summaryrefslogtreecommitdiff
path: root/Master/texmf/web2c
diff options
context:
space:
mode:
authorStaszek Wawrykiewicz <staw@gust.org.pl>2008-07-12 17:39:20 +0000
committerStaszek Wawrykiewicz <staw@gust.org.pl>2008-07-12 17:39:20 +0000
commitb33d141235bb67cb9b7a298e8a0a8d0c40bced17 (patch)
treebc681102c4ee579c3054257cea6412bfb9a3dbb1 /Master/texmf/web2c
parent506653395a7b7a9578fba4691f03a290eeffd564 (diff)
texmf.cnf-4WIN deleted
git-svn-id: svn://tug.org/texlive/trunk@9481 c570f23f-e606-0410-a88d-b1316a301751
Diffstat (limited to 'Master/texmf/web2c')
-rw-r--r--Master/texmf/web2c/texmf.cnf-4WIN634
1 files changed, 0 insertions, 634 deletions
diff --git a/Master/texmf/web2c/texmf.cnf-4WIN b/Master/texmf/web2c/texmf.cnf-4WIN
deleted file mode 100644
index a0273092a34..00000000000
--- a/Master/texmf/web2c/texmf.cnf-4WIN
+++ /dev/null
@@ -1,634 +0,0 @@
-% original texmf.cnf -- runtime path configuration file for kpathsea.
-% (If you change or delete `original' on the previous line, the
-% distribution won't install its version over yours.)
-% Adapted for Win32 in TeX Live 2007 edition, this file should be
-% copied to $TEXMFVAR/web2c/
-% Public domain.
-%
-% This TeX Live texmf.cnf is not kept in sync with the teTeX texmf.cnf
-% (and not maintained by te), since the two distributions need different
-% settings.
-%
-% What follows is a super-summary of what this .cnf file can
-% contain. Please read the Kpathsea manual for more information.
-%
-% texmf.cnf is generated from texmf.in, by replacing @var@ with the
-% value of the Make variable `var', via a sed file texmf.sed, generated
-% (once) by kpathsea/Makefile (itself generated from kpathsea/Makefile.in
-% by configure).
-%
-% Any identifier (sticking to A-Za-z_ for names is safest) can be assigned.
-% The `=' (and surrounding spaces) is optional.
-% No % or @ in texmf.in, for the sake of autogeneration.
-% (However, %'s and @'s can be edited into texmf.cnf or put in envvar values.)
-% $foo (or ${foo}) in a value expands to the envvar or cnf value of foo.
-%
-% Earlier entries (in the same or another file) override later ones, and
-% an environment variable foo overrides any texmf.cnf definition of foo.
-%
-% All definitions are read before anything is expanded, so you can use
-% variables before they are defined.
-%
-% If a variable assignment is qualified with `.PROGRAM', it is ignored
-% unless the current executable (last filename component of argv[0]) is
-% named PROGRAM. This foo.PROGRAM construct is not recognized on the
-% right-hand side. For environment variables, use FOO_PROGRAM.
-%
-% Which file formats use which paths for searches is described in the
-% various programs' and the kpathsea documentation.
-%
-% // means to search subdirectories (recursively).
-% A leading !! means to look only in the ls-R db, never on the disk.
-% A leading/trailing/doubled ; in the paths will be expanded into the
-% compile-time default. Probably not what you want.
-%
-% You can use brace notation, for example: /usr/local/{mytex:othertex}
-% expands to /usr/local/mytex:/usr/local/othertex. Instead of the path
-% separator you can use a comma: /usr/local/{mytex,othertex} also expands
-% to /usr/local/mytex:/usr/local/othertex. However, the use of the comma
-% instead of the path separator is deprecated.
-%
-% The text above assumes thet path separator is a colon (:). Non-UNIX
-% systems use different path separators, like the semicolon (;).
-
-% Part 1: Search paths and directories.
-
-% You can set an environment variable to override TEXMF if you're testing
-% a new TeX tree, without changing anything else.
-%
-% You may wish to use one of the $SELFAUTO... variables here so TeX will
-% find where to look dynamically. See the manual and the definition
-% below of TEXMFCNF.
-
-% The tree containing the runtime files closely related to the specific
-% program version used:
-TEXMFMAIN = $SELFAUTOPARENT/texmf
-
-% The main distribution tree:
-TEXMFDIST = $SELFAUTOPARENT/texmf-dist
-
-% A place for local additions to a "standard" texmf tree.
-% This tree is not used for local configuration maintained by
-% texconfig, it uses TEXMFCONFIG below.
-TEXMFLOCAL = $SELFAUTOPARENT/../texmf-local
-
-% TEXMFSYSVAR, where texconfig-sys stores variable runtime data.
-% With teTeX-3.0 or later, this must be set.
-% For sharing this tree with $TEXMFMAIN:
-% TEXMFSYSVAR = $TEXMFMAIN
-% For using a separate tree:
-% TEXMFSYSVAR = $SELFAUTOPARENT/texmf-var
-%TEXMFSYSVAR = $SELFAUTOPARENT/texmf-var
-
-% TEXMFSYSCONFIG, where texconfig-sys stores configuration data.
-% With teTeX-3.0 or later, this must be set.
-% For sharing this tree with $TEXMFMAIN:
-% TEXMFSYSCONFIG = $TEXMFMAIN
-% For using a separate tree:
-% TEXMFSYSCONFIG = $SELFAUTOPARENT/texmf-config
-%TEXMFSYSCONFIG = $SELFAUTOPARENT/texmf-config
-
-% User texmf trees are allowed as follows.
-% This used to be HOMETEXMF. On Windows $HOME is usually not set, so users
-% have to set TEXMFHOME to the absolute path. For the moment we use TEXMFLOCAL
-%TEXMFHOME = $HOME/texmf
-TEXMFHOME = $TEXMFLOCAL
-
-% TEXMFVAR, where texconfig stores variable runtime data.
-% With teTeX-3.0 or later, this must be set.
-% For sharing this tree with $TEXMFMAIN:
-% TEXMFVAR = $TEXMFMAIN
-% For using a separate tree:
-% TEXMFVAR = $HOME/.texmf-var # teTeX 3.0 default
-%TEXMFVAR = $HOME/.texlive2006/texmf-var
-TEXMFVAR = $SELFAUTOPARENT/texmf-var
-
-% TEXMFCONFIG, where texconfig stores configuration data.
-% With teTeX-3.0 or later, this must be set.
-% For sharing this tree with $TEXMFMAIN:
-% TEXMFCONFIG = $TEXMFMAIN
-% For using a separate tree:
-% TEXMFCONFIG = $HOME/.texmf-config # teTeX 3.0 default
-% For using a separate tree:
-% TEXMFCONFIG = $SELFAUTOPARENT/texmf-config
-%TEXMFCONFIG = $HOME/.texlive2006/texmf-config
-
-% Now, list all the texmf trees. If you have multiple trees you can
-% use shell brace notation, like this:
-% TEXMF = {$TEXMFHOME,!!$TEXMFLOCAL,!!$TEXMFMAIN}
-% The braces are necessary.
-%
-% For texconfig to work properly, TEXMFCONFIG and TEXMFVAR should be named
-% explicitly and before all other trees.
-%TEXMF = {$TEXMFCONFIG,$TEXMFVAR,$TEXMFHOME,!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFMAIN,!!$TEXMFLOCAL,!!$TEXMFDIST}
-TEXMF = {!!$TEXMFVAR,$TEXMFHOME,!!$TEXMFMAIN,!!$TEXMFLOCAL,!!$TEXMFDIST}
-
-% The system trees. These are the trees that are shared by all the users.
-% If a tree appears in this list, the mktex* scripts will use
-% VARTEXFONTS for generated files, if the original tree isn't writable;
-% otherwise the current working directory is used.
-SYSTEXMF = $TEXMFLOCAL;$TEXMFMAIN;$TEXMFDIST
-
-% Where generated fonts may be written. This tree is used when the sources
-% were found in a system tree and either that tree wasn't writable, or the
-% varfonts feature was enabled in MT_FEATURES in mktex.cnf.
-VARTEXFONTS = $TEXMFVAR/fonts
-
-% Where to look for ls-R files. There need not be an ls-R in the
-% directories in this path, but if there is one, Kpathsea will use it.
-%
-% By default, this is only the !! elements of TEXMF, so that mktexlsr
-% does not create ls-R files in the non-!! elements -- because if an
-% ls-R is present, it will be used, and the disk will not be searched.
-% This is arguably a bug in kpathsea, but we will not think about it now.
-TEXMFDBS = {!!$TEXMFVAR,!!$TEXMFMAIN,!!$TEXMFLOCAL,!!$TEXMFDIST}
-%TEXMFDBS = $TEXMF
-
-% It may be convenient to define TEXMF like this:
-% TEXMF = {$TEXMFHOME,!!$TEXMFLOCAL,!!$TEXMFMAIN,$HOME}
-% which allows users to set up entire texmf trees, and tells TeX to
-% look in places like ~/tex and ~/bibtex. If you do this, define TEXMFDBS
-% like this:
-% TEXMFDBS = $TEXMFHOME;$TEXMFLOCAL;$TEXMFMAIN;$VARTEXFONTS
-% or mktexlsr will generate an ls-R file for $HOME when called, which is
-% rarely desirable. If you do this you'll want to define SYSTEXMF like
-% this:
-% SYSTEXMF = $TEXMFLOCAL;$TEXMFMAIN;$TEXMFDIST
-% so that fonts from a user's tree won't escape into the global trees.
-%
-% On some systems, there will be a system tree which contains all the font
-% files that may be created as well as the formats. For example
-% TEXMFVAR = /var/lib/texmf
-% is used on many Linux systems. In this case, set VARTEXFONTS like this
-% VARTEXFONTS = $TEXMFVAR/fonts
-% and do not mention it in TEXMFDBS (but _do_ mention TEXMFVAR).
-%
-% Remove $VARTEXFONTS from TEXMFDBS if the VARTEXFONTS directory is below
-% one of the TEXMF directories (avoids overlapping ls-R files).
-
-
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-% Usually you will not need to edit any of the other variables in part 1. %
-%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
-
-% WEB2C is for Web2C specific files. The current directory may not be
-% a good place to look for them.
-WEB2C = $TEXMF/web2c
-
-% TEXINPUTS is for TeX input files -- i.e., anything to be found by \input
-% or \openin, including .sty, .eps, etc.
-
-% Plain TeX. Have the command tex check all directories as a last
-% resort, we may have plain-compatible stuff anywhere.
-TEXINPUTS.tex = .;$TEXMF/tex/{plain,generic,}//
-
-% Other plain-based formats.
-TEXINPUTS.amstex = .;$TEXMF/tex/{amstex,plain,generic,}//
-TEXINPUTS.csplain = .;$TEXMF/tex/{csplain,plain,generic,}//
-TEXINPUTS.eplain = .;$TEXMF/tex/{eplain,plain,generic,}//
-TEXINPUTS.ftex = .;$TEXMF/tex/{formate,plain,generic,}//
-TEXINPUTS.jadetex = .;$TEXMF/tex/{jadetex,plain,generic,}//
-TEXINPUTS.mex = .;$TEXMF/tex/{mex,plain,generic,}//
-TEXINPUTS.texinfo = .;$TEXMF/tex/{texinfo,plain,generic,}//
-
-% LaTeX 2e specific macros are stored in latex/, macros that can only be
-% used with 2.09 in latex209/. In addition, we look in the directory
-% latex209, useful for macros that were written for 2.09 and do not
-% mention 2e at all, but can be used with 2e.
-TEXINPUTS.cslatex = .;$TEXMF/tex/{cslatex,csplain,latex,generic,}//
-TEXINPUTS.latex = .;$TEXMF/tex/{latex,generic,}//
-TEXINPUTS.olatex = .;$TEXMF/tex/{latex,generic,}//
-TEXINPUTS.latex209 = .;$TEXMF/tex/{latex209,generic,latex,}//
-
-% Fontinst needs to read afm files.
-TEXINPUTS.fontinst = .;$TEXMF/{tex,fonts/afm}//
-
-% MLTeX.
-TEXINPUTS.frlatex = .;$TEXMF/tex/{french,latex,generic,}//
-TEXINPUTS.frtex = .;$TEXMF/tex/{french,plain,generic,}//
-TEXINPUTS.mllatex = .;$TEXMF/tex/{latex,generic,}//
-TEXINPUTS.mltex = .;$TEXMF/tex/{plain,generic,}//
-
-% e-TeX. This form of the input paths is borrowed from teTeX. A certain
-% variant of TDS is assumed here, unaffected by the build variables.
-TEXINPUTS.elatex = .;$TEXMF/tex/{latex,generic,}//
-TEXINPUTS.etex = .;$TEXMF/tex/{plain,generic,}//
-
-% pdfTeX. This form of the input paths is borrowed from teTeX. A certain
-% variant of TDS is assumed here, unaffected by the build variables.
-TEXINPUTS.pdfcslatex = .;$TEXMF/tex/{cslatex,csplain,latex,generic,}//
-TEXINPUTS.pdfcsplain = .;$TEXMF/tex/{csplain,plain,generic,}//
-TEXINPUTS.pdfjadetex = .;$TEXMF/tex/{jadetex,plain,generic,}//
-TEXINPUTS.pdflatex = .;$TEXMF/tex/{latex,generic,}//
-TEXINPUTS.pdfmex = .;$TEXMF/tex/{mex,plain,generic,}//
-TEXINPUTS.utf8mex = .;$TEXMF/tex/{mex,plain,generic,}//
-TEXINPUTS.pdftex = .;$TEXMF/tex/{plain,generic,}//
-TEXINPUTS.pdftexinfo = .;$TEXMF/tex/{texinfo,plain,generic,}//
-TEXINPUTS.pdfamstex = .;$TEXMF/tex/{amstex,plain,generic,}//
-
-% pdfeTeX.
-TEXINPUTS.pdfelatex = .;$TEXMF/tex/{latex,generic,}//
-TEXINPUTS.pdfetex = .;$TEXMF/tex/{plain,generic,}//
-
-% pdfxTeX.
-TEXINPUTS.pdfxlatex = .;$TEXMF/tex/{latex,generic,}//
-TEXINPUTS.pdfxtex = .;$TEXMF/tex/{plain,generic,}//
-
-% XeTeX
-TEXINPUTS.xelatex = .;$TEXMF/tex/{xelatex,latex,generic,}//
-TEXINPUTS.xeplain = .;$TEXMF/tex/{xeplain,eplain,plain,generic,}//
-TEXINPUTS.xetex = .;$TEXMF/tex/{xetex,plain,generic,}//
-
-% Omega / Aleph
-TEXINPUTS.lamed = .;$TEXMF/tex/{lamed,lambda,latex,generic,}//
-TEXINPUTS.lambda = .;$TEXMF/tex/{lambda,latex,generic,}//
-TEXINPUTS.omega = .;$TEXMF/tex/{plain,generic,}//
-TEXINPUTS.aleph = .;$TEXMF/tex/{plain,generic,}//
-
-% ConTeXt
-TEXINPUTS.context = .;$TEXMF/tex/{context,plain,generic,}//
-
-% odd formats needing their own paths
-TEXINPUTS.lamstex = .;$TEXMF/tex/{lamstex,plain,generic,}//
-TEXINPUTS.lollipop = .;$TEXMF/tex/{lollipop,plain,generic,}//
-
-% Earlier entries override later ones, so put this last.
-TEXINPUTS = .;$TEXMF/tex/{$progname,generic,}//
-
-% extra format definitions for TeX Live
-
-TEXINPUTS.elambda = .;$TEXMF/tex/{lambda,latex,generic,}//
-TEXINPUTS.eomega = .;$TEXMF/tex/{plain,generic,}//
-TEXINPUTS.pdfxmex = .;$TEXMF/tex/{mex,plain,generic,}//
-TEXINPUTS.frpdflatex = .;$TEXMF/tex/{french,latex,generic,}//
-TEXINPUTS.frpdftex = .;$TEXMF/tex/{french,plain,generic,}//
-TEXINPUTS.xmltex = .;$TEXMF/tex/{xmltex,latex,generic,}//
-TEXINPUTS.pdfxmltex = .;$TEXMF/tex/{xmltex,latex,generic,}//
-
-TTF2TFMINPUTS = .;$TEXMF/ttf2pk//
-
-% Metafont, MetaPost inputs.
-MFINPUTS = .;$TEXMF/metafont//;{$TEXMF/fonts,$VARTEXFONTS}/source//
-MPINPUTS = .;$TEXMF/metapost//
-
-% allow for compressed files, and various extenions
-TEXDOCSSUFFIX = ;.pdf;.ps;.dvi;.html;.txt;.tex
-TEXDOCSCOMPRESS = ;.gz;.bz2;.zip;.Z
-TEXDOCEXT = {$TEXDOCSSUFFIX}{$TEXDOCSCOMPRESS}
-
-% Dump files (fmt/base/mem) for vir{tex,mf,mp} to read (see web2c/INSTALL),
-% and string pools (.pool) for ini{tex,mf,mp}. It is silly that we have six
-% paths and directories here (they all resolve to a single place by default),
-% but historically ...
-TEXFORMATS = .;$TEXMF/web2c/{$engine,}//
-MFBASES = .;$TEXMF/web2c/{$engine,}//
-MPMEMS = .;$TEXMF/web2c/{$engine,}//
-TEXPOOL = .;$TEXMF/web2c
-MFPOOL = .;$TEXMF/web2c
-MPPOOL = .;$TEXMF/web2c
-
-% support the original xdvi. Must come before the generic settings.
-PKFONTS.XDvi = .;$TEXMF/%s;$VARTEXFONTS/pk/{%m,modeless}//
-VFFONTS.XDvi = .;$TEXMF/%s
-PSHEADERS.XDvi = .;$TEXMF/%q{dvips,fonts/type1}//
-TEXPICTS.XDvi = .;$TEXMF/%q{dvips,tex}//
-
-% Device-independent font metric files.
-VFFONTS = .;$TEXMF/fonts/vf//
-TFMFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/tfm//
-
-% The $MAKETEX_MODE below means the drivers will not use a cx font when
-% the mode is ricoh. If no mode is explicitly specified, kpse_prog_init
-% sets MAKETEX_MODE to /, so all subdirectories are searched. See the manual.
-% The modeless part guarantees that bitmaps for PostScript fonts are found.
-PKFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/pk/{$MAKETEX_MODE,modeless}//
-
-% Similarly for the GF format, which only remains in existence because
-% Metafont outputs it (and MF isn't going to change).
-GFFONTS = .;$TEXMF/fonts/gf/$MAKETEX_MODE//
-
-% A backup for PKFONTS and GFFONTS. Not used for anything.
-GLYPHFONTS = .;$TEXMF/fonts
-
-% A place to puth everything that doesn't fit the other font categories.
-MISCFONTS = .;$TEXMF/fonts/misc//
-
-% font name map files. This isn't just fonts/map// because ConTeXt
-% wants support for having files with the same name in the different
-% subdirs. Maybe if the programs ever get unified to accepting the same
-% map file syntax the definition can be simplified again.
-TEXFONTMAPS = .;$TEXMF/fonts/map/{$progname,pdftex,dvips,}//
-
-% BibTeX bibliographies and style files.
-BIBINPUTS = .;$TEXMF/bibtex/bib//
-BSTINPUTS = .;$TEXMF/bibtex/{bst,csf}//
-% For bibtex8. Do we really need to repeat the BIBINPUTS setting?
-BIBINPUTS.bibtex8 = .;$TEXMF/bibtex/{bib,}//
-BSTINPUTS.bibtex8 = .;$TEXMF/bibtex/{bst,csf,}//
-
-% MFT style files.
-MFTINPUTS = .;$TEXMF/mft//
-
-% PostScript headers and prologues (.pro); unfortunately, some programs
-% also use this for acessing font files (enc, type1, truetype)
-TEXPSHEADERS = .;$TEXMF/{dvips,fonts/{enc,type1,type42,type3}}//
-TEXPSHEADERS.gsftopk = .;$TEXMF/{dvips,fonts/{enc,type1,type42,type3,truetype}}//
-
-% OSFONTDIR is to provide a convenient hook for allowing TeX to find
-% fonts installed on the system (outside of TeX). An empty default
-% value would add "//" to the search paths, so we give it a dummy value.
-%OSFONTDIR = /please/set/osfontdir/in/the/environment
-OSFONTDIR = $SystemRoot/fonts//
-
-% PostScript Type 1 outline fonts.
-T1FONTS = .;$TEXMF/fonts/type1//;$OSFONTDIR//
-
-% PostScript AFM metric files.
-AFMFONTS = .;$TEXMF/fonts/afm//;$OSFONTDIR//
-
-% TrueType outline fonts.
-TTFONTS = .;$TEXMF/fonts/truetype//;$OSFONTDIR//
-
-% Opentype outline fonts.
-OPENTYPEFONTS = .;$TEXMF/fonts/opentype//;$OSFONTDIR//
-
-% Type 42 outline fonts.
-T42FONTS = .;$TEXMF/fonts/type42//
-
-% Ligature definition files.
-LIGFONTS = .;$TEXMF/fonts/lig//
-
-% Dvips' config.* files (this name should not start with `TEX'!).
-TEXCONFIG = $TEXMF/dvips//
-
-% Makeindex style (.ist) files.
-INDEXSTYLE = .;$TEXMF/makeindex//
-
-% Font encoding files (.enc).
-ENCFONTS = .;$TEXMF/fonts/enc//
-
-% CMap files.
-CMAPFONTS = .;$TEXMF/fonts/cmap//
-
-% Subfont definition files.
-SFDFONTS = .;$TEXMF/fonts/sfd//
-
-% OpenType outline fonts.
-OPENTYPEFONTS = .;$TEXMF/fonts/opentype//
-
-% pdftex config files:
-PDFTEXCONFIG = .;$TEXMF/pdftex/{$progname,}//
-
-% Used by DMP (ditroff-to-mpx), called by makempx -troff.
-TRFONTS = /usr/{local,}/share/groff/{current/font,site-font}/devps
-MPSUPPORT = .;$TEXMF/metapost/support
-
-% For xdvi to find mime.types and .mailcap, if they do not exist in
-% $HOME. These are single directories, not paths.
-% (But the default mime.types, at least, may well suffice.)
-MIMELIBDIR = $SELFAUTOPARENT/etc
-MAILCAPLIBDIR = $SELFAUTOPARENT/etc
-
-% Default settings for fontconfig library, used by Win32 versions of
-% xetex/xdvipdfmx (note that fontconfig on Linux/Unix-like systems
-% will ignore settings in this file)
-FONTCONFIG_FILE=fonts.conf
-FONTCONFIG_PATH=$SELFAUTOLOC/conf
-FC_CACHEDIR=$SELFAUTOLOC/cache
-
-% TeX documentation and source files, for use with kpsewhich.
-% TeX Live has a separate hierarchy with just documentation, texmf-doc,
-% in addition to the doc files in the other hierarchies.
-TEXMFDOCDIR = $SELFAUTOPARENT/texmf-doc/doc
-TEXDOCS = .;$TEXMF/doc//;$TEXMFDOCDIR//
-TEXSOURCES = .;$TEXMF/source//
-
-% Web and CWeb input paths.
-WEBINPUTS = .;$TEXMF/web//
-CWEBINPUTS = .;$TEXMF/cweb//
-
-% Omega-related fonts and other files. The odd construction for OFMFONTS
-% makes it behave in the face of a definition of TFMFONTS. Unfortunately
-% no default substitution would take place for TFMFONTS, so an explicit
-% path is retained.
-OFMFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/{ofm,tfm}//
-OPLFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/opl//
-OVFFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/{ovf,vf}//
-OVPFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/ovp//
-OTPINPUTS = .;$TEXMF/omega/otp//
-OCPINPUTS = .;$TEXMF/omega/ocp//
-
-% Some additional input variables for several programs. If you add
-% a program that uses the 'other text files' or 'other binary files'
-% search formats, you'll want to add their variables here as well.
-T4HTINPUTS = .;$TEXMF/tex4ht//
-
-%% t4ht utility, sharing files with TeX4ht
-TEX4HTFONTSET=alias,iso8859,unicode
-TEX4HTINPUTS = .;$TEXMF/tex4ht/base//;$TEXMF/tex4ht/ht-fonts/{$TEX4HTFONTSET}//
-
-% Part for scripts that are distributed/installed in the texmf tree.
-
-% Architecture independent executables.
-TEXMFSCRIPTS = $TEXMF/scripts/{$engine,$progname,}//
-
-% Perl, Python, Ruby, Java scripts
-JAVAINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/java//
-LUAINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/lua//
-PERLINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/perl//
-PYTHONINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/python//
-RUBYINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/ruby//
-
-
-%% The mktex* scripts rely on KPSE_DOT. Do not set it in the environment.
-% KPSE_DOT = .
-
-% This definition isn't used from this .cnf file itself (that would be
-% paradoxical), but the compile-time default in paths.h is built from it.
-% The SELFAUTO* variables are set automatically from the location of
-% argv[0], in kpse_set_progname.
-%
-% The TETEXDIR stuff isn't likely to be relevant unless you're using
-% teTeX, but it doesn't hurt.
-%
-% For security reasons, it is better not to have . part of the path.
-%
-TEXMFCNF = {$SELFAUTOLOC,$SELFAUTODIR,$SELFAUTOPARENT}{,{/share,}/texmf{-local,}/web2c};/.$TETEXDIR
-
-# $progname: kpathsea v. 3.5.3 or later overwrites this at runtime. To
-# avoid empty expansions from binaries linked against an earlier
-# version of the library, we set $progname and $engine to something
-# non-empty:
-progname = unset
-engine = unset
-
-
-% Part 2: Non-path options.
-
-% Write .log/.dvi/etc. files here, if the current directory is unwritable.
-% TEXMFOUTPUT = /tmp
-
-% If a dynamic file creation fails, log the command to this file, in
-% either the current directory or TEXMFOUTPUT. Set to the
-% empty string or 0 to avoid logging.
-MISSFONT_LOG = missfont.log
-
-% Set to a colon-separated list of words specifying warnings to suppress.
-% To suppress everything, use TEX_HUSH = all; this is currently equivalent to
-% TEX_HUSH = checksum:lostchar:readable:special
-% To suppress nothing, use TEX_HUSH = none or do not set the variable at all.
-TEX_HUSH = none
-
-% Enable system commands via \write18{...}?
-shell_escape = f
-
-% Allow TeX \openin, \openout, or \input on filenames starting with `.'
-% (e.g., .rhosts) or outside the current tree (e.g., /etc/passwd)?
-% a (any) : any file can be opened.
-% r (restricted) : disallow opening "dotfiles".
-% p (paranoid) : as 'r' and disallow going to parent directories, and
-% restrict absolute paths to be under $TEXMFOUTPUT.
-openout_any = p
-openin_any = a
-
-% Disable search on multiple suffixes filenames. In many case, when `foo.bar'
-% is looked for, you do not want to look for `foo.bar.tex' before. This flag
-% disables searching for standard suffixes if the file name has already an
-% extension of 3 characters. Default value is true (old behaviour).
-allow_multiple_suffixes = f
-
-% Allow TeX, MF, and MP to parse the first line of an input file for
-% the %&format construct.
-parse_first_line = t
-
-% But don't parse the first line if invoked as "tex", since we want that
-% to remain Knuth-compatible. The src_specials and
-% file_line_error_style settings, as well as the options -enctex,
-% -mltex, -8bit, etc., also affect this, but they are all off by default.
-parse_first_line.tex = f
-
-% Control file:line:error style messages.
-file_line_error_style = f
-
-% Enable the mktex... scripts by default? These must be set to 0 or 1.
-% Particular programs can and do override these settings, for example
-% dvips's -M option. Your first chance to specify whether the scripts
-% are invoked by default is at configure time.
-%
-% These values are ignored if the script names are changed; e.g., if you
-% set DVIPSMAKEPK to `foo', what counts is the value of the environment
-% variable/config value `FOO', not the `MKTEXPK' value.
-%
-% MKTEXTEX = 0
-% MKTEXPK = 0
-% MKTEXMF = 0
-% MKTEXTFM = 0
-% MKTEXFMT = 0
-% MKOCP = 0
-% MKOFM = 0
-
-% What MetaPost runs to make MPX files. This is passed an option -troff
-% if MP is in troff mode. Set to `0' to disable this feature.
-MPXCOMMAND = makempx
-
-% Used by makempx to run TeX. We use "etex" because MetaPost is
-% expecting DVI, and not "tex" because we want first line parsing.
-TEX = etex
-
-
-% Part 3: Array and other sizes for TeX (and Metafont and MetaPost).
-%
-% If you want to change some of these sizes only for a certain TeX
-% variant, the usual dot notation works, e.g.,
-% main_memory.hugetex = 20000000
-%
-% If a change here appears to be ignored, try redumping the format file.
-
-% Memory. Must be less than 8,000,000 total.
-%
-% main_memory is relevant only to initex, extra_mem_* only to non-ini.
-% Thus, have to redump the .fmt file after changing main_memory; to add
-% to existing fmt files, increase extra_mem_*. (To get an idea of how
-% much, try \tracingstats=2 in your TeX source file;
-% web2c/tests/memtest.tex might also be interesting.)
-%
-% To increase space for boxes (as might be needed by, e.g., PiCTeX),
-% increase extra_mem_bot.
-%
-% For some xy-pic samples, you may need as much as 700000 words of memory.
-% For the vast majority of documents, 60000 or less will do.
-%
-main_memory = 1500000 % words of inimemory available; also applies to inimf&mp
-extra_mem_top = 0 % extra high memory for chars, tokens, etc.
-extra_mem_bot = 0 % extra low memory for boxes, glue, breakpoints, etc.
-
-% ConTeXt needs lots of memory.
-extra_mem_top.context = 2000000
-extra_mem_bot.context = 4000000
-
-% Words of font info for TeX (total size of all TFM files, approximately).
-% Must be >= 20000 and <= 4000000 (without tex.ch changes).
-font_mem_size = 1200000
-
-% Total number of fonts. Must be >= 50 and <= 2000 (without tex.ch changes).
-font_max = 2000
-
-% Extra space for the hash table of control sequences (which allows 10K
-% names as distributed).
-hash_extra = 50000
-
-% Max number of characters in all strings, including all error messages,
-% help texts, font names, control sequences. These values apply to TeX and MP.
-pool_size = 1250000
-% Minimum pool space after TeX/MP's own strings; must be at least
-% 25000 less than pool_size, but doesn't need to be nearly that large.
-string_vacancies = 90000
-% Maximum number of strings.
-max_strings = 100000
-% min pool space left after loading .fmt
-pool_free = 47500
-
-% Buffer size. TeX uses the buffer to contain input lines, but macro
-% expansion works by writing material into the buffer and reparsing the
-% line. As a consequence, certain constructs require the buffer to be
-% very large, even though most documents can be handled with a small value.
-buf_size = 200000
-
-% Hyphenation trie. The maximum possible is 4194303 (ssup_trie_size in
-% the sources), but we don't need that much. The value here suffices
-% for all known free hyphenation patterns to be loaded simultaneously
-% (as TeX Live does).
-%
-trie_size = 300000
-
-hyph_size = 8191 % prime number of hyphenation exceptions, >610, <32767.
- % http://primes.utm.edu/curios/page.php/8191.html
-nest_size = 500 % simultaneous semantic levels (e.g., groups)
-max_in_open = 15 % simultaneous input files and error insertions
-param_size = 10000 % simultaneous macro parameters
-save_size = 5000 % for saving values outside current group
-stack_size = 5000 % simultaneous input sources
-
-% These are Omega-specific.
-ocp_buf_size = 500000 % character buffers for ocp filters.
-ocp_stack_size = 10000 % stacks for ocp computations.
-ocp_list_size = 1000 % control for multiple ocps.
-
-% Parameter specific to MetaPost.
-% Maximum number of knots between breakpoints of a path.
-% Set to 2000 by default.
-% path_size.mpost = 10000
-
-% These work best if they are the same as the I/O buffer size, but it
-% doesn't matter much. Must be a multiple of 8.
-dvi_buf_size = 16384 % TeX
-gf_buf_size = 16384 % MF
-
-% It's probably inadvisable to change these. At any rate, we must have:
-% 45 < error_line < 255;
-% 30 < half_error_line < error_line - 15;
-% 60 <= max_print_line;
-% These apply to Metafont and MetaPost as well.
-error_line = 79
-half_error_line = 50
-max_print_line = 79