diff options
author | Karl Berry <karl@freefriends.org> | 2006-01-11 23:57:49 +0000 |
---|---|---|
committer | Karl Berry <karl@freefriends.org> | 2006-01-11 23:57:49 +0000 |
commit | f2711e54a3fe27741b396ff24211676b5039cc12 (patch) | |
tree | 42ff074d2069ca51dcbd5277e88d769f00adc9a4 /Master | |
parent | 447d7dec07938e4d7bcb4d21fc180a696b39a7b9 (diff) |
trunk/Master/texmf-dist/source/latex/siggraph
git-svn-id: svn://tug.org/texlive/trunk@516 c570f23f-e606-0410-a88d-b1316a301751
Diffstat (limited to 'Master')
-rw-r--r-- | Master/texmf-dist/source/latex/siggraph/README | 78 | ||||
-rw-r--r-- | Master/texmf-dist/source/latex/siggraph/siggraph.dtx | 1289 | ||||
-rw-r--r-- | Master/texmf-dist/source/latex/siggraph/siggraph.ins | 4 |
3 files changed, 1371 insertions, 0 deletions
diff --git a/Master/texmf-dist/source/latex/siggraph/README b/Master/texmf-dist/source/latex/siggraph/README new file mode 100644 index 00000000000..4f0b572ee32 --- /dev/null +++ b/Master/texmf-dist/source/latex/siggraph/README @@ -0,0 +1,78 @@ +SIGGRAPH class, version 1.1.1, January 17, 1996 +Written by Daniel Kartch + Program of Computer Graphics + Cornell University + dan@graphics.cornell.edu + +The latest version of these files can be found at + http://www.graphics.cornell.edu/~dan/texstuff/siggraph/ + +This distribution provides a document class for formatting papers +according to the specifications for submission to the annual +ACM Siggraph conference. It contains three files: + +README - this file +siggraph.dtx - documented source code +siggraph.ins - installation driver + +To install it, type + latex siggraph.ins +Then place the resulting siggraph.cls file somewhere where TeX can find it. + +To generate the user's guide, type + latex siggraph.dtx + makeindex -s gglo.ist -o siggraph.gls siggraph.glo + (If you don't have the makeindex program, you may skip this step. + The user's guide will be produced without the Change History.) + latex siggraph.dtx + +This package is distributed in the hope that it will be useful, +and to promote compatibility of documents created at different sites, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +Please see the siggraph.dtx file for copyright and distribution information. + +============================================================================= + +CHANGE HISTORY: + +v1.1.1 Changed copyright space to 1.5 inches. + +v1.1.0 Added \keywords and \estpages commands. + Disabled \passport command. + Changed \acmcategory/\acmformat commands to \category/\format. + +v1.0.0 Added preprint option. + Changed \acmpassport command to \passport. + +v0.9.0 Added \teaser command to allow pictures placed between the + title block and the start of the text. + Added \titlespace and \teaserspace to control spacing + between title block, teaser, and text. + +v0.8.3 Added \sectionfont command. + Added singlespace and doublespace options + Lots of internal changes in implementation + +v0.8.1 Made copyright space 1 inch + +v0.8.0 I really hated having to use the \acmopening command to + instead of \maketitle and the abstract environment in order + to get the abstract to appear on both the cover page and + in the paper. I finally figured out how to modify the + abstract environment to store its contents for use on + the cover page, so the \acmopening command has now + been eliminated. + +v0.7.0 Added `widereview' option for one-column, double-spaced, + 12-point review papers + +v0.6.3 Fixed one-column mode + Put page numbers back in for review papers + +v0.6.2 Fixed missing affiliation in title block + +v0.6.1 Made titles bold + Minor corrections in user's guide + + diff --git a/Master/texmf-dist/source/latex/siggraph/siggraph.dtx b/Master/texmf-dist/source/latex/siggraph/siggraph.dtx new file mode 100644 index 00000000000..0596c3a3e14 --- /dev/null +++ b/Master/texmf-dist/source/latex/siggraph/siggraph.dtx @@ -0,0 +1,1289 @@ +% \iffalse meta-comment +% +% file: siggraph.dtx +% version: 1.1.1 +% date: January 17, 1996 +% +% Provides `siggraph' document class for use with LaTeX2e. +% Formats a document according to ACM Siggraph conference proceedings +% specifications. +% +%% +%% Copyright (C) 1996 Daniel Kartch +%% Program of Computer Graphics +%% Cornell University +%% dan@graphics.cornell.edu +%% +%% This file is distributed in the hope that it will be useful, +%% but WITHOUT ANY WARRANTY; without even the implied warranty of +%% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +%% +% +% This file may be freely copied in whole or in part under the following +% conditions: +% 1) Unmodified copies may be freely distributed separately or as part +% of larger packages. +% 2) You may make modified copies of this file for you own personal use, +% but you may not distribute modified copies. You may place modifications +% in a siggraph.cfg file (see the documentation), and distribute that +% file individually or along with this source. However, if you do +% so, the .cfg file must contain code to issue a warning when it is +% invoked by LaTeX that states: +% a) The fact that it is being loaded and it is not part of the +% standard distribution +% b) What it does (briefly) +% c) That it can be disabled by removing or renaming the .cfg file +% 3) Excerpts from this file may be freely used and distributed as part +% of other macro packages. +% +% Portions of this file (namely the \@maketitle macro and the commands to +% set up 9pt type) are modified versions of those provided with the standard +% LaTeX files article.cls file and size10.clo, and their distribution may +% be further restricted by the LaTeX copyright. (Probably not, but better +% safe than sorry.) +% +%% +%% NOTE: +%% This is a beta release and hasn't been thoroughly tested yet. Please +%% send me any bug reports, suggestions for improvement, or other comments. +%% I will do my best to fix any problems before the Siggraph submission +%% deadline, but I make no promises. The likelihood of my responding to +%% any given comment is directly proportional to the amount of time before +%% the deadline that the comment is received. +%% +% \fi +% +% \CheckSum{814} +%% \CharacterTable +%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z +%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z +%% Digits \0\1\2\3\4\5\6\7\8\9 +%% Exclamation \! Double quote \" Hash (number) \# +%% Dollar \$ Percent \% Ampersand \& +%% Acute accent \' Left paren \( Right paren \) +%% Asterisk \* Plus \+ Comma \, +%% Minus \- Point \. Solidus \/ +%% Colon \: Semicolon \; Less than \< +%% Equals \= Greater than \> Question mark \? +%% Commercial at \@ Left bracket \[ Backslash \\ +%% Right bracket \] Circumflex \^ Underscore \_ +%% Grave accent \` Left brace \{ Vertical bar \| +%% Right brace \} Tilde \~} +%% +% +% \iffalse +% \begin{macrocode} +%<+class>\NeedsTeXFormat{LaTeX2e}[1994/06/01] +%<+class>\ProvidesClass{siggraph} +%<*driver> + \ProvidesFile{siggraph.drv} +%</driver> + [1996/01/17 v1.1.1 +%<+class> Siggraph proceedings document class] +%<*driver> +] +%</driver> +% \end{macrocode} +% +% \section{Driver for this document} +% +% The following contains the driver for generating this document. +% It can be extracted from the |.dtx| file with the \dst{} program. +% +% \begin{macrocode} +%<*driver> +\documentclass{ltxdoc} +\GetFileInfo{siggraph.drv} +%\DisableCrossrefs +\RecordChanges +\OnlyDescription % comment out for full source description +\begin{document} + \DocInput{siggraph.dtx} +\end{document} +%</driver> +% \end{macrocode} +%\fi +% +% \newenvironment{mylist}{% +% \begin{list}{\labelitemi}{% +% \addtolength{\leftmargin}{2em}% +% \setlength{\itemindent}{-1em}% +% \setlength{\parsep}{0in}% +% \setlength{\itemsep}{0.5ex}}}{\end{list}} +% +% \changes{v0.6.1}{1994/12/26}{Minor modifications to user's guide} +% +% \title{The |siggraph| Document Class Users' Guide\thanks{ +% This file has version number \fileversion{} dated \filedate{}. +% The most recent version can be found at +% {\ttfamily http://www.graphics.cornell.edu/\~{}dan/texstuff/siggraph/}}} +% +% \author{Daniel Kartch\thanks{dan@graphics.cornell.edu}} +% +% \date{\filedate} +% +% \maketitle +% +% \begin{abstract} +% This document class modifies the standard |article| class to conform to +% the specifications for papers published in the proceedings of the annual +% ACM Siggraph conference. +% It sets all the necessary layout parameters and handles the differences +% in format between a paper being submitted for blind review and a camera +% ready copy of an accepted paper. +% Several additional features are also provided. +% +% \vspace{\baselineskip} +% \begin{quote} +% DISCLAIMER: This class is distributed in the hope that it will be useful, +% and to promote compatibility of documents created at different sites. +% However it is provided WITHOUT ANY WARRANTY; without even the implied +% warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. +% Please see the |siggraph.dtx| source file for copyright and distribution +% information. +% \end{quote} +% \end{abstract} +% +% \section{Introduction} +% +% This document describes the |siggraph| document class, for use with \LaTeXe{}. +% It is intended as a replacement for the various versions of the old +% |siggraph.sty| file that have been floating around for years. +% It loads in the |article| class and modifies several parameters +% to comply with the layout specifications for a paper submitted to +% the ACM Siggraph conference. +% Currently, these specifications are: +% \begin{mylist} +% \label{layoutlist} +% \item $\frac{3}{4}$ inch margins on top and sides, 1 inch margin on bottom +% \item two column mode with 2 pica column separation +% \item space for copyright is 1.5 inch +% \changes{v0.8.1}{1995/03/22}{Made copyright space 1 inch} +% \changes{v1.1.1}{1996/01/17}{Made copyright space 1.5 inch} +% \item 9 point type on 10 point baselines +% \item no page numbers +% \changes{v0.6.3}{1995/01/06}{Put page numbers back in for review option} +% \end{mylist} +% Also set by the class but not part of the siggraph specifications are: +% \begin{mylist} +% \changes{v0.6.1}{1994/12/26}{Made titles bold} +% \item titles and section headings are bold sans serif +% \item 1 em paragraph indentation +% \item |flushbottom| mode +% \end{mylist} +% +% The class also allows the user to specify whether the paper is being +% submitted for blind review or as a final, camera-ready document. +% When review mode is specified, it will automatically generate a +% cover sheet for the paper, modify the title block on the first page +% to protect anonymity, and (optionally) switch to a more widely spaced +% layout. +% Mechanisms are also provided to allow the user to introduce text conditional +% on the chosen submission mode. +% +% \section{Usage} +% +% To use this class, specify +% \begin{verbatim} \documentclass{siggraph} \end{verbatim} +% at the beginning of your document. +% The following options may be included in the |\documentclass| command: +% +% \begin{mylist} +% \item \DescribeMacro{cameraready}|cameraready|, +% \DescribeMacro{preprint}|preprint|, +% \DescribeMacro{review}|review|, or +% \DescribeMacro{widereview}|widereview| +% \changes{v0.7.0}{1995/01/23}{Added widereview option} +% \changes{v1.0.0}{1995/12/18}{Added preprint option} +% \newline These specify the submission mode for the paper. +% |cameraready|, the default, sets the layout parameters as +% described in section~\ref{layoutlist}. +% The |preprint| option adds page numbers and prints the message +% ``To appear in the SIGGRAPH conference proceedings'' in the top +% margin. This message can be changed with the +% \DescribeMacro{\preprinttext}|\preprinttext{|\meta{message}|}| +% command. +% The |review| option uses the same layout as |cameraready| but +% adds page numbers and modifies the title block as described +% in the next section. +% The |widereview| option is for people who prefer review papers +% that have a more widely spaced layout. +% It uses one-column mode with 12 point, double-spaced type. +% Other effects of these options will be described later. +% +% \item \DescribeMacro{onecolumn}|onecolumn| or +% \DescribeMacro{twocolumn}|twocolumn| +% \changes{v0.6.3}{1995/01/09}{Fixed onecolumn option} +% \item \DescribeMacro{singlespace}|singlespace| or +% \DescribeMacro{doublespace}|doublespace| +% \changes{v0.8.3}{1995/03/27}{Added singlespace and doublespace options} +% \item \DescribeMacro{9pt}|9pt|, +% \DescribeMacro{10pt}|10pt|, +% \DescribeMacro{11pt}|11pt|, or +% \DescribeMacro{12pt}|12pt| +% \newline These three sets of options will override the default +% settings for the number of columns, line spacing, and point size +% determined by the submission mode. +% Overriding the settings when in camera-ready mode, while allowed, +% is a violation of the submission specifications and will produce +% a warning message. +% +% \item \DescribeMacro{version1996}|version1996| or +% \DescribeMacro{version1994}|version1994| +% \newline The submission specifications can change from year to +% year, and I will try to keep this class updated to match them. +% However, since many papers are painstakingly typeset to fit +% the allotted pages exactly, small changes in the format can +% radically change their appearance. This class therefore includes +% a specification date to allow old documents to maintain their +% appearance even if the specs change. Although the most recent +% version is always the default, I recommend including it in the +% options list anyways, so that you won't have to think about +% it several years down the road. +% (The only difference between the 94 and 96 versions is that +% the space for the copyright is now a half inch larger.) +% +% \item Additionally, any other options supported by the |article| class +% may be used, except for |landscape| and |titlepage|, which are +% disabled. +% \end{mylist} +% +% +% \section{Title Block, Abstract, and Cover Page} +% +% \subsection{Data fields} +% +% In addition to the |\title| and |\author| commands provided by the |article| +% class, several other pieces of information can be set. +% Each of these commands takes a single argument, the value to which the +% corresponding field should be set. +% \begin{mylist} +% \item \DescribeMacro{\affiliation}|\affiliation| +% +% If all the authors share an affiliation, it can be set with this +% command rather than individually within the author command. +% The affiliation will appear centered below the author list. +% +% \item \DescribeMacro{\category}|\category| and +% \DescribeMacro{\format}|\format| +% \changes{v1.1.0}{1996/01/08}{Replaced acmcategory/acmformat with +% category/format. Old versions still enabled.} +% +% The paper category (research, systems, ...) and format (print, video). +% +% \item \DescribeMacro{\contactname}|\contactname|, +% \DescribeMacro{\contactaddress}|\contactaddress|, +% \DescribeMacro{\contactphone}|\contactphone|, +% \DescribeMacro{\contactfax}|\contactfax|, +% \DescribeMacro{\contactemail}|\contactemail| +% +% These should be used to set the information about the person to +% be contacted about the paper. +% +% \item \DescribeMacro{\passport}|\passport| +% \changes{v1.0.0}{1995/12/18}{Replaced acmpassport with passport. +% Old version still enabled.} +% \changes{v1.1.0}{1996/01/08}{Disabled passport command; no longer required.} +% +% The author who will receive compensation if the paper is accepted. +% \emph{As of 1996, this is no longer requested when submitting papers +% for review and the command has been disabled.} +% +% \item \DescribeMacro{\keywords}|\keywords| +% \changes{v1.1.0}{1996/01/08}{Added keywords command} +% +% A list of keywords to be printed on the cover page +% +% \item \DescribeMacro{\estpages}|\estpages| +% \changes{v1.1.0}{1996/01/08}{Added estpages command} +% +% The estimated number of pages that the paper would require in the +% conference proceedings. +% +% \end{mylist} +% +% \subsection{Title block} +% +% The title block is generated with the normal \LaTeX{} +% \DescribeMacro{\maketitle}|\maketitle| command. +% For a camera ready document it will contain: +% \begin{mylist} +% \item Title +% \item Authors +% \item Affiliation (if any) +% \changes{v0.6.2}{1995/01/05}{Fixed missing affiliation in title block} +% \end{mylist} +% +% For a review paper it will instead contain: +% \begin{mylist} +% \item Title +% \item Paper category +% \end{mylist} +% \changes{v1.1.0}{1996/01/08}{Removed paper format from first page of paper.} +% The review options will also suppress printing of any information +% specified with the |\thanks| command. +% +% \changes{v0.9.0}{1994/04/20}{Added teaser} +% Some authors like to include a pretty picture of their results between +% the title block and the start of the text to act as a teaser. +% Because of the way \LaTeX's float placement scheme works, this seemingly +% simple task is apparently impossible to do in a two column document +% without making the picture part of the |\maketitle| command. +% Therefore, that's exactly what I've done. +% The class provides a \DescribeMacro{\teaser}|\teaser{|\meta{figure}|}| +% command, whose contents will appear as a figure centered below the +% title block. +% Theoretically, anything that can appear in a |figure| environment can +% appear here. +% However, the current implementation is a bit of a kludge, so some things +% might not work. +% I've already been told that it isn't compatible with the |float| package. +% I'll see what I can do to improve it when I get the chance. +% +% \changes{v0.9.0}{1994/04/20}{Added \cmd{\titlespace} and \cmd{\teaserspace}} +% The space between the title block text and the rest of the document, and +% between the teaser (if any) and the start of the main text are controlled +% by the length parameters \DescribeMacro{\titlespace}|\titlespace| and +% \DescribeMacro{\teaserspace}|\teaserspace|. +% They both default to $\frac{1}{4}$ inch, but can be changed with the +% normal \LaTeX{} length setting commands. +% +% \subsection{Abstract} +% +% The abstract should be specified with the |abstract| environment. +% In addition to appearing in the paper itself, its contents will stored +% and will appear on the cover page (in review mode). +% +% \subsection{Cover page} +% +% When the |review| or |widereview| option is specified, +% a cover sheet will automatically be generated at the end of the document. +% Placing the \DescribeMacro{\suppresscover}|\suppresscover| command +% in the preamble will prevent this. +% The cover sheet will contain: +% \begin{mylist} +% \item Title +% \item Authors +% \item Affiliation (if any) +% \item Paper category +% \item Contact information +% \item A copy of the abstract +% \item List of keywords +% \item Estimated number of pages +% \end{mylist} +% +% \subsection{Obsolete command} +% +% In previous versions of this class, it was necessary to use a command +% called \DescribeMacro{\acmopening}|\acmopening| in place of the +% |\maketitle| command and +% \changes{v0.8.0}{1995/03/07}{Eliminated \cmd{\acmopening} command} +% |abstract| environment in order to get the abstract to appear on the +% cover page as well as in the text. +% This is no longer necessary, and users should switch back to +% the normal commands. +% +% +% \section{Other Features} +% +% \subsection{Copyright notice} +% +% As with the old |siggraph.sty|, this class provides a +% \DescribeMacro{\copyrightspace}|\copyrightspace| +% command to leave space at the bottom of the first column for the copyright +% notice. +% This command should be placed after the last footnote that will appear in +% the first column. +% As of yet, there is no way to have this done automatically, but I am looking +% into it. +% +% \subsection{Title and section heading font} +% +% By default, this class uses bold sans-serif for the title and +% section heading font. +% This behavior can be altered with the +% \DescribeMacro{\sectionfont}|\sectionfont{|\meta{fontcommands}|}| command. +% \changes{v0.8.3}{1995/03/27}{Added \cmd{\sectionfont} command} +% \meta{fontcommands} should be one or more font changing commands, +% for instance ``|\rmfamily\scshape|'' or ``|\fontfamily{pcr}\selectfont|''. +% +% \subsection{Conditional text} +% +% \DescribeMacro{\ifcamera}\DescribeMacro{\ifreview} +% \DescribeMacro{\ifcameraelse}\DescribeMacro{\ifreviewelse} +% The class also provides the following four commands for writing text +% conditional on whether camera-ready or review mode has been +% chosen: +% \begin{quote} +% |\ifcamera{|\meta{thenclause}|}| +% +% |\ifreview{|\meta{thenclause}|}| +% +% |\ifcameraelse{|\meta{thenclause}|}{|\meta{elseclause}|}| +% +% |\ifreviewelse{|\meta{thenclause}|}{|\meta{elseclause}|}| +% \end{quote} +% The first two will generate the \meta{thenclause} if camera-ready +% (resp. review) mode is chosen, otherwise they resolve to a null string. +% The second two are the same as the first two but generate the +% \meta{elseclause} instead of a null string if the condition is not met. +% +% These can be used for writing the paper so as to protect anonymity for +% a submission for review, without having to worry about going back over it +% months later to put the identifying information back in if the paper +% is accepted. For example: +% \begin{quote}^^A +% |In \cite{FooBar1994}, \ifcameraelse{we}{Foo and Bar} showed that ...| +% \end{quote} +% or +% \begin{quote}^^A +% |as illustrated in the following \ifcameraelse{three}{two} images:| +% +% [include generic image] +% +% |\ifcamera{| [include our logo] |}| +% +% [include another generic image] +% \end{quote} +% +% \subsection{Configuration file} +% +% Individual users or sites may wish to modify the behavior of this +% class (for instance, to use a particular set of fonts.) +% Rather than having people hack the |.cls| file, which can lead to +% various incompatible versions at different sites, the class provides +% for a configuration file. +% After the class has finished loading, it will check to see if a +% |siggraph.cfg| file exists in the \TeX{} search path. +% If so, it will be input. +% Any user-- or site--specific modifications should be placed in this file. +% \textit{(See the copyright notice in the |siggraph.dtx| source file for +% information on distribution of configuration files.)} +% +% \StopEventually{\PrintChanges} +% +% \iffalse +%<*class> +% \fi +% +% \section{Implementation} +% +% \begin{quote} +% Warning: The implementation is a work in progress and may undergo radical +% alterations before the first non-beta release. Do not count on any of +% the internal representations remaining the same. Any suggestions for +% improving any aspects of the implementation are welcome. +% \end{quote} +% +% \subsection{Initial stuff} +% +% \begin{macro}{\ifacm@camera} +% \begin{macro}{\acm@columnmode} +% \begin{macro}{\acm@pointsize} +% \begin{macro}{\ifacm@doublespaced} +% First off, we need to initialize a few variables. +% |acm@camera| is a boolean which determines whether or not we're in +% camera ready mode. +% |\acm@preprint|, |\acm@columnmode|, |\acm@pointsize| +% and |acm@doublespaced| are pretty obvious. +% \begin{macrocode} +\newif\ifacm@camera +\newif\ifacm@preprint +\newcommand{\acm@columnmode}{} +\newcommand{\acm@pointsize}{} +\newif\ifacm@doublespaced +% \end{macrocode} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% +% \subsection{Option processing} +% +% \subsubsection{Submission mode} +% +% \begin{macro}{cameraready} +% \begin{macro}{preprint} +% \begin{macro}{review} +% \begin{macro}{widereview} +% The |cameraready|, |preprint|, |review|, and |widereview| options set the +% variables defined above appropriately. +% \begin{macrocode} +\DeclareOption{cameraready}{% + \acm@cameratrue% + \acm@preprintfalse% + \renewcommand{\acm@columnmode}{twocolumn}% + \acm@doublespacedfalse% + \renewcommand{\acm@pointsize}{9pt}} +\DeclareOption{review}{% + \acm@camerafalse% + \renewcommand{\acm@columnmode}{twocolumn}% + \acm@doublespacedfalse% + \renewcommand{\acm@pointsize}{9pt}} +\DeclareOption{widereview}{% + \acm@camerafalse% + \renewcommand{\acm@columnmode}{onecolumn}% + \acm@doublespacedtrue% + \renewcommand{\acm@pointsize}{12pt}} +\DeclareOption{preprint}{% + \acm@preprinttrue} +% \end{macrocode} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% By default, |cameraready| mode should be used. +% \begin{macrocode} +\ExecuteOptions{cameraready} +% \end{macrocode} +% +% \subsubsection{Layout parameters} +% +% \begin{macro}{\acm@optwarning} +% The |\acm@optwarning| command produces a warning message when one +% tries to override the default layout parameters while in camera-ready +% mode. +% \begin{macrocode} +\newcommand{\acm@optwarning}[1]{% + \ifacm@camera + \ClassWarningNoLine{siggraph}% + {#1 option used in camera-ready mode.\MessageBreak + This violates submission specifications} + \fi +} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{onecolumn} +% \begin{macro}{twocolumn} +% \begin{macro}{9pt} +% \begin{macro}{10pt} +% \begin{macro}{11pt} +% \begin{macro}{12pt} +% \begin{macro}{doublespace} +% \begin{macro}{singlespace} +% The various layout parameters can be set individually, overriding the +% values set by the specified submission mode. +% \begin{macrocode} +\DeclareOption{onecolumn}{% + \acm@optwarning{onecolumn} + \renewcommand{\acm@columnmode}{onecolumn}} +\DeclareOption{twocolumn}{% + \renewcommand{\acm@columnmode}{twocolumn}} +\DeclareOption{9pt}{% + \renewcommand{\acm@pointsize}{9pt}} +\DeclareOption{10pt}{% + \acm@optwarning{10pt} + \renewcommand{\acm@pointsize}{10pt}} +\DeclareOption{11pt}{% + \acm@optwarning{11pt} + \renewcommand{\acm@pointsize}{11pt}} +\DeclareOption{12pt}{% + \acm@optwarning{12pt} + \renewcommand{\acm@pointsize}{12pt}} +\DeclareOption{singlespace}{% + \acm@doublespacedfalse} +\DeclareOption{doublespace}{% + \acm@optwarning{doublespace} + \acm@doublespacedtrue} +% \end{macrocode} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% +% \subsubsection{Version} +% +% \begin{macro}{\acm@specversion} +% \begin{macro}{version1994} +% \begin{macro}{version1996} +% Set the version number. +% \begin{macrocode} +\newcount\acm@specversion +\DeclareOption{version1996}{\acm@specversion=1996} +\DeclareOption{version1994}{\acm@specversion=1994} +\ExecuteOptions{version1996} +% \end{macrocode} +% \end{macro} +% \end{macro} +% \end{macro} +% +% \subsubsection{Remaining options} +% +% Disable the |titlepage| and |landscape| options, and pass any remaining +% options on to the |article| class. +% +% \begin{macrocode} +\DeclareOption{titlepage}{% + \OptionNotUsed% + \ClassWarningNoLine{siggraph}{titlepage option not allowed}} +\DeclareOption{landscape}{% + \OptionNotUsed% + \ClassWarningNoLine{siggraph}{landscape option not allowed}} +\DeclareOption*{\PassOptionsToClass{\CurrentOption}{article}} +% \end{macrocode} +% +% \subsubsection{Option processing} +% +% Process the options, cause the appropriate column and point size options +% to be passed to the |article| class, and load the |article| class. +% +% \begin{macrocode} +\ProcessOptions +\PassOptionsToClass{\acm@columnmode}{article} +\ifdim\acm@pointsize>9pt + \PassOptionsToClass{\acm@pointsize}{article} +\fi +\LoadClass{article} +% \end{macrocode} +% +% \subsection{Conditional text} +% \begin{macro}{\preprinttext} +% Set up default message for preprints and command to change it. +% \begin{macrocode} +\newcommand{\acm@preprinttext}{To appear in the SIGGRAPH conference proceedings} +\newcommand{\preprinttext}[1]{\renewcommand{\acm@preprinttext}{#1}} +% \end{macrocode} +% \end{macro} +% +% +% \subsection{Conditional text} +% +% \begin{macro}{\ifcamera} +% \begin{macro}{\ifreview} +% \begin{macro}{\ifcameraelse} +% \begin{macro}{\ifreviewelse} +% Here we define the commands to include text conditionally, based on +% the submission mode. +% \begin{macrocode} +\newcommand{\ifcamera}[1]{\ifacm@camera #1 \fi} +\newcommand{\ifreview}[1]{\ifacm@camera \else #1 \fi} +\newcommand{\ifcameraelse}[2]{\ifacm@camera #1 \else #2 \fi} +\newcommand{\ifreviewelse}[2]{\ifacm@camera #2 \else #1 \fi} +% \end{macrocode} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% +% \subsection{Page layout} +% +% Set the margins, header and footer sizes, column separation, and indentation. +% +% \begin{macrocode} +\setlength{\textheight}{9.25in} +\setlength{\topmargin}{-0.700in} +\setlength{\headheight}{0.2in} +\setlength{\headsep}{0.250in} +\setlength{\footskip}{0.5in} +\flushbottom +\setlength{\textwidth}{7in} +\setlength{\oddsidemargin}{-0.25in} +\setlength{\evensidemargin}{-0.25in} +\setlength{\columnsep}{2pc} +\setlength{\parindent}{1em} +% \end{macrocode} +% +% Modify plain and empty page styles to turn off page numbering or turn on +% preprint message. +% +% \begin{macrocode} +\renewcommand{\ps@plain}% + {% + \ifacm@preprint% + \renewcommand{\@oddhead}{\hfil\textit{\large\acm@preprinttext}\hfil}% + \else% + \renewcommand{\@oddhead}{}% + \fi% + \ifacm@camera% + \ifacm@preprint% + \renewcommand{\@oddfoot}{\hfil\textrm{\thepage}\hfil}% + \else% + \renewcommand{\@oddfoot}{}% + \fi% + \else% + \renewcommand{\@oddfoot}{\hfil\textrm{\thepage}\hfil}% + \fi% + \renewcommand{\@evenhead}{\@oddhead}% + \renewcommand{\@evenfoot}{\@oddfoot}% + } +\renewcommand{\ps@empty}% + {% + \ifacm@preprint% + \renewcommand{\@oddhead}{\hfil\textit{\large\acm@preprinttext}\hfil}% + \else% + \renewcommand{\@oddhead}{}% + \fi% + \renewcommand{\@oddfoot}{}% + \renewcommand{\@evenhead}{\@oddhead}% + \renewcommand{\@evenfoot}{\@oddfoot}% + } +\pagestyle{plain} +% \end{macrocode} +% +% \subsection{Setting up 9pt point type} +% +% The code in this section is a modified version of that found in the +% |size10.clo| file from the June 1994 \LaTeX{} distribution, with values +% taken from the old |siggraph.sty| file. +% +% \begin{macro}{\acm@setninepoint} +% The |\acm@setninepoint| command sets the type size to 9pt. +% \begin{macrocode} +\newcommand{\acm@setninepoint}{ +% \end{macrocode} +% +% Redefine |\normalsize| to 9 points. +% +% \begin{macrocode} + \renewcommand\normalsize{% + \@setfontsize\normalsize\@ixpt\@xpt + \abovedisplayskip 9\p@ \@plus2\p@ \@minus4\p@ + \abovedisplayshortskip \z@ \@plus3\p@ + \belowdisplayshortskip 6\p@ \@plus3\p@ \@minus3\p@ + \belowdisplayskip \abovedisplayskip + \let\@listi\@listI} +% \end{macrocode} +% +% Redefine |\small| to 8 points. +% +% \begin{macrocode} + \renewcommand\small{% + \@setfontsize\small\@viipt\@ixpt + \abovedisplayskip 8.5\p@ \@plus3\p@ \@minus4\p@ + \abovedisplayshortskip \z@ \@plus2\p@ + \belowdisplayshortskip 4\p@ \@plus2\p@ \@minus2\p@ + \def\@listi{\leftmargin\leftmargini + \topsep 4\p@ \@plus2\p@ \@minus2\p@ + \parsep 2\p@ \@plus\p@ \@minus\p@ + \itemsep \parsep}% + \belowdisplayskip \abovedisplayskip} +% \end{macrocode} +% +% |\footnotesize|, |\scriptsize|, and |\tiny| remain the same as for +% 10 point documents. +% +% \begin{macrocode} + \renewcommand\footnotesize{% + \@setfontsize\footnotesize\@viiipt{9.5}% + \abovedisplayskip 6\p@ \@plus2\p@ \@minus4\p@ + \abovedisplayshortskip \z@ \@plus\p@ + \belowdisplayshortskip 3\p@ \@plus\p@ \@minus2\p@ + \def\@listi{\leftmargin\leftmargini + \topsep 3\p@ \@plus\p@ \@minus\p@ + \parsep 2\p@ \@plus\p@ \@minus\p@ + \itemsep \parsep}% + \belowdisplayskip \abovedisplayskip} + \renewcommand\scriptsize{\@setfontsize\scriptsize\@viipt\@viiipt} + \renewcommand\tiny{\@setfontsize\tiny\@vpt\@vipt} +% \end{macrocode} +% +% All the larger than normal sizes get decremented one step from their +% values in 10 point documents. +% +% \begin{macrocode} + \renewcommand\large{\@setfontsize\large\@xpt\@xiipt} + \renewcommand\Large{\@setfontsize\Large\@xiipt{14}} + \renewcommand\LARGE{\@setfontsize\LARGE\@xivpt{18}} + \renewcommand\huge{\@setfontsize\huge\@xviipt{22}} + \renewcommand\Huge{\@setfontsize\Huge\@xxpt{25}} +% \end{macrocode} +% +% To make sure the size changes are loaded immediately, we call |\selectfont|. +% \begin{macrocode} + \selectfont +} +% \end{macrocode} +% \end{macro} +% +% If not overridden, set type size to 9 points. +% +% \begin{macrocode} +\ifdim\acm@pointsize=9pt + \acm@setninepoint +\fi +% \end{macrocode} +% +% \subsection{Section headings} +% +% \begin{macro}{\sectionfont} +% The |\sectionfont| command lets the user modify the font used for +% section headings and the title. +% \begin{macrocode} +\newcommand{\acm@sectionfont}{} +\newcommand{\sectionfont}[1]{\renewcommand{\acm@sectionfont}{#1}} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\section} +% \begin{macro}{\subsection} +% \begin{macro}{\subsubsection} +% \begin{macro}{\paragraph} +% \begin{macro}{\subparagraph} +% We redefine the section headings to use bold sans serif type plus +% any modifications set with |\sectionfont|. (Otherwise +% these are the same definitions given in the |classes.dtx| file.) +% \begin{macrocode} +\renewcommand\section{\@startsection {section}{1}{\z@}% + {-3.5ex \@plus -1ex \@minus -.2ex}% + {2.3ex \@plus.2ex}% + {\reset@font\Large\sffamily\bfseries\acm@sectionfont}} +\renewcommand\subsection{\@startsection{subsection}{2}{\z@}% + {-3.25ex\@plus -1ex \@minus -.2ex}% + {1.5ex \@plus .2ex}% + {\reset@font\large\sffamily\bfseries\acm@sectionfont}} +\renewcommand\subsubsection{\@startsection{subsubsection}{3}{\z@}% + {-3.25ex\@plus -1ex \@minus -.2ex}% + {1.5ex \@plus .2ex}% + {\reset@font\normalsize\sffamily\bfseries\acm@sectionfont}} +\renewcommand\paragraph{\@startsection{paragraph}{4}{\z@}% + {3.25ex \@plus1ex \@minus.2ex}% + {-1em}% + {\reset@font\normalsize\sffamily\bfseries\acm@sectionfont}} +\renewcommand\subparagraph{\@startsection{subparagraph}{5}{\parindent}% + {3.25ex \@plus1ex \@minus .2ex}% + {-1em}% + {\reset@font\normalsize\sffamily\bfseries\acm@sectionfont}} +% \end{macrocode} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% +% +% +% \subsection{Title block} +% +% \begin{macro}{\acm@empty} +% This is used to check whether the affiliation and teaser have been set. +% \begin{macrocode} +\newcommand{\acm@empty}{} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\affiliation} +% \begin{macro}{\acm@affiliation} +% We define the |\affiliation| macro to set the authors' affiliation, +% and the |\acm@affiliation| macro to hold it. +% \begin{macrocode} +\newcommand{\acm@affiliation}{} +\newcommand{\affiliation}[1]{\renewcommand{\acm@affiliation}{#1}} +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\category} +% \begin{macro}{\acm@category} +% \begin{macro}{\format} +% \begin{macro}{\acm@format} +% These macros set and hold the paper's category and format. +% \begin{macrocode} +\newcommand{\acm@category}{} +\newcommand{\category}[1]{\renewcommand{\acm@category}{#1}} +\newcommand{\acmcategory}[1]{\category{#1}} +\newcommand{\acm@format}{} +\newcommand{\format}[1]{\renewcommand{\acm@format}{#1}} +\newcommand{\acmformat}[1]{\format{#1}} +% \end{macrocode} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\teaser} +% \begin{macro}{\acm@teaser} +% These macros hold the teaser (if any). +% \begin{macrocode} +\newcommand{\acm@teaser}{} +\newcommand{\teaser}[1]{\renewcommand{\acm@teaser}{#1}} +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\titlespace} +% \begin{macro}{\teaserspace} +% We also need to set up lengths for the distance between the title block +% and teaser from the rest of the text. We initialize them to +% $\frac{1}{4}$ inches. +% \begin{macrocode} +\newlength{\titlespace} +\setlength{\titlespace}{0.25in} +\newlength{\teaserspace} +\setlength{\teaserspace}{0.25in} +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\@maketitle} +% Now we redefine the \@maketitle command to properly format the title block. +% For camera-ready papers, it should have the title, authors, and affiliation. +% For review papers, it should have the title, paper category and format, +% plus all information specified with the |\thanks| command should be +% suppressed. +% \begin{macrocode} +\ifacm@camera + \renewcommand{\@maketitle}{% + \begin{center}% + {\LARGE\sffamily\bfseries\acm@sectionfont \@title \par}% + \vspace{1\baselineskip}% + \large + \begin{tabular}[t]{c}% + \@author + \end{tabular}\par% + \ifx\acm@affiliaton\acm@empty \else% + \vspace{1\baselineskip}% + \acm@affiliation\par% + \fi% + \vspace{\titlespace}% + \ifx\acm@teaser\acm@empty \else% + \begingroup% + \def\@captype{figure}% + \acm@teaser% + \endgroup\par% + \vspace{\teaserspace}% + \fi% + \end{center} \par% + } +\else + \renewcommand{\@maketitle}{% + \begin{center}% + \renewcommand{\thanks}[1]{} + {\LARGE\sffamily\bfseries\acm@sectionfont \@title \par}% + \vspace{1\baselineskip}% + {Category: \acm@category \par}% +% \vspace{0.25\baselineskip}% % no longer needed (1996) +% {Format: \acm@format \par}% % no longer needed (1996) + \vspace{\titlespace}% + \ifx\acm@teaser\acm@empty \else% + \begingroup% + \def\@captype{figure}% + \acm@teaser% + \endgroup\par% + \vspace{\teaserspace}% + \fi% + \end{center} \par% + } +\fi +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\maketitle} +% We also need to make several modifications to the |\maketitle| command. +% Since |\maketitle| wipes out the values of the title, author, etc\ldots, +% we have to make sure a copy gets saved. +% After the title block is output, +% the page numbering for the first page should be turned off, and +% double spacing, if selected, should be turned on. +% \begin{macrocode} +\let\acm@origmaketitle\maketitle +\renewcommand{\maketitle}{% + \let\acm@title\@title% + \let\acm@author\@author% + \acm@origmaketitle% + \thispagestyle{empty}% + \ifacm@doublespaced% + \renewcommand{\baselinestretch}{1.66}\selectfont% + \fi +} +% \end{macrocode} +% \end{macro} +% +% +% +% \subsection{Capturing the abstract} +% +% \begin{environment}{abstract} +% In order to have the abstract appear on the cover sheet, we need to +% redefine the |abstract| environment to store its contents so that +% the can be used later. +% This seemingly trivial problem is actually quite difficult. +% The code to do it is a modified version of the |\@collectbody| stuff +% from the AMS-\LaTeX{} source code. +% See that code for a more detailed explanation of how it works. +% +% \begin{macro}{\acm@abs} +% The |\acm@abs| token list is used to store the text of the abstract. +% \begin{macrocode} +\newtoks\acm@abs +% \end{macrocode} +% \end{macro} +% +% We only make these modifications if we are in review mode. +% \begin{macrocode} +\ifacm@camera\else +% \end{macrocode} +% +% \begin{macro}{\acm@add} +% The |\acm@add| command appends its argument to |\acm@abs|. +% \begin{macrocode} + \long\def\acm@add#1{\global\acm@abs\expandafter{\the\acm@abs#1}} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\acm@collect} +% \begin{macro}{\acm@@collect} +% The |\acm@collect| and |\acm@@collect| commands scan the input for the +% |\end{abstract}| command and place all input tokens leading up to it +% into |\acm@abs|. +% \begin{macrocode} + \long\def\acm@collect{% + \global\acm@abs{}% + \let\abstract\acm@@collect + \abstract + } + \long\def\acm@@collect#1\end#2{% + \def\@tempa{#2}% + \ifx\@tempa\@currenvir + \acm@add{#1}% + \edef\abstract{\noexpand\end{\@tempa}}% + \else + \acm@add{#1\end{#2}}% + \fi + \abstract + } +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\acm@modify} +% The |\acm@modify| command makes the actual modifications to the |abstract| +% environment. +% The new |abstract| stores its contents with the above macros, then +% outputs the abstract using its original definition. +% \begin{macrocode} + \newcommand{\acm@modify}{% + \let\acm@origabs\abstract% + \let\acm@origendabs\endabstract% + \renewenvironment{abstract}% + {\acm@collect}% + {\begingroup + \let\abstract\acm@origabs + \let\endabstract\acm@origendabs + \begin{abstract} \the\acm@abs \end{abstract} + \endgroup}% + } +% \end{macrocode} +% \end{macro} +% +% We want to allow the user to redefine the appearance of the |abstract| +% environment however he/she likes, so we hold off actually making the +% modifications to |abstract| until after the preamble. +% \begin{macrocode} + \AtBeginDocument{\acm@modify} +% \end{macrocode} +% +% End of review mode conditional: +% \begin{macrocode} +\fi +% \end{macrocode} +% \end{environment} +% +% +% +% \subsection{Copyright notice and footnote rule} +% +% \begin{macro}{\copyrightspace} +% The |\copyrightspace| macro creates an empty footnote tall enough +% for the copyright notice. +% \begin{macrocode} +\newlength{\acm@copyrightlength} +\ifnum\acm@specversion=1994 + \setlength{\acm@copyrightlength}{1in} +\else + \setlength{\acm@copyrightlength}{1.5in} +\fi +\newcommand{\copyrightspace}{% + \renewcommand{\thefootnote}{}% + \footnotetext[0]{\rule[\acm@copyrightlength]{2.71828in}{0in}}% + \renewcommand{\thefootnote}{\arabic{footnote}} +} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\footnoterule} +% I wanted a way to tell how many of the papers published in Siggraph +% are using my class, so I changed the size of the footnote rule from 40\% +% of the column width to 45\%. +% This doesn't make a noticable change in the paper's appearance, but +% can be quickly checked with a ruler. +% Thanks go to the devious little mind of Pete Shirley for suggesting +% this sneaky hack. +% \begin{macrocode} +\renewcommand{\footnoterule}{% + \kern-3pt + \hrule width 0.45\columnwidth + \kern 2.6pt} +% \end{macrocode} +% \end{macro} +% +% +% +% \subsection{Cover page} +% +% \begin{macro}{\contactname} +% \begin{macro}{\acm@contactname} +% \begin{macro}{\contactaddress} +% \begin{macro}{\acm@contactaddress} +% \begin{macro}{\contactphone} +% \begin{macro}{\acm@contactphone} +% \begin{macro}{\contactfax} +% \begin{macro}{\acm@contactfax} +% \begin{macro}{\contactemail} +% \begin{macro}{\acm@contactemail} +% \begin{macro}{\passport} +% \begin{macro}{\acm@passport} +% \begin{macro}{\acmpassport} +% \begin{macro}{\keywords} +% \begin{macro}{\acm@keywords} +% \begin{macro}{\estpages} +% \begin{macro}{\acm@estpages} +% We define macros to set and hold all the information about the person +% to be contacted about the paper and the author to receive compensation. +% \begin{macrocode} +\newcommand{\acm@contactname}{} +\newcommand{\contactname}[1]{\renewcommand{\acm@contactname}{#1}} +\newcommand{\acm@contactaddress}{} +\newcommand{\contactaddress}[1]{\renewcommand{\acm@contactaddress}{#1}} +\newcommand{\acm@contactphone}{} +\newcommand{\contactphone}[1]{\renewcommand{\acm@contactphone}{#1}} +\newcommand{\acm@contactfax}{} +\newcommand{\contactfax}[1]{\renewcommand{\acm@contactfax}{#1}} +\newcommand{\acm@contactemail}{} +\newcommand{\contactemail}[1]{\renewcommand{\acm@contactemail}{#1}} +%\newcommand{\acm@passport}{} +%\newcommand{\passport}[1]{\renewcommand{\acm@passport}{#1}} +\newcommand{\passport}[1]{% + \ClassWarningNoLine{siggraph}{% + You no longer need to specify which author should \MessageBreak% + receive a free conference passport when submitting \MessageBreak% + papers for review.\MessageBreak% + The passport command has therefore been disabled}} +\newcommand{\acmpassport}[1]{\passport{#1}} +\newcommand{\acm@keywords}{} +\newcommand{\keywords}[1]{\renewcommand{\acm@keywords}{#1}} +\newcommand{\acm@estpages}{} +\newcommand{\estpages}[1]{\renewcommand{\acm@estpages}{#1}} +% \end{macrocode} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% +% \begin{macro}{acm@cover} +% Set up a control to determine whether or not to print the cover page. +% \begin{macrocode} +\newif\ifacm@cover +\ifacm@camera + \acm@coverfalse +\else + \acm@covertrue +\fi +\newcommand{\suppresscover}{\acm@coverfalse} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\acm@coverpage} +% The |\acm@coverpage| macro handles the formatting of the cover page. +% \begin{macrocode} +\newcommand{\acm@coverpage}{% + \begin{titlepage}% + \def\thanks##1{} + \acm@setninepoint\normalsize + \renewcommand{\baselinestretch}{1}\selectfont + \begin{center}% + \vspace*{\fill} + {\LARGE\sffamily\bfseries\acm@sectionfont \acm@title \par}% + \vspace{2\baselineskip}% + {\large + \begin{tabular}[t]{c}% + \acm@author + \end{tabular}\par% + }% + \vspace{1\baselineskip}% + {\large \acm@affiliation \par}% + \addvspace{3\baselineskip}% + {Category: \acm@category \par}% + \vspace{0.5\baselineskip}% + {Format: \acm@format \par}% + \vspace{3\baselineskip}% + \begin{tabular}{ll} + Contact: & \acm@contactname \\[1\baselineskip] + & \begin{tabular}[b]{@{}l@{}} + \acm@contactaddress + \end{tabular} \\[1\baselineskip] + phone: & \acm@contactphone \\ + fax: & \acm@contactfax \\ + email: & \acm@contactemail + \end{tabular}\par% +% \vspace{3\baselineskip}% +% Author to receive compensation: \acm@passport \par% + \vspace*{3\baselineskip}% + {Estimated \# of pages: \acm@estpages \par}% + \vspace*{\baselineskip}% + {Keywords: \acm@keywords \par}% + \vspace*{\fill}% + \begin{minipage}{5in}% + \the\acm@abs + \end{minipage}\par% + \vspace*{\fill} + \end{center}% + \end{titlepage}% +} +% \end{macrocode} +% \end{macro} +% +% We cause the cover page to be generated at the end of the paper. +% \begin{macrocode} +\AtEndDocument{\ifacm@cover \acm@coverpage \fi} +% \end{macrocode} +% +% +% +% \subsection{Obsolete commands} +% +% The |\acmopening| command was needed before I figured out how to +% get the abstract environment to save its contents. It is no longer +% used, and now produces an error message. +% +% \begin{macrocode} +\newcommand{\acmopening}[1]{% + \ClassError{siggraph}{% + The acmopening command is no longer needed.\MessageBreak% + Switch to the maketitle command and abstract environment}{}} +% \end{macrocode} +% +% \subsection{Configurations file} +% +% Finally, we load the configuration file if it exists. +% +% \begin{macrocode} +\InputIfFileExists{siggraph.cfg} + {\typeout{***************************************^^J% + * Local config file siggraph.cfg used *^^J% + ***************************************}} + {} +% \end{macrocode} +% +% \iffalse +%</class> +% \fi +% +% \Finale diff --git a/Master/texmf-dist/source/latex/siggraph/siggraph.ins b/Master/texmf-dist/source/latex/siggraph/siggraph.ins new file mode 100644 index 00000000000..49967e5eede --- /dev/null +++ b/Master/texmf-dist/source/latex/siggraph/siggraph.ins @@ -0,0 +1,4 @@ +\def\batchfile{siggraph.ins} +\input docstrip.tex +\keepsilent +\generateFile{siggraph.cls}{t}{\from{siggraph.dtx}{class}} |