forward for italic
-% lift = (height C - depth C - rule gap - rule thickness)/2  + offset
-% Note that `rule gap' is the distance between the centre lines of 
-% the rules, not the gap between them
-\@tempdima=#2%                      \
-\advance\@tempdima by-#3%            \
-\advance\@tempdima by-#8%             \ calc lift of cross-strokes
-\advance\@tempdima by-#7%             /
-\@tempdima=0.5\@tempdima%            / 
-\advance\@tempdima by#9%            /
-% 0.17ex was 1/2 height c/s; height 0.07ex; spacing 0.2ex
-\@tempdimc=#8%             \ calc cross-stroke spacing
-\advance\@tempdimc by-#7%  /
-\raisebox{\@tempdima}{%            
-\vbox{%                             \
-\@tempdimb=#1%                \      \
-\@tempdimb=0.01\@tempdimb%     } calc width of cross-stroke
-\@tempdimb=#5\@tempdimb%      /        \
-\hbox{\kern\EF@rulehoffset%             \ top rule
-\vbox{\hrule width\@tempdimb height#7}}% \ 
-\nointerlineskip%                         } draw cross-strokes
-\vskip\@tempdimc%                        / (using \@tempdima/b/c from above)
-\@tempdimb=#1%                \         /
-\@tempdimb=0.01\@tempdimb%     } calc width of cross-stroke
-\@tempdimb=#6\@tempdimb%      /       /
-\hbox{\kern-\EF@rulehoffset%         /
-\vbox{\hrule width\@tempdimb height#7}}}}%  bottom rule
-\@tempcnta=#4%                   \
-\advance\@tempcnta by-#5%  (aha!) \
-\@tempdima=#1%                     \
-\@tempdima=0.01\@tempdima%          \ move forward to end of C
-\@tempdima=\@tempcnta\@tempdima%    /
-\kern\@tempdima%                   /
-% shift  by slant amount          /
-\kern-\EF@slantC%                /   slant correction
-}
-%
-%    \end{macrocode}
-%\end{macro}
-%\begin{macro}{\EF@fakeeurobase}
-% This command contains the letter that's used as the base to fake a 
-% euro symbol -- it's used by the \comname{EFruleeuro} command.
-%    \begin{macrocode}
-\providecommand\EF@fakeeurobase{C}
-%    \end{macrocode}
-% \end{macro}
-% 
-%\begin{macro}{\EFruleeuro}
-% The internal command to generate faked euro symbols; meant to be used in 
-% config files and things if the user wants to create new sorts of fake 
-% euro symbols.
-%    \begin{macrocode}
-\def\EFruleeuro#1#2#3#4#5#6#7{{% Confine defs to \EFruleeuro
-%             #1 = percentage of width of C that back shift of 
-%                  rules is; 110 usually
-%             #2 = percentage of width of C that width of 
-%                  top rules is
-%             #3 = percentage of width of C that width of 
-%                  bottom rule is
-%             #4 = rule thickness (dimen)
-%             #5 = rule spacing (dimen)
-%             #6 = extra rule lift (dimen)
-%             #7 = slant fudge factor (percentage); this is used to 
-%                  scale the slant per point dimension from the tfm 
-%                  file; it's often wrong in terms of the C glyph
-\settowidth{\@tempdima}{\EF@fakeeurobase}%
-\settoheight{\@tempdimb}{\EF@fakeeurobase}%
-\settodepth{\@tempdimc}{\EF@fakeeurobase}%
-\edef\EF@Cwidth{\the\@tempdima}%
-\edef\EF@Cheight{\the\@tempdimb}%
-\edef\EF@Cdepth{\the\@tempdimc}%
-\advance\@tempdimb by\@tempdimc%
-% \edef\totalCheight{\the\@tempdimb}%\totalCheight is height+depth of C
-% \typeout{\protect\EF@Cwidth\space = \EF@Cwidth}%
-% \typeout{\protect\EF@Cheight\space = \EF@Cheight}%
-% \typeout{\protect\EF@Cdepth\space = \EF@Cdepth}%
-% First job: deal with slant fudge
-\def\EF@slantcorr{#7}%
-\ifx\EF@slantcorr\@empty\def\EF@slantcorr{100}\fi%
-% Ensure that \EF@slantcorr is 100 (%) if not specified.  This 
-% parameter is used by \EF@crossstrokes
-\def\EF@backshift{#1}% percentage of \EF@Cwidth that back shift is
-\@tempdimb=0.01\@tempdima%          swapped these two lines;
-\@tempdimb=\EF@backshift\@tempdimb% dimen can get too big otherwise
-% \@tempdimb now = length of shift back to add cross-strokes
-% Note that this ignores the italic corrections.  Is this right?
-% (ignoring italic correction seems to be right; but...  The 
-% introduction of the horizontal offset to the rules might not be 
-% right to ignore; it seems suitable in tests, but?  Since the amount 
-% should always be small, I'll ignore it for now - dealing with it is 
-% awkward and the offset *should* help things fit together better.)
-% \@tempdima now = width of C
-% typeset the faked euro
-%
-% Assumption: that the cross-strokes don't extend to the right of the 
-% C (allows the width calculations to be a bit simpler than they 
-% otherwise would be).
-%
-% \@tempdima = width of C; \@tempdimb = \EF@backshift x width of C
-% \typeout{\the\@tempdima\space = width of C}%
-% \typeout{\the\@tempdimb\space = \protect\EF@backshift x width of C}%
-% Following line: make box = largest of (\@tempdima,\@tempdimb)
-\ifdim\@tempdimb>\@tempdima\@tempdima=\@tempdimb\fi%
-\makebox[\@tempdima][r]%
-{\EF@fakeeurobase\EF@crossstrokes{\EF@Cwidth}{\EF@Cheight}{\EF@Cdepth}%
-                                 {\EF@backshift}{#2}{#3}{#4}{#5}{#6}}%
-}}
-%    \end{macrocode}
-%\end{macro}
-%
-%\begin{macro}{\SelectOnWeight}
-%
-%\begin{verbatim}
-% if the current fount series:
-%      is in the  light     list, do #1; else
-% if it's in the  medium    list, do #2; else
-% if it's in the  bold      list, do #3; else
-% if it's in the  ultrabold list, do #4; else
-% do #2
-%\end{verbatim}
-%
-%    \begin{macrocode}
-\def\SelectOnWeight#1#2#3#4{%
-\EF@checkiflisted{\f@series}{\EFlightserieslist}%
-\ifEF@listed\EF@debugrep{SelectOnWeight light}#1%
-\else
-\EF@checkiflisted{\f@series}{\EFmediumserieslist}%
-\ifEF@listed\EF@debugrep{SelectOnWeight medium}#2%
-\else
-\EF@checkiflisted{\f@series}{\EFboldserieslist}%
-\ifEF@listed\EF@debugrep{SelectOnWeight bold}#3%
-\else
-\EF@checkiflisted{\f@series}{\EFultraboldserieslist}%
-\ifEF@listed\EF@debugrep{SelectOnWeight ultrabold}#4%
-\else\EF@debugrep{SelectOnWeight default to medium}%
-#2%
-\fi\fi\fi\fi}
-%    \end{macrocode}
-%\end{macro}
-%
-%\begin{macro}{\mediumruleeuronorm}
-%\begin{macro}{\mediumruleeuronoslant}
-%\begin{macro}{\mediumruleeurobigslant}
-% This is the standard command for faking a euro symbol.  It selects 
-% one of four weights of cross-stroke depending on the current fount 
-% series.
-% 
-% The light and ultra bold weights are fairly arbitrary. \hfuzz=57.28705pt
-%
-%    \begin{macrocode}
-\providecommand*{\mediumruleeuronorm}[2]{\EF@debugrep{medium rule euro norm}%
-\SelectOnWeight%
-{\EFruleeuro{110}{80}{72}{0.04ex}{0.27ex}{#1}{#2}}% light
-{\EFruleeuro{110}{80}{72}{0.07ex}{0.27ex}{#1}{#2}}% medium
-{\EFruleeuro{110}{80}{72}{0.14ex}{0.27ex}{#1}{#2}}% bold
-{\EFruleeuro{110}{80}{72}{0.18ex}{0.27ex}{#1}{#2}}% ultra bold - new numbers
-}
-\providecommand*{\mediumruleeuronoslant}[2]{\EF@debugrep{medium rule euro noslant}%
-\SelectOnWeight%
-{\EFruleeuro{110}{80}{80}{0.04ex}{0.27ex}{#1}{#2}}% light
-{\EFruleeuro{110}{80}{80}{0.07ex}{0.27ex}{#1}{#2}}% medium
-{\EFruleeuro{110}{80}{80}{0.14ex}{0.27ex}{#1}{#2}}% bold
-{\EFruleeuro{110}{80}{80}{0.18ex}{0.27ex}{#1}{#2}}% ultra bold
-}
-\providecommand*{\mediumruleeurobigslant}[2]{\EF@debugrep{medium rule euro bigslant}%
-\SelectOnWeight%
-{\EFruleeuro{110}{80}{60}{0.04ex}{0.27ex}{#1}{#2}}% light
-{\EFruleeuro{110}{80}{60}{0.07ex}{0.27ex}{#1}{#2}}% medium
-{\EFruleeuro{110}{80}{60}{0.14ex}{0.27ex}{#1}{#2}}% bold
-{\EFruleeuro{110}{80}{60}{0.18ex}{0.27ex}{#1}{#2}}% ultra bold
-}
-%    \end{macrocode}
-%\end{macro}
-%\end{macro}
-%\end{macro}
-%\begin{macro}{\lightruleeuronorm}
-%\begin{macro}{\lightruleeuronoslant}
-%\begin{macro}{\lightruleeurobigslant}\hfuzz=47.83716pt
-% A complementary command for faking a euro with lighter cross-strokes; 
-% suitable for founts like Computer Modern Roman.
-%    \begin{macrocode}
-\providecommand*{\lightruleeuronorm}[2]{\EF@debugrep{light rule euro norm}%
-\SelectOnWeight%
-{\EFruleeuro{110}{80}{72}{0.02ex}{0.27ex}{#1}{#2}}% light
-{\EFruleeuro{110}{80}{72}{0.04ex}{0.27ex}{#1}{#2}}% medium
-{\EFruleeuro{110}{80}{72}{0.07ex}{0.27ex}{#1}{#2}}% bold
-{\EFruleeuro{110}{80}{72}{0.14ex}{0.27ex}{#1}{#2}}% ultra bold
-}
-\providecommand*{\lightruleeuronoslant}[2]{\EF@debugrep{light rule euro noslant}%
-\SelectOnWeight%
-{\EFruleeuro{110}{80}{80}{0.02ex}{0.27ex}{#1}{#2}}% light
-{\EFruleeuro{110}{80}{80}{0.04ex}{0.27ex}{#1}{#2}}% medium
-{\EFruleeuro{110}{80}{80}{0.07ex}{0.27ex}{#1}{#2}}% bold
-{\EFruleeuro{110}{80}{80}{0.14ex}{0.27ex}{#1}{#2}}% ultra bold
-}
-\providecommand*{\lightruleeurobigslant}[2]{\EF@debugrep{light rule euro bigslant}%
-\SelectOnWeight%
-{\EFruleeuro{110}{80}{60}{0.02ex}{0.27ex}{#1}{#2}}% light
-{\EFruleeuro{110}{80}{60}{0.04ex}{0.27ex}{#1}{#2}}% medium
-{\EFruleeuro{110}{80}{60}{0.07ex}{0.27ex}{#1}{#2}}% bold
-{\EFruleeuro{110}{80}{60}{0.14ex}{0.27ex}{#1}{#2}}% ultra bold
-}
-%    \end{macrocode}
-%\end{macro}
-%\end{macro}
-%\end{macro}
-%\begin{macro}{\heavyruleeuronorm}
-%\begin{macro}{\heavyruleeuronoslant}
-%\begin{macro}{\heavyruleeurobigslant}
-% A complementary command for faking a euro with heavy cross-strokes; 
-% it seemed inevitable after the other two.  I'm not sure that there's 
-% any particular sense to the bold and ultra bold values in this case.
-% 
-% I'm still not \emph{completely} happy with this, but it's much better 
-% now.\hfuzz=47.83716pt
-%    \begin{macrocode}
-\providecommand*{\heavyruleeuronorm}[2]{\EF@debugrep{heavy rule euro norm}%
-\SelectOnWeight%
-{\EFruleeuro{110}{80}{72}{0.14ex}{0.27ex}{#1}{#2}}% light
-{\EFruleeuro{110}{80}{72}{0.18ex}{0.27ex}{#1}{#2}}% medium
-{\EFruleeuro{110}{80}{72}{0.22ex}{0.30ex}{#1}{#2}}% bold
-{\EFruleeuro{110}{80}{72}{0.26ex}{0.33ex}{#1}{#2}}% ultra bold
-}
-\providecommand*{\heavyruleeuronoslant}[2]{\EF@debugrep{heavy rule euro noslant}%
-\SelectOnWeight%
-{\EFruleeuro{110}{80}{80}{0.14ex}{0.27ex}{#1}{#2}}% light
-{\EFruleeuro{110}{80}{80}{0.18ex}{0.27ex}{#1}{#2}}% medium
-{\EFruleeuro{110}{80}{80}{0.22ex}{0.30ex}{#1}{#2}}% bold
-{\EFruleeuro{110}{80}{80}{0.26ex}{0.33ex}{#1}{#2}}% ultra bold
-}
-\providecommand*{\heavyruleeurobigslant}[2]{\EF@debugrep{heavy rule euro bigslant}%
-\SelectOnWeight%
-{\EFruleeuro{110}{80}{60}{0.14ex}{0.27ex}{#1}{#2}}% light
-{\EFruleeuro{110}{80}{60}{0.18ex}{0.27ex}{#1}{#2}}% medium
-{\EFruleeuro{110}{80}{60}{0.22ex}{0.30ex}{#1}{#2}}% bold
-{\EFruleeuro{110}{80}{60}{0.26ex}{0.33ex}{#1}{#2}}% ultra bold
-}
-%    \end{macrocode}
-%\end{macro}
-%\end{macro}
-%\end{macro}
-%
-%\subsection{Code to use marvosym}
-%
-% Code to use marvosym fount; needs faked italic tfm (and \dvidriver 
-% able to fake an italic)
-%
-%\begin{macro}{\EF@mvs}
-%    \begin{macrocode}
-\def\EF@mvs{\fontencoding{U}\fontfamily{zmvs}\fontseries{m}\selectfont}
-%    \end{macrocode}
-%\end{macro}
-%
-% Note that the |\mbox| is now redundant; leave it in in case 
-% |\EF@pmb| changes again
-%
-%\begin{macro}{\marvosymeuro}
-%    \begin{macrocode}
-\providecommand{\marvosymeuro}[1]{%
-\EF@debugrep{marvosymeuro}%
-\SelectOnWeight%
-{\EF@mvs\char#1}% light
-{\EF@mvs\char#1}% medium
-{\mbox{\EF@pmsb{\EF@mvs\char#1}}}% bold
-{\mbox{\EF@pmsb{\EF@mvs\char#1}}}% ultra bold
-}
-%    \end{macrocode}
-%\end{macro}
-%    
-%\begin{macro}{\marvosymserifeuro}
-%\begin{macro}{\marvosymsanseuro}
-%\begin{macro}{\marvosymmonoeuro}
-%    \begin{macrocode}
-\providecommand
- {\marvosymserifeuro}{\EF@debugrep{marvosymserifeuro}\marvosymeuro{101}}
-\providecommand
- {\marvosymsanseuro}{\EF@debugrep{marvosymsanseuro}\marvosymeuro{99}}
-\providecommand
- {\marvosymmonoeuro}{\EF@debugrep{marvosymmonoeuro}\marvosymeuro{100}}
-%    \end{macrocode}
-%\end{macro}
-%\end{macro}
-%\end{macro}
-%
-% \subsection{Faking a bold character}
-% \label{sec:code:EFpmb}
-%
-% Original comments:
-% |\EF@pmb| fakes bold; modified from the \TeX book
-%
-% I don't pretend to understand it all, but this seems to do the job 
-% better, and ensures that the width taken by the box is the width taken 
-% by the printed glyphs.  This is used by |\marvosymeuro|
-% Original code:
-%\begin{verbatim}
-% \def\EF@pmb#1{\makebox{\setbox\@tempboxa=\hbox{#1}%
-%   \kern0em\copy\@tempboxa\kern-\wd\@tempboxa
-%   \kern.025em\raise.0216em\copy\@tempboxa\kern-\wd\@tempboxa
-%   \kern.025em\box\@tempboxa }}
-%\end{verbatim}
-%
-% This code produces a better faked bold; the idea of using a hexagonal 
-% arrangement was suggested by Donald Arseneau.  You can probably tell 
-% I wrote the |\EF@pmb| macro myself :-)  I might move to an 
-% octagonal arrangement later on.
-%
-% Marvosym complicates matters; a vertical shift of |0.866 x 0.020em| 
-% makes the horizontal strokes collide when you fake a bold Marvosym 
-% euro symbol. The solution is to move away from a regular hexagon and 
-% use a smaller vertical shift.
-%
-% So now there's two commands: \comname{EF@pmb} for normal fake bold, 
-% and \comname{EF@pmsb} (semi bold) for the Marvosym euro symbols.  
-% It's only slightly less heavy than the usual version.
-% 
-%\begin{macro}{\EF@pmbshift}
-%\begin{macro}{\EF@pmb}
-%\begin{macro}{\EF@pmsb}
-%    \begin{macrocode}
-\newlength{\EF@pmbshift}
-%
-\newcommand{\EF@pmsb}[1]{%
-\EF@debugrep{EF@pmsb}%
-\EF@pmbshift=0.020em% as was
-\hbox{%
-\rlap{#1}%
-\kern0.5\EF@pmbshift%
-\raisebox{0.50\EF@pmbshift}[0pt][0pt]{\rlap{#1}}%
-\raisebox{-0.50\EF@pmbshift}[0pt][0pt]{\rlap{#1}}%
-\kern1\EF@pmbshift%
-\raisebox{0.50\EF@pmbshift}[0pt][0pt]{\rlap{#1}}%
-\raisebox{-0.50\EF@pmbshift}[0pt][0pt]{\rlap{#1}}%
-\kern0.5\EF@pmbshift%
-#1}}
-%
-\newcommand{\EF@pmb}[1]{%
-\EF@debugrep{EF@pmb}%
-\EF@pmbshift=0.020em% as was
-\hbox{%
-\rlap{#1}%
-\kern0.5\EF@pmbshift%
-\raisebox{0.866\EF@pmbshift}[0pt][0pt]{\rlap{#1}}%
-\raisebox{-0.866\EF@pmbshift}[0pt][0pt]{\rlap{#1}}%
-\kern1\EF@pmbshift%
-\raisebox{0.866\EF@pmbshift}[0pt][0pt]{\rlap{#1}}%
-\raisebox{-0.866\EF@pmbshift}[0pt][0pt]{\rlap{#1}}%
-\kern0.5\EF@pmbshift%
-#1}}
-%    \end{macrocode}
-%\end{macro}
-%\end{macro}
-%\end{macro}
-% 
-%
-% \subsection{The code to select and print euro symbols}
-%
-%
-% But better yet: add a pair of options: `|adobeeurofont|' or 
-% `|marvosym|'.  The |marvosym| option will set up 
-% |\monoeuro| (etc) to use marvosym glyphs; the |adobeeurofont| option 
-% (default) will set |\monoeuro| (etc) to use adobe glyphs.
-% 
-% Do this, \emph{and} add documentation on fiddling with |\userlist| (etc) 
-% so you can use both
-%
-% |\texteuro| is a problem: this command is here to help.
-%\begin{verbatim}
-% if <fam> is in \faketexteurolist, #2,
-%   else
-%   if \texteuro is defined and TS1<fam>.fd exists #1,
-%     else #2
-%     fi fi
-%\end{verbatim}
-%\begin{macro}{\EFiftexteuroexists}
-%    \begin{macrocode}
-\def\EFiftexteuroexists#1#2{%
-\EF@checkiflisted{\f@family}{\faketexteurolist}%
-\ifEF@listed#2%
-\else
-\ifx\texteuro\@undefined#2% if \texteuro doesn't exist, #2 and finish
-\else%
-\IfFileExists{ts1\f@family.fd}%
-{#1}% if ts1<fam>.fd exists, #1.  Can't usefully test for glyph existing
-{#2}% if ts1<fam>.fd doesn't exist, #2 and finish
-\fi\fi}
-%    \end{macrocode}
-%\end{macro}
-%\begin{macro}{\zpeutteuro}
-%\begin{macro}{\zpeureuro}
-%\begin{macro}{\zpeusseuro}
-% Define these for |\monoeuro| etc., to use.  Note that the command 
-% names are such that if you happen to be in |zpeutt| and say |\euro|, 
-% you'll get |\zpeutteuro| executed straight away.  I don't have to 
-% list these fount families in |\seriflist| etc.
-%    \begin{macrocode}
-\providecommand{\zpeutteuro}{\EF@debugrep{zpeutteuro}%
-{\fontencoding{U}\fontfamily{zpeutt}\selectfont e}}
-\providecommand{\zpeureuro}{\EF@debugrep{zpeureuro}%
-{\fontencoding{U}\fontfamily{zpeur}\selectfont e}}
-\providecommand{\zpeusseuro}{\EF@debugrep{zpeusseuro}%
-{\fontencoding{U}\fontfamily{zpeuss}\selectfont e}}
-%    \end{macrocode}
-%\end{macro}
-%\end{macro}
-%\end{macro}
-%
-% Use either marvosym or Adobe's Eurofonts for serif/sans/mono lists
-%
-% These might have already been defined in the cfg file; don't want 
-% to over-ride those definitions, so |\providecommand| them.
-% 
-% It's not safe to assume that either Adobe's Eurofonts or the Marvosym 
-% fount are in fact installed, but I don't see any easy way of finding 
-% out the truth of the matter. I suspect it's best to leave it up to the 
-% user to get the configuration right. Careful with that documentation, 
-% Eugene.
-%
-%\begin{macro}{\monoeuro}
-%\begin{macro}{\serifeuro}
-%\begin{macro}{\sanseuro}
-%    \begin{macrocode}
-\ifEF@marvosym
-\providecommand{\monoeuro}{\EF@debugrep{monoeuro}{\marvosymmonoeuro}}
-\providecommand{\serifeuro}{\EF@debugrep{serifeuro}{\marvosymserifeuro}}
-\providecommand{\sanseuro}{\EF@debugrep{sanseuro}{\marvosymsanseuro}}
-\else
-\providecommand{\monoeuro}{\EF@debugrep{monoeuro}\zpeutteuro}
-\providecommand{\serifeuro}{\EF@debugrep{serifeuro}\zpeureuro}
-\providecommand{\sanseuro}{\EF@debugrep{sanseuro}\zpeusseuro}
-\fi
-%    \end{macrocode}
-%\end{macro}
-%\end{macro}
-%\end{macro}
-% 
-% Slightly more involved code for \comname{makeusereuro}: make it issue a 
-% warning if it's not user defined.
-%
-%\begin{macro}{\makeusereuro}
-%    \begin{macrocode}
-\providecommand{\makeusereuro}
-               {\EF@debugrep{makeusereuro}\makefakemediumeuro%
-%
-\PackageWarningNoLine{eurofont}{%
-You have tried to use the \protect\makeusereuro\space command 
-to\MessageBreak print a euro symbol, but you have not defined 
-the\MessageBreak \protect\makeusereuro\space command. This has 
-probably happened in\MessageBreak the \protect\euro\space command. I 
-shall print a faked euro symbol\MessageBreak for now}}
-%    \end{macrocode}
-%\end{macro}
-%
-%\begin{macro}{\chinaeeuro}
-% I have some misgivings about faking a bold from this euro symbol; 
-% it's a beautiful glyph which doesn't really deserve this sort of 
-% abuse.
-% 
-% Removed the anomalous parameter from definition of |\chinaeeuro|.  
-% What was I thinking of?
-%
-% And finally\ldots\ Test for the existence of china2e.sty, and assume 
-% that China2e's not been installed if the package file is missing.  I'd 
-% rather test for the existence of the tfm file, but I don't know how: 
-% if you know, I'd appreciate an email explaining how.
-% 
-%    \begin{macrocode}
-\DeclareFontFamily{OT1}{chin}{}
-\DeclareFontShape{OT1}{chin}{m}{n}{<-> china10}{}
-%
-\providecommand{\chinaeeuro}{%
-\IfFileExists{china2e.sty}%
-{\EF@debugrep{chinaeeuro}%
-\SelectOnWeight%
-{{\usefont{OT1}{chin}{m}{n}\char255}}% light
-{{\usefont{OT1}{chin}{m}{n}\char255}}% medium
-{\mbox{\EF@pmb{\usefont{OT1}{chin}{m}{n}\char255}}}% bold
-{\mbox{\EF@pmb{\usefont{OT1}{chin}{m}{n}\char255}}}% ultra bold
-}%
-{\EF@debugrep{chinaeeuro - we have a problem}%
-\PackageWarning{eurofont}{%
-The \protect\euro\space command
-is trying to print a euro symbol\MessageBreak
-from the China2e fount, but I can't find the file\MessageBreak
-china2e.sty.\MessageBreak\MessageBreak
-I'm assuming that you've not got the China2e font\MessageBreak
-installed, so I'm printing a faked euro instead\MessageBreak}%
-\makefakeeuro}}
-%    \end{macrocode}
-%\end{macro}
-%
-%\begin{macro}{\cmrfakeeuro}
-%\begin{macro}{\cmssfakeeuro}
-%\begin{macro}{\cmttfakeeuro}
-%    \begin{macrocode}
-\providecommand{\cmrfakeeuro}{%
-\EF@debugrep{\protect\cmrfakeeuro}\fakelighteuro}
-%
-\providecommand{\cmssfakeeuro}{%
-\EF@debugrep{\protect\cmssfakeeuro}\fakemediumeuro}
-%
-\providecommand{\cmttfakeeuro}{%
-\EF@debugrep{\protect\cmttfakeeuro}\fakemediumeuro}
-%    \end{macrocode}
-%\end{macro}
-%\end{macro}
-%\end{macro}
-%\begin{macro}{\makefakeeuro}
-%\begin{macro}{\makefakeheavyeuro}
-%\begin{macro}{\makefakemediumeuro}
-%\begin{macro}{\makefakelighteuro}
-% If \comname{<fam>fakeeuro} exists, do \comname{<fam>fakeeuro}; else 
-% \comname{fakelighteuro}, \comname{fake\-mediumeuro}, or 
-% \comname{fakeheavyeuro} depending).
-% 
-% |\providecommand|s again so that these definitions can be 
-% over-ridden in the config file
-% 
-%    \begin{macrocode}
-\providecommand{\makefakemediumeuro}{\EF@debugrep{makefakemediumeuro}%
-\@ifundefined{\f@family fakeeuro}{\fakemediumeuro}%
-{\csname\f@family fakeeuro\endcsname}}
-%
-\providecommand{\makefakelighteuro}{\EF@debugrep{makefakelighteuro}%
-\@ifundefined{\f@family fakeeuro}{\fakelighteuro}%
-{\csname\f@family fakeeuro\endcsname}}
-%
-\providecommand{\makefakeheavyeuro}{\EF@debugrep{makefakeheavyeuro}%
-\@ifundefined{\f@family fakeeuro}{\fakeheavyeuro}%
-{\csname\f@family fakeeuro\endcsname}}
-%
-\providecommand{\makefakeeuro}{\EF@debugrep{makefakeeuro}%
-\@ifundefined{\f@family fakeeuro}{%
-% if \<fam>fakeeuro doesn't exist, do this:
-\EF@checkiflisted{\f@family}{\fakelightlist}\relax
-  \ifEF@listed \makefakelighteuro
-    \else
-    \EF@checkiflisted{\f@family}{\fakemediumlist}\relax
-    \ifEF@listed \makefakemediumeuro
-      \else
-      \EF@checkiflisted{\f@family}{\fakeheavylist}\relax
-      \ifEF@listed \makefakeheavyeuro
-        \else%                If <fam>'s not listed,
-        \makefakemediumeuro%  print medium faked euro
-        \fi \fi \fi
-}%
-% If \<fam>fakeeuro does exist, execute it:
-{\csname\f@family fakeeuro\endcsname}}
-%    \end{macrocode}
-%\end{macro}
-%\end{macro}
-%\end{macro}
-%\end{macro}
-%
-% This turned into a heavy bummer.  Re-wrote the faking code to push 
-% the top rule to the right and the bottom rule to the left when the 
-% fount slants.
-%
-%\begin{macro}{\pzcfakeeuro}
-%    \begin{macrocode}
-\providecommand{\pzcfakeeuro}{\EF@debugrep{pzcfakeeuro}%
-% \@tempdima=1ex% you what?
-% commented out until I find out what I thought I was doing
-\fakemediumeuro[-0.1ex]}
-%    \end{macrocode}
-%\end{macro}
-%
-% \subsection{Make euro commands}
-% 
-% Can't just |\let| one equal to the other because of the debugging 
-% reports.
-%\begin{macro}{\maketexteuro}
-%\begin{macro}{\cmeuro}
-%    \begin{macrocode}
-\providecommand{\maketexteuro}{\EF@debugrep{maketexteuro}%
-\EFiftexteuroexists{\texteuro}{\makefakeeuro}}
-%
-\providecommand{\cmeuro}{\EF@debugrep{cmeuro}%
-\EFiftexteuroexists{\texteuro}{\makefakeeuro}}
-%    \end{macrocode}
-%\end{macro}
-%\end{macro}
-%
-% If the eurosym option's been specified, switch to eurosym's version of 
-% the euro for: the Computer Modern families, serifeuro, sanseuro, and 
-% monoeuro, and the default euro.
-% 
-% This is the only place where these euro commands are defined; use 
-% \comname{provide\-command} so they can be over-ridden by the config 
-% file.
-% 
-% \begin{macro}{\makecmeuro}
-% \begin{macro}{\makedefaulteuro}
-% \begin{macro}{\makeserifeuro}
-% \begin{macro}{\makesanseuro}
-% \begin{macro}{\makemonoeuro}\hfuzz=33.66232pt
-%    \begin{macrocode}
-\ifEF@eurosym
-\EF@debugrep{Using eurosym's euro command}
-\providecommand{\makecmeuro}     {\EF@debugrep{makecmeuro;      ESeuro}\ESeuro}
-\providecommand{\makedefaulteuro}{\EF@debugrep{makedefaulteuro; ESeuro}\ESeuro}
-\providecommand{\makeserifeuro}  {\EF@debugrep{makeserifeuro;   ESeuro}\ESeuro}
-\providecommand{\makesanseuro}   {\EF@debugrep{makesanseuro;    ESeuro}\ESeuro}
-\providecommand{\makemonoeuro}   {\EF@debugrep{makemonoeuro;    ESeuro}\ESeuro}
-\else
-\EF@debugrep{Not using eurosym's euro command}
-\providecommand{\makecmeuro}     {\EF@debugrep{makecmeuro     }\cmeuro}
-\providecommand{\makedefaulteuro}{\EF@debugrep{makedefaulteuro}\makefakeeuro}
-\providecommand{\makeserifeuro}  {\EF@debugrep{makeserifeuro  }\serifeuro}
-\providecommand{\makesanseuro}   {\EF@debugrep{makesanseuro   }\sanseuro}
-\providecommand{\makemonoeuro}   {\EF@debugrep{makemonoeuro   }\monoeuro}
-\fi
-%    \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-% \begin{macro}{\makechinaeeuro}
-% This command needs a test to detect the existence of the china2e tfm 
-% file before trying to use the fount
-%    \begin{macrocode}
-\providecommand{\makechinaeeuro}
-               {\EF@debugrep{makechinaeeuro}\chinaeeuro}
-%    \end{macrocode}
-% \end{macro}
-% 
-% Note: |\makecmeuro|+|\maketexteuro| could have identical definitions, 
-% since |\makefakeeuro| will call |\<fam>euro| if it exists before trying the 
-% generic fake euro code.  (much later)  Does anyone know what I mean by this?
-% 
-% {\small\hfuzz=32.4455pt
-%\begin{verbatim}
-% If \f@family is in \userlist, \makeusereuro
-%   else
-%   if \<fam>euro exists, \<fam>euro
-%     else
-%     if \f@family is in \texteurolist, \maketexteuro
-%       else
-%       if \@family is in \chinaelist, \makechinaeeuro
-%         else
-%         if \f@family is in \cmlist, \makecmeuro
-%           else
-%           if \f@family is in \serifeurolist, \makeserifeuro
-%             else
-%             if \f@family is in \sanseurolist, \makesanseuro
-%               else
-%               if \f@family is in \monoeurolist, \makemonoeuro
-%                 else
-%                 if \f@family is in \makefakemediumeurolist, \makefakemediumeuro
-%                   else
-%                   if \f@family is in \makefakeheavyeurolist, \makefakeheavyeuro
-%                     else
-%                     if \f@family is in \makefakelighteurolist, \makefakelighteuro
-%                       else \makedefaulteuro
-%                       fi fi fi fi fi fi fi fi fi fi fi
-%\end{verbatim}
-%}
-% |\makecmeuro|:
-%\begin{verbatim}
-% \texteuro if:
-%    not in \faketexteurolist and  TS1<fam>.fd and \texteuro exist,
-%       \makefakeeuro otherwise
-%\end{verbatim}
-%
-% |\maketexteuro|:
-%\begin{verbatim}
-% \texteuro if:
-%    not in \faketexteurolist and  TS1<fam>.fd and \texteuro exist, 
-%   \makefakeeuro otherwise
-%\end{verbatim}
-%
-% This is it\ldots\  The |\relaxes| are in there just to suppress unwanted 
-% spaces and let me use the visual formatting in the command that I 
-% wanted to.
-%
-%\begin{macro}{\EFeuro}\hfuzz=66.73694pt
-%    \begin{macrocode}
-\DeclareRobustCommand{\EFeuro}{\EF@debugrep{start EFeuro: 
- \f@encoding/\f@family/\f@series/\f@shape}%
- \EF@checkiflisted{\f@family}{\userlist}\relax
- \ifEF@listed\EF@debugrep{EFeuro makeuser euro}\makeusereuro
-  \else
-  \@ifundefined{\f@family euro}{\@tempswatrue}%   test for \<fam>euro
-  {\EF@debugrep{EFeuro \f@family euro}\relax%           do \<fam>euro
-  \@tempswafalse\csname\f@family euro\endcsname}\relax% do \<fam>euro
-  \if@tempswa% if \<fam>euro doesn't exist, do the next test
-    \EF@checkiflisted{\f@family}{\texteurolist}\relax
-    \ifEF@listed \EF@debugrep{EFeuro texteuro}\maketexteuro
-      \else
-      \EF@checkiflisted{\f@family}{\chinaelist}\relax
-      \ifEF@listed \EF@debugrep{EFeuro China2e euro}\makechinaeeuro
-        \else
-        \EF@checkiflisted{\f@family}{\cmlist}\relax
-        \ifEF@listed \EF@debugrep{EFeuro cm euro}\makecmeuro
-          \else
-          \EF@checkiflisted{\f@family}{\seriflist}\relax
-          \ifEF@listed \EF@debugrep{EFeuro serif euro}\makeserifeuro
-            \else
-            \EF@checkiflisted{\f@family}{\sanslist}\relax
-            \ifEF@listed \EF@debugrep{EFeuro sans euro}\makesanseuro
-              \else
-              \EF@checkiflisted{\f@family}{\monolist}\relax
-              \ifEF@listed \EF@debugrep{EFeuro mono euro}\makemonoeuro
-                \else
-                \EF@checkiflisted{\f@family}{\fakelightlist}\relax
-                \ifEF@listed \EF@debugrep{EFeuro fake light euro}\makefakelighteuro
-                  \else
-                  \EF@checkiflisted{\f@family}{\fakemediumlist}\relax
-                  \ifEF@listed \EF@debugrep{EFeuro fake med euro}\makefakemediumeuro
-                    \else
-                    \EF@checkiflisted{\f@family}{\fakeheavylist}\relax
-                    \ifEF@listed \EF@debugrep{EFeuro fake heavy euro}\makefakeheavyeuro
-                      \else \EF@debugrep{EFeuro default euro}\makedefaulteuro
-                      \fi \fi \fi \fi \fi \fi \fi \fi \fi \fi \fi}
-%    \end{macrocode}
-%\end{macro}
-%
-% Now then\ldots \packname{eurofont's} euro-generating command is 
-% defined as \comname{EFeuro} to begin with. That's so that it can be 
-% defined without clashing with anything else (with luck). The following 
-% code is to try and ensure that the \comname{euro} command used in the 
-% document is what \packname{eurofont} wants it to be. If 
-% \packname{eurosym}'s been loaded, its \comname{euro} command is saved 
-% as \comname{ESeuro} just after its been loaded, and if any command 
-% called \comname{euro} exists at all, it's renamed \comname{oldeuro} 
-% at the \comname{begin\{document\}} command. Yes, that does mean that 
-% \comname{ESeuro} and \comname{oldeuro} can end up identical if 
-% you've loaded the \packname{eurosym} package.
-%
-%    \begin{macrocode}
-\AtBeginDocument{%
-% \@ifpackageloaded{eurosym}{\let\ESeuro\euro}{}% save eurosym's \euro
-% No: this is redundant to an extent.  If the eurosym option has been 
-% specified, \ESeuro has already be \let to \euro.  Best to leave it 
-% at that, I think: any already-defined \euro command will be saved 
-% as \EFoldeuro anyway.
-\let\oldeuro\euro% save the previous \euro command (if one exists)
-\let\euro\EFeuro}% make the \euro command be \EFeuro come what may
-%    \end{macrocode}
-%        
-%    \begin{macrocode}               
-\endinput
-%    \end{macrocode}
-% \Finale
-%\iffalse
-%</package>
-%% 
-%% End of file `eurofont.sty'
-%% \fi
\ No newline at end of file
diff --git a/Master/texmf-dist/doc/fonts/eurofont/eurofont.ins b/Master/texmf-dist/doc/fonts/eurofont/eurofont.ins
deleted file mode 100644
index 65c20f0b983..00000000000
--- a/Master/texmf-dist/doc/fonts/eurofont/eurofont.ins
+++ /dev/null
@@ -1,451 +0,0 @@
-\iffalse
-Copyright 1998 Rowland McDonnell
-This file is part of the eurofont distribution.  You can distribute it 
-freely provided that you include the rest of the eurofont distribution 
-with this file and make no more than a nominal charge to cover the 
-costs of distributing it.
-
-If you would like to change the contents of this file, please make a 
-copy of it under a different name and change that instead. Keep my 
-copyright notice attached, but make it clear that the new file is your 
-responsibility so you get the credit for the improvements and I don't 
-get blamed for the bugs.
-\fi
-\ProvidesFile{eurofont.ins}
-%
-% fd file for Marvosym:
-\begin{filecontents}{uzmvs.fd}
-% Filename: uzmvs.fd
-% Copyright 1998 Rowland McDonnell
-% email rebecca@astrid.u-net.com
-%
-% Fount definitions for Marvosym
-%
-% THIS FILE SHOULD BE PUT IN A TEX INPUTS DIRECTORY
-%
-% The slightly strange name is because Marvosym already has an 
-% official name and I'd like to avoid any conflicts.  So make the 
-% Marvosym used by eurofont.sty a bizzare one (z prefix) because 
-% nothing else seems right to me.
-%
-% Please don't use this file for anything directly: it's meant to 
-% provide NFSS fount definitions so that the eurofont package can make 
-% a half-decent job of printing euro symbols using the Marvosym 
-% fount.  Because of this, it's a bit eccentric to match eurofont's 
-% eccentric way of doing things.
-%
-% If you want to modify the code in this file, save the file under a 
-% different name and modify *that*.  Please make sure you add a note 
-% indicating that you've changed things.
-%
-\ProvidesFile{uzmvs.fd}
-   [1998/10/10 Hacked by RJMM font definitions for U/zmvs.]
-%
-\DeclareFontFamily{U}{zmvs}{}
-\DeclareFontShape{U}{zmvs}{m}{n} {<-> fmvr8x}{}
-%
-% Extra font defs needed
-\DeclareFontShape{U}{zmvs}{m}{it}{<-> fmvri8x}{}
-\DeclareFontShape{U}{zmvs}{m}{sl}{<-> fmvri8x}{}
-\DeclareFontShape{U}{zmvs}{m}{sc}{<-> fmvr8x}{}
-%
-\DeclareFontShape{U}{zmvs}{l}{n} {<-> fmvr8x}{}
-\DeclareFontShape{U}{zmvs}{l}{it}{<-> fmvri8x}{}
-\DeclareFontShape{U}{zmvs}{l}{sl}{<-> fmvri8x}{}
-\DeclareFontShape{U}{zmvs}{l}{sc}{<-> fmvr8x}{}
-%
-\DeclareFontShape{U}{zmvs}{l} {ui} {<->ssub * zmvs/m/n}{}
-\DeclareFontShape{U}{zmvs}{m} {ui} {<->ssub * zmvs/m/n}{}
-%
-\endinput
-\end{filecontents}
-
-% fd file for Adobe Euroserif:
-\begin{filecontents}{uzpeur.fd}
-% Filename: uzpeur.fd
-% Copyright 1998 Rowland McDonnell
-% email rebecca@astrid.u-net.com
-%
-% Fount definitions for Adobe Euroserif
-%
-%THIS FILE SHOULD BE PUT IN A TEX INPUTS DIRECTORY
-
-\ProvidesFile{uzpeur.fd}
-   [1998/10/10 Eurofont package font definitions for U/zpeur.]
-
-\DeclareFontFamily{U}{zpeur}{\hyphenchar\font\m@ne}%
-
-\DeclareFontShape{U}{zpeur}{m}{n} {<->zpeur} {}
-\DeclareFontShape{U}{zpeur}{m}{it}{<->zpeuri}{}
-\DeclareFontShape{U}{zpeur}{m}{sl}{<->ssub * zpeur/m/it}{}
-\DeclareFontShape{U}{zpeur}{m}{sc}{<->ssub * zpeur/m/n}{}
-
-\DeclareFontShape{U}{zpeur}{b}{n} {<->zpeub} {}
-\DeclareFontShape{U}{zpeur}{b}{it}{<->zpeubi}{}
-\DeclareFontShape{U}{zpeur}{b}{sl}{<->ssub * zpeur/b/it} {}
-\DeclareFontShape{U}{zpeur}{b}{sc}{<->ssub * zpeur/b/n}{}
-
-\DeclareFontShape{U}{zpeur}{l}{n} {<->ssub * zpeur/m/n} {}
-\DeclareFontShape{U}{zpeur}{l}{it}{<->ssub * zpeur/m/it}{}
-\DeclareFontShape{U}{zpeur}{l}{sl}{<->ssub * zpeur/m/it}{}
-\DeclareFontShape{U}{zpeur}{l}{sc}{<->ssub * zpeur/m/n} {}
-
-\DeclareFontShape{U}{zpeur}{bx}{n} {<->ssub * zpeur/b/n} {}
-\DeclareFontShape{U}{zpeur}{bx}{it}{<->ssub * zpeur/b/it}{}
-\DeclareFontShape{U}{zpeur}{bx}{sl}{<->ssub * zpeur/b/it}{}
-\DeclareFontShape{U}{zpeur}{bx}{sc}{<->ssub * zpeur/b/n} {}
-
-\DeclareFontShape{U}{zpeur}{l} {ui} {<->ssub * zpeur/m/n}{}
-\DeclareFontShape{U}{zpeur}{m} {ui} {<->ssub * zpeur/m/n}{}
-\DeclareFontShape{U}{zpeur}{b} {ui} {<->ssub * zpeur/b/n}{}
-\DeclareFontShape{U}{zpeur}{bx}{ui} {<->ssub * zpeur/b/n}{}
-%
-\endinput
-\end{filecontents}
-
-% fd file for Adobe Eurosans:
-\begin{filecontents}{uzpeuss.fd}
-% Filename: uzpeuss.fd
-% Copyright 1998 Rowland McDonnell
-% email rebecca@astrid.u-net.com
-%
-% Fount definitions for Adobe Eurosans
-%
-%THIS FILE SHOULD BE PUT IN A TEX INPUTS DIRECTORY
-
-\ProvidesFile{uzpeuss.fd}
-   [1998/10/10 Eurofont package font definitions for U/zpeuss.]
-
-\DeclareFontFamily{U}{zpeuss}{\hyphenchar\font\m@ne}%
-
-\DeclareFontShape{U}{zpeuss}{m}{n} {<->zpeurs} {}
-\DeclareFontShape{U}{zpeuss}{m}{it}{<->zpeuris}{}
-\DeclareFontShape{U}{zpeuss}{m}{sl}{<->ssub * zpeuss/m/it}{}
-\DeclareFontShape{U}{zpeuss}{m}{sc}{<->ssub * zpeuss/m/n}{}
-
-\DeclareFontShape{U}{zpeuss}{b}{n} {<->zpeubs} {}
-\DeclareFontShape{U}{zpeuss}{b}{it}{<->zpeubis}{}
-\DeclareFontShape{U}{zpeuss}{b}{sl}{<->ssub * zpeuss/b/it} {}
-\DeclareFontShape{U}{zpeuss}{b}{sc}{<->ssub * zpeuss/b/n}{}
-
-\DeclareFontShape{U}{zpeuss}{l}{n} {<->ssub * zpeuss/m/n}{}
-\DeclareFontShape{U}{zpeuss}{l}{it}{<->ssub * zpeuss/m/it}{}
-\DeclareFontShape{U}{zpeuss}{l}{sl}{<->ssub * zpeuss/m/it}{}
-\DeclareFontShape{U}{zpeuss}{l}{sc}{<->ssub * zpeuss/m/n} {}
-
-\DeclareFontShape{U}{zpeuss}{bx}{n} {<->ssub * zpeuss/b/n} {}
-\DeclareFontShape{U}{zpeuss}{bx}{it}{<->ssub * zpeuss/b/it}{}
-\DeclareFontShape{U}{zpeuss}{bx}{sl}{<->ssub * zpeuss/b/it}{}
-\DeclareFontShape{U}{zpeuss}{bx}{sc}{<->ssub * zpeuss/b/n} {}
-
-\DeclareFontShape{U}{zpeuss}{l} {ui} {<->ssub * zpeuss/m/n}{}
-\DeclareFontShape{U}{zpeuss}{m} {ui} {<->ssub * zpeuss/m/n}{}
-\DeclareFontShape{U}{zpeuss}{b} {ui} {<->ssub * zpeuss/m/b}{}
-\DeclareFontShape{U}{zpeuss}{bx}{ui} {<->ssub * zpeuss/m/b}{}
-%
-\endinput
-\end{filecontents}
-
-% fd file for Adobe Euromono:
-\begin{filecontents}{uzpeutt.fd}
-%Filename: uzpeutt.fd
-% Copyright 1998 Rowland McDonnell
-% email rebecca@astrid.u-net.com
-%
-% Fount definitions for Adobe Euromono
-%
-%THIS FILE SHOULD BE PUT IN A TEX INPUTS DIRECTORY
-
-\ProvidesFile{Uzpeutt.fd}
-   [1998/10/10 Eurofont package font definitions for U/zpeutt.]
-
-\DeclareFontFamily{U}{zpeutt}{\hyphenchar\font\m@ne}%
-
-\DeclareFontShape{U}{zpeutt}{m}{n} {<->zpeurt} {}
-\DeclareFontShape{U}{zpeutt}{m}{it}{<->zpeurit}{}
-\DeclareFontShape{U}{zpeutt}{m}{sl}{<->ssub * zpeutt/m/it}{}
-\DeclareFontShape{U}{zpeutt}{m}{sc}{<->ssub * zpeutt/m/n}{}
-
-\DeclareFontShape{U}{zpeutt}{b}{n} {<->zpeubt} {}
-\DeclareFontShape{U}{zpeutt}{b}{it}{<->zpeubit}{}
-\DeclareFontShape{U}{zpeutt}{b}{sl}{<->ssub * zpeutt/b/it} {}
-\DeclareFontShape{U}{zpeutt}{b}{sc}{<->ssub * zpeutt/b/n}{}
-
-\DeclareFontShape{U}{zpeutt}{l}{n} {<->ssub * zpeutt/m/n}{}
-\DeclareFontShape{U}{zpeutt}{l}{it}{<->ssub * zpeutt/m/it}{}
-\DeclareFontShape{U}{zpeutt}{l}{sl}{<->ssub * zpeutt/m/it}{}
-\DeclareFontShape{U}{zpeutt}{l}{sc}{<->ssub * zpeutt/m/n} {}
-
-\DeclareFontShape{U}{zpeutt}{bx}{n} {<->ssub * zpeutt/b/n} {}
-\DeclareFontShape{U}{zpeutt}{bx}{it}{<->ssub * zpeutt/b/it}{}
-\DeclareFontShape{U}{zpeutt}{bx}{sl}{<->ssub * zpeutt/b/it}{}
-\DeclareFontShape{U}{zpeutt}{bx}{sc}{<->ssub * zpeutt/b/n} {}
-
-\DeclareFontShape{U}{zpeutt}{l} {ui} {<->ssub * zpeutt/m/n}{}
-\DeclareFontShape{U}{zpeutt}{m} {ui} {<->ssub * zpeutt/m/n}{}
-\DeclareFontShape{U}{zpeutt}{b} {ui} {<->ssub * zpeutt/m/b}{}
-\DeclareFontShape{U}{zpeutt}{bx}{ui} {<->ssub * zpeutt/m/b}{}
-%
-\endinput
-\end{filecontents}
-
-% Config file
-\begin{filecontents}{eurofont.cfg}
-% Configuration file for the eurofont package
-% Copyright 1998 Rowland McDonnell
-% email rebecca@astrid.u-net.com
-% 
-% Please do change this file as much as you like, but don't distribute 
-% modified versions.
-%
-% If you change this file, do make sure that you change the date,  
-% version number, and identification note below:
-%
-\ProvidesFile{eurofont.cfg}[1998/11/03 v1.0 Default config file for 
-the eurofont package]
-%
-% List contents                                Corresponding command
-%
-\EFaddtolist{\userlist}{}%                     \makeusereuro
-\EFaddtolist{\texteurolist}{}%                 \maketexteuro
-\EFaddtolist{\chinaelist}{}%                   \makechinaeeuro
-\EFaddtolist{\cmlist}{cmr,cmss,cmtt}%          \makecmeuro
-\EFaddtolist{\seriflist}{pbk,pnc,ppl,ptm,put}% \makeserifeuro
-\EFaddtolist{\sanslist}{pag,phv,psy,pzd}%      \makesanseuro
-\EFaddtolist{\monolist}{pcr}%                  \makemonoeuro
-\EFaddtolist{\fakemediumlist}{pzc}%            \makefakemediumeuro
-\EFaddtolist{\fakelightlist}{}%                \makefakelighteuro
-\EFaddtolist{\fakeheavylist}{}%                \makefakeheavyeuro
-%
-\EFaddtolist{\faketexteurolist}{}
-%
-% Put all the standard LaTeX weights (and likely extras)
-% into one of the following lists:
-%
-\EFaddtolist{\EFlightserieslist}{ul,el,l,ulc,elc,lc,ulx,elx,lx}
-\EFaddtolist{\EFmediumserieslist}{m,mb,db,sb,mc,mbc,dbc,sbc,mx,mbx,dbx,sbx}
-\EFaddtolist{\EFboldserieslist}{b,bx,bc}
-\EFaddtolist{\EFultraboldserieslist}{eb,ub,ebc,ubc,ebx,ubx}
-%
-% And two non-standard weights:
-%
-\EFaddtolist{\EFultraboldserieslist}{xb,ebd}
-%
-\endinput
-\end{filecontents}
-\begin{filecontents}{dvidrive.txt}
-File dvidrive.txt
-Copyright 1998 Rowland McDonnell
-email rebecca@astrid.u-net.com
-
-
-This file contains information on how to configure dvips and OzTeX to use 
-Adobe's Eurofonts and the Marvosym fount.  I believe that pdfTeX can use 
-dvips entries.
-
-If there are any problems with the information below, or if you have 
-information on how to configure other dvi drivers, please let me know by 
-emailing: rebecca@astrid.u-net.com
-
-
-DVI DRIVER CONFIGURATION LINES FOR ADOBE'S EUROFONTS
-====================================================
-
-Note that versions of dvips before v5.83 have trouble doing partial fount 
-downloading with Adobe's Eurofonts. Because of this, I have listed the 
-dvips psfont.map entries with `|<<|' and with `|<|': the `|<<|' 
-entries prevent dvips attempting to do partial fount downloading with 
-that particular fount.
-
-The `<<' syntax does not work with all versions of dvips; it does work 
-with dvips v5.78, but doesn't work with v5.70. If you're using a pre 
-`<<' dvips, you should use the entries with `<' and don't use partial 
-fount downloading with any document containing Adobe's Eurofonts; 
-passing the -j0 switch to dvips will prevent it from doing partial 
-fount downloading if this is normally turned on.
-
-I've asked the author of dvips when the `<<' syntax was first 
-introduced, and he can't remember.
-
-I am told that pdftex can do partial fount downloading using Adobe's 
-Eurofonts.
-
-Eurofont configuration lines for Windows/Unix/any others?
-=========================================================
-
-(you need to re-name the *.PFB files *.pfb; thanks to Stefan Ulrich 
-<ulrich@cis.uni-muenchen.de> for this and the following entries)
-
-
-psfonts.map entries for Windows/Unix/other
-dvips v5.78 or similar
-
-zpeurs  EuroSans-Regular     <<_1______.pfb
-zpeubs  EuroSans-Bold        <<_1B_____.pfb
-zpeuris EuroSans-Italic      <<_1I_____.pfb
-zpeubis EuroSans-BoldItalic  <<_1BI____.pfb
-zpeurt  EuroMono-Regular     <<_2______.pfb
-zpeubt  EuroMono-Bold        <<_2B_____.pfb
-zpeurit EuroMono-Italic      <<_2I_____.pfb
-zpeubit EuroMono-BoldItalic  <<_2BI____.pfb
-zpeur   EuroSerif-Regular    <<_3______.pfb
-zpeub   EuroSerif-Bold       <<_3B_____.pfb
-zpeuri  EuroSerif-Italic     <<_3I_____.pfb
-zpeubi  EuroSerif-BoldItalic <<_3BI____.pfb
-
-
-psfonts.map entries for Windows/Unix/other
-dvips v5.70 or before, dvips v5.83 and above, and pdftex:
-
-(note that I don't use pdftex; this suggestion might not work)
-
-zpeurs  EuroSans-Regular     <_1______.pfb
-zpeubs  EuroSans-Bold        <_1B_____.pfb
-zpeuris EuroSans-Italic      <_1I_____.pfb
-zpeubis EuroSans-BoldItalic  <_1BI____.pfb
-zpeurt  EuroMono-Regular     <_2______.pfb
-zpeubt  EuroMono-Bold        <_2B_____.pfb
-zpeurit EuroMono-Italic      <_2I_____.pfb
-zpeubit EuroMono-BoldItalic  <_2BI____.pfb
-zpeur   EuroSerif-Regular    <_3______.pfb
-zpeub   EuroSerif-Bold       <_3B_____.pfb
-zpeuri  EuroSerif-Italic     <_3I_____.pfb
-zpeubi  EuroSerif-BoldItalic <_3BI____.pfb
-
-
-Eurofont configuration lines for Macs
-=====================================
-
-
-Macintosh psfonts.map entries for dvips v5.78 or similar
-
-zpeur   EuroSerif-Regular     <<EuroSerReg
-zpeuri  EuroSerif-Italic      <<EuroSerIta
-zpeub   EuroSerif-Bold        <<EuroSerBol
-zpeubi  EuroSerif-BoldItalic  <<EuroSerBolIta
-zpeurs  EuroSans-Regular      <<EuroSanReg
-zpeuris EuroSans-Italic       <<EuroSanIta
-zpeubs  EuroSans-Bold         <<EuroSanBol
-zpeubis EuroSans-BoldItalic   <<EuroSanBolIta
-zpeurt  EuroMono-Regular      <<EuroMonReg
-zpeurit EuroMono-Italic       <<EuroMonIta
-zpeubt  EuroMono-Bold         <<EuroMonBol
-zpeubit EuroMono-BoldItalic   <<EuroMonBolIta
-
-
-Macintosh psfonts.map entries for
-dvips v5.70 or before, dvips v5.83 and above, and pdftex:
-
-(note that I don't use pdftex; this suggestion might not work)
-
-zpeur   EuroSerif-Regular     <EuroSerReg
-zpeuri  EuroSerif-Italic      <EuroSerIta
-zpeub   EuroSerif-Bold        <EuroSerBol
-zpeubi  EuroSerif-BoldItalic  <EuroSerBolIta
-zpeurs  EuroSans-Regular      <EuroSanReg
-zpeuris EuroSans-Italic       <EuroSanIta
-zpeubs  EuroSans-Bold         <EuroSanBol
-zpeubis EuroSans-BoldItalic   <EuroSanBolIta
-zpeurt  EuroMono-Regular      <EuroMonReg
-zpeurit EuroMono-Italic       <EuroMonIta
-zpeubt  EuroMono-Bold         <EuroMonBol
-zpeubit EuroMono-BoldItalic   <EuroMonBolIta
-
-
-OzTeX config file entries
-
-zpeur     EuroSerif-Regular        "Euro Serif"                  nil   
-zpeuri    EuroSerif-Italic         "Euro Serif"                  nil i 
-zpeub     EuroSerif-Bold           "Euro Serif"                  nil b 
-zpeubi    EuroSerif-BoldItalic     "Euro Serif"                  nil bi
-zpeurs    EuroSans-Regular         "Euro Sans"                   nil   
-zpeuris   EuroSans-Italic          "Euro Sans"                   nil i 
-zpeubs    EuroSans-Bold            "Euro Sans"                   nil b 
-zpeubis   EuroSans-BoldItalic      "Euro Sans"                   nil bi
-zpeurt    EuroMono-Regular         "Euro Monospace"              nil   
-zpeurit   EuroMono-Italic          "Euro Monospace"              nil i 
-zpeubt    EuroMono-Bold            "Euro Monospace"              nil b 
-zpeubit   EuroMono-BoldItalic      "Euro Monospace"              nil bi
-
-
-DVI DRIVER CONFIGURATION LINES FOR MARVOSYM
-===========================================
-
-Here are some lines to configure dvips to use the Marvosym fount:
-
-Dvips psfonts.map entries for the original Marvosym fount:
-
-fmvr8x  Martin_Vogels_Symbole                   <marvosym.pfb
-fmvri8x Martin_Vogels_Symbole " .167 SlantFont" <marvosym.pfb
-
-
-Dvips psfonts.map entries for the Y&Y `ATM compatible' 
-re-worked Marvosym fount:
-
-fmvr8x   Marvosym                    <marvosym.pfb
-fmvri8x  Marvosym " .167 SlantFont"  <marvosym.pfb
-
-
-I have assumed that all dvi drivers that can use PostScript Type 1 
-founts can also produce fake italic founts by slanting an upright 
-version. Because of this, I have made no provision for dvi drivers 
-that can't do this. If you have a dvi driver that can't fake an 
-italic, please let me know and I'll modify the eurofont package to 
-take this into account, probably by adding another option and writing 
-a new fd file.
-
-Note for Macintosh users
-
-A Mac version of the Marvosym fount has been created in PostScript Type 1 
-and TrueType versions. It uses the Y&Y names as above, and these lines are 
-be needed for dvips's psfonts.map file:
-
-fmvr8x   Marvosym                    <Marvo
-fmvri8x  Marvosym " .167 SlantFont"  <Marvo
-
-And these lines for OzTeX's default config file:
-
-fmvr8x    Marvosym     Marvosym     nil
-fmvri8x   Marvosym     Marvosym     nil i
-
-
-If a version of the original Marvosym fount is ever released for Macs, 
-these  lines will be needed for dvips's psfonts.map file:
-
-fmvr8x  Martin_Vogels_Symbole                   <MartiVogSym
-fmvri8x Martin_Vogels_Symbole " .167 SlantFont" <MartiVogSym
-
-And these lines for OzTeX's default config file:
-
-fmvr8x    MartiVogSym  "Martin Vogels Symbole"       nil
-fmvri8x   MartiVogSym  "Martin Vogels Symbole"       nil i
-\end{filecontents}
-
-\begin{filecontents}{eurofont.tmp}
-\ProvidesFile{eurofont.tmp}
-\def\batchfile{eurofont.tmp}
-\input{docstrip}
-\keepsilent
-\generateFile{eurofont.sty}{t}{\from{eurofont.dtx}{package}}
-\typeout{Finished stripping the comments from eurofont.dtx.}
-\typeout{}
-\typeout{To finish the installation, put these files in a sensible place}
-\typeout{on your system's TeX search path:}
-\typeout{}
-\typeout{eurofont.sty, eurofont.cfg, and all the files ending in fd.}
-\typeout{}
-\typeout{To produce the documentation, run LaTeX on eurofont.dtx.}
-\typeout{}
-\typeout{To find out what to do with the tfm files, read the documentation.}
-\typeout{}
-\typeout{You might like to keep the original files safe as a backup, or}
-\typeout{in case you want to pass on the eurofont package to someone.}
-\typeout{}
-\typeout{You can delete:}
-\typeout{eurofont.dvi, eurofont.aux, eurofont.toc, eurofont.log, and
-         eurofont.tmp}
-\typeout{}
-\endinput
-\end{filecontents}
-\input{eurofont.tmp}
-\endinput
diff --git a/Master/texmf-dist/doc/fonts/eurofont/eurosamp.pdf b/Master/texmf-dist/doc/fonts/eurofont/eurosamp.pdf
deleted file mode 100644
index b165862be0a..00000000000
--- a/Master/texmf-dist/doc/fonts/eurofont/eurosamp.pdf
+++ /dev/null
diff --git a/Master/texmf-dist/doc/fonts/eurofont/eurosamp.tex b/Master/texmf-dist/doc/fonts/eurofont/eurosamp.tex
deleted file mode 100644
index 2360dc78791..00000000000
--- a/Master/texmf-dist/doc/fonts/eurofont/eurosamp.tex
+++ /dev/null
@@ -1,60 +0,0 @@
-% Simple plain TeX test file for Adobe Euro fonts
-
-\nopagenumbers
-
-\font\eurosansr=zpeurs
-\font\eurosansb=zpeubs
-\font\eurosansi=zpeuris
-\font\eurosansbi=zpeubis
-
-\font\euromonor=zpeurt
-\font\euromonob=zpeubt
-\font\euromonoi=zpeurit
-\font\euromonobi=zpeubit
-
-\font\euroserifr=zpeur
-\font\euroserifb=zpeub
-\font\euroserifi=zpeuri
-\font\euroserifbi=zpeubi
-
-{\bf The `Euro' fonts in ATM compatible Type 1 format from Adobe}
-
-\vskip 2mm
-
-Euro Sans (regular) {\eurosansr This is EuroSans!}
-
-Euro Sans (bold) {\eurosansb This is EuroSans!}
-
-Euro Sans (italic) {\eurosansi This is EuroSans!}
-
-Euro Sans (bold italic) {\eurosansbi This is EuroSans!}
-
-\vskip 2mm
-
-Euro Monospace (regular) {\euromonor This is EuroMonospace!}
-
-Euro Monospace (bold) {\euromonob This is EuroMonospace!}
-
-Euro Monospace (italic) {\euromonoi This is EuroMonospace!}
-
-Euro Monospace (bold italic) {\euromonobi This is EuroMonospace!}
-
-\vskip 2mm
-
-Euro Serif (regular) {\euroserifr This is EuroSerif!}
-
-Euro Serif (bold) {\euroserifb This is EuroSerif!}
-
-Euro Serif (italic) {\euroserifi This is EuroSerif!}
-
-Euro Serif (bold italic) {\euroserifbi This is EuroSerif!}
-
-\vskip 2mm
-
-{\tt http://www.adobe.com/type/eurofont.html}
-
-\vskip 2mm
-
-{\tt ftp://ftp.adobe.com/pub/adobe/type/win/all/eurofont.exe}
-
-\end
diff --git a/Master/texmf-dist/doc/fonts/eurofont/eutest.dvi b/Master/texmf-dist/doc/fonts/eurofont/eutest.dvi
deleted file mode 100644
index 87979be6a7e..00000000000
--- a/Master/texmf-dist/doc/fonts/eurofont/eutest.dvi
+++ /dev/null
diff --git a/Master/texmf-dist/doc/fonts/eurofont/eutest.tex b/Master/texmf-dist/doc/fonts/eurofont/eutest.tex
deleted file mode 100644
index 558f1c83b81..00000000000
--- a/Master/texmf-dist/doc/fonts/eurofont/eutest.tex
+++ /dev/null
@@ -1,46 +0,0 @@
-\documentclass{article}
-\usepackage{times,europs}
-
-\setlength{\parindent}{0mm}
-\setlength{\parskip}{2\baselineskip}
-
-\newcommand{\eutab}[1]{\begin{tabular}{l|cc}%
-       & upright & italic \\%
-\hline%
-medium & \textup{\textmd{#1}} & \textit{\textmd{#1}} \\%
-bold   & \textup{\textbf{#1}} & \textit{\textbf{#1}}%
-\end{tabular}}
-
-\begin{document}
-
-\def\sampletext{%
-The Euro symbol \eur{} comes in different shapes, depending on the
-\textbf{current context \eur}. Font changes \textit{can \eur{} be followed,
-\textbf{even if \eur{} they are nested}}. \textsf{Changes of \eur{} the font
-family} \texttt{are handled \eur{} differently.}
-}
-
-\let\eur\EUR
-\sampletext
-
-\textrm{EuroSerif}:\\
-\eutab{\EURtm}\\
-\let\eur\EURtm
-\sampletext
-
-\textsf{EuroSans}:\\
-\eutab{\EURhv}\\
-\let\eur\EURhv
-\sampletext
-
-\texttt{EuroMono}:\\
-\eutab{\EURcr}\\
-\let\eur\EURcr
-\sampletext
-
-\textrm{official}:\\
-\eutab{\EURofc}\\
-\let\eur\EURofc
-\sampletext
-
-\end{document}
diff --git a/Master/texmf-dist/doc/fonts/eurofont/readme.txt b/Master/texmf-dist/doc/fonts/eurofont/readme.txt
deleted file mode 100644
index 86129438266..00000000000
--- a/Master/texmf-dist/doc/fonts/eurofont/readme.txt
+++ /dev/null
@@ -1,124 +0,0 @@
-File readme.txt
-Part of the eurofont package
-Copyright 1998 Rowland McDonnell
-email: rebecca@astrid.u-net.com
-
-The eurofont package consists of the following files:
-
-adobeuro
-  readme.txt
-  tfmfiles
-    zpeub.tfm
-    zpeubi.tfm
-    zpeubis.tfm
-    zpeubit.tfm
-    zpeubs.tfm
-    zpeubt.tfm
-    zpeur.tfm
-    zpeuri.tfm
-    zpeuris.tfm
-    zpeurit.tfm
-    zpeurs.tfm
-    zpeurt.tfm
-eurofont.dtx
-eurofont.ins
-marvosym
-  readme.txt
-  source
-    fmvr8x.afm
-    mvrit.tex
-  tfmfiles
-    original
-      fmvr8x.tfm
-      fmvri8x.tfm
-    yandy
-      fmvr8x.tfm
-      fmvri8x.tfm
-readme.txt
-
-To install the package, do the following:
-
-Run LaTeX on eurofont.ins
-
-Put eurofont.sty, eurofont.cfg, and all the files ending in .fd into a 
-directory on your tex-inputs search path.
-
-Run LaTeX on eurofont.dtx and print out the documentation.
-
-Read at least the introductory sections of the documentation.
-
-If you want to use Adobe's Eurofonts, put the files zpeub.tfm - 
-zpeurt.tfm (all the files in the adobeuro/tfm/ directory) into a directory 
-on your tex-fonts search path.  The file dvidrive.txt has 
-information on how to configure your dvi driver to use Adobe's Eurofonts.
-
-If you want to use the Marvosym fount, read the eurofont package 
-documentation. The file dvidrive.txt has information on how to configure 
-your dvi driver to use the marvosym fount.
-
-Read the documentation so you can set up the package to meet your needs.
-
-
-FONTS CONTAINING EURO SYMBOLS
-=============================
-
-Aside from the Text Companion founts which accompany the EC founts (the T1 
-encoded version of the standard Computer Modern founts), Metafont euro 
-symbols are included in two other founts that I know of, both available 
-from CTAN. The following urls retrieve the packages from my nearest CTAN 
-mirror:
-
-ftp://ftp.tex.ac.uk/tex-archive/macros/latex/contrib/supported/china2e.zip
-ftp://ftp.tex.ac.uk/tex-archive/fonts/eurosym.zip
-
-(other CTAN sites are listed at the end of this document)
-
-There are PostScript Type 1 founts containing euro symbols: Adobe's 
-Eurofonts, a set of 12 founts providing seriffed, sanserif, and monospaced 
-euro symbols in medium upright, italic, bold, and bold italic version; and 
-the Marvosym fount, which has three euro symbols, very similar to the 
-medium upright seriffed, sanserif, and monospaced euro symbols from 
-Adobe.
-
-Adobe's Eurofonts are available (September 1998) in a Mac version 
-from here:
-
-ftp://ftp.adobe.com/pub/adobe/type/mac/all/eurofont.sea.hqx
-ftp://ftp-pac.adobe.com/pub/adobe/type/mac/all/eurofont.sea.hqx
-
-For Textures users on Macs, take the installer from CTAN:
-
-systems/mac/textures/contrib/IdealFonts/EuroDefs.sit.hqx
-systems/mac/textures/contrib/IdealFonts/README.IF
-
-You should still download Adobe's Eurofonts separately.
-
-And in a version suitable for MS-Windows PCs and Unix from here:
-
-ftp://ftp.adobe.com/pub/adobe/type/win/all/eurofont.exe
-ftp://ftp-pac.adobe.com/pub/adobe/type/win/all/eurofont.exe
-
-these files are self-extracting archives on MS-Windows computers which 
-can be decompressed on Unix computers with the unzip command.
-
-The marvosym fount is available from CTAN; this url retrieves the marvosym 
-fount from my nearest CTAN site (November 1998):
-
-ftp://ftp.tex.ac.uk/tex-archive/fonts/psfonts/marvosym.zip
-
-
-CTAN SITES -- JANUARY 1999.
-===========================
-
-The three CTAN primary sites:
-
-ctan.tug.org (in Massachusetts, USA)
-ftp.dante.de (in Deutschland)
-ftp.tex.ac.uk (in England)
-
-this url can point you to your nearest CTAN site - there are many more 
-than the three above:
-
-http://www.ucc.ie/cgi-bin/ctan
-
-
diff --git a/Master/texmf-dist/fonts/map/dvips/eurofont/zpeu.map b/Master/texmf-dist/fonts/map/dvips/eurofont/zpeu.map
deleted file mode 100644
index 2845e7cce15..00000000000
--- a/Master/texmf-dist/fonts/map/dvips/eurofont/zpeu.map
+++ /dev/null
@@ -1,12 +0,0 @@
-zpeurs   EuroSans-Regular     <zpeurs.pfb
-zpeubs   EuroSans-Bold        <zpeubs.pfb
-zpeuris  EuroSans-Italic      <zpeuris.pfb
-zpeubis  EuroSans-BoldItalic  <zpeubis.pfb
-zpeurt   EuroMono-Regular     <zpeurt.pfb
-zpeubt   EuroMono-Bold        <zpeubt.pfb
-zpeurit  EuroMono-Italic      <zpeurit.pfb
-zpeubit  EuroMono-BoldItalic  <zpeubit.pfb
-zpeur    EuroSerif-Regular    <zpeur.pfb
-zpeub    EuroSerif-Bold       <zpeub.pfb
-zpeuri   EuroSerif-Italic     <zpeuri.pfb
-zpeubi   EuroSerif-BoldItalic <zpeubi.pfb
diff --git a/Master/texmf-dist/source/fonts/eurofont/europs.dtx b/Master/texmf-dist/source/fonts/eurofont/europs.dtx
deleted file mode 100644
index bc0fb439c52..00000000000
--- a/Master/texmf-dist/source/fonts/eurofont/europs.dtx
+++ /dev/null
@@ -1,145 +0,0 @@
-% \iffalse
-%<*driver>
-\documentclass{ltxdoc}
-\begin{document}
-\DocInput{europs.dtx}
-\end{document}
-%</driver>
-% \fi
-%
-% \changes{v1.2}{1999/01/16}{added \\EURofc, updated documentation}
-% \changes{v1.1}{1998/11/02}{switched to docstrip, added subsituition rules}
-% \changes{v1.0}{1998/10/29}{initial version, not using docstrip}
-% 
-% \title{\textsf{europs} -- Using Adobe's Euro Currency Symbol Fonts
-%   with \LaTeXe}
-% \author{J\"orn Clausen\footnote{\texttt{joern@TechFak.Uni-Bielefeld.DE}}}
-% \maketitle
-%
-% \section{The Style File}
-% First we introduce ourself and request a reasonable \LaTeX{} version.
-%    \begin{macrocode}
-%<*style>
-\ProvidesPackage{europs}
-     [1999/01/16 v1.2 Euro Currency Symbol PostScript]
-\NeedsTeXFormat{LaTeX2e}
-%    \end{macrocode}
-%
-% I prefer the \textsf{ifthen} package over using plain\TeX{} commands. This
-% is said to be more portable, anyway\dots
-%    \begin{macrocode}
-\RequirePackage{ifthen}
-%    \end{macrocode}
-%
-% Now we define three macros to access the three font families. The actual
-% glyph each macro produces still depends on the current selection of series
-% and shape. If the macro |\EURtm| is used inside e.g. |\textbf{}|, the
-% macro takes the symbol from EuroSerif Bold.
-% \begin{macro}{\EURtm}
-% |\EURtm| selects the Euro symbol from the EuroSerif family. The name
-% should indicate that this shape can be combined with fonts like Times.
-%    \begin{macrocode}
-\providecommand{\EURtm}{{\fontencoding{U}\fontfamily{zpeu}\selectfont E}}
-%    \end{macrocode}
-% \end{macro}
-% \begin{macro}{\EURhv}
-% |\EURhv| prints the sans serif version of the Euro symbol. The association
-% is that this symbol looks like Helvetica.
-%    \begin{macrocode}
-\providecommand{\EURhv}{{\fontencoding{U}\fontfamily{zpeus}\selectfont E}}
-%    \end{macrocode}
-% \end{macro}
-% \begin{macro}{\EURcr}
-% |\EURcr| finally is a monospaced version of the Euro symbol. It can be
-% combined with Courier and similar typewriter fonts.
-%    \begin{macrocode}
-\providecommand{\EURcr}{{\fontencoding{U}\fontfamily{zpeut}\selectfont E}}
-%    \end{macrocode}
-% \end{macro}
-% \begin{macro}{\EUR}
-% This macro selects one of the three symbols defined above, depending on
-% the current font family. This way, \verb|\EUR| follows all the usual font
-% changes one can perform with the \verb|\text..{}| commands.
-%    \begin{macrocode}
-\providecommand{\EUR}{%
-  \ifthenelse{\equal{\f@family}{\rmdefault}}%
-  {\EURtm}%
-  {\ifthenelse{\equal{\f@family}{\ttdefault}}%
-      {\EURcr}%
-      {\EURhv}}%
-    }
-%    \end{macrocode}
-% \end{macro}
-% \begin{macro}{\EURofc}
-% Having defined all these different symbols, the truth is, that there
-% \emph{should} be only one symbol. It is the one represented by
-% EuroSans Regular. So if you want to conform with the rules of the European
-% bureaucrats, and break the rules of typesetters and designers, you can use
-% |\EURofc| to get the ``official'' Euro symbol, independent of the current
-% context.
-%    \begin{macrocode}
-\providecommand{\EURofc}{{\usefont{U}{zpeus}{m}{n} E}}
-%    \end{macrocode}
-% \end{macro}
-%    \begin{macrocode}
-%</style>
-%    \end{macrocode}
-%
-% \section{The Font Definitions}
-% Now we have to provide font definitions to introduce the three families
-% to NFSS.
-% \subsection{EuroSerif}
-% First, the definitions for EuroSerif:
-%    \begin{macrocode}
-%<*uzpeu>
-\ProvidesFile{uzpeu.fd}
-     [1999/01/16 v1.2 font definitions for U/zpeu]
-\DeclareFontFamily{U}{zpeu}{}
-\DeclareFontShape{U}{zpeu}{m}{n}{<->zpeur}{}
-\DeclareFontShape{U}{zpeu}{m}{it}{<->zpeuri}{}
-\DeclareFontShape{U}{zpeu}{bx}{n}{<->zpeub}{}
-\DeclareFontShape{U}{zpeu}{bx}{it}{<->zpeubi}{}
-%    \end{macrocode}
-% We define some substitution rules that might be useful.
-%    \begin{macrocode}
-\DeclareFontShape{U}{zpeu}{b}{n}{<->ssub * zpeu/bx/n}{}
-\DeclareFontShape{U}{zpeu}{b}{it}{<->ssub * zpeu/bx/it}{}
-\DeclareFontShape{U}{zpeu}{m}{sl}{<->ssub * zpeu/m/it}{}
-\DeclareFontShape{U}{zpeu}{bx}{sl}{<->ssub * zpeu/bx/it}{}
-%</uzpeu>
-%    \end{macrocode}
-%
-% \subsection{EuroSans}
-% The definitions for EuroSans are essentially the same:
-%    \begin{macrocode}
-%<*uzpeus>
-\ProvidesFile{uzpeus.fd}
-     [1999/01/16 v1.2 font definitions for U/zpeus]
-\DeclareFontFamily{U}{zpeus}{}
-\DeclareFontShape{U}{zpeus}{m}{n}{<->zpeurs}{}
-\DeclareFontShape{U}{zpeus}{m}{it}{<->zpeuris}{}
-\DeclareFontShape{U}{zpeus}{bx}{n}{<->zpeubs}{}
-\DeclareFontShape{U}{zpeus}{bx}{it}{<->zpeubis}{}
-\DeclareFontShape{U}{zpeus}{b}{n}{<->ssub * zpeus/bx/n}{}
-\DeclareFontShape{U}{zpeus}{b}{it}{<->ssub * zpeus/bx/it}{}
-\DeclareFontShape{U}{zpeus}{m}{sl}{<->ssub * zpeus/m/it}{}
-\DeclareFontShape{U}{zpeus}{bx}{sl}{<->ssub * zpeus/bx/it}{}
-%</uzpeus>
-%    \end{macrocode}
-% \subsection{EuroMono}
-% And finally the definitions for EuroMono:
-%    \begin{macrocode}
-%<*uzpeut>
-\ProvidesFile{uzpeut.fd}
-     [1999/01/16 v1.2 font definitions for U/zpeut]
-\DeclareFontFamily{U}{zpeut}{}
-\DeclareFontShape{U}{zpeut}{m}{n}{<->zpeurt}{}
-\DeclareFontShape{U}{zpeut}{m}{it}{<->zpeurit}{}
-\DeclareFontShape{U}{zpeut}{bx}{n}{<->zpeubt}{}
-\DeclareFontShape{U}{zpeut}{bx}{it}{<->zpeubit}{}
-\DeclareFontShape{U}{zpeut}{b}{n}{<->ssub * zpeut/bx/n}{}
-\DeclareFontShape{U}{zpeut}{b}{it}{<->ssub * zpeut/bx/it}{}
-\DeclareFontShape{U}{zpeut}{m}{sl}{<->ssub * zpeut/m/it}{}
-\DeclareFontShape{U}{zpeut}{bx}{sl}{<->ssub * zpeut/bx/it}{}
-%<*zpeut>
-%    \end{macrocode}
diff --git a/Master/texmf-dist/source/fonts/eurofont/europs.ins b/Master/texmf-dist/source/fonts/eurofont/europs.ins
deleted file mode 100644
index b582af723c3..00000000000
--- a/Master/texmf-dist/source/fonts/eurofont/europs.ins
+++ /dev/null
@@ -1,26 +0,0 @@
-\def\batchfile{europs.ins}
-\input docstrip.tex
-\preamble
-
-Copyright 1998 Joern Clausen
-
-\endpreamble
-
-\generateFile{europs.sty}{f}{\from{europs.dtx}{style}}
-\generateFile{uzpeu.fd}{f}{\from{europs.dtx}{uzpeu}}
-\generateFile{uzpeus.fd}{f}{\from{europs.dtx}{uzpeus}}
-\generateFile{uzpeut.fd}{f}{\from{europs.dtx}{uzpeut}}
-
-\Msg{***********************************************************}
-\Msg{*}
-\Msg{* To finish the installation you have to move the following}
-\Msg{* files into a directory searched by TeX:}
-\Msg{*}
-\Msg{* \space\space europs.sty}
-\Msg{* \space\space uzpeu.fd}
-\Msg{* \space\space uzpeus.fd}
-\Msg{* \space\space uzpeut.fd}
-\Msg{*}
-\Msg{***********************************************************}
-
-\endinput
diff --git a/Master/texmf-dist/source/fonts/eurofont/install.sh b/Master/texmf-dist/source/fonts/eurofont/install.sh
deleted file mode 100644
index 875ac40381d..00000000000
--- a/Master/texmf-dist/source/fonts/eurofont/install.sh
+++ /dev/null
@@ -1,34 +0,0 @@
-#! /bin/sh
-#
-# install the ADOBE® Euro fonts and TeX support
-#
-TETEXDIR=/usr/lib/teTeX
-DVIPSDIR=$TETEXDIR/texmf/dvips/config
-TFMDIR=$TETEXDIR/texmf/fonts/tfm/adobe/eurofont
-TYPE1DIR=$TETEXDIR/texmf/fonts/type1/adobe/eurofont
-
-mkdir -p $TFMDIR
-cp -p tfm/* $TFMDIR/
-
-cp -p dvips/zpeu.map $DVIPSDIR/
-cat dvips/zpeu.map >>$DVIPSDIR/psfonts.map
-cat dvips/zpeu.map >>$DVIPSDIR/pdftex.map
-
-ncftp ftp://ftp.adobe.com/pub/adobe/type/win/all/eurofont.exe
-unzip eurofont.exe
-
-mkdir -p $TYPE1DIR
-cp -p eurofont/_1______.PFB  ${TYPE1DIR}/zpeurs.pfb
-cp -p eurofont/_1B_____.PFB  ${TYPE1DIR}/zpeubs.pfb
-cp -p eurofont/_1I_____.PFB  ${TYPE1DIR}/zpeuris.pfb
-cp -p eurofont/_1BI____.PFB  ${TYPE1DIR}/zpeubis.pfb
-cp -p eurofont/_2______.PFB  ${TYPE1DIR}/zpeurt.pfb
-cp -p eurofont/_2B_____.PFB  ${TYPE1DIR}/zpeubt.pfb
-cp -p eurofont/_2I_____.PFB  ${TYPE1DIR}/zpeurit.pfb
-cp -p eurofont/_2BI____.PFB  ${TYPE1DIR}/zpeubit.pfb
-cp -p eurofont/_3______.PFB  ${TYPE1DIR}/zpeur.pfb
-cp -p eurofont/_3B_____.PFB  ${TYPE1DIR}/zpeub.pfb
-cp -p eurofont/_3I_____.PFB  ${TYPE1DIR}/zpeuri.pfb
-cp -p eurofont/_3BI____.PFB  ${TYPE1DIR}/zpeubi.pfb
-
-texhash
diff --git a/Master/texmf-dist/source/fonts/eurofont/marvosym/fmvr8x.afm b/Master/texmf-dist/source/fonts/eurofont/marvosym/fmvr8x.afm
deleted file mode 100644
index 378d0c4a1dd..00000000000
--- a/Master/texmf-dist/source/fonts/eurofont/marvosym/fmvr8x.afm
+++ /dev/null
@@ -1,121 +0,0 @@
-StartFontMetrics 2.0
-FontName Martin_Vogels_Symbole
-Weight Regular
-Version 19980521
-IsFixedPitch false
-FullName Martin_Vogels_Symbole
-UnderlinePosition 0
-ItalicAngle 0.0
-FamilyName Martin Vogels Symbole
-Notice Freeware - All rights reserved - http://www.fh-bochum.de/fb1/vogel/marvosym.html
-UnderlineThickness 0
-FontBBox -1172 -431 3324 2056
-StartCharMetrics 106
-C 32 ; WX 556 ; N space ; B 556 0 556 0 ;
-C 33 ; WX 831 ; N exclam ; B 3 2 741 740 ;
-C 34 ; WX 978 ; N quotedbl ; B 0 -176 977 148 ;
-C 35 ; WX 978 ; N numbersign ; B 89 3 910 735 ;
-C 36 ; WX 978 ; N dollar ; B 89 -174 917 735 ;
-C 37 ; WX 978 ; N percent ; B 79 -179 899 735 ;
-C 38 ; WX 978 ; N ampersand ; B 273 2 665 725 ;
-C 39 ; WX 978 ; N quoteright ; B 320 2 711 725 ;
-C 40 ; WX 978 ; N parenleft ; B 278 0 666 731 ;
-C 41 ; WX 978 ; N parenright ; B 2 -1 973 718 ;
-C 42 ; WX 649 ; N asterisk ; B 16 2 448 484 ;
-C 43 ; WX 509 ; N plus ; B 18 66 438 480 ;
-C 46 ; WX 861 ; N period ; B 9 1 734 727 ;
-C 48 ; WX 556 ; N zero ; B 42 -12 507 719 ;
-C 49 ; WX 556 ; N one ; B 79 0 394 719 ;
-C 50 ; WX 556 ; N two ; B 25 0 506 719 ;
-C 51 ; WX 556 ; N three ; B 38 -12 513 719 ;
-C 52 ; WX 556 ; N four ; B 19 0 533 719 ;
-C 53 ; WX 556 ; N five ; B 44 -12 526 706 ;
-C 54 ; WX 556 ; N six ; B 42 -12 521 719 ;
-C 55 ; WX 556 ; N seven ; B 42 0 512 706 ;
-C 56 ; WX 556 ; N eight ; B 41 -13 511 719 ;
-C 57 ; WX 556 ; N nine ; B 32 -13 510 719 ;
-C 61 ; WX 643 ; N equal ; B 20 182 613 646 ;
-C 62 ; WX 707 ; N greater ; B 28 46 680 501 ;
-C 64 ; WX 975 ; N at ; B 30 -210 972 729 ;
-C 65 ; WX 594 ; N A ; B 0 0 566 566 ;
-C 66 ; WX 854 ; N B ; B 33 31 702 475 ;
-C 67 ; WX 1152 ; N C ; B 79 -9 1081 708 ;
-C 69 ; WX 465 ; N E ; B 0 0 382 714 ;
-C 70 ; WX 698 ; N F ; B 35 0 662 773 ;
-C 72 ; WX 727 ; N H ; B -6 -2 679 1004 ;
-C 73 ; WX 1046 ; N I ; B 0 0 996 709 ;
-C 75 ; WX 993 ; N K ; B 0 0 842 773 ;
-C 77 ; WX 814 ; N M ; B 20 -12 757 726 ;
-C 79 ; WX 521 ; N O ; B 22 59 499 543 ;
-C 80 ; WX -2 ; N P ; B -572 738 -2 925 ;
-C 81 ; WX 769 ; N Q ; B 29 63 733 486 ;
-C 82 ; WX 770 ; N R ; B 57 249 711 274 ;
-C 83 ; WX 769 ; N S ; B 22 63 727 486 ;
-C 84 ; WX 755 ; N T ; B 6 0 725 492 ;
-C 85 ; WX 659 ; N U ; B 0 -1 659 659 ;
-C 86 ; WX 521 ; N V ; B 18 -8 542 543 ;
-C 88 ; WX 521 ; N X ; B 0 -74 497 543 ;
-C 90 ; WX 933 ; N Z ; B 19 38 872 455 ;
-C 98 ; WX 851 ; N b ; B 25 3 794 565 ;
-C 99 ; WX 748 ; N c ; B 23 -21 667 732 ;
-C 100 ; WX 686 ; N d ; B 47 -17 623 613 ;
-C 101 ; WX 729 ; N e ; B 23 -6 661 693 ;
-C 102 ; WX 739 ; N f ; B 0 0 704 713 ;
-C 105 ; WX 827 ; N i ; B 9 -3 743 731 ;
-C 111 ; WX 739 ; N o ; B 19 11 695 691 ;
-C 112 ; WX 0 ; N p ; B -572 585 -2 773 ;
-C 113 ; WX 770 ; N q ; B 44 39 712 503 ;
-C 114 ; WX 770 ; N r ; B 10 190 665 216 ;
-C 115 ; WX 770 ; N s ; B 13 39 681 503 ;
-C 116 ; WX 513 ; N t ; B 0 0 488 487 ;
-C 117 ; WX 1058 ; N u ; B 1 0 1058 732 ;
-C 118 ; WX 1013 ; N v ; B 0 -3 947 723 ;
-C 134 ; WX 474 ; N dagger ; B 35 0 454 685 ;
-C 135 ; WX 673 ; N daggerdbl ; B 48 3 566 680 ;
-C 136 ; WX 475 ; N circumflex ; B 0 2 421 696 ;
-C 140 ; WX 772 ; N OE ; B 27 -70 745 739 ;
-C 150 ; WX 832 ; N endash ; B 89 263 743 397 ;
-C 151 ; WX 820 ; N emdash ; B 83 -2 737 652 ;
-C 152 ; WX 684 ; N tilde ; B 81 0 603 652 ;
-C 153 ; WX 793 ; N trademark ; B 69 -3 724 652 ;
-C 154 ; WX 801 ; N scaron ; B 74 -2 727 652 ;
-C 155 ; WX 824 ; N guilsinglright ; B 77 -21 746 647 ;
-C 156 ; WX 781 ; N oe ; B 64 -2 717 652 ;
-C 164 ; WX 824 ; N currency ; B 10 -10 748 741 ;
-C 167 ; WX 790 ; N section ; B 7 0 561 555 ;
-C 169 ; WX 615 ; N copyright ; B 19 19 574 574 ;
-C 174 ; WX 1382 ; N registered ; B 46 10 1338 770 ;
-C 192 ; WX 878 ; N Agrave ; B 67 -20 823 730 ;
-C 193 ; WX 825 ; N Aacute ; B 48 -14 763 738 ;
-C 194 ; WX 484 ; N Acircumflex ; B 53 -13 417 723 ;
-C 195 ; WX 552 ; N Atilde ; B 64 -9 501 735 ;
-C 196 ; WX 922 ; N Adieresis ; B 49 -26 886 726 ;
-C 197 ; WX 627 ; N Aring ; B 63 5 563 748 ;
-C 198 ; WX 649 ; N AE ; B 53 -22 575 729 ;
-C 199 ; WX 567 ; N Ccedilla ; B 59 -15 508 721 ;
-C 200 ; WX 691 ; N Egrave ; B 45 -14 646 729 ;
-C 201 ; WX 544 ; N Eacute ; B 30 1 514 747 ;
-C 204 ; WX 171 ; N Igrave ; B 3 3 135 740 ;
-C 205 ; WX 157 ; N Iacute ; B 6 1 120 745 ;
-C 206 ; WX 269 ; N Icircumflex ; B 1 2 255 749 ;
-C 207 ; WX 356 ; N Idieresis ; B 2 2 338 747 ;
-C 224 ; WX 947 ; N agrave ; B 37 0 892 745 ;
-C 225 ; WX 612 ; N aacute ; B 43 -14 560 725 ;
-C 226 ; WX 712 ; N acircumflex ; B 49 0 663 743 ;
-C 227 ; WX 952 ; N atilde ; B 51 -12 906 740 ;
-C 228 ; WX 807 ; N adieresis ; B 34 -8 767 747 ;
-C 229 ; WX 865 ; N aring ; B 36 0 823 745 ;
-C 230 ; WX 709 ; N ae ; B 61 -14 679 729 ;
-C 231 ; WX 1070 ; N ccedilla ; B 45 -38 1017 731 ;
-C 232 ; WX 748 ; N egrave ; B 34 -14 713 729 ;
-C 233 ; WX 835 ; N eacute ; B 53 -22 782 729 ;
-C 234 ; WX 959 ; N ecircumflex ; B 58 -16 894 728 ;
-C 235 ; WX 620 ; N edieresis ; B 28 -14 578 729 ;
-C 240 ; WX 722 ; N eth ; B 0 0 718 716 ;
-C 241 ; WX 611 ; N ntilde ; B 68 -197 574 530 ;
-C 247 ; WX 411 ; N divide ; B 295 306 391 400 ;
-C 253 ; WX 1726 ; N yacute ; B 3 0 1623 692 ;
-C 254 ; WX 1005 ; N thorn ; B 17 8 939 858 ;
-C 255 ; WX 1110 ; N UNKN ; B 46 -199 561 796 ;
-EndCharMetrics
-EndFontMetrics
diff --git a/Master/texmf-dist/source/fonts/eurofont/marvosym/mvrit.tex b/Master/texmf-dist/source/fonts/eurofont/marvosym/mvrit.tex
deleted file mode 100644
index 35a956c3028..00000000000
--- a/Master/texmf-dist/source/fonts/eurofont/marvosym/mvrit.tex
+++ /dev/null
@@ -1,34 +0,0 @@
-%&Plain
-% File mvrit.tex
-% Copyright 1998 Rowland McDonnell although I don't know why I bother
-%
-% This is the file used to create the faked italic version of the 
-% Marvosym metrics.
-%
-% It requires fontinst, currently (October 1998) available from CTAN:
-%
-% fonts/utilities/fontinst/
-%
-%
-\input fontinst.sty
-
-\installfonts
-\afmtomtx{fmvr8x}{fmvr8x}
-\mtxtopl{fmvr8x}{fmvr8x}
-
-%fudge italic from roman
-\transformfont{fmvri8x}{\slantfont{167}{\fromafm{fmvr8x}}}
-
-\endinstallfonts
-
-\bye
-
-\endinput
-
-Notes:
-
-The file fmvr8x.afm is the original marvosym.afm file re-named.
-
-fmvri8x.tfm was created from fmvr8x.afm using fontinst and pltotf.
-
-fmvr8x.tfm is the original fmvr8x.tfm.
\ No newline at end of file
diff --git a/Master/texmf-dist/source/fonts/eurofont/marvosym/tfmfiles/original/fmvr8x.tfm b/Master/texmf-dist/source/fonts/eurofont/marvosym/tfmfiles/original/fmvr8x.tfm
deleted file mode 100644
index 114800be1a8..00000000000
--- a/Master/texmf-dist/source/fonts/eurofont/marvosym/tfmfiles/original/fmvr8x.tfm
+++ /dev/null
diff --git a/Master/texmf-dist/source/fonts/eurofont/marvosym/tfmfiles/original/fmvri8x.tfm b/Master/texmf-dist/source/fonts/eurofont/marvosym/tfmfiles/original/fmvri8x.tfm
deleted file mode 100644
index 90f48e99e6b..00000000000
--- a/Master/texmf-dist/source/fonts/eurofont/marvosym/tfmfiles/original/fmvri8x.tfm
+++ /dev/null
diff --git a/Master/texmf-dist/source/fonts/eurofont/marvosym/tfmfiles/yandy/fmvr8x.tfm b/Master/texmf-dist/source/fonts/eurofont/marvosym/tfmfiles/yandy/fmvr8x.tfm
deleted file mode 100644
index ce403fb48c3..00000000000
--- a/Master/texmf-dist/source/fonts/eurofont/marvosym/tfmfiles/yandy/fmvr8x.tfm
+++ /dev/null
diff --git a/Master/texmf-dist/source/fonts/eurofont/marvosym/tfmfiles/yandy/fmvri8x.tfm b/Master/texmf-dist/source/fonts/eurofont/marvosym/tfmfiles/yandy/fmvri8x.tfm
deleted file mode 100644
index a4a036aab81..00000000000
--- a/Master/texmf-dist/source/fonts/eurofont/marvosym/tfmfiles/yandy/fmvri8x.tfm
+++ /dev/null
diff --git a/Master/texmf-dist/tex/latex/eurofont/eurofont.cfg b/Master/texmf-dist/tex/latex/eurofont/eurofont.cfg
deleted file mode 100644
index 563f057dcdb..00000000000
--- a/Master/texmf-dist/tex/latex/eurofont/eurofont.cfg
+++ /dev/null
@@ -1,45 +0,0 @@
-%% LaTeX2e file `eurofont.cfg'
-%% generated by the `filecontents' environment
-%% from source `eurofont' on 1999/02/02.
-%%
-% Configuration file for the eurofont package
-% Copyright 1998 Rowland McDonnell
-% email rebecca@astrid.u-net.com
-%
-% Please do change this file as much as you like, but don't distribute
-% modified versions.
-%
-% If you change this file, do make sure that you change the date,
-% version number, and identification note below:
-%
-\ProvidesFile{eurofont.cfg}[1998/11/03 v1.0 Default config file for
-the eurofont package]
-%
-% List contents                                Corresponding command
-%
-\EFaddtolist{\userlist}{}%                     \makeusereuro
-\EFaddtolist{\texteurolist}{}%                 \maketexteuro
-\EFaddtolist{\chinaelist}{}%                   \makechinaeeuro
-\EFaddtolist{\cmlist}{cmr,cmss,cmtt}%          \makecmeuro
-\EFaddtolist{\seriflist}{pbk,pnc,ppl,ptm,put}% \makeserifeuro
-\EFaddtolist{\sanslist}{pag,phv,psy,pzd}%      \makesanseuro
-\EFaddtolist{\monolist}{pcr}%                  \makemonoeuro
-\EFaddtolist{\fakemediumlist}{pzc}%            \makefakemediumeuro
-\EFaddtolist{\fakelightlist}{}%                \makefakelighteuro
-\EFaddtolist{\fakeheavylist}{}%                \makefakeheavyeuro
-%
-\EFaddtolist{\faketexteurolist}{}
-%
-% Put all the standard LaTeX weights (and likely extras)
-% into one of the following lists:
-%
-\EFaddtolist{\EFlightserieslist}{ul,el,l,ulc,elc,lc,ulx,elx,lx}
-\EFaddtolist{\EFmediumserieslist}{m,mb,db,sb,mc,mbc,dbc,sbc,mx,mbx,dbx,sbx}
-\EFaddtolist{\EFboldserieslist}{b,bx,bc}
-\EFaddtolist{\EFultraboldserieslist}{eb,ub,ebc,ubc,ebx,ubx}
-%
-% And two non-standard weights:
-%
-\EFaddtolist{\EFultraboldserieslist}{xb,ebd}
-%
-\endinput
diff --git a/Master/texmf-dist/tex/latex/eurofont/eurofont.sty b/Master/texmf-dist/tex/latex/eurofont/eurofont.sty
deleted file mode 100644
index ea9c108f1e9..00000000000
--- a/Master/texmf-dist/tex/latex/eurofont/eurofont.sty
+++ /dev/null
@@ -1,562 +0,0 @@
-%%
-%% This is file `eurofont.sty',
-%% generated with the docstrip utility.
-%%
-%% The original source files were:
-%%
-%% eurofont.dtx  (with options: `package')
-%% 
-%% IMPORTANT NOTICE:
-%% 
-%% For the copyright see the source file.
-%% 
-%% Any modified versions of this file must be renamed
-%% with new filenames distinct from eurofont.sty.
-%% 
-%% For distribution of the original source see the terms
-%% for copying and modification in the file eurofont.dtx.
-%% 
-%% This generated file may be distributed as long as the
-%% original source files, as listed above, are part of the
-%% same distribution. (The sources need not necessarily be
-%% in the same archive or directory.)
-%%\iffalse
-%% File eurofont.sty
-%% copyright Rowland McDonnell 1998
-%% email rebecca@astrid.u-net.com
-%%\This file is part of the eurofont distribution.  You can distribute it
-%% freely provided that you include the rest of the eurofont distribution
-%% with this file and make no more than a nominal charge to cover the
-%% costs of distributing it.
-%%
-%% If you would like to change the contents of this file, please make a
-%% copy of it under a different name and change that instead. Keep my
-%% copyright notice attached, but make it clear that the new file is your
-%% responsibility so you get the credit for the improvements and I don't
-%% get blamed for the bugs.
-%% \CheckSum{1267}
-%% \CharacterTable
-%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
-%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
-%%   Digits        \0\1\2\3\4\5\6\7\8\9
-%%   Exclamation   \!     Double quote  \"     Hash (number) \#
-%%   Dollar        \$     Percent       \%     Ampersand     \&
-%%   Acute accent  \'     Left paren    \(     Right paren   \)
-%%   Asterisk      \*     Plus          \+     Comma         \,
-%%   Minus         \-     Point         \.     Solidus       \/
-%%   Colon         \:     Semicolon     \;     Less than     \<
-%%   Equals        \=     Greater than  \>     Question mark \?
-%%   Commercial at \@     Left bracket  \[     Backslash     \\
-%%   Right bracket \]     Circumflex    \^     Underscore    \_
-%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
-%%   Right brace   \}     Tilde         \~}
-%%
-%%    List contents                                Corresponding command
-%%
-%%
-%%    List contents                                Corresponding command
-%%
-%% Put all the standard LaTeX weights (and likely extras)
-%% into one of the following lists:
-\NeedsTeXFormat{LaTeX2e}[1998/06/01]
-\ProvidesPackage{eurofont}[1999/01/30 v1.1.3 A package for using euro
-symbols]
-\def\userlist{}
-\def\texteurolist{}
-\def\chinaelist{}
-\def\cmlist{}
-\def\seriflist{}
-\def\sanslist{}
-\def\monolist{}
-\def\fakemediumlist{}
-\def\fakelightlist{}
-\def\fakeheavylist{}
-\def\faketexteurolist{}
-\def\EFlightserieslist{}
-\def\EFmediumserieslist{}
-\def\EFboldserieslist{}
-\def\EFultraboldserieslist{}
-\newif\ifEF@debugreport
-\EF@debugreportfalse% Debugging reports off by default
-\def\EF@debugrep#1{\ifEF@debugreport\typeout{eurofont: #1}\fi}
-\newif\ifEF@listed
-\def\EF@checkiflisted#1#2{% check if element #1 is in list #2
-\EF@listedfalse%
-\edef\thiselem{#1}% changed to edef from def RJMM 1/9/98
-\let\@@elt\@elt% Save \@elt (in case this command is executed
-\def\@elt##1{\def\testelem{##1}%
-\ifx\thiselem\testelem\EF@listedtrue\fi}%
-#2\let\@elt\@@elt}% execute list and restore \@elt
-\newcommand{\EFaddtolist}[2]{% #1 = list name;
-\EF@addtolist#2,:#1\end}
-\def\EF@addtolist#1,#2:#3\end{% #3 is the list now
-\def\@tempcmda{#2}%
-\ifx\@tempcmda\@empty%
-   \EF@debugrep{Last elem: #1}\relax% if #2 is empty, do this.
-    \EF@addMember{#1}{#3}%            if #2 is empty, do this
-    \else
-     \EF@debugrep{elem: #1}\relax% if #2 is not empty, do this
-      \EF@addMember{#1}{#3}%       if #2 is not empty, do this
-      \EF@addtolist#2:#3\end\fi}%  if #2 is not empty, do this
-\newcommand{\EF@addMember}[2]{%
-    %%% add #1 only if it isn't yet in the list
-    %%% it surely would be more efficient without the check...
-    {\EF@checkiflisted{#1}{#2}\relax% to suppress space
-    \ifEF@listed
-    \EF@debugrep{#1 already in the list}\relax%
-    \else
-    \EF@debugrep{adding #1 to \string #2}\relax%
-    \EF@rightappenditem{#1}{#2}\fi}}
-\newtoks\EF@tokb% token list register for temp use
-\newcommand{\EF@rightappenditem}[2]%
-{\@temptokena={\@elt{#1}}\EF@tokb=\expandafter{#2}%
-\xdef#2{\the\EF@tokb\the\@temptokena}}% change the list globally
-\newif\ifEF@marvosym\EF@marvosymfalse% Adobe Eurofonts by default
-\newif\ifEF@eurosym\EF@eurosymfalse%   Don't use eurosym by default
-\newif\ifEF@textcomp\EF@textcomptrue% Load the textcomp package if
-\newif\ifEF@fixtieaccent\EF@fixtieaccentfalse% Don't re-define tie
-\DeclareOption{marvosym}      {\EF@marvosymtrue}
-\DeclareOption{adobeeurofonts}{\EF@marvosymfalse}
-\DeclareOption{eurosym}  {\EF@eurosymtrue}
-\DeclareOption{noeurosym}{\EF@eurosymfalse}
-\DeclareOption{debugreport}{\EF@debugreporttrue}
-\DeclareOption{nodebugreport}{\EF@debugreportfalse}
-\DeclareOption{notextcomp}{\EF@textcompfalse}
-\DeclareOption{textcomp}{\EF@textcomptrue}
-\DeclareOption{fixtieaccent}{\EF@fixtieaccenttrue}
-\DeclareOption{nofixtieaccent}{\EF@fixtieaccentfalse}
-\newcommand*{\fakelighteuro}[1][0ex]{\def\EF@tmprlift{#1}\@fakelighteuro}
-\newcommand*{\fakemediumeuro}[1][0ex]{\def\EF@tmprlift{#1}\@fakemediumeuro}
-\newcommand*{\fakeheavyeuro}[1][0ex]{\def\EF@tmprlift{#1}\@fakeheavyeuro}
-\DeclareOption{noslantfakeeuro} {%
-    \def\EF@fakeslant{0}% in case anyone's interested
-    \newcommand*{\@fakemediumeuro}[1][100]
-                {\mediumruleeuronoslant{\EF@tmprlift}{#1}}
-    \newcommand*{\@fakelighteuro}[1][100]
-                {\lightruleeuronoslant{\EF@tmprlift}{#1}}
-    \newcommand*{\@fakeheavyeuro}[1][100]
-                {\heavyruleeuronoslant{\EF@tmprlift}{#1}}}
-\DeclareOption{normalslantfakeeuro} {%
-    \def\EF@fakeslant{1}% in case anyone's interested
-    \newcommand*{\@fakemediumeuro}[1][100]
-                {\mediumruleeuronorm{\EF@tmprlift}{#1}}
-    \newcommand*{\@fakelighteuro}[1][100]
-                {\lightruleeuronorm{\EF@tmprlift}{#1}}
-    \newcommand*{\@fakeheavyeuro}[1][100]
-                {\heavyruleeuronorm{\EF@tmprlift}{#1}}}
-\DeclareOption{bigslantfakeeuro} {%
-    \def\EF@fakeslant{2}% in case anyone's interested
-    \newcommand*{\@fakemediumeuro}[1][100]
-                {\mediumruleeurobigslant{\EF@tmprlift}{#1}}
-    \newcommand*{\@fakelighteuro}[1][100]
-                {\lightruleeurobigslant{\EF@tmprlift}{#1}}
-    \newcommand*{\@fakeheavyeuro}[1][100]
-                {\heavyruleeurobigslant{\EF@tmprlift}{#1}}}
-\DeclareOption{left}{\PassOptionsToPackage{left}{eurosym}%
-\DeclareRobustCommand{\euros}[1]{\euro\nobreak\,#1}}
-\DeclareOption{right}{\PassOptionsToPackage{right}{eurosym}%
-\DeclareRobustCommand{\euros}[1]{#1\nobreak\,\euro}}
-\DeclareOption{official}{\PassOptionsToPackage{official}{eurosym}}
-\DeclareOption{gen}{\PassOptionsToPackage{gen}{eurosym}}
-\DeclareOption{gennarrow}{\PassOptionsToPackage{gennarrow}{eurosym}}
-\DeclareOption{genwide}{\PassOptionsToPackage{genwide}{eurosym}}
-\ExecuteOptions{adobeeurofonts}% Use Adobe's Eurofonts by default
-\ExecuteOptions{noeurosym}%      Don't use eurosym by default
-\ExecuteOptions{left}%           Euro symbol on left by default
-\ExecuteOptions{normalslantfakeeuro}% Fake euros with slight slant by default
-\ExecuteOptions{nodebugreport}%  No debugging reports by default
-\ExecuteOptions{textcomp}%  Load the textcomp package by default
-\ExecuteOptions{nofixtieaccent}%  Don't re-define the tie accent by
-\InputIfFileExists{eurofont.cfg}{}%
-{\PackageWarningNoLine{eurofont}%
-{I can't find the eurofont.cfg configuration file.\MessageBreak
-Perhaps something is wrong with this installation?\MessageBreak
-The \protect\euro\space command will work with default settings}%
-\EFaddtolist{\userlist}{}
-\EFaddtolist{\texteurolist}{}
-\EFaddtolist{\chinaelist}{}
-\EFaddtolist{\cmlist}{cmr,cmss,cmtt}
-\EFaddtolist{\seriflist}{pbk,pnc,ppl,ptm,put}
-\EFaddtolist{\sanslist}{pag,phv,psy,pzd}
-\EFaddtolist{\monolist}{pcr}
-\EFaddtolist{\fakemediumlist}{pzc}
-\EFaddtolist{\fakelightlist}{}
-\EFaddtolist{\fakeheavylist}{}
-\EFaddtolist{\faketexteurolist}{}
-\EFaddtolist{\EFlightserieslist}{ul,el,l,ulc,elc,lc,ulx,elx,lx}
-\EFaddtolist{\EFmediumserieslist}{m,mb,db,sb,mc,mbc,dbc,sbc,mx,mbx,dbx,sbx}
-\EFaddtolist{\EFboldserieslist}{b,bx,bc}
-\EFaddtolist{\EFultraboldserieslist}{eb,ub,ebc,ubc,ebx,ubx}%
-\EFaddtolist{\EFultraboldserieslist}{xb,ebd}
-}
-\ProcessOptions
-\ifEF@textcomp\IfFileExists{textcomp.sty}{\RequirePackage{textcomp}}{}\fi
-\ifEF@fixtieaccent \DeclareTextAccentDefault{\t}{OML}\fi
-\ifEF@eurosym%
-\def\euro{\makefakeeuro}
-\IfFileExists{eurosym.sty}{\RequirePackage{eurosym}}{%
-\PackageError{eurofont}{I can't find the eurosym package}%
-{You've used the eurosym option; this requires the eurosym package
-which doesn't appear to be installed}}%
-\let\ESeuro\euro
-\fi
-\newcommand{\showfontfamily}{
-\typeout{**********************************}
-\typeout{* \protect\showfontfamily:
-      \space\space\space\space\space\space
-      \space\space\space\space\space\space
-      \space\space\space*}
-\typeout{*\space\space\space\space\space\space
-          \space\space\space\space\space\space
-      \space\space\space\space\space\space
-      \space\space\space\space\space\space
-      \space\space\space\space\space\space
-      \space\space\space*}
-\typeout{* The current font family is: \f@family\space *}
-\typeout{*\space\space\space\space\space\space
-          \space\space\space\space\space\space
-      \space\space\space\space\space\space
-      \space\space\space\space\space\space
-      \space\space\space\space\space\space
-      \space\space\space*}
-\typeout{***********************************}
-}
-\def\EF@crossstrokes#1#2#3#4#5#6#7#8#9{%
-\@ifundefined{EF@slantcorr}{\def\EF@slantcorr{100}}{}%
-\@tempdima=#8%
-\@tempdima=\fontdimen1\font%
-\@tempdima=0.1\@tempdima%
-\@tempdima=\EF@slantcorr\@tempdima%
-\@tempdima=0.1\@tempdima%
-\edef\@tempcmda{\strip@pt\@tempdima}%
-\@tempdima=#2% Changed from width #1 to height #2
-\@tempdima=\@tempcmda\@tempdima%
-\@tempdima=0.5\@tempdima%
-\edef\EF@slantC{\the\@tempdima}%
-\@tempdimb=#8% centre line spacing of rules
-\@tempdimb=\@tempcmda\@tempdimb%
-\@tempdimb=0.5\@tempdimb%
-\edef\EF@rulehoffset{\the\@tempdimb}%
-\@tempdima=#1%             \
-\@tempdima=0.01\@tempdima%  \
-\@tempdima=#4\@tempdima%     } move back to add cross-strokes
-\kern-\@tempdima%           /
-\kern\EF@slantC%           /  Slant correction forward for italic
-\@tempdima=#2%                      \
-\advance\@tempdima by-#3%            \
-\advance\@tempdima by-#8%             \ calc lift of cross-strokes
-\advance\@tempdima by-#7%             /
-\@tempdima=0.5\@tempdima%            /
-\advance\@tempdima by#9%            /
-\@tempdimc=#8%             \ calc cross-stroke spacing
-\advance\@tempdimc by-#7%  /
-\raisebox{\@tempdima}{%
-\vbox{%                             \
-\@tempdimb=#1%                \      \
-\@tempdimb=0.01\@tempdimb%     } calc width of cross-stroke
-\@tempdimb=#5\@tempdimb%      /        \
-\hbox{\kern\EF@rulehoffset%             \ top rule
-\vbox{\hrule width\@tempdimb height#7}}% \
-\nointerlineskip%                         } draw cross-strokes
-\vskip\@tempdimc%                        / (using \@tempdima/b/c from above)
-\@tempdimb=#1%                \         /
-\@tempdimb=0.01\@tempdimb%     } calc width of cross-stroke
-\@tempdimb=#6\@tempdimb%      /       /
-\hbox{\kern-\EF@rulehoffset%         /
-\vbox{\hrule width\@tempdimb height#7}}}}%  bottom rule
-\@tempcnta=#4%                   \
-\advance\@tempcnta by-#5%  (aha!) \
-\@tempdima=#1%                     \
-\@tempdima=0.01\@tempdima%          \ move forward to end of C
-\@tempdima=\@tempcnta\@tempdima%    /
-\kern\@tempdima%                   /
-\kern-\EF@slantC%                /   slant correction
-}
-\providecommand\EF@fakeeurobase{C}
-\def\EFruleeuro#1#2#3#4#5#6#7{{% Confine defs to \EFruleeuro
-\settowidth{\@tempdima}{\EF@fakeeurobase}%
-\settoheight{\@tempdimb}{\EF@fakeeurobase}%
-\settodepth{\@tempdimc}{\EF@fakeeurobase}%
-\edef\EF@Cwidth{\the\@tempdima}%
-\edef\EF@Cheight{\the\@tempdimb}%
-\edef\EF@Cdepth{\the\@tempdimc}%
-\advance\@tempdimb by\@tempdimc%
-\def\EF@slantcorr{#7}%
-\ifx\EF@slantcorr\@empty\def\EF@slantcorr{100}\fi%
-\def\EF@backshift{#1}% percentage of \EF@Cwidth that back shift is
-\@tempdimb=0.01\@tempdima%          swapped these two lines;
-\@tempdimb=\EF@backshift\@tempdimb% dimen can get too big otherwise
-\ifdim\@tempdimb>\@tempdima\@tempdima=\@tempdimb\fi%
-\makebox[\@tempdima][r]%
-{\EF@fakeeurobase\EF@crossstrokes{\EF@Cwidth}{\EF@Cheight}{\EF@Cdepth}%
-                                 {\EF@backshift}{#2}{#3}{#4}{#5}{#6}}%
-}}
-\def\SelectOnWeight#1#2#3#4{%
-\EF@checkiflisted{\f@series}{\EFlightserieslist}%
-\ifEF@listed\EF@debugrep{SelectOnWeight light}#1%
-\else
-\EF@checkiflisted{\f@series}{\EFmediumserieslist}%
-\ifEF@listed\EF@debugrep{SelectOnWeight medium}#2%
-\else
-\EF@checkiflisted{\f@series}{\EFboldserieslist}%
-\ifEF@listed\EF@debugrep{SelectOnWeight bold}#3%
-\else
-\EF@checkiflisted{\f@series}{\EFultraboldserieslist}%
-\ifEF@listed\EF@debugrep{SelectOnWeight ultrabold}#4%
-\else\EF@debugrep{SelectOnWeight default to medium}%
-#2%
-\fi\fi\fi\fi}
-\providecommand*{\mediumruleeuronorm}[2]{\EF@debugrep{medium rule euro norm}%
-\SelectOnWeight%
-{\EFruleeuro{110}{80}{72}{0.04ex}{0.27ex}{#1}{#2}}% light
-{\EFruleeuro{110}{80}{72}{0.07ex}{0.27ex}{#1}{#2}}% medium
-{\EFruleeuro{110}{80}{72}{0.14ex}{0.27ex}{#1}{#2}}% bold
-{\EFruleeuro{110}{80}{72}{0.18ex}{0.27ex}{#1}{#2}}% ultra bold - new numbers
-}
-\providecommand*{\mediumruleeuronoslant}[2]{\EF@debugrep{medium rule euro noslant}%
-\SelectOnWeight%
-{\EFruleeuro{110}{80}{80}{0.04ex}{0.27ex}{#1}{#2}}% light
-{\EFruleeuro{110}{80}{80}{0.07ex}{0.27ex}{#1}{#2}}% medium
-{\EFruleeuro{110}{80}{80}{0.14ex}{0.27ex}{#1}{#2}}% bold
-{\EFruleeuro{110}{80}{80}{0.18ex}{0.27ex}{#1}{#2}}% ultra bold
-}
-\providecommand*{\mediumruleeurobigslant}[2]{\EF@debugrep{medium rule euro bigslant}%
-\SelectOnWeight%
-{\EFruleeuro{110}{80}{60}{0.04ex}{0.27ex}{#1}{#2}}% light
-{\EFruleeuro{110}{80}{60}{0.07ex}{0.27ex}{#1}{#2}}% medium
-{\EFruleeuro{110}{80}{60}{0.14ex}{0.27ex}{#1}{#2}}% bold
-{\EFruleeuro{110}{80}{60}{0.18ex}{0.27ex}{#1}{#2}}% ultra bold
-}
-\providecommand*{\lightruleeuronorm}[2]{\EF@debugrep{light rule euro norm}%
-\SelectOnWeight%
-{\EFruleeuro{110}{80}{72}{0.02ex}{0.27ex}{#1}{#2}}% light
-{\EFruleeuro{110}{80}{72}{0.04ex}{0.27ex}{#1}{#2}}% medium
-{\EFruleeuro{110}{80}{72}{0.07ex}{0.27ex}{#1}{#2}}% bold
-{\EFruleeuro{110}{80}{72}{0.14ex}{0.27ex}{#1}{#2}}% ultra bold
-}
-\providecommand*{\lightruleeuronoslant}[2]{\EF@debugrep{light rule euro noslant}%
-\SelectOnWeight%
-{\EFruleeuro{110}{80}{80}{0.02ex}{0.27ex}{#1}{#2}}% light
-{\EFruleeuro{110}{80}{80}{0.04ex}{0.27ex}{#1}{#2}}% medium
-{\EFruleeuro{110}{80}{80}{0.07ex}{0.27ex}{#1}{#2}}% bold
-{\EFruleeuro{110}{80}{80}{0.14ex}{0.27ex}{#1}{#2}}% ultra bold
-}
-\providecommand*{\lightruleeurobigslant}[2]{\EF@debugrep{light rule euro bigslant}%
-\SelectOnWeight%
-{\EFruleeuro{110}{80}{60}{0.02ex}{0.27ex}{#1}{#2}}% light
-{\EFruleeuro{110}{80}{60}{0.04ex}{0.27ex}{#1}{#2}}% medium
-{\EFruleeuro{110}{80}{60}{0.07ex}{0.27ex}{#1}{#2}}% bold
-{\EFruleeuro{110}{80}{60}{0.14ex}{0.27ex}{#1}{#2}}% ultra bold
-}
-\providecommand*{\heavyruleeuronorm}[2]{\EF@debugrep{heavy rule euro norm}%
-\SelectOnWeight%
-{\EFruleeuro{110}{80}{72}{0.14ex}{0.27ex}{#1}{#2}}% light
-{\EFruleeuro{110}{80}{72}{0.18ex}{0.27ex}{#1}{#2}}% medium
-{\EFruleeuro{110}{80}{72}{0.22ex}{0.30ex}{#1}{#2}}% bold
-{\EFruleeuro{110}{80}{72}{0.26ex}{0.33ex}{#1}{#2}}% ultra bold
-}
-\providecommand*{\heavyruleeuronoslant}[2]{\EF@debugrep{heavy rule euro noslant}%
-\SelectOnWeight%
-{\EFruleeuro{110}{80}{80}{0.14ex}{0.27ex}{#1}{#2}}% light
-{\EFruleeuro{110}{80}{80}{0.18ex}{0.27ex}{#1}{#2}}% medium
-{\EFruleeuro{110}{80}{80}{0.22ex}{0.30ex}{#1}{#2}}% bold
-{\EFruleeuro{110}{80}{80}{0.26ex}{0.33ex}{#1}{#2}}% ultra bold
-}
-\providecommand*{\heavyruleeurobigslant}[2]{\EF@debugrep{heavy rule euro bigslant}%
-\SelectOnWeight%
-{\EFruleeuro{110}{80}{60}{0.14ex}{0.27ex}{#1}{#2}}% light
-{\EFruleeuro{110}{80}{60}{0.18ex}{0.27ex}{#1}{#2}}% medium
-{\EFruleeuro{110}{80}{60}{0.22ex}{0.30ex}{#1}{#2}}% bold
-{\EFruleeuro{110}{80}{60}{0.26ex}{0.33ex}{#1}{#2}}% ultra bold
-}
-\def\EF@mvs{\fontencoding{U}\fontfamily{zmvs}\fontseries{m}\selectfont}
-\providecommand{\marvosymeuro}[1]{%
-\EF@debugrep{marvosymeuro}%
-\SelectOnWeight%
-{\EF@mvs\char#1}% light
-{\EF@mvs\char#1}% medium
-{\mbox{\EF@pmsb{\EF@mvs\char#1}}}% bold
-{\mbox{\EF@pmsb{\EF@mvs\char#1}}}% ultra bold
-}
-\providecommand
- {\marvosymserifeuro}{\EF@debugrep{marvosymserifeuro}\marvosymeuro{101}}
-\providecommand
- {\marvosymsanseuro}{\EF@debugrep{marvosymsanseuro}\marvosymeuro{99}}
-\providecommand
- {\marvosymmonoeuro}{\EF@debugrep{marvosymmonoeuro}\marvosymeuro{100}}
-\newlength{\EF@pmbshift}
-\newcommand{\EF@pmsb}[1]{%
-\EF@debugrep{EF@pmsb}%
-\EF@pmbshift=0.020em% as was
-\hbox{%
-\rlap{#1}%
-\kern0.5\EF@pmbshift%
-\raisebox{0.50\EF@pmbshift}[0pt][0pt]{\rlap{#1}}%
-\raisebox{-0.50\EF@pmbshift}[0pt][0pt]{\rlap{#1}}%
-\kern1\EF@pmbshift%
-\raisebox{0.50\EF@pmbshift}[0pt][0pt]{\rlap{#1}}%
-\raisebox{-0.50\EF@pmbshift}[0pt][0pt]{\rlap{#1}}%
-\kern0.5\EF@pmbshift%
-#1}}
-\newcommand{\EF@pmb}[1]{%
-\EF@debugrep{EF@pmb}%
-\EF@pmbshift=0.020em% as was
-\hbox{%
-\rlap{#1}%
-\kern0.5\EF@pmbshift%
-\raisebox{0.866\EF@pmbshift}[0pt][0pt]{\rlap{#1}}%
-\raisebox{-0.866\EF@pmbshift}[0pt][0pt]{\rlap{#1}}%
-\kern1\EF@pmbshift%
-\raisebox{0.866\EF@pmbshift}[0pt][0pt]{\rlap{#1}}%
-\raisebox{-0.866\EF@pmbshift}[0pt][0pt]{\rlap{#1}}%
-\kern0.5\EF@pmbshift%
-#1}}
-\def\EFiftexteuroexists#1#2{%
-\EF@checkiflisted{\f@family}{\faketexteurolist}%
-\ifEF@listed#2%
-\else
-\ifx\texteuro\@undefined#2% if \texteuro doesn't exist, #2 and finish
-\else%
-\IfFileExists{ts1\f@family.fd}%
-{#1}% if ts1<fam>.fd exists, #1.  Can't usefully test for glyph existing
-{#2}% if ts1<fam>.fd doesn't exist, #2 and finish
-\fi\fi}
-\providecommand{\zpeutteuro}{\EF@debugrep{zpeutteuro}%
-{\fontencoding{U}\fontfamily{zpeutt}\selectfont e}}
-\providecommand{\zpeureuro}{\EF@debugrep{zpeureuro}%
-{\fontencoding{U}\fontfamily{zpeur}\selectfont e}}
-\providecommand{\zpeusseuro}{\EF@debugrep{zpeusseuro}%
-{\fontencoding{U}\fontfamily{zpeuss}\selectfont e}}
-\ifEF@marvosym
-\providecommand{\monoeuro}{\EF@debugrep{monoeuro}{\marvosymmonoeuro}}
-\providecommand{\serifeuro}{\EF@debugrep{serifeuro}{\marvosymserifeuro}}
-\providecommand{\sanseuro}{\EF@debugrep{sanseuro}{\marvosymsanseuro}}
-\else
-\providecommand{\monoeuro}{\EF@debugrep{monoeuro}\zpeutteuro}
-\providecommand{\serifeuro}{\EF@debugrep{serifeuro}\zpeureuro}
-\providecommand{\sanseuro}{\EF@debugrep{sanseuro}\zpeusseuro}
-\fi
-\providecommand{\makeusereuro}
-               {\EF@debugrep{makeusereuro}\makefakemediumeuro%
-\PackageWarningNoLine{eurofont}{%
-You have tried to use the \protect\makeusereuro\space command
-to\MessageBreak print a euro symbol, but you have not defined
-the\MessageBreak \protect\makeusereuro\space command. This has
-probably happened in\MessageBreak the \protect\euro\space command. I
-shall print a faked euro symbol\MessageBreak for now}}
-\DeclareFontFamily{OT1}{chin}{}
-\DeclareFontShape{OT1}{chin}{m}{n}{<-> china10}{}
-\providecommand{\chinaeeuro}{%
-\IfFileExists{china2e.sty}%
-{\EF@debugrep{chinaeeuro}%
-\SelectOnWeight%
-{{\usefont{OT1}{chin}{m}{n}\char255}}% light
-{{\usefont{OT1}{chin}{m}{n}\char255}}% medium
-{\mbox{\EF@pmb{\usefont{OT1}{chin}{m}{n}\char255}}}% bold
-{\mbox{\EF@pmb{\usefont{OT1}{chin}{m}{n}\char255}}}% ultra bold
-}%
-{\EF@debugrep{chinaeeuro - we have a problem}%
-\PackageWarning{eurofont}{%
-The \protect\euro\space command
-is trying to print a euro symbol\MessageBreak
-from the China2e fount, but I can't find the file\MessageBreak
-china2e.sty.\MessageBreak\MessageBreak
-I'm assuming that you've not got the China2e font\MessageBreak
-installed, so I'm printing a faked euro instead\MessageBreak}%
-\makefakeeuro}}
-\providecommand{\cmrfakeeuro}{%
-\EF@debugrep{\protect\cmrfakeeuro}\fakelighteuro}
-\providecommand{\cmssfakeeuro}{%
-\EF@debugrep{\protect\cmssfakeeuro}\fakemediumeuro}
-\providecommand{\cmttfakeeuro}{%
-\EF@debugrep{\protect\cmttfakeeuro}\fakemediumeuro}
-\providecommand{\makefakemediumeuro}{\EF@debugrep{makefakemediumeuro}%
-\@ifundefined{\f@family fakeeuro}{\fakemediumeuro}%
-{\csname\f@family fakeeuro\endcsname}}
-\providecommand{\makefakelighteuro}{\EF@debugrep{makefakelighteuro}%
-\@ifundefined{\f@family fakeeuro}{\fakelighteuro}%
-{\csname\f@family fakeeuro\endcsname}}
-\providecommand{\makefakeheavyeuro}{\EF@debugrep{makefakeheavyeuro}%
-\@ifundefined{\f@family fakeeuro}{\fakeheavyeuro}%
-{\csname\f@family fakeeuro\endcsname}}
-\providecommand{\makefakeeuro}{\EF@debugrep{makefakeeuro}%
-\@ifundefined{\f@family fakeeuro}{%
-\EF@checkiflisted{\f@family}{\fakelightlist}\relax
-  \ifEF@listed \makefakelighteuro
-    \else
-    \EF@checkiflisted{\f@family}{\fakemediumlist}\relax
-    \ifEF@listed \makefakemediumeuro
-      \else
-      \EF@checkiflisted{\f@family}{\fakeheavylist}\relax
-      \ifEF@listed \makefakeheavyeuro
-        \else%                If <fam>'s not listed,
-        \makefakemediumeuro%  print medium faked euro
-        \fi \fi \fi
-}%
-{\csname\f@family fakeeuro\endcsname}}
-\providecommand{\pzcfakeeuro}{\EF@debugrep{pzcfakeeuro}%
-\fakemediumeuro[-0.1ex]}
-\providecommand{\maketexteuro}{\EF@debugrep{maketexteuro}%
-\EFiftexteuroexists{\texteuro}{\makefakeeuro}}
-\providecommand{\cmeuro}{\EF@debugrep{cmeuro}%
-\EFiftexteuroexists{\texteuro}{\makefakeeuro}}
-\ifEF@eurosym
-\EF@debugrep{Using eurosym's euro command}
-\providecommand{\makecmeuro}     {\EF@debugrep{makecmeuro;      ESeuro}\ESeuro}
-\providecommand{\makedefaulteuro}{\EF@debugrep{makedefaulteuro; ESeuro}\ESeuro}
-\providecommand{\makeserifeuro}  {\EF@debugrep{makeserifeuro;   ESeuro}\ESeuro}
-\providecommand{\makesanseuro}   {\EF@debugrep{makesanseuro;    ESeuro}\ESeuro}
-\providecommand{\makemonoeuro}   {\EF@debugrep{makemonoeuro;    ESeuro}\ESeuro}
-\else
-\EF@debugrep{Not using eurosym's euro command}
-\providecommand{\makecmeuro}     {\EF@debugrep{makecmeuro     }\cmeuro}
-\providecommand{\makedefaulteuro}{\EF@debugrep{makedefaulteuro}\makefakeeuro}
-\providecommand{\makeserifeuro}  {\EF@debugrep{makeserifeuro  }\serifeuro}
-\providecommand{\makesanseuro}   {\EF@debugrep{makesanseuro   }\sanseuro}
-\providecommand{\makemonoeuro}   {\EF@debugrep{makemonoeuro   }\monoeuro}
-\fi
-\providecommand{\makechinaeeuro}
-               {\EF@debugrep{makechinaeeuro}\chinaeeuro}
-\DeclareRobustCommand{\EFeuro}{\EF@debugrep{start EFeuro:
- \f@encoding/\f@family/\f@series/\f@shape}%
- \EF@checkiflisted{\f@family}{\userlist}\relax
- \ifEF@listed\EF@debugrep{EFeuro makeuser euro}\makeusereuro
-  \else
-  \@ifundefined{\f@family euro}{\@tempswatrue}%   test for \<fam>euro
-  {\EF@debugrep{EFeuro \f@family euro}\relax%           do \<fam>euro
-  \@tempswafalse\csname\f@family euro\endcsname}\relax% do \<fam>euro
-  \if@tempswa% if \<fam>euro doesn't exist, do the next test
-    \EF@checkiflisted{\f@family}{\texteurolist}\relax
-    \ifEF@listed \EF@debugrep{EFeuro texteuro}\maketexteuro
-      \else
-      \EF@checkiflisted{\f@family}{\chinaelist}\relax
-      \ifEF@listed \EF@debugrep{EFeuro China2e euro}\makechinaeeuro
-        \else
-        \EF@checkiflisted{\f@family}{\cmlist}\relax
-        \ifEF@listed \EF@debugrep{EFeuro cm euro}\makecmeuro
-          \else
-          \EF@checkiflisted{\f@family}{\seriflist}\relax
-          \ifEF@listed \EF@debugrep{EFeuro serif euro}\makeserifeuro
-            \else
-            \EF@checkiflisted{\f@family}{\sanslist}\relax
-            \ifEF@listed \EF@debugrep{EFeuro sans euro}\makesanseuro
-              \else
-              \EF@checkiflisted{\f@family}{\monolist}\relax
-              \ifEF@listed \EF@debugrep{EFeuro mono euro}\makemonoeuro
-                \else
-                \EF@checkiflisted{\f@family}{\fakelightlist}\relax
-                \ifEF@listed \EF@debugrep{EFeuro fake light euro}\makefakelighteuro
-                  \else
-                  \EF@checkiflisted{\f@family}{\fakemediumlist}\relax
-                  \ifEF@listed \EF@debugrep{EFeuro fake med euro}\makefakemediumeuro
-                    \else
-                    \EF@checkiflisted{\f@family}{\fakeheavylist}\relax
-                    \ifEF@listed \EF@debugrep{EFeuro fake heavy euro}\makefakeheavyeuro
-                      \else \EF@debugrep{EFeuro default euro}\makedefaulteuro
-                      \fi \fi \fi \fi \fi \fi \fi \fi \fi \fi \fi}
-\AtBeginDocument{%
-\let\oldeuro\euro% save the previous \euro command (if one exists)
-\let\euro\EFeuro}% make the \euro command be \EFeuro come what may
-\endinput
-%%
-%% End of file `eurofont.sty'.
diff --git a/Master/texmf-dist/tex/latex/eurofont/europs.sty b/Master/texmf-dist/tex/latex/eurofont/europs.sty
deleted file mode 100644
index 7fbaa82a615..00000000000
--- a/Master/texmf-dist/tex/latex/eurofont/europs.sty
+++ /dev/null
@@ -1,28 +0,0 @@
-%%
-%% This is file `europs.sty',
-%% generated with the docstrip utility.
-%%
-%% The original source files were:
-%%
-%% europs.dtx  (with options: `style')
-%% 
-%% Copyright 1998 Joern Clausen
-%% 
-\ProvidesPackage{europs}
-     [1999/01/16 v1.2 Euro Currency Symbol PostScript]
-\NeedsTeXFormat{LaTeX2e}
-\RequirePackage{ifthen}
-\providecommand{\EURtm}{{\fontencoding{U}\fontfamily{zpeu}\selectfont E}}
-\providecommand{\EURhv}{{\fontencoding{U}\fontfamily{zpeus}\selectfont E}}
-\providecommand{\EURcr}{{\fontencoding{U}\fontfamily{zpeut}\selectfont E}}
-\providecommand{\EUR}{%
-  \ifthenelse{\equal{\f@family}{\rmdefault}}%
-  {\EURtm}%
-  {\ifthenelse{\equal{\f@family}{\ttdefault}}%
-      {\EURcr}%
-      {\EURhv}}%
-    }
-\providecommand{\EURofc}{{\usefont{U}{zpeus}{m}{n} E}}
-\endinput
-%%
-%% End of file `europs.sty'.
diff --git a/Master/texmf-dist/tex/latex/eurofont/uzmvs.fd b/Master/texmf-dist/tex/latex/eurofont/uzmvs.fd
deleted file mode 100644
index 7d69bf7246e..00000000000
--- a/Master/texmf-dist/tex/latex/eurofont/uzmvs.fd
+++ /dev/null
@@ -1,47 +0,0 @@
-%% LaTeX2e file `uzmvs.fd'
-%% generated by the `filecontents' environment
-%% from source `eurofont' on 1999/02/02.
-%%
-% Filename: uzmvs.fd
-% Copyright 1998 Rowland McDonnell
-% email rebecca@astrid.u-net.com
-%
-% Fount definitions for Marvosym
-%
-% THIS FILE SHOULD BE PUT IN A TEX INPUTS DIRECTORY
-%
-% The slightly strange name is because Marvosym already has an
-% official name and I'd like to avoid any conflicts.  So make the
-% Marvosym used by eurofont.sty a bizzare one (z prefix) because
-% nothing else seems right to me.
-%
-% Please don't use this file for anything directly: it's meant to
-% provide NFSS fount definitions so that the eurofont package can make
-% a half-decent job of printing euro symbols using the Marvosym
-% fount.  Because of this, it's a bit eccentric to match eurofont's
-% eccentric way of doing things.
-%
-% If you want to modify the code in this file, save the file under a
-% different name and modify *that*.  Please make sure you add a note
-% indicating that you've changed things.
-%
-\ProvidesFile{uzmvs.fd}
-   [1998/10/10 Hacked by RJMM font definitions for U/zmvs.]
-%
-\DeclareFontFamily{U}{zmvs}{}
-\DeclareFontShape{U}{zmvs}{m}{n} {<-> fmvr8x}{}
-%
-% Extra font defs needed
-\DeclareFontShape{U}{zmvs}{m}{it}{<-> fmvri8x}{}
-\DeclareFontShape{U}{zmvs}{m}{sl}{<-> fmvri8x}{}
-\DeclareFontShape{U}{zmvs}{m}{sc}{<-> fmvr8x}{}
-%
-\DeclareFontShape{U}{zmvs}{l}{n} {<-> fmvr8x}{}
-\DeclareFontShape{U}{zmvs}{l}{it}{<-> fmvri8x}{}
-\DeclareFontShape{U}{zmvs}{l}{sl}{<-> fmvri8x}{}
-\DeclareFontShape{U}{zmvs}{l}{sc}{<-> fmvr8x}{}
-%
-\DeclareFontShape{U}{zmvs}{l} {ui} {<->ssub * zmvs/m/n}{}
-\DeclareFontShape{U}{zmvs}{m} {ui} {<->ssub * zmvs/m/n}{}
-%
-\endinput
diff --git a/Master/texmf-dist/tex/latex/eurofont/uzpeu.fd b/Master/texmf-dist/tex/latex/eurofont/uzpeu.fd
deleted file mode 100644
index 75dc4b56d4a..00000000000
--- a/Master/texmf-dist/tex/latex/eurofont/uzpeu.fd
+++ /dev/null
@@ -1,24 +0,0 @@
-%%
-%% This is file `uzpeu.fd',
-%% generated with the docstrip utility.
-%%
-%% The original source files were:
-%%
-%% europs.dtx  (with options: `uzpeu')
-%% 
-%% Copyright 1998 Joern Clausen
-%% 
-\ProvidesFile{uzpeu.fd}
-     [1999/01/16 v1.2 font definitions for U/zpeu]
-\DeclareFontFamily{U}{zpeu}{}
-\DeclareFontShape{U}{zpeu}{m}{n}{<->zpeur}{}
-\DeclareFontShape{U}{zpeu}{m}{it}{<->zpeuri}{}
-\DeclareFontShape{U}{zpeu}{bx}{n}{<->zpeub}{}
-\DeclareFontShape{U}{zpeu}{bx}{it}{<->zpeubi}{}
-\DeclareFontShape{U}{zpeu}{b}{n}{<->ssub * zpeu/bx/n}{}
-\DeclareFontShape{U}{zpeu}{b}{it}{<->ssub * zpeu/bx/it}{}
-\DeclareFontShape{U}{zpeu}{m}{sl}{<->ssub * zpeu/m/it}{}
-\DeclareFontShape{U}{zpeu}{bx}{sl}{<->ssub * zpeu/bx/it}{}
-\endinput
-%%
-%% End of file `uzpeu.fd'.
diff --git a/Master/texmf-dist/tex/latex/eurofont/uzpeur.fd b/Master/texmf-dist/tex/latex/eurofont/uzpeur.fd
deleted file mode 100644
index d31999f9ae6..00000000000
--- a/Master/texmf-dist/tex/latex/eurofont/uzpeur.fd
+++ /dev/null
@@ -1,43 +0,0 @@
-%% LaTeX2e file `uzpeur.fd'
-%% generated by the `filecontents' environment
-%% from source `eurofont' on 1999/02/02.
-%%
-% Filename: uzpeur.fd
-% Copyright 1998 Rowland McDonnell
-% email rebecca@astrid.u-net.com
-%
-% Fount definitions for Adobe Euroserif
-%
-%THIS FILE SHOULD BE PUT IN A TEX INPUTS DIRECTORY
-
-\ProvidesFile{uzpeur.fd}
-   [1998/10/10 Eurofont package font definitions for U/zpeur.]
-
-\DeclareFontFamily{U}{zpeur}{\hyphenchar\font\m@ne}%
-
-\DeclareFontShape{U}{zpeur}{m}{n} {<->zpeur} {}
-\DeclareFontShape{U}{zpeur}{m}{it}{<->zpeuri}{}
-\DeclareFontShape{U}{zpeur}{m}{sl}{<->ssub * zpeur/m/it}{}
-\DeclareFontShape{U}{zpeur}{m}{sc}{<->ssub * zpeur/m/n}{}
-
-\DeclareFontShape{U}{zpeur}{b}{n} {<->zpeub} {}
-\DeclareFontShape{U}{zpeur}{b}{it}{<->zpeubi}{}
-\DeclareFontShape{U}{zpeur}{b}{sl}{<->ssub * zpeur/b/it} {}
-\DeclareFontShape{U}{zpeur}{b}{sc}{<->ssub * zpeur/b/n}{}
-
-\DeclareFontShape{U}{zpeur}{l}{n} {<->ssub * zpeur/m/n} {}
-\DeclareFontShape{U}{zpeur}{l}{it}{<->ssub * zpeur/m/it}{}
-\DeclareFontShape{U}{zpeur}{l}{sl}{<->ssub * zpeur/m/it}{}
-\DeclareFontShape{U}{zpeur}{l}{sc}{<->ssub * zpeur/m/n} {}
-
-\DeclareFontShape{U}{zpeur}{bx}{n} {<->ssub * zpeur/b/n} {}
-\DeclareFontShape{U}{zpeur}{bx}{it}{<->ssub * zpeur/b/it}{}
-\DeclareFontShape{U}{zpeur}{bx}{sl}{<->ssub * zpeur/b/it}{}
-\DeclareFontShape{U}{zpeur}{bx}{sc}{<->ssub * zpeur/b/n} {}
-
-\DeclareFontShape{U}{zpeur}{l} {ui} {<->ssub * zpeur/m/n}{}
-\DeclareFontShape{U}{zpeur}{m} {ui} {<->ssub * zpeur/m/n}{}
-\DeclareFontShape{U}{zpeur}{b} {ui} {<->ssub * zpeur/b/n}{}
-\DeclareFontShape{U}{zpeur}{bx}{ui} {<->ssub * zpeur/b/n}{}
-%
-\endinput
diff --git a/Master/texmf-dist/tex/latex/eurofont/uzpeus.fd b/Master/texmf-dist/tex/latex/eurofont/uzpeus.fd
deleted file mode 100644
index 49103abfd4f..00000000000
--- a/Master/texmf-dist/tex/latex/eurofont/uzpeus.fd
+++ /dev/null
@@ -1,24 +0,0 @@
-%%
-%% This is file `uzpeus.fd',
-%% generated with the docstrip utility.
-%%
-%% The original source files were:
-%%
-%% europs.dtx  (with options: `uzpeus')
-%% 
-%% Copyright 1998 Joern Clausen
-%% 
-\ProvidesFile{uzpeus.fd}
-     [1999/01/16 v1.2 font definitions for U/zpeus]
-\DeclareFontFamily{U}{zpeus}{}
-\DeclareFontShape{U}{zpeus}{m}{n}{<->zpeurs}{}
-\DeclareFontShape{U}{zpeus}{m}{it}{<->zpeuris}{}
-\DeclareFontShape{U}{zpeus}{bx}{n}{<->zpeubs}{}
-\DeclareFontShape{U}{zpeus}{bx}{it}{<->zpeubis}{}
-\DeclareFontShape{U}{zpeus}{b}{n}{<->ssub * zpeus/bx/n}{}
-\DeclareFontShape{U}{zpeus}{b}{it}{<->ssub * zpeus/bx/it}{}
-\DeclareFontShape{U}{zpeus}{m}{sl}{<->ssub * zpeus/m/it}{}
-\DeclareFontShape{U}{zpeus}{bx}{sl}{<->ssub * zpeus/bx/it}{}
-\endinput
-%%
-%% End of file `uzpeus.fd'.
diff --git a/Master/texmf-dist/tex/latex/eurofont/uzpeuss.fd b/Master/texmf-dist/tex/latex/eurofont/uzpeuss.fd
deleted file mode 100644
index d777905095c..00000000000
--- a/Master/texmf-dist/tex/latex/eurofont/uzpeuss.fd
+++ /dev/null
@@ -1,43 +0,0 @@
-%% LaTeX2e file `uzpeuss.fd'
-%% generated by the `filecontents' environment
-%% from source `eurofont' on 1999/02/02.
-%%
-% Filename: uzpeuss.fd
-% Copyright 1998 Rowland McDonnell
-% email rebecca@astrid.u-net.com
-%
-% Fount definitions for Adobe Eurosans
-%
-%THIS FILE SHOULD BE PUT IN A TEX INPUTS DIRECTORY
-
-\ProvidesFile{uzpeuss.fd}
-   [1998/10/10 Eurofont package font definitions for U/zpeuss.]
-
-\DeclareFontFamily{U}{zpeuss}{\hyphenchar\font\m@ne}%
-
-\DeclareFontShape{U}{zpeuss}{m}{n} {<->zpeurs} {}
-\DeclareFontShape{U}{zpeuss}{m}{it}{<->zpeuris}{}
-\DeclareFontShape{U}{zpeuss}{m}{sl}{<->ssub * zpeuss/m/it}{}
-\DeclareFontShape{U}{zpeuss}{m}{sc}{<->ssub * zpeuss/m/n}{}
-
-\DeclareFontShape{U}{zpeuss}{b}{n} {<->zpeubs} {}
-\DeclareFontShape{U}{zpeuss}{b}{it}{<->zpeubis}{}
-\DeclareFontShape{U}{zpeuss}{b}{sl}{<->ssub * zpeuss/b/it} {}
-\DeclareFontShape{U}{zpeuss}{b}{sc}{<->ssub * zpeuss/b/n}{}
-
-\DeclareFontShape{U}{zpeuss}{l}{n} {<->ssub * zpeuss/m/n}{}
-\DeclareFontShape{U}{zpeuss}{l}{it}{<->ssub * zpeuss/m/it}{}
-\DeclareFontShape{U}{zpeuss}{l}{sl}{<->ssub * zpeuss/m/it}{}
-\DeclareFontShape{U}{zpeuss}{l}{sc}{<->ssub * zpeuss/m/n} {}
-
-\DeclareFontShape{U}{zpeuss}{bx}{n} {<->ssub * zpeuss/b/n} {}
-\DeclareFontShape{U}{zpeuss}{bx}{it}{<->ssub * zpeuss/b/it}{}
-\DeclareFontShape{U}{zpeuss}{bx}{sl}{<->ssub * zpeuss/b/it}{}
-\DeclareFontShape{U}{zpeuss}{bx}{sc}{<->ssub * zpeuss/b/n} {}
-
-\DeclareFontShape{U}{zpeuss}{l} {ui} {<->ssub * zpeuss/m/n}{}
-\DeclareFontShape{U}{zpeuss}{m} {ui} {<->ssub * zpeuss/m/n}{}
-\DeclareFontShape{U}{zpeuss}{b} {ui} {<->ssub * zpeuss/m/b}{}
-\DeclareFontShape{U}{zpeuss}{bx}{ui} {<->ssub * zpeuss/m/b}{}
-%
-\endinput
diff --git a/Master/texmf-dist/tex/latex/eurofont/uzpeut.fd b/Master/texmf-dist/tex/latex/eurofont/uzpeut.fd
deleted file mode 100644
index bd600d7f70f..00000000000
--- a/Master/texmf-dist/tex/latex/eurofont/uzpeut.fd
+++ /dev/null
@@ -1,24 +0,0 @@
-%%
-%% This is file `uzpeut.fd',
-%% generated with the docstrip utility.
-%%
-%% The original source files were:
-%%
-%% europs.dtx  (with options: `uzpeut')
-%% 
-%% Copyright 1998 Joern Clausen
-%% 
-\ProvidesFile{uzpeut.fd}
-     [1999/01/16 v1.2 font definitions for U/zpeut]
-\DeclareFontFamily{U}{zpeut}{}
-\DeclareFontShape{U}{zpeut}{m}{n}{<->zpeurt}{}
-\DeclareFontShape{U}{zpeut}{m}{it}{<->zpeurit}{}
-\DeclareFontShape{U}{zpeut}{bx}{n}{<->zpeubt}{}
-\DeclareFontShape{U}{zpeut}{bx}{it}{<->zpeubit}{}
-\DeclareFontShape{U}{zpeut}{b}{n}{<->ssub * zpeut/bx/n}{}
-\DeclareFontShape{U}{zpeut}{b}{it}{<->ssub * zpeut/bx/it}{}
-\DeclareFontShape{U}{zpeut}{m}{sl}{<->ssub * zpeut/m/it}{}
-\DeclareFontShape{U}{zpeut}{bx}{sl}{<->ssub * zpeut/bx/it}{}
-\endinput
-%%
-%% End of file `uzpeut.fd'.
diff --git a/Master/texmf-dist/tex/latex/eurofont/uzpeutt.fd b/Master/texmf-dist/tex/latex/eurofont/uzpeutt.fd
deleted file mode 100644
index ca11d7f26f5..00000000000
--- a/Master/texmf-dist/tex/latex/eurofont/uzpeutt.fd
+++ /dev/null
@@ -1,43 +0,0 @@
-%% LaTeX2e file `uzpeutt.fd'
-%% generated by the `filecontents' environment
-%% from source `eurofont' on 1999/02/02.
-%%
-%Filename: uzpeutt.fd
-% Copyright 1998 Rowland McDonnell
-% email rebecca@astrid.u-net.com
-%
-% Fount definitions for Adobe Euromono
-%
-%THIS FILE SHOULD BE PUT IN A TEX INPUTS DIRECTORY
-
-\ProvidesFile{Uzpeutt.fd}
-   [1998/10/10 Eurofont package font definitions for U/zpeutt.]
-
-\DeclareFontFamily{U}{zpeutt}{\hyphenchar\font\m@ne}%
-
-\DeclareFontShape{U}{zpeutt}{m}{n} {<->zpeurt} {}
-\DeclareFontShape{U}{zpeutt}{m}{it}{<->zpeurit}{}
-\DeclareFontShape{U}{zpeutt}{m}{sl}{<->ssub * zpeutt/m/it}{}
-\DeclareFontShape{U}{zpeutt}{m}{sc}{<->ssub * zpeutt/m/n}{}
-
-\DeclareFontShape{U}{zpeutt}{b}{n} {<->zpeubt} {}
-\DeclareFontShape{U}{zpeutt}{b}{it}{<->zpeubit}{}
-\DeclareFontShape{U}{zpeutt}{b}{sl}{<->ssub * zpeutt/b/it} {}
-\DeclareFontShape{U}{zpeutt}{b}{sc}{<->ssub * zpeutt/b/n}{}
-
-\DeclareFontShape{U}{zpeutt}{l}{n} {<->ssub * zpeutt/m/n}{}
-\DeclareFontShape{U}{zpeutt}{l}{it}{<->ssub * zpeutt/m/it}{}
-\DeclareFontShape{U}{zpeutt}{l}{sl}{<->ssub * zpeutt/m/it}{}
-\DeclareFontShape{U}{zpeutt}{l}{sc}{<->ssub * zpeutt/m/n} {}
-
-\DeclareFontShape{U}{zpeutt}{bx}{n} {<->ssub * zpeutt/b/n} {}
-\DeclareFontShape{U}{zpeutt}{bx}{it}{<->ssub * zpeutt/b/it}{}
-\DeclareFontShape{U}{zpeutt}{bx}{sl}{<->ssub * zpeutt/b/it}{}
-\DeclareFontShape{U}{zpeutt}{bx}{sc}{<->ssub * zpeutt/b/n} {}
-
-\DeclareFontShape{U}{zpeutt}{l} {ui} {<->ssub * zpeutt/m/n}{}
-\DeclareFontShape{U}{zpeutt}{m} {ui} {<->ssub * zpeutt/m/n}{}
-\DeclareFontShape{U}{zpeutt}{b} {ui} {<->ssub * zpeutt/m/b}{}
-\DeclareFontShape{U}{zpeutt}{bx}{ui} {<->ssub * zpeutt/m/b}{}
-%
-\endinput
diff --git a/Master/tlpkg/libexec/ctan2tds b/Master/tlpkg/libexec/ctan2tds
index 7c3a8d45e2e..c560a091f54 100755
--- a/Master/tlpkg/libexec/ctan2tds
+++ b/Master/tlpkg/libexec/ctan2tds
@@ -303,7 +303,7 @@ chomp ($Build = `cd $Master/../Build/source && pwd`);
  'euclide',	"&MAKEpst",
  'eukleides',	"die 'skipping, requires compilation'",
  'eulervm',	"&MAKEcopy",
- 'eurofont',	"die 'skipping, not ready, sorry'",
+ 'eurofont',	"die 'skipping, support for nonfree fonts or obsolete'",
  'europs',	"die, skipping, support for nonfree fonts",
  'eurosans',	"die, skipping, support for nonfree fonts",
  'eurosym',	"&MAKEflatten",
diff --git a/Master/tlpkg/tlpsrc/collection-fontsrecommended.tlpsrc b/Master/tlpkg/tlpsrc/collection-fontsrecommended.tlpsrc
index 8de947b309a..0bd3afbfa85 100644
--- a/Master/tlpkg/tlpsrc/collection-fontsrecommended.tlpsrc
+++ b/Master/tlpkg/tlpsrc/collection-fontsrecommended.tlpsrc
@@ -11,7 +11,6 @@ depend cmextra
 depend courier
 depend euro
 depend euro-ce
-depend eurofont
 depend eurosym
 depend fpl
 depend helvetic
diff --git a/Master/tlpkg/tlpsrc/eurofont.tlpsrc b/Master/tlpkg/tlpsrc/eurofont.tlpsrc
deleted file mode 100644
index bedf455f90f..00000000000
--- a/Master/tlpkg/tlpsrc/eurofont.tlpsrc
+++ /dev/null
@@ -1,2 +0,0 @@
-execute addMap zpeu.map
-docpattern +!d texmf-dist/doc/fonts/fontinst/examples/eurofont